depends on 64BIT
select PHYLIB
select MDIO_THUNDER
+ select THUNDER_NIC_RGX
---help---
This driver supports programming and controlling of MAC
interface from NIC physical function driver.
+config THUNDER_NIC_RGX
+ tristate "Thunder MAC interface driver (RGX)"
+ depends on 64BIT
+ select PHYLIB
+ select MDIO_THUNDER
+ ---help---
+ This driver supports configuring XCV block of RGX interface
+ present on CN81XX chip.
+
config LIQUIDIO
tristate "Cavium LiquidIO support"
depends on 64BIT
# Makefile for Cavium's Thunder ethernet device
#
+obj-$(CONFIG_THUNDER_NIC_RGX) += thunder_xcv.o
obj-$(CONFIG_THUNDER_NIC_BGX) += thunder_bgx.o
obj-$(CONFIG_THUNDER_NIC_PF) += nicpf.o
obj-$(CONFIG_THUNDER_NIC_VF) += nicvf.o
nic_reg_write(nic,
NIC_PF_LMAC_0_7_CREDIT + (lmac * 8),
lmac_credit);
+
+ /* On CN81XX there are only 8 VFs but max possible no of
+ * interfaces are 9.
+ */
+ if (nic->num_vf_en >= pci_sriov_get_totalvfs(nic->pdev)) {
+ nic->num_vf_en = pci_sriov_get_totalvfs(nic->pdev);
+ break;
+ }
}
}
lmac = NIC_GET_LMAC_FROM_VF_LMAC_MAP(nic->vf_lmac_map[vnic]);
chan = (lmac * hw->chans_per_lmac) + (bgx * hw->chans_per_bgx);
- cpi_base = (lmac * NIC_MAX_CPI_PER_LMAC) +
- (bgx * (hw->cpi_cnt / hw->bgx_cnt));
- rssi_base = (lmac * hw->rss_ind_tbl_size) +
- (bgx * (hw->rssi_cnt / hw->bgx_cnt));
+ cpi_base = vnic * NIC_MAX_CPI_PER_LMAC;
+ rssi_base = vnic * hw->rss_ind_tbl_size;
/* Rx channel configuration */
nic_reg_write(nic, NIC_PF_CHAN_0_255_RX_BP_CFG | (chan << 3),
u8 bgx_id;
struct lmac lmac[MAX_LMAC_PER_BGX];
int lmac_count;
+ u8 max_lmac;
void __iomem *reg_base;
struct pci_dev *pdev;
bool is_81xx;
+ bool is_rgx;
};
static struct bgx *bgx_vnic[MAX_BGX_THUNDER];
/* Supported devices */
static const struct pci_device_id bgx_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_BGX) },
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_RGX) },
{ 0, } /* end of table */
};
int i;
unsigned map = 0;
- for (i = 0; i < MAX_BGX_PER_CN88XX; i++) {
+ for (i = 0; i < MAX_BGX_PER_CN81XX; i++) {
if (bgx_vnic[(node * MAX_BGX_PER_CN88XX) + i])
map |= (1 << i);
}
void bgx_lmac_rx_tx_enable(int node, int bgx_idx, int lmacid, bool enable)
{
struct bgx *bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx];
+ struct lmac *lmac;
u64 cfg;
if (!bgx)
return;
+ lmac = &bgx->lmac[lmacid];
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
if (enable)
else
cfg &= ~(CMR_PKT_RX_EN | CMR_PKT_TX_EN);
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
+
+ if (bgx->is_rgx)
+ xcv_setup_link(enable ? lmac->link_up : 0, lmac->last_speed);
}
EXPORT_SYMBOL(bgx_lmac_rx_tx_enable);
port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG);
- /* renable lmac */
+ /* Re-enable lmac */
cmr_cfg |= CMR_EN;
bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg);
+
+ if (bgx->is_rgx && (cmr_cfg & (CMR_PKT_RX_EN | CMR_PKT_TX_EN)))
+ xcv_setup_link(lmac->link_up, lmac->last_speed);
}
static void bgx_lmac_handler(struct net_device *netdev)
return 0;
}
- if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_STATUS,
- PCS_MRX_STATUS_AN_CPT, false)) {
- dev_err(&bgx->pdev->dev, "BGX AN_CPT not completed\n");
- return -1;
+ if (lmac->lmac_type == BGX_MODE_SGMII) {
+ if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_STATUS,
+ PCS_MRX_STATUS_AN_CPT, false)) {
+ dev_err(&bgx->pdev->dev, "BGX AN_CPT not completed\n");
+ return -1;
+ }
}
return 0;
{
