ARM: dts: exynos: Add initial support for Odroid XU board

The Hardkernel's Odroid XU board was first design with big.LITTLE SoC
from Samsung: the Exynos5410. Details:
1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is
   enabled),
2. 2 GB DDR3 RAM,
3. PowerVR SGX544MP3 GPU (not enabled in DTS),
4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4,
5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of
   revisions though),
6. eMMC 4.5 and microSD slots.

Comparing this board to Odroid XU3 (more popular), the differences are:
1. Exynos5410 instead of 5422,
2. MIPI DSI LCD connector,
3. Main PMIC: Maxim 77802 instead of S2MPS11,
4. USB3503+LAN9730 instead of integrated LAN9514,
5. eMMC 4.5 instead of eMMC 5.0,

This patch adds initial support for the XU board with working basic
functions, eMMC/SD and USB (including attached ethernet adapter).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Link: http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index f5deace..0ea7f14 100644 (file)
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -47,6 +47,7 @@ Required root node properties:
        - "hardkernel,odroid-u3"  - for Exynos4412-based Hardkernel Odroid U3.
        - "hardkernel,odroid-x"   - for Exynos4412-based Hardkernel Odroid X.
        - "hardkernel,odroid-x2"  - for Exynos4412-based Hardkernel Odroid X2.
+       - "hardkernel,odroid-xu"  - for Exynos5410-based Hardkernel Odroid XU.
        - "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
        - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
                                         Odroid XU3 Lite board.

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d..9a1fc0d 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -134,6 +134,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
        exynos5250-snow-rev5.dtb \
        exynos5250-spring.dtb \
        exynos5260-xyref5260.dtb \
+       exynos5410-odroidxu.dtb \
        exynos5410-smdk5410.dtb \
        exynos5420-arndale-octa.dtb \
        exynos5420-peach-pit.dtb \

diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644 (file)
index 0000000..9fe0450
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,121 @@
+/*
+ * Hardkernel Odroid XU board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+       model = "Hardkernel Odroid XU";
+       compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+       memory {
+               reg = <0x40000000 0x7ea00000>;
+       };
+
+       chosen {
+               linux,stdout-path = &serial_2;
+       };
+
+       emmc_pwrseq: pwrseq {
+               pinctrl-0 = <&emmc_nrst_pin>;
+               pinctrl-names = "default";
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+       };
+
+       fan0: pwm-fan {
+               compatible = "pwm-fan";
+               pwms = <&pwm 0 20972 0>;
+               cooling-min-state = <0>;
+               cooling-max-state = <3>;
+               #cooling-cells = <2>;
+               cooling-levels = <0 130 170 230>;
+       };
+
+       fin_pll: xxti {
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "fin_pll";
+               #clock-cells = <0>;
+       };
+
+       firmware@02073000 {
+               compatible = "samsung,secure-firmware";
+               reg = <0x02073000 0x1000>;
+       };
+};
+
+&mmc_0 {
+       status = "okay";
+       mmc-pwrseq = <&emmc_pwrseq>;
+       cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+       card-detect-delay = <200>;
+       samsung,dw-mshc-ciu-div = <3>;
+       samsung,dw-mshc-sdr-timing = <0 4>;
+       samsung,dw-mshc-ddr-timing = <0 2>;
+       samsung,dw-mshc-hs400-timing = <0 2>;
+       samsung,read-strobe-delay = <90>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+       bus-width = <8>;
+       cap-mmc-highspeed;
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;
+};
+
+&mmc_2 {
+       status = "okay";
+       card-detect-delay = <200>;
+       samsung,dw-mshc-ciu-div = <3>;
+       samsung,dw-mshc-sdr-timing = <0 4>;
+       samsung,dw-mshc-ddr-timing = <0 2>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+       bus-width = <4>;
+       cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+       emmc_nrst_pin: emmc-nrst {
+               samsung,pins = "gpd1-0";
+               samsung,pin-function = <0>;
+               samsung,pin-pud = <0>;
+               samsung,pin-drv = <0>;
+       };
+};
+
+&serial_0 {
+       status = "okay";
+};
+
+&serial_1 {
+       status = "okay";
+};
+
+&serial_2 {
+       status = "okay";
+};
+
+&serial_3 {
+       status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+       dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+       dr_mode = "peripheral";
+};