. ns
. IP "\\$1"
..
-.TH ovs\-vsctl 8 "September 2009" "Open vSwitch" "Open vSwitch Manual"
+.de ST
+. PP
+. RS -0.15in
+. I "\\$1"
+. RE
+..
+.TH ovs\-vsctl 8 "@VERSION@" "Open vSwitch" "Open vSwitch Manual"
+.\" This program's name:
.ds PN ovs\-vsctl
.
.SH NAME
ovs\-vsctl \- utility for querying and configuring \fBovs\-vswitchd\fR
.
.SH SYNOPSIS
-\fBovs\-vsctl\fR [\fIoptions\fR] \fIcommand \fR[\fIargs\fR\&...]
+\fBovs\-vsctl\fR [\fIoptions\fR] \fB\-\-\fR [\fIoptions\fR] \fIcommand
+\fR[\fIargs\fR] [\fB\-\-\fR [\fIoptions\fR] \fIcommand \fR[\fIargs\fR]]...
.
.SH DESCRIPTION
-The \fBovs\-vsctl\fR program configures \fBovs\-vswitchd\fR(8), mainly
-by providing a high\-level interface to editing its configuration file
-\fBovs\-vswitchd.conf\fR(5). This program is mainly intended for use
-when \fBovs\-vswitchd\fR is running, but it can also be used when
-\fBovs\-vswitchd\fR is not running. In the latter case configuration
-changes will only take effect when \fBovs\-vswitchd\fR is started.
-.PP
-By default, each time \fBovs\-vsctl\fR runs, it examines and,
-depending on the requested command, possibly applies changes to an
-\fBovs\-vswitchd.conf\fR file. Then, if it applied any changes and if
-\fBovs\-vswitchd\fR is running, it tells \fBovs\-vswitchd\fR to reload
-the modified configuration file and waits for the reload to complete
-before exiting.
+The \fBovs\-vsctl\fR program configures \fBovs\-vswitchd\fR(8) by
+providing a high\-level interface to its configuration database.
+See \fBovs\-vswitchd.conf.db\fR(5) for comprehensive documentation of
+the database schema.
+.PP
+\fBovs\-vsctl\fR connects to an \fBovsdb\-server\fR process that
+maintains an Open vSwitch configuration database. Using this
+connection, it queries and possibly applies changes to the database,
+depending on the supplied commands. Then, if it applied any changes,
+by default it waits until \fBovs\-vswitchd\fR has finished
+reconfiguring itself before it exits. (If you use \fBovs\-vsctl\fR
+when \fBovs\-vswitchd\fR is not running, use \fB\-\-no\-wait\fR.)
+.PP
+\fBovs\-vsctl\fR can perform any number of commands in a single run,
+implemented as a single atomic transaction against the database.
+.PP
+The \fBovs\-vsctl\fR command line begins with global options (see
+\fBOPTIONS\fR below for details). The global options are followed by
+one or more commands. Each command should begin with \fB\-\-\fR by
+itself as a command-line argument, to separate it from the following
+commands. (The \fB\-\-\fR before the first command is optional.) The
+command
+itself starts with command-specific options, if any, followed by the
+command name and any arguments. See \fBEXAMPLES\fR below for syntax
+examples.
.
.SS "Linux VLAN Bridging Compatibility"
The \fBovs\-vsctl\fR program supports the model of a bridge
much like a bridge separate from its ``parent bridge,'' but the actual
implementation in Open vSwitch uses only a single bridge, with ports on
the fake bridge assigned the implicit VLAN of the fake bridge of which
-they are members.
+they are members. (A fake bridge for VLAN 0 receives packets that
+have no 802.1Q tag or a tag with VLAN 0.)
.
.SH OPTIONS
.
-The following options affect the general outline of \fBovs\-vsctl\fR's
-activities:
-.
-.IP "\fB\-c \fIfile\fR"
-.IQ "\fB\-\-config=\fIfile\fR"
-Sets the configuration file that \fBovs\-vsctl\fR reads and possibly
-modifies. The default is \fB@localstatedir@/ovs\-vswitchd.conf\fR.
-.IP
-If \fIfile\fR is specified as \fB\-\fR, then \fBovs\-vsctl\fR reads
-the configuration file from standard input and, for commands that
-modify the configuration, writes the new one to standard output. This
-is useful for testing but it should not be used in production because
-it bypasses the Open vSwitch configuration file locking protocol.
-.
-.IP "\fB\-t \fItarget\fR"
-.IQ "\fB\-\-target=\fItarget\fR"
-Configures how \fBovs\-vsctl\fR contacts \fBovs\-vswitchd\fR to
-instruct it to reload its configuration file. The \fItarget\fR takes
-one of two forms:
+The following options affect the behavior \fBovs\-vsctl\fR as a whole.
+Some individual commands also accept their own options, which are
+given just before the command name. If the first command on the
+command line has options, then those options must be separated from
+the global options by \fB\-\-\fR.
+.
+.IP "\fB\-\-db=\fIserver\fR"
+Sets \fIserver\fR as the database server that \fBovs\-vsctl\fR
+contacts to query or modify configuration. The default is
+\fBunix:@RUNDIR@/db.sock\fR. \fIserver\fR must take one of the
+following forms:
.RS
-.IP \(bu
-The name of a Unix domain socket on which \fBovs\-vswitchd\fR is
-listening for control channel connections. By default,
-\fBovs\-vswitchd\fR listens on a Unix domain socket named
-\fB@RUNDIR@/ovs\-vswitchd.\fIpid\fR.ctl\fR, where \fIpid\fR is the
-\fBovs\-vswitchd\fR process's process ID.
