E: dipankar@in.ibm.com
D: RCU
+N: Yoshinori Sato
+E: ysato@users.sourceforge.jp
+D: uClinux for Renesas H8/300 (H8300)
+D: http://uclinux-h8.sourceforge.jp/
+
N: Hannu Savolainen
E: hannu@opensound.com
D: Maintainer of the sound drivers until 2.1.x days.
Possible arch problems I found (and either tried to fix or didn't):
-h8300 - Is such sleeping racy vs interrupts? (See #4a).
- The H8/300 manual I found indicates yes, however disabling IRQs
- over the sleep mean only NMIs can wake it up, so can't fix easily
- without doing spin waiting.
-
ia64 - is safe_halt call racy vs interrupts? (does it sleep?) (See #4a)
sh64 - Is sleeping racy vs interrupts? (See #4a)
F: arch/m68k/*/*_no.*
F: arch/m68k/include/asm/*_no.*
-UCLINUX FOR RENESAS H8/300 (H8300)
-M: Yoshinori Sato <ysato@users.sourceforge.jp>
-W: http://uclinux-h8.sourceforge.jp/
-S: Supported
-F: arch/h8300/
-F: drivers/ide/ide-h8300.c
-F: drivers/net/ethernet/8390/ne-h8300.c
-
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
S: Maintained
+++ /dev/null
-config H8300
- bool
- default y
- select HAVE_IDE
- select GENERIC_ATOMIC64
- select HAVE_UID16
- select VIRT_TO_BUS
- select ARCH_WANT_IPC_PARSE_VERSION
- select GENERIC_IRQ_SHOW
- select GENERIC_CPU_DEVICES
- select MODULES_USE_ELF_RELA
- select OLD_SIGSUSPEND3
- select OLD_SIGACTION
- select HAVE_UNDERSCORE_SYMBOL_PREFIX
-
-config MMU
- bool
- default n
-
-config SWAP
- bool
- default n
-
-config ZONE_DMA
- bool
- default y
-
-config FPU
- bool
- default n
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- default n
-
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config GENERIC_BUG
- bool
- depends on BUG
-
-config TIME_LOW_RES
- bool
- default y
-
-config NO_IOPORT
- def_bool y
-
-config NO_DMA
- def_bool y
-
-config ISA
- bool
- default y
-
-config PCI
- bool
- default n
-
-config HZ
- int
- default 100
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-source "arch/h8300/Kconfig.cpu"
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "arch/h8300/Kconfig.ide"
-
-source "fs/Kconfig"
-
-source "arch/h8300/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
+++ /dev/null
-menu "Processor type and features"
-
-choice
- prompt "H8/300 platform"
- default H8300H_GENERIC
-
-config H8300H_GENERIC
- bool "H8/300H Generic"
- help
- H8/300H CPU Generic Hardware Support
-
-config H8300H_AKI3068NET
- bool "AE-3068/69"
- select H83068
- help
- AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
- More Information. (Japanese Only)
- <http://akizukidenshi.com/catalog/default.aspx>
- AE-3068/69 Evaluation Board Support
- More Information.
- <http://www.microtronique.com/ae3069lan.htm>
-
-config H8300H_H8MAX
- bool "H8MAX"
- select H83068
- help
- H8MAX Evaluation Board Support
- More Information. (Japanese Only)
- <http://strawberry-linux.com/h8/index.html>
-
-config H8300H_SIM
- bool "H8/300H Simulator"
- select H83007
- help
- GDB Simulator Support
- More Information.
- <http://sourceware.org/sid/>
-
-config H8S_GENERIC
- bool "H8S Generic"
- help
- H8S CPU Generic Hardware Support
-
-config H8S_EDOSK2674
- bool "EDOSK-2674"
- select H8S2678
- help
- Renesas EDOSK-2674 Evaluation Board Support
- More Information.
- <http://www.azpower.com/H8-uClinux/index.html>
- <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
-
-config H8S_SIM
- bool "H8S Simulator"
- help
- GDB Simulator Support
- More Information.
- <http://sourceware.org/sid/>
-
-endchoice
-
-choice
- prompt "CPU Selection"
-
-config H83002
- bool "H8/3001,3002,3003"
- depends on BROKEN
- select CPU_H8300H
-
-config H83007
- bool "H8/3006,3007"
- select CPU_H8300H
-
-config H83048
- bool "H8/3044,3045,3046,3047,3048,3052"
- depends on BROKEN
- select CPU_H8300H
-
-config H83068
- bool "H8/3065,3066,3067,3068,3069"
- select CPU_H8300H
-
-config H8S2678
- bool "H8S/2670,2673,2674R,2675,2676"
- select CPU_H8S
-
-endchoice
-
-config CPU_CLOCK
- int "CPU Clock Frequency (/1KHz)"
- default "20000"
- help
- CPU Clock Frequency divide to 1000
-
-choice
- prompt "Kernel executes from"
- ---help---
- Choose the memory type that the kernel will be running in.
-
-config RAMKERNEL
- bool "RAM"
- help
- The kernel will be resident in RAM when running.
-
-config ROMKERNEL
- bool "ROM"
- help
- The kernel will be resident in FLASH/ROM when running.
-endchoice
-
-
-config CPU_H8300H
- bool
- depends on (H83002 || H83007 || H83048 || H83068)
- default y
-
-config CPU_H8S
- bool
- depends on H8S2678
- default y
-
-choice
- prompt "Timer"
-config H8300_TIMER8
- bool "8bit timer (2ch cascade)"
- depends on (H83007 || H83068 || H8S2678)
-
-config H8300_TIMER16
- bool "16bit timer"
- depends on (H83007 || H83068)
-
-config H8300_ITU
- bool "ITU"
- depends on (H83002 || H83048)
-
-config H8300_TPU
- bool "TPU"
- depends on H8S2678
-endchoice
-
-if H8300_TIMER8
-choice
- prompt "Timer Channel"
-config H8300_TIMER8_CH0
- bool "Channel 0"
-config H8300_TIMER8_CH2
- bool "Channel 2"
- depends on CPU_H8300H
-endchoice
-endif
-
-config H8300_TIMER16_CH
- int "16bit timer channel (0 - 2)"
- depends on H8300_TIMER16
- range 0 2
-
-config H8300_ITU_CH
- int "ITU channel"
- depends on H8300_ITU
- range 0 4
-
-config H8300_TPU_CH
- int "TPU channel"
- depends on H8300_TPU
- range 0 4
-
-source "kernel/Kconfig.preempt"
-
-source "mm/Kconfig"
-
-endmenu
+++ /dev/null
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config FULLDEBUG
- bool "Full Symbolic/Source Debugging support"
- help
- Enable debugging symbols on kernel build.
-
-config HIGHPROFILE
- bool "Use fast second timer for profiling"
- help
- Use a fast secondary clock to produce profiling information.
-
-config NO_KERNEL_MSG
- bool "Suppress Kernel BUG Messages"
- help
- Do not output any debug BUG messages within the kernel.
-
-config GDB_MAGICPRINT
- bool "Message Output for GDB MagicPrint service"
- depends on (H8300H_SIM || H8S_SIM)
- help
- kernel messages output using MagicPrint service from GDB
-
-config SYSCALL_PRINT
- bool "SystemCall trace print"
- help
- output history of systemcall
-
-config GDB_DEBUG
- bool "Use gdb stub"
- depends on (!H8300H_SIM && !H8S_SIM)
- help
- gdb stub exception support
-
-config SH_STANDARD_BIOS
- bool "Use gdb protocol serial console"
- depends on (!H8300H_SIM && !H8S_SIM)
- help
- serial console output using GDB protocol.
- Require eCos/RedBoot
-
-config DEFAULT_CMDLINE
- bool "Use builtin commandline"
- default n
- help
- builtin kernel commandline enabled.
-
-config KERNEL_COMMAND
- string "Buildin command string"
- depends on DEFAULT_CMDLINE
- help
- builtin kernel commandline strings.
-
-config BLKDEV_RESERVE
- bool "BLKDEV Reserved Memory"
- default n
- help
- Reserved BLKDEV area.
-
-config BLKDEV_RESERVE_ADDRESS
- hex 'start address'
- depends on BLKDEV_RESERVE
- help
- BLKDEV start address.
-
-endmenu
+++ /dev/null
-# uClinux H8/300 Target Board Selection Menu (IDE)
-
-if (H8300H_AKI3068NET)
-menu "IDE Extra configuration"
-
-config H8300_IDE_BASE
- hex "IDE register base address"
- depends on IDE
- default 0
- help
- IDE registers base address
-
-config H8300_IDE_ALT
- hex "IDE register alternate address"
- depends on IDE
- default 0
- help
- IDE alternate registers address
-
-config H8300_IDE_IRQ
- int "IDE IRQ no"
- depends on IDE
- default 0
- help
- IDE use IRQ no
-endmenu
-endif
-
-if (H8300H_H8MAX)
-config H8300_IDE_BASE
- hex
- depends on IDE
- default 0x200000
-
-config H8300_IDE_ALT
- hex
- depends on IDE
- default 0x60000c
-
-config H8300_IDE_IRQ
- int
- depends on IDE
- default 5
-endif
+++ /dev/null
-#
-# arch/h8300/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp>
-#
-
-platform-$(CONFIG_CPU_H8300H) := h8300h
-platform-$(CONFIG_CPU_H8S) := h8s
-PLATFORM := $(platform-y)
-
-board-$(CONFIG_H8300H_GENERIC) := generic
-board-$(CONFIG_H8300H_AKI3068NET) := aki3068net
-board-$(CONFIG_H8300H_H8MAX) := h8max
-board-$(CONFIG_H8300H_SIM) := generic
-board-$(CONFIG_H8S_GENERIC) := generic
-board-$(CONFIG_H8S_EDOSK2674) := edosk2674
-board-$(CONFIG_H8S_SIM) := generic
-BOARD := $(board-y)
-
-model-$(CONFIG_RAMKERNEL) := ram
-model-$(CONFIG_ROMKERNEL) := rom
-MODEL := $(model-y)
-
-cflags-$(CONFIG_CPU_H8300H) := -mh
-ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf
-cflags-$(CONFIG_CPU_H8S) := -ms
-ldflags-$(CONFIG_CPU_H8S) := -mh8300self
-
-KBUILD_CFLAGS += $(cflags-y)
-KBUILD_CFLAGS += -mint32 -fno-builtin
-KBUILD_CFLAGS += -g
-KBUILD_CFLAGS += -D__linux__
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-KBUILD_AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y)
-LDFLAGS += $(ldflags-y)
-
-CROSS_COMPILE = h8300-elf-
-LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-head-y := arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/crt0_$(MODEL).o
-
-core-y += arch/$(ARCH)/kernel/ \
- arch/$(ARCH)/mm/
-ifdef PLATFORM
-core-y += arch/$(ARCH)/platform/$(PLATFORM)/ \
- arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/
-endif
-
-libs-y += arch/$(ARCH)/lib/ $(LIBGCC)
-
-boot := arch/h8300/boot
-
-export MODEL PLATFORM BOARD
-
-archmrproper:
-
-archclean:
- $(Q)$(MAKE) $(clean)=$(boot)
-
-vmlinux.srec vmlinux.bin zImage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-define archhelp
- @echo 'vmlinux.bin - Create raw binary'
- @echo 'vmlinux.srec - Create srec binary'
- @echo 'zImage - Compressed kernel image'
-endef
+++ /dev/null
-linux-2.6 for H8/300 README
-Yoshinori Sato <ysato@users.sourceforge.jp>
-
-* Supported CPU
-H8/300H and H8S
-
-* Supported Target
-1.simulator of GDB
- require patches.
-
-2.AE 3068/AE 3069
- more information
- MICROTRONIQUE <http://www.microtronique.com/>
- Akizuki Denshi Tsusho Ltd. <http://akizukidenshi.com/> (Japanese Only)
-
-3.H8MAX
- see http://ip-sol.jp/h8max/ (Japanese Only)
-
-4.EDOSK2674
- see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html
- http://www.uclinux.org/pub/uClinux/ports/h8/HITACHI-EDOSK2674-HOWTO
- http://www.azpower.com/H8-uClinux/
-
-* Toolchain Version
-gcc-3.1 or higher and patch
-see arch/h8300/tools_patch/README
-binutils-2.12 or higher
-gdb-5.2 or higher
-The environment that can compile a h8300-elf binary is necessary.
-
-* Userland Develop environment
-used h8300-elf toolchains.
-see http://www.uclinux.org/pub/uClinux/ports/h8/
-
-* A few words of thanks
-Porting to H8/300 serieses is support of Information-technology Promotion Agency, Japan.
-I thank support.
-and All developer/user.
+++ /dev/null
-# arch/h8300/boot/Makefile
-
-targets := vmlinux.srec vmlinux.bin zImage
-subdir- := compressed
-
-OBJCOPYFLAGS_vmlinux.srec := -Osrec
-OBJCOPYFLAGS_vmlinux.bin := -Obinary
-OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
-
-$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo 'Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
-
+++ /dev/null
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-asflags-y := -traditional
-
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-# Assign dummy values if these 2 variables are not defined,
-# in order to suppress error message.
-#
-CONFIG_MEMORY_START ?= 0x00400000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
-IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
-
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
- $(call if_changed,ld)
- @:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300 -T
-OBJCOPYFLAGS := -O binary
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,ld)
+++ /dev/null
-/*
- * linux/arch/h8300/boot/compressed/head.S
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-
- .h8300h
-#include <linux/linkage.h>
-
-#define SRAM_START 0xff4000
-
- .section .text..startup
- .global startup
-startup:
- mov.l #SRAM_START+0x8000, sp
- mov.l #__sbss, er0
- mov.l #__ebss, er1
- sub.l er0, er1
- shlr er1
- shlr er1
- sub.l er2, er2
-1:
- mov.l er2, @er0
- adds #4, er0
- dec.l #1, er1
- bne 1b
- jsr @_decompress_kernel
- jmp @0x400000
-
- .align 9
-fake_headers_as_bzImage:
- .word 0
- .ascii "HdrS" ; header signature
- .word 0x0202 ; header version number (>= 0x0105)
- ; or else old loadlin-1.5 will fail)
- .word 0 ; default_switch
- .word 0 ; SETUPSEG
- .word 0x1000
- .word 0 ; pointing to kernel version string
- .byte 0 ; = 0, old one (LILO, Loadlin,
- ; 0xTV: T=0 for LILO
- ; V = version
- .byte 1 ; Load flags bzImage=1
- .word 0x8000 ; size to move, when setup is not
- .long 0x100000 ; 0x100000 = default for big kernel
- .long 0 ; address of loaded ramdisk image
- .long 0 ; its size in bytes
+++ /dev/null
-/*
- * arch/h8300/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for h8300 by Yoshinori Sato 2006
- */
-
-#include <asm/uaccess.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n) memset ((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-static unsigned insize = 0; /* valid bytes in inbuf */
-static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-
-extern char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#define HEAP_SIZE 0x10000
-
-#include "../../../../lib/inflate.c"
-
-#define SCR *((volatile unsigned char *)0xffff8a)
-#define TDR *((volatile unsigned char *)0xffff8b)
-#define SSR *((volatile unsigned char *)0xffff8c)
-
-int puts(const char *s)
-{
- return 0;
-}
-
-void* memset(void* s, int c, size_t n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
- return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
- if (insize != 0) {
- error("ran out of input data");
- }
-
- inbuf = input_data;
- insize = input_len;
- inptr = 1;
- return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted");
-
- while(1); /* Halt */
-}
-
-#define STACK_SIZE (4096)
-long user_stack [STACK_SIZE];
-long* stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
- output_data = 0;
- output_ptr = (unsigned long)0x400000;
- free_mem_ptr = (unsigned long)&_end;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
- makecrc();
- puts("Uncompressing Linux... ");
- gunzip();
- puts("Ok, booting the kernel.\n");
-}
+++ /dev/null
-SECTIONS
-{
- .text :
- {
- __stext = . ;
- __text = .;
- *(.text..startup)
- *(.text)
- __etext = . ;
- }
-
- .rodata :
- {
- *(.rodata)
- }
- .data :
-
- {
- __sdata = . ;
- ___data_start = . ;
- *(.data.*)
- }
- .bss :
- {
- . = ALIGN(0x4) ;
- __sbss = . ;
- *(.bss*)
- . = ALIGN(0x4) ;
- __ebss = . ;
- __end = . ;
- }
-}
+++ /dev/null
-SECTIONS
-{
- .data : {
- _input_len = .;
- LONG(_input_data_end - _input_data) _input_data = .;
- *(.data)
- _input_data_end = .;
- }
-}
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_H83007=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_UCLINUX=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
+++ /dev/null
-
-generic-y += clkdev.h
-generic-y += exec.h
-generic-y += linkage.h
-generic-y += mmu.h
-generic-y += module.h
-generic-y += trace_clock.h
-generic-y += xor.h
-generic-y += preempt.h
+++ /dev/null
-#include <generated/asm-offsets.h>
+++ /dev/null
-#ifndef __ARCH_H8300_ATOMIC__
-#define __ARCH_H8300_ATOMIC__
-
-#include <linux/types.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i) { (i) }
-
-#define atomic_read(v) (*(volatile int *)&(v)->counter)
-#define atomic_set(v, i) (((v)->counter) = i)
-
-#include <linux/kernel.h>
-
-static __inline__ int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- ret = v->counter += i;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_add(i, v) atomic_add_return(i, v)
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-
-static __inline__ int atomic_sub_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- ret = v->counter -= i;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_sub(i, v) atomic_sub_return(i, v)
-#define atomic_sub_and_test(i,v) (atomic_sub_return(i, v) == 0)
-
-static __inline__ int atomic_inc_return(atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- v->counter++;
- ret = v->counter;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_inc(v) atomic_inc_return(v)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-static __inline__ int atomic_dec_return(atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- --v->counter;
- ret = v->counter;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_dec(v) atomic_dec_return(v)
-
-static __inline__ int atomic_dec_and_test(atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- --v->counter;
- ret = v->counter;
- local_irq_restore(flags);
- return ret == 0;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (likely(ret == old))
- v->counter = new;
- local_irq_restore(flags);
- return ret;
-}
-
-static inline int __atomic_add_unless(atomic_t *v, int a, int u)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (ret != u)
- v->counter += a;
- local_irq_restore(flags);
- return ret;
-}
-
-static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("stc ccr,r1l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %0,er0\n\t"
- "and.l %1,er0\n\t"
- "mov.l er0,%0\n\t"
- "ldc r1l,ccr"
- : "=m" (*v) : "g" (~(mask)) :"er0","er1");
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("stc ccr,r1l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %0,er0\n\t"
- "or.l %1,er0\n\t"
- "mov.l er0,%0\n\t"
- "ldc r1l,ccr"
- : "=m" (*v) : "g" (mask) :"er0","er1");
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#endif /* __ARCH_H8300_ATOMIC __ */
+++ /dev/null
-#ifndef _H8300_BARRIER_H
-#define _H8300_BARRIER_H
-
-#define nop() asm volatile ("nop"::)
-
-/*
- * Force strict CPU ordering.
- * Not really required on H8...
- */
-#define mb() asm volatile ("" : : :"memory")
-#define rmb() asm volatile ("" : : :"memory")
-#define wmb() asm volatile ("" : : :"memory")
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-#endif
-
-#endif /* _H8300_BARRIER_H */
+++ /dev/null
-#ifndef _H8300_BITOPS_H
-#define _H8300_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- * Copyright 2002, Yoshinori Sato
- */
-
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-/*
- * Function prototypes to keep gcc -Wall happy
- */
-
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- */
-static __inline__ unsigned long ffz(unsigned long word)
-{
- unsigned long result;
-
- result = -1;
- __asm__("1:\n\t"
- "shlr.l %2\n\t"
- "adds #1,%0\n\t"
- "bcs 1b"
- : "=r" (result)
- : "0" (result),"r" (word));
- return result;
-}
-
-#define H8300_GEN_BITOP_CONST(OP,BIT) \
- case BIT: \
- __asm__(OP " #" #BIT ",@%0"::"r"(b_addr):"memory"); \
- break;
-
-#define H8300_GEN_BITOP(FNAME,OP) \
-static __inline__ void FNAME(int nr, volatile unsigned long* addr) \
-{ \
- volatile unsigned char *b_addr; \
- b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
- if (__builtin_constant_p(nr)) { \
- switch(nr & 7) { \
- H8300_GEN_BITOP_CONST(OP,0) \
- H8300_GEN_BITOP_CONST(OP,1) \
- H8300_GEN_BITOP_CONST(OP,2) \
- H8300_GEN_BITOP_CONST(OP,3) \
- H8300_GEN_BITOP_CONST(OP,4) \
- H8300_GEN_BITOP_CONST(OP,5) \
- H8300_GEN_BITOP_CONST(OP,6) \
- H8300_GEN_BITOP_CONST(OP,7) \
- } \
- } else { \
- __asm__(OP " %w0,@%1"::"r"(nr),"r"(b_addr):"memory"); \
- } \
-}
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-H8300_GEN_BITOP(set_bit ,"bset")
-H8300_GEN_BITOP(clear_bit ,"bclr")
-H8300_GEN_BITOP(change_bit,"bnot")
-#define __set_bit(nr,addr) set_bit((nr),(addr))
-#define __clear_bit(nr,addr) clear_bit((nr),(addr))
-#define __change_bit(nr,addr) change_bit((nr),(addr))
-
-#undef H8300_GEN_BITOP
-#undef H8300_GEN_BITOP_CONST
-
-static __inline__ int test_bit(int nr, const unsigned long* addr)
-{
- return (*((volatile unsigned char *)addr +
- ((nr >> 3) ^ 3)) & (1UL << (nr & 7))) != 0;
-}
-
-#define __test_bit(nr, addr) test_bit(nr, addr)
-
-#define H8300_GEN_TEST_BITOP_CONST_INT(OP,BIT) \
- case BIT: \
- __asm__("stc ccr,%w1\n\t" \
- "orc #0x80,ccr\n\t" \
- "bld #" #BIT ",@%4\n\t" \
- OP " #" #BIT ",@%4\n\t" \
- "rotxl.l %0\n\t" \
- "ldc %w1,ccr" \
- : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr) \
- : "memory"); \
- break;
-
-#define H8300_GEN_TEST_BITOP_CONST(OP,BIT) \
- case BIT: \
- __asm__("bld #" #BIT ",@%3\n\t" \
- OP " #" #BIT ",@%3\n\t" \
- "rotxl.l %0\n\t" \
- : "=r"(retval),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr) \
- : "memory"); \
- break;
-
-#define H8300_GEN_TEST_BITOP(FNNAME,OP) \
-static __inline__ int FNNAME(int nr, volatile void * addr) \
-{ \
- int retval = 0; \
- char ccrsave; \
- volatile unsigned char *b_addr; \
- b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
- if (__builtin_constant_p(nr)) { \
- switch(nr & 7) { \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,0) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,1) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,2) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,3) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,4) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,5) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,6) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,7) \
- } \
- } else { \
- __asm__("stc ccr,%w1\n\t" \
- "orc #0x80,ccr\n\t" \
- "btst %w5,@%4\n\t" \
- OP " %w5,@%4\n\t" \
- "beq 1f\n\t" \
- "inc.l #1,%0\n" \
- "1:\n\t" \
- "ldc %w1,ccr" \
- : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr),"r"(nr) \
- : "memory"); \
- } \
- return retval; \
-} \
- \
-static __inline__ int __ ## FNNAME(int nr, volatile void * addr) \
-{ \
- int retval = 0; \
- volatile unsigned char *b_addr; \
- b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
- if (__builtin_constant_p(nr)) { \
- switch(nr & 7) { \
- H8300_GEN_TEST_BITOP_CONST(OP,0) \
- H8300_GEN_TEST_BITOP_CONST(OP,1) \
- H8300_GEN_TEST_BITOP_CONST(OP,2) \
- H8300_GEN_TEST_BITOP_CONST(OP,3) \
- H8300_GEN_TEST_BITOP_CONST(OP,4) \
- H8300_GEN_TEST_BITOP_CONST(OP,5) \
- H8300_GEN_TEST_BITOP_CONST(OP,6) \
- H8300_GEN_TEST_BITOP_CONST(OP,7) \
- } \
- } else { \
- __asm__("btst %w4,@%3\n\t" \
- OP " %w4,@%3\n\t" \
- "beq 1f\n\t" \
- "inc.l #1,%0\n" \
- "1:" \
- : "=r"(retval),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr),"r"(nr) \
- : "memory"); \
- } \
- return retval; \
-}
-
-H8300_GEN_TEST_BITOP(test_and_set_bit, "bset")
-H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
-H8300_GEN_TEST_BITOP(test_and_change_bit,"bnot")
-#undef H8300_GEN_TEST_BITOP_CONST
-#undef H8300_GEN_TEST_BITOP_CONST_INT
-#undef H8300_GEN_TEST_BITOP
-
-#include <asm-generic/bitops/ffs.h>
-
-static __inline__ unsigned long __ffs(unsigned long word)
-{
- unsigned long result;
-
- result = -1;
- __asm__("1:\n\t"
- "shlr.l %2\n\t"
- "adds #1,%0\n\t"
- "bcc 1b"
- : "=r" (result)
- : "0"(result),"r"(word));
- return result;
-}
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/le.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _H8300_BITOPS_H */
+++ /dev/null
-
-/* Nothing for h8300 */
+++ /dev/null
-#ifndef _H8300_BUG_H
-#define _H8300_BUG_H
-
-/* always true */
-#define is_valid_bugaddr(addr) (1)
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-extern void die(const char *str, struct pt_regs *fp, unsigned long err);
-
-#endif
+++ /dev/null
-/*
- * include/asm-h8300/bugs.h
- *
- * Copyright (C) 1994 Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
+++ /dev/null
-#ifndef __ARCH_H8300_CACHE_H
-#define __ARCH_H8300_CACHE_H
-
-/* bytes per L1 cache line */
-#define L1_CACHE_SHIFT 2
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-/* m68k-elf-gcc 2.95.2 doesn't like these */
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif
+++ /dev/null
-#ifndef _H8300_CACHECTL_H
-#define _H8300_CACHECTL_H
-
-/* Definitions for the cacheflush system call. */
-
-#define FLUSH_SCOPE_LINE 0 /* Flush a cache line */
-#define FLUSH_SCOPE_PAGE 0 /* Flush a page */
-#define FLUSH_SCOPE_ALL 0 /* Flush the whole cache -- superuser only */
-
-#define FLUSH_CACHE_DATA 0 /* Writeback and flush data cache */
-#define FLUSH_CACHE_INSN 0 /* Flush instruction cache */
-#define FLUSH_CACHE_BOTH 0 /* Flush both caches */
-
-#endif /* _H8300_CACHECTL_H */
+++ /dev/null
-/*
- * (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#ifndef _ASM_H8300_CACHEFLUSH_H
-#define _ASM_H8300_CACHEFLUSH_H
-
-/*
- * Cache handling functions
- * No Cache memory all dummy functions
- */
-
-#define flush_cache_all()
-#define flush_cache_mm(mm)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma,a,b)
-#define flush_cache_page(vma,p,pfn)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)
-#define flush_dcache_mmap_lock(mapping)
-#define flush_dcache_mmap_unlock(mapping)
-#define flush_icache()
-#define flush_icache_page(vma,page)
-#define flush_icache_range(start,len)
-#define flush_cache_vmap(start, end)
-#define flush_cache_vunmap(start, end)
-#define cache_push_v(vaddr,len)
-#define cache_push(paddr,len)
-#define cache_clear(paddr,len)
-
-#define flush_dcache_range(a,b)
-
-#define flush_icache_user_range(vma,page,addr,len)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-#endif /* _ASM_H8300_CACHEFLUSH_H */
+++ /dev/null
-#ifndef _H8300_CHECKSUM_H
-#define _H8300_CHECKSUM_H
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- __asm__("mov.l %0,er0\n\t"
- "add.w e0,r0\n\t"
- "xor.w e0,e0\n\t"
- "rotxl.w e0\n\t"
- "add.w e0,r0\n\t"
- "sub.w e0,e0\n\t"
- "mov.l er0,%0"
- : "=r"(sum)
- : "0"(sum)
- : "er0");
- return (__force __sum16)~sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- __asm__ ("sub.l er0,er0\n\t"
- "add.l %2,%0\n\t"
- "addx #0,r0l\n\t"
- "add.l %3,%0\n\t"
- "addx #0,r0l\n\t"
- "add.l %4,%0\n\t"
- "addx #0,r0l\n\t"
- "add.l er0,%0\n\t"
- "bcc 1f\n\t"
- "inc.l #1,%0\n"
- "1:"
- : "=&r" (sum)
- : "0" (sum), "r" (daddr), "r" (saddr), "r" (len + proto)
- :"er0");
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#endif /* _H8300_CHECKSUM_H */
+++ /dev/null
-#ifndef __ARCH_H8300_CMPXCHG__
-#define __ARCH_H8300_CMPXCHG__
-
-#include <linux/irqflags.h>
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- unsigned long tmp, flags;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("mov.b %2,%0\n\t"
- "mov.b %1,%2"
- : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("mov.w %2,%0\n\t"
- "mov.w %1,%2"
- : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("mov.l %2,%0\n\t"
- "mov.l %1,%2"
- : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
- break;
- default:
- tmp = 0;
- }
- local_irq_restore(flags);
- return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-#endif /* __ARCH_H8300_CMPXCHG__ */
+++ /dev/null
-#ifndef __H8300_CPUTIME_H
-#define __H8300_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __H8300_CPUTIME_H */
+++ /dev/null
-#ifndef _H8300_CURRENT_H
-#define _H8300_CURRENT_H
-/*
- * current.h
- * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * rather than dedicate a register (as the m68k source does), we
- * just keep a global, we should probably just change it all to be
- * current and lose _current_task.
