"abc\u0020def" => "abc def"
" => error("Input ends inside quoted string.")dnl "
+$foo $bar $baz $quuxquuxquux $_abcd_ $a.b.c.d $a123_.456
+$1 => error("`$' must be followed by a valid identifier.") 1
+
a/*b*/c => a c
a//b c => a
a/**/b => a b
192.168.0.0/255.0.0.0 => error("Value contains unmasked 1-bits.")
192.168.0.0/32
192.168.0.0/255.255.255.255 => 192.168.0.0/32
+1.2.3.4:5 => 1.2.3.4 : 5
::
::1
00:01:02:03:04:x => error("Invalid numeric constant.")
# Test that operators are tokenized as expected, even without white space.
-(){}[[]]==!=<<=>>=!&&||..,;=<->-- => ( ) { } [[ ]] == != < <= > >= ! && || .. , ; = <-> --
+(){}[[]]==!=<<=>>=!&&||..,;=<->--: => ( ) { } [[ ]] == != < <= > >= ! && || .. , ; = <-> -- :
& => error("`&' is only valid as part of `&&'.")
| => error("`|' is only valid as part of `||'.")
- => error("`-' is only valid as part of `--'.")
123 == 123 => Syntax error at `123' expecting field name.
+$name => Syntax error at `$name' expecting address set name.
+
123 == xyzzy => Syntax error at `xyzzy' expecting field name.
xyzzy == 1 => Syntax error at `xyzzy' expecting field name.
1 == eth.type == 2 => Range expressions must have the form `x < field < y' or `x > field > y', with each `<' optionally replaced by `<=' or `>' by `>=').
eth.dst[40] x => Extra tokens at end of input.
+
+ip4.src == {1.2.3.4, $set1, $unknownset} => Syntax error at `$unknownset' expecting address set name.
+eth.src == {$set3, badmac, 00:00:00:00:00:01} => Syntax error at `badmac' expecting constant.
]])
sed 's/ =>.*//' test-cases.txt > input.txt
sed 's/.* => //' test-cases.txt > expout
expr_to_flow () {
echo "$1" | ovstest test-ovn expr-to-flows | sort
}
-AT_CHECK([expr_to_flow 'inport == "eth0"'], [0], [reg6=0x5
+AT_CHECK([expr_to_flow 'inport == "eth0"'], [0], [reg14=0x5
])
-AT_CHECK([expr_to_flow 'inport == "eth1"'], [0], [reg6=0x6
+AT_CHECK([expr_to_flow 'inport == "eth1"'], [0], [reg14=0x6
])
AT_CHECK([expr_to_flow 'inport == "eth2"'], [0], [(no flows)
])
AT_CHECK([expr_to_flow 'inport == "eth0" && ip'], [0], [dnl
-ip,reg6=0x5
-ipv6,reg6=0x5
+ip,reg14=0x5
+ipv6,reg14=0x5
])
AT_CHECK([expr_to_flow 'inport == "eth1" && ip'], [0], [dnl
-ip,reg6=0x6
-ipv6,reg6=0x6
+ip,reg14=0x6
+ipv6,reg14=0x6
])
AT_CHECK([expr_to_flow 'inport == "eth2" && ip'], [0], [(no flows)
])
AT_CHECK([expr_to_flow 'inport == {"eth0", "eth1", "eth2", "LOCAL"}'], [0],
-[reg6=0x5
-reg6=0x6
-reg6=0xfffe
+[reg14=0x5
+reg14=0x6
+reg14=0xfffe
])
AT_CHECK([expr_to_flow 'inport == {"eth0", "eth1", "eth2"} && ip'], [0], [dnl
-ip,reg6=0x5
-ip,reg6=0x6
-ipv6,reg6=0x5
-ipv6,reg6=0x6
+ip,reg14=0x5
+ip,reg14=0x6
+ipv6,reg14=0x5
+ipv6,reg14=0x6
])
AT_CHECK([expr_to_flow 'inport == "eth0" && inport == "eth1"'], [0], [dnl
(no flows)
])
AT_CLEANUP
+AT_SETUP([ovn -- converting expressions to flows -- address sets])
+expr_to_flow () {
+ echo "$1" | ovstest test-ovn expr-to-flows | sort
+}
+AT_CHECK([expr_to_flow 'ip4.src == {10.0.0.1, 10.0.0.2, 10.0.0.3}'], [0], [dnl
