"abc\u0020def" => "abc def"
" => error("Input ends inside quoted string.")dnl "
+$foo $bar $baz $quuxquuxquux $_abcd_ $a.b.c.d $a123_.456
+$1 => error("`$' must be followed by a valid identifier.") 1
+
a/*b*/c => a c
a//b c => a
a/**/b => a b
192.168.0.0/255.0.0.0 => error("Value contains unmasked 1-bits.")
192.168.0.0/32
192.168.0.0/255.255.255.255 => 192.168.0.0/32
+1.2.3.4:5 => 1.2.3.4 : 5
::
::1
00:01:02:03:04:x => error("Invalid numeric constant.")
# Test that operators are tokenized as expected, even without white space.
-(){}[[]]==!=<<=>>=!&&||..,;=<->-- => ( ) { } [[ ]] == != < <= > >= ! && || .. , ; = <-> --
+(){}[[]]==!=<<=>>=!&&||..,;=<->--: => ( ) { } [[ ]] == != < <= > >= ! && || .. , ; = <-> -- :
& => error("`&' is only valid as part of `&&'.")
| => error("`|' is only valid as part of `||'.")
- => error("`-' is only valid as part of `--'.")
123 == 123 => Syntax error at `123' expecting field name.
+$name => Syntax error at `$name' expecting address set name.
+
123 == xyzzy => Syntax error at `xyzzy' expecting field name.
xyzzy == 1 => Syntax error at `xyzzy' expecting field name.
1 == eth.type == 2 => Range expressions must have the form `x < field < y' or `x > field > y', with each `<' optionally replaced by `<=' or `>' by `>=').
eth.dst[40] x => Extra tokens at end of input.
+
+ip4.src == {1.2.3.4, $set1, $unknownset} => Syntax error at `$unknownset' expecting address set name.
+eth.src == {$set3, badmac, 00:00:00:00:00:01} => Syntax error at `badmac' expecting constant.
]])
sed 's/ =>.*//' test-cases.txt > input.txt
sed 's/.* => //' test-cases.txt > expout
expr_to_flow () {
echo "$1" | ovstest test-ovn expr-to-flows | sort
}
-AT_CHECK([expr_to_flow 'inport == "eth0"'], [0], [reg6=0x5
+AT_CHECK([expr_to_flow 'inport == "eth0"'], [0], [reg14=0x5
])
-AT_CHECK([expr_to_flow 'inport == "eth1"'], [0], [reg6=0x6
+AT_CHECK([expr_to_flow 'inport == "eth1"'], [0], [reg14=0x6
])
AT_CHECK([expr_to_flow 'inport == "eth2"'], [0], [(no flows)
])
AT_CHECK([expr_to_flow 'inport == "eth0" && ip'], [0], [dnl
-ip,reg6=0x5
-ipv6,reg6=0x5
+ip,reg14=0x5
+ipv6,reg14=0x5
])
AT_CHECK([expr_to_flow 'inport == "eth1" && ip'], [0], [dnl
-ip,reg6=0x6
-ipv6,reg6=0x6
+ip,reg14=0x6
+ipv6,reg14=0x6
])
AT_CHECK([expr_to_flow 'inport == "eth2" && ip'], [0], [(no flows)
])
AT_CHECK([expr_to_flow 'inport == {"eth0", "eth1", "eth2", "LOCAL"}'], [0],
-[reg6=0x5
-reg6=0x6
-reg6=0xfffe
+[reg14=0x5
+reg14=0x6
+reg14=0xfffe
])
AT_CHECK([expr_to_flow 'inport == {"eth0", "eth1", "eth2"} && ip'], [0], [dnl
-ip,reg6=0x5
-ip,reg6=0x6
-ipv6,reg6=0x5
-ipv6,reg6=0x6
+ip,reg14=0x5
+ip,reg14=0x6
+ipv6,reg14=0x5
+ipv6,reg14=0x6
])
AT_CHECK([expr_to_flow 'inport == "eth0" && inport == "eth1"'], [0], [dnl
(no flows)
])
AT_CLEANUP
+AT_SETUP([ovn -- converting expressions to flows -- address sets])
+expr_to_flow () {
+ echo "$1" | ovstest test-ovn expr-to-flows | sort
+}
+AT_CHECK([expr_to_flow 'ip4.src == {10.0.0.1, 10.0.0.2, 10.0.0.3}'], [0], [dnl
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+])
+AT_CHECK([expr_to_flow 'ip4.src == $set1'], [0], [dnl
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+])
+AT_CHECK([expr_to_flow 'ip4.src == {1.2.3.4, $set1}'], [0], [dnl
+ip,nw_src=1.2.3.4
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+])
+AT_CHECK([expr_to_flow 'ip4.src == {1.2.0.0/20, 5.5.5.0/24, $set1}'], [0], [dnl
+ip,nw_src=1.2.0.0/20
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+ip,nw_src=5.5.5.0/24
+])
+AT_CHECK([expr_to_flow 'ip6.src == {::1, ::2, ::3}'], [0], [dnl
+ipv6,ipv6_src=::1
+ipv6,ipv6_src=::2
+ipv6,ipv6_src=::3
+])
+AT_CHECK([expr_to_flow 'ip6.src == {::1, $set2, ::4}'], [0], [dnl
+ipv6,ipv6_src=::1
+ipv6,ipv6_src=::2
+ipv6,ipv6_src=::3
+ipv6,ipv6_src=::4
+])
+AT_CHECK([expr_to_flow 'eth.src == {00:00:00:00:00:01, 00:00:00:00:00:02, 00:00:00:00:00:03}'], [0], [dnl
+dl_src=00:00:00:00:00:01
+dl_src=00:00:00:00:00:02
+dl_src=00:00:00:00:00:03
+])
+AT_CHECK([expr_to_flow 'eth.src == {$set3}'], [0], [dnl
+dl_src=00:00:00:00:00:01
+dl_src=00:00:00:00:00:02
+dl_src=00:00:00:00:00:03
+])
+AT_CHECK([expr_to_flow 'eth.src == {00:00:00:00:00:01, $set3, ba:be:be:ef:de:ad, $set3}'], [0], [dnl
+dl_src=00:00:00:00:00:01
+dl_src=00:00:00:00:00:02
+dl_src=00:00:00:00:00:03
+dl_src=ba:be:be:ef:de:ad
+])
+AT_CLEANUP
+
AT_SETUP([ovn -- action parsing])
dnl Text before => is input, text after => is expected output.
AT_DATA([test-cases.txt], [[
eth.dst[40] = 1; => actions=set_field:01:00:00:00:00:00/01:00:00:00:00:00->eth_dst, prereqs=1
vlan.pcp = 2; => actions=set_field:0x4000/0xe000->vlan_tci, prereqs=vlan.tci[12]
vlan.tci[13..15] = 2; => actions=set_field:0x4000/0xe000->vlan_tci, prereqs=1
-inport = ""; => actions=set_field:0->reg6,set_field:0->in_port, prereqs=1
+inport = ""; => actions=set_field:0->reg14,set_field:0->in_port, prereqs=1
ip.ttl = 4; => actions=set_field:4->nw_ttl, prereqs=eth.type == 0x800 || eth.type == 0x86dd
-outport="eth0"; next; outport="LOCAL"; next; => actions=set_field:0x5->reg7,resubmit(,27),set_field:0xfffe->reg7,resubmit(,27), prereqs=1
+outport="eth0"; next; outport="LOCAL"; next; => actions=set_field:0x5->reg15,resubmit(,27),set_field:0xfffe->reg15,resubmit(,27), prereqs=1
inport[1] = 1; => Cannot select subfield of string field inport.
ip.proto[1] = 1; => Cannot select subfield of nominal field ip.proto.
-eth.dst[40] == 1; => Syntax error at `==' expecting `='.
