select GENERIC_PCI_IOMAP
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
select IRQ_DOMAIN
select HAVE_OPROFILE
If in doubt, say Y.
+config HIGHMEM
+ bool "High Memory Support"
+ help
+ Linux can use the full amount of RAM in the system by
+ default. However, the default MMUv2 setup only maps the
+ lowermost 128 MB of memory linearly to the areas starting
+ at 0xd0000000 (cached) and 0xd8000000 (uncached).
+ When there are more than 128 MB memory in the system not
+ all of it can be "permanently mapped" by the kernel.
+ The physical memory that's not permanently mapped is called
+ "high memory".
+
+ If you are compiling a kernel which will never run on a
+ machine with more than 128 MB total physical RAM, answer
+ N here.
+
+ If unsure, say Y.
+
endmenu
config XTENSA_CALIBRATE_CCOUNT
config XTENSA_PLATFORM_ISS
bool "ISS"
- depends on TTY
select XTENSA_CALIBRATE_CCOUNT
select SERIAL_CONSOLE
help
--- /dev/null
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-128m.dtsi"
+
+/ {
+ compatible = "cdns,xtensa-kc705";
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+};
--- /dev/null
+/ {
+ soc {
+ flash: flash@00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x00000000 0x08000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ partition@0x0 {
+ label = "data";
+ reg = <0x00000000 0x06000000>;
+ };
+ partition@0x6000000 {
+ label = "boot loader area";
+ reg = <0x06000000 0x00800000>;
+ };
+ partition@0x6800000 {
+ label = "kernel image";
+ reg = <0x06800000 0x017e0000>;
+ };
+ partition@0x7fe0000 {
+ label = "boot environment";
+ reg = <0x07fe0000 0x00020000>;
+ };
+ };
+ };
+};
/ {
- flash: flash@f8000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0xf8000000 0x01000000>;
- bank-width = <2>;
- device-width = <2>;
- partition@0x0 {
- label = "boot loader area";
- reg = <0x00000000 0x00400000>;
+ soc {
+ flash: flash@08000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x08000000 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ partition@0x0 {
+ label = "boot loader area";
+ reg = <0x00000000 0x00400000>;
+ };
+ partition@0x400000 {
+ label = "kernel image";
+ reg = <0x00400000 0x00600000>;
+ };
+ partition@0xa00000 {
+ label = "data";
+ reg = <0x00a00000 0x005e0000>;
+ };
+ partition@0xfe0000 {
+ label = "boot environment";
+ reg = <0x00fe0000 0x00020000>;
+ };
};
- partition@0x400000 {
- label = "kernel image";
- reg = <0x00400000 0x00600000>;
- };
- partition@0xa00000 {
- label = "data";
- reg = <0x00a00000 0x005e0000>;
- };
- partition@0xfe0000 {
- label = "boot environment";
- reg = <0x00fe0000 0x00020000>;
- };
- };
+ };
};
/ {
- flash: flash@f8000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0xf8000000 0x00400000>;
- bank-width = <2>;
- device-width = <2>;
- partition@0x0 {
- label = "boot loader area";
- reg = <0x00000000 0x003f0000>;
+ soc {
+ flash: flash@08000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x08000000 0x00400000>;
+ bank-width = <2>;
+ device-width = <2>;
+ partition@0x0 {
+ label = "boot loader area";
+ reg = <0x00000000 0x003f0000>;
+ };
+ partition@0x3f0000 {
+ label = "boot environment";
+ reg = <0x003f0000 0x00010000>;
+ };
};
- partition@0x3f0000 {
- label = "boot environment";
- reg = <0x003f0000 0x00010000>;
- };
- };
+ };
};
};
};
- serial0: serial@fd050020 {
- device_type = "serial";
- compatible = "ns16550a";
- no-loopback-test;
- reg = <0xfd050020 0x20>;
- reg-shift = <2>;
- interrupts = <0 1>; /* external irq 0 */
- clocks = <&osc>;