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+])
+AT_CHECK([expr_to_flow 'ip4.src == $set1'], [0], [dnl
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+])
+AT_CHECK([expr_to_flow 'ip4.src == {1.2.3.4, $set1}'], [0], [dnl
+ip,nw_src=1.2.3.4
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+])
+AT_CHECK([expr_to_flow 'ip4.src == {1.2.0.0/20, 5.5.5.0/24, $set1}'], [0], [dnl
+ip,nw_src=1.2.0.0/20
+ip,nw_src=10.0.0.1
+ip,nw_src=10.0.0.2
+ip,nw_src=10.0.0.3
+ip,nw_src=5.5.5.0/24
+])
+AT_CHECK([expr_to_flow 'ip6.src == {::1, ::2, ::3}'], [0], [dnl
+ipv6,ipv6_src=::1
+ipv6,ipv6_src=::2
+ipv6,ipv6_src=::3
+])
+AT_CHECK([expr_to_flow 'ip6.src == {::1, $set2, ::4}'], [0], [dnl
+ipv6,ipv6_src=::1
+ipv6,ipv6_src=::2
+ipv6,ipv6_src=::3
+ipv6,ipv6_src=::4
+])
+AT_CHECK([expr_to_flow 'eth.src == {00:00:00:00:00:01, 00:00:00:00:00:02, 00:00:00:00:00:03}'], [0], [dnl
+dl_src=00:00:00:00:00:01
+dl_src=00:00:00:00:00:02
+dl_src=00:00:00:00:00:03
+])
+AT_CHECK([expr_to_flow 'eth.src == {$set3}'], [0], [dnl
+dl_src=00:00:00:00:00:01
+dl_src=00:00:00:00:00:02
+dl_src=00:00:00:00:00:03
+])
+AT_CHECK([expr_to_flow 'eth.src == {00:00:00:00:00:01, $set3, ba:be:be:ef:de:ad, $set3}'], [0], [dnl
+dl_src=00:00:00:00:00:01
+dl_src=00:00:00:00:00:02
+dl_src=00:00:00:00:00:03
+dl_src=ba:be:be:ef:de:ad
+])
+AT_CLEANUP
+
AT_SETUP([ovn -- action parsing])
dnl Text before => is input, text after => is expected output.
AT_DATA([test-cases.txt], [[
eth.dst[40] = 1; => actions=set_field:01:00:00:00:00:00/01:00:00:00:00:00->eth_dst, prereqs=1
vlan.pcp = 2; => actions=set_field:0x4000/0xe000->vlan_tci, prereqs=vlan.tci[12]
vlan.tci[13..15] = 2; => actions=set_field:0x4000/0xe000->vlan_tci, prereqs=1
-inport = ""; => actions=set_field:0->reg6,set_field:0->in_port, prereqs=1
+inport = ""; => actions=set_field:0->reg14,set_field:0->in_port, prereqs=1
ip.ttl = 4; => actions=set_field:4->nw_ttl, prereqs=eth.type == 0x800 || eth.type == 0x86dd
-outport="eth0"; next; outport="LOCAL"; next; => actions=set_field:0x5->reg7,resubmit(,27),set_field:0xfffe->reg7,resubmit(,27), prereqs=1
+outport="eth0"; next; outport="LOCAL"; next; => actions=set_field:0x5->reg15,resubmit(,27),set_field:0xfffe->reg15,resubmit(,27), prereqs=1
inport[1] = 1; => Cannot select subfield of string field inport.
ip.proto[1] = 1; => Cannot select subfield of nominal field ip.proto.
reg0 = reg1; => actions=move:OXM_OF_PKT_REG0[0..31]->OXM_OF_PKT_REG0[32..63], prereqs=1
vlan.pcp = reg0[0..2]; => actions=move:OXM_OF_PKT_REG0[32..34]->NXM_OF_VLAN_TCI[13..15], prereqs=vlan.tci[12]
reg0[10] = vlan.pcp[1]; => actions=move:NXM_OF_VLAN_TCI[14]->OXM_OF_PKT_REG0[42], prereqs=vlan.tci[12]
-outport = inport; => actions=move:NXM_NX_REG6[]->NXM_NX_REG7[], prereqs=1
+outport = inport; => actions=move:NXM_NX_REG14[]->NXM_NX_REG15[], prereqs=1
reg0[0] = vlan.present; => Predicate symbol vlan.present used where lvalue required.