+eth.dst[40] == 1; => Syntax error at `==' expecting `=' or `<->'.
ip = 1; => Predicate symbol ip used where lvalue required.
ip.proto = 6; => Field ip.proto is not modifiable.
inport = {"a", "b"}; => Assignments require a single value.
reg0 = reg1; => actions=move:OXM_OF_PKT_REG0[0..31]->OXM_OF_PKT_REG0[32..63], prereqs=1
vlan.pcp = reg0[0..2]; => actions=move:OXM_OF_PKT_REG0[32..34]->NXM_OF_VLAN_TCI[13..15], prereqs=vlan.tci[12]
reg0[10] = vlan.pcp[1]; => actions=move:NXM_OF_VLAN_TCI[14]->OXM_OF_PKT_REG0[42], prereqs=vlan.tci[12]
-outport = inport; => actions=move:NXM_NX_REG6[]->NXM_NX_REG7[], prereqs=1
+outport = inport; => actions=move:NXM_NX_REG14[]->NXM_NX_REG15[], prereqs=1
reg0[0] = vlan.present; => Predicate symbol vlan.present used where lvalue required.
reg0 = reg1[0..10]; => Can't assign 11-bit value to 32-bit destination.
reg0 <-> reg1; => actions=push:OXM_OF_PKT_REG0[0..31],push:OXM_OF_PKT_REG0[32..63],pop:OXM_OF_PKT_REG0[0..31],pop:OXM_OF_PKT_REG0[32..63], prereqs=1
vlan.pcp <-> reg0[0..2]; => actions=push:OXM_OF_PKT_REG0[32..34],push:NXM_OF_VLAN_TCI[13..15],pop:OXM_OF_PKT_REG0[32..34],pop:NXM_OF_VLAN_TCI[13..15], prereqs=vlan.tci[12]
reg0[10] <-> vlan.pcp[1]; => actions=push:NXM_OF_VLAN_TCI[14],push:OXM_OF_PKT_REG0[42],pop:NXM_OF_VLAN_TCI[14],pop:OXM_OF_PKT_REG0[42], prereqs=vlan.tci[12]
-outport <-> inport; => actions=push:NXM_NX_REG6[],push:NXM_NX_REG7[],pop:NXM_NX_REG6[],pop:NXM_NX_REG7[], prereqs=1
+outport <-> inport; => actions=push:NXM_NX_REG14[],push:NXM_NX_REG15[],pop:NXM_NX_REG14[],pop:NXM_NX_REG15[], prereqs=1
reg0[0] <-> vlan.present; => Predicate symbol vlan.present used where lvalue required.
reg0 <-> reg1[0..10]; => Can't exchange 32-bit field with 11-bit field.
ip.ttl--; => actions=dec_ttl, prereqs=ip
ip.ttl => Syntax error at end of input expecting `--'.
+# load balancing.
+ct_lb; => actions=ct(table=27,zone=NXM_NX_REG13[0..15],nat), prereqs=ip
+ct_lb(); => Syntax error at `)' expecting IPv4 address.
+ct_lb(192.168.1.2:80, 192.168.1.3:80); => actions=group:1, prereqs=ip
+ct_lb(192.168.1.2, 192.168.1.3, ); => actions=group:2, prereqs=ip
+ct_lb(192.168.1.2:); => Syntax error at `)' expecting port number.
+ct_lb(192.168.1.2:123456); => Syntax error at `123456' expecting port number.
+ct_lb(foo); => Syntax error at `foo' expecting IPv4 address.
+
# conntrack
-ct_next; => actions=ct(table=27,zone=NXM_NX_REG5[0..15]), prereqs=ip
-ct_commit; => actions=ct(commit,zone=NXM_NX_REG5[0..15]), prereqs=ip
+ct_next; => actions=ct(table=27,zone=NXM_NX_REG13[0..15]), prereqs=ip
+ct_commit; => actions=ct(commit,zone=NXM_NX_REG13[0..15]), prereqs=ip
+ct_commit(); => actions=ct(commit,zone=NXM_NX_REG13[0..15]), prereqs=ip
+ct_commit(ct_mark=1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1->ct_mark)), prereqs=ip
+ct_commit(ct_mark=1/1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1/0x1->ct_mark)), prereqs=ip
+ct_commit(ct_label=1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1->ct_label)), prereqs=ip
+ct_commit(ct_label=1/1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1/0x1->ct_label)), prereqs=ip
+ct_commit(ct_label=0x01020304050607080910111213141516); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1020304050607080910111213141516->ct_label)), prereqs=ip
+ct_commit(ct_label=0x181716151413121110090807060504030201); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x16151413121110090807060504030201->ct_label)), prereqs=ip
+ct_commit(ct_label=0x01000000000000000000000000000000/0x01000000000000000000000000000000); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1000000000000000000000000000000/0x1000000000000000000000000000000->ct_label)), prereqs=ip
+ct_commit(ct_label=18446744073709551615); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0xffffffffffffffff->ct_label)), prereqs=ip
+ct_commit(ct_label=18446744073709551616); => Decimal constants must be less than 2**64.
+ct_commit(ct_mark=1, ct_label=2); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1->ct_mark,set_field:0x2->ct_label)), prereqs=ip
+
+# dnat
+ct_dnat; => actions=ct(table=27,zone=NXM_NX_REG11[0..15],nat), prereqs=ip
+ct_dnat(192.168.1.2); => actions=ct(commit,table=27,zone=NXM_NX_REG11[0..15],nat(dst=192.168.1.2)), prereqs=ip
+ct_dnat(192.168.1.2, 192.168.1.3); => Syntax error at `,' expecting `)'.
+ct_dnat(foo); => Syntax error at `foo' invalid ip.
+ct_dnat(foo, bar); => Syntax error at `foo' invalid ip.
+ct_dnat(); => Syntax error at `)' invalid ip.
+
+# snat
+ct_snat; => actions=ct(zone=NXM_NX_REG12[0..15],nat), prereqs=ip
+ct_snat(192.168.1.2); => actions=ct(commit,table=27,zone=NXM_NX_REG12[0..15],nat(src=192.168.1.2)), prereqs=ip
+ct_snat(192.168.1.2, 192.168.1.3); => Syntax error at `,' expecting `)'.
+ct_snat(foo); => Syntax error at `foo' invalid ip.
+ct_snat(foo, bar); => Syntax error at `foo' invalid ip.
+ct_snat(); => Syntax error at `)' invalid ip.
+
# arp
arp { eth.dst = ff:ff:ff:ff:ff:ff; output; }; => actions=controller(userdata=00.00.00.00.00.00.00.00.00.19.00.10.80.00.06.06.ff.ff.ff.ff.ff.ff.00.00.ff.ff.00.10.00.00.23.20.00.0e.ff.f8.40.00.00.00), prereqs=ip4
# get_arp
get_arp(outport, ip4.dst); => actions=push:NXM_NX_REG0[],push:NXM_OF_IP_DST[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[], prereqs=eth.type == 0x800
-get_arp(inport, reg0); => actions=push:NXM_NX_REG7[],push:NXM_NX_REG0[],push:OXM_OF_PKT_REG0[32..63],push:NXM_NX_REG6[],pop:NXM_NX_REG7[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[],pop:NXM_NX_REG7[], prereqs=1
+get_arp(inport, reg0); => actions=push:NXM_NX_REG15[],push:NXM_NX_REG0[],push:OXM_OF_PKT_REG0[32..63],push:NXM_NX_REG14[],pop:NXM_NX_REG15[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[],pop:NXM_NX_REG15[], prereqs=1
get_arp; => Syntax error at `;' expecting `('.
get_arp(); => Syntax error at `)' expecting field name.
get_arp(inport); => Syntax error at `)' expecting `,'.
# put_arp
put_arp(inport, arp.spa, arp.sha); => actions=push:NXM_NX_REG0[],push:NXM_OF_ETH_SRC[],push:NXM_NX_ARP_SHA[],push:NXM_OF_ARP_SPA[],pop:NXM_NX_REG0[],pop:NXM_OF_ETH_SRC[],controller(userdata=00.00.00.01.00.00.00.00),pop:NXM_OF_ETH_SRC[],pop:NXM_NX_REG0[], prereqs=eth.type == 0x806 && eth.type == 0x806
+# put_dhcp_opts
+reg1[0] = put_dhcp_opts(offerip = 1.2.3.4, router = 10.0.0.1); => actions=controller(userdata=00.00.00.02.00.00.00.00.80.01.00.08.00.00.00.00.01.02.03.04.03.04.0a.00.00.01,pause), prereqs=1
+reg2[5] = put_dhcp_opts(offerip=10.0.0.4,router=10.0.0.1,netmask=255.255.254.0,mtu=1400,domain="ovn.org"); => actions=controller(userdata=00.00.00.02.00.00.00.00.80.01.02.08.00.00.00.25.0a.00.00.04.03.04.0a.00.00.01.01.04.ff.ff.fe.00.1a.02.05.78.0f.07.6f.76.6e.2e.6f.72.67,pause), prereqs=1
+# offerip=10.0.0.4 --> 0a.00.00.04
+# router=10.0.0.1 --> 03.04.0a.00.00.01
+# netmask=255.255.255.0 --> 01.04.ff.ff.ff.00
+# mtu=1400 --> 1a.02.05.78
+# ip_forward_enable-1 --> 13.01.01
+# default_ttl=121 --> 17.01.79
+# dns_server={8.8.8.8,7.7.7.7} --> 06.08.08.08.08.08.07.07.07.07
+# classless_static_route= --> 79.14
+# {30.0.0.0/24,10.0.0.4 --> 18.1e.00.00.0a.00.00.04
+# 40.0.0.0/16,10.0.0.6 --> 10.28.00.0a.00.00.06
+# 0.0.0.0/0,10.0.0.1} --> 00.0a.00.00.01
+# ethernet_encap=1 --> 24.01.01
+# router_discovery=0 --> 1f.01.00
+reg0[15] = put_dhcp_opts(offerip=10.0.0.4,router=10.0.0.1,netmask=255.255.255.0,mtu=1400,ip_forward_enable=1,default_ttl=121,dns_server={8.8.8.8,7.7.7.7},classless_static_route={30.0.0.0/24,10.0.0.4,40.0.0.0/16,10.0.0.6,0.0.0.0/0,10.0.0.1},ethernet_encap=1,router_discovery=0); => actions=controller(userdata=00.00.00.02.00.00.00.00.80.01.00.08.00.00.00.2f.0a.00.00.04.03.04.0a.00.00.01.01.04.ff.ff.ff.00.1a.02.05.78.13.01.01.17.01.79.06.08.08.08.08.08.07.07.07.07.79.14.18.1e.00.00.0a.00.00.04.10.28.00.0a.00.00.06.00.0a.00.00.01.24.01.01.1f.01.00,pause), prereqs=1
+reg1[0..1] = put_dhcp_opts(offerip = 1.2.3.4, router = 10.0.0.1); => Cannot use 2-bit field reg1[0..1] where 1-bit field is required.
