return 1;
ss_probe:
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */
ia64_psr(regs)->ri = p->ainsn.slot;
static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
if (p->ainsn.boostable == 1 && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */
reset_current_kprobe();
# sleep related files
obj-y += wakeup.o
-obj-y += main.o
+obj-y += sleep.o
obj-$(CONFIG_ACPI_SLEEP) += proc.o
+++ /dev/null
-/*
- * sleep.c - ACPI sleep support.
- *
- * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
- * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
- * Copyright (c) 2000-2003 Patrick Mochel
- * Copyright (c) 2003 Open Source Development Lab
- *
- * This file is released under the GPLv2.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/dmi.h>
-#include <linux/device.h>
-#include <linux/suspend.h>
-#include <linux/reboot.h>
-
-#include <asm/io.h>
-
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
-#include "sleep.h"
-
-u8 sleep_states[ACPI_S_STATE_COUNT];
-
-static void acpi_sleep_tts_switch(u32 acpi_state)
-{
- union acpi_object in_arg = { ACPI_TYPE_INTEGER };
- struct acpi_object_list arg_list = { 1, &in_arg };
- acpi_status status = AE_OK;
-
- in_arg.integer.value = acpi_state;
- status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- /*
- * OS can't evaluate the _TTS object correctly. Some warning
- * message will be printed. But it won't break anything.
- */
- printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
- }
-}
-
-static int tts_notify_reboot(struct notifier_block *this,
- unsigned long code, void *x)
-{
- acpi_sleep_tts_switch(ACPI_STATE_S5);
- return NOTIFY_DONE;
-}
-
-static struct notifier_block tts_notifier = {
- .notifier_call = tts_notify_reboot,
- .next = NULL,
- .priority = 0,
-};
-
-static int acpi_sleep_prepare(u32 acpi_state)
-{
-#ifdef CONFIG_ACPI_SLEEP
- /* do we have a wakeup address for S2 and S3? */
- if (acpi_state == ACPI_STATE_S3) {
- if (!acpi_wakeup_address) {
- return -EFAULT;
- }
- acpi_set_firmware_waking_vector(
- (acpi_physical_address)acpi_wakeup_address);
-
- }
- ACPI_FLUSH_CPU_CACHE();
- acpi_enable_wakeup_device_prep(acpi_state);
-#endif
- printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
- acpi_state);
- acpi_enter_sleep_state_prep(acpi_state);
- return 0;
-}
-
-#ifdef CONFIG_ACPI_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-/*
- * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
- * user to request that behavior by using the 'acpi_old_suspend_ordering'
- * kernel command line option that causes the following variable to be set.
- */
-static bool old_suspend_ordering;
-
-void __init acpi_old_suspend_ordering(void)
-{
- old_suspend_ordering = true;
-}
-
-/*
- * According to the ACPI specification the BIOS should make sure that ACPI is
- * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
- * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
- * on such systems during resume. Unfortunately that doesn't help in
- * particularly pathological cases in which SCI_EN has to be set directly on
- * resume, although the specification states very clearly that this flag is
- * owned by the hardware. The set_sci_en_on_resume variable will be set in such
- * cases.
- */
-static bool set_sci_en_on_resume;
-/*
- * The ACPI specification wants us to save NVS memory regions during hibernation
- * and to restore them during the subsequent resume. However, it is not certain
- * if this mechanism is going to work on all machines, so we allow the user to
- * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
- * option.
- */
-static bool s4_no_nvs;
-
-void __init acpi_s4_no_nvs(void)
-{
- s4_no_nvs = true;
-}
-
-/**
- * acpi_pm_disable_gpes - Disable the GPEs.
- */
-static int acpi_pm_disable_gpes(void)
-{
- acpi_disable_all_gpes();
- return 0;
-}
-
-/**
- * __acpi_pm_prepare - Prepare the platform to enter the target state.
- *
- * If necessary, set the firmware waking vector and do arch-specific
- * nastiness to get the wakeup code to the waking vector.
- */
-static int __acpi_pm_prepare(void)
-{
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
-
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
-}
-
-/**
- * acpi_pm_prepare - Prepare the platform to enter the target sleep
- * state and disable the GPEs.
- */
-static int acpi_pm_prepare(void)
-{
- int error = __acpi_pm_prepare();
-
- if (!error)
- acpi_disable_all_gpes();
- return error;
-}
-
-/**
- * acpi_pm_finish - Instruct the platform to leave a sleep state.
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-static void acpi_pm_finish(void)
-{
- u32 acpi_state = acpi_target_sleep_state;
-
- if (acpi_state == ACPI_STATE_S0)
- return;
-
- printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
- acpi_state);
- acpi_disable_wakeup_device(acpi_state);
- acpi_leave_sleep_state(acpi_state);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
-/**
- * acpi_pm_end - Finish up suspend sequence.
- */
-static void acpi_pm_end(void)
-{
- /*
- * This is necessary in case acpi_pm_finish() is not called during a
- * failing transition to a sleep state.
- */
- acpi_target_sleep_state = ACPI_STATE_S0;
- acpi_sleep_tts_switch(acpi_target_sleep_state);
-}
-#else /* !CONFIG_ACPI_SLEEP */
-#define acpi_target_sleep_state ACPI_STATE_S0
-#endif /* CONFIG_ACPI_SLEEP */
-
-#ifdef CONFIG_SUSPEND
-extern void do_suspend_lowlevel(void);
-
-static u32 acpi_suspend_states[] = {
- [PM_SUSPEND_ON] = ACPI_STATE_S0,
- [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
- [PM_SUSPEND_MEM] = ACPI_STATE_S3,
- [PM_SUSPEND_MAX] = ACPI_STATE_S5
-};
-
-/**
- * acpi_suspend_begin - Set the target system sleep state to the state
- * associated with given @pm_state, if supported.
- */
-static int acpi_suspend_begin(suspend_state_t pm_state)
-{
- u32 acpi_state = acpi_suspend_states[pm_state];
- int error = 0;
-
- if (sleep_states[acpi_state]) {
- acpi_target_sleep_state = acpi_state;
- acpi_sleep_tts_switch(acpi_target_sleep_state);
- } else {
- printk(KERN_ERR "ACPI does not support this state: %d\n",
- pm_state);
- error = -ENOSYS;
- }
- return error;
-}
-
-/**
- * acpi_suspend_enter - Actually enter a sleep state.
- * @pm_state: ignored
- *
- * Flush caches and go to sleep. For STR we have to call arch-specific
- * assembly, which in turn call acpi_enter_sleep_state().
- * It's unfortunate, but it works. Please fix if you're feeling frisky.
- */
-static int acpi_suspend_enter(suspend_state_t pm_state)
-{
- acpi_status status = AE_OK;
- unsigned long flags = 0;
- u32 acpi_state = acpi_target_sleep_state;
-
- ACPI_FLUSH_CPU_CACHE();
-
- /* Do arch specific saving of state. */
- if (acpi_state == ACPI_STATE_S3) {
- int error = acpi_save_state_mem();
-
- if (error)
- return error;
- }
-
- local_irq_save(flags);
- acpi_enable_wakeup_device(acpi_state);
- switch (acpi_state) {
- case ACPI_STATE_S1:
- barrier();
- status = acpi_enter_sleep_state(acpi_state);
- break;
-
- case ACPI_STATE_S3:
- do_suspend_lowlevel();
- break;
- }
-
- /* If ACPI is not enabled by the BIOS, we need to enable it here. */
- if (set_sci_en_on_resume)
- acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
- else
- acpi_enable();
-
- /* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(acpi_state);
-
- /* ACPI 3.0 specs (P62) says that it's the responsibility
- * of the OSPM to clear the status bit [ implying that the
- * POWER_BUTTON event should not reach userspace ]
- */
- if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
- acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
-
- /*
- * Disable and clear GPE status before interrupt is enabled. Some GPEs
- * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
- * acpi_leave_sleep_state will reenable specific GPEs later
- */
- acpi_disable_all_gpes();
-
- local_irq_restore(flags);
- printk(KERN_DEBUG "Back to C!\n");
-
- /* restore processor state */
- if (acpi_state == ACPI_STATE_S3)
- acpi_restore_state_mem();
-
- return ACPI_SUCCESS(status) ? 0 : -EFAULT;
-}
-
-static int acpi_suspend_state_valid(suspend_state_t pm_state)
-{
- u32 acpi_state;
-
- switch (pm_state) {
- case PM_SUSPEND_ON:
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- acpi_state = acpi_suspend_states[pm_state];
-
- return sleep_states[acpi_state];
- default:
- return 0;
- }
-}
-
-static struct platform_suspend_ops acpi_suspend_ops = {
- .valid = acpi_suspend_state_valid,
- .begin = acpi_suspend_begin,
- .prepare = acpi_pm_prepare,
- .enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
- .end = acpi_pm_end,
-};
-
-/**
- * acpi_suspend_begin_old - Set the target system sleep state to the
- * state associated with given @pm_state, if supported, and
- * execute the _PTS control method. This function is used if the
- * pre-ACPI 2.0 suspend ordering has been requested.
