#include "rate.h"
#include "led.h"
-#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
-#define IEEE80211_AUTH_MAX_TRIES 3
-#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
-#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
-#define IEEE80211_ASSOC_MAX_TRIES 3
+#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
+#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
+#define IEEE80211_AUTH_MAX_TRIES 3
+#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
+#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
+#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
+#define IEEE80211_ASSOC_MAX_TRIES 3
static int max_nullfunc_tries = 2;
module_param(max_nullfunc_tries, int, 0644);
/* caller must call cfg80211_send_assoc_timeout() */
RX_MGMT_CFG80211_ASSOC_TIMEOUT,
+
+ /* used when a processed beacon causes a deauth */
+ RX_MGMT_CFG80211_TX_DEAUTH,
};
/* utils */
return (1 << ecw) - 1;
}
-static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_ht_operation *ht_oper,
- const u8 *bssid, bool reconfig)
+static u32 chandef_downgrade(struct cfg80211_chan_def *c)
+{
+ u32 ret;
+ int tmp;
+
+ switch (c->width) {
+ case NL80211_CHAN_WIDTH_20:
+ c->width = NL80211_CHAN_WIDTH_20_NOHT;
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ c->width = NL80211_CHAN_WIDTH_20;
+ c->center_freq1 = c->chan->center_freq;
+ ret = IEEE80211_STA_DISABLE_40MHZ |
+ IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
+ /* n_P40 */
+ tmp /= 2;
+ /* freq_P40 */
+ c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
+ c->width = NL80211_CHAN_WIDTH_40;
+ ret = IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_80P80:
+ c->center_freq2 = 0;
+ c->width = NL80211_CHAN_WIDTH_80;
+ ret = IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_160:
+ /* n_P20 */
+ tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
+ /* n_P80 */
+ tmp /= 4;
+ c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
+ c->width = NL80211_CHAN_WIDTH_80;
+ ret = IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ;
+ break;
+ default:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ WARN_ON_ONCE(1);
+ c->width = NL80211_CHAN_WIDTH_20_NOHT;
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
+ }
+
+ WARN_ON_ONCE(!cfg80211_chandef_valid(c));
+
+ return ret;
+}
+
+static u32
+ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_channel *channel,
+ const struct ieee80211_ht_operation *ht_oper,
+ const struct ieee80211_vht_operation *vht_oper,
+ struct cfg80211_chan_def *chandef, bool verbose)
+{
+ struct cfg80211_chan_def vht_chandef;
+ u32 ht_cfreq, ret;
+
+ chandef->chan = channel;
+ chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+ chandef->center_freq1 = channel->center_freq;
+ chandef->center_freq2 = 0;
+
+ if (!ht_oper || !sband->ht_cap.ht_supported) {
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ chandef->width = NL80211_CHAN_WIDTH_20;
+
+ ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
+ channel->band);
+ /* check that channel matches the right operating channel */
+ if (channel->center_freq != ht_cfreq) {
+ /*
+ * It's possible that some APs are confused here;
+ * Netgear WNDR3700 sometimes reports 4 higher than
+ * the actual channel in association responses, but
+ * since we look at probe response/beacon data here
+ * it should be OK.
+ */
+ if (verbose)
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ channel->center_freq, ht_cfreq,
+ ht_oper->primary_chan, channel->band);
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ /* check 40 MHz support, if we have it */
+ if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+ switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ chandef->width = NL80211_CHAN_WIDTH_40;
+ chandef->center_freq1 += 10;
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ chandef->width = NL80211_CHAN_WIDTH_40;
+ chandef->center_freq1 -= 10;
+ break;
+ }
+ } else {
+ /* 40 MHz (and 80 MHz) must be supported for VHT */
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ if (!vht_oper || !sband->vht_cap.vht_supported) {
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ vht_chandef.chan = channel;
+ vht_chandef.center_freq1 =
+ ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
+ channel->band);
+ vht_chandef.center_freq2 = 0;
+
+ if (vht_oper->center_freq_seg2_idx)
+ vht_chandef.center_freq2 =
+ ieee80211_channel_to_frequency(
+ vht_oper->center_freq_seg2_idx,
+ channel->band);
+
+ switch (vht_oper->chan_width) {
+ case IEEE80211_VHT_CHANWIDTH_USE_HT:
+ vht_chandef.width = chandef->width;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80MHZ:
+ vht_chandef.width = NL80211_CHAN_WIDTH_80;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_160MHZ:
+ vht_chandef.width = NL80211_CHAN_WIDTH_160;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
+ vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
+ break;
+ default:
+ if (verbose)
+ sdata_info(sdata,
+ "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
+ vht_oper->chan_width);
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ if (!cfg80211_chandef_valid(&vht_chandef)) {
+ if (verbose)
+ sdata_info(sdata,
+ "AP VHT information is invalid, disable VHT\n");
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
+ ret = 0;
+ goto out;
+ }
+
+ if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
+ if (verbose)
+ sdata_info(sdata,
+ "AP VHT information doesn't match HT, disable VHT\n");
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ *chandef = vht_chandef;
+
+ ret = 0;
+
+out:
+ /* don't print the message below for VHT mismatch if VHT is disabled */
+ if (ret & IEEE80211_STA_DISABLE_VHT)
+ vht_chandef = *chandef;
+
+ while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
+ IEEE80211_CHAN_DISABLED)) {
+ if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
+ ret = IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ ret |= chandef_downgrade(chandef);
+ }
+
+ if (chandef->width != vht_chandef.width && verbose)
+ sdata_info(sdata,
+ "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
+
+ WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
+ return ret;
+}
+
+static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta,
+ const struct ieee80211_ht_operation *ht_oper,
+ const struct ieee80211_vht_operation *vht_oper,
+ const u8 *bssid, u32 *changed)
{
struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_supported_band *sband;
- struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_channel *chan;
- struct sta_info *sta;
- u32 changed = 0;
+ struct cfg80211_chan_def chandef;
u16 ht_opmode;
- bool disable_40 = false;
+ u32 flags;
+ enum ieee80211_sta_rx_bandwidth new_sta_bw;
+ int ret;
- rcu_read_lock();
- chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
- if (WARN_ON(!chanctx_conf)) {
- rcu_read_unlock();
+ /* if HT was/is disabled, don't track any bandwidth changes */
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
return 0;
- }
- chan = chanctx_conf->def.chan;
- rcu_read_unlock();
+
+ /* don't check VHT if we associated as non-VHT station */
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
+ vht_oper = NULL;
+
+ if (WARN_ON_ONCE(!sta))
+ return -EINVAL;
+
+ chan = sdata->vif.bss_conf.chandef.chan;
sband = local->hw.wiphy->bands[chan->band];
- switch (sdata->vif.bss_conf.chandef.width) {
+ /* calculate new channel (type) based on HT/VHT operation IEs */
+ flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
+ vht_oper, &chandef, false);
+
+ /*
+ * Downgrade the new channel if we associated with restricted
+ * capabilities. For example, if we associated as a 20 MHz STA
+ * to a 40 MHz AP (due to regulatory, capabilities or config
+ * reasons) then switching to a 40 MHz channel now won't do us
+ * any good -- we couldn't use it with the AP.
