AT_SETUP([ofproto - del group (OpenFlow 1.5)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
-group_id=1234,type=all,bucket=output:10,bucket=output:11
+group_id=1234,type=select,selection_method=hash,bucket=output:10,bucket=output:11
group_id=1235,type=all,bucket=actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
- group_id=1234,type=all,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+ group_id=1234,type=select,selection_method=hash,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - insert buckets])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_DATA([buckets.txt], [dnl
+group_id=1234,command_bucket_id=11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 - < buckets.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - remove buckets])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=13])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_DATA([buckets.txt], [dnl
+group_id=1234
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 - < buckets.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=all])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=1], [1], [], [stderr])
+AT_CHECK([cat stderr | ofctl_strip], [0], [dnl
+OFPT_ERROR (OF1.5): OFPGMFC_UNKNOWN_BUCKET
+OFPT_GROUP_MOD (OF1.5):
+ REMOVE_BUCKET command_bucket_id:1,group_id=1234
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - flow mod checks group availability])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=drop])
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
+AT_CHECK([ovs-ofctl add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ table=1, icmp6,in_port=3,icmp_type=136 actions=load:0xa6badbfff00d59fa->NXM_NX_ND_TARGET[[0..63]],load:0xfe8086753097890a->NXM_NX_ND_TARGET[[64..127]],load:0xccddeeff0011->NXM_NX_ND_TLL[[]]
table=1, ipv6,in_port=3 actions=load:0xa6badbfffefe59fa->NXM_NX_IPV6_SRC[[0..63]],load:0xfe8001234567890a->NXM_NX_IPV6_SRC[[64..127]]
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - set-field flow_mod commands (OF1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=drop])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ table=1, icmp6,in_port=3,icmp_type=136 actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa->nd_target,set_field:cc:dd:ee:ff:00:11->nd_tll
+ table=1, ipv6,in_port=3 actions=set_field:fe80:123:4567:890a:a6ba:dbff:fefe:59fa->ipv6_src
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - dump flows with cookie])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl In-band and fail-open add "hidden rules" to table 0. These rules shouldn't
+dnl be visible to OpenFlow. This test checks that "dump-flows" and
+dnl "dump-tables" don't make them visible.
+AT_SETUP([ofproto - hidden rules not in table stats])
+# Use an IP address for a controller that won't actually exist: we
+# want to create in-band rules but we do not want to actually connect
+# to a controller (because that could mess about with our test). The
+# Class E range 240.0.0.0 - 255.255.255.255 seems like a good choice.
+OVS_VSWITCHD_START([set-controller br0 tcp:240.0.0.1:6653])
+for i in 1 2 3 4 5; do ovs-appctl time/warp 1000; done
+
+# Check that no hidden flows are visible in OpenFlow.
+AT_CHECK([ovs-ofctl dump-flows br0], [0], [NXST_FLOW reply (xid=0x4):
+])
+
+# Check that some hidden flows related to 240.0.0.1 are actually in table 0.
+#
+# We discard flows that mention table_id because we only want table 0 flows,
+# which in OVS is implied by the absence of a table_id.
+AT_CHECK([ovs-appctl bridge/dump-flows br0], [0], [stdout])
+AT_CHECK([test `grep '240\.0\.0\.1' stdout | grep -v table_id= | wc -l` -gt 0])
+
+# Check that dump-tables doesn't count the hidden flows.
