OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
-actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
LOCAL(br0): addr:aa:55:aa:55:00:00
config: PORT_DOWN
state: LINK_DOWN
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
-actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
1(p1): addr:aa:55:aa:55:00:0x
config: PORT_DOWN
state: LINK_DOWN
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
-AT_SETUP([ofproto - del group])
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - no group support (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
-group_id=1235,type=all,bucket=output:10
+group_id=1235,type=all,bucket=actions=output:10
+])
+AT_DATA([stderr], [dnl
+ovs-ofctl: none of the usable flow formats (OXM,OpenFlow11) is among the allowed flow formats (OpenFlow10,NXM)
+])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn add-groups br0 groups.txt], [1], ,[stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn mod-group br0 'group_id=1234,type=all,bucket=output:10'], [1], ,[stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn del-groups br0], [1], ,[stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn dump-groups br0 ], [1], ,[stderr])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - del group (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
-AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0 ], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
-OFPST_GROUP_DESC reply (OF1.5):
+OFPST_GROUP_DESC reply (OF1.1):
group_id=1234,type=all,bucket=actions=output:10
+ group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - add indirect group])
+OVS_VSWITCHD_START
+dnl indirect group must have exactly one bucket
+AT_DATA([stderr], [dnl
+OFPT_ERROR (OF1.1) (xid=0x2): OFPGMFC_INVALID_GROUP
+OFPT_GROUP_MOD (OF1.1) (xid=0x2): ***decode error: OFPGMFC_INVALID_GROUP***
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1234,type=indirect'], [1], , [stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1235,type=indirect,bucket=output:10'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1236,type=indirect,bucket=output:10,bucket=output:11'], [1], , [stderr])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - del group (OpenFlow 1.5)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=select,selection_method=hash,bucket=output:10,bucket=output:11
+group_id=1235,type=all,bucket=actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=select,selection_method=hash,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1235,type=all,bucket=bucket_id:2,actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1235,type=all,bucket=bucket_id:2,actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0], [0])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - del group deletes flows])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - insert buckets])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_DATA([buckets.txt], [dnl
+group_id=1234,command_bucket_id=11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 - < buckets.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - remove buckets])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=13])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_DATA([buckets.txt], [dnl
+group_id=1234
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 - < buckets.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=all])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=1], [1], [], [stderr])
+AT_CHECK([cat stderr | ofctl_strip], [0], [dnl
+OFPT_ERROR (OF1.5): OFPGMFC_UNKNOWN_BUCKET
+OFPT_GROUP_MOD (OF1.5):
+ REMOVE_BUCKET command_bucket_id:1,group_id=1234
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - flow mod checks group availability])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_GROUP_FEATURES reply (OF1.2):
Group table:
- Types: 0x0
+ Types: 0xf
Capabilities: 0x7
+ all group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ select group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ indirect group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ fast failover group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
])
OVS_VSWITCHD_STOP
AT_CLEANUP
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
-AT_SETUP([ofproto - group stats])
+AT_SETUP([ofproto - group stats (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group stats (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.3):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn dump-group-stats br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+ group_id=1235,duration=?s,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.3):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group stats (OpenFlow 1.5)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.5):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-group-stats br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+ group_id=1235,duration=?s,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.5):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - mod-port (OpenFlow 1.0)])
OVS_VSWITCHD_START
for command_config_state in \
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
-actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
LOCAL(br0): addr:aa:55:aa:55:00:00
config: $config
state: $state
AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
OFPT_FEATURES_REPLY (OF1.2): dpid:fedcba9876543210
n_tables:254, n_buffers:256
-capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS GROUP_STATS QUEUE_STATS
LOCAL(br0): addr:aa:55:aa:55:00:00
config: $config
state: $state
AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
OFPT_FEATURES_REPLY (OF1.4): dpid:fedcba9876543210
n_tables:254, n_buffers:256
-capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS GROUP_STATS QUEUE_STATS
OFPST_PORT_DESC reply (OF1.4):