+ */
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
+ chandef.width == NL80211_CHAN_WIDTH_80P80)
+ flags |= chandef_downgrade(&chandef);
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
+ chandef.width == NL80211_CHAN_WIDTH_160)
+ flags |= chandef_downgrade(&chandef);
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
+ chandef.width > NL80211_CHAN_WIDTH_20)
+ flags |= chandef_downgrade(&chandef);
+
+ if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
+ return 0;
+
+ sdata_info(sdata,
+ "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
+ ifmgd->bssid, chandef.chan->center_freq, chandef.width,
+ chandef.center_freq1, chandef.center_freq2);
+
+ if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT |
+ IEEE80211_STA_DISABLE_40MHZ |
+ IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ)) ||
+ !cfg80211_chandef_valid(&chandef)) {
+ sdata_info(sdata,
+ "AP %pM changed bandwidth in a way we can't support - disconnect\n",
+ ifmgd->bssid);
+ return -EINVAL;
+ }
+
+ switch (chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
+ new_sta_bw = IEEE80211_STA_RX_BW_20;
+ break;
case NL80211_CHAN_WIDTH_40:
- if (sdata->vif.bss_conf.chandef.chan->center_freq >
- sdata->vif.bss_conf.chandef.center_freq1 &&
- chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
- disable_40 = true;
- if (sdata->vif.bss_conf.chandef.chan->center_freq <
- sdata->vif.bss_conf.chandef.center_freq1 &&
- chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
- disable_40 = true;
+ new_sta_bw = IEEE80211_STA_RX_BW_40;
break;
- default:
+ case NL80211_CHAN_WIDTH_80:
+ new_sta_bw = IEEE80211_STA_RX_BW_80;
+ break;
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ new_sta_bw = IEEE80211_STA_RX_BW_160;
break;
+ default:
+ return -EINVAL;
}
- /* This can change during the lifetime of the BSS */
- if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
- disable_40 = true;
-
- mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, bssid);
-
- WARN_ON_ONCE(!sta);
+ if (new_sta_bw > sta->cur_max_bandwidth)
+ new_sta_bw = sta->cur_max_bandwidth;
- if (sta && !sta->supports_40mhz)
- disable_40 = true;
-
- if (sta && (!reconfig ||
- (disable_40 != !(sta->sta.ht_cap.cap &
- IEEE80211_HT_CAP_SUP_WIDTH_20_40)))) {
+ if (new_sta_bw < sta->sta.bandwidth) {
+ sta->sta.bandwidth = new_sta_bw;
+ rate_control_rate_update(local, sband, sta,
+ IEEE80211_RC_BW_CHANGED);
+ }
- if (disable_40)
- sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- else
- sta->sta.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
+ if (ret) {
+ sdata_info(sdata,
+ "AP %pM changed bandwidth to incompatible one - disconnect\n",
+ ifmgd->bssid);
+ return ret;
+ }
+ if (new_sta_bw > sta->sta.bandwidth) {
+ sta->sta.bandwidth = new_sta_bw;
rate_control_rate_update(local, sband, sta,
IEEE80211_RC_BW_CHANGED);
}
- mutex_unlock(&local->sta_mtx);
ht_opmode = le16_to_cpu(ht_oper->operation_mode);
/* if bss configuration changed store the new one */
- if (!reconfig || (sdata->vif.bss_conf.ht_operation_mode != ht_opmode)) {
- changed |= BSS_CHANGED_HT;
+ if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+ *changed |= BSS_CHANGED_HT;
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
}
- return changed;
+ return 0;
}
/* frame sending functions */
static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb,
- struct ieee80211_supported_band *sband)
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_vht_cap *ap_vht_cap)
{
u8 *pos;
u32 cap;
struct ieee80211_sta_vht_cap vht_cap;
+ int i;
BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
}
+ /*
+ * Some APs apparently get confused if our capabilities are better
+ * than theirs, so restrict what we advertise in the assoc request.
+ */
+ if (!(ap_vht_cap->vht_cap_info &
+ cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
+ cap &= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
+
+ if (!(ap_vht_cap->vht_cap_info &
+ cpu_to_le32(IEEE80211_VHT_CAP_TXSTBC)))
+ cap &= ~(IEEE80211_VHT_CAP_RXSTBC_1 |
+ IEEE80211_VHT_CAP_RXSTBC_3 |
+ IEEE80211_VHT_CAP_RXSTBC_4);
+
+ for (i = 0; i < 8; i++) {
+ int shift = i * 2;
+ u16 mask = IEEE80211_VHT_MCS_NOT_SUPPORTED << shift;
+ u16 ap_mcs, our_mcs;
+
+ ap_mcs = (le16_to_cpu(ap_vht_cap->supp_mcs.tx_mcs_map) &
+ mask) >> shift;
+ our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) &
+ mask) >> shift;
+
+ if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
+ continue;
+
+ switch (ap_mcs) {
+ default:
+ if (our_mcs <= ap_mcs)
+ break;
+ /* fall through */
+ case IEEE80211_VHT_MCS_NOT_SUPPORTED:
+ vht_cap.vht_mcs.rx_mcs_map &= cpu_to_le16(~mask);
+ vht_cap.vht_mcs.rx_mcs_map |=
+ cpu_to_le16(ap_mcs << shift);
+ }
+ }
+
/* reserve and fill IE */
pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
sband, chan, sdata->smps_mode);
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
- ieee80211_add_vht_ie(sdata, skb, sband);
+ ieee80211_add_vht_ie(sdata, skb, sband,
+ &assoc_data->ap_vht_cap);
/* if present, add any custom non-vendor IEs that go after HT */
if (assoc_data->ie_len && assoc_data->ie) {
drv_mgd_prepare_tx(local, sdata);
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+ if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+ IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
+ IEEE80211_TX_INTFL_MLME_CONN_TX;
ieee80211_tx_skb(sdata, skb);
}
if (powersave)
nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
- IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+ IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
IEEE80211_STA_CONNECTION_POLL))
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
}
-void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_channel_sw_ie *sw_elem,
- struct ieee80211_bss *bss,
- u64 timestamp)
+void
+ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
+ const struct ieee80211_channel_sw_ie *sw_elem,
+ struct ieee80211_bss *bss, u64 timestamp)
{
struct cfg80211_bss *cbss =
container_of((void *)bss, struct cfg80211_bss, priv);
