#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/mii.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <asm/uaccess.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <mach/board.h>
-
-#include "at91_ether.h"
#include "macb.h"
#define DRV_NAME "at91_ether"
#define DRV_VERSION "1.0"
-#define LINK_POLL_INTERVAL (HZ)
-
-/* ........................... PHY INTERFACE ........................... */
-
-/*
- * Enable the MDIO bit in MAC control register
- * When not called from an interrupt-handler, access to the PHY must be
- * protected by a spinlock.
- */
-static void enable_mdi(struct macb *lp)
-{
- unsigned long ctl;
-
- ctl = macb_readl(lp, NCR);
- macb_writel(lp, NCR, ctl | MACB_BIT(MPE)); /* enable management port */
-}
-
-/*
- * Disable the MDIO bit in the MAC control register
- */
-static void disable_mdi(struct macb *lp)
-{
- unsigned long ctl;
-
- ctl = macb_readl(lp, NCR);
- macb_writel(lp, NCR, ctl & ~MACB_BIT(MPE)); /* disable management port */
-}
-
-/*
- * Wait until the PHY operation is complete.
- */
-static inline void at91_phy_wait(struct macb *lp)
-{
- unsigned long timeout = jiffies + 2;
-
- while (!(macb_readl(lp, NSR) & MACB_BIT(IDLE))) {
- if (time_after(jiffies, timeout)) {
- printk("at91_ether: MIO timeout\n");
- break;
- }
- cpu_relax();
- }
-}
-
-/*
- * Write value to the a PHY register
- * Note: MDI interface is assumed to already have been enabled.
- */
-static void write_phy(struct macb *lp, unsigned char phy_addr, unsigned char address, unsigned int value)
-{
- macb_writel(lp, MAN, MACB_BF(SOF, MACB_MAN_SOF) | MACB_BF(CODE, MACB_MAN_CODE)
- | MACB_BF(RW, MACB_MAN_WRITE) | ((phy_addr & 0x1f) << 23)
- | (address << 18) | (value & ((1<<MACB_DATA_SIZE) - 1)));
-
- /* Wait until IDLE bit in Network Status register is cleared */
- at91_phy_wait(lp);
-}
-
-/*
- * Read value stored in a PHY register.
- * Note: MDI interface is assumed to already have been enabled.
- */
-static void read_phy(struct macb *lp, unsigned char phy_addr, unsigned char address, unsigned int *value)
-{
- macb_writel(lp, MAN, MACB_BF(SOF, MACB_MAN_SOF) | MACB_BF(CODE, MACB_MAN_CODE)
- | MACB_BF(RW, MACB_MAN_READ) | ((phy_addr & 0x1f) << 23)
- | (address << 18));
-
- /* Wait until IDLE bit in Network Status register is cleared */
- at91_phy_wait(lp);
-
- *value = macb_readl(lp, MAN) & ((1<<MACB_DATA_SIZE) - 1);
-}
-
-/* ........................... PHY MANAGEMENT .......................... */
-
-/*
- * Access the PHY to determine the current link speed and mode, and update the
- * MAC accordingly.
- * If no link or auto-negotiation is busy, then no changes are made.
- */
-static void update_linkspeed(struct net_device *dev, int silent)
-{
- struct macb *lp = netdev_priv(dev);
- unsigned int bmsr, bmcr, lpa, mac_cfg;
- unsigned int speed, duplex;
-
- if (!mii_link_ok(&lp->mii)) { /* no link */
- netif_carrier_off(dev);
- if (!silent)
- printk(KERN_INFO "%s: Link down.\n", dev->name);
- return;
- }
-
- /* Link up, or auto-negotiation still in progress */
- read_phy(lp, lp->phy_address, MII_BMSR, &bmsr);
- read_phy(lp, lp->phy_address, MII_BMCR, &bmcr);
- if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
- if (!(bmsr & BMSR_ANEGCOMPLETE))
- return; /* Do nothing - another interrupt generated when negotiation complete */
-
- read_phy(lp, lp->phy_address, MII_LPA, &lpa);
- if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
- else speed = SPEED_10;
- if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL;
- else duplex = DUPLEX_HALF;
- } else {
- speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
- duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
- }
-
- /* Update the MAC */
- mac_cfg = macb_readl(lp, NCFGR) & ~(MACB_BIT(SPD) | MACB_BIT(FD));
- if (speed == SPEED_100) {
- if (duplex == DUPLEX_FULL) /* 100 Full Duplex */
- mac_cfg |= MACB_BIT(SPD) | MACB_BIT(FD);
- else /* 100 Half Duplex */
- mac_cfg |= MACB_BIT(SPD);
- } else {
- if (duplex == DUPLEX_FULL) /* 10 Full Duplex */
- mac_cfg |= MACB_BIT(FD);
- else {} /* 10 Half Duplex */
- }
- macb_writel(lp, NCFGR, mac_cfg);
-
- if (!silent)
- printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
- netif_carrier_on(dev);
-}
-
-/*
- * Handle interrupts from the PHY
- */
-static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct macb *lp = netdev_priv(dev);
- unsigned int phy;
-
- /*
- * This hander is triggered on both edges, but the PHY chips expect
- * level-triggering. We therefore have to check if the PHY actually has
- * an IRQ pending.
