#define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
jiffies + HZ * t / 1000))
-#define dot11MeshMaxRetries(s) (s->u.mesh.mshcfg.dot11MeshMaxRetries)
-#define dot11MeshRetryTimeout(s) (s->u.mesh.mshcfg.dot11MeshRetryTimeout)
-#define dot11MeshConfirmTimeout(s) (s->u.mesh.mshcfg.dot11MeshConfirmTimeout)
-#define dot11MeshHoldingTimeout(s) (s->u.mesh.mshcfg.dot11MeshHoldingTimeout)
-#define dot11MeshMaxPeerLinks(s) (s->u.mesh.mshcfg.dot11MeshMaxPeerLinks)
-
/* We only need a valid sta if user configured a minimum rssi_threshold. */
#define rssi_threshold_check(sta, sdata) \
(sdata->u.mesh.mshcfg.rssi_threshold == 0 ||\
static inline
u32 mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata)
{
- atomic_inc(&sdata->u.mesh.mshstats.estab_plinks);
+ atomic_inc(&sdata->u.mesh.estab_plinks);
return mesh_accept_plinks_update(sdata);
}
static inline
u32 mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
{
- atomic_dec(&sdata->u.mesh.mshstats.estab_plinks);
+ atomic_dec(&sdata->u.mesh.estab_plinks);
return mesh_accept_plinks_update(sdata);
}
u16 ht_opmode;
bool non_ht_sta = false, ht20_sta = false;
- if (sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT)
+ if (sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
return 0;
rcu_read_lock();
sta->plink_state != NL80211_PLINK_ESTAB)
continue;
- switch (sta->ch_type) {
- case NL80211_CHAN_NO_HT:
+ switch (sta->ch_width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
mpl_dbg(sdata,
"mesh_plink %pM: nonHT sta (%pM) is present\n",
sdata->vif.addr, sta->sta.addr);
non_ht_sta = true;
goto out;
- case NL80211_CHAN_HT20:
+ case NL80211_CHAN_WIDTH_20:
mpl_dbg(sdata,
"mesh_plink %pM: HT20 sta (%pM) is present\n",
sdata->vif.addr, sta->sta.addr);
if (non_ht_sta)
ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED;
else if (ht20_sta &&
- sdata->vif.bss_conf.channel_type > NL80211_CHAN_HT20)
+ sdata->vif.bss_conf.chandef.width > NL80211_CHAN_WIDTH_20)
ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_20MHZ;
else
ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
mgmt->u.action.u.self_prot.action_code = action;
if (action != WLAN_SP_MESH_PEERING_CLOSE) {
+ enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
+
/* capability info */
pos = skb_put(skb, 2);
memset(pos, 0, 2);
pos = skb_put(skb, 2);
memcpy(pos + 2, &plid, 2);
}
- if (ieee80211_add_srates_ie(sdata, skb, true,
- local->oper_channel->band) ||
- ieee80211_add_ext_srates_ie(sdata, skb, true,
- local->oper_channel->band) ||
+ if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
+ ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
mesh_add_rsn_ie(skb, sdata) ||
mesh_add_meshid_ie(skb, sdata) ||
mesh_add_meshconf_ie(skb, sdata))
struct ieee802_11_elems *elems)
{
struct ieee80211_local *local = sdata->local;
- enum ieee80211_band band = local->oper_channel->band;
+ enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
struct ieee80211_supported_band *sband;
u32 rates, basic_rates = 0;
struct sta_info *sta;
sta->sta.supp_rates[band] = rates;
if (elems->ht_cap_elem &&
- sdata->vif.bss_conf.channel_type != NL80211_CHAN_NO_HT)
+ sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT)
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
elems->ht_cap_elem,
&sta->sta.ht_cap);
memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap));
if (elems->ht_operation) {
+ struct cfg80211_chan_def chandef;
+
if (!(elems->ht_operation->ht_param &
IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
sta->sta.ht_cap.cap &=
~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- sta->ch_type =
- ieee80211_ht_oper_to_channel_type(elems->ht_operation);
+ ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan,
+ elems->ht_operation, &chandef);
+ sta->ch_width = chandef.width;
}
- rate_control_rate_init(sta);
+ if (insert)
+ rate_control_rate_init(sta);
spin_unlock_bh(&sta->lock);
if (insert && sta_info_insert(sta))
struct sta_info *sta;
__le16 llid, plid, reason;
struct ieee80211_sub_if_data *sdata;
+ struct mesh_config *mshcfg;
/*
* This STA is valid because sta_info_destroy() will
llid = sta->llid;
plid = sta->plid;
sdata = sta->sdata;
+ mshcfg = &sdata->u.mesh.mshcfg;
switch (sta->plink_state) {
case NL80211_PLINK_OPN_RCVD:
case NL80211_PLINK_OPN_SNT:
/* retry timer */
- if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
+ if (sta->plink_retries < mshcfg->dot11MeshMaxRetries) {
u32 rand;
mpl_dbg(sta->sdata,
"Mesh plink for %pM (retry, timeout): %d %d\n",
if (!reason)
reason = cpu_to_le16(WLAN_REASON_MESH_CONFIRM_TIMEOUT);
sta->plink_state = NL80211_PLINK_HOLDING;
- mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
+ mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
spin_unlock_bh(&sta->lock);
mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
sta->sta.addr, llid, plid, reason);
return -EBUSY;
}
sta->plink_state = NL80211_PLINK_OPN_SNT;
- mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
+ mesh_plink_timer_set(sta, sdata->u.mesh.mshcfg.dot11MeshRetryTimeout);
spin_unlock_bh(&sta->lock);
mpl_dbg(sdata,
"Mesh plink: starting establishment with %pM\n",
void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt,
size_t len, struct ieee80211_rx_status *rx_status)
{
+ struct mesh_config *mshcfg = &sdata->u.mesh.mshcfg;
struct ieee802_11_elems elems;
struct sta_info *sta;
enum plink_event event;
sta->plid = plid;
get_random_bytes(&llid, 2);
sta->llid = llid;
- mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
+ mesh_plink_timer_set(sta,
+ mshcfg->dot11MeshRetryTimeout);
spin_unlock_bh(&sta->lock);
mesh_plink_frame_tx(sdata,
WLAN_SP_MESH_PEERING_OPEN,
sta->reason = reason;
sta->plink_state = NL80211_PLINK_HOLDING;
if (!mod_plink_timer(sta,
- dot11MeshHoldingTimeout(sdata)))
+ mshcfg->dot11MeshHoldingTimeout))
sta->ignore_plink_timer = true;
llid = sta->llid;
case CNF_ACPT:
sta->plink_state = NL80211_PLINK_CNF_RCVD;
if (!mod_plink_timer(sta,
- dot11MeshConfirmTimeout(sdata)))
+ mshcfg->dot11MeshConfirmTimeout))
sta->ignore_plink_timer = true;
spin_unlock_bh(&sta->lock);
sta->reason = reason;
sta->plink_state = NL80211_PLINK_HOLDING;
if (!mod_plink_timer(sta,
- dot11MeshHoldingTimeout(sdata)))
+ mshcfg->dot11MeshHoldingTimeout))
sta->ignore_plink_timer = true;
llid = sta->llid;
sta->reason = reason;
sta->plink_state = NL80211_PLINK_HOLDING;
if (!mod_plink_timer(sta,
- dot11MeshHoldingTimeout(sdata)))
+ mshcfg->dot11MeshHoldingTimeout))
sta->ignore_plink_timer = true;
llid = sta->llid;
changed |= __mesh_plink_deactivate(sta);
sta->plink_state = NL80211_PLINK_HOLDING;
llid = sta->llid;
- mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
+ mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
spin_unlock_bh(&sta->lock);
changed |= mesh_set_ht_prot_mode(sdata);
mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
projects / cascardo / linux.git / blobdiff