LOCAL(br0): addr:aa:55:aa:55:00:00
config: $config
# but at least it's the same code in ofpacts_check() that issues the error.
AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:1],
[1], [],
- [ovs-ofctl: actions are invalid with specified match (OFPBRC_BAD_TABLE_ID)
+ [ovs-ofctl: actions are invalid with specified match (OFPBIC_BAD_TABLE_ID)
])
OVS_VSWITCHD_STOP
AT_CLEANUP
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=drop])
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
+AT_CHECK([ovs-ofctl add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ table=1, icmp6,in_port=3,icmp_type=136 actions=load:0xa6badbfff00d59fa->NXM_NX_ND_TARGET[[0..63]],load:0xfe8086753097890a->NXM_NX_ND_TARGET[[64..127]],load:0xccddeeff0011->NXM_NX_ND_TLL[[]]
table=1, ipv6,in_port=3 actions=load:0xa6badbfffefe59fa->NXM_NX_IPV6_SRC[[0..63]],load:0xfe8001234567890a->NXM_NX_IPV6_SRC[[64..127]]
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - set-field flow_mod commands (OF1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=drop])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ table=1, icmp6,in_port=3,icmp_type=136 actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa->nd_target,set_field:cc:dd:ee:ff:00:11->nd_tll
+ table=1, ipv6,in_port=3 actions=set_field:fe80:123:4567:890a:a6ba:dbff:fefe:59fa->ipv6_src
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - dump flows with cookie])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_SETUP([ofproto - flow table configuration (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Check the default configuration.
-(echo "OFPST_TABLE reply (xid=0x2): 254 tables
- 0: classifier: wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0"
- x=1
+(printf "OFPST_TABLE reply (xid=0x2):"
+ x=0
+ name=classifier
while test $x -lt 254; do
- printf " %d: %-8s: wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0
-" $x table$x
+ printf "
+ table %d (\"%s\"):
+ active=0, lookup=0, matched=0
+ max_entries=1000000
+ matching:
+ in_port: exact match or wildcard
+ eth_src: exact match or wildcard
+ eth_dst: exact match or wildcard
+ eth_type: exact match or wildcard
+ vlan_vid: exact match or wildcard
+ vlan_pcp: exact match or wildcard
+ ip_src: exact match or wildcard
+ ip_dst: exact match or wildcard
+ nw_proto: exact match or wildcard
+ nw_tos: exact match or wildcard
+ tcp_src: exact match or wildcard
+ tcp_dst: exact match or wildcard
+" $x $name
x=`expr $x + 1`
+ name=table$x
done) > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
# Change the configuration.
])
# Check that the configuration was updated.
mv expout orig-expout
-(echo "OFPST_TABLE reply (xid=0x2): 254 tables
- 0: main : wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0
- 1: table1 : wild=0x3fffff, max= 1024, active=0
- lookup=0, matched=0"
- tail -n +6 orig-expout) > expout
+sed -e 's/classifier/main/
+21s/1000000/1024/' orig-expout > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl In-band and fail-open add "hidden rules" to table 0. These rules shouldn't
+dnl be visible to OpenFlow. This test checks that "dump-flows" and
+dnl "dump-tables" don't make them visible.
+AT_SETUP([ofproto - hidden rules not in table stats])
+# Use an IP address for a controller that won't actually exist: we
+# want to create in-band rules but we do not want to actually connect
+# to a controller (because that could mess about with our test). The
+# Class E range 240.0.0.0 - 255.255.255.255 seems like a good choice.
+OVS_VSWITCHD_START([set-controller br0 tcp:240.0.0.1:6653])
+for i in 1 2 3 4 5; do ovs-appctl time/warp 1000; done
+
+# Check that no hidden flows are visible in OpenFlow.
+AT_CHECK([ovs-ofctl dump-flows br0], [0], [NXST_FLOW reply (xid=0x4):
+])
+
+# Check that some hidden flows related to 240.0.0.1 are actually in table 0.