+reg1[0] = put_dhcp_opts(); => Syntax error at `)'.
+reg1[0] = put_dhcp_opts(x = 1.2.3.4, router = 10.0.0.1); => Syntax error at `x' expecting offerip option.
+reg1[0] = put_dhcp_opts(offerip=1.2.3.4, "hi"); => Syntax error at `"hi"'.
+reg1[0] = put_dhcp_opts(offerip=1.2.3.4, xyzzy); => Syntax error at `xyzzy' expecting DHCP option name.
+reg1[0] = put_dhcp_opts(offerip="xyzzy"); => DHCP option offerip requires numeric value.
+reg1[0] = put_dhcp_opts(offerip=1.2.3.4, domain=1.2.3.4); => DHCP option domain requires string value.
+
+# na
+na { eth.src = 12:34:56:78:9a:bc; nd.tll = 12:34:56:78:9a:bc; outport = inport; inport = ""; /* Allow sending out inport. */ output; }; => actions=controller(userdata=00.00.00.03.00.00.00.00.00.19.00.10.80.00.08.06.12.34.56.78.9a.bc.00.00.00.19.00.10.80.00.42.06.12.34.56.78.9a.bc.00.00.ff.ff.00.18.00.00.23.20.00.06.00.20.00.00.00.00.00.01.1c.04.00.01.1e.04.00.19.00.10.00.01.1c.04.00.00.00.00.00.00.00.00.00.19.00.10.00.00.00.02.00.00.00.00.00.00.00.00.ff.ff.00.10.00.00.23.20.00.0e.ff.f8.40.00.00.00), prereqs=nd
+
# Contradictionary prerequisites (allowed but not useful):
ip4.src = ip6.src[0..31]; => actions=move:NXM_NX_IPV6_SRC[0..31]->NXM_OF_IP_SRC[], prereqs=eth.type == 0x800 && eth.type == 0x86dd
ip4.src <-> ip6.src[0..31]; => actions=push:NXM_NX_IPV6_SRC[0..31],push:NXM_OF_IP_SRC[],pop:NXM_NX_IPV6_SRC[0..31],pop:NXM_OF_IP_SRC[], prereqs=eth.type == 0x800 && eth.type == 0x86dd
# Turn on port security on all the vifs except vif[123]1.
# Make vif13, vif2[23], vif3[123] destinations for unknown MACs.
# Add some ACLs for Ethertypes 1234, 1235, 1236.
-ovn-nbctl lswitch-add lsw0
+ovn-nbctl ls-add lsw0
net_add n1
for i in 1 2 3; do
sim_add hv$i
ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1234' drop
ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1235 && inport == "lp11"' drop
ovn-nbctl acl-add lsw0 to-lport 1000 'eth.type == 0x1236 && outport == "lp33"' drop
+ovn-nbctl create Address_Set name=set1 addresses=\"f0:00:00:00:00:11\",\"f0:00:00:00:00:21\",\"f0:00:00:00:00:31\"
+ovn-nbctl acl-add lsw0 to-lport 1000 'eth.type == 0x1237 && eth.src == $set1 && outport == "lp33"' drop
# Pre-populate the hypervisors' ARP tables so that we don't lose any
# packets for ARP resolution (native tunneling doesn't queue packets
# 2. Broadcast and multicast are delivered to all logical switch ports
# except the input port.
#
-# 3. When port security is turned on, the lswitch drops packets from the wrong
+# 3. When port security is turned on, the switch drops packets from the wrong
# MAC address.
#
-# 4. The lswitch drops all packets with a VLAN tag.
+# 4. The switch drops all packets with a VLAN tag.
#
-# 5. The lswitch drops all packets with a multicast source address. (This only
+# 5. The switch drops all packets with a multicast source address. (This only
# affects behavior when port security is turned off, since otherwise port
# security would drop the packet anyway.)
#
-# 6. The lswitch delivers packets with an unknown destination to logical
+# 6. The switch delivers packets with an unknown destination to logical
# switch ports with "unknown" among their MAC addresses (and port
# security disabled).
#
-# 7. The lswitch drops unicast packets that violate an ACL.
+# 7. The switch drops unicast packets that violate an ACL.
#
-# 8. The lswitch drops multicast and broadcast packets that violate an ACL.
+# 8. The switch drops multicast and broadcast packets that violate an ACL.
#
# 9. ARP requests to known IPs are responded directly.
#
if test $d != $s && test $s != 11; then acl2=$d; else acl2=; fi
if test $d != $s && test $d != 33; then acl3=$d; else acl3=; fi
+ if test $d = $s || (test $js = 1 && test $d = 33); then
+ # Source of 11, 21, or 31 and dest of 33 should be dropped
+ # due to the 4th ACL that uses address_set(set1).
+ acl4=
+ else
+ acl4=$d
+ fi
test_packet $s f000000000$d f000000000$s 1234 #7, acl1
test_packet $s f000000000$d f000000000$s 1235 $acl2 #7, acl2
test_packet $s f000000000$d f000000000$s 1236 $acl3 #7, acl3
+ test_packet $s f000000000$d f000000000$s 1237 $acl4 #7, acl4
test_packet $s f000000000$d f00000000055 810000091234 #4
test_packet $s f000000000$d 0100000000$s $s$d #5
done
done
-# Gracefully terminate daemons
-for sim in hv1 hv2 hv3; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2],[hv3])
AT_CLEANUP
AT_SKIP_IF([test $HAVE_PYTHON = no])
ovn_start
-# In this test cases we create 3 lswitches, all connected to same
-# physical network (through br-phys on each HV). Each lswitch has
+# In this test cases we create 3 switches, all connected to same
+# physical network (through br-phys on each HV). Each switch has
# VIF ports across 2 HVs. Each HV has 5 VIF ports. The first digit
# of VIF port name indicates the hypervisor it is bound to, e.g.
# lp23 means VIF 3 on hv2.
#
-# lswitch's VLAN tag and their logical switch ports are:
+# Each switch's VLAN tag and their logical switch ports are:
# - ls1:
# - untagged
-# - lports: lp11, lp12, lp21, lp22
+# - ports: lp11, lp12, lp21, lp22
#
# - ls2:
# - tagged with VLAN 101
-# - lports: lp13, lp14, lp23, lp24
+# - ports: lp13, lp14, lp23, lp24
# - ls3:
# - untagged
-# - lports: lp15, lp25
+# - ports: lp15, lp25
#
-# Note: a localnet port is created for each lswitch to connect to
+# Note: a localnet port is created for each switch to connect to
# physical network.
for i in 1 2 3; do
- lswitch_name=ls$i
- ovn-nbctl lswitch-add $lswitch_name
+ ls_name=ls$i
+ ovn-nbctl ls-add $ls_name
ln_port_name=ln$i
if test $i -eq 2; then
- ovn-nbctl lsp-add $lswitch_name $ln_port_name "" 101
+ ovn-nbctl lsp-add $ls_name $ln_port_name "" 101
else
- ovn-nbctl lsp-add $lswitch_name $ln_port_name
+ ovn-nbctl lsp-add $ls_name $ln_port_name
fi
ovn-nbctl lsp-set-addresses $ln_port_name unknown
ovn-nbctl lsp-set-type $ln_port_name localnet
lsp_name=lp$i$j
if test $j -le 2; then
- lswitch_name=ls1
+ ls_name=ls1
elif test $j -le 4; then
- lswitch_name=ls2
+ ls_name=ls2
else
- lswitch_name=ls3
+ ls_name=ls3
fi
- ovn-nbctl lsp-add $lswitch_name $lsp_name
+ ovn-nbctl lsp-add $ls_name $lsp_name
ovn-nbctl lsp-set-addresses $lsp_name f0:00:00:00:00:$i$j
ovn-nbctl lsp-set-port-security $lsp_name f0:00:00:00:00:$i$j
test_packet 14 f00000000013 f00000000014 1413 13
# lp11 and lp15 are on the same network (phys, untagged),
-# same hypervisor, and on different lswitches
+# same hypervisor, and on different switches
test_packet 11 f00000000015 f00000000011 1115 15
test_packet 15 f00000000011 f00000000015 1511 11
# lp11 and lp25 are on the same network (phys, untagged),
-# different hypervisors, and on different lswitches
+# different hypervisors, and on different switches
test_packet 11 f00000000025 f00000000011 1125 25
test_packet 25 f00000000011 f00000000025 2511 11
done
done
-# Gracefully terminate daemons
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
+OVN_CLEANUP([hv1],[hv2])
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
AT_CLEANUP
AT_SETUP([ovn -- vtep: 3 HVs, 1 VIFs/HV, 1 GW, 1 LS])
ovn_start
# Configure the Northbound database
-ovn-nbctl lswitch-add lsw0
+ovn-nbctl ls-add lsw0
ovn-nbctl lsp-add lsw0 lp1
ovn-nbctl lsp-set-addresses lp1 f0:00:00:00:00:01
# 2. Broadcast and multicast are delivered to all logical switch ports
# except the input port.
#
-# 3. The lswitch delivers packets with an unknown destination to logical
+# 3. The switch delivers packets with an unknown destination to logical
# switch ports with "unknown" among their MAC addresses (and port
# security disabled).
for s in 1 2 3; do
done
# Gracefully terminate daemons
-as vtep
-OVS_APP_EXIT_AND_WAIT([ovn-controller-vtep])
-OVS_APP_EXIT_AND_WAIT([ovs-vtep])
+OVN_CLEANUP([hv1],[hv2],[vtep])
+OVN_CLEANUP_VSWITCH([hv3])
+
+AT_CLEANUP
+
+# Similar test to "hardware GW"
+AT_SETUP([ovn -- 3 HVs, 1 VIFs/HV, 1 software GW, 1 LS])
+AT_SKIP_IF([test $HAVE_PYTHON = no])
+ovn_start
+
+# Configure the Northbound database
+ovn-nbctl ls-add lsw0
+
+ovn-nbctl lsp-add lsw0 lp1
+ovn-nbctl lsp-set-addresses lp1 f0:00:00:00:00:01
+
+ovn-nbctl lsp-add lsw0 lp2
+ovn-nbctl lsp-set-addresses lp2 f0:00:00:00:00:02
+ovn-nbctl lsp-add lsw0 lp-gw
+ovn-nbctl lsp-set-type lp-gw l2gateway
+ovn-nbctl lsp-set-options lp-gw network_name=physnet1 l2gateway-chassis=hv_gw
+ovn-nbctl lsp-set-addresses lp-gw unknown
+
+net_add n1 # Network to connect hv1, hv2, and gw
+net_add n2 # Network to connect gw and hv3
+
+# Create hypervisor hv1 connected to n1
+sim_add hv1
as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.1
+ovs-vsctl add-port br-int vif1 -- set Interface vif1 external-ids:iface-id=lp1 options:tx_pcap=hv1/vif1-tx.pcap options:rxq_pcap=hv1/vif1-rx.pcap ofport-request=1
+# Create hypervisor hv2 connected to n1
+sim_add hv2
as hv2
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.2
+ovs-vsctl add-port br-int vif2 -- set Interface vif2 external-ids:iface-id=lp2 options:tx_pcap=hv2/vif2-tx.pcap options:rxq_pcap=hv2/vif2-rx.pcap ofport-request=1
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+# Create hypervisor hv_gw connected to n1 and n2
+# connect br-phys bridge to n1; connect hv-gw bridge to n2
+sim_add hv_gw
+as hv_gw
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.3
+ovs-vsctl add-br br-phys2
+net_attach n2 br-phys2
+ovs-vsctl set open . external_ids:ovn-bridge-mappings="physnet1:br-phys2"
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+# Add hv3 on the other side of the GW
+sim_add hv3
+as hv3
+ovs-vsctl add-br br-phys
+net_attach n2 br-phys
+ovs-vsctl add-port br-phys vif3 -- set Interface vif3 options:tx_pcap=hv3/vif3-tx.pcap options:rxq_pcap=hv3/vif3-rx.pcap ofport-request=1
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-for sim in hv1 hv2 hv3 vtep main; do
- as $sim
- for daemon in ovs-vswitchd ovsdb-server; do
- OVS_APP_EXIT_AND_WAIT([$daemon])
+# Pre-populate the hypervisors' ARP tables so that we don't lose any
+# packets for ARP resolution (native tunneling doesn't queue packets
+# for ARP resolution).
+ovn_populate_arp
+
+# Allow some time for ovn-northd and ovn-controller to catch up.
+# XXX This should be more systematic.
+sleep 1
+
+# test_packet INPORT DST SRC ETHTYPE OUTPORT...
+#
+# This shell function causes a packet to be received on INPORT. The packet's
+# content has Ethernet destination DST and source SRC (each exactly 12 hex
+# digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or
+# more) list the VIFs on which the packet should be received. INPORT and the
+# OUTPORTs are specified as lport numbers, e.g. 1 for vif1.
+trim_zeros() {
+ sed 's/\(00\)\{1,\}$//'
+}
+for i in 1 2 3; do
+ : > $i.expected
+done
+test_packet() {
+ local inport=$1 packet=$2$3$4; shift; shift; shift; shift
+ #hv=hv`echo $inport | sed 's/^\(.\).*/\1/'`
+ hv=hv$inport
+ vif=vif$inport
+ as $hv ovs-appctl netdev-dummy/receive $vif $packet
+ for outport; do
+ echo $packet | trim_zeros >> $outport.expected
+ done
+}
+
+# Send packets between all pairs of source and destination ports:
+#
+# 1. Unicast packets are delivered to exactly one lport (except that packets
+# destined to their input ports are dropped).
+#
+# 2. Broadcast and multicast are delivered to all lports except the input port.
+#
+# 3. The lswitch delivers packets with an unknown destination to lports with
+# "unknown" among their MAC addresses (and port security disabled).
+for s in 1 2 3 ; do
+ bcast=
+ unknown=
+ for d in 1 2 3 ; do
+ if test $d != $s; then unicast=$d; else unicast=; fi
+ test_packet $s f0000000000$d f0000000000$s 00$s$d $unicast #1
+
+ # The vtep (vif3) is the only one configured for "unknown"
+ if test $d != $s && test $d = 3; then
+ unknown="$unknown $d"
+ fi
+ bcast="$bcast $unicast"
done
+
+ test_packet $s ffffffffffff f0000000000$s 0${s}ff $bcast #2
+ test_packet $s 010000000000 f0000000000$s 0${s}ff $bcast #3
+ test_packet $s f0000000ffff f0000000000$s 0${s}66 $unknown #4
+done
+
+# Allow some time for packet forwarding.
+# XXX This can be improved.
+sleep 3
+
+echo "------ ovn-nbctl show ------"
+ovn-nbctl show
+echo "------ ovn-sbctl show ------"
+ovn-sbctl show
+
+echo "------ hv1 ------"
+as hv1 ovs-vsctl show
+echo "------ hv1 br-int ------"
+as hv1 ovs-ofctl -O OpenFlow13 dump-flows br-int
+echo "------ hv1 br-phys ------"
+as hv1 ovs-ofctl -O OpenFlow13 dump-flows br-phys
+
+echo "------ hv2 ------"
+as hv2 ovs-vsctl show
+echo "------ hv2 br-int ------"
+as hv2 ovs-ofctl -O OpenFlow13 dump-flows br-int
+echo "------ hv2 br-phys ------"
+as hv2 ovs-ofctl -O OpenFlow13 dump-flows br-phys
+
+echo "------ hv_gw ------"
+as hv_gw ovs-vsctl show
+echo "------ hv_gw br-phys ------"
+as hv_gw ovs-ofctl -O OpenFlow13 dump-flows br-phys
+echo "------ hv_gw br-phys2 ------"
+as hv_gw ovs-ofctl -O OpenFlow13 dump-flows br-phys2
+
+echo "------ hv3 ------"
+as hv3 ovs-vsctl show
+echo "------ hv3 br-phys ------"
+as hv3 ovs-ofctl -O OpenFlow13 dump-flows br-phys
+
+# Now check the packets actually received against the ones expected.
