. ns
. IP "\\$1"
..
-.TH ovs\-vswitchd 8 "June 2009" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-vswitchd 8 "@VERSION@" "Open vSwitch" "Open vSwitch Manual"
.\" This program's name:
.ds PN ovs\-vswitchd
-.\" SSL peer program's name:
-.ds SN ovs\-controller
.
.SH NAME
ovs\-vswitchd \- Open vSwitch daemon
the database changes, \fBovs\-vswitchd\fR automatically updates its
configuration to match.
.PP
-Upon receipt of a SIGHUP signal, \fBovs\-vswitchd\fR reopens its log
-file, if one was specified on the command line.
-.PP
\fBovs\-vswitchd\fR switches may be configured with any of the following
features:
.
\fBovs\-vswitchd\fR emits a log message if \fBmlockall()\fR is
unavailable or unsuccessful.
.
+.SS "DPDK Options"
+.IP "\fB\-\-dpdk\fR"
+Initialize \fBovs\-vswitchd\fR DPDK datapath. Refer to INSTALL.DPDK
+for details.
+.SS "Daemon Options"
.ds DD \
\fBovs\-vswitchd\fR detaches only after it has connected to the \
database, retrieved the initial configuration, and set up that \
configuration.
.so lib/daemon.man
+.SS "Service Options"
+.so lib/service.man
.SS "Public Key Infrastructure Options"
.so lib/ssl.man
.so lib/ssl-bootstrap.man
+.SS "Logging Options"
.so lib/vlog.man
+.SS "Other Options"
+.so lib/unixctl.man
.so lib/common.man
-.so lib/leak-checker.man
.
.SH "RUNTIME MANAGEMENT COMMANDS"
\fBovs\-appctl\fR(8) can send commands to a running
.SS "GENERAL COMMANDS"
.IP "\fBexit\fR"
Causes \fBovs\-vswitchd\fR to gracefully terminate.
-.IP "\fBcoverage/log\fR"
-Logs coverage counters at level warn.
.IP "\fBqos/show\fR \fIinterface\fR"
Queries the kernel for Quality of Service configuration and statistics
associated with the given \fIinterface\fR.
+.IP "\fBbfd/show\fR [\fIinterface\fR]"
+Displays detailed information about Bidirectional Forwarding Detection
+configured on \fIinterface\fR. If \fIinterface\fR is not specified,
+then displays detailed information about all interfaces with BFD
+enabled.
+.IP "\fBbfd/set-forwarding\fR [\fIinterface\fR] \fIstatus\fR"
+Force the fault status of the BFD module on \fIinterface\fR (or all
+interfaces if none is given) to be \fIstatus\fR. \fIstatus\fR can be
+"true", "false", or "normal" which reverts to the standard behavior.
.IP "\fBcfm/show\fR [\fIinterface\fR]"
Displays detailed information about Connectivity Fault Management
configured on \fIinterface\fR. If \fIinterface\fR is not specified,
then displays detailed information about all interfaces with CFM
enabled.
+.IP "\fBcfm/set-fault\fR [\fIinterface\fR] \fIstatus\fR"
+Force the fault status of the CFM module on \fIinterface\fR (or all
+interfaces if none is given) to be \fIstatus\fR. \fIstatus\fR can be
+"true", "false", or "normal" which reverts to the standard behavior.
+.IP "\fBstp/tcn\fR [\fIbridge\fR]"
+Forces a topology change event on \fIbridge\fR if it's running STP. This
+may cause it to send Topology Change Notifications to its peers and flush
+its MAC table.. If no \fIbridge\fR is given, forces a topology change
+event on all bridges.
.SS "BRIDGE COMMANDS"
These commands manage bridges.
+.IP "\fBfdb/flush\fR [\fIbridge\fR]"
+Flushes \fIbridge\fR MAC address learning table, or all learning tables
+if no \fIbridge\fR is given.
.IP "\fBfdb/show\fR \fIbridge\fR"
Lists each MAC address/VLAN pair learned by the specified \fIbridge\fR,
along with the port on which it was learned and the age of the entry,
in seconds.
+.IP "\fBmdb/flush\fR [\fIbridge\fR]"
+Flushes \fIbridge\fR multicast snooping table, or all snooping tables
+if no \fIbridge\fR is given.
+.IP "\fBmdb/show\fR \fIbridge\fR"
+Lists each multicast group/VLAN pair learned by the specified \fIbridge\fR,
+along with the port on which it was learned and the age of the entry,
+in seconds.
.IP "\fBbridge/reconnect\fR [\fIbridge\fR]"
Makes \fIbridge\fR drop all of its OpenFlow controller connections and
reconnect. If \fIbridge\fR is not specified, then all bridges drop
.IP "\fBbond/list\fR"
Lists all of the bonds, and their slaves, on each bridge.
.
-.IP "\fBbond/show\fR \fIport\fR"
-Lists all of the bond-specific information about the given bonded
-\fIport\fR: updelay, downdelay, time until the next rebalance. Also
-lists information about each slave: whether it is enabled or disabled,
-the time to completion of an updelay or downdelay if one is in
-progress, whether it is the active slave, the MAC hashes assigned to
-the slave, and the MAC learning table entries that hash to each MAC.
-Any LACP information related to this bond may be found using the
-\fBlacp/show\fR command.
+.IP "\fBbond/show\fR [\fIport\fR]"
+Lists all of the bond-specific information (updelay, downdelay, time
+until the next rebalance) about the given bonded \fIport\fR, or all
+bonded ports if no \fIport\fR is given. Also lists information about
+each slave: whether it is enabled or disabled, the time to completion
+of an updelay or downdelay if one is in progress, whether it is the
+active slave, the hashes assigned to the slave. Any LACP information
+related to this bond may be found using the \fBlacp/show\fR command.
