git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
+ - Note that it is highly important to install the mke2fs.conf file
+ that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
+ you have edited the /etc/mke2fs.conf file installed on your system,
+ you will need to merge your changes with the version from e2fsprogs
+ 1.41.x.
+
- Create a new filesystem using the ext4dev filesystem type:
# mke2fs -t ext4dev /dev/hda1
fork. So if you have any comments or updates for this file, please try
to update the original English file first.
-Last Updated: 2007/11/16
+Last Updated: 2008/08/21
==================================
これは、
-linux-2.6.24/Documentation/HOWTO
+linux-2.6.27/Documentation/HOWTO
の和訳です。
翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2007/11/10
+翻訳日： 2008/8/5
翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
校正者： 松倉さん <nbh--mats at nifty dot com>
小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
に安定した状態にあると判断したときにリリースされます。目標は毎週新
しい -rc カーネルをリリースすることです。
- - 以下の URL で各 -rc リリースに存在する既知の後戻り問題のリスト
- が追跡されます-
- http://kernelnewbies.org/known_regressions
-
- このプロセスはカーネルが 「準備ができた」と考えられるまで継続しま
す。このプロセスはだいたい 6週間継続します。
+ - 各リリースでの既知の後戻り問題(regression: このリリースの中で新規
+ に作り込まれた問題を指す) はその都度 Linux-kernel メーリングリスト
+ に投稿されます。ゴールとしては、カーネルが 「準備ができた」と宣言
+ する前にこのリストの長さをゼロに減らすことですが、現実には、数個の
+ 後戻り問題がリリース時にたびたび残ってしまいます。
+
Andrew Morton が Linux-kernel メーリングリストにカーネルリリースについ
て書いたことをここで言っておくことは価値があります-
「カーネルがいつリリースされるかは誰も知りません。なぜなら、これは現
2.6.x.y -stable カーネルツリー
---------------------------
-バージョンに4つ目の数字がついたカーネルは -stable カーネルです。これに
-ã\81¯ã\80\812.6.x ã\82«ã\83¼ã\83\8dã\83«ã\81§è¦\8bã\81¤ã\81\8bã\81£ã\81\9fã\82»ã\82ã\83¥ã\83ªã\83\86ã\82£å\95\8fé¡\8cã\82\84é\87\8d大ã\81ªå¾\8cæ\88»ã\82\8aã\81«å¯¾ã\81\99ã\82\8bæ¯\94
-較的小さい重要な修正が含まれます。
+バージョン番号が4つの数字に分かれているカーネルは -stable カーネルです。
+ã\81\93ã\82\8cã\81«ã\81¯ã\80\812.6.x ã\82«ã\83¼ã\83\8dã\83«ã\81§è¦\8bã\81¤ã\81\8bã\81£ã\81\9fã\82»ã\82ã\83¥ã\83ªã\83\86ã\82£å\95\8fé¡\8cã\82\84é\87\8d大ã\81ªå¾\8cæ\88»ã\82\8aã\81«å¯¾
+する比較的小さい重要な修正が含まれます。
これは、開発/実験的バージョンのテストに協力することに興味が無く、
最新の安定したカーネルを使いたいユーザに推奨するブランチです。
-もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x
-が最新の安定版カーネルです。
+もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が
+最新の安定版カーネルです。
-2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、だ
-いたい隔週でリリースされています。
+2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
+た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
+の場合はこれに対してだいたいの場合、すぐにリリースがされます。
カーネルツリーに入っている、Documentation/stable_kernel_rules.txt ファ
イルにはどのような種類の変更が -stable ツリーに受け入れ可能か、またリ
メインラインへ入れるように Linus にプッシュします。
メインカーネルツリーに含めるために Linus に送る前に、すべての新しいパッ
-チが -mm ツリーでテストされることが強く推奨されます。
+チが -mm ツリーでテストされることが強く推奨されています。マージウィン
+ドウが開く前に -mm ツリーに現れなかったパッチはメインラインにマージさ
+れることは困難になります。
これらのカーネルは安定して動作すべきシステムとして使うのには適切ではあ
りませんし、カーネルブランチの中でももっとも動作にリスクが高いものです。
- pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
- - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+ - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+ - x86, Ingo Molnar <mingo@elte.hu>
+ git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+
quilt ツリー-
- - USB, PCI ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
+ - USB, ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
- - x86-64 と i386 の仲間 Andi Kleen <ak@suse.de>
その他のカーネルツリーは http://git.kernel.org/ と MAINTAINERS ファ
イルに一覧表があります。
bugzilla.kernel.org は Linux カーネル開発者がカーネルのバグを追跡する
場所です。ユーザは見つけたバグの全てをこのツールで報告すべきです。
どう kernel bugzilla を使うかの詳細は、以下を参照してください-
- http://test.kernel.org/bugzilla/faq.html
-
+ http://bugzilla.kernel.org/page.cgi?id=faq.html
メインカーネルソースディレクトリにあるファイル REPORTING-BUGS はカーネ
ルバグらしいものについてどうレポートするかの良いテンプレートであり、問
題の追跡を助けるためにカーネル開発者にとってどんな情報が必要なのかの詳
細が書かれています。
+バグレポートの管理
+-------------------
+
+あなたのハッキングのスキルを訓練する最高の方法のひとつに、他人がレポー
+トしたバグを修正することがあります。あなたがカーネルをより安定化させる
+こに寄与するということだけでなく、あなたは 現実の問題を修正することを
+学び、自分のスキルも強化でき、また他の開発者があなたの存在に気がつき
+ます。バグを修正することは、多くの開発者の中から自分が功績をあげる最善
+の道です、なぜなら多くの人は他人のバグの修正に時間を浪費することを好ま
+ないからです。
+
+すでにレポートされたバグのために仕事をするためには、
+http://bugzilla.kernel.org に行ってください。もし今後のバグレポートに
+ついてアドバイスを受けたいのであれば、bugme-new メーリングリスト(新し
+いバグレポートだけがここにメールされる) または bugme-janitor メーリン
+グリスト(bugzilla の変更毎にここにメールされる)を購読できます。
+
+ http://lists.linux-foundation.org/mailman/listinfo/bugme-new
+ http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
+
メーリングリスト
-------------
--- /dev/null
+NOTE:
+This is a version of Documentation/SubmitChecklist into Japanese.
+This document is maintained by Takenori Nagano <t-nagano@ah.jp.nec.com>
+and the JF Project team <http://www.linux.or.jp/JF/>.
+If you find any difference between this document and the original file
+or a problem with the translation,
+please contact the maintainer of this file or JF project.
+
+Please also note that the purpose of this file is to be easier to read
+for non English (read: Japanese) speakers and is not intended as a
+fork. So if you have any comments or updates of this file, please try
+to update the original English file first.
+
+Last Updated: 2008/07/14
+==================================
+これは、
+linux-2.6.26/Documentation/SubmitChecklist の和訳です。
+
+翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳日： 2008/07/14
+翻訳者： Takenori Nagano <t-nagano at ah dot jp dot nec dot com>
+校正者： Masanori Kobayashi さん <zap03216 at nifty dot ne dot jp>
+==================================
+
+
+Linux カーネルパッチ投稿者向けチェックリスト
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+本書では、パッチをより素早く取り込んでもらいたい開発者が実践すべき基本的な事柄
+をいくつか紹介します。ここにある全ての事柄は、Documentation/SubmittingPatches
+などのLinuxカーネルパッチ投稿に際しての心得を補足するものです。
+
+ 1: 妥当なCONFIGオプションや変更されたCONFIGオプション、つまり =y, =m, =n
+ 全てで正しくビルドできることを確認してください。その際、gcc及びリンカが
+ warningやerrorを出していないことも確認してください。
+
+ 2: allnoconfig, allmodconfig オプションを用いて正しくビルドできることを
+ 確認してください。
+
+ 3: 手許のクロスコンパイルツールやOSDLのPLMのようなものを用いて、複数の
+ アーキテクチャにおいても正しくビルドできることを確認してください。
+
+ 4: 64bit長の'unsigned long'を使用しているppc64は、クロスコンパイルでの
+ チェックに適当なアーキテクチャです。
+
+ 5: カーネルコーディングスタイルに準拠しているかどうか確認してください(!)
+
+ 6: CONFIGオプションの追加・変更をした場合には、CONFIGメニューが壊れていない
+ ことを確認してください。
+
+ 7: 新しくKconfigのオプションを追加する際には、必ずそのhelpも記述してください。
+
+ 8: 適切なKconfigの依存関係を考えながら慎重にチェックしてください。
+ ただし、この作業はマシンを使ったテストできちんと行うのがとても困難です。
+ うまくやるには、自分の頭で考えることです。
+
+ 9: sparseを利用してちゃんとしたコードチェックをしてください。
+
+10: 'make checkstack' と 'make namespacecheck' を利用し、問題が発見されたら
+ 修正してください。'make checkstack' は明示的に問題を示しませんが、どれか
+ １つの関数が512バイトより大きいスタックを使っていれば、修正すべき候補と
+ なります。
+
+11: グローバルなkernel API を説明する kernel-doc をソースの中に含めてください。
+ ( staticな関数においては必須ではありませんが、含めてもらっても結構です )
+ そして、'make htmldocs' もしくは 'make mandocs' を利用して追記した
+ ドキュメントのチェックを行い、問題が見つかった場合には修正を行ってください。
+
+12: CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT, CONFIG_DEBUG_SLAB,
+ CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES, CONFIG_DEBUG_SPINLOCK,
+ CONFIG_DEBUG_SPINLOCK_SLEEP これら全てを同時に有効にして動作確認を
+ 行ってください。
+
+13: CONFIG_SMP, CONFIG_PREEMPT を有効にした場合と無効にした場合の両方で
+ ビルドした上、動作確認を行ってください。
+
+14: もしパッチがディスクのI/O性能などに影響を与えるようであれば、
+ 'CONFIG_LBD'オプションを有効にした場合と無効にした場合の両方で
+ テストを実施してみてください。
+
+15: lockdepの機能を全て有効にした上で、全てのコードパスを評価してください。
+
+16: /proc に新しいエントリを追加した場合には、Documentation/ 配下に
+ 必ずドキュメントを追加してください。
+
+17: 新しいブートパラメータを追加した場合には、
+ 必ずDocumentation/kernel-parameters.txt に説明を追加してください。
+
+18: 新しくmoduleにパラメータを追加した場合には、MODULE_PARM_DESC()を
+ 利用して必ずその説明を記述してください。
+
+19: 新しいuserspaceインタフェースを作成した場合には、Documentation/ABI/ に
+ Documentation/ABI/README を参考にして必ずドキュメントを追加してください。
+
+20: 'make headers_check'を実行して全く問題がないことを確認してください。
+
+21: 少なくともslabアロケーションとpageアロケーションに失敗した場合の
+ 挙動について、fault-injectionを利用して確認してください。
+ Documentation/fault-injection/ を参照してください。
+
+ 追加したコードがかなりの量であったならば、サブシステム特有の
+ fault-injectionを追加したほうが良いかもしれません。
+
+22: 新たに追加したコードは、`gcc -W'でコンパイルしてください。
+ このオプションは大量の不要なメッセージを出力しますが、
+ "warning: comparison between signed and unsigned" のようなメッセージは、
+ バグを見つけるのに役に立ちます。
+
+23: 投稿したパッチが -mm パッチセットにマージされた後、全ての既存のパッチや
+ VM, VFS およびその他のサブシステムに関する様々な変更と、現時点でも共存
+ できることを確認するテストを行ってください。
* [no]ncq: Turn on or off NCQ.
+ * nohrst, nosrst, norst: suppress hard, soft
+ and both resets.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
ret = amba_device_register(d, &dev->resource);
if (ret) {
- dev_err(&d->dev, "unable to register device: %d\n");
+ dev_err(&d->dev, "unable to register device: %d\n", ret);
kfree(d);
}
}
static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
{
- I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+ I2C_BOARD_INFO("isl1208", 0x6f),
},
};
{
DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
- int i;
ixp4xx_sys_init();
f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
if (f) {
#ifdef __ARMEB__
+ int i;
for (i = 0; i < 6; i++) {
fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
list_add(&clks[i].node, &clocks);
mutex_unlock(&clocks_mutex);
}
+
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+ struct device *dev)
+{
+ struct clk *r = clk_lookup(dev, id);
+ struct clk *new;
+
+ if (!r)
+ return -ENODEV;
+
+ new = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+ if (!new)
+ return -ENOMEM;
+
+ new->name = alias;
+ new->dev = alias_dev;
+ new->other = r;
+
+ mutex_lock(&clocks_mutex);
+ list_add(&new->node, &clocks);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+#include <linux/list.h>
+
struct clk;
struct clkops {
#endif
void clks_register(struct clk *clks, size_t num);
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+ struct device *dev);
+
*
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
#include "generic.h"
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+static unsigned long e400_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
/* Only e800 has 128MB RAM */
static void __init eseries_fixup(struct machine_desc *desc,
- struct tag *tags, char **cmdline, struct meminfo *mi)
+ struct tag *tags, char **cmdline, struct meminfo *mi)
{
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].size = (64*1024*1024);
}
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+}
+
+static void __init e400_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+}
+
/* e-series machine definitions */
#ifdef CONFIG_MACH_E330
MACHINE_START(E330, "Toshiba e330")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E350
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E740
MACHINE_START(E740, "Toshiba e740")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e740_init,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E750
MACHINE_START(E750, "Toshiba e750")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E400
MACHINE_START(E400, "Toshiba e400")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e400_init,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E800
MACHINE_START(E800, "Toshiba e800")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
defined(CONFIG_MACH_TOSA) || \
defined(CONFIG_MACH_MAINSTONE) || \
defined(CONFIG_MACH_PCM027) || \
+ defined(CONFIG_ARCH_PXA_ESERIES) || \
defined(CONFIG_MACH_MAGICIAN)
#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_MACH_ZYLONITE)
#include <mach/mmc.h>
#include "generic.h"
+#include "clock.h"
#include "devices.h"
static unsigned long lubbock_pin_config[] __initdata = {
pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+ clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
;
/*
- * PXA 2xx clock declarations. Order is important (see aliases below)
- * Please be careful not to disrupt the ordering.
+ * PXA 2xx clock declarations.
*/
static struct clk pxa25x_clks[] = {
INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
-static struct clk pxa2xx_clk_aliases[] = {
- INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
- INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
-};
-
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
if (cpu_is_pxa255())
ret = platform_device_register(&pxa_device_hwuart);
- clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
-
return ret;
}
};
static struct clk pxa310_clks[] = {
+#ifdef CONFIG_CPU_PXA310
PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+#endif
};
static int __init pxa300_init(void)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <linux/version.h>
-
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/timer_defs.h>
#define SUPPORT_SYSRQ
#endif
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/serial.h>
#include <linux/circ_buf.h>
*
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri May 30 09:49:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 19:43:29 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_MACHCHK_WARNING=y
CONFIG_QDIO=y
# CONFIG_QDIO_DEBUG is not set
+CONFIG_CHSC_SCH=m
#
# Misc
# CONFIG_IPL_TAPE is not set
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
CONFIG_KEXEC=y
# CONFIG_ZFCPDUMP is not set
CONFIG_S390_GUEST=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=y
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
+CONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
# CONFIG_WAN is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_S390_VMUR=m
# CONFIG_POWER_SUPPLY is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
CONFIG_CRC7=m
* __ffz_word returns __BITOPS_WORDSIZE
* if no zero bit is present in the word.
*/
- set = __ffz_word(0, *p >> bit) + bit;
+ set = __ffz_word(bit, *p >> bit);
if (set >= size)
return size + offset;
if (set < __BITOPS_WORDSIZE)
* s390 version of ffz returns __BITOPS_WORDSIZE
* if no zero bit is present in the word.
*/
- set = ffz(__load_ulong_le(p, 0) >> bit) + bit;
+ set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
if (set >= size)
return size + offset;
if (set < __BITOPS_WORDSIZE)
* s390 version of ffz returns __BITOPS_WORDSIZE
* if no zero bit is present in the word.
*/
- set = ffs(__load_ulong_le(p, 0) >> bit) + bit;
+ set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
if (set >= size)
return size + offset;
if (set < __BITOPS_WORDSIZE)
return sf->gprs[8];
}
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = {
+ .lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock)
+};
static int s390_idle_enter(void)
{
if (IS_ERR(p))
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
current_set[cpu] = p;
- spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock);
}
static int __cpuinit smp_alloc_lowcore(int cpu)
current_set[0] = current;
smp_cpu_state[0] = CPU_STATE_CONFIGURED;
smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
- spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
}
void __init smp_cpus_done(unsigned int max_cpus)
u8 *target;
tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
- target = (iommu->cmd_buf + tail);
+ target = iommu->cmd_buf + tail;
memcpy_toio(target, cmd, sizeof(*cmd));
tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
switch (c->x86_vendor) {
case X86_VENDOR_INTEL:
- if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+ /*
+ * There is a known erratum on Pentium III and Core Solo
+ * and Core Duo CPUs.
+ * " Page with PAT set to WC while associated MTRR is UC
+ * may consolidate to UC "
+ * Because of this erratum, it is better to stick with
+ * setting WC in MTRR rather than using PAT on these CPUs.
+ *
+ * Enable PAT WC only on P4, Core 2 or later CPUs.
+ */
+ if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
return;
- break;
+
+ pat_disable("PAT WC disabled due to known CPU erratum.");
+ return;
+
case X86_VENDOR_AMD:
case X86_VENDOR_CENTAUR:
case X86_VENDOR_TRANSMETA:
setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
}
-static void __cpuinit set_cx86_inc(void)
-{
- unsigned char ccr3;
-
- printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
-
- ccr3 = getCx86(CX86_CCR3);
- setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- /* PCR1 -- Performance Control */
- /* Incrementor on, whatever that is */
- setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
- /* PCR0 -- Performance Control */
- /* Incrementor Margin 10 */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
- setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
-}
-
/*
* Configure later MediaGX and/or Geode processor.