return 0;
}
-void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif)
-{
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_conf *conf = &local->hw.conf;
-
- WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION ||
- !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) ||
- (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS));
-
- local->disable_dynamic_ps = false;
- conf->dynamic_ps_timeout = local->dynamic_ps_user_timeout;
-}
-EXPORT_SYMBOL(ieee80211_enable_dyn_ps);
-
-void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif)
-{
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_conf *conf = &local->hw.conf;
-
- WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION ||
- !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) ||
- (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS));
-
- local->disable_dynamic_ps = true;
- conf->dynamic_ps_timeout = 0;
- del_timer_sync(&local->dynamic_ps_timer);
- ieee80211_queue_work(&local->hw,
- &local->dynamic_ps_enable_work);
-}
-EXPORT_SYMBOL(ieee80211_disable_dyn_ps);
-
-/* powersave */
-static void ieee80211_enable_ps(struct ieee80211_local *local,
- struct ieee80211_sub_if_data *sdata)
+/* powersave */
+static void ieee80211_enable_ps(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_conf *conf = &local->hw.conf;
}
if (count == 1 && ieee80211_powersave_allowed(found)) {
- struct ieee80211_conf *conf = &local->hw.conf;
s32 beaconint_us;
if (latency < 0)
else
timeout = 100;
}
- local->dynamic_ps_user_timeout = timeout;
- if (!local->disable_dynamic_ps)
- conf->dynamic_ps_timeout =
- local->dynamic_ps_user_timeout;
+ local->hw.conf.dynamic_ps_timeout = timeout;
if (beaconint_us > latency) {
local->ps_sdata = NULL;
if (local->hw.conf.flags & IEEE80211_CONF_PS)
return;
- if (!local->disable_dynamic_ps &&
- local->hw.conf.dynamic_ps_timeout > 0) {
+ if (local->hw.conf.dynamic_ps_timeout > 0) {
/* don't enter PS if TX frames are pending */
if (drv_tx_frames_pending(local)) {
mod_timer(&local->dynamic_ps_timer, jiffies +
ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
}
+void ieee80211_dfs_cac_timer_work(struct work_struct *work)
+{
+ struct delayed_work *delayed_work =
+ container_of(work, struct delayed_work, work);
+ struct ieee80211_sub_if_data *sdata =
+ container_of(delayed_work, struct ieee80211_sub_if_data,
+ dfs_cac_timer_work);
+
+ ieee80211_vif_release_channel(sdata);
+
+ cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_FINISHED, GFP_KERNEL);
+}
+
/* MLME */
static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
- u8 *wmm_param, size_t wmm_param_len)
+ const u8 *wmm_param, size_t wmm_param_len)
{
struct ieee80211_tx_queue_params params;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
size_t left;
int count;
- u8 *pos, uapsd_queues = 0;
+ const u8 *pos;
+ u8 uapsd_queues = 0;
if (!local->ops->conf_tx)
return false;
ieee80211_led_assoc(local, 1);
- if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) {
+ if (sdata->u.mgd.assoc_data->have_beacon) {
/*
* If the AP is buggy we may get here with no DTIM period
* known, so assume it's 1 which is the only safe assumption
* probably just won't work at all.
*/
bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
+ bss_info_changed |= BSS_CHANGED_DTIM_PERIOD;
} else {
bss_conf->dtim_period = 0;
}
bss_info_changed |= BSS_CHANGED_CQM;
/* Enable ARP filtering */
- if (bss_conf->arp_filter_enabled != sdata->arp_filter_state) {
- bss_conf->arp_filter_enabled = sdata->arp_filter_state;
+ if (bss_conf->arp_addr_cnt)
bss_info_changed |= BSS_CHANGED_ARP_FILTER;
- }
ieee80211_bss_info_change_notify(sdata, bss_info_changed);
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
u32 changed = 0;
ASSERT_MGD_MTX(ifmgd);
netif_tx_stop_all_queues(sdata->dev);
netif_carrier_off(sdata->dev);
- mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, ifmgd->bssid);
- if (sta) {
- set_sta_flag(sta, WLAN_STA_BLOCK_BA);
- ieee80211_sta_tear_down_BA_sessions(sta, false);
- }
- mutex_unlock(&local->sta_mtx);
-
/*
* if we want to get out of ps before disassoc (why?) we have
* to do it before sending disassoc, as otherwise the null-packet
cancel_work_sync(&local->dynamic_ps_enable_work);
/* Disable ARP filtering */
- if (sdata->vif.bss_conf.arp_filter_enabled) {
- sdata->vif.bss_conf.arp_filter_enabled = false;
+ if (sdata->vif.bss_conf.arp_addr_cnt)
changed |= BSS_CHANGED_ARP_FILTER;
- }
sdata->vif.bss_conf.qos = false;
changed |= BSS_CHANGED_QOS;
if (!ieee80211_is_data(hdr->frame_control))
return;
- if (ack)
- ieee80211_sta_reset_conn_monitor(sdata);
-
if (ieee80211_is_nullfunc(hdr->frame_control) &&
sdata->u.mgd.probe_send_count > 0) {
if (ack)
- sdata->u.mgd.probe_send_count = 0;
+ ieee80211_sta_reset_conn_monitor(sdata);
else
sdata->u.mgd.nullfunc_failed = true;
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+ return;
}
+
+ if (ack)
+ ieee80211_sta_reset_conn_monitor(sdata);
}
static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
ssid_len = ssid[1];
ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid_len, NULL,
- 0, (u32) -1, true, false,
+ 0, (u32) -1, true, 0,
ifmgd->associated->channel, false);
rcu_read_unlock();
}
if (beacon)
mlme_dbg_ratelimited(sdata,
- "detected beacon loss from AP - sending probe request\n");
+ "detected beacon loss from AP - probing\n");
ieee80211_cqm_rssi_notify(&sdata->vif,
NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL);
}
EXPORT_SYMBOL(ieee80211_ap_probereq_get);
-static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata,
- bool transmit_frame)
+static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
mutex_lock(&ifmgd->mtx);
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
- transmit_frame, frame_buf);
+ true, frame_buf);
ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
+ ieee80211_wake_queues_by_reason(&sdata->local->hw,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
mutex_unlock(&ifmgd->mtx);
/*
* but that's not a problem.