- };
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xf0000000 0x10000000>;
- enet0: ethoc@fd030000 {
- compatible = "opencores,ethoc";
- reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
- interrupts = <1 1>; /* external irq 1 */
- local-mac-address = [00 50 c2 13 6f 00];
- clocks = <&osc>;
+ serial0: serial@0d050020 {
+ device_type = "serial";
+ compatible = "ns16550a";
+ no-loopback-test;
+ reg = <0x0d050020 0x20>;
+ reg-shift = <2>;
+ interrupts = <0 1>; /* external irq 0 */
+ clocks = <&osc>;
+ };
+
+ enet0: ethoc@0d030000 {
+ compatible = "opencores,ethoc";
+ reg = <0x0d030000 0x4000 0x0d800000 0x4000>;
+ interrupts = <1 1>; /* external irq 1 */
+ local-mac-address = [00 50 c2 13 6f 00];
+ clocks = <&osc>;
+ };
};
};
unsigned long data[0]; /* data */
} bp_tag_t;
-typedef struct meminfo {
+struct bp_meminfo {
unsigned long type;
unsigned long start;
unsigned long end;
-} meminfo_t;
-
-#define SYSMEM_BANKS_MAX 5
+};
#define MEMORY_TYPE_CONVENTIONAL 0x1000
#define MEMORY_TYPE_NONE 0x2000
-typedef struct sysmem_info {
- int nr_banks;
- meminfo_t bank[SYSMEM_BANKS_MAX];
-} sysmem_info_t;
-
-extern sysmem_info_t sysmem;
-
#endif
#endif
--- /dev/null
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <asm/pgtable.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of the consistent memory region backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * higher than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+ /* reserved pte's for temporary kernel mappings */
+ FIX_KMAP_BEGIN,
+ FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * NR_CPUS) - 1,
+#endif
+ __end_of_fixed_addresses
+};
+
+#define FIXADDR_TOP (VMALLOC_START - PAGE_SIZE)
+#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START ((FIXADDR_TOP - FIXADDR_SIZE) & PMD_MASK)
+
+#include <asm-generic/fixmap.h>
+
+#define kmap_get_fixmap_pte(vaddr) \
+ pte_offset_kernel( \
+ pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), \
+ (vaddr) \
+ )
+
+#endif
* this archive for more details.
*
* Copyright (C) 2003 - 2005 Tensilica Inc.
+ * Copyright (C) 2014 Cadence Design Systems Inc.
*/
#ifndef _XTENSA_HIGHMEM_H
#define _XTENSA_HIGHMEM_H
-extern void flush_cache_kmaps(void);
+#include <asm/cacheflush.h>
+#include <asm/fixmap.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+#define PKMAP_BASE (FIXADDR_START - PMD_SIZE)
+#define LAST_PKMAP PTRS_PER_PTE
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define kmap_prot PAGE_KERNEL
+
+extern pte_t *pkmap_page_table;
+
+void *kmap_high(struct page *page);
+void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return page_address(page);
+ return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+
+static inline void flush_cache_kmaps(void)
+{
+ flush_cache_all();
+}
+
+void *kmap_atomic(struct page *page);
+void __kunmap_atomic(void *kvaddr);
+
+void kmap_init(void);
#endif
update_pte(ptep, pteval);
}
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+ update_pte(ptep, pteval);
+}
static inline void
set_pmd(pmd_t *pmdp, pmd_t pmdval)
--- /dev/null
+/*
+ * sysmem-related prototypes.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014 Cadence Design Systems Inc.
+ */
+
+#ifndef _XTENSA_SYSMEM_H
+#define _XTENSA_SYSMEM_H
+
+#define SYSMEM_BANKS_MAX 31
+
+struct meminfo {
+ unsigned long start;
+ unsigned long end;
+};
+
+/*
+ * Bank array is sorted by .start.
+ * Banks don't overlap and there's at least one page gap
+ * between adjacent bank entries.
