return (c1 - c2);
}
+#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat
+ *
+ * PARAMETERS: Adds a "DestSize" parameter to each of the standard string
+ * functions. This is the size of the Destination buffer.
+ *
+ * RETURN: TRUE if the operation would overflow the destination buffer.
+ *
+ * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that
+ * the result of the operation will not overflow the output string
+ * buffer.
+ *
+ * NOTE: These functions are typically only helpful for processing
+ * user input and command lines. For most ACPICA code, the
+ * required buffer length is precisely calculated before buffer
+ * allocation, so the use of these functions is unnecessary.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source)
+{
+
+ if (strlen(source) >= dest_size) {
+ return (TRUE);
+ }
+
+ strcpy(dest, source);
+ return (FALSE);
+}
+
+u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source)
+{
+
+ if ((strlen(dest) + strlen(source)) >= dest_size) {
+ return (TRUE);
+ }
+
+ strcat(dest, source);
+ return (FALSE);
+}
+
+u8
+acpi_ut_safe_strncat(char *dest,
+ acpi_size dest_size,
+ char *source, acpi_size max_transfer_length)
+{
+ acpi_size actual_transfer_length;
+
+ actual_transfer_length = ACPI_MIN(max_transfer_length, strlen(source));
+
+ if ((strlen(dest) + actual_transfer_length) >= dest_size) {
+ return (TRUE);
+ }
+
+ strncat(dest, source, max_transfer_length);
+ return (FALSE);
+}
+#endif
+
/*******************************************************************************
*
* FUNCTION: acpi_ut_strtoul64
* 32-bit or 64-bit conversion, depending on the current mode
* of the interpreter.
*
- * NOTE: Does not support Octal strings, not needed.
+ * NOTES: acpi_gbl_integer_byte_width should be set to the proper width.
+ * For the core ACPICA code, this width depends on the DSDT
+ * version. For iASL, the default byte width is always 8.
+ *
+ * Does not support Octal strings, not needed at this time.
+ *
+ * There is an earlier version of the function after this one,
+ * below. It is slightly different than this one, and the two
+ * may eventually may need to be merged. (01/2016).
*
******************************************************************************/
}
}
-#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION)
+#ifdef _OBSOLETE_FUNCTIONS
+/* TBD: use version in ACPICA main code base? */
+/* DONE: 01/2016 */
+
/*******************************************************************************
*
- * FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat
+ * FUNCTION: strtoul64
*
- * PARAMETERS: Adds a "DestSize" parameter to each of the standard string
- * functions. This is the size of the Destination buffer.
+ * PARAMETERS: string - Null terminated string
+ * terminater - Where a pointer to the terminating byte
+ * is returned
+ * base - Radix of the string
*
- * RETURN: TRUE if the operation would overflow the destination buffer.
+ * RETURN: Converted value
*
- * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that
- * the result of the operation will not overflow the output string
- * buffer.
- *
- * NOTE: These functions are typically only helpful for processing
- * user input and command lines. For most ACPICA code, the
- * required buffer length is precisely calculated before buffer
- * allocation, so the use of these functions is unnecessary.
+ * DESCRIPTION: Convert a string into an unsigned value.
*
******************************************************************************/
-u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source)
+acpi_status strtoul64(char *string, u32 base, u64 *ret_integer)
{
+ u32 index;
+ u32 sign;
+ u64 return_value = 0;
+ acpi_status status = AE_OK;
- if (strlen(source) >= dest_size) {
- return (TRUE);
+ *ret_integer = 0;
+
+ switch (base) {
+ case 0:
+ case 8:
+ case 10:
+ case 16:
+
+ break;
+
+ default:
+ /*
+ * The specified Base parameter is not in the domain of
+ * this function:
+ */
+ return (AE_BAD_PARAMETER);
}
- strcpy(dest, source);
- return (FALSE);
-}
+ /* Skip over any white space in the buffer: */
-u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source)
-{
+ while (isspace((int)*string) || *string == '\t') {
+ ++string;
+ }
- if ((strlen(dest) + strlen(source)) >= dest_size) {
- return (TRUE);
+ /*
+ * The buffer may contain an optional plus or minus sign.
+ * If it does, then skip over it but remember what is was:
+ */
+ if (*string == '-') {
+ sign = ACPI_SIGN_NEGATIVE;
+ ++string;
+ } else if (*string == '+') {
+ ++string;
+ sign = ACPI_SIGN_POSITIVE;
+ } else {
+ sign = ACPI_SIGN_POSITIVE;
}
- strcat(dest, source);
- return (FALSE);
-}
+ /*
+ * If the input parameter Base is zero, then we need to
+ * determine if it is octal, decimal, or hexadecimal:
+ */
+ if (base == 0) {
+ if (*string == '0') {
+ if (tolower((int)*(++string)) == 'x') {
+ base = 16;
+ ++string;
+ } else {
+ base = 8;
+ }
+ } else {
+ base = 10;
+ }
+ }
-u8
-acpi_ut_safe_strncat(char *dest,
- acpi_size dest_size,
- char *source, acpi_size max_transfer_length)
-{
- acpi_size actual_transfer_length;
+ /*
+ * For octal and hexadecimal bases, skip over the leading
+ * 0 or 0x, if they are present.
+ */
+ if (base == 8 && *string == '0') {
+ string++;
+ }
- actual_transfer_length = ACPI_MIN(max_transfer_length, strlen(source));
+ if (base == 16 && *string == '0' && tolower((int)*(++string)) == 'x') {
+ string++;
+ }
- if ((strlen(dest) + actual_transfer_length) >= dest_size) {
- return (TRUE);
+ /* Main loop: convert the string to an unsigned long */
+
+ while (*string) {
+ if (isdigit((int)*string)) {
+ index = ((u8)*string) - '0';
+ } else {
+ index = (u8)toupper((int)*string);
+ if (isupper((int)index)) {
+ index = index - 'A' + 10;
+ } else {
+ goto error_exit;
+ }
+ }
+
+ if (index >= base) {
+ goto error_exit;
+ }
+
+ /* Check to see if value is out of range: */
+
+ if (return_value > ((ACPI_UINT64_MAX - (u64)index) / (u64)base)) {
+ goto error_exit;
+ } else {
+ return_value *= base;
+ return_value += index;
+ }
+
+ ++string;
}
- strncat(dest, source, max_transfer_length);
- return (FALSE);
+ /* If a minus sign was present, then "the conversion is negated": */
+
+ if (sign == ACPI_SIGN_NEGATIVE) {
+ return_value = (ACPI_UINT32_MAX - return_value) + 1;
+ }
+
+ *ret_integer = return_value;
+ return (status);
+
+error_exit:
+ switch (base) {
+ case 8:
+
+ status = AE_BAD_OCTAL_CONSTANT;
+ break;
+
+ case 10:
+
+ status = AE_BAD_DECIMAL_CONSTANT;
+ break;
+
+ case 16:
+
+ status = AE_BAD_HEX_CONSTANT;
+ break;
+
+ default:
+
+ /* Base validated above */
+
+ break;
+ }
+
+ return (status);
}
#endif
projects / cascardo / linux.git / commitdiff