}
}
-static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
+static void ilk_init_lp_watermarks(struct drm_device *dev)
{
- hsw_set_power_well(dev_priv, power_well, power_well->count > 0);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ I915_WRITE(WM3_LP_ILK, I915_READ(WM3_LP_ILK) & ~WM1_LP_SR_EN);
+ I915_WRITE(WM2_LP_ILK, I915_READ(WM2_LP_ILK) & ~WM1_LP_SR_EN);
+ I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN);
/*
- * We're taking over the BIOS, so clear any requests made by it since
- * the driver is in charge now.
+ * Don't touch WM1S_LP_EN here.
+ * Doing so could cause underruns.
*/
- if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
- I915_WRITE(HSW_PWR_WELL_BIOS, 0);
-}
-
-static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- hsw_set_power_well(dev_priv, power_well, true);
-}
-
-static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- hsw_set_power_well(dev_priv, power_well, false);
}
-static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
-}
-
-static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- return true;
-}
-
-static void vlv_set_power_well(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well, bool enable)
+static void ironlake_init_clock_gating(struct drm_device *dev)
{
- enum punit_power_well power_well_id = power_well->data;
- u32 mask;
- u32 state;
- u32 ctrl;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
- mask = PUNIT_PWRGT_MASK(power_well_id);
- state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
- PUNIT_PWRGT_PWR_GATE(power_well_id);
+ /*
+ * Required for FBC
+ * WaFbcDisableDpfcClockGating:ilk
+ */
+ dspclk_gate |= ILK_DPFCRUNIT_CLOCK_GATE_DISABLE |
+ ILK_DPFCUNIT_CLOCK_GATE_DISABLE |
+ ILK_DPFDUNIT_CLOCK_GATE_ENABLE;
- mutex_lock(&dev_priv->rps.hw_lock);
+ I915_WRITE(PCH_3DCGDIS0,
+ MARIUNIT_CLOCK_GATE_DISABLE |
+ SVSMUNIT_CLOCK_GATE_DISABLE);
+ I915_WRITE(PCH_3DCGDIS1,
+ VFMUNIT_CLOCK_GATE_DISABLE);
-#define COND \
- ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
+ /*
+ * According to the spec the following bits should be set in
+ * order to enable memory self-refresh
+ * The bit 22/21 of 0x42004
+ * The bit 5 of 0x42020
+ * The bit 15 of 0x45000
+ */
+ I915_WRITE(ILK_DISPLAY_CHICKEN2,
+ (I915_READ(ILK_DISPLAY_CHICKEN2) |
+ ILK_DPARB_GATE | ILK_VSDPFD_FULL));
+ dspclk_gate |= ILK_DPARBUNIT_CLOCK_GATE_ENABLE;
+ I915_WRITE(DISP_ARB_CTL,
+ (I915_READ(DISP_ARB_CTL) |
+ DISP_FBC_WM_DIS));
- if (COND)
- goto out;
+ ilk_init_lp_watermarks(dev);
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
- ctrl &= ~mask;
- ctrl |= state;
- vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
+ /*
+ * Based on the document from hardware guys the following bits
+ * should be set unconditionally in order to enable FBC.
+ * The bit 22 of 0x42000
+ * The bit 22 of 0x42004
+ * The bit 7,8,9 of 0x42020.
+ */
+ if (IS_IRONLAKE_M(dev)) {
+ /* WaFbcAsynchFlipDisableFbcQueue:ilk */
+ I915_WRITE(ILK_DISPLAY_CHICKEN1,
+ I915_READ(ILK_DISPLAY_CHICKEN1) |
+ ILK_FBCQ_DIS);
+ I915_WRITE(ILK_DISPLAY_CHICKEN2,
+ I915_READ(ILK_DISPLAY_CHICKEN2) |
+ ILK_DPARB_GATE);
+ }
- if (wait_for(COND, 100))
- DRM_ERROR("timout setting power well state %08x (%08x)\n",
- state,
- vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
+ I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
-#undef COND
+ I915_WRITE(ILK_DISPLAY_CHICKEN2,
+ I915_READ(ILK_DISPLAY_CHICKEN2) |
+ ILK_ELPIN_409_SELECT);
+ I915_WRITE(_3D_CHICKEN2,
+ _3D_CHICKEN2_WM_READ_PIPELINED << 16 |
+ _3D_CHICKEN2_WM_READ_PIPELINED);
-out:
- mutex_unlock(&dev_priv->rps.hw_lock);
-}
+ /* WaDisableRenderCachePipelinedFlush:ilk */
+ I915_WRITE(CACHE_MODE_0,
+ _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
-static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
-}
+ /* WaDisable_RenderCache_OperationalFlush:ilk */
+ I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
-static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_set_power_well(dev_priv, power_well, true);
-}
+ g4x_disable_trickle_feed(dev);
-static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_set_power_well(dev_priv, power_well, false);
+ ibx_init_clock_gating(dev);
}
-static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
+static void cpt_init_clock_gating(struct drm_device *dev)
{
- int power_well_id = power_well->data;
- bool enabled = false;
- u32 mask;
- u32 state;
- u32 ctrl;
-
- mask = PUNIT_PWRGT_MASK(power_well_id);
- ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
-
- mutex_lock(&dev_priv->rps.hw_lock);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe;
+ uint32_t val;
- state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
/*
- * We only ever set the power-on and power-gate states, anything
- * else is unexpected.
+ * On Ibex Peak and Cougar Point, we need to disable clock
+ * gating for the panel power sequencer or it will fail to
+ * start up when no ports are active.
*/
- WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
- state != PUNIT_PWRGT_PWR_GATE(power_well_id));
- if (state == ctrl)
- enabled = true;
-
- /*
- * A transient state at this point would mean some unexpected party
- * is poking at the power controls too.