*/
set_cx86_memwb();
set_cx86_reorder();
- set_cx86_inc();
local_irq_restore(flags);
}
unsigned long *size, mtrr_type *type)
{
unsigned int mask_lo, mask_hi, base_lo, base_hi;
+ unsigned int tmp, hi;
rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
if ((mask_lo & 0x800) == 0) {
rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
/* Work out the shifted address mask. */
- mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
- | mask_lo >> PAGE_SHIFT;
+ tmp = mask_hi << (32 - PAGE_SHIFT) | mask_lo >> PAGE_SHIFT;
+ mask_lo = size_or_mask | tmp;
+ /* Expand tmp with high bits to all 1s*/
+ hi = fls(tmp);
+ if (hi > 0) {
+ tmp |= ~((1<<(hi - 1)) - 1);
+
+ if (tmp != mask_lo) {
+ static int once = 1;
+
+ if (once) {
+ printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+ once = 0;
+ }
+ mask_lo = tmp;
+ }
+ }
/* This works correctly if size is a power of two, i.e. a
contiguous range. */
/* kvm/qemu doesn't have mtrr set right, don't trim them all */
if (!highest_pfn) {
- if (!kvm_para_available()) {
- printk(KERN_WARNING
+ WARN(!kvm_para_available(), KERN_WARNING
"WARNING: strange, CPU MTRRs all blank?\n");
- WARN_ON(1);
- }
return 0;
}
sn_rtc_cycles_per_second = ticks_per_sec;
}
-static __init void uv_system_init(void)
+static bool uv_system_inited;
+
+void __init uv_system_init(void)
{
union uvh_si_addr_map_config_u m_n_config;
union uvh_node_id_u node_id;
map_mmr_high(max_pnode);
map_config_high(max_pnode);
map_mmioh_high(max_pnode);
+ uv_system_inited = true;
}
/*
*/
void __cpuinit uv_cpu_init(void)
{
- if (!uv_node_to_blade)
- uv_system_init();
+ BUG_ON(!uv_system_inited);
uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
}
-void __init numaq_tsc_disable(void)
+void __cpuinit numaq_tsc_disable(void)
{
if (!found_numaq)
return;
.spin_unlock = __ticket_spin_unlock,
#endif
};
-EXPORT_SYMBOL_GPL(pv_lock_ops);
+EXPORT_SYMBOL(pv_lock_ops);
EXPORT_SYMBOL_GPL(pv_time_ops);
EXPORT_SYMBOL (pv_cpu_ops);
/* were we called with bad_dma_address? */
badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
- printk(KERN_ERR "Calgary: driver tried unmapping bad DMA "
+ WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
"address 0x%Lx\n", dma_addr);
- WARN_ON(1);
return;
}
static int __init build_detail_arrays(void)
{
unsigned long ptr;
- int i, scal_detail_size, rio_detail_size;
+ unsigned numnodes, i;
+ int scal_detail_size, rio_detail_size;
- if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+ numnodes = rio_table_hdr->num_scal_dev;
+ if (numnodes > MAX_NUMNODES){
printk(KERN_WARNING
"Calgary: MAX_NUMNODES too low! Defined as %d, "
"but system has %d nodes.\n",
- MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ MAX_NUMNODES, numnodes);
return -ENODEV;
}
}
ptr = ((unsigned long)rio_table_hdr) + 3;
- for (i = 0; i < rio_table_hdr->num_scal_dev;
- i++, ptr += scal_detail_size)
+ for (i = 0; i < numnodes; i++, ptr += scal_detail_size)
scal_devs[i] = (struct scal_detail *)ptr;
for (i = 0; i < rio_table_hdr->num_rio_dev;
early_cpu_init();
early_ioremap_init();
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
-
ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
screen_info = boot_params.screen_info;
edid_info = boot_params.edid_info;
parse_early_param();
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+ /*
+ * Must be before kernel pagetables are setup
+ * or fixmap area is touched.
+ */
+ vmi_init();
+#endif
+
/* after early param, so could get panic from serial */
reserve_early_setup_data();
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
+
+ if (is_uv_system())
+ uv_system_init();
out:
preempt_enable();
}
#include <asm/genapic.h>
#include <asm/idle.h>
#include <asm/tsc.h>
+#include <asm/irq_vectors.h>
#include <mach_apic.h>
uv_init_blade(blade, node, cur_cpu);
cur_cpu += uv_blade_nr_possible_cpus(blade);
}
- set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+ alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
uv_enable_timeouts();
return 0;
__raw_spin_unlock(&sync_lock);
}
}
- if (!(now-start)) {
- printk("Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
+ WARN(!(now-start),
+ "Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
now-start, end-start);
- WARN_ON(1);
- }
}
/*
#include <linux/list.h>
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <linux/version.h>
#include <linux/leds.h>
#include <asm/gpio.h>
static unsigned long __meminitdata table_end;
static unsigned long __meminitdata table_top;
-static __meminit void *alloc_low_page(unsigned long *phys)
+static __ref void *alloc_low_page(unsigned long *phys)
{
unsigned long pfn = table_end++;
void *adr;
return adr;
}
-static __meminit void unmap_low_page(void *adr)
+static __ref void unmap_low_page(void *adr)
{
if (after_bootmem)
return;
}
if (pmd_val(*pmd)) {
- if (!pmd_large(*pmd))
+ if (!pmd_large(*pmd)) {
+ spin_lock(&init_mm.page_table_lock);
last_map_addr = phys_pte_update(pmd, address,
- end);
+ end);
+ spin_unlock(&init_mm.page_table_lock);
+ }
/* Count entries we're using from level2_ident_pgt */
if (start == 0)
pages++;
if (page_size_mask & (1<<PG_LEVEL_2M)) {
pages++;
+ spin_lock(&init_mm.page_table_lock);
set_pte((pte_t *)pmd,
pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+ spin_unlock(&init_mm.page_table_lock);
last_map_addr = (address & PMD_MASK) + PMD_SIZE;
continue;
}
last_map_addr = phys_pte_init(pte, address, end);
unmap_low_page(pte);
+ spin_lock(&init_mm.page_table_lock);
pmd_populate_kernel(&init_mm, pmd, __va(pte_phys));
+ spin_unlock(&init_mm.page_table_lock);
}
update_page_count(PG_LEVEL_2M, pages);
return last_map_addr;
pmd_t *pmd = pmd_offset(pud, 0);
unsigned long last_map_addr;
- spin_lock(&init_mm.page_table_lock);
last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
- spin_unlock(&init_mm.page_table_lock);
__flush_tlb_all();
return last_map_addr;
}
if (page_size_mask & (1<<PG_LEVEL_1G)) {
pages++;
+ spin_lock(&init_mm.page_table_lock);
set_pte((pte_t *)pud,
pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+ spin_unlock(&init_mm.page_table_lock);
last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
continue;
}
pmd = alloc_low_page(&pmd_phys);
-
- spin_lock(&init_mm.page_table_lock);
last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
unmap_low_page(pmd);
+
+ spin_lock(&init_mm.page_table_lock);
pud_populate(&init_mm, pud, __va(pmd_phys));
spin_unlock(&init_mm.page_table_lock);
-
}
__flush_tlb_all();
update_page_count(PG_LEVEL_1G, pages);
continue;
}
- if (after_bootmem)
- pud = pud_offset(pgd, start & PGDIR_MASK);
- else
- pud = alloc_low_page(&pud_phys);
-
+ pud = alloc_low_page(&pud_phys);
last_map_addr = phys_pud_init(pud, __pa(start), __pa(next),
page_size_mask);
unmap_low_page(pud);
- pgd_populate(&init_mm, pgd_offset_k(start),
- __va(pud_phys));
+
+ spin_lock(&init_mm.page_table_lock);
+ pgd_populate(&init_mm, pgd, __va(pud_phys));
+ spin_unlock(&init_mm.page_table_lock);
}
return last_map_addr;
{
if (!early_ioremap_nested)
return 0;
-
- printk(KERN_WARNING
+ WARN(1, KERN_WARNING
"Debug warning: early ioremap leak of %d areas detected.\n",
- early_ioremap_nested);
+ early_ioremap_nested);
printk(KERN_WARNING
- "please boot with early_ioremap_debug and report the dmesg.\n");
- WARN_ON(1);
+ "please boot with early_ioremap_debug and report the dmesg.\n");
return 1;
}
"may miss events.\n");
}
-static void leave_uniprocessor(void)
+/* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
+ but this whole function is ifdefed CONFIG_HOTPLUG_CPU */
+static void __ref leave_uniprocessor(void)
{
int cpu;
int err;
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
- if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+ if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
_PAGE_CACHE_UC_MINUS, NULL))
return -EINVAL;
if (!pat_enabled)
return set_memory_uc(addr, numpages);
- if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+ if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
_PAGE_CACHE_WC, NULL))
return -EINVAL;
int set_memory_wb(unsigned long addr, int numpages)
{
- free_memtype(addr, addr + numpages * PAGE_SIZE);
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
return _set_memory_wb(addr, numpages);
}
return -EBUSY;
}
+static struct memtype *cached_entry;
+static u64 cached_start;
+
/*
* req_type typically has one of the:
* - _PAGE_CACHE_WB
spin_lock(&memtype_lock);
+ if (cached_entry && start >= cached_start)
+ entry = cached_entry;
+ else
+ entry = list_entry(&memtype_list, struct memtype, nd);
+
/* Search for existing mapping that overlaps the current range */
where = NULL;
- list_for_each_entry(entry, &memtype_list, nd) {
+ list_for_each_entry_continue(entry, &memtype_list, nd) {
if (end <= entry->start) {
where = entry->nd.prev;
+ cached_entry = list_entry(where, struct memtype, nd);
break;
} else if (start <= entry->start) { /* end > entry->start */
err = chk_conflict(new, entry, new_type);
dprintk("Overlap at 0x%Lx-0x%Lx\n",
entry->start, entry->end);
where = entry->nd.prev;
+ cached_entry = list_entry(where,
+ struct memtype, nd);
}
break;
} else if (start < entry->end) { /* start > entry->start */
if (!err) {
dprintk("Overlap at 0x%Lx-0x%Lx\n",
entry->start, entry->end);
- where = &entry->nd;
+ cached_entry = list_entry(entry->nd.prev,
+ struct memtype, nd);
+
+ /*
+ * Move to right position in the linked
+ * list to add this new entry
+ */
+ list_for_each_entry_continue(entry,
+ &memtype_list, nd) {
+ if (start <= entry->start) {
+ where = entry->nd.prev;
+ break;
+ }
+ }
}
break;
}
return err;
}
+ cached_start = start;
+
if (where)
list_add(&new->nd, where);
else
spin_lock(&memtype_lock);
list_for_each_entry(entry, &memtype_list, nd) {
if (entry->start == start && entry->end == end) {
+ if (cached_entry == entry || cached_start == start)
+ cached_entry = NULL;
+
list_del(&entry->nd);
kfree(entry);
err = 0;
}
-/*
- * /dev/mem mmap interface. The memtype used for mapping varies:
- * - Use UC for mappings with O_SYNC flag
- * - Without O_SYNC flag, if there is any conflict in reserve_memtype,
- * inherit the memtype from existing mapping.
- * - Else use UC_MINUS memtype (for backward compatibility with existing
- * X drivers.
- */
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
unsigned long size, pgprot_t *vma_prot)
{
u64 offset = ((u64) pfn) << PAGE_SHIFT;
- unsigned long flags = _PAGE_CACHE_UC_MINUS;
+ unsigned long flags = -1;
int retval;
if (!range_is_allowed(pfn, size))
return 0;
if (file->f_flags & O_SYNC) {
- flags = _PAGE_CACHE_UC;
+ flags = _PAGE_CACHE_UC_MINUS;
}
#ifdef CONFIG_X86_32
#endif
/*
- * With O_SYNC, we can only take UC mapping. Fail if we cannot.
+ * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
+ *
* Without O_SYNC, we want to get
* - WB for WB-able memory and no other conflicting mappings
* - UC_MINUS for non-WB-able memory with no other conflicting mappings
* - Inherit from confliting mappings otherwise
*/
- if (flags != _PAGE_CACHE_UC_MINUS) {
+ if (flags != -1) {
retval = reserve_memtype(offset, offset + size, flags, NULL);
} else {
retval = reserve_memtype(offset, offset + size, -1, &flags);
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/kdebug.h>
+#include <linux/cpu.h>
#include <asm/nmi.h>
#include <asm/msr.h>
#include <asm/apic.h>
static int nmi_start(void);
static void nmi_stop(void);
+static void nmi_cpu_start(void *dummy);
+static void nmi_cpu_stop(void *dummy);
/* 0 == registered but off, 1 == registered and on */
static int nmi_enabled = 0;
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+ void *data)
+{
+ int cpu = (unsigned long)data;
+ switch (action) {
+ case CPU_DOWN_FAILED:
+ case CPU_ONLINE:
+ smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+ break;
+ case CPU_DOWN_PREPARE:
+ smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+ .notifier_call = oprofile_cpu_notifier
+};
+#endif
+
#ifdef CONFIG_PM
static int nmi_suspend(struct sys_device *dev, pm_message_t state)
{
+ /* Only one CPU left, just stop that one */
if (nmi_enabled == 1)
- nmi_stop();
+ nmi_cpu_stop(NULL);
return 0;
}
static int nmi_resume(struct sys_device *dev)
{
if (nmi_enabled == 1)
- nmi_start();
+ nmi_cpu_start(NULL);
return 0;
}
}
init_sysfs();
+#ifdef CONFIG_SMP
+ register_cpu_notifier(&oprofile_cpu_nb);
+#endif
using_nmi = 1;
ops->create_files = nmi_create_files;
ops->setup = nmi_setup;
void op_nmi_exit(void)
{
- if (using_nmi)
+ if (using_nmi) {
exit_sysfs();
+#ifdef CONFIG_SMP
+ unregister_cpu_notifier(&oprofile_cpu_nb);
+#endif
+ }
}
/* iterator */
static int find_start(struct device *dev, void *data)
{
- loff_t k = *(loff_t *)data;
+ loff_t *k = data;
if (dev->type != &disk_type)
return 0;
- if (!k--)
+ if (!*k)
return 1;
+ (*k)--;
return 0;
}
static void *part_start(struct seq_file *part, loff_t *pos)
{
struct device *dev;
- loff_t n = *pos;
+ loff_t k = *pos;
- if (!n)
+ if (!k)
seq_puts(part, "major minor #blocks name\n\n");
mutex_lock(&block_class_lock);
- dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
- if (dev)
+ dev = class_find_device(&block_class, NULL, &k, find_start);
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
struct device *dev;
++*pos;
dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
- if (dev)
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
static void *diskstats_start(struct seq_file *part, loff_t *pos)
{
struct device *dev;
+ loff_t k = *pos;
mutex_lock(&block_class_lock);
- dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
- if (dev)
+ dev = class_find_device(&block_class, NULL, &k, find_start);
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
++*pos;
dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
- if (dev)
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
mutex_lock(&block_class_lock);
find.name = name;
find.part = part;
- dev = class_find_device(&block_class, NULL, (void *)&find, match_id);
- if (dev)
+ dev = class_find_device(&block_class, NULL, &find, match_id);
+ if (dev) {
+ put_device(dev);
devt = MKDEV(MAJOR(dev->devt),
MINOR(dev->devt) + part);
+ }
mutex_unlock(&block_class_lock);
return devt;
static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
int err)
{
+ struct aead_request *areq = req->data;
+
if (!err) {
- struct aead_request *areq = req->data;
struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct ablkcipher_request *abreq = aead_request_ctx(areq);
err = crypto_authenc_genicv(areq, iv, 0);
}
- aead_request_complete(req->data, err);
+ aead_request_complete(areq, err);
}
static int crypto_authenc_encrypt(struct aead_request *req)
static void crypto_authenc_givencrypt_done(struct crypto_async_request *req,
int err)
{
+ struct aead_request *areq = req->data;
+
if (!err) {
- struct aead_request *areq = req->data;
struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
err = crypto_authenc_genicv(areq, greq->giv, 0);
}
- aead_request_complete(req->data, err);
+ aead_request_complete(areq, err);
}
static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
{ } /* terminate list */
};
unsigned long xfer_mask;
unsigned int horkage_on;
unsigned int horkage_off;
+ unsigned int lflags;
};
struct ata_force_ent {
}
/**
- * ata_force_spd_limit - force SATA spd limit according to libata.force
+ * ata_force_link_limits - force link limits according to libata.force
* @link: ATA link of interest
*
- * Force SATA spd limit according to libata.force and whine about
- * it. When only the port part is specified (e.g. 1:), the limit
- * applies to all links connected to both the host link and all
- * fan-out ports connected via PMP. If the device part is
- * specified as 0 (e.g. 1.00:), it specifies the first fan-out
- * link not the host link. Device number 15 always points to the
- * host link whether PMP is attached or not.
+ * Force link flags and SATA spd limit according to libata.force
+ * and whine about it. When only the port part is specified
+ * (e.g. 1:), the limit applies to all links connected to both
+ * the host link and all fan-out ports connected via PMP. If the
+ * device part is specified as 0 (e.g. 1.00:), it specifies the
+ * first fan-out link not the host link. Device number 15 always
+ * points to the host link whether PMP is attached or not.
*
* LOCKING:
* EH context.
*/
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
{
+ bool did_spd = false;
int linkno, i;
if (ata_is_host_link(link))
if (fe->device != -1 && fe->device != linkno)
continue;
- if (!fe->param.spd_limit)
- continue;
+ /* only honor the first spd limit */
+ if (!did_spd && fe->param.spd_limit) {
+ link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: PHY spd limit set to %s\n",
+ fe->param.name);
+ did_spd = true;
+ }
- link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
- ata_link_printk(link, KERN_NOTICE,
- "FORCE: PHY spd limit set to %s\n", fe->param.name);
- return;
+ /* let lflags stack */
+ if (fe->param.lflags) {
+ link->flags |= fe->param.lflags;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: link flag 0x%x forced -> 0x%x\n",
+ fe->param.lflags, link->flags);
+ }
}
}
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
found = 1;
- if (dev->dma_mode != 0xff)
+ if (ata_dma_enabled(dev))
used_dma = 1;
}
if (!found)
/* step 3: set host DMA timings */
ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+ if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
continue;
dev->xfer_mode = dev->dma_mode;
*/
int sata_link_init_spd(struct ata_link *link)
{
- u32 scontrol;
u8 spd;
int rc;
- rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
if (rc)
return rc;
- spd = (scontrol >> 4) & 0xf;
+ spd = (link->saved_scontrol >> 4) & 0xf;
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
- ata_force_spd_limit(link);
+ ata_force_link_limits(link);
link->sata_spd_limit = link->hw_sata_spd_limit;
ata_port_wait_eh(ap);
/* EH is now guaranteed to see UNLOADING - EH context belongs
- * to us. Disable all existing devices.
+ * to us. Restore SControl and disable all existing devices.
*/
- ata_port_for_each_link(link, ap) {
+ __ata_port_for_each_link(link, ap) {
+ sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
ata_link_for_each_dev(dev, link)
ata_dev_disable(dev);
}
{ "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
+ { "nohrst", .lflags = ATA_LFLAG_NO_HRST },
+ { "nosrst", .lflags = ATA_LFLAG_NO_SRST },
+ { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
}
if (ehc->i.serror)
- ata_port_printk(ap, KERN_ERR,
+ ata_link_printk(link, KERN_ERR,
"SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
}
static int ata_eh_followup_srst_needed(struct ata_link *link,
- int rc, int classify,
- const unsigned int *classes)
+ int rc, const unsigned int *classes)
{
if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
return 0;
- if (rc == -EAGAIN) {
- if (classify)
- return 1;
- rc = 0;
- }
- if (rc != 0)
- return 0;
+ if (rc == -EAGAIN)
+ return 1;
if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
return 1;
return 0;
*/
while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
max_tries++;
+ if (link->flags & ATA_LFLAG_NO_HRST)
+ hardreset = NULL;
+ if (link->flags & ATA_LFLAG_NO_SRST)
+ softreset = NULL;
now = jiffies;
deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
ehc->i.action &= ~ATA_EH_RESET;
if (hardreset) {
reset = hardreset;
- ehc->i.action = ATA_EH_HARDRESET;
+ ehc->i.action |= ATA_EH_HARDRESET;
} else if (softreset) {
reset = softreset;
- ehc->i.action = ATA_EH_SOFTRESET;
+ ehc->i.action |= ATA_EH_SOFTRESET;
}
if (prereset) {
ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
rc = ata_do_reset(link, reset, classes, deadline);
+ if (rc && rc != -EAGAIN)
+ goto fail;
if (reset == hardreset &&
- ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+ ata_eh_followup_srst_needed(link, rc, classes)) {
/* okay, let's do follow-up softreset */
reset = softreset;
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
rc = ata_do_reset(link, reset, classes, deadline);
}
-
- /* -EAGAIN can happen if we skipped followup SRST */
- if (rc && rc != -EAGAIN)
- goto fail;
} else {
if (verbose)
ata_link_printk(link, KERN_INFO, "no reset method "
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
- if (adev->dma_mode)
+ if (ata_dma_enabled(adev))
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
u16 tmp16;
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
- if (adev->dma_mode >= XFER_UDMA_0)
+ if (ata_using_udma(adev))
tmp16 |= (1 << dn);
else
tmp16 &= ~(1 << dn);
struct ata_device *prev = ap->private_data;
/* See if the DMA settings could be wrong */
- if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+ if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
/* Maybe, but do the channels match MWDMA/UDMA ? */
- if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
- (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+ if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+ (ata_using_udma(prev) && !ata_using_udma(adev)))
/* Switch the mode bits */
cs5530_set_dmamode(ap, adev);
}
{
unsigned char id[41];
int mode = 0;
- char *mtype;
+ char *mtype = "";
char mbuf[8];
char *cbl = "(40 wire cable)";
if (adev != ap->private_data) {
oldpiix_set_piomode(ap, adev);
- if (adev->dma_mode)
+ if (ata_dma_enabled(adev))
oldpiix_set_dmamode(ap, adev);
}
return ata_sff_qc_issue(qc);
struct ata_device *prev = ap->private_data;
/* See if the DMA settings could be wrong */
- if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+ if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
/* Maybe, but do the channels match MWDMA/UDMA ? */
- if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
- (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+ if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+ (ata_using_udma(prev) && !ata_using_udma(adev)))
/* Switch the mode bits */
sc1200_set_dmamode(ap, adev);
}
}
/**
- * via_ata_sff_tf_load - send taskfile registers to host controller
+ * via_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
* Outputs ATA taskfile to standard ATA host controller.
