staging: rts5139: remove unused variable in rts51x_chip.h
authorOleksij Rempel <bug-track@fisher-privat.net>
Thu, 10 May 2012 07:59:38 +0000 (09:59 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 10 May 2012 16:57:21 +0000 (09:57 -0700)
the SENSE_TYPE_FORMAT_IN_PROGRESS was checked by rts51x_scsi.c
but never set.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/rts5139/rts51x_chip.h
drivers/staging/rts5139/rts51x_scsi.c

index 175ea79..6755816 100644 (file)
@@ -75,7 +75,6 @@
 
 #define MAX_ALLOWED_LUN_CNT    8
 #define CMD_BUF_LEN            1024
-#define RSP_BUF_LEN            1024
 #define POLLING_INTERVAL       50      /* 50ms */
 
 #define XD_FREE_TABLE_CNT      1200
 #endif
 
 #define STATUS_FAIL            1
-#define STATUS_READ_FAIL       2
-#define STATUS_WRITE_FAIL      3
 #define STATUS_TIMEDOUT                4
 #define STATUS_NOMEM           5
 #define STATUS_TRANS_SHORT     6
 
 #define IDLE_MAX_COUNT         10
 #define POLLING_WAIT_CNT       1
-#define DELINK_DELAY           100
-#define LED_TOGGLE_INTERVAL    6
 #define LED_GPIO               0
 
 /* package */
 #define TRANSPORT_GOOD         0
 /* Transport good, command failed */
 #define TRANSPORT_FAILED       1
-/* Command failed, no auto-sense */
-#define TRANSPORT_NO_SENSE     2
 /* Transport bad (i.e. device dead) */
 #define TRANSPORT_ERROR                3
 
@@ -189,7 +182,6 @@ struct trace_msg_t {
 #define        SENSE_TYPE_MEDIA_INVALID_CMD_FIELD              6
 #define        SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR             7
 #define        SENSE_TYPE_MEDIA_WRITE_ERR                      8
-#define SENSE_TYPE_FORMAT_IN_PROGRESS                  9
 #define SENSE_TYPE_FORMAT_CMD_FAILED                   10
 #ifdef SUPPORT_MAGIC_GATE
 /* COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED */
@@ -203,77 +195,25 @@ struct trace_msg_t {
 #endif
 
 /*---- sense key ----*/
-#define ILI                     0x20   /* ILI bit is on                    */
-
-#define NO_SENSE                0x00   /* not exist sense key              */
-#define RECOVER_ERR             0x01   /* Target/Logical unit is recoverd  */
-#define NOT_READY               0x02   /* Logical unit is not ready        */
-#define MEDIA_ERR               0x03   /* medium/data error                */
-#define HARDWARE_ERR            0x04   /* hardware error                   */
 #define ILGAL_REQ               0x05   /* CDB/parameter/identify msg error */
-#define UNIT_ATTENTION          0x06   /* unit attention condition occur   */
-#define DAT_PRTCT               0x07   /* read/write is desable            */
-#define BLNC_CHK                0x08   /* find blank/DOF in read           */
-                                       /* write to unblank area            */
-#define CPY_ABRT                0x0a   /* Copy/Compare/Copy&Verify illgal  */
-#define ABRT_CMD                0x0b   /* Target make the command in error */
-#define EQUAL                   0x0c   /* Search Data end with Equal       */
-#define VLM_OVRFLW              0x0d   /* Some data are left in buffer     */
-#define MISCMP                  0x0e   /* find inequality                  */
 
 /*-----------------------------------
     SENSE_DATA
 -----------------------------------*/
-/*---- valid ----*/
-#define SENSE_VALID             0x80   /* Sense data is valid as SCSI2     */
-#define SENSE_INVALID           0x00   /* Sense data is invalid as SCSI2   */
 
 /*---- error code ----*/
 #define CUR_ERR                 0x70   /* current error                    */
-#define DEF_ERR                 0x71   /* specific command error           */
 
-/*---- sense key Information ----*/
-#define SNSKEYINFO_LEN          3      /* length of sense key information   */
+/*---- sense key Infomation ----*/
 
 #define SKSV                    0x80
 #define CDB_ILLEGAL             0x40
-#define DAT_ILLEGAL             0x00
-#define BPV                     0x08
-#define BIT_ILLEGAL0            0      /* bit0 is illegal                  */
-#define BIT_ILLEGAL1            1      /* bit1 is illegal                  */
-#define BIT_ILLEGAL2            2      /* bit2 is illegal                  */
-#define BIT_ILLEGAL3            3      /* bit3 is illegal                  */
-#define BIT_ILLEGAL4            4      /* bit4 is illegal                  */
-#define BIT_ILLEGAL5            5      /* bit5 is illegal                  */
-#define BIT_ILLEGAL6            6      /* bit6 is illegal                  */
-#define BIT_ILLEGAL7            7      /* bit7 is illegal                  */
 
 /*---- ASC ----*/
-#define ASC_NO_INFO             0x00
-#define ASC_MISCMP              0x1d
 #define ASC_INVLD_CDB           0x24
-#define ASC_INVLD_PARA          0x26
-#define ASC_LU_NOT_READY       0x04
-#define ASC_WRITE_ERR           0x0c
-#define ASC_READ_ERR            0x11
-#define ASC_LOAD_EJCT_ERR       0x53
-#define        ASC_MEDIA_NOT_PRESENT   0x3A
-#define        ASC_MEDIA_CHANGED       0x28
-#define        ASC_MEDIA_IN_PROCESS    0x04
-#define        ASC_WRITE_PROTECT       0x27
-#define ASC_LUN_NOT_SUPPORTED  0x25
 
 /*---- ASQC ----*/
-#define ASCQ_NO_INFO            0x00
-#define        ASCQ_MEDIA_IN_PROCESS   0x01
-#define ASCQ_MISCMP             0x00
 #define ASCQ_INVLD_CDB          0x00
-#define ASCQ_INVLD_PARA         0x02
-#define ASCQ_LU_NOT_READY      0x02
-#define ASCQ_WRITE_ERR          0x02
-#define ASCQ_READ_ERR           0x00
-#define ASCQ_LOAD_EJCT_ERR      0x00
-#define        ASCQ_WRITE_PROTECT      0x00
 
 struct sense_data_t {
        unsigned char err_code; /* error code */
index a5c7a06..e07a1f4 100644 (file)
@@ -369,10 +369,6 @@ void set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type)
                               ASC_INVLD_CDB, ASCQ_INVLD_CDB, CDB_ILLEGAL, 1);
                break;
 
-       case SENSE_TYPE_FORMAT_IN_PROGRESS:
-               set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04, 0, 0);
-               break;
-
        case SENSE_TYPE_FORMAT_CMD_FAILED:
                set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x31, 0x01, 0, 0);
                break;