bnx2x: Remove fiber remote fault detection

Remove remote fault detection as a tactic retreat due to link issues involved with it.
Once issue is resolved, this feature will be restored again.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index f7a7ac3..db5913d 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -10638,8 +10638,7 @@ static struct bnx2x_phy phy_warpcore = {
        .type           = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
        .addr           = 0xff,
        .def_md_devad   = 0,
-       .flags          = (FLAGS_HW_LOCK_REQUIRED |
-                          FLAGS_TX_ERROR_CHECK),
+       .flags          = FLAGS_HW_LOCK_REQUIRED,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,
@@ -10765,8 +10764,7 @@ static struct bnx2x_phy phy_8706 = {
        .type           = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
        .addr           = 0xff,
        .def_md_devad   = 0,
-       .flags          = (FLAGS_INIT_XGXS_FIRST |
-                          FLAGS_TX_ERROR_CHECK),
+       .flags          = FLAGS_INIT_XGXS_FIRST,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,
@@ -10797,8 +10795,7 @@ static struct bnx2x_phy phy_8726 = {
        .addr           = 0xff,
        .def_md_devad   = 0,
        .flags          = (FLAGS_HW_LOCK_REQUIRED |
-                          FLAGS_INIT_XGXS_FIRST |
-                          FLAGS_TX_ERROR_CHECK),
+                          FLAGS_INIT_XGXS_FIRST),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,
@@ -10829,8 +10826,7 @@ static struct bnx2x_phy phy_8727 = {
        .type           = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
        .addr           = 0xff,
        .def_md_devad   = 0,
-       .flags          = (FLAGS_FAN_FAILURE_DET_REQ |
-                          FLAGS_TX_ERROR_CHECK),
+       .flags          = FLAGS_FAN_FAILURE_DET_REQ,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,