- */
-static int acpi_suspend_begin_old(suspend_state_t pm_state)
-{
- int error = acpi_suspend_begin(pm_state);
-
- if (!error)
- error = __acpi_pm_prepare();
- return error;
-}
-
-/*
- * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
- * been requested.
- */
-static struct platform_suspend_ops acpi_suspend_ops_old = {
- .valid = acpi_suspend_state_valid,
- .begin = acpi_suspend_begin_old,
- .prepare = acpi_pm_disable_gpes,
- .enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
- .end = acpi_pm_end,
- .recover = acpi_pm_finish,
-};
-
-static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
-{
- old_suspend_ordering = true;
- return 0;
-}
-
-static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
-{
- set_sci_en_on_resume = true;
- return 0;
-}
-
-static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
- {
- .callback = init_old_suspend_ordering,
- .ident = "Abit KN9 (nForce4 variant)",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
- DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
- },
- },
- {
- .callback = init_old_suspend_ordering,
- .ident = "HP xw4600 Workstation",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Apple MacBook 1,1",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Apple MacMini 1,1",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
- },
- },
- {},
-};
-#endif /* CONFIG_SUSPEND */
-
-#ifdef CONFIG_HIBERNATION
-static unsigned long s4_hardware_signature;
-static struct acpi_table_facs *facs;
-static bool nosigcheck;
-
-void __init acpi_no_s4_hw_signature(void)
-{
- nosigcheck = true;
-}
-
-static int acpi_hibernation_begin(void)
-{
- int error;
-
- error = s4_no_nvs ? 0 : hibernate_nvs_alloc();
- if (!error) {
- acpi_target_sleep_state = ACPI_STATE_S4;
- acpi_sleep_tts_switch(acpi_target_sleep_state);
- }
-
- return error;
-}
-
-static int acpi_hibernation_pre_snapshot(void)
-{
- int error = acpi_pm_prepare();
-
- if (!error)
- hibernate_nvs_save();
-
- return error;
-}
-
-static int acpi_hibernation_enter(void)
-{
- acpi_status status = AE_OK;
- unsigned long flags = 0;
-
- ACPI_FLUSH_CPU_CACHE();
-
- local_irq_save(flags);
- acpi_enable_wakeup_device(ACPI_STATE_S4);
- /* This shouldn't return. If it returns, we have a problem */
- status = acpi_enter_sleep_state(ACPI_STATE_S4);
- /* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4);
- local_irq_restore(flags);
-
- return ACPI_SUCCESS(status) ? 0 : -EFAULT;
-}
-
-static void acpi_hibernation_finish(void)
-{
- hibernate_nvs_free();
- acpi_pm_finish();
-}
-
-static void acpi_hibernation_leave(void)
-{
- /*
- * If ACPI is not enabled by the BIOS and the boot kernel, we need to
- * enable it here.
- */
- acpi_enable();
- /* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4);
- /* Check the hardware signature */
- if (facs && s4_hardware_signature != facs->hardware_signature) {
- printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
- "cannot resume!\n");
- panic("ACPI S4 hardware signature mismatch");
- }
- /* Restore the NVS memory area */
- hibernate_nvs_restore();
-}
-
-static void acpi_pm_enable_gpes(void)
-{
- acpi_enable_all_runtime_gpes();
-}
-
-static struct platform_hibernation_ops acpi_hibernation_ops = {
- .begin = acpi_hibernation_begin,
- .end = acpi_pm_end,
- .pre_snapshot = acpi_hibernation_pre_snapshot,
- .finish = acpi_hibernation_finish,
- .prepare = acpi_pm_prepare,
- .enter = acpi_hibernation_enter,
- .leave = acpi_hibernation_leave,
- .pre_restore = acpi_pm_disable_gpes,
- .restore_cleanup = acpi_pm_enable_gpes,
-};
-
-/**
- * acpi_hibernation_begin_old - Set the target system sleep state to
- * ACPI_STATE_S4 and execute the _PTS control method. This
- * function is used if the pre-ACPI 2.0 suspend ordering has been
- * requested.
- */
-static int acpi_hibernation_begin_old(void)
-{
- int error;
- /*
- * The _TTS object should always be evaluated before the _PTS object.
- * When the old_suspended_ordering is true, the _PTS object is
- * evaluated in the acpi_sleep_prepare.
- */
- acpi_sleep_tts_switch(ACPI_STATE_S4);
-
- error = acpi_sleep_prepare(ACPI_STATE_S4);
-
- if (!error) {
- if (!s4_no_nvs)
- error = hibernate_nvs_alloc();
- if (!error)
- acpi_target_sleep_state = ACPI_STATE_S4;
- }
- return error;
-}
-
-static int acpi_hibernation_pre_snapshot_old(void)
-{
- int error = acpi_pm_disable_gpes();
-
- if (!error)
- hibernate_nvs_save();
-
- return error;
-}
-
-/*
- * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
- * been requested.
- */
-static struct platform_hibernation_ops acpi_hibernation_ops_old = {
- .begin = acpi_hibernation_begin_old,
- .end = acpi_pm_end,
- .pre_snapshot = acpi_hibernation_pre_snapshot_old,
- .finish = acpi_hibernation_finish,
- .prepare = acpi_pm_disable_gpes,
- .enter = acpi_hibernation_enter,
- .leave = acpi_hibernation_leave,
- .pre_restore = acpi_pm_disable_gpes,
- .restore_cleanup = acpi_pm_enable_gpes,
- .recover = acpi_pm_finish,
-};
-#endif /* CONFIG_HIBERNATION */
-
-int acpi_suspend(u32 acpi_state)
-{
- suspend_state_t states[] = {
- [1] = PM_SUSPEND_STANDBY,
- [3] = PM_SUSPEND_MEM,
- [5] = PM_SUSPEND_MAX
- };
-
- if (acpi_state < 6 && states[acpi_state])
- return pm_suspend(states[acpi_state]);
- if (acpi_state == 4)
- return hibernate();
- return -EINVAL;
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * acpi_pm_device_sleep_state - return preferred power state of ACPI device
- * in the system sleep state given by %acpi_target_sleep_state
- * @dev: device to examine; its driver model wakeup flags control
- * whether it should be able to wake up the system
- * @d_min_p: used to store the upper limit of allowed states range
- * Return value: preferred power state of the device on success, -ENODEV on
- * failure (ie. if there's no 'struct acpi_device' for @dev)
- *
- * Find the lowest power (highest number) ACPI device power state that
- * device @dev can be in while the system is in the sleep state represented
- * by %acpi_target_sleep_state. If @wake is nonzero, the device should be
- * able to wake up the system from this sleep state. If @d_min_p is set,
- * the highest power (lowest number) device power state of @dev allowed
- * in this system sleep state is stored at the location pointed to by it.
- *
- * The caller must ensure that @dev is valid before using this function.
- * The caller is also responsible for figuring out if the device is
- * supposed to be able to wake up the system and passing this information
- * via @wake.
