'tun_flags=1/1 none' \
'tun_tos=0 none' \
'tun_ttl=0 none' \
+ 'tun_gbp_id=0 NXM,OXM' \
+ 'tun_gbp_id=0/0x1 NXM,OXM' \
+ 'tun_gbp_flags=0 NXM,OXM' \
+ 'tun_gbp_flags=0/0x1 NXM,OXM' \
+ 'tun_metadata0=0 NXM,OXM' \
+ 'tun_metadata0=0/0x1 NXM,OXM' \
'metadata=0 NXM,OXM,OpenFlow11' \
'metadata=1/1 NXM,OXM,OpenFlow11' \
'in_port=1 any' \
AT_SETUP([ovs-ofctl parse-flows (OpenFlow 1.0)])
AT_DATA([flows.txt], [[
# comment
-tcp,tp_src=123,out_port=5,actions=flood
+tcp,tp_src=123,actions=flood
in_port=LOCAL dl_vlan=9 dl_src=00:0A:E4:25:6B:B0 actions=drop
udp dl_vlan_pcp=7 idle_timeout=5 actions=strip_vlan output:0
tcp,nw_src=192.168.0.3,tp_dst=80 actions=set_queue:37,output:1
AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
[[usable protocols: any
chosen protocol: OpenFlow10-table_id
-OFPT_FLOW_MOD: ADD tcp,tp_src=123 out_port:5 actions=FLOOD
+OFPT_FLOW_MOD: ADD tcp,tp_src=123 actions=FLOOD
OFPT_FLOW_MOD: ADD in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=drop
OFPT_FLOW_MOD: ADD udp,dl_vlan_pcp=7 idle:5 actions=strip_vlan,output:0
OFPT_FLOW_MOD: ADD tcp,nw_src=192.168.0.3,tp_dst=80 actions=set_queue:37,output:1
AT_SETUP([ovs-ofctl parse-flows (OpenFlow 1.1)])
AT_DATA([flows.txt], [[
# comment
-tcp,tp_src=123,out_port=5,actions=flood
+tcp,tp_src=123,actions=flood
in_port=LOCAL dl_vlan=9 dl_src=00:0A:E4:25:6B:B0 actions=drop
udp dl_vlan_pcp=7 idle_timeout=5 actions=strip_vlan output:0
tcp,nw_src=192.168.0.3,tp_dst=80 actions=set_queue:37,output:1
AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
[[usable protocols: any
chosen protocol: OpenFlow11
-OFPT_FLOW_MOD (OF1.1): ADD tcp,tp_src=123 out_port:5 actions=FLOOD
+OFPT_FLOW_MOD (OF1.1): ADD tcp,tp_src=123 actions=FLOOD
OFPT_FLOW_MOD (OF1.1): ADD in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=drop
OFPT_FLOW_MOD (OF1.1): ADD udp,dl_vlan_pcp=7 idle:5 actions=pop_vlan,output:0
OFPT_FLOW_MOD (OF1.1): ADD tcp,nw_src=192.168.0.3,tp_dst=80 actions=set_queue:37,output:1
NXM_NX_REG0_W(a0e0d050/ffffffff)
NXM_NX_REG0_W(00000000/00000000)
+# dp_hash (testing experimenter OXM).
+NXM_NX_DP_HASH(01234567)
+NXOXM_ET_DP_HASH(01234567)
+
# Invalid field number.
01020304(1111/3333)
+# Invalid field numbers (experimenter OXM).
+ffff020800002320(11112222)
+ffff030800002320(1111/3333)
+
# Unimplemented registers.
#
# This test assumes that at least two registers, but fewer than 16,
NXM_NX_REG0(a0e0d050)
<any>
+# dp_hash (testing experimenter OXM).
+NXM_NX_DP_HASH(01234567)
+NXM_NX_DP_HASH(01234567)
+
# Invalid field number.
nx_pull_match() returned error OFPBMC_BAD_FIELD
+# Invalid field numbers (experimenter OXM).
