drm/i915: fix dvo DPLL regression
authorDaniel Vetter <daniel.vetter@ffwll.ch>
Sat, 6 Jul 2013 10:52:05 +0000 (12:52 +0200)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Mon, 8 Jul 2013 20:04:37 +0000 (22:04 +0200)
I've missed that intel_dvo_mode_set changes the dpll configuration.
Hence when I've reworked the sequence to only enable the dpll in the
crtc_enable callback in

commit 66e3d5c09940d08d94b03e65b420fadaa7484318
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jun 16 21:24:16 2013 +0200

    drm/i915: move i9xx dpll enabling into crtc enable function

that special DVO bit was lost. Some BSpec reading confirms that it's
only needed for DVO encoders. Section 1.5.4, "DPLL A Control Register"
for bit 30:

"2X Clock Enable. When driving In non-gang DVO modes such as a
connected flat panel or TV, a 2X" version of the clock is needed. When
not using the 2X output it should be disabled. This bit cannot be set
when driving the integrated LVDS port on devices such as Montara-GM."

Fix this regression up.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66516
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Partially-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dvo.c

index 9b51be8..e9c50fa 100644 (file)
 #define _DPLL_B        (dev_priv->info->display_mmio_offset + 0x6018)
 #define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B)
 #define   DPLL_VCO_ENABLE              (1 << 31)
-#define   DPLL_DVO_HIGH_SPEED          (1 << 30)
+#define   DPLL_SDVO_HIGH_SPEED         (1 << 30)
+#define   DPLL_DVO_2X_MODE             (1 << 30)
 #define   DPLL_EXT_BUFFER_ENABLE_VLV   (1 << 30)
 #define   DPLL_SYNCLOCK_ENABLE         (1 << 29)
 #define   DPLL_REFA_CLK_ENABLE_VLV     (1 << 29)
index a45bb92..41efd35 100644 (file)
@@ -4544,10 +4544,10 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
        }
 
        if (is_sdvo)
-               dpll |= DPLL_DVO_HIGH_SPEED;
+               dpll |= DPLL_SDVO_HIGH_SPEED;
 
        if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
-               dpll |= DPLL_DVO_HIGH_SPEED;
+               dpll |= DPLL_SDVO_HIGH_SPEED;
 
        /* compute bitmask from p1 value */
        if (IS_PINEVIEW(dev))
@@ -4619,6 +4619,9 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
                        dpll |= PLL_P2_DIVIDE_BY_4;
        }
 
+       if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+               dpll |= DPLL_DVO_2X_MODE;
+
        if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
                 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
                dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
@@ -5650,9 +5653,9 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
                << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 
        if (is_sdvo)
-               dpll |= DPLL_DVO_HIGH_SPEED;
+               dpll |= DPLL_SDVO_HIGH_SPEED;
        if (intel_crtc->config.has_dp_encoder)
-               dpll |= DPLL_DVO_HIGH_SPEED;
+               dpll |= DPLL_SDVO_HIGH_SPEED;
 
        /* compute bitmask from p1 value */
        dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
index eb2020e..cbbc49d 100644 (file)
@@ -283,7 +283,6 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
        int pipe = intel_crtc->pipe;
        u32 dvo_val;
        u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
-       int dpll_reg = DPLL(pipe);
 
        switch (dvo_reg) {
        case DVOA:
@@ -314,8 +313,6 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
        if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
                dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
 
-       I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED);
-
        /*I915_WRITE(DVOB_SRCDIM,
          (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
          (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/