+(printf "OFPST_TABLE reply (xid=0x2):"
+ x=0
+ name=classifier
+ while test $x -lt 254; do
+ printf "
+ table %d (\"%s\"):
+ active=0, lookup=0, matched=0
+ max_entries=1000000
+ matching:
+ in_port: exact match or wildcard
+ eth_src: exact match or wildcard
+ eth_dst: exact match or wildcard
+ eth_type: exact match or wildcard
+ vlan_vid: exact match or wildcard
+ vlan_pcp: exact match or wildcard
+ ip_src: exact match or wildcard
+ ip_dst: exact match or wildcard
+ nw_proto: exact match or wildcard
+ nw_tos: exact match or wildcard
+ tcp_src: exact match or wildcard
+ tcp_dst: exact match or wildcard
+" $x $name
+ x=`expr $x + 1`
+ name=table$x
+ done) > expout
+AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
+OVS_VSWITCHD_STOP(["/cannot find route for controller/d"])
+AT_CLEANUP
+
AT_SETUP([ofproto - flow table configuration (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Check the default configuration.
x=0
name=classifier
while test $x -lt 254; do
+ if test $x = 253; then
+ goto=
+ else
+ goto=,goto_table
+ fi
echo "
table $x (\"$name\"):
active=0, lookup=0, matched=0
config=controller
max_entries=1000000
instructions (table miss and others):
- instructions: apply_actions,clear_actions,write_actions,write_metadata,goto_table
+ instructions: apply_actions,clear_actions,write_actions,write_metadata$goto
Write-Actions and Apply-Actions features:
actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
- supported on Set-Field: metadata in_port_oxm eth_src eth_dst vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ip_dscp nw_ecn arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst
+ supported on Set-Field: metadata in_port_oxm eth_src eth_dst vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ipv6_label ip_dscp nw_ecn arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst nd_target nd_sll nd_tll
matching:
metadata: exact match or wildcard
in_port_oxm: exact match or wildcard
while test $x -lt 254; do
y=`expr $x + 1`
if test $x = 253; then
- next=254
+ next=
+ goto=
else
- next=$y-254
+ goto=,goto_table
+ if test $x = 252; then
+ next='
+ next tables: 253'
+ else
+ next="
+ next tables: $y-253"
+ fi
fi
echo " table $x (\"$name\"):
metadata: match=0xffffffffffffffff write=0xffffffffffffffff
max_entries=1000000
- instructions (table miss and others):
- next tables: $next
- instructions: meter,apply_actions,clear_actions,write_actions,write_metadata,goto_table
+ instructions (table miss and others):$next
+ instructions: meter,apply_actions,clear_actions,write_actions,write_metadata$goto
Write-Actions and Apply-Actions features:
actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
- supported on Set-Field: tun_id tun_src tun_dst metadata in_port in_port_oxm pkt_mark reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 xreg0 xreg1 xreg2 xreg3 eth_src eth_dst vlan_tci vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst nw_tos ip_dscp nw_ecn nw_ttl arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst
+ supported on Set-Field: tun_id tun_src tun_dst tun_gbp_id tun_gbp_flags metadata in_port in_port_oxm pkt_mark reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 xreg0 xreg1 xreg2 xreg3 eth_src eth_dst vlan_tci vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ipv6_label nw_tos ip_dscp nw_ecn nw_ttl arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst nd_target nd_sll nd_tll
matching:
dp_hash: arbitrary mask
recirc_id: exact match or wildcard
+ conj_id: exact match or wildcard
tun_id: arbitrary mask
tun_src: arbitrary mask
tun_dst: arbitrary mask
+ tun_gbp_id: arbitrary mask
+ tun_gbp_flags: arbitrary mask
metadata: arbitrary mask
in_port: exact match or wildcard
in_port_oxm: exact match or wildcard
# Check that the configuration was updated.
mv expout orig-expout
sed 's/classifier/main/
-74s/1000000/1024/' < orig-expout > expout
+77s/1000000/1024/' < orig-expout > expout
AT_CHECK([ovs-ofctl -O OpenFlow13 dump-table-features br0 | sed '/^$/d
/^OFPST_TABLE_FEATURES/d'], [0], [expout])
OVS_VSWITCHD_STOP
in_port=5 actions=drop
OFPST_FLOW reply (OF1.2):
])
-# In Open Flow 1.2 a mod-flow does not ever add a flow and thus
+# In OpenFlow 1.2 a mod-flow does not ever add a flow and thus
# has no effect on eviction
AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=6,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=4,actions=normal])