'policyX/throttle_stats' directory and all the attributes are same as
the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and
attributes which give the frequency throttle information of the chip.
+
+What: /sys/devices/system/cpu/cpuX/regs/
+ /sys/devices/system/cpu/cpuX/regs/identification/
+ /sys/devices/system/cpu/cpuX/regs/identification/midr_el1
+ /sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
+Date: June 2016
+Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
+Description: AArch64 CPU registers
+ 'identification' directory exposes the CPU ID registers for
+ identifying model and revision of the CPU.
-- Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
- -- Recommended: BERT, EINJ, ERST, HEST, SSDT
+ -- Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
- -- Optional: BGRT, CPEP, CSRT, DRTM, ECDT, FACS, FPDT, MCHI, MPST,
- MSCT, RASF, SBST, SLIT, SPMI, SRAT, TCPA, TPM2, UEFI
-
- -- Not supported: BOOT, DBG2, DBGP, DMAR, ETDT, HPET, IBFT, IVRS,
- LPIT, MSDM, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
+ -- Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
+ MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, STAO,
+ TCPA, TPM2, UEFI, XENV
+ -- Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
+ MSDM, OEMx, PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
Table Usage for ARMv8 Linux
----- ----------------------------------------------------------------
DBG2 Signature Reserved (signature == "DBG2")
== DeBuG port table 2 ==
- Microsoft only table, will not be supported.
+ License has changed and should be usable. Optional if used instead
+ of earlycon=<device> on the command line.
DBGP Signature Reserved (signature == "DBGP")
== DeBuG Port table ==
HEST Section 18.3.2 (signature == "HEST")
== Hardware Error Source Table ==
- Until further error source types are defined, use only types 6 (AER
- Root Port), 7 (AER Endpoint), 8 (AER Bridge), or 9 (Generic Hardware
- Error Source). Firmware first error handling is possible if and only
- if Trusted Firmware is being used on arm64.
+ ARM-specific error sources have been defined; please use those or the
+ PCI types such as type 6 (AER Root Port), 7 (AER Endpoint), or 8 (AER
+ Bridge), or use type 9 (Generic Hardware Error Source). Firmware first
+ error handling is possible if and only if Trusted Firmware is being
+ used on arm64.
Must be supplied if RAS support is provided by the platform. It
is recommended this table be supplied.
== iSCSI Boot Firmware Table ==
Microsoft defined table, support TBD.
+IORT Signature Reserved (signature == "IORT")
+ == Input Output Remapping Table ==
+ arm64 only table, required in order to describe IO topology, SMMUs,
+ and GIC ITSs, and how those various components are connected together,
+ such as identifying which components are behind which SMMUs/ITSs.
+ This table will only be required on certain SBSA platforms (e.g.,
+ when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
+ remains optional.
+
IVRS Signature Reserved (signature == "IVRS")
== I/O Virtualization Reporting Structure ==
x86_64 (AMD) only table, will not be supported.
LPIT Signature Reserved (signature == "LPIT")
== Low Power Idle Table ==
- x86 only table as of ACPI 5.1; future versions have been adapted for
- use with ARM and will be recommended in order to support ACPI power
- management.
+ x86 only table as of ACPI 5.1; starting with ACPI 6.0, processor
+ descriptions and power states on ARM platforms should use the DSDT
+ and define processor container devices (_HID ACPI0010, Section 8.4,
+ and more specifically 8.4.3 and and 8.4.4).
MADT Section 5.2.12 (signature == "APIC")
== Multiple APIC Description Table ==
Required for arm64. Only the GIC interrupt controller structures
- should be used (types 0xA - 0xE).
+ should be used (types 0xA - 0xF).
MCFG Signature Reserved (signature == "MCFG")
== Memory-mapped ConFiGuration space ==
== Memory Power State Table ==
Optional, not currently supported.
+MSCT Section 5.2.19 (signature == "MSCT")
+ == Maximum System Characteristic Table ==
+ Optional, not currently supported.
+
MSDM Signature Reserved (signature == "MSDM")
== Microsoft Data Management table ==
Microsoft only table, will not be supported.
