X-Git-Url: http://git.cascardo.eti.br/?a=blobdiff_plain;f=include%2Fnet%2Fmac80211.h;h=be30b0549b881847adfc45cba4303e6bae82d060;hb=46fa38e84b656f80edf83d21144221b0cad18d61;hp=e385eb3076a1a7241349f3f72d160aa39f2b0df7;hpb=6a7c924314dd1b4facfccc682011622c15e71ea3;p=cascardo%2Flinux.git diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e385eb3076a1..be30b0549b88 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -291,7 +291,7 @@ struct ieee80211_vif_chanctx_switch { * @BSS_CHANGED_PS: PS changed for this BSS (STA mode) * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS) - * changed (currently only in P2P client mode, GO mode will be later) + * changed * @BSS_CHANGED_BEACON_INFO: Data from the AP's beacon became available: * currently dtim_period only is under consideration. * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed, @@ -526,6 +526,9 @@ struct ieee80211_mu_group_data { * userspace), whereas TPC is disabled if %txpower_type is set to * NL80211_TX_POWER_FIXED (use value configured from userspace) * @p2p_noa_attr: P2P NoA attribute for P2P powersave + * @allow_p2p_go_ps: indication for AP or P2P GO interface, whether it's allowed + * to use P2P PS mechanism or not. AP/P2P GO is not allowed to use P2P PS + * if it has associated clients without P2P PS support. */ struct ieee80211_bss_conf { const u8 *bssid; @@ -546,7 +549,7 @@ struct ieee80211_bss_conf { u8 sync_dtim_count; u32 basic_rates; struct ieee80211_rate *beacon_rate; - int mcast_rate[IEEE80211_NUM_BANDS]; + int mcast_rate[NUM_NL80211_BANDS]; u16 ht_operation_mode; s32 cqm_rssi_thold; u32 cqm_rssi_hyst; @@ -563,6 +566,7 @@ struct ieee80211_bss_conf { int txpower; enum nl80211_tx_power_setting txpower_type; struct ieee80211_p2p_noa_attr p2p_noa_attr; + bool allow_p2p_go_ps; }; /** @@ -709,6 +713,7 @@ enum mac80211_tx_info_flags { * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll * frame (PS-Poll or uAPSD). * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information + * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame * * These flags are used in tx_info->control.flags. */ @@ -716,6 +721,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1), IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), + IEEE80211_TX_CTRL_AMSDU = BIT(3), }; /* @@ -932,8 +938,8 @@ struct ieee80211_tx_info { * @common_ie_len: length of the common_ies */ struct ieee80211_scan_ies { - const u8 *ies[IEEE80211_NUM_BANDS]; - size_t len[IEEE80211_NUM_BANDS]; + const u8 *ies[NUM_NL80211_BANDS]; + size_t len[NUM_NL80211_BANDS]; const u8 *common_ies; size_t common_ie_len; }; @@ -1036,6 +1042,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * on this subframe * @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC * is stored in the @ampdu_delimiter_crc field) + * @RX_FLAG_MIC_STRIPPED: The mic was stripped of this packet. Decryption was + * done by the hardware * @RX_FLAG_LDPC: LDPC was used * @RX_FLAG_ONLY_MONITOR: Report frame only to monitor interfaces without * processing it in any regular way. @@ -1060,6 +1068,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_RADIOTAP_VENDOR_DATA: This frame contains vendor-specific * radiotap data in the skb->data (before the frame) as described by * the &struct ieee80211_vendor_radiotap. + * @RX_FLAG_ALLOW_SAME_PN: Allow the same PN as same packet before. + * This is used for AMSDU subframes which can have the same PN as + * the first subframe. */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = BIT(0), @@ -1093,6 +1104,8 @@ enum mac80211_rx_flags { RX_FLAG_5MHZ = BIT(29), RX_FLAG_AMSDU_MORE = BIT(30), RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31), + RX_FLAG_MIC_STRIPPED = BIT_ULL(32), + RX_FLAG_ALLOW_SAME_PN = BIT_ULL(33), }; #define RX_FLAG_STBC_SHIFT 26 @@ -1122,6 +1135,8 @@ enum mac80211_rx_vht_flags { * * @mactime: value in microseconds of the 64-bit Time Synchronization Function * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. + * @boottime_ns: CLOCK_BOOTTIME timestamp the frame was received at, this is + * needed only for beacons and probe responses that update the scan cache. * @device_timestamp: arbitrary timestamp for the device, mac80211 doesn't use * it but can store it and pass it back to the driver for synchronisation * @band: the active band when this frame was received @@ -1148,9 +1163,10 @@ enum mac80211_rx_vht_flags { */ struct ieee80211_rx_status { u64 mactime; + u64 boottime_ns; u32 device_timestamp; u32 ampdu_reference; - u32 flag; + u64 flag; u16 freq; u8 vht_flag; u8 rate_idx; @@ -1737,10 +1753,12 @@ struct ieee80211_sta_rates { * size is min(max_amsdu_len, 7935) bytes. * Both additional HT limits must be enforced by the low level driver. * This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2). + * @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not. + * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control. * @txq: per-TID data TX queues (if driver uses the TXQ abstraction) */ struct ieee80211_sta { - u32 supp_rates[IEEE80211_NUM_BANDS]; + u32 supp_rates[NUM_NL80211_BANDS]; u8 addr[ETH_ALEN]; u16 aid; struct ieee80211_sta_ht_cap ht_cap; @@ -1757,6 +1775,8 @@ struct ieee80211_sta { bool mfp; u8 max_amsdu_subframes; u16 max_amsdu_len; + bool support_p2p_ps; + u16 max_rc_amsdu_len; struct ieee80211_txq *txq[IEEE80211_NUM_TIDS]; @@ -1970,6 +1990,18 @@ struct ieee80211_txq { * order and does not need to manage its own reorder buffer or BA session * timeout. * + * @IEEE80211_HW_USES_RSS: The device uses RSS and thus requires parallel RX, + * which implies using per-CPU station statistics. + * + * @IEEE80211_HW_TX_AMSDU: Hardware (or driver) supports software aggregated + * A-MSDU frames. Requires software tx queueing and fast-xmit support. + * When not using minstrel/minstrel_ht rate control, the driver must + * limit the maximum A-MSDU size based on the current tx rate by setting + * max_rc_amsdu_len in struct ieee80211_sta. + * + * @IEEE80211_HW_TX_FRAG_LIST: Hardware (or driver) supports sending frag_list + * skbs, needed for zero-copy software A-MSDU. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2007,6 +2039,9 @@ enum ieee80211_hw_flags { IEEE80211_HW_BEACON_TX_STATUS, IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR, IEEE80211_HW_SUPPORTS_REORDERING_BUFFER, + IEEE80211_HW_USES_RSS, + IEEE80211_HW_TX_AMSDU, + IEEE80211_HW_TX_FRAG_LIST, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -2079,6 +2114,9 @@ enum ieee80211_hw_flags { * size is smaller (an example is LinkSys WRT120N with FW v1.0.07 * build 002 Jun 18 2012). * + * @max_tx_fragments: maximum number of tx buffers per (A)-MSDU, sum + * of 1 + skb_shinfo(skb)->nr_frags for each skb in the frag_list. + * * @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX * (if %IEEE80211_HW_QUEUE_CONTROL is set) * @@ -2133,6 +2171,7 @@ struct ieee80211_hw { u8 max_rate_tries; u8 max_rx_aggregation_subframes; u8 max_tx_aggregation_subframes; + u8 max_tx_fragments; u8 offchannel_tx_hw_queue; u8 radiotap_mcs_details; u16 radiotap_vht_details; @@ -3350,6 +3389,10 @@ enum ieee80211_reconfig_type { * the function call. * * @wake_tx_queue: Called when new packets have been added to the queue. + * @sync_rx_queues: Process all pending frames in RSS queues. This is a + * synchronization which is needed in case driver has in its RSS queues + * pending frames that were received prior to the control path action + * currently taken (e.g. disassociation) but are not processed yet. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -3587,6 +3630,7 @@ struct ieee80211_ops { void (*wake_tx_queue)(struct ieee80211_hw *hw, struct ieee80211_txq *txq); + void (*sync_rx_queues)(struct ieee80211_hw *hw); }; /** @@ -3840,11 +3884,12 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw); * This function must be called with BHs disabled. * * @hw: the hardware this frame came in on + * @sta: the station the frame was received from, or %NULL * @skb: the buffer to receive, owned by mac80211 after this call * @napi: the NAPI context */ -void ieee80211_rx_napi(struct ieee80211_hw *hw, struct sk_buff *skb, - struct napi_struct *napi); +void ieee80211_rx_napi(struct ieee80211_hw *hw, struct ieee80211_sta *sta, + struct sk_buff *skb, struct napi_struct *napi); /** * ieee80211_rx - receive frame @@ -3868,7 +3913,7 @@ void ieee80211_rx_napi(struct ieee80211_hw *hw, struct sk_buff *skb, */ static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb) { - ieee80211_rx_napi(hw, skb, NULL); + ieee80211_rx_napi(hw, NULL, skb, NULL); } /** @@ -3951,6 +3996,33 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta, return ret; } +/** + * ieee80211_sta_pspoll - PS-Poll frame received + * @sta: currently connected station + * + * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS flag set, + * use this function to inform mac80211 that a PS-Poll frame from a + * connected station was received. + * This must be used in conjunction with ieee80211_sta_ps_transition() + * and possibly ieee80211_sta_uapsd_trigger(); calls to all three must + * be serialized. + */ +void ieee80211_sta_pspoll(struct ieee80211_sta *sta); + +/** + * ieee80211_sta_uapsd_trigger - (potential) U-APSD trigger frame received + * @sta: currently connected station + * @tid: TID of the received (potential) trigger frame + * + * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS flag set, + * use this function to inform mac80211 that a (potential) trigger frame + * from a connected station was received. + * This must be used in conjunction with ieee80211_sta_ps_transition() + * and possibly ieee80211_sta_pspoll(); calls to all three must be + * serialized. + */ +void ieee80211_sta_uapsd_trigger(struct ieee80211_sta *sta, u8 tid); + /* * The TX headroom reserved by mac80211 for its own tx_status functions. * This is enough for the radiotap header. @@ -4363,7 +4435,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, */ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - enum ieee80211_band band, + enum nl80211_band band, size_t frame_len, struct ieee80211_rate *rate); @@ -5316,7 +5388,7 @@ struct rate_control_ops { }; static inline int rate_supported(struct ieee80211_sta *sta, - enum ieee80211_band band, + enum nl80211_band band, int index) { return (sta == NULL || sta->supp_rates[band] & BIT(index));