+nx_pull_match() returned error OFPBMC_BAD_FIELD
+nx_pull_match() returned error OFPBMC_BAD_FIELD
+
# Unimplemented registers.
#
# This test assumes that at least two registers, but fewer than 16,
# Check that at least the first warning made it. (It's rate-limited
# so a variable number could show up, especially under valgrind etc.)
AT_CHECK([grep '1-bits in value' stderr | sed 1q], [0], [dnl
-nx_match|WARN|Rejecting NXM/OXM entry 0:1:1:12 with 1-bits in value for bits wildcarded by the mask.
+nx_match|WARN|Rejecting NXM/OXM entry 0:0:1:1:12 with 1-bits in value for bits wildcarded by the mask.
])
# Check that there wasn't any other stderr output.
AT_KEYWORDS([nx-match])
AT_DATA([nx-match.txt], [dnl
NXM_OF_IN_PORT(0001), 01020304(1111/3333), NXM_OF_ETH_TYPE(0800)
+NXM_OF_IN_PORT(0001), ffff020800002320(11112222), NXM_OF_ETH_TYPE(0800)
+NXM_OF_IN_PORT(0001), ffff030800002320(1111/3333), NXM_OF_ETH_TYPE(0800)
])
AT_CHECK([ovs-ofctl --strict parse-nx-match < nx-match.txt], [0], [dnl
nx_pull_match() returned error OFPBMC_BAD_FIELD
+nx_pull_match() returned error OFPBMC_BAD_FIELD
+nx_pull_match() returned error OFPBMC_BAD_FIELD
])
-AT_CHECK([ovs-ofctl '-vPATTERN:console:%c|%p|%m' -vnx_match parse-nx-match < nx-match.txt], [0], [dnl
+AT_CHECK([ovs-ofctl parse-nx-match < nx-match.txt], [0], [dnl
+NXM_OF_IN_PORT(0001), NXM_OF_ETH_TYPE(0800)
+NXM_OF_IN_PORT(0001), NXM_OF_ETH_TYPE(0800)
NXM_OF_IN_PORT(0001), NXM_OF_ETH_TYPE(0800)
-], [nx_match|DBG|OXM header 258:1:1:4 is unknown
])
AT_CLEANUP
-AT_SETUP([ovs-ofctl parse-oxm (OpenFlow 1.5)])
+AT_SETUP([ovs-ofctl parse-oxm (OpenFlow 1.2)])
AT_KEYWORDS([oxm])
AT_DATA([oxm.txt], [dnl
<any>
# Invalid field number.
01020304(1111/3333)
+
+# Invalid field numbers (experimenter OXM).
+ffff020800002320(11112222)
+ffff030800002320(1111/3333)
])
AT_CHECK([ovs-ofctl '-vPATTERN:console:%c|%p|%m' --strict parse-oxm OpenFlow12 < oxm.txt],
[0], [dnl
# Invalid field number.
nx_pull_match() returned error OFPBMC_BAD_FIELD
+
+# Invalid field numbers (experimenter OXM).
+nx_pull_match() returned error OFPBMC_BAD_FIELD
+nx_pull_match() returned error OFPBMC_BAD_FIELD
], [stderr])
# Check that at least the first warning made it. (It's rate-limited
# so a variable number could show up, especially under valgrind etc.)
AT_CHECK([grep '1-bits in value' stderr | sed 1q], [0], [dnl
-nx_match|WARN|Rejecting NXM/OXM entry 32768:2:1:16 with 1-bits in value for bits wildcarded by the mask.
+nx_match|WARN|Rejecting NXM/OXM entry 0:32768:2:1:16 with 1-bits in value for bits wildcarded by the mask.