reg0 = reg1[0..10]; => Can't assign 11-bit value to 32-bit destination.
reg0 <-> reg1; => actions=push:OXM_OF_PKT_REG0[0..31],push:OXM_OF_PKT_REG0[32..63],pop:OXM_OF_PKT_REG0[0..31],pop:OXM_OF_PKT_REG0[32..63], prereqs=1
vlan.pcp <-> reg0[0..2]; => actions=push:OXM_OF_PKT_REG0[32..34],push:NXM_OF_VLAN_TCI[13..15],pop:OXM_OF_PKT_REG0[32..34],pop:NXM_OF_VLAN_TCI[13..15], prereqs=vlan.tci[12]
reg0[10] <-> vlan.pcp[1]; => actions=push:NXM_OF_VLAN_TCI[14],push:OXM_OF_PKT_REG0[42],pop:NXM_OF_VLAN_TCI[14],pop:OXM_OF_PKT_REG0[42], prereqs=vlan.tci[12]
-outport <-> inport; => actions=push:NXM_NX_REG6[],push:NXM_NX_REG7[],pop:NXM_NX_REG6[],pop:NXM_NX_REG7[], prereqs=1
+outport <-> inport; => actions=push:NXM_NX_REG14[],push:NXM_NX_REG15[],pop:NXM_NX_REG14[],pop:NXM_NX_REG15[], prereqs=1
reg0[0] <-> vlan.present; => Predicate symbol vlan.present used where lvalue required.
reg0 <-> reg1[0..10]; => Can't exchange 32-bit field with 11-bit field.
ip.ttl--; => actions=dec_ttl, prereqs=ip
ip.ttl => Syntax error at end of input expecting `--'.
+# load balancing.
+ct_lb; => actions=ct(table=27,zone=NXM_NX_REG13[0..15],nat), prereqs=ip
+ct_lb(); => Syntax error at `)' expecting IPv4 address.
+ct_lb(192.168.1.2:80, 192.168.1.3:80); => actions=group:1, prereqs=ip
+ct_lb(192.168.1.2, 192.168.1.3, ); => actions=group:2, prereqs=ip
+ct_lb(192.168.1.2:); => Syntax error at `)' expecting port number.
+ct_lb(192.168.1.2:123456); => Syntax error at `123456' expecting port number.
+ct_lb(foo); => Syntax error at `foo' expecting IPv4 address.
+
# conntrack
-ct_next; => actions=ct(table=27,zone=NXM_NX_REG5[0..15]), prereqs=ip
-ct_commit; => actions=ct(commit,zone=NXM_NX_REG5[0..15]), prereqs=ip
-ct_commit(); => actions=ct(commit,zone=NXM_NX_REG5[0..15]), prereqs=ip
-ct_commit(ct_mark=1); => actions=ct(commit,zone=NXM_NX_REG5[0..15],exec(set_field:0x1->ct_mark)), prereqs=ip
-ct_commit(ct_mark=1/1); => actions=ct(commit,zone=NXM_NX_REG5[0..15],exec(set_field:0x1/0x1->ct_mark)), prereqs=ip
-ct_commit(ct_label=1); => actions=ct(commit,zone=NXM_NX_REG5[0..15],exec(set_field:0x1->ct_label)), prereqs=ip
-ct_commit(ct_label=1/1); => actions=ct(commit,zone=NXM_NX_REG5[0..15],exec(set_field:0x1/0x1->ct_label)), prereqs=ip
-ct_commit(ct_mark=1, ct_label=2); => actions=ct(commit,zone=NXM_NX_REG5[0..15],exec(set_field:0x1->ct_mark,set_field:0x2->ct_label)), prereqs=ip
+ct_next; => actions=ct(table=27,zone=NXM_NX_REG13[0..15]), prereqs=ip
+ct_commit; => actions=ct(commit,zone=NXM_NX_REG13[0..15]), prereqs=ip
+ct_commit(); => actions=ct(commit,zone=NXM_NX_REG13[0..15]), prereqs=ip
+ct_commit(ct_mark=1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1->ct_mark)), prereqs=ip
+ct_commit(ct_mark=1/1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1/0x1->ct_mark)), prereqs=ip
+ct_commit(ct_label=1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1->ct_label)), prereqs=ip
+ct_commit(ct_label=1/1); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1/0x1->ct_label)), prereqs=ip
+ct_commit(ct_label=0x01020304050607080910111213141516); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1020304050607080910111213141516->ct_label)), prereqs=ip
+ct_commit(ct_label=0x181716151413121110090807060504030201); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x16151413121110090807060504030201->ct_label)), prereqs=ip
+ct_commit(ct_label=0x01000000000000000000000000000000/0x01000000000000000000000000000000); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1000000000000000000000000000000/0x1000000000000000000000000000000->ct_label)), prereqs=ip
+ct_commit(ct_label=18446744073709551615); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0xffffffffffffffff->ct_label)), prereqs=ip
+ct_commit(ct_label=18446744073709551616); => Decimal constants must be less than 2**64.
