<column name="type">
<p>
Specify a type for this logical port. Logical ports can be used to model
- other types of connectivity into an OVN logical switch. Leaving this column
- blank maintains the default logical port behavior.
+ other types of connectivity into an OVN logical switch. Leaving this
+ column blank maintains the default logical port behavior, which is
+ for a VM (or VIF) interface. The following other types are defined:
</p>
- <p>
- There are no other logical port types implemented yet.
- </p>
+ <dl>
+ <dt><code>localnet</code></dt>
+ <dd>A connection to a locally accessible network from each
+ <code>ovn-controller</code> instance. A logical switch can only
+ have a single <code>localnet</code> port attached and at most one
+ regular logical port. This is used to model direct connectivity
+ to an existing network.</dd>
+ </dl>
+
+ <dl>
+ <dt><code>vtep</code></dt>
+ <dd>A port to a logical switch on a VTEP gateway. In order
+ to get this port correctly recognized by the OVN controller, the
+ <ref column="options" table="Logical_Port"/>:<code>vtep-physical-switch</code>
+ and <ref column="options" table="Logical_Port"/>:<code>vtep-logical-switch</code>
+ must also be defined.</dd>
+ </dl>
</column>
<column name="options">
+ <p>
This column provides key/value settings specific to the logical port
- <ref column="type"/>.
+ <ref column="type"/>. The following options are defined:
+ </p>
+
+ <dl>
+ <dt><code>network_name</code></dt>
+ <dd>
+ Must be set when <ref column="type"/> is <code>localnet</code>.
+ <code>ovn-controller</code> uses local configuration to determine
+ exactly how to connect to this locally accessible network.
+ </dd>
+ </dl>
+
+ <dl>
+ <dt><code>vtep-physical-switch</code></dt>
+ <dd>
+ The name of the VTEP gateway. Must be set when
+ <ref column="type"/> is <code>vtep</code>.
+ </dd>
+ </dl>
+
+ <dl>
+ <dt><code>vtep-logical-switch</code></dt>
+ <dd>
+ A logical switch name connected by the VTEP gateway. Must be
+ set when <ref column="type"/> is <code>vtep</code>.
+ </dd>
+ </dl>
</column>
<column name="parent_name">
</column>
<column name="tag">
- When <ref column="name"/> identifies the interface of a container
- spawned inside a tenant VM, this column identifies the VLAN tag in
- the network traffic associated with that container's network interface.
- When there are multiple container interfaces inside a VM, all of
- them send their network traffic through a single VM network interface and
- this value helps OVN identify the correct container interface.
+ <p>
+ When <ref column="type"/> is empty and <ref column="name"/> identifies
+ the interface of a container spawned inside a tenant VM, this column
+ identifies the VLAN tag in the network traffic associated with that
+ container's network interface. When there are multiple container
+ interfaces inside a VM, all of them send their network traffic through a
+ single VM network interface and this value helps OVN identify the correct
+ container interface.
+ </p>
+
+ <p>
+ When <ref column="type"/> is set to <code>localnet</code>, this can be
+ set to indicate that the port represents a connection to a specific
+ VLAN on a locally accessible network. The VLAN ID is used to match
+ incoming traffic and is also added to outgoing traffic.
+ </p>
</column>
<column name="up">
</p>
<p>
- This specification will be extended to support L3 port security.
+ This specification will be extended to support L3 port security.
</p>
</column>
</p>
<column name="priority">
- The ACL rule's priority. Rules with numerically higher priority take
- precedence over those with lower. If two ACL rules with the same
- priority both match, then the one actually applied to a packet is
- undefined.
+ <p>
+ The ACL rule's priority. Rules with numerically higher priority
+ take precedence over those with lower. If two ACL rules with
+ the same priority both match, then the one actually applied to a
+ packet is undefined.
+ </p>
+
+ <p>
+ Return traffic from an <code>allow-related</code> flow is always
+ allowed and cannot be changed through an ACL.
+ </p>
+ </column>
+
+ <column name="direction">
+ <p>Direction of the traffic to which this rule should apply:</p>
+ <ul>
+ <li>
+ <code>from-lport</code>: Used to implement filters on traffic
+ arriving from a logical port. These rules are applied to the
+ logical switch's ingress pipeline.
+ </li>
+ <li>
+ <code>to-lport</code>: Used to implement filters on traffic
+ forwarded to a logical port. These rules are applied to the
+ logical switch's egress pipeline.
+ </li>
+ </ul>
</column>
<column name="match">
- The packets that the ACL should match, in the same expression language
- used for the <ref column="match" table="Logical_Flow"
- db="OVN_Southbound"/> column in the OVN Southbound database's <ref
- table="Logical_Flow" db="OVN_Southbound"/> table. Match
- <code>inport</code> and <code>outport</code> against names of logical
- ports within <ref column="lswitch"/> to implement ingress and egress
- ACLs, respectively. In logical switches connected to logical routers,
- the special port name <code>ROUTER</code> refers to the logical router
- port.
+ <p>
+ The packets that the ACL should match, in the same expression
+ language used for the <ref column="match" table="Logical_Flow"
+ db="OVN_Southbound"/> column in the OVN Southbound database's
+ <ref table="Logical_Flow" db="OVN_Southbound"/> table. The
+ <code>outport</code> logical port is only available in the
+ <code>to-lport</code> direction (the <code>inport</code> is
+ available in both directions).
+ </p>
+
+ <p>
+ By default all traffic is allowed. When writing a more
+ restrictive policy, it is important to remember to allow flows
+ such as ARP and IPv6 neighbor discovery packets.
+ </p>
+
+ <p>
+ In logical switches connected to logical routers, the special
+ port name <code>ROUTER</code> refers to the logical router port.
+ </p>
</column>
<column name="action">
<p>The action to take when the ACL rule matches:</p>
-
<ul>
<li>
<code>allow</code>: Forward the packet.
<li>
<code>reject</code>: Drop the packet, replying with a RST for TCP or
ICMP unreachable message for other IP-based protocols.
+ <code>Not implemented--currently treated as drop</code>
</li>
</ul>
-
- <p>
- Only <code>allow</code> and <code>drop</code> are implemented:
- <code>allow-related</code> is currently treated as <code>allow</code>,
- and <code>reject</code> as <code>drop</code>.
- </p>
</column>
<column name="log">
<p>
- If set to <code>true</code>, packets that match the ACL will trigger a
- log message on the transport node or nodes that perform ACL processing.
- Logging may be combined with any <ref column="action"/>.
+ If set to <code>true</code>, packets that match the ACL will trigger a
+ log message on the transport node or nodes that perform ACL processing.
+ Logging may be combined with any <ref column="action"/>.
</p>
<p>
- Logging is not yet implemented.
+ Logging is not yet implemented.
</p>
</column>
projects / cascardo / ovs.git / blobdiff