*/
cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN);
-
- mutex_lock(&local->mtx);
- ieee80211_recalc_idle(local);
- mutex_unlock(&local->mtx);
}
static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
rcu_read_unlock();
}
- if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) {
+ if (ifmgd->connection_loss) {
sdata_info(sdata, "Connection to AP %pM lost\n",
ifmgd->bssid);
- __ieee80211_disconnect(sdata, false);
+ __ieee80211_disconnect(sdata);
} else {
ieee80211_mgd_probe_ap(sdata, true);
}
container_of(work, struct ieee80211_sub_if_data,
u.mgd.csa_connection_drop_work);
- ieee80211_wake_queues_by_reason(&sdata->local->hw,
- IEEE80211_QUEUE_STOP_REASON_CSA);
- __ieee80211_disconnect(sdata, true);
+ __ieee80211_disconnect(sdata);
}
void ieee80211_beacon_loss(struct ieee80211_vif *vif)
trace_api_beacon_loss(sdata);
WARN_ON(hw->flags & IEEE80211_HW_CONNECTION_MONITOR);
+ sdata->u.mgd.connection_loss = false;
ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
}
EXPORT_SYMBOL(ieee80211_beacon_loss);
trace_api_connection_loss(sdata);
- WARN_ON(!(hw->flags & IEEE80211_HW_CONNECTION_MONITOR));
+ sdata->u.mgd.connection_loss = true;
ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
}
EXPORT_SYMBOL(ieee80211_connection_loss);
ieee80211_vif_release_channel(sdata);
}
- cfg80211_put_bss(auth_data->bss);
+ cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
kfree(auth_data);
sdata->u.mgd.auth_data = NULL;
}
static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len)
{
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
u8 *pos;
struct ieee802_11_elems elems;
+ u32 tx_flags = 0;
pos = mgmt->u.auth.variable;
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
return;
auth_data->expected_transaction = 4;
drv_mgd_prepare_tx(sdata->local, sdata);
+ if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+ tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
+ IEEE80211_TX_INTFL_MLME_CONN_TX;
ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
elems.challenge - 2, elems.challenge_len + 2,
auth_data->bss->bssid, auth_data->bss->bssid,
auth_data->key, auth_data->key_len,
- auth_data->key_idx);
+ auth_data->key_idx, tx_flags);
}
static enum rx_mgmt_action __must_check
sdata_info(sdata, "authenticated\n");
ifmgd->auth_data->done = true;
ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
+ ifmgd->auth_data->timeout_started = true;
run_again(ifmgd, ifmgd->auth_data->timeout);
if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
- mutex_lock(&sdata->local->mtx);
- ieee80211_recalc_idle(sdata->local);
- mutex_unlock(&sdata->local->mtx);
-
return RX_MGMT_CFG80211_DEAUTH;
}
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
- mutex_lock(&sdata->local->mtx);
- ieee80211_recalc_idle(sdata->local);
- mutex_unlock(&sdata->local->mtx);
-
return RX_MGMT_CFG80211_DISASSOC;
}
ifmgd->aid = aid;
+ /*
+ * We previously checked these in the beacon/probe response, so
+ * they should be present here. This is just a safety net.
+ */
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
+ (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
+ sdata_info(sdata,
+ "HT AP is missing WMM params or HT capability/operation in AssocResp\n");
+ return false;
+ }
+
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
+ (!elems.vht_cap_elem || !elems.vht_operation)) {
+ sdata_info(sdata,
+ "VHT AP is missing VHT capability/operation in AssocResp\n");
+ return false;
+ }
+
mutex_lock(&sdata->local->sta_mtx);
/*
* station info was already allocated and inserted before
sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
+ /* Set up internal HT/VHT capabilities */
if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
- elems.ht_cap_elem, &sta->sta.ht_cap);
-
- sta->supports_40mhz =
- sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ elems.ht_cap_elem, sta);
if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
- elems.vht_cap_elem,
- &sta->sta.vht_cap);
+ elems.vht_cap_elem, sta);
+
+ /*
+ * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
+ * in their association response, so ignore that data for our own
+ * configuration. If it changed since the last beacon, we'll get the
+ * next beacon and update then.
+ */
+
+ /*
+ * If an operating mode notification IE is present, override the
+ * NSS calculation (that would be done in rate_control_rate_init())
+ * and use the # of streams from that element.
+ */
+ if (elems.opmode_notif &&
+ !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
+ u8 nss;
+
+ nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
+ nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
+ nss += 1;
+ sta->sta.rx_nss = nss;
+ }
rate_control_rate_init(sta);
if (elems.wmm_param)
set_sta_flag(sta, WLAN_STA_WME);
- err = sta_info_move_state(sta, IEEE80211_STA_AUTH);
- if (!err)
- err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+ err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
if (err) {
ieee80211_set_wmm_default(sdata, false);
changed |= BSS_CHANGED_QOS;
- if (elems.ht_operation && elems.wmm_param &&
- !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
- changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation,
- cbss->bssid, false);
-
/* set AID and assoc capability,
* ieee80211_set_associated() will tell the driver */
bss_conf->aid = aid;
"%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
mgmt->sa, tu, ms);
assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
+ assoc_data->timeout_started = true;
if (ms > IEEE80211_ASSOC_TIMEOUT)
run_again(ifmgd, assoc_data->timeout);
return RX_MGMT_NONE;
if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) {
/* oops -- internal error -- send timeout for now */
ieee80211_destroy_assoc_data(sdata, false);
- cfg80211_put_bss(*bss);
+ cfg80211_put_bss(sdata->local->hw.wiphy, *bss);
return RX_MGMT_CFG80211_ASSOC_TIMEOUT;
}
sdata_info(sdata, "associated\n");
need_ps = sdata->u.mgd.associated && !sdata->u.mgd.dtim_period;
if (elems->tim && !elems->parse_error) {
- struct ieee80211_tim_ie *tim_ie = elems->tim;
+ const struct ieee80211_tim_ie *tim_ie = elems->tim;
sdata->u.mgd.dtim_period = tim_ie->dtim_period;
}
}
sdata_info(sdata, "direct probe responded\n");
ifmgd->auth_data->tries = 0;
ifmgd->auth_data->timeout = jiffies;
+ ifmgd->auth_data->timeout_started = true;
run_again(ifmgd, ifmgd->auth_data->timeout);
}
}
(1ULL << WLAN_EID_HT_CAPABILITY) |
(1ULL << WLAN_EID_HT_OPERATION);
-static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len,
- struct ieee80211_rx_status *rx_status)