*
* Note: This is to fix the internal bug of via chipsets, which
- * will reset the device register after changing the IEN bit on
- * ctl register
+ * will reset the device register after changing the IEN bit on
+ * ctl register
*/
-static void via_ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
- if (tf->ctl != ap->last_ctl) {
- iowrite8(tf->ctl, ioaddr->ctl_addr);
- iowrite8(tf->device, ioaddr->device_addr);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
- if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- iowrite8(tf->hob_feature, ioaddr->feature_addr);
- iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
- iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
- iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
- iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
- VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
- tf->hob_feature,
- tf->hob_nsect,
- tf->hob_lbal,
- tf->hob_lbam,
- tf->hob_lbah);
- }
+ struct ata_taskfile tmp_tf;
- if (is_addr) {
- iowrite8(tf->feature, ioaddr->feature_addr);
- iowrite8(tf->nsect, ioaddr->nsect_addr);
- iowrite8(tf->lbal, ioaddr->lbal_addr);
- iowrite8(tf->lbam, ioaddr->lbam_addr);
- iowrite8(tf->lbah, ioaddr->lbah_addr);
- VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
- tf->feature,
- tf->nsect,
- tf->lbal,
- tf->lbam,
- tf->lbah);
+ if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
+ tmp_tf = *tf;
+ tmp_tf.flags |= ATA_TFLAG_DEVICE;
+ tf = &tmp_tf;
}
-
- if (tf->flags & ATA_TFLAG_DEVICE) {
- iowrite8(tf->device, ioaddr->device_addr);
- VPRINTK("device 0x%X\n", tf->device);
- }
-
- ata_wait_idle(ap);
+ ata_sff_tf_load(ap, tf);
}
static struct scsi_host_template via_sht = {
.set_piomode = via_set_piomode,
.set_dmamode = via_set_dmamode,
.prereset = via_pre_reset,
- .sff_tf_load = via_ata_tf_load,
+ .sff_tf_load = via_tf_load,
};
static struct ata_port_operations via_port_ops_noirq = {
.inherits = &via_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
- .sff_tf_load = via_ata_tf_load,
};
/**
if (ap->nr_active_links == 0)
return 0;
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- /*
- * The port is operating in host queuing mode (EDMA).
- * It can accomodate a new qc if the qc protocol
- * is compatible with the current host queue mode.
- */
- if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
- /*
- * The host queue (EDMA) is in NCQ mode.
- * If the new qc is also an NCQ command,
- * then allow the new qc.
- */
- if (qc->tf.protocol == ATA_PROT_NCQ)
- return 0;
- } else {
- /*
- * The host queue (EDMA) is in non-NCQ, DMA mode.
- * If the new qc is also a non-NCQ, DMA command,
- * then allow the new qc.
- */
- if (qc->tf.protocol == ATA_PROT_DMA)
- return 0;
- }
- }
+ /*
+ * The port is operating in host queuing mode (EDMA) with NCQ
+ * enabled, allow multiple NCQ commands. EDMA also allows
+ * queueing multiple DMA commands but libata core currently
+ * doesn't allow it.
+ */
+ if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+ (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
+ return 0;
+
return ATA_DEFER_PORT;
}
break;
case chip_soc:
hpriv->ops = &mv_soc_ops;
- hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+ MV_HP_ERRATA_60X1C0;
break;
default:
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/errno.h>
if (!class)
return -EINVAL;
+ if (!class->p) {
+ WARN(1, "%s called for class '%s' before it was initialized",
+ __func__, class->name);
+ return -EINVAL;
+ }
+
mutex_lock(&class->p->class_mutex);
list_for_each_entry(dev, &class->p->class_devices, node) {
if (start) {
if (!class)
return NULL;
+ if (!class->p) {
+ WARN(1, "%s called for class '%s' before it was initialized",
+ __func__, class->name);
+ return NULL;
+ }
mutex_lock(&class->p->class_mutex);
list_for_each_entry(dev, &class->p->class_devices, node) {
* it is attached to. If it is not attached to a bus either, an empty
* string will be returned.
*/
-const char *dev_driver_string(struct device *dev)
+const char *dev_driver_string(const struct device *dev)
{
return dev->driver ? dev->driver->name :
(dev->bus ? dev->bus->name :
spin_lock_init(&dev->devres_lock);
INIT_LIST_HEAD(&dev->devres_head);
device_init_wakeup(dev, 0);
+ device_pm_init(dev);
set_dev_node(dev, -1);
}
{
struct device *parent = NULL;
struct class_interface *class_intf;
- int error;
+ int error = -EINVAL;
dev = get_device(dev);
- if (!dev || !strlen(dev->bus_id)) {
- error = -EINVAL;
- goto Done;
- }
+ if (!dev)
+ goto done;
+
+ /* Temporarily support init_name if it is set.
+ * It will override bus_id for now */
+ if (dev->init_name)
+ dev_set_name(dev, "%s", dev->init_name);
+
+ if (!strlen(dev->bus_id))
+ goto done;
pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
error = bus_add_device(dev);
if (error)
goto BusError;
- error = device_pm_add(dev);
+ error = dpm_sysfs_add(dev);
if (error)
- goto PMError;
+ goto DPMError;
+ device_pm_add(dev);
kobject_uevent(&dev->kobj, KOBJ_ADD);
bus_attach_device(dev);
if (parent)
class_intf->add_dev(dev, class_intf);
mutex_unlock(&dev->class->p->class_mutex);
}
- Done:
+done:
put_device(dev);
return error;
- PMError:
+ DPMError:
bus_remove_device(dev);
BusError:
if (dev->bus)
cleanup_device_parent(dev);
if (parent)
put_device(parent);
- goto Done;
+ goto done;
}
/**
struct class_interface *class_intf;
device_pm_remove(dev);
+ dpm_sysfs_remove(dev);
if (parent)
klist_del(&dev->knode_parent);
if (MAJOR(dev->devt)) {
#include <linux/string.h>
#include "base.h"
-#define to_dev(node) container_of(node, struct device, driver_list)
-
-
static struct device *next_device(struct klist_iter *i)
{
struct klist_node *n = klist_next(i);
* device_pm_add - add a device to the list of active devices
* @dev: Device to be added to the list
*/
-int device_pm_add(struct device *dev)
+void device_pm_add(struct device *dev)
{
- int error;
-
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
if (dev->parent) {
- if (dev->parent->power.status >= DPM_SUSPENDING) {
- dev_warn(dev, "parent %s is sleeping, will not add\n",
+ if (dev->parent->power.status >= DPM_SUSPENDING)
+ dev_warn(dev, "parent %s should not be sleeping\n",
dev->parent->bus_id);
- WARN_ON(true);
- }
} else if (transition_started) {
/*
* We refuse to register parentless devices while a PM
*/
WARN_ON(true);
}
- error = dpm_sysfs_add(dev);
- if (!error) {
- dev->power.status = DPM_ON;
- list_add_tail(&dev->power.entry, &dpm_list);
- }
+
+ list_add_tail(&dev->power.entry, &dpm_list);
mutex_unlock(&dpm_list_mtx);
- return error;
}
/**
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
- dpm_sysfs_remove(dev);
list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
}
+static inline void device_pm_init(struct device *dev)
+{
+ dev->power.status = DPM_ON;
+}
+
#ifdef CONFIG_PM_SLEEP
/*
return container_of(entry, struct device, power.entry);
}
-extern int device_pm_add(struct device *);
+extern void device_pm_add(struct device *);
extern void device_pm_remove(struct device *);
#else /* CONFIG_PM_SLEEP */
-static inline int device_pm_add(struct device *dev) { return 0; }
+static inline void device_pm_add(struct device *dev) {}
static inline void device_pm_remove(struct device *dev) {}
#endif
#include <linux/types.h>
#include <linux/cdev.h>
-#include <linux/version.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <linux/types.h>
#include <linux/cdev.h>
-#include <linux/version.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <linux/types.h>
#include <linux/cdev.h>
-#include <linux/version.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/workqueue.h>
-#include <linux/version.h>
#define EDAC_MC_LABEL_LEN 31
#define EDAC_DEVICE_NAME_LEN 31
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <linux/version.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/device.h>
* SOFTWARE.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/mount.h>
"not 2KB aligned!\n", pa);
return;
}
- if (pa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
+ if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
ipath_dev_err(dd,
"BUG: Physical page address 0x%lx "
"larger than supported\n", pa);
u16 lrh0;
u16 lid;
int ret = 0;
+ int next_cur;
spin_lock_irqsave(&qp->s_lock, flags);
goto bail;
wqe = get_swqe_ptr(qp, qp->s_cur);
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
+ next_cur = qp->s_cur + 1;
+ if (next_cur >= qp->s_size)
+ next_cur = 0;
/* Construct the header. */
ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
qp->s_flags |= IPATH_S_WAIT_DMA;
goto bail;
}
+ qp->s_cur = next_cur;
spin_unlock_irqrestore(&qp->s_lock, flags);
ipath_ud_loopback(qp, wqe);
spin_lock_irqsave(&qp->s_lock, flags);
}
}
+ qp->s_cur = next_cur;
extra_bytes = -wqe->length & 3;
nwords = (wqe->length + extra_bytes) >> 2;
#include <linux/dma-mapping.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <asm/io.h>
#include <linux/crc32c.h>
netif_stop_queue(dev);
- /*
- * Now flush workqueue to make sure a scheduled task doesn't
- * bring our internal state back up.
- */
- flush_workqueue(ipoib_workqueue);
-
- ipoib_ib_dev_down(dev, 1);
- ipoib_ib_dev_stop(dev, 1);
+ ipoib_ib_dev_down(dev, 0);
+ ipoib_ib_dev_stop(dev, 0);
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
struct ipoib_dev_priv *cpriv;
register_failed:
ib_unregister_event_handler(&priv->event_handler);
- flush_scheduled_work();
+ flush_workqueue(ipoib_workqueue);
event_failed:
ipoib_dev_cleanup(priv->dev);
list_for_each_entry_safe(priv, tmp, dev_list, list) {
ib_unregister_event_handler(&priv->event_handler);
- flush_scheduled_work();
+
+ rtnl_lock();
+ dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP);
+ rtnl_unlock();
+
+ flush_workqueue(ipoib_workqueue);
unregister_netdev(priv->dev);
ipoib_dev_cleanup(priv->dev);
&priv->mcast_task, 0);
mutex_unlock(&mcast_mutex);
- if (mcast == priv->broadcast)
+ if (mcast == priv->broadcast) {
+ /*
+ * Take RTNL lock here to avoid racing with
+ * ipoib_stop() and turning the carrier back
+ * on while a device is being removed.
+ */
+ rtnl_lock();
netif_carrier_on(dev);
+ rtnl_unlock();
+ }
return 0;
}
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include "iscsi_iser.h"
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
*
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/delay.h>
#include <linux/eeprom_93cx6.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/version.h>
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <linux/ethtool.h>
#include <linux/firmware.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/timer.h>
#include <linux/vmalloc.h>
#include <linux/crc32.h>
#include <linux/in.h>
#include <linux/tcp.h>
#include <linux/skbuff.h>
-#include <linux/version.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <asm/io.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
-#include <linux/version.h>
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/version.h>
-
#include <linux/spinlock.h>
#include <asm/irq.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
-#include <linux/version.h>
#include <linux/bitops.h>
#include <linux/jiffies.h>
*
*/
-#include <linux/version.h>
-
/* MAX_INTR - the maximum number of times we can loop
* inside the interrupt function before returning
* control to the OS (maximum value is 256)
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
-#include <linux/version.h>
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <net/mac80211.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
-
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/device.h>
{
struct dasd_device *device;
struct dasd_ccw_req *cqr;
- unsigned long flags;
int ret;
- device = dasd_device_from_cdev(cdev);
+ device = dasd_device_from_cdev_locked(cdev);
if (IS_ERR(device))
return 0;
- spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
ret = 0;
switch (event) {
case CIO_GONE:
ret = 1;
break;
}
- spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
dasd_put_device(device);
return ret;
}
unsigned char flags;
unsigned char reserved[4];
unsigned char suborder;
- unsigned char varies[9];
+ unsigned char varies[5];
} __attribute__ ((packed));
/*
#include <linux/poll.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
+#include <linux/err.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
SNSS_DATA_SIZE, device);
- if (!cqr)
+ if (IS_ERR(cqr))
return -ENOMEM;
cqr->startdev = device;
* get minor, add to list
*/
down_write(&dcssblk_devices_sem);
+ if (dcssblk_get_segment_by_name(local_buf)) {
+ rc = -EEXIST;
+ goto release_gd;
+ }
rc = dcssblk_assign_free_minor(dev_info);
if (rc) {
up_write(&dcssblk_devices_sem);
/* The current idal buffer is not correct. Allocate a new one. */
new = idal_buffer_alloc(block_size, 0);
- if (new == NULL)
+ if (IS_ERR(new))
return -ENOMEM;
if (device->char_data.idal_buf != NULL)
/* Allocate a new idal buffer. */
new = idal_buffer_alloc(count, 0);
- if (new == NULL)
+ if (IS_ERR(new))
return -ENOMEM;
if (device->char_data.idal_buf != NULL)
idal_buffer_free(device->char_data.idal_buf);
gdev = to_ccwgroupdev(dev);
for (i = 0; i < gdev->count; i++) {
- dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
- put_device(&gdev->cdev[i]->dev);
+ if (gdev->cdev[i]) {
+ dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+ put_device(&gdev->cdev[i]->dev);
+ }
}
kfree(gdev);
}
atomic_set(&gdev->onoff, 0);
mutex_init(&gdev->reg_mutex);
mutex_lock(&gdev->reg_mutex);
+ gdev->creator_id = creator_id;
+ gdev->count = num_devices;
+ gdev->dev.bus = &ccwgroup_bus_type;
+ gdev->dev.parent = root;
+ gdev->dev.release = ccwgroup_release;
+ device_initialize(&gdev->dev);
+
curr_buf = buf;
for (i = 0; i < num_devices && curr_buf; i++) {
rc = __get_next_bus_id(&curr_buf, tmp_bus_id);
rc = -EINVAL;
goto error;
}
- gdev->creator_id = creator_id;
- gdev->count = num_devices;
- gdev->dev.bus = &ccwgroup_bus_type;
- gdev->dev.parent = root;
- gdev->dev.release = ccwgroup_release;
snprintf (gdev->dev.bus_id, BUS_ID_SIZE, "%s",
gdev->cdev[0]->dev.bus_id);
- rc = device_register(&gdev->dev);
+ rc = device_add(&gdev->dev);
if (rc)
goto error;
get_device(&gdev->dev);
void css_wait_for_slow_path(void)
{
- flush_workqueue(ccw_device_notify_work);
flush_workqueue(slow_path_wq);
}
};
struct workqueue_struct *ccw_device_work;
-struct workqueue_struct *ccw_device_notify_work;
wait_queue_head_t ccw_device_init_wq;
atomic_t ccw_device_init_count;
ccw_device_work = create_singlethread_workqueue("cio");
if (!ccw_device_work)
return -ENOMEM; /* FIXME: better errno ? */
- ccw_device_notify_work = create_singlethread_workqueue("cio_notify");
- if (!ccw_device_notify_work) {
- ret = -ENOMEM; /* FIXME: better errno ? */
- goto out_err;
- }
slow_path_wq = create_singlethread_workqueue("kslowcrw");
if (!slow_path_wq) {
ret = -ENOMEM; /* FIXME: better errno ? */
out_err:
if (ccw_device_work)
destroy_workqueue(ccw_device_work);
- if (ccw_device_notify_work)
- destroy_workqueue(ccw_device_notify_work);
if (slow_path_wq)
destroy_workqueue(slow_path_wq);
return ret;
{
css_driver_unregister(&io_subchannel_driver);
bus_unregister(&ccw_bus_type);
- destroy_workqueue(ccw_device_notify_work);
destroy_workqueue(ccw_device_work);
}
ccw_device_schedule_recovery();
}
+void ccw_device_set_notoper(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+ CIO_TRACE_EVENT(2, "notoper");
+ CIO_TRACE_EVENT(2, sch->dev.bus_id);
+ ccw_device_set_timeout(cdev, 0);
+ cio_disable_subchannel(sch);
+ cdev->private->state = DEV_STATE_NOT_OPER;
+}
+
static int io_subchannel_sch_event(struct subchannel *sch, int slow)
{
int event, ret, disc;
unsigned long flags;
- enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE } action;
+ enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE, DISC } action;
struct ccw_device *cdev;
spin_lock_irqsave(sch->lock, flags);
}
/* fall through */
case CIO_GONE:
- /* Prevent unwanted effects when opening lock. */
- cio_disable_subchannel(sch);
- device_set_disconnected(cdev);
/* Ask driver what to do with device. */
- action = UNREGISTER;
- spin_unlock_irqrestore(sch->lock, flags);
- ret = io_subchannel_notify(sch, event);
- spin_lock_irqsave(sch->lock, flags);
- if (ret)
- action = NONE;
+ if (io_subchannel_notify(sch, event))
+ action = DISC;
+ else
+ action = UNREGISTER;
break;
case CIO_REVALIDATE:
/* Device will be removed, so no notify necessary. */
switch (action) {
case UNREGISTER:
case UNREGISTER_PROBE:
+ ccw_device_set_notoper(cdev);
/* Unregister device (will use subchannel lock). */
spin_unlock_irqrestore(sch->lock, flags);
css_sch_device_unregister(sch);
case REPROBE:
ccw_device_trigger_reprobe(cdev);
break;
+ case DISC:
+ device_set_disconnected(cdev);
+ break;
default:
break;
}
EXPORT_SYMBOL(get_ccwdev_by_busid);
EXPORT_SYMBOL(ccw_bus_type);
EXPORT_SYMBOL(ccw_device_work);
-EXPORT_SYMBOL(ccw_device_notify_work);
EXPORT_SYMBOL_GPL(ccw_device_get_subchannel_id);
}
extern struct workqueue_struct *ccw_device_work;
-extern struct workqueue_struct *ccw_device_notify_work;
extern wait_queue_head_t ccw_device_init_wq;
extern atomic_t ccw_device_init_count;
void ccw_device_trigger_reprobe(struct ccw_device *);
void ccw_device_kill_io(struct ccw_device *);
int ccw_device_notify(struct ccw_device *, int);
+void ccw_device_set_notoper(struct ccw_device *cdev);
/* qdio needs this. */
void ccw_device_set_timeout(struct ccw_device *, int);
return 0;
if (!cdev->online)
return 0;
+ CIO_MSG_EVENT(2, "notify called for 0.%x.%04x, event=%d\n",
+ cdev->private->dev_id.ssid, cdev->private->dev_id.devno,
+ event);
return cdev->drv->notify ? cdev->drv->notify(cdev, event) : 0;
}
-static void
-ccw_device_oper_notify(struct work_struct *work)
+static void cmf_reenable_delayed(struct work_struct *work)
{
struct ccw_device_private *priv;
struct ccw_device *cdev;
- int ret;
priv = container_of(work, struct ccw_device_private, kick_work);
cdev = priv->cdev;
- ret = ccw_device_notify(cdev, CIO_OPER);