- */
-
-#include <linux/thread_info.h>
-#include <asm/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
- return(current_thread_info()->task);
-}
-
-#define current get_current()
-
-#endif /* _H8300_CURRENT_H */
+++ /dev/null
-#define DEBUG 1
-#define BREAK asm volatile ("trap #3")
+++ /dev/null
-#ifndef _H8300_DELAY_H
-#define _H8300_DELAY_H
-
-#include <asm/param.h>
-
-/*
- * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-
-static inline void __delay(unsigned long loops)
-{
- __asm__ __volatile__ ("1:\n\t"
- "dec.l #1,%0\n\t"
- "bne 1b"
- :"=r" (loops):"0"(loops));
-}
-
-/*
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void udelay(unsigned long usecs)
-{
- usecs *= 4295; /* 2**32 / 1000000 */
- usecs /= (loops_per_jiffy*HZ);
- if (usecs)
- __delay(usecs);
-}
-
-#endif /* _H8300_DELAY_H */
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-#include <asm-generic/div64.h>
+++ /dev/null
-#ifndef _H8300_DMA_H
-#define _H8300_DMA_H
-
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-#endif /* _H8300_DMA_H */
+++ /dev/null
-#ifndef __ASMH8300_ELF_H
-#define __ASMH8300_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-typedef unsigned long elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-#define ELF_ARCH EM_H8_300
-#if defined(__H8300H__)
-#define ELF_CORE_EFLAGS 0x810000
-#endif
-#if defined(__H8300S__)
-#define ELF_CORE_EFLAGS 0x820000
-#endif
-
-#define ELF_PLAT_INIT(_r) _r->er1 = 0
-
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE 0xD0000000UL
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM (NULL)
-
-#define R_H8_NONE 0
-#define R_H8_DIR32 1
-#define R_H8_DIR32_28 2
-#define R_H8_DIR32_24 3
-#define R_H8_DIR32_16 4
-#define R_H8_DIR32U 6
-#define R_H8_DIR32U_28 7
-#define R_H8_DIR32U_24 8
-#define R_H8_DIR32U_20 9
-#define R_H8_DIR32U_16 10
-#define R_H8_DIR24 11
-#define R_H8_DIR24_20 12
-#define R_H8_DIR24_16 13
-#define R_H8_DIR24U 14
-#define R_H8_DIR24U_20 15
-#define R_H8_DIR24U_16 16
-#define R_H8_DIR16 17
-#define R_H8_DIR16U 18
-#define R_H8_DIR16S_32 19
-#define R_H8_DIR16S_28 20
-#define R_H8_DIR16S_24 21
-#define R_H8_DIR16S_20 22
-#define R_H8_DIR16S 23
-#define R_H8_DIR8 24
-#define R_H8_DIR8U 25
-#define R_H8_DIR8Z_32 26
-#define R_H8_DIR8Z_28 27
-#define R_H8_DIR8Z_24 28
-#define R_H8_DIR8Z_20 29
-#define R_H8_DIR8Z_16 30
-#define R_H8_PCREL16 31
-#define R_H8_PCREL8 32
-#define R_H8_BPOS 33
-#define R_H8_PCREL32 34
-#define R_H8_GOT32O 35
-#define R_H8_GOT16O 36
-#define R_H8_DIR16A8 59
-#define R_H8_DIR16R8 60
-#define R_H8_DIR24A8 61
-#define R_H8_DIR24R8 62
-#define R_H8_DIR32A16 63
-#define R_H8_ABS32 65
-#define R_H8_ABS32A16 127
-
-#endif
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
+++ /dev/null
-/*
- * include/asm-h8300/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __H8300_FLAT_H__
-#define __H8300_FLAT_H__
-
-#define flat_argvp_envp_on_stack() 1
-#define flat_old_ram_flag(flags) 1
-#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_set_persistent(relval, p) 0
-
-/*
- * on the H8 a couple of the relocations have an instruction in the
- * top byte. As there can only be 24bits of address space, we just
- * always preserve that 8bits at the top, when it isn't an instruction
- * is is 0 (davidm@snapgear.com)
- */
-
-#define flat_get_relocate_addr(rel) (rel)
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
- (get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff))
-#define flat_put_addr_at_rp(rp, addr, rel) \
- put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp)
-
-#endif /* __H8300_FLAT_H__ */
+++ /dev/null
-/* Nothing do */
+++ /dev/null
-/* empty */
+++ /dev/null
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
+++ /dev/null
-#ifndef _H8300_GPIO_H
-#define _H8300_GPIO_H
-
-#define H8300_GPIO_P1 0
-#define H8300_GPIO_P2 1
-#define H8300_GPIO_P3 2
-#define H8300_GPIO_P4 3
-#define H8300_GPIO_P5 4
-#define H8300_GPIO_P6 5
-#define H8300_GPIO_P7 6
-#define H8300_GPIO_P8 7
-#define H8300_GPIO_P9 8
-#define H8300_GPIO_PA 9
-#define H8300_GPIO_PB 10
-#define H8300_GPIO_PC 11
-#define H8300_GPIO_PD 12
-#define H8300_GPIO_PE 13
-#define H8300_GPIO_PF 14
-#define H8300_GPIO_PG 15
-#define H8300_GPIO_PH 16
-
-#define H8300_GPIO_B7 0x80
-#define H8300_GPIO_B6 0x40
-#define H8300_GPIO_B5 0x20
-#define H8300_GPIO_B4 0x10
-#define H8300_GPIO_B3 0x08
-#define H8300_GPIO_B2 0x04
-#define H8300_GPIO_B1 0x02
-#define H8300_GPIO_B0 0x01
-
-#define H8300_GPIO_INPUT 0
-#define H8300_GPIO_OUTPUT 1
-
-#define H8300_GPIO_RESERVE(port, bits) \
- h8300_reserved_gpio(port, bits)
-
-#define H8300_GPIO_FREE(port, bits) \
- h8300_free_gpio(port, bits)
-
-#define H8300_GPIO_DDR(port, bit, dir) \
- h8300_set_gpio_dir(((port) << 8) | (bit), dir)
-
-#define H8300_GPIO_GETDIR(port, bit) \
- h8300_get_gpio_dir(((port) << 8) | (bit))
-
-extern int h8300_reserved_gpio(int port, int bits);
-extern int h8300_free_gpio(int port, int bits);
-extern int h8300_set_gpio_dir(int port_bit, int dir);
-extern int h8300_get_gpio_dir(int port_bit);
-extern int h8300_init_gpio(void);
-
-#endif
+++ /dev/null
-#ifndef __H8300_HARDIRQ_H
-#define __H8300_HARDIRQ_H
-
-#include <asm/irq.h>
-
-#define HARDIRQ_BITS 8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#include <asm-generic/hardirq.h>
-
-#endif
+++ /dev/null
-/* Do Nothing */
+++ /dev/null
-#ifndef _H8300_IO_H
-#define _H8300_IO_H
-
-#ifdef __KERNEL__
-
-#include <asm/virtconvert.h>
-
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
-#include <asm/regs306x.h>
-#elif defined(CONFIG_H8S2678)
-#include <asm/regs267x.h>
-#else
-#error UNKNOWN CPU TYPE
-#endif
-
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-
-static inline unsigned short _swapw(volatile unsigned short v)
-{
-#ifndef H8300_IO_NOSWAP
- unsigned short r;
- __asm__("xor.b %w0,%x0\n\t"
- "xor.b %x0,%w0\n\t"
- "xor.b %w0,%x0"
- :"=r"(r)
- :"0"(v));
- return r;
-#else
- return v;
-#endif
-}
-
-static inline unsigned long _swapl(volatile unsigned long v)
-{
-#ifndef H8300_IO_NOSWAP
- unsigned long r;
- __asm__("xor.b %w0,%x0\n\t"
- "xor.b %x0,%w0\n\t"
- "xor.b %w0,%x0\n\t"
- "xor.w %e0,%f0\n\t"
- "xor.w %f0,%e0\n\t"
- "xor.w %e0,%f0\n\t"
- "xor.b %w0,%x0\n\t"
- "xor.b %x0,%w0\n\t"
- "xor.b %w0,%x0"
- :"=r"(r)
- :"0"(v));
- return r;
-#else
- return v;
-#endif
-}
-
-#define readb(addr) \
- ({ unsigned char __v = \
- *(volatile unsigned char *)((unsigned long)(addr) & 0x00ffffff); \
- __v; })
-#define readw(addr) \
- ({ unsigned short __v = \
- *(volatile unsigned short *)((unsigned long)(addr) & 0x00ffffff); \
- __v; })
-#define readl(addr) \
- ({ unsigned long __v = \
- *(volatile unsigned long *)((unsigned long)(addr) & 0x00ffffff); \
- __v; })
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) \
- ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) \
- ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned long *) \
- ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline int h8300_buswidth(unsigned int addr)
-{
- return (*(volatile unsigned char *)ABWCR & (1 << ((addr >> 21) & 7))) == 0;
-}
-
-static inline void io_outsb(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned char *ap_b = (volatile unsigned char *) addr;
- volatile unsigned short *ap_w = (volatile unsigned short *) addr;
- unsigned char *bp = (unsigned char *) buf;
-
- if(h8300_buswidth(addr) && (addr & 1)) {
- while (len--)
- *ap_w = *bp++;
- } else {
- while (len--)
- *ap_b = *bp++;
- }
-}
-
-static inline void io_outsw(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *ap = _swapl(*bp++);
-}
-
-static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *ap = *bp++;
-}
-
-static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *ap = *bp++;
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
- volatile unsigned char *ap_b;
- volatile unsigned short *ap_w;
- unsigned char *bp = (unsigned char *) buf;
-
- if(h8300_buswidth(addr)) {
- ap_w = (volatile unsigned short *)(addr & ~1);
- while (len--)
- *bp++ = *ap_w & 0xff;
- } else {
- ap_b = (volatile unsigned char *)addr;
- while (len--)
- *bp++ = *ap_b;
- }
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *bp++ = _swapl(*ap);
-}
-
-static inline void io_insw_noswap(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *bp++ = *ap;
-}
-
-static inline void io_insl_noswap(unsigned int addr, void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *bp++ = *ap;
-}
-
-/*
- * make the short names macros so specific devices
- * can override them as required
- */
-
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-#define mmiowb()
-
-#define inb(addr) ((h8300_buswidth(addr))?readw((addr) & ~1) & 0xff:readb(addr))
-#define inw(addr) _swapw(readw(addr))
-#define inl(addr) _swapl(readl(addr))
-#define outb(x,addr) ((void)((h8300_buswidth(addr) && \
- ((addr) & 1))?writew(x,(addr) & ~1):writeb(x,addr)))
-#define outw(x,addr) ((void) writew(_swapw(x),addr))
-#define outl(x,addr) ((void) writel(_swapl(x),addr))
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING 0
-#define IOMAP_NOCACHE_SER 1
-#define IOMAP_NOCACHE_NONSER 2
-#define IOMAP_WRITETHROUGH 3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-/* H8/300 internal I/O functions */
-static __inline__ unsigned char ctrl_inb(unsigned long addr)
-{
- return *(volatile unsigned char*)addr;
-}
-
-static __inline__ unsigned short ctrl_inw(unsigned long addr)
-{
- return *(volatile unsigned short*)addr;
-}
-
-static __inline__ unsigned long ctrl_inl(unsigned long addr)
-{
- return *(volatile unsigned long*)addr;
-}
-
-static __inline__ void ctrl_outb(unsigned char b, unsigned long addr)
-{
- *(volatile unsigned char*)addr = b;
-}
-
-static __inline__ void ctrl_outw(unsigned short b, unsigned long addr)
-{
- *(volatile unsigned short*)addr = b;
-}
-
-static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
-{
- *(volatile unsigned long*)addr = b;
-}
-
-static __inline__ void ctrl_bclr(int b, unsigned long addr)
-{
- if (__builtin_constant_p(b))
- switch (b) {
- case 0: __asm__("bclr #0,@%0"::"r"(addr)); break;
- case 1: __asm__("bclr #1,@%0"::"r"(addr)); break;
- case 2: __asm__("bclr #2,@%0"::"r"(addr)); break;
- case 3: __asm__("bclr #3,@%0"::"r"(addr)); break;
- case 4: __asm__("bclr #4,@%0"::"r"(addr)); break;
- case 5: __asm__("bclr #5,@%0"::"r"(addr)); break;
- case 6: __asm__("bclr #6,@%0"::"r"(addr)); break;
- case 7: __asm__("bclr #7,@%0"::"r"(addr)); break;
- }
- else
- __asm__("bclr %w0,@%1"::"r"(b), "r"(addr));
-}
-
-static __inline__ void ctrl_bset(int b, unsigned long addr)
-{
- if (__builtin_constant_p(b))
- switch (b) {
- case 0: __asm__("bset #0,@%0"::"r"(addr)); break;
- case 1: __asm__("bset #1,@%0"::"r"(addr)); break;
- case 2: __asm__("bset #2,@%0"::"r"(addr)); break;
- case 3: __asm__("bset #3,@%0"::"r"(addr)); break;
- case 4: __asm__("bset #4,@%0"::"r"(addr)); break;
- case 5: __asm__("bset #5,@%0"::"r"(addr)); break;
- case 6: __asm__("bset #6,@%0"::"r"(addr)); break;
- case 7: __asm__("bset #7,@%0"::"r"(addr)); break;
- }
- else
- __asm__("bset %w0,@%1"::"r"(b), "r"(addr));
-}
-
-/* Pages to physical address... */
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* _H8300_IO_H */
+++ /dev/null
-#ifndef _H8300_IRQ_H_
-#define _H8300_IRQ_H_
-
-#include <asm/ptrace.h>
-
-#if defined(CONFIG_CPU_H8300H)
-#define NR_IRQS 64
-#define EXT_IRQ0 12
-#define EXT_IRQ1 13
-#define EXT_IRQ2 14
-#define EXT_IRQ3 15
-#define EXT_IRQ4 16
-#define EXT_IRQ5 17
-#define EXT_IRQ6 18
-#define EXT_IRQ7 19
-#define EXT_IRQS 5
-#define IER_REGS *(volatile unsigned char *)IER
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define NR_IRQS 128
-#define EXT_IRQ0 16
-#define EXT_IRQ1 17
-#define EXT_IRQ2 18
-#define EXT_IRQ3 19
-#define EXT_IRQ4 20
-#define EXT_IRQ5 21
-#define EXT_IRQ6 22
-#define EXT_IRQ7 23
-#define EXT_IRQ8 24
-#define EXT_IRQ9 25
-#define EXT_IRQ10 26
-#define EXT_IRQ11 27
-#define EXT_IRQ12 28
-#define EXT_IRQ13 29
-#define EXT_IRQ14 30
-#define EXT_IRQ15 31
-#define EXT_IRQS 15
-
-#define IER_REGS *(volatile unsigned short *)IER
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
- return irq;
-}
-
-typedef void (*h8300_vector)(void);
-
-#endif /* _H8300_IRQ_H_ */
+++ /dev/null
-#include <asm-generic/irq_regs.h>
+++ /dev/null
-#ifndef _H8300_IRQFLAGS_H
-#define _H8300_IRQFLAGS_H
-
-static inline unsigned long arch_local_save_flags(void)
-{
- unsigned long flags;
- asm volatile ("stc ccr,%w0" : "=r" (flags));
- return flags;
-}
-
-static inline void arch_local_irq_disable(void)
-{
- asm volatile ("orc #0x80,ccr" : : : "memory");
-}
-
-static inline void arch_local_irq_enable(void)
-{
- asm volatile ("andc #0x7f,ccr" : : : "memory");
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
- unsigned long flags = arch_local_save_flags();
- arch_local_irq_disable();
- return flags;
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
- asm volatile ("ldc %w0,ccr" : : "r" (flags) : "memory");
-}
-
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
-{
- return (flags & 0x80) == 0x80;
-}
-
-static inline bool arch_irqs_disabled(void)
-{
- return arch_irqs_disabled_flags(arch_local_save_flags());
-}
-
-#endif /* _H8300_IRQFLAGS_H */
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-#ifndef _ASM_H8300_KMAP_TYPES_H
-#define _ASM_H8300_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif
+++ /dev/null
-#ifndef _H8300_LOCAL_H_
-#define _H8300_LOCAL_H_
-
-#include <asm-generic/local.h>
-
-#endif
+++ /dev/null
-#include <asm-generic/local64.h>
+++ /dev/null
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _H8300_MC146818RTC_H
-#define _H8300_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _H8300_MC146818RTC_H */
+++ /dev/null
-#ifndef __H8300_MMU_CONTEXT_H
-#define __H8300_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- // mm->context = virt_to_phys(mm->pgd);
- return(0);
-}
-
-#define destroy_context(mm) do { } while(0)
-#define deactivate_mm(tsk,mm) do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-static inline void activate_mm(struct mm_struct *prev_mm,
- struct mm_struct *next_mm)
-{
-}
-
-#endif
+++ /dev/null
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
+++ /dev/null
-#ifndef _H8300_PAGE_H
-#define _H8300_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT (12)
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-#define clear_page(page) memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg) clear_page(page)
-#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
- alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((&x)->pmd[0])
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr) virt_to_phys(vaddr)
-#define __va(paddr) phys_to_virt((unsigned long)paddr)
-
-#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-
-#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-#define pfn_valid(page) (page < max_mapnr)
-
-#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
-
-#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
- ((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
-
-#endif /* _H8300_PAGE_H */
+++ /dev/null
-
-#define PAGE_OFFSET_RAW 0x00000000
-
+++ /dev/null
-#ifndef _H8300_PARAM_H
-#define _H8300_PARAM_H
-
-#include <uapi/asm/param.h>
-
-#define HZ CONFIG_HZ
-#define USER_HZ HZ
-#define CLOCKS_PER_SEC (USER_HZ)
-#endif /* _H8300_PARAM_H */
+++ /dev/null
-#ifndef _ASM_H8300_PCI_H
-#define _ASM_H8300_PCI_H
-
-/*
- * asm-h8300/pci.h - H8/300 specific PCI declarations.
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#define pcibios_assign_all_busses() 0
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
- /* We don't do dynamic PCI IRQ allocation */
-}
-
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#endif /* _ASM_H8300_PCI_H */
+++ /dev/null
-#ifndef __ARCH_H8300_PERCPU__
-#define __ARCH_H8300_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_H8300_PERCPU__ */
+++ /dev/null
-#ifndef _H8300_PGALLOC_H
-#define _H8300_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _H8300_PGALLOC_H */
+++ /dev/null
-#ifndef _H8300_PGTABLE_H
-#define _H8300_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr) (1)
-#define pmd_offset(a, b) ((void *)0)
-#define pmd_none(pmd) (1)
-#define pgd_offset_k(adrdress) ((pgd_t *)0)
-#define pte_offset_kernel(dir, address) ((pte_t *)0)
-
-#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-extern int is_in_rom(unsigned long);
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init() do { } while (0)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-#define arch_enter_lazy_cpu_mode() do {} while (0)
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _H8300_PGTABLE_H */
+++ /dev/null
-/*
- * include/asm-h8300/processor.h
- *
- * Copyright (C) 2002 Yoshinori Sato
- *
- * Based on: linux/asm-m68nommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_H8300_PROCESSOR_H
-#define __ASM_H8300_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void) {
- extern unsigned int sw_usp;
- return(sw_usp);
-}
-
-static inline void wrusp(unsigned long usp) {
- extern unsigned int sw_usp;
- sw_usp = usp;
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE (0xFFFFFFFFUL)
-
-#ifdef __KERNEL__
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-#endif
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE 0
-
-struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned long ccr; /* saved status register */
- unsigned long esp0; /* points to SR of stack frame */
- struct {
- unsigned short *addr;
- unsigned short inst;
- } breakinfo;
-};
-
-#define INIT_THREAD { \
- .ksp = sizeof(init_stack) + (unsigned long)init_stack, \
- .usp = 0, \
- .ccr = PS_S, \
- .esp0 = 0, \
- .breakinfo = { \
- .addr = (unsigned short *)-1, \
- .inst = 0 \
- } \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#if defined(__H8300H__)
-#define start_thread(_regs, _pc, _usp) \
-do { \
- (_regs)->pc = (_pc); \
- (_regs)->ccr = 0x00; /* clear all flags */ \
- (_regs)->er5 = current->mm->start_data; /* GOT base */ \
- wrusp((unsigned long)(_usp) - sizeof(unsigned long)*3); \
-} while(0)
-#endif
-#if defined(__H8300S__)
-#define start_thread(_regs, _pc, _usp) \
-do { \
- (_regs)->pc = (_pc); \
- (_regs)->ccr = 0x00; /* clear kernel flag */ \
- (_regs)->exr = 0x78; /* enable all interrupts */ \
- (_regs)->er5 = current->mm->start_data; /* GOT base */ \
- /* 14 = space for retaddr(4), vector(4), er0(4) and ext(2) on stack */ \
- wrusp(((unsigned long)(_usp)) - 14); \
-} while(0)
-#endif
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) \
- ({ \
- unsigned long eip = 0; \
- if ((tsk)->thread.esp0 > PAGE_SIZE && \
- MAP_NR((tsk)->thread.esp0) < max_mapnr) \
- eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
- eip; })
-#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax() barrier()
-
-#define HARD_RESET_NOW() ({ \
- local_irq_disable(); \
- asm("jmp @@0"); \
-})
-
-#endif
+++ /dev/null
-#ifndef _H8300_PTRACE_H
-#define _H8300_PTRACE_H
-
-#include <uapi/asm/ptrace.h>
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_CPU_H8S)
-#endif
-#ifndef PS_S
-#define PS_S (0x10)
-#endif
-
-#if defined(__H8300H__)
-#define H8300_REGS_NO 11
-#endif
-#if defined(__H8300S__)
-#define H8300_REGS_NO 12
-#endif
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
-
-#define arch_has_single_step() (1)
-
-#define user_mode(regs) (!((regs)->ccr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-#define current_pt_regs() ((struct pt_regs *) \
- (THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
-#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
-#define current_user_stack_pointer() rdusp()
-#endif /* __ASSEMBLY__ */
-#endif /* _H8300_PTRACE_H */
+++ /dev/null
-/* internal Peripherals Register address define */
-/* CPU: H8/306x */
-
-#if !defined(__REGS_H8S267x__)
-#define __REGS_H8S267x__
-
-#if defined(__KERNEL__)
-
-#define DASTCR 0xFEE01A
-#define DADR0 0xFFFFA4
-#define DADR1 0xFFFFA5
-#define DACR01 0xFFFFA6
-#define DADR2 0xFFFFA8
-#define DADR3 0xFFFFA9
-#define DACR23 0xFFFFAA
-
-#define ADDRA 0xFFFF90
-#define ADDRAH 0xFFFF90
-#define ADDRAL 0xFFFF91
-#define ADDRB 0xFFFF92
-#define ADDRBH 0xFFFF92
-#define ADDRBL 0xFFFF93
-#define ADDRC 0xFFFF94
-#define ADDRCH 0xFFFF94
-#define ADDRCL 0xFFFF95
-#define ADDRD 0xFFFF96
-#define ADDRDH 0xFFFF96
-#define ADDRDL 0xFFFF97
-#define ADDRE 0xFFFF98
-#define ADDREH 0xFFFF98
-#define ADDREL 0xFFFF99
-#define ADDRF 0xFFFF9A
-#define ADDRFH 0xFFFF9A
-#define ADDRFL 0xFFFF9B
-#define ADDRG 0xFFFF9C
-#define ADDRGH 0xFFFF9C
-#define ADDRGL 0xFFFF9D
-#define ADDRH 0xFFFF9E
-#define ADDRHH 0xFFFF9E
-#define ADDRHL 0xFFFF9F
-
-#define ADCSR 0xFFFFA0
-#define ADCR 0xFFFFA1
-
-#define ABWCR 0xFFFEC0
-#define ASTCR 0xFFFEC1
-#define WTCRAH 0xFFFEC2
-#define WTCRAL 0xFFFEC3
-#define WTCRBH 0xFFFEC4
-#define WTCRBL 0xFFFEC5
-#define RDNCR 0xFFFEC6
-#define CSACRH 0xFFFEC8
-#define CSACRL 0xFFFEC9
-#define BROMCRH 0xFFFECA
-#define BROMCRL 0xFFFECB
-#define BCR 0xFFFECC
-#define DRAMCR 0xFFFED0
-#define DRACCR 0xFFFED2
-#define REFCR 0xFFFED4
-#define RTCNT 0xFFFED6
-#define RTCOR 0xFFFED7
-
-#define MAR0AH 0xFFFEE0
-#define MAR0AL 0xFFFEE2
-#define IOAR0A 0xFFFEE4
-#define ETCR0A 0xFFFEE6
-#define MAR0BH 0xFFFEE8
-#define MAR0BL 0xFFFEEA
-#define IOAR0B 0xFFFEEC
-#define ETCR0B 0xFFFEEE
-#define MAR1AH 0xFFFEF0
-#define MAR1AL 0xFFFEF2
-#define IOAR1A 0xFFFEF4
-#define ETCR1A 0xFFFEF6
-#define MAR1BH 0xFFFEF8
-#define MAR1BL 0xFFFEFA
-#define IOAR1B 0xFFFEFC
-#define ETCR1B 0xFFFEFE
-#define DMAWER 0xFFFF20
-#define DMATCR 0xFFFF21
-#define DMACR0A 0xFFFF22
-#define DMACR0B 0xFFFF23
-#define DMACR1A 0xFFFF24
-#define DMACR1B 0xFFFF25
-#define DMABCRH 0xFFFF26
-#define DMABCRL 0xFFFF27
-
-#define EDSAR0 0xFFFDC0
-#define EDDAR0 0xFFFDC4
-#define EDTCR0 0xFFFDC8
-#define EDMDR0 0xFFFDCC
-#define EDMDR0H 0xFFFDCC
-#define EDMDR0L 0xFFFDCD
-#define EDACR0 0xFFFDCE
-#define EDSAR1 0xFFFDD0
-#define EDDAR1 0xFFFDD4
-#define EDTCR1 0xFFFDD8
-#define EDMDR1 0xFFFDDC
-#define EDMDR1H 0xFFFDDC
-#define EDMDR1L 0xFFFDDD
-#define EDACR1 0xFFFDDE
-#define EDSAR2 0xFFFDE0
-#define EDDAR2 0xFFFDE4
-#define EDTCR2 0xFFFDE8
-#define EDMDR2 0xFFFDEC
-#define EDMDR2H 0xFFFDEC
-#define EDMDR2L 0xFFFDED
-#define EDACR2 0xFFFDEE
-#define EDSAR3 0xFFFDF0
-#define EDDAR3 0xFFFDF4
-#define EDTCR3 0xFFFDF8
-#define EDMDR3 0xFFFDFC
-#define EDMDR3H 0xFFFDFC
-#define EDMDR3L 0xFFFDFD
-#define EDACR3 0xFFFDFE
-
-#define IPRA 0xFFFE00
-#define IPRB 0xFFFE02
-#define IPRC 0xFFFE04
-#define IPRD 0xFFFE06
-#define IPRE 0xFFFE08
-#define IPRF 0xFFFE0A
-#define IPRG 0xFFFE0C
-#define IPRH 0xFFFE0E
-#define IPRI 0xFFFE10
-#define IPRJ 0xFFFE12
-#define IPRK 0xFFFE14
-#define ITSR 0xFFFE16
-#define SSIER 0xFFFE18
