#ifndef _X86_SPINLOCK_H_
#define _X86_SPINLOCK_H_
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ *
+ * Simple spin lock operations. There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#endif /* CONFIG_PARAVIRT */
#ifdef CONFIG_X86_32
-# include "spinlock_32.h"
+typedef char _slock_t;
+# define LOCK_INS_DEC "decb"
+# define LOCK_INS_XCH "xchgb"
+# define LOCK_INS_MOV "movb"
+# define LOCK_INS_CMP "cmpb"
+# define LOCK_PTR_REG "a"
#else
-# include "spinlock_64.h"
+typedef int _slock_t;
+# define LOCK_INS_DEC "decl"
+# define LOCK_INS_XCH "xchgl"
+# define LOCK_INS_MOV "movl"
+# define LOCK_INS_CMP "cmpl"
+# define LOCK_PTR_REG "D"
+#endif
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+ return *(volatile _slock_t *)(&(lock)->slock) <= 0;
+}
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+ asm volatile(
+ "\n1:\t"
+ LOCK_PREFIX " ; " LOCK_INS_DEC " %0\n\t"
+ "jns 3f\n"
+ "2:\t"
+ "rep;nop\n\t"
+ LOCK_INS_CMP " $0,%0\n\t"
+ "jle 2b\n\t"
+ "jmp 1b\n"
+ "3:\n\t"
+ : "+m" (lock->slock) : : "memory");
+}
+
+/*
+ * It is easier for the lock validator if interrupts are not re-enabled
+ * in the middle of a lock-acquire. This is a performance feature anyway
+ * so we turn it off:
+ *
+ * NOTE: there's an irqs-on section here, which normally would have to be
+ * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use this variant.
+ */
+#ifndef CONFIG_PROVE_LOCKING
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+ unsigned long flags)
+{
+ asm volatile(
+ "\n1:\t"
+ LOCK_PREFIX " ; " LOCK_INS_DEC " %[slock]\n\t"
+ "jns 5f\n"
+ "testl $0x200, %[flags]\n\t"
+ "jz 4f\n\t"
+ STI_STRING "\n"
+ "3:\t"
+ "rep;nop\n\t"
+ LOCK_INS_CMP " $0, %[slock]\n\t"
+ "jle 3b\n\t"
+ CLI_STRING "\n\t"
+ "jmp 1b\n"
+ "4:\t"
+ "rep;nop\n\t"
+ LOCK_INS_CMP " $0, %[slock]\n\t"
+ "jg 1b\n\t"
+ "jmp 4b\n"
+ "5:\n\t"
+ : [slock] "+m" (lock->slock)
+ : [flags] "r" ((u32)flags)
+ CLI_STI_INPUT_ARGS
+ : "memory" CLI_STI_CLOBBERS);
+}
+#endif
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+ _slock_t oldval;
+
+ asm volatile(
+ LOCK_INS_XCH " %0,%1"
+ :"=q" (oldval), "+m" (lock->slock)
+ :"0" (0) : "memory");
+
+ return oldval > 0;
+}
+
+/*
+ * __raw_spin_unlock based on writing $1 to the low byte.
+ * This method works. Despite all the confusion.
+ * (except on PPro SMP or if we are using OOSTORE, so we use xchgb there)
+ * (PPro errata 66, 92)
+ */
+#if defined(X86_64) || \
+ (!defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE))
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ asm volatile(LOCK_INS_MOV " $1,%0" : "=m" (lock->slock) :: "memory");
+}
+
+#else
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ unsigned char oldval = 1;
+
+ asm volatile("xchgb %b0, %1"
+ : "=q" (oldval), "+m" (lock->slock)
+ : "0" (oldval) : "memory");
+}
+
#endif
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+ while (__raw_spin_is_locked(lock))
+ cpu_relax();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ */
+
+static inline int __raw_read_can_lock(raw_rwlock_t *lock)
+{
+ return (int)(lock)->lock > 0;
+}
+
+static inline int __raw_write_can_lock(raw_rwlock_t *lock)
+{
+ return (lock)->lock == RW_LOCK_BIAS;
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
+ "jns 1f\n"
+ "call __read_lock_failed\n\t"
+ "1:\n"
+ ::LOCK_PTR_REG (rw) : "memory");
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK_PREFIX " subl %1,(%0)\n\t"
+ "jz 1f\n"
+ "call __write_lock_failed\n\t"
+ "1:\n"
+ ::LOCK_PTR_REG (rw), "i" (RW_LOCK_BIAS) : "memory");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *lock)