- if (ret) {
+ cmf_reenable(cdev);
+}
+
+static void ccw_device_oper_notify(struct ccw_device *cdev)
+{
+ if (ccw_device_notify(cdev, CIO_OPER)) {
/* Reenable channel measurements, if needed. */
- cmf_reenable(cdev);
- wake_up(&cdev->private->wait_q);
- } else
- /* Driver doesn't want device back. */
- ccw_device_do_unreg_rereg(work);
+ PREPARE_WORK(&cdev->private->kick_work, cmf_reenable_delayed);
+ queue_work(ccw_device_work, &cdev->private->kick_work);
+ return;
+ }
+ /* Driver doesn't want device back. */
+ ccw_device_set_notoper(cdev);
+ PREPARE_WORK(&cdev->private->kick_work, ccw_device_do_unreg_rereg);
+ queue_work(ccw_device_work, &cdev->private->kick_work);
}
/*
if (cdev->private->flags.donotify) {
cdev->private->flags.donotify = 0;
- PREPARE_WORK(&cdev->private->kick_work, ccw_device_oper_notify);
- queue_work(ccw_device_notify_work, &cdev->private->kick_work);
+ ccw_device_oper_notify(cdev);
}
wake_up(&cdev->private->wait_q);
/* s390dbf views */
#define QDIO_DBF_SETUP_LEN 8
-#define QDIO_DBF_SETUP_PAGES 4
+#define QDIO_DBF_SETUP_PAGES 8
#define QDIO_DBF_SETUP_NR_AREAS 1
#define QDIO_DBF_TRACE_LEN 8
#define QDIO_DBF_TRACE_NR_AREAS 2
#ifdef CONFIG_QDIO_DEBUG
-#define QDIO_DBF_TRACE_PAGES 16
+#define QDIO_DBF_TRACE_PAGES 32
#define QDIO_DBF_SETUP_LEVEL 6
#define QDIO_DBF_TRACE_LEVEL 4
#else /* !CONFIG_QDIO_DEBUG */
-#define QDIO_DBF_TRACE_PAGES 4
+#define QDIO_DBF_TRACE_PAGES 8
#define QDIO_DBF_SETUP_LEVEL 2
#define QDIO_DBF_TRACE_LEVEL 2
#endif /* CONFIG_QDIO_DEBUG */
int cc;
u32 busy_bit;
u64 start_time = 0;
+ char dbf_text[15];
QDIO_DBF_TEXT5(0, trace, "sigaout");
QDIO_DBF_HEX5(0, trace, &q, sizeof(void *));
again:
cc = qdio_do_siga_output(q, &busy_bit);
if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) {
+ sprintf(dbf_text, "bb%4x%2x", q->irq_ptr->schid.sch_no, q->nr);
+ QDIO_DBF_TEXT3(0, trace, dbf_text);
+
if (!start_time)
start_time = get_usecs();
else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE)
rc = qdio_siga_output(q);
switch (rc) {
case 0:
- /* went smooth this time, reset timestamp */
- q->u.out.timestamp = 0;
-
/* TODO: improve error handling for CC=0 case */
#ifdef CONFIG_QDIO_DEBUG
- QDIO_DBF_TEXT3(0, trace, "cc2reslv");
- sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr,
- atomic_read(&q->u.out.busy_siga_counter));
- QDIO_DBF_TEXT3(0, trace, dbf_text);
+ if (q->u.out.timestamp) {
+ QDIO_DBF_TEXT3(0, trace, "cc2reslv");
+ sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no,
+ q->nr,
+ atomic_read(&q->u.out.busy_siga_counter));
+ QDIO_DBF_TEXT3(0, trace, dbf_text);
+ }
#endif /* CONFIG_QDIO_DEBUG */
+ /* went smooth this time, reset timestamp */
+ q->u.out.timestamp = 0;
break;
/* cc=2 and busy bit */
case (2 | QDIO_ERROR_SIGA_BUSY):
if (IS_ERR(irb)) {
switch (PTR_ERR(irb)) {
case -EIO:
- sprintf(dbf_text, "ierr%4x",
- cdev->private->schid.sch_no);
+ sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no);
QDIO_DBF_TEXT2(1, setup, dbf_text);
qdio_int_error(cdev);
return;
case -ETIMEDOUT:
- sprintf(dbf_text, "qtoh%4x",
- cdev->private->schid.sch_no);
+ sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no);
QDIO_DBF_TEXT2(1, setup, dbf_text);
qdio_int_error(cdev);
return;
struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev)
{
struct qdio_irq *irq_ptr;
+ char dbf_text[15];
- QDIO_DBF_TEXT0(0, setup, "getssqd");
+ sprintf(dbf_text, "qssq%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
char dbf_text[15];
int rc;
+ sprintf(dbf_text, "qcln%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
- sprintf(dbf_text, "qcln%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT1(0, trace, dbf_text);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
-
rc = qdio_shutdown(cdev, how);
if (rc == 0)
rc = qdio_free(cdev);
unsigned long flags;
char dbf_text[15];
+ sprintf(dbf_text, "qshu%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
return 0;
}
- sprintf(dbf_text, "qsqs%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT1(0, trace, dbf_text);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
-
tiqdio_remove_input_queues(irq_ptr);
qdio_shutdown_queues(cdev);
qdio_shutdown_debug_entries(irq_ptr, cdev);
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
mutex_unlock(&irq_ptr->setup_mutex);
- module_put(THIS_MODULE);
if (rc)
return rc;
return 0;
struct qdio_irq *irq_ptr;
char dbf_text[15];
+ sprintf(dbf_text, "qfre%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
mutex_lock(&irq_ptr->setup_mutex);
-
- sprintf(dbf_text, "qfqs%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT1(0, trace, dbf_text);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
-
cdev->private->qdio_data = NULL;
mutex_unlock(&irq_ptr->setup_mutex);
sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no);
QDIO_DBF_TEXT0(0, setup, dbf_text);
- QDIO_DBF_TEXT0(0, trace, dbf_text);
rc = qdio_allocate(init_data);
if (rc)
sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no);
QDIO_DBF_TEXT0(0, setup, dbf_text);
- QDIO_DBF_TEXT0(0, trace, dbf_text);
if ((init_data->no_input_qs && !init_data->input_handler) ||
(init_data->no_output_qs && !init_data->output_handler))
unsigned long saveflags;
int rc;
+ sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
if (cdev->private->state != DEV_STATE_ONLINE)
return -EINVAL;
- if (!try_module_get(THIS_MODULE))
- return -EINVAL;
-
- sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
- QDIO_DBF_TEXT0(0, trace, dbf_text);
-
mutex_lock(&irq_ptr->setup_mutex);
qdio_setup_irq(init_data);
unsigned long saveflags;
char dbf_text[20];
+ sprintf(dbf_text, "qact%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
goto out;
}
- sprintf(dbf_text, "qact%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT2(0, setup, dbf_text);
- QDIO_DBF_TEXT2(0, trace, dbf_text);
-
irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
irq_ptr->ccw.flags = CCW_FLAG_SLI;
irq_ptr->ccw.count = irq_ptr->aqueue.count;
#ifdef CONFIG_QDIO_DEBUG
char dbf_text[20];
- sprintf(dbf_text, "doQD%04x", cdev->private->schid.sch_no);
+ sprintf(dbf_text, "doQD%4x", cdev->private->schid.sch_no);
QDIO_DBF_TEXT3(0, trace, dbf_text);
#endif /* CONFIG_QDIO_DEBUG */
void **output_sbal_array = qdio_init->output_sbal_addr_array;
int i;
- sprintf(dbf_text, "qfqs%4x", qdio_init->cdev->private->schid.sch_no);
+ sprintf(dbf_text, "qset%4x", qdio_init->cdev->private->schid.sch_no);
QDIO_DBF_TEXT0(0, setup, dbf_text);
for_each_input_queue(irq_ptr, q, i) {
rc = __get_ssqd_info(irq_ptr);
if (rc) {
QDIO_DBF_TEXT2(0, setup, "ssqdasig");
- sprintf(dbf_text, "schno%x", irq_ptr->schid.sch_no);
+ sprintf(dbf_text, "schn%4x", irq_ptr->schid.sch_no);
QDIO_DBF_TEXT2(0, setup, dbf_text);
sprintf(dbf_text, "rc:%d", rc);
QDIO_DBF_TEXT2(0, setup, dbf_text);
{
char s[80];
- sprintf(s, "%s ", cdev->dev.bus_id);
+ sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no);
switch (irq_ptr->qib.qfmt) {
case QDIO_QETH_QFMT:
struct qdio_q *q;
int i;
- for_each_input_queue(irq_ptr, q, i) {
+ for (i = 0; i < irq_ptr->nr_input_qs; i++) {
+ q = irq_ptr->input_qs[i];
+ /* if establish triggered an error */
+ if (!q || !q->entry.prev || !q->entry.next)
+ continue;
list_del_rcu(&q->entry);
synchronize_rcu();
}
#undef DEBUGDATA
#undef DEBUGCCW
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/i2o-dev.h>
-#include <linux/version.h>
#include <linux/notifier.h>
#include <asm/atomic.h>
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/stddef.h>
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#ifndef _IPS_H_
#define _IPS_H_
-#include <linux/version.h>
#include <linux/nmi.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
-#include <linux/version.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
* 1.2: PowerPC (big endian) support.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#ifndef _NSP32_H
#define _NSP32_H
-#include <linux/version.h>
//#define NSP32_DEBUG 9
/*
***********************************************************************/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
*/
#include "qla_def.h"
-#include <linux/version.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <linux/smp_lock.h>
If you don't know what to do here, say N.
+config UIO_PDRV_GENIRQ
+ tristate "Userspace I/O platform driver with generic IRQ handling"
+ help
+ Platform driver for Userspace I/O devices, including generic
+ interrupt handling code. Shared interrupts are not supported.
+
+ This kernel driver requires that the matching userspace driver
+ handles interrupts in a special way. Userspace is responsible
+ for acknowledging the hardware device if needed, and re-enabling
+ interrupts in the interrupt controller using the write() syscall.
+
+ If you don't know what to do here, say N.
+
config UIO_SMX
tristate "SMX cryptengine UIO interface"
default n
obj-$(CONFIG_UIO) += uio.o
obj-$(CONFIG_UIO_CIF) += uio_cif.o
obj-$(CONFIG_UIO_PDRV) += uio_pdrv.o
+obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o
obj-$(CONFIG_UIO_SMX) += uio_smx.o
uio_unregister_device(pdata->uioinfo);
+ kfree(pdata);
+
return 0;
}
MODULE_AUTHOR("Uwe Kleine-Koenig");
MODULE_DESCRIPTION("Userspace I/O platform driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRIVER_NAME);
--- /dev/null
+/*
+ * drivers/uio/uio_pdrv_genirq.c
+ *
+ * Userspace I/O platform driver with generic IRQ handling code.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on uio_pdrv.c by Uwe Kleine-Koenig,
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+
+#define DRIVER_NAME "uio_pdrv_genirq"
+
+struct uio_pdrv_genirq_platdata {
+ struct uio_info *uioinfo;
+ spinlock_t lock;
+ unsigned long flags;
+};
+
+static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
+{
+ struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+
+ /* Just disable the interrupt in the interrupt controller, and
+ * remember the state so we can allow user space to enable it later.
+ */
+
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq_nosync(irq);
+
+ return IRQ_HANDLED;
+}
+
+static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+ struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+ unsigned long flags;
+
+ /* Allow user space to enable and disable the interrupt
+ * in the interrupt controller, but keep track of the
+ * state to prevent per-irq depth damage.
+ *
+ * Serialize this operation to support multiple tasks.
+ */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (irq_on) {
+ if (test_and_clear_bit(0, &priv->flags))
+ enable_irq(dev_info->irq);
+ } else {
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq(dev_info->irq);
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int uio_pdrv_genirq_probe(struct platform_device *pdev)
+{
+ struct uio_info *uioinfo = pdev->dev.platform_data;
+ struct uio_pdrv_genirq_platdata *priv;
+ struct uio_mem *uiomem;
+ int ret = -EINVAL;
+ int i;
+
+ if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+ dev_err(&pdev->dev, "missing platform_data\n");
+ goto bad0;
+ }
+
+ if (uioinfo->handler || uioinfo->irqcontrol || uioinfo->irq_flags) {
+ dev_err(&pdev->dev, "interrupt configuration error\n");
+ goto bad0;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "unable to kmalloc\n");
+ goto bad0;
+ }
+
+ priv->uioinfo = uioinfo;
+ spin_lock_init(&priv->lock);
+ priv->flags = 0; /* interrupt is enabled to begin with */
+
+ uiomem = &uioinfo->mem[0];
+
+ for (i = 0; i < pdev->num_resources; ++i) {
+ struct resource *r = &pdev->resource[i];
+
+ if (r->flags != IORESOURCE_MEM)
+ continue;
+
+ if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+ dev_warn(&pdev->dev, "device has more than "
+ __stringify(MAX_UIO_MAPS)
+ " I/O memory resources.\n");
+ break;
+ }
+
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = r->start;
+ uiomem->size = r->end - r->start + 1;
+ ++uiomem;
+ }
+
+ while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+ uiomem->size = 0;
+ ++uiomem;
+ }
+
+ /* This driver requires no hardware specific kernel code to handle
+ * interrupts. Instead, the interrupt handler simply disables the
+ * interrupt in the interrupt controller. User space is responsible
+ * for performing hardware specific acknowledge and re-enabling of
+ * the interrupt in the interrupt controller.
+ *
+ * Interrupt sharing is not supported.
+ */
+
+ uioinfo->irq_flags = IRQF_DISABLED;
+ uioinfo->handler = uio_pdrv_genirq_handler;
+ uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
+ uioinfo->priv = priv;
+
+ ret = uio_register_device(&pdev->dev, priv->uioinfo);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to register uio device\n");
+ goto bad1;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ return 0;
+ bad1:
+ kfree(priv);
+ bad0:
+ return ret;
+}
+
+static int uio_pdrv_genirq_remove(struct platform_device *pdev)
+{
+ struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
+
+ uio_unregister_device(priv->uioinfo);
+ kfree(priv);
+ return 0;
+}
+
+static struct platform_driver uio_pdrv_genirq = {
+ .probe = uio_pdrv_genirq_probe,
+ .remove = uio_pdrv_genirq_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init uio_pdrv_genirq_init(void)
+{
+ return platform_driver_register(&uio_pdrv_genirq);
+}
+
+static void __exit uio_pdrv_genirq_exit(void)
+{
+ platform_driver_unregister(&uio_pdrv_genirq);
+}
+
+module_init(uio_pdrv_genirq_init);
+module_exit(uio_pdrv_genirq_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
#include <linux/ctype.h>
#include <linux/sched.h>
#include <linux/kthread.h>
-#include <linux/version.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
tasklet_schedule(&acm->urb_task);
done:
-err_out:
mutex_unlock(&acm->mutex);
+err_out:
mutex_unlock(&open_mutex);
return rv;
{ USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
*/
intf->pm_usage_cnt = !(driver->supports_autosuspend);
+ /* Carry out a deferred switch to altsetting 0 */
+ if (intf->needs_altsetting0) {
+ usb_set_interface(udev, intf->altsetting[0].
+ desc.bInterfaceNumber, 0);
+ intf->needs_altsetting0 = 0;
+ }
+
error = driver->probe(intf, id);
if (error) {
mark_quiesced(intf);
driver->disconnect(intf);
- /* reset other interface state */
- usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+ /* Reset other interface state.
+ * We cannot do a Set-Interface if the device is suspended or
+ * if it is prepared for a system sleep (since installing a new
+ * altsetting means creating new endpoint device entries).
+ * When either of these happens, defer the Set-Interface.
+ */
+ if (!error && intf->dev.power.status == DPM_ON)
+ usb_set_interface(udev, intf->altsetting[0].
+ desc.bInterfaceNumber, 0);
+ else
+ intf->needs_altsetting0 = 1;
usb_set_intfdata(intf, NULL);
intf->condition = USB_INTERFACE_UNBOUND;
* The caller must hold @intf's device's lock, but not its pm_mutex
* and not @intf->dev.sem.
*
- * FIXME: The caller must block system sleep transitions.
+ * Note: Rebinds will be skipped if a system sleep transition is in
+ * progress and the PM "complete" callback hasn't occurred yet.
*/
void usb_rebind_intf(struct usb_interface *intf)
{
}
/* Try to rebind the interface */
- intf->needs_binding = 0;
- rc = device_attach(&intf->dev);
- if (rc < 0)
- dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+ if (intf->dev.power.status == DPM_ON) {
+ intf->needs_binding = 0;
+ rc = device_attach(&intf->dev);
+ if (rc < 0)
+ dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+ }
}
#ifdef CONFIG_PM
* or rebind interfaces that have been unbound, according to @action.
*
* The caller must hold @udev's device lock.
- * FIXME: For rebinds, the caller must block system sleep transitions.
*/
static void do_unbind_rebind(struct usb_device *udev, int action)
{
}
break;
case DO_REBIND:
- if (intf->needs_binding) {
-
- /* FIXME: The next line is needed because we are going to probe
- * the interface, but as far as the PM core is concerned the
- * interface is still suspended. The problem wouldn't exist
- * if we could rebind the interface during the interface's own
- * resume() call, but at the time the usb_device isn't locked!
- *
- * The real solution will be to carry this out during the device's
- * complete() callback. Until that is implemented, we have to
- * use this hack.
- */
-// intf->dev.power.sleeping = 0;
-
+ if (intf->needs_binding)
usb_rebind_intf(intf);
- }
break;
}
}
}
/* Caller has locked intf's usb_device's pm mutex */
-static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
+static int usb_suspend_interface(struct usb_device *udev,
+ struct usb_interface *intf, pm_message_t msg)
{
struct usb_driver *driver;
int status = 0;
/* with no hardware, USB interfaces only use FREEZE and ON states */
- if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
- !is_active(intf))
+ if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf))
goto done;
if (intf->condition == USB_INTERFACE_UNBOUND) /* This can't happen */
status = driver->suspend(intf, msg);
if (status == 0)
mark_quiesced(intf);
- else if (!interface_to_usbdev(intf)->auto_pm)
+ else if (!udev->auto_pm)
dev_err(&intf->dev, "%s error %d\n",
"suspend", status);
} else {
}
/* Caller has locked intf's usb_device's pm_mutex */
-static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
+static int usb_resume_interface(struct usb_device *udev,
+ struct usb_interface *intf, int reset_resume)
{
struct usb_driver *driver;
int status = 0;
- if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
- is_active(intf))
+ if (udev->state == USB_STATE_NOTATTACHED || is_active(intf))
goto done;
/* Don't let autoresume interfere with unbinding */
goto done;
/* Can't resume it if it doesn't have a driver. */
- if (intf->condition == USB_INTERFACE_UNBOUND)
+ if (intf->condition == USB_INTERFACE_UNBOUND) {
+
+ /* Carry out a deferred switch to altsetting 0 */
+ if (intf->needs_altsetting0 &&
+ intf->dev.power.status == DPM_ON) {
+ usb_set_interface(udev, intf->altsetting[0].