+for i in 1 2 3; do
+ file=hv$i/vif$i-tx.pcap
+ echo $file
+ $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i.packets
+ sort $i.expected > expout
+ AT_CHECK([sort $i.packets], [0], [expout])
+ echo
done
AT_CLEANUP
# 27 VIFs, 9 per LS, 3 per subnet: lp[123][123][123], where the first two
# digits are the subnet and the last digit distinguishes the VIF.
for i in 1 2 3; do
- ovn-nbctl lswitch-add ls$i
+ ovn-nbctl ls-add ls$i
for j in 1 2 3; do
for k in 1 2 3; do
# Add "unknown" to MAC addresses for lp?11, so packets for
ovn-nbctl lr-add lr0
for i in 1 2 3; do
for j in 1 2 3; do
- ovn-nbctl lrp-add lr0 lrp$i$j 00:00:00:00:ff:$i$j \
- 192.168.$i$j.254/24 lrp$i$j-attachment
- ovn-nbctl \
+ ovn-nbctl lrp-add lr0 lrp$i$j 00:00:00:00:ff:$i$j 192.168.$i$j.254/24
+ ovn-nbctl \
-- lsp-add ls$i lrp$i$j-attachment \
- -- set Logical_Switch_Port lrp$i$j-attachment type=router \
+ -- set Logical_Switch_Port lrp$i$j-attachment type=router \
options:router-port=lrp$i$j \
addresses='"00:00:00:00:ff:'$i$j'"'
done
for i in 1 2 3; do
for j in 1 2 3; do
for k in 1 2 3; do
- hv=`vif_to_hv $i$j$k`
- as hv$hv ovs-vsctl \
- -- add-port br-int vif$i$j$k \
- -- set Interface vif$i$j$k \
- external-ids:iface-id=lp$i$j$k \
- options:tx_pcap=hv$hv/vif$i$j$k-tx.pcap \
- options:rxq_pcap=hv$hv/vif$i$j$k-rx.pcap \
- ofport-request=$i$j$k
+ hv=`vif_to_hv $i$j$k`
+ as hv$hv ovs-vsctl \
+ -- add-port br-int vif$i$j$k \
+ -- set Interface vif$i$j$k \
+ external-ids:iface-id=lp$i$j$k \
+ options:tx_pcap=hv$hv/vif$i$j$k-tx.pcap \
+ options:rxq_pcap=hv$hv/vif$i$j$k-rx.pcap \
+ ofport-request=$i$j$k
done
done
done
for j in 1 2 3; do
for k in 1 2 3; do
: > $i$j$k.expected
- done
+ done
done
done
test_ip() {
in_ls=`vif_to_ls $inport`
in_lrp=`vif_to_lrp $inport`
for outport; do
- out_ls=`vif_to_ls $outport`
+ out_ls=`vif_to_ls $outport`
if test $in_ls = $out_ls; then
# Ports on the same logical switch receive exactly the same packet.
echo $packet
else
# Routing decrements TTL and updates source and dest MAC
# (and checksum).
- out_lrp=`vif_to_lrp $outport`
+ out_lrp=`vif_to_lrp $outport`
echo f00000000${outport}00000000ff${out_lrp}08004500001c00000000"3f1101"00${src_ip}${dst_ip}0035111100080000
fi | trim_zeros >> $outport.expected
done
printf "%02x%02x%02x%02x" "$@"
}
for is in 1 2 3; do
- for js in 1 2 3; do
- for ks in 1 2 3; do
- bcast=
- s=$is$js$ks
- smac=f00000000$s
- sip=`ip_to_hex 192 168 $is$js $ks`
- for id in 1 2 3; do
- for jd in 1 2 3; do
- for kd in 1 2 3; do
- d=$id$jd$kd
- dip=`ip_to_hex 192 168 $id$jd $kd`
- if test $is = $id; then dmac=f00000000$d; else dmac=00000000ff$is$js; fi
- if test $d != $s; then unicast=$d; else unicast=; fi
-
- test_ip $s $smac $dmac $sip $dip $unicast #1
-
- if test $id = $is && test $d != $s; then bcast="$bcast $d"; fi
- done
- done
- done
- test_ip $s $smac ffffffffffff $sip ffffffff $bcast #2
+ for js in 1 2 3; do
+ for ks in 1 2 3; do
+ bcast=
+ s=$is$js$ks
+ smac=f00000000$s
+ sip=`ip_to_hex 192 168 $is$js $ks`
+ for id in 1 2 3; do
+ for jd in 1 2 3; do
+ for kd in 1 2 3; do
+ d=$id$jd$kd
+ dip=`ip_to_hex 192 168 $id$jd $kd`
+ if test $is = $id; then dmac=f00000000$d; else dmac=00000000ff$is$js; fi
+ if test $d != $s; then unicast=$d; else unicast=; fi
+
+ test_ip $s $smac $dmac $sip $dip $unicast #1
+
+ if test $id = $is && test $d != $s; then bcast="$bcast $d"; fi
+ done
+ done
done
- done
+ test_ip $s $smac ffffffffffff $sip ffffffff $bcast #2
+ done
+ done
done
# 3. Send an IP packet from every logical port to every other subnet,
# This should generate a broadcast ARP request for the destination
# IP address in the destination subnet.
for is in 1 2 3; do
- for js in 1 2 3; do
- for ks in 1 2 3; do
- s=$is$js$ks
- smac=f00000000$s
- sip=`ip_to_hex 192 168 $is$js $ks`
- for id in 1 2 3; do
- for jd in 1 2 3; do
- if test $is$js = $id$jd; then
- continue
- fi
-
- # Send the packet.
- dmac=00000000ff$is$js
- # Calculate a 4th octet for the destination that is
- # unique per $s, avoids the .1 .2 .3 and .254 IP addresses
- # that have static MAC bindings, and fits in the range
- # 0-255.
- o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10`
- dip=`ip_to_hex 192 168 $id$jd $o4`
- test_ip $s $smac $dmac $sip $dip
-
- # Every LP on the destination subnet's lswitch should
- # receive the ARP request.
- lrmac=00000000ff$id$jd
- lrip=`ip_to_hex 192 168 $id$jd 254`
- arp=ffffffffffff${lrmac}08060001080006040001${lrmac}${lrip}000000000000${dip}
- for jd2 in 1 2 3; do
- for kd in 1 2 3; do
- echo $arp | trim_zeros >> $id$jd2$kd.expected
- done
- done
- done
+ for js in 1 2 3; do
+ for ks in 1 2 3; do
+ s=$is$js$ks
+ smac=f00000000$s
+ sip=`ip_to_hex 192 168 $is$js $ks`
+ for id in 1 2 3; do
+ for jd in 1 2 3; do
+ if test $is$js = $id$jd; then
+ continue
+ fi
+
+ # Send the packet.
+ dmac=00000000ff$is$js
+ # Calculate a 4th octet for the destination that is
+ # unique per $s, avoids the .1 .2 .3 and .254 IP addresses
+ # that have static MAC bindings, and fits in the range
+ # 0-255.
+ o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10`
+ dip=`ip_to_hex 192 168 $id$jd $o4`
+ test_ip $s $smac $dmac $sip $dip
+
+ # Every LP on the destination subnet's lswitch should
+ # receive the ARP request.
+ lrmac=00000000ff$id$jd
+ lrip=`ip_to_hex 192 168 $id$jd 254`
+ arp=ffffffffffff${lrmac}08060001080006040001${lrmac}${lrip}000000000000${dip}
+ for jd2 in 1 2 3; do
+ for kd in 1 2 3; do
+ echo $arp | trim_zeros >> $id$jd2$kd.expected
done
+ done
done
+ done
done
+ done
done
# test_arp INPORT SHA SPA TPA [REPLY_HA]
#as $hv ovs-appctl ofproto/trace br-int in_port=$inport $request
# Expect to receive the broadcast ARP on the other logical switch ports if
- # IP address is not configured to the lswitch patch port.