- */
- enable_mdi(lp);
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
- read_phy(lp, lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */
- if (!(phy & (1 << 0)))
- goto done;
- }
- else if (lp->phy_type == MII_LXT971A_ID) {
- read_phy(lp, lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */
- if (!(phy & (1 << 2)))
- goto done;
- }
- else if (lp->phy_type == MII_BCM5221_ID) {
- read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */
- if (!(phy & (1 << 0)))
- goto done;
- }
- else if (lp->phy_type == MII_KS8721_ID) {
- read_phy(lp, lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
- if (!(phy & ((1 << 2) | 1)))
- goto done;
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
- read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &phy);
- if (!(phy & ((1 << 2) | 1)))
- goto done;
- }
- else if (lp->phy_type == MII_DP83848_ID) {
- read_phy(lp, lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
- if (!(phy & (1 << 7)))
- goto done;
- }
-
- update_linkspeed(dev, 0);
-
-done:
- disable_mdi(lp);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Initialize and enable the PHY interrupt for link-state changes
- */
-static void enable_phyirq(struct net_device *dev)
-{
- struct macb *lp = netdev_priv(dev);
- unsigned int dsintr, irq_number;
- int status;
-
- if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
- /*
- * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
- * or board does not have it connected.
- */
- mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
- return;
- }
-
- irq_number = gpio_to_irq(lp->board_data.phy_irq_pin);
- status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
- if (status) {
- printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
- return;
- }
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
- read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr);
- dsintr = dsintr & ~0xf00; /* clear bits 8..11 */
- write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
- read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr);
- dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */
- write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr);
- }
- else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
- dsintr = (1 << 15) | ( 1 << 14);
- write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
- dsintr = (1 << 10) | ( 1 << 8);
- write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr);
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
- read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr);
- dsintr = dsintr | 0x500; /* set bits 8, 10 */
- write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr);
- }
- else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
- read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr);
- dsintr = dsintr | 0x3c; /* set bits 2..5 */
- write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr);
- read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr);
- dsintr = dsintr | 0x3; /* set bits 0,1 */
- write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr);
- }
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-}
-
-/*
- * Disable the PHY interrupt
- */
-static void disable_phyirq(struct net_device *dev)
-{
- struct macb *lp = netdev_priv(dev);
- unsigned int dsintr;
- unsigned int irq_number;
-
- if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
- del_timer_sync(&lp->check_timer);
- return;
- }
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
- read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr);
- dsintr = dsintr | 0xf00; /* set bits 8..11 */
- write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
- read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr);
- dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */
- write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr);
- }
- else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
- read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &dsintr);
- dsintr = ~(1 << 14);
- write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
- read_phy(lp, lp->phy_address, MII_TPISTATUS, &dsintr);
- dsintr = ~((1 << 10) | (1 << 8));
- write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr);
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
- read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr);
- dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
- write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr);
- }
- else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
- read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr);
- dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
- write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr);
- read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr);
- dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
- write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr);
- }
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- irq_number = gpio_to_irq(lp->board_data.phy_irq_pin);
- free_irq(irq_number, dev); /* Free interrupt handler */
-}
-
-/*
- * Perform a software reset of the PHY.
- */
-#if 0
-static void reset_phy(struct net_device *dev)
-{
- struct macb *lp = netdev_priv(dev);
- unsigned int bmcr;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- /* Perform PHY reset */
- write_phy(lp, lp->phy_address, MII_BMCR, BMCR_RESET);
-
- /* Wait until PHY reset is complete */
- do {
- read_phy(lp, lp->phy_address, MII_BMCR, &bmcr);
- } while (!(bmcr & BMCR_RESET));
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-}
-#endif
-
-static void at91ether_check_link(unsigned long dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct macb *lp = netdev_priv(dev);
-
- enable_mdi(lp);
- update_linkspeed(dev, 1);
- disable_mdi(lp);
-
- mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
-}
-
-/*
- * Perform any PHY-specific initialization.