+ct_commit(ct_mark=1, ct_label=2); => actions=ct(commit,zone=NXM_NX_REG13[0..15],exec(set_field:0x1->ct_mark,set_field:0x2->ct_label)), prereqs=ip
# dnat
-ct_dnat; => actions=ct(table=27,zone=NXM_NX_REG3[0..15],nat), prereqs=ip
-ct_dnat(192.168.1.2); => actions=ct(commit,table=27,zone=NXM_NX_REG3[0..15],nat(dst=192.168.1.2)), prereqs=ip
+ct_dnat; => actions=ct(table=27,zone=NXM_NX_REG11[0..15],nat), prereqs=ip
+ct_dnat(192.168.1.2); => actions=ct(commit,table=27,zone=NXM_NX_REG11[0..15],nat(dst=192.168.1.2)), prereqs=ip
ct_dnat(192.168.1.2, 192.168.1.3); => Syntax error at `,' expecting `)'.
ct_dnat(foo); => Syntax error at `foo' invalid ip.
ct_dnat(foo, bar); => Syntax error at `foo' invalid ip.
ct_dnat(); => Syntax error at `)' invalid ip.
# snat
-ct_snat; => actions=ct(zone=NXM_NX_REG4[0..15],nat), prereqs=ip
-ct_snat(192.168.1.2); => actions=ct(commit,table=27,zone=NXM_NX_REG4[0..15],nat(src=192.168.1.2)), prereqs=ip
+ct_snat; => actions=ct(zone=NXM_NX_REG12[0..15],nat), prereqs=ip
+ct_snat(192.168.1.2); => actions=ct(commit,table=27,zone=NXM_NX_REG12[0..15],nat(src=192.168.1.2)), prereqs=ip
ct_snat(192.168.1.2, 192.168.1.3); => Syntax error at `,' expecting `)'.
ct_snat(foo); => Syntax error at `foo' invalid ip.
ct_snat(foo, bar); => Syntax error at `foo' invalid ip.
# get_arp
get_arp(outport, ip4.dst); => actions=push:NXM_NX_REG0[],push:NXM_OF_IP_DST[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[], prereqs=eth.type == 0x800
-get_arp(inport, reg0); => actions=push:NXM_NX_REG7[],push:NXM_NX_REG0[],push:OXM_OF_PKT_REG0[32..63],push:NXM_NX_REG6[],pop:NXM_NX_REG7[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[],pop:NXM_NX_REG7[], prereqs=1
+get_arp(inport, reg0); => actions=push:NXM_NX_REG15[],push:NXM_NX_REG0[],push:OXM_OF_PKT_REG0[32..63],push:NXM_NX_REG14[],pop:NXM_NX_REG15[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[],pop:NXM_NX_REG15[], prereqs=1
get_arp; => Syntax error at `;' expecting `('.
get_arp(); => Syntax error at `)' expecting field name.
get_arp(inport); => Syntax error at `)' expecting `,'.
reg1[0] = put_dhcp_opts(offerip=1.2.3.4, domain=1.2.3.4); => DHCP option domain requires string value.