-#define ISCRH 0xFFFE1A
-#define ISCRL 0xFFFE1C
-
-#define INTCR 0xFFFF31
-#define IER 0xFFFF32
-#define IERH 0xFFFF32
-#define IERL 0xFFFF33
-#define ISR 0xFFFF34
-#define ISRH 0xFFFF34
-#define ISRL 0xFFFF35
-
-#define P1DDR 0xFFFE20
-#define P2DDR 0xFFFE21
-#define P3DDR 0xFFFE22
-#define P4DDR 0xFFFE23
-#define P5DDR 0xFFFE24
-#define P6DDR 0xFFFE25
-#define P7DDR 0xFFFE26
-#define P8DDR 0xFFFE27
-#define P9DDR 0xFFFE28
-#define PADDR 0xFFFE29
-#define PBDDR 0xFFFE2A
-#define PCDDR 0xFFFE2B
-#define PDDDR 0xFFFE2C
-#define PEDDR 0xFFFE2D
-#define PFDDR 0xFFFE2E
-#define PGDDR 0xFFFE2F
-#define PHDDR 0xFFFF74
-
-#define PFCR0 0xFFFE32
-#define PFCR1 0xFFFE33
-#define PFCR2 0xFFFE34
-
-#define PAPCR 0xFFFE36
-#define PBPCR 0xFFFE37
-#define PCPCR 0xFFFE38
-#define PDPCR 0xFFFE39
-#define PEPCR 0xFFFE3A
-
-#define P3ODR 0xFFFE3C
-#define PAODR 0xFFFE3D
-
-#define P1DR 0xFFFF60
-#define P2DR 0xFFFF61
-#define P3DR 0xFFFF62
-#define P4DR 0xFFFF63
-#define P5DR 0xFFFF64
-#define P6DR 0xFFFF65
-#define P7DR 0xFFFF66
-#define P8DR 0xFFFF67
-#define P9DR 0xFFFF68
-#define PADR 0xFFFF69
-#define PBDR 0xFFFF6A
-#define PCDR 0xFFFF6B
-#define PDDR 0xFFFF6C
-#define PEDR 0xFFFF6D
-#define PFDR 0xFFFF6E
-#define PGDR 0xFFFF6F
-#define PHDR 0xFFFF72
-
-#define PORT1 0xFFFF50
-#define PORT2 0xFFFF51
-#define PORT3 0xFFFF52
-#define PORT4 0xFFFF53
-#define PORT5 0xFFFF54
-#define PORT6 0xFFFF55
-#define PORT7 0xFFFF56
-#define PORT8 0xFFFF57
-#define PORT9 0xFFFF58
-#define PORTA 0xFFFF59
-#define PORTB 0xFFFF5A
-#define PORTC 0xFFFF5B
-#define PORTD 0xFFFF5C
-#define PORTE 0xFFFF5D
-#define PORTF 0xFFFF5E
-#define PORTG 0xFFFF5F
-#define PORTH 0xFFFF70
-
-#define PCR 0xFFFF46
-#define PMR 0xFFFF47
-#define NDERH 0xFFFF48
-#define NDERL 0xFFFF49
-#define PODRH 0xFFFF4A
-#define PODRL 0xFFFF4B
-#define NDRH1 0xFFFF4C
-#define NDRL1 0xFFFF4D
-#define NDRH2 0xFFFF4E
-#define NDRL2 0xFFFF4F
-
-#define SMR0 0xFFFF78
-#define BRR0 0xFFFF79
-#define SCR0 0xFFFF7A
-#define TDR0 0xFFFF7B
-#define SSR0 0xFFFF7C
-#define RDR0 0xFFFF7D
-#define SCMR0 0xFFFF7E
-#define SMR1 0xFFFF80
-#define BRR1 0xFFFF81
-#define SCR1 0xFFFF82
-#define TDR1 0xFFFF83
-#define SSR1 0xFFFF84
-#define RDR1 0xFFFF85
-#define SCMR1 0xFFFF86
-#define SMR2 0xFFFF88
-#define BRR2 0xFFFF89
-#define SCR2 0xFFFF8A
-#define TDR2 0xFFFF8B
-#define SSR2 0xFFFF8C
-#define RDR2 0xFFFF8D
-#define SCMR2 0xFFFF8E
-
-#define IRCR0 0xFFFE1E
-#define SEMR 0xFFFDA8
-
-#define MDCR 0xFFFF3E
-#define SYSCR 0xFFFF3D
-#define MSTPCRH 0xFFFF40
-#define MSTPCRL 0xFFFF41
-#define FLMCR1 0xFFFFC8
-#define FLMCR2 0xFFFFC9
-#define EBR1 0xFFFFCA
-#define EBR2 0xFFFFCB
-#define CTGARC_RAMCR 0xFFFECE
-#define SBYCR 0xFFFF3A
-#define SCKCR 0xFFFF3B
-#define PLLCR 0xFFFF45
-
-#define TSTR 0xFFFFC0
-#define TSNC 0XFFFFC1
-
-#define TCR0 0xFFFFD0
-#define TMDR0 0xFFFFD1
-#define TIORH0 0xFFFFD2
-#define TIORL0 0xFFFFD3
-#define TIER0 0xFFFFD4
-#define TSR0 0xFFFFD5
-#define TCNT0 0xFFFFD6
-#define GRA0 0xFFFFD8
-#define GRB0 0xFFFFDA
-#define GRC0 0xFFFFDC
-#define GRD0 0xFFFFDE
-#define TCR1 0xFFFFE0
-#define TMDR1 0xFFFFE1
-#define TIORH1 0xFFFFE2
-#define TIORL1 0xFFFFE3
-#define TIER1 0xFFFFE4
-#define TSR1 0xFFFFE5
-#define TCNT1 0xFFFFE6
-#define GRA1 0xFFFFE8
-#define GRB1 0xFFFFEA
-#define TCR2 0xFFFFF0
-#define TMDR2 0xFFFFF1
-#define TIORH2 0xFFFFF2
-#define TIORL2 0xFFFFF3
-#define TIER2 0xFFFFF4
-#define TSR2 0xFFFFF5
-#define TCNT2 0xFFFFF6
-#define GRA2 0xFFFFF8
-#define GRB2 0xFFFFFA
-#define TCR3 0xFFFE80
-#define TMDR3 0xFFFE81
-#define TIORH3 0xFFFE82
-#define TIORL3 0xFFFE83
-#define TIER3 0xFFFE84
-#define TSR3 0xFFFE85
-#define TCNT3 0xFFFE86
-#define GRA3 0xFFFE88
-#define GRB3 0xFFFE8A
-#define GRC3 0xFFFE8C
-#define GRD3 0xFFFE8E
-#define TCR4 0xFFFE90
-#define TMDR4 0xFFFE91
-#define TIORH4 0xFFFE92
-#define TIORL4 0xFFFE93
-#define TIER4 0xFFFE94
-#define TSR4 0xFFFE95
-#define TCNT4 0xFFFE96
-#define GRA4 0xFFFE98
-#define GRB4 0xFFFE9A
-#define TCR5 0xFFFEA0
-#define TMDR5 0xFFFEA1
-#define TIORH5 0xFFFEA2
-#define TIORL5 0xFFFEA3
-#define TIER5 0xFFFEA4
-#define TSR5 0xFFFEA5
-#define TCNT5 0xFFFEA6
-#define GRA5 0xFFFEA8
-#define GRB5 0xFFFEAA
-
-#define _8TCR0 0xFFFFB0
-#define _8TCR1 0xFFFFB1
-#define _8TCSR0 0xFFFFB2
-#define _8TCSR1 0xFFFFB3
-#define _8TCORA0 0xFFFFB4
-#define _8TCORA1 0xFFFFB5
-#define _8TCORB0 0xFFFFB6
-#define _8TCORB1 0xFFFFB7
-#define _8TCNT0 0xFFFFB8
-#define _8TCNT1 0xFFFFB9
-
-#define TCSR 0xFFFFBC
-#define TCNT 0xFFFFBD
-#define RSTCSRW 0xFFFFBE
-#define RSTCSRR 0xFFFFBF
-
-#endif /* __KERNEL__ */
-#endif /* __REGS_H8S267x__ */
+++ /dev/null
-/* internal Peripherals Register address define */
-/* CPU: H8/306x */
-
-#if !defined(__REGS_H8306x__)
-#define __REGS_H8306x__
-
-#if defined(__KERNEL__)
-
-#define DASTCR 0xFEE01A
-#define DADR0 0xFEE09C
-#define DADR1 0xFEE09D
-#define DACR 0xFEE09E
-
-#define ADDRAH 0xFFFFE0
-#define ADDRAL 0xFFFFE1
-#define ADDRBH 0xFFFFE2
-#define ADDRBL 0xFFFFE3
-#define ADDRCH 0xFFFFE4
-#define ADDRCL 0xFFFFE5
-#define ADDRDH 0xFFFFE6
-#define ADDRDL 0xFFFFE7
-#define ADCSR 0xFFFFE8
-#define ADCR 0xFFFFE9
-
-#define BRCR 0xFEE013
-#define ADRCR 0xFEE01E
-#define CSCR 0xFEE01F
-#define ABWCR 0xFEE020
-#define ASTCR 0xFEE021
-#define WCRH 0xFEE022
-#define WCRL 0xFEE023
-#define BCR 0xFEE024
-#define DRCRA 0xFEE026
-#define DRCRB 0xFEE027
-#define RTMCSR 0xFEE028
-#define RTCNT 0xFEE029
-#define RTCOR 0xFEE02A
-
-#define MAR0AR 0xFFFF20
-#define MAR0AE 0xFFFF21
-#define MAR0AH 0xFFFF22
-#define MAR0AL 0xFFFF23
-#define ETCR0AL 0xFFFF24
-#define ETCR0AH 0xFFFF25
-#define IOAR0A 0xFFFF26
-#define DTCR0A 0xFFFF27
-#define MAR0BR 0xFFFF28
-#define MAR0BE 0xFFFF29
-#define MAR0BH 0xFFFF2A
-#define MAR0BL 0xFFFF2B
-#define ETCR0BL 0xFFFF2C
-#define ETCR0BH 0xFFFF2D
-#define IOAR0B 0xFFFF2E
-#define DTCR0B 0xFFFF2F
-#define MAR1AR 0xFFFF30
-#define MAR1AE 0xFFFF31
-#define MAR1AH 0xFFFF32
-#define MAR1AL 0xFFFF33
-#define ETCR1AL 0xFFFF34
-#define ETCR1AH 0xFFFF35
-#define IOAR1A 0xFFFF36
-#define DTCR1A 0xFFFF37
-#define MAR1BR 0xFFFF38
-#define MAR1BE 0xFFFF39
-#define MAR1BH 0xFFFF3A
-#define MAR1BL 0xFFFF3B
-#define ETCR1BL 0xFFFF3C
-#define ETCR1BH 0xFFFF3D
-#define IOAR1B 0xFFFF3E
-#define DTCR1B 0xFFFF3F
-
-#define ISCR 0xFEE014
-#define IER 0xFEE015
-#define ISR 0xFEE016
-#define IPRA 0xFEE018
-#define IPRB 0xFEE019
-
-#define P1DDR 0xFEE000
-#define P2DDR 0xFEE001
-#define P3DDR 0xFEE002
-#define P4DDR 0xFEE003
-#define P5DDR 0xFEE004
-#define P6DDR 0xFEE005
-/*#define P7DDR 0xFEE006*/
-#define P8DDR 0xFEE007
-#define P9DDR 0xFEE008
-#define PADDR 0xFEE009
-#define PBDDR 0xFEE00A
-
-#define P1DR 0xFFFFD0
-#define P2DR 0xFFFFD1
-#define P3DR 0xFFFFD2
-#define P4DR 0xFFFFD3
-#define P5DR 0xFFFFD4
-#define P6DR 0xFFFFD5
-/*#define P7DR 0xFFFFD6*/
-#define P8DR 0xFFFFD7
-#define P9DR 0xFFFFD8
-#define PADR 0xFFFFD9
-#define PBDR 0xFFFFDA
-
-#define P2CR 0xFEE03C
-#define P4CR 0xFEE03E
-#define P5CR 0xFEE03F
-
-#define SMR0 0xFFFFB0
-#define BRR0 0xFFFFB1
-#define SCR0 0xFFFFB2
-#define TDR0 0xFFFFB3
-#define SSR0 0xFFFFB4
-#define RDR0 0xFFFFB5
-#define SCMR0 0xFFFFB6
-#define SMR1 0xFFFFB8
-#define BRR1 0xFFFFB9
-#define SCR1 0xFFFFBA
-#define TDR1 0xFFFFBB
-#define SSR1 0xFFFFBC
-#define RDR1 0xFFFFBD
-#define SCMR1 0xFFFFBE
-#define SMR2 0xFFFFC0
-#define BRR2 0xFFFFC1
-#define SCR2 0xFFFFC2
-#define TDR2 0xFFFFC3
-#define SSR2 0xFFFFC4
-#define RDR2 0xFFFFC5
-#define SCMR2 0xFFFFC6
-
-#define MDCR 0xFEE011
-#define SYSCR 0xFEE012
-#define DIVCR 0xFEE01B
-#define MSTCRH 0xFEE01C
-#define MSTCRL 0xFEE01D
-#define FLMCR1 0xFEE030
-#define FLMCR2 0xFEE031
-#define EBR1 0xFEE032
-#define EBR2 0xFEE033
-#define RAMCR 0xFEE077
-
-#define TSTR 0xFFFF60
-#define TSNC 0XFFFF61
-#define TMDR 0xFFFF62
-#define TOLR 0xFFFF63
-#define TISRA 0xFFFF64
-#define TISRB 0xFFFF65
-#define TISRC 0xFFFF66
-#define TCR0 0xFFFF68
-#define TIOR0 0xFFFF69
-#define TCNT0H 0xFFFF6A
-#define TCNT0L 0xFFFF6B
-#define GRA0H 0xFFFF6C
-#define GRA0L 0xFFFF6D
-#define GRB0H 0xFFFF6E
-#define GRB0L 0xFFFF6F
-#define TCR1 0xFFFF70
-#define TIOR1 0xFFFF71
-#define TCNT1H 0xFFFF72
-#define TCNT1L 0xFFFF73
-#define GRA1H 0xFFFF74
-#define GRA1L 0xFFFF75
-#define GRB1H 0xFFFF76
-#define GRB1L 0xFFFF77
-#define TCR3 0xFFFF78
-#define TIOR3 0xFFFF79
-#define TCNT3H 0xFFFF7A
-#define TCNT3L 0xFFFF7B
-#define GRA3H 0xFFFF7C
-#define GRA3L 0xFFFF7D
-#define GRB3H 0xFFFF7E
-#define GRB3L 0xFFFF7F
-
-#define _8TCR0 0xFFFF80
-#define _8TCR1 0xFFFF81
-#define _8TCSR0 0xFFFF82
-#define _8TCSR1 0xFFFF83
-#define TCORA0 0xFFFF84
-#define TCORA1 0xFFFF85
-#define TCORB0 0xFFFF86
-#define TCORB1 0xFFFF87
-#define _8TCNT0 0xFFFF88
-#define _8TCNT1 0xFFFF89
-
-#define _8TCR2 0xFFFF90
-#define _8TCR3 0xFFFF91
-#define _8TCSR2 0xFFFF92
-#define _8TCSR3 0xFFFF93
-#define TCORA2 0xFFFF94
-#define TCORA3 0xFFFF95
-#define TCORB2 0xFFFF96
-#define TCORB3 0xFFFF97
-#define _8TCNT2 0xFFFF98
-#define _8TCNT3 0xFFFF99
-
-#define TCSR 0xFFFF8C
-#define TCNT 0xFFFF8D
-#define RSTCSR 0xFFFF8F
-
-#define TPMR 0xFFFFA0
-#define TPCR 0xFFFFA1
-#define NDERB 0xFFFFA2
-#define NDERA 0xFFFFA3
-#define NDRB1 0xFFFFA4
-#define NDRA1 0xFFFFA5
-#define NDRB2 0xFFFFA6
-#define NDRA2 0xFFFFA7
-
-#define TCSR 0xFFFF8C
-#define TCNT 0xFFFF8D
-#define RSTCSRW 0xFFFF8E
-#define RSTCSRR 0xFFFF8F
-
-#endif /* __KERNEL__ */
-#endif /* __REGS_H8306x__ */
+++ /dev/null
-#ifndef _H8300_SCATTERLIST_H
-#define _H8300_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* !(_H8300_SCATTERLIST_H) */
+++ /dev/null
-#ifndef _H8300_SECTIONS_H_
-#define _H8300_SECTIONS_H_
-
-#include <asm-generic/sections.h>
-
-#endif
+++ /dev/null
-#ifndef _H8300_SEGMENT_H
-#define _H8300_SEGMENT_H
-
-/* define constants */
-#define USER_DATA (1)
-#ifndef __USER_DS
-#define __USER_DS (USER_DATA)
-#endif
-#define USER_PROGRAM (2)
-#define SUPER_DATA (3)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (4)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define USER_DS MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
- return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
- /* return the supervisor data space code */
- return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _H8300_SEGMENT_H */
+++ /dev/null
-/* eCos HAL interface header */
-
-#ifndef SH_BIOS_H
-#define SH_BIOS_H
-
-#define HAL_IF_VECTOR_TABLE 0xfffe20
-#define CALL_IF_SET_CONSOLE_COMM 13
-#define QUERY_CURRENT -1
-#define MANGLER -3
-
-/* Checking for GDB stub active */
-/* suggestion Jonathan Larmour */
-static int sh_bios_in_gdb_mode(void)
-{
- static int gdb_active = -1;
- if (gdb_active == -1) {
- int (*set_console_comm)(int);
- set_console_comm = ((void **)HAL_IF_VECTOR_TABLE)[CALL_IF_SET_CONSOLE_COMM];
- gdb_active = (set_console_comm(QUERY_CURRENT) == MANGLER);
- }
- return gdb_active;
-}
-
-static void sh_bios_gdb_detach(void)
-{
-
-}
-
-#endif
+++ /dev/null
-#ifndef _H8300_SHM_H
-#define _H8300_SHM_H
-
-
-/* format of page table entries that correspond to shared memory pages
- currently out in swap space (see also mm/swap.c):
- bits 0-1 (PAGE_PRESENT) is = 0
- bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
- bits 31..9 are used like this:
- bits 15..9 (SHM_ID) the id of the shared memory segment
- bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
- (actually only bits 25..16 get used since SHMMAX is so low)
- bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
-*/
-/* on the m68k both bits 0 and 1 must be zero */
-/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
- others are reduced by 2. --m */
-
-#ifndef CONFIG_SUN3
-#define SHM_ID_SHIFT 9
-#else
-#define SHM_ID_SHIFT 7
-#endif
-#define _SHM_ID_BITS 7
-#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1)
-
-#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS)
-#define _SHM_IDX_BITS 15
-#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1)
-
-#endif /* _H8300_SHM_H */
+++ /dev/null
-#ifndef _H8300_SHMPARAM_H
-#define _H8300_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _H8300_SHMPARAM_H */
+++ /dev/null
-#ifndef _H8300_SIGNAL_H
-#define _H8300_SIGNAL_H
-
-#include <uapi/asm/signal.h>
-
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define __ARCH_HAS_SA_RESTORER
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* _H8300_SIGNAL_H */
+++ /dev/null
-/* nothing required here yet */
+++ /dev/null
-#ifndef __H8300_SPINLOCK_H
-#define __H8300_SPINLOCK_H
-
-#error "H8/300 doesn't do SMP yet"
-
-#endif
+++ /dev/null
-#ifndef _H8300_STRING_H_
-#define _H8300_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void * s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *d, const void *s, size_t count);
-
-#else /* KERNEL */
-
-/*
- * let user libraries deal with these,
- * IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-
-#endif /* _M68K_STRING_H_ */
+++ /dev/null
-#ifndef _H8300_SWITCH_TO_H
-#define _H8300_SWITCH_TO_H
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- *
- * H8/300 Porting 2002/09/04 Yoshinori Sato
- */
-
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) { \
- void *_last; \
- __asm__ __volatile__( \
- "mov.l %1, er0\n\t" \
- "mov.l %2, er1\n\t" \
- "mov.l %3, er2\n\t" \
- "jsr @_resume\n\t" \
- "mov.l er2,%0\n\t" \
- : "=r" (_last) \
- : "r" (&(prev->thread)), \
- "r" (&(next->thread)), \
- "g" (prev) \
- : "cc", "er0", "er1", "er2", "er3"); \
- (last) = _last; \
-}
-
-#endif /* _H8300_SWITCH_TO_H */
+++ /dev/null
-extern int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *));
-extern void platform_timer_eoi(void);
-extern void platform_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
- unsigned int *hour, unsigned int *min, unsigned int *sec);
+++ /dev/null
-#ifndef _H8300_TERMIOS_H
-#define _H8300_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- unsigned short tmp; \
- get_user(tmp, &(termio)->c_iflag); \
- (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
- get_user(tmp, &(termio)->c_oflag); \
- (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
- get_user(tmp, &(termio)->c_cflag); \
- (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
- get_user(tmp, &(termio)->c_lflag); \
- (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
- get_user((termios)->c_line, &(termio)->c_line); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* _H8300_TERMIOS_H */
+++ /dev/null
-/* thread_info.h: h8300 low-level thread information
- * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- int cpu; /* cpu we're on */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = INIT_PREEMPT_COUNT, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE_ORDER 1
-#define THREAD_SIZE 8192 /* 2 pages */
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
- __asm__(
- "mov.l sp, %0 \n\t"
- "and.l %1, %0"
- : "=&r"(ti)
- : "i" (~(THREAD_SIZE-1))
- );
- return ti;
-}
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK 0
-#define TI_EXECDOMAIN 4
-#define TI_FLAGS 8
-#define TI_CPU 12
-#define TI_PRE_COUNT 16
-
-#define PREEMPT_ACTIVE 0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
-#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-
-#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
- _TIF_NOTIFY_RESUME)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
+++ /dev/null
-#ifndef __H8300_TIMER_H
-#define __H8300_TIMER_H
-
-void h8300_timer_tick(void);
-void h8300_timer_setup(void);
-void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
- unsigned int *hour, unsigned int *min, unsigned int *sec);
-
-#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */
-
-#define calc_param(cnt, div, rate, limit) \
-do { \
- cnt = TIMER_FREQ / HZ; \
- for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \
- if (rate[div] == 0) \
- continue; \
- if ((cnt / rate[div]) > limit) \
- break; \
- } \
- if (div == ARRAY_SIZE(divide_rate)) \
- panic("Timer counter overflow"); \
- cnt /= divide_rate[div]; \
-} while(0)
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-h8300/timex.h
- *
- * H8/300 architecture timex specifications
- */
-#ifndef _ASM_H8300_TIMEX_H
-#define _ASM_H8300_TIMEX_H
-
-#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */
-
-typedef unsigned long cycles_t;
-extern short h8300_timer_count;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-#endif
+++ /dev/null
-#ifndef __H8300_TLB_H__
-#define __H8300_TLB_H__
-
-#define tlb_flush(tlb) do { } while(0)
-
-#include <asm-generic/tlb.h>
-
-#endif
+++ /dev/null
-#ifndef _H8300_TLBFLUSH_H
-#define _H8300_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
- BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
- BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
- BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
- BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
- BUG();
-}
-
-#endif /* _H8300_TLBFLUSH_H */
+++ /dev/null
-#ifndef _ASM_H8300_TOPOLOGY_H
-#define _ASM_H8300_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_H8300_TOPOLOGY_H */
+++ /dev/null
-/*
- * linux/include/asm-h8300/traps.h
- *
- * Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _H8300_TRAPS_H
-#define _H8300_TRAPS_H
-
-extern void system_call(void);
-extern void interrupt_entry(void);
-extern void trace_break(void);
-
-#define JMP_OP 0x5a000000
-#define JSR_OP 0x5e000000
-#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
-#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
-
-#define TRACE_VEC 5
-
-#define TRAP0_VEC 8
-#define TRAP1_VEC 9
-#define TRAP2_VEC 10
-#define TRAP3_VEC 11
-
-#if defined(__H8300H__)
-#define NR_TRAPS 12
-#endif
-#if defined(__H8300S__)
-#define NR_TRAPS 16
-#endif
-
-#endif /* _H8300_TRAPS_H */
+++ /dev/null
-#ifndef _H8300_TYPES_H
-#define _H8300_TYPES_H
-
-#include <uapi/asm/types.h>
-
-
-#define BITS_PER_LONG 32
-
-#endif /* _H8300_TYPES_H */
+++ /dev/null
-#ifndef __H8300_UACCESS_H
-#define __H8300_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/* We let the MMU do all checking */
-#define access_ok(type, addr, size) __access_ok((unsigned long)addr,size)
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-#define RANGE_CHECK_OK(addr, size, lower, upper) \
- (((addr) >= (lower)) && (((addr) + (size)) < (upper)))
-
- extern unsigned long _ramend;
- return(RANGE_CHECK_OK(addr, size, 0L, (unsigned long)&_ramend));
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr) \
-({ \
- int __pu_err = 0; \
- typeof(*(ptr)) __pu_val = (x); \
- switch (sizeof (*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- *(ptr) = (__pu_val); \
- break; \
- case 8: \
- memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define get_user(x, ptr) \
-({ \
- int __gu_err = 0; \
- typeof(*(ptr)) __gu_val = *ptr; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- case 8: \
- break; \
- default: \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- (x) = __gu_val; \
- __gu_err; \
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
- char *tmp;
- strncpy(dst, src, count);
- for (tmp = dst; *tmp && count > 0; tmp++, count--)
- ;
- return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
- return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-clear_user(void *to, unsigned long n)
-{
- memset(to, 0, n);
- return 0;
-}
-
-#define __clear_user clear_user
-
-#endif /* _H8300_UACCESS_H */
+++ /dev/null
-#ifndef _H8300_UCONTEXT_H
-#define _H8300_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif
+++ /dev/null
-#ifndef _ASM_H8300_UNALIGNED_H
-#define _ASM_H8300_UNALIGNED_H
-
-#include <linux/unaligned/be_memmove.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif /* _ASM_H8300_UNALIGNED_H */
+++ /dev/null
-#ifndef _ASM_H8300_UNISTD_H_
-#define _ASM_H8300_UNISTD_H_
-
-#include <uapi/asm/unistd.h>
-
-
-#define NR_syscalls 321
-
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_IPC
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLD_MMAP
-#define __ARCH_WANT_SYS_OLD_SELECT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_FORK
-#define __ARCH_WANT_SYS_VFORK
-#define __ARCH_WANT_SYS_CLONE
-
-#endif /* _ASM_H8300_UNISTD_H_ */
+++ /dev/null
-#ifndef _H8300_USER_H
-#define _H8300_USER_H
-
-#include <asm/page.h>
-
-/* Core file format: The core file is written in such a way that gdb
- can understand it and provide useful information to the user (under
- linux we use the 'trad-core' bfd). There are quite a number of
- obstacles to being able to view the contents of the floating point
- registers, and until these are solved you will not be able to view the
- contents of them. Actually, you can read in the core file and look at
- the contents of the user struct to find out what the floating point
- registers contain.
- The actual file contents are as follows:
- UPAGE: 1 page consisting of a user struct that tells gdb what is present
- in the file. Directly after this is a copy of the task_struct, which
- is currently not used by gdb, but it may come in useful at some point.
- All of the registers are stored as part of the upage. The upage should
- always be only one page.
- DATA: The data area is stored. We use current->end_text to
- current->brk to pick up all of the user variables, plus any memory
- that may have been malloced. No attempt is made to determine if a page
- is demand-zero or if a page is totally unused, we just cover the entire
- range. All of the addresses are rounded in such a way that an integral
- number of pages is written.
- STACK: We need the stack information in order to get a meaningful
- backtrace. We need to write the data from (esp) to
- current->start_stack, so we round each of these off in order to be able
- to write an integer number of pages.
- The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
- is still the layout used by user (the new pt_regs doesn't have
- all registers). */
-struct user_regs_struct {
- long er1,er2,er3,er4,er5,er6;
- long er0;
- long usp;
- long orig_er0;
- short ccr;
- long pc;
-};
-
-
-/* When the kernel dumps core, it starts by dumping the user struct -
- this will be used by gdb to figure out where the data and stack segments
- are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
- from the ptrace(3,...) function. */
- struct user_regs_struct regs; /* Where the registers are actually stored */
-/* ptrace does not yet supply these. Someday.... */
-/* The rest of this junk is to help gdb figure out what goes where */
- unsigned long int u_tsize; /* Text segment size (pages). */
- unsigned long int u_dsize; /* Data segment size (pages). */
- unsigned long int u_ssize; /* Stack segment size (pages). */
- unsigned long start_code; /* Starting virtual address of text. */
- unsigned long start_stack; /* Starting virtual address of stack area.
