--- /dev/null
+/*
+ * w83795.c - Linux kernel driver for hardware monitoring
+ * Copyright (C) 2008 Nuvoton Technology Corp.
+ * Wei Song
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation - version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA.
+ *
+ * Supports following chips:
+ *
+ * Chip #vin #fanin #pwm #temp #dts wchipid vendid i2c ISA
+ * w83795g 21 14 8 6 8 0x79 0x5ca3 yes no
+ * w83795adg 18 14 2 6 8 0x79 0x5ca3 yes no
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+
+enum chips { w83795 };
+
+
+static int reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
+
+
+#define W83795_REG_BANKSEL 0x00
+#define W83795_REG_VENDORID 0xfd
+#define W83795_REG_CHIPID 0xfe
+#define W83795_REG_DEVICEID 0xfb
+
+#define W83795_REG_I2C_ADDR 0xfc
+#define W83795_REG_CONFIG 0x01
+#define W83795_REG_CONFIG_CONFIG48 0x04
+
+/* Multi-Function Pin Ctrl Registers */
+#define W83795_REG_VOLT_CTRL1 0x02
+#define W83795_REG_VOLT_CTRL2 0x03
+#define W83795_REG_TEMP_CTRL1 0x04
+#define W83795_REG_TEMP_CTRL2 0x05
+#define W83795_REG_FANIN_CTRL1 0x06
+#define W83795_REG_FANIN_CTRL2 0x07
+#define W83795_REG_VMIGB_CTRL 0x08
+
+#define TEMP_CTRL_DISABLE 0
+#define TEMP_CTRL_TD 1
+#define TEMP_CTRL_VSEN 2
+#define TEMP_CTRL_TR 3
+#define TEMP_CTRL_SHIFT 4
+#define TEMP_CTRL_HASIN_SHIFT 5
+/* temp mode may effect VSEN17-12 (in20-15) */
+static u16 W83795_REG_TEMP_CTRL[][6] = {
+ /* Disable, TD, VSEN, TR, register shift value, has_in shift num */
+ {0x00, 0x01, 0x02, 0x03, 0, 17}, /* TR1 */
+ {0x00, 0x04, 0x08, 0x0C, 2, 18}, /* TR2 */
+ {0x00, 0x10, 0x20, 0x30, 4, 19}, /* TR3 */
+ {0x00, 0x40, 0x80, 0xC0, 6, 20}, /* TR4 */
+ {0x00, 0x00, 0x02, 0x03, 0, 15}, /* TR5 */
+ {0x00, 0x00, 0x08, 0x0C, 2, 16}, /* TR6 */
+};
+
+#define TEMP_READ 0
+#define TEMP_CRIT 1
+#define TEMP_CRIT_HYST 2
+#define TEMP_WARN 3
+#define TEMP_WARN_HYST 4
+/* only crit and crit_hyst affect real-time alarm status
+ * current crit crit_hyst warn warn_hyst */
+static u16 W83795_REG_TEMP[][5] = {
+ {0x21, 0x96, 0x97, 0x98, 0x99}, /* TD1/TR1 */
+ {0x22, 0x9a, 0x9b, 0x9c, 0x9d}, /* TD2/TR2 */
+ {0x23, 0x9e, 0x9f, 0xa0, 0xa1}, /* TD3/TR3 */
+ {0x24, 0xa2, 0xa3, 0xa4, 0xa5}, /* TD4/TR4 */
+ {0x1f, 0xa6, 0xa7, 0xa8, 0xa9}, /* TR5 */
+ {0x20, 0xaa, 0xab, 0xac, 0xad}, /* TR6 */
+};
+
+#define IN_READ 0
+#define IN_MAX 1
+#define IN_LOW 2
+static const u16 W83795_REG_IN[][3] = {
+ /* Current, HL, LL */
+ {0x10, 0x70, 0x71}, /* VSEN1 */
+ {0x11, 0x72, 0x73}, /* VSEN2 */
+ {0x12, 0x74, 0x75}, /* VSEN3 */
+ {0x13, 0x76, 0x77}, /* VSEN4 */
+ {0x14, 0x78, 0x79}, /* VSEN5 */
+ {0x15, 0x7a, 0x7b}, /* VSEN6 */
+ {0x16, 0x7c, 0x7d}, /* VSEN7 */
+ {0x17, 0x7e, 0x7f}, /* VSEN8 */
+ {0x18, 0x80, 0x81}, /* VSEN9 */
+ {0x19, 0x82, 0x83}, /* VSEN10 */
+ {0x1A, 0x84, 0x85}, /* VSEN11 */
+ {0x1B, 0x86, 0x87}, /* VTT */
+ {0x1C, 0x88, 0x89}, /* 3VDD */
+ {0x1D, 0x8a, 0x8b}, /* 3VSB */
+ {0x1E, 0x8c, 0x8d}, /* VBAT */
+ {0x1F, 0xa6, 0xa7}, /* VSEN12 */
+ {0x20, 0xaa, 0xab}, /* VSEN13 */
+ {0x21, 0x96, 0x97}, /* VSEN14 */
+ {0x22, 0x9a, 0x9b}, /* VSEN15 */
+ {0x23, 0x9e, 0x9f}, /* VSEN16 */
+ {0x24, 0xa2, 0xa3}, /* VSEN17 */
+};
+#define W83795_REG_VRLSB 0x3C
+#define VRLSB_SHIFT 6
+
+static const u8 W83795_REG_IN_HL_LSB[] = {
+ 0x8e, /* VSEN1-4 */
+ 0x90, /* VSEN5-8 */
+ 0x92, /* VSEN9-11 */
+ 0x94, /* VTT, 3VDD, 3VSB, 3VBAT */
+ 0xa8, /* VSEN12 */
+ 0xac, /* VSEN13 */
+ 0x98, /* VSEN14 */
+ 0x9c, /* VSEN15 */
+ 0xa0, /* VSEN16 */
+ 0xa4, /* VSEN17 */
+};
+
+#define IN_LSB_REG(index, type) \
+ (((type) == 1) ? W83795_REG_IN_HL_LSB[(index)] \
+ : (W83795_REG_IN_HL_LSB[(index)] + 1))
+
+#define IN_LSB_REG_NUM 10
+
+#define IN_LSB_SHIFT 0
+#define IN_LSB_IDX 1
+static const u8 IN_LSB_SHIFT_IDX[][2] = {
+ /* High/Low LSB shift, LSB No. */
+ {0x00, 0x00}, /* VSEN1 */
+ {0x02, 0x00}, /* VSEN2 */
+ {0x04, 0x00}, /* VSEN3 */
+ {0x06, 0x00}, /* VSEN4 */
+ {0x00, 0x01}, /* VSEN5 */
+ {0x02, 0x01}, /* VSEN6 */
+ {0x04, 0x01}, /* VSEN7 */
+ {0x06, 0x01}, /* VSEN8 */
+ {0x00, 0x02}, /* VSEN9 */
+ {0x02, 0x02}, /* VSEN10 */
+ {0x04, 0x02}, /* VSEN11 */
+ {0x00, 0x03}, /* VTT */
+ {0x02, 0x03}, /* 3VDD */
+ {0x04, 0x03}, /* 3VSB */
+ {0x06, 0x03}, /* VBAT */
+ {0x06, 0x04}, /* VSEN12 */
+ {0x06, 0x05}, /* VSEN13 */
+ {0x06, 0x06}, /* VSEN14 */
+ {0x06, 0x07}, /* VSEN15 */
+ {0x06, 0x08}, /* VSEN16 */
+ {0x06, 0x09}, /* VSEN17 */
+};
+
+
+/* 3VDD, 3VSB, VBAT * 0.006 */
+#define REST_VLT_BEGIN 12 /* the 13th volt to 15th */
+#define REST_VLT_END 14 /* the 13th volt to 15th */
+
+#define W83795_REG_FAN(index) (0x2E + (index))
+#define W83795_REG_FAN_MIN_HL(index) (0xB6 + (index))
+#define W83795_REG_FAN_MIN_LSB(index) (0xC4 + (index) / 2)
+#define W83795_REG_FAN_MIN_LSB_SHIFT(index) \
+ (((index) % 1) ? 4 : 0)
+#define W83795_REG_FAN_CTRL_SHIFT(index) \
+ (((index) > 7) ? ((index) - 8) : (index))
+
+#define W83795_REG_VID_CTRL 0x6A
+
+#define ALARM_BEEP_REG_NUM 6
+#define W83795_REG_ALARM(index) (0x41 + (index))
+#define W83795_REG_BEEP(index) (0x50 + (index))
+
+#define W83795_REG_CLR_CHASSIS 0x4D
+
+
+#define W83795_REG_TEMP_NUM 6
+#define W83795_REG_FCMS1 0x201
+#define W83795_REG_FCMS2 0x208
+#define W83795_REG_TFMR(index) (0x202 + (index))
+#define W83795_REG_FOMC 0x20F
+#define W83795_REG_FOPFP(index) (0x218 + (index))
+
+#define W83795_REG_TSS(index) (0x209 + (index))
+
+#define PWM_OUTPUT 0
+#define PWM_START 1
+#define PWM_NONSTOP 2
+#define PWM_STOP_TIME 3
+#define PWM_DIV 4
+#define W83795_REG_PWM(index, nr) \
+ (((nr) == 0 ? 0x210 : \
+ (nr) == 1 ? 0x220 : \
+ (nr) == 2 ? 0x228 : \
+ (nr) == 3 ? 0x230 : 0x218) + (index))
+
+#define W83795_REG_FOPFP_DIV(index) \
+ (((index) < 8) ? ((index) + 1) : \
+ ((index) == 8) ? 12 : \