- */
-
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
-{
- acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
- struct acpi_device *adev;
- char acpi_method[] = "_SxD";
- unsigned long long d_min, d_max;
-
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
- printk(KERN_DEBUG "ACPI handle has no context!\n");
- return -ENODEV;
- }
-
- acpi_method[2] = '0' + acpi_target_sleep_state;
- /*
- * If the sleep state is S0, we will return D3, but if the device has
- * _S0W, we will use the value from _S0W
- */
- d_min = ACPI_STATE_D0;
- d_max = ACPI_STATE_D3;
-
- /*
- * If present, _SxD methods return the minimum D-state (highest power
- * state) we can use for the corresponding S-states. Otherwise, the
- * minimum D-state is D0 (ACPI 3.x).
- *
- * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
- * provided -- that's our fault recovery, we ignore retval.
- */
- if (acpi_target_sleep_state > ACPI_STATE_S0)
- acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
-
- /*
- * If _PRW says we can wake up the system from the target sleep state,
- * the D-state returned by _SxD is sufficient for that (we assume a
- * wakeup-aware driver if wake is set). Still, if _SxW exists
- * (ACPI 3.x), it should return the maximum (lowest power) D-state that
- * can wake the system. _S0W may be valid, too.
- */
- if (acpi_target_sleep_state == ACPI_STATE_S0 ||
- (device_may_wakeup(dev) && adev->wakeup.state.enabled &&
- adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
- acpi_status status;
-
- acpi_method[3] = 'W';
- status = acpi_evaluate_integer(handle, acpi_method, NULL,
- &d_max);
- if (ACPI_FAILURE(status)) {
- d_max = d_min;
- } else if (d_max < d_min) {
- /* Warn the user of the broken DSDT */
- printk(KERN_WARNING "ACPI: Wrong value from %s\n",
- acpi_method);
- /* Sanitize it */
- d_min = d_max;
- }
- }
-
- if (d_min_p)
- *d_min_p = d_min;
- return d_max;
-}
-
-/**
- * acpi_pm_device_sleep_wake - enable or disable the system wake-up
- * capability of given device
- * @dev: device to handle
- * @enable: 'true' - enable, 'false' - disable the wake-up capability
- */
-int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
-{
- acpi_handle handle;
- struct acpi_device *adev;
-
- if (!device_may_wakeup(dev))
- return -EINVAL;
-
- handle = DEVICE_ACPI_HANDLE(dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
- printk(KERN_DEBUG "ACPI handle has no context!\n");
- return -ENODEV;
- }
-
- return enable ?
- acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
- acpi_disable_wakeup_device_power(adev);
-}
-#endif
-
-static void acpi_power_off_prepare(void)
-{
- /* Prepare to power off the system */
- acpi_sleep_prepare(ACPI_STATE_S5);
- acpi_disable_all_gpes();
-}
-
-static void acpi_power_off(void)
-{
- /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
- printk("%s called\n", __func__);
- local_irq_disable();
- acpi_enable_wakeup_device(ACPI_STATE_S5);
- acpi_enter_sleep_state(ACPI_STATE_S5);
-}
-
-int __init acpi_sleep_init(void)
-{
- acpi_status status;
- u8 type_a, type_b;
-#ifdef CONFIG_SUSPEND
- int i = 0;
-
- dmi_check_system(acpisleep_dmi_table);
-#endif
-
- if (acpi_disabled)
- return 0;
-
- sleep_states[ACPI_STATE_S0] = 1;
- printk(KERN_INFO PREFIX "(supports S0");
-
-#ifdef CONFIG_SUSPEND
- for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
- status = acpi_get_sleep_type_data(i, &type_a, &type_b);
- if (ACPI_SUCCESS(status)) {
- sleep_states[i] = 1;
- printk(" S%d", i);
- }
- }
-
- suspend_set_ops(old_suspend_ordering ?
- &acpi_suspend_ops_old : &acpi_suspend_ops);
-#endif
-
-#ifdef CONFIG_HIBERNATION
- status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
- if (ACPI_SUCCESS(status)) {
- hibernation_set_ops(old_suspend_ordering ?
- &acpi_hibernation_ops_old : &acpi_hibernation_ops);
- sleep_states[ACPI_STATE_S4] = 1;
- printk(" S4");
- if (!nosigcheck) {
- acpi_get_table(ACPI_SIG_FACS, 1,
- (struct acpi_table_header **)&facs);
- if (facs)
- s4_hardware_signature =
- facs->hardware_signature;
- }
- }
-#endif
- status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
- if (ACPI_SUCCESS(status)) {
- sleep_states[ACPI_STATE_S5] = 1;
- printk(" S5");
- pm_power_off_prepare = acpi_power_off_prepare;
- pm_power_off = acpi_power_off;
- }
- printk(")\n");
- /*
- * Register the tts_notifier to reboot notifier list so that the _TTS
- * object can also be evaluated when the system enters S5.
- */
- register_reboot_notifier(&tts_notifier);
- return 0;
-}
--- /dev/null
+/*
+ * sleep.c - ACPI sleep support.
+ *
+ * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
+ * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
+ * Copyright (c) 2000-2003 Patrick Mochel
+ * Copyright (c) 2003 Open Source Development Lab
+ *
+ * This file is released under the GPLv2.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/dmi.h>
+#include <linux/device.h>
+#include <linux/suspend.h>
+#include <linux/reboot.h>
+
+#include <asm/io.h>
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include "sleep.h"
+
+u8 sleep_states[ACPI_S_STATE_COUNT];
+
+static void acpi_sleep_tts_switch(u32 acpi_state)
+{
+ union acpi_object in_arg = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list arg_list = { 1, &in_arg };
+ acpi_status status = AE_OK;
+
+ in_arg.integer.value = acpi_state;
+ status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ /*
+ * OS can't evaluate the _TTS object correctly. Some warning
+ * message will be printed. But it won't break anything.
+ */
+ printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
+ }
+}
+
+static int tts_notify_reboot(struct notifier_block *this,
+ unsigned long code, void *x)
+{
+ acpi_sleep_tts_switch(ACPI_STATE_S5);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block tts_notifier = {
+ .notifier_call = tts_notify_reboot,
+ .next = NULL,
+ .priority = 0,
+};
+
+static int acpi_sleep_prepare(u32 acpi_state)
+{
+#ifdef CONFIG_ACPI_SLEEP
+ /* do we have a wakeup address for S2 and S3? */
+ if (acpi_state == ACPI_STATE_S3) {
+ if (!acpi_wakeup_address) {
+ return -EFAULT;
+ }
+ acpi_set_firmware_waking_vector(
+ (acpi_physical_address)acpi_wakeup_address);
+
+ }
+ ACPI_FLUSH_CPU_CACHE();
+ acpi_enable_wakeup_device_prep(acpi_state);
+#endif
+ printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
+ acpi_state);
+ acpi_enter_sleep_state_prep(acpi_state);
+ return 0;
+}
+
+#ifdef CONFIG_ACPI_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+/*
+ * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
+ * user to request that behavior by using the 'acpi_old_suspend_ordering'
+ * kernel command line option that causes the following variable to be set.
+ */
+static bool old_suspend_ordering;
+
+void __init acpi_old_suspend_ordering(void)
+{
+ old_suspend_ordering = true;
+}
+
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+/*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * and to restore them during the subsequent resume. However, it is not certain
+ * if this mechanism is going to work on all machines, so we allow the user to
+ * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
+ * option.
+ */
+static bool s4_no_nvs;
+
+void __init acpi_s4_no_nvs(void)
+{
+ s4_no_nvs = true;
+}
+
+/**
+ * acpi_pm_disable_gpes - Disable the GPEs.
+ */
+static int acpi_pm_disable_gpes(void)
+{
+ acpi_disable_all_gpes();
+ return 0;
+}
+
+/**
+ * __acpi_pm_prepare - Prepare the platform to enter the target state.
+ *
+ * If necessary, set the firmware waking vector and do arch-specific
+ * nastiness to get the wakeup code to the waking vector.
+ */
+static int __acpi_pm_prepare(void)
+{
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
+
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+}
+
+/**
+ * acpi_pm_prepare - Prepare the platform to enter the target sleep
+ * state and disable the GPEs.