+ */
+struct sysmem_info {
+ int nr_banks;
+ struct meminfo bank[SYSMEM_BANKS_MAX];
+};
+
+extern struct sysmem_info sysmem;
+
+int add_sysmem_bank(unsigned long start, unsigned long end);
+int mem_reserve(unsigned long, unsigned long, int);
+void bootmem_init(void);
+void zones_init(void);
+
+#endif /* _XTENSA_SYSMEM_H */
unsigned long page);
void local_flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
#ifdef CONFIG_SMP
void flush_tlb_page(struct vm_area_struct *, unsigned long);
void flush_tlb_range(struct vm_area_struct *, unsigned long,
unsigned long);
-
-static inline void flush_tlb_kernel_range(unsigned long start,
- unsigned long end)
-{
- flush_tlb_all();
-}
+void flush_tlb_kernel_range(unsigned long start, unsigned long end);
#else /* !CONFIG_SMP */
#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
#define flush_tlb_range(vma, vmaddr, end) local_flush_tlb_range(vma, vmaddr, \
end)
-#define flush_tlb_kernel_range(start, end) local_flush_tlb_all()
+#define flush_tlb_kernel_range(start, end) local_flush_tlb_kernel_range(start, \
+ end)
#endif /* CONFIG_SMP */
#include <asm/param.h>
#include <asm/traps.h>
#include <asm/smp.h>
+#include <asm/sysmem.h>
#include <platform/hardware.h>
static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
#endif
-sysmem_info_t __initdata sysmem;
-
-extern int mem_reserve(unsigned long, unsigned long, int);
-extern void bootmem_init(void);
-extern void zones_init(void);
-
/*
* Boot parameter parsing.
*
/* parse current tag */
-static int __init add_sysmem_bank(unsigned long type, unsigned long start,
- unsigned long end)
-{
- if (sysmem.nr_banks >= SYSMEM_BANKS_MAX) {
- printk(KERN_WARNING
- "Ignoring memory bank 0x%08lx size %ldKB\n",
- start, end - start);
- return -EINVAL;
- }
- sysmem.bank[sysmem.nr_banks].type = type;
- sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(start);
- sysmem.bank[sysmem.nr_banks].end = end & PAGE_MASK;
- sysmem.nr_banks++;
-
- return 0;
-}
-
static int __init parse_tag_mem(const bp_tag_t *tag)
{
- meminfo_t *mi = (meminfo_t *)(tag->data);
+ struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
if (mi->type != MEMORY_TYPE_CONVENTIONAL)
return -1;
- return add_sysmem_bank(mi->type, mi->start, mi->end);
+ return add_sysmem_bank(mi->start, mi->end);
}
__tagtable(BP_TAG_MEMORY, parse_tag_mem);
static int __init parse_tag_initrd(const bp_tag_t* tag)
{
- meminfo_t* mi;
- mi = (meminfo_t*)(tag->data);
+ struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
+
initrd_start = (unsigned long)__va(mi->start);
initrd_end = (unsigned long)__va(mi->end);
return;
size &= PAGE_MASK;
- add_sysmem_bank(MEMORY_TYPE_CONVENTIONAL, base, base + size);
+ add_sysmem_bank(base, base + size);
}
void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
void __init init_arch(bp_tag_t *bp_start)
{
- sysmem.nr_banks = 0;
-
/* Parse boot parameters */
if (bp_start)
#endif
if (sysmem.nr_banks == 0) {
- sysmem.nr_banks = 1;
- sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START;
- sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START
- + PLATFORM_DEFAULT_MEM_SIZE;
+ add_sysmem_bank(PLATFORM_DEFAULT_MEM_START,
+ PLATFORM_DEFAULT_MEM_START +
+ PLATFORM_DEFAULT_MEM_SIZE);
}
#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start < initrd_end) {
initrd_is_mapped = mem_reserve(__pa(initrd_start),
- __pa(initrd_end), 0);
+ __pa(initrd_end), 0) == 0;
initrd_below_start_ok = 1;
} else {
initrd_start = 0;
__pa(&_Level6InterruptVector_text_end), 0);
#endif
+ parse_early_param();
bootmem_init();
unflatten_and_copy_device_tree();
on_each_cpu(ipi_flush_tlb_range, &fd, 1);
}
+static void ipi_flush_tlb_kernel_range(void *arg)
+{
+ struct flush_data *fd = arg;
+ local_flush_tlb_kernel_range(fd->addr1, fd->addr2);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ struct flush_data fd = {
+ .addr1 = start,
+ .addr2 = end,
+ };
+ on_each_cpu(ipi_flush_tlb_kernel_range, &fd, 1);
+}
+
/* Cache flush functions */
static void ipi_flush_cache_all(void *arg)
#include <linux/in6.h>
#include <asm/uaccess.h>
+#include <asm/cacheflush.h>
#include <asm/checksum.h>
#include <asm/dma.h>
#include <asm/io.h>
* Architecture-specific symbols
*/
EXPORT_SYMBOL(__xtensa_copy_user);
+EXPORT_SYMBOL(__invalidate_icache_range);
/*
* Kernel hacking ...