# na
-na { eth.src = 12:34:56:78:9a:bc; nd.tll = 12:34:56:78:9a:bc; outport = inport; inport = ""; /* Allow sending out inport. */ output; }; => actions=controller(userdata=00.00.00.03.00.00.00.00.00.19.00.10.80.00.08.06.12.34.56.78.9a.bc.00.00.00.19.00.10.80.00.42.06.12.34.56.78.9a.bc.00.00.ff.ff.00.18.00.00.23.20.00.06.00.20.00.00.00.00.00.01.0c.04.00.01.0e.04.00.19.00.10.00.01.0c.04.00.00.00.00.00.00.00.00.00.19.00.10.00.00.00.02.00.00.00.00.00.00.00.00.ff.ff.00.10.00.00.23.20.00.0e.ff.f8.40.00.00.00), prereqs=nd
+na { eth.src = 12:34:56:78:9a:bc; nd.tll = 12:34:56:78:9a:bc; outport = inport; inport = ""; /* Allow sending out inport. */ output; }; => actions=controller(userdata=00.00.00.03.00.00.00.00.00.19.00.10.80.00.08.06.12.34.56.78.9a.bc.00.00.00.19.00.10.80.00.42.06.12.34.56.78.9a.bc.00.00.ff.ff.00.18.00.00.23.20.00.06.00.20.00.00.00.00.00.01.1c.04.00.01.1e.04.00.19.00.10.00.01.1c.04.00.00.00.00.00.00.00.00.00.19.00.10.00.00.00.02.00.00.00.00.00.00.00.00.ff.ff.00.10.00.00.23.20.00.0e.ff.f8.40.00.00.00), prereqs=nd
# Contradictionary prerequisites (allowed but not useful):
ip4.src = ip6.src[0..31]; => actions=move:NXM_NX_IPV6_SRC[0..31]->NXM_OF_IP_SRC[], prereqs=eth.type == 0x800 && eth.type == 0x86dd
ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1234' drop
ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1235 && inport == "lp11"' drop
ovn-nbctl acl-add lsw0 to-lport 1000 'eth.type == 0x1236 && outport == "lp33"' drop
+ovn-nbctl create Address_Set name=set1 addresses=\"f0:00:00:00:00:11\",\"f0:00:00:00:00:21\",\"f0:00:00:00:00:31\"
+ovn-nbctl acl-add lsw0 to-lport 1000 'eth.type == 0x1237 && eth.src == $set1 && outport == "lp33"' drop
# Pre-populate the hypervisors' ARP tables so that we don't lose any
# packets for ARP resolution (native tunneling doesn't queue packets
if test $d != $s && test $s != 11; then acl2=$d; else acl2=; fi
if test $d != $s && test $d != 33; then acl3=$d; else acl3=; fi
+ if test $d = $s || (test $js = 1 && test $d = 33); then
+ # Source of 11, 21, or 31 and dest of 33 should be dropped
+ # due to the 4th ACL that uses address_set(set1).
+ acl4=
+ else
+ acl4=$d
+ fi
test_packet $s f000000000$d f000000000$s 1234 #7, acl1
test_packet $s f000000000$d f000000000$s 1235 $acl2 #7, acl2
test_packet $s f000000000$d f000000000$s 1236 $acl3 #7, acl3
+ test_packet $s f000000000$d f000000000$s 1237 $acl4 #7, acl4
test_packet $s f000000000$d f00000000055 810000091234 #4
test_packet $s f000000000$d 0100000000$s $s$d #5
done
done
-# Gracefully terminate daemons
-for sim in hv1 hv2 hv3; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2],[hv3])
AT_CLEANUP
done
done
-# Gracefully terminate daemons
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
+OVN_CLEANUP([hv1],[hv2])
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
AT_CLEANUP
AT_SETUP([ovn -- vtep: 3 HVs, 1 VIFs/HV, 1 GW, 1 LS])
done
# Gracefully terminate daemons
-as vtep
-OVS_APP_EXIT_AND_WAIT([ovn-controller-vtep])
-OVS_APP_EXIT_AND_WAIT([ovs-vtep])
-
-as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-
-as hv2
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
+OVN_CLEANUP([hv1],[hv2],[vtep])
+OVN_CLEANUP_VSWITCH([hv3])
-for sim in hv1 hv2 hv3 vtep main; do
- as $sim
- for daemon in ovs-vswitchd ovsdb-server; do
- OVS_APP_EXIT_AND_WAIT([$daemon])
- done
-done
AT_CLEANUP
# Similar test to "hardware GW"
ovn-nbctl lsp-add lsw0 lp-gw
ovn-nbctl lsp-set-type lp-gw l2gateway
-ovn-nbctl lsp-set-options lp-gw network_name=physnet1
