i2c: davinci: use bus recovery infrastructure

This patch converts Davinci I2C driver to use I2C bus recovery
infrastructure, introduced by commit 5f9296ba21b3 ("i2c: Add
bus recovery infrastructure").

The i2c_bus_recovery_info is configured for Davinci I2C adapter
only in case scl_pin is provided in platform data.

As the controller must be held in reset while doing so, the
recovery routine must re-init the controller. Since this was already
being done after each call to i2c_recover_bus, move those calls into
the recovery_prepare/unprepare routines and as well.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 120a4ef..54819fb 100644 (file)
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -129,43 +129,6 @@ static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
        return readw_relaxed(i2c_dev->base + reg);
 }
 
-/* Generate a pulse on the i2c clock pin. */
-static void davinci_i2c_clock_pulse(unsigned int scl_pin)
-{
-       u16 i;
-
-       if (scl_pin) {
-               /* Send high and low on the SCL line */
-               for (i = 0; i < 9; i++) {
-                       gpio_set_value(scl_pin, 0);
-                       udelay(20);
-                       gpio_set_value(scl_pin, 1);
-                       udelay(20);
-               }
-       }
-}
-
-/* This routine does i2c bus recovery as specified in the
- * i2c protocol Rev. 03 section 3.16 titled "Bus clear"
- */
-static void davinci_i2c_recover_bus(struct davinci_i2c_dev *dev)
-{
-       u32 flag = 0;
-       struct davinci_i2c_platform_data *pdata = dev->pdata;
-
-       dev_err(dev->dev, "initiating i2c bus recovery\n");
-       /* Send NACK to the slave */
-       flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
-       flag |=  DAVINCI_I2C_MDR_NACK;
-       /* write the data into mode register */
-       davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-       davinci_i2c_clock_pulse(pdata->scl_pin);
-       /* Send STOP */
-       flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
-       flag |= DAVINCI_I2C_MDR_STP;
-       davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-}
-
 static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
                                                                int val)
 {
@@ -262,6 +225,34 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
        return 0;
 }
 
+/*
+ * This routine does i2c bus recovery by using i2c_generic_gpio_recovery
+ * which is provided by I2C Bus recovery infrastructure.
+ */
+static void davinci_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+       struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+       /* Disable interrupts */
+       davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, 0);
+
+       /* put I2C into reset */
+       davinci_i2c_reset_ctrl(dev, 0);
+}
+
+static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+       struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+       i2c_davinci_init(dev);
+}
+
+static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = {
+       .recover_bus = i2c_generic_gpio_recovery,
+       .prepare_recovery = davinci_i2c_prepare_recovery,
+       .unprepare_recovery = davinci_i2c_unprepare_recovery,
+};
+
 /*
  * Waiting for bus not busy
  */
@@ -282,8 +273,7 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
                                return -ETIMEDOUT;
                        } else {
                                to_cnt = 0;
-                               davinci_i2c_recover_bus(dev);
-                               i2c_davinci_init(dev);
+                               i2c_recover_bus(&dev->adapter);
                        }
                }
                if (allow_sleep)
@@ -372,8 +362,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
                                                dev->adapter.timeout);
        if (!time_left) {
                dev_err(dev->dev, "controller timed out\n");
-               davinci_i2c_recover_bus(dev);
-               i2c_davinci_init(dev);
+               i2c_recover_bus(adap);
                dev->buf_len = 0;
                return -ETIMEDOUT;
        }
@@ -712,6 +701,12 @@ static int davinci_i2c_probe(struct platform_device *pdev)
        adap->timeout = DAVINCI_I2C_TIMEOUT;
        adap->dev.of_node = pdev->dev.of_node;
 
+       if (dev->pdata->scl_pin) {
+               adap->bus_recovery_info = &davinci_i2c_gpio_recovery_info;
+               adap->bus_recovery_info->scl_gpio = dev->pdata->scl_pin;
+               adap->bus_recovery_info->sda_gpio = dev->pdata->sda_pin;
+       }
+
        adap->nr = pdev->id;
        r = i2c_add_numbered_adapter(adap);
        if (r) {