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE |
+ PCH_DPLUNIT_CLOCK_GATE_DISABLE |
+ PCH_CPUNIT_CLOCK_GATE_DISABLE);
+ I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
+ DPLS_EDP_PPS_FIX_DIS);
+ /* The below fixes the weird display corruption, a few pixels shifted
+ * downward, on (only) LVDS of some HP laptops with IVY.
*/
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
- WARN_ON(ctrl != state);
+ for_each_pipe(dev_priv, pipe) {
+ val = I915_READ(TRANS_CHICKEN2(pipe));
+ val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
+ val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
+ if (dev_priv->vbt.fdi_rx_polarity_inverted)
+ val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
+ val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
+ val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
+ val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
+ I915_WRITE(TRANS_CHICKEN2(pipe), val);
+ }
+ /* WADP0ClockGatingDisable */
+ for_each_pipe(dev_priv, pipe) {
+ I915_WRITE(TRANS_CHICKEN1(pipe),
+ TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
+ }
+}
- mutex_unlock(&dev_priv->rps.hw_lock);
+static void gen6_check_mch_setup(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp;
- return enabled;
+ tmp = I915_READ(MCH_SSKPD);
+ if ((tmp & MCH_SSKPD_WM0_MASK) != MCH_SSKPD_WM0_VAL)
+ DRM_DEBUG_KMS("Wrong MCH_SSKPD value: 0x%08x This can cause underruns.\n",
+ tmp);
}
-static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
+static void gen6_init_clock_gating(struct drm_device *dev)
{
- WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
- vlv_set_power_well(dev_priv, power_well, true);
+ I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
- spin_lock_irq(&dev_priv->irq_lock);
- valleyview_enable_display_irqs(dev_priv);
- spin_unlock_irq(&dev_priv->irq_lock);
+ I915_WRITE(ILK_DISPLAY_CHICKEN2,
+ I915_READ(ILK_DISPLAY_CHICKEN2) |
+ ILK_ELPIN_409_SELECT);
- /*
- * During driver initialization/resume we can avoid restoring the
- * part of the HW/SW state that will be inited anyway explicitly.
- */
- if (dev_priv->power_domains.initializing)
- return;
+ /* WaDisableHiZPlanesWhenMSAAEnabled:snb */
+ I915_WRITE(_3D_CHICKEN,
+ _MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB));
- /* WaSetupGtModeTdRowDispatch:snb */
- if (IS_SNB_GT1(dev))
- I915_WRITE(GEN6_GT_MODE,
- _MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE));
-
- intel_hpd_init(dev_priv->dev);
+ /* WaDisable_RenderCache_OperationalFlush:snb */
+ I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
- i915_redisable_vga_power_on(dev_priv->dev);
-}
+ /*
+ * BSpec recoomends 8x4 when MSAA is used,
+ * however in practice 16x4 seems fastest.
+ *
+ * Note that PS/WM thread counts depend on the WIZ hashing
+ * disable bit, which we don't touch here, but it's good
+ * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
+ */
+ I915_WRITE(GEN6_GT_MODE,
+ GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4);
-static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+ ilk_init_lp_watermarks(dev);
- spin_lock_irq(&dev_priv->irq_lock);
- valleyview_disable_display_irqs(dev_priv);
- spin_unlock_irq(&dev_priv->irq_lock);
+ I915_WRITE(CACHE_MODE_0,
+ _MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
- vlv_set_power_well(dev_priv, power_well, false);
+ I915_WRITE(GEN6_UCGCTL1,
+ I915_READ(GEN6_UCGCTL1) |
+ GEN6_BLBUNIT_CLOCK_GATE_DISABLE |
+ GEN6_CSUNIT_CLOCK_GATE_DISABLE);
- vlv_power_sequencer_reset(dev_priv);
-}
+ /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+ * gating disable must be set. Failure to set it results in
+ * flickering pixels due to Z write ordering failures after
+ * some amount of runtime in the Mesa "fire" demo, and Unigine
+ * Sanctuary and Tropics, and apparently anything else with
+ * alpha test or pixel discard.
+ *
+ * According to the spec, bit 11 (RCCUNIT) must also be set,
+ * but we didn't debug actual testcases to find it out.
+ *
+ * WaDisableRCCUnitClockGating:snb
+ * WaDisableRCPBUnitClockGating:snb
+ */
+ I915_WRITE(GEN6_UCGCTL2,
+ GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+ GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
-static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+ /* WaStripsFansDisableFastClipPerformanceFix:snb */
+ I915_WRITE(_3D_CHICKEN3,
+ _MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL));
/*
- * Enable the CRI clock source so we can get at the
- * display and the reference clock for VGA
- * hotplug / manual detection.
+ * Bspec says:
+ * "This bit must be set if 3DSTATE_CLIP clip mode is set to normal and
+ * 3DSTATE_SF number of SF output attributes is more than 16."
*/
- I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
- DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
- udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
-
- vlv_set_power_well(dev_priv, power_well, true);
+ I915_WRITE(_3D_CHICKEN3,
+ _MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH));
/*
- * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
- * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
- * a. GUnit 0x2110 bit[0] set to 1 (def 0)
- * b. The other bits such as sfr settings / modesel may all
- * be set to 0.
+ * According to the spec the following bits should be
+ * set in order to enable memory self-refresh and fbc:
+ * The bit21 and bit22 of 0x42000
+ * The bit21 and bit22 of 0x42004
+ * The bit5 and bit7 of 0x42020
+ * The bit14 of 0x70180
+ * The bit14 of 0x71180
*
- * This should only be done on init and resume from S3 with
- * both PLLs disabled, or we risk losing DPIO and PLL
- * synchronization.
