config GENERIC_ISA_DMA
bool
select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
+ select ISA_DMA_API
config GENERIC_ISA_DMA_SUPPORT_BROKEN
bool
select GENERIC_ISA_DMA
+config ISA_DMA_API
+ bool
+
config GENERIC_GPIO
bool
vmlinuz.srec: vmlinuz
$(call cmd,objcopy)
-clean-files := $(objtree)/vmlinuz.*
+clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec}
*/
#ifdef CONFIG_32BIT
+#include <linux/types.h>
struct flock {
short l_type;
return -EFAULT;
}
- regs->regs[0] = 0;
switch (insn.i_format.opcode) {
/*
* jr and jalr are in r_format format.
{
/* do the secure computing check first */
if (!entryexit)
- secure_computing(regs->regs[0]);
+ secure_computing(regs->regs[2]);
if (unlikely(current->audit_context) && entryexit)
audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
out:
if (unlikely(current->audit_context) && !entryexit)
- audit_syscall_entry(audit_arch(), regs->regs[0],
+ audit_syscall_entry(audit_arch(), regs->regs[2],
regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
}
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ lw t1, PT_R2(sp) # syscall number
negu v0 # error
- sw v0, PT_R0(sp) # set flag for syscall
- # restarting
+ sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
o32_syscall_exit:
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ lw t1, PT_R2(sp) # syscall number
negu v0 # error
- sw v0, PT_R0(sp) # set flag for syscall
- # restarting
+ sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
j syscall_exit
* We probably should handle this case a bit more drastic.
*/
bad_stack:
- negu v0 # error
- sw v0, PT_R0(sp)
+ li v0, EFAULT
sw v0, PT_R2(sp)
li t0, 1 # set error flag
sw t0, PT_R7(sp)
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall
- # restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
n64_syscall_exit:
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
j syscall_exit
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
local_irq_disable # make sure need_resched and
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
j syscall_exit
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
o32_syscall_exit:
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
j syscall_exit
* The stackpointer for a call with more than 4 arguments is bad.
*/
bad_stack:
- dnegu v0 # error
- sd v0, PT_R0(sp)
+ li v0, EFAULT
sd v0, PT_R2(sp)
li t0, 1 # set error flag
sd t0, PT_R7(sp)
{
struct rt_sigframe __user *frame;
sigset_t set;
- stack_t st;
int sig;
frame = (struct rt_sigframe __user *) regs.regs[29];
else if (sig)
force_sig(sig, current);
- if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
- goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
+ do_sigaltstack(&frame->rs_uc.uc_stack, NULL, regs.regs[29]);
/*
* Don't let your children do this ...
struct mips_abi *abi = current->thread.abi;
void *vdso = current->mm->context.vdso;
- switch(regs->regs[0]) {
- case ERESTART_RESTARTBLOCK:
- case ERESTARTNOHAND:
- regs->regs[2] = EINTR;
- break;
- case ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
+ if (regs->regs[0]) {
+ switch(regs->regs[2]) {
+ case ERESTART_RESTARTBLOCK:
+ case ERESTARTNOHAND:
regs->regs[2] = EINTR;
break;
+ case ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->regs[2] = EINTR;
+ break;
+ }
+ /* fallthrough */
+ case ERESTARTNOINTR:
+ regs->regs[7] = regs->regs[26];
+ regs->regs[2] = regs->regs[0];
+ regs->cp0_epc -= 4;
}
- /* fallthrough */
- case ERESTARTNOINTR: /* Userland will reload $v0. */
- regs->regs[7] = regs->regs[26];
- regs->cp0_epc -= 8;
- }
- regs->regs[0] = 0; /* Don't deal with this again. */
+ regs->regs[0] = 0; /* Don't deal with this again. */
+ }
if (sig_uses_siginfo(ka))
ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
ret = abi->setup_frame(vdso + abi->signal_return_offset,
ka, regs, sig, oldset);
+ if (ret)
+ return ret;
+
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
return;
}
- /*
- * Who's code doesn't conform to the restartable syscall convention
- * dies here!!! The li instruction, a single machine instruction,
- * must directly be followed by the syscall instruction.