+ (16 << ((index) - 9)))
+
+#define W83795_REG_FTSH(index) (0x240 + (index) * 2)
+#define W83795_REG_FTSL(index) (0x241 + (index) * 2)
+#define W83795_REG_TFTS 0x250
+
+#define TEMP_PWM_TTTI 0
+#define TEMP_PWM_CTFS 1
+#define TEMP_PWM_HCT 2
+#define TEMP_PWM_HOT 3
+#define W83795_REG_TTTI(index) (0x260 + (index))
+#define W83795_REG_CTFS(index) (0x268 + (index))
+#define W83795_REG_HT(index) (0x270 + (index))
+
+#define SF4_TEMP 0
+#define SF4_PWM 1
+#define W83795_REG_SF4_TEMP(temp_num, index) \
+ (0x280 + 0x10 * (temp_num) + (index))
+#define W83795_REG_SF4_PWM(temp_num, index) \
+ (0x288 + 0x10 * (temp_num) + (index))
+
+#define W83795_REG_DTSC 0x301
+#define W83795_REG_DTSE 0x302
+#define W83795_REG_DTS(index) (0x26 + (index))
+
+#define DTS_CRIT 0
+#define DTS_CRIT_HYST 1
+#define DTS_WARN 2
+#define DTS_WARN_HYST 3
+#define W83795_REG_DTS_EXT(index) (0xB2 + (index))
+
+#define SETUP_PWM_DEFAULT 0
+#define SETUP_PWM_UPTIME 1
+#define SETUP_PWM_DOWNTIME 2
+#define W83795_REG_SETUP_PWM(index) (0x20C + (index))
+
+static inline u16 in_from_reg(u8 index, u16 val)
+{
+ if ((index >= REST_VLT_BEGIN) && (index <= REST_VLT_END))
+ return val * 6;
+ else
+ return val * 2;
+}
+
+static inline u16 in_to_reg(u8 index, u16 val)
+{
+ if ((index >= REST_VLT_BEGIN) && (index <= REST_VLT_END))
+ return val / 6;
+ else
+ return val / 2;
+}
+
+static inline unsigned long fan_from_reg(u16 val)
+{
+ if ((val >= 0xff0) || (val == 0))
+ return 0;
+ return 1350000UL / val;
+}
+
+static inline u16 fan_to_reg(long rpm)
+{
+ if (rpm <= 0)
+ return 0x0fff;
+ return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+}
+
+static inline unsigned long time_from_reg(u8 reg)
+{
+ return reg * 100;
+}
+
+static inline u8 time_to_reg(unsigned long val)
+{
+ return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
+}
+
+static inline long temp_from_reg(s8 reg)
+{
+ return reg * 1000;
+}
+
+static inline s8 temp_to_reg(long val, s8 min, s8 max)
+{
+ return SENSORS_LIMIT((val < 0 ? -val : val) / 1000, min, max);
+}
+
+
+enum chip_types {w83795g, w83795adg};
+
+struct w83795_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ unsigned long last_updated; /* In jiffies */
+ enum chip_types chip_type;
+
+ u8 bank;
+
+ u32 has_in; /* Enable monitor VIN or not */
+ u16 in[21][3]; /* Register value, read/high/low */
+ u8 in_lsb[10][3]; /* LSB Register value, high/low */
+ u8 has_gain; /* has gain: in17-20 * 8 */
+
+ u16 has_fan; /* Enable fan14-1 or not */
+ u16 fan[14]; /* Register value combine */
+ u16 fan_min[14]; /* Register value combine */
+
+ u8 has_temp; /* Enable monitor temp6-1 or not */
+ u8 temp[6][5]; /* current, crit, crit_hyst, warn, warn_hyst */
+ u8 temp_read_vrlsb[6];
+ u8 temp_mode; /* bit 0: TR mode, bit 1: TD mode */
+ u8 temp_src[3]; /* Register value */
+
+ u8 enable_dts; /* Enable PECI and SB-TSI,
+ * bit 0: =1 enable, =0 disable,
+ * bit 1: =1 AMD SB-TSI, =0 Intel PECI */
+ u8 has_dts; /* Enable monitor DTS temp */
+ u8 dts[8]; /* Register value */
+ u8 dts_read_vrlsb[8]; /* Register value */
+ u8 dts_ext[4]; /* Register value */
+
+ u8 has_pwm; /* 795g supports 8 pwm, 795adg only supports 2,
+ * no config register, only affected by chip
+ * type */
+ u8 pwm[8][5]; /* Register value, output, start, non stop, stop
+ * time, div */
+ u8 pwm_fcms[2]; /* Register value */
+ u8 pwm_tfmr[6]; /* Register value */
+ u8 pwm_fomc; /* Register value */
+
+ u16 target_speed[8]; /* Register value, target speed for speed
+ * cruise */
+ u8 tol_speed; /* tolerance of target speed */
+ u8 pwm_temp[6][4]; /* TTTI, CTFS, HCT, HOT */
+ u8 sf4_reg[6][2][7]; /* 6 temp, temp/dcpwm, 7 registers */
+
+ u8 setup_pwm[3]; /* Register value */
+
+ u8 alarms[6]; /* Register value */
+ u8 beeps[6]; /* Register value */
+ u8 beep_enable;
+
+ char valid;
+};
+
+/*
+ * Hardware access
+ */
+
+/* Ignore the possibility that somebody change bank outside the driver
+ * Must be called with data->update_lock held, except during initialization */
+static u8 w83795_read(struct i2c_client *client, u16 reg)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+ u8 res = 0xff;
+ u8 new_bank = reg >> 8;
+
+ new_bank |= data->bank & 0xfc;
+ if (data->bank != new_bank) {
+ if (i2c_smbus_write_byte_data
+ (client, W83795_REG_BANKSEL, new_bank) >= 0)
+ data->bank = new_bank;
+ else {
+ dev_err(&client->dev,
+ "set bank to %d failed, fall back "
+ "to bank %d, read reg 0x%x error\n",
+ new_bank, data->bank, reg);
+ res = 0x0; /* read 0x0 from the chip */
+ goto END;
+ }
+ }
+ res = i2c_smbus_read_byte_data(client, reg & 0xff);
+END:
+ return res;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83795_write(struct i2c_client *client, u16 reg, u8 value)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+ int res;
+ u8 new_bank = reg >> 8;
+
+ new_bank |= data->bank & 0xfc;
+ if (data->bank != new_bank) {
+ res = i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL,
+ new_bank);
+ if (res >= 0)
+ data->bank = new_bank;
+ else {
+ dev_err(&client->dev,
+ "set bank to %d failed, fall back "
+ "to bank %d, write reg 0x%x error\n",
+ new_bank, data->bank, reg);
+ goto END;
+ }
+ }
+
+ res = i2c_smbus_write_byte_data(client, reg & 0xff, value);
+END:
+ return res;
+}
+
+static struct w83795_data *w83795_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ u16 tmp;
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!(time_after(jiffies, data->last_updated + HZ * 2)
+ || !data->valid))
+ goto END;
+
+ /* Update the voltages value */
+ for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+ if (!(data->has_in & (1 << i)))
+ continue;
+ tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2;