+#
+# We discard flows that mention table_id because we only want table 0 flows,
+# which in OVS is implied by the absence of a table_id.
+AT_CHECK([ovs-appctl bridge/dump-flows br0], [0], [stdout])
+AT_CHECK([test `grep '240\.0\.0\.1' stdout | grep -v table_id= | wc -l` -gt 0])
+
+# Check that dump-tables doesn't count the hidden flows.
+(printf "OFPST_TABLE reply (xid=0x2):"
+ x=0
+ name=classifier
+ while test $x -lt 254; do
+ printf "
+ table %d (\"%s\"):
+ active=0, lookup=0, matched=0
+ max_entries=1000000
+ matching:
+ in_port: exact match or wildcard
+ eth_src: exact match or wildcard
+ eth_dst: exact match or wildcard
+ eth_type: exact match or wildcard
+ vlan_vid: exact match or wildcard
+ vlan_pcp: exact match or wildcard
+ ip_src: exact match or wildcard
+ ip_dst: exact match or wildcard
+ nw_proto: exact match or wildcard
+ nw_tos: exact match or wildcard
+ tcp_src: exact match or wildcard
+ tcp_dst: exact match or wildcard
+" $x $name
+ x=`expr $x + 1`
+ name=table$x
+ done) > expout
+AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
+OVS_VSWITCHD_STOP(["/cannot find route for controller/d"])
+AT_CLEANUP
+
AT_SETUP([ofproto - flow table configuration (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Check the default configuration.
-(mid="wild=0xfffffffff, max=1000000,"
- tail="
- lookup=0, matched=0
- match=0xfffffffff, instructions=0x00000007, config=0x00000003
- write_actions=0x00000000, apply_actions=0x00000000
- write_setfields=0x0000000fffffffff
- apply_setfields=0x0000000fffffffff
- metadata_match=0xffffffffffffffff
- metadata_write=0xffffffffffffffff"
- echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
- 0: classifier: $mid active=0$tail"
- x=1
+(printf "OFPST_TABLE reply (OF1.2) (xid=0x2):"
+ x=0
+ name=classifier
while test $x -lt 254; do
- printf " %d: %-8s: $mid active=0$tail
-" $x table$x
+ if test $x = 253; then
+ goto=
+ else
+ goto=,goto_table
+ fi
+ echo "
+ table $x (\"$name\"):
+ active=0, lookup=0, matched=0
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ config=controller
+ max_entries=1000000
+ instructions (table miss and others):
+ instructions: apply_actions,clear_actions,write_actions,write_metadata$goto
+ Write-Actions and Apply-Actions features:
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ supported on Set-Field: metadata in_port_oxm eth_src eth_dst vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ipv6_label ip_dscp nw_ecn arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst nd_target nd_sll nd_tll
+ matching:
+ metadata: exact match or wildcard
+ in_port_oxm: exact match or wildcard
+ eth_src: exact match or wildcard
+ eth_dst: exact match or wildcard
+ eth_type: exact match or wildcard
+ vlan_vid: exact match or wildcard
+ vlan_pcp: exact match or wildcard
+ mpls_label: exact match or wildcard
+ mpls_tc: exact match or wildcard
+ ip_src: exact match or wildcard
+ ip_dst: exact match or wildcard
+ ipv6_src: exact match or wildcard
+ ipv6_dst: exact match or wildcard
+ ipv6_label: exact match or wildcard
+ nw_proto: exact match or wildcard
+ ip_dscp: exact match or wildcard
+ nw_ecn: exact match or wildcard
+ arp_op: exact match or wildcard
+ arp_spa: exact match or wildcard
+ arp_tpa: exact match or wildcard
+ arp_sha: exact match or wildcard
+ arp_tha: exact match or wildcard
+ tcp_src: exact match or wildcard
+ tcp_dst: exact match or wildcard
+ udp_src: exact match or wildcard
+ udp_dst: exact match or wildcard
+ sctp_src: exact match or wildcard
+ sctp_dst: exact match or wildcard
+ icmp_type: exact match or wildcard
+ icmp_code: exact match or wildcard
+ icmpv6_type: exact match or wildcard
+ icmpv6_code: exact match or wildcard
+ nd_target: exact match or wildcard
+ nd_sll: exact match or wildcard
+ nd_tll: exact match or wildcard"