])
# Check that there wasn't any other stderr output.
AT_CHECK([grep -v '1-bits in value' stderr], [1])
AT_CLEANUP
+AT_SETUP([ovs-ofctl parse-oxm (OpenFlow 1.3)])
+AT_KEYWORDS([oxm])
+AT_DATA([oxm.txt], [dnl
+# actset_output
+ONFOXM_ET_ACTSET_OUTPUT(00000000)
+ONFOXM_ET_ACTSET_OUTPUT(fffffffe)
+ONFOXM_ET_ACTSET_OUTPUT(fffffff7)
+OXM_OF_ACTSET_OUTPUT(00000000)
+OXM_OF_ACTSET_OUTPUT(fffffffe)
+OXM_OF_ACTSET_OUTPUT(fffffff7)
+])
+AT_CHECK([ovs-ofctl '-vPATTERN:console:%c|%p|%m' --strict parse-oxm OpenFlow13 < oxm.txt],
+ [0], [dnl
+# actset_output
+ONFOXM_ET_ACTSET_OUTPUT(00000000)
+ONFOXM_ET_ACTSET_OUTPUT(fffffffe)
+ONFOXM_ET_ACTSET_OUTPUT(fffffff7)
+ONFOXM_ET_ACTSET_OUTPUT(00000000)
+ONFOXM_ET_ACTSET_OUTPUT(fffffffe)
+ONFOXM_ET_ACTSET_OUTPUT(fffffff7)
+], [])
+AT_CLEANUP
+
AT_SETUP([ovs-ofctl parse-oxm (OpenFlow 1.5)])
AT_KEYWORDS([oxm])
AT_DATA([oxm.txt], [dnl
NXM_NX_REG0_W(a0e0d050/f0f0f0f0), NXM_NX_REG1(a0e0d050)
NXM_NX_REG1_W(a0e0d050/f0f0f0f0), NXM_NX_REG2_W(a0e0d050/f0f0f0f0)
NXM_NX_REG1_W(a0e0d050/f0f0f0f0), NXM_NX_REG2(a0e0d050)
+
+# actset_output
+ONFOXM_ET_ACTSET_OUTPUT(00000000)
+ONFOXM_ET_ACTSET_OUTPUT(fffffffe)
+ONFOXM_ET_ACTSET_OUTPUT(fffffff7)
+OXM_OF_ACTSET_OUTPUT(00000000)
+OXM_OF_ACTSET_OUTPUT(fffffffe)
+OXM_OF_ACTSET_OUTPUT(fffffff7)
])
AT_CHECK([ovs-ofctl '-vPATTERN:console:%c|%p|%m' --strict parse-oxm OpenFlow15 < oxm.txt],
[0], [dnl
OXM_OF_PKT_REG0_W(a0e0d050a0e0d050/f0f0f0f0ffffffff)
OXM_OF_PKT_REG0_W(00000000a0e0d050/00000000f0f0f0f0), OXM_OF_PKT_REG1_W(a0e0d05000000000/f0f0f0f000000000)
OXM_OF_PKT_REG0_W(00000000a0e0d050/00000000f0f0f0f0), OXM_OF_PKT_REG1_W(a0e0d05000000000/ffffffff00000000)
+
+# actset_output
+OXM_OF_ACTSET_OUTPUT(00000000)
+OXM_OF_ACTSET_OUTPUT(fffffffe)
+OXM_OF_ACTSET_OUTPUT(fffffff7)
+OXM_OF_ACTSET_OUTPUT(00000000)
+OXM_OF_ACTSET_OUTPUT(fffffffe)
+OXM_OF_ACTSET_OUTPUT(fffffff7)
], [])
AT_CLEANUP
AT_KEYWORDS([oxm])
AT_DATA([oxm.txt], [dnl
OXM_OF_IN_PORT(00000001), 01020304(1111/3333), OXM_OF_ETH_TYPE(0800)
+OXM_OF_IN_PORT(00000001), ffff020800002320(11112222), OXM_OF_ETH_TYPE(0800)
+OXM_OF_IN_PORT(00000001), ffff030800002320(1111/3333), OXM_OF_ETH_TYPE(0800)
])
AT_CHECK([ovs-ofctl --strict parse-oxm OpenFlow12 < oxm.txt], [0], [dnl
nx_pull_match() returned error OFPBMC_BAD_FIELD
+nx_pull_match() returned error OFPBMC_BAD_FIELD