+ tmp |= (w83795_read(client, W83795_REG_VRLSB)
+ >> VRLSB_SHIFT) & 0x03;
+ data->in[i][IN_READ] = tmp;
+ }
+
+ /* Update fan */
+ for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4;
+ data->fan[i] |=
+ (w83795_read(client, W83795_REG_VRLSB >> 4)) & 0x0F;
+ }
+
+ /* Update temperature */
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ /* even stop monitor, register still keep value, just read out
+ * it */
+ if (!(data->has_temp & (1 << i))) {
+ data->temp[i][TEMP_READ] = 0;
+ data->temp_read_vrlsb[i] = 0;
+ continue;
+ }
+ data->temp[i][TEMP_READ] =
+ w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]);
+ data->temp_read_vrlsb[i] =
+ w83795_read(client, W83795_REG_VRLSB);
+ }
+
+ /* Update dts temperature */
+ if (data->enable_dts != 0) {
+ for (i = 0; i < ARRAY_SIZE(data->dts); i++) {
+ if (!(data->has_dts & (1 << i)))
+ continue;
+ data->dts[i] =
+ w83795_read(client, W83795_REG_DTS(i));
+ data->dts_read_vrlsb[i] =
+ w83795_read(client, W83795_REG_VRLSB);
+ }
+ }
+
+ /* Update pwm output */
+ for (i = 0; i < data->has_pwm; i++) {
+ data->pwm[i][PWM_OUTPUT] =
+ w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
+ }
+
+ /* update alarm */
+ for (i = 0; i < ALARM_BEEP_REG_NUM; i++)
+ data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+
+END:
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+/*
+ * Sysfs attributes
+ */
+
+#define ALARM_STATUS 0
+#define BEEP_ENABLE 1
+static ssize_t
+show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index >> 3;
+ int bit = sensor_attr->index & 0x07;
+ u8 val;
+
+ if (ALARM_STATUS == nr) {
+ val = (data->alarms[index] >> (bit)) & 1;
+ } else { /* BEEP_ENABLE */
+ val = (data->beeps[index] >> (bit)) & 1;
+ }
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index >> 3;
+ int shift = sensor_attr->index & 0x07;
+ u8 beep_bit = 1 << shift;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beeps[index] = w83795_read(client, W83795_REG_BEEP(index));
+ data->beeps[index] &= ~beep_bit;
+ data->beeps[index] |= val << shift;
+ w83795_write(client, W83795_REG_BEEP(index), data->beeps[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_beep_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ return sprintf(buf, "%u\n", data->beep_enable);
+}
+
+static ssize_t
+store_beep_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+ u8 tmp;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beep_enable = val;
+ tmp = w83795_read(client, W83795_REG_BEEP(5));
+ tmp &= 0x7f;
+ tmp |= val << 7;
+ w83795_write(client, W83795_REG_BEEP(5), tmp);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* Write any value to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ u8 val;
+
+ mutex_lock(&data->update_lock);
+ val = w83795_read(client, W83795_REG_CLR_CHASSIS);
+ val |= 0x80;
+ w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define FAN_INPUT 0
+#define FAN_MIN 1
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ u16 val;
+
+ if (FAN_INPUT == nr)
+ val = data->fan[index] & 0x0fff;
+ else
+ val = data->fan_min[index] & 0x0fff;
+
+ return sprintf(buf, "%lu\n", fan_from_reg(val));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+ val = fan_to_reg(val);
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[index] = val;
+ w83795_write(client, W83795_REG_FAN_MIN_HL(index), (val >> 4) & 0xff);
+ val &= 0x0f;
+ if (index % 1) {
+ val <<= 4;
+ val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+ & 0x0f;
+ } else {
+ val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+ & 0xf0;
+ }
+ w83795_write(client, W83795_REG_FAN_MIN_LSB(index), val & 0xff);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u16 val;
+
+ switch (nr) {
+ case PWM_STOP_TIME:
+ val = time_from_reg(data->pwm[index][nr]);
+ break;
+ case PWM_DIV:
+ val = W83795_REG_FOPFP_DIV(data->pwm[index][nr] & 0x0f);
+ break;
+ default:
+ val = data->pwm[index][nr];
+ break;
+ }
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+ int i;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ switch (nr) {
+ case PWM_STOP_TIME:
+ val = time_to_reg(val);
+ break;
+ case PWM_DIV:
+ for (i = 0; i < 16; i++) {
+ if (W83795_REG_FOPFP_DIV(i) == val) {
+ val = i;
+ break;
+ }
+ }
+ if (i >= 16)
+ goto err_end;
+ val |= w83795_read(client, W83795_REG_PWM(index, nr)) & 0x80;
+ break;
+ default:
+ val = SENSORS_LIMIT(val, 0, 0xff);
+ break;
+ }
+ w83795_write(client, W83795_REG_PWM(index, nr), val);
+ data->pwm[index][nr] = val & 0xff;
+ mutex_unlock(&data->update_lock);
+ return count;
+err_end:
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ int index = sensor_attr->index;
+ u8 tmp;
+
+ if (1 == (data->pwm_fcms[0] & (1 << index))) {
+ tmp = 2;
+ goto out;
+ }
+ for (tmp = 0; tmp < 6; tmp++) {
+ if (data->pwm_tfmr[tmp] & (1 << index)) {
+ tmp = 3;
+ goto out;
+ }
+ }
+ if (data->pwm_fomc & (1 << index))
+ tmp = 0;
+ else
+ tmp = 1;
+
+out:
+ return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ unsigned long val;
+ int i;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val > 2)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ switch (val) {
+ case 0:
+ case 1:
+ data->pwm_fcms[0] &= ~(1 << index);
+ w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+ for (i = 0; i < 6; i++) {
+ data->pwm_tfmr[i] &= ~(1 << index);
+ w83795_write(client, W83795_REG_TFMR(i),
+ data->pwm_tfmr[i]);
+ }
+ data->pwm_fomc |= 1 << index;
+ data->pwm_fomc ^= val << index;
+ w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
+ break;
+ case 2:
+ data->pwm_fcms[0] |= (1 << index);
+ w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+ break;
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+}
+
+static ssize_t