-MSCT Section 5.2.19 (signature == "MSCT")
- == Maximum System Characteristic Table ==
+NFIT Section 5.2.25 (signature == "NFIT")
+ == NVDIMM Firmware Interface Table ==
+ Optional, not currently supported.
+
+OEMx Signature of "OEMx" only
+ == OEM Specific Tables ==
+ All tables starting with a signature of "OEM" are reserved for OEM
+ use. Since these are not meant to be of general use but are limited
+ to very specific end users, they are not recommended for use and are
+ not supported by the kernel for arm64.
+
+PCCT Section 14.1 (signature == "PCCT)
+ == Platform Communications Channel Table ==
+ Recommend for use on arm64; use of PCC is recommended when using CPPC
+ to control performance and power for platform processors.
+
+PMTT Section 5.2.21.12 (signature == "PMTT")
+ == Platform Memory Topology Table ==
Optional, not currently supported.
+PSDT Section 5.2.11.3 (signature == "PSDT")
+ == Persistent System Description Table ==
+ Obsolete table, will not be supported.
+
RASF Section 5.2.20 (signature == "RASF")
== RAS Feature table ==
Optional, not currently supported.
RSDT Section 5.2.7 (signature == "RSDT")
== Root System Description Table ==
Since this table can only provide 32-bit addresses, it is deprecated
- on arm64, and will not be used.
+ on arm64, and will not be used. If provided, it will be ignored.
SBST Section 5.2.14 (signature == "SBST")
== Smart Battery Subsystem Table ==
SRAT Section 5.2.16 (signature == "SRAT")
== System Resource Affinity Table ==
Optional, but if used, only the GICC Affinity structures are read.
- To support NUMA, this table is required.
+ To support arm64 NUMA, this table is required.
SSDT Section 5.2.11.2 (signature == "SSDT")
== Secondary System Description Table ==
These tables are optional, however. ACPI tables should contain only
one DSDT but can contain many SSDTs.
+STAO Signature Reserved (signature == "STAO")
+ == _STA Override table ==
+ Optional, but only necessary in virtualized environments in order to
+ hide devices from guest OSs.
+
TCPA Signature Reserved (signature == "TCPA")
== Trusted Computing Platform Alliance table ==
Optional, not currently supported, and may need changes to fully
== Windows Platform Binary Table ==
Microsoft only table, will not be supported.
+XENV Signature Reserved (signature == "XENV")
+ == Xen project table ==
+ Optional, used only by Xen at present.
+
XSDT Section 5.2.8 (signature == "XSDT")
== eXtended System Description Table ==
Required for arm64.
ACPI Objects
------------
-The expectations on individual ACPI objects are discussed in the list that
-follows:
+The expectations on individual ACPI objects that are likely to be used are
+shown in the list that follows; any object not explicitly mentioned below
+should be used as needed for a particular platform or particular subsystem,
+such as power management or PCI.
Name Section Usage for ARMv8 Linux
---- ------------ -------------------------------------------------
-_ADR 6.1.1 Use as needed.
-
-_BBN 6.5.5 Use as needed; PCI-specific.
+_CCA 6.2.17 This method must be defined for all bus masters
+ on arm64 -- there are no assumptions made about
+ whether such devices are cache coherent or not.
+ The _CCA value is inherited by all descendants of
+ these devices so it does not need to be repeated.
+ Without _CCA on arm64, the kernel does not know what
+ to do about setting up DMA for the device.
-_BDN 6.5.3 Optional; not likely to be used on arm64.
+ NB: this method provides default cache coherency
+ attributes; the presence of an SMMU can be used to
+ modify that, however. For example, a master could
+ default to non-coherent, but be made coherent with
+ the appropriate SMMU configuration (see Table 17 of
+ the IORT specification, ARM Document DEN 0049B).
-_CCA 6.2.17 This method should be defined for all bus masters
- on arm64. While cache coherency is assumed, making
- it explicit ensures the kernel will set up DMA as
- it should.
+_CID 6.1.2 Use as needed, see also _HID.
-_CDM 6.2.1 Optional, to be used only for processor devices.
+_CLS 6.1.3 Use as needed, see also _HID.