- This is actually the bottom of the stack,
- the top of the stack is always found in the
- esp register. */
- long int signal; /* Signal that caused the core dump. */
- int reserved; /* No longer used */
- unsigned long u_ar0; /* Used by gdb to help find the values for */
- /* the registers. */
- unsigned long magic; /* To uniquely identify a core file */
- char u_comm[32]; /* User command that was responsible */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif
+++ /dev/null
-#ifndef __H8300_VIRT_CONVERT__
-#define __H8300_VIRT_CONVERT__
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-
-#ifdef __KERNEL__
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-#endif
-#endif
+++ /dev/null
-# UAPI Header export list
-include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+++ /dev/null
-#ifndef __ASMH8300_AUXVEC_H
-#define __ASMH8300_AUXVEC_H
-
-#endif
+++ /dev/null
-#include <asm-generic/bitsperlong.h>
+++ /dev/null
-#ifndef _H8300_BYTEORDER_H
-#define _H8300_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _H8300_BYTEORDER_H */
+++ /dev/null
-#ifndef _H8300_ERRNO_H
-#define _H8300_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _H8300_ERRNO_H */
+++ /dev/null
-#ifndef _H8300_FCNTL_H
-#define _H8300_FCNTL_H
-
-#define O_DIRECTORY 040000 /* must be a directory */
-#define O_NOFOLLOW 0100000 /* don't follow links */
-#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
-#define O_LARGEFILE 0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _H8300_FCNTL_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#ifndef __ARCH_H8300_IOCTLS_H__
-#define __ARCH_H8300_IOCTLS_H__
-
-#define FIOQSIZE 0x545E
-
-#include <asm-generic/ioctls.h>
-
-#endif /* __ARCH_H8300_IOCTLS_H__ */
+++ /dev/null
-#include <asm-generic/ipcbuf.h>
+++ /dev/null
-#include <asm-generic/kvm_para.h>
+++ /dev/null
-#include <asm-generic/mman.h>
+++ /dev/null
-#ifndef _H8300_MSGBUF_H
-#define _H8300_MSGBUF_H
-
-/*
- * The msqid64_ds structure for H8/300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _H8300_MSGBUF_H */
+++ /dev/null
-#ifndef _UAPI_H8300_PARAM_H
-#define _UAPI_H8300_PARAM_H
-
-#ifndef __KERNEL__
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _UAPI_H8300_PARAM_H */
+++ /dev/null
-#ifndef __H8300_POLL_H
-#define __H8300_POLL_H
-
-#define POLLWRNORM POLLOUT
-#define POLLWRBAND 256
-
-#include <asm-generic/poll.h>
-
-#undef POLLREMOVE
-
-#endif
+++ /dev/null
-#ifndef __ARCH_H8300_POSIX_TYPES_H
-#define __ARCH_H8300_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-#define __kernel_uid_t __kernel_uid_t
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-
-#include <asm-generic/posix_types.h>
-
-#endif
+++ /dev/null
-#ifndef _UAPI_H8300_PTRACE_H
-#define _UAPI_H8300_PTRACE_H
-
-#ifndef __ASSEMBLY__
-
-#define PT_ER1 0
-#define PT_ER2 1
-#define PT_ER3 2
-#define PT_ER4 3
-#define PT_ER5 4
-#define PT_ER6 5
-#define PT_ER0 6
-#define PT_ORIG_ER0 7
-#define PT_CCR 8
-#define PT_PC 9
-#define PT_USP 10
-#define PT_EXR 12
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long retpc;
- long er4;
- long er5;
- long er6;
- long er3;
- long er2;
- long er1;
- long orig_er0;
- unsigned short ccr;
- long er0;
- long vector;
-#if defined(CONFIG_CPU_H8S)
- unsigned short exr;
-#endif
- unsigned long pc;
-} __attribute__((aligned(2),packed));
-
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-
-#endif /* __ASSEMBLY__ */
-#endif /* _UAPI_H8300_PTRACE_H */
+++ /dev/null
-#ifndef _H8300_RESOURCE_H
-#define _H8300_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _H8300_RESOURCE_H */
+++ /dev/null
-#ifndef _H8300_SEMBUF_H
-#define _H8300_SEMBUF_H
-
-/*
- * The semid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _H8300_SEMBUF_H */
+++ /dev/null
-#ifndef __H8300_SETUP_H
-#define __H8300_SETUP_H
-
-#define COMMAND_LINE_SIZE 512
-
-#endif
+++ /dev/null
-#ifndef _H8300_SHMBUF_H
-#define _H8300_SHMBUF_H
-
-/*
- * The shmid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _H8300_SHMBUF_H */
+++ /dev/null
-#ifndef _ASM_H8300_SIGCONTEXT_H
-#define _ASM_H8300_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long sc_mask; /* old sigmask */
- unsigned long sc_usp; /* old user stack pointer */
- unsigned long sc_er0;
- unsigned long sc_er1;
- unsigned long sc_er2;
- unsigned long sc_er3;
- unsigned long sc_er4;
- unsigned long sc_er5;
- unsigned long sc_er6;
- unsigned short sc_ccr;
- unsigned long sc_pc;
-};
-
-#endif
+++ /dev/null
-#ifndef _H8300_SIGINFO_H
-#define _H8300_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
+++ /dev/null
-#ifndef _UAPI_H8300_SIGNAL_H
-#define _UAPI_H8300_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifndef __KERNEL__
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifndef __KERNEL__
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-
-#endif /* _UAPI_H8300_SIGNAL_H */
+++ /dev/null
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-#define SO_REUSEPORT 15
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-#define SO_GET_FILTER SO_ATTACH_FILTER
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#define SO_PROTOCOL 38
-#define SO_DOMAIN 39
-
-#define SO_RXQ_OVFL 40
-
-#define SO_WIFI_STATUS 41
-#define SCM_WIFI_STATUS SO_WIFI_STATUS
-#define SO_PEEK_OFF 42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS 43
-
-#define SO_LOCK_FILTER 44
-
-#define SO_SELECT_ERR_QUEUE 45
-
-#define SO_BUSY_POLL 46
-
-#endif /* _ASM_SOCKET_H */
+++ /dev/null
-#ifndef __ARCH_H8300_SOCKIOS__
-#define __ARCH_H8300_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* __ARCH_H8300_SOCKIOS__ */
+++ /dev/null
-#ifndef _H8300_STAT_H
-#define _H8300_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long __unused1;
- unsigned long st_mtime;
- unsigned long __unused2;
- unsigned long st_ctime;
- unsigned long __unused3;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad1[2];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[2];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long __pad4; /* future possible st_blocks high bits */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#endif /* _H8300_STAT_H */
+++ /dev/null
-#ifndef _H8300_STATFS_H
-#define _H8300_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _H8300_STATFS_H */
+++ /dev/null
-#ifndef _H8300_SWAB_H
-#define _H8300_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _H8300_SWAB_H */
+++ /dev/null
-#ifndef __ARCH_H8300_TERMBITS_H__
-#define __ARCH_H8300_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-#define EXTPROC 0200000
-
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* __ARCH_H8300_TERMBITS_H__ */
+++ /dev/null
-#ifndef _UAPI_H8300_TERMIOS_H
-#define _UAPI_H8300_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-
-#endif /* _UAPI_H8300_TERMIOS_H */
+++ /dev/null
-#include <asm-generic/int-ll64.h>
+++ /dev/null
-#ifndef _UAPI_ASM_H8300_UNISTD_H_
-#define _UAPI_ASM_H8300_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_lchown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl 110
-#define __NR_vhangup 111
-#define __NR_idle 112
-#define __NR_vm86old 113
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_modify_ldt 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_vm86 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_chown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_lchown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_chown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_mincore 218
-#define __NR_madvise 219
-#define __NR_madvise1 219
-#define __NR_getdents64 220
-#define __NR_fcntl64 221
-/* 223 is unused */
-#define __NR_gettid 224
-#define __NR_readahead 225
-#define __NR_setxattr 226
-#define __NR_lsetxattr 227
-#define __NR_fsetxattr 228
-#define __NR_getxattr 229
-#define __NR_lgetxattr 230
-#define __NR_fgetxattr 231
-#define __NR_listxattr 232
-#define __NR_llistxattr 233
-#define __NR_flistxattr 234
-#define __NR_removexattr 235
-#define __NR_lremovexattr 236
-#define __NR_fremovexattr 237
-#define __NR_tkill 238
-#define __NR_sendfile64 239
-#define __NR_futex 240
-#define __NR_sched_setaffinity 241
-#define __NR_sched_getaffinity 242
-#define __NR_set_thread_area 243
-#define __NR_get_thread_area 244
-#define __NR_io_setup 245
-#define __NR_io_destroy 246
-#define __NR_io_getevents 247
-#define __NR_io_submit 248
-#define __NR_io_cancel 249
-#define __NR_fadvise64 250
-/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
-#define __NR_exit_group 252
-#define __NR_lookup_dcookie 253
-#define __NR_epoll_create 254
-#define __NR_epoll_ctl 255
-#define __NR_epoll_wait 256
-#define __NR_remap_file_pages 257
-#define __NR_set_tid_address 258
-#define __NR_timer_create 259
-#define __NR_timer_settime (__NR_timer_create+1)
-#define __NR_timer_gettime (__NR_timer_create+2)
-#define __NR_timer_getoverrun (__NR_timer_create+3)
-#define __NR_timer_delete (__NR_timer_create+4)
-#define __NR_clock_settime (__NR_timer_create+5)
-#define __NR_clock_gettime (__NR_timer_create+6)
-#define __NR_clock_getres (__NR_timer_create+7)
-#define __NR_clock_nanosleep (__NR_timer_create+8)
-#define __NR_statfs64 268
-#define __NR_fstatfs64 269
-#define __NR_tgkill 270
-#define __NR_utimes 271
-#define __NR_fadvise64_64 272
-#define __NR_vserver 273
-#define __NR_mbind 274
-#define __NR_get_mempolicy 275
-#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
-#define __NR_mq_unlink (__NR_mq_open+1)
-#define __NR_mq_timedsend (__NR_mq_open+2)
-#define __NR_mq_timedreceive (__NR_mq_open+3)
-#define __NR_mq_notify (__NR_mq_open+4)
-#define __NR_mq_getsetattr (__NR_mq_open+5)
-#define __NR_kexec_load 283
-#define __NR_waitid 284
-/* #define __NR_sys_setaltroot 285 */
-#define __NR_add_key 286
-#define __NR_request_key 287
-#define __NR_keyctl 288
-#define __NR_ioprio_set 289
-#define __NR_ioprio_get 290
-#define __NR_inotify_init 291
-#define __NR_inotify_add_watch 292
-#define __NR_inotify_rm_watch 293
-#define __NR_migrate_pages 294
-#define __NR_openat 295
-#define __NR_mkdirat 296
-#define __NR_mknodat 297
-#define __NR_fchownat 298
-#define __NR_futimesat 299
-#define __NR_fstatat64 300
-#define __NR_unlinkat 301
-#define __NR_renameat 302
-#define __NR_linkat 303
-#define __NR_symlinkat 304
-#define __NR_readlinkat 305
-#define __NR_fchmodat 306
-#define __NR_faccessat 307
-#define __NR_pselect6 308
-#define __NR_ppoll 309
-#define __NR_unshare 310
-#define __NR_set_robust_list 311
-#define __NR_get_robust_list 312
-#define __NR_splice 313
-#define __NR_sync_file_range 314
-#define __NR_tee 315
-#define __NR_vmsplice 316
-#define __NR_move_pages 317
-#define __NR_getcpu 318
-#define __NR_epoll_pwait 319
-#define __NR_setns 320
-
-#endif /* _UAPI_ASM_H8300_UNISTD_H_ */
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := vmlinux.lds
-
-obj-y := process.o traps.o ptrace.o irq.o \
- sys_h8300.o time.o signal.o \
- setup.o gpio.o syscalls.o \
- entry.o timer/
-
-obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o
+++ /dev/null
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/ptrace.h>
-
-int main(void)
-{
- /* offsets into the task struct */
- DEFINE(TASK_STATE, offsetof(struct task_struct, state));
- DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
- DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
- DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
- DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
- DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
- DEFINE(TASK_MM, offsetof(struct task_struct, mm));
- DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
-
- /* offsets into the irq_cpustat_t struct */
- DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
-
- /* offsets into the thread struct */
- DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
- DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
- DEFINE(THREAD_CCR, offsetof(struct thread_struct, ccr));
-
- /* offsets into the pt_regs struct */
- DEFINE(LER0, offsetof(struct pt_regs, er0) - sizeof(long));
- DEFINE(LER1, offsetof(struct pt_regs, er1) - sizeof(long));
- DEFINE(LER2, offsetof(struct pt_regs, er2) - sizeof(long));
- DEFINE(LER3, offsetof(struct pt_regs, er3) - sizeof(long));
- DEFINE(LER4, offsetof(struct pt_regs, er4) - sizeof(long));
- DEFINE(LER5, offsetof(struct pt_regs, er5) - sizeof(long));
- DEFINE(LER6, offsetof(struct pt_regs, er6) - sizeof(long));
- DEFINE(LORIG, offsetof(struct pt_regs, orig_er0) - sizeof(long));
- DEFINE(LCCR, offsetof(struct pt_regs, ccr) - sizeof(long));
- DEFINE(LVEC, offsetof(struct pt_regs, vector) - sizeof(long));
-#if defined(__H8300S__)
- DEFINE(LEXR, offsetof(struct pt_regs, exr) - sizeof(long));
-#endif
- DEFINE(LRET, offsetof(struct pt_regs, pc) - sizeof(long));
-
- DEFINE(PT_PTRACED, PT_PTRACED);
-
- return 0;
-}
+++ /dev/null
-/* -*- mode: asm -*-
- *
- * linux/arch/h8300/platform/h8300h/entry.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- * David McCullough <davidm@snapgear.com>
- *
- */
-
-/*
- * entry.S
- * include exception/interrupt gateway
- * system call entry
- */
-
-#include <linux/sys.h>
-#include <asm/unistd.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/errno.h>
-
-#if defined(CONFIG_CPU_H8300H)
-#define USERRET 8
-INTERRUPTS = 64
- .h8300h
- .macro SHLL2 reg
- shll.l \reg
- shll.l \reg
- .endm
- .macro SHLR2 reg
- shlr.l \reg
- shlr.l \reg
- .endm
- .macro SAVEREGS
- mov.l er0,@-sp
- mov.l er1,@-sp
- mov.l er2,@-sp
- mov.l er3,@-sp
- .endm
- .macro RESTOREREGS
- mov.l @sp+,er3
- mov.l @sp+,er2
- .endm
- .macro SAVEEXR
- .endm
- .macro RESTOREEXR
- .endm
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define USERRET 10
-#define USEREXR 8
-INTERRUPTS = 128
- .h8300s
- .macro SHLL2 reg
- shll.l #2,\reg
- .endm
- .macro SHLR2 reg
- shlr.l #2,\reg
- .endm
- .macro SAVEREGS
- stm.l er0-er3,@-sp
- .endm
- .macro RESTOREREGS
- ldm.l @sp+,er2-er3
- .endm
- .macro SAVEEXR
- mov.w @(USEREXR:16,er0),r1
- mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */
- .endm
- .macro RESTOREEXR
- mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */
- mov.b r1l,r1h
- mov.w r1,@(USEREXR:16,er0)
- .endm
-#endif
-
-
-/* CPU context save/restore macros. */
-
- .macro SAVE_ALL
- mov.l er0,@-sp
- stc ccr,r0l /* check kernel mode */
- btst #4,r0l
- bne 5f
-
- /* user mode */
- mov.l sp,@_sw_usp
- mov.l @sp,er0 /* restore saved er0 */
- orc #0x10,ccr /* switch kernel stack */
- mov.l @_sw_ksp,sp
- sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */
- SAVEREGS
- mov.l @_sw_usp,er0
- mov.l @(USERRET:16,er0),er1 /* copy the RET addr */
- mov.l er1,@(LRET-LER3:16,sp)
- SAVEEXR
-
- mov.l @(LORIG-LER3:16,sp),er0
- mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */
- mov.w e1,r1 /* e1 highbyte = ccr */
- and #0xef,r1h /* mask mode? flag */
- bra 6f
-5:
- /* kernel mode */
- mov.l @sp,er0 /* restore saved er0 */
- subs #2,sp /* set dummy ccr */
- SAVEREGS
- mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */
-6:
- mov.b r1h,r1l
- mov.b #0,r1h
- mov.w r1,@(LCCR-LER3:16,sp) /* set ccr */
- mov.l er6,@-sp /* syscall arg #6 */
- mov.l er5,@-sp /* syscall arg #5 */
- mov.l er4,@-sp /* syscall arg #4 */
- .endm /* r1 = ccr */
-
- .macro RESTORE_ALL
- mov.l @sp+,er4
- mov.l @sp+,er5
- mov.l @sp+,er6
- RESTOREREGS
- mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */
- btst #4,r0l
- bne 7f
-
- orc #0x80,ccr
- mov.l @_sw_usp,er0
- mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */
- mov.l er1,@er0
- RESTOREEXR
- mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */
- mov.b r1l,r1h
- mov.b @(LRET+1-LER1:16,sp),r1l
- mov.w r1,e1
- mov.w @(LRET+2-LER1:16,sp),r1
- mov.l er1,@(USERRET:16,er0)
-
- mov.l @sp+,er1
- add.l #(LRET-LER1),sp /* remove LORIG - LRET */
- mov.l sp,@_sw_ksp
- andc #0xef,ccr /* switch to user mode */
- mov.l er0,sp
- bra 8f
-7:
- mov.l @sp+,er1
- adds #4,sp
- adds #2,sp
-8:
- mov.l @sp+,er0
- adds #4,sp /* remove the sw created LVEC */
- rte
- .endm
-
-.globl _system_call
-.globl _ret_from_exception
-.globl _ret_from_fork
-.globl _ret_from_kernel_thread
-.globl _ret_from_interrupt
-.globl _interrupt_redirect_table
-.globl _sw_ksp,_sw_usp
-.globl _resume
-.globl _interrupt_entry
-.globl _trace_break
-
-#if defined(CONFIG_ROMKERNEL)
- .section .int_redirect,"ax"
-_interrupt_redirect_table:
-#if defined(CONFIG_CPU_H8300H)
- .rept 7
- .long 0
- .endr
-#endif
-#if defined(CONFIG_CPU_H8S)
- .rept 5
- .long 0
- .endr
- jmp @_trace_break
- .long 0
-#endif
-
- jsr @_interrupt_entry /* NMI */
- jmp @_system_call /* TRAPA #0 (System call) */
- .long 0
- .long 0
- jmp @_trace_break /* TRAPA #3 (breakpoint) */
- .rept INTERRUPTS-12
- jsr @_interrupt_entry
- .endr
-#endif
-#if defined(CONFIG_RAMKERNEL)
-.globl _interrupt_redirect_table
- .section .bss
-_interrupt_redirect_table:
- .space 4
-#endif
-
- .section .text
- .align 2
-_interrupt_entry:
- SAVE_ALL
- mov.l sp,er0
- add.l #LVEC,er0
- btst #4,r1l
- bne 1f
- /* user LVEC */
- mov.l @_sw_usp,er0
- adds #4,er0
-1:
- mov.l @er0,er0 /* LVEC address */
-#if defined(CONFIG_ROMKERNEL)
- sub.l #_interrupt_redirect_table,er0
-#endif
-#if defined(CONFIG_RAMKERNEL)
- mov.l @_interrupt_redirect_table,er1
- sub.l er1,er0
-#endif
- SHLR2 er0
- dec.l #1,er0
- mov.l sp,er1
- subs #4,er1 /* adjust ret_pc */
- jsr @_do_IRQ
- jmp @_ret_from_interrupt
-
-_system_call:
- subs #4,sp /* dummy LVEC */
- SAVE_ALL
- andc #0x7f,ccr
- mov.l er0,er4
-
- /* save top of frame */
- mov.l sp,er0
- jsr @_set_esp0
- mov.l sp,er2
- and.w #0xe000,r2
- mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l
- btst #(TIF_SYSCALL_TRACE & 7),r2l
- beq 1f
- jsr @_do_syscall_trace
-1:
- cmp.l #NR_syscalls,er4
- bcc badsys
- SHLL2 er4
- mov.l #_sys_call_table,er0
- add.l er4,er0
- mov.l @er0,er4
- beq _ret_from_exception:16
- mov.l @(LER1:16,sp),er0
- mov.l @(LER2:16,sp),er1
- mov.l @(LER3:16,sp),er2
- jsr @er4
- mov.l er0,@(LER0:16,sp) /* save the return value */
- mov.l sp,er2
- and.w #0xe000,r2
- mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l
- btst #(TIF_SYSCALL_TRACE & 7),r2l
- beq 2f
- jsr @_do_syscall_trace
-2:
-#if defined(CONFIG_SYSCALL_PRINT)
- jsr @_syscall_print
-#endif
- orc #0x80,ccr
- bra resume_userspace
-
-badsys:
- mov.l #-ENOSYS,er0
- mov.l er0,@(LER0:16,sp)
- bra resume_userspace
-
-#if !defined(CONFIG_PREEMPT)
-#define resume_kernel restore_all
-#endif
-
-_ret_from_exception:
-#if defined(CONFIG_PREEMPT)
- orc #0x80,ccr
-#endif
-_ret_from_interrupt:
- mov.b @(LCCR+1:16,sp),r0l
- btst #4,r0l
- bne resume_kernel:8 /* return from kernel */
-resume_userspace:
- andc #0x7f,ccr
- mov.l sp,er4
- and.w #0xe000,r4 /* er4 <- current thread info */
- mov.l @(TI_FLAGS:16,er4),er1
- and.l #_TIF_WORK_MASK,er1
- beq restore_all:8
-work_pending:
- btst #TIF_NEED_RESCHED,r1l
- bne work_resched:8
- /* work notifysig */
- mov.l sp,er0
- subs #4,er0 /* er0: pt_regs */
- jsr @_do_notify_resume
- bra restore_all:8
-work_resched:
- mov.l sp,er0
- jsr @_set_esp0
- jsr @_schedule
- bra resume_userspace:8
-restore_all:
- RESTORE_ALL /* Does RTE */
-
-#if defined(CONFIG_PREEMPT)
-resume_kernel:
- mov.l @(TI_PRE_COUNT:16,er4),er0
- bne restore_all:8
-need_resched:
- mov.l @(TI_FLAGS:16,er4),er0
- btst #TIF_NEED_RESCHED,r0l
- beq restore_all:8
- mov.b @(LCCR+1:16,sp),r0l /* Interrupt Enabled? */
- bmi restore_all:8
- mov.l #PREEMPT_ACTIVE,er0
- mov.l er0,@(TI_PRE_COUNT:16,er4)
- andc #0x7f,ccr
- mov.l sp,er0
- jsr @_set_esp0
- jsr @_schedule
- orc #0x80,ccr
- bra need_resched:8
-#endif
-
-_ret_from_fork:
- mov.l er2,er0
- jsr @_schedule_tail
- jmp @_ret_from_exception
-
-_ret_from_kernel_thread:
- mov.l er2,er0
- jsr @_schedule_tail
- mov.l @(LER4:16,sp),er0
- mov.l @(LER5:16,sp),er1
- jsr @er1
- jmp @_ret_from_exception
-
-_resume:
- /*
- * Beware - when entering resume, offset of tss is in d1,
- * prev (the current task) is in a0, next (the new task)
- * is in a1 and d2.b is non-zero if the mm structure is
- * shared between the tasks, so don't change these
- * registers until their contents are no longer needed.
- */
-
- /* save sr */
- sub.w r3,r3
- stc ccr,r3l
- mov.w r3,@(THREAD_CCR+2:16,er0)
-
- /* disable interrupts */
- orc #0x80,ccr
- mov.l @_sw_usp,er3
- mov.l er3,@(THREAD_USP:16,er0)
- mov.l sp,@(THREAD_KSP:16,er0)
-
- /* Skip address space switching if they are the same. */
- /* FIXME: what did we hack out of here, this does nothing! */
-
- mov.l @(THREAD_USP:16,er1),er0
- mov.l er0,@_sw_usp
- mov.l @(THREAD_KSP:16,er1),sp
-
- /* restore status register */
- mov.w @(THREAD_CCR+2:16,er1),r3
-
- ldc r3l,ccr
- rts
-
-_trace_break:
- subs #4,sp
- SAVE_ALL
- sub.l er1,er1
- dec.l #1,er1
- mov.l er1,@(LORIG,sp)
- mov.l sp,er0
- jsr @_set_esp0
- mov.l @_sw_usp,er0
- mov.l @er0,er1
- mov.w @(-2:16,er1),r2
- cmp.w #0x5730,r2
- beq 1f
- subs #2,er1
- mov.l er1,@er0
-1:
- and.w #0xff,e1
- mov.l er1,er0
- jsr @_trace_trap
- jmp @_ret_from_exception
-
- .section .bss
-_sw_ksp:
- .space 4
-_sw_usp:
- .space 4
-
- .end
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/gpio.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-/*
- * Internal I/O Port Management
- */
-
-#include <linux/stddef.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-
-#define _(addr) (volatile unsigned char *)(addr)
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
-#include <asm/regs306x.h>
-static volatile unsigned char *ddrs[] = {
- _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR),
- NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR),
-};
-#define MAX_PORT 11
-#endif
-
- #if defined(CONFIG_H83002) || defined(CONFIG_H8048)
-/* Fix me!! */
-#include <asm/regs306x.h>
-static volatile unsigned char *ddrs[] = {
- _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR),
- NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR),
-};
-#define MAX_PORT 11
-#endif
-
-#if defined(CONFIG_H8S2678)
-#include <asm/regs267x.h>
-static volatile unsigned char *ddrs[] = {
- _(P1DDR),_(P2DDR),_(P3DDR),NULL ,_(P5DDR),_(P6DDR),
- _(P7DDR),_(P8DDR),NULL, _(PADDR),_(PBDDR),_(PCDDR),
- _(PDDDR),_(PEDDR),_(PFDDR),_(PGDDR),_(PHDDR),
- _(PADDR),_(PBDDR),_(PCDDR),_(PDDDR),_(PEDDR),_(PFDDR),
- _(PGDDR),_(PHDDR)
-};
-#define MAX_PORT 17
-#endif
-#undef _
-
-#if !defined(P1DDR)
-#error Unsuppoted CPU Selection
-#endif
-
-static struct {
- unsigned char used;
- unsigned char ddr;
-} gpio_regs[MAX_PORT];
-
-extern char *_platform_gpio_table(int length);
-
-int h8300_reserved_gpio(int port, unsigned int bits)
-{
- unsigned char *used;
-
- if (port < 0 || port >= MAX_PORT)
- return -1;
- used = &(gpio_regs[port].used);
- if ((*used & bits) != 0)
- return 0;
- *used |= bits;
- return 1;
-}
-
-int h8300_free_gpio(int port, unsigned int bits)
-{
- unsigned char *used;
-
- if (port < 0 || port >= MAX_PORT)
- return -1;
- used = &(gpio_regs[port].used);
- if ((*used & bits) != bits)
- return 0;
- *used &= (~bits);
- return 1;
-}
-
-int h8300_set_gpio_dir(int port_bit,int dir)
-{
- int port = (port_bit >> 8) & 0xff;
- int bit = port_bit & 0xff;
-
- if (ddrs[port] == NULL)
- return 0;
- if (gpio_regs[port].used & bit) {
- if (dir)
- gpio_regs[port].ddr |= bit;
- else
- gpio_regs[port].ddr &= ~bit;
- *ddrs[port] = gpio_regs[port].ddr;
- return 1;
- } else
- return 0;
-}
-
-int h8300_get_gpio_dir(int port_bit)
-{
- int port = (port_bit >> 8) & 0xff;
- int bit = port_bit & 0xff;
-
- if (ddrs[port] == NULL)
- return 0;
- if (gpio_regs[port].used & bit) {
- return (gpio_regs[port].ddr & bit) != 0;
- } else
- return -1;
-}
-
-#if defined(CONFIG_PROC_FS)
-static char *port_status(int portno)
-{
- static char result[10];
- static const char io[2]={'I','O'};
- char *rp;
- int c;
- unsigned char used,ddr;
-
- used = gpio_regs[portno].used;
- ddr = gpio_regs[portno].ddr;
- result[8]='\0';
- rp = result + 7;
- for (c = 8; c > 0; c--,rp--,used >>= 1, ddr >>= 1)
- if (used & 0x01)
- *rp = io[ ddr & 0x01];
- else
- *rp = '-';
- return result;
-}
-
-static int gpio_proc_show(struct seq_file *m, void *v)
-{
- static const char port_name[]="123456789ABCDEFGH";
- int c;
-
- for (c = 0; c < MAX_PORT; c++) {
- if (ddrs[c] == NULL)
- continue;
- seq_printf(m, "P%c: %s\n", port_name[c], port_status(c));
- }
- return 0;
-}
-
-static int gpio_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, gpio_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations gpio_proc_fops = {
- .open = gpio_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static __init int register_proc(void)
-{
- return proc_create("gpio", S_IRUGO, NULL, &gpio_proc_fops) != NULL;
-}
-
-__initcall(register_proc);
-#endif
-
-void __init h8300_gpio_init(void)
-{
- memcpy(gpio_regs,_platform_gpio_table(sizeof(gpio_regs)),sizeof(gpio_regs));
-}
+++ /dev/null
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/setup.h>
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-#include <asm/gpio.h>
-
-//asmlinkage long long __ashrdi3 (long long, int);
-//asmlinkage long long __lshrdi3 (long long, int);
-extern char h8300_debug_device[];
-
-/* platform dependent support */
-
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-EXPORT_SYMBOL(ip_fast_csum);
-
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
-/* The following are special because they're not called
- explicitly (the C compiler generates them). Fortunately,
- their interface isn't gonna change any time soon now, so
- it's OK to leave it out of version control. */
-//EXPORT_SYMBOL(__ashrdi3);
-//EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler... (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __gcc_bcmp(void);
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __cmpdi2(void);
-extern void __divdi3(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __moddi3(void);
-extern void __modsi3(void);
-extern void __muldi3(void);
-extern void __mulsi3(void);
-extern void __negdi2(void);
-extern void __ucmpdi2(void);
-extern void __udivdi3(void);
-extern void __udivmoddi4(void);
-extern void __udivsi3(void);
-extern void __umoddi3(void);
-extern void __umodsi3(void);
-
- /* gcc lib functions */
-EXPORT_SYMBOL(__gcc_bcmp);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__cmpdi2);
-EXPORT_SYMBOL(__divdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__moddi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__mulsi3);
-EXPORT_SYMBOL(__negdi2);
-EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__udivmoddi4);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__umodsi3);
-
-EXPORT_SYMBOL(h8300_reserved_gpio);
-EXPORT_SYMBOL(h8300_free_gpio);
-EXPORT_SYMBOL(h8300_set_gpio_dir);
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/irq.c
- *
- * Copyright 2007 Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/random.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/traps.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/errno.h>
-
-/*#define DEBUG*/
-
-extern unsigned long *interrupt_redirect_table;
-extern const int h8300_saved_vectors[];
-extern const h8300_vector h8300_trap_table[];
-int h8300_enable_irq_pin(unsigned int irq);
-void h8300_disable_irq_pin(unsigned int irq);
-
-#define CPU_VECTOR ((unsigned long *)0x000000)
-#define ADDR_MASK (0xffffff)
-
-static inline int is_ext_irq(unsigned int irq)
-{
- return (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS));
-}
-
-static void h8300_enable_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- IER_REGS |= 1 << (data->irq - EXT_IRQ0);
-}
-
-static void h8300_disable_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- IER_REGS &= ~(1 << (data->irq - EXT_IRQ0));
-}
-
-static unsigned int h8300_startup_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- return h8300_enable_irq_pin(data->irq);
- else
- return 0;
-}
-
-static void h8300_shutdown_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- h8300_disable_irq_pin(data->irq);
-}
-
-/*
- * h8300 interrupt controller implementation
- */
-struct irq_chip h8300irq_chip = {
- .name = "H8300-INTC",
- .irq_startup = h8300_startup_irq,
- .irq_shutdown = h8300_shutdown_irq,
- .irq_enable = h8300_enable_irq,
- .irq_disable = h8300_disable_irq,
-};
-
-#if defined(CONFIG_RAMKERNEL)
-static unsigned long __init *get_vector_address(void)
-{
- unsigned long *rom_vector = CPU_VECTOR;
- unsigned long base,tmp;
- int vec_no;
-
- base = rom_vector[EXT_IRQ0] & ADDR_MASK;
-
- /* check romvector format */
- for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) {
- if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK))
- return NULL;
- }
-
- /* ramvector base address */
- base -= EXT_IRQ0*4;
-
- /* writerble check */
- tmp = ~(*(volatile unsigned long *)base);
- (*(volatile unsigned long *)base) = tmp;
- if ((*(volatile unsigned long *)base) != tmp)
- return NULL;
- return (unsigned long *)base;
-}
-
-static void __init setup_vector(void)
-{
- int i;
- unsigned long *ramvec,*ramvec_p;
- const h8300_vector *trap_entry;
- const int *saved_vector;
-
- ramvec = get_vector_address();
- if (ramvec == NULL)
- panic("interrupt vector serup failed.");
- else
- printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec);
-
- /* create redirect table */
- ramvec_p = ramvec;
- trap_entry = h8300_trap_table;
- saved_vector = h8300_saved_vectors;
- for ( i = 0; i < NR_IRQS; i++) {
- if (i == *saved_vector) {
- ramvec_p++;
- saved_vector++;
- } else {
- if ( i < NR_TRAPS ) {
- if (*trap_entry)
- *ramvec_p = VECTOR(*trap_entry);
- ramvec_p++;
- trap_entry++;
- } else
- *ramvec_p++ = REDIRECT(interrupt_entry);
- }
- }
- interrupt_redirect_table = ramvec;
-#ifdef DEBUG
- ramvec_p = ramvec;
- for (i = 0; i < NR_IRQS; i++) {
- if ((i % 8) == 0)
- printk(KERN_DEBUG "\n%p: ",ramvec_p);
- printk(KERN_DEBUG "%p ",*ramvec_p);
- ramvec_p++;
- }
- printk(KERN_DEBUG "\n");
-#endif
-}
-#else
-#define setup_vector() do { } while(0)
-#endif
-
-void __init init_IRQ(void)
-{
- int c;
-
- setup_vector();
-
- for (c = 0; c < NR_IRQS; c++)
- irq_set_chip_and_handler(c, &h8300irq_chip, handle_simple_irq);
-}
-
-asmlinkage void do_IRQ(int irq)
-{
- irq_enter();
- generic_handle_irq(irq);
- irq_exit();
-}
+++ /dev/null
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- unsigned int i;
- Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
- DEBUGP("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
- /* This is where to make the change */
- uint32_t *loc = (uint32_t *)(sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rela[i].r_offset);
- /* This is the symbol it is referring to. Note that all
- undefined symbols have been resolved. */
- Elf32_Sym *sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(rela[i].r_info);
- uint32_t v = sym->st_value + rela[i].r_addend;
-
- switch (ELF32_R_TYPE(rela[i].r_info)) {
- case R_H8_DIR24R8:
- loc = (uint32_t *)((uint32_t)loc - 1);
- *loc = (*loc & 0xff000000) | ((*loc & 0xffffff) + v);
- break;
- case R_H8_DIR24A8:
- if (ELF32_R_SYM(rela[i].r_info))
- *loc += v;
- break;
- case R_H8_DIR32:
- case R_H8_DIR32A16:
- *loc += v;
- break;
- case R_H8_PCREL16:
- v -= (unsigned long)loc + 2;
- if ((Elf32_Sword)v > 0x7fff ||
- (Elf32_Sword)v < -(Elf32_Sword)0x8000)
- goto overflow;
- else
- *(unsigned short *)loc = v;
- break;
- case R_H8_PCREL8:
- v -= (unsigned long)loc + 1;
- if ((Elf32_Sword)v > 0x7f ||
- (Elf32_Sword)v < -(Elf32_Sword)0x80)
- goto overflow;
- else
- *(unsigned char *)loc = v;
- break;
- default:
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
- me->name, ELF32_R_TYPE(rela[i].r_info));
- return -ENOEXEC;
- }
- }
- return 0;
- overflow:
- printk(KERN_ERR "module %s: relocation offset overflow: %08x\n",
- me->name, rela[i].r_offset);
- return -ENOEXEC;
-}
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/process.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Based on:
- *
- * linux/arch/m68knommu/kernel/process.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
- * Kenneth Albanowski <kjahds@kjahds.com>,
- * The Silver Hammer Group, Ltd.