x=`expr $x + 1`
+ name=table$x
done) > expout
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
# Change the configuration.
])
# Check that the configuration was updated.
mv expout orig-expout
-(echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
- 0: main : wild=0xfffffffff, max=1000000, active=0"
- tail -n +3 orig-expout | head -7
- echo " 1: table1 : wild=0xfffffffff, max= 1024, active=0"
- tail -n +11 orig-expout) > expout
+sed 's/classifier/main/
+53s/1000000/1024/' < orig-expout > expout
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - table features (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+(x=0
+ name=classifier
+ while test $x -lt 254; do
+ y=`expr $x + 1`
+ if test $x = 253; then
+ next=
+ goto=
+ else
+ goto=,goto_table
+ if test $x = 252; then
+ next='
+ next tables: 253'
+ else
+ next="
+ next tables: $y-253"
+ fi
+ fi
+ echo " table $x (\"$name\"):
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ max_entries=1000000
+ instructions (table miss and others):$next
+ instructions: meter,apply_actions,clear_actions,write_actions,write_metadata$goto
+ Write-Actions and Apply-Actions features:
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ supported on Set-Field: tun_id tun_src tun_dst tun_gbp_id tun_gbp_flags metadata in_port in_port_oxm pkt_mark reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 xreg0 xreg1 xreg2 xreg3 eth_src eth_dst vlan_tci vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ipv6_label nw_tos ip_dscp nw_ecn nw_ttl arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst nd_target nd_sll nd_tll
+ matching:
+ dp_hash: arbitrary mask
+ recirc_id: exact match or wildcard
+ conj_id: exact match or wildcard
+ tun_id: arbitrary mask
+ tun_src: arbitrary mask
+ tun_dst: arbitrary mask
+ tun_gbp_id: arbitrary mask
+ tun_gbp_flags: arbitrary mask
+ metadata: arbitrary mask
+ in_port: exact match or wildcard
+ in_port_oxm: exact match or wildcard
+ actset_output: exact match or wildcard
+ pkt_mark: arbitrary mask
+ reg0: arbitrary mask
+ reg1: arbitrary mask
+ reg2: arbitrary mask
+ reg3: arbitrary mask
+ reg4: arbitrary mask
+ reg5: arbitrary mask
+ reg6: arbitrary mask
+ reg7: arbitrary mask
+ xreg0: arbitrary mask
+ xreg1: arbitrary mask
+ xreg2: arbitrary mask
+ xreg3: arbitrary mask
+ eth_src: arbitrary mask
+ eth_dst: arbitrary mask
+ eth_type: exact match or wildcard
+ vlan_tci: arbitrary mask
+ vlan_vid: arbitrary mask
+ vlan_pcp: exact match or wildcard
+ mpls_label: exact match or wildcard
+ mpls_tc: exact match or wildcard
+ mpls_bos: exact match or wildcard
+ ip_src: arbitrary mask
+ ip_dst: arbitrary mask
+ ipv6_src: arbitrary mask
+ ipv6_dst: arbitrary mask
+ ipv6_label: arbitrary mask
+ nw_proto: exact match or wildcard
+ nw_tos: exact match or wildcard
+ ip_dscp: exact match or wildcard
+ nw_ecn: exact match or wildcard
+ nw_ttl: exact match or wildcard
+ ip_frag: arbitrary mask
+ arp_op: exact match or wildcard
+ arp_spa: arbitrary mask
+ arp_tpa: arbitrary mask
+ arp_sha: arbitrary mask
+ arp_tha: arbitrary mask
+ tcp_src: arbitrary mask
+ tcp_dst: arbitrary mask
+ tcp_flags: arbitrary mask
+ udp_src: arbitrary mask
+ udp_dst: arbitrary mask
+ sctp_src: arbitrary mask
+ sctp_dst: arbitrary mask
+ icmp_type: exact match or wildcard
+ icmp_code: exact match or wildcard
+ icmpv6_type: exact match or wildcard
+ icmpv6_code: exact match or wildcard
+ nd_target: arbitrary mask
+ nd_sll: arbitrary mask
+ nd_tll: arbitrary mask"
+ x=$y
+ name=table$x
+ done) > expout
+AT_CHECK([ovs-ofctl -O OpenFlow13 dump-table-features br0 | sed '/^$/d
+/^OFPST_TABLE_FEATURES/d'], [0], [expout])
+# Change the configuration.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=main \
+ -- --id=@t1 create Flow_Table flow-limit=1024 \
+ -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+<1>
+])
+# Check that the configuration was updated.