-_CID 6.1.2 Use as needed.
-
-_CLS 6.1.3 Use as needed.
+_CPC 8.4.7.1 Use as needed, power management specific. CPPC is
+ recommended on arm64.
_CRS 6.2.2 Required on arm64.
-_DCK 6.5.2 Optional; not likely to be used on arm64.
+_CSD 8.4.2.2 Use as needed, used only in conjunction with _CST.
+
+_CST 8.4.2.1 Low power idle states (8.4.4) are recommended instead
+ of C-states.
_DDN 6.1.4 This field can be used for a device name. However,
it is meant for DOS device names (e.g., COM1), so be
careful of its use across OSes.
-_DEP 6.5.8 Use as needed.
-
-_DIS 6.2.3 Optional, for power management use.
-
-_DLM 5.7.5 Optional.
-
-_DMA 6.2.4 Optional.
-
_DSD 6.2.5 To be used with caution. If this object is used, try
to use it within the constraints already defined by the
Device Properties UUID. Only in rare circumstances
with the UEFI Forum; this may cause some iteration as
more than one OS will be registering entries.
-_DSM Do not use this method. It is not standardized, the
+_DSM 9.1.1 Do not use this method. It is not standardized, the
return values are not well documented, and it is
currently a frequent source of error.
-_DSW 7.2.1 Use as needed; power management specific.
-
-_EDL 6.3.1 Optional.
-
-_EJD 6.3.2 Optional.
-
-_EJx 6.3.3 Optional.
-
-_FIX 6.2.7 x86 specific, not used on arm64.
-
\_GL 5.7.1 This object is not to be used in hardware reduced
mode, and therefore should not be used on arm64.
\_GPE 5.3.1 This namespace is for x86 use only. Do not use it
on arm64.
-_GSB 6.2.7 Optional.
-
-_HID 6.1.5 Use as needed. This is the primary object to use in
- device probing, though _CID and _CLS may also be used.
-
-_HPP 6.2.8 Optional, PCI specific.
-
-_HPX 6.2.9 Optional, PCI specific.
-
-_HRV 6.1.6 Optional, use as needed to clarify device behavior; in
- some cases, this may be easier to use than _DSD.
+_HID 6.1.5 This is the primary object to use in device probing,
+ though _CID and _CLS may also be used.
_INI 6.5.1 Not required, but can be useful in setting up devices
when UEFI leaves them in a state that may not be what
the driver expects before it starts probing.
-_IRC 7.2.15 Use as needed; power management specific.
-
-_LCK 6.3.4 Optional.
-
-_MAT 6.2.10 Optional; see also the MADT.
+_LPI 8.4.4.3 Recommended for use with processor definitions (_HID
+ ACPI0010) on arm64. See also _RDI.
-_MLS 6.1.7 Optional, but highly recommended for use in
- internationalization.
+_MLS 6.1.7 Highly recommended for use in internationalization.
-_OFF 7.1.2 It is recommended to define this method for any device
+_OFF 7.2.2 It is recommended to define this method for any device
that can be turned on or off.
-_ON 7.1.3 It is recommended to define this method for any device
+_ON 7.2.3 It is recommended to define this method for any device
that can be turned on or off.
\_OS 5.7.3 This method will return "Linux" by default (this is
by the kernel community, then register it with the
UEFI Forum.
-\_OSI 5.7.2 Deprecated on ARM64. Any invocation of this method
- will print a warning on the console and return false.
- That is, as far as ACPI firmware is concerned, _OSI
- cannot be used to determine what sort of system is
- being used or what functionality is provided. The
- _OSC method is to be used instead.
-
-_OST 6.3.5 Optional.
+\_OSI 5.7.2 Deprecated on ARM64. As far as ACPI firmware is
+ concerned, _OSI is not to be used to determine what
+ sort of system is being used or what functionality
+ is provided. The _OSC method is to be used instead.
_PDC 8.4.1 Deprecated, do not use on arm64.
\_PIC 5.8.1 The method should not be used. On arm64, the only
interrupt model available is GIC.
-_PLD 6.1.8 Optional.