+ */
+static int acpi_pm_prepare(void)
+{
+ int error = __acpi_pm_prepare();
+
+ if (!error)
+ acpi_disable_all_gpes();
+ return error;
+}
+
+/**
+ * acpi_pm_finish - Instruct the platform to leave a sleep state.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+static void acpi_pm_finish(void)
+{
+ u32 acpi_state = acpi_target_sleep_state;
+
+ if (acpi_state == ACPI_STATE_S0)
+ return;
+
+ printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
+ acpi_state);
+ acpi_disable_wakeup_device(acpi_state);
+ acpi_leave_sleep_state(acpi_state);
+
+ /* reset firmware waking vector */
+ acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+
+ acpi_target_sleep_state = ACPI_STATE_S0;
+}
+
+/**
+ * acpi_pm_end - Finish up suspend sequence.
+ */
+static void acpi_pm_end(void)
+{
+ /*
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
+ */
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
+}
+#else /* !CONFIG_ACPI_SLEEP */
+#define acpi_target_sleep_state ACPI_STATE_S0
+#endif /* CONFIG_ACPI_SLEEP */
+
+#ifdef CONFIG_SUSPEND
+extern void do_suspend_lowlevel(void);
+
+static u32 acpi_suspend_states[] = {
+ [PM_SUSPEND_ON] = ACPI_STATE_S0,
+ [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
+ [PM_SUSPEND_MEM] = ACPI_STATE_S3,
+ [PM_SUSPEND_MAX] = ACPI_STATE_S5
+};
+
+/**
+ * acpi_suspend_begin - Set the target system sleep state to the state
+ * associated with given @pm_state, if supported.
+ */
+static int acpi_suspend_begin(suspend_state_t pm_state)
+{
+ u32 acpi_state = acpi_suspend_states[pm_state];
+ int error = 0;
+
+ if (sleep_states[acpi_state]) {
+ acpi_target_sleep_state = acpi_state;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
+ } else {
+ printk(KERN_ERR "ACPI does not support this state: %d\n",
+ pm_state);
+ error = -ENOSYS;
+ }
+ return error;
+}
+
+/**
+ * acpi_suspend_enter - Actually enter a sleep state.
+ * @pm_state: ignored
+ *
+ * Flush caches and go to sleep. For STR we have to call arch-specific
+ * assembly, which in turn call acpi_enter_sleep_state().
+ * It's unfortunate, but it works. Please fix if you're feeling frisky.
+ */
+static int acpi_suspend_enter(suspend_state_t pm_state)
+{
+ acpi_status status = AE_OK;
+ unsigned long flags = 0;
+ u32 acpi_state = acpi_target_sleep_state;
+
+ ACPI_FLUSH_CPU_CACHE();
+
+ /* Do arch specific saving of state. */
+ if (acpi_state == ACPI_STATE_S3) {
+ int error = acpi_save_state_mem();
+
+ if (error)
+ return error;
+ }
+
+ local_irq_save(flags);
+ acpi_enable_wakeup_device(acpi_state);
+ switch (acpi_state) {
+ case ACPI_STATE_S1:
+ barrier();
+ status = acpi_enter_sleep_state(acpi_state);
+ break;
+
+ case ACPI_STATE_S3:
+ do_suspend_lowlevel();
+ break;
+ }
+
+ /* If ACPI is not enabled by the BIOS, we need to enable it here. */
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(acpi_state);
+
+ /* ACPI 3.0 specs (P62) says that it's the responsibility
+ * of the OSPM to clear the status bit [ implying that the
+ * POWER_BUTTON event should not reach userspace ]
+ */
+ if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
+ acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
+
+ /*
+ * Disable and clear GPE status before interrupt is enabled. Some GPEs
+ * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
+ * acpi_leave_sleep_state will reenable specific GPEs later
+ */
+ acpi_disable_all_gpes();
+
+ local_irq_restore(flags);
+ printk(KERN_DEBUG "Back to C!\n");
+
+ /* restore processor state */
+ if (acpi_state == ACPI_STATE_S3)
+ acpi_restore_state_mem();
+
+ return ACPI_SUCCESS(status) ? 0 : -EFAULT;
+}
+
+static int acpi_suspend_state_valid(suspend_state_t pm_state)
+{
+ u32 acpi_state;
+
+ switch (pm_state) {
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ acpi_state = acpi_suspend_states[pm_state];
+
+ return sleep_states[acpi_state];
+ default:
+ return 0;
+ }
+}
+
+static struct platform_suspend_ops acpi_suspend_ops = {
+ .valid = acpi_suspend_state_valid,
+ .begin = acpi_suspend_begin,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_suspend_enter,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+};
+
+/**
+ * acpi_suspend_begin_old - Set the target system sleep state to the
+ * state associated with given @pm_state, if supported, and
+ * execute the _PTS control method. This function is used if the
+ * pre-ACPI 2.0 suspend ordering has been requested.
+ */
+static int acpi_suspend_begin_old(suspend_state_t pm_state)
+{
+ int error = acpi_suspend_begin(pm_state);
+
+ if (!error)
+ error = __acpi_pm_prepare();
+ return error;
+}
+
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_suspend_ops acpi_suspend_ops_old = {
+ .valid = acpi_suspend_state_valid,
+ .begin = acpi_suspend_begin_old,
+ .prepare = acpi_pm_disable_gpes,
+ .enter = acpi_suspend_enter,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+ .recover = acpi_pm_finish,
+};
+
+static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
+{
+ old_suspend_ordering = true;
+ return 0;
+}
+
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
+static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "Abit KN9 (nForce4 variant)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
+ DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
+ },
+ },
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "HP xw4600 Workstation",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
+ {},
+};
+#endif /* CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+static unsigned long s4_hardware_signature;
+static struct acpi_table_facs *facs;
+static bool nosigcheck;
+
+void __init acpi_no_s4_hw_signature(void)
+{
+ nosigcheck = true;
+}
+
+static int acpi_hibernation_begin(void)
+{
+ int error;
+
+ error = s4_no_nvs ? 0 : hibernate_nvs_alloc();
+ if (!error) {
+ acpi_target_sleep_state = ACPI_STATE_S4;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
+ }
+
+ return error;
+}
+
+static int acpi_hibernation_pre_snapshot(void)
+{
+ int error = acpi_pm_prepare();
+
+ if (!error)
+ hibernate_nvs_save();
+
+ return error;
+}
+
+static int acpi_hibernation_enter(void)
+{
+ acpi_status status = AE_OK;
+ unsigned long flags = 0;
+
+ ACPI_FLUSH_CPU_CACHE();
+
+ local_irq_save(flags);
+ acpi_enable_wakeup_device(ACPI_STATE_S4);
+ /* This shouldn't return. If it returns, we have a problem */
+ status = acpi_enter_sleep_state(ACPI_STATE_S4);
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
+ local_irq_restore(flags);
+
+ return ACPI_SUCCESS(status) ? 0 : -EFAULT;
+}
+
+static void acpi_hibernation_finish(void)
+{
+ hibernate_nvs_free();
+ acpi_pm_finish();
+}
+
+static void acpi_hibernation_leave(void)
+{
+ /*
+ * If ACPI is not enabled by the BIOS and the boot kernel, we need to
+ * enable it here.
+ */
+ acpi_enable();
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
+ /* Check the hardware signature */
+ if (facs && s4_hardware_signature != facs->hardware_signature) {
+ printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
+ "cannot resume!\n");
+ panic("ACPI S4 hardware signature mismatch");
+ }
+ /* Restore the NVS memory area */
+ hibernate_nvs_restore();
+}
+
+static void acpi_pm_enable_gpes(void)
+{
+ acpi_enable_all_runtime_gpes();
+}
+
+static struct platform_hibernation_ops acpi_hibernation_ops = {
+ .begin = acpi_hibernation_begin,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_hibernation_pre_snapshot,
+ .finish = acpi_hibernation_finish,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_hibernation_enter,
+ .leave = acpi_hibernation_leave,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+};
+
+/**
+ * acpi_hibernation_begin_old - Set the target system sleep state to
+ * ACPI_STATE_S4 and execute the _PTS control method. This
+ * function is used if the pre-ACPI 2.0 suspend ordering has been
+ * requested.
+ */
+static int acpi_hibernation_begin_old(void)
+{
+ int error;
+ /*
+ * The _TTS object should always be evaluated before the _PTS object.