+mv expout orig-expout
+sed 's/classifier/main/
+77s/1000000/1024/' < orig-expout > expout
+AT_CHECK([ovs-ofctl -O OpenFlow13 dump-table-features br0 | sed '/^$/d
+/^OFPST_TABLE_FEATURES/d'], [0], [expout])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
in_port=5 actions=drop
OFPST_FLOW reply (OF1.2):
])
-# In Open Flow 1.2 a mod-flow does not ever add a flow and thus
+# In OpenFlow 1.2 a mod-flow does not ever add a flow and thus
# has no effect on eviction
AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=6,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=4,actions=normal])
ovs-ofctl -v packet-out br0 controller controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
ovs-ofctl -v packet-out br0 controller 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
if test X"$1" = X"OFPR_NO_MATCH"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via no_match) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
- ovs-ofctl packet-out br0 controller dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ ovs-ofctl packet-out br0 controller dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=76 in_port=CONTROLLER (via invalid_ttl) data_len=76 (unbuffered)
-udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+udp,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
ovs-ofctl -O OpenFlow12 -v packet-out br0 none controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
ovs-ofctl -O OpenFlow12 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
if test X"$1" = X"OFPR_NO_MATCH"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
- ovs-ofctl -O OpenFlow12 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ ovs-ofctl -O OpenFlow12 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
-udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+udp,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
ovs-ofctl -O OpenFlow13 -v packet-out br0 none controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
ovs-ofctl -O OpenFlow13 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
if test X"$1" = X"OFPR_NO_MATCH"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
- ovs-ofctl -O OpenFlow13 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ ovs-ofctl -O OpenFlow13 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
-udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+udp,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.5)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow15 monitor br0 --detach --no-chdir --pidfile])
+check_async () {
+ printf '\n\n--- check_async %d ---\n\n\n' $1
+ INDEX=$1
+ shift
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ : > expout
+
+ # Other tests are not working with OF 1.5, and message
+ # format may change, so leave them out.
+
+ # OFPT_PORT_STATUS, OFPPR_ADD
+ ovs-vsctl add-port br0 test -- set Interface test type=dummy
+ if test X"$1" = X"OFPPR_ADD"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.5): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_MODIFY
+ ovs-ofctl -O OpenFlow15 -vwarn mod-port br0 test up
+ if test X"$1" = X"OFPPR_MODIFY"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.5): MOD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+OFPT_PORT_STATUS (OF1.5): MOD: 2(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: 0
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_DELETE
+ ovs-vsctl del-port br0 test
+ if test X"$1" = X"OFPPR_DELETE"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.5): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: 0
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ AT_FAIL_IF([test X"$1" != X])
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ echo >>expout "OFPT_BARRIER_REPLY (OF1.5):"
+
+ AT_CHECK(
+ [[sed '
+s/ (xid=0x[0-9a-fA-F]*)//
+s/ *duration.*//
+s/00:0.$/00:0x/' < monitor.log]],
+ [0], [expout])
+}
+
+# It's a service connection so initially there should be no async messages.