+{
+ atomic_t *count = (atomic_t *)lock;
+
+ atomic_dec(count);
+ if (atomic_read(count) >= 0)
+ return 1;
+ atomic_inc(count);
+ return 0;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *lock)
+{
+ atomic_t *count = (atomic_t *)lock;
+
+ if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+ return 1;
+ atomic_add(RW_LOCK_BIAS, count);
+ return 0;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK_PREFIX "addl %1, %0"
+ : "+m" (rw->lock) : "i" (RW_LOCK_BIAS) : "memory");
+}
+
+#define _raw_spin_relax(lock) cpu_relax()
+#define _raw_read_relax(lock) cpu_relax()
+#define _raw_write_relax(lock) cpu_relax()
+
#endif
+++ /dev/null
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#include <asm/atomic.h>
-#include <asm/rwlock.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- *
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- *
- * (the type definitions are in asm/spinlock_types.h)
- */
-
-typedef char _slock_t;
-#define LOCK_INS_DEC "decb"
-#define LOCK_INS_XCH "xchgb"
-#define LOCK_INS_MOV "movb"
-#define LOCK_INS_CMP "cmpb"
-#define LOCK_PTR_REG "a"
-
-static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
-{
- return *(volatile _slock_t *)(&(lock)->slock) <= 0;
-}
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
- asm volatile(
- "\n1:\t"
- LOCK_PREFIX " ; " LOCK_INS_DEC " %0\n\t"
- "jns 3f\n"
- "2:\t"
- "rep;nop\n\t"
- LOCK_INS_CMP " $0,%0\n\t"
- "jle 2b\n\t"
- "jmp 1b\n"
- "3:\n\t"
- : "+m" (lock->slock) : : "memory");
-}
-
-/*
- * It is easier for the lock validator if interrupts are not re-enabled
- * in the middle of a lock-acquire. This is a performance feature anyway
- * so we turn it off:
- *
- * NOTE: there's an irqs-on section here, which normally would have to be
- * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use this variant.
- */
-#ifndef CONFIG_PROVE_LOCKING
-static inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
- unsigned long flags)
-{
- asm volatile(
- "\n1:\t"
- LOCK_PREFIX " ; " LOCK_INS_DEC " %[slock]\n\t"
- "jns 5f\n"
- "testl $0x200, %[flags]\n\t"
- "jz 4f\n\t"
- STI_STRING "\n"
- "3:\t"
- "rep;nop\n\t"
- LOCK_INS_CMP " $0, %[slock]\n\t"
- "jle 3b\n\t"
- CLI_STRING "\n\t"
- "jmp 1b\n"
- "4:\t"
- "rep;nop\n\t"
- LOCK_INS_CMP " $0, %[slock]\n\t"
- "jg 1b\n\t"
- "jmp 4b\n"
- "5:\n\t"
- : [slock] "+m" (lock->slock)
- : [flags] "r" ((u32)flags)
- CLI_STI_INPUT_ARGS
- : "memory" CLI_STI_CLOBBERS);
-}
-#endif
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
- _slock_t oldval;
-
- asm volatile(
- LOCK_INS_XCH " %0,%1"
- :"=q" (oldval), "+m" (lock->slock)
- :"0" (0) : "memory");
-
- return oldval > 0;
-}
-
-/*
- * __raw_spin_unlock based on writing $1 to the low byte.
- * This method works. Despite all the confusion.
- * (except on PPro SMP or if we are using OOSTORE, so we use xchgb there)
- * (PPro errata 66, 92)
- */
-
-#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
- asm volatile(LOCK_INS_MOV " $1,%0" : "=m" (lock->slock) :: "memory");
-}
-
-#else
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
- unsigned char oldval = 1;
-
- asm volatile("xchgb %b0, %1"
- : "=q" (oldval), "+m" (lock->slock)
- : "0" (oldval) : "memory");
-}
-
-#endif
-
-static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
-{
- while (__raw_spin_is_locked(lock))
- cpu_relax();
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- *
- * On x86, we implement read-write locks as a 32-bit counter
- * with the high bit (sign) being the "contended" bit.