- */
if (regs->regs[0]) {
if (regs->regs[2] == ERESTARTNOHAND ||
regs->regs[2] == ERESTARTSYS ||
regs->regs[2] == ERESTARTNOINTR) {
+ regs->regs[2] = regs->regs[0];
regs->regs[7] = regs->regs[26];
- regs->cp0_epc -= 8;
+ regs->cp0_epc -= 4;
}
if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
regs->regs[2] = current->thread.abi->restart;
asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
struct rt_sigframe_n32 __user *frame;
+ mm_segment_t old_fs;
sigset_t set;
stack_t st;
s32 sp;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
+ set_fs(old_fs);
+
/*
* Don't let your children do this ...
unsigned long value;
unsigned int res;
- regs->regs[0] = 0;
-
/*
* This load never faults.
*/
const struct pci_device_id *ent)
{
struct fw_ohci *ohci;
- u32 bus_options, max_receive, link_speed, version, link_enh;
+ u32 bus_options, max_receive, link_speed, version;
u64 guid;
int i, err, n_ir, n_it;
size_t size;
if (param_quirks)
ohci->quirks = param_quirks;
- /* TI OHCI-Lynx and compatible: set recommended configuration bits. */
- if (dev->vendor == PCI_VENDOR_ID_TI) {
- pci_read_config_dword(dev, PCI_CFG_TI_LinkEnh, &link_enh);
-
- /* adjust latency of ATx FIFO: use 1.7 KB threshold */
- link_enh &= ~TI_LinkEnh_atx_thresh_mask;
- link_enh |= TI_LinkEnh_atx_thresh_1_7K;
-
- /* use priority arbitration for asynchronous responses */
- link_enh |= TI_LinkEnh_enab_unfair;
-
- /* required for aPhyEnhanceEnable to work */
- link_enh |= TI_LinkEnh_enab_accel;
-
- pci_write_config_dword(dev, PCI_CFG_TI_LinkEnh, link_enh);
- }
-
ar_context_init(&ohci->ar_request_ctx, ohci,
OHCI1394_AsReqRcvContextControlSet);
#define OHCI1394_phy_tcode 0xe
-/* TI extensions */
-
-#define PCI_CFG_TI_LinkEnh 0xf4
-#define TI_LinkEnh_enab_accel 0x00000002
-#define TI_LinkEnh_enab_unfair 0x00000080
-#define TI_LinkEnh_atx_thresh_mask 0x00003000
-#define TI_LinkEnh_atx_thresh_1_7K 0x00001000
-
#endif /* _FIREWIRE_OHCI_H */
INIT_COMPLETION(dev->cmd_complete);
dev->cmd_err = 0;
- /* Take I2C out of reset, configure it as master and set the
- * start bit */
- flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT;
+ /* Take I2C out of reset and configure it as master */
+ flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST;
/* if the slave address is ten bit address, enable XA bit */
if (msg->flags & I2C_M_TEN)
flag |= DAVINCI_I2C_MDR_XA;
if (!(msg->flags & I2C_M_RD))
flag |= DAVINCI_I2C_MDR_TRX;
- if (stop)
- flag |= DAVINCI_I2C_MDR_STP;
- if (msg->len == 0) {
+ if (msg->len == 0)
flag |= DAVINCI_I2C_MDR_RM;
- flag &= ~DAVINCI_I2C_MDR_STP;
- }
/* Enable receive or transmit interrupts */
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
dev->terminate = 0;
+ /*
+ * Write mode register first as needed for correct behaviour
+ * on OMAP-L138, but don't set STT yet to avoid a race with XRDY
+ * occuring before we have loaded DXR
+ */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
/*
* First byte should be set here, not after interrupt,
* because transmit-data-ready interrupt can come before
* NACK-interrupt during sending of previous message and
* ICDXR may have wrong data
+ * It also saves us one interrupt, slightly faster
*/
if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
dev->buf_len--;
}
- /* write the data into mode register; start transmitting */
+ /* Set STT to begin transmit now DXR is loaded */
+ flag |= DAVINCI_I2C_MDR_STT;
+ if (stop && msg->len != 0)
+ flag |= DAVINCI_I2C_MDR_STP;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
{
- int result;
-
- result = wait_event_interruptible_timeout(i2c_imx->queue,
- i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+ wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
