X-Git-Url: http://git.cascardo.eti.br/?a=blobdiff_plain;f=include%2Fasm-x86%2Fserial.h;h=628c801535ea912c00a57654310a832acca2e67f;hb=8ffa5b65968262ba6bb046329972791c0d960745;hp=cf1b05227b29ea26f614440050d4712d210032da;hpb=547307420931344a868275bd7ea7a30f117a15a9;p=cascardo%2Flinux.git

diff --git a/include/asm-x86/serial.h b/include/asm-x86/serial.h
index cf1b05227b29..628c801535ea 100644
--- a/include/asm-x86/serial.h
+++ b/include/asm-x86/serial.h
@@ -1,5 +1,29 @@
-#ifdef CONFIG_X86_32
-# include "serial_32.h"
+#ifndef _ASM_X86_SERIAL_H
+#define _ASM_X86_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
 #else
-# include "serial_64.h"
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
+
+#define SERIAL_PORT_DFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+#endif /* _ASM_X86_SERIAL_H */