+show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ int index = sensor_attr->index;
+ u8 val = index / 2;
+ u8 tmp = data->temp_src[val];
+
+ if (index % 1)
+ val = 4;
+ else
+ val = 0;
+ tmp >>= val;
+ tmp &= 0x0f;
+
+ return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_temp_src(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ unsigned long tmp;
+ u8 val = index / 2;
+
+ if (strict_strtoul(buf, 10, &tmp) < 0)
+ return -EINVAL;
+ tmp = SENSORS_LIMIT(tmp, 0, 15);
+
+ mutex_lock(&data->update_lock);
+ if (index % 1) {
+ tmp <<= 4;
+ data->temp_src[val] &= 0x0f;
+ } else {
+ data->temp_src[val] &= 0xf0;
+ }
+ data->temp_src[val] |= tmp;
+ w83795_write(client, W83795_REG_TSS(val), data->temp_src[val]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+#define TEMP_PWM_ENABLE 0
+#define TEMP_PWM_FAN_MAP 1
+static ssize_t
+show_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 tmp = 0xff;
+
+ switch (nr) {
+ case TEMP_PWM_ENABLE:
+ tmp = (data->pwm_fcms[1] >> index) & 1;
+ if (tmp)
+ tmp = 4;
+ else
+ tmp = 3;
+ break;
+ case TEMP_PWM_FAN_MAP:
+ tmp = data->pwm_tfmr[index];
+ break;
+ }
+
+ return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long tmp;
+
+ if (strict_strtoul(buf, 10, &tmp) < 0)
+ return -EINVAL;
+
+ switch (nr) {
+ case TEMP_PWM_ENABLE:
+ if ((tmp != 3) && (tmp != 4))
+ return -EINVAL;
+ tmp -= 3;
+ mutex_lock(&data->update_lock);
+ data->pwm_fcms[1] &= ~(1 << index);
+ data->pwm_fcms[1] |= tmp << index;
+ w83795_write(client, W83795_REG_FCMS2, data->pwm_fcms[1]);
+ mutex_unlock(&data->update_lock);
+ break;
+ case TEMP_PWM_FAN_MAP:
+ mutex_lock(&data->update_lock);
+ tmp = SENSORS_LIMIT(tmp, 0, 0xff);
+ w83795_write(client, W83795_REG_TFMR(index), tmp);
+ data->pwm_tfmr[index] = tmp;
+ mutex_unlock(&data->update_lock);
+ break;
+ }
+ return count;
+}
+
+#define FANIN_TARGET 0
+#define FANIN_TOL 1
+static ssize_t
+show_fanin(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u16 tmp = 0;
+
+ switch (nr) {
+ case FANIN_TARGET:
+ tmp = fan_from_reg(data->target_speed[index]);
+ break;
+ case FANIN_TOL:
+ tmp = data->tol_speed;
+ break;
+ }
+
+ return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_fanin(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ switch (nr) {
+ case FANIN_TARGET:
+ val = fan_to_reg(SENSORS_LIMIT(val, 0, 0xfff));
+ w83795_write(client, W83795_REG_FTSH(index), (val >> 4) & 0xff);
+ w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0);
+ data->target_speed[index] = val;
+ break;
+ case FANIN_TOL:
+ val = SENSORS_LIMIT(val, 0, 0x3f);
+ w83795_write(client, W83795_REG_TFTS, val);
+ data->tol_speed = val;
+ break;
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+
+static ssize_t
+show_temp_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ long tmp = temp_from_reg(data->pwm_temp[index][nr]);
+
+ return sprintf(buf, "%ld\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+ u8 tmp;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ val /= 1000;
+
+ mutex_lock(&data->update_lock);
+ switch (nr) {
+ case TEMP_PWM_TTTI:
+ val = SENSORS_LIMIT(val, 0, 0x7f);
+ w83795_write(client, W83795_REG_TTTI(index), val);
+ break;
+ case TEMP_PWM_CTFS:
+ val = SENSORS_LIMIT(val, 0, 0x7f);
+ w83795_write(client, W83795_REG_CTFS(index), val);
+ break;
+ case TEMP_PWM_HCT:
+ val = SENSORS_LIMIT(val, 0, 0x0f);
+ tmp = w83795_read(client, W83795_REG_HT(index));
+ tmp &= 0x0f;
+ tmp |= (val << 4) & 0xf0;
+ w83795_write(client, W83795_REG_HT(index), tmp);
+ break;
+ case TEMP_PWM_HOT:
+ val = SENSORS_LIMIT(val, 0, 0x0f);
+ tmp = w83795_read(client, W83795_REG_HT(index));
+ tmp &= 0xf0;
+ tmp |= val & 0x0f;
+ w83795_write(client, W83795_REG_HT(index), tmp);
+ break;
+ }
+ data->pwm_temp[index][nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_sf4_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+
+ return sprintf(buf, "%u\n", data->sf4_reg[index][SF4_PWM][nr]);
+}
+
+static ssize_t
+store_sf4_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ w83795_write(client, W83795_REG_SF4_PWM(index, nr), val);
+ data->sf4_reg[index][SF4_PWM][nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_sf4_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+
+ return sprintf(buf, "%u\n",
+ (data->sf4_reg[index][SF4_TEMP][nr]) * 1000);
+}
+
+static ssize_t
+store_sf4_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ val /= 1000;
+
+ mutex_lock(&data->update_lock);
+ w83795_write(client, W83795_REG_SF4_TEMP(index, nr), val);
+ data->sf4_reg[index][SF4_TEMP][nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ long temp = temp_from_reg(data->temp[index][nr] & 0x7f);
+
+ if (TEMP_READ == nr)
+ temp += ((data->temp_read_vrlsb[index] >> VRLSB_SHIFT) & 0x03)
+ * 250;
+ if (data->temp[index][nr] & 0x80)
+ temp = -temp;
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ long tmp;
+
+ if (strict_strtol(buf, 10, &tmp) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->temp[index][nr] = temp_to_reg(tmp, -128, 127);
+ w83795_write(client, W83795_REG_TEMP[index][nr], data->temp[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+static ssize_t
+show_dts_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ u8 tmp;
+
+ if (data->enable_dts == 0)
+ return sprintf(buf, "%d\n", 0);
+
+ if ((data->has_dts >> index) & 0x01) {
+ if (data->enable_dts & 2)
+ tmp = 5;
+ else
+ tmp = 6;
+ } else {
+ tmp = 0;
+ }
+
+ return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+show_dts(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ long temp = temp_from_reg(data->dts[index] & 0x7f);
+
+ temp += ((data->dts_read_vrlsb[index] >> VRLSB_SHIFT) & 0x03) * 250;
+ if (data->dts[index] & 0x80)
+ temp = -temp;