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(_mcount);
#endif
+
+EXPORT_SYMBOL(__invalidate_dcache_range);
+#if XCHAL_DCACHE_IS_WRITEBACK
+EXPORT_SYMBOL(__flush_dcache_range);
+#endif
obj-y := init.o cache.o misc.o
obj-$(CONFIG_MMU) += fault.o mmu.o tlb.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
*
*/
+#if (DCACHE_WAY_SIZE > PAGE_SIZE) && defined(CONFIG_HIGHMEM)
+#error "HIGHMEM is not supported on cores with aliasing cache."
+#endif
+
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
/*
#else
if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)
&& (vma->vm_flags & VM_EXEC) != 0) {
- unsigned long paddr = (unsigned long) page_address(page);
+ unsigned long paddr = (unsigned long)kmap_atomic(page);
__flush_dcache_page(paddr);
__invalidate_icache_page(paddr);
set_bit(PG_arch_1, &page->flags);
+ kunmap_atomic((void *)paddr);
}
#endif
}
--- /dev/null
+/*
+ * High memory support for Xtensa architecture
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2014 Cadence Design Systems Inc.
+ */
+
+#include <linux/export.h>
+#include <linux/highmem.h>
+#include <asm/tlbflush.h>
+
+static pte_t *kmap_pte;
+
+void *kmap_atomic(struct page *page)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+ int type;
+
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ type = kmap_atomic_idx_push();
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(kmap_pte - idx)));
+#endif
+ set_pte(kmap_pte - idx, mk_pte(page, PAGE_KERNEL_EXEC));
+
+ return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void __kunmap_atomic(void *kvaddr)
+{
+ int idx, type;
+
+ if (kvaddr >= (void *)FIXADDR_START &&
+ kvaddr < (void *)FIXADDR_TOP) {
+ type = kmap_atomic_idx();
+ idx = type + KM_TYPE_NR * smp_processor_id();
+
+ /*
+ * Force other mappings to Oops if they'll try to access this
+ * pte without first remap it. Keeping stale mappings around
+ * is a bad idea also, in case the page changes cacheability
+ * attributes or becomes a protected page in a hypervisor.
+ */
+ pte_clear(&init_mm, kvaddr, kmap_pte - idx);
+ local_flush_tlb_kernel_range((unsigned long)kvaddr,
+ (unsigned long)kvaddr + PAGE_SIZE);
+
+ kmap_atomic_idx_pop();
+ }
+
+ pagefault_enable();
+}
+EXPORT_SYMBOL(__kunmap_atomic);
+
+void __init kmap_init(void)
+{
+ unsigned long kmap_vstart;
+
+ /* cache the first kmap pte */
+ kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+ kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}
* for more details.
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2014 Cadence Design Systems Inc.
*
* Chris Zankel <chris@zankel.net>
* Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
#include <linux/errno.h>
#include <linux/bootmem.h>
#include <linux/gfp.h>
+#include <linux/highmem.h>
#include <linux/swap.h>
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <asm/bootparam.h>
#include <asm/page.h>
#include <asm/sections.h>
+#include <asm/sysmem.h>
+
+struct sysmem_info sysmem __initdata;
+
+static void __init sysmem_dump(void)
+{
+ unsigned i;
+
+ pr_debug("Sysmem:\n");
+ for (i = 0; i < sysmem.nr_banks; ++i)
+ pr_debug(" 0x%08lx - 0x%08lx (%ldK)\n",
+ sysmem.bank[i].start, sysmem.bank[i].end,
+ (sysmem.bank[i].end - sysmem.bank[i].start) >> 10);
+}
+
+/*
+ * Find bank with maximal .start such that bank.start <= start
+ */
+static inline struct meminfo * __init find_bank(unsigned long start)
+{
+ unsigned i;
+ struct meminfo *it = NULL;
+
+ for (i = 0; i < sysmem.nr_banks; ++i)
+ if (sysmem.bank[i].start <= start)
+ it = sysmem.bank + i;
+ else
+ break;
+ return it;
+}
+
+/*
+ * Move all memory banks starting at 'from' to a new place at 'to',
+ * adjust nr_banks accordingly.
+ * Both 'from' and 'to' must be inside the sysmem.bank.
+ *
+ * Returns: 0 (success), -ENOMEM (not enough space in the sysmem.bank).