- *
- * linux/arch/m68k/kernel/process.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/rcupdate.h>
-
-#include <asm/uaccess.h>
-#include <asm/traps.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-/*
- * The idle loop on an H8/300..
- */
-#if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM)
-void arch_cpu_idle(void)
-{
- local_irq_enable();
- /* XXX: race here! What if need_resched() gets set now? */
- __asm__("sleep");
-}
-#endif
-
-void machine_restart(char * __unused)
-{
- local_irq_disable();
- __asm__("jmp @@0");
-}
-
-void machine_halt(void)
-{
- local_irq_disable();
- __asm__("sleep");
- for (;;);
-}
-
-void machine_power_off(void)
-{
- local_irq_disable();
- __asm__("sleep");
- for (;;);
-}
-
-void show_regs(struct pt_regs * regs)
-{
- show_regs_print_info(KERN_DEFAULT);
-
- printk("\nPC: %08lx Status: %02x",
- regs->pc, regs->ccr);
- printk("\nORIG_ER0: %08lx ER0: %08lx ER1: %08lx",
- regs->orig_er0, regs->er0, regs->er1);
- printk("\nER2: %08lx ER3: %08lx ER4: %08lx ER5: %08lx",
- regs->er2, regs->er3, regs->er4, regs->er5);
- printk("\nER6' %08lx ",regs->er6);
- if (user_mode(regs))
- printk("USP: %08lx\n", rdusp());
- else
- printk("\n");
-}
-
-void flush_thread(void)
-{
-}
-
-int copy_thread(unsigned long clone_flags,
- unsigned long usp, unsigned long topstk,
- struct task_struct * p)
-{
- struct pt_regs * childregs;
-
- childregs = (struct pt_regs *) (THREAD_SIZE + task_stack_page(p)) - 1;
-
- if (unlikely(p->flags & PF_KTHREAD)) {
- memset(childregs, 0, sizeof(struct pt_regs));
- childregs->retpc = (unsigned long) ret_from_kernel_thread;
- childregs->er4 = topstk; /* arg */
- childregs->er5 = usp; /* fn */
- p->thread.ksp = (unsigned long)childregs;
- }
- *childregs = *current_pt_regs();
- childregs->retpc = (unsigned long) ret_from_fork;
- childregs->er0 = 0;
- p->thread.usp = usp ?: rdusp();
- p->thread.ksp = (unsigned long)childregs;
-
- return 0;
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
- return ((struct pt_regs *)tsk->thread.esp0)->pc;
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
- unsigned long fp, pc;
- unsigned long stack_page;
- int count = 0;
- if (!p || p == current || p->state == TASK_RUNNING)
- return 0;
-
- stack_page = (unsigned long)p;
- fp = ((struct pt_regs *)p->thread.ksp)->er6;
- do {
- if (fp < stack_page+sizeof(struct thread_info) ||
- fp >= 8184+stack_page)
- return 0;
- pc = ((unsigned long *)fp)[1];
- if (!in_sched_functions(pc))
- return pc;
- fp = *(unsigned long *) fp;
- } while (count++ < 16);
- return 0;
-}
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/ptrace.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Based on:
- * linux/arch/m68k/kernel/ptrace.c
- *
- * Copyright (C) 1994 by Hamish Macdonald
- * Taken from linux/kernel/ptrace.c and modified for M680x0.
- * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/signal.h>
-
-/* cpu depend functions */
-extern long h8300_get_reg(struct task_struct *task, int regno);
-extern int h8300_put_reg(struct task_struct *task, int regno, unsigned long data);
-
-
-void user_disable_single_step(struct task_struct *child)
-{
-}
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-void ptrace_disable(struct task_struct *child)
-{
- user_disable_single_step(child);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- int ret;
- int regno = addr >> 2;
- unsigned long __user *datap = (unsigned long __user *) data;
-
- switch (request) {
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp = 0;
-
- if ((addr & 3) || addr >= sizeof(struct user)) {
- ret = -EIO;
- break ;
- }
-
- ret = 0; /* Default return condition */
-
- if (regno < H8300_REGS_NO)
- tmp = h8300_get_reg(child, regno);
- else {
- switch (regno) {
- case 49:
- tmp = child->mm->start_code;
- break ;
- case 50:
- tmp = child->mm->start_data;
- break ;
- case 51:
- tmp = child->mm->end_code;
- break ;
- case 52:
- tmp = child->mm->end_data;
- break ;
- default:
- ret = -EIO;
- }
- }
- if (!ret)
- ret = put_user(tmp, datap);
- break ;
- }
-
- /* when I and D space are separate, this will have to be fixed. */
- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
- if ((addr & 3) || addr >= sizeof(struct user)) {
- ret = -EIO;
- break ;
- }
-
- if (regno == PT_ORIG_ER0) {
- ret = -EIO;
- break ;
- }
- if (regno < H8300_REGS_NO) {
- ret = h8300_put_reg(child, regno, data);
- break ;
- }
- ret = -EIO;
- break ;
-
- case PTRACE_GETREGS: { /* Get all gp regs from the child. */
- int i;
- unsigned long tmp;
- for (i = 0; i < H8300_REGS_NO; i++) {
- tmp = h8300_get_reg(child, i);
- if (put_user(tmp, datap)) {
- ret = -EFAULT;
- break;
- }
- datap++;
- }
- ret = 0;
- break;
- }
-
- case PTRACE_SETREGS: { /* Set all gp regs in the child. */
- int i;
- unsigned long tmp;
- for (i = 0; i < H8300_REGS_NO; i++) {
- if (get_user(tmp, datap)) {
- ret = -EFAULT;
- break;
- }
- h8300_put_reg(child, i, tmp);
- datap++;
- }
- ret = 0;
- break;
- }
-
- default:
- ret = ptrace_request(child, request, addr, data);
- break;
- }
- return ret;
-}
-
-asmlinkage void do_syscall_trace(void)
-{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(current->ptrace & PT_PTRACED))
- return;
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
-}
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/setup.c
- *
- * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
- * Copyright (C) 1999,2000 Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@lineo.ca>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1995 Hamish Macdonald
- * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
- * Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
- *
- * H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-/*
- * This file handles the architecture-dependent parts of system setup
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/fb.h>
-#include <linux/console.h>
-#include <linux/genhd.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/major.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-#if defined(__H8300H__)
-#define CPU "H8/300H"
-#include <asm/regs306x.h>
-#endif
-
-#if defined(__H8300S__)
-#define CPU "H8S"
-#include <asm/regs267x.h>
-#endif
-
-#define STUBSIZE 0xc000
-
-unsigned long rom_length;
-unsigned long memory_start;
-unsigned long memory_end;
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-extern int _ramstart, _ramend;
-extern char _target_name[];
-extern void h8300_gpio_init(void);
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \
- && defined(CONFIG_GDB_MAGICPRINT)
-/* printk with gdb service */
-static void gdb_console_output(struct console *c, const char *msg, unsigned len)
-{
- for (; len > 0; len--) {
- asm("mov.w %0,r2\n\t"
- "jsr @0xc4"::"r"(*msg++):"er2");
- }
-}
-
-/*
- * Setup initial baud/bits/parity. We do two things here:
- * - construct a cflag setting for the first rs_open()
- * - initialize the serial port
- * Return non-zero if we didn't find a serial port.
- */
-static int __init gdb_console_setup(struct console *co, char *options)
-{
- return 0;
-}
-
-static const struct console gdb_console = {
- .name = "gdb_con",
- .write = gdb_console_output,
- .device = NULL,
- .setup = gdb_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
- int bootmap_size;
-
- memory_start = (unsigned long) &_ramstart;
-
- /* allow for ROMFS on the end of the kernel */
- if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) {
-#if defined(CONFIG_BLK_DEV_INITRD)
- initrd_start = memory_start;
- initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]);
-#else
- memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]);
-#endif
- }
- memory_start = PAGE_ALIGN(memory_start);
-#if !defined(CONFIG_BLKDEV_RESERVE)
- memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */
-#if defined(CONFIG_GDB_DEBUG)
- memory_end -= STUBSIZE;
-#endif
-#else
- if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) &&
- (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS))
- /* overlap userarea */
- memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
-#endif
-
- init_mm.start_code = (unsigned long) _stext;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = (unsigned long) 0;
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
- register_console((struct console *)&gdb_console);
-#endif
-
- printk(KERN_INFO "\r\n\nuClinux " CPU "\n");
- printk(KERN_INFO "Target Hardware: %s\n",_target_name);
- printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
- printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
-
-#ifdef DEBUG
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
- "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
- __bss_stop);
- printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
- "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
- memory_end, memory_end, &_ramend);
-#endif
-
-#ifdef CONFIG_DEFAULT_CMDLINE
- /* set from default command line */
- if (*command_line == '\0')
- strcpy(command_line,CONFIG_KERNEL_COMMAND);
-#endif
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-
-#ifdef DEBUG
- if (strlen(*cmdline_p))
- printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
-#endif
-
- /*
- * give all the memory to the bootmap allocator, tell it to put the
- * boot mem_map at the start of memory
- */
- bootmap_size = init_bootmem_node(
- NODE_DATA(0),
- memory_start >> PAGE_SHIFT, /* map goes here */
- PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
- memory_end >> PAGE_SHIFT);
- /*
- * free the usable memory, we have to make sure we do not free
- * the bootmem bitmap so we then reserve it after freeing it :-)
- */
- free_bootmem(memory_start, memory_end - memory_start);
- reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
- /*
- * get kmalloc into gear
- */
- paging_init();
- h8300_gpio_init();
-#if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE)
- {
-#define AREABIT(addr) (1 << (((addr) >> 21) & 7))
- /* setup BSC */
- volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR;
- volatile unsigned char *cscr = (volatile unsigned char *)CSCR;
- *abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT));
- *cscr |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f;
- }
-#endif
-#ifdef DEBUG
- printk(KERN_DEBUG "Done setup_arch\n");
-#endif
-}
-
-/*
- * Get CPU information for use by the procfs.
- */
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- char *cpu;
- int mode;
- u_long clockfreq;
-
- cpu = CPU;
- mode = *(volatile unsigned char *)MDCR & 0x07;
-
- clockfreq = CONFIG_CPU_CLOCK;
-
- seq_printf(m, "CPU:\t\t%s (mode:%d)\n"
- "Clock:\t\t%lu.%1luMHz\n"
- "BogoMips:\t%lu.%02lu\n"
- "Calibration:\t%lu loops\n",
- cpu,mode,
- clockfreq/1000,clockfreq%1000,
- (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
- (loops_per_jiffy*HZ));
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * uClinux H8/300 support by Yoshinori Sato <ysato@users.sourceforge.jp>
- * and David McCullough <davidm@snapgear.com>
- *
- * Based on
- * Linux/m68k by Hamish Macdonald
- */
-
-/*
- * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
- * Atari :-) Current limitation: Only one sigstack can be active at one time.
- * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
- * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
- * signal handlers!
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/highuid.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-#include <linux/binfmts.h>
-#include <linux/tracehook.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/ucontext.h>
-
-/*
- * Do a signal return; undo the signal stack.
- *
- * Keep the return code on the stack quadword aligned!
- * That makes the cache flush below easier.
- */
-
-struct sigframe
-{
- long dummy_er0;
- long dummy_vector;
-#if defined(CONFIG_CPU_H8S)
- short dummy_exr;
-#endif
- long dummy_pc;
- char *pretcode;
- unsigned char retcode[8];
- unsigned long extramask[_NSIG_WORDS-1];
- struct sigcontext sc;
- int sig;
-} __attribute__((aligned(2),packed));
-
-struct rt_sigframe
-{
- long dummy_er0;
- long dummy_vector;
-#if defined(CONFIG_CPU_H8S)
- short dummy_exr;
-#endif
- long dummy_pc;
- char *pretcode;
- struct siginfo *pinfo;
- void *puc;
- unsigned char retcode[8];
- struct siginfo info;
- struct ucontext uc;
- int sig;
-} __attribute__((aligned(2),packed));
-
-static inline int
-restore_sigcontext(struct sigcontext *usc, int *pd0)
-{
- struct pt_regs *regs = current_pt_regs();
- int err = 0;
- unsigned int ccr;
- unsigned int usp;
- unsigned int er0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-#define COPY(r) err |= __get_user(regs->r, &usc->sc_##r) /* restore passed registers */
- COPY(er1);
- COPY(er2);
- COPY(er3);
- COPY(er5);
- COPY(pc);
- ccr = regs->ccr & 0x10;
- COPY(ccr);
-#undef COPY
- regs->ccr &= 0xef;
- regs->ccr |= ccr;
- regs->orig_er0 = -1; /* disable syscall checks */
- err |= __get_user(usp, &usc->sc_usp);
- wrusp(usp);
-
- err |= __get_user(er0, &usc->sc_er0);
- *pd0 = er0;
- return err;
-}
-
-asmlinkage int sys_sigreturn(void)
-{
- unsigned long usp = rdusp();
- struct sigframe *frame = (struct sigframe *)(usp - 4);
- sigset_t set;
- int er0;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
- (_NSIG_WORDS > 1 &&
- __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(&frame->sc, &er0))
- goto badframe;
- return er0;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(void)
-{
- unsigned long usp = rdusp();
- struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4);
- sigset_t set;
- int er0;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(&frame->uc.uc_mcontext, &er0))
- goto badframe;
-
- if (restore_altstack(&frame->uc.uc_stack))
- goto badframe;
-
- return er0;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
- unsigned long mask)
-{
- int err = 0;
-
- err |= __put_user(regs->er0, &sc->sc_er0);
- err |= __put_user(regs->er1, &sc->sc_er1);
- err |= __put_user(regs->er2, &sc->sc_er2);
- err |= __put_user(regs->er3, &sc->sc_er3);
- err |= __put_user(regs->er4, &sc->sc_er4);
- err |= __put_user(regs->er5, &sc->sc_er5);
- err |= __put_user(regs->er6, &sc->sc_er6);
- err |= __put_user(rdusp(), &sc->sc_usp);
- err |= __put_user(regs->pc, &sc->sc_pc);
- err |= __put_user(regs->ccr, &sc->sc_ccr);
- err |= __put_user(mask, &sc->sc_mask);
-
- return err;
-}
-
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
- unsigned long usp;
-
- /* Default to using normal stack. */
- usp = rdusp();
-
- /* This is the X/Open sanctioned signal stack switching. */
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (!sas_ss_flags(usp))
- usp = current->sas_ss_sp + current->sas_ss_size;
- }
- return (void *)((usp - frame_size) & -8UL);
-}
-
-static int setup_frame (int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs *regs)
-{
- struct sigframe *frame;
- int err = 0;
- int usig;
- unsigned char *ret;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= __put_user(usig, &frame->sig);
- if (err)
- goto give_sigsegv;
-
- err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
- if (err)
- goto give_sigsegv;
-
- if (_NSIG_WORDS > 1) {
- err |= copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
- if (err)
- goto give_sigsegv;
- }
-
- ret = frame->retcode;
- if (ka->sa.sa_flags & SA_RESTORER)
- ret = (unsigned char *)(ka->sa.sa_restorer);
- else {
- /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */
- err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff),
- (unsigned long *)(frame->retcode + 0));
- err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4));
- }
-
- /* Set up to return from userspace. */
- err |= __put_user(ret, &frame->pretcode);
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- wrusp ((unsigned long) frame);
- regs->pc = (unsigned long) ka->sa.sa_handler;
- regs->er0 = (current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig);
- regs->er1 = (unsigned long)&(frame->sc);
- regs->er5 = current->mm->start_data; /* GOT base */
-
- return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
-}
-
-static int setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs *regs)
-{
- struct rt_sigframe *frame;
- int err = 0;
- int usig;
- unsigned char *ret;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= __put_user(usig, &frame->sig);
- if (err)
- goto give_sigsegv;
-
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto give_sigsegv;
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, rdusp());
- err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
- err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
- if (err)
- goto give_sigsegv;
-
- /* Set up to return from userspace. */
- ret = frame->retcode;
- if (ka->sa.sa_flags & SA_RESTORER)
- ret = (unsigned char *)(ka->sa.sa_restorer);
- else {
- /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */
- err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff),
- (unsigned long *)(frame->retcode + 0));
- err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4));
- }
- err |= __put_user(ret, &frame->pretcode);
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- wrusp ((unsigned long) frame);
- regs->pc = (unsigned long) ka->sa.sa_handler;
- regs->er0 = (current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig);
- regs->er1 = (unsigned long)&(frame->info);
- regs->er2 = (unsigned long)&frame->uc;
- regs->er5 = current->mm->start_data; /* GOT base */
-
- return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
- struct pt_regs * regs)
-{
- sigset_t *oldset = sigmask_to_save();
- int ret;
- /* are we from a system call? */
- if (regs->orig_er0 >= 0) {
- switch (regs->er0) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->er0 = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->er0 = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- regs->er0 = regs->orig_er0;
- regs->pc -= 2;
- }
- }
-
- /* set up the stack frame */
- if (ka->sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(sig, ka, info, oldset, regs);
- else
- ret = setup_frame(sig, ka, oldset, regs);
-
- if (!ret)
- signal_delivered(sig, info, ka, regs, 0);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-static void do_signal(struct pt_regs *regs)
-{
- siginfo_t info;
- int signr;
- struct k_sigaction ka;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if ((regs->ccr & 0x10))
- return;
-
- current->thread.esp0 = (unsigned long) regs;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- /* Whee! Actually deliver the signal. */
- handle_signal(signr, &info, &ka, regs);
- return;
- }
- /* Did we come from a system call? */
- if (regs->orig_er0 >= 0) {
- /* Restart the system call - no handlers present */
- if (regs->er0 == -ERESTARTNOHAND ||
- regs->er0 == -ERESTARTSYS ||
- regs->er0 == -ERESTARTNOINTR) {
- regs->er0 = regs->orig_er0;
- regs->pc -= 2;
- }
- if (regs->er0 == -ERESTART_RESTARTBLOCK){
- regs->er0 = __NR_restart_syscall;
- regs->pc -= 2;
- }
- }
-
- /* If there's no signal to deliver, we just restore the saved mask. */
- restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
-{
- if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(regs);
-
- if (thread_info_flags & _TIF_NOTIFY_RESUME) {
- clear_thread_flag(TIF_NOTIFY_RESUME);
- tracehook_notify_resume(regs);
- }
-}
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/sys_h8300.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the H8/300
- * platform.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/cachectl.h>
-#include <asm/traps.h>
-#include <asm/unistd.h>
-
-/* sys_cacheflush -- no support. */
-asmlinkage int
-sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
-{
- return -EINVAL;
-}
-
-asmlinkage int sys_getpagesize(void)
-{
- return PAGE_SIZE;
-}
-
-#if defined(CONFIG_SYSCALL_PRINT)
-asmlinkage void syscall_print(void *dummy,...)