-.IP \(bu
-The name of a pidfile, that is, a file whose contents are the process
-ID of a running process as a decimal number. \fBovs\-vswitchd\fR
-creates a pidfile if it is invoked with the \fB\-\-pidfile\fR option.
-\fBovs\-vsctl\fR reads the pidfile, then looks for a Unix socket named
-\fB@RUNDIR@/ovs\-vswitchd.\fIpid\fR.ctl\fR, where \fIpid\fR is
-replaced by the process ID read from \fItarget\fR, and uses that file
-as if it had been specified directly as the target.
+.so ovsdb/remote-active.man
+.so ovsdb/remote-passive.man
.RE
+.
+.IP "\fB\-\-no\-wait\fR"
+Prevents \fBovs\-vsctl\fR from waiting for \fBovs\-vswitchd\fR to
+reconfigure itself according to the modified database. This
+option should be used if \fBovs\-vswitchd\fR is not running;
+otherwise, \fBovs\-vsctl\fR will not exit until \fBovs\-vswitchd\fR
+starts.
.IP
-If \fItarget\fR does not begin with \fB/\fR, then \fB@RUNDIR@/\fR is
-implicitly prefixed to it.
-.IP
-If neither \fB\-t\fR nor \fB\-\-target\fR is specified, the default target is
-\fB@RUNDIR@/ovs\-vswitchd.pid\fR.
-.IP "\fB\-\-no\-reload\fR"
-Prevents \fBovs\-vsctl\fR from telling \fBovs\-vswitchd\fR to reload
-its configuration file.
+This option has no effect if the commands specified do not change the
+database.
.
.IP "\fB\-\-no\-syslog\fR"
By default, \fBovs\-vsctl\fR logs its arguments and the details of any
changes that it makes to the system log. This option disables this
logging.
+.IP
+This option is equivalent to \fB\-\-verbose=vsctl:syslog:warn\fR.
+.
+.IP "\fB\-\-oneline\fR"
+Modifies the output format so that the output for each command is printed
+on a single line. New-line characters that would otherwise separate
+lines are printed as \fB\\n\fR, and any instances of \fB\\\fR that
+would otherwise appear in the output are doubled.
+Prints a blank line for each command that has no output.
+This option does not affect the formatting of output from the
+\fBlist\fR or \fBfind\fR commands; see \fBTable Formatting Options\fR
+below.
+.
+.IP "\fB\-\-dry\-run\fR"
+Prevents \fBovs\-vsctl\fR from actually modifying the database.
+.
+.IP "\fB\-t \fIsecs\fR"
+.IQ "\fB\-\-timeout=\fIsecs\fR"
+By default, or with a \fIsecs\fR of \fB0\fR, \fBovs\-vsctl\fR waits
+forever for a response from the database. This option limits runtime
+to approximately \fIsecs\fR seconds. If the timeout expires,
+\fBovs\-vsctl\fR will exit with a \fBSIGALRM\fR signal. (A timeout
+would normally happen only if the database cannot be contacted, or if
+the system is overloaded.)
+.
+.IP "\fB\-\-retry\fR"
+Without this option, if \fBovs\-vsctl\fR connects outward to the
+database server (the default) then \fBovs\-vsctl\fR will try to
+connect once and exit with an error if the connection fails (which
+usually means that \fBovsdb\-server\fR is not running).
+.IP
+With this option, or if \fB\-\-db\fR specifies that \fBovs\-vsctl\fR
+should listen for an incoming connection from the database server,
+then \fBovs\-vsctl\fR will wait for a connection to the database
+forever.
+.IP
+Regardless of this setting, \fB\-\-timeout\fR always limits how long
+\fBovs\-vsctl\fR will wait.
+.
+.SS "Table Formatting Options"
+These options control the format of output from the \fBlist\fR and
+\fBfind\fR commands.
+.so lib/table.man
+.
+.SS "Public Key Infrastructure Options"
+.so lib/ssl.man
+.so lib/ssl-bootstrap.man
+.so lib/ssl-peer-ca-cert.man
+.so lib/vlog.man
+.so lib/common.man
.
.SH COMMANDS
The commands implemented by \fBovs\-vsctl\fR are described in the
sections below.
+.SS "Open vSwitch Commands"
+These commands work with an Open vSwitch as a whole.
+.
+.IP "\fBinit\fR"
+Initializes the Open vSwitch database, if it is empty. If the
+database has already been initialized, this command has no effect.
+.IP
+Any successful \fBovs\-vsctl\fR command automatically initializes the
+Open vSwitch database if it is empty. This command is provided to
+initialize the database without executing any other command.
+.
+.IP "\fBshow\fR"
+Prints a brief overview of the database contents.
+.
+.IP "\fBemer\-reset\fR"
+Reset the configuration into a clean state. It deconfigures OpenFlow
+controllers, OVSDB servers, and SSL, and deletes port mirroring,
+\fBfail_mode\fR, NetFlow, sFlow, and IPFIX configuration. This
+command also removes all \fBother\-config\fR keys from all database
+records, except that \fBother\-config:hwaddr\fR is preserved if it is
+present in a Bridge record. Other networking configuration is left
+as-is.
.
.SS "Bridge Commands"
These commands examine and manipulate Open vSwitch bridges.
.