+ desc.bInterfaceNumber, 0);
+ intf->needs_altsetting0 = 0;
+ }
goto done;
+ }
/* Don't resume if the interface is marked for rebinding */
if (intf->needs_binding)
if (udev->actconfig) {
for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
- status = usb_suspend_interface(intf, msg);
+ status = usb_suspend_interface(udev, intf, msg);
if (status != 0)
break;
}
if (status != 0) {
while (--i >= 0) {
intf = udev->actconfig->interface[i];
- usb_resume_interface(intf, 0);
+ usb_resume_interface(udev, intf, 0);
}
/* Try another autosuspend when the interfaces aren't busy */
if (status == 0 && udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
- usb_resume_interface(intf, udev->reset_resume);
+ usb_resume_interface(udev, intf, udev->reset_resume);
}
}
return status;
}
-static int usb_suspend(struct device *dev, pm_message_t message)
+int usb_suspend(struct device *dev, pm_message_t message)
{
struct usb_device *udev;
- if (!is_usb_device(dev)) /* Ignore PM for interfaces */
- return 0;
udev = to_usb_device(dev);
/* If udev is already suspended, we can skip this suspend and
return usb_external_suspend_device(udev, message);
}
-static int usb_resume(struct device *dev)
+int usb_resume(struct device *dev)
{
struct usb_device *udev;
- if (!is_usb_device(dev)) /* Ignore PM for interfaces */
- return 0;
udev = to_usb_device(dev);
/* If udev->skip_sys_resume is set then udev was already suspended
return usb_external_resume_device(udev);
}
-#else
-
-#define usb_suspend NULL
-#define usb_resume NULL
-
#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
.name = "usb",
.match = usb_device_match,
.uevent = usb_uevent,
- .suspend = usb_suspend,
- .resume = usb_resume,
};
return retval;
}
-void usb_enable_root_hub_irq (struct usb_bus *bus)
-{
- struct usb_hcd *hcd;
-
- hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
- hcd->driver->hub_irq_enable (hcd);
-}
-
/*-------------------------------------------------------------------------*/
int (*bus_suspend)(struct usb_hcd *);
int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
- void (*hub_irq_enable)(struct usb_hcd *);
- /* Needed only if port-change IRQs are level-triggered */
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
extern struct mutex usb_bus_list_lock;
extern wait_queue_head_t usb_kill_urb_queue;
-extern void usb_enable_root_hub_irq(struct usb_bus *bus);
-
extern int usb_find_interface_driver(struct usb_device *dev,
struct usb_interface *interface);
}
clear_bit(port1, hub->busy_bits);
- if (!hub->hdev->parent && !hub->busy_bits[0])
- usb_enable_root_hub_irq(hub->hdev->bus);
status = check_port_resume_type(udev,
hub, port1, status, portchange, portstatus);
}
}
- /* If this is a root hub, tell the HCD it's okay to
- * re-enable port-change interrupts now. */
- if (!hdev->parent && !hub->busy_bits[0])
- usb_enable_root_hub_irq(hdev->bus);
-
loop_autopm:
/* Allow autosuspend if we're not going to run again */
if (list_empty(&hub->event_list))
break;
}
clear_bit(port1, parent_hub->busy_bits);
- if (!parent_hdev->parent && !parent_hub->busy_bits[0])
- usb_enable_root_hub_irq(parent_hdev->bus);
if (ret < 0)
goto re_enumerate;
void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
+ unsigned long flags;
- spin_lock_irq(&anchor->lock);
+ spin_lock_irqsave(&anchor->lock, flags);
while (!list_empty(&anchor->urb_list)) {
victim = list_entry(anchor->urb_list.prev, struct urb,
anchor_list);
+ usb_get_urb(victim);
+ spin_unlock_irqrestore(&anchor->lock, flags);
/* this will unanchor the URB */
usb_unlink_urb(victim);
+ usb_put_urb(victim);
+ spin_lock_irqsave(&anchor->lock, flags);
}
- spin_unlock_irq(&anchor->lock);
+ spin_unlock_irqrestore(&anchor->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
}
#endif /* CONFIG_HOTPLUG */
-struct device_type usb_device_type = {
- .name = "usb_device",
- .release = usb_release_dev,
- .uevent = usb_dev_uevent,
-};
-
#ifdef CONFIG_PM
static int ksuspend_usb_init(void)
destroy_workqueue(ksuspend_usb_wq);
}
+/* USB device Power-Management thunks.
+ * There's no need to distinguish here between quiescing a USB device
+ * and powering it down; the generic_suspend() routine takes care of
+ * it by skipping the usb_port_suspend() call for a quiesce. And for
+ * USB interfaces there's no difference at all.
+ */
+
+static int usb_dev_prepare(struct device *dev)
+{
+ return 0; /* Implement eventually? */
+}
+
+static void usb_dev_complete(struct device *dev)
+{
+ /* Currently used only for rebinding interfaces */
+ usb_resume(dev); /* Implement eventually? */
+}
+
+static int usb_dev_suspend(struct device *dev)
+{
+ return usb_suspend(dev, PMSG_SUSPEND);
+}
+
+static int usb_dev_resume(struct device *dev)
+{
+ return usb_resume(dev);
+}
+
+static int usb_dev_freeze(struct device *dev)
+{
+ return usb_suspend(dev, PMSG_FREEZE);
+}
+
+static int usb_dev_thaw(struct device *dev)
+{
+ return usb_resume(dev);
+}
+
+static int usb_dev_poweroff(struct device *dev)
+{
+ return usb_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int usb_dev_restore(struct device *dev)
+{
+ return usb_resume(dev);
+}
+
+static struct pm_ops usb_device_pm_ops = {
+ .prepare = usb_dev_prepare,
+ .complete = usb_dev_complete,
+ .suspend = usb_dev_suspend,
+ .resume = usb_dev_resume,
+ .freeze = usb_dev_freeze,
+ .thaw = usb_dev_thaw,
+ .poweroff = usb_dev_poweroff,
+ .restore = usb_dev_restore,
+};
+
#else
#define ksuspend_usb_init() 0
#define ksuspend_usb_cleanup() do {} while (0)
+#define usb_device_pm_ops (*(struct pm_ops *)0)
#endif /* CONFIG_PM */
+struct device_type usb_device_type = {
+ .name = "usb_device",
+ .release = usb_release_dev,
+ .uevent = usb_dev_uevent,
+ .pm = &usb_device_pm_ops,
+};
+
/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
static unsigned usb_bus_is_wusb(struct usb_bus *bus)
#ifdef CONFIG_PM
+extern int usb_suspend(struct device *dev, pm_message_t msg);
+extern int usb_resume(struct device *dev);
+
extern void usb_autosuspend_work(struct work_struct *work);
extern int usb_port_suspend(struct usb_device *dev);
extern int usb_port_resume(struct usb_device *dev);
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
struct pxa_udc *udc = the_controller;
int retval;
- if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+ if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind
|| !driver->disconnect || !driver->setup)
return -EINVAL;
if (!udc)
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/version.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
/*
* write bank1 address twice to ensure the 90ns delay (time
* between BANK0 write and the priv_read_copy() call is at
- * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+ * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns)
*/
isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs +
HC_MEMORY_REG);
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
/*-------------------------------------------------------------------------*/
-/* hcd->hub_irq_enable() */
-static void ohci_rhsc_enable (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-
- spin_lock_irq(&ohci->lock);
- if (!ohci->autostop)
- del_timer(&hcd->rh_timer); /* Prevent next poll */
- ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
- spin_unlock_irq(&ohci->lock);
-}
-
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
int any_connected)
{
int poll_rh = 1;
+ int rhsc;
+ rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- /* keep on polling until we know a device is connected
- * and RHSC is enabled */
+ /* If no status changes are pending, enable status-change
+ * interrupts.
+ */
+ if (!rhsc && !changed) {
+ rhsc = OHCI_INTR_RHSC;
+ ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
+ }
+
+ /* Keep on polling until we know a device is connected
+ * and RHSC is enabled, or until we autostop.
+ */
if (!ohci->autostop) {
if (any_connected ||
!device_may_wakeup(&ohci_to_hcd(ohci)
->self.root_hub->dev)) {
- if (ohci_readl(ohci, &ohci->regs->intrenable) &
- OHCI_INTR_RHSC)
+ if (rhsc)
poll_rh = 0;
} else {
ohci->autostop = 1;
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (time_after_eq(jiffies,
+ } else if (rhsc && time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
OHCI_SCHED_ENABLES)) {
ohci_rh_suspend(ohci, 1);
+ poll_rh = 0;
}
}
break;
else
usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
} else {
+ if (!rhsc && (ohci->autostop ||
+ ohci_to_hcd(ohci)->self.root_hub->
+ do_remote_wakeup))
+ ohci_writel(ohci, OHCI_INTR_RHSC,
+ &ohci->regs->intrenable);
+
/* everything is idle, no need for polling */
poll_rh = 0;
}
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
- int poll_rh = 1;
-
- /* keep on polling until RHSC is enabled */
+ /* If RHSC is enabled, don't poll */
if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
- poll_rh = 0;
- return poll_rh;
+ return 0;
+
+ /* If no status changes are pending, enable status-change interrupts */
+ if (!changed) {
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ return 0;
+ }
+ return 1;
}
#endif /* CONFIG_PM */
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
.start_port_reset = ohci_start_port_reset,
#if defined(CONFIG_PM)
.bus_suspend = ohci_bus_suspend,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
return 0;
}
-static void u132_hub_irq_enable(struct usb_hcd *hcd)
-{
- struct u132 *u132 = hcd_to_u132(hcd);
- if (u132->going > 1) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
- } else if (u132->going > 0)
- dev_err(&u132->platform_dev->dev, "device is being removed\n");
-}
-
#ifdef CONFIG_PM
static int u132_bus_suspend(struct usb_hcd *hcd)
.bus_suspend = u132_bus_suspend,
.bus_resume = u132_bus_resume,
.start_port_reset = u132_start_port_reset,
- .hub_irq_enable = u132_hub_irq_enable,
};
/*
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/poll.h>
-#include <linux/version.h>
#include <linux/usb/iowarrior.h>
/* Version Information */
{ USB_DEVICE(0x0711, 0x0900) },
{ USB_DEVICE(0x0711, 0x0901) },
{ USB_DEVICE(0x0711, 0x0902) },
+ { USB_DEVICE(0x0711, 0x0918) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
help
Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
-config USB_MUSB_LOGLEVEL
+config USB_MUSB_DEBUG
depends on USB_MUSB_HDRC
- int 'Logging Level (0 - none / 3 - annoying / ... )'
- default 0
+ bool "Enable debugging messages"
+ default n
help
- Set the logging level. 0 disables the debugging altogether,
- although when USB_DEBUG is set the value is at least 1.
- Starting at level 3, per-transfer (urb, usb_request, packet,
- or dma transfer) tracing may kick in.
+ This enables musb debugging. To set the logging level use the debug
+ module parameter. Starting at level 3, per-transfer (urb, usb_request,
+ packet, or dma transfer) tracing may kick in.
# Debugging
-MUSB_DEBUG:=$(CONFIG_USB_MUSB_LOGLEVEL)
-
-ifeq ("$(strip $(MUSB_DEBUG))","")
- ifdef CONFIG_USB_DEBUG
- MUSB_DEBUG:=1
- else
- MUSB_DEBUG:=0
- endif
+ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
+ EXTRA_CFLAGS += -DDEBUG
endif
-
-ifneq ($(MUSB_DEBUG),0)
- EXTRA_CFLAGS += -DDEBUG
-
- ifeq ($(CONFIG_PROC_FS),y)
- musb_hdrc-objs += musb_procfs.o
- endif
-
-endif
-
-EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG)
-#if MUSB_DEBUG > 0
-unsigned debug = MUSB_DEBUG;
-module_param(debug, uint, 0);
-MODULE_PARM_DESC(debug, "initial debug message level");
-
-#define MUSB_VERSION_SUFFIX "/dbg"
-#endif
+unsigned debug;
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
-#define MUSB_VERSION_BASE "6.0"
-
-#ifndef MUSB_VERSION_SUFFIX
-#define MUSB_VERSION_SUFFIX ""
-#endif
-#define MUSB_VERSION MUSB_VERSION_BASE MUSB_VERSION_SUFFIX
+#define MUSB_VERSION "6.0"
#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
musb->xceiv.state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+ if (status)
+ goto fail;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
musb->xceiv.state = OTG_STATE_B_IDLE;
status = musb_gadget_setup(musb);
+ if (status)
+ goto fail;
DBG(1, "%s mode, status %d, dev%02x\n",
is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
}
- if (status == 0)
- musb_debug_create("driver/musb_hdrc", musb);
- else {
+ return 0;
+
fail:
- if (musb->clock)
- clk_put(musb->clock);
- device_init_wakeup(dev, 0);
- musb_free(musb);
- return status;
- }
+ if (musb->clock)
+ clk_put(musb->clock);
+ device_init_wakeup(dev, 0);
+ musb_free(musb);
+ return status;
#ifdef CONFIG_SYSFS
status = device_create_file(dev, &dev_attr_mode);
* - OTG mode: both roles are deactivated (or never-activated)
*/
musb_shutdown(pdev);
- musb_debug_delete("driver/musb_hdrc", musb);
#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (musb->board_mode == MUSB_HOST)
usb_remove_hcd(musb_to_hcd(musb));
extern int __init musb_platform_init(struct musb *musb);
extern int musb_platform_exit(struct musb *musb);
-/*-------------------------- ProcFS definitions ---------------------*/
-
-struct proc_dir_entry;
-
-#if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS)
-extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data);
-extern void musb_debug_delete(char *name, struct musb *data);
-
-#else
-static inline struct proc_dir_entry *
-musb_debug_create(char *name, struct musb *data)
-{
- return NULL;
-}
-static inline void musb_debug_delete(char *name, struct musb *data)
-{
-}
-#endif
-
#endif /* __MUSB_CORE_H__ */
__func__, __LINE__ , ## args); \
} } while (0)
-#if MUSB_DEBUG > 0
extern unsigned debug;
-#else
-#define debug 0
-#endif
static inline int _dbg_level(unsigned l)
{
return;
musb->ackpend = 0;
}
+ musb_ep_select(musb->mregs, 0);
musb_writew(regs, MUSB_CSR0, tmp);
}
}
/* send it out, triggering a "txpktrdy cleared" irq */
+ musb_ep_select(musb->mregs, 0);
musb_writew(regs, MUSB_CSR0, csr);
}
+++ /dev/null
-/*
- * MUSB OTG driver debug support
- *
- * Copyright 2005 Mentor Graphics Corporation
- * Copyright (C) 2005-2006 by Texas Instruments
- * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h> /* FIXME remove procfs writes */
-#include <asm/arch/hardware.h>
-
-#include "musb_core.h"
-
-#include "davinci.h"
-
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-
-static int dump_qh(struct musb_qh *qh, char *buf, unsigned max)
-{
- int count;
- int tmp;
- struct usb_host_endpoint *hep = qh->hep;
- struct urb *urb;
-
- count = snprintf(buf, max, " qh %p dev%d ep%d%s max%d\n",
- qh, qh->dev->devnum, qh->epnum,
- ({ char *s; switch (qh->type) {
- case USB_ENDPOINT_XFER_BULK:
- s = "-bulk"; break;
- case USB_ENDPOINT_XFER_INT:
- s = "-int"; break;
- case USB_ENDPOINT_XFER_CONTROL:
- s = ""; break;
- default:
- s = "iso"; break;
- }; s; }),
- qh->maxpacket);
- if (count <= 0)
- return 0;
- buf += count;
- max -= count;
-
- list_for_each_entry(urb, &hep->urb_list, urb_list) {
- tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n",
- usb_pipein(urb->pipe) ? "in" : "out",
- urb, urb->actual_length,
- urb->transfer_buffer_length);
- if (tmp <= 0)
- break;
- tmp = min(tmp, (int)max);
- count += tmp;
- buf += tmp;
- max -= tmp;
- }
- return count;
-}
-
-static int
-dump_queue(struct list_head *q, char *buf, unsigned max)
-{
- int count = 0;
- struct musb_qh *qh;
-
- list_for_each_entry(qh, q, ring) {
- int tmp;
-
- tmp = dump_qh(qh, buf, max);
- if (tmp <= 0)
- break;
- tmp = min(tmp, (int)max);
- count += tmp;
- buf += tmp;
- max -= tmp;
- }
- return count;
-}
-
-#endif /* HCD */
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max)
-{
- char *buf = buffer;
- int code = 0;
- void __iomem *regs = ep->hw_ep->regs;
- char *mode = "1buf";
-
- if (ep->is_in) {
- if (ep->hw_ep->tx_double_buffered)
- mode = "2buf";
- } else {
- if (ep->hw_ep->rx_double_buffered)
- mode = "2buf";
- }
-
- do {
- struct usb_request *req;
-
- code = snprintf(buf, max,
- "\n%s (hw%d): %s%s, csr %04x maxp %04x\n",
- ep->name, ep->current_epnum,
- mode, ep->dma ? " dma" : "",
- musb_readw(regs,
- (ep->is_in || !ep->current_epnum)
- ? MUSB_TXCSR
- : MUSB_RXCSR),
- musb_readw(regs, ep->is_in
- ? MUSB_TXMAXP
- : MUSB_RXMAXP)
- );
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
-
- if (is_cppi_enabled() && ep->current_epnum) {
- unsigned cppi = ep->current_epnum - 1;
- void __iomem *base = ep->musb->ctrl_base;
- unsigned off1 = cppi << 2;
- void __iomem *ram = base;
- char tmp[16];
-
- if (ep->is_in) {
- ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi);
- tmp[0] = 0;
- } else {
- ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi);
- snprintf(tmp, sizeof tmp, "%d left, ",
- musb_readl(base,
- DAVINCI_RXCPPI_BUFCNT0_REG + off1));
- }
-
- code = snprintf(buf, max, "%cX DMA%d: %s"
- "%08x %08x, %08x %08x; "
- "%08x %08x %08x .. %08x\n",
- ep->is_in ? 'T' : 'R',
- ep->current_epnum - 1, tmp,
- musb_readl(ram, 0 * 4),
- musb_readl(ram, 1 * 4),
- musb_readl(ram, 2 * 4),
- musb_readl(ram, 3 * 4),
- musb_readl(ram, 4 * 4),
- musb_readl(ram, 5 * 4),
- musb_readl(ram, 6 * 4),
- musb_readl(ram, 7 * 4));
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
-
- if (list_empty(&ep->req_list)) {
- code = snprintf(buf, max, "\t(queue empty)\n");
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- break;
- }
- list_for_each_entry(req, &ep->req_list, list) {
- code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n",
- req,
- req->zero ? "zero, " : "",
- req->short_not_ok ? "!short, " : "",
- req->actual, req->length);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- } while (0);
- return buf - buffer;
-}
-#endif
-
-static int
-dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
-{
- int code = 0;
- char *buf = aBuffer;
- struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
-
- do {
- musb_ep_select(musb->mregs, epnum);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- if (is_host_active(musb)) {
- int dump_rx, dump_tx;
- void __iomem *regs = hw_ep->regs;
-
- /* TEMPORARY (!) until we have a real periodic
- * schedule tree ...