if (lmac_type == BGX_MODE_QSGMII)
return PHY_INTERFACE_MODE_QSGMII;
+ if (lmac_type == BGX_MODE_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
return PHY_INTERFACE_MODE_SGMII;
}
lmac->bgx = bgx;
if ((lmac->lmac_type == BGX_MODE_SGMII) ||
- (lmac->lmac_type == BGX_MODE_QSGMII)) {
+ (lmac->lmac_type == BGX_MODE_QSGMII) ||
+ (lmac->lmac_type == BGX_MODE_RGMII)) {
lmac->is_sgmii = 1;
if (bgx_lmac_sgmii_init(bgx, lmac))
return -1;
char str[20];
u8 dlm;
- if (lmacid > MAX_LMAC_PER_BGX)
+ if (lmacid > bgx->max_lmac)
return;
lmac = &bgx->lmac[lmacid];
return;
dev_info(dev, "%s: QSGMII\n", (char *)str);
break;
+ case BGX_MODE_RGMII:
+ dev_info(dev, "%s: RGMII\n", (char *)str);
+ break;
case BGX_MODE_INVALID:
/* Nothing to do */
break;
break;
case BGX_MODE_XAUI:
case BGX_MODE_XLAUI:
+ case BGX_MODE_RGMII:
lmac->lane_to_sds = 0xE4;
break;
case BGX_MODE_RXAUI:
}
}
+static void lmac_set_training(struct bgx *bgx, struct lmac *lmac, int lmacid)
+{
+ if ((lmac->lmac_type != BGX_MODE_10G_KR) &&
+ (lmac->lmac_type != BGX_MODE_40G_KR)) {
+ lmac->use_training = 0;
+ return;
+ }
+
+ lmac->use_training = bgx_reg_read(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL) &
+ SPU_PMD_CRTL_TRAIN_EN;
+}
+
static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
{
struct lmac *lmac;
lmac = &bgx->lmac[idx];
- if (!bgx->is_81xx) {
+ if (!bgx->is_81xx || bgx->is_rgx) {
/* Read LMAC0 type to figure out QLM mode
* This is configured by low level firmware
*/
cmr_cfg = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
lmac->lmac_type = (cmr_cfg >> 8) & 0x07;
- lmac->use_training =
- bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
- SPU_PMD_CRTL_TRAIN_EN;
+ if (bgx->is_rgx)
+ lmac->lmac_type = BGX_MODE_RGMII;
+ lmac_set_training(bgx, lmac, 0);
lmac_set_lane2sds(bgx, lmac);
return;
}
lmac->lmac_type = BGX_MODE_INVALID;
else
lmac->lmac_type = lmac_type;
- lmac->use_training =
- bgx_reg_read(bgx, idx, BGX_SPUX_BR_PMD_CRTL) &
- SPU_PMD_CRTL_TRAIN_EN;
+ lmac_set_training(bgx, lmac, lmac->lmacid);
lmac_set_lane2sds(bgx, lmac);
/* Set LMAC type of other lmac on same DLM i.e LMAC 1/3 */
olmac = &bgx->lmac[idx + 1];
olmac->lmac_type = lmac->lmac_type;
- olmac->use_training =
- bgx_reg_read(bgx, idx + 1, BGX_SPUX_BR_PMD_CRTL) &
- SPU_PMD_CRTL_TRAIN_EN;
+ lmac_set_training(bgx, olmac, olmac->lmacid);
lmac_set_lane2sds(bgx, olmac);
}
}
u8 idx;
/* Init all LMAC's type to invalid */
- for (idx = 0; idx < MAX_LMAC_PER_BGX; idx++) {
+ for (idx = 0; idx < bgx->max_lmac; idx++) {
lmac = &bgx->lmac[idx];
- lmac->lmac_type = BGX_MODE_INVALID;
lmac->lmacid = idx;
+ lmac->lmac_type = BGX_MODE_INVALID;
+ lmac->use_training = false;
}
/* It is assumed that low level firmware sets this value */
bgx->lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7;
- if (bgx->lmac_count > MAX_LMAC_PER_BGX)
- bgx->lmac_count = MAX_LMAC_PER_BGX;
+ if (bgx->lmac_count > bgx->max_lmac)
+ bgx->lmac_count = bgx->max_lmac;
- for (idx = 0; idx < MAX_LMAC_PER_BGX; idx++)
+ for (idx = 0; idx < bgx->max_lmac; idx++)
bgx_set_lmac_config(bgx, idx);
- if (!bgx->is_81xx) {
+ if (!bgx->is_81xx || bgx->is_rgx) {
bgx_print_qlm_mode(bgx, 0);
return;
}
}
lmac++;
- if (lmac == MAX_LMAC_PER_BGX) {
+ if (lmac == bgx->max_lmac) {
of_node_put(node);
break;
}
err = -ENOMEM;
goto err_release_regions;
}
- bgx->bgx_id = (pci_resource_start(pdev, PCI_CFG_REG_BAR_NUM) >> 24) & 1;