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+show_dts_ext(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ long temp = temp_from_reg(data->dts_ext[nr] & 0x7f);
+
+ if (data->dts_ext[nr] & 0x80)
+ temp = -temp;
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_dts_ext(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ long tmp;
+
+ if (strict_strtol(buf, 10, &tmp) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->dts_ext[nr] = temp_to_reg(tmp, -128, 127);
+ w83795_write(client, W83795_REG_DTS_EXT(nr), data->dts_ext[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+/*
+ Type 3: Thermal diode
+ Type 4: Thermistor
+
+ Temp5-6, default TR
+ Temp1-4, default TD
+*/
+
+static ssize_t
+show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ u8 tmp;
+
+ if (data->has_temp >> index & 0x01) {
+ if (data->temp_mode >> index & 0x01)
+ tmp = 3;
+ else
+ tmp = 4;
+ } else {
+ tmp = 0;
+ }
+
+ return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+store_temp_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ unsigned long val;
+ u8 tmp;
+ u32 mask;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if ((val != 4) && (val != 3))
+ return -EINVAL;
+ if ((index > 3) && (val == 3))
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ if (val == 3) {
+ val = TEMP_CTRL_TD;
+ data->has_temp |= 1 << index;
+ data->temp_mode |= 1 << index;
+ } else if (val == 4) {
+ val = TEMP_CTRL_TR;
+ data->has_temp |= 1 << index;
+ tmp = 1 << index;
+ data->temp_mode &= ~tmp;
+ }
+
+ if (index > 3)
+ tmp = w83795_read(client, W83795_REG_TEMP_CTRL1);
+ else
+ tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+
+ mask = 0x03 << W83795_REG_TEMP_CTRL[index][TEMP_CTRL_SHIFT];
+ tmp &= ~mask;
+ tmp |= W83795_REG_TEMP_CTRL[index][val];
+
+ mask = 1 << W83795_REG_TEMP_CTRL[index][TEMP_CTRL_HASIN_SHIFT];
+ data->has_in &= ~mask;
+
+ if (index > 3)
+ w83795_write(client, W83795_REG_TEMP_CTRL1, tmp);
+ else
+ w83795_write(client, W83795_REG_TEMP_CTRL2, tmp);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+/* show/store VIN */
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ u16 val = data->in[index][nr];
+ u8 lsb_idx;
+
+ switch (nr) {
+ case IN_READ:
+ /* calculate this value again by sensors as sensors3.conf */
+ if ((index >= 17) &&
+ ((data->has_gain >> (index - 17)) & 1))
+ val *= 8;
+ break;
+ case IN_MAX:
+ case IN_LOW:
+ lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+ val <<= 2;
+ val |= (data->in_lsb[lsb_idx][nr] >>
+ IN_LSB_SHIFT_IDX[lsb_idx][IN_LSB_SHIFT]) & 0x03;
+ if ((index >= 17) &&
+ ((data->has_gain >> (index - 17)) & 1))
+ val *= 8;
+ break;
+ }
+ val = in_from_reg(index, val);
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+ u8 tmp;
+ u8 lsb_idx;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ val = in_to_reg(index, val);
+
+ if ((index >= 17) &&
+ ((data->has_gain >> (index - 17)) & 1))
+ val /= 8;
+ val = SENSORS_LIMIT(val, 0, 0x3FF);
+ mutex_lock(&data->update_lock);
+
+ lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+ tmp = w83795_read(client, IN_LSB_REG(lsb_idx, nr));
+ tmp &= ~(0x03 << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]);
+ tmp |= (val & 0x03) << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT];
+ w83795_write(client, IN_LSB_REG(lsb_idx, nr), tmp);
+ data->in_lsb[lsb_idx][nr] = tmp;
+
+ tmp = (val >> 2) & 0xff;
+ w83795_write(client, W83795_REG_IN[index][nr], tmp);
+ data->in[index][nr] = tmp;
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+static ssize_t
+show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ u16 val = data->setup_pwm[nr];
+
+ switch (nr) {
+ case SETUP_PWM_UPTIME:
+ case SETUP_PWM_DOWNTIME:
+ val = time_from_reg(val);
+ break;
+ }
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_setup(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ switch (nr) {
+ case SETUP_PWM_DEFAULT:
+ val = SENSORS_LIMIT(val, 0, 0xff);
+ break;
+ case SETUP_PWM_UPTIME:
+ case SETUP_PWM_DOWNTIME:
+ val = time_to_reg(val);
+ if (val == 0)
+ return -EINVAL;
+ break;
+ }
+
+ mutex_lock(&data->update_lock);
+ data->setup_pwm[nr] = val;
+ w83795_write(client, W83795_REG_SETUP_PWM(nr), val);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+#define NOT_USED -1
+
+#define SENSOR_ATTR_IN(index) \
+ SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
+ IN_READ, index), \
+ SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_MAX, index), \
+ SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_LOW, index), \
+ SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + ((index > 14) ? 1 : 0)), \
+ SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, \
+ index + ((index > 14) ? 1 : 0))
+
+#define SENSOR_ATTR_FAN(index) \
+ SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
+ NULL, FAN_INPUT, index - 1), \
+ SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \
+ show_fan, store_fan_min, FAN_MIN, index - 1), \
+ SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + 31), \
+ SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 31)
+
+#define SENSOR_ATTR_PWM(index) \
+ SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \
+ store_pwm, PWM_OUTPUT, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_NONSTOP, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_START, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_STOP_TIME, index - 1), \
+ SENSOR_ATTR_2(fan##index##_div, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_DIV, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \
+ show_pwm_enable, store_pwm_enable, NOT_USED, index - 1)
+
+#define SENSOR_ATTR_FANIN_TARGET(index) \
+ SENSOR_ATTR_2(speed_cruise##index##_target, S_IWUSR | S_IRUGO, \