-.IP "\fBadd\-br \fIbridge\fR"
+.IP "[\fB\-\-may\-exist\fR] \fBadd\-br \fIbridge\fR"
Creates a new bridge named \fIbridge\fR. Initially the bridge will
have no ports (other than \fIbridge\fR itself).
+.IP
+Without \fB\-\-may\-exist\fR, attempting to create a bridge that
+exists is an error. With \fB\-\-may\-exist\fR, this command does
+nothing if \fIbridge\fR already exists as a real bridge.
.
-.IP "\fBadd\-br \fIbridge parent vlan\fR"
+.IP "[\fB\-\-may\-exist\fR] \fBadd\-br \fIbridge parent vlan\fR"
Creates a ``fake bridge'' named \fIbridge\fR within the existing Open
vSwitch bridge \fIparent\fR, which must already exist and must not
itself be a fake bridge. The new fake bridge will be on 802.1Q VLAN
-\fIvlan\fR, which must be an integer between 1 and 4095. Initially
+\fIvlan\fR, which must be an integer between 0 and 4095. The parent
+bridge must not already have a fake bridge for \fIvlan\fR. Initially
\fIbridge\fR will have no ports (other than \fIbridge\fR itself).
+.IP
+Without \fB\-\-may\-exist\fR, attempting to create a bridge that
+exists is an error. With \fB\-\-may\-exist\fR, this command does
+nothing if \fIbridge\fR already exists as a VLAN bridge under
+\fIparent\fR for \fIvlan\fR.
.
-.IP "\fBdel\-br \fIbridge\fR"
+.IP "[\fB\-\-if\-exists\fR] \fBdel\-br \fIbridge\fR"
Deletes \fIbridge\fR and all of its ports. If \fIbridge\fR is a real
bridge, this command also deletes any fake bridges that were created
with \fIbridge\fR as parent, including all of their ports.
+.IP
+Without \fB\-\-if\-exists\fR, attempting to delete a bridge that does
+not exist is an error. With \fB\-\-if\-exists\fR, attempting to
+delete a bridge that does not exist has no effect.
.
-.IP "\fBlist\-br\fR"
+.IP "[\fB\-\-real\fR|\fB\-\-fake\fR] \fBlist\-br\fR"
Lists all existing real and fake bridges on standard output, one per
-line.
+line. With \fB\-\-real\fR or \fB\-\-fake\fR, only bridges of that type
+are returned.
.
.IP "\fBbr\-exists \fIbridge\fR"
Tests whether \fIbridge\fR exists as a real or fake bridge. If so,
If \fIbridge\fR is a fake bridge, prints the name of its parent
bridge. If \fIbridge\fR is a real bridge, print \fIbridge\fR.
.
+.IP "\fBbr\-set\-external\-id \fIbridge key\fR [\fIvalue\fR]"
+Sets or clears an ``external ID'' value on \fIbridge\fR. These values
+are intended to identify entities external to Open vSwitch with which
+\fIbridge\fR is associated, e.g. the bridge's identifier in a
+virtualization management platform. The Open vSwitch database schema
+specifies well-known \fIkey\fR values, but \fIkey\fR and \fIvalue\fR
+are otherwise arbitrary strings.
+.IP
+If \fIvalue\fR is specified, then \fIkey\fR is set to \fIvalue\fR for
+\fIbridge\fR, overwriting any previous value. If \fIvalue\fR is
+omitted, then \fIkey\fR is removed from \fIbridge\fR's set of external
+IDs (if it was present).
+.IP
+For real bridges, the effect of this command is similar to that of a
+\fBset\fR or \fBremove\fR command in the \fBexternal\-ids\fR column of
+the \fBBridge\fR table. For fake bridges, it actually modifies keys
+with names prefixed by \fBfake\-bridge\-\fR in the \fBPort\fR table.
+.
+.IP "\fBbr\-get\-external\-id \fIbridge\fR [\fIkey\fR]"
+Queries the external IDs on \fIbridge\fR. If \fIkey\fR is specified,
+the output is the value for that \fIkey\fR or the empty string if
+\fIkey\fR is unset. If \fIkey\fR is omitted, the output is
+\fIkey\fB=\fIvalue\fR, one per line, for each key-value pair.
+.IP
+For real bridges, the effect of this command is similar to that of a
+\fBget\fR command in the \fBexternal\-ids\fR column of the
+\fBBridge\fR table. For fake bridges, it queries keys with names
+prefixed by \fBfake\-bridge\-\fR in the \fBPort\fR table.
+.
.SS "Port Commands"
.
These commands examine and manipulate Open vSwitch ports. These
Lists all of the ports within \fIbridge\fR on standard output, one per
line. The local port \fIbridge\fR is not included in the list.
.
-.IP "\fBadd\-port \fIbridge port\fR"
+.IP "[\fB\-\-may\-exist\fR] \fBadd\-port \fIbridge port \fR[\fIcolumn\fR[\fB:\fIkey\fR]\fR=\fIvalue\fR]\&...\fR"
Creates on \fIbridge\fR a new port named \fIport\fR from the network
device of the same name.
+.IP
+Optional arguments set values of column in the Port record created by
+the command. For example, \fBtag=9\fR would make the port an access
+port for VLAN 9. The syntax is the same as that for the \fBset\fR
+command (see \fBDatabase Commands\fR below).
+.IP
+Without \fB\-\-may\-exist\fR, attempting to create a port that exists
+is an error. With \fB\-\-may\-exist\fR, this command does nothing if
+\fIport\fR already exists on \fIbridge\fR and is not a bonded port.