- */
-static void __init initialize_phy(struct macb *lp)
-{
- unsigned int val;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
- read_phy(lp, lp->phy_address, MII_DSCR_REG, &val);
- if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */
- lp->phy_media = PORT_FIBRE;
- } else if (machine_is_csb337()) {
- /* mix link activity status into LED2 link state */
- write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x0d22);
- } else if (machine_is_ecbat91())
- write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x156A);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-}
-
/* ......................... ADDRESS MANAGEMENT ........................ */
/*
macb_writel(lp, NCFGR, cfg);
}
-/* ......................... ETHTOOL SUPPORT ........................... */
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
- struct macb *lp = netdev_priv(dev);
- unsigned int value;
-
- read_phy(lp, phy_id, location, &value);
- return value;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
-{
- struct macb *lp = netdev_priv(dev);
-
- write_phy(lp, phy_id, location, value);
-}
-
-static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct macb *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- ret = mii_ethtool_gset(&lp->mii, cmd);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */
- cmd->supported = SUPPORTED_FIBRE;
- cmd->port = PORT_FIBRE;
- }
-
- return ret;
-}
-
-static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct macb *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- ret = mii_ethtool_sset(&lp->mii, cmd);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- return ret;
-}
-
-static int at91ether_nwayreset(struct net_device *dev)
-{
- struct macb *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- ret = mii_nway_restart(&lp->mii);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- return ret;
-}
-
-static void at91ether_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
- strlcpy(info->version, DRV_VERSION, sizeof(info->version));
- strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
-}
-
-static const struct ethtool_ops at91ether_ethtool_ops = {
- .get_settings = at91ether_get_settings,
- .set_settings = at91ether_set_settings,
- .get_drvinfo = at91ether_get_drvinfo,
- .nway_reset = at91ether_nwayreset,
- .get_link = ethtool_op_get_link,
-};
-
-static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct macb *lp = netdev_priv(dev);
- int res;
-
- if (!netif_running(dev))
- return -EINVAL;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
- res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- return res;
-}
-
/* ................................ MAC ................................ */
/*
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
- clk_enable(lp->pclk); /* Re-enable Peripheral clock */
-
/* Clear internal statistics */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));
/* Update the MAC address (incase user has changed it) */
update_mac_address(dev);
- /* Enable PHY interrupt */
- enable_phyirq(dev);
-
/* Enable MAC interrupts */
macb_writel(lp, IER, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
| MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE) | MACB_BIT(TCOMP)
| MACB_BIT(ISR_ROVR) | MACB_BIT(HRESP));
- /* Determine current link speed */
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
- update_linkspeed(dev, 0);
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
at91ether_start(dev);
+
+ /* schedule a link state check */
+ phy_start(lp->phy_dev);
+
netif_start_queue(dev);
+
return 0;
}
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));
- /* Disable PHY interrupt */
- disable_phyirq(dev);
-
/* Disable MAC interrupts */
macb_writel(lp, IDR, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
| MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)
netif_stop_queue(dev);
- clk_disable(lp->pclk); /* Disable Peripheral clock */
-
return 0;
}
.ndo_get_stats = at91ether_stats,
.ndo_set_rx_mode = at91ether_set_multicast_list,
.ndo_set_mac_address = set_mac_address,
- .ndo_do_ioctl = at91ether_ioctl,
+ .ndo_do_ioctl = macb_ioctl,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
#endif
};
-/*
- * Detect the PHY type, and its address.