+ovn-nbctl lsp-set-options lp-gw network_name=physnet1 l2gateway-chassis=hv_gw
ovn-nbctl lsp-set-addresses lp-gw unknown
net_add n1 # Network to connect hv1, hv2, and gw
net_attach n2 br-phys2
ovs-vsctl set open . external_ids:ovn-bridge-mappings="physnet1:br-phys2"
-# Bind our gateway port to the hv_gw chassis
-ovn-sbctl lport-bind lp-gw hv_gw
-
# Add hv3 on the other side of the GW
sim_add hv3
as hv3
ovn-nbctl lr-add lr0
for i in 1 2 3; do
for j in 1 2 3; do
- ovn-nbctl lrp-add lr0 lrp$i$j 00:00:00:00:ff:$i$j \
- 192.168.$i$j.254/24 lrp$i$j-attachment
+ ovn-nbctl lrp-add lr0 lrp$i$j 00:00:00:00:ff:$i$j 192.168.$i$j.254/24
ovn-nbctl \
-- lsp-add ls$i lrp$i$j-attachment \
-- set Logical_Switch_Port lrp$i$j-attachment type=router \
])
# Gracefully terminate daemons
-for daemon in ovn-controller ovn-northd ovsdb-server; do
- ovs-appctl -t $daemon exit
-done
+OVN_CLEANUP([hv1], [hv2], [hv3])
+
AT_CLEANUP
# 3 hypervisors, one logical switch, 3 logical ports per hypervisor
as $hv ovs-appctl netdev-dummy/receive vif$inport $request
#as $hv ovs-appctl ofproto/trace br-int in_port=$inport $request
if test $drop != 1; then
- if test X$reply_ha == X; then
+ if test X$reply_ha = X; then
# Expect to receive the broadcast ARP on the other logical switch ports
# if no reply is expected.
local i j
done
done
-# Gracefully terminate daemons
-for sim in hv1 hv2 hv3; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2],[hv3])
AT_CLEANUP
ovn-nbctl ls-add ls2
# Connect ls1 to R1
-ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1
+ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
options:router-port=ls1 addresses=\"00:00:00:01:02:03\"
# Connect ls2 to R2
-ovn-nbctl lrp-add R2 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2
+ovn-nbctl lrp-add R2 ls2 00:00:00:01:02:04 172.16.1.1/24
ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
options:router-port=ls2 addresses=\"00:00:00:01:02:04\"
# Connect R1 to R2
-ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 R2_R1
-ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 R1_R2
+ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 peer=R2_R1
+ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 peer=R1_R2
-ovn-nbctl set Logical_Router R1 default_gw="20.0.0.2"
-ovn-nbctl set Logical_Router R2 default_gw="20.0.0.1"
+ovn-nbctl lr-route-add R1 "0.0.0.0/0" 20.0.0.2
+ovn-nbctl lr-route-add R2 "0.0.0.0/0" 20.0.0.1
# Create logical port ls1-lp1 in ls1
ovn-nbctl lsp-add ls1 ls1-lp1 \
echo $expected | trim_zeros > expout
AT_CHECK([cat received.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
+OVN_CLEANUP([hv1],[hv2])
+
+AT_CLEANUP
+
+
+AT_SETUP([ovn -- 1 HV, 1 LS, 2 lport/LS, 1 LR])
+AT_KEYWORDS([router-admin-state])
+AT_SKIP_IF([test $HAVE_PYTHON = no])
+ovn_start
+
+# Logical network:
+# One LR - R1 has switch ls1 with two subnets attached to it (191.168.1.0/24
+# and 172.16.1.0/24) connected to it.
+
+ovn-nbctl lr-add R1
+
+ovn-nbctl ls-add ls1
+
+# Connect ls1 to R1
+ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 172.16.1.1/24
+ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
+ options:router-port=ls1 addresses=\"00:00:00:01:02:03\"
+
+# Create logical port ls1-lp1 in ls1
+ovn-nbctl lsp-add ls1 ls1-lp1 \
+ -- lsp-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2"
+
+# Create logical port ls1-lp2 in ls1
+ovn-nbctl lsp-add ls1 ls1-lp2 \
+ -- lsp-set-addresses ls1-lp2 "f0:00:00:01:02:04 172.16.1.2"
+
+# Create one hypervisor and create OVS ports corresponding to logical ports.