+ * WaFbcAsynchFlipDisableFbcQueue:snb
*/
- I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
-}
-
-static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum pipe pipe;
-
- WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+ I915_WRITE(ILK_DISPLAY_CHICKEN1,
+ I915_READ(ILK_DISPLAY_CHICKEN1) |
+ ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
+ I915_WRITE(ILK_DISPLAY_CHICKEN2,
+ I915_READ(ILK_DISPLAY_CHICKEN2) |
+ ILK_DPARB_GATE | ILK_VSDPFD_FULL);
+ I915_WRITE(ILK_DSPCLK_GATE_D,
+ I915_READ(ILK_DSPCLK_GATE_D) |
+ ILK_DPARBUNIT_CLOCK_GATE_ENABLE |
+ ILK_DPFDUNIT_CLOCK_GATE_ENABLE);
- for_each_pipe(dev_priv, pipe)
- assert_pll_disabled(dev_priv, pipe);
+ g4x_disable_trickle_feed(dev);
- /* Assert common reset */
- I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
+ cpt_init_clock_gating(dev);
- vlv_set_power_well(dev_priv, power_well, false);
+ gen6_check_mch_setup(dev);
}
-static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
+static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)
{
- enum dpio_phy phy;
-
- WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
- power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+ uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE);
/*
- * Enable the CRI clock source so we can get at the
- * display and the reference clock for VGA
- * hotplug / manual detection.
+ * WaVSThreadDispatchOverride:ivb,vlv
+ *
+ * This actually overrides the dispatch
+ * mode for all thread types.
*/
- if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
- phy = DPIO_PHY0;
- I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
- DPLL_REFA_CLK_ENABLE_VLV);
- I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
- DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
- } else {
- phy = DPIO_PHY1;
- I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
- DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
- }
- udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
- vlv_set_power_well(dev_priv, power_well, true);
-
- /* Poll for phypwrgood signal */
- if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
- DRM_ERROR("Display PHY %d is not power up\n", phy);
+ reg &= ~GEN7_FF_SCHED_MASK;
+ reg |= GEN7_FF_TS_SCHED_HW;
+ reg |= GEN7_FF_VS_SCHED_HW;
+ reg |= GEN7_FF_DS_SCHED_HW;
- I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) |
- PHY_COM_LANE_RESET_DEASSERT(phy));
+ I915_WRITE(GEN7_FF_THREAD_MODE, reg);
}
-static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
+static void lpt_init_clock_gating(struct drm_device *dev)
{
- enum dpio_phy phy;
-
- WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
- power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
-
- if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
- phy = DPIO_PHY0;
- assert_pll_disabled(dev_priv, PIPE_A);
- assert_pll_disabled(dev_priv, PIPE_B);
- } else {
- phy = DPIO_PHY1;
- assert_pll_disabled(dev_priv, PIPE_C);
- }
+ struct drm_i915_private *dev_priv = dev->dev_private;
- I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) &
- ~PHY_COM_LANE_RESET_DEASSERT(phy));
+ /*
+ * TODO: this bit should only be enabled when really needed, then
+ * disabled when not needed anymore in order to save power.
+ */
+ if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE)
+ I915_WRITE(SOUTH_DSPCLK_GATE_D,
+ I915_READ(SOUTH_DSPCLK_GATE_D) |
+ PCH_LP_PARTITION_LEVEL_DISABLE);
- vlv_set_power_well(dev_priv, power_well, false);
+ /* WADPOClockGatingDisable:hsw */
+ I915_WRITE(_TRANSA_CHICKEN1,
+ I915_READ(_TRANSA_CHICKEN1) |
+ TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
}
-static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
+static void lpt_suspend_hw(struct drm_device *dev)
{
- enum pipe pipe = power_well->data;
- bool enabled;
- u32 state, ctrl;
-
- mutex_lock(&dev_priv->rps.hw_lock);
-
- state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
- /*
- * We only ever set the power-on and power-gate states, anything
- * else is unexpected.
- */
- WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
- enabled = state == DP_SSS_PWR_ON(pipe);
-
- /*
- * A transient state at this point would mean some unexpected party
- * is poking at the power controls too.