+static enum rx_mgmt_action
+ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgmt *mgmt, size_t len,
+ u8 *deauth_buf, struct ieee80211_rx_status *rx_status)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
struct ieee80211_local *local = sdata->local;
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_channel *chan;
+ struct sta_info *sta;
u32 changed = 0;
bool erp_valid;
u8 erp_value = 0;
/* Process beacon from the current BSS */
baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
if (baselen > len)
- return;
+ return RX_MGMT_NONE;
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (!chanctx_conf) {
rcu_read_unlock();
- return;
+ return RX_MGMT_NONE;
}
if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
rcu_read_unlock();
- return;
+ return RX_MGMT_NONE;
}
chan = chanctx_conf->def.chan;
rcu_read_unlock();
- if (ifmgd->assoc_data && !ifmgd->assoc_data->have_beacon &&
+ if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
ieee802_11_parse_elems(mgmt->u.beacon.variable,
len - baselen, &elems);
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
ifmgd->assoc_data->have_beacon = true;
- ifmgd->assoc_data->sent_assoc = false;
+ ifmgd->assoc_data->need_beacon = false;
+ if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
+ sdata->vif.bss_conf.sync_tsf =
+ le64_to_cpu(mgmt->u.beacon.timestamp);
+ sdata->vif.bss_conf.sync_device_ts =
+ rx_status->device_timestamp;
+ if (elems.tim)
+ sdata->vif.bss_conf.sync_dtim_count =
+ elems.tim->dtim_count;
+ else
+ sdata->vif.bss_conf.sync_dtim_count = 0;
+ }
/* continue assoc process */
ifmgd->assoc_data->timeout = jiffies;
+ ifmgd->assoc_data->timeout_started = true;
run_again(ifmgd, ifmgd->assoc_data->timeout);
- return;
+ return RX_MGMT_NONE;
}
if (!ifmgd->associated ||
!ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
- return;
+ return RX_MGMT_NONE;
bssid = ifmgd->associated->bssid;
/* Track average RSSI from the Beacon frames of the current AP */
if (sig > ifmgd->rssi_max_thold &&
(last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
ifmgd->last_ave_beacon_signal = sig;
- drv_rssi_callback(local, RSSI_EVENT_HIGH);
+ drv_rssi_callback(local, sdata, RSSI_EVENT_HIGH);
} else if (sig < ifmgd->rssi_min_thold &&
(last_sig >= ifmgd->rssi_max_thold ||
last_sig == 0)) {
ifmgd->last_ave_beacon_signal = sig;
- drv_rssi_callback(local, RSSI_EVENT_LOW);
+ drv_rssi_callback(local, sdata, RSSI_EVENT_LOW);
}
}
if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
mlme_dbg_ratelimited(sdata,
- "cancelling probereq poll due to a received beacon\n");
+ "cancelling AP probe due to a received beacon\n");
mutex_lock(&local->mtx);
ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
ieee80211_run_deferred_scan(local);
}
if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
- return;
+ return RX_MGMT_NONE;
ifmgd->beacon_crc = ncrc;
ifmgd->beacon_crc_valid = true;
elems.wmm_param_len))
changed |= BSS_CHANGED_QOS;
+ /*
+ * If we haven't had a beacon before, tell the driver about the
+ * DTIM period (and beacon timing if desired) now.
+ */
+ if (!bss_conf->dtim_period) {
+ /* a few bogus AP send dtim_period = 0 or no TIM IE */
+ if (elems.tim)
+ bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
+ else
+ bss_conf->dtim_period = 1;
+
+ if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
+ sdata->vif.bss_conf.sync_tsf =
+ le64_to_cpu(mgmt->u.beacon.timestamp);
+ sdata->vif.bss_conf.sync_device_ts =
+ rx_status->device_timestamp;
+ if (elems.tim)
+ sdata->vif.bss_conf.sync_dtim_count =
+ elems.tim->dtim_count;
+ else
+ sdata->vif.bss_conf.sync_dtim_count = 0;
+ }
+
+ changed |= BSS_CHANGED_DTIM_PERIOD;
+ }
+
if (elems.erp_info && elems.erp_info_len >= 1) {
erp_valid = true;
erp_value = elems.erp_info[0];
le16_to_cpu(mgmt->u.beacon.capab_info),
erp_valid, erp_value);
+ mutex_lock(&local->sta_mtx);
+ sta = sta_info_get(sdata, bssid);
- if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param &&
- !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
- changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation,
- bssid, true);
+ if (ieee80211_config_bw(sdata, sta, elems.ht_operation,
+ elems.vht_operation, bssid, &changed)) {
+ mutex_unlock(&local->sta_mtx);
+ ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
+ WLAN_REASON_DEAUTH_LEAVING,
+ true, deauth_buf);
+ return RX_MGMT_CFG80211_TX_DEAUTH;
+ }
+
+ if (sta && elems.opmode_notif)
+ ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
+ rx_status->band, true);
+ mutex_unlock(&local->sta_mtx);
if (elems.country_elem && elems.pwr_constr_elem &&
mgmt->u.probe_resp.capab_info &
elems.pwr_constr_elem);
ieee80211_bss_info_change_notify(sdata, changed);
+
+ return RX_MGMT_NONE;
}
void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt;
struct cfg80211_bss *bss = NULL;
enum rx_mgmt_action rma = RX_MGMT_NONE;
+ u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
u16 fc;
rx_status = (struct ieee80211_rx_status *) skb->cb;
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_BEACON:
- ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
+ rma = ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len,
+ deauth_buf, rx_status);
break;
case IEEE80211_STYPE_PROBE_RESP:
ieee80211_rx_mgmt_probe_resp(sdata, skb);
case RX_MGMT_CFG80211_ASSOC_TIMEOUT:
cfg80211_send_assoc_timeout(sdata->dev, mgmt->bssid);
break;
+ case RX_MGMT_CFG80211_TX_DEAUTH:
+ cfg80211_send_deauth(sdata->dev, deauth_buf,
+ sizeof(deauth_buf));
+ break;
default:
WARN(1, "unexpected: %d", rma);
}
}
static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
- u8 *bssid, u8 reason)
+ u8 *bssid, u8 reason, bool tx)
{
- struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
- false, frame_buf);
+ tx, frame_buf);
mutex_unlock(&ifmgd->mtx);
/*
*/
cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN);
- mutex_lock(&local->mtx);
- ieee80211_recalc_idle(local);
- mutex_unlock(&local->mtx);
-
mutex_lock(&ifmgd->mtx);
}
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
+ u32 tx_flags = 0;
lockdep_assert_held(&ifmgd->mtx);
if (WARN_ON_ONCE(!auth_data))
return -EINVAL;
+ if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+ tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
+ IEEE80211_TX_INTFL_MLME_CONN_TX;
+
auth_data->tries++;
if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
auth_data->data, auth_data->data_len,
auth_data->bss->bssid,
- auth_data->bss->bssid, NULL, 0, 0);
+ auth_data->bss->bssid, NULL, 0, 0,
+ tx_flags);
} else {
const u8 *ssidie;
* will not answer to direct packet in unassociated state.
