static int
csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers)
{
- return csio_hw_read_flash(hw, FW_IMG_START +
+ return csio_hw_read_flash(hw, FLASH_FW_START +
offsetof(struct fw_hdr, fw_ver), 1,
vers, 0);
}
return -EINVAL;
}
- if (size > FW_MAX_SIZE) {
+ if (size > FLASH_FW_MAX_SIZE) {
csio_err(hw, "FW image too large, max is %u bytes\n",
- FW_MAX_SIZE);
+ FLASH_FW_MAX_SIZE);
return -EINVAL;
}
i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */
csio_dbg(hw, "Erasing sectors... start:%d end:%d\n",
- FW_START_SEC, FW_START_SEC + i - 1);
+ FLASH_FW_START_SEC, FLASH_FW_START_SEC + i - 1);
- ret = csio_hw_flash_erase_sectors(hw, FW_START_SEC,
- FW_START_SEC + i - 1);
+ ret = csio_hw_flash_erase_sectors(hw, FLASH_FW_START_SEC,
+ FLASH_FW_START_SEC + i - 1);
if (ret) {
csio_err(hw, "Flash Erase failed\n");
goto out;
*/
memcpy(first_page, fw_data, SF_PAGE_SIZE);
((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff);
- ret = csio_hw_write_flash(hw, FW_IMG_START, SF_PAGE_SIZE, first_page);
+ ret = csio_hw_write_flash(hw, FLASH_FW_START, SF_PAGE_SIZE, first_page);
if (ret)
goto out;
csio_dbg(hw, "Writing Flash .. start:%d end:%d\n",
FW_IMG_START, FW_IMG_START + size);
- addr = FW_IMG_START;
+ addr = FLASH_FW_START;
for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
addr += SF_PAGE_SIZE;
fw_data += SF_PAGE_SIZE;
}
ret = csio_hw_write_flash(hw,
- FW_IMG_START +
+ FLASH_FW_START +
offsetof(struct fw_hdr, fw_ver),
sizeof(hdr->fw_ver),
(const uint8_t *)&hdr->fw_ver);
return csio_hw_fw_restart(hw, mbox, reset);
}
-
-/*
- * csio_hw_fw_config_file - setup an adapter via a Configuration File
- * @hw: the HW module
- * @mbox: mailbox to use for the FW command
- * @mtype: the memory type where the Configuration File is located
- * @maddr: the memory address where the Configuration File is located
- * @finiver: return value for CF [fini] version
- * @finicsum: return value for CF [fini] checksum
- * @cfcsum: return value for CF computed checksum
- *
- * Issue a command to get the firmware to process the Configuration
- * File located at the specified mtype/maddress. If the Configuration
- * File is processed successfully and return value pointers are
- * provided, the Configuration File "[fini] section version and
- * checksum values will be returned along with the computed checksum.
- * It's up to the caller to decide how it wants to respond to the
- * checksums not matching but it recommended that a prominant warning
- * be emitted in order to help people rapidly identify changed or
- * corrupted Configuration Files.
- *
- * Also note that it's possible to modify things like "niccaps",
- * "toecaps",etc. between processing the Configuration File and telling
- * the firmware to use the new configuration. Callers which want to
- * do this will need to "hand-roll" their own CAPS_CONFIGS commands for
- * Configuration Files if they want to do this.
- */
-static int
-csio_hw_fw_config_file(struct csio_hw *hw,
- unsigned int mtype, unsigned int maddr,
- uint32_t *finiver, uint32_t *finicsum, uint32_t *cfcsum)
-{
- struct csio_mb *mbp;
- struct fw_caps_config_cmd *caps_cmd;
- int rv = -EINVAL;
- enum fw_retval ret;
-
- mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
- if (!mbp) {
- CSIO_INC_STATS(hw, n_err_nomem);
- return -ENOMEM;
- }
- /*
- * Tell the firmware to process the indicated Configuration File.
- * If there are no errors and the caller has provided return value
- * pointers for the [fini] section version, checksum and computed
- * checksum, pass those back to the caller.
- */
- caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb);
- CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
- caps_cmd->op_to_write =
- htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
- FW_CMD_REQUEST_F |
- FW_CMD_READ_F);
- caps_cmd->cfvalid_to_len16 =
- htonl(FW_CAPS_CONFIG_CMD_CFVALID_F |
- FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) |
- FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) |
- FW_LEN16(*caps_cmd));
-
- if (csio_mb_issue(hw, mbp)) {
- csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n");
- goto out;
- }
-
- ret = csio_mb_fw_retval(mbp);
- if (ret != FW_SUCCESS) {
- csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
- goto out;
- }
-
- if (finiver)
- *finiver = ntohl(caps_cmd->finiver);
- if (finicsum)
- *finicsum = ntohl(caps_cmd->finicsum);
- if (cfcsum)
- *cfcsum = ntohl(caps_cmd->cfcsum);
-
- /* Validate device capabilities */
- if (csio_hw_validate_caps(hw, mbp)) {
- rv = -ENOENT;
- goto out;
- }
-
- /*
- * And now tell the firmware to use the configuration we just loaded.