-
\_PR 5.3.1 This namespace is for x86 use only on legacy systems.
Do not use it on arm64.
-_PRS 6.2.12 Optional.
-
_PRT 6.2.13 Required as part of the definition of all PCI root
devices.
-_PRW 7.2.13 Use as needed; power management specific.
-
-_PRx 7.2.8-11 Use as needed; power management specific. If _PR0 is
+_PRx 7.3.8-11 Use as needed; power management specific. If _PR0 is
defined, _PR3 must also be defined.
-_PSC 7.2.6 Use as needed; power management specific.
-
-_PSE 7.2.7 Use as needed; power management specific.
-
-_PSW 7.2.14 Use as needed; power management specific.
-
-_PSx 7.2.2-5 Use as needed; power management specific. If _PS0 is
+_PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is
defined, _PS3 must also be defined. If clocks or
regulators need adjusting to be consistent with power
usage, change them in these methods.
-\_PTS 7.3.1 Use as needed; power management specific.
-
-_PXM 6.2.14 Optional.
-
-_REG 6.5.4 Use as needed.
+_RDI 8.4.4.4 Recommended for use with processor definitions (_HID
+ ACPI0010) on arm64. This should only be used in
+ conjunction with _LPI.
\_REV 5.7.4 Always returns the latest version of ACPI supported.
-_RMV 6.3.6 Optional.
-
\_SB 5.3.1 Required on arm64; all devices must be defined in this
namespace.
-_SEG 6.5.6 Use as needed; PCI-specific.
-
-\_SI 5.3.1, Optional.
- 9.1
-
-_SLI 6.2.15 Optional; recommended when SLIT table is in use.
+_SLI 6.2.15 Use is recommended when SLIT table is in use.
_STA 6.3.7, It is recommended to define this method for any device
- 7.1.4 that can be turned on or off.
+ 7.2.4 that can be turned on or off. See also the STAO table
+ that provides overrides to hide devices in virtualized
+ environments.
-_SRS 6.2.16 Optional; see also _PRS.
+_SRS 6.2.16 Use as needed; see also _PRS.
_STR 6.1.10 Recommended for conveying device names to end users;
this is preferred over using _DDN.
_SUB 6.1.9 Use as needed; _HID or _CID are preferred.
-_SUN 6.1.11 Optional.
-
-\_Sx 7.3.2 Use as needed; power management specific.
-
-_SxD 7.2.16-19 Use as needed; power management specific.
-
-_SxW 7.2.20-24 Use as needed; power management specific.
+_SUN 6.1.11 Use as needed, but recommended.
-_SWS 7.3.3 Use as needed; power management specific; this may
+_SWS 7.4.3 Use as needed; power management specific; this may
require specification changes for use on arm64.
-\_TTS 7.3.4 Use as needed; power management specific.
-
-\_TZ 5.3.1 Optional.
-
_UID 6.1.12 Recommended for distinguishing devices of the same
class; define it if at all possible.
-\_WAK 7.3.5 Use as needed; power management specific.
+
ACPI Event Model
----------------
Do not use GPE block devices; these are not supported in the hardware reduced
profile used by arm64. Since there are no GPE blocks defined for use on ARM
-platforms, GPIO-signaled interrupts should be used for creating system events.
+platforms, ACPI events must be signaled differently.
+
+There are two options: GPIO-signaled interrupts (Section 5.6.5), and
+interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a
+new feature in the ACPI 6.1 specification. Either -- or both -- can be used
+on a given platform, and which to use may be dependent of limitations in any
+given SoC. If possible, interrupt-signaled events are recommended.
ACPI Processor Control
----------------------
-Section 8 of the ACPI specification is currently undergoing change that
-should be completed in the 6.0 version of the specification. Processor
-performance control will be handled differently for arm64 at that point
-in time. Processor aggregator devices (section 8.5) will not be used,
-for example, but another similar mechanism instead.
-
-While UEFI constrains what we can say until the release of 6.0, it is
-recommended that CPPC (8.4.5) be used as the primary model. This will
-still be useful into the future. C-states and P-states will still be
-provided, but most of the current design work appears to favor CPPC.