- */
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
- WARN_ON(ctrl << 16 != state);
+ struct drm_i915_private *dev_priv = dev->dev_private;
- mutex_unlock(&dev_priv->rps.hw_lock);
+ if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D);
- return enabled;
+ val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ }
}
-static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well,
- bool enable)
+static void broadwell_init_clock_gating(struct drm_device *dev)
{
- enum pipe pipe = power_well->data;
- u32 state;
- u32 ctrl;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe;
- state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
+ I915_WRITE(WM3_LP_ILK, 0);
+ I915_WRITE(WM2_LP_ILK, 0);
+ I915_WRITE(WM1_LP_ILK, 0);
- mutex_lock(&dev_priv->rps.hw_lock);
+ /* WaSwitchSolVfFArbitrationPriority:bdw */
+ I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
-#define COND \
- ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
+ /* WaPsrDPAMaskVBlankInSRD:bdw */
+ I915_WRITE(CHICKEN_PAR1_1,
+ I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD);
- if (COND)
- goto out;
+ /* WaPsrDPRSUnmaskVBlankInSRD:bdw */
+ for_each_pipe(dev_priv, pipe) {
+ I915_WRITE(CHICKEN_PIPESL_1(pipe),
+ I915_READ(CHICKEN_PIPESL_1(pipe)) |
+ BDW_DPRS_MASK_VBLANK_SRD);
+ }
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
- ctrl &= ~DP_SSC_MASK(pipe);
- ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
- vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
+ /* WaVSRefCountFullforceMissDisable:bdw */
+ /* WaDSRefCountFullforceMissDisable:bdw */
+ I915_WRITE(GEN7_FF_THREAD_MODE,
+ I915_READ(GEN7_FF_THREAD_MODE) &
+ ~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
- if (wait_for(COND, 100))
- DRM_ERROR("timout setting power well state %08x (%08x)\n",
- state,
- vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
+ I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
+ _MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
-#undef COND
+ /* WaDisableSDEUnitClockGating:bdw */
+ I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
+ GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
-out:
- mutex_unlock(&dev_priv->rps.hw_lock);
+ lpt_init_clock_gating(dev);
}
-static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
+static void haswell_init_clock_gating(struct drm_device *dev)
{
- chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
-}
+ struct drm_i915_private *dev_priv = dev->dev_private;
-static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- WARN_ON_ONCE(power_well->data != PIPE_A &&
- power_well->data != PIPE_B &&
- power_well->data != PIPE_C);
+ ilk_init_lp_watermarks(dev);
- chv_set_pipe_power_well(dev_priv, power_well, true);
-}
+ /* L3 caching of data atomics doesn't work -- disable it. */
+ I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE);
+ I915_WRITE(HSW_ROW_CHICKEN3,
+ _MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE));
-static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- WARN_ON_ONCE(power_well->data != PIPE_A &&
- power_well->data != PIPE_B &&
- power_well->data != PIPE_C);
+ /* This is required by WaCatErrorRejectionIssue:hsw */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
- chv_set_pipe_power_well(dev_priv, power_well, false);
-}
+ /* WaVSRefCountFullforceMissDisable:hsw */
+ I915_WRITE(GEN7_FF_THREAD_MODE,
+ I915_READ(GEN7_FF_THREAD_MODE) & ~GEN7_FF_VS_REF_CNT_FFME);
-static void check_power_well_state(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- bool enabled = power_well->ops->is_enabled(dev_priv, power_well);
+ /* WaDisable_RenderCache_OperationalFlush:hsw */
+ I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
- if (power_well->always_on || !i915.disable_power_well) {
- if (!enabled)
- goto mismatch;
+ /* enable HiZ Raw Stall Optimization */
+ I915_WRITE(CACHE_MODE_0_GEN7,
+ _MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
- return;
- }
+ /* WaDisable4x2SubspanOptimization:hsw */
+ I915_WRITE(CACHE_MODE_1,
+ _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
+
+ /*
+ * BSpec recommends 8x4 when MSAA is used,
+ * however in practice 16x4 seems fastest.
+ *
+ * Note that PS/WM thread counts depend on the WIZ hashing
+ * disable bit, which we don't touch here, but it's good
+ * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
+ */
+ I915_WRITE(GEN7_GT_MODE,
+ GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4);
- if (enabled != (power_well->count > 0))
- goto mismatch;
+ /* WaSwitchSolVfFArbitrationPriority:hsw */
+ I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
- return;
+ /* WaRsPkgCStateDisplayPMReq:hsw */
+ I915_WRITE(CHICKEN_PAR1_1,
+ I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
-mismatch:
- WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
- power_well->name, power_well->always_on, enabled,
- power_well->count, i915.disable_power_well);
+ lpt_init_clock_gating(dev);
}
-void intel_display_power_get(struct drm_i915_private *dev_priv,
- enum intel_display_power_domain domain)
+static void ivybridge_init_clock_gating(struct drm_device *dev)
{
- struct i915_power_domains *power_domains;
- struct i915_power_well *power_well;
- int i;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t snpcr;
- intel_runtime_pm_get(dev_priv);
+ ilk_init_lp_watermarks(dev);
- power_domains = &dev_priv->power_domains;
+ I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE);
- mutex_lock(&power_domains->lock);
+ /* WaDisableEarlyCull:ivb */
+ I915_WRITE(_3D_CHICKEN3,
+ _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
- for_each_power_well(i, power_well, BIT(domain), power_domains) {
- if (!power_well->count++) {
- DRM_DEBUG_KMS("enabling %s\n", power_well->name);
- power_well->ops->enable(dev_priv, power_well);
- power_well->hw_enabled = true;
- }
+ /* WaDisableBackToBackFlipFix:ivb */
+ I915_WRITE(IVB_CHICKEN3,
+ CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
+ CHICKEN3_DGMG_DONE_FIX_DISABLE);
- check_power_well_state(dev_priv, power_well);
- }
+ /* WaDisablePSDDualDispatchEnable:ivb */
+ if (IS_IVB_GT1(dev))
+ I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
+ _MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
- power_domains->domain_use_count[domain]++;
+ /* WaDisable_RenderCache_OperationalFlush:ivb */
+ I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
- mutex_unlock(&power_domains->lock);
-}
+ /* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */
+ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+ GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
-void intel_display_power_put(struct drm_i915_private *dev_priv,
- enum intel_display_power_domain domain)
-{