- */
- caps_cmd->op_to_write =
- htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
- FW_CMD_REQUEST_F |
- FW_CMD_WRITE_F);
- caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
-
- if (csio_mb_issue(hw, mbp)) {
- csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n");
- goto out;
- }
-
- ret = csio_mb_fw_retval(mbp);
- if (ret != FW_SUCCESS) {
- csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
- goto out;
- }
-
- rv = 0;
-out:
- mempool_free(mbp, hw->mb_mempool);
- return rv;
-}
-
/*
* csio_get_device_params - Get device parameters.
* @hw: HW module
static int
csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
{
+ struct csio_mb *mbp = NULL;
+ struct fw_caps_config_cmd *caps_cmd;
unsigned int mtype, maddr;
- int rv;
+ int rv = -EINVAL;
uint32_t finiver = 0, finicsum = 0, cfcsum = 0;
- int using_flash;
char path[64];
+ char *config_name = NULL;
/*
* Reset device if necessary
rv = csio_hw_flash_config(hw, fw_cfg_param, path);
spin_lock_irq(&hw->lock);
if (rv != 0) {
- if (rv == -ENOENT) {
- /*
- * config file was not found. Use default
- * config file from flash.
- */
- mtype = FW_MEMTYPE_CF_FLASH;
- maddr = hw->chip_ops->chip_flash_cfg_addr(hw);
- using_flash = 1;
- } else {
- /*
- * we revert back to the hardwired config if
- * flashing failed.
- */
- goto bye;
- }
+ /*
+ * config file was not found. Use default
+ * config file from flash.
+ */
+ config_name = "On FLASH";
+ mtype = FW_MEMTYPE_CF_FLASH;
+ maddr = hw->chip_ops->chip_flash_cfg_addr(hw);
} else {
+ config_name = path;
mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param);
maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16;
- using_flash = 0;
}
- hw->cfg_store = (uint8_t)mtype;
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+ /*
+ * Tell the firmware to process the indicated Configuration File.
+ * If there are no errors and the caller has provided return value
+ * pointers for the [fini] section version, checksum and computed
+ * checksum, pass those back to the caller.
+ */
+ caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb);
+ CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
+ caps_cmd->op_to_write =
+ htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F);
+ caps_cmd->cfvalid_to_len16 =
+ htonl(FW_CAPS_CONFIG_CMD_CFVALID_F |
+ FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) |
+ FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) |
+ FW_LEN16(*caps_cmd));
+
+ if (csio_mb_issue(hw, mbp)) {
+ rv = -EINVAL;
+ goto bye;
+ }
+
+ rv = csio_mb_fw_retval(mbp);
+ /* If the CAPS_CONFIG failed with an ENOENT (for a Firmware
+ * Configuration File in FLASH), our last gasp effort is to use the
+ * Firmware Configuration File which is embedded in the
+ * firmware. A very few early versions of the firmware didn't
+ * have one embedded but we can ignore those.
+ */
+ if (rv == ENOENT) {
+ CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
+ caps_cmd->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F);
+ caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
+
+ if (csio_mb_issue(hw, mbp)) {
+ rv = -EINVAL;
+ goto bye;
+ }
+
+ rv = csio_mb_fw_retval(mbp);
+ config_name = "Firmware Default";
+ }
+ if (rv != FW_SUCCESS)
+ goto bye;
+
+ finiver = ntohl(caps_cmd->finiver);
+ finicsum = ntohl(caps_cmd->finicsum);
+ cfcsum = ntohl(caps_cmd->cfcsum);
/*
- * Issue a Capability Configuration command to the firmware to get it
- * to parse the Configuration File.
+ * And now tell the firmware to use the configuration we just loaded.