+net_add n1
+
+sim_add hv1
+as hv1
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.1
+ovs-vsctl -- add-port br-int vif1 -- \
+ set interface vif1 external-ids:iface-id=ls1-lp1 \
+ options:tx_pcap=hv1/vif1-tx.pcap \
+ options:rxq_pcap=hv1/vif1-rx.pcap \
+ ofport-request=1
+
+ovs-vsctl -- add-port br-int vif2 -- \
+ set interface vif2 external-ids:iface-id=ls1-lp2 \
+ options:tx_pcap=hv1/vif2-tx.pcap \
+ options:rxq_pcap=hv1/vif2-rx.pcap \
+ ofport-request=1
+
+
+# Allow some time for ovn-northd and ovn-controller to catch up.
+# XXX This should be more systematic.
+sleep 1
+
+# Send ip packets between the two ports.
+ip_to_hex() {
+ printf "%02x%02x%02x%02x" "$@"
+}
+trim_zeros() {
+ sed 's/\(00\)\{1,\}$//'
+}
+
+# Packet to send.
+src_mac="f00000010203"
+dst_mac="000000010203"
+src_ip=`ip_to_hex 192 168 1 2`
+dst_ip=`ip_to_hex 172 16 1 2`
+packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000
+as hv1 ovs-appctl netdev-dummy/receive vif1 $packet
+
+
+echo "---------NB dump-----"
+ovn-nbctl show
+echo "---------------------"
+ovn-nbctl list logical_router
+echo "---------------------"
+ovn-nbctl list logical_router_port
+echo "---------------------"
+
+echo "---------SB dump-----"
+ovn-sbctl list datapath_binding
+echo "---------------------"
+ovn-sbctl list logical_flow
+echo "---------------------"
+
+echo "------ hv1 dump ----------"
+as hv1 ovs-ofctl dump-flows br-int
+
+
+#Disable router R1
+ovn-nbctl set Logical_Router R1 enabled=false
+
+echo "---------SB dump-----"
+ovn-sbctl list datapath_binding
+echo "---------------------"
+ovn-sbctl list logical_flow
+echo "---------------------"
+
+echo "------ hv1 dump ----------"
+as hv1 ovs-ofctl dump-flows br-int
+
+as hv1 ovs-appctl netdev-dummy/receive vif1 $packet
+
+# Packet to Expect
+expect_src_mac="000000010203"
+expect_dst_mac="f00000010204"
+expected=${expect_dst_mac}${expect_src_mac}08004500001c000000003f110100${src_ip}${dst_ip}0035111100080000
+
+$PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > received.packets
+echo $expected | trim_zeros > expout
+AT_CHECK([cat received.packets], [0], [expout])
+
+
+as hv1
+OVS_APP_EXIT_AND_WAIT([ovn-controller])
+OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
+OVS_APP_EXIT_AND_WAIT([ovsdb-server])
as ovn-sb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])
AT_CLEANUP
-AT_SETUP([ovn -- 1 HVs, 2 LSs, 1 lport/LS, 1 LR])
+AT_SETUP([ovn -- 1 HV, 2 LSs, 1 lport/LS, 1 LR])
AT_KEYWORDS([router-admin-state])
AT_SKIP_IF([test $HAVE_PYTHON = no])
ovn_start
ovn-nbctl ls-add ls2
# Connect ls1 to R1
-ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1
+ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
options:router-port=ls1 addresses=\"00:00:00:01:02:03\"
# Connect ls2 to R1
-ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2
+ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:04 172.16.1.1/24
ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
options:router-port=ls2 addresses=\"00:00:00:01:02:04\"
echo "------ hv1 dump ----------"
as hv1 ovs-ofctl dump-flows br-int
-
#Disable router R1
ovn-nbctl set Logical_Router R1 enabled=false
AT_CHECK([cat received.packets], [0], [expout])
-as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1])
AT_CLEANUP
ovn-nbctl ls-add bob
# Connect foo to R1
-ovn-nbctl lrp-add R1 foo 00:00:00:01:02:03 192.168.1.1/24 rp-foo
+ovn-nbctl lrp-add R1 foo 00:00:00:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \
options:router-port=foo addresses=\"00:00:00:01:02:03\"
# Connect alice to R2
-ovn-nbctl lrp-add R2 alice 00:00:00:01:02:04 172.16.1.1/24 rp-alice
+ovn-nbctl lrp-add R2 alice 00:00:00:01:02:04 172.16.1.1/24
ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \
type=router options:router-port=alice addresses=\"00:00:00:01:02:04\"
# Connect bob to R2
-ovn-nbctl lrp-add R2 bob 00:00:00:01:02:05 172.16.2.1/24 rp-bob
+ovn-nbctl lrp-add R2 bob 00:00:00:01:02:05 172.16.2.1/24