-{
- struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4);
- printk("call %06lx:%ld 1:%08lx,2:%08lx,3:%08lx,ret:%08lx\n",
- ((regs->pc)&0xffffff)-2,regs->orig_er0,regs->er1,regs->er2,regs->er3,regs->er0);
-}
-#endif
+++ /dev/null
-/* Systemcall Entry Table */
-#include <linux/sys.h>
-#include <asm/linkage.h>
-#include <asm/unistd.h>
-
-#define CALL(x) .long _ ## x
-
-.globl _sys_call_table
-
-#if defined(CONFIG_CPU_H8300H)
- .h8300h
-#endif
-#if defined(CONFIG_CPU_H8S)
- .h8300s
-#endif
- .section .text
- .align 2
-_sys_call_table:
- CALL(sys_ni_syscall) /* 0 - old "setup()" system call*/
- CALL(sys_exit)
- CALL(sys_fork)
- CALL(sys_read)
- CALL(sys_write)
- CALL(sys_open) /* 5 */
- CALL(sys_close)
- CALL(sys_waitpid)
- CALL(sys_creat)
- CALL(sys_link)
- CALL(sys_unlink) /* 10 */
- CALL(sys_execve)
- CALL(sys_chdir)
- CALL(sys_time)
- CALL(sys_mknod)
- CALL(sys_chmod) /* 15 */
- CALL(sys_chown16)
- CALL(sys_ni_syscall) /* old break syscall holder */
- CALL(sys_stat)
- CALL(sys_lseek)
- CALL(sys_getpid) /* 20 */
- CALL(sys_mount)
- CALL(sys_oldumount)
- CALL(sys_setuid16)
- CALL(sys_getuid16)
- CALL(sys_stime) /* 25 */
- CALL(sys_ptrace)
- CALL(sys_alarm)
- CALL(sys_fstat)
- CALL(sys_pause)
- CALL(sys_utime) /* 30 */
- CALL(sys_ni_syscall) /* old stty syscall holder */
- CALL(sys_ni_syscall) /* old gtty syscall holder */
- CALL(sys_access)
- CALL(sys_nice)
- CALL(sys_ni_syscall) /* 35 old ftime syscall holder */
- CALL(sys_sync)
- CALL(sys_kill)
- CALL(sys_rename)
- CALL(sys_mkdir)
- CALL(sys_rmdir) /* 40 */
- CALL(sys_dup)
- CALL(sys_pipe)
- CALL(sys_times)
- CALL(sys_ni_syscall) /* old prof syscall holder */
- CALL(sys_brk) /* 45 */
- CALL(sys_setgid16)
- CALL(sys_getgid16)
- CALL(sys_signal)
- CALL(sys_geteuid16)
- CALL(sys_getegid16) /* 50 */
- CALL(sys_acct)
- CALL(sys_umount) /* recycled never used phys() */
- CALL(sys_ni_syscall) /* old lock syscall holder */
- CALL(sys_ioctl)
- CALL(sys_fcntl) /* 55 */
- CALL(sys_ni_syscall) /* old mpx syscall holder */
- CALL(sys_setpgid)
- CALL(sys_ni_syscall) /* old ulimit syscall holder */
- CALL(sys_ni_syscall)
- CALL(sys_umask) /* 60 */
- CALL(sys_chroot)
- CALL(sys_ustat)
- CALL(sys_dup2)
- CALL(sys_getppid)
- CALL(sys_getpgrp) /* 65 */
- CALL(sys_setsid)
- CALL(sys_sigaction)
- CALL(sys_sgetmask)
- CALL(sys_ssetmask)
- CALL(sys_setreuid16) /* 70 */
- CALL(sys_setregid16)
- CALL(sys_sigsuspend)
- CALL(sys_sigpending)
- CALL(sys_sethostname)
- CALL(sys_setrlimit) /* 75 */
- CALL(sys_old_getrlimit)
- CALL(sys_getrusage)
- CALL(sys_gettimeofday)
- CALL(sys_settimeofday)
- CALL(sys_getgroups16) /* 80 */
- CALL(sys_setgroups16)
- CALL(sys_old_select)
- CALL(sys_symlink)
- CALL(sys_lstat)
- CALL(sys_readlink) /* 85 */
- CALL(sys_uselib)
- CALL(sys_swapon)
- CALL(sys_reboot)
- CALL(sys_old_readdir)
- CALL(sys_old_mmap) /* 90 */
- CALL(sys_munmap)
- CALL(sys_truncate)
- CALL(sys_ftruncate)
- CALL(sys_fchmod)
- CALL(sys_fchown16) /* 95 */
- CALL(sys_getpriority)
- CALL(sys_setpriority)
- CALL(sys_ni_syscall) /* old profil syscall holder */
- CALL(sys_statfs)
- CALL(sys_fstatfs) /* 100 */
- CALL(sys_ni_syscall) /* ioperm for i386 */
- CALL(sys_socketcall)
- CALL(sys_syslog)
- CALL(sys_setitimer)
- CALL(sys_getitimer) /* 105 */
- CALL(sys_newstat)
- CALL(sys_newlstat)
- CALL(sys_newfstat)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall) /* iopl for i386 */ /* 110 */
- CALL(sys_vhangup)
- CALL(sys_ni_syscall) /* obsolete idle() syscall */
- CALL(sys_ni_syscall) /* vm86old for i386 */
- CALL(sys_wait4)
- CALL(sys_swapoff) /* 115 */
- CALL(sys_sysinfo)
- CALL(sys_ipc)
- CALL(sys_fsync)
- CALL(sys_sigreturn)
- CALL(sys_clone) /* 120 */
- CALL(sys_setdomainname)
- CALL(sys_newuname)
- CALL(sys_cacheflush) /* modify_ldt for i386 */
- CALL(sys_adjtimex)
- CALL(sys_ni_syscall) /* 125 sys_mprotect */
- CALL(sys_sigprocmask)
- CALL(sys_ni_syscall) /* sys_create_module */
- CALL(sys_init_module)
- CALL(sys_delete_module)
- CALL(sys_ni_syscall) /* 130 sys_get_kernel_syms */
- CALL(sys_quotactl)
- CALL(sys_getpgid)
- CALL(sys_fchdir)
- CALL(sys_bdflush)
- CALL(sys_sysfs) /* 135 */
- CALL(sys_personality)
- CALL(sys_ni_syscall) /* for afs_syscall */
- CALL(sys_setfsuid16)
- CALL(sys_setfsgid16)
- CALL(sys_llseek) /* 140 */
- CALL(sys_getdents)
- CALL(sys_select)
- CALL(sys_flock)
- CALL(sys_ni_syscall) /* sys_msync */
- CALL(sys_readv) /* 145 */
- CALL(sys_writev)
- CALL(sys_getsid)
- CALL(sys_fdatasync)
- CALL(sys_sysctl)
- CALL(sys_ni_syscall) /* 150 sys_mlock */
- CALL(sys_ni_syscall) /* sys_munlock */
- CALL(sys_ni_syscall) /* sys_mlockall */
- CALL(sys_ni_syscall) /* sys_munlockall */
- CALL(sys_sched_setparam)
- CALL(sys_sched_getparam) /* 155 */
- CALL(sys_sched_setscheduler)
- CALL(sys_sched_getscheduler)
- CALL(sys_sched_yield)
- CALL(sys_sched_get_priority_max)
- CALL(sys_sched_get_priority_min) /* 160 */
- CALL(sys_sched_rr_get_interval)
- CALL(sys_nanosleep)
- CALL(sys_ni_syscall) /* sys_mremap */
- CALL(sys_setresuid16)
- CALL(sys_getresuid16) /* 165 */
- CALL(sys_ni_syscall) /* for vm86 */
- CALL(sys_ni_syscall) /* sys_query_module */
- CALL(sys_poll)
- CALL(sys_ni_syscall) /* old nfsservctl */
- CALL(sys_setresgid16) /* 170 */
- CALL(sys_getresgid16)
- CALL(sys_prctl)
- CALL(sys_rt_sigreturn)
- CALL(sys_rt_sigaction)
- CALL(sys_rt_sigprocmask) /* 175 */
- CALL(sys_rt_sigpending)
- CALL(sys_rt_sigtimedwait)
- CALL(sys_rt_sigqueueinfo)
- CALL(sys_rt_sigsuspend)
- CALL(sys_pread64) /* 180 */
- CALL(sys_pwrite64)
- CALL(sys_lchown16);
- CALL(sys_getcwd)
- CALL(sys_capget)
- CALL(sys_capset) /* 185 */
- CALL(sys_sigaltstack)
- CALL(sys_sendfile)
- CALL(sys_ni_syscall) /* streams1 */
- CALL(sys_ni_syscall) /* streams2 */
- CALL(sys_vfork) /* 190 */
- CALL(sys_getrlimit)
- CALL(sys_mmap_pgoff)
- CALL(sys_truncate64)
- CALL(sys_ftruncate64)
- CALL(sys_stat64) /* 195 */
- CALL(sys_lstat64)
- CALL(sys_fstat64)
- CALL(sys_chown)
- CALL(sys_getuid)
- CALL(sys_getgid) /* 200 */
- CALL(sys_geteuid)
- CALL(sys_getegid)
- CALL(sys_setreuid)
- CALL(sys_setregid)
- CALL(sys_getgroups) /* 205 */
- CALL(sys_setgroups)
- CALL(sys_fchown)
- CALL(sys_setresuid)
- CALL(sys_getresuid)
- CALL(sys_setresgid) /* 210 */
- CALL(sys_getresgid)
- CALL(sys_lchown)
- CALL(sys_setuid)
- CALL(sys_setgid)
- CALL(sys_setfsuid) /* 215 */
- CALL(sys_setfsgid)
- CALL(sys_pivot_root)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall)
- CALL(sys_getdents64) /* 220 */
- CALL(sys_fcntl64)
- CALL(sys_ni_syscall) /* reserved TUX */
- CALL(sys_ni_syscall) /* reserved Security */
- CALL(sys_gettid)
- CALL(sys_readahead) /* 225 */
- CALL(sys_setxattr)
- CALL(sys_lsetxattr)
- CALL(sys_fsetxattr)
- CALL(sys_getxattr)
- CALL(sys_lgetxattr) /* 230 */
- CALL(sys_fgetxattr)
- CALL(sys_listxattr)
- CALL(sys_llistxattr)
- CALL(sys_flistxattr)
- CALL(sys_removexattr) /* 235 */
- CALL(sys_lremovexattr)
- CALL(sys_fremovexattr)
- CALL(sys_tkill)
- CALL(sys_sendfile64)
- CALL(sys_futex) /* 240 */
- CALL(sys_sched_setaffinity)
- CALL(sys_sched_getaffinity)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall)
- CALL(sys_io_setup) /* 245 */
- CALL(sys_io_destroy)
- CALL(sys_io_getevents)
- CALL(sys_io_submit)
- CALL(sys_io_cancel)
- CALL(sys_fadvise64) /* 250 */
- CALL(sys_ni_syscall)
- CALL(sys_exit_group)
- CALL(sys_lookup_dcookie)
- CALL(sys_epoll_create)
- CALL(sys_epoll_ctl) /* 255 */
- CALL(sys_epoll_wait)
- CALL(sys_ni_syscall) /* sys_remap_file_pages */
- CALL(sys_set_tid_address)
- CALL(sys_timer_create)
- CALL(sys_timer_settime) /* 260 */
- CALL(sys_timer_gettime)
- CALL(sys_timer_getoverrun)
- CALL(sys_timer_delete)
- CALL(sys_clock_settime)
- CALL(sys_clock_gettime) /* 265 */
- CALL(sys_clock_getres)
- CALL(sys_clock_nanosleep)
- CALL(sys_statfs64)
- CALL(sys_fstatfs64)
- CALL(sys_tgkill) /* 270 */
- CALL(sys_utimes)
- CALL(sys_fadvise64_64)
- CALL(sys_ni_syscall) /* sys_vserver */
- CALL(sys_ni_syscall)
- CALL(sys_get_mempolicy) /* 275 */
- CALL(sys_set_mempolicy)
- CALL(sys_mq_open)
- CALL(sys_mq_unlink)
- CALL(sys_mq_timedsend)
- CALL(sys_mq_timedreceive) /* 280 */
- CALL(sys_mq_notify)
- CALL(sys_mq_getsetattr)
- CALL(sys_waitid)
- CALL(sys_ni_syscall) /* sys_kexec_load */
- CALL(sys_add_key) /* 285 */
- CALL(sys_request_key)
- CALL(sys_keyctl)
- CALL(sys_ioprio_set)
- CALL(sys_ioprio_get) /* 290 */
- CALL(sys_inotify_init)
- CALL(sys_inotify_add_watch)
- CALL(sys_inotify_rm_watch)
- CALL(sys_migrate_pages)
- CALL(sys_openat) /* 295 */
- CALL(sys_mkdirat)
- CALL(sys_mknodat)
- CALL(sys_fchownat)
- CALL(sys_futimesat)
- CALL(sys_fstatat64) /* 300 */
- CALL(sys_unlinkat)
- CALL(sys_renameat)
- CALL(sys_linkat)
- CALL(sys_symlinkat)
- CALL(sys_readlinkat) /* 305 */
- CALL(sys_fchmodat)
- CALL(sys_faccessat)
- CALL(sys_ni_syscall) /* sys_pselect6 */
- CALL(sys_ni_syscall) /* sys_ppoll */
- CALL(sys_unshare) /* 310 */
- CALL(sys_set_robust_list)
- CALL(sys_get_robust_list)
- CALL(sys_splice)
- CALL(sys_sync_file_range)
- CALL(sys_tee) /* 315 */
- CALL(sys_vmsplice)
- CALL(sys_ni_syscall) /* sys_move_pages */
- CALL(sys_getcpu)
- CALL(sys_ni_syscall) /* sys_epoll_pwait */
- CALL(sys_setns) /* 320 */
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/time.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Copied/hacked from:
- *
- * linux/arch/m68k/kernel/time.c
- *
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- *
- * This file contains the m68k-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
- * "A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/irq_regs.h>
-#include <asm/timer.h>
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-void h8300_timer_tick(void)
-{
- if (current->pid)
- profile_tick(CPU_PROFILING);
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- /* FIX by dqg : Set to zero for platforms that don't have tod */
- /* without this time is undefined and can overflow time_t, causing */
- /* very strange errors */
- year = 1980;
- mon = day = 1;
- hour = min = sec = 0;
-#ifdef CONFIG_H8300_GETTOD
- h8300_gettod (&year, &mon, &day, &hour, &min, &sec);
-#endif
- if ((year += 1900) < 1970)
- year += 100;
- ts->tv_sec = mktime(year, mon, day, hour, min, sec);
- ts->tv_nsec = 0;
-}
-
-void __init time_init(void)
-{
-
- h8300_timer_setup();
-}
+++ /dev/null
-# h8300 internal timer handler
-
-obj-$(CONFIG_H8300_TIMER8) := timer8.o
-obj-$(CONFIG_H8300_TIMER16) := timer16.o
-obj-$(CONFIG_H8300_ITU) := itu.o
-obj-$(CONFIG_H8300_TPU) := tpu.o
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/timer/itu.c
- *
- * Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- * ITU Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-#if CONFIG_H8300_ITU_CH == 0
-#define ITUBASE 0xffff64
-#define ITUIRQ 24
-#elif CONFIG_H8300_ITU_CH == 1
-#define ITUBASE 0xffff6e
-#define ITUIRQ 28
-#elif CONFIG_H8300_ITU_CH == 2
-#define ITUBASE 0xffff78
-#define ITUIRQ 32
-#elif CONFIG_H8300_ITU_CH == 3
-#define ITUBASE 0xffff82
-#define ITUIRQ 36
-#elif CONFIG_H8300_ITU_CH == 4
-#define ITUBASE 0xffff92
-#define ITUIRQ 40
-#else
-#error Unknown timer channel.
-#endif
-
-#define TCR 0
-#define TIOR 1
-#define TIER 2
-#define TSR 3
-#define TCNT 4
-#define GRA 6
-#define GRB 8
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(IMFA, ITUBASE + TSR);
- return IRQ_HANDLED;
-}
-
-static struct irqaction itu_irq = {
- .name = "itu",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {1, 2, 4, 8};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int div;
- unsigned int cnt;
-
- calc_param(cnt, div, divide_rate, 0x10000);
-
- setup_irq(ITUIRQ, &itu_irq);
-
- /* initialize timer */
- ctrl_outb(0, TSTR);
- ctrl_outb(CCLR0 | div, ITUBASE + TCR);
- ctrl_outb(0x01, ITUBASE + TIER);
- ctrl_outw(cnt, ITUBASE + GRA);
- ctrl_bset(CONFIG_H8300_ITU_CH, TSTR);
-}
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/timer/timer16.c
- *
- * Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- * 16bit Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-/* 16bit timer */
-#if CONFIG_H8300_TIMER16_CH == 0
-#define _16BASE 0xffff78
-#define _16IRQ 24
-#elif CONFIG_H8300_TIMER16_CH == 1
-#define _16BASE 0xffff80
-#define _16IRQ 28
-#elif CONFIG_H8300_TIMER16_CH == 2
-#define _16BASE 0xffff88
-#define _16IRQ 32
-#else
-#error Unknown timer channel.
-#endif
-
-#define TCR 0
-#define TIOR 1
-#define TCNT 2
-#define GRA 4
-#define GRB 6
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*10000 /* Timer input freq. */
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(CONFIG_H8300_TIMER16_CH, TISRA);
- return IRQ_HANDLED;
-}
-
-static struct irqaction timer16_irq = {
- .name = "timer-16",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {1, 2, 4, 8};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int div;
- unsigned int cnt;
-
- calc_param(cnt, div, divide_rate, 0x10000);
-
- setup_irq(_16IRQ, &timer16_irq);
-
- /* initialize timer */
- ctrl_outb(0, TSTR);
- ctrl_outb(CCLR0 | div, _16BASE + TCR);
- ctrl_outw(cnt, _16BASE + GRA);
- ctrl_bset(4 + CONFIG_H8300_TIMER16_CH, TISRA);
- ctrl_bset(CONFIG_H8300_TIMER16_CH, TSTR);
-}
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/cpu/timer/timer8.c
- *
- * Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- * 8bit Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/timer.h>
-#if defined(CONFIG_CPU_H8300H)
-#include <asm/regs306x.h>
-#endif
-#if defined(CONFIG_CPU_H8S)
-#include <asm/regs267x.h>
-#endif
-
-/* 8bit timer x2 */
-#define CMFA 6
-
-#if defined(CONFIG_H8300_TIMER8_CH0)
-#define _8BASE _8TCR0
-#ifdef CONFIG_CPU_H8300H
-#define _8IRQ 36
-#endif
-#ifdef CONFIG_CPU_H8S
-#define _8IRQ 72
-#endif
-#elif defined(CONFIG_H8300_TIMER8_CH2)
-#ifdef CONFIG_CPU_H8300H
-#define _8BASE _8TCR2
-#define _8IRQ 40
-#endif
-#endif
-
-#ifndef _8BASE
-#error Unknown timer channel.
-#endif
-
-#define _8TCR 0
-#define _8TCSR 2
-#define TCORA 4
-#define TCORB 6
-#define _8TCNT 8
-
-#define CMIEA 0x40
-#define CCLR_CMA 0x08
-#define CKS2 0x04
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(CMFA, _8BASE + _8TCSR);
- return IRQ_HANDLED;
-}
-
-static struct irqaction timer8_irq = {
- .name = "timer-8",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {8, 64, 8192};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int div;
- unsigned int cnt;
-
- calc_param(cnt, div, divide_rate, 0x10000);
- div++;
-
- setup_irq(_8IRQ, &timer8_irq);
-
-#if defined(CONFIG_CPU_H8S)
- /* Timer module enable */
- ctrl_bclr(0, MSTPCRL)
-#endif
-
- /* initialize timer */
- ctrl_outw(cnt, _8BASE + TCORA);
- ctrl_outw(0x0000, _8BASE + _8TCSR);
- ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,
- _8BASE + _8TCR);
-}
+++ /dev/null
-/*
- * linux/arch/h8300/kernel/timer/tpu.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * TPU Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs267x.h>
-
-/* TPU */
-#if CONFIG_H8300_TPU_CH == 0
-#define TPUBASE 0xffffd0
-#define TPUIRQ 40
-#elif CONFIG_H8300_TPU_CH == 1
-#define TPUBASE 0xffffe0
-#define TPUIRQ 48
-#elif CONFIG_H8300_TPU_CH == 2
-#define TPUBASE 0xfffff0
-#define TPUIRQ 52
-#elif CONFIG_H8300_TPU_CH == 3
-#define TPUBASE 0xfffe80
-#define TPUIRQ 56
-#elif CONFIG_H8300_TPU_CH == 4
-#define TPUBASE 0xfffe90
-#define TPUIRQ 64
-#else
-#error Unknown timer channel.
-#endif
-
-#define _TCR 0
-#define _TMDR 1
-#define _TIOR 2
-#define _TIER 4
-#define _TSR 5
-#define _TCNT 6
-#define _GRA 8
-#define _GRB 10
-
-#define CCLR0 0x20
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(0, TPUBASE + _TSR);
- return IRQ_HANDLED;
-}
-
-static struct irqaction tpu_irq = {
- .name = "tpu",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {
-#if CONFIG_H8300_TPU_CH == 0
- 1,4,16,64,0,0,0,0,
-#elif (CONFIG_H8300_TPU_CH == 1) || (CONFIG_H8300_TPU_CH == 5)
- 1,4,16,64,0,0,256,0,
-#elif (CONFIG_H8300_TPU_CH == 2) || (CONFIG_H8300_TPU_CH == 4)
- 1,4,16,64,0,0,0,1024,
-#elif CONFIG_H8300_TPU_CH == 3
- 1,4,16,64,0,1024,256,4096,
-#endif
-};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int cnt;
- unsigned int div;
-
- calc_param(cnt, div, divide_rate, 0x10000);
-
- setup_irq(TPUIRQ, &tpu_irq);
-
- /* TPU module enabled */
- ctrl_bclr(3, MSTPCRH);
-
- ctrl_outb(0, TSTR);
- ctrl_outb(CCLR0 | div, TPUBASE + _TCR);
- ctrl_outb(0, TPUBASE + _TMDR);
- ctrl_outw(0, TPUBASE + _TIOR);
- ctrl_outb(0x01, TPUBASE + _TIER);
- ctrl_outw(cnt, TPUBASE + _GRA);
- ctrl_bset(CONFIG_H8300_TPU_CH, TSTR);
-}
+++ /dev/null
-/*
- * linux/arch/h8300/boot/traps.c -- general exception handling code
- * H8/300 support Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Cloned from Linux/m68k.
- *
- * No original Copyright holder listed,
- * Probable original (C) Roman Zippel (assigned DJD, 1999)
- *
- * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/bug.h>
-
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/page.h>
-
-static DEFINE_SPINLOCK(die_lock);
-
-/*
- * this must be called very early as the kernel might
- * use some instruction that are emulated on the 060
- */
-
-void __init base_trap_init(void)
-{
-}
-
-void __init trap_init (void)
-{
-}
-
-asmlinkage void set_esp0 (unsigned long ssp)
-{
- current->thread.esp0 = ssp;
-}
-
-/*
- * Generic dumping code. Used for panic and debug.
- */
-
-static void dump(struct pt_regs *fp)
-{
- unsigned long *sp;
- unsigned char *tp;
- int i;
-
- printk("\nCURRENT PROCESS:\n\n");
- printk("COMM=%s PID=%d\n", current->comm, current->pid);
- if (current->mm) {
- printk("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
- (int) current->mm->start_code,
- (int) current->mm->end_code,
- (int) current->mm->start_data,
- (int) current->mm->end_data,
- (int) current->mm->end_data,
- (int) current->mm->brk);
- printk("USER-STACK=%08x KERNEL-STACK=%08lx\n\n",
- (int) current->mm->start_stack,
- (int) PAGE_SIZE+(unsigned long)current);
- }
-
- show_regs(fp);
- printk("\nCODE:");
- tp = ((unsigned char *) fp->pc) - 0x20;
- for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
- if ((i % 0x10) == 0)
- printk("\n%08x: ", (int) (tp + i));
- printk("%08x ", (int) *sp++);
- }
- printk("\n");
-
- printk("\nKERNEL STACK:");
- tp = ((unsigned char *) fp) - 0x40;
- for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
- if ((i % 0x10) == 0)
- printk("\n%08x: ", (int) (tp + i));
- printk("%08x ", (int) *sp++);
- }
- printk("\n");
- if (STACK_MAGIC != *(unsigned long *)((unsigned long)current+PAGE_SIZE))
- printk("(Possibly corrupted stack page??)\n");
-
- printk("\n\n");
-}
-
-void die(const char *str, struct pt_regs *fp, unsigned long err)
-{
- static int diecount;
-
- oops_enter();
-
- console_verbose();
- spin_lock_irq(&die_lock);
- report_bug(fp->pc, fp);
- printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++diecount);
- dump(fp);
-
- spin_unlock_irq(&die_lock);
- do_exit(SIGSEGV);
-}
-
-extern char _start, _etext;
-#define check_kernel_text(addr) \
- ((addr >= (unsigned long)(&_start)) && \
- (addr < (unsigned long)(&_etext)))
-
-static int kstack_depth_to_print = 24;
-
-void show_stack(struct task_struct *task, unsigned long *esp)
-{
- unsigned long *stack, addr;
- int i;
-
- if (esp == NULL)
- esp = (unsigned long *) &esp;
-
- stack = esp;
-
- printk("Stack from %08lx:", (unsigned long)stack);
- for (i = 0; i < kstack_depth_to_print; i++) {
- if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0)
- break;
- if (i % 8 == 0)
- printk("\n ");
- printk(" %08lx", *stack++);
- }
-
- printk("\nCall Trace:");
- i = 0;
- stack = esp;
- while (((unsigned long)stack & (THREAD_SIZE - 1)) != 0) {
- addr = *stack++;
- /*
- * If the address is either in the text segment of the
- * kernel, or in the region which contains vmalloc'ed
- * memory, it *may* be the address of a calling
- * routine; if so, print it so that someone tracing
- * down the cause of the crash will be able to figure
- * out the call path that was taken.
- */
- if (check_kernel_text(addr)) {
- if (i % 4 == 0)
- printk("\n ");
- printk(" [<%08lx>]", addr);
- i++;
- }
- }
- printk("\n");
-}
-
-void show_trace_task(struct task_struct *tsk)
-{
- show_stack(tsk,(unsigned long *)tsk->thread.esp0);
-}
+++ /dev/null
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-
-/* target memory map */
-#ifdef CONFIG_H8300H_GENERIC
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x400000
-#endif
-
-#ifdef CONFIG_H8300H_AKI3068NET
-#define ROMTOP 0x000000
-#define ROMSIZE 0x080000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x200000
-#endif
-
-#ifdef CONFIG_H8300H_H8MAX
-#define ROMTOP 0x000000
-#define ROMSIZE 0x080000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x200000
-#endif
-
-#ifdef CONFIG_H8300H_SIM
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x400000
-#endif
-
-#ifdef CONFIG_H8S_SIM
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x800000
-#endif
-
-#ifdef CONFIG_H8S_EDOSK2674
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x800000
-#endif
-
-#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)
-INPUT(romfs.o)
-#endif
-
-_jiffies = _jiffies_64 + 4;
-
-ENTRY(__start)
-
-SECTIONS
-{
-#if defined(CONFIG_ROMKERNEL)
- . = ROMTOP;
- .vectors :
- {
- __vector = . ;
- *(.vectors*)
- }
-#else
- . = RAMTOP;
- .bootvec :
- {
- *(.bootvec)
- }
-#endif
- .text :
- {
- _text = .;
-#if defined(CONFIG_ROMKERNEL)
- *(.int_redirect)
-#endif
- __stext = . ;
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- __etext = . ;
- }
- EXCEPTION_TABLE(16)
-
- RODATA
-#if defined(CONFIG_ROMKERNEL)
- SECURITY_INIT
-#endif
- ROEND = .;
-#if defined(CONFIG_ROMKERNEL)
- . = RAMTOP;
- .data : AT(ROEND)
-#else
- .data :
-#endif
- {
- __sdata = . ;
- ___data_start = . ;
-
- INIT_TASK_DATA(0x2000)
- . = ALIGN(0x4) ;
- DATA_DATA
- . = ALIGN(0x4) ;
- *(.data.*)
-
- . = ALIGN(0x4) ;
- ___init_begin = .;
- __sinittext = .;
- INIT_TEXT
- __einittext = .;
- INIT_DATA
- . = ALIGN(0x4) ;
- INIT_SETUP(0x4)
- ___setup_start = .;
- *(.init.setup)
- . = ALIGN(0x4) ;
- ___setup_end = .;
- INIT_CALLS
- CON_INITCALL
- EXIT_TEXT
- EXIT_DATA
- INIT_RAM_FS
- . = ALIGN(0x4) ;
- ___init_end = .;
- __edata = . ;
- }
-#if defined(CONFIG_RAMKERNEL)
- SECURITY_INIT
-#endif
- __begin_data = LOADADDR(.data);
- .bss :
- {
- . = ALIGN(0x4) ;
- __sbss = . ;
- ___bss_start = . ;
- *(.bss*)
- . = ALIGN(0x4) ;
- *(COMMON)
- . = ALIGN(0x4) ;
- ___bss_stop = . ;
- __ebss = . ;
- __end = . ;
- __ramstart = .;
- }
- .romfs :
- {
- *(.romfs*)
- }
- . = RAMTOP+RAMSIZE;
- .dummy :
- {
- COMMAND_START = . - 0x200 ;
- __ramend = . ;
- }
-
- DISCARDS
-}
+++ /dev/null
-#
-# Makefile for H8/300-specific library files..
-#
-
-lib-y = ashrdi3.o checksum.o memcpy.o memset.o abs.o romfs.o
+++ /dev/null
-;;; abs.S
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
- .text
-.global _abs
-
-;;; int abs(int n)
-_abs:
- mov.l er0,er0
- bpl 1f
- neg.l er0
-1:
- rts
-
+++ /dev/null
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode (SI)));
-typedef unsigned int USItype __attribute__ ((mode (SI)));
-typedef int DItype __attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
- struct DIstruct s;
- DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
- DIunion w;
- word_type bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
- w.s.low = uu.s.high >> -bm;
- }
- else
- {
- USItype carries = (USItype)uu.s.high << bm;
- w.s.high = uu.s.high >> b;
- w.s.low = ((USItype)uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
+++ /dev/null
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
- * Fixed some nasty bugs, causing some horrible crashes.
- * A: At some points, the sum (%0) was used as
- * length-counter instead of the length counter
- * (%1). Thanks to Roman Hodek for pointing this out.
- * B: GCC seems to mess up if one uses too many
- * data-registers to hold input values and one tries to
- * specify d0 and d1 as scratch registers. Letting gcc choose these
- * registers itself solves the problem.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
- of the assembly has to go. */
-
-#include <net/checksum.h>
-#include <linux/module.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
- /* add up 16-bit and 16-bit for 16+c bit */
- x = (x & 0xffff) + (x >> 16);
- /* add up carry.. */
- x = (x & 0xffff) + (x >> 16);
- return x;
-}
-
-static unsigned long do_csum(const unsigned char * buff, int len)
-{
- int odd, count;
- unsigned long result = 0;
-
- if (len <= 0)
- goto out;
- odd = 1 & (unsigned long) buff;
- if (odd) {
- result = *buff;
- len--;
- buff++;
- }
- count = len >> 1; /* nr of 16-bit words.. */
- if (count) {
- if (2 & (unsigned long) buff) {
- result += *(unsigned short *) buff;
- count--;
- len -= 2;
- buff += 2;
- }
- count >>= 1; /* nr of 32-bit words.. */
- if (count) {
- unsigned long carry = 0;
- do {
- unsigned long w = *(unsigned long *) buff;
- count--;
- buff += 4;
- result += carry;
- result += w;
- carry = (w > result);
- } while (count);
- result += carry;
- result = (result & 0xffff) + (result >> 16);
- }
- if (len & 2) {
- result += *(unsigned short *) buff;
- buff += 2;
- }
- }
- if (len & 1)
- result += (*buff << 8);
- result = from32to16(result);
- if (odd)
- result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
- return result;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-/*
- * Egads... That thing apparently assumes that *all* checksums it ever sees will
- * be folded. Very likely a bug.
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
- unsigned int result = do_csum(buff, len);
-
- /* add in old sum, and carry.. */
- result += (__force u32)sum;
- /* 16+c bits -> 16 bits */
- result = (result & 0xffff) + (result >> 16);
- return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
- __wsum sum, int *csum_err)
-{
- if (csum_err) *csum_err = 0;
- memcpy(dst, (__force const void *)src, len);
- return csum_partial(dst, len, sum);
-}
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
+++ /dev/null
-;;; memcpy.S
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
-
- .text
-.global _memcpy
-
-;;; void *memcpy(void *to, void *from, size_t n)
-_memcpy:
- mov.l er2,er2
- bne 1f
- rts
-1:
- ;; address check
- bld #0,r0l
- bxor #0,r1l
- bcs 4f
- mov.l er4,@-sp
- mov.l er0,@-sp
- btst #0,r0l
- beq 1f
- ;; (aligned even) odd address
- mov.b @er1,r3l
- mov.b r3l,@er0
- adds #1,er1
- adds #1,er0
- dec.l #1,er2
- beq 3f
-1:
- ;; n < sizeof(unsigned long) check
- sub.l er4,er4
- adds #4,er4 ; loop count check value
- cmp.l er4,er2
- blo 2f
- ;; unsigned long copy
-1:
- mov.l @er1,er3
- mov.l er3,@er0
- adds #4,er0
- adds #4,er1
- subs #4,er2
- cmp.l er4,er2
- bcc 1b
- ;; rest
-2:
- mov.l er2,er2
- beq 3f
-1:
- mov.b @er1,r3l
- mov.b r3l,@er0
- adds #1,er1
- adds #1,er0
- dec.l #1,er2
- bne 1b
-3:
- mov.l @sp+,er0
- mov.l @sp+,er4
- rts
-
- ;; odd <- even / even <- odd
-4:
- mov.l er4,er3
- mov.l er2,er4
- mov.l er5,er2
- mov.l er1,er5
- mov.l er6,er1
- mov.l er0,er6
-1:
- eepmov.w
- mov.w r4,r4
- bne 1b
- dec.w #1,e4
- bpl 1b
- mov.l er1,er6
- mov.l er2,er5
- mov.l er3,er4
- rts
+++ /dev/null
-/* memset.S */
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
- .text
-
-.global _memset
-
-;;void *memset(*ptr, int c, size_t count)
-;; ptr = er0
-;; c = er1(r1l)
-;; count = er2
-_memset:
- btst #0,r0l
- beq 2f
-
- ;; odd address
-1:
- mov.b r1l,@er0
- adds #1,er0
- dec.l #1,er2
- beq 6f
-
- ;; even address
-2:
- mov.l er2,er3
- cmp.l #4,er2
- blo 4f
- ;; count>=4 -> count/4
-#if defined(__H8300H__)
- shlr.l er2
- shlr.l er2
-#endif
-#if defined(__H8300S__)
- shlr.l #2,er2
-#endif
- ;; byte -> long
- mov.b r1l,r1h
- mov.w r1,e1
-3:
- mov.l er1,@er0
- adds #4,er0
- dec.l #1,er2
- bne 3b
-4:
- ;; count % 4
- and.b #3,r3l
- beq 6f
-5:
- mov.b r1l,@er0
- adds #1,er0
- dec.b r3l
- bne 5b
-6:
- rts
+++ /dev/null
-/* romfs move to __ebss */
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
-
-#define BLKOFFSET 512
-
- .text
-.globl __move_romfs
-_romfs_sig_len = 8
-
-__move_romfs:
- mov.l #__sbss,er0
- mov.l #_romfs_sig,er1
- mov.b #_romfs_sig_len,r3l
-1: /* check romfs image */
- mov.b @er0+,r2l
- mov.b @er1+,r2h
- cmp.b r2l,r2h
- bne 2f
- dec.b r3l
- bne 1b
-
- /* find romfs image */
- mov.l @__sbss+8,er0 /* romfs length(be) */
- mov.l #__sbss,er1
- add.l er0,er1 /* romfs image end */
- mov.l #__ebss,er2
- add.l er0,er2 /* distination address */
-#if defined(CONFIG_INTELFLASH)
- add.l #BLKOFFSET,er2
-#endif
- adds #2,er0
- adds #1,er0
- shlr er0
- shlr er0 /* transfer length */
-1:
- mov.l @er1,er3 /* copy image */
- mov.l er3,@er2
- subs #4,er1
- subs #4,er2
- dec.l #1,er0
- bpl 1b
-2:
- rts
-
- .section .rodata
-_romfs_sig:
- .ascii "-rom1fs-"
-
- .end
+++ /dev/null
-#
-# Makefile for the linux m68k-specific parts of the memory manager.