.
-.IP "\fBadd\-bond \fIbridge port iface\fR\&..."
+.IP "[\fB\-\-fake\-iface\fR] \fBadd\-bond \fIbridge port iface\fR\&... [\fIcolumn\fR[\fB:\fIkey\fR]\fR=\fIvalue\fR]\&...\fR"
Creates on \fIbridge\fR a new port named \fIport\fR that bonds
together the network devices given as each \fIiface\fR. At least two
-interfaces must be named.
+interfaces must be named. If the interfaces are DPDK enabled then
+the transaction will need to include operations to explicitly set the
+interface type to 'dpdk'.
+.IP
+Optional arguments set values of column in the Port record created by
+the command. The syntax is the same as that for the \fBset\fR command
+(see \fBDatabase Commands\fR below).
+.IP
+With \fB\-\-fake\-iface\fR, a fake interface with the name \fIport\fR is
+created. This should only be used for compatibility with legacy
+software that requires it.
+.IP
+Without \fB\-\-may\-exist\fR, attempting to create a port that exists
+is an error. With \fB\-\-may\-exist\fR, this command does nothing if
+\fIport\fR already exists on \fIbridge\fR and bonds together exactly
+the specified interfaces.
.
-.IP "\fBdel\-port \fR[\fIbridge\fR] \fIport\fR"
+.IP "[\fB\-\-if\-exists\fR] \fBdel\-port \fR[\fIbridge\fR] \fIport\fR"
Deletes \fIport\fR. If \fIbridge\fR is omitted, \fIport\fR is removed
from whatever bridge contains it; if \fIbridge\fR is specified, it
must be the real or fake bridge that contains \fIport\fR.
+.IP
+Without \fB\-\-if\-exists\fR, attempting to delete a port that does
+not exist is an error. With \fB\-\-if\-exists\fR, attempting to
+delete a port that does not exist has no effect.
+.
+.IP "[\fB\-\-if\-exists\fR] \fB\-\-with\-iface del\-port \fR[\fIbridge\fR] \fIiface\fR"
+Deletes the port named \fIiface\fR or that has an interface named
+\fIiface\fR. If \fIbridge\fR is omitted, the port is removed from
+whatever bridge contains it; if \fIbridge\fR is specified, it must be
+the real or fake bridge that contains the port.
+.IP
+Without \fB\-\-if\-exists\fR, attempting to delete the port for an
+interface that does not exist is an error. With \fB\-\-if\-exists\fR,
+attempting to delete the port for an interface that does not exist has
+no effect.
.
.IP "\fBport\-to\-br \fIport\fR"
Prints the name of the bridge that contains \fIport\fR on standard
Prints the name of the bridge that contains \fIiface\fR on standard
output.
.
+.SS "OpenFlow Controller Connectivity"
+.
+\fBovs\-vswitchd\fR can perform all configured bridging and switching
+locally, or it can be configured to communicate with one or more
+external OpenFlow controllers. The switch is typically configured to
+connect to a primary controller that takes charge of the bridge's flow
+table to implement a network policy. In addition, the switch can be
+configured to listen to connections from service controllers. Service
+controllers are typically used for occasional support and maintenance,
+e.g. with \fBovs\-ofctl\fR.
+.
+.IP "\fBget\-controller\fR \fIbridge\fR"
+Prints the configured controller target.
+.
+.IP "\fBdel\-controller\fR \fIbridge\fR"
+Deletes the configured controller target.
+.
+.IP "\fBset\-controller\fR \fIbridge\fR \fItarget\fR\&..."
+Sets the configured controller target or targets. Each \fItarget\fR may
+use any of the following forms:
+.
+.RS
+.so lib/vconn-active.man
+.so lib/vconn-passive.man
+.RE
+.
+.ST "Controller Failure Settings"
+.PP
+When a controller is configured, it is, ordinarily, responsible for
+setting up all flows on the switch. Thus, if the connection to
+the controller fails, no new network connections can be set up. If
+the connection to the controller stays down long enough, no packets
+can pass through the switch at all.
+.PP
+If the value is \fBstandalone\fR, or if neither of these settings
+is set, \fBovs\-vswitchd\fR will take over
+responsibility for setting up
+flows when no message has been received from the controller for three
+times the inactivity probe interval. In this mode,
+\fBovs\-vswitchd\fR causes the datapath to act like an ordinary
+MAC-learning switch. \fBovs\-vswitchd\fR will continue to retry connecting
+to the controller in the background and, when the connection succeeds,
+it discontinues its standalone behavior.
+.PP
+If this option is set to \fBsecure\fR, \fBovs\-vswitchd\fR will not
+set up flows on its own when the controller connection fails.
+.
+.IP "\fBget\-fail\-mode\fR \fIbridge\fR"
+Prints the configured failure mode.
+.
+.IP "\fBdel\-fail\-mode\fR \fIbridge\fR"
+Deletes the configured failure mode.
+.
+.IP "\fBset\-fail\-mode\fR \fIbridge\fR \fBstandalone\fR|\fBsecure\fR"
+Sets the configured failure mode.
+.
+.SS "Manager Connectivity"
+.
+These commands manipulate the \fBmanager_options\fR column in the
+\fBOpen_vSwitch\fR table and rows in the \fBManagers\fR table. When
+\fBovsdb\-server\fR is configured to use the \fBmanager_options\fR column for
+OVSDB connections (as described in \fBINSTALL.Linux\fR and in the startup
+scripts provided with Open vSwitch), this allows the administrator to use
+\fBovs\-vsctl\fR to configure database connections.