+ * When the old_suspended_ordering is true, the _PTS object is
+ * evaluated in the acpi_sleep_prepare.
+ */
+ acpi_sleep_tts_switch(ACPI_STATE_S4);
+
+ error = acpi_sleep_prepare(ACPI_STATE_S4);
+
+ if (!error) {
+ if (!s4_no_nvs)
+ error = hibernate_nvs_alloc();
+ if (!error)
+ acpi_target_sleep_state = ACPI_STATE_S4;
+ }
+ return error;
+}
+
+static int acpi_hibernation_pre_snapshot_old(void)
+{
+ int error = acpi_pm_disable_gpes();
+
+ if (!error)
+ hibernate_nvs_save();
+
+ return error;
+}
+
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_hibernation_ops acpi_hibernation_ops_old = {
+ .begin = acpi_hibernation_begin_old,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_hibernation_pre_snapshot_old,
+ .finish = acpi_hibernation_finish,
+ .prepare = acpi_pm_disable_gpes,
+ .enter = acpi_hibernation_enter,
+ .leave = acpi_hibernation_leave,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+ .recover = acpi_pm_finish,
+};
+#endif /* CONFIG_HIBERNATION */
+
+int acpi_suspend(u32 acpi_state)
+{
+ suspend_state_t states[] = {
+ [1] = PM_SUSPEND_STANDBY,
+ [3] = PM_SUSPEND_MEM,
+ [5] = PM_SUSPEND_MAX
+ };
+
+ if (acpi_state < 6 && states[acpi_state])
+ return pm_suspend(states[acpi_state]);
+ if (acpi_state == 4)
+ return hibernate();
+ return -EINVAL;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_pm_device_sleep_state - return preferred power state of ACPI device
+ * in the system sleep state given by %acpi_target_sleep_state
+ * @dev: device to examine; its driver model wakeup flags control
+ * whether it should be able to wake up the system
+ * @d_min_p: used to store the upper limit of allowed states range
+ * Return value: preferred power state of the device on success, -ENODEV on
+ * failure (ie. if there's no 'struct acpi_device' for @dev)
+ *
+ * Find the lowest power (highest number) ACPI device power state that
+ * device @dev can be in while the system is in the sleep state represented
+ * by %acpi_target_sleep_state. If @wake is nonzero, the device should be
+ * able to wake up the system from this sleep state. If @d_min_p is set,
+ * the highest power (lowest number) device power state of @dev allowed
+ * in this system sleep state is stored at the location pointed to by it.
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ * The caller is also responsible for figuring out if the device is
+ * supposed to be able to wake up the system and passing this information
+ * via @wake.
+ */
+
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+ char acpi_method[] = "_SxD";
+ unsigned long long d_min, d_max;
+
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ printk(KERN_DEBUG "ACPI handle has no context!\n");
+ return -ENODEV;
+ }
+
+ acpi_method[2] = '0' + acpi_target_sleep_state;
+ /*
+ * If the sleep state is S0, we will return D3, but if the device has
+ * _S0W, we will use the value from _S0W
+ */
+ d_min = ACPI_STATE_D0;
+ d_max = ACPI_STATE_D3;
+
+ /*
+ * If present, _SxD methods return the minimum D-state (highest power
+ * state) we can use for the corresponding S-states. Otherwise, the
+ * minimum D-state is D0 (ACPI 3.x).
+ *
+ * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+ * provided -- that's our fault recovery, we ignore retval.
+ */
+ if (acpi_target_sleep_state > ACPI_STATE_S0)
+ acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
+
+ /*
+ * If _PRW says we can wake up the system from the target sleep state,
+ * the D-state returned by _SxD is sufficient for that (we assume a
+ * wakeup-aware driver if wake is set). Still, if _SxW exists
+ * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+ * can wake the system. _S0W may be valid, too.
+ */
+ if (acpi_target_sleep_state == ACPI_STATE_S0 ||
+ (device_may_wakeup(dev) && adev->wakeup.state.enabled &&
+ adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
+ acpi_status status;
+
+ acpi_method[3] = 'W';
+ status = acpi_evaluate_integer(handle, acpi_method, NULL,
+ &d_max);
+ if (ACPI_FAILURE(status)) {
+ d_max = d_min;
+ } else if (d_max < d_min) {
+ /* Warn the user of the broken DSDT */
+ printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+ acpi_method);
+ /* Sanitize it */
+ d_min = d_max;
+ }
+ }
+
+ if (d_min_p)
+ *d_min_p = d_min;
+ return d_max;
+}
+
+/**
+ * acpi_pm_device_sleep_wake - enable or disable the system wake-up
+ * capability of given device
+ * @dev: device to handle
+ * @enable: 'true' - enable, 'false' - disable the wake-up capability
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ acpi_handle handle;
+ struct acpi_device *adev;
+
+ if (!device_may_wakeup(dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ printk(KERN_DEBUG "ACPI handle has no context!\n");
+ return -ENODEV;
+ }
+
+ return enable ?
+ acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
+ acpi_disable_wakeup_device_power(adev);
+}
+#endif
+
+static void acpi_power_off_prepare(void)
+{
+ /* Prepare to power off the system */
+ acpi_sleep_prepare(ACPI_STATE_S5);
+ acpi_disable_all_gpes();
+}
+
+static void acpi_power_off(void)
+{
+ /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
+ printk("%s called\n", __func__);
+ local_irq_disable();
+ acpi_enable_wakeup_device(ACPI_STATE_S5);
+ acpi_enter_sleep_state(ACPI_STATE_S5);
+}
+
+int __init acpi_sleep_init(void)
+{
+ acpi_status status;
+ u8 type_a, type_b;
+#ifdef CONFIG_SUSPEND
+ int i = 0;
+
+ dmi_check_system(acpisleep_dmi_table);
+#endif
+
+ if (acpi_disabled)
+ return 0;
+
+ sleep_states[ACPI_STATE_S0] = 1;
+ printk(KERN_INFO PREFIX "(supports S0");
+
+#ifdef CONFIG_SUSPEND
+ for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
+ status = acpi_get_sleep_type_data(i, &type_a, &type_b);
+ if (ACPI_SUCCESS(status)) {
+ sleep_states[i] = 1;
+ printk(" S%d", i);
+ }
+ }
+
+ suspend_set_ops(old_suspend_ordering ?
+ &acpi_suspend_ops_old : &acpi_suspend_ops);
+#endif
+
+#ifdef CONFIG_HIBERNATION
+ status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
+ if (ACPI_SUCCESS(status)) {
+ hibernation_set_ops(old_suspend_ordering ?
+ &acpi_hibernation_ops_old : &acpi_hibernation_ops);
+ sleep_states[ACPI_STATE_S4] = 1;
+ printk(" S4");
+ if (!nosigcheck) {
+ acpi_get_table(ACPI_SIG_FACS, 1,
+ (struct acpi_table_header **)&facs);
+ if (facs)
+ s4_hardware_signature =
+ facs->hardware_signature;
+ }
+ }
+#endif
+ status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
+ if (ACPI_SUCCESS(status)) {
+ sleep_states[ACPI_STATE_S5] = 1;
+ printk(" S5");
+ pm_power_off_prepare = acpi_power_off_prepare;
+ pm_power_off = acpi_power_off;
+ }
+ printk(")\n");
+ /*
+ * Register the tts_notifier to reboot notifier list so that the _TTS
+ * object can also be evaluated when the system enters S5.