+ */
+static int __init move_banks(struct meminfo *to, struct meminfo *from)
+{
+ unsigned n = sysmem.nr_banks - (from - sysmem.bank);
+
+ if (to > from && to - from + sysmem.nr_banks > SYSMEM_BANKS_MAX)
+ return -ENOMEM;
+ if (to != from)
+ memmove(to, from, n * sizeof(struct meminfo));
+ sysmem.nr_banks += to - from;
+ return 0;
+}
+
+/*
+ * Add new bank to sysmem. Resulting sysmem is the union of bytes of the
+ * original sysmem and the new bank.
+ *
+ * Returns: 0 (success), < 0 (error)
+ */
+int __init add_sysmem_bank(unsigned long start, unsigned long end)
+{
+ unsigned i;
+ struct meminfo *it = NULL;
+ unsigned long sz;
+ unsigned long bank_sz = 0;
+
+ if (start == end ||
+ (start < end) != (PAGE_ALIGN(start) < (end & PAGE_MASK))) {
+ pr_warn("Ignoring small memory bank 0x%08lx size: %ld bytes\n",
+ start, end - start);
+ return -EINVAL;
+ }
+
+ start = PAGE_ALIGN(start);
+ end &= PAGE_MASK;
+ sz = end - start;
+
+ it = find_bank(start);
+
+ if (it)
+ bank_sz = it->end - it->start;
+
+ if (it && bank_sz >= start - it->start) {
+ if (end - it->start > bank_sz)
+ it->end = end;
+ else
+ return 0;
+ } else {
+ if (!it)
+ it = sysmem.bank;
+ else
+ ++it;
+
+ if (it - sysmem.bank < sysmem.nr_banks &&
+ it->start - start <= sz) {
+ it->start = start;
+ if (it->end - it->start < sz)
+ it->end = end;
+ else
+ return 0;
+ } else {
+ if (move_banks(it + 1, it) < 0) {
+ pr_warn("Ignoring memory bank 0x%08lx size %ld bytes\n",
+ start, end - start);
+ return -EINVAL;
+ }
+ it->start = start;
+ it->end = end;
+ return 0;
+ }
+ }
+ sz = it->end - it->start;
+ for (i = it + 1 - sysmem.bank; i < sysmem.nr_banks; ++i)
+ if (sysmem.bank[i].start - it->start <= sz) {
+ if (sz < sysmem.bank[i].end - it->start)
+ it->end = sysmem.bank[i].end;
+ } else {
+ break;
+ }
+
+ move_banks(it + 1, sysmem.bank + i);
+ return 0;
+}
/*
* mem_reserve(start, end, must_exist)
*
* Reserve some memory from the memory pool.
+ * If must_exist is set and a part of the region being reserved does not exist
+ * memory map is not altered.
*
* Parameters:
* start Start of region,
* must_exist Must exist in memory pool.
*
* Returns:
- * 0 (memory area couldn't be mapped)
- * -1 (success)
+ * 0 (success)
+ * < 0 (error)
*/
int __init mem_reserve(unsigned long start, unsigned long end, int must_exist)
{
- int i;
-
- if (start == end)
- return 0;
+ struct meminfo *it;
+ struct meminfo *rm = NULL;
+ unsigned long sz;
+ unsigned long bank_sz = 0;
start = start & PAGE_MASK;
end = PAGE_ALIGN(end);
+ sz = end - start;
+ if (!sz)
+ return -EINVAL;
- for (i = 0; i < sysmem.nr_banks; i++)
- if (start < sysmem.bank[i].end
- && end >= sysmem.bank[i].start)
- break;
+ it = find_bank(start);
+
+ if (it)
+ bank_sz = it->end - it->start;
- if (i == sysmem.nr_banks) {
- if (must_exist)
- printk (KERN_WARNING "mem_reserve: [0x%0lx, 0x%0lx) "
- "not in any region!\n", start, end);
- return 0;
+ if ((!it || end - it->start > bank_sz) && must_exist) {
+ pr_warn("mem_reserve: [0x%0lx, 0x%0lx) not in any region!\n",
+ start, end);
+ return -EINVAL;
}
- if (start > sysmem.bank[i].start) {