+nx_pull_match() returned error OFPBMC_BAD_FIELD
])
AT_CHECK([ovs-ofctl parse-oxm OpenFlow12 < oxm.txt], [0], [dnl
OXM_OF_IN_PORT(00000001), OXM_OF_ETH_TYPE(0800)
+OXM_OF_IN_PORT(00000001), OXM_OF_ETH_TYPE(0800)
+OXM_OF_IN_PORT(00000001), OXM_OF_ETH_TYPE(0800)
+])
+AT_CLEANUP
+
+AT_SETUP([experimenter OXM encoding])
+AT_DATA([oxm.txt], [dnl
+NXM_NX_DP_HASH(01234567)
+NXOXM_ET_DP_HASH(01234567)
+
+NXM_NX_DP_HASH_W(01234567/0fffffff)
+NXOXM_ET_DP_HASH_W(01234567/0fffffff)
+])
+
+# To allow for testing experimenter OXM, which doesn't really have many
+# examples in the wild, we've defined a variant of NXM_NX_DP_HASH that uses
+# the experimenter OXM mechanism, called NXOXM_ET_DP_HASH. We've defined
+# it as if it were introduced with OpenFlow 1.5, which gives us the
+# opportunity to see that both forms are accepted in all OpenFlow versions
+# but the experimenter form is used for encoding in OF1.5+.
+#
+# First verify that both forms are accepted and NXOXM_ET_DP_HASH is encoded
+# in OF1.5.
+AT_CHECK([ovs-ofctl -m --strict parse-oxm OpenFlow15 < oxm.txt], [0], [dnl
+NXOXM_ET_DP_HASH(01234567)
+00000000 00 01 00 10 ff ff 00 08-00 00 23 20 01 23 45 67 @&t@
+NXOXM_ET_DP_HASH(01234567)
+00000000 00 01 00 10 ff ff 00 08-00 00 23 20 01 23 45 67 @&t@
+
+NXOXM_ET_DP_HASH_W(01234567/0fffffff)
+00000000 00 01 00 14 ff ff 01 0c-00 00 23 20 01 23 45 67 @&t@
+00000010 0f ff ff ff 00 00 00 00-
+NXOXM_ET_DP_HASH_W(01234567/0fffffff)
+00000000 00 01 00 14 ff ff 01 0c-00 00 23 20 01 23 45 67 @&t@
+00000010 0f ff ff ff 00 00 00 00-
+])
+
+# Then verify that both forms are accepted and NXM_NX_DP_HASH is encoded
+# in OF1.2.
+AT_CHECK([ovs-ofctl -m --strict parse-oxm OpenFlow12 < oxm.txt], [0], [dnl
+NXM_NX_DP_HASH(01234567)
+00000000 00 01 00 0c 00 01 46 04-01 23 45 67 00 00 00 00 @&t@
+NXM_NX_DP_HASH(01234567)
+00000000 00 01 00 0c 00 01 46 04-01 23 45 67 00 00 00 00 @&t@
+
+NXM_NX_DP_HASH_W(01234567/0fffffff)
+00000000 00 01 00 10 00 01 47 08-01 23 45 67 0f ff ff ff @&t@
+NXM_NX_DP_HASH_W(01234567/0fffffff)
+00000000 00 01 00 10 00 01 47 08-01 23 45 67 0f ff ff ff @&t@
])
AT_CLEANUP
[NXM_OF_ETH_TYPE(0800), NXM_OF_IP_PROTO(06), NXM_NX_TCP_FLAGS(0fff)
])
-# Check that marshaling in OXM for OF1.2 through OF1.4 gives OXM
-# headers except for TCP flags, which didn't have an OXM definition until
-# OF1.5.