+ */
+ register_reboot_notifier(&tts_notifier);
+ return 0;
+}
obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
-obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_PHANTOM) += phantom.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
+++ /dev/null
-/*
- * Driver for Dell laptop extras
- *
- * Copyright (c) Red Hat <mjg@redhat.com>
- *
- * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell
- * Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/backlight.h>
-#include <linux/err.h>
-#include <linux/dmi.h>
-#include <linux/io.h>
-#include <linux/rfkill.h>
-#include <linux/power_supply.h>
-#include <linux/acpi.h>
-#include "../firmware/dcdbas.h"
-
-#define BRIGHTNESS_TOKEN 0x7d
-
-/* This structure will be modified by the firmware when we enter
- * system management mode, hence the volatiles */
-
-struct calling_interface_buffer {
- u16 class;
- u16 select;
- volatile u32 input[4];
- volatile u32 output[4];
-} __packed;
-
-struct calling_interface_token {
- u16 tokenID;
- u16 location;
- union {
- u16 value;
- u16 stringlength;
- };
-};
-
-struct calling_interface_structure {
- struct dmi_header header;
- u16 cmdIOAddress;
- u8 cmdIOCode;
- u32 supportedCmds;
- struct calling_interface_token tokens[];
-} __packed;
-
-static int da_command_address;
-static int da_command_code;
-static int da_num_tokens;
-static struct calling_interface_token *da_tokens;
-
-static struct backlight_device *dell_backlight_device;
-static struct rfkill *wifi_rfkill;
-static struct rfkill *bluetooth_rfkill;
-static struct rfkill *wwan_rfkill;
-
-static const struct dmi_system_id __initdata dell_device_table[] = {
- {
- .ident = "Dell laptop",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_CHASSIS_TYPE, "8"),
- },
- },
- { }
-};
-
-static void parse_da_table(const struct dmi_header *dm)
-{
- /* Final token is a terminator, so we don't want to copy it */
- int tokens = (dm->length-11)/sizeof(struct calling_interface_token)-1;
- struct calling_interface_structure *table =
- container_of(dm, struct calling_interface_structure, header);
-
- /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least
- 6 bytes of entry */
-
- if (dm->length < 17)
- return;
-
- da_command_address = table->cmdIOAddress;
- da_command_code = table->cmdIOCode;
-
- da_tokens = krealloc(da_tokens, (da_num_tokens + tokens) *
- sizeof(struct calling_interface_token),
- GFP_KERNEL);
-
- if (!da_tokens)
- return;
-
- memcpy(da_tokens+da_num_tokens, table->tokens,
- sizeof(struct calling_interface_token) * tokens);
-
- da_num_tokens += tokens;
-}
-
-static void find_tokens(const struct dmi_header *dm)
-{
- switch (dm->type) {
- case 0xd4: /* Indexed IO */
- break;
- case 0xd5: /* Protected Area Type 1 */
- break;
- case 0xd6: /* Protected Area Type 2 */
- break;
- case 0xda: /* Calling interface */
- parse_da_table(dm);
- break;
- }
-}
-
-static int find_token_location(int tokenid)
-{
- int i;
- for (i = 0; i < da_num_tokens; i++) {
- if (da_tokens[i].tokenID == tokenid)
- return da_tokens[i].location;
- }
-
- return -1;
-}
-
-static struct calling_interface_buffer *
-dell_send_request(struct calling_interface_buffer *buffer, int class,
- int select)
-{
- struct smi_cmd command;
-
- command.magic = SMI_CMD_MAGIC;
- command.command_address = da_command_address;
- command.command_code = da_command_code;
- command.ebx = virt_to_phys(buffer);
- command.ecx = 0x42534931;
-
- buffer->class = class;
- buffer->select = select;
-
- dcdbas_smi_request(&command);
-
- return buffer;
-}
-
-/* Derived from information in DellWirelessCtl.cpp:
- Class 17, select 11 is radio control. It returns an array of 32-bit values.
-
- result[0]: return code
- result[1]:
- Bit 0: Hardware switch supported
- Bit 1: Wifi locator supported
- Bit 2: Wifi is supported
- Bit 3: Bluetooth is supported
- Bit 4: WWAN is supported
- Bit 5: Wireless keyboard supported
- Bits 6-7: Reserved
- Bit 8: Wifi is installed
- Bit 9: Bluetooth is installed
- Bit 10: WWAN is installed
- Bits 11-15: Reserved
- Bit 16: Hardware switch is on
- Bit 17: Wifi is blocked
- Bit 18: Bluetooth is blocked
- Bit 19: WWAN is blocked
- Bits 20-31: Reserved
- result[2]: NVRAM size in bytes
- result[3]: NVRAM format version number
-*/
-
-static int dell_rfkill_set(int radio, enum rfkill_state state)
-{
- struct calling_interface_buffer buffer;
- int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = (1 | (radio<<8) | (disable << 16));
- dell_send_request(&buffer, 17, 11);
-
- return 0;
-}
-
-static int dell_wifi_set(void *data, enum rfkill_state state)
-{
- return dell_rfkill_set(1, state);
-}
-
-static int dell_bluetooth_set(void *data, enum rfkill_state state)
-{
- return dell_rfkill_set(2, state);
-}
-
-static int dell_wwan_set(void *data, enum rfkill_state state)
-{
- return dell_rfkill_set(3, state);
-}
-
-static int dell_rfkill_get(int bit, enum rfkill_state *state)
-{
- struct calling_interface_buffer buffer;
- int status;
- int new_state = RFKILL_STATE_HARD_BLOCKED;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- dell_send_request(&buffer, 17, 11);
- status = buffer.output[1];
-
- if (status & (1<<16))
- new_state = RFKILL_STATE_SOFT_BLOCKED;
-
- if (status & (1<<bit))
- *state = new_state;
- else
- *state = RFKILL_STATE_UNBLOCKED;
-
- return 0;
-}
-
-static int dell_wifi_get(void *data, enum rfkill_state *state)
-{
- return dell_rfkill_get(17, state);
-}
-
-static int dell_bluetooth_get(void *data, enum rfkill_state *state)
-{
- return dell_rfkill_get(18, state);
-}
-
-static int dell_wwan_get(void *data, enum rfkill_state *state)
-{
- return dell_rfkill_get(19, state);
-}
-
-static int dell_setup_rfkill(void)
-{
- struct calling_interface_buffer buffer;
- int status;
- int ret;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- dell_send_request(&buffer, 17, 11);
- status = buffer.output[1];
-
- if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
- wifi_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WLAN);
- if (!wifi_rfkill)
- goto err_wifi;
- wifi_rfkill->name = "dell-wifi";
- wifi_rfkill->toggle_radio = dell_wifi_set;
- wifi_rfkill->get_state = dell_wifi_get;
- ret = rfkill_register(wifi_rfkill);
- if (ret)
- goto err_wifi;
- }
-
- if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) {
- bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH);
- if (!bluetooth_rfkill)
- goto err_bluetooth;
- bluetooth_rfkill->name = "dell-bluetooth";
- bluetooth_rfkill->toggle_radio = dell_bluetooth_set;
- bluetooth_rfkill->get_state = dell_bluetooth_get;
- ret = rfkill_register(bluetooth_rfkill);
- if (ret)
- goto err_bluetooth;
- }
-
- if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) {
- wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN);
- if (!wwan_rfkill)
- goto err_wwan;
- wwan_rfkill->name = "dell-wwan";
- wwan_rfkill->toggle_radio = dell_wwan_set;
- wwan_rfkill->get_state = dell_wwan_get;
- ret = rfkill_register(wwan_rfkill);
- if (ret)
- goto err_wwan;
- }
-
- return 0;
-err_wwan:
- if (wwan_rfkill)
- rfkill_free(wwan_rfkill);
- if (bluetooth_rfkill) {
- rfkill_unregister(bluetooth_rfkill);
- bluetooth_rfkill = NULL;
- }
-err_bluetooth:
- if (bluetooth_rfkill)
- rfkill_free(bluetooth_rfkill);
- if (wifi_rfkill) {
- rfkill_unregister(wifi_rfkill);
- wifi_rfkill = NULL;
- }
-err_wifi:
- if (wifi_rfkill)
- rfkill_free(wifi_rfkill);
-
- return ret;
-}
-
-static int dell_send_intensity(struct backlight_device *bd)
-{
- struct calling_interface_buffer buffer;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
- buffer.input[1] = bd->props.brightness;
-
- if (buffer.input[0] == -1)
- return -ENODEV;
-
- if (power_supply_is_system_supplied() > 0)
- dell_send_request(&buffer, 1, 2);
- else
- dell_send_request(&buffer, 1, 1);
-
- return 0;
-}
-
-static int dell_get_intensity(struct backlight_device *bd)
-{
- struct calling_interface_buffer buffer;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
-
- if (buffer.input[0] == -1)
- return -ENODEV;
-
- if (power_supply_is_system_supplied() > 0)
- dell_send_request(&buffer, 0, 2);
- else
- dell_send_request(&buffer, 0, 1);
-
- return buffer.output[1];
-}
-
-static struct backlight_ops dell_ops = {
- .get_brightness = dell_get_intensity,
- .update_status = dell_send_intensity,
-};
-
-static int __init dell_init(void)
-{
- struct calling_interface_buffer buffer;
- int max_intensity = 0;
- int ret;
-
- if (!dmi_check_system(dell_device_table))
- return -ENODEV;
-
- dmi_walk(find_tokens);
-
- if (!da_tokens) {
- printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n");
- return -ENODEV;
- }
-
- ret = dell_setup_rfkill();
-
- if (ret) {
- printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n");
- goto out;
- }
-
-#ifdef CONFIG_ACPI
- /* In the event of an ACPI backlight being available, don't
- * register the platform controller.