- if (end < sysmem.bank[i].end) {
- /* split entry */
- if (sysmem.nr_banks >= SYSMEM_BANKS_MAX)
- panic("meminfo overflow\n");
- sysmem.bank[sysmem.nr_banks].start = end;
- sysmem.bank[sysmem.nr_banks].end = sysmem.bank[i].end;
- sysmem.nr_banks++;
+ if (it && start - it->start < bank_sz) {
+ if (start == it->start) {
+ if (end - it->start < bank_sz) {
+ it->start = end;
+ return 0;
+ } else {
+ rm = it;
+ }
+ } else {
+ it->end = start;
+ if (end - it->start < bank_sz)
+ return add_sysmem_bank(end,
+ it->start + bank_sz);
+ ++it;
}
- sysmem.bank[i].end = start;
+ }
- } else if (end < sysmem.bank[i].end) {
- sysmem.bank[i].start = end;
+ if (!it)
+ it = sysmem.bank;
- } else {
- /* remove entry */
- sysmem.nr_banks--;
- sysmem.bank[i].start = sysmem.bank[sysmem.nr_banks].start;
- sysmem.bank[i].end = sysmem.bank[sysmem.nr_banks].end;
+ for (; it < sysmem.bank + sysmem.nr_banks; ++it) {
+ if (it->end - start <= sz) {
+ if (!rm)
+ rm = it;
+ } else {
+ if (it->start - start < sz)
+ it->start = end;
+ break;
+ }
}
- return -1;
+
+ if (rm)
+ move_banks(rm, it);
+
+ return 0;
}
unsigned long bootmap_start, bootmap_size;
int i;
+ sysmem_dump();
max_low_pfn = max_pfn = 0;
min_low_pfn = ~0;
void __init zones_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES];
- int i;
-
/* All pages are DMA-able, so we put them all in the DMA zone. */
-
- zones_size[ZONE_DMA] = max_low_pfn - ARCH_PFN_OFFSET;
- for (i = 1; i < MAX_NR_ZONES; i++)
- zones_size[i] = 0;
-
+ unsigned long zones_size[MAX_NR_ZONES] = {
+ [ZONE_DMA] = max_low_pfn - ARCH_PFN_OFFSET,
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
+ [ZONE_HIGHMEM] = max_pfn - max_low_pfn,
#endif
-
+ };
free_area_init_node(0, zones_size, ARCH_PFN_OFFSET, NULL);
}
void __init mem_init(void)
{
- max_mapnr = max_low_pfn - ARCH_PFN_OFFSET;
- high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
#ifdef CONFIG_HIGHMEM
-#error HIGHGMEM not implemented in init.c
+ unsigned long tmp;
+
+ reset_all_zones_managed_pages();
+ for (tmp = max_low_pfn; tmp < max_pfn; tmp++)
+ free_highmem_page(pfn_to_page(tmp));
#endif
+ max_mapnr = max_pfn - ARCH_PFN_OFFSET;
+ high_memory = (void *)__va(max_low_pfn << PAGE_SHIFT);
+
free_all_bootmem();
mem_init_print_info(NULL);
+ pr_info("virtual kernel memory layout:\n"
+#ifdef CONFIG_HIGHMEM
+ " pkmap : 0x%08lx - 0x%08lx (%5lu kB)\n"
+ " fixmap : 0x%08lx - 0x%08lx (%5lu kB)\n"
+#endif
+ " vmalloc : 0x%08x - 0x%08x (%5u MB)\n"
+ " lowmem : 0x%08x - 0x%08lx (%5lu MB)\n",
+#ifdef CONFIG_HIGHMEM
+ PKMAP_BASE, PKMAP_BASE + LAST_PKMAP * PAGE_SIZE,
+ (LAST_PKMAP*PAGE_SIZE) >> 10,
+ FIXADDR_START, FIXADDR_TOP,
+ (FIXADDR_TOP - FIXADDR_START) >> 10,
+#endif
+ VMALLOC_START, VMALLOC_END,
+ (VMALLOC_END - VMALLOC_START) >> 20,
+ PAGE_OFFSET, PAGE_OFFSET +
+ (max_low_pfn - min_low_pfn) * PAGE_SIZE,
+ ((max_low_pfn - min_low_pfn) * PAGE_SIZE) >> 20);
}
#ifdef CONFIG_BLK_DEV_INITRD
{
free_initmem_default(-1);
}
+
+static void __init parse_memmap_one(char *p)
+{
+ char *oldp;
+ unsigned long start_at, mem_size;
+
+ if (!p)
+ return;
+
+ oldp = p;
+ mem_size = memparse(p, &p);
+ if (p == oldp)