-for version in OpenFlow12 OpenFlow13 OpenFlow14; do
- AT_CHECK([echo "$tcp_flags" | ovs-ofctl parse-oxm $version], [0],
- [OXM_OF_ETH_TYPE(0800), OXM_OF_IP_PROTO(06), NXM_NX_TCP_FLAGS(0fff)
+# Check that marshaling in OXM for OF1.2 gives OXM headers except for
+# TCP flags, which didn't have an OXM definition.
+AT_CHECK([echo "$tcp_flags" | ovs-ofctl parse-oxm OpenFlow12], [0],
+ [OXM_OF_ETH_TYPE(0800), OXM_OF_IP_PROTO(06), NXM_NX_TCP_FLAGS(0fff)
+])
+
+# Check that marshaling in OXM for OF1.3 and OF1.4 gives OXM headers,
+# including the ONF extension for TCP flags introduced in OF1.3.
+AT_CHECK([echo "$tcp_flags" | ovs-ofctl parse-oxm OpenFlow13], [0],
+ [OXM_OF_ETH_TYPE(0800), OXM_OF_IP_PROTO(06), ONFOXM_ET_TCP_FLAGS(0fff)
+])
+AT_CHECK([echo "$tcp_flags" | ovs-ofctl parse-oxm OpenFlow14], [0],
+ [OXM_OF_ETH_TYPE(0800), OXM_OF_IP_PROTO(06), ONFOXM_ET_TCP_FLAGS(0fff)
])
-done
# OpenFlow 1.5 added an OXM header for TCP flags:
AT_CHECK([echo "$tcp_flags" | ovs-ofctl parse-oxm OpenFlow15], [0],
OVS_VSWITCHD_STOP
AT_CLEANUP
+
+dnl Check importance parameter added in OF1.4.
+dnl It validates whether importance set via add-flow via OpenFlow1.4+ gets
+dnl set or not by validating it againt the dump-flows output via OpenFlow1.4+
+dnl If add-flow or dump-flows is used with later version of OpenFlow prior to 1.4+
+dnl then the importance will be considered zero whether provided as an argument.
+
+AT_SETUP([ovs-ofctl rule with importance])
+OVS_VSWITCHD_START
+dnl Flow with importance parameter added via OF1.4+ and later version
+AT_CHECK([ovs-ofctl -O OpenFlow14 add-flow br0 priority=21,importance=21,actions=normal])
+AT_CHECK([ovs-ofctl add-flow br0 priority=22,importance=22,actions=normal])
+
+dnl Importance parameter will only be visible of flows that are added via OF1.4+ if dumped via OF1.4+
+AT_CHECK([ovs-ofctl -O OpenFlow14 dump-flows br0 | ofctl_strip | sed '/ST_FLOW reply/d' | sort], [0], [dnl
+ importance=21, priority=21 actions=NORMAL
+ priority=22 actions=NORMAL
+])
+
+dnl Importance parameter will not be visible if flow is dumped with previous version prior to OF1.4+ whether added via OF1.4+
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sed '/ST_FLOW reply/d' | sort], [0], [dnl
+ priority=21 actions=NORMAL
+ priority=22 actions=NORMAL
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+
+dnl Importance parameter added in OF1.4.
+dnl This validates whether flows with importance
+dnl parameter are getting replaced with "replace-flows" or
+dnl not by validating dump-flows output after replace with the expected output.
+
+AT_SETUP([ovs-ofctl replace-flows with importance])
+OVS_VSWITCHD_START
+
+dnl Add flows to br0 with importance via OF1.4+. For more details refer "ovs-ofctl rule with importance" test case.
+for i in 1 2 3 4 5 6 7 8; do echo "dl_vlan=$i,importance=$i,actions=drop"; done > add-flows.txt
+AT_CHECK([ovs-ofctl -O OpenFlow14 add-flows br0 add-flows.txt])
+
+dnl Replace some flows in the bridge.
+for i in 1 3 5 7; do echo "dl_vlan=$i,importance=`expr $i + 10`,actions=drop"; done > replace-flows.txt
+AT_CHECK([ovs-ofctl -O OpenFlow14 replace-flows br0 replace-flows.txt])
+
+dnl Dump them and compare the dump flows output against the expected output.