+Section 8 of the ACPI specification changed significantly in version 6.0.
+Processors should now be defined as Device objects with _HID ACPI0007; do
+not use the deprecated Processor statement in ASL. All multiprocessor systems
+should also define a hierarchy of processors, done with Processor Container
+Devices (see Section 8.4.3.1, _HID ACPI0010); do not use processor aggregator
+devices (Section 8.5) to describe processor topology. Section 8.4 of the
+specification describes the semantics of these object definitions and how
+they interrelate.
+
+Most importantly, the processor hierarchy defined also defines the low power
+idle states that are available to the platform, along with the rules for
+determining which processors can be turned on or off and the circumstances
+that control that. Without this information, the processors will run in
+whatever power state they were left in by UEFI.
+
+Note too, that the processor Device objects defined and the entries in the
+MADT for GICs are expected to be in synchronization. The _UID of the Device
+object must correspond to processor IDs used in the MADT.
+
+It is recommended that CPPC (8.4.5) be used as the primary model for processor
+performance control on arm64. C-states and P-states may become available at
+some point in the future, but most current design work appears to favor CPPC.
Further, it is essential that the ARMv8 SoC provide a fully functional
implementation of PSCI; this will be the only mechanism supported by ACPI
-to control CPU power state (including secondary CPU booting).
-
-More details will be provided on the release of the ACPI 6.0 specification.
+to control CPU power state. Booting of secondary CPUs using the ACPI
+parking protocol is possible, but discouraged, since only PSCI is supported
+for ARM servers.
ACPI System Address Map Interfaces
attention.
Since there is no direct equivalent of the x86 SCI or NMI, arm64 handles
-these slightly differently. The SCI is handled as a normal GPIO-signaled
-interrupt; given that these are corrected (or correctable) errors being
-reported, this is sufficient. The NMI is emulated as the highest priority
-GPIO-signaled interrupt possible. This implies some caution must be used
-since there could be interrupts at higher privilege levels or even interrupts
-at the same priority as the emulated NMI. In Linux, this should not be the
-case but one should be aware it could happen.
+these slightly differently. The SCI is handled as a high priority interrupt;
+given that these are corrected (or correctable) errors being reported, this
+is sufficient. The NMI is emulated as the highest priority interrupt
+possible. This implies some caution must be used since there could be
+interrupts at higher privilege levels or even interrupts at the same priority
+as the emulated NMI. In Linux, this should not be the case but one should
+be aware it could happen.
ACPI Objects Not Supported on ARM64
-----------------------------------
While this may change in the future, there are several classes of objects
that can be defined, but are not currently of general interest to ARM servers.
+Some of these objects have x86 equivalents, and may actually make sense in ARM
+servers. However, there is either no hardware available at present, or there
+may not even be a non-ARM implementation yet. Hence, they are not currently
+supported.
-These are not supported:
+The following classes of objects are not supported:
-- Section 9.2: ambient light sensor devices
-- Section 9.18: time and alarm devices (see 9.15)
-
-ACPI Objects Not Yet Implemented
---------------------------------
-While these objects have x86 equivalents, and they do make some sense in ARM
-servers, there is either no hardware available at present, or in some cases
-there may not yet be a non-ARM implementation. Hence, they are currently not
-implemented though that may change in the future.