+ show_fanin, store_fanin, FANIN_TARGET, index - 1)
+
+#define SENSOR_ATTR_DTS(index) \
+ SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \
+ show_dts_mode, NULL, NOT_USED, index - 7), \
+ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_dts, \
+ NULL, NOT_USED, index - 7), \
+ SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_dts_ext, \
+ store_dts_ext, DTS_CRIT, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_dts_ext, store_dts_ext, DTS_CRIT_HYST, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_dts_ext, \
+ store_dts_ext, DTS_WARN, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR, \
+ show_dts_ext, store_dts_ext, DTS_WARN_HYST, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
+ show_alarm_beep, NULL, ALARM_STATUS, index + 17), \
+ SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 17)
+
+#define SENSOR_ATTR_TEMP(index) \
+ SENSOR_ATTR_2(temp##index##_type, S_IRUGO | S_IWUSR, \
+ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \
+ NULL, TEMP_READ, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_CRIT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_WARN, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_WARN_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
+ show_alarm_beep, NULL, ALARM_STATUS, \
+ index + (index > 4 ? 11 : 17)), \
+ SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, \
+ index + (index > 4 ? 11 : 17)), \
+ SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO, \
+ show_temp_src, store_temp_src, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
+ show_temp_pwm_enable, store_temp_pwm_enable, \
+ TEMP_PWM_ENABLE, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_channels_pwm, S_IWUSR | S_IRUGO, \
+ show_temp_pwm_enable, store_temp_pwm_enable, \
+ TEMP_PWM_FAN_MAP, index - 1), \
+ SENSOR_ATTR_2(thermal_cruise##index, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_TTTI, index - 1), \
+ SENSOR_ATTR_2(temp##index##_crit, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_CTFS, index - 1), \
+ SENSOR_ATTR_2(temp##index##_crit_hyst, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_HCT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_operation_hyst, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_HOT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 6, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 6, index - 1)
+
+
+static struct sensor_device_attribute_2 w83795_in[] = {
+ SENSOR_ATTR_IN(0),
+ SENSOR_ATTR_IN(1),
+ SENSOR_ATTR_IN(2),
+ SENSOR_ATTR_IN(3),
+ SENSOR_ATTR_IN(4),
+ SENSOR_ATTR_IN(5),
+ SENSOR_ATTR_IN(6),
+ SENSOR_ATTR_IN(7),
+ SENSOR_ATTR_IN(8),
+ SENSOR_ATTR_IN(9),
+ SENSOR_ATTR_IN(10),
+ SENSOR_ATTR_IN(11),
+ SENSOR_ATTR_IN(12),
+ SENSOR_ATTR_IN(13),
+ SENSOR_ATTR_IN(14),
+ SENSOR_ATTR_IN(15),
+ SENSOR_ATTR_IN(16),
+ SENSOR_ATTR_IN(17),
+ SENSOR_ATTR_IN(18),
+ SENSOR_ATTR_IN(19),
+ SENSOR_ATTR_IN(20),
+};
+
+static struct sensor_device_attribute_2 w83795_fan[] = {
+ SENSOR_ATTR_FAN(1),
+ SENSOR_ATTR_FAN(2),
+ SENSOR_ATTR_FAN(3),
+ SENSOR_ATTR_FAN(4),
+ SENSOR_ATTR_FAN(5),
+ SENSOR_ATTR_FAN(6),
+ SENSOR_ATTR_FAN(7),
+ SENSOR_ATTR_FAN(8),
+ SENSOR_ATTR_FAN(9),
+ SENSOR_ATTR_FAN(10),
+ SENSOR_ATTR_FAN(11),
+ SENSOR_ATTR_FAN(12),
+ SENSOR_ATTR_FAN(13),
+ SENSOR_ATTR_FAN(14),
+};
+
+static struct sensor_device_attribute_2 w83795_temp[] = {
+ SENSOR_ATTR_TEMP(1),
+ SENSOR_ATTR_TEMP(2),
+ SENSOR_ATTR_TEMP(3),
+ SENSOR_ATTR_TEMP(4),
+ SENSOR_ATTR_TEMP(5),
+ SENSOR_ATTR_TEMP(6),
+};
+
+static struct sensor_device_attribute_2 w83795_dts[] = {
+ SENSOR_ATTR_DTS(7),
+ SENSOR_ATTR_DTS(8),
+ SENSOR_ATTR_DTS(9),
+ SENSOR_ATTR_DTS(10),
+ SENSOR_ATTR_DTS(11),
+ SENSOR_ATTR_DTS(12),
+ SENSOR_ATTR_DTS(13),
+ SENSOR_ATTR_DTS(14),
+};
+
+static struct sensor_device_attribute_2 w83795_static[] = {
+ SENSOR_ATTR_FANIN_TARGET(1),
+ SENSOR_ATTR_FANIN_TARGET(2),
+ SENSOR_ATTR_FANIN_TARGET(3),
+ SENSOR_ATTR_FANIN_TARGET(4),
+ SENSOR_ATTR_FANIN_TARGET(5),
+ SENSOR_ATTR_FANIN_TARGET(6),
+ SENSOR_ATTR_FANIN_TARGET(7),
+ SENSOR_ATTR_FANIN_TARGET(8),
+ SENSOR_ATTR_PWM(1),
+ SENSOR_ATTR_PWM(2),
+};
+
+/* all registers existed in 795g than 795adg,
+ * like PWM3 - PWM8 */
+static struct sensor_device_attribute_2 w83795_left_reg[] = {
+ SENSOR_ATTR_PWM(3),
+ SENSOR_ATTR_PWM(4),
+ SENSOR_ATTR_PWM(5),
+ SENSOR_ATTR_PWM(6),
+ SENSOR_ATTR_PWM(7),
+ SENSOR_ATTR_PWM(8),
+};
+
+static struct sensor_device_attribute_2 sda_single_files[] = {
+ SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_chassis_clear, ALARM_STATUS, 46),
+ SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
+ store_beep_enable, NOT_USED, NOT_USED),
+ SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
+ store_fanin, FANIN_TOL, NOT_USED),
+ SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
+ SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
+ SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
+};
+
+/*
+ * Driver interface
+ */
+
+static void w83795_init_client(struct i2c_client *client)
+{
+ if (reset)
+ w83795_write(client, W83795_REG_CONFIG, 0x80);
+
+ /* Start monitoring */
+ w83795_write(client, W83795_REG_CONFIG,
+ w83795_read(client, W83795_REG_CONFIG) | 0x01);
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83795_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ u8 tmp, bank;
+ struct i2c_adapter *adapter = client->adapter;
+ unsigned short address = client->addr;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+ bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+
+ tmp = bank & 0x80 ? 0x5c : 0xa3;
+ /* Check Nuvoton vendor ID */
+ if (tmp != i2c_smbus_read_byte_data(client,
+ W83795_REG_VENDORID)) {
+ pr_debug("w83795: Detection failed at check "