- struct i915_power_domains *power_domains;
- struct i915_power_well *power_well;
- int i;
+ /* WaApplyL3ControlAndL3ChickenMode:ivb */
+ I915_WRITE(GEN7_L3CNTLREG1,
+ GEN7_WA_FOR_GEN7_L3_CONTROL);
+ I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+ GEN7_WA_L3_CHICKEN_MODE);
+ if (IS_IVB_GT1(dev))
+ I915_WRITE(GEN7_ROW_CHICKEN2,
+ _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
+ else {
+ /* must write both registers */
+ I915_WRITE(GEN7_ROW_CHICKEN2,
+ _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
+ I915_WRITE(GEN7_ROW_CHICKEN2_GT2,
+ _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
+ }
- power_domains = &dev_priv->power_domains;
+ /* WaForceL3Serialization:ivb */
+ I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
+ ~L3SQ_URB_READ_CAM_MATCH_DISABLE);
- mutex_lock(&power_domains->lock);
+ /*
+ * According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating:ivb workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2,
+ GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
- WARN_ON(!power_domains->domain_use_count[domain]);
- power_domains->domain_use_count[domain]--;
+ /* This is required by WaCatErrorRejectionIssue:ivb */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
- for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
- WARN_ON(!power_well->count);
+ g4x_disable_trickle_feed(dev);
- if (!--power_well->count && i915.disable_power_well) {
- DRM_DEBUG_KMS("disabling %s\n", power_well->name);
- power_well->hw_enabled = false;
- power_well->ops->disable(dev_priv, power_well);
- }
+ gen7_setup_fixed_func_scheduler(dev_priv);
- check_power_well_state(dev_priv, power_well);
+ if (0) { /* causes HiZ corruption on ivb:gt1 */
+ /* enable HiZ Raw Stall Optimization */
+ I915_WRITE(CACHE_MODE_0_GEN7,
+ _MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
}
- mutex_unlock(&power_domains->lock);
-
- intel_runtime_pm_put(dev_priv);
-}
-
-static struct i915_power_domains *hsw_pwr;
-
-/* Display audio driver power well request */
-int i915_request_power_well(void)
-{
- struct drm_i915_private *dev_priv;
-
- if (!hsw_pwr)
- return -ENODEV;
+ /* WaDisable4x2SubspanOptimization:ivb */
+ I915_WRITE(CACHE_MODE_1,
+ _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
- dev_priv = container_of(hsw_pwr, struct drm_i915_private,
- power_domains);
- intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
- return 0;
-}
-EXPORT_SYMBOL_GPL(i915_request_power_well);
+ /*
+ * BSpec recommends 8x4 when MSAA is used,
+ * however in practice 16x4 seems fastest.
+ *
+ * Note that PS/WM thread counts depend on the WIZ hashing
+ * disable bit, which we don't touch here, but it's good
+ * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
+ */
+ I915_WRITE(GEN7_GT_MODE,
+ GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4);
-/* Display audio driver power well release */
-int i915_release_power_well(void)
-{
- struct drm_i915_private *dev_priv;
+ snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
+ snpcr &= ~GEN6_MBC_SNPCR_MASK;
+ snpcr |= GEN6_MBC_SNPCR_MED;
+ I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
- if (!hsw_pwr)
- return -ENODEV;
+ if (!HAS_PCH_NOP(dev))
+ cpt_init_clock_gating(dev);
- dev_priv = container_of(hsw_pwr, struct drm_i915_private,
- power_domains);
- intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
- return 0;
+ gen6_check_mch_setup(dev);
}
-EXPORT_SYMBOL_GPL(i915_release_power_well);
-/*
- * Private interface for the audio driver to get CDCLK in kHz.
- *
- * Caller must request power well using i915_request_power_well() prior to
- * making the call.
- */
-int i915_get_cdclk_freq(void)
+static void valleyview_init_clock_gating(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv;
-
- if (!hsw_pwr)
- return -ENODEV;
-
- dev_priv = container_of(hsw_pwr, struct drm_i915_private,
- power_domains);
-
- return intel_ddi_get_cdclk_freq(dev_priv);
-}
-EXPORT_SYMBOL_GPL(i915_get_cdclk_freq);
-
-
-#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
-
-#define HSW_ALWAYS_ON_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PIPE_A) | \
- BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
- BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
- BIT(POWER_DOMAIN_PORT_CRT) | \
- BIT(POWER_DOMAIN_PLLS) | \
- BIT(POWER_DOMAIN_INIT))
-#define HSW_DISPLAY_POWER_DOMAINS ( \
- (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define BDW_ALWAYS_ON_POWER_DOMAINS ( \
- HSW_ALWAYS_ON_POWER_DOMAINS | \
- BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER))
-#define BDW_DISPLAY_POWER_DOMAINS ( \
- (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT)
-#define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK
-
-#define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
- BIT(POWER_DOMAIN_PORT_CRT) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define CHV_PIPE_A_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PIPE_A) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define CHV_PIPE_B_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PIPE_B) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define CHV_PIPE_C_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PIPE_C) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_CMN_D_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
- BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
- BIT(POWER_DOMAIN_INIT))
-
-static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
- .sync_hw = i9xx_always_on_power_well_noop,
- .enable = i9xx_always_on_power_well_noop,
- .disable = i9xx_always_on_power_well_noop,
- .is_enabled = i9xx_always_on_power_well_enabled,
-};
-
-static const struct i915_power_well_ops chv_pipe_power_well_ops = {
- .sync_hw = chv_pipe_power_well_sync_hw,
- .enable = chv_pipe_power_well_enable,
- .disable = chv_pipe_power_well_disable,
- .is_enabled = chv_pipe_power_well_enabled,
-};
-
-static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
- .sync_hw = vlv_power_well_sync_hw,
- .enable = chv_dpio_cmn_power_well_enable,
- .disable = chv_dpio_cmn_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
-
-static struct i915_power_well i9xx_always_on_power_well[] = {
- {
- .name = "always-on",
- .always_on = 1,
- .domains = POWER_DOMAIN_MASK,
- .ops = &i9xx_always_on_power_well_ops,
- },
-};
-
-static const struct i915_power_well_ops hsw_power_well_ops = {
- .sync_hw = hsw_power_well_sync_hw,
- .enable = hsw_power_well_enable,
- .disable = hsw_power_well_disable,
- .is_enabled = hsw_power_well_enabled,
-};
-
-static struct i915_power_well hsw_power_wells[] = {
- {
- .name = "always-on",
- .always_on = 1,
- .domains = HSW_ALWAYS_ON_POWER_DOMAINS,
