ovs-sandbox: Add note about OVN to initial output.
[cascardo/ovs.git] / lib / netdev-provider.h
index 7862c2d..2aa1b5d 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009, 2010, 2011, 2012, 2013, 2014 Nicira, Inc.
+ * Copyright (c) 2009, 2010, 2011, 2012, 2013, 2014, 2016 Nicira, Inc.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -52,12 +52,16 @@ struct netdev {
      * 'netdev''s flags, features, ethernet address, or carrier changes. */
     uint64_t change_seq;
 
-    /* The following are protected by 'netdev_mutex' (internal to netdev.c). */
+    /* The core netdev code initializes these at netdev construction and only
+     * provide read-only access to its client.  Netdev implementations may
+     * modify them. */
     int n_txq;
     int n_rxq;
+    /* Number of rx queues requested by user. */
+    int requested_n_rxq;
     int ref_cnt;                        /* Times this devices was opened. */
     struct shash_node *node;            /* Pointer to element in global map. */
-    struct list saved_flags_list; /* Contains "struct netdev_saved_flags". */
+    struct ovs_list saved_flags_list; /* Contains "struct netdev_saved_flags". */
 };
 
 static void
@@ -177,7 +181,7 @@ struct netdev *netdev_rxq_get_netdev(const struct netdev_rxq *);
  * not yet been uninitialized, so the "destruct" function may refer to it.  The
  * "destruct" function is not allowed to fail.
  *
- * Each "dealloc" function frees raw memory that was allocated by the the
+ * Each "dealloc" function frees raw memory that was allocated by the
  * "alloc" function.  The memory's base and derived members might not have ever
  * been initialized (but if "construct" returned successfully, then it has been
  * "destruct"ed already).  The "dealloc" function is not allowed to fail.
@@ -255,6 +259,22 @@ struct netdev_class {
     const struct netdev_tunnel_config *
         (*get_tunnel_config)(const struct netdev *netdev);
 
+    /* Build Partial Tunnel header.  Ethernet and ip header is already built,
+     * build_header() is suppose build protocol specific part of header. */
+    int (*build_header)(const struct netdev *, struct ovs_action_push_tnl *data,
+                        const struct flow *tnl_flow);
+
+    /* build_header() can not build entire header for all packets for given
+     * flow.  Push header is called for packet to build header specific to
+     * a packet on actual transmit.  It uses partial header build by
+     * build_header() which is passed as data. */
+    void (*push_header)(struct dp_packet *packet,
+                        const struct ovs_action_push_tnl *data);
+
+    /* Pop tunnel header from packet, build tunnel metadata and resize packet
+     * for further processing. */
+    int (*pop_header)(struct dp_packet *packet);
+
     /* Returns the id of the numa node the 'netdev' is on.  If there is no
      * such info, returns NETDEV_NUMA_UNSPEC. */
     int (*get_numa_id)(const struct netdev *netdev);
@@ -262,6 +282,17 @@ struct netdev_class {
     /* Configures the number of tx queues and rx queues of 'netdev'.
      * Return 0 if successful, otherwise a positive errno value.
      *
+     * 'n_rxq' specifies the maximum number of receive queues to create.
+     * The netdev provider might choose to create less (e.g. if the hardware
+     * supports only a smaller number).  The actual number of queues created
+     * is stored in the 'netdev->n_rxq' field.
+     *
+     * 'n_txq' specifies the exact number of transmission queues to create.
+     * The caller will call netdev_send() concurrently from 'n_txq' different
+     * threads (with different qid).  The netdev provider is responsible for
+     * making sure that these concurrent calls do not create a race condition
+     * by using multiple hw queues or locking.
+     *
      * On error, the tx queue and rx queue configuration is indeterminant.
      * Caller should make decision on whether to restore the previous or
      * the default configuration.  Also, caller must make sure there is no
@@ -278,7 +309,9 @@ struct netdev_class {
      * If the function returns a non-zero value, some of the packets might have
      * been sent anyway.
      *
-     * To retain ownership of 'buffers' caller can set may_steal to false.
+     * If 'may_steal' is false, the caller retains ownership of all the
+     * packets.  If 'may_steal' is true, the caller transfers ownership of all
+     * the packets to the network device, regardless of success.
      *
      * The network device is expected to maintain one or more packet
      * transmission queues, so that the caller does not ordinarily have to
@@ -292,7 +325,7 @@ struct netdev_class {
      * network device from being usefully used by the netdev-based "userspace
      * datapath".  It will also prevent the OVS implementation of bonding from
      * working properly over 'netdev'.) */
-    int (*send)(struct netdev *netdev, int qid, struct dpif_packet **buffers,
+    int (*send)(struct netdev *netdev, int qid, struct dp_packet **buffers,
                 int cnt, bool may_steal);
 
     /* Registers with the poll loop to wake up from the next call to
@@ -310,15 +343,13 @@ struct netdev_class {
     void (*send_wait)(struct netdev *netdev, int qid);
 
     /* Sets 'netdev''s Ethernet address to 'mac' */
-    int (*set_etheraddr)(struct netdev *netdev,
-                         const uint8_t mac[ETH_ADDR_LEN]);
+    int (*set_etheraddr)(struct netdev *netdev, const struct eth_addr mac);
 
     /* Retrieves 'netdev''s Ethernet address into 'mac'.
      *
      * This address will be advertised as 'netdev''s MAC address through the
      * OpenFlow protocol, among other uses. */
-    int (*get_etheraddr)(const struct netdev *netdev,
-                         uint8_t mac[ETH_ADDR_LEN]);
+    int (*get_etheraddr)(const struct netdev *netdev, struct eth_addr *mac);
 
     /* Retrieves 'netdev''s MTU into '*mtup'.
      *
@@ -367,7 +398,7 @@ struct netdev_class {
 
     /* Forces ->get_carrier() to poll 'netdev''s MII registers for link status
      * instead of checking 'netdev''s carrier.  'netdev''s MII registers will
-     * be polled once ever 'interval' milliseconds.  If 'netdev' does not
+     * be polled once every 'interval' milliseconds.  If 'netdev' does not
      * support MII, another method may be used as a fallback.  If 'interval' is
      * less than or equal to zero, reverts ->get_carrier() to its normal
      * behavior.
@@ -656,7 +687,7 @@ struct netdev_class {
      * This function may be set to null if it would always return EOPNOTSUPP
      * anyhow. */
     int (*arp_lookup)(const struct netdev *netdev, ovs_be32 ip,
-                      uint8_t mac[ETH_ADDR_LEN]);
+                      struct eth_addr *mac);
 
     /* Retrieves the current set of flags on 'netdev' into '*old_flags'.  Then,
      * turns off the flags that are set to 1 in 'off' and turns on the flags
@@ -693,7 +724,7 @@ struct netdev_class {
      * Caller is expected to pass array of size MAX_RX_BATCH.
      * This function may be set to null if it would always return EOPNOTSUPP
      * anyhow. */
-    int (*rxq_recv)(struct netdev_rxq *rx, struct dpif_packet **pkts,
+    int (*rxq_recv)(struct netdev_rxq *rx, struct dp_packet **pkts,
                     int *cnt);
 
     /* Registers with the poll loop to wake up from the next call to