+.
.IP "\fBbond/migrate\fR \fIport\fR \fIhash\fR \fIslave\fR"
Only valid for SLB bonds. Assigns a given MAC hash to a new slave.
\fIport\fR specifies the bond port, \fIhash\fR the MAC hash to be
information, and partner information. If \fIport\fR is not specified,
then displays detailed information about all interfaces with CFM
enabled.
+.SS "DPCTL DATAPATH DEBUGGING COMMANDS"
+The primary way to configure \fBovs\-vswitchd\fR is through the Open
+vSwitch database, e.g. using \fBovs\-vsctl\fR(8). These commands
+provide a debugging interface for managing datapaths. They implement
+the same features (and syntax) as \fBovs\-dpctl\fR(8). Unlike
+\fBovs\-dpctl\fR(8), these commands work with datapaths that are
+integrated into \fBovs\-vswitchd\fR (e.g. the \fBnetdev\fR datapath
+type).
+.PP
+.
+.ds DX \fBdpctl/\fR
+.de DO
+\\$2 \\$1 \\$3
+..
+.so lib/dpctl.man
.
+.SS "DPIF-NETDEV COMMANDS"
+These commands are used to expose internal information (mostly statistics)
+about the ``dpif-netdev'' userspace datapath. If there is only one datapath
+(as is often the case, unless \fBdpctl/\fR commands are used), the \fIdp\fR
+argument can be omitted.
+.IP "\fBdpif-netdev/pmd-stats-show\fR [\fIdp\fR]"
+Shows performance statistics for each pmd thread of the datapath \fIdp\fR.
+The special thread ``main'' sums up the statistics of every non pmd thread.
+The sum of ``emc hits'', ``masked hits'' and ``miss'' is the number of
+packets received by the datapath. Cycles are counted using the TSC or similar
+facilities (when available on the platform). To reset these counters use
+\fBdpif-netdev/pmd-stats-clear\fR. The duration of one cycle depends on the
+measuring infrastructure.
+.IP "\fBdpif-netdev/pmd-stats-clear\fR [\fIdp\fR]"
+Resets to zero the per pmd thread performance numbers shown by the
+\fBdpif-netdev/pmd-stats-show\fR command. It will NOT reset datapath or
+bridge statistics, only the values shown by the above command.
+.IP "\fBdpif-netdev/pmd-rxq-show\fR [\fIdp\fR]"
+For each pmd thread of the datapath \fIdp\fR shows list of queue-ids with
+port names, which this thread polls.
+.
+.so ofproto/ofproto-dpif-unixctl.man
.so ofproto/ofproto-unixctl.man
.so lib/vlog-unixctl.man
-.so lib/stress-unixctl.man
+.so lib/memory-unixctl.man
+.so lib/coverage-unixctl.man
+.so ofproto/ofproto-tnl-unixctl.man
+.
+.SH "OPENFLOW IMPLEMENTATION"
+.
+.PP
+This section documents aspects of OpenFlow for which the OpenFlow
+specification requires documentation.
+.
+.SS "Packet buffering."
+The OpenFlow specification, version 1.2, says:
+.
+.IP
+Switches that implement buffering are expected to expose, through
+documentation, both the amount of available buffering, and the length
+of time before buffers may be reused.
+.
+.PP
+Open vSwitch maintains a separate set of 256 packet buffers for each
+OpenFlow connection. Any given packet buffer is preserved until it is
+referenced by an \fBOFPT_FLOW_MOD\fR or \fBOFPT_PACKET_OUT\fR request
+or for 5 seconds, whichever comes first.
+.
+.SH "LIMITS"
+.
+.PP
+We believe these limits to be accurate as of this writing. These
+limits assume the use of the Linux kernel datapath.
+.
+.IP \(bu
+\fBovs\-vswitchd\fR started through \fBovs\-ctl\fR(8) provides a limit of 65535
+file descriptors. The limits on the number of bridges and ports is decided by
+the availability of file descriptors. With the Linux kernel datapath, creation
+of a single bridge consumes three file descriptors and adding a port consumes
+"n-handler-threads" file descriptors per bridge port. Performance will degrade
+beyond 1,024 ports per bridge due to fixed hash table sizing. Other platforms
+may have different limitations.
+.
+.IP \(bu
+2,048 MAC learning entries per bridge, by default. (This is
+configurable via \fBother\-config:mac\-table\-size\fR in the
+\fBBridge\fR table. See \fBovs\-vswitchd.conf.db\fR(5) for details.)
+.
+.IP \(bu
+Kernel flows are limited only by memory available to the kernel.
+Performance will degrade beyond 1,048,576 kernel flows per bridge with
+a 32-bit kernel, beyond 262,144 with a 64-bit kernel.
+(\fBovs\-vswitchd\fR should never install anywhere near that many
+flows.)
+.
+.IP \(bu
+OpenFlow flows are limited only by available memory. Performance is
+linear in the number of unique wildcard patterns. That is, an
+OpenFlow table that contains many flows that all match on the same
+fields in the same way has a constant-time lookup, but a table that
+contains many flows that match on different fields requires lookup
+time linear in the number of flows.
+.
+.IP \(bu
+255 ports per bridge participating in 802.1D Spanning Tree Protocol.
+.
+.IP \(bu
+32 mirrors per bridge.
+.
+.IP \(bu
+15 bytes for the name of a port. (This is a Linux kernel limitation.)
+.
.SH "SEE ALSO"
.BR ovs\-appctl (8),
-.BR ovs\-brcompatd (8),
.BR ovsdb\-server (1),
\fBINSTALL.Linux\fR in the Open vSwitch distribution.