Add device tree file for the armadeus apf27
authorPhilippe Reynes <tremyfr@yahoo.fr>
Mon, 12 Nov 2012 20:28:33 +0000 (21:28 +0100)
committerSascha Hauer <s.hauer@pengutronix.de>
Fri, 16 Nov 2012 08:12:00 +0000 (09:12 +0100)
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/arm/boot/dts/imx27-apf27.dts [new file with mode: 0644]

diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
new file mode 100644 (file)
index 0000000..c0327c0
--- /dev/null
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+       model = "Armadeus Systems APF27 module";
+       compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+       memory {
+               reg = <0xa0000000 0x04000000>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               osc26m {
+                       compatible = "fsl,imx-osc26m", "fixed-clock";
+                       clock-frequency = <0>;
+               };
+       };
+
+       soc {
+               aipi@10000000 {
+                       serial@1000a000 {
+                               status = "okay";
+                       };
+
+                       ethernet@1002b000 {
+                               status = "okay";
+                       };
+               };
+
+               nand@d8000000 {
+                       status = "okay";
+                       nand-bus-width = <16>;
+                       nand-ecc-mode = "hw";
+                       nand-on-flash-bbt;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x100000>;
+                       };
+
+                       partition@100000 {
+                               label = "env";
+                               reg = <0x100000 0x80000>;
+                       };
+
+                       partition@180000 {
+                               label = "env2";
+                               reg = <0x180000 0x80000>;
+                       };
+
+                       partition@200000 {
+                               label = "firmware";
+                               reg = <0x200000 0x80000>;
+                       };
+
+                       partition@280000 {
+                               label = "dtb";
+                               reg = <0x280000 0x80000>;
+                       };
+
+                       partition@300000 {
+                               label = "kernel";
+                               reg = <0x300000 0x500000>;
+                       };
+
+                       partition@800000 {
+                               label = "rootfs";
+                               reg = <0x800000 0xf800000>;
+                       };
+               };
+       };
+};