+check_async 1
+
+# If we don't set this, async messages are not received.
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
+ovs-appctl -t ovs-ofctl ofctl/send 0609000c0123456700000080
+check_async 2 OFPPR_ADD OFPPR_MODIFY OFPPR_DELETE
+
+# Set-async has changed in OF 1.4 and is not yet implemented.
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This test checks that the role request/response messaging works
dnl and that generation_id is handled properly.
AT_SETUP([ofproto - controller role (OpenFlow 1.2)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
-
-ovs-appctl -t ovs-ofctl ofctl/barrier
-ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
-: > expout
-: > experr
+ON_EXIT([kill `cat c1.pid c2.pid`])
+
+# Start two ovs-ofctl controller processes.
+AT_CAPTURE_FILE([monitor1.log])
+AT_CAPTURE_FILE([expout1])
+AT_CAPTURE_FILE([experr1])
+AT_CAPTURE_FILE([monitor2.log])
+AT_CAPTURE_FILE([expout2])
+AT_CAPTURE_FILE([experr2])
+for i in 1 2; do
+ AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile=`pwd`/c$i.pid --unixctl=`pwd`/c$i])
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
+ : > expout$i
+ : > experr$i
+
+ # find out current role
+ ovs-appctl -t `pwd`/c$i ofctl/send 031800180000000200000000000000000000000000000000
+ echo >>experr$i "send: OFPT_ROLE_REQUEST (OF1.2): role=nochange"
+ echo >>expout$i "OFPT_ROLE_REPLY (OF1.2): role=equal"
+done
-# find out current role
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000200000000000000000000000000000000
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x2): role=nochange"
-echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x2): role=equal"
+# controller 1: Become slave (generation_id is initially undefined, so
+# 2^63+2 should not be stale)
+ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000300000003000000008000000000000002
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=slave generation_id=9223372036854775810"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.2): role=slave generation_id=9223372036854775810"
+
+# controller 2: Become master.
+ovs-appctl -t `pwd`/c2 ofctl/send 031800180000000300000002000000008000000000000003
+echo >>experr2 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=9223372036854775811"
+echo >>expout2 "OFPT_ROLE_REPLY (OF1.2): role=master generation_id=9223372036854775811"
+
+# controller 1: Try to become the master using a stale generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000400000002000000000000000000000003
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=3"
+echo >>expout1 "OFPT_ERROR (OF1.2): OFPRRFC_STALE"
+echo >>expout1 "OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=3"
+
+# controller 1: Become master using a valid generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000500000002000000000000000000000001
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=1"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.2): role=master generation_id=1"
+
+for i in 1 2; do
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ echo >>expout$i "OFPT_BARRIER_REPLY (OF1.2):"
+done
-# Become slave (generation_id is initially undefined, so 2^63+2 should not be stale)
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000300000003000000008000000000000002
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
-echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
+# Check output.
+for i in 1 2; do
+ cp expout$i expout
+ AT_CHECK([grep -v '^send:' monitor$i.log | STRIP_XIDS], [0], [expout])
+ cp experr$i expout
+ AT_CHECK([grep '^send:' monitor$i.log | STRIP_XIDS], [0], [expout])
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
-# Try to become the master using a stale generation ID
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000400000002000000000000000000000002
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
-echo >>expout "OFPT_ERROR (OF1.2) (xid=0x4): OFPRRFC_STALE"
-echo >>expout "OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
-
-# Become master using a valid generation ID
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000500000002000000000000000000000001
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x5): role=master generation_id=1"
-echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x5): role=master generation_id=1"
-ovs-appctl -t ovs-ofctl ofctl/barrier
-echo >>expout "OFPT_BARRIER_REPLY (OF1.2) (xid=0x3):"
+dnl This test checks that the role request/response messaging works,
+dnl that generation_id is handled properly, and that role status update
+dnl messages are sent when a controller's role gets changed from master
+dnl to slave.