- .ops = &i9xx_always_on_power_well_ops,
- },
- {
- .name = "display",
- .domains = HSW_DISPLAY_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
- },
-};
+ struct drm_i915_private *dev_priv = dev->dev_private;
-static struct i915_power_well bdw_power_wells[] = {
- {
- .name = "always-on",
- .always_on = 1,
- .domains = BDW_ALWAYS_ON_POWER_DOMAINS,
- .ops = &i9xx_always_on_power_well_ops,
- },
- {
- .name = "display",
- .domains = BDW_DISPLAY_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
- },
-};
+ I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
-static const struct i915_power_well_ops vlv_display_power_well_ops = {
- .sync_hw = vlv_power_well_sync_hw,
- .enable = vlv_display_power_well_enable,
- .disable = vlv_display_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
+ /* WaDisableEarlyCull:vlv */
+ I915_WRITE(_3D_CHICKEN3,
+ _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
-static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
- .sync_hw = vlv_power_well_sync_hw,
- .enable = vlv_dpio_cmn_power_well_enable,
- .disable = vlv_dpio_cmn_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
+ /* WaDisableBackToBackFlipFix:vlv */
+ I915_WRITE(IVB_CHICKEN3,
+ CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
+ CHICKEN3_DGMG_DONE_FIX_DISABLE);
-static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
- .sync_hw = vlv_power_well_sync_hw,
- .enable = vlv_power_well_enable,
- .disable = vlv_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
+ /* WaPsdDispatchEnable:vlv */
+ /* WaDisablePSDDualDispatchEnable:vlv */
+ I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
+ _MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP |
+ GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
-static struct i915_power_well vlv_power_wells[] = {
- {
- .name = "always-on",
- .always_on = 1,
- .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
- .ops = &i9xx_always_on_power_well_ops,
- },
- {
- .name = "display",
- .domains = VLV_DISPLAY_POWER_DOMAINS,
- .data = PUNIT_POWER_WELL_DISP2D,
- .ops = &vlv_display_power_well_ops,
- },
- {
- .name = "dpio-tx-b-01",
- .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
- },
- {
- .name = "dpio-tx-b-23",
- .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
- },
- {
- .name = "dpio-tx-c-01",
- .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
- },
- {
- .name = "dpio-tx-c-23",
- .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
- },
- {
- .name = "dpio-common",
- .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
- .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
- .ops = &vlv_dpio_cmn_power_well_ops,
- },
-};
+ /* WaDisable_RenderCache_OperationalFlush:vlv */
+ I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
-static struct i915_power_well chv_power_wells[] = {
- {
- .name = "always-on",
- .always_on = 1,
- .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
- .ops = &i9xx_always_on_power_well_ops,
- },
-#if 0
- {
- .name = "display",
- .domains = VLV_DISPLAY_POWER_DOMAINS,
- .data = PUNIT_POWER_WELL_DISP2D,
- .ops = &vlv_display_power_well_ops,
- },
- {
- .name = "pipe-a",
- .domains = CHV_PIPE_A_POWER_DOMAINS,
- .data = PIPE_A,
- .ops = &chv_pipe_power_well_ops,
- },
- {
- .name = "pipe-b",
- .domains = CHV_PIPE_B_POWER_DOMAINS,
- .data = PIPE_B,
- .ops = &chv_pipe_power_well_ops,
- },
- {
- .name = "pipe-c",
- .domains = CHV_PIPE_C_POWER_DOMAINS,
- .data = PIPE_C,
- .ops = &chv_pipe_power_well_ops,
- },
-#endif
- {
- .name = "dpio-common-bc",
- /*
- * XXX: cmnreset for one PHY seems to disturb the other.
- * As a workaround keep both powered on at the same
- * time for now.
- */
- .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
- .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
- .ops = &chv_dpio_cmn_power_well_ops,
- },
- {
- .name = "dpio-common-d",
- /*
- * XXX: cmnreset for one PHY seems to disturb the other.
- * As a workaround keep both powered on at the same
- * time for now.
- */
- .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
- .data = PUNIT_POWER_WELL_DPIO_CMN_D,
- .ops = &chv_dpio_cmn_power_well_ops,
- },
-#if 0
- {
- .name = "dpio-tx-b-01",
- .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
- },
- {
- .name = "dpio-tx-b-23",
- .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
- },
- {
- .name = "dpio-tx-c-01",
- .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
- },
- {
- .name = "dpio-tx-c-23",
- .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
- VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
- },
- {
- .name = "dpio-tx-d-01",
- .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
- CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01,
- },
- {
- .name = "dpio-tx-d-23",
- .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
- CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
- .ops = &vlv_dpio_power_well_ops,
- .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23,
- },
-#endif
-};
+ /* WaForceL3Serialization:vlv */
+ I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
+ ~L3SQ_URB_READ_CAM_MATCH_DISABLE);
-static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
- enum punit_power_well power_well_id)
-{
- struct i915_power_domains *power_domains = &dev_priv->power_domains;
- struct i915_power_well *power_well;
- int i;
+ /* WaDisableDopClockGating:vlv */
+ I915_WRITE(GEN7_ROW_CHICKEN2,
+ _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
- for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
- if (power_well->data == power_well_id)
- return power_well;
- }
+ /* This is required by WaCatErrorRejectionIssue:vlv */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
- return NULL;
-}
+ gen7_setup_fixed_func_scheduler(dev_priv);
-#define set_power_wells(power_domains, __power_wells) ({ \
- (power_domains)->power_wells = (__power_wells); \
- (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \
-})
+ /*
+ * According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating:vlv workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2,
+ GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
-int intel_power_domains_init(struct drm_i915_private *dev_priv)
-{
- struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ /* WaDisableL3Bank2xClockGate:vlv
+ * Disabling L3 clock gating- MMIO 940c[25] = 1
+ * Set bit 25, to disable L3_BANK_2x_CLK_GATING */
+ I915_WRITE(GEN7_UCGCTL4,
+ I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE);
- mutex_init(&power_domains->lock);
+ I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
/*
- * The enabling order will be from lower to higher indexed wells,
- * the disabling order is reversed.