+ "vendor id\n");
+ return -ENODEV;
+ }
+
+ /* If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR
+ should match */
+ if ((bank & 0x07) == 0
+ && (i2c_smbus_read_byte_data(client, W83795_REG_I2C_ADDR) & 0x7f) !=
+ address) {
+ pr_debug("w83795: Detection failed at check "
+ "i2c addr\n");
+ return -ENODEV;
+ }
+
+ /* Determine the chip type now */
+ if (0x79 != i2c_smbus_read_byte_data(client,
+ W83795_REG_CHIPID)) {
+ pr_debug("w83795: Detection failed at check "
+ "chip id\n");
+ return -ENODEV;
+ }
+
+#if 0
+ /* Check 795 chip type: 795G or 795ADG */
+ if (W83795_REG_CONFIG_CONFIG48 &
+ w83795_read(client, W83795_REG_CONFIG)) {
+ data->chip_type = w83795adg;
+ } else {
+ data->chip_type = w83795g;
+ }
+#endif
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(info->type, "w83795", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int w83795_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i;
+ u8 tmp;
+ struct device *dev = &client->dev;
+ struct w83795_data *data;
+ int err = 0;
+
+ data = kzalloc(sizeof(struct w83795_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+ mutex_init(&data->update_lock);
+
+ /* Initialize the chip */
+ w83795_init_client(client);
+
+ /* Check 795 chip type: 795G or 795ADG */
+ if (W83795_REG_CONFIG_CONFIG48 &
+ w83795_read(client, W83795_REG_CONFIG)) {
+ data->chip_type = w83795adg;
+ } else {
+ data->chip_type = w83795g;
+ }
+
+ data->has_in = w83795_read(client, W83795_REG_VOLT_CTRL1);
+ data->has_in |= w83795_read(client, W83795_REG_VOLT_CTRL2) << 8;
+ /* VSEN11-9 not for 795adg */
+ if (data->chip_type == w83795adg)
+ data->has_in &= 0xf8ff;
+ data->has_fan = w83795_read(client, W83795_REG_FANIN_CTRL1);
+ data->has_fan |= w83795_read(client, W83795_REG_FANIN_CTRL2) << 8;
+
+ /* VDSEN12-17 and TR1-6, TD1-4 use same register */
+ tmp = w83795_read(client, W83795_REG_TEMP_CTRL1);
+ if (tmp & 0x20)
+ data->enable_dts = 1;
+ else
+ data->enable_dts = 0;
+ data->has_temp = 0;
+ data->temp_mode = 0;
+ if (tmp & 0x08) {
+ if (tmp & 0x04)
+ data->has_temp |= 0x20;
+ else
+ data->has_in |= 0x10000;
+ }
+ if (tmp & 0x02) {
+ if (tmp & 0x01)
+ data->has_temp |= 0x10;
+ else
+ data->has_in |= 0x8000;
+ }
+ tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+ if (tmp & 0x40) {
+ data->has_temp |= 0x08;
+ if (!(tmp & 0x80))
+ data->temp_mode |= 0x08;
+ } else if (tmp & 0x80) {
+ data->has_in |= 0x100000;
+ }
+ if (tmp & 0x10) {
+ data->has_temp |= 0x04;
+ if (!(tmp & 0x20))
+ data->temp_mode |= 0x04;
+ } else if (tmp & 0x20) {
+ data->has_in |= 0x80000;
+ }
+ if (tmp & 0x04) {
+ data->has_temp |= 0x02;
+ if (!(tmp & 0x08))
+ data->temp_mode |= 0x02;
+ } else if (tmp & 0x08) {
+ data->has_in |= 0x40000;
+ }
+ if (tmp & 0x01) {
+ data->has_temp |= 0x01;
+ if (!(tmp & 0x02))
+ data->temp_mode |= 0x01;
+ } else if (tmp & 0x02) {
+ data->has_in |= 0x20000;
+ }
+
+ /* Check DTS enable status */
+ if (data->enable_dts == 0) {
+ data->has_dts = 0;
+ } else {
+ if (1 & w83795_read(client, W83795_REG_DTSC))
+ data->enable_dts |= 2;
+ data->has_dts = w83795_read(client, W83795_REG_DTSE);
+ }
+
+ /* First update the voltages measured value and limits */
+ for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+ if (!(data->has_in & (1 << i)))
+ continue;
+ data->in[i][IN_MAX] =
+ w83795_read(client, W83795_REG_IN[i][IN_MAX]);
+ data->in[i][IN_LOW] =
+ w83795_read(client, W83795_REG_IN[i][IN_LOW]);
+ tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2;
+ tmp |= (w83795_read(client, W83795_REG_VRLSB)
+ >> VRLSB_SHIFT) & 0x03;
+ data->in[i][IN_READ] = tmp;
+ }
+ for (i = 0; i < IN_LSB_REG_NUM; i++) {
+ data->in_lsb[i][IN_MAX] =
+ w83795_read(client, IN_LSB_REG(i, IN_MAX));
+ data->in_lsb[i][IN_LOW] =
+ w83795_read(client, IN_LSB_REG(i, IN_LOW));
+ }
+ data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f;
+
+ /* First update fan and limits */
+ for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ data->fan_min[i] =
+ w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4;
+ data->fan_min[i] |=
+ (w83795_read(client, W83795_REG_FAN_MIN_LSB(i) >>
+ W83795_REG_FAN_MIN_LSB_SHIFT(i))) & 0x0F;
+ data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4;
+ data->fan[i] |=
+ (w83795_read(client, W83795_REG_VRLSB >> 4)) & 0x0F;
+ }
+
+ /* temperature and limits */
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
+ data->temp[i][TEMP_CRIT] =
+ w83795_read(client, W83795_REG_TEMP[i][TEMP_CRIT]);
+ data->temp[i][TEMP_CRIT_HYST] =
+ w83795_read(client, W83795_REG_TEMP[i][TEMP_CRIT_HYST]);
+ data->temp[i][TEMP_WARN] =
+ w83795_read(client, W83795_REG_TEMP[i][TEMP_WARN]);
+ data->temp[i][TEMP_WARN_HYST] =
+ w83795_read(client, W83795_REG_TEMP[i][TEMP_WARN_HYST]);
+ data->temp[i][TEMP_READ] =
+ w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]);
+ data->temp_read_vrlsb[i] =
+ w83795_read(client, W83795_REG_VRLSB);
+ }
+
+ /* dts temperature and limits */
+ if (data->enable_dts != 0) {
+ data->dts_ext[DTS_CRIT] =
+ w83795_read(client, W83795_REG_DTS_EXT(DTS_CRIT));
+ data->dts_ext[DTS_CRIT_HYST] =
+ w83795_read(client, W83795_REG_DTS_EXT(DTS_CRIT_HYST));
+ data->dts_ext[DTS_WARN] =
+ w83795_read(client, W83795_REG_DTS_EXT(DTS_WARN));
+ data->dts_ext[DTS_WARN_HYST] =
+ w83795_read(client, W83795_REG_DTS_EXT(DTS_WARN_HYST));
+ for (i = 0; i < ARRAY_SIZE(data->dts); i++) {
+ if (!(data->has_dts & (1 << i)))
+ continue;
+ data->dts[i] = w83795_read(client, W83795_REG_DTS(i));
+ data->dts_read_vrlsb[i] =
+ w83795_read(client, W83795_REG_VRLSB);
+ }
+ }
+
+ /* First update temp source selction */
+ for (i = 0; i < 3; i++)
+ data->temp_src[i] = w83795_read(client, W83795_REG_TSS(i));
+
+ /* pwm and smart fan */