-
-Not yet implemented are:
-
-- Section 10: power source and power meter devices
-- Section 11: thermal management
-- Section 13: SMBus interfaces
- -- Section 17: NUMA support (prototypes have been submitted for
- review)
+
+This also means that there is no support for the following objects:
+
+Name Section Name Section
+---- ------------ ---- ------------
+_ALC 9.3.4 _FDM 9.10.3
+_ALI 9.3.2 _FIX 6.2.7
+_ALP 9.3.6 _GAI 10.4.5
+_ALR 9.3.5 _GHL 10.4.7
+_ALT 9.3.3 _GTM 9.9.2.1.1
+_BCT 10.2.2.10 _LID 9.5.1
+_BDN 6.5.3 _PAI 10.4.4
+_BIF 10.2.2.1 _PCL 10.3.2
+_BIX 10.2.2.1 _PIF 10.3.3
+_BLT 9.2.3 _PMC 10.4.1
+_BMA 10.2.2.4 _PMD 10.4.8
+_BMC 10.2.2.12 _PMM 10.4.3
+_BMD 10.2.2.11 _PRL 10.3.4
+_BMS 10.2.2.5 _PSR 10.3.1
+_BST 10.2.2.6 _PTP 10.4.2
+_BTH 10.2.2.7 _SBS 10.1.3
+_BTM 10.2.2.9 _SHL 10.4.6
+_BTP 10.2.2.8 _STM 9.9.2.1.1
+_DCK 6.5.2 _UPD 9.16.1
+_EC 12.12 _UPP 9.16.2
+_FDE 9.10.1 _WPC 10.5.2
+_FDI 9.10.2 _WPP 10.5.3
+
The short form of the rationale for ACPI on ARM is:
--- ACPI’s bytecode (AML) allows the platform to encode hardware behavior,
+-- ACPI’s byte code (AML) allows the platform to encode hardware behavior,
while DT explicitly does not support this. For hardware vendors, being
able to encode behavior is a key tool used in supporting operating
system releases on new hardware.
-- The new ACPI governance process works well and Linux is now at the same
table as hardware vendors and other OS vendors. In fact, there is no
- longer any reason to feel that ACPI is only belongs to Windows or that
+ longer any reason to feel that ACPI only belongs to Windows or that
Linux is in any way secondary to Microsoft in this arena. The move of
ACPI governance into the UEFI forum has significantly opened up the
specification development process, and currently, a large portion of the
- changes being made to ACPI is being driven by Linux.
+ changes being made to ACPI are being driven by Linux.
Key to the use of ACPI is the support model. For servers in general, the
responsibility for hardware behaviour cannot solely be the domain of the
exclusive with DT support at compile time.
At boot time the kernel will only use one description method depending on
-parameters passed from the bootloader (including kernel bootargs).
+parameters passed from the boot loader (including kernel bootargs).
Regardless of whether DT or ACPI is used, the kernel must always be capable
of booting with either scheme (in kernels with both schemes enabled at compile
(Fixed ACPI Description Table). Any 32-bit address fields in the FADT will
be ignored on arm64.
-Hardware reduced mode (see Section 4.1 of the ACPI 5.1 specification) will
+Hardware reduced mode (see Section 4.1 of the ACPI 6.1 specification) will
be enforced by the ACPI core on arm64. Doing so allows the ACPI core to
run less complex code since it no longer has to provide support for legacy
hardware from other architectures. Any fields that are not to be used for
For the ACPI core to operate properly, and in turn provide the information
the kernel needs to configure devices, it expects to find the following
-tables (all section numbers refer to the ACPI 5.1 specfication):
+tables (all section numbers refer to the ACPI 6.1 specification):
-- RSDP (Root System Description Pointer), section 5.2.5
-- If PCI is supported, the MCFG (Memory mapped ConFiGuration
Table), section 5.2.6, specifically Table 5-31.
+ -- If booting without a console=<device> kernel parameter is
+ supported, the SPCR (Serial Port Console Redirection table),
+ section 5.2.6, specifically Table 5-31.
+
+ -- If necessary to describe the I/O topology, SMMUs and GIC ITSs,
+ the IORT (Input Output Remapping Table, section 5.2.6, specifically
+ Table 5-31).
+
+ -- If NUMA is supported, the SRAT (System Resource Affinity Table)
+ and SLIT (System Locality distance Information Table), sections
+ 5.2.16 and 5.2.17, respectively.
+
If the above tables are not all present, the kernel may or may not be
able to boot properly since it may not be able to configure all of the
-devices available.
+devices available. This list of tables is not meant to be all inclusive;
+in some environments other tables may be needed (e.g., any of the APEI
+tables from section 18) to support specific functionality.
ACPI Detection
Recommendations" section.
In non-driver code, if the presence of ACPI needs to be detected at
-runtime, then check the value of acpi_disabled. If CONFIG_ACPI is not
+run time, then check the value of acpi_disabled. If CONFIG_ACPI is not
set, acpi_disabled will always be 1.
then retrieve the value of the property by evaluating the KEY0 object.