+ * BSpec says this must be set, even though
+ * WaDisable4x2SubspanOptimization isn't listed for VLV.
*/
- if (IS_HASWELL(dev_priv->dev)) {
- set_power_wells(power_domains, hsw_power_wells);
- hsw_pwr = power_domains;
- } else if (IS_BROADWELL(dev_priv->dev)) {
- set_power_wells(power_domains, bdw_power_wells);
- hsw_pwr = power_domains;
- } else if (IS_CHERRYVIEW(dev_priv->dev)) {
- set_power_wells(power_domains, chv_power_wells);
- } else if (IS_VALLEYVIEW(dev_priv->dev)) {
- set_power_wells(power_domains, vlv_power_wells);
- } else {
- set_power_wells(power_domains, i9xx_always_on_power_well);
- }
+ I915_WRITE(CACHE_MODE_1,
+ _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
- return 0;
-}
+ /*
+ * WaIncreaseL3CreditsForVLVB0:vlv
+ * This is the hardware default actually.
+ */
+ I915_WRITE(GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE);
-void intel_power_domains_remove(struct drm_i915_private *dev_priv)
-{
- hsw_pwr = NULL;
+ /*
+ * WaDisableVLVClockGating_VBIIssue:vlv
+ * Disable clock gating on th GCFG unit to prevent a delay
+ * in the reporting of vblank events.
+ */
+ I915_WRITE(VLV_GUNIT_CLOCK_GATE, GCFG_DIS);
}
-static void intel_power_domains_resume(struct drm_i915_private *dev_priv)
+static void cherryview_init_clock_gating(struct drm_device *dev)
{
- struct i915_power_domains *power_domains = &dev_priv->power_domains;
- struct i915_power_well *power_well;
- int i;
-
- mutex_lock(&power_domains->lock);
- for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
- power_well->ops->sync_hw(dev_priv, power_well);
- power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
- power_well);
- }
- mutex_unlock(&power_domains->lock);
-}
+ struct drm_i915_private *dev_priv = dev->dev_private;
-static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
-{
- struct i915_power_well *cmn =
- lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
- struct i915_power_well *disp2d =
- lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
+ I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
- /* nothing to do if common lane is already off */
- if (!cmn->ops->is_enabled(dev_priv, cmn))
- return;
+ I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
- /* If the display might be already active skip this */
- if (disp2d->ops->is_enabled(dev_priv, disp2d) &&
- I915_READ(DPIO_CTL) & DPIO_CMNRST)
- return;
+ /* WaVSRefCountFullforceMissDisable:chv */
+ /* WaDSRefCountFullforceMissDisable:chv */
+ I915_WRITE(GEN7_FF_THREAD_MODE,
+ I915_READ(GEN7_FF_THREAD_MODE) &
+ ~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
- DRM_DEBUG_KMS("toggling display PHY side reset\n");
+ /* WaDisableSemaphoreAndSyncFlipWait:chv */
+ I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
+ _MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
- /* cmnlane needs DPLL registers */
- disp2d->ops->enable(dev_priv, disp2d);
+ /* WaDisableCSUnitClockGating:chv */
+ I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) |
+ GEN6_CSUNIT_CLOCK_GATE_DISABLE);
- /*
- * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
- * Need to assert and de-assert PHY SB reset by gating the
- * common lane power, then un-gating it.
- * Simply ungating isn't enough to reset the PHY enough to get
- * ports and lanes running.
- */
- cmn->ops->disable(dev_priv, cmn);
+ /* WaDisableSDEUnitClockGating:chv */
+ I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
+ GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
}
-void intel_power_domains_init_hw(struct drm_i915_private *dev_priv)
+static void g4x_init_clock_gating(struct drm_device *dev)
{
- struct drm_device *dev = dev_priv->dev;
- struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dspclk_gate;
+
+ I915_WRITE(RENCLK_GATE_D1, 0);
+ I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
+ GS_UNIT_CLOCK_GATE_DISABLE |
+ CL_UNIT_CLOCK_GATE_DISABLE);
+ I915_WRITE(RAMCLK_GATE_D, 0);
+ dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
+ OVRUNIT_CLOCK_GATE_DISABLE |
+ OVCUNIT_CLOCK_GATE_DISABLE;
+ if (IS_GM45(dev))
+ dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
+ I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
- power_domains->initializing = true;
+ /* WaDisableRenderCachePipelinedFlush */
+ I915_WRITE(CACHE_MODE_0,
+ _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
- if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
- mutex_lock(&power_domains->lock);
- vlv_cmnlane_wa(dev_priv);
- mutex_unlock(&power_domains->lock);
- }
+ /* WaDisable_RenderCache_OperationalFlush:g4x */
+ I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
- /* For now, we need the power well to be always enabled. */
- intel_display_set_init_power(dev_priv, true);
- intel_power_domains_resume(dev_priv);
- power_domains->initializing = false;
+ g4x_disable_trickle_feed(dev);
}
-void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv)
+static void crestline_init_clock_gating(struct drm_device *dev)
{
- intel_runtime_pm_get(dev_priv);
-}
+ struct drm_i915_private *dev_priv = dev->dev_private;
-void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv)
-{
- intel_runtime_pm_put(dev_priv);
+ I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
+ I915_WRITE(RENCLK_GATE_D2, 0);
+ I915_WRITE(DSPCLK_GATE_D, 0);
+ I915_WRITE(RAMCLK_GATE_D, 0);
+ I915_WRITE16(DEUC, 0);
+ I915_WRITE(MI_ARB_STATE,