*/
ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1],
- NULL, 0, (u32) -1, true, false,
+ NULL, 0, (u32) -1, true, tx_flags,
auth_data->bss->channel, false);
rcu_read_unlock();
}
- auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
- run_again(ifmgd, auth_data->timeout);
+ if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
+ auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
+ ifmgd->auth_data->timeout_started = true;
+ run_again(ifmgd, auth_data->timeout);
+ } else {
+ auth_data->timeout_started = false;
+ }
return 0;
}
IEEE80211_ASSOC_MAX_TRIES);
ieee80211_send_assoc(sdata);
- assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
- run_again(&sdata->u.mgd, assoc_data->timeout);
+ if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
+ assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
+ assoc_data->timeout_started = true;
+ run_again(&sdata->u.mgd, assoc_data->timeout);
+ } else {
+ assoc_data->timeout_started = false;
+ }
return 0;
}
+void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
+ __le16 fc, bool acked)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ sdata->u.mgd.status_fc = fc;
+ sdata->u.mgd.status_acked = acked;
+ sdata->u.mgd.status_received = true;
+
+ ieee80211_queue_work(&local->hw, &sdata->work);
+}
+
void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
mutex_lock(&ifmgd->mtx);
- if (ifmgd->auth_data &&
+ if (ifmgd->status_received) {
+ __le16 fc = ifmgd->status_fc;
+ bool status_acked = ifmgd->status_acked;
+
+ ifmgd->status_received = false;
+ if (ifmgd->auth_data &&
+ (ieee80211_is_probe_req(fc) || ieee80211_is_auth(fc))) {
+ if (status_acked) {
+ ifmgd->auth_data->timeout =
+ jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
+ run_again(ifmgd, ifmgd->auth_data->timeout);
+ } else {
+ ifmgd->auth_data->timeout = jiffies - 1;
+ }
+ ifmgd->auth_data->timeout_started = true;
+ } else if (ifmgd->assoc_data &&
+ (ieee80211_is_assoc_req(fc) ||
+ ieee80211_is_reassoc_req(fc))) {
+ if (status_acked) {
+ ifmgd->assoc_data->timeout =
+ jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
+ run_again(ifmgd, ifmgd->assoc_data->timeout);
+ } else {
+ ifmgd->assoc_data->timeout = jiffies - 1;
+ }
+ ifmgd->assoc_data->timeout_started = true;
+ }
+ }
+
+ if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
time_after(jiffies, ifmgd->auth_data->timeout)) {
if (ifmgd->auth_data->done) {
/*
cfg80211_send_auth_timeout(sdata->dev, bssid);
mutex_lock(&ifmgd->mtx);
}
- } else if (ifmgd->auth_data)
+ } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
run_again(ifmgd, ifmgd->auth_data->timeout);
- if (ifmgd->assoc_data &&
+ if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
time_after(jiffies, ifmgd->assoc_data->timeout)) {
- if (!ifmgd->assoc_data->have_beacon ||
+ if ((ifmgd->assoc_data->need_beacon &&
+ !ifmgd->assoc_data->have_beacon) ||
ieee80211_do_assoc(sdata)) {
u8 bssid[ETH_ALEN];
cfg80211_send_assoc_timeout(sdata->dev, bssid);
mutex_lock(&ifmgd->mtx);
}
- } else if (ifmgd->assoc_data)
+ } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
run_again(ifmgd, ifmgd->assoc_data->timeout);
if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
"No ack for nullfunc frame to AP %pM, disconnecting.\n",
bssid);
ieee80211_sta_connection_lost(sdata, bssid,
- WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
+ WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+ false);
}
} else if (time_is_after_jiffies(ifmgd->probe_timeout))
run_again(ifmgd, ifmgd->probe_timeout);
"Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
bssid, probe_wait_ms);
ieee80211_sta_connection_lost(sdata, bssid,
- WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
+ WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
} else if (ifmgd->probe_send_count < max_tries) {
mlme_dbg(sdata,
"No probe response from AP %pM after %dms, try %d/%i\n",
bssid, probe_wait_ms);
ieee80211_sta_connection_lost(sdata, bssid,
- WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
+ WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
}
}
mutex_unlock(&ifmgd->mtx);
-
- mutex_lock(&local->mtx);
- ieee80211_recalc_idle(local);
- mutex_unlock(&local->mtx);
}
static void ieee80211_sta_bcn_mon_timer(unsigned long data)
if (local->quiescing)
return;
+ sdata->u.mgd.connection_loss = false;
ieee80211_queue_work(&sdata->local->hw,
&sdata->u.mgd.beacon_connection_loss_work);
}
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ /*
+ * Stop timers before deleting work items, as timers
+ * could race and re-add the work-items. They will be
+ * re-established on connection.