+.
+.IP "\fBget\-manager\fR"
+Prints the configured manager(s).
+.
+.IP "\fBdel\-manager\fR"
+Deletes the configured manager(s).
+.
+.IP "\fBset\-manager\fR \fItarget\fR\&..."
+Sets the configured manager target or targets. Each \fItarget\fR may
+use any of the following forms:
+.
+.RS
+.so ovsdb/remote-active.man
+.so ovsdb/remote-passive.man
+.RE
+.
+.SS "SSL Configuration"
+When \fBovs\-vswitchd\fR is configured to connect over SSL for management or
+controller connectivity, the following parameters are required:
+.TP
+\fIprivate-key\fR
+Specifies a PEM file containing the private key used as the virtual
+switch's identity for SSL connections to the controller.
+.TP
+\fIcertificate\fR
+Specifies a PEM file containing a certificate, signed by the
+certificate authority (CA) used by the controller and manager, that
+certifies the virtual switch's private key, identifying a trustworthy
+switch.
+.TP
+\fIca-cert\fR
+Specifies a PEM file containing the CA certificate used to verify that
+the virtual switch is connected to a trustworthy controller.
+.PP
+These files are read only once, at \fBovs\-vswitchd\fR startup time. If
+their contents change, \fBovs\-vswitchd\fR must be killed and restarted.
+.PP
+These SSL settings apply to all SSL connections made by the virtual
+switch.
+.
+.IP "\fBget\-ssl\fR"
+Prints the SSL configuration.
+.
+.IP "\fBdel\-ssl\fR"
+Deletes the current SSL configuration.
+.
+.IP "[\fB\-\-bootstrap\fR] \fBset\-ssl\fR \fIprivate-key\fR \fIcertificate\fR \fIca-cert\fR"
+Sets the SSL configuration. The \fB\-\-bootstrap\fR option is described
+below.
+.
+.ST "CA Certificate Bootstrap"
+.PP
+Ordinarily, all of the files named in the SSL configuration must exist
+when \fBovs\-vswitchd\fR starts. However, if the \fIca-cert\fR file
+does not exist and the \fB\-\-bootstrap\fR
+option is given, then \fBovs\-vswitchd\fR will attempt to obtain the
+CA certificate from the controller on its first SSL connection and
+save it to the named PEM file. If it is successful, it will
+immediately drop the connection and reconnect, and from then on all
+SSL connections must be authenticated by a certificate signed by the
+CA certificate thus obtained.
+.PP
+\fBThis option exposes the SSL connection to a man-in-the-middle
+attack obtaining the initial CA certificate\fR, but it may be useful
+for bootstrapping.
+.PP
+This option is only useful if the controller sends its CA certificate
+as part of the SSL certificate chain. The SSL protocol does not
+require the controller to send the CA certificate.
+.
+.SS "Auto-Attach Commands"
+.
+The IETF Auto-Attach SPBM draft standard describes a compact method of using
+IEEE 802.1AB Link Layer Discovery Protocol (LLDP) together with a IEEE 802.1aq
+Shortest Path Bridging (SPB) network to automatically attach network devices to
+individual services in a SPB network. The intent here is to allow network
+applications and devices using OVS to be able to easily take advantage of
+features offered by industry standard SPB networks. A fundamental element of
+the Auto-Attach feature is to map traditional VLANs onto SPB I_SIDs. These
+commands manage the Auto-Attach I-SID/VLAN mappings.
+.
+.IP "\fBadd\-aa\-mapping \fIbridge i-sid vlan\fR"
+Creates a new Auto-Attach mapping on \fIbridge\fR for \fIi-sid\fR
+and \fIvlan\fR.
+.
+.IP "\fBdel\-aa\-mapping \fIbridge i-sid vlan\fR"
+Deletes an Auto-Attach mapping on \fIbridge\fR for \fIi-sid\fR
+and \fIvlan\fR.
+.IP "\fBget\-aa\-mapping \fIbridge\fR"
+Lists all of the Auto-Attach mappings within \fIbridge\fR on standard output.
+.
+.SS "Database Commands"
+.
+These commands query and modify the contents of \fBovsdb\fR tables.
+They are a slight abstraction of the \fBovsdb\fR interface and as such
+they operate at a lower level than other \fBovs\-vsctl\fR commands.
+.PP
+.ST "Identifying Tables, Records, and Columns"
+.PP
+Each of these commands has a \fItable\fR parameter to identify a table
+within the database. Many of them also take a \fIrecord\fR parameter
+that identifies a particular record within a table. The \fIrecord\fR
+parameter may be the UUID for a record, and many tables offer
+additional ways to identify records. Some commands also take
+\fIcolumn\fR parameters that identify a particular field within the
+records in a table.
+.PP
+The following tables are currently defined:
+.IP "\fBOpen_vSwitch\fR"
+Global configuration for an \fBovs\-vswitchd\fR. This table contains
+exactly one record, identified by specifying \fB.\fR as the record
+name.
+.IP "\fBBridge\fR"
+Configuration for a bridge within an Open vSwitch. Records may be
+identified by bridge name.
+.IP "\fBPort\fR"
+A bridge port. Records may be identified by port name.
+.IP "\fBInterface\fR"
+A network device attached to a port. Records may be identified by
+name.