- */
- if (!epnum) {
- /* control is shared, uses RX queue
- * but (mostly) shadowed tx registers
- */
- dump_tx = !list_empty(&musb->control);
- dump_rx = 0;
- } else if (hw_ep == musb->bulk_ep) {
- dump_tx = !list_empty(&musb->out_bulk);
- dump_rx = !list_empty(&musb->in_bulk);
- } else if (musb->periodic[epnum]) {
- struct usb_host_endpoint *hep;
-
- hep = musb->periodic[epnum]->hep;
- dump_rx = hep->desc.bEndpointAddress
- & USB_ENDPOINT_DIR_MASK;
- dump_tx = !dump_rx;
- } else
- break;
- /* END TEMPORARY */
-
-
- if (dump_rx) {
- code = snprintf(buf, max,
- "\nRX%d: %s rxcsr %04x interval %02x "
- "max %04x type %02x; "
- "dev %d hub %d port %d"
- "\n",
- epnum,
- hw_ep->rx_double_buffered
- ? "2buf" : "1buf",
- musb_readw(regs, MUSB_RXCSR),
- musb_readb(regs, MUSB_RXINTERVAL),
- musb_readw(regs, MUSB_RXMAXP),
- musb_readb(regs, MUSB_RXTYPE),
- /* FIXME: assumes multipoint */
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_RXFUNCADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_RXHUBADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_RXHUBPORT))
- );
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
-
- if (is_cppi_enabled()
- && epnum
- && hw_ep->rx_channel) {
- unsigned cppi = epnum - 1;
- unsigned off1 = cppi << 2;
- void __iomem *base;
- void __iomem *ram;
- char tmp[16];
-
- base = musb->ctrl_base;
- ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
- cppi) + base;
- snprintf(tmp, sizeof tmp, "%d left, ",
- musb_readl(base,
- DAVINCI_RXCPPI_BUFCNT0_REG
- + off1));
-
- code = snprintf(buf, max,
- " rx dma%d: %s"
- "%08x %08x, %08x %08x; "
- "%08x %08x %08x .. %08x\n",
- cppi, tmp,
- musb_readl(ram, 0 * 4),
- musb_readl(ram, 1 * 4),
- musb_readl(ram, 2 * 4),
- musb_readl(ram, 3 * 4),
- musb_readl(ram, 4 * 4),
- musb_readl(ram, 5 * 4),
- musb_readl(ram, 6 * 4),
- musb_readl(ram, 7 * 4));
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
-
- if (hw_ep == musb->bulk_ep
- && !list_empty(
- &musb->in_bulk)) {
- code = dump_queue(&musb->in_bulk,
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- } else if (musb->periodic[epnum]) {
- code = dump_qh(musb->periodic[epnum],
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- }
-
- if (dump_tx) {
- code = snprintf(buf, max,
- "\nTX%d: %s txcsr %04x interval %02x "
- "max %04x type %02x; "
- "dev %d hub %d port %d"
- "\n",
- epnum,
- hw_ep->tx_double_buffered
- ? "2buf" : "1buf",
- musb_readw(regs, MUSB_TXCSR),
- musb_readb(regs, MUSB_TXINTERVAL),
- musb_readw(regs, MUSB_TXMAXP),
- musb_readb(regs, MUSB_TXTYPE),
- /* FIXME: assumes multipoint */
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_TXFUNCADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_TXHUBADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_TXHUBPORT))
- );
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
-
- if (is_cppi_enabled()
- && epnum
- && hw_ep->tx_channel) {
- unsigned cppi = epnum - 1;
- void __iomem *base;
- void __iomem *ram;
-
- base = musb->ctrl_base;
- ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
- cppi) + base;
- code = snprintf(buf, max,
- " tx dma%d: "
- "%08x %08x, %08x %08x; "
- "%08x %08x %08x .. %08x\n",
- cppi,
- musb_readl(ram, 0 * 4),
- musb_readl(ram, 1 * 4),
- musb_readl(ram, 2 * 4),
- musb_readl(ram, 3 * 4),
- musb_readl(ram, 4 * 4),
- musb_readl(ram, 5 * 4),
- musb_readl(ram, 6 * 4),
- musb_readl(ram, 7 * 4));
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
-
- if (hw_ep == musb->control_ep
- && !list_empty(
- &musb->control)) {
- code = dump_queue(&musb->control,
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- } else if (hw_ep == musb->bulk_ep
- && !list_empty(
- &musb->out_bulk)) {
- code = dump_queue(&musb->out_bulk,
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- } else if (musb->periodic[epnum]) {
- code = dump_qh(musb->periodic[epnum],
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- }
- }
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- if (is_peripheral_active(musb)) {
- code = 0;
-
- if (hw_ep->ep_in.desc || !epnum) {
- code = dump_ep(&hw_ep->ep_in, buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- if (hw_ep->ep_out.desc) {
- code = dump_ep(&hw_ep->ep_out, buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- }
-#endif
- } while (0);
-
- return buf - aBuffer;
-}
-
-/* Dump the current status and compile options.
- * @param musb the device driver instance
- * @param buffer where to dump the status; it must be big enough to hold the
- * result otherwise "BAD THINGS HAPPENS(TM)".
- */
-static int dump_header_stats(struct musb *musb, char *buffer)
-{
- int code, count = 0;
- const void __iomem *mbase = musb->mregs;
-
- *buffer = 0;
- count = sprintf(buffer, "Status: %sHDRC, Mode=%s "
- "(Power=%02x, DevCtl=%02x)\n",
- (musb->is_multipoint ? "M" : ""), MUSB_MODE(musb),
- musb_readb(mbase, MUSB_POWER),
- musb_readb(mbase, MUSB_DEVCTL));
- if (count <= 0)
- return 0;
- buffer += count;
-
- code = sprintf(buffer, "OTG state: %s; %sactive\n",
- otg_state_string(musb),
- musb->is_active ? "" : "in");
- if (code <= 0)
- goto done;
- buffer += code;
- count += code;
-
- code = sprintf(buffer,
- "Options: "
-#ifdef CONFIG_MUSB_PIO_ONLY
- "pio"
-#elif defined(CONFIG_USB_TI_CPPI_DMA)
- "cppi-dma"
-#elif defined(CONFIG_USB_INVENTRA_DMA)
- "musb-dma"
-#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
- "tusb-omap-dma"
-#else
- "?dma?"
-#endif
- ", "
-#ifdef CONFIG_USB_MUSB_OTG
- "otg (peripheral+host)"
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- "peripheral"
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
- "host"
-#endif
- ", debug=%d [eps=%d]\n",
- debug,
- musb->nr_endpoints);
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- code = sprintf(buffer, "Peripheral address: %02x\n",
- musb_readb(musb->ctrl_base, MUSB_FADDR));
- if (code <= 0)
- goto done;
- buffer += code;
- count += code;
-#endif
-
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- code = sprintf(buffer, "Root port status: %08x\n",
- musb->port1_status);
- if (code <= 0)
- goto done;
- buffer += code;
- count += code;
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI
- code = sprintf(buffer,
- "DaVinci: ctrl=%02x stat=%1x phy=%03x\n"
- "\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x"
- "\n",
- musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG),
- musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG),
- __raw_readl((void __force __iomem *)
- IO_ADDRESS(USBPHY_CTL_PADDR)),
- musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG),
- musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_USB_INT_SOURCE_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_USB_INT_MASK_REG));
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
-#endif /* DAVINCI */
-
-#ifdef CONFIG_USB_TUSB6010
- code = sprintf(buffer,
- "TUSB6010: devconf %08x, phy enable %08x drive %08x"
- "\n\totg %03x timer %08x"
- "\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x"
- "\n",
- musb_readl(musb->ctrl_base, TUSB_DEV_CONF),
- musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE),
- musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL),
- musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT),
- musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER),
- musb_readl(musb->ctrl_base, TUSB_PRCM_CONF),
- musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT),
- musb_readl(musb->ctrl_base, TUSB_INT_SRC),
- musb_readl(musb->ctrl_base, TUSB_INT_MASK));
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
-#endif /* DAVINCI */
-
- if (is_cppi_enabled() && musb->dma_controller) {
- code = sprintf(buffer,
- "CPPI: txcr=%d txsrc=%01x txena=%01x; "
- "rxcr=%d rxsrc=%01x rxena=%01x "
- "\n",
- musb_readl(musb->ctrl_base,
- DAVINCI_TXCPPI_CTRL_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_TXCPPI_RAW_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_TXCPPI_INTENAB_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_RXCPPI_CTRL_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_RXCPPI_RAW_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_RXCPPI_INTENAB_REG));
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
- }
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- if (is_peripheral_enabled(musb)) {
- code = sprintf(buffer, "Gadget driver: %s\n",
- musb->gadget_driver
- ? musb->gadget_driver->driver.name
- : "(none)");
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
- }
-#endif
-
-done:
- return count;
-}
-
-/* Write to ProcFS
- *
- * C soft-connect
- * c soft-disconnect
- * I enable HS
- * i disable HS
- * s stop session
- * F force session (OTG-unfriendly)
- * E rElinquish bus (OTG)
- * H request host mode
- * h cancel host request
- * T start sending TEST_PACKET
- * D<num> set/query the debug level
- */
-static int musb_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- char cmd;
- u8 reg;
- struct musb *musb = (struct musb *)data;
- void __iomem *mbase = musb->mregs;
-
- /* MOD_INC_USE_COUNT; */
-
- if (unlikely(copy_from_user(&cmd, buffer, 1)))
- return -EFAULT;
-
- switch (cmd) {
- case 'C':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- | MUSB_POWER_SOFTCONN;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'c':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- & ~MUSB_POWER_SOFTCONN;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'I':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- | MUSB_POWER_HSENAB;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'i':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- & ~MUSB_POWER_HSENAB;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'F':
- reg = musb_readb(mbase, MUSB_DEVCTL);
- reg |= MUSB_DEVCTL_SESSION;
- musb_writeb(mbase, MUSB_DEVCTL, reg);
- break;
-
- case 'H':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_DEVCTL);
- reg |= MUSB_DEVCTL_HR;
- musb_writeb(mbase, MUSB_DEVCTL, reg);
- /* MUSB_HST_MODE( ((struct musb*)data) ); */
- /* WARNING("Host Mode\n"); */
- }
- break;
-
- case 'h':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_DEVCTL);
- reg &= ~MUSB_DEVCTL_HR;
- musb_writeb(mbase, MUSB_DEVCTL, reg);
- }
- break;
-
- case 'T':
- if (mbase) {
- musb_load_testpacket(musb);
- musb_writeb(mbase, MUSB_TESTMODE,
- MUSB_TEST_PACKET);
- }
- break;
-
-#if (MUSB_DEBUG > 0)
- /* set/read debug level */
- case 'D':{
- if (count > 1) {
- char digits[8], *p = digits;
- int i = 0, level = 0, sign = 1;
- int len = min(count - 1, (unsigned long)8);
-
- if (copy_from_user(&digits, &buffer[1], len))
- return -EFAULT;
-
- /* optional sign */
- if (*p == '-') {
- len -= 1;
- sign = -sign;
- p++;
- }
-
- /* read it */
- while (i++ < len && *p > '0' && *p < '9') {
- level = level * 10 + (*p - '0');
- p++;
- }
-
- level *= sign;
- DBG(1, "debug level %d\n", level);
- debug = level;
- }
- }
- break;
-
-
- case '?':
- INFO("?: you are seeing it\n");
- INFO("C/c: soft connect enable/disable\n");
- INFO("I/i: hispeed enable/disable\n");
- INFO("F: force session start\n");
- INFO("H: host mode\n");
- INFO("T: start sending TEST_PACKET\n");
- INFO("D: set/read dbug level\n");
- break;
-#endif
-
- default:
- ERR("Command %c not implemented\n", cmd);
- break;
- }
-
- musb_platform_try_idle(musb, 0);
-
- return count;
-}
-
-static int musb_proc_read(char *page, char **start,
- off_t off, int count, int *eof, void *data)
-{
- char *buffer = page;
- int code = 0;
- unsigned long flags;
- struct musb *musb = data;
- unsigned epnum;
-
- count -= off;
- count -= 1; /* for NUL at end */
- if (count <= 0)
- return -EINVAL;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- code = dump_header_stats(musb, buffer);
- if (code > 0) {
- buffer += code;
- count -= code;
- }
-
- /* generate the report for the end points */
- /* REVISIT ... not unless something's connected! */
- for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints;
- epnum++) {
- code = dump_end_info(musb, epnum, buffer, count);
- if (code > 0) {
- buffer += code;
- count -= code;
- }
- }
-
- musb_platform_try_idle(musb, 0);
-
- spin_unlock_irqrestore(&musb->lock, flags);
- *eof = 1;
-
- return buffer - page;
-}
-
-void __devexit musb_debug_delete(char *name, struct musb *musb)
-{
- if (musb->proc_entry)
- remove_proc_entry(name, NULL);
-}
-
-struct proc_dir_entry *__init
-musb_debug_create(char *name, struct musb *data)
-{
- struct proc_dir_entry *pde;
-
- /* FIXME convert everything to seq_file; then later, debugfs */
-
- if (!name)
- return NULL;
-
- pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL);
- data->proc_entry = pde;
- if (pde) {
- pde->data = data;
- /* pde->owner = THIS_MODULE; */
-
- pde->read_proc = musb_proc_read;
- pde->write_proc = musb_proc_write;
-
- pde->size = 0;
-
- pr_debug("Registered /proc/%s\n", name);
- } else {
- pr_debug("Cannot create a valid proc file entry");
- }
-
- return pde;
-}
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <linux/version.h>
-
/* the mode to be set when the port ist opened */
static int initial_mode = 1;
#define KYOCERA_PRODUCT_KPC680 0x180a
#define ANYDATA_VENDOR_ID 0x16d5
+#define ANYDATA_PRODUCT_ADU_620UW 0x6202
#define ANYDATA_PRODUCT_ADU_E100A 0x6501
#define ANYDATA_PRODUCT_ADU_500A 0x6502
{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
* Code is based on s3fb
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
* which is based on the code of neofb.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#define _VERMILION_H_
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/pci.h>
#include <asm/atomic.h>
#include <linux/mutex.h>
* (http://davesdomain.org.uk/viafb/)
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
free_blocks =
percpu_counter_sum_and_set(&sbi->s_freeblocks_counter);
#endif
+ if (free_blocks <= root_blocks)
+ /* we don't have free space */
+ return 0;
if (free_blocks - root_blocks < nblocks)
return free_blocks - root_blocks;
return nblocks;
get_dtype(sb, fname->file_type));
if (error) {
filp->f_pos = curr_pos;
- info->extra_fname = fname->next;
+ info->extra_fname = fname;
return error;
}
fname = fname->next;
* If there are any leftover names on the hash collision
* chain, return them first.
*/
- if (info->extra_fname &&
- call_filldir(filp, dirent, filldir, info->extra_fname))
- goto finished;
+ if (info->extra_fname) {
+ if (call_filldir(filp, dirent, filldir, info->extra_fname))
+ goto finished;
- if (!info->curr_node)
+ info->extra_fname = NULL;
+ info->curr_node = rb_next(info->curr_node);
+ if (!info->curr_node) {
+ if (info->next_hash == ~0) {
+ filp->f_pos = EXT4_HTREE_EOF;
+ goto finished;
+ }
+ info->curr_hash = info->next_hash;
+ info->curr_minor_hash = 0;
+ }
+ } else if (!info->curr_node)
info->curr_node = rb_first(&info->root);
while (1) {
extern void ext4_get_inode_flags(struct ext4_inode_info *);
extern void ext4_set_aops(struct inode *inode);
extern int ext4_writepage_trans_blocks(struct inode *);
+extern int ext4_meta_trans_blocks(struct inode *, int nrblocks, int idxblocks);
+extern int ext4_chunk_trans_blocks(struct inode *, int nrblocks);
extern int ext4_block_truncate_page(handle_t *handle,
struct address_space *mapping, loff_t from);
extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct page *page);
/* extents.c */
extern int ext4_ext_tree_init(handle_t *handle, struct inode *);
extern int ext4_ext_writepage_trans_blocks(struct inode *, int);
+extern int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks,
+ int chunk);
extern int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
ext4_lblk_t iblock,
unsigned long max_blocks, struct buffer_head *bh_result,
extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t);
extern int ext4_extent_tree_init(handle_t *, struct inode *);
-extern int ext4_ext_calc_credits_for_insert(struct inode *, struct ext4_ext_path *);
+extern int ext4_ext_calc_credits_for_single_extent(struct inode *inode,
+ int num,
+ struct ext4_ext_path *path);
extern int ext4_ext_try_to_merge(struct inode *inode,
struct ext4_ext_path *path,
struct ext4_extent *);
EXT4_XATTR_TRANS_BLOCKS - 2 + \
2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+/*
+ * Define the number of metadata blocks we need to account to modify data.
+ *
+ * This include super block, inode block, quota blocks and xattr blocks
+ */
+#define EXT4_META_TRANS_BLOCKS(sb) (EXT4_XATTR_TRANS_BLOCKS + \
+ 2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+
/* Delete operations potentially hit one directory's namespace plus an
* entire inode, plus arbitrary amounts of bitmap/indirection data. Be
* generous. We can grow the delete transaction later if necessary. */
}
/*
- * ext4_ext_calc_credits_for_insert:
- * This routine returns max. credits that the extent tree can consume.
- * It should be OK for low-performance paths like ->writepage()
- * To allow many writing processes to fit into a single transaction,
- * the caller should calculate credits under i_data_sem and
- * pass the actual path.
+ * ext4_ext_calc_credits_for_single_extent:
+ * This routine returns max. credits that needed to insert an extent
+ * to the extent tree.
+ * When pass the actual path, the caller should calculate credits
+ * under i_data_sem.
*/
-int ext4_ext_calc_credits_for_insert(struct inode *inode,
+int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
struct ext4_ext_path *path)
{
- int depth, needed;
-
if (path) {
+ int depth = ext_depth(inode);
+ int ret = 0;
+
/* probably there is space in leaf? */
- depth = ext_depth(inode);
if (le16_to_cpu(path[depth].p_hdr->eh_entries)
- < le16_to_cpu(path[depth].p_hdr->eh_max))
- return 1;
- }
+ < le16_to_cpu(path[depth].p_hdr->eh_max)) {
- /*
- * given 32-bit logical block (4294967296 blocks), max. tree
- * can be 4 levels in depth -- 4 * 340^4 == 53453440000.
- * Let's also add one more level for imbalance.
- */
- depth = 5;
-
- /* allocation of new data block(s) */
- needed = 2;
+ /*
+ * There are some space in the leaf tree, no
+ * need to account for leaf block credit
+ *
+ * bitmaps and block group descriptor blocks
+ * and other metadat blocks still need to be
+ * accounted.