*/
- rv = csio_hw_fw_config_file(hw, mtype, maddr, &finiver,
- &finicsum, &cfcsum);
- if (rv != 0)
+ caps_cmd->op_to_write =
+ htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_WRITE_F);
+ caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
+
+ if (csio_mb_issue(hw, mbp)) {
+ rv = -EINVAL;
goto bye;
+ }
- hw->cfg_finiver = finiver;
- hw->cfg_finicsum = finicsum;
- hw->cfg_cfcsum = cfcsum;
- hw->cfg_csum_status = true;
+ rv = csio_mb_fw_retval(mbp);
+ if (rv != FW_SUCCESS) {
+ csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
+ goto bye;
+ }
+ mempool_free(mbp, hw->mb_mempool);
if (finicsum != cfcsum) {
csio_warn(hw,
"Config File checksum mismatch: csum=%#x, computed=%#x\n",
finicsum, cfcsum);
-
- hw->cfg_csum_status = false;
}
+ /* Validate device capabilities */
+ if (csio_hw_validate_caps(hw, mbp))
+ goto bye;
/*
* Note that we're operating with parameters
* not supplied by the driver, rather than from hard-wired
/* Post event to notify completion of configuration */
csio_post_event(&hw->sm, CSIO_HWE_INIT);
- csio_info(hw,
- "Firmware Configuration File %s, version %#x, computed checksum %#x\n",
- (using_flash ? "in device FLASH" : path), finiver, cfcsum);
-
+ csio_info(hw, "Successfully configure using Firmware "
+ "Configuration File %s, version %#x, computed checksum %#x\n",
+ config_name, finiver, cfcsum);
return 0;
/*
* Something bad happened. Return the error ...
*/
bye:
+ if (mbp)
+ mempool_free(mbp, hw->mb_mempool);
hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS;
- csio_dbg(hw, "Configuration file error %d\n", rv);
- return rv;
-}
-
-/*
- * Attempt to initialize the adapter via hard-coded, driver supplied
- * parameters ...
- */
-static int
-csio_hw_no_fwconfig(struct csio_hw *hw, int reset)
-{
- int rv;
- /*
- * Reset device if necessary
- */
- if (reset) {
- rv = csio_do_reset(hw, true);
- if (rv != 0)
- goto out;
- }
-
- /* Get and set device capabilities */
- rv = csio_config_device_caps(hw);
- if (rv != 0)
- goto out;
-
- /* device parameters */
- rv = csio_get_device_params(hw);
- if (rv != 0)
- goto out;
-
- /* Configure SGE */
- csio_wr_sge_init(hw);
-
- /* Post event to notify completion of configuration */
- csio_post_event(&hw->sm, CSIO_HWE_INIT);
-
-out:
+ csio_warn(hw, "Configuration file error %d\n", rv);
return rv;
}
if (request_firmware(&fw, FW_FNAME_T5, dev) < 0) {
csio_err(hw, "could not find firmware image %s, err: %d\n",
FW_FNAME_T5, ret);
- return -EINVAL;
+ } else {
+ fw_data = fw->data;
+ fw_size = fw->size;
}
/* allocate memory to read the header of the firmware on the
*/
card_fw = kmalloc(sizeof(*card_fw), GFP_KERNEL);
- fw_data = fw->data;
- fw_size = fw->size;
-
/* upgrade FW logic */
ret = csio_hw_prep_fw(hw, fw_info, fw_data, fw_size, card_fw,
hw->fw_state, reset);
if (rv != 0)
goto out;
- /*
- * If the firmware doesn't support Configuration
- * Files, use the old Driver-based, hard-wired
- * initialization. Otherwise, try using the
- * Configuration File support and fall back to the
- * Driver-based initialization if there's no
- * Configuration File found.
+ /* If the firmware doesn't support Configuration Files,
+ * return an error.
*/
- if (csio_hw_check_fwconfig(hw, param) == 0) {
- rv = csio_hw_use_fwconfig(hw, reset, param);
- if (rv == -ENOENT)
- goto out;
- if (rv != 0) {
- csio_info(hw,
- "No Configuration File present "
- "on adapter. Using hard-wired "
- "configuration parameters.\n");
- rv = csio_hw_no_fwconfig(hw, reset);
- }
- } else {
- rv = csio_hw_no_fwconfig(hw, reset);
+ rv = csio_hw_check_fwconfig(hw, param);
+ if (rv != 0) {
+ csio_info(hw, "Firmware doesn't support "
+ "Firmware Configuration files\n");
+ goto out;
}
- if (rv != 0)
+ /* The firmware provides us with a memory buffer where we can
+ * load a Configuration File from the host if we want to
+ * override the Configuration File in flash.
+ */
+ rv = csio_hw_use_fwconfig(hw, reset, param);
+ if (rv == -ENOENT) {
+ csio_info(hw, "Could not initialize "
+ "adapter, error%d\n", rv);
goto out;
+ }
+ if (rv != 0) {
+ csio_info(hw, "Could not initialize "
+ "adapter, error%d\n", rv);
+ goto out;
+ }
} else {
if (hw->fw_state == CSIO_DEV_STATE_INIT) {
projects / cascardo / linux.git / commitdiff