However, using Name() this way has multiple problems: (1) ACPI limits
names ("KEY0") to four characters unlike DT; (2) there is no industry
-wide registry that maintains a list of names, minimzing re-use; (3)
+wide registry that maintains a list of names, minimizing re-use; (3)
there is also no registry for the definition of property values ("value0"),
again making re-use difficult; and (4) how does one maintain backward
compatibility as new hardware comes out? The _DSD method was created
version 5.1 was released and version 6.0 substantially completed, with most of
the changes being driven by ARM-specific requirements. Proposed changes are
presented and discussed in the ASWG (ACPI Specification Working Group) which
-is a part of the UEFI Forum.
+is a part of the UEFI Forum. The current version of the ACPI specification
+is 6.1 release in January 2016.
Participation in this group is open to all UEFI members. Please see
http://www.uefi.org/workinggroup for details on group membership.
as closely as possible, and to only implement functionality that complies with
the released standards from UEFI ASWG. As a practical matter, there will be
vendors that provide bad ACPI tables or violate the standards in some way.
-If this is because of errors, quirks and fixups may be necessary, but will
+If this is because of errors, quirks and fix-ups may be necessary, but will
be avoided if possible. If there are features missing from ACPI that preclude
it from being used on a platform, ECRs (Engineering Change Requests) should be
submitted to ASWG and go through the normal approval process; for those that
Software on ARM Platforms", dated 16 Aug 2014
[2] http://www.secretlab.ca/archives/151, 10 Jan 2015, Copyright (c) 2015,
- Linaro Ltd., written by Grant Likely. A copy of the verbatim text (apart
- from formatting) is also in Documentation/arm64/why_use_acpi.txt.
+ Linaro Ltd., written by Grant Likely.
[3] AMD ACPI for Seattle platform documentation:
http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf
When using a PPI, specifies a list of phandles to CPU
nodes corresponding to the set of CPUs which have
a PMU of this type signalling the PPI listed in the
- interrupts property.
+ interrupts property, unless this is already specified
+ by the PPI interrupt specifier itself (in which case
+ the interrupt-affinity property shouldn't be present).
This property should be present when there is more than
a single SPI.
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_GCOV_PROFILE_ALL
+ select ARCH_HAS_KCOV
select ARCH_HAS_SG_CHAIN
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_USE_CMPXCHG_LOCKREF
If in doubt, say N here.
+config KEXEC
+ depends on PM_SLEEP_SMP
+ select KEXEC_CORE
+ bool "kexec system call"
+ ---help---
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
config XEN_DOM0
def_bool y
depends on XEN
LDFLAGS_vmlinux :=-p --no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
-OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
ifneq ($(CONFIG_RELOCATABLE),)
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=$(boot)/dts
+# We need to generate vdso-offsets.h before compiling certain files in kernel/.
+# In order to do that, we should use the archprepare target, but we can't since
+# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
+# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
+# Therefore we need to generate the header after prepare0 has been made, hence
+# this hack.
+prepare: vdso_prepare
+vdso_prepare: prepare0
+ $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h
+
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
# Based on the ia64 boot/Makefile.
#
+OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+
targets := Image Image.gz
$(obj)/Image: vmlinux FORCE
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_CMA=y
CONFIG_XEN=y
+CONFIG_KEXEC=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
CONFIG_CPU_IDLE=y
generic-y += bug.h
generic-y += bugs.h
-generic-y += checksum.h
generic-y += clkdev.h
generic-y += cputime.h
generic-y += current.h
* The code that follows this macro will be assembled and linked as
* normal. There are no restrictions on this code.
*/
-.macro alternative_if_not cap, enable = 1
- .if \enable
+.macro alternative_if_not cap
.pushsection .altinstructions, "a"
altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f
.popsection
661:
- .endif
.endm
/*
* alternative sequence it is defined in (branches into an
* alternative sequence are not fixed up).
