X-Git-Url: http://git.cascardo.eti.br/?a=blobdiff_plain;f=drivers%2Fisdn%2Fhisax%2Fsedlbauer_cs.c;h=9e5c4fd08671c7460db2bbeee017f6a1de7d7042;hb=2e9b981a7c63ee8278df6823f8389d69dad1a499;hp=a024192b672a3113c0e6663fc1778c5abe4ac6f2;hpb=2f9e825d3e0e2b407ae8f082de5c00afcf7378fb;p=cascardo%2Flinux.git

diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index a024192b672a..9e5c4fd08671 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -129,11 +128,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
     /* from old sedl_cs 
     */
     /* The io structure describes IO port mapping */
-    link->resource[0]->end = 8;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
-    link->conf.Attributes = 0;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     return sedlbauer_config(link);
 } /* sedlbauer_attach */
@@ -165,59 +159,13 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link)
     device available to the system.
     
 ======================================================================*/
-static int sedlbauer_config_check(struct pcmcia_device *p_dev,
-				  cistpl_cftable_entry_t *cfg,
-				  cistpl_cftable_entry_t *dflt,
-				  unsigned int vcc,
-				  void *priv_data)
+static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
-			return -ENODEV;
-	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
-			return -ENODEV;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		p_dev->io_lines = 3;
-		if (pcmcia_request_io(p_dev) != 0)
-			return -ENODEV;
-	}
-
-	return 0;
+	p_dev->io_lines = 3;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -229,6 +177,9 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
 
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
+	    CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
     /*
       In this loop, we scan the CIS for configuration table entries,
       each of which describes a valid card configuration, including
@@ -250,23 +201,10 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
        the I/O windows and the interrupt mapping, and putting the
        card and host interface into "Memory and IO" mode.
     */
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
-    /* Finally, report what we've done */
-    dev_info(&link->dev, "index 0x%02x:",
-	   link->conf.ConfigIndex);
-    if (link->conf.Vpp)
-	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
-    if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	printk(", irq %d", link->irq);
-    if (link->resource[0])
-	printk(" & %pR", link->resource[0]);
-    if (link->resource[1])
-	printk(" & %pR", link->resource[1]);
-    printk("\n");
-
     icard.para[0] = link->irq;
     icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
@@ -346,9 +284,7 @@ MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);
 
 static struct pcmcia_driver sedlbauer_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "sedlbauer_cs",
-	},
+	.name		= "sedlbauer_cs",
 	.probe		= sedlbauer_probe,
 	.remove		= __devexit_p(sedlbauer_detach),
 	.id_table	= sedlbauer_ids,