- */
- if (acpi_video_backlight_support())
- return 0;
-#endif
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
-
- if (buffer.input[0] != -1) {
- dell_send_request(&buffer, 0, 2);
- max_intensity = buffer.output[3];
- }
-
- if (max_intensity) {
- dell_backlight_device = backlight_device_register(
- "dell_backlight",
- NULL, NULL,
- &dell_ops);
-
- if (IS_ERR(dell_backlight_device)) {
- ret = PTR_ERR(dell_backlight_device);
- dell_backlight_device = NULL;
- goto out;
- }
-
- dell_backlight_device->props.max_brightness = max_intensity;
- dell_backlight_device->props.brightness =
- dell_get_intensity(dell_backlight_device);
- backlight_update_status(dell_backlight_device);
- }
-
- return 0;
-out:
- if (wifi_rfkill)
- rfkill_unregister(wifi_rfkill);
- if (bluetooth_rfkill)
- rfkill_unregister(bluetooth_rfkill);
- if (wwan_rfkill)
- rfkill_unregister(wwan_rfkill);
- kfree(da_tokens);
- return ret;
-}
-
-static void __exit dell_exit(void)
-{
- backlight_device_unregister(dell_backlight_device);
- if (wifi_rfkill)
- rfkill_unregister(wifi_rfkill);
- if (bluetooth_rfkill)
- rfkill_unregister(bluetooth_rfkill);
- if (wwan_rfkill)
- rfkill_unregister(wwan_rfkill);
-}
-
-module_init(dell_init);
-module_exit(dell_exit);
-
-MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
-MODULE_DESCRIPTION("Dell laptop driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*");
If you have an ACPI-compatible ASUS laptop, say Y or M here.
+config DELL_LAPTOP
+ tristate "Dell Laptop Extras (EXPERIMENTAL)"
+ depends on X86
+ depends on DCDBAS
+ depends on EXPERIMENTAL
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on RFKILL
+ default n
+ ---help---
+ This driver adds support for rfkill and backlight control to Dell
+ laptops.
+
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
depends on ACPI
obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
+obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
--- /dev/null
+/*
+ * Driver for Dell laptop extras
+ *
+ * Copyright (c) Red Hat <mjg@redhat.com>
+ *
+ * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell
+ * Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+#include <linux/rfkill.h>
+#include <linux/power_supply.h>
+#include <linux/acpi.h>
+#include "../../firmware/dcdbas.h"
+
+#define BRIGHTNESS_TOKEN 0x7d
+
+/* This structure will be modified by the firmware when we enter
+ * system management mode, hence the volatiles */
+
+struct calling_interface_buffer {
+ u16 class;
+ u16 select;
+ volatile u32 input[4];
+ volatile u32 output[4];
+} __packed;
+
+struct calling_interface_token {
+ u16 tokenID;
+ u16 location;
+ union {
+ u16 value;
+ u16 stringlength;
+ };
+};
+
+struct calling_interface_structure {
+ struct dmi_header header;
+ u16 cmdIOAddress;
+ u8 cmdIOCode;
+ u32 supportedCmds;
+ struct calling_interface_token tokens[];
+} __packed;
+
+static int da_command_address;
+static int da_command_code;
+static int da_num_tokens;
+static struct calling_interface_token *da_tokens;
+
+static struct backlight_device *dell_backlight_device;
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bluetooth_rfkill;
+static struct rfkill *wwan_rfkill;
+
+static const struct dmi_system_id __initdata dell_device_table[] = {
+ {
+ .ident = "Dell laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_CHASSIS_TYPE, "8"),
+ },
+ },
+ { }
+};
+
+static void parse_da_table(const struct dmi_header *dm)
+{
+ /* Final token is a terminator, so we don't want to copy it */
+ int tokens = (dm->length-11)/sizeof(struct calling_interface_token)-1;
+ struct calling_interface_structure *table =
+ container_of(dm, struct calling_interface_structure, header);
+
+ /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least
+ 6 bytes of entry */
+
+ if (dm->length < 17)
+ return;
+
+ da_command_address = table->cmdIOAddress;
+ da_command_code = table->cmdIOCode;
+
+ da_tokens = krealloc(da_tokens, (da_num_tokens + tokens) *
+ sizeof(struct calling_interface_token),
+ GFP_KERNEL);
+
+ if (!da_tokens)
+ return;
+
+ memcpy(da_tokens+da_num_tokens, table->tokens,
+ sizeof(struct calling_interface_token) * tokens);
+
+ da_num_tokens += tokens;
+}
+
+static void find_tokens(const struct dmi_header *dm)
+{
+ switch (dm->type) {
+ case 0xd4: /* Indexed IO */
+ break;
+ case 0xd5: /* Protected Area Type 1 */
+ break;
+ case 0xd6: /* Protected Area Type 2 */
+ break;
+ case 0xda: /* Calling interface */
+ parse_da_table(dm);
+ break;
+ }
+}
+
+static int find_token_location(int tokenid)
+{
+ int i;
+ for (i = 0; i < da_num_tokens; i++) {
+ if (da_tokens[i].tokenID == tokenid)
+ return da_tokens[i].location;
+ }
+
+ return -1;
+}
+
+static struct calling_interface_buffer *
+dell_send_request(struct calling_interface_buffer *buffer, int class,
+ int select)
+{
+ struct smi_cmd command;
+
+ command.magic = SMI_CMD_MAGIC;
+ command.command_address = da_command_address;
+ command.command_code = da_command_code;
+ command.ebx = virt_to_phys(buffer);
+ command.ecx = 0x42534931;
+
+ buffer->class = class;
+ buffer->select = select;
+
+ dcdbas_smi_request(&command);
+
+ return buffer;
+}
+
+/* Derived from information in DellWirelessCtl.cpp:
+ Class 17, select 11 is radio control. It returns an array of 32-bit values.