+.IP "\fBFlow_Table\fR"
+Configuration for a particular OpenFlow flow table. Records may be
+identified by name.
+.IP "\fBQoS\fR"
+Quality-of-service configuration for a \fBPort\fR. Records may be
+identified by port name.
+.IP "\fBQueue\fR"
+Configuration for one queue within a \fBQoS\fR configuration. Records
+may only be identified by UUID.
+.IP "\fBMirror\fR"
+A port mirroring configuration attached to a bridge. Records may be
+identified by mirror name.
+.IP "\fBController\fR"
+Configuration for an OpenFlow controller. A controller attached to a
+particular bridge may be identified by the bridge's name.
+.IP "\fBManager\fR"
+Configuration for an OVSDB connection. Records may be identified
+by target (e.g. \fBtcp:1.2.3.4\fR).
+.IP "\fBNetFlow\fR"
+A NetFlow configuration attached to a bridge. Records may be
+identified by bridge name.
+.IP "\fBSSL\fR"
+The global SSL configuration for \fBovs\-vswitchd\fR. The record
+attached to the \fBOpen_vSwitch\fR table may be identified by
+specifying \fB.\fR as the record name.
+.IP "\fBsFlow\fR"
+An sFlow exporter configuration attached to a bridge. Records may be
+identified by bridge name.
+.IP "\fBIPFIX\fR"
+An IPFIX exporter configuration attached to a bridge. Records may be
+identified by bridge name.
+.IP "\fBFlow_Sample_Collector_Set\fR"
+An IPFIX exporter configuration attached to a bridge for sampling
+packets on a per-flow basis using OpenFlow \fBsample\fR actions.
+.IP "\fBAutoAttach\fR"
+Configuration for Auto Attach within a bridge.
+.PP
+Record names must be specified in full and with correct
+capitalization. Names of tables and columns are not case-sensitive,
+and \fB\-\-\fR and \fB_\fR are treated interchangeably. Unique
+abbreviations are acceptable, e.g. \fBnet\fR or \fBn\fR is sufficient
+to identify the \fBNetFlow\fR table.
+.
+.so lib/db-ctl-base.man
+.SH "EXAMPLES"
+Create a new bridge named br0 and add port eth0 to it:
+.IP
+.B "ovs\-vsctl add\-br br0"
+.br
+.B "ovs\-vsctl add\-port br0 eth0"
+.PP
+Alternatively, perform both operations in a single atomic transaction:
+.IP
+.B "ovs\-vsctl add\-br br0 \-\- add\-port br0 eth0"
+.PP
+Delete bridge \fBbr0\fR, reporting an error if it does not exist:
+.IP
+.B "ovs\-vsctl del\-br br0"
+.PP
+Delete bridge \fBbr0\fR if it exists:
+.IP
+.B "ovs\-vsctl \-\-if\-exists del\-br br0"
+.PP
+Set the \fBqos\fR column of the \fBPort\fR record for \fBeth0\fR to
+point to a new \fBQoS\fR record, which in turn points with its queue 0
+to a new \fBQueue\fR record:
+.IP
+.B "ovs\-vsctl \-\- set port eth0 qos=@newqos \-\- \-\-id=@newqos create qos type=linux\-htb other\-config:max\-rate=1000000 queues:0=@newqueue \-\- \-\-id=@newqueue create queue other\-config:min\-rate=1000000 other\-config:max\-rate=1000000"
+.SH "CONFIGURATION COOKBOOK"
+.SS "Port Configuration"
+.PP
+Add an ``internal port'' \fBvlan10\fR to bridge \fBbr0\fR as a VLAN
+access port for VLAN 10, and configure it with an IP address:
+.IP
+.B "ovs\-vsctl add\-port br0 vlan10 tag=10 \-\- set Interface vlan10 type=internal"
+.IP
+.B "ifconfig vlan10 192.168.0.123"
+.
+.PP
+Add a GRE tunnel port \fBgre0\fR to remote IP address 1.2.3.4 to
+bridge \fBbr0\fR:
+.IP
+.B "ovs\-vsctl add\-port br0 gre0 \-\- set Interface gre0 type=gre options:remote_ip=1.2.3.4"
+.
