capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
LOCAL(br0): addr:aa:55:aa:55:00:00
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
LOCAL(br0): addr:aa:55:aa:55:00:0x
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - port stats - (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn dump-ports br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sed 's/duration=[[0-9.]]*s/duration=?s/'],
+ [0], [dnl
+OFPST_PORT reply (OF1.4): 1 ports
+ port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=0, bytes=0, drop=0, errs=0, coll=0
+ duration=?s
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - port-desc stats (OpenFlow 1.0)])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_PORT_DESC reply:
LOCAL(br0): addr:aa:55:aa:55:00:00
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_PORT_DESC reply (OF1.2):
LOCAL(br0): addr:aa:55:aa:55:00:00
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - port-desc stats (OpenFlow 1.5)])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], 1, 2, 3)
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-ports-desc br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sed 's/00:0./00:0x/'], [0], [dnl
+OFPST_PORT_DESC reply (OF1.5):
+ 1(p1): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ 2(p2): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ 3(p3): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ LOCAL(br0): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-ports-desc br0 2], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sed 's/00:0./00:0x/'], [0], [dnl
+OFPST_PORT_DESC reply (OF1.5):
+ 2(p2): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - queue stats - (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn queue-stats br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_QUEUE reply (OF1.4): 0 queues
+])
+AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn queue-stats br0 ALL 5], [0],
+ [OFPT_ERROR (OF1.4) (xid=0x2): OFPQOFC_BAD_QUEUE
+OFPST_QUEUE request (OF1.4) (xid=0x2):port=ANY queue=5
+])
+AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn queue-stats br0 10], [0],
+ [OFPT_ERROR (OF1.4) (xid=0x2): OFPQOFC_BAD_PORT
+OFPST_QUEUE request (OF1.4) (xid=0x2):port=10 queue=ALL
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - queue configuration - (OpenFlow 1.0)])
group_id=1235,type=all,bucket=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=actions=output:10
+])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - mod-port (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+for command_config_state in \
+ 'up 0 0' \
+ 'down PORT_DOWN LINK_DOWN' \
+ 'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
+ 'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
+ 'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
+ 'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'up NO_RECV 0' \
+ 'receive 0 0'
+do
+ set $command_config_state
+ command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
+ AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn mod-port br0 br0 $command])
+ AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn show br0], [0], [stdout])
+ AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
+OFPT_FEATURES_REPLY (OF1.4): dpid:fedcba9876543210
+n_tables:254, n_buffers:256
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS
+OFPST_PORT_DESC reply (OF1.4):
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: $config
+ state: $state
+ speed: 0 Mbps now, 0 Mbps max
+OFPT_GET_CONFIG_REPLY (OF1.4): frags=normal miss_send_len=0
+])
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - basic flow_mod commands (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - hard limits on flow table size (OpenFLow 1.0)])
+AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - hard limits on flow table size (OpenFLow 1.2)])
+AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
| ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
+ovs-appctl time/stop
# Add 4 flows.
for in_port in 4 3 2 1; do
- ovs-ofctl add-flow br0 hard_timeout=1${in_port},in_port=$in_port,actions=drop
+ ovs-ofctl add-flow br0 hard_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
done
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- hard_timeout=11, in_port=1 actions=drop
- hard_timeout=12, in_port=2 actions=drop
- hard_timeout=13, in_port=3 actions=drop
- hard_timeout=14, in_port=4 actions=drop
+ hard_timeout=13, in_port=1 actions=drop
+ hard_timeout=16, in_port=2 actions=drop
+ hard_timeout=19, in_port=3 actions=drop
+ hard_timeout=22, in_port=4 actions=drop
NXST_FLOW reply:
])
# Sleep and modify the one that expires soonest
-sleep 2
+ovs-appctl time/warp 5000
AT_CHECK([ovs-ofctl mod-flows br0 in_port=1,actions=drop])
-sleep 2
+# At this point the table would looks like:
+# in_port seconds to expire
+# 1 13
+# 2 11
+# 3 14
+# 4 17
+ovs-appctl time/warp 2000
# Adding another flow will cause the one that expires soonest to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- hard_timeout=11, in_port=1 actions=drop
- hard_timeout=13, in_port=3 actions=drop
- hard_timeout=14, in_port=4 actions=drop
+ hard_timeout=13, in_port=1 actions=drop
+ hard_timeout=19, in_port=3 actions=drop
+ hard_timeout=22, in_port=4 actions=drop
in_port=5 actions=drop
NXST_FLOW reply:
])
])