-#
-
-obj-y := init.o fault.o memory.o kmap.o
+++ /dev/null
-/*
- * linux/arch/h8300/mm/fault.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68knommu/mm/fault.c
- * linux/arch/m68k/mm/fault.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-
-#include <asm/pgtable.h>
-
-/*
- * This routine handles page faults. It determines the problem, and
- * then passes it off to one of the appropriate routines.
- *
- * error_code:
- * bit 0 == 0 means no page found, 1 means protection fault
- * bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
- */
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
- unsigned long error_code)
-{
-#ifdef DEBUG
- printk ("regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
- regs->sr, regs->pc, address, error_code);
-#endif
-
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
- if ((unsigned long) address < PAGE_SIZE) {
- printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
- } else
- printk(KERN_ALERT "Unable to handle kernel access");
- printk(" at virtual address %08lx\n",address);
- if (!user_mode(regs))
- die("Oops", regs, error_code);
- do_exit(SIGKILL);
-
- return 1;
-}
-
+++ /dev/null
-/*
- * linux/arch/h8300/mm/init.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68knommu/mm/init.c
- * linux/arch/m68k/mm/init.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
- * DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-#undef DEBUG
-
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving a inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-static unsigned long empty_bad_page_table;
-
-static unsigned long empty_bad_page;
-
-unsigned long empty_zero_page;
-
-extern unsigned long rom_length;
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-/*
- * paging_init() continues the virtual memory environment setup which
- * was begun by the code in arch/head.S.
- * The parameters are pointers to where to stick the starting and ending
- * addresses of available kernel virtual memory.
- */
-void __init paging_init(void)
-{
- /*
- * Make sure start_mem is page aligned, otherwise bootmem and
- * page_alloc get different views og the world.
- */
-#ifdef DEBUG
- unsigned long start_mem = PAGE_ALIGN(memory_start);
-#endif
- unsigned long end_mem = memory_end & PAGE_MASK;
-
-#ifdef DEBUG
- printk ("start_mem is %#lx\nvirtual_end is %#lx\n",
- start_mem, end_mem);
-#endif
-
- /*
- * Initialize the bad page table and bad page to point
- * to a couple of allocated pages.
- */
- empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- memset((void *)empty_zero_page, 0, PAGE_SIZE);
-
- /*
- * Set up SFC/DFC registers (user data space).
- */
- set_fs (USER_DS);
-
-#ifdef DEBUG
- printk ("before free_area_init\n");
-
- printk ("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
- start_mem, end_mem);
-#endif
-
- {
- unsigned long zones_size[MAX_NR_ZONES] = {0, };
-
- zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT;
- zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = 0;
-#endif
- free_area_init(zones_size);
- }
-}
-
-void __init mem_init(void)
-{
- unsigned long codesize = _etext - _stext;
-
- pr_devel("Mem_init: start=%lx, end=%lx\n", memory_start, memory_end);
-
- high_memory = (void *) (memory_end & PAGE_MASK);
- max_mapnr = MAP_NR(high_memory);
-
- /* this will put all low memory onto the freelists */
- free_all_bootmem();
-
- mem_init_print_info(NULL);
- if (rom_length > 0 && rom_length > codesize)
- pr_info("Memory available: %luK/%luK ROM\n",
- (rom_length - codesize) >> 10, rom_length >> 10);
-}
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- free_reserved_area((void *)start, (void *)end, -1, "initrd");
-}
-#endif
-
-void
-free_initmem(void)
-{
-#ifdef CONFIG_RAMKERNEL
- free_initmem_default(-1);
-#endif
-}
-
+++ /dev/null
-/*
- * linux/arch/h8300/mm/kmap.c
- *
- * Based on
- * linux/arch/m68knommu/mm/kmap.c
- *
- * Copyright (C) 2000 Lineo, <davidm@snapgear.com>
- * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com>
- */
-
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/vmalloc.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#undef DEBUG
-
-#define VIRT_OFFSET (0x01000000)
-
-/*
- * Map some physical address range into the kernel address space.
- */
-void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
-{
- return (void *)(physaddr + VIRT_OFFSET);
-}
-
-/*
- * Unmap a ioremap()ed region again.
- */
-void iounmap(void *addr)
-{
-}
-
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-}
-
-/*
- * Set new cache mode for some kernel address space.
- * The caller must push data for that range itself, if such data may already
- * be in the cache.
- */
-void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
-{
-}
+++ /dev/null
-/*
- * linux/arch/h8300/mm/memory.c
- *
- * Copyright (C) 2002 Yoshinori Sato <ysato@users.sourceforge.jp>,
- *
- * Based on:
- *
- * linux/arch/m68knommu/mm/memory.c
- *
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/memory.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/io.h>
-
-void cache_clear (unsigned long paddr, int len)
-{
-}
-
-
-void cache_push (unsigned long paddr, int len)
-{
-}
-
-void cache_push_v (unsigned long vaddr, int len)
-{
-}
-
-/*
- * Map some physical address range into the kernel address space.
- */
-
-unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp )
-{
- return paddr;
-}
-
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-# Reuse any files we can from the H8/300H
-#
-
-obj-y := irq.o ptrace_h8300h.o
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_ram.o
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: AE-3068 (aka. aki3068net)
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global _command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0xff,0xff
- ;; P2DDR
- .byte 0xff,0xff
- ;; P3DDR
- .byte 0xff,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x01,0x01
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x0c,0x0c
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x30,0x30
-
-__target_name:
- .asciz "AE-3068"
-
- .section .bootvec,"ax"
- jmp @__start
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_$(MODEL).o
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8300h/generic/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: AE-3068 (aka. aki3068net)
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global _command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
-#if defined(CONFIG_BLK_DEV_BLKMEM)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
-
-__target_name:
- .asciz "generic"
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8300h/generic/crt0_rom.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: generic
- * Memory Layout : ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
- .section .text
- .file "crt0_rom.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #__ramend,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy .data */
-#if !defined(CONFIG_H8300H_SIM)
- /* copy .data */
- mov.l #__begin_data,er5
- mov.l #__sdata,er6
- mov.l #__edata,er4
- sub.l er6,er4
- shlr.l er4
- shlr.l er4
-1:
- mov.l @er5+,er0
- mov.l er0,@er6
- adds #4,er6
- dec.l #1,er4
- bne 1b
-#endif
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #__command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* linux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
-
- .section .rodata
-__target_name:
- .asciz "generic"
-
- .section .bss
-__command_line:
- .space 512
-
- /* interrupt vector */
- .section .vectors,"ax"
- .long __start
-vector = 1
- .rept 64-1
- .long _interrupt_redirect_table+vector*4
-vector = vector + 1
- .endr
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_ram.o
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8300h/h8max/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: H8MAX
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global _command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0xff,0xff
- ;; P2DDR
- .byte 0xff,0xff
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x01,0x01
- ;; P6DDR
- .byte 0xf6,0xf6
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0xee,0xee
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x30,0x30
-
-__target_name:
- .asciz "H8MAX"
-
- .section .bootvec,"ax"
- jmp @__start
+++ /dev/null
-/*
- * Interrupt handling H8/300H depend.
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/gpio-internal.h>
-#include <asm/regs306x.h>
-
-const int __initconst h8300_saved_vectors[] = {
-#if defined(CONFIG_GDB_DEBUG)
- TRAP3_VEC, /* TRAPA #3 is GDB breakpoint */
-#endif
- -1,
-};
-
-const h8300_vector __initconst h8300_trap_table[] = {
- 0, 0, 0, 0, 0, 0, 0, 0,
- system_call,
- 0,
- 0,
- trace_break,
-};
-
-int h8300_enable_irq_pin(unsigned int irq)
-{
- int bitmask;
- if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
- return 0;
-
- /* initialize IRQ pin */
- bitmask = 1 << (irq - EXT_IRQ0);
- switch(irq) {
- case EXT_IRQ0:
- case EXT_IRQ1:
- case EXT_IRQ2:
- case EXT_IRQ3:
- if (H8300_GPIO_RESERVE(H8300_GPIO_P8, bitmask) == 0)
- return -EBUSY;
- H8300_GPIO_DDR(H8300_GPIO_P8, bitmask, H8300_GPIO_INPUT);
- break;
- case EXT_IRQ4:
- case EXT_IRQ5:
- if (H8300_GPIO_RESERVE(H8300_GPIO_P9, bitmask) == 0)
- return -EBUSY;
- H8300_GPIO_DDR(H8300_GPIO_P9, bitmask, H8300_GPIO_INPUT);
- break;
- }
-
- return 0;
-}
-
-void h8300_disable_irq_pin(unsigned int irq)
-{
- int bitmask;
- if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
- return;
-
- /* disable interrupt & release IRQ pin */
- bitmask = 1 << (irq - EXT_IRQ0);
- switch(irq) {
- case EXT_IRQ0:
- case EXT_IRQ1:
- case EXT_IRQ2:
- case EXT_IRQ3:
- *(volatile unsigned char *)IER &= ~bitmask;
- H8300_GPIO_FREE(H8300_GPIO_P8, bitmask);
- break ;
- case EXT_IRQ4:
- case EXT_IRQ5:
- *(volatile unsigned char *)IER &= ~bitmask;
- H8300_GPIO_FREE(H8300_GPIO_P9, bitmask);
- break;
- }
-}
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8300h/ptrace_h8300h.c
- * ptrace cpu depend helper functions
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <asm/ptrace.h>
-
-#define CCR_MASK 0x6f /* mode/imask not set */
-#define BREAKINST 0x5730 /* trapa #3 */
-
-/* Mapping from PT_xxx to the stack offset at which the register is
- saved. Notice that usp has no stack-slot and needs to be treated
- specially (see get_reg/put_reg below). */
-static const int h8300_register_offset[] = {
- PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
- PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0),
- PT_REG(ccr), PT_REG(pc)
-};
-
-/* read register */
-long h8300_get_reg(struct task_struct *task, int regno)
-{
- switch (regno) {
- case PT_USP:
- return task->thread.usp + sizeof(long)*2;
- case PT_CCR:
- return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- default:
- return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]);
- }
-}
-
-/* write register */
-int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
- unsigned short oldccr;
- switch (regno) {
- case PT_USP:
- task->thread.usp = data - sizeof(long)*2;
- case PT_CCR:
- oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- oldccr &= ~CCR_MASK;
- data &= CCR_MASK;
- data |= oldccr;
- *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- default:
- *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- }
- return 0;
-}
-
-/* disable singlestep */
-void user_disable_single_step(struct task_struct *child)
-{
- if((long)child->thread.breakinfo.addr != -1L) {
- *child->thread.breakinfo.addr = child->thread.breakinfo.inst;
- child->thread.breakinfo.addr = (unsigned short *)-1L;
- }
-}
-
-/* calculate next pc */
-enum jump_type {none, /* normal instruction */
- jabs, /* absolute address jump */
- ind, /* indirect address jump */
- ret, /* return to subrutine */
- reg, /* register indexed jump */
- relb, /* pc relative jump (byte offset) */
- relw, /* pc relative jump (word offset) */
- };
-
-/* opcode decode table define
- ptn: opcode pattern
- msk: opcode bitmask
- len: instruction length (<0 next table index)
- jmp: jump operation mode */
-struct optable {
- unsigned char bitpattern;
- unsigned char bitmask;
- signed char length;
- signed char type;
-} __attribute__((aligned(1),packed));
-
-#define OPTABLE(ptn,msk,len,jmp) \
- { \
- .bitpattern = ptn, \
- .bitmask = msk, \
- .length = len, \
- .type = jmp, \
- }
-
-static const struct optable optable_0[] = {
- OPTABLE(0x00,0xff, 1,none), /* 0x00 */
- OPTABLE(0x01,0xff,-1,none), /* 0x01 */
- OPTABLE(0x02,0xfe, 1,none), /* 0x02-0x03 */
- OPTABLE(0x04,0xee, 1,none), /* 0x04-0x05/0x14-0x15 */
- OPTABLE(0x06,0xfe, 1,none), /* 0x06-0x07 */
- OPTABLE(0x08,0xea, 1,none), /* 0x08-0x09/0x0c-0x0d/0x18-0x19/0x1c-0x1d */
- OPTABLE(0x0a,0xee, 1,none), /* 0x0a-0x0b/0x1a-0x1b */
- OPTABLE(0x0e,0xee, 1,none), /* 0x0e-0x0f/0x1e-0x1f */
- OPTABLE(0x10,0xfc, 1,none), /* 0x10-0x13 */
- OPTABLE(0x16,0xfe, 1,none), /* 0x16-0x17 */
- OPTABLE(0x20,0xe0, 1,none), /* 0x20-0x3f */
- OPTABLE(0x40,0xf0, 1,relb), /* 0x40-0x4f */
- OPTABLE(0x50,0xfc, 1,none), /* 0x50-0x53 */
- OPTABLE(0x54,0xfd, 1,ret ), /* 0x54/0x56 */
- OPTABLE(0x55,0xff, 1,relb), /* 0x55 */
- OPTABLE(0x57,0xff, 1,none), /* 0x57 */
- OPTABLE(0x58,0xfb, 2,relw), /* 0x58/0x5c */
- OPTABLE(0x59,0xfb, 1,reg ), /* 0x59/0x5b */
- OPTABLE(0x5a,0xfb, 2,jabs), /* 0x5a/0x5e */
- OPTABLE(0x5b,0xfb, 2,ind ), /* 0x5b/0x5f */
- OPTABLE(0x60,0xe8, 1,none), /* 0x60-0x67/0x70-0x77 */
- OPTABLE(0x68,0xfa, 1,none), /* 0x68-0x69/0x6c-0x6d */
- OPTABLE(0x6a,0xfe,-2,none), /* 0x6a-0x6b */
- OPTABLE(0x6e,0xfe, 2,none), /* 0x6e-0x6f */
- OPTABLE(0x78,0xff, 4,none), /* 0x78 */
- OPTABLE(0x79,0xff, 2,none), /* 0x79 */
- OPTABLE(0x7a,0xff, 3,none), /* 0x7a */
- OPTABLE(0x7b,0xff, 2,none), /* 0x7b */
- OPTABLE(0x7c,0xfc, 2,none), /* 0x7c-0x7f */
- OPTABLE(0x80,0x80, 1,none), /* 0x80-0xff */
-};
-
-static const struct optable optable_1[] = {
- OPTABLE(0x00,0xff,-3,none), /* 0x0100 */
- OPTABLE(0x40,0xf0,-3,none), /* 0x0140-0x14f */
- OPTABLE(0x80,0xf0, 1,none), /* 0x0180-0x018f */
- OPTABLE(0xc0,0xc0, 2,none), /* 0x01c0-0x01ff */
-};
-
-static const struct optable optable_2[] = {
- OPTABLE(0x00,0x20, 2,none), /* 0x6a0?/0x6a8?/0x6b0?/0x6b8? */
- OPTABLE(0x20,0x20, 3,none), /* 0x6a2?/0x6aa?/0x6b2?/0x6ba? */
-};
-
-static const struct optable optable_3[] = {
- OPTABLE(0x69,0xfb, 2,none), /* 0x010069/0x01006d/014069/0x01406d */
- OPTABLE(0x6b,0xff,-4,none), /* 0x01006b/0x01406b */
- OPTABLE(0x6f,0xff, 3,none), /* 0x01006f/0x01406f */
- OPTABLE(0x78,0xff, 5,none), /* 0x010078/0x014078 */
-};
-
-static const struct optable optable_4[] = {
- OPTABLE(0x00,0x78, 3,none), /* 0x0100690?/0x01006d0?/0140690/0x01406d0?/0x0100698?/0x01006d8?/0140698?/0x01406d8? */
- OPTABLE(0x20,0x78, 4,none), /* 0x0100692?/0x01006d2?/0140692/0x01406d2?/0x010069a?/0x01006da?/014069a?/0x01406da? */
-};
-
-static const struct optables_list {
- const struct optable *ptr;
- int size;
-} optables[] = {
-#define OPTABLES(no) \
- { \
- .ptr = optable_##no, \
- .size = sizeof(optable_##no) / sizeof(struct optable), \
- }
- OPTABLES(0),
- OPTABLES(1),
- OPTABLES(2),
- OPTABLES(3),
- OPTABLES(4),
-
-};
-
-const unsigned char condmask[] = {
- 0x00,0x40,0x01,0x04,0x02,0x08,0x10,0x20
-};
-
-static int isbranch(struct task_struct *task,int reson)
-{
- unsigned char cond = h8300_get_reg(task, PT_CCR);
- /* encode complex conditions */
- /* B4: N^V
- B5: Z|(N^V)
- B6: C|Z */
- __asm__("bld #3,%w0\n\t"
- "bxor #1,%w0\n\t"
- "bst #4,%w0\n\t"
- "bor #2,%w0\n\t"
- "bst #5,%w0\n\t"
- "bld #2,%w0\n\t"
- "bor #0,%w0\n\t"
- "bst #6,%w0\n\t"
- :"=&r"(cond)::"cc");
- cond &= condmask[reson >> 1];
- if (!(reson & 1))
- return cond == 0;
- else
- return cond != 0;
-}
-
-static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc)
-{
- const struct optable *op;
- unsigned char *fetch_p;
- unsigned char inst;
- unsigned long addr;
- unsigned long *sp;
- int op_len,regno;
- op = optables[0].ptr;
- op_len = optables[0].size;
- fetch_p = (unsigned char *)pc;
- inst = *fetch_p++;
- do {
- if ((inst & op->bitmask) == op->bitpattern) {
- if (op->length < 0) {
- op = optables[-op->length].ptr;
- op_len = optables[-op->length].size + 1;
- inst = *fetch_p++;
- } else {
- switch (op->type) {
- case none:
- return pc + op->length;
- case jabs:
- addr = *(unsigned long *)pc;
- return (unsigned short *)(addr & 0x00ffffff);
- case ind:
- addr = *pc & 0xff;
- return (unsigned short *)(*(unsigned long *)addr);
- case ret:
- sp = (unsigned long *)h8300_get_reg(child, PT_USP);
- /* user stack frames
- | er0 | temporary saved
- +--------+
- | exp | exception stack frames
- +--------+
- | ret pc | userspace return address
- */
- return (unsigned short *)(*(sp+2) & 0x00ffffff);
- case reg:
- regno = (*pc >> 4) & 0x07;
- if (regno == 0)
- addr = h8300_get_reg(child, PT_ER0);
- else
- addr = h8300_get_reg(child, regno-1+PT_ER1);
- return (unsigned short *)addr;
- case relb:
- if (inst == 0x55 || isbranch(child,inst & 0x0f))
- pc = (unsigned short *)((unsigned long)pc +
- ((signed char)(*fetch_p)));
- return pc+1; /* skip myself */
- case relw:
- if (inst == 0x5c || isbranch(child,(*fetch_p & 0xf0) >> 4))
- pc = (unsigned short *)((unsigned long)pc +
- ((signed short)(*(pc+1))));
- return pc+2; /* skip myself */
- }
- }
- } else
- op++;
- } while(--op_len > 0);
- return NULL;
-}
-
-/* Set breakpoint(s) to simulate a single step from the current PC. */
-
-void user_enable_single_step(struct task_struct *child)
-{
- unsigned short *nextpc;
- nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC));
- child->thread.breakinfo.addr = nextpc;
- child->thread.breakinfo.inst = *nextpc;
- *nextpc = BREAKINST;
-}
-
-asmlinkage void trace_trap(unsigned long bp)
-{
- if ((unsigned long)current->thread.breakinfo.addr == bp) {
- user_disable_single_step(current);
- force_sig(SIGTRAP,current);
- } else
- force_sig(SIGILL,current);
-}
-
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-# Reuse any files we can from the H8S
-#
-
-obj-y := ints_h8s.o ptrace_h8s.o
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_$(MODEL).o
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: EDOSK-2674
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
- ldc #0x00,exr
-
- /* Peripheral Setup */
- bclr #4,@INTCR:8 /* interrupt mode 2 */
- bset #5,@INTCR:8
- bclr #0,@IER+1:16
- bset #1,@ISCRL+1:16 /* IRQ0 Positive Edge */
- bclr #0,@ISCRL+1:16
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l er5,er6
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- ;; used,ddr
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x3f,0x3a
- ;; dummy
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; P7DDR
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; PADDR
- .byte 0xff,0xff
- ;; PBDDR
- .byte 0xff,0x00
- ;; PCDDR
- .byte 0xff,0x00
- ;; PDDDR
- .byte 0xff,0x00
- ;; PEDDR
- .byte 0xff,0x00
- ;; PFDDR
- .byte 0xff,0xff
- ;; PGDDR
- .byte 0x0f,0x0f
- ;; PHDDR
- .byte 0x0f,0x0f
-
-__target_name:
- .asciz "EDOSK-2674"
-
- .section .bootvec,"ax"
- jmp @__start
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: EDOSK-2674
- * Memory Layout : ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
- .section .text
- .file "crt0_rom.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #__ramend,sp
- ldc #0x80,ccr
- ldc #0,exr
-
- /* Peripheral Setup */
-;BSC/GPIO setup
- mov.l #init_regs,er0
- mov.w #0xffff,e2
-1:
- mov.w @er0+,r2
- beq 2f
- mov.w @er0+,r1
- mov.b r1l,@er2
- bra 1b
-
-2:
-;SDRAM setup
-#define SDRAM_SMR 0x400040
-
- mov.b #0,r0l
- mov.b r0l,@DRACCR:16
- mov.w #0x188,r0
- mov.w r0,@REFCR:16
- mov.w #0x85b4,r0
- mov.w r0,@DRAMCR:16
- mov.b #0,r1l
- mov.b r1l,@SDRAM_SMR
- mov.w #0x84b4,r0
- mov.w r0,@DRAMCR:16
-;special thanks to Arizona Cooperative Power
-
- /* copy .data */
- mov.l #__begin_data,er5
- mov.l #__sdata,er6
- mov.l #__edata,er4
- sub.l er6,er4
- shlr.l #2,er4
-1:
- mov.l @er5+,er0
- mov.l er0,@er6
- adds #4,er6
- dec.l #1,er4
- bne 1b
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr.l #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #__command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* linux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-#define INIT_REGS_DATA(REGS,DATA) \
- .word ((REGS) & 0xffff),DATA
-
-init_regs:
-INIT_REGS_DATA(ASTCR,0xff)
-INIT_REGS_DATA(RDNCR,0x00)
-INIT_REGS_DATA(ABWCR,0x80)
-INIT_REGS_DATA(WTCRAH,0x27)
-INIT_REGS_DATA(WTCRAL,0x77)
-INIT_REGS_DATA(WTCRBH,0x71)
-INIT_REGS_DATA(WTCRBL,0x22)
-INIT_REGS_DATA(CSACRH,0x80)
-INIT_REGS_DATA(CSACRL,0x80)
-INIT_REGS_DATA(BROMCRH,0xa0)
-INIT_REGS_DATA(BROMCRL,0xa0)
-INIT_REGS_DATA(P3DDR,0x3a)
-INIT_REGS_DATA(P3ODR,0x06)
-INIT_REGS_DATA(PADDR,0xff)
-INIT_REGS_DATA(PFDDR,0xfe)
-INIT_REGS_DATA(PGDDR,0x0f)
-INIT_REGS_DATA(PHDDR,0x0f)
-INIT_REGS_DATA(PFCR0,0xff)
-INIT_REGS_DATA(PFCR2,0x0d)
-INIT_REGS_DATA(ITSR, 0x00)
-INIT_REGS_DATA(ITSR+1,0x3f)
-INIT_REGS_DATA(INTCR,0x20)
-
- .word 0
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; P7DDR
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
- ;; PCDDR
- .byte 0x00,0x00
- ;; PDDDR
- .byte 0x00,0x00
- ;; PEDDR
- .byte 0x00,0x00
- ;; PFDDR
- .byte 0x00,0x00
- ;; PGDDR
- .byte 0x00,0x00
- ;; PHDDR
- .byte 0x00,0x00
-
- .section .rodata
-__target_name:
- .asciz "EDOSK-2674"
-
- .section .bss
-__command_line:
- .space 512
-
- /* interrupt vector */
- .section .vectors,"ax"
- .long __start
- .long __start
-vector = 2
- .rept 126
- .long _interrupt_redirect_table+vector*4
-vector = vector + 1
- .endr
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-extra-y = crt0_$(MODEL).o
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: generic
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
- ldc #0x00,exr
-
- /* Peripheral Setup */
- bclr #4,@INTCR:8 /* interrupt mode 2 */
- bset #5,@INTCR:8
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l er5,er6
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- ;; used,ddr
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; P7DDR
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
- ;; PCDDR
- .byte 0x00,0x00
- ;; PDDDR
- .byte 0x00,0x00
- ;; PEDDR
- .byte 0x00,0x00
- ;; PFDDR
- .byte 0x00,0x00
- ;; PGDDR
- .byte 0x00,0x00
- ;; PHDDR
- .byte 0x00,0x00
-
-__target_name:
- .asciz "generic"
-
- .section .bootvec,"ax"
- jmp @__start
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8s/generic/crt0_rom.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: generic
- * Memory Layout : ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
- .section .text
- .file "crt0_rom.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #__ramend,sp
- ldc #0x80,ccr
- ldc #0,exr
- bclr #4,@INTCR:8
- bset #5,@INTCR:8 /* Interrupt mode 2 */
-
- /* Peripheral Setup */
-
- /* copy .data */
-#if !defined(CONFIG_H8S_SIM)
- mov.l #__begin_data,er5
- mov.l #__sdata,er6
- mov.l #__edata,er4
- sub.l er6,er4
- shlr.l #2,er4
-1:
- mov.l @er5+,er0
- mov.l er0,@er6
- adds #4,er6
- dec.l #1,er4
- bne 1b
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr.l #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* linux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
- ;; PCDDR
- .byte 0x00,0x00
- ;; PDDDR
- .byte 0x00,0x00
- ;; PEDDR
- .byte 0x00,0x00
- ;; PFDDR
- .byte 0x00,0x00
- ;; PGDDR
- .byte 0x00,0x00
- ;; PHDDR
- .byte 0x00,0x00
-
- .section .rodata
-__target_name:
- .asciz "generic"
-
- .section .bss
-__command_line:
- .space 512
-
- /* interrupt vector */
- .section .vectors,"ax"
- .long __start
- .long __start
-vector = 2
- .rept 126-1
- .long _interrupt_redirect_table+vector*4
-vector = vector + 1
- .endr
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8s/ints_h8s.c
- * Interrupt handling CPU variants
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/gpio-internal.h>
-#include <asm/regs267x.h>
-
-/* saved vector list */
-const int __initconst h8300_saved_vectors[] = {
-#if defined(CONFIG_GDB_DEBUG)
- TRACE_VEC,
- TRAP3_VEC,
-#endif
- -1
-};
-
-/* trap entry table */
-const H8300_VECTOR __initconst h8300_trap_table[] = {
- 0,0,0,0,0,
- trace_break, /* TRACE */
- 0,0,
- system_call, /* TRAPA #0 */
- 0,0,0,0,0,0,0
-};
-
-/* IRQ pin assignment */
-struct irq_pins {
- unsigned char port_no;
- unsigned char bit_no;
-} __attribute__((aligned(1),packed));
-/* ISTR = 0 */
-static const struct irq_pins irq_assign_table0[16]={
- {H8300_GPIO_P5,H8300_GPIO_B0},{H8300_GPIO_P5,H8300_GPIO_B1},
- {H8300_GPIO_P5,H8300_GPIO_B2},{H8300_GPIO_P5,H8300_GPIO_B3},
- {H8300_GPIO_P5,H8300_GPIO_B4},{H8300_GPIO_P5,H8300_GPIO_B5},
- {H8300_GPIO_P5,H8300_GPIO_B6},{H8300_GPIO_P5,H8300_GPIO_B7},
- {H8300_GPIO_P6,H8300_GPIO_B0},{H8300_GPIO_P6,H8300_GPIO_B1},
- {H8300_GPIO_P6,H8300_GPIO_B2},{H8300_GPIO_P6,H8300_GPIO_B3},
- {H8300_GPIO_P6,H8300_GPIO_B4},{H8300_GPIO_P6,H8300_GPIO_B5},
- {H8300_GPIO_PF,H8300_GPIO_B1},{H8300_GPIO_PF,H8300_GPIO_B2},
-};
-/* ISTR = 1 */
-static const struct irq_pins irq_assign_table1[16]={
- {H8300_GPIO_P8,H8300_GPIO_B0},{H8300_GPIO_P8,H8300_GPIO_B1},
- {H8300_GPIO_P8,H8300_GPIO_B2},{H8300_GPIO_P8,H8300_GPIO_B3},
- {H8300_GPIO_P8,H8300_GPIO_B4},{H8300_GPIO_P8,H8300_GPIO_B5},
- {H8300_GPIO_PH,H8300_GPIO_B2},{H8300_GPIO_PH,H8300_GPIO_B3},
- {H8300_GPIO_P2,H8300_GPIO_B0},{H8300_GPIO_P2,H8300_GPIO_B1},
- {H8300_GPIO_P2,H8300_GPIO_B2},{H8300_GPIO_P2,H8300_GPIO_B3},
- {H8300_GPIO_P2,H8300_GPIO_B4},{H8300_GPIO_P2,H8300_GPIO_B5},
- {H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7},
-};
-
-/* IRQ to GPIO pin translation */
-#define IRQ_GPIO_MAP(irqbit,irq,port,bit) \
-do { \
- if (*(volatile unsigned short *)ITSR & irqbit) { \
- port = irq_assign_table1[irq - EXT_IRQ0].port_no; \
- bit = irq_assign_table1[irq - EXT_IRQ0].bit_no; \
- } else { \
- port = irq_assign_table0[irq - EXT_IRQ0].port_no; \
- bit = irq_assign_table0[irq - EXT_IRQ0].bit_no; \
- } \
-} while(0)
-
-int h8300_enable_irq_pin(unsigned int irq)
-{
- if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
- unsigned short ptn = 1 << (irq - EXT_IRQ0);
- unsigned int port_no,bit_no;
- IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
- if (H8300_GPIO_RESERVE(port_no, bit_no) == 0)
- return -EBUSY; /* pin already use */
- H8300_GPIO_DDR(port_no, bit_no, H8300_GPIO_INPUT);
- *(volatile unsigned short *)ISR &= ~ptn; /* ISR clear */
- }
-
- return 0;
-}
-
-void h8300_disable_irq_pin(unsigned int irq)
-{
- if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
- /* disable interrupt & release IRQ pin */
- unsigned short ptn = 1 << (irq - EXT_IRQ0);
- unsigned short port_no,bit_no;
- *(volatile unsigned short *)ISR &= ~ptn;
- *(volatile unsigned short *)IER &= ~ptn;
- IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
- H8300_GPIO_FREE(port_no, bit_no);
- }
-}
+++ /dev/null
-/*
- * linux/arch/h8300/platform/h8s/ptrace_h8s.c
- * ptrace cpu depend helper functions
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-
-#define CCR_MASK 0x6f
-#define EXR_TRACE 0x80
-
-/* Mapping from PT_xxx to the stack offset at which the register is
- saved. Notice that usp has no stack-slot and needs to be treated
- specially (see get_reg/put_reg below). */
-static const int h8300_register_offset[] = {
- PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
- PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0),
- PT_REG(ccr), PT_REG(pc), 0, PT_REG(exr)
-};
-
-/* read register */
-long h8300_get_reg(struct task_struct *task, int regno)
-{
- switch (regno) {
- case PT_USP:
- return task->thread.usp + sizeof(long)*2 + 2;
- case PT_CCR:
- case PT_EXR:
- return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- default:
- return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]);
- }
-}
-
-/* write register */
-int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
- unsigned short oldccr;
- switch (regno) {
- case PT_USP:
- task->thread.usp = data - sizeof(long)*2 - 2;
- case PT_CCR:
- oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- oldccr &= ~CCR_MASK;
- data &= CCR_MASK;
- data |= oldccr;
- *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- case PT_EXR:
- /* exr modify not support */
- return -EIO;
- default:
- *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- }
- return 0;
-}
-
-/* disable singlestep */
-void user_disable_single_step(struct task_struct *child)
-{
- *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE;
-}
-
-/* enable singlestep */
-void user_enable_single_step(struct task_struct *child)
-{
- *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE;
-}
-
-asmlinkage void trace_trap(unsigned long bp)
-{
- (void)bp;
- force_sig(SIGTRAP,current);
-}
-
Say Y here if you want to support the Yellowstone RapIDE controller
manufactured for use with Acorn computers.