+
+ result[0]: return code
+ result[1]:
+ Bit 0: Hardware switch supported
+ Bit 1: Wifi locator supported
+ Bit 2: Wifi is supported
+ Bit 3: Bluetooth is supported
+ Bit 4: WWAN is supported
+ Bit 5: Wireless keyboard supported
+ Bits 6-7: Reserved
+ Bit 8: Wifi is installed
+ Bit 9: Bluetooth is installed
+ Bit 10: WWAN is installed
+ Bits 11-15: Reserved
+ Bit 16: Hardware switch is on
+ Bit 17: Wifi is blocked
+ Bit 18: Bluetooth is blocked
+ Bit 19: WWAN is blocked
+ Bits 20-31: Reserved
+ result[2]: NVRAM size in bytes
+ result[3]: NVRAM format version number
+*/
+
+static int dell_rfkill_set(int radio, enum rfkill_state state)
+{
+ struct calling_interface_buffer buffer;
+ int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1;
+
+ memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+ buffer.input[0] = (1 | (radio<<8) | (disable << 16));
+ dell_send_request(&buffer, 17, 11);
+
+ return 0;
+}
+
+static int dell_wifi_set(void *data, enum rfkill_state state)
+{
+ return dell_rfkill_set(1, state);
+}
+
+static int dell_bluetooth_set(void *data, enum rfkill_state state)
+{
+ return dell_rfkill_set(2, state);
+}
+
+static int dell_wwan_set(void *data, enum rfkill_state state)
+{
+ return dell_rfkill_set(3, state);
+}
+
+static int dell_rfkill_get(int bit, enum rfkill_state *state)
+{
+ struct calling_interface_buffer buffer;
+ int status;
+ int new_state = RFKILL_STATE_HARD_BLOCKED;
+
+ memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+ dell_send_request(&buffer, 17, 11);
+ status = buffer.output[1];
+
+ if (status & (1<<16))
+ new_state = RFKILL_STATE_SOFT_BLOCKED;
+
+ if (status & (1<<bit))
+ *state = new_state;
+ else
+ *state = RFKILL_STATE_UNBLOCKED;
+
+ return 0;
+}
+
+static int dell_wifi_get(void *data, enum rfkill_state *state)
+{
+ return dell_rfkill_get(17, state);
+}
+
+static int dell_bluetooth_get(void *data, enum rfkill_state *state)
+{
+ return dell_rfkill_get(18, state);
+}
+
+static int dell_wwan_get(void *data, enum rfkill_state *state)
+{
+ return dell_rfkill_get(19, state);
+}
+
+static int dell_setup_rfkill(void)
+{
+ struct calling_interface_buffer buffer;
+ int status;
+ int ret;
+
+ memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+ dell_send_request(&buffer, 17, 11);
+ status = buffer.output[1];
+
+ if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
+ wifi_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WLAN);
+ if (!wifi_rfkill)
+ goto err_wifi;
+ wifi_rfkill->name = "dell-wifi";
+ wifi_rfkill->toggle_radio = dell_wifi_set;
+ wifi_rfkill->get_state = dell_wifi_get;
+ ret = rfkill_register(wifi_rfkill);
+ if (ret)
+ goto err_wifi;
+ }
+
+ if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) {
+ bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH);
+ if (!bluetooth_rfkill)
+ goto err_bluetooth;
+ bluetooth_rfkill->name = "dell-bluetooth";
+ bluetooth_rfkill->toggle_radio = dell_bluetooth_set;
+ bluetooth_rfkill->get_state = dell_bluetooth_get;
+ ret = rfkill_register(bluetooth_rfkill);
+ if (ret)
+ goto err_bluetooth;
+ }
+
+ if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) {
+ wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN);
+ if (!wwan_rfkill)
+ goto err_wwan;
+ wwan_rfkill->name = "dell-wwan";
+ wwan_rfkill->toggle_radio = dell_wwan_set;
+ wwan_rfkill->get_state = dell_wwan_get;
+ ret = rfkill_register(wwan_rfkill);
+ if (ret)
+ goto err_wwan;
+ }
+
+ return 0;
+err_wwan:
+ if (wwan_rfkill)
+ rfkill_free(wwan_rfkill);
+ if (bluetooth_rfkill) {
+ rfkill_unregister(bluetooth_rfkill);
+ bluetooth_rfkill = NULL;
+ }
+err_bluetooth:
+ if (bluetooth_rfkill)
+ rfkill_free(bluetooth_rfkill);
+ if (wifi_rfkill) {
+ rfkill_unregister(wifi_rfkill);
+ wifi_rfkill = NULL;
+ }
+err_wifi:
+ if (wifi_rfkill)
+ rfkill_free(wifi_rfkill);
+
+ return ret;
+}
+
+static int dell_send_intensity(struct backlight_device *bd)
+{
+ struct calling_interface_buffer buffer;
+
+ memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+ buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
+ buffer.input[1] = bd->props.brightness;
+
+ if (buffer.input[0] == -1)
+ return -ENODEV;
+
+ if (power_supply_is_system_supplied() > 0)
+ dell_send_request(&buffer, 1, 2);
+ else
+ dell_send_request(&buffer, 1, 1);
+
+ return 0;
+}
+
+static int dell_get_intensity(struct backlight_device *bd)
+{
+ struct calling_interface_buffer buffer;
+
+ memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+ buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
+
+ if (buffer.input[0] == -1)
+ return -ENODEV;
+
+ if (power_supply_is_system_supplied() > 0)
+ dell_send_request(&buffer, 0, 2);
+ else
+ dell_send_request(&buffer, 0, 1);
+
+ return buffer.output[1];
+}
+
+static struct backlight_ops dell_ops = {
+ .get_brightness = dell_get_intensity,
+ .update_status = dell_send_intensity,
+};
+
+static int __init dell_init(void)
+{
+ struct calling_interface_buffer buffer;
+ int max_intensity = 0;
+ int ret;
+
+ if (!dmi_check_system(dell_device_table))
+ return -ENODEV;
+
+ dmi_walk(find_tokens);
+
+ if (!da_tokens) {
+ printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n");
+ return -ENODEV;
+ }
+
+ ret = dell_setup_rfkill();
+
+ if (ret) {
+ printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n");
+ goto out;
+ }
+
+#ifdef CONFIG_ACPI
+ /* In the event of an ACPI backlight being available, don't
+ * register the platform controller.
+ */
+ if (acpi_video_backlight_support())
+ return 0;
+#endif
+
+ memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+ buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
+
+ if (buffer.input[0] != -1) {
+ dell_send_request(&buffer, 0, 2);
+ max_intensity = buffer.output[3];
+ }
+
+ if (max_intensity) {
+ dell_backlight_device = backlight_device_register(
+ "dell_backlight",
+ NULL, NULL,
+ &dell_ops);
+
+ if (IS_ERR(dell_backlight_device)) {
+ ret = PTR_ERR(dell_backlight_device);
+ dell_backlight_device = NULL;
+ goto out;
+ }
+
+ dell_backlight_device->props.max_brightness = max_intensity;
+ dell_backlight_device->props.brightness =
+ dell_get_intensity(dell_backlight_device);
+ backlight_update_status(dell_backlight_device);
+ }
+
+ return 0;
+out:
+ if (wifi_rfkill)
+ rfkill_unregister(wifi_rfkill);
+ if (bluetooth_rfkill)
+ rfkill_unregister(bluetooth_rfkill);
+ if (wwan_rfkill)
+ rfkill_unregister(wwan_rfkill);
+ kfree(da_tokens);
+ return ret;
+}
+
+static void __exit dell_exit(void)
+{
+ backlight_device_unregister(dell_backlight_device);
+ if (wifi_rfkill)
+ rfkill_unregister(wifi_rfkill);
+ if (bluetooth_rfkill)
+ rfkill_unregister(bluetooth_rfkill);
+ if (wwan_rfkill)
+ rfkill_unregister(wwan_rfkill);
+}
+
+module_init(dell_init);
+module_exit(dell_exit);
+
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
+MODULE_DESCRIPTION("Dell laptop driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*");
};
static const char *cm_getv[] = {
- "WLDG", NULL, NULL, NULL,
+ "WLDG", "BTHG", NULL, NULL,
"CAMG", NULL, NULL, NULL,
NULL, "PBLG", NULL, NULL,
"CFVG", NULL, NULL, NULL,
};
static const char *cm_setv[] = {
- "WLDS", NULL, NULL, NULL,
+ "WLDS", "BTHS", NULL, NULL,
"CAMS", NULL, NULL, NULL,
"SDSP", "PBLS", "HDPS", NULL,
"CFVS", NULL, NULL, NULL,
#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: Power button is handled as a generic feature */
#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: Sleep button is handled as a generic feature, or not present */
#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: RTC wakeup stat not in fixed register space */
-#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup stat not possible from S4 */
+#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup possible from S4 */
#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: tmr_val is 32 bits 0=24-bits */
#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: Docking supported */
#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: System reset via the FADT RESET_REG supported */
static int __kprobes check_safety(void)
{
int ret = 0;
-#if defined(CONFIG_PREEMPT) && defined(CONFIG_PM)
+#if defined(CONFIG_PREEMPT) && defined(CONFIG_FREEZER)
ret = freeze_processes();
if (ret == 0) {
struct task_struct *p, *q;
endif
obj-y := main.o
-obj-$(CONFIG_PM_SLEEP) += process.o console.o
+obj-$(CONFIG_PM_SLEEP) += console.o
+obj-$(CONFIG_FREEZER) += process.o
obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o
obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
projects / cascardo / linux.git / commitdiff