- bgx->bgx_id += nic_get_node_id(pdev) * MAX_BGX_PER_CN88XX;
- bgx_vnic[bgx->bgx_id] = bgx;
+ pci_read_config_word(pdev, PCI_DEVICE_ID, &sdevid);
+ if (sdevid != PCI_DEVICE_ID_THUNDER_RGX) {
+ bgx->bgx_id =
+ (pci_resource_start(pdev, PCI_CFG_REG_BAR_NUM) >> 24) & 1;
+ bgx->bgx_id += nic_get_node_id(pdev) * MAX_BGX_PER_CN88XX;
+ bgx->max_lmac = MAX_LMAC_PER_BGX;
+ bgx_vnic[bgx->bgx_id] = bgx;
+ } else {
+ bgx->is_rgx = true;
+ bgx->max_lmac = 1;
+ bgx->bgx_id = MAX_BGX_PER_CN81XX - 1;
+ bgx_vnic[bgx->bgx_id] = bgx;
+ xcv_init_hw();
+ }
+
bgx_get_qlm_mode(bgx);
err = bgx_init_phy(bgx);
/* PCI device ID */
#define PCI_DEVICE_ID_THUNDER_BGX 0xA026
+#define PCI_DEVICE_ID_THUNDER_RGX 0xA054
/* Subsystem device IDs */
#define PCI_SUBSYS_DEVID_88XX_BGX 0xA126
#define MAX_BGX_THUNDER 8 /* Max 4 nodes, 2 per node */
#define MAX_BGX_PER_CN88XX 2
-#define MAX_BGX_PER_CN81XX 2
+#define MAX_BGX_PER_CN81XX 3 /* 2 BGXs + 1 RGX */
#define MAX_BGX_PER_CN83XX 4
#define MAX_LMAC_PER_BGX 4
#define MAX_BGX_CHANS_PER_LMAC 16
void bgx_get_lmac_link_state(int node, int bgx_idx, int lmacid, void *status);
void bgx_lmac_internal_loopback(int node, int bgx_idx,
int lmac_idx, bool enable);
+void xcv_init_hw(void);
+void xcv_setup_link(bool link_up, int link_speed);
+
u64 bgx_get_rx_stats(int node, int bgx_idx, int lmac, int idx);
u64 bgx_get_tx_stats(int node, int bgx_idx, int lmac, int idx);
#define BGX_RX_STATS_COUNT 11
--- /dev/null
+/*
+ * Copyright (C) 2016 Cavium, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+
+#include "nic.h"
+#include "thunder_bgx.h"
+
+#define DRV_NAME "thunder-xcv"
+#define DRV_VERSION "1.0"
+
+/* Register offsets */
+#define XCV_RESET 0x00
+#define PORT_EN BIT_ULL(63)
+#define CLK_RESET BIT_ULL(15)
+#define DLL_RESET BIT_ULL(11)
+#define COMP_EN BIT_ULL(7)
+#define TX_PKT_RESET BIT_ULL(3)
+#define TX_DATA_RESET BIT_ULL(2)
+#define RX_PKT_RESET BIT_ULL(1)
+#define RX_DATA_RESET BIT_ULL(0)
+#define XCV_DLL_CTL 0x10
+#define CLKRX_BYP BIT_ULL(23)
+#define CLKTX_BYP BIT_ULL(15)
+#define XCV_COMP_CTL 0x20
+#define DRV_BYP BIT_ULL(63)
+#define XCV_CTL 0x30
+#define XCV_INT 0x40
+#define XCV_INT_W1S 0x48
+#define XCV_INT_ENA_W1C 0x50
+#define XCV_INT_ENA_W1S 0x58
+#define XCV_INBND_STATUS 0x80
+#define XCV_BATCH_CRD_RET 0x100
+
+struct xcv {
+ void __iomem *reg_base;
+ struct pci_dev *pdev;
+};
+
+static struct xcv *xcv;
+
+/* Supported devices */
+static const struct pci_device_id xcv_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xA056) },
+ { 0, } /* end of table */
+};
+
+MODULE_AUTHOR("Cavium Inc");
+MODULE_DESCRIPTION("Cavium Thunder RGX/XCV Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, xcv_id_table);
+
+void xcv_init_hw(void)
+{
+ u64 cfg;
+
+ /* Take DLL out of reset */
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg &= ~DLL_RESET;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+
+ /* Take clock tree out of reset */
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg &= ~CLK_RESET;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+ /* Wait for DLL to lock */
+ msleep(1);
+
+ /* Configure DLL - enable or bypass
+ * TX no bypass, RX bypass
+ */
+ cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
+ cfg &= ~0xFF03;
+ cfg |= CLKRX_BYP;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
+
+ /* Enable compensation controller and force the
+ * write to be visible to HW by readig back.