-config IDE_H8300
- tristate "H8300 IDE support"
- depends on H8300
- default y
- help
- Enables the H8300 IDE driver.
-
config BLK_DEV_GAYLE
tristate "Amiga Gayle IDE interface support"
depends on AMIGA
obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o
-obj-$(CONFIG_IDE_H8300) += ide-h8300.o
-
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
+++ /dev/null
-/*
- * H8/300 generic IDE interface
- */
-
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define DRV_NAME "ide-h8300"
-
-#define bswap(d) \
-({ \
- u16 r; \
- __asm__("mov.b %w1,r1h\n\t" \
- "mov.b %x1,r1l\n\t" \
- "mov.w r1,%0" \
- :"=r"(r) \
- :"r"(d) \
- :"er1"); \
- (r); \
-})
-
-static void mm_outsw(unsigned long addr, void *buf, u32 len)
-{
- unsigned short *bp = (unsigned short *)buf;
- for (; len > 0; len--, bp++)
- *(volatile u16 *)addr = bswap(*bp);
-}
-
-static void mm_insw(unsigned long addr, void *buf, u32 len)
-{
- unsigned short *bp = (unsigned short *)buf;
- for (; len > 0; len--, bp++)
- *bp = bswap(*(volatile u16 *)addr);
-}
-
-static void h8300_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
-}
-
-static void h8300_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
-}
-
-static const struct ide_tp_ops h8300_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = h8300_input_data,
- .output_data = h8300_output_data,
-};
-
-#define H8300_IDE_GAP (2)
-
-static inline void hw_setup(struct ide_hw *hw)
-{
- int i;
-
- memset(hw, 0, sizeof(*hw));
- for (i = 0; i <= 7; i++)
- hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i;
- hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT;
- hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ;
-}
-
-static const struct ide_port_info h8300_port_info = {
- .tp_ops = &h8300_tp_ops,
- .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
- .chipset = ide_generic,
-};
-
-static int __init h8300_ide_init(void)
-{
- struct ide_hw hw, *hws[] = { &hw };
-
- printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
-
- if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300"))
- goto out_busy;
- if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) {
- release_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8);
- goto out_busy;
- }
-
- hw_setup(&hw);
-
- return ide_host_add(&h8300_port_info, hws, 1, NULL);
-
-out_busy:
- printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
-
- return -EBUSY;
-}
-
-module_init(h8300_ide_init);
-
-MODULE_LICENSE("GPL");
#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
-#if defined(CONFIG_NE2000) || \
- defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
+#if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
#endif
#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
-config NE_H8300
- tristate "NE2000 compatible support for H8/300"
- depends on H8300H_AKI3068NET || H8300H_H8MAX
- ---help---
- Say Y here if you want to use the NE2000 compatible
- controller on the Renesas H8/300 processor.
-
config STNIC
tristate "National DP83902AV support"
depends on SUPERH
obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
obj-$(CONFIG_STNIC) += stnic.o 8390.o
+++ /dev/null
-/* ne-h8300.c: A NE2000 clone on H8/300 driver for linux. */
-/*
- original ne.c
- Written 1992-94 by Donald Becker.
-
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
-
- H8/300 modified
- Yoshinori Sato <ysato@users.sourceforge.jp>
-*/
-
-static const char version1[] =
-"ne-h8300.c:v1.00 2004/04/11 ysato\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/jiffies.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define EI_SHIFT(x) (ei_local->reg_offset[x])
-
-#include "8390.h"
-
-#define DRV_NAME "ne-h8300"
-
-/* Some defines that people can play with if so inclined. */
-
-/* Do we perform extra sanity checks on stuff ? */
-/* #define NE_SANITY_CHECK */
-
-/* Do we implement the read before write bugfix ? */
-/* #define NE_RW_BUGFIX */
-
-/* Do we have a non std. amount of memory? (in units of 256 byte pages) */
-/* #define PACKETBUF_MEMSIZE 0x40 */
-
-/* A zero-terminated list of I/O addresses to be probed at boot. */
-
-/* ---- No user-serviceable parts below ---- */
-
-static const char version[] =
- "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-#include "lib8390.c"
-
-#define NE_BASE (dev->base_addr)
-#define NE_CMD 0x00
-#define NE_DATAPORT (ei_status.word16?0x20:0x10) /* NatSemi-defined port window offset. */
-#define NE_RESET (ei_status.word16?0x3f:0x1f) /* Issue a read to reset, a write to clear. */
-#define NE_IO_EXTENT (ei_status.word16?0x40:0x20)
-
-#define NESM_START_PG 0x40 /* First page of TX buffer */
-#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-static int ne_probe1(struct net_device *dev, int ioaddr);
-
-static int ne_open(struct net_device *dev);
-static int ne_close(struct net_device *dev);
-
-static void ne_reset_8390(struct net_device *dev);
-static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void ne_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void ne_block_output(struct net_device *dev, const int count,
- const unsigned char *buf, const int start_page);
-
-
-static u32 reg_offset[16];
-
-static int __init init_reg_offset(struct net_device *dev,unsigned long base_addr)
-{
- struct ei_device *ei_local = netdev_priv(dev);
- int i;
- unsigned char bus_width;
-
- bus_width = *(volatile unsigned char *)ABWCR;
- bus_width &= 1 << ((base_addr >> 21) & 7);
-
- for (i = 0; i < ARRAY_SIZE(reg_offset); i++)
- if (bus_width == 0)
- reg_offset[i] = i * 2 + 1;
- else
- reg_offset[i] = i;
-
- ei_local->reg_offset = reg_offset;
- return 0;
-}
-
-static int __initdata h8300_ne_count = 0;
-#ifdef CONFIG_H8300H_H8MAX
-static unsigned long __initdata h8300_ne_base[] = { 0x800600 };
-static int h8300_ne_irq[] = {EXT_IRQ4};
-#endif
-#ifdef CONFIG_H8300H_AKI3068NET
-static unsigned long __initdata h8300_ne_base[] = { 0x200000 };
-static int h8300_ne_irq[] = {EXT_IRQ5};
-#endif
-
-static inline int init_dev(struct net_device *dev)
-{
- if (h8300_ne_count < ARRAY_SIZE(h8300_ne_base)) {
- dev->base_addr = h8300_ne_base[h8300_ne_count];
- dev->irq = h8300_ne_irq[h8300_ne_count];
- h8300_ne_count++;
- return 0;
- } else
- return -ENODEV;
-}
-
-/* Probe for various non-shared-memory ethercards.
-
- NEx000-clone boards have a Station Address PROM (SAPROM) in the packet
- buffer memory space. NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of
- the SAPROM, while other supposed NE2000 clones must be detected by their
- SA prefix.
-
- Reading the SAPROM from a word-wide card with the 8390 set in byte-wide
- mode results in doubled values, which can be detected and compensated for.
-
- The probe is also responsible for initializing the card and filling
- in the 'dev' and 'ei_status' structures.
-
- We use the minimum memory size for some ethercard product lines, iff we can't
- distinguish models. You can increase the packet buffer size by setting
- PACKETBUF_MEMSIZE. Reported Cabletron packet buffer locations are:
- E1010 starts at 0x100 and ends at 0x2000.
- E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory")
- E2010 starts at 0x100 and ends at 0x4000.
- E2010-x starts at 0x100 and ends at 0xffff. */
-
-static int __init do_ne_probe(struct net_device *dev)
-{
- unsigned int base_addr = dev->base_addr;
-
- /* First check any supplied i/o locations. User knows best. <cough> */
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return ne_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- return -ENODEV;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
- free_irq(dev->irq, dev);
- release_region(dev->base_addr, NE_IO_EXTENT);
-}
-
-#ifndef MODULE
-struct net_device * __init ne_probe(int unit)
-{
- struct net_device *dev = ____alloc_ei_netdev(0);
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (init_dev(dev))
- return ERR_PTR(-ENODEV);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = init_reg_offset(dev, dev->base_addr);
- if (err)
- goto out;
-
- err = do_ne_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops ne_netdev_ops = {
- .ndo_open = ne_open,
- .ndo_stop = ne_close,
-
- .ndo_start_xmit = __ei_start_xmit,
- .ndo_tx_timeout = __ei_tx_timeout,
- .ndo_get_stats = __ei_get_stats,
- .ndo_set_rx_mode = __ei_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = __ei_poll,
-#endif
-};
-
-static int __init ne_probe1(struct net_device *dev, int ioaddr)
-{
- int i;
- unsigned char SA_prom[16];
- int wordlength = 2;
- const char *name = NULL;
- int start_page, stop_page;
- int reg0, ret;
- static unsigned version_printed;
- struct ei_device *ei_local = netdev_priv(dev);
- unsigned char bus_width;
-
- if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- reg0 = inb_p(ioaddr);
- if (reg0 == 0xFF) {
- ret = -ENODEV;
- goto err_out;
- }
-
- /* Do a preliminary verification that we have a 8390. */
- {
- int regd;
- outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
- regd = inb_p(ioaddr + EI_SHIFT(0x0d));
- outb_p(0xff, ioaddr + EI_SHIFT(0x0d));
- outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
- inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
- if (inb_p(ioaddr + EN0_COUNTER0) != 0) {
- outb_p(reg0, ioaddr + EI_SHIFT(0));
- outb_p(regd, ioaddr + EI_SHIFT(0x0d)); /* Restore the old values. */
- ret = -ENODEV;
- goto err_out;
- }
- }
-
- if (ei_debug && version_printed++ == 0)
- printk(KERN_INFO "%s", version1);
-
- printk(KERN_INFO "NE*000 ethercard probe at %08x:", ioaddr);
-
- /* Read the 16 bytes of station address PROM.
- We must first initialize registers, similar to NS8390_init(eifdev, 0).
- We can't reliably read the SAPROM address without this.
- (I learned the hard way!). */
- {
- struct {unsigned char value, offset; } program_seq[] =
- {
- {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
- {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
- {0x00, EN0_RCNTLO}, /* Clear the count regs. */
- {0x00, EN0_RCNTHI},
- {0x00, EN0_IMR}, /* Mask completion irq. */
- {0xFF, EN0_ISR},
- {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
- {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
- {32, EN0_RCNTLO},
- {0x00, EN0_RCNTHI},
- {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
- {0x00, EN0_RSARHI},
- {E8390_RREAD+E8390_START, E8390_CMD},
- };
-
- for (i = 0; i < ARRAY_SIZE(program_seq); i++)
- outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
-
- }
- bus_width = *(volatile unsigned char *)ABWCR;
- bus_width &= 1 << ((ioaddr >> 21) & 7);
- ei_status.word16 = (bus_width == 0); /* temporary setting */
- for(i = 0; i < 16 /*sizeof(SA_prom)*/; i++) {
- SA_prom[i] = inb_p(ioaddr + NE_DATAPORT);
- inb_p(ioaddr + NE_DATAPORT); /* dummy read */
- }
-
- start_page = NESM_START_PG;
- stop_page = NESM_STOP_PG;
-
- if (bus_width)
- wordlength = 1;
- else
- outb_p(0x49, ioaddr + EN0_DCFG);
-
- /* Set up the rest of the parameters. */
- name = (wordlength == 2) ? "NE2000" : "NE1000";
-
- if (! dev->irq) {
- printk(" failed to detect IRQ line.\n");
- ret = -EAGAIN;
- goto err_out;
- }
-
- /* Snarf the interrupt now. There's no point in waiting since we cannot
- share and the board will usually be enabled. */
- ret = request_irq(dev->irq, __ei_interrupt, 0, name, dev);
- if (ret) {
- printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret);
- goto err_out;
- }
-
- dev->base_addr = ioaddr;
-
- for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = SA_prom[i];
- printk(" %pM\n", dev->dev_addr);
-
- printk("%s: %s found at %#x, using IRQ %d.\n",
- dev->name, name, ioaddr, dev->irq);
-
- ei_status.name = name;
- ei_status.tx_start_page = start_page;
- ei_status.stop_page = stop_page;
- ei_status.word16 = (wordlength == 2);
-
- ei_status.rx_start_page = start_page + TX_PAGES;
-#ifdef PACKETBUF_MEMSIZE
- /* Allow the packet buffer size to be overridden by know-it-alls. */
- ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
-#endif
-
- ei_status.reset_8390 = &ne_reset_8390;
- ei_status.block_input = &ne_block_input;
- ei_status.block_output = &ne_block_output;
- ei_status.get_8390_hdr = &ne_get_8390_hdr;
- ei_status.priv = 0;
-
- dev->netdev_ops = &ne_netdev_ops;
-
- __NS8390_init(dev, 0);
-
- ret = register_netdev(dev);
- if (ret)
- goto out_irq;
- return 0;
-out_irq:
- free_irq(dev->irq, dev);
-err_out:
- release_region(ioaddr, NE_IO_EXTENT);
- return ret;
-}
-
-static int ne_open(struct net_device *dev)
-{
- __ei_open(dev);
- return 0;
-}
-
-static int ne_close(struct net_device *dev)
-{
- if (ei_debug > 1)
- printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
- __ei_close(dev);
- return 0;
-}
-
-/* Hard reset the card. This used to pause for the same period that a
- 8390 reset command required, but that shouldn't be necessary. */
-
-static void ne_reset_8390(struct net_device *dev)
-{
- unsigned long reset_start_time = jiffies;
- struct ei_device *ei_local = netdev_priv(dev);
-
- if (ei_debug > 1)
- printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
-
- /* DON'T change these to inb_p/outb_p or reset will fail on clones. */
- outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
-
- ei_status.txing = 0;
- ei_status.dmaing = 0;
-
- /* This check _should_not_ be necessary, omit eventually. */
- while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
- printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
- break;
- }
- outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */
-}
-
-/* Grab the 8390 specific header. Similar to the block_input routine, but
- we don't need to be concerned with ring wrap as the header will be at
- the start of a page, so we optimize accordingly. */
-
-static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- struct ei_device *ei_local = netdev_priv(dev);
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
-
- if (ei_status.dmaing)
- {
- printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr "
- "[DMAstat:%d][irqlock:%d].\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
- return;
- }
-
- ei_status.dmaing |= 0x01;
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD);
- outb_p(sizeof(struct e8390_pkt_hdr), NE_BASE + EN0_RCNTLO);
- outb_p(0, NE_BASE + EN0_RCNTHI);
- outb_p(0, NE_BASE + EN0_RSARLO); /* On page boundary */
- outb_p(ring_page, NE_BASE + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
-
- if (ei_status.word16) {
- int len;
- unsigned short *p = (unsigned short *)hdr;
- for (len = sizeof(struct e8390_pkt_hdr)>>1; len > 0; len--)
- *p++ = inw(NE_BASE + NE_DATAPORT);
- } else
- insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
-
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-
- le16_to_cpus(&hdr->count);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you
- are porting to a new ethercard, look at the packet driver source for hints.
- The NEx000 doesn't share the on-board packet memory -- you have to put
- the packet out through the "remote DMA" dataport using outb. */
-
-static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-#ifdef NE_SANITY_CHECK
- int xfer_count = count;
-#endif
- char *buf = skb->data;
-
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
- if (ei_status.dmaing)
- {
- printk(KERN_EMERG "%s: DMAing conflict in ne_block_input "
- "[DMAstat:%d][irqlock:%d].\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD);
- outb_p(count & 0xff, NE_BASE + EN0_RCNTLO);
- outb_p(count >> 8, NE_BASE + EN0_RCNTHI);
- outb_p(ring_offset & 0xff, NE_BASE + EN0_RSARLO);
- outb_p(ring_offset >> 8, NE_BASE + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
- if (ei_status.word16)
- {
- int len;
- unsigned short *p = (unsigned short *)buf;
- for (len = count>>1; len > 0; len--)
- *p++ = inw(NE_BASE + NE_DATAPORT);
- if (count & 0x01)
- {
- buf[count-1] = inb(NE_BASE + NE_DATAPORT);
-#ifdef NE_SANITY_CHECK
- xfer_count++;
-#endif
- }
- } else {
- insb(NE_BASE + NE_DATAPORT, buf, count);
- }
-
-#ifdef NE_SANITY_CHECK
- /* This was for the ALPHA version only, but enough people have
- been encountering problems so it is still here. If you see
- this message you either 1) have a slightly incompatible clone
- or 2) have noise/speed problems with your bus. */
-
- if (ei_debug > 1)
- {
- /* DMA termination address check... */
- int addr, tries = 20;
- do {
- /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
- -- it's broken for Rx on some cards! */
- int high = inb_p(NE_BASE + EN0_RSARHI);
- int low = inb_p(NE_BASE + EN0_RSARLO);
- addr = (high << 8) + low;
- if (((ring_offset + xfer_count) & 0xff) == low)
- break;
- } while (--tries > 0);
- if (tries <= 0)
- printk(KERN_WARNING "%s: RX transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, ring_offset + xfer_count, addr);
- }
-#endif
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-}
-
-static void ne_block_output(struct net_device *dev, int count,
- const unsigned char *buf, const int start_page)
-{
- struct ei_device *ei_local = netdev_priv(dev);
- unsigned long dma_start;
-#ifdef NE_SANITY_CHECK
- int retries = 0;
-#endif
-
- /* Round the count up for word writes. Do we need to do this?
- What effect will an odd byte count have on the 8390?
- I should check someday. */
-
- if (ei_status.word16 && (count & 0x01))
- count++;
-
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
- if (ei_status.dmaing)
- {
- printk(KERN_EMERG "%s: DMAing conflict in ne_block_output."
- "[DMAstat:%d][irqlock:%d]\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- /* We should already be in page 0, but to be safe... */
- outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, NE_BASE + NE_CMD);
-
-#ifdef NE_SANITY_CHECK
-retry:
-#endif
-
-#ifdef NE8390_RW_BUGFIX
- /* Handle the read-before-write bug the same way as the
- Crynwr packet driver -- the NatSemi method doesn't work.
- Actually this doesn't always work either, but if you have
- problems with your NEx000 this is better than nothing! */
-
- outb_p(0x42, NE_BASE + EN0_RCNTLO);
- outb_p(0x00, NE_BASE + EN0_RCNTHI);
- outb_p(0x42, NE_BASE + EN0_RSARLO);
- outb_p(0x00, NE_BASE + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
- /* Make certain that the dummy read has occurred. */
- udelay(6);
-#endif
-
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR);
-
- /* Now the normal output. */
- outb_p(count & 0xff, NE_BASE + EN0_RCNTLO);
- outb_p(count >> 8, NE_BASE + EN0_RCNTHI);
- outb_p(0x00, NE_BASE + EN0_RSARLO);
- outb_p(start_page, NE_BASE + EN0_RSARHI);
-
- outb_p(E8390_RWRITE+E8390_START, NE_BASE + NE_CMD);
- if (ei_status.word16) {
- int len;
- unsigned short *p = (unsigned short *)buf;
- for (len = count>>1; len > 0; len--)
- outw(*p++, NE_BASE + NE_DATAPORT);
- } else {
- outsb(NE_BASE + NE_DATAPORT, buf, count);
- }
-
- dma_start = jiffies;
-
-#ifdef NE_SANITY_CHECK
- /* This was for the ALPHA version only, but enough people have
- been encountering problems so it is still here. */
-
- if (ei_debug > 1)
- {
- /* DMA termination address check... */
- int addr, tries = 20;
- do {
- int high = inb_p(NE_BASE + EN0_RSARHI);
- int low = inb_p(NE_BASE + EN0_RSARLO);
- addr = (high << 8) + low;
- if ((start_page << 8) + count == addr)
- break;
- } while (--tries > 0);
-
- if (tries <= 0)
- {
- printk(KERN_WARNING "%s: Tx packet transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, (start_page << 8) + count, addr);
- if (retries++ == 0)
- goto retry;
- }
- }
-#endif
-
- while ((inb_p(NE_BASE + EN0_ISR) & ENISR_RDC) == 0)
- if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
- printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
- ne_reset_8390(dev);
- __NS8390_init(dev,1);
- break;
- }
-
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-}
-
-
-#ifdef MODULE
-#define MAX_NE_CARDS 1 /* Max number of NE cards per module */
-static struct net_device *dev_ne[MAX_NE_CARDS];
-static int io[MAX_NE_CARDS];
-static int irq[MAX_NE_CARDS];
-static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(bad, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s)");
-MODULE_DESCRIPTION("H8/300 NE2000 Ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that no ISA autoprobe takes place. We can't guarantee
-that the ne2k probe is the last 8390 based probe to take place (as it
-is at boot) and so the probe will get confused by any other 8390 cards.
-ISA device autoprobes on a running machine are not recommended anyway. */
-
-int init_module(void)
-{
- int this_dev, found = 0;
- int err;
-
- for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
- struct net_device *dev = ____alloc_ei_netdev(0);
- if (!dev)
- break;
- if (io[this_dev]) {
- dev->irq = irq[this_dev];
- dev->mem_end = bad[this_dev];
- dev->base_addr = io[this_dev];
- } else {
- dev->base_addr = h8300_ne_base[this_dev];
- dev->irq = h8300_ne_irq[this_dev];
- }
- err = init_reg_offset(dev, dev->base_addr);
- if (!err) {
- if (do_ne_probe(dev) == 0) {
- dev_ne[found++] = dev;
- continue;
- }
- }
- free_netdev(dev);
- if (found)
- break;
- if (io[this_dev] != 0)
- printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", dev->base_addr);
- else
- printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n");
- return -ENXIO;
- }
- if (found)
- return 0;
- return -ENODEV;
-}
-
-void cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
- struct net_device *dev = dev_ne[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
#define USE_32_BIT 1
#endif
-#if defined(__H8300H__) || defined(__H8300S__)
-#define NO_AUTOPROBE
-#undef insl
-#undef outsl
-#define insl(a,b,l) io_insl_noswap(a,b,l)
-#define outsl(a,b,l) io_outsl_noswap(a,b,l)
-#endif
-
/*
.the SMC9194 can be at any of the following port addresses. To change,
.for a slightly different card, you can add it to the array. Keep in
unsigned int irq;
};
-#if defined(CONFIG_H8S_EDOSK2674)
-static struct devlist smc_devlist[] __initdata = {
- {.port = 0xf80000, .irq = 16},
- {.port = 0, .irq = 0 },
-};
-#else
static struct devlist smc_devlist[] __initdata = {
{.port = 0x200, .irq = 0},
{.port = 0x220, .irq = 0},
{.port = 0x3E0, .irq = 0},
{.port = 0, .irq = 0},
};
-#endif
/*
. Wait time for memory to be free. This probably shouldn't be
. tuned that much, as waiting for this means nothing else happens
#ifdef USE_32_BIT
if ( length & 0x2 ) {
outsl(ioaddr + DATA_1, buf, length >> 2 );
-#if !defined(__H8300H__) && !defined(__H8300S__)
outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#else
- ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#endif
}
else
outsl(ioaddr + DATA_1, buf, length >> 2 );
retval = -ENODEV;
goto err_out;
}
-#if !defined(CONFIG_H8S_EDOSK2674)
/* well, we've already written once, so hopefully another time won't
hurt. This time, I need to switch the bank register to bank 1,
so I can access the base address register */
retval = -ENODEV;
goto err_out;
}
-#else
- (void)base_address_register; /* Warning suppression */
-#endif
-
/* check if the revision register is something that I recognize.
These might need to be added to later, as future revisions
tristate "PC-style hardware"
depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \
(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && \
- !XTENSA && !CRIS && !H8300
+ !XTENSA && !CRIS
---help---
You should say Y here if you have a PC-style parallel port. All
# FRV Architecture
-# H8300 Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
# FRV Architecture
-# H8300 Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on H8300 || M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
#include <linux/sh_dma.h>
/*
- * Generic header for SuperH (H)SCI(F) (used by sh/sh64/h8300 and related parts)
+ * Generic header for SuperH (H)SCI(F) (used by sh/sh64 and related parts)
*/
#define SCIx_NOT_SUPPORTED (-1)
#define AUDIT_ARCH_ARMEB (EM_ARM)
#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_FRV (EM_FRV)
-#define AUDIT_ARCH_H8300 (EM_H8_300)
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_M32R (EM_M32R)
#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
#define EM_V850 87 /* NEC v850 */
#define EM_M32R 88 /* Renesas M32R */
-#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */
#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */
#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
#define EM_TI_C6000 140 /* TI C6X DSPs */
ARCH = frv
GCC_VER = 4.5.1
-# h8300 - failed make defconfig??
-TEST_START IF ${RUN} == h8300 || ${DO_FAILED}
-CROSS = h8300-elf
-ARCH = h8300
-GCC_VER = 4.5.1
-
# m68k fails with error?
TEST_START IF ${RUN} == m68k || ${DO_DEFAULT}
CROSS = m68k-linux
projects / cascardo / linux.git / commitdiff