+ if (data->chip_type == w83795g)
+ data->has_pwm = 8;
+ else
+ data->has_pwm = 2;
+ data->pwm_fcms[0] = w83795_read(client, W83795_REG_FCMS1);
+ data->pwm_fcms[1] = w83795_read(client, W83795_REG_FCMS2);
+ /* w83795adg only support pwm2-0 */
+ for (i = 0; i < W83795_REG_TEMP_NUM; i++)
+ data->pwm_tfmr[i] = w83795_read(client, W83795_REG_TFMR(i));
+ data->pwm_fomc = w83795_read(client, W83795_REG_FOMC);
+ for (i = 0; i < data->has_pwm; i++) {
+ for (tmp = 0; tmp < 5; tmp++) {
+ data->pwm[i][tmp] =
+ w83795_read(client, W83795_REG_PWM(i, tmp));
+ }
+ }
+ for (i = 0; i < 8; i++) {
+ data->target_speed[i] =
+ w83795_read(client, W83795_REG_FTSH(i)) << 4;
+ data->target_speed[i] |=
+ w83795_read(client, W83795_REG_FTSL(i)) >> 4;
+ }
+ data->tol_speed = w83795_read(client, W83795_REG_TFTS) & 0x3f;
+
+ for (i = 0; i < W83795_REG_TEMP_NUM; i++) {
+ data->pwm_temp[i][TEMP_PWM_TTTI] =
+ w83795_read(client, W83795_REG_TTTI(i)) & 0x7f;
+ data->pwm_temp[i][TEMP_PWM_CTFS] =
+ w83795_read(client, W83795_REG_CTFS(i));
+ tmp = w83795_read(client, W83795_REG_HT(i));
+ data->pwm_temp[i][TEMP_PWM_HCT] = (tmp >> 4) & 0x0f;
+ data->pwm_temp[i][TEMP_PWM_HOT] = tmp & 0x0f;
+ }
+ for (i = 0; i < W83795_REG_TEMP_NUM; i++) {
+ for (tmp = 0; tmp < 7; tmp++) {
+ data->sf4_reg[i][SF4_TEMP][tmp] =
+ w83795_read(client,
+ W83795_REG_SF4_TEMP(i, tmp));
+ data->sf4_reg[i][SF4_PWM][tmp] =
+ w83795_read(client, W83795_REG_SF4_PWM(i, tmp));
+ }
+ }
+
+ /* Setup PWM Register */
+ for (i = 0; i < 3; i++) {
+ data->setup_pwm[i] =
+ w83795_read(client, W83795_REG_SETUP_PWM(i));
+ }
+
+ /* alarm and beep */
+ for (i = 0; i < ALARM_BEEP_REG_NUM; i++) {
+ data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+ data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+ }
+ data->beep_enable =
+ (w83795_read(client, W83795_REG_BEEP(5)) >> 7) & 0x01;
+
+ /* Register sysfs hooks */
+ for (i = 0; i < ARRAY_SIZE(w83795_in); i++) {
+ if (!(data->has_in & (1 << (i / 6))))
+ continue;
+ err = device_create_file(dev, &w83795_in[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) {
+ if (!(data->has_fan & (1 << (i / 5))))
+ continue;
+ err = device_create_file(dev, &w83795_fan[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
+ err = device_create_file(dev, &sda_single_files[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) {
+ if (!(data->has_temp & (1 << (i / 29))))
+ continue;
+ err = device_create_file(dev, &w83795_temp[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ if (data->enable_dts != 0) {
+ for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) {
+ if (!(data->has_dts & (1 << (i / 8))))
+ continue;
+ err = device_create_file(dev, &w83795_dts[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
+ if (data->chip_type == w83795g) {
+ for (i = 0; i < ARRAY_SIZE(w83795_left_reg); i++) {
+ err = device_create_file(dev,
+ &w83795_left_reg[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_static); i++) {
+ err = device_create_file(dev, &w83795_static[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+ /* Unregister sysfs hooks */
+exit_remove:
+ for (i = 0; i < ARRAY_SIZE(w83795_in); i++)
+ device_remove_file(dev, &w83795_in[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83795_fan); i++)
+ device_remove_file(dev, &w83795_fan[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+ device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+ if (data->chip_type == w83795g) {
+ for (i = 0; i < ARRAY_SIZE(w83795_left_reg); i++)
+ device_remove_file(dev, &w83795_left_reg[i].dev_attr);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_temp); i++)
+ device_remove_file(dev, &w83795_temp[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83795_dts); i++)
+ device_remove_file(dev, &w83795_dts[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83795_static); i++)
+ device_remove_file(dev, &w83795_static[i].dev_attr);
+
+ kfree(data);
+exit:
+ return err;
+}
+
+static int w83795_remove(struct i2c_client *client)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int i;
+
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(w83795_in); i++)
+ device_remove_file(dev, &w83795_in[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83795_fan); i++)
+ device_remove_file(dev, &w83795_fan[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+ device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+ if (data->chip_type == w83795g) {
+ for (i = 0; i < ARRAY_SIZE(w83795_left_reg); i++)
+ device_remove_file(dev, &w83795_left_reg[i].dev_attr);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_temp); i++)
+ device_remove_file(dev, &w83795_temp[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83795_dts); i++)
+ device_remove_file(dev, &w83795_dts[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83795_static); i++)
+ device_remove_file(dev, &w83795_static[i].dev_attr);
+
+ kfree(data);
+
+ return 0;
+}
+
+
+static const struct i2c_device_id w83795_id[] = {
+ { "w83795", w83795 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, w83795_id);
+
+static struct i2c_driver w83795_driver = {
+ .driver = {
+ .name = "w83795",
+ },
+ .probe = w83795_probe,
+ .remove = w83795_remove,
+ .id_table = w83795_id,
+
+ .class = I2C_CLASS_HWMON,
+ .detect = w83795_detect,
+ .address_list = normal_i2c,
+};
+
+static int __init sensors_w83795_init(void)
+{
+ return i2c_add_driver(&w83795_driver);
+}
+
+static void __exit sensors_w83795_exit(void)
+{
+ i2c_del_driver(&w83795_driver);
+}
+
+MODULE_AUTHOR("Wei Song");
+MODULE_DESCRIPTION("w83795 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83795_init);
+module_exit(sensors_w83795_exit);
projects / cascardo / linux.git / commitdiff