+ _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
+
+ /* WaDisable_RenderCache_OperationalFlush:gen4 */
+ I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
}
-void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
+static void broadwater_init_clock_gating(struct drm_device *dev)
{
- struct drm_device *dev = dev_priv->dev;
- struct device *device = &dev->pdev->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
- if (!HAS_RUNTIME_PM(dev))
- return;
+ I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
+ I965_RCC_CLOCK_GATE_DISABLE |
+ I965_RCPB_CLOCK_GATE_DISABLE |
+ I965_ISC_CLOCK_GATE_DISABLE |
+ I965_FBC_CLOCK_GATE_DISABLE);
+ I915_WRITE(RENCLK_GATE_D2, 0);
+ I915_WRITE(MI_ARB_STATE,
+ _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
- pm_runtime_get_sync(device);
- WARN(dev_priv->pm.suspended, "Device still suspended.\n");
+ /* WaDisable_RenderCache_OperationalFlush:gen4 */
+ I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
}
-void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
+static void gen3_init_clock_gating(struct drm_device *dev)
{
- struct drm_device *dev = dev_priv->dev;
- struct device *device = &dev->pdev->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dstate = I915_READ(D_STATE);
- if (!HAS_RUNTIME_PM(dev))
- return;
+ dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
+ DSTATE_DOT_CLOCK_GATING;
+ I915_WRITE(D_STATE, dstate);
+
+ if (IS_PINEVIEW(dev))
+ I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
+
+ /* IIR "flip pending" means done if this bit is set */
+ I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
+
+ /* interrupts should cause a wake up from C3 */
+ I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN));
+
+ /* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+ I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
- WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n");
- pm_runtime_get_noresume(device);
+ I915_WRITE(MI_ARB_STATE,
+ _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
}
-void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
+static void i85x_init_clock_gating(struct drm_device *dev)
{
- struct drm_device *dev = dev_priv->dev;
- struct device *device = &dev->pdev->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
- if (!HAS_RUNTIME_PM(dev))
- return;
+ I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
+
+ /* interrupts should cause a wake up from C3 */
+ I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) |
+ _MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE));
- pm_runtime_mark_last_busy(device);
- pm_runtime_put_autosuspend(device);
+ I915_WRITE(MEM_MODE,
+ _MASKED_BIT_ENABLE(MEM_DISPLAY_TRICKLE_FEED_DISABLE));
}
-void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
+static void i830_init_clock_gating(struct drm_device *dev)
{
- struct drm_device *dev = dev_priv->dev;
- struct device *device = &dev->pdev->dev;
-
- if (!HAS_RUNTIME_PM(dev))
- return;
+ struct drm_i915_private *dev_priv = dev->dev_private;
- pm_runtime_set_active(device);
+ I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
- /*
- * RPM depends on RC6 to save restore the GT HW context, so make RC6 a
- * requirement.
- */
- if (!intel_enable_rc6(dev)) {
- DRM_INFO("RC6 disabled, disabling runtime PM support\n");
- return;
- }
+ I915_WRITE(MEM_MODE,
+ _MASKED_BIT_ENABLE(MEM_DISPLAY_A_TRICKLE_FEED_DISABLE) |
+ _MASKED_BIT_ENABLE(MEM_DISPLAY_B_TRICKLE_FEED_DISABLE));
+}
- pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
- pm_runtime_mark_last_busy(device);
- pm_runtime_use_autosuspend(device);
+void intel_init_clock_gating(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
- pm_runtime_put_autosuspend(device);
+ dev_priv->display.init_clock_gating(dev);
}
-void intel_fini_runtime_pm(struct drm_i915_private *dev_priv)
+void intel_suspend_hw(struct drm_device *dev)
{
- struct drm_device *dev = dev_priv->dev;
- struct device *device = &dev->pdev->dev;
+ if (HAS_PCH_LPT(dev))
+ lpt_suspend_hw(dev);
+}
- if (!HAS_RUNTIME_PM(dev))
+static void intel_init_fbc(struct drm_i915_private *dev_priv)
+{
+ if (!HAS_FBC(dev_priv)) {
+ dev_priv->fbc.enabled = false;
return;
+ }
- if (!intel_enable_rc6(dev))
- return;
+ if (INTEL_INFO(dev_priv)->gen >= 7) {
+ dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
+ dev_priv->display.enable_fbc = gen7_enable_fbc;
+ dev_priv->display.disable_fbc = ironlake_disable_fbc;
+ } else if (INTEL_INFO(dev_priv)->gen >= 5) {
+ dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
+ dev_priv->display.enable_fbc = ironlake_enable_fbc;
+ dev_priv->display.disable_fbc = ironlake_disable_fbc;
+ } else if (IS_GM45(dev_priv)) {
+ dev_priv->display.fbc_enabled = g4x_fbc_enabled;
+ dev_priv->display.enable_fbc = g4x_enable_fbc;
+ dev_priv->display.disable_fbc = g4x_disable_fbc;
+ } else {
+ dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
+ dev_priv->display.enable_fbc = i8xx_enable_fbc;
+ dev_priv->display.disable_fbc = i8xx_disable_fbc;
+
+ /* This value was pulled out of someone's hat */
+ I915_WRITE(FBC_CONTROL, 500 << FBC_CTL_INTERVAL_SHIFT);
+ }
- /* Make sure we're not suspended first. */
- pm_runtime_get_sync(device);
- pm_runtime_disable(device);
+ dev_priv->fbc.enabled = dev_priv->display.fbc_enabled(dev_priv->dev);
}
/* Set up chip specific power management-related functions */
projects / cascardo / linux.git / commitdiff