- if (unlikely(result < 0)) {
- dev_dbg(&i2c_imx->adapter.dev, "<%s> result < 0\n", __func__);
- return result;
- } else if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
+ if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
return -ETIMEDOUT;
}
i2c_imx->i2csr = temp;
temp &= ~I2SR_IIF;
writeb(temp, i2c_imx->base + IMX_I2C_I2SR);
- wake_up_interruptible(&i2c_imx->queue);
+ wake_up(&i2c_imx->queue);
return IRQ_HANDLED;
}
if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
+ if (!dev->absinfo)
+ return -EINVAL;
+
t = _IOC_NR(cmd) & ABS_MAX;
abs = dev->absinfo[t];
}
}
- if (_IOC_DIR(cmd) == _IOC_READ) {
+ if (_IOC_DIR(cmd) == _IOC_WRITE) {
if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
+ if (!dev->absinfo)
+ return -EINVAL;
+
t = _IOC_NR(cmd) & ABS_MAX;
if (copy_from_user(&abs, p, min_t(size_t,
struct video_code32 {
char loadwhat[16]; /* name or tag of file being passed */
compat_int_t datasize;
- unsigned char *data;
+ compat_uptr_t data;
};
-static int get_microcode32(struct video_code *kp, struct video_code32 __user *up)
+static struct video_code __user *get_microcode32(struct video_code32 *kp)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct video_code32)) ||
- copy_from_user(kp->loadwhat, up->loadwhat, sizeof(up->loadwhat)) ||
- get_user(kp->datasize, &up->datasize) ||
- copy_from_user(kp->data, up->data, up->datasize))
- return -EFAULT;
- return 0;
+ struct video_code __user *up;
+
+ up = compat_alloc_user_space(sizeof(*up));
+
+ /*
+ * NOTE! We don't actually care if these fail. If the
+ * user address is invalid, the native ioctl will do
+ * the error handling for us
+ */
+ (void) copy_to_user(up->loadwhat, kp->loadwhat, sizeof(up->loadwhat));
+ (void) put_user(kp->datasize, &up->datasize);
+ (void) put_user(compat_ptr(kp->data), &up->data);
+ return up;
}
#define VIDIOCGTUNER32 _IOWR('v', 4, struct video_tuner32)
struct video_tuner vt;
struct video_buffer vb;
struct video_window vw;
- struct video_code vc;
+ struct video_code32 vc;
struct video_audio va;
#endif
struct v4l2_format v2f;
break;
case VIDIOCSMICROCODE:
- err = get_microcode32(&karg.vc, up);
- compatible_arg = 0;
+ /* Copy the 32-bit "video_code32" to kernel space */
+ if (copy_from_user(&karg.vc, up, sizeof(karg.vc)))
+ return -EFAULT;
+ /* Convert the 32-bit version to a 64-bit version in user space */
+ up = get_microcode32(&karg.vc);
break;
case VIDIOCSFREQ:
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/completion.h>
#include <asm/mach/flash.h>
#include <mach/mxc_nand.h>
int irq;
int eccsize;
- wait_queue_head_t irq_waitq;
+ struct completion op_completion;
uint8_t *data_buf;
unsigned int buf_start;
void (*send_read_id)(struct mxc_nand_host *);
uint16_t (*get_dev_status)(struct mxc_nand_host *);
int (*check_int)(struct mxc_nand_host *);
+ void (*irq_control)(struct mxc_nand_host *, int);
};
/* OOB placement block for use with hardware ecc generation */
{
struct mxc_nand_host *host = dev_id;
- disable_irq_nosync(irq);
+ if (!host->check_int(host))
+ return IRQ_NONE;
- wake_up(&host->irq_waitq);
+ host->irq_control(host, 0);
+
+ complete(&host->op_completion);
return IRQ_HANDLED;
}
if (!(tmp & NFC_V1_V2_CONFIG2_INT))
return 0;
- writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
+ if (!cpu_is_mx21())
+ writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
return 1;
}
+/*
+ * It has been observed that the i.MX21 cannot read the CONFIG2:INT bit
+ * if interrupts are masked (CONFIG1:INT_MSK is set). To handle this, the
+ * driver can enable/disable the irq line rather than simply masking the
+ * interrupts.