+ */
+ del_timer_sync(&ifmgd->conn_mon_timer);
+ del_timer_sync(&ifmgd->bcn_mon_timer);
+
/*
* we need to use atomic bitops for the running bits
* only because both timers might fire at the same
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
- cancel_work_sync(&ifmgd->chswitch_work);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
-
- /* these will just be re-established on connection */
- del_timer_sync(&ifmgd->conn_mon_timer);
- del_timer_sync(&ifmgd->bcn_mon_timer);
+ cancel_work_sync(&ifmgd->chswitch_work);
}
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- if (!ifmgd->associated)
+ mutex_lock(&ifmgd->mtx);
+ if (!ifmgd->associated) {
+ mutex_unlock(&ifmgd->mtx);
return;
+ }
if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
- mutex_lock(&ifmgd->mtx);
- if (ifmgd->associated) {
- mlme_dbg(sdata,
- "driver requested disconnect after resume\n");
- ieee80211_sta_connection_lost(sdata,
- ifmgd->associated->bssid,
- WLAN_REASON_UNSPECIFIED);
- mutex_unlock(&ifmgd->mtx);
- return;
- }
+ mlme_dbg(sdata, "driver requested disconnect after resume\n");
+ ieee80211_sta_connection_lost(sdata,
+ ifmgd->associated->bssid,
+ WLAN_REASON_UNSPECIFIED,
+ true);
mutex_unlock(&ifmgd->mtx);
+ return;
}
+ mutex_unlock(&ifmgd->mtx);
if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running))
add_timer(&ifmgd->timer);
return 0;
}
-static u32 chandef_downgrade(struct cfg80211_chan_def *c)
-{
- u32 ret;
- int tmp;
-
- switch (c->width) {
- case NL80211_CHAN_WIDTH_20:
- c->width = NL80211_CHAN_WIDTH_20_NOHT;
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_40:
- c->width = NL80211_CHAN_WIDTH_20;
- c->center_freq1 = c->chan->center_freq;
- ret = IEEE80211_STA_DISABLE_40MHZ |
- IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_80:
- tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
- /* n_P40 */
- tmp /= 2;
- /* freq_P40 */
- c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
- c->width = NL80211_CHAN_WIDTH_40;
- ret = IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_80P80:
- c->center_freq2 = 0;
- c->width = NL80211_CHAN_WIDTH_80;
- ret = IEEE80211_STA_DISABLE_80P80MHZ |
- IEEE80211_STA_DISABLE_160MHZ;
- break;
- case NL80211_CHAN_WIDTH_160:
- /* n_P20 */
- tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
- /* n_P80 */
- tmp /= 4;
- c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
- c->width = NL80211_CHAN_WIDTH_80;
- ret = IEEE80211_STA_DISABLE_80P80MHZ |
- IEEE80211_STA_DISABLE_160MHZ;
- break;
- default:
- case NL80211_CHAN_WIDTH_20_NOHT:
- WARN_ON_ONCE(1);
- c->width = NL80211_CHAN_WIDTH_20_NOHT;
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- break;
- }
-
- WARN_ON_ONCE(!cfg80211_chandef_valid(c));
-
- return ret;
-}
-
-static u32
-ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_supported_band *sband,
- struct ieee80211_channel *channel,
- const struct ieee80211_ht_operation *ht_oper,
- const struct ieee80211_vht_operation *vht_oper,
- struct cfg80211_chan_def *chandef)
-{
- struct cfg80211_chan_def vht_chandef;
- u32 ht_cfreq, ret;
-
- chandef->chan = channel;
- chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
- chandef->center_freq1 = channel->center_freq;
- chandef->center_freq2 = 0;
-
- if (!ht_oper || !sband->ht_cap.ht_supported) {
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- chandef->width = NL80211_CHAN_WIDTH_20;
-
- ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
- channel->band);
- /* check that channel matches the right operating channel */
- if (channel->center_freq != ht_cfreq) {
- /*
- * It's possible that some APs are confused here;
- * Netgear WNDR3700 sometimes reports 4 higher than
- * the actual channel in association responses, but
- * since we look at probe response/beacon data here
- * it should be OK.
- */
- sdata_info(sdata,
- "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- channel->center_freq, ht_cfreq,
- ht_oper->primary_chan, channel->band);
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- /* check 40 MHz support, if we have it */
- if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
- switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
- chandef->width = NL80211_CHAN_WIDTH_40;
- chandef->center_freq1 += 10;
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
- chandef->width = NL80211_CHAN_WIDTH_40;
- chandef->center_freq1 -= 10;
- break;
- }
- } else {
- /* 40 MHz (and 80 MHz) must be supported for VHT */
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- if (!vht_oper || !sband->vht_cap.vht_supported) {
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- vht_chandef.chan = channel;
- vht_chandef.center_freq1 =
- ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
- channel->band);
- vht_chandef.center_freq2 = 0;
-
- if (vht_oper->center_freq_seg2_idx)
- vht_chandef.center_freq2 =
- ieee80211_channel_to_frequency(
- vht_oper->center_freq_seg2_idx,
- channel->band);
-
- switch (vht_oper->chan_width) {
- case IEEE80211_VHT_CHANWIDTH_USE_HT:
- vht_chandef.width = chandef->width;
- break;
- case IEEE80211_VHT_CHANWIDTH_80MHZ:
- vht_chandef.width = NL80211_CHAN_WIDTH_80;
- break;
- case IEEE80211_VHT_CHANWIDTH_160MHZ:
- vht_chandef.width = NL80211_CHAN_WIDTH_160;
- break;
- case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
- vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
- break;
- default:
- sdata_info(sdata,
- "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
- vht_oper->chan_width);
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- if (!cfg80211_chandef_valid(&vht_chandef)) {
- sdata_info(sdata,
- "AP VHT information is invalid, disable VHT\n");
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
- ret = 0;
- goto out;
- }
-
- if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
- sdata_info(sdata,
- "AP VHT information doesn't match HT, disable VHT\n");
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- *chandef = vht_chandef;
-
- ret = 0;
-
- while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
- IEEE80211_CHAN_DISABLED)) {
- if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
- ret = IEEE80211_STA_DISABLE_HT |
- IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- ret = chandef_downgrade(chandef);
- }
-
- if (chandef->width != vht_chandef.width)
- sdata_info(sdata,
- "local regulatory prevented using AP HT/VHT configuration, downgraded\n");
-
-out:
- WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
- return ret;
-}
-
static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
struct cfg80211_bss *cbss)
{
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
sband->ht_cap.ht_supported) {
- const u8 *ht_oper_ie;
+ const u8 *ht_oper_ie, *ht_cap;
ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
ht_oper = (void *)(ht_oper_ie + 2);
+
+ ht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
+ if (!ht_cap || ht_cap[1] < sizeof(struct ieee80211_ht_cap)) {
+ ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
+ ht_oper = NULL;
+ }
}
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
sband->vht_cap.vht_supported) {
- const u8 *vht_oper_ie;
+ const u8 *vht_oper_ie, *vht_cap;
vht_oper_ie = ieee80211_bss_get_ie(cbss,
WLAN_EID_VHT_OPERATION);
vht_oper = NULL;
sdata_info(sdata,
"AP advertised VHT without HT, disabling both\n");
- sdata->flags |= IEEE80211_STA_DISABLE_HT;
- sdata->flags |= IEEE80211_STA_DISABLE_VHT;
+ ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+ }
+
+ vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
+ if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+ vht_oper = NULL;
}
}
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_oper, vht_oper,
- &chandef);
+ &chandef, true);
sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
local->rx_chains);
*/
ret = ieee80211_vif_use_channel(sdata, &chandef,
IEEE80211_CHANCTX_SHARED);
- while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT)
+ while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
ifmgd->flags |= chandef_downgrade(&chandef);
+ ret = ieee80211_vif_use_channel(sdata, &chandef,
+ IEEE80211_CHANCTX_SHARED);
+ }
return ret;
}
return -ENOMEM;
}
- mutex_lock(&local->mtx);
- ieee80211_recalc_idle(sdata->local);
- mutex_unlock(&local->mtx);
-
if (new_sta) {
u32 rates = 0, basic_rates = 0;
bool have_higher_than_11mbit;
int min_rate = INT_MAX, min_rate_index = -1;
struct ieee80211_supported_band *sband;
+ const struct cfg80211_bss_ies *ies;
sband = local->hw.wiphy->bands[cbss->channel->band];
/* set timing information */
sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
- sdata->vif.bss_conf.sync_tsf = cbss->tsf;
- sdata->vif.bss_conf.sync_device_ts = bss->device_ts;
+ rcu_read_lock();
+ ies = rcu_dereference(cbss->beacon_ies);
+ if (ies) {
+ const u8 *tim_ie;
+
+ sdata->vif.bss_conf.sync_tsf = ies->tsf;
+ sdata->vif.bss_conf.sync_device_ts =
+ bss->device_ts_beacon;
+ tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
+ ies->data, ies->len);
+ if (tim_ie && tim_ie[1] >= 2)
+ sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
+ else
+ sdata->vif.bss_conf.sync_dtim_count = 0;
+ } else if (!(local->hw.flags &
+ IEEE80211_HW_TIMING_BEACON_ONLY)) {
+ ies = rcu_dereference(cbss->proberesp_ies);
+ /* must be non-NULL since beacon IEs were NULL */
+ sdata->vif.bss_conf.sync_tsf = ies->tsf;
+ sdata->vif.bss_conf.sync_device_ts =
+ bss->device_ts_presp;
+ sdata->vif.bss_conf.sync_dtim_count = 0;
+ } else {
+ sdata->vif.bss_conf.sync_tsf = 0;
+ sdata->vif.bss_conf.sync_device_ts = 0;
+ sdata->vif.bss_conf.sync_dtim_count = 0;
+ }
+ rcu_read_unlock();
/* tell driver about BSSID, basic rates and timing */
ieee80211_bss_info_change_notify(sdata,
}
/* hold our own reference */
- cfg80211_ref_bss(auth_data->bss);
+ cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
err = 0;
goto out_unlock;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_bss *bss = (void *)req->bss->priv;
struct ieee80211_mgd_assoc_data *assoc_data;
+ const struct cfg80211_bss_ies *beacon_ies;
struct ieee80211_supported_band *sband;
- const u8 *ssidie, *ht_ie;
+ const u8 *ssidie, *ht_ie, *vht_ie;
int i, err;
assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
else
ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
+ vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
+ if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
+ memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
+ sizeof(struct ieee80211_vht_cap));
+ else
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
rcu_read_unlock();
if (bss->wmm_used && bss->uapsd_supported &&
if (err)
goto err_clear;
- if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) {
- const struct cfg80211_bss_ies *beacon_ies;
+ rcu_read_lock();
+ beacon_ies = rcu_dereference(req->bss->beacon_ies);
- rcu_read_lock();
- beacon_ies = rcu_dereference(req->bss->beacon_ies);
- if (!beacon_ies) {
- /*
- * Wait up to one beacon interval ...
- * should this be more if we miss one?
- */
- sdata_info(sdata, "waiting for beacon from %pM\n",
- ifmgd->bssid);
- assoc_data->timeout =
- TU_TO_EXP_TIME(req->bss->beacon_interval);
- } else {
- const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
- beacon_ies->data,
- beacon_ies->len);
- if (tim_ie && tim_ie[1] >=
- sizeof(struct ieee80211_tim_ie)) {
- const struct ieee80211_tim_ie *tim;
- tim = (void *)(tim_ie + 2);
- ifmgd->dtim_period = tim->dtim_period;
- }
- assoc_data->have_beacon = true;
- assoc_data->sent_assoc = false;
- assoc_data->timeout = jiffies;
+ if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC &&
+ !beacon_ies) {
+ /*
+ * Wait up to one beacon interval ...
+ * should this be more if we miss one?
+ */
+ sdata_info(sdata, "waiting for beacon from %pM\n",
+ ifmgd->bssid);
+ assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
+ assoc_data->timeout_started = true;
+ assoc_data->need_beacon = true;
+ } else if (beacon_ies) {
+ const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
+ beacon_ies->data,
+ beacon_ies->len);
+ u8 dtim_count = 0;
+
+ if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
+ const struct ieee80211_tim_ie *tim;
+ tim = (void *)(tim_ie + 2);
+ ifmgd->dtim_period = tim->dtim_period;
+ dtim_count = tim->dtim_count;
}
- rcu_read_unlock();
- } else {
assoc_data->have_beacon = true;
- assoc_data->sent_assoc = false;
assoc_data->timeout = jiffies;
+ assoc_data->timeout_started = true;
+
+ if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
+ sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
+ sdata->vif.bss_conf.sync_device_ts =
+ bss->device_ts_beacon;
+ sdata->vif.bss_conf.sync_dtim_count = dtim_count;
+ }
+ } else {
+ assoc_data->timeout = jiffies;
+ assoc_data->timeout_started = true;
}
+ rcu_read_unlock();
+
run_again(ifmgd, assoc_data->timeout);
if (bss->corrupt_data) {
mutex_unlock(&ifmgd->mtx);
out:
- mutex_lock(&sdata->local->mtx);
- ieee80211_recalc_idle(sdata->local);
- mutex_unlock(&sdata->local->mtx);
-
if (sent_frame)
__cfg80211_send_deauth(sdata->dev, frame_buf,
IEEE80211_DEAUTH_FRAME_LEN);
__cfg80211_send_disassoc(sdata->dev, frame_buf,
IEEE80211_DEAUTH_FRAME_LEN);
- mutex_lock(&sdata->local->mtx);
- ieee80211_recalc_idle(sdata->local);
- mutex_unlock(&sdata->local->mtx);
-
return 0;
}
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ /*
+ * Make sure some work items will not run after this,
+ * they will not do anything but might not have been
+ * cancelled when disconnecting.
+ */
+ cancel_work_sync(&ifmgd->monitor_work);
+ cancel_work_sync(&ifmgd->beacon_connection_loss_work);
+ cancel_work_sync(&ifmgd->request_smps_work);
+ cancel_work_sync(&ifmgd->csa_connection_drop_work);
+ cancel_work_sync(&ifmgd->chswitch_work);
+
mutex_lock(&ifmgd->mtx);
if (ifmgd->assoc_data)
ieee80211_destroy_assoc_data(sdata, false);
projects / cascardo / linux.git / blobdiff