+ */
+ /* 1 bitmap, 1 block group descriptor */
+ ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+ }
+ }
- /*
- * tree can be full, so it would need to grow in depth:
- * we need one credit to modify old root, credits for
- * new root will be added in split accounting
- */
- needed += 1;
+ return ext4_chunk_trans_blocks(inode, nrblocks);
+}
- /*
- * Index split can happen, we would need:
- * allocate intermediate indexes (bitmap + group)
- * + change two blocks at each level, but root (already included)
- */
- needed += (depth * 2) + (depth * 2);
+/*
+ * How many index/leaf blocks need to change/allocate to modify nrblocks?
+ *
+ * if nrblocks are fit in a single extent (chunk flag is 1), then
+ * in the worse case, each tree level index/leaf need to be changed
+ * if the tree split due to insert a new extent, then the old tree
+ * index/leaf need to be updated too
+ *
+ * If the nrblocks are discontiguous, they could cause
+ * the whole tree split more than once, but this is really rare.
+ */
+int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+ int index;
+ int depth = ext_depth(inode);
- /* any allocation modifies superblock */
- needed += 1;
+ if (chunk)
+ index = depth * 2;
+ else
+ index = depth * 3;
- return needed;
+ return index;
}
static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
correct_index = 1;
credits += (ext_depth(inode)) + 1;
}
-#ifdef CONFIG_QUOTA
credits += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
err = ext4_ext_journal_restart(handle, credits);
if (err)
/*
* probably first extent we're gonna free will be last in block
*/
- err = ext4_writepage_trans_blocks(inode) + 3;
+ err = ext4_writepage_trans_blocks(inode);
handle = ext4_journal_start(inode, err);
if (IS_ERR(handle))
return;
down_write(&EXT4_I(inode)->i_data_sem);
ext4_ext_invalidate_cache(inode);
- ext4_mb_discard_inode_preallocations(inode);
+ ext4_discard_reservation(inode);
/*
* TODO: optimization is possible here.
ext4_journal_stop(handle);
}
-/*
- * ext4_ext_writepage_trans_blocks:
- * calculate max number of blocks we could modify
- * in order to allocate new block for an inode
- */
-int ext4_ext_writepage_trans_blocks(struct inode *inode, int num)
-{
- int needed;
-
- needed = ext4_ext_calc_credits_for_insert(inode, NULL);
-
- /* caller wants to allocate num blocks, but note it includes sb */
- needed = needed * num - (num - 1);
-
-#ifdef CONFIG_QUOTA
- needed += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
- return needed;
-}
-
static void ext4_falloc_update_inode(struct inode *inode,
int mode, loff_t new_size, int update_ctime)
{
max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
- block;
/*
- * credits to insert 1 extent into extent tree + buffers to be able to
- * modify 1 super block, 1 block bitmap and 1 group descriptor.
+ * credits to insert 1 extent into extent tree
*/
- credits = EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + 3;
+ credits = ext4_chunk_trans_blocks(inode, max_blocks);
mutex_lock(&inode->i_mutex);
retry:
while (ret >= 0 && ret < max_blocks) {
goto found_flexbg;
}
- if (best_flex < 0 ||
+ if (flex_group[best_flex].free_inodes == 0 ||
(flex_group[i].free_blocks >
flex_group[best_flex].free_blocks &&
flex_group[i].free_inodes))
#include "acl.h"
#include "ext4_extents.h"
+#define MPAGE_DA_EXTENT_TAIL 0x01
+
static inline int ext4_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
*/
static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
{
+ if (!blocks)
+ return 0;
+
if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
return ext4_ext_calc_metadata_amount(inode, blocks);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
}
-/* Maximum number of blocks we map for direct IO at once. */
-#define DIO_MAX_BLOCKS 4096
-/*
- * Number of credits we need for writing DIO_MAX_BLOCKS:
- * We need sb + group descriptor + bitmap + inode -> 4
- * For B blocks with A block pointers per block we need:
- * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect).
- * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25.
- */
-#define DIO_CREDITS 25
-
-
/*
* The ext4_get_blocks_wrap() function try to look up the requested blocks,
* and returns if the blocks are already mapped.
return retval;
}
+/* Maximum number of blocks we map for direct IO at once. */
+#define DIO_MAX_BLOCKS 4096
+
static int ext4_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
handle_t *handle = ext4_journal_current_handle();
int ret = 0, started = 0;
unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+ int dio_credits;
if (create && !handle) {
/* Direct IO write... */
if (max_blocks > DIO_MAX_BLOCKS)
max_blocks = DIO_MAX_BLOCKS;
- handle = ext4_journal_start(inode, DIO_CREDITS +
- 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb));
+ dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+ handle = ext4_journal_start(inode, dio_credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
goto out;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int total, mdb, mdb_free, release;
+ if (!to_free)
+ return; /* Nothing to release, exit */
+
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+
+ if (!EXT4_I(inode)->i_reserved_data_blocks) {
+ /*
+ * if there is no reserved blocks, but we try to free some
+ * then the counter is messed up somewhere.
+ * but since this function is called from invalidate
+ * page, it's harmless to return without any action
+ */
+ printk(KERN_INFO "ext4 delalloc try to release %d reserved "
+ "blocks for inode %lu, but there is no reserved "
+ "data blocks\n", to_free, inode->i_ino);
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ return;
+ }
+
/* recalculate the number of metablocks still need to be reserved */
total = EXT4_I(inode)->i_reserved_data_blocks - to_free;
mdb = ext4_calc_metadata_amount(inode, total);
unsigned long first_page, next_page; /* extent of pages */
get_block_t *get_block;
struct writeback_control *wbc;
+ int io_done;
+ long pages_written;
};
/*
* mpage_da_submit_io - walks through extent of pages and try to write
- * them with __mpage_writepage()
+ * them with writepage() call back
*
* @mpd->inode: inode
* @mpd->first_page: first page of the extent
static int mpage_da_submit_io(struct mpage_da_data *mpd)
{
struct address_space *mapping = mpd->inode->i_mapping;
- struct mpage_data mpd_pp = {
- .bio = NULL,
- .last_block_in_bio = 0,
- .get_block = mpd->get_block,
- .use_writepage = 1,
- };
int ret = 0, err, nr_pages, i;
unsigned long index, end;
struct pagevec pvec;
BUG_ON(mpd->next_page <= mpd->first_page);
-
pagevec_init(&pvec, 0);
index = mpd->first_page;
end = mpd->next_page - 1;
break;
index++;
- err = __mpage_writepage(page, mpd->wbc, &mpd_pp);
-
+ err = mapping->a_ops->writepage(page, mpd->wbc);
+ if (!err)
+ mpd->pages_written++;
/*
* In error case, we have to continue because
* remaining pages are still locked
}
pagevec_release(&pvec);
}
- if (mpd_pp.bio)
- mpage_bio_submit(WRITE, mpd_pp.bio);
-
return ret;
}
int blocks = exbh->b_size >> inode->i_blkbits;
sector_t pblock = exbh->b_blocknr, cur_logical;
struct buffer_head *head, *bh;
- unsigned long index, end;
+ pgoff_t index, end;
struct pagevec pvec;
int nr_pages, i;
if (buffer_delay(bh)) {
bh->b_blocknr = pblock;
clear_buffer_delay(bh);
+ bh->b_bdev = inode->i_sb->s_bdev;
+ } else if (buffer_unwritten(bh)) {
+ bh->b_blocknr = pblock;
+ clear_buffer_unwritten(bh);
+ set_buffer_mapped(bh);
+ set_buffer_new(bh);
+ bh->b_bdev = inode->i_sb->s_bdev;
} else if (buffer_mapped(bh))
BUG_ON(bh->b_blocknr != pblock);
*
* The function skips space we know is already mapped to disk blocks.
*
- * The function ignores errors ->get_block() returns, thus real
- * error handling is postponed to __mpage_writepage()
*/
static void mpage_da_map_blocks(struct mpage_da_data *mpd)
{
+ int err = 0;
struct buffer_head *lbh = &mpd->lbh;
- int err = 0, remain = lbh->b_size;
sector_t next = lbh->b_blocknr;
struct buffer_head new;
if (buffer_mapped(lbh) && !buffer_delay(lbh))
return;
- while (remain) {
- new.b_state = lbh->b_state;
- new.b_blocknr = 0;
- new.b_size = remain;
- err = mpd->get_block(mpd->inode, next, &new, 1);
- if (err) {
- /*
- * Rather than implement own error handling
- * here, we just leave remaining blocks
- * unallocated and try again with ->writepage()
- */
- break;
- }
- BUG_ON(new.b_size == 0);
+ new.b_state = lbh->b_state;
+ new.b_blocknr = 0;
+ new.b_size = lbh->b_size;
- if (buffer_new(&new))
- __unmap_underlying_blocks(mpd->inode, &new);
+ /*
+ * If we didn't accumulate anything
+ * to write simply return
+ */
+ if (!new.b_size)
+ return;
+ err = mpd->get_block(mpd->inode, next, &new, 1);
+ if (err)
+ return;
+ BUG_ON(new.b_size == 0);
- /*
- * If blocks are delayed marked, we need to
- * put actual blocknr and drop delayed bit
- */
- if (buffer_delay(lbh))
- mpage_put_bnr_to_bhs(mpd, next, &new);
+ if (buffer_new(&new))
+ __unmap_underlying_blocks(mpd->inode, &new);
- /* go for the remaining blocks */
- next += new.b_size >> mpd->inode->i_blkbits;
- remain -= new.b_size;
- }
+ /*
+ * If blocks are delayed marked, we need to
+ * put actual blocknr and drop delayed bit
+ */
+ if (buffer_delay(lbh) || buffer_unwritten(lbh))
+ mpage_put_bnr_to_bhs(mpd, next, &new);
+
+ return;
}
-#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | (1 << BH_Delay))
+#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \
+ (1 << BH_Delay) | (1 << BH_Unwritten))
/*
* mpage_add_bh_to_extent - try to add one more block to extent of blocks
static void mpage_add_bh_to_extent(struct mpage_da_data *mpd,
sector_t logical, struct buffer_head *bh)
{
- struct buffer_head *lbh = &mpd->lbh;
sector_t next;
+ size_t b_size = bh->b_size;
+ struct buffer_head *lbh = &mpd->lbh;
+ int nrblocks = lbh->b_size >> mpd->inode->i_blkbits;
- next = lbh->b_blocknr + (lbh->b_size >> mpd->inode->i_blkbits);
-
+ /* check if thereserved journal credits might overflow */
+ if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) {
+ if (nrblocks >= EXT4_MAX_TRANS_DATA) {
+ /*
+ * With non-extent format we are limited by the journal
+ * credit available. Total credit needed to insert
+ * nrblocks contiguous blocks is dependent on the
+ * nrblocks. So limit nrblocks.
+ */
+ goto flush_it;
+ } else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) >
+ EXT4_MAX_TRANS_DATA) {
+ /*
+ * Adding the new buffer_head would make it cross the
+ * allowed limit for which we have journal credit
+ * reserved. So limit the new bh->b_size
+ */
+ b_size = (EXT4_MAX_TRANS_DATA - nrblocks) <<
+ mpd->inode->i_blkbits;
+ /* we will do mpage_da_submit_io in the next loop */
+ }
+ }
/*
* First block in the extent
*/
if (lbh->b_size == 0) {
lbh->b_blocknr = logical;
- lbh->b_size = bh->b_size;
+ lbh->b_size = b_size;
lbh->b_state = bh->b_state & BH_FLAGS;
return;
}
+ next = lbh->b_blocknr + nrblocks;
/*
* Can we merge the block to our big extent?
*/
if (logical == next && (bh->b_state & BH_FLAGS) == lbh->b_state) {
- lbh->b_size += bh->b_size;
+ lbh->b_size += b_size;
return;
}
+flush_it:
/*
* We couldn't merge the block to our extent, so we
* need to flush current extent and start new one
*/
mpage_da_map_blocks(mpd);
-
- /*
- * Now start a new extent
- */
- lbh->b_size = bh->b_size;
- lbh->b_state = bh->b_state & BH_FLAGS;
- lbh->b_blocknr = logical;
+ mpage_da_submit_io(mpd);
+ mpd->io_done = 1;
+ return;
}
/*
struct buffer_head *bh, *head, fake;
sector_t logical;
+ if (mpd->io_done) {
+ /*
+ * Rest of the page in the page_vec
+ * redirty then and skip then. We will
+ * try to to write them again after
+ * starting a new transaction
+ */
+ redirty_page_for_writepage(wbc, page);
+ unlock_page(page);
+ return MPAGE_DA_EXTENT_TAIL;
+ }
/*
* Can we merge this page to current extent?
*/
if (mpd->next_page != page->index) {
/*
* Nope, we can't. So, we map non-allocated blocks
- * and start IO on them using __mpage_writepage()
+ * and start IO on them using writepage()
*/
if (mpd->next_page != mpd->first_page) {
mpage_da_map_blocks(mpd);
mpage_da_submit_io(mpd);
+ /*
+ * skip rest of the page in the page_vec
+ */
+ mpd->io_done = 1;
+ redirty_page_for_writepage(wbc, page);
+ unlock_page(page);
+ return MPAGE_DA_EXTENT_TAIL;
}
/*
set_buffer_dirty(bh);
set_buffer_uptodate(bh);
mpage_add_bh_to_extent(mpd, logical, bh);
+ if (mpd->io_done)
+ return MPAGE_DA_EXTENT_TAIL;
} else {
/*
* Page with regular buffer heads, just add all dirty ones
bh = head;
do {
BUG_ON(buffer_locked(bh));
- if (buffer_dirty(bh))
+ if (buffer_dirty(bh) &&
+ (!buffer_mapped(bh) || buffer_delay(bh))) {
mpage_add_bh_to_extent(mpd, logical, bh);
+ if (mpd->io_done)
+ return MPAGE_DA_EXTENT_TAIL;
+ }
logical++;
} while ((bh = bh->b_this_page) != head);
}
*
* This is a library function, which implements the writepages()
* address_space_operation.
- *
- * In order to avoid duplication of logic that deals with partial pages,
- * multiple bio per page, etc, we find non-allocated blocks, allocate
- * them with minimal calls to ->get_block() and re-use __mpage_writepage()
- *
- * It's important that we call __mpage_writepage() only once for each
- * involved page, otherwise we'd have to implement more complicated logic
- * to deal with pages w/o PG_lock or w/ PG_writeback and so on.
- *
- * See comments to mpage_writepages()
*/
static int mpage_da_writepages(struct address_space *mapping,
struct writeback_control *wbc,
get_block_t get_block)
{
struct mpage_da_data mpd;
+ long to_write;
int ret;
if (!get_block)
mpd.first_page = 0;
mpd.next_page = 0;
mpd.get_block = get_block;
+ mpd.io_done = 0;
+ mpd.pages_written = 0;
+
+ to_write = wbc->nr_to_write;
ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, &mpd);
/*
* Handle last extent of pages
*/
- if (mpd.next_page != mpd.first_page) {
+ if (!mpd.io_done && mpd.next_page != mpd.first_page) {
mpage_da_map_blocks(&mpd);
mpage_da_submit_io(&mpd);
}
+ wbc->nr_to_write = to_write - mpd.pages_written;
return ret;
}
}
/*
- * For now just follow the DIO way to estimate the max credits
- * needed to write out EXT4_MAX_WRITEBACK_PAGES.
- * todo: need to calculate the max credits need for
- * extent based files, currently the DIO credits is based on
- * indirect-blocks mapping way.
- *
- * Probably should have a generic way to calculate credits
- * for DIO, writepages, and truncate
+ * This is called via ext4_da_writepages() to
+ * calulate the total number of credits to reserve to fit
+ * a single extent allocation into a single transaction,
+ * ext4_da_writpeages() will loop calling this before
+ * the block allocation.
*/
-#define EXT4_MAX_WRITEBACK_PAGES DIO_MAX_BLOCKS
-#define EXT4_MAX_WRITEBACK_CREDITS DIO_CREDITS
+
+static int ext4_da_writepages_trans_blocks(struct inode *inode)
+{
+ int max_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+
+ /*
+ * With non-extent format the journal credit needed to
+ * insert nrblocks contiguous block is dependent on
+ * number of contiguous block. So we will limit
+ * number of contiguous block to a sane value
+ */
+ if (!(inode->i_flags & EXT4_EXTENTS_FL) &&
+ (max_blocks > EXT4_MAX_TRANS_DATA))
+ max_blocks = EXT4_MAX_TRANS_DATA;
+
+ return ext4_chunk_trans_blocks(inode, max_blocks);
+}
static int ext4_da_writepages(struct address_space *mapping,
- struct writeback_control *wbc)
+ struct writeback_control *wbc)
{
- struct inode *inode = mapping->host;
handle_t *handle = NULL;
- int needed_blocks;
- int ret = 0;
- long to_write;
loff_t range_start = 0;
+ struct inode *inode = mapping->host;
+ int needed_blocks, ret = 0, nr_to_writebump = 0;
+ long to_write, pages_skipped = 0;
+ struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
/*
* No pages to write? This is mainly a kludge to avoid starting
* a transaction for special inodes like journal inode on last iput()
* because that could violate lock ordering on umount
*/
- if (!mapping->nrpages)
+ if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
return 0;
-
/*
- * Estimate the worse case needed credits to write out
- * EXT4_MAX_BUF_BLOCKS pages
+ * Make sure nr_to_write is >= sbi->s_mb_stream_request
+ * This make sure small files blocks are allocated in
+ * single attempt. This ensure that small files
+ * get less fragmented.
*/
- needed_blocks = EXT4_MAX_WRITEBACK_CREDITS;
+ if (wbc->nr_to_write < sbi->s_mb_stream_request) {
+ nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
+ wbc->nr_to_write = sbi->s_mb_stream_request;
+ }
- to_write = wbc->nr_to_write;
- if (!wbc->range_cyclic) {
+ if (!wbc->range_cyclic)
/*
* If range_cyclic is not set force range_cont
* and save the old writeback_index
*/
wbc->range_cont = 1;
- range_start = wbc->range_start;
- }
- while (!ret && to_write) {
+ range_start = wbc->range_start;
+ pages_skipped = wbc->pages_skipped;
+
+restart_loop:
+ to_write = wbc->nr_to_write;
+ while (!ret && to_write > 0) {
+
+ /*
+ * we insert one extent at a time. So we need
+ * credit needed for single extent allocation.
+ * journalled mode is currently not supported
+ * by delalloc
+ */
+ BUG_ON(ext4_should_journal_data(inode));
+ needed_blocks = ext4_da_writepages_trans_blocks(inode);
+
/* start a new transaction*/
handle = ext4_journal_start(inode, needed_blocks);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
+ printk(KERN_EMERG "%s: jbd2_start: "
+ "%ld pages, ino %lu; err %d\n", __func__,
+ wbc->nr_to_write, inode->i_ino, ret);
+ dump_stack();
goto out_writepages;
}
if (ext4_should_order_data(inode)) {
/*
* With ordered mode we need to add
- * the inode to the journal handle
+ * the inode to the journal handl
* when we do block allocation.