# Add 4 flows.
for in_port in 4 3 2 1; do
- ovs-ofctl add-flow br0 idle_timeout=1${in_port},in_port=$in_port,actions=drop
+ ovs-ofctl add-flow br0 idle_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
done
+ovs-appctl time/stop
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=11, in_port=1 actions=drop
- idle_timeout=12, in_port=2 actions=drop
- idle_timeout=13, in_port=3 actions=drop
- idle_timeout=14, in_port=4 actions=drop
+ idle_timeout=13, in_port=1 actions=drop
+ idle_timeout=16, in_port=2 actions=drop
+ idle_timeout=19, in_port=3 actions=drop
+ idle_timeout=22, in_port=4 actions=drop
NXST_FLOW reply:
])
# Sleep and receive on the flow that expires soonest
-sleep 2
+ovs-appctl time/warp 5000
AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1)'])
-sleep 2
+# At this point the table would looks like:
+# in_port seconds to expire
+# 1 13
+# 2 11
+# 3 14
+# 4 17
+ovs-appctl time/warp 2000
# Adding another flow will cause the one that expires soonest to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=13, in_port=3 actions=drop
- idle_timeout=14, in_port=4 actions=drop
+ idle_timeout=19, in_port=3 actions=drop
+ idle_timeout=22, in_port=4 actions=drop
in_port=5 actions=drop
- n_packets=1, n_bytes=60, idle_timeout=11, in_port=1 actions=drop
+ n_packets=1, n_bytes=60, idle_timeout=13, in_port=1 actions=drop
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=0,actions=output:21
ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=1,actions=output:22
ovs-ofctl add-flow br0 in_port=0,actions=output:23
+ovs-ofctl mod-flows br0 dl_vlan=123,actions=output:3
ovs-ofctl mod-flows br0 cookie=5,dl_vlan=123,actions=output:3
ovs-ofctl del-flows br0 dl_vlan=123
ovs-ofctl del-flows br0
event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
NXST_FLOW_MONITOR reply (xid=0x0):
event=ADDED table=0 cookie=0 in_port=0 actions=output:23
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:3
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
NXST_FLOW_MONITOR reply (xid=0x0):
event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
queue_size=`expr $rmem_max + 128 \* 1024`
echo rmem_max=$rmem_max queue_size=$queue_size
+# If there's too much queuing skip the test to avoid timing out.
+AT_SKIP_IF([test $rmem_max -gt 1048576])
+
# Each flow update message takes up at least 48 bytes of space in queues
# and in practice more than that.
n_msgs=`expr $queue_size / 48`
AT_CHECK([ovs-ofctl del-flows br0 cookie=1/-1])
ovs-appctl -t ovs-ofctl ofctl/unblock
-ovs-appctl -t ovs-ofctl ofctl/barrier
+
+# Wait for the connection resumed.
+# A barrier doesn't work for this purpose.
+# https://www.mail-archive.com/dev@openvswitch.org/msg27013.html
+# https://www.mail-archive.com/dev@openvswitch.org/msg27675.html
+OVS_WAIT_UNTIL([grep NXT_FLOW_MONITOR_RESUMED monitor.log])
ovs-appctl -t ovs-ofctl exit
done
OVS_VSWITCHD_STOP
AT_CLEANUP
+
+
+AT_SETUP([ofproto - bundles, open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Send an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundles, double open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Send twice an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle close without open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle double close (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BUNDLE_CLOSED
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle close, different flags (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
+OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle commit without open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle commit, different flags (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 02"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
+OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle discard without open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 06 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=DISCARD_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=DISCARD_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
projects / cascardo / ovs.git / blobdiff