+ */
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg |= COMP_EN;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+ readq_relaxed(xcv->reg_base + XCV_RESET);
+ /* Wait for compensation state machine to lock */
+ msleep(10);
+
+ /* enable the XCV block */
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg |= PORT_EN;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg |= CLK_RESET;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+}
+EXPORT_SYMBOL(xcv_init_hw);
+
+void xcv_setup_link(bool link_up, int link_speed)
+{
+ u64 cfg;
+ int speed = 2;
+
+ if (!xcv) {
+ dev_err(&xcv->pdev->dev,
+ "XCV init not done, probe may have failed\n");
+ return;
+ }
+
+ if (link_speed == 100)
+ speed = 1;
+ else if (link_speed == 10)
+ speed = 0;
+
+ if (link_up) {
+ /* set operating speed */
+ cfg = readq_relaxed(xcv->reg_base + XCV_CTL);
+ cfg &= ~0x03;
+ cfg |= speed;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_CTL);
+
+ /* Reset datapaths */
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg |= TX_DATA_RESET | RX_DATA_RESET;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+
+ /* Enable the packet flow */
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg |= TX_PKT_RESET | RX_PKT_RESET;
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+
+ /* Return credits to RGX */
+ writeq_relaxed(0x01, xcv->reg_base + XCV_BATCH_CRD_RET);
+ } else {
+ /* Disable packet flow */
+ cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
+ cfg &= ~(TX_PKT_RESET | RX_PKT_RESET);
+ writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
+ readq_relaxed(xcv->reg_base + XCV_RESET);
+ }
+}
+EXPORT_SYMBOL(xcv_setup_link);
+
+static int xcv_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+
+ xcv = devm_kzalloc(dev, sizeof(struct xcv), GFP_KERNEL);
+ if (!xcv)
+ return -ENOMEM;
+ xcv->pdev = pdev;
+
+ pci_set_drvdata(pdev, xcv);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "Failed to enable PCI device\n");
+ goto err_kfree;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(dev, "PCI request regions failed 0x%x\n", err);
+ goto err_disable_device;
+ }
+
+ /* MAP configuration registers */
+ xcv->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
+ if (!xcv->reg_base) {
+ dev_err(dev, "XCV: Cannot map CSR memory space, aborting\n");
+ err = -ENOMEM;
+ goto err_release_regions;
+ }
+
+ return 0;
+
+err_release_regions:
+ pci_release_regions(pdev);
+err_disable_device:
+ pci_disable_device(pdev);
+err_kfree:
+ pci_set_drvdata(pdev, NULL);
+ devm_kfree(dev, xcv);
+ xcv = NULL;
+ return err;
+}
+
+static void xcv_remove(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ if (xcv) {
+ devm_kfree(dev, xcv);
+ xcv = NULL;
+ }
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver xcv_driver = {
+ .name = DRV_NAME,
+ .id_table = xcv_id_table,
+ .probe = xcv_probe,
+ .remove = xcv_remove,
+};
+
+static int __init xcv_init_module(void)
+{
+ pr_info("%s, ver %s\n", DRV_NAME, DRV_VERSION);
+
+ return pci_register_driver(&xcv_driver);
+}
+
+static void __exit xcv_cleanup_module(void)
+{
+ pci_unregister_driver(&xcv_driver);
+}
+
+module_init(xcv_init_module);
+module_exit(xcv_cleanup_module);
projects / cascardo / linux.git / commitdiff