+ */
+static void irq_control_mx21(struct mxc_nand_host *host, int activate)
+{
+ if (activate)
+ enable_irq(host->irq);
+ else
+ disable_irq_nosync(host->irq);
+}
+
+static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
+{
+ uint16_t tmp;
+
+ tmp = readw(NFC_V1_V2_CONFIG1);
+
+ if (activate)
+ tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+ else
+ tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ writew(tmp, NFC_V1_V2_CONFIG1);
+}
+
+static void irq_control_v3(struct mxc_nand_host *host, int activate)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG2);
+
+ if (activate)
+ tmp &= ~NFC_V3_CONFIG2_INT_MSK;
+ else
+ tmp |= NFC_V3_CONFIG2_INT_MSK;
+
+ writel(tmp, NFC_V3_CONFIG2);
+}
+
/* This function polls the NANDFC to wait for the basic operation to
* complete by checking the INT bit of config2 register.
*/
if (useirq) {
if (!host->check_int(host)) {
-
- enable_irq(host->irq);
-
- wait_event(host->irq_waitq, host->check_int(host));
+ INIT_COMPLETION(host->op_completion);
+ host->irq_control(host, 1);
+ wait_for_completion(&host->op_completion);
}
} else {
while (max_retries-- > 0) {
NFC_V3_CONFIG2_2CMD_PHASES |
NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
NFC_V3_CONFIG2_ST_CMD(0x70) |
+ NFC_V3_CONFIG2_INT_MSK |
NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
if (chip->ecc.mode == NAND_ECC_HW)
host->send_read_id = send_read_id_v1_v2;
host->get_dev_status = get_dev_status_v1_v2;
host->check_int = check_int_v1_v2;
+ if (cpu_is_mx21())
+ host->irq_control = irq_control_mx21;
+ else
+ host->irq_control = irq_control_v1_v2;
}
if (nfc_is_v21()) {
host->send_read_id = send_read_id_v3;
host->check_int = check_int_v3;
host->get_dev_status = get_dev_status_v3;
+ host->irq_control = irq_control_v3;
oob_smallpage = &nandv2_hw_eccoob_smallpage;
oob_largepage = &nandv2_hw_eccoob_largepage;
} else
this->options |= NAND_USE_FLASH_BBT;
}
- init_waitqueue_head(&host->irq_waitq);
+ init_completion(&host->op_completion);
host->irq = platform_get_irq(pdev, 0);
+ /*
+ * mask the interrupt. For i.MX21 explicitely call
+ * irq_control_v1_v2 to use the mask bit. We can't call
+ * disable_irq_nosync() for an interrupt we do not own yet.
+ */
+ if (cpu_is_mx21())
+ irq_control_v1_v2(host, 0);
+ else
+ host->irq_control(host, 0);
+
err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
if (err)
goto eirq;
+ host->irq_control(host, 0);
+
+ /*
+ * Now that the interrupt is disabled make sure the interrupt
+ * mask bit is cleared on i.MX21. Otherwise we can't read
+ * the interrupt status bit on this machine.
+ */
+ if (cpu_is_mx21())
+ irq_control_v1_v2(host, 1);
+
/* first scan to find the device and get the page size */
if (nand_scan_ident(mtd, 1, NULL)) {
err = -ENXIO;
unsigned long ret;
void *addr;
- if (to_user)
+ addr = kmap(page);
+ if (to_user) {
rds_stats_add(s_copy_to_user, bytes);
- else
+ ret = copy_to_user(ptr, addr + offset, bytes);
+ } else {
rds_stats_add(s_copy_from_user, bytes);
-
- addr = kmap_atomic(page, KM_USER0);
- if (to_user)
- ret = __copy_to_user_inatomic(ptr, addr + offset, bytes);
- else
- ret = __copy_from_user_inatomic(addr + offset, ptr, bytes);
- kunmap_atomic(addr, KM_USER0);
-
- if (ret) {
- addr = kmap(page);
- if (to_user)
- ret = copy_to_user(ptr, addr + offset, bytes);
- else
- ret = copy_from_user(addr + offset, ptr, bytes);
- kunmap(page);
- if (ret)
- return -EFAULT;
+ ret = copy_from_user(addr + offset, ptr, bytes);
}
+ kunmap(page);
- return 0;
+ return ret ? -EFAULT : 0;
}
EXPORT_SYMBOL_GPL(rds_page_copy_user);
projects / cascardo / linux.git / commitdiff