+ # IP address is not configured to the switch patch port.
local i=`vif_to_ls $inport`
local j k
for j in 1 2 3; do
for k in 1 2 3; do
- # 192.168.33.254 is configured to the lswitch patch port for lrp33,
+ # 192.168.33.254 is configured to the switch patch port for lrp33,
# so no ARP flooding expected for it.
if test $i$j$k != $inport && test $tpa != `ip_to_hex 192 168 33 254`; then
echo $request >> $i$j$k.expected
#
# 7. No reply to query for IP address other than router IP.
for i in 1 2 3; do
- for j in 1 2 3; do
- for k in 1 2 3; do
- smac=f00000000$i$j$k # Source MAC
- sip=`ip_to_hex 192 168 $i$j $k` # Source IP
- rip=`ip_to_hex 192 168 $i$j 254` # Router IP
- rmac=00000000ff$i$j # Router MAC
- otherip=`ip_to_hex 192 168 $i$j 55` # Some other IP in subnet
- test_arp $i$j$k $smac $sip $rip $rmac #4
- test_arp $i$j$k $smac $otherip $rip $rmac #5
- test_arp $i$j$k $smac 0a123456 $rip $rmac #6
- test_arp $i$j$k $smac $sip $otherip #7
- done
+ for j in 1 2 3; do
+ for k in 1 2 3; do
+ smac=f00000000$i$j$k # Source MAC
+ sip=`ip_to_hex 192 168 $i$j $k` # Source IP
+ rip=`ip_to_hex 192 168 $i$j 254` # Router IP
+ rmac=00000000ff$i$j # Router MAC
+ otherip=`ip_to_hex 192 168 $i$j 55` # Some other IP in subnet
+ test_arp $i$j$k $smac $sip $rip $rmac #4
+ test_arp $i$j$k $smac $otherip $rip $rmac #5
+ test_arp $i$j$k $smac 0a123456 $rip $rmac #6
+ test_arp $i$j$k $smac $sip $otherip #7
done
+ done
done
# Allow some time for packet forwarding.
# it means that $s and $d are the same as #3.
: > mac_bindings.expected
for is in 1 2 3; do
- for js in 1 2 3; do
- for ks in 1 2 3; do
- s=$is$js$ks
- for id in 1 2 3; do
- for jd in 1 2 3; do
- if test $is$js = $id$jd; then
- continue
- fi
-
- kd=1
- d=$id$jd$kd
-
- o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10`
- host_ip=`ip_to_hex 192 168 $id$jd $o4`
- host_mac=8000000000$o4
-
- lrmac=00000000ff$id$jd
- lrip=`ip_to_hex 192 168 $id$jd 254`
-
- arp=${lrmac}${host_mac}08060001080006040002${host_mac}${host_ip}${lrmac}${lrip}
-
- echo
- echo
- echo
- hv=hv`vif_to_hv $d`
- as $hv ovs-appctl netdev-dummy/receive vif$d $arp
- #as $hv ovs-appctl ofproto/trace br-int in_port=$d $arp
- #as $hv ovs-ofctl dump-flows br-int table=19
-
- host_ip_pretty=192.168.$id$jd.$o4
- host_mac_pretty=80:00:00:00:00:$o4
- echo lrp$id$jd,$host_ip_pretty,$host_mac_pretty >> mac_bindings.expected
- done
- done
+ for js in 1 2 3; do
+ for ks in 1 2 3; do
+ s=$is$js$ks
+ for id in 1 2 3; do
+ for jd in 1 2 3; do
+ if test $is$js = $id$jd; then
+ continue
+ fi
+
+ kd=1
+ d=$id$jd$kd
+
+ o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10`
+ host_ip=`ip_to_hex 192 168 $id$jd $o4`
+ host_mac=8000000000$o4
+
+ lrmac=00000000ff$id$jd
+ lrip=`ip_to_hex 192 168 $id$jd 254`
+
+ arp=${lrmac}${host_mac}08060001080006040002${host_mac}${host_ip}${lrmac}${lrip}
+
+ echo
+ echo
+ echo
+ hv=hv`vif_to_hv $d`
+ as $hv ovs-appctl netdev-dummy/receive vif$d $arp
+ #as $hv ovs-appctl ofproto/trace br-int in_port=$d $arp
+ #as $hv ovs-ofctl dump-flows br-int table=19
+
+ host_ip_pretty=192.168.$id$jd.$o4
+ host_mac_pretty=80:00:00:00:00:$o4
+ echo lrp$id$jd,$host_ip_pretty,$host_mac_pretty >> mac_bindings.expected
done
+ done
done
+ done
done
# Allow some time for packet forwarding.
# have static MAC bindings, so they go to the port we've designated as
# accepting "unknown" MACs.)
for is in 1 2 3; do
- for js in 1 2 3; do
- for ks in 1 2 3; do
- s=$is$js$ks
- smac=f00000000$s
- sip=`ip_to_hex 192 168 $is$js $ks`
- for id in 1 2 3; do
- for jd in 1 2 3; do
- if test $is$js = $id$jd; then
- continue
- fi
-
- # Send the packet.
- dmac=00000000ff$is$js
- # Calculate a 4th octet for the destination that is
- # unique per $s, avoids the .1 .2 .3 and .254 IP addresses
- # that have static MAC bindings, and fits in the range
- # 0-255.
- o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10`
- dip=`ip_to_hex 192 168 $id$jd $o4`
- test_ip $s $smac $dmac $sip $dip
-
- # Expect the packet egress.
- host_mac=8000000000$o4
- outport=${id}11
- out_lrp=$id$jd
- echo ${host_mac}00000000ff${out_lrp}08004500001c00000000"3f1101"00${sip}${dip}0035111100080000 | trim_zeros >> $outport.expected
- done
- done
+ for js in 1 2 3; do
+ for ks in 1 2 3; do
+ s=$is$js$ks
+ smac=f00000000$s
+ sip=`ip_to_hex 192 168 $is$js $ks`
+ for id in 1 2 3; do
+ for jd in 1 2 3; do
+ if test $is$js = $id$jd; then
+ continue
+ fi
+
+ # Send the packet.
+ dmac=00000000ff$is$js
+ # Calculate a 4th octet for the destination that is
+ # unique per $s, avoids the .1 .2 .3 and .254 IP addresses
+ # that have static MAC bindings, and fits in the range
+ # 0-255.
+ o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10`
+ dip=`ip_to_hex 192 168 $id$jd $o4`
+ test_ip $s $smac $dmac $sip $dip
+
+ # Expect the packet egress.
+ host_mac=8000000000$o4
+ outport=${id}11
+ out_lrp=$id$jd
+ echo ${host_mac}00000000ff${out_lrp}08004500001c00000000"3f1101"00${sip}${dip}0035111100080000 | trim_zeros >> $outport.expected
done
+ done
done
+ done
done
# Allow some time for packet forwarding.
for i in 1 2 3; do
for j in 1 2 3; do
for k in 1 2 3; do
- file=hv`vif_to_hv $i$j$k`/vif$i$j$k-tx.pcap
- echo $file
- $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i$j$k.packets
- sort $i$j$k.expected > expout
- AT_CHECK([sort $i$j$k.packets], [0], [expout])
- echo
+ file=hv`vif_to_hv $i$j$k`/vif$i$j$k-tx.pcap
+ echo $file
+ $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i$j$k.packets
+ sort $i$j$k.expected > expout
+ AT_CHECK([sort $i$j$k.packets], [0], [expout])
+ echo
done
done
done
])
# Gracefully terminate daemons
-for daemon in ovn-controller ovn-northd ovsdb-server; do
- ovs-appctl -t $daemon exit
-done
+OVN_CLEANUP([hv1], [hv2], [hv3])
