regulator: fixed: Use core GPIO enable support

This is essentially the code that was factored out into the core when the
feature was implemented.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 5adc35a..1a0b17e 100644 (file)
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -35,9 +35,6 @@ struct fixed_voltage_data {
        struct regulator_desc desc;
        struct regulator_dev *dev;
        int microvolts;
-       int gpio;
-       bool enable_high;
-       bool is_enabled;
 };
 
 
@@ -108,33 +105,6 @@ of_get_fixed_voltage_config(struct device *dev)
        return config;
 }
 
-static int fixed_voltage_is_enabled(struct regulator_dev *dev)
-{
-       struct fixed_voltage_data *data = rdev_get_drvdata(dev);
-
-       return data->is_enabled;
-}
-
-static int fixed_voltage_enable(struct regulator_dev *dev)
-{
-       struct fixed_voltage_data *data = rdev_get_drvdata(dev);
-
-       gpio_set_value_cansleep(data->gpio, data->enable_high);
-       data->is_enabled = true;
-
-       return 0;
-}
-
-static int fixed_voltage_disable(struct regulator_dev *dev)
-{
-       struct fixed_voltage_data *data = rdev_get_drvdata(dev);
-
-       gpio_set_value_cansleep(data->gpio, !data->enable_high);
-       data->is_enabled = false;
-
-       return 0;
-}
-
 static int fixed_voltage_get_voltage(struct regulator_dev *dev)
 {
        struct fixed_voltage_data *data = rdev_get_drvdata(dev);
@@ -156,14 +126,6 @@ static int fixed_voltage_list_voltage(struct regulator_dev *dev,
        return data->microvolts;
 }
 
-static struct regulator_ops fixed_voltage_gpio_ops = {
-       .is_enabled = fixed_voltage_is_enabled,
-       .enable = fixed_voltage_enable,
-       .disable = fixed_voltage_disable,
-       .get_voltage = fixed_voltage_get_voltage,
-       .list_voltage = fixed_voltage_list_voltage,
-};
-
 static struct regulator_ops fixed_voltage_ops = {
        .get_voltage = fixed_voltage_get_voltage,
        .list_voltage = fixed_voltage_list_voltage,
@@ -203,6 +165,7 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
        }
        drvdata->desc.type = REGULATOR_VOLTAGE;
        drvdata->desc.owner = THIS_MODULE;
+       drvdata->desc.ops = &fixed_voltage_ops;
 
        drvdata->desc.enable_time = config->startup_delay;
 
@@ -210,53 +173,25 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
                drvdata->desc.n_voltages = 1;
 
        drvdata->microvolts = config->microvolts;
-       drvdata->gpio = config->gpio;
-
-       if (gpio_is_valid(config->gpio)) {
-               int gpio_flag;
-               drvdata->enable_high = config->enable_high;
-
-               /* FIXME: Remove below print warning
-                *
-                * config->gpio must be set to -EINVAL by platform code if
-                * GPIO control is not required. However, early adopters
-                * not requiring GPIO control may forget to initialize
-                * config->gpio to -EINVAL. This will cause GPIO 0 to be used
-                * for GPIO control.
-                *
-                * This warning will be removed once there are a couple of users
-                * for this driver.
-                */
-               if (!config->gpio)
-                       dev_warn(&pdev->dev,
-                               "using GPIO 0 for regulator enable control\n");
-
-               /*
-                * set output direction without changing state
-                * to prevent glitch
-                */
-               drvdata->is_enabled = config->enabled_at_boot;
-               ret = drvdata->is_enabled ?
-                               config->enable_high : !config->enable_high;
-               gpio_flag = ret ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-
-               if (config->gpio_is_open_drain)
-                       gpio_flag |= GPIOF_OPEN_DRAIN;
-
-               ret = gpio_request_one(config->gpio, gpio_flag,
-                                               config->supply_name);
-               if (ret) {
-                       dev_err(&pdev->dev,
-                          "Could not obtain regulator enable GPIO %d: %d\n",
-                                                       config->gpio, ret);
-                       goto err_name;
-               }
-
-               drvdata->desc.ops = &fixed_voltage_gpio_ops;
 
+       if (config->gpio >= 0)
+               cfg.ena_gpio = config->gpio;
+       cfg.ena_gpio_invert = !config->enable_high;
+       if (config->enabled_at_boot) {
+               if (config->enable_high) {
+                       cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+               } else {
+                       cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+               }
        } else {
-               drvdata->desc.ops = &fixed_voltage_ops;
+               if (config->enable_high) {
+                       cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+               } else {
+                       cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+               }
        }
+       if (config->gpio_is_open_drain)
+               cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
 
        cfg.dev = &pdev->dev;
        cfg.init_data = config->init_data;
@@ -267,7 +202,7 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
        if (IS_ERR(drvdata->dev)) {
                ret = PTR_ERR(drvdata->dev);
                dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
-               goto err_gpio;
+               goto err_name;
        }
 
        platform_set_drvdata(pdev, drvdata);
@@ -277,9 +212,6 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 
        return 0;
 
-err_gpio:
-       if (gpio_is_valid(config->gpio))
-               gpio_free(config->gpio);
 err_name:
        kfree(drvdata->desc.name);
 err:
@@ -291,8 +223,6 @@ static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
        struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
 
        regulator_unregister(drvdata->dev);
-       if (gpio_is_valid(drvdata->gpio))
-               gpio_free(drvdata->gpio);
        kfree(drvdata->desc.name);
 
        return 0;