- */
-
-static inline int __raw_read_can_lock(raw_rwlock_t *lock)
-{
- return (int)(lock)->lock > 0;
-}
-
-static inline int __raw_write_can_lock(raw_rwlock_t *lock)
-{
- return (lock)->lock == RW_LOCK_BIAS;
-}
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
- "jns 1f\n"
- "call __read_lock_failed\n\t"
- "1:\n"
- ::LOCK_PTR_REG (rw) : "memory");
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX " subl %1,(%0)\n\t"
- "jz 1f\n"
- "call __write_lock_failed\n\t"
- "1:\n"
- ::LOCK_PTR_REG (rw), "i" (RW_LOCK_BIAS) : "memory");
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *lock)
-{
- atomic_t *count = (atomic_t *)lock;
-
- atomic_dec(count);
- if (atomic_read(count) >= 0)
- return 1;
- atomic_inc(count);
- return 0;
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *lock)
-{
- atomic_t *count = (atomic_t *)lock;
-
- if (atomic_sub_and_test(RW_LOCK_BIAS, count))
- return 1;
- atomic_add(RW_LOCK_BIAS, count);
- return 0;
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX "addl %1, %0"
- : "+m" (rw->lock) : "i" (RW_LOCK_BIAS) : "memory");
-}
-
-#define _raw_spin_relax(lock) cpu_relax()
-#define _raw_read_relax(lock) cpu_relax()
-#define _raw_write_relax(lock) cpu_relax()
-
-#endif /* __ASM_SPINLOCK_H */
+++ /dev/null
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#include <asm/atomic.h>
-#include <asm/rwlock.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- *
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- *
- * (the type definitions are in asm/spinlock_types.h)
- */
-
-typedef int _slock_t;
-#define LOCK_INS_DEC "decl"
-#define LOCK_INS_XCH "xchgl"
-#define LOCK_INS_MOV "movl"
-#define LOCK_INS_CMP "cmpl"
-#define LOCK_PTR_REG "D"
-
-static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
-{
- return *(volatile _slock_t *)(&(lock)->slock) <= 0;
-}
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
- asm volatile(
- "\n1:\t"
- LOCK_PREFIX " ; " LOCK_INS_DEC " %0\n\t"
- "jns 3f\n"
- "2:\t"
- "rep;nop\n\t"
- LOCK_INS_CMP " $0,%0\n\t"
- "jle 2b\n\t"
- "jmp 1b\n"
- "3:\n\t"
- : "+m" (lock->slock) : : "memory");
-}
-
-/*
- * It is easier for the lock validator if interrupts are not re-enabled
- * in the middle of a lock-acquire. This is a performance feature anyway
- * so we turn it off:
- *
- * NOTE: there's an irqs-on section here, which normally would have to be
- * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use this variant.
- */
-#ifndef CONFIG_PROVE_LOCKING
-static inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
- unsigned long flags)
-{
- asm volatile(
- "\n1:\t"
- LOCK_PREFIX " ; " LOCK_INS_DEC " %[slock]\n\t"
- "jns 5f\n"
- "testl $0x200, %[flags]\n\t"
- "jz 4f\n\t"
- STI_STRING "\n"
- "3:\t"
- "rep;nop\n\t"
- LOCK_INS_CMP " $0, %[slock]\n\t"
- "jle 3b\n\t"
- CLI_STRING "\n\t"
- "jmp 1b\n"
- "4:\t"
- "rep;nop\n\t"
- LOCK_INS_CMP " $0, %[slock]\n\t"
- "jg 1b\n\t"
- "jmp 4b\n"
- "5:\n\t"
- : [slock] "+m" (lock->slock)
- : [flags] "r" ((u32)flags)
- CLI_STI_INPUT_ARGS
- : "memory" CLI_STI_CLOBBERS);
-}
-#endif
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
- _slock_t oldval;
-
- asm volatile(
- LOCK_INS_XCH " %0,%1"
- :"=q" (oldval), "+m" (lock->slock)
- :"0" (0) : "memory");
-
- return oldval > 0;
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
- asm volatile(LOCK_INS_MOV " $1,%0" : "=m" (lock->slock) :: "memory");
-}
-
-static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
-{
- while (__raw_spin_is_locked(lock))
- cpu_relax();
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- *
- * On x86, we implement read-write locks as a 32-bit counter
- * with the high bit (sign) being the "contended" bit.
- */
-
-static inline int __raw_read_can_lock(raw_rwlock_t *lock)
-{
- return (int)(lock)->lock > 0;
-}
-
-static inline int __raw_write_can_lock(raw_rwlock_t *lock)
-{
- return (lock)->lock == RW_LOCK_BIAS;
-}
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
- "jns 1f\n"
- "call __read_lock_failed\n\t"
- "1:\n"
- ::LOCK_PTR_REG (rw) : "memory");
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX " subl %1,(%0)\n\t"
- "jz 1f\n"
- "call __write_lock_failed\n\t"
- "1:\n"
- ::LOCK_PTR_REG (rw), "i" (RW_LOCK_BIAS) : "memory");
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *lock)
-{
- atomic_t *count = (atomic_t *)lock;
-
- atomic_dec(count);
- if (atomic_read(count) >= 0)
- return 1;
- atomic_inc(count);
- return 0;
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *lock)
-{
- atomic_t *count = (atomic_t *)lock;
-
- if (atomic_sub_and_test(RW_LOCK_BIAS, count))
- return 1;
- atomic_add(RW_LOCK_BIAS, count);
- return 0;
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
- asm volatile(LOCK_PREFIX "addl %1, %0"
- : "+m" (rw->lock) : "i" (RW_LOCK_BIAS) : "memory");
-}
-
-#define _raw_spin_relax(lock) cpu_relax()
-#define _raw_read_relax(lock) cpu_relax()
-#define _raw_write_relax(lock) cpu_relax()
-
-#endif /* __ASM_SPINLOCK_H */
projects / cascardo / linux.git / commitdiff