ovn-nbctl lsp-add bob rp-bob -- set Logical_Switch_Port rp-bob type=router \
options:router-port=bob addresses=\"00:00:00:01:02:05\"
# Connect R1 to R2
-ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 R2_R1
-ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 R1_R2
+ovn-nbctl lrp-add R1 R1_R2 00:00:00:02:03:04 20.0.0.1/24 peer=R2_R1
+ovn-nbctl lrp-add R2 R2_R1 00:00:00:02:03:05 20.0.0.2/24 peer=R1_R2
#install static routes
ovn-nbctl lr-route-add R1 172.16.1.0/24 20.0.0.2
echo $expected | trim_zeros > expout
AT_CHECK([cat received1.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2])
AT_CLEANUP
AT_SETUP([ovn -- send gratuitous arp on localnet])
AT_KEYWORDS([ovn])
+AT_SKIP_IF([test $HAVE_PYTHON = no])
ovn_start
ovn-nbctl ls-add lsw0
net_add n1
AT_CHECK([ovs-vsctl del-port localvif1])
AT_CHECK([ovn-nbctl lsp-del ln_port])
-as hv
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv])
AT_CLEANUP
echo $expected | trim_zeros > expout
AT_CHECK([cat received1.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2])
AT_CLEANUP
echo $expected | trim_zeros > expout
AT_CHECK([cat received1.packets], [0], [expout])
-for sim in hv1 hv2; do
- as $sim
- OVS_APP_EXIT_AND_WAIT([ovn-controller])
- OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
- OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-done
+# Delete the router and re-create it. Things should work as before.
+ovn-nbctl lr-del R2
+ovn-nbctl create Logical_Router name=R2 options:chassis="hv2"
+# Connect alice to R2
+ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24
+# Connect R2 to join
+ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \
+ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \
+R2 static_routes @lrt
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+# Wait for ovn-controller to catch up.
+sleep 1
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
+# Send the packet again.
+as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet
+$PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv2/vif1-tx.pcap | trim_zeros > received1.packets
+echo $expected | trim_zeros >> expout
+AT_CHECK([cat received1.packets], [0], [expout])
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1],[hv2])
AT_CLEANUP
AT_CHECK([cat received.packets], [0], [expout])
done
-as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1])
AT_CLEANUP
as hv1 ovs-vsctl del-port br-int vif1
OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up lp1` = xdown])
-as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1])
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
-
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
-
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
AT_CLEANUP
AT_SETUP([ovn -- nd ])
AT_CHECK([cat $i.packets], [0], [expout])
done
+OVN_CLEANUP([hv1])
+
+AT_CLEANUP
+
+AT_SETUP([ovn -- address sets modification/removal smoke test])
+AT_KEYWORDS([ovn-addr])
+ovn_start
+
+net_add n1
+
+sim_add hv1
as hv1
-OVS_APP_EXIT_AND_WAIT([ovn-controller])
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.1
-as ovn-sb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+row=`ovn-nbctl create Address_Set name=set1 addresses=\"1.1.1.1\"`
+ovn-nbctl set Address_Set $row name=set1 addresses=\"1.1.1.1,1.1.1.2\"
+ovn-nbctl destroy Address_Set $row
-as ovn-nb
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+sleep 1
-as northd
-OVS_APP_EXIT_AND_WAIT([ovn-northd])
+# A bug previously existed in the address set support code
+# that caused ovn-controller to crash after an address set
+# was updated and then removed. This test case ensures
+# that ovn-controller is at least still running after
+# creating, updating, and deleting an address set.
+AT_CHECK([ovs-appctl -t ovn-controller version], [0], [ignore])
-as main
-OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
-OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+OVN_CLEANUP([hv1])
AT_CLEANUP
projects / cascardo / ovs.git / blobdiff