*/
ret = ext4_jbd2_file_inode(handle, inode);
ext4_journal_stop(handle);
goto out_writepages;
}
-
}
- /*
- * set the max dirty pages could be write at a time
- * to fit into the reserved transaction credits
- */
- if (wbc->nr_to_write > EXT4_MAX_WRITEBACK_PAGES)
- wbc->nr_to_write = EXT4_MAX_WRITEBACK_PAGES;
to_write -= wbc->nr_to_write;
ret = mpage_da_writepages(mapping, wbc,
- ext4_da_get_block_write);
+ ext4_da_get_block_write);
ext4_journal_stop(handle);
- if (wbc->nr_to_write) {
+ if (ret == MPAGE_DA_EXTENT_TAIL) {
+ /*
+ * got one extent now try with
+ * rest of the pages
+ */
+ to_write += wbc->nr_to_write;
+ ret = 0;
+ } else if (wbc->nr_to_write) {
/*
* There is no more writeout needed
* or we requested for a noblocking writeout
wbc->nr_to_write = to_write;
}
-out_writepages:
- wbc->nr_to_write = to_write;
- if (range_start)
+ if (wbc->range_cont && (pages_skipped != wbc->pages_skipped)) {
+ /* We skipped pages in this loop */
wbc->range_start = range_start;
+ wbc->nr_to_write = to_write +
+ wbc->pages_skipped - pages_skipped;
+ wbc->pages_skipped = pages_skipped;
+ goto restart_loop;
+ }
+
+out_writepages:
+ wbc->nr_to_write = to_write - nr_to_writebump;
+ wbc->range_start = range_start;
return ret;
}
* modify the block allocation tree.
*/
down_write(&ei->i_data_sem);
+
+ ext4_discard_reservation(inode);
+
/*
* The orphan list entry will now protect us from any crash which
* occurs before the truncate completes, so it is now safe to propagate
;
}
- ext4_discard_reservation(inode);
-
up_write(&ei->i_data_sem);
inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
ext4_mark_inode_dirty(handle, inode);
return 0;
}
+static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks,
+ int chunk)
+{
+ int indirects;
+
+ /* if nrblocks are contiguous */
+ if (chunk) {
+ /*
+ * With N contiguous data blocks, it need at most
+ * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks
+ * 2 dindirect blocks
+ * 1 tindirect block
+ */
+ indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb);
+ return indirects + 3;
+ }
+ /*
+ * if nrblocks are not contiguous, worse case, each block touch
+ * a indirect block, and each indirect block touch a double indirect
+ * block, plus a triple indirect block
+ */
+ indirects = nrblocks * 2 + 1;
+ return indirects;
+}
+
+static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+ if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ return ext4_indirect_trans_blocks(inode, nrblocks, 0);
+ return ext4_ext_index_trans_blocks(inode, nrblocks, 0);
+}
/*
- * How many blocks doth make a writepage()?
- *
- * With N blocks per page, it may be:
- * N data blocks
- * 2 indirect block
- * 2 dindirect
- * 1 tindirect
- * N+5 bitmap blocks (from the above)
- * N+5 group descriptor summary blocks
- * 1 inode block
- * 1 superblock.
- * 2 * EXT4_SINGLEDATA_TRANS_BLOCKS for the quote files
+ * Account for index blocks, block groups bitmaps and block group
+ * descriptor blocks if modify datablocks and index blocks
+ * worse case, the indexs blocks spread over different block groups
*
- * 3 * (N + 5) + 2 + 2 * EXT4_SINGLEDATA_TRANS_BLOCKS
+ * If datablocks are discontiguous, they are possible to spread over
+ * different block groups too. If they are contiugous, with flexbg,
+ * they could still across block group boundary.
*
- * With ordered or writeback data it's the same, less the N data blocks.
+ * Also account for superblock, inode, quota and xattr blocks
+ */
+int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+ int groups, gdpblocks;
+ int idxblocks;
+ int ret = 0;
+
+ /*
+ * How many index blocks need to touch to modify nrblocks?
+ * The "Chunk" flag indicating whether the nrblocks is
+ * physically contiguous on disk
+ *
+ * For Direct IO and fallocate, they calls get_block to allocate
+ * one single extent at a time, so they could set the "Chunk" flag
+ */
+ idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk);
+
+ ret = idxblocks;
+
+ /*
+ * Now let's see how many group bitmaps and group descriptors need
+ * to account
+ */
+ groups = idxblocks;
+ if (chunk)
+ groups += 1;
+ else
+ groups += nrblocks;
+
+ gdpblocks = groups;
+ if (groups > EXT4_SB(inode->i_sb)->s_groups_count)
+ groups = EXT4_SB(inode->i_sb)->s_groups_count;
+ if (groups > EXT4_SB(inode->i_sb)->s_gdb_count)
+ gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count;
+
+ /* bitmaps and block group descriptor blocks */
+ ret += groups + gdpblocks;
+
+ /* Blocks for super block, inode, quota and xattr blocks */
+ ret += EXT4_META_TRANS_BLOCKS(inode->i_sb);
+
+ return ret;
+}
+
+/*
+ * Calulate the total number of credits to reserve to fit
+ * the modification of a single pages into a single transaction,
+ * which may include multiple chunks of block allocations.
*
- * If the inode's direct blocks can hold an integral number of pages then a
- * page cannot straddle two indirect blocks, and we can only touch one indirect
- * and dindirect block, and the "5" above becomes "3".
+ * This could be called via ext4_write_begin()
*
- * This still overestimates under most circumstances. If we were to pass the
- * start and end offsets in here as well we could do block_to_path() on each
- * block and work out the exact number of indirects which are touched. Pah.
+ * We need to consider the worse case, when
+ * one new block per extent.
*/
-
int ext4_writepage_trans_blocks(struct inode *inode)
{
int bpp = ext4_journal_blocks_per_page(inode);
- int indirects = (EXT4_NDIR_BLOCKS % bpp) ? 5 : 3;
int ret;
- if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
- return ext4_ext_writepage_trans_blocks(inode, bpp);
+ ret = ext4_meta_trans_blocks(inode, bpp, 0);
+ /* Account for data blocks for journalled mode */
if (ext4_should_journal_data(inode))
- ret = 3 * (bpp + indirects) + 2;
- else
- ret = 2 * (bpp + indirects) + 2;
-
-#ifdef CONFIG_QUOTA
- /* We know that structure was already allocated during DQUOT_INIT so
- * we will be updating only the data blocks + inodes */
- ret += 2*EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
+ ret += bpp;
return ret;
}
+/*
+ * Calculate the journal credits for a chunk of data modification.
+ *
+ * This is called from DIO, fallocate or whoever calling
+ * ext4_get_blocks_wrap() to map/allocate a chunk of contigous disk blocks.
+ *
+ * journal buffers for data blocks are not included here, as DIO
+ * and fallocate do no need to journal data buffers.
+ */
+int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks)
+{
+ return ext4_meta_trans_blocks(inode, nrblocks, 1);
+}
+
/*
* The caller must have previously called ext4_reserve_inode_write().
* Give this, we know that the caller already has write access to iloc->bh.
mb_debug("use %u/%u from group pa %p\n", pa->pa_lstart-len, len, pa);
}
+/*
+ * Return the prealloc space that have minimal distance
+ * from the goal block. @cpa is the prealloc
+ * space that is having currently known minimal distance
+ * from the goal block.
+ */
+static struct ext4_prealloc_space *
+ext4_mb_check_group_pa(ext4_fsblk_t goal_block,
+ struct ext4_prealloc_space *pa,
+ struct ext4_prealloc_space *cpa)
+{
+ ext4_fsblk_t cur_distance, new_distance;
+
+ if (cpa == NULL) {
+ atomic_inc(&pa->pa_count);
+ return pa;
+ }
+ cur_distance = abs(goal_block - cpa->pa_pstart);
+ new_distance = abs(goal_block - pa->pa_pstart);
+
+ if (cur_distance < new_distance)
+ return cpa;
+
+ /* drop the previous reference */
+ atomic_dec(&cpa->pa_count);
+ atomic_inc(&pa->pa_count);
+ return pa;
+}
+
/*
* search goal blocks in preallocated space
*/
int order, i;
struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
struct ext4_locality_group *lg;
- struct ext4_prealloc_space *pa;
+ struct ext4_prealloc_space *pa, *cpa = NULL;
+ ext4_fsblk_t goal_block;
/* only data can be preallocated */
if (!(ac->ac_flags & EXT4_MB_HINT_DATA))
/* The max size of hash table is PREALLOC_TB_SIZE */
order = PREALLOC_TB_SIZE - 1;
+ goal_block = ac->ac_g_ex.fe_group * EXT4_BLOCKS_PER_GROUP(ac->ac_sb) +
+ ac->ac_g_ex.fe_start +
+ le32_to_cpu(EXT4_SB(ac->ac_sb)->s_es->s_first_data_block);
+ /*
+ * search for the prealloc space that is having
+ * minimal distance from the goal block.
+ */
for (i = order; i < PREALLOC_TB_SIZE; i++) {
rcu_read_lock();
list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[i],
spin_lock(&pa->pa_lock);
if (pa->pa_deleted == 0 &&
pa->pa_free >= ac->ac_o_ex.fe_len) {
- atomic_inc(&pa->pa_count);
- ext4_mb_use_group_pa(ac, pa);
- spin_unlock(&pa->pa_lock);
- ac->ac_criteria = 20;
- rcu_read_unlock();
- return 1;
+
+ cpa = ext4_mb_check_group_pa(goal_block,
+ pa, cpa);
}
spin_unlock(&pa->pa_lock);
}
rcu_read_unlock();
}
+ if (cpa) {
+ ext4_mb_use_group_pa(ac, cpa);
+ ac->ac_criteria = 20;
+ return 1;
+ }
return 0;
}
* credit. But below we try to not accumalate too much
* of them by restarting the journal.
*/
- needed = ext4_ext_calc_credits_for_insert(inode, path);
+ needed = ext4_ext_calc_credits_for_single_extent(inode,
+ lb->last_block - lb->first_block + 1, path);
/*
* Make sure the credit we accumalated is not really high
if (reserved_gdb || gdb_off == 0) {
if (!EXT4_HAS_COMPAT_FEATURE(sb,
- EXT4_FEATURE_COMPAT_RESIZE_INODE)){
+ EXT4_FEATURE_COMPAT_RESIZE_INODE)
+ || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
ext4_warning(sb, __func__,
"No reserved GDT blocks, can't resize");
return -EPERM;
#endif
ei->i_block_alloc_info = NULL;
ei->vfs_inode.i_version = 1;
+ ei->vfs_inode.i_data.writeback_index = 0;
memset(&ei->i_cached_extent, 0, sizeof(struct ext4_ext_cache));
INIT_LIST_HEAD(&ei->i_prealloc_list);
spin_lock_init(&ei->i_prealloc_lock);
#ifndef _JFFS2_FS_I
#define _JFFS2_FS_I
-#include <linux/version.h>
#include <linux/rbtree.h>
#include <linux/posix_acl.h>
#include <linux/mutex.h>
#ifndef __XFS_DMAPI_H__
#define __XFS_DMAPI_H__
-#include <linux/version.h>
/* Values used to define the on-disk version of dm_attrname_t. All
* on-disk attribute names start with the 8-byte string "SGI_DMI_".
*
#define get_uv_system_type() UV_NONE
#define is_uv_system() 0
#define uv_wakeup_secondary(a, b) 1
+#define uv_system_init() do {} while (0)
#endif
extern struct genapic apic_x2apic_uv_x;
DECLARE_PER_CPU(int, x2apic_extra_bits);
extern void uv_cpu_init(void);
+extern void uv_system_init(void);
extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
extern void setup_apic_routing(void);
#define CALL_FUNCTION_SINGLE_VECTOR 0xfb
#define THERMAL_APIC_VECTOR 0xfa
#define THRESHOLD_APIC_VECTOR 0xf9
+#define UV_BAU_MESSAGE 0xf8
#define INVALIDATE_TLB_VECTOR_END 0xf7
#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */
#define UV_ACTIVATION_DESCRIPTOR_SIZE 32
#define UV_DISTRIBUTION_SIZE 256
#define UV_SW_ACK_NPENDING 8
-#define UV_BAU_MESSAGE 200
-/*
- * Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
- * To be dynamically allocated in the future
- */
#define UV_NET_ENDPOINT_INTD 0x38
#define UV_DESC_BASE_PNODE_SHIFT 49
#define UV_PAYLOADQ_PNODE_SHIFT 49
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <xen/interface/xen.h>
#include <xen/interface/version.h>
struct kobject kobj;
char bus_id[BUS_ID_SIZE]; /* position on parent bus */
+ const char *init_name; /* initial name of the device */
struct device_type *type;
unsigned uevent_suppress:1;
/* Get the wakeup routines, which depend on struct device */
#include <linux/pm_wakeup.h>
-static inline const char *dev_name(struct device *dev)
+static inline const char *dev_name(const struct device *dev)
{
/* will be changed into kobject_name(&dev->kobj) in the near future */
return dev->bus_id;
extern void sysdev_shutdown(void);
/* debugging and troubleshooting/diagnostic helpers. */
-extern const char *dev_driver_string(struct device *dev);
+extern const char *dev_driver_string(const struct device *dev);
#define dev_printk(level, dev, format, arg...) \
printk(level "%s %s: " format , dev_driver_string(dev) , \
dev_name(dev) , ## arg)
#ifndef FS_UART_PD_H
#define FS_UART_PD_H
-#include <linux/version.h>
#include <asm/types.h>
enum fs_uart_id {
ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
+ ATA_LFLAG_NO_HRST = (1 << 1), /* avoid hardreset */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */
ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */
unsigned int flags; /* ATA_LFLAG_xxx */
+ u32 saved_scontrol; /* SControl on probe */
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit;
unsigned int sata_spd; /* current SATA PHY speed */
return from_jiffies + msecs_to_jiffies(timeout_msecs);
}
+/* Don't open code these in drivers as there are traps. Firstly the range may
+ change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+ > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+ return 1;
+ return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+ return 1;
+ return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+ return (adev->dma_mode == 0xFF ? 0 : 1);
+}
/**************************************************************************
* PMP - drivers/ata/libata-pmp.c
extern int tick_init_highres(void);
extern int tick_program_event(ktime_t expires, int force);
extern void tick_setup_sched_timer(void);
+# endif
+
+# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
extern void tick_cancel_sched_timer(int cpu);
# else
static inline void tick_cancel_sched_timer(int cpu) { }
-# endif /* HIGHRES */
+# endif
# ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
extern struct tick_device *tick_get_broadcast_device(void);
* @sysfs_files_created: sysfs attributes exist
* @needs_remote_wakeup: flag set when the driver requires remote-wakeup
* capability during autosuspend.
+ * @needs_altsetting0: flag set when a set-interface request for altsetting 0
+ * has been deferred.
* @needs_binding: flag set when the driver should be re-probed or unbound
* following a reset or suspend operation it doesn't support.
* @dev: driver model's view of this device
unsigned is_active:1; /* the interface is not suspended */
unsigned sysfs_files_created:1; /* the sysfs attributes exist */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
+ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
unsigned needs_binding:1; /* needs delayed unbind/rebind */
struct device dev; /* interface specific device info */
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/nsproxy.h>
#include <linux/init_task.h>
#include <linux/mnt_namespace.h>
#include <linux/module.h>
#include <linux/file.h>
#include <linux/utsname.h>
-#include <linux/version.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/genhd.h>
* sections are delimited by rcu_read_lock() and rcu_read_unlock(),
* and may be nested.
*/
+void synchronize_rcu(void); /* Makes kernel-doc tools happy */
synchronize_rcu_xxx(synchronize_rcu, call_rcu)
EXPORT_SYMBOL_GPL(synchronize_rcu);
SCHED_FEAT(HRTICK, 1)
SCHED_FEAT(DOUBLE_TICK, 0)
SCHED_FEAT(ASYM_GRAN, 1)
-SCHED_FEAT(LB_BIAS, 0)
+SCHED_FEAT(LB_BIAS, 1)
SCHED_FEAT(LB_WAKEUP_UPDATE, 1)
SCHED_FEAT(ASYM_EFF_LOAD, 1)
ts->nohz_mode = NOHZ_MODE_HIGHRES;
#endif
}
+#endif /* HIGH_RES_TIMERS */
+#if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
void tick_cancel_sched_timer(int cpu)
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
+# ifdef CONFIG_HIGH_RES_TIMERS
if (ts->sched_timer.base)
hrtimer_cancel(&ts->sched_timer);
+# endif
ts->nohz_mode = NOHZ_MODE_INACTIVE;
}
-#endif /* HIGH_RES_TIMERS */
+#endif
/**
* Async notification about clocksource changes
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/nsproxy.h>
#include <linux/slab.h>
#include <linux/user_namespace.h>
#include <linux/module.h>
#include <linux/uts.h>
#include <linux/utsname.h>
-#include <linux/version.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/uts.h>
#include <linux/utsname.h>
-#include <linux/version.h>
#include <linux/sysctl.h>
static void *get_uts(ctl_table *table, int write)
return -ENOMEM;
/* ewww... some of these buggers have '/' in the name ... */
- s = strchr(kobj->name, '/');
- if (s)
+ while ((s = strchr(kobj->name, '/')))
s[0] = '!';
kfree(old_name);
struct module *mod)
{
const unsigned long id_size = sizeof(struct pnp_device_id);
- const struct pnp_device_id *id = symval;
+ const unsigned int count = (size / id_size)-1;
+ const struct pnp_device_id *devs = symval;
+ unsigned int i;
device_id_check(mod->name, "pnp", size, id_size, symval);
- buf_printf(&mod->dev_table_buf,
- "MODULE_ALIAS(\"pnp:d%s*\");\n", id->id);
- buf_printf(&mod->dev_table_buf,
- "MODULE_ALIAS(\"acpi*:%s:*\");\n", id->id);
+ for (i = 0; i < count; i++) {
+ const char *id = (char *)devs[i].id;
+
+ buf_printf(&mod->dev_table_buf,
+ "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+ buf_printf(&mod->dev_table_buf,
+ "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+ }
}
/* looks like: "pnp:dD" for every device of the card */
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
/* Defines for Nvidia HDA support */
#define NVIDIA_HDA_TRANSREG_ADDR 0x4e
#define NVIDIA_HDA_ENABLE_COHBITS 0x0f
+#define NVIDIA_HDA_ISTRM_COH 0x4d
+#define NVIDIA_HDA_OSTRM_COH 0x4c
+#define NVIDIA_HDA_ENABLE_COHBIT 0x01
/* Defines for Intel SCH HDA snoop control */
#define INTEL_SCH_HDA_DEVC 0x78
update_pci_byte(chip->pci,
NVIDIA_HDA_TRANSREG_ADDR,
0x0f, NVIDIA_HDA_ENABLE_COHBITS);
+ update_pci_byte(chip->pci,
+ NVIDIA_HDA_ISTRM_COH,
+ 0x01, NVIDIA_HDA_ENABLE_COHBIT);
+ update_pci_byte(chip->pci,
+ NVIDIA_HDA_OSTRM_COH,
+ 0x01, NVIDIA_HDA_ENABLE_COHBIT);
break;
case AZX_DRIVER_SCH:
pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
tmp | 0x2010);
break;
case 0x10ec0888:
- alc888_coef_init(codec);
+ /*alc888_coef_init(codec);*/ /* called in alc_init() */
break;
case 0x10ec0267:
case 0x10ec0268:
unsigned int i;
alc_fix_pll(codec);
+ if (codec->vendor_id == 0x10ec0888)
+ alc888_coef_init(codec);
for (i = 0; i < spec->num_init_verbs; i++)
snd_hda_sequence_write(codec, spec->init_verbs[i]);
codec->patch_ops = alc_patch_ops;
if (board_config == ALC883_AUTO)
spec->init_hook = alc883_auto_init;
- else if (codec->vendor_id == 0x10ec0888)
- spec->init_hook = alc888_coef_init;
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (!spec->loopback.amplist)
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/timer.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <sound/core.h>
projects / cascardo / linux.git / commitdiff