+for i in 1 2 3 4 5 6 7 8; do if [[ `expr $i % 2` -eq 1 ]]; then importance=`expr $i + 10`; else importance=$i; fi; echo " importance=$importance, dl_vlan=$i actions=drop"; done | sort > expout
+AT_CHECK([ovs-ofctl -O OpenFlow14 dump-flows br0 | ofctl_strip | sed '/OFPST_FLOW/d' | sort],
+ [0], [expout])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ovs-ofctl replace-flows with --bundle])
+OVS_VSWITCHD_START
+
+AT_CHECK([ovs-appctl vlog/set vconn:dbg])
+
+dnl Add flows to br0 with importance via OF1.4+, using an OF1.4+ bundle. For more details refer "ovs-ofctl rule with importance" test case.
+for i in 1 2 3 4 5 6 7 8; do echo "dl_vlan=$i,importance=$i,actions=drop"; done > add-flows.txt
+AT_CHECK([ovs-ofctl --bundle add-flows br0 add-flows.txt])
+
+dnl Replace some flows in the bridge.
+for i in 1 3 5 7; do echo "dl_vlan=$i,importance=`expr $i + 10`,actions=drop"; done > replace-flows.txt
+AT_CHECK([ovs-ofctl --bundle replace-flows br0 replace-flows.txt])
+
+dnl Dump them and compare the dump flows output against the expected output.
+for i in 1 2 3 4 5 6 7 8; do if [[ `expr $i % 2` -eq 1 ]]; then importance=`expr $i + 10`; else importance=$i; fi; echo " importance=$importance, dl_vlan=$i actions=drop"; done | sort > expout
+AT_CHECK([ovs-ofctl -O OpenFlow14 dump-flows br0 | ofctl_strip | sed '/OFPST_FLOW/d' | sort],
+ [0], [expout])
+
+dnl Check logs for OpenFlow trace
+# Prevent race.
+OVS_WAIT_UNTIL([cat ovs-vswitchd.log | vconn_windows_sub | test `grep -- "|vconn|DBG|unix: sent (Success): OFPST_FLOW reply" | wc -l` -ge 2])
+# AT_CHECK([sed -n "s/^.*\(|vconn|DBG|.*xid=.*:\).*$/\1/p" ovs-vswitchd.log], [0], [dnl
+AT_CHECK([print_vconn_debug | vconn_windows_sub | ofctl_strip], [0], [dnl
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
+ version bitmap: 0x01, 0x05
+vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x06 and earlier, peer supports versions 0x01, 0x05)
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REPLY flags=0
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=1 importance:1 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=2 importance:2 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=3 importance:3 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=4 importance:4 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=5 importance:5 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=6 importance:6 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=7 importance:7 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=8 importance:8 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REPLY flags=0
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
+ version bitmap: 0x01, 0x05
+vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x06 and earlier, peer supports versions 0x01, 0x05)
+vconn|DBG|unix: received: OFPST_FLOW request (OF1.4):
+vconn|DBG|unix: sent (Success): OFPST_FLOW reply (OF1.4):
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REPLY flags=0
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=1 importance:11 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=3 importance:13 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=5 importance:15 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD dl_vlan=7 importance:17 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REPLY flags=0
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
+ version bitmap: 0x05
+vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x06 and earlier, peer supports version 0x05)
+vconn|DBG|unix: received: OFPST_FLOW request (OF1.4):
+vconn|DBG|unix: sent (Success): OFPST_FLOW reply (OF1.4):
+ importance=2, dl_vlan=2 actions=drop
+ importance=4, dl_vlan=4 actions=drop
+ importance=6, dl_vlan=6 actions=drop
+ importance=8, dl_vlan=8 actions=drop
+ importance=11, dl_vlan=1 actions=drop
+ importance=13, dl_vlan=3 actions=drop
+ importance=15, dl_vlan=5 actions=drop
+ importance=17, dl_vlan=7 actions=drop
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
projects / cascardo / ovs.git / blobdiff