+
AT_CLEANUP
# 3 hypervisors, one logical switch, 3 logical ports per hypervisor
# Turn on l2 port security on vifs vif[123]2
# Turn of l2 and l3 port security on vifs vif[123]3
# Make vif13, vif2[23], vif3[123] destinations for unknown MACs.
-ovn-nbctl lswitch-add lsw0
+ovn-nbctl ls-add lsw0
net_add n1
for i in 1 2 3; do
sim_add hv$i
as $hv ovs-appctl netdev-dummy/receive vif$inport $request
#as $hv ovs-appctl ofproto/trace br-int in_port=$inport $request
if test $drop != 1; then
- if test X$reply_ha == X; then
+ if test X$reply_ha = X; then
# Expect to receive the broadcast ARP on the other logical switch ports
# if no reply is expected.
local i j
done
done
-# Gracefully terminate daemons
-for sim in hv1 hv2 hv3; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2],[hv3])
AT_CLEANUP
ovn-nbctl lr-add R1
ovn-nbctl lr-add R2
-ovn-nbctl lswitch-add ls1
-ovn-nbctl lswitch-add ls2
+ovn-nbctl ls-add ls1
+ovn-nbctl ls-add ls2
# Connect ls1 to R1
-ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1
+ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
options:router-port=ls1 addresses=\"00:00:00:01:02:03\"
# Connect ls2 to R2
-ovn-nbctl lrp-add R2 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2
+ovn-nbctl lrp-add R2 ls2 00:00:00:01:02:04 172.16.1.1/24
ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
options:router-port=ls2 addresses=\"00:00:00:01:02:04\"
# Connect R1 to R2
-ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 R2_R1
-ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 R1_R2
+ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 peer=R2_R1
+ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 peer=R1_R2
-ovn-nbctl set Logical_Router R1 default_gw="20.0.0.2"
-ovn-nbctl set Logical_Router R2 default_gw="20.0.0.1"
+ovn-nbctl lr-route-add R1 "0.0.0.0/0" 20.0.0.2
+ovn-nbctl lr-route-add R2 "0.0.0.0/0" 20.0.0.1
# Create logical port ls1-lp1 in ls1
ovn-nbctl lsp-add ls1 ls1-lp1 \
echo $expected | trim_zeros > expout
AT_CHECK([cat received.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
+OVN_CLEANUP([hv1],[hv2])
+
+AT_CLEANUP
+
+
+AT_SETUP([ovn -- 1 HV, 1 LS, 2 lport/LS, 1 LR])
+AT_KEYWORDS([router-admin-state])
+AT_SKIP_IF([test $HAVE_PYTHON = no])
+ovn_start
+
+# Logical network:
+# One LR - R1 has switch ls1 with two subnets attached to it (191.168.1.0/24
+# and 172.16.1.0/24) connected to it.
+
+ovn-nbctl lr-add R1
+
+ovn-nbctl ls-add ls1
+
+# Connect ls1 to R1
+ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 172.16.1.1/24
+ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
+ options:router-port=ls1 addresses=\"00:00:00:01:02:03\"
+
+# Create logical port ls1-lp1 in ls1
+ovn-nbctl lsp-add ls1 ls1-lp1 \
+ -- lsp-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2"
+
+# Create logical port ls1-lp2 in ls1
+ovn-nbctl lsp-add ls1 ls1-lp2 \
+ -- lsp-set-addresses ls1-lp2 "f0:00:00:01:02:04 172.16.1.2"
+
+# Create one hypervisor and create OVS ports corresponding to logical ports.
+net_add n1
+
+sim_add hv1
+as hv1
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.1
+ovs-vsctl -- add-port br-int vif1 -- \
+ set interface vif1 external-ids:iface-id=ls1-lp1 \
+ options:tx_pcap=hv1/vif1-tx.pcap \
+ options:rxq_pcap=hv1/vif1-rx.pcap \
+ ofport-request=1
+
+ovs-vsctl -- add-port br-int vif2 -- \
+ set interface vif2 external-ids:iface-id=ls1-lp2 \
+ options:tx_pcap=hv1/vif2-tx.pcap \
+ options:rxq_pcap=hv1/vif2-rx.pcap \
+ ofport-request=1
+
+
+# Allow some time for ovn-northd and ovn-controller to catch up.
+# XXX This should be more systematic.
+sleep 1
+
+# Send ip packets between the two ports.
+ip_to_hex() {
+ printf "%02x%02x%02x%02x" "$@"
+}
+trim_zeros() {
+ sed 's/\(00\)\{1,\}$//'
+}
+
+# Packet to send.
+src_mac="f00000010203"
+dst_mac="000000010203"
+src_ip=`ip_to_hex 192 168 1 2`
+dst_ip=`ip_to_hex 172 16 1 2`
+packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000
+as hv1 ovs-appctl netdev-dummy/receive vif1 $packet
+
+
+echo "---------NB dump-----"
+ovn-nbctl show
+echo "---------------------"
+ovn-nbctl list logical_router
+echo "---------------------"
+ovn-nbctl list logical_router_port
+echo "---------------------"
+
+echo "---------SB dump-----"
+ovn-sbctl list datapath_binding
+echo "---------------------"
+ovn-sbctl list logical_flow
+echo "---------------------"
+
+echo "------ hv1 dump ----------"
+as hv1 ovs-ofctl dump-flows br-int
+
+
+#Disable router R1
+ovn-nbctl set Logical_Router R1 enabled=false
+
+echo "---------SB dump-----"
+ovn-sbctl list datapath_binding
+echo "---------------------"
+ovn-sbctl list logical_flow
+echo "---------------------"
+
+echo "------ hv1 dump ----------"
+as hv1 ovs-ofctl dump-flows br-int
+
+as hv1 ovs-appctl netdev-dummy/receive vif1 $packet
+
+# Packet to Expect
+expect_src_mac="000000010203"
+expect_dst_mac="f00000010204"
+expected=${expect_dst_mac}${expect_src_mac}08004500001c000000003f110100${src_ip}${dst_ip}0035111100080000
+
+$PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > received.packets
+echo $expected | trim_zeros > expout
+AT_CHECK([cat received.packets], [0], [expout])
+
+
+as hv1
+OVS_APP_EXIT_AND_WAIT([ovn-controller])
+OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
+OVS_APP_EXIT_AND_WAIT([ovsdb-server])
as ovn-sb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])
AT_CLEANUP
-AT_SETUP([ovn -- 1 HVs, 2 LSs, 1 lport/LS, 1 LR])
+AT_SETUP([ovn -- 1 HV, 2 LSs, 1 lport/LS, 1 LR])
AT_KEYWORDS([router-admin-state])
AT_SKIP_IF([test $HAVE_PYTHON = no])
ovn_start
ovn-nbctl lr-add R1
-ovn-nbctl lswitch-add ls1
-ovn-nbctl lswitch-add ls2
+ovn-nbctl ls-add ls1
+ovn-nbctl ls-add ls2
# Connect ls1 to R1
-ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1
+ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
options:router-port=ls1 addresses=\"00:00:00:01:02:03\"
# Connect ls2 to R1
-ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2
+ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:04 172.16.1.1/24
ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
options:router-port=ls2 addresses=\"00:00:00:01:02:04\"
echo "------ hv1 dump ----------"
as hv1 ovs-ofctl dump-flows br-int
-
#Disable router R1
ovn-nbctl set Logical_Router R1 enabled=false
echo "------ hv1 dump ----------"
as hv1 ovs-ofctl dump-flows br-int
+# Allow some time for the disabling of logical router R1 to propagate.
+# XXX This should be more systematic.
+sleep 1
+
as hv1 ovs-appctl netdev-dummy/receive vif1 $packet
# Packet to Expect
AT_CHECK([cat received.packets], [0], [expout])
-as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1])
AT_CLEANUP
ovn-nbctl lr-add R1
ovn-nbctl lr-add R2
-ovn-nbctl lswitch-add foo
-ovn-nbctl lswitch-add alice
-ovn-nbctl lswitch-add bob
+ovn-nbctl ls-add foo
+ovn-nbctl ls-add alice
+ovn-nbctl ls-add bob
# Connect foo to R1
-ovn-nbctl lrp-add R1 foo 00:00:00:01:02:03 192.168.1.1/24 rp-foo
+ovn-nbctl lrp-add R1 foo 00:00:00:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \
options:router-port=foo addresses=\"00:00:00:01:02:03\"
# Connect alice to R2
-ovn-nbctl lrp-add R2 alice 00:00:00:01:02:04 172.16.1.1/24 rp-alice
+ovn-nbctl lrp-add R2 alice 00:00:00:01:02:04 172.16.1.1/24
ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \
type=router options:router-port=alice addresses=\"00:00:00:01:02:04\"
# Connect bob to R2
-ovn-nbctl lrp-add R2 bob 00:00:00:01:02:05 172.16.2.1/24 rp-bob
+ovn-nbctl lrp-add R2 bob 00:00:00:01:02:05 172.16.2.1/24
ovn-nbctl lsp-add bob rp-bob -- set Logical_Switch_Port rp-bob type=router \
options:router-port=bob addresses=\"00:00:00:01:02:05\"
# Connect R1 to R2
-ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 R2_R1
-ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 R1_R2
+ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 peer=R2_R1
+ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 peer=R1_R2
#install static routes
ovn-nbctl lr-route-add R1 172.16.1.0/24 20.0.0.2
echo $expected | trim_zeros > expout
AT_CHECK([cat received1.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2])
AT_CLEANUP
AT_SETUP([ovn -- send gratuitous arp on localnet])
AT_KEYWORDS([ovn])
+AT_SKIP_IF([test $HAVE_PYTHON = no])
ovn_start
-ovn-nbctl lswitch-add lsw0
+ovn-nbctl ls-add lsw0
net_add n1
sim_add hv
as hv
AT_CHECK([ovs-vsctl del-port localvif1])
AT_CHECK([ovn-nbctl lsp-del ln_port])
-as hv
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv])
AT_CLEANUP
ovn-nbctl lr-add R2
ovn-nbctl lr-add R3
-ovn-nbctl lswitch-add foo
-ovn-nbctl lswitch-add alice
-ovn-nbctl lswitch-add bob
-ovn-nbctl lswitch-add join
+ovn-nbctl ls-add foo
+ovn-nbctl ls-add alice
+ovn-nbctl ls-add bob
+ovn-nbctl ls-add join
# Connect foo to R1
ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24
echo $expected | trim_zeros > expout
AT_CHECK([cat received1.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2])
AT_CLEANUP
-
AT_SETUP([ovn -- 2 HVs, 2 LRs connected via LS, gateway router])
AT_KEYWORDS([ovngatewayrouter])
AT_SKIP_IF([test $HAVE_PYTHON = no])
ovn-nbctl create Logical_Router name=R1
ovn-nbctl create Logical_Router name=R2 options:chassis="hv2"
-ovn-nbctl lswitch-add foo
-ovn-nbctl lswitch-add alice
-ovn-nbctl lswitch-add join
+ovn-nbctl ls-add foo
+ovn-nbctl ls-add alice
+ovn-nbctl ls-add join
# Connect foo to R1
ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24
echo $expected | trim_zeros > expout
AT_CHECK([cat received1.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
+# Delete the router and re-create it. Things should work as before.