+ return;
+
+ switch (*p) {
+ case '@':
+ start_at = memparse(p + 1, &p);
+ add_sysmem_bank(start_at, start_at + mem_size);
+ break;
+
+ case '$':
+ start_at = memparse(p + 1, &p);
+ mem_reserve(start_at, start_at + mem_size, 0);
+ break;
+
+ case 0:
+ mem_reserve(mem_size, 0, 0);
+ break;
+
+ default:
+ pr_warn("Unrecognized memmap syntax: %s\n", p);
+ break;
+ }
+}
+
+static int __init parse_memmap_opt(char *str)
+{
+ while (str) {
+ char *k = strchr(str, ',');
+
+ if (k)
+ *k++ = 0;
+
+ parse_memmap_one(str);
+ str = k;
+ }
+
+ return 0;
+}
+early_param("memmap", parse_memmap_opt);
*
* Extracted from init.c
*/
+#include <linux/bootmem.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/string.h>
#include <asm/initialize_mmu.h>
#include <asm/io.h>
+#if defined(CONFIG_HIGHMEM)
+static void * __init init_pmd(unsigned long vaddr)
+{
+ pgd_t *pgd = pgd_offset_k(vaddr);
+ pmd_t *pmd = pmd_offset(pgd, vaddr);
+
+ if (pmd_none(*pmd)) {
+ unsigned i;
+ pte_t *pte = alloc_bootmem_low_pages(PAGE_SIZE);
+
+ for (i = 0; i < 1024; i++)
+ pte_clear(NULL, 0, pte + i);
+
+ set_pmd(pmd, __pmd(((unsigned long)pte) & PAGE_MASK));
+ BUG_ON(pte != pte_offset_kernel(pmd, 0));
+ pr_debug("%s: vaddr: 0x%08lx, pmd: 0x%p, pte: 0x%p\n",
+ __func__, vaddr, pmd, pte);
+ return pte;
+ } else {
+ return pte_offset_kernel(pmd, 0);
+ }
+}
+
+static void __init fixedrange_init(void)
+{
+ BUILD_BUG_ON(FIXADDR_SIZE > PMD_SIZE);
+ init_pmd(__fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK);
+}
+#endif
+
void __init paging_init(void)
{
memset(swapper_pg_dir, 0, PAGE_SIZE);
+#ifdef CONFIG_HIGHMEM
+ fixedrange_init();
+ pkmap_page_table = init_pmd(PKMAP_BASE);
+ kmap_init();
+#endif
}
/*
local_irq_restore(flags);
}
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ if (end > start && start >= TASK_SIZE && end <= PAGE_OFFSET &&
+ end - start < _TLB_ENTRIES << PAGE_SHIFT) {
+ start &= PAGE_MASK;
+ while (start < end) {
+ invalidate_itlb_mapping(start);
+ invalidate_dtlb_mapping(start);
+ start += PAGE_SIZE;
+ }
+ } else {
+ local_flush_tlb_all();
+ }
+}
+
#ifdef CONFIG_DEBUG_TLB_SANITY
static unsigned get_pte_for_vaddr(unsigned vaddr)
# "prom monitor" library routines under Linux.
#
-obj-y = console.o setup.o
+obj-y = setup.o
+obj-$(CONFIG_TTY) += console.o
obj-$(CONFIG_NET) += network.o
obj-$(CONFIG_BLK_DEV_SIMDISK) += simdisk.o
/* early initialization */
-extern sysmem_info_t __initdata sysmem;
-
-void platform_init(bp_tag_t* first)
+void __init platform_init(bp_tag_t *first)
{
- /* Set default memory block if not provided by the bootloader. */
-
- if (sysmem.nr_banks == 0) {
- sysmem.nr_banks = 1;
- sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START;
- sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START
- + PLATFORM_DEFAULT_MEM_SIZE;
- }
}
/* Heartbeat. Let the LED blink. */
#define EM_ARCOMPACT 93
#endif
+#ifndef EM_XTENSA
+#define EM_XTENSA 94
+#endif
+
#ifndef EM_AARCH64
#define EM_AARCH64 183
#endif
case EM_AARCH64:
case EM_MICROBLAZE:
case EM_MIPS:
+ case EM_XTENSA:
break;
} /* end switch */
projects / cascardo / linux.git / commitdiff