- */
-static int __init at91ether_phy_detect(struct macb *lp)
-{
- unsigned int phyid1, phyid2;
- unsigned long phy_id;
- unsigned short phy_address = 0;
-
- while (phy_address < PHY_MAX_ADDR) {
- /* Read the PHY ID registers */
- enable_mdi(lp);
- read_phy(lp, phy_address, MII_PHYSID1, &phyid1);
- read_phy(lp, phy_address, MII_PHYSID2, &phyid2);
- disable_mdi(lp);
-
- phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
- switch (phy_id) {
- case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
- case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
- case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
- case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
- case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
- case MII_DP83847_ID: /* National Semiconductor DP83847: */
- case MII_DP83848_ID: /* National Semiconductor DP83848: */
- case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
- case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
- case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
- case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
- /* store detected values */
- lp->phy_type = phy_id; /* Type of PHY connected */
- lp->phy_address = phy_address; /* MDI address of PHY */
- return 1;
- }
-
- phy_address++;
- }
-
- return 0; /* not detected */
-}
-
-
/*
* Detect MAC & PHY and perform ethernet interface initialization
*/
struct macb_platform_data *board_data = pdev->dev.platform_data;
struct resource *regs;
struct net_device *dev;
+ struct phy_device *phydev;
struct macb *lp;
int res;
return -ENOMEM;
lp = netdev_priv(dev);
+ lp->pdev = pdev;
+ lp->dev = dev;
lp->board_data = *board_data;
spin_lock_init(&lp->lock);
ether_setup(dev);
dev->netdev_ops = &at91ether_netdev_ops;
- dev->ethtool_ops = &at91ether_ethtool_ops;
+ dev->ethtool_ops = &macb_ethtool_ops;
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
macb_writel(lp, NCR, 0);
- if (board_data->is_rmii)
+ if (board_data->is_rmii) {
macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG) | MACB_BIT(RM9200_RMII));
- else
+ lp->phy_interface = PHY_INTERFACE_MODE_RMII;
+ } else {
macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG));
-
- /* Detect PHY */
- if (!at91ether_phy_detect(lp)) {
- printk(KERN_ERR "at91_ether: Could not detect ethernet PHY\n");
- res = -ENODEV;
- goto err_free_dmamem;
+ lp->phy_interface = PHY_INTERFACE_MODE_MII;
}
- initialize_phy(lp);
-
- lp->mii.dev = dev; /* Support for ethtool */
- lp->mii.mdio_read = mdio_read;
- lp->mii.mdio_write = mdio_write;
- lp->mii.phy_id = lp->phy_address;
- lp->mii.phy_id_mask = 0x1f;
- lp->mii.reg_num_mask = 0x1f;
-
/* Register the network interface */
res = register_netdev(dev);
if (res)
goto err_free_dmamem;
- /* Determine current link speed */
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
- update_linkspeed(dev, 0);
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
+ if (macb_mii_init(lp) != 0)
+ goto err_out_unregister_netdev;
+
netif_carrier_off(dev); /* will be enabled in open() */
- /* If board has no PHY IRQ, use a timer to poll the PHY */
- if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
- gpio_request(board_data->phy_irq_pin, "ethernet_phy");
- } else {
- /* If board has no PHY IRQ, use a timer to poll the PHY */
- init_timer(&lp->check_timer);
- lp->check_timer.data = (unsigned long)dev;
- lp->check_timer.function = at91ether_check_link;
- }
+ phydev = lp->phy_dev;
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
/* Display ethernet banner */
printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
macb_readl(lp, NCFGR) & MACB_BIT(SPD) ? "100-" : "10-",
macb_readl(lp, NCFGR) & MACB_BIT(FD) ? "FullDuplex" : "HalfDuplex",
dev->dev_addr);
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
- printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
- else if (lp->phy_type == MII_LXT971A_ID)
- printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name);
- else if (lp->phy_type == MII_RTL8201_ID)
- printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name);
- else if (lp->phy_type == MII_BCM5221_ID)
- printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
- else if (lp->phy_type == MII_DP83847_ID)
- printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
- else if (lp->phy_type == MII_DP83848_ID)
- printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- else if (lp->phy_type == MII_AC101L_ID)
- printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
- else if (lp->phy_type == MII_KS8721_ID)
- printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
- else if (lp->phy_type == MII_T78Q21x3_ID)
- printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
- else if (lp->phy_type == MII_LAN83C185_ID)
- printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
-
- clk_disable(lp->pclk); /* Disable Peripheral clock */
return 0;
-
+err_out_unregister_netdev:
+ unregister_netdev(dev);
err_free_dmamem:
platform_set_drvdata(pdev, NULL);
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
struct net_device *dev = platform_get_drvdata(pdev);
struct macb *lp = netdev_priv(dev);
- if (gpio_is_valid(lp->board_data.phy_irq_pin))
- gpio_free(lp->board_data.phy_irq_pin);
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ mdiobus_unregister(lp->mii_bus);
+ kfree(lp->mii_bus->irq);
+ mdiobus_free(lp->mii_bus);
unregister_netdev(dev);
free_irq(dev->irq, dev);
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
+ iounmap(lp->regs);
+ clk_disable(lp->pclk);
clk_put(lp->pclk);
-
- platform_set_drvdata(pdev, NULL);
free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
struct macb *lp = netdev_priv(net_dev);
if (netif_running(net_dev)) {
- if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
- int phy_irq = gpio_to_irq(lp->board_data.phy_irq_pin);
- disable_irq(phy_irq);
- }
-
netif_stop_queue(net_dev);
netif_device_detach(net_dev);
netif_device_attach(net_dev);
netif_start_queue(net_dev);
-
- if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
- int phy_irq = gpio_to_irq(lp->board_data.phy_irq_pin);
- enable_irq(phy_irq);
- }
}
return 0;
}
projects / cascardo / linux.git / commitdiff