+.SS "Port Mirroring"
+.PP
+Mirror all packets received or sent on \fBeth0\fR or \fBeth1\fR onto
+\fBeth2\fR, assuming that all of those ports exist on bridge \fBbr0\fR
+(as a side-effect this causes any packets received on \fBeth2\fR to be
+ignored):
+.IP
+.B "ovs\-vsctl \-\- set Bridge br0 mirrors=@m \(rs"
+.IP
+.B "\-\- \-\-id=@eth0 get Port eth0 \(rs"
+.IP
+.B "\-\- \-\-id=@eth1 get Port eth1 \(rs"
+.IP
+.B "\-\- \-\-id=@eth2 get Port eth2 \(rs"
+.IP
+.B "\-\- \-\-id=@m create Mirror name=mymirror select-dst-port=@eth0,@eth1 select-src-port=@eth0,@eth1 output-port=@eth2"
+.PP
+Remove the mirror created above from \fBbr0\fR, which also destroys
+the Mirror record (since it is now unreferenced):
+.IP
+.B "ovs\-vsctl \-\- \-\-id=@rec get Mirror mymirror \(rs"
+.IP
+.B "\-\- remove Bridge br0 mirrors @rec"
+.PP
+The following simpler command also works:
+.IP
+.B "ovs\-vsctl clear Bridge br0 mirrors"
+.SS "Quality of Service (QoS)"
+.PP
+Create a \fBlinux\-htb\fR QoS record that points to a few queues and
+use it on \fBeth0\fR and \fBeth1\fR:
+.IP
+.B "ovs\-vsctl \-\- set Port eth0 qos=@newqos \(rs"
+.IP
+.B "\-\- set Port eth1 qos=@newqos \(rs"
+.IP
+.B "\-\- \-\-id=@newqos create QoS type=linux\-htb other\-config:max\-rate=1000000000 queues=0=@q0,1=@q1 \(rs"
+.IP
+.B "\-\- \-\-id=@q0 create Queue other\-config:min\-rate=100000000 other\-config:max\-rate=100000000 \(rs"
+.IP
+.B "\-\- \-\-id=@q1 create Queue other\-config:min\-rate=500000000"
+.PP
+Deconfigure the QoS record above from \fBeth1\fR only:
+.IP
+.B "ovs\-vsctl clear Port eth1 qos"
+.PP
+To deconfigure the QoS record from both \fBeth0\fR and \fBeth1\fR and
+then delete the QoS record (which must be done explicitly because
+unreferenced QoS records are not automatically destroyed):
+.IP
+.B "ovs\-vsctl \-\- destroy QoS eth0 \-\- clear Port eth0 qos \-\- clear Port eth1 qos"
+.PP
+(This command will leave two unreferenced Queue records in the
+database. To delete them, use "\fBovs\-vsctl list Queue\fR" to find
+their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR
+\fIuuid2\fR" to destroy each of them or use
+"\fBovs\-vsctl -- --all destroy Queue\fR" to delete all records.)
+.SS "Connectivity Monitoring"
+.PP
+Monitor connectivity to a remote maintenance point on eth0.
+.IP
+.B "ovs\-vsctl set Interface eth0 cfm_mpid=1"
+.PP
+Deconfigure connectivity monitoring from above:
+.IP
+.B "ovs\-vsctl clear Interface eth0 cfm_mpid"
+.SS "NetFlow"
+.PP
+Configure bridge \fBbr0\fR to send NetFlow records to UDP port 5566 on
+host 192.168.0.34, with an active timeout of 30 seconds:
+.IP
+.B "ovs\-vsctl \-\- set Bridge br0 netflow=@nf \(rs"
+.IP
+.B "\-\- \-\-id=@nf create NetFlow targets=\(rs\(dq192.168.0.34:5566\(rs\(dq active\-timeout=30"
+.PP
+Update the NetFlow configuration created by the previous command to
+instead use an active timeout of 60 seconds:
+.IP
+.B "ovs\-vsctl set NetFlow br0 active_timeout=60"
+.PP
+Deconfigure the NetFlow settings from \fBbr0\fR, which also destroys
+the NetFlow record (since it is now unreferenced):
+.IP
+.B "ovs\-vsctl clear Bridge br0 netflow"
+.SS "sFlow"
+.PP
+Configure bridge \fBbr0\fR to send sFlow records to a collector on
+10.0.0.1 at port 6343, using \fBeth1\fR\'s IP address as the source,
+with specific sampling parameters:
+.IP
+.B "ovs\-vsctl \-\- \-\-id=@s create sFlow agent=eth1 target=\(rs\(dq10.0.0.1:6343\(rs\(dq header=128 sampling=64 polling=10 \(rs"
+.IP
+.B "\-\- set Bridge br0 sflow=@s"
+.PP
+Deconfigure sFlow from \fBbr0\fR, which also destroys the sFlow record
+(since it is now unreferenced):
+.IP
+.B "ovs\-vsctl \-\- clear Bridge br0 sflow"
+.SS "IPFIX"
+.PP
+Configure bridge \fBbr0\fR to send one IPFIX flow record per packet
+sample to UDP port 4739 on host 192.168.0.34, with Observation Domain
+ID 123 and Observation Point ID 456, a flow cache active timeout of 1
+minute (60 seconds), maximum flow cache size of 13 flows, and flows
+sampled on output port with tunnel info(sampling on input and output
+port is enabled by default if not disabled) :
+.IP
+.B "ovs\-vsctl \-\- set Bridge br0 ipfix=@i \(rs"
+.IP
+.B "\-\- \-\-id=@i create IPFIX targets=\(rs\(dq192.168.0.34:4739\(rs\(dq obs_domain_id=123 obs_point_id=456 cache_active_timeout=60 cache_max_flows=13 \(rs"
+.IP
+.B "other_config:enable-input-sampling=false other_config:enable-tunnel-sampling=true"
+.PP
+Deconfigure the IPFIX settings from \fBbr0\fR, which also destroys the
+IPFIX record (since it is now unreferenced):
+.IP
+.B "ovs\-vsctl clear Bridge br0 ipfix"
+.SS "802.1D Spanning Tree Protocol (STP)"
+.PP
+Configure bridge \fBbr0\fR to participate in an 802.1D spanning tree:
+.IP
+.B "ovs\-vsctl set Bridge br0 stp_enable=true"
+.PP
+Set the bridge priority of \fBbr0\fR to 0x7800:
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:stp-priority=0x7800"
+.PP
+Set the path cost of port \fBeth0\fR to 10:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:stp-path-cost=10"
+.PP
+Deconfigure STP from above:
+.IP
+.B "ovs\-vsctl set Bridge br0 stp_enable=false"
+.PP
+.SS "Multicast Snooping"
+.PP
+Configure bridge \fBbr0\fR to enable multicast snooping:
+.IP
+.B "ovs\-vsctl set Bridge br0 mcast_snooping_enable=true"
+.PP
+Set the multicast snooping aging time \fBbr0\fR to 300 seconds:
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:mcast-snooping-aging-time=300"
+.PP
+Set the multicast snooping table size \fBbr0\fR to 2048 entries:
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:mcast-snooping-table-size=2048"
+.PP
+Disable flooding of unregistered multicast packets to all ports. When
+set to \fBtrue\fR, the switch will send unregistered multicast packets only
+to ports connected to multicast routers. When it is set to \fBfalse\fR, the
+switch will send them to all ports. This command disables the flood of
+unregistered packets on bridge \fBbr0\fR.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:mcast-snooping-disable-flood-unregistered=true"
+.PP
+Enable flooding of multicast packets (except Reports) on a specific port.
