mtd: mxc-nand: Do the word to byte mangling in the read_byte callback
authorUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tue, 10 Feb 2015 18:59:57 +0000 (19:59 +0100)
committerBrian Norris <computersforpeace@gmail.com>
Wed, 11 Mar 2015 22:20:29 +0000 (15:20 -0700)
When the hardware operates in 16 bit mode it always reads 16 bits even
for operations that only have the lower 8 bits defined. So the upper
bits must be discarded. Do this in the read_byte callback instead of
when reading the NAND id to support reading byte wise more than 5 bytes
and at other occations (like reading the ONFI parameter page).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
drivers/mtd/nand/mxc_nand.c

index d9637ae..aa98a0d 100644 (file)
@@ -552,30 +552,17 @@ static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
 
 static void send_read_id_v3(struct mxc_nand_host *host)
 {
-       struct nand_chip *this = &host->nand;
-
        /* Read ID into main buffer */
        writel(NFC_ID, NFC_V3_LAUNCH);
 
        wait_op_done(host, true);
 
        memcpy32_fromio(host->data_buf, host->main_area0, 16);
-
-       if (this->options & NAND_BUSWIDTH_16) {
-               /* compress the ID info */
-               host->data_buf[1] = host->data_buf[2];
-               host->data_buf[2] = host->data_buf[4];
-               host->data_buf[3] = host->data_buf[6];
-               host->data_buf[4] = host->data_buf[8];
-               host->data_buf[5] = host->data_buf[10];
-       }
 }
 
 /* Request the NANDFC to perform a read of the NAND device ID. */
 static void send_read_id_v1_v2(struct mxc_nand_host *host)
 {
-       struct nand_chip *this = &host->nand;
-
        /* NANDFC buffer 0 is used for device ID output */
        writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
 
@@ -585,15 +572,6 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host)
        wait_op_done(host, true);
 
        memcpy32_fromio(host->data_buf, host->main_area0, 16);
-
-       if (this->options & NAND_BUSWIDTH_16) {
-               /* compress the ID info */
-               host->data_buf[1] = host->data_buf[2];
-               host->data_buf[2] = host->data_buf[4];
-               host->data_buf[3] = host->data_buf[6];
-               host->data_buf[4] = host->data_buf[8];
-               host->data_buf[5] = host->data_buf[10];
-       }
 }
 
 static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
@@ -719,9 +697,17 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
        if (host->status_request)
                return host->devtype_data->get_dev_status(host) & 0xFF;
 
-       ret = *(uint8_t *)(host->data_buf + host->buf_start);
-       host->buf_start++;
+       if (nand_chip->options & NAND_BUSWIDTH_16) {
+               /* only take the lower byte of each word */
+               ret = *(uint16_t *)(host->data_buf + host->buf_start);
+
+               host->buf_start += 2;
+       } else {
+               ret = *(uint8_t *)(host->data_buf + host->buf_start);
+               host->buf_start++;
+       }
 
+       pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
        return ret;
 }