+ovn-nbctl lr-del R2
+ovn-nbctl create Logical_Router name=R2 options:chassis="hv2"
+# Connect alice to R2
+ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24
+# Connect R2 to join
+ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \
+ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \
+R2 static_routes @lrt
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+# Wait for ovn-controller to catch up.
+sleep 1
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
+# Send the packet again.
+as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet
+$PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv2/vif1-tx.pcap | trim_zeros > received1.packets
+echo $expected | trim_zeros >> expout
+AT_CHECK([cat received1.packets], [0], [expout])
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2])
AT_CLEANUP
ovn-nbctl lr-add R1
-ovn-nbctl lswitch-add ls1
-ovn-nbctl lswitch-add ls2
+ovn-nbctl ls-add ls1
+ovn-nbctl ls-add ls2
# Connect ls1 to R1
ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:f1 192.168.1.1/24
AT_CHECK([cat received.packets], [0], [expout])
done
+OVN_CLEANUP([hv1])
+
+AT_CLEANUP
+
+# 1 hypervisor, 1 port
+# make sure that the port state is properly set to up and back down
+# when created and deleted.
+AT_SETUP([ovn -- port state up and down])
+AT_KEYWORDS([ovn])
+ovn_start
+
+ovn-nbctl ls-add ls1
+ovn-nbctl lsp-add ls1 lp1
+ovn-nbctl lsp-set-addresses lp1 unknown
+
+net_add n1
+sim_add hv1
+as hv1 ovs-vsctl add-br br-phys
+as hv1 ovn_attach n1 br-phys 192.168.0.1
+
+as hv1 ovs-vsctl add-port br-int vif1 -- set Interface vif1 external-ids:iface-id=lp1
+OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up lp1` = xup])
+
+as hv1 ovs-vsctl del-port br-int vif1
+OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up lp1` = xdown])
+
+OVN_CLEANUP([hv1])
+
+AT_CLEANUP
+
+AT_SETUP([ovn -- nd ])
+AT_KEYWORDS([ovn-nd])
+AT_SKIP_IF([test $HAVE_PYTHON = no])
+ovn_start
+
+#TODO: since patch port for IPv6 logical router port is not ready not,
+# so we are not going to test vifs on different lswitches cases. Try
+# to update for that once relevant stuff implemented.
+
+# In this test cases we create 1 lswitch, it has 2 VIF ports attached
+# with. NS packet we test, from one VIF for another VIF, will be replied
+# by local ovn-controller, but not by target VIF.
+
+# Create hypervisors and logical switch lsw0.
+ovn-nbctl ls-add lsw0
+net_add n1
+sim_add hv1
as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.2
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+# Add vif1 to hv1 and lsw0, turn on l2 port security on vif1.
+ovs-vsctl add-port br-int vif1 -- set Interface vif1 external-ids:iface-id=lp1 options:tx_pcap=hv1/vif1-tx.pcap options:rxq_pcap=hv1/vif1-rx.pcap ofport-request=1
+ovn-nbctl lsp-add lsw0 lp1
+ovn-nbctl lsp-set-addresses lp1 "fa:16:3e:94:05:98 192.168.0.3 fd81:ce49:a948:0:f816:3eff:fe94:598"
+ovn-nbctl lsp-set-port-security lp1 "fa:16:3e:94:05:98 192.168.0.3 fd81:ce49:a948:0:f816:3eff:fe94:598"
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+# Add vif2 to hv1 and lsw0, turn on l2 port security on vif2.
+ovs-vsctl add-port br-int vif2 -- set Interface vif2 external-ids:iface-id=lp2 options:tx_pcap=hv1/vif2-tx.pcap options:rxq_pcap=hv1/vif2-rx.pcap ofport-request=2
+ovn-nbctl lsp-add lsw0 lp2
+ovn-nbctl lsp-set-addresses lp2 "fa:16:3e:a1:f9:ae 192.168.0.4 fd81:ce49:a948:0:f816:3eff:fea1:f9ae"
+ovn-nbctl lsp-set-port-security lp2 "fa:16:3e:a1:f9:ae 192.168.0.4 fd81:ce49:a948:0:f816:3eff:fea1:f9ae"
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
+# Add ACL rule for ICMPv6 on lsw0
+ovn-nbctl acl-add lsw0 from-lport 1002 'ip6 && icmp6' allow-related
+ovn-nbctl acl-add lsw0 to-lport 1002 'outport == "lp1" && ip6 && icmp6' allow-related
+ovn-nbctl acl-add lsw0 to-lport 1002 'outport == "lp2" && ip6 && icmp6' allow-related
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+# Allow some time for ovn-northd and ovn-controller to catch up.
+# XXX This should be more systematic.
+sleep 1
+
+# Given the name of a logical port, prints the name of the hypervisor
+# on which it is located.
+vif_to_hv() {
+ echo hv1${1%?}
+}
+trim_zeros() {
+ sed 's/\(00\)\{1,\}$//'
+}
+for i in 1 2; do
+ : > $i.expected
+done
+
+# Complete Neighbor Solicitation packet and Neighbor Advertisement packet
+# vif1 -> NS -> vif2. vif1 <- NA <- ovn-controller.
+# vif2 will not receive NS packet, since ovn-controller will reply for it.
+ns_packet=3333ffa1f9aefa163e94059886dd6000000000203afffd81ce49a9480000f8163efffe940598fd81ce49a9480000f8163efffea1f9ae8700e01160000000fd81ce49a9480000f8163efffea1f9ae0101fa163e940598
+na_packet=fa163e940598fa163ea1f9ae86dd6000000000203afffd81ce49a9480000f8163efffea1f9aefd81ce49a9480000f8163efffe9405988800e9ed60000000fd81ce49a9480000f8163efffea1f9ae0201fa163ea1f9ae
+
+as hv1 ovs-appctl netdev-dummy/receive vif1 $ns_packet
+echo $na_packet | trim_zeros >> 1.expected
+
+sleep 1
+
+echo "------ hv1 dump ------"
+as hv1 ovs-vsctl show
+as hv1 ovs-ofctl -O OpenFlow13 show br-int
+as hv1 ovs-ofctl -O OpenFlow13 dump-flows br-int
+
+for i in 1 2; do
+ file=hv1/vif$i-tx.pcap
+ echo $file
+ $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i.packets
+ cat $i.expected > expout
+ AT_CHECK([cat $i.packets], [0], [expout])
+done
+
+OVN_CLEANUP([hv1])
+
+AT_CLEANUP
+
+AT_SETUP([ovn -- address sets modification/removal smoke test])
+AT_KEYWORDS([ovn-addr])
+ovn_start
+
+net_add n1
+
+sim_add hv1
+as hv1
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.1
+
+row=`ovn-nbctl create Address_Set name=set1 addresses=\"1.1.1.1\"`
+ovn-nbctl set Address_Set $row name=set1 addresses=\"1.1.1.1,1.1.1.2\"
+ovn-nbctl destroy Address_Set $row
+
+sleep 1
+
+# A bug previously existed in the address set support code
+# that caused ovn-controller to crash after an address set
+# was updated and then removed. This test case ensures
+# that ovn-controller is at least still running after
+# creating, updating, and deleting an address set.
+AT_CHECK([ovs-appctl -t ovn-controller version], [0], [ignore])
+
+OVN_CLEANUP([hv1])
AT_CLEANUP
projects / cascardo / ovs.git / blobdiff