+.IP
+.B "ovs\-vsctl set Port eth1 other_config:mcast-snooping-flood=true"
+.PP
+Enable flooding of Reports on a specific port.
+.IP
+.B "ovs\-vsctl set Port eth1 other_config:mcast-snooping-flood-reports=true"
+.PP
+Deconfigure multicasting snooping from above:
+.IP
+.B "ovs\-vsctl set Bridge br0 mcast_snooping_enable=false"
+.PP
+.SS "802.1D-2004 Rapid Spanning Tree Protocol (RSTP)"
+.PP
+Configure bridge \fBbr0\fR to participate in an 802.1D-2004 Rapid Spanning Tree:
+.IP
+.B "ovs\-vsctl set Bridge br0 rstp_enable=true"
+.PP
+Set the bridge address of \fBbr0\fR to 00:aa:aa:aa:aa:aa :
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-address=00:aa:aa:aa:aa:aa"
+.PP
+Set the bridge priority of \fBbr0\fR to 0x7000. The value must be specified in
+decimal notation and should be a multiple of 4096 (if not, it is rounded down to
+the nearest multiple of 4096). The default priority value is 0x800 (32768).
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-priority=28672"
+.PP
+Set the bridge ageing time of \fBbr0\fR to 1000 s. The ageing time value should be
+between 10 s and 1000000 s. The default value is 300 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-ageing-time=1000"
+.PP
+Set the bridge force protocol version of \fBbr0\fR to 0. The force protocol version
+has two acceptable values: 0 (STP compatibility mode) and 2 (normal operation).
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-force-protocol-version=0"
+.PP
+Set the bridge max age of \fBbr0\fR to 10 s. The max age value should be between 6 s
+and 40 s. The default value is 20 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-max-age=10"
+.PP
+Set the bridge forward delay of \fBbr0\fR to 15 s.
+This value should be between 4 s and 30 s. The default value is 15 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-forward-delay=15"
+.PP
+Set the bridge transmit hold count of \fBbr0\fR to 7 s. This value should be between
+1 s and 10 s. The default value is 6 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-transmit-hold-count=7"
+.PP
+Enable RSTP on the Port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-enable=true"
+.PP
+Disable RSTP on the Port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-enable=false"
+.PP
+Set the priority of port \fBeth0\fR to 32. The value must be specified in
+decimal notation and should be a multiple of 16 (if not, it is rounded down to the
+nearest multiple of 16). The default priority value is 0x80 (128).
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-priority=32"
+.PP
+Set the port number of port \fBeth0\fR to 3:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-num=3"
+.PP
+Set the path cost of port \fBeth0\fR to 150:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-path-cost=150"
+.PP
+Set the admin edge value of port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-admin-edge=true"
+.PP
+Set the auto edge value of port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-auto-edge=true"
+.PP
+Set the admin point to point MAC value of port \fBeth0\fR. Acceptable
+values are \fB0\fR (not point-to-point), \fB1\fR (point-to-point, the
+default value) or \fB2\fR (automatic detection). The auto-detection
+mode is not currently implemented, and the value \fB2\fR has the same
+effect of \fB0\fR (not point-to-point).
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-admin-p2p-mac=1"
+.PP
+Set the admin port state value of port \fBeth0\fR. \fBtrue\fR is the
+default value.
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-admin-port-state=false"
+.PP
+Set the mcheck value of port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-mcheck=true"
+.PP
+Deconfigure RSTP from above:
+.IP
+.B "ovs\-vsctl set Bridge br0 rstp_enable=false"
+.PP
+.SS "OpenFlow Version"
+.PP
+Configure bridge \fBbr0\fR to support OpenFlow versions 1.0, 1.2, and
+1.3:
+.IP
+.B "ovs\-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow12,OpenFlow13"
+.
+.SS "Flow Table Configuration"
+Limit flow table 0 on bridge br0 to a maximum of 100 flows:
+.IP
+.B "ovs\-vsctl \-\- \-\-id=@ft create Flow_Table flow_limit=100 overflow_policy=refuse \-\- set Bridge br0 flow_tables=0=@ft"
.SH "EXIT STATUS"
.IP "0"
Successful program execution.
bridge that does not exist.
.SH "SEE ALSO"
.
-.BR ovs\-vswitchd.conf (5),
-.BR ovs\-vswitchd (8).
+.BR ovsdb\-server (1),
+.BR ovs\-vswitchd (8),
+.BR ovs\-vswitchd.conf.db (5).
projects / cascardo / ovs.git / blobdiff