+AT_SETUP([ofproto - controller role (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+ON_EXIT([kill `cat c1.pid c2.pid`])
+
+# Start two ovs-ofctl controller processes.
+AT_CAPTURE_FILE([monitor1.log])
+AT_CAPTURE_FILE([expout1])
+AT_CAPTURE_FILE([experr1])
+AT_CAPTURE_FILE([monitor2.log])
+AT_CAPTURE_FILE([expout2])
+AT_CAPTURE_FILE([experr2])
+for i in 1 2; do
+ AT_CHECK([ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile=`pwd`/c$i.pid --unixctl=`pwd`/c$i])
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
+ : > expout$i
+ : > experr$i
+
+ # find out current role
+ ovs-appctl -t `pwd`/c$i ofctl/send 051800180000000200000000000000000000000000000000
+ echo >>experr$i "send: OFPT_ROLE_REQUEST (OF1.4): role=nochange"
+ echo >>expout$i "OFPT_ROLE_REPLY (OF1.4): role=equal"
+done
-AT_CHECK([grep -v '^send:' monitor.log], [0], [expout])
-mv experr expout
-AT_CHECK([grep '^send:' monitor.log], [0], [expout])
+# controller 1: Become slave (generation_id is initially undefined, so
+# 2^63+2 should not be stale)
+ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000300000003000000008000000000000002
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=slave generation_id=9223372036854775810"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.4): role=slave generation_id=9223372036854775810"
+
+# controller 2: Become master.
+ovs-appctl -t `pwd`/c2 ofctl/send 051800180000000300000002000000008000000000000003
+echo >>experr2 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=9223372036854775811"
+echo >>expout2 "OFPT_ROLE_REPLY (OF1.4): role=master generation_id=9223372036854775811"
+
+# controller 1: Try to become the master using a stale generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000400000002000000000000000000000003
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=3"
+echo >>expout1 "OFPT_ERROR (OF1.4): OFPRRFC_STALE"
+echo >>expout1 "OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=3"
+
+# controller 1: Become master using a valid generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000500000002000000000000000000000001
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=1"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.4): role=master generation_id=1"
+echo >>expout2 "OFPT_ROLE_STATUS (OF1.4): role=slave generation_id=1 reason=master_request"
+
+for i in 1 2; do
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ echo >>expout$i "OFPT_BARRIER_REPLY (OF1.4):"
+done
-ovs-appctl -t ovs-ofctl exit
+# Check output.
+for i in 1 2; do
+ cp expout$i expout
+ AT_CHECK([grep -v '^send:' monitor$i.log | STRIP_XIDS], [0], [expout])
+ cp experr$i expout
+ AT_CHECK([grep '^send:' monitor$i.log | STRIP_XIDS], [0], [expout])
+done
OVS_VSWITCHD_STOP
AT_CLEANUP
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN: total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY:
])
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY (OF1.2):
])
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.1): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN (OF1.1): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY (OF1.1):
])
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
NXT_PACKET_IN: total_len=14 in_port=CONTROLLER metadata=0xfafafafa5a5a5a5a pkt_mark=0xaa (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY:
])
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY metadata=0xfafafafa5a5a5a5a (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This test checks that metadata is encoded in packet_in structures,
+dnl supported by NXAST.
+AT_SETUP([ofproto - packet-out with metadata and dual set_field (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0409000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with a couple of set-field action to set some metadata, and forward to controller
+AT_CHECK([ovs-ofctl -O OpenFlow13 packet-out br0 none 'set_field:0xfafafafa5a5a5a5a->metadata, set_field:0x6b->metadata, controller' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY metadata=0x6b (via action) data_len=14 (unbuffered)
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_BARRIER_REPLY (OF1.3):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This test checks that tunnel metadata is encoded in packet_in structures.
AT_SETUP([ofproto - packet-out with tunnel metadata (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY tun_id=0x1020304 tun_src=127.0.0.1 tun_dst=192.168.0.1 (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY (OF1.2):
])
projects / cascardo / ovs.git / blobdiff