*/
-.macro alternative_else, enable = 1
- .if \enable
+.macro alternative_else
662: .pushsection .altinstr_replacement, "ax"
663:
- .endif
.endm
/*
* Complete an alternative code sequence.
*/
-.macro alternative_endif, enable = 1
- .if \enable
+.macro alternative_endif
664: .popsection
.org . - (664b-663b) + (662b-661b)
.org . - (662b-661b) + (664b-663b)
- .endif
.endm
#define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...) \
alternative_insn insn1, insn2, cap, IS_ENABLED(cfg)
+.macro user_alt, label, oldinstr, newinstr, cond
+9999: alternative_insn "\oldinstr", "\newinstr", \cond
+ _ASM_EXTABLE 9999b, \label
+.endm
/*
* Generate the assembly for UAO alternatives with exception table entries.
#define __ASM_ASSEMBLER_H
#include <asm/asm-offsets.h>
+#include <asm/cpufeature.h>
#include <asm/page.h>
#include <asm/pgtable-hwdef.h>
#include <asm/ptrace.h>
add \size, \kaddr, \size
sub \tmp2, \tmp1, #1
bic \kaddr, \kaddr, \tmp2
-9998: dc \op, \kaddr
+9998:
+ .if (\op == cvau || \op == cvac)
+alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
+ dc \op, \kaddr
+alternative_else
+ dc civac, \kaddr
+alternative_endif
+ .else
+ dc \op, \kaddr
+ .endif
add \kaddr, \kaddr, \tmp1
cmp \kaddr, \size
b.lo 9998b
--- /dev/null
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CHECKSUM_H
+#define __ASM_CHECKSUM_H
+
+#include <linux/types.h>
+
+static inline __sum16 csum_fold(__wsum csum)
+{
+ u32 sum = (__force u32)csum;
+ sum += (sum >> 16) | (sum << 16);
+ return ~(__force __sum16)(sum >> 16);
+}
+#define csum_fold csum_fold
+
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ __uint128_t tmp;
+ u64 sum;
+
+ tmp = *(const __uint128_t *)iph;
+ iph += 16;
+ ihl -= 4;
+ tmp += ((tmp >> 64) | (tmp << 64));
+ sum = tmp >> 64;
+ do {
+ sum += *(const u32 *)iph;
+ iph += 4;
+ } while (--ihl);
+
+ sum += ((sum >> 32) | (sum << 32));
+ return csum_fold(sum >> 32);
+}
+#define ip_fast_csum ip_fast_csum
+
+#include <asm-generic/checksum.h>
+
+#endif /* __ASM_CHECKSUM_H */
*/
struct cpuinfo_arm64 {
struct cpu cpu;
+ struct kobject kobj;
u32 reg_ctr;
u32 reg_cntfrq;
u32 reg_dczid;
u32 reg_midr;
+ u32 reg_revidr;
u64 reg_id_aa64dfr0;
u64 reg_id_aa64dfr1;
void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
const char *info);
+void enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps);
void check_local_cpu_errata(void);
+void __init enable_errata_workarounds(void);
void verify_local_cpu_errata(void);
void verify_local_cpu_capabilities(void);
#endif
int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
-
-#define efi_set_mapping_permissions efi_create_mapping
+int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
#define arch_efi_call_virt_setup() \
({ \
#define ESR_ELx_EC_SHIFT (26)
#define ESR_ELx_EC_MASK (UL(0x3F) << ESR_ELx_EC_SHIFT)
+#define ESR_ELx_EC(esr) (((esr) & ESR_ELx_EC_MASK) >> ESR_ELx_EC_SHIFT)
#define ESR_ELx_IL (UL(1) << 25)
#define ESR_ELx_ISS_MASK (ESR_ELx_IL - 1)
: : "r" (flags) : "memory"); \
} while (0)
-#define local_dbg_enable() asm("msr daifclr, #8" : : : "memory")
-#define local_dbg_disable() asm("msr daifset, #8" : : : "memory")
-
#endif
#endif
--- /dev/null
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ARM64_KEXEC_H
+#define _ARM64_KEXEC_H
+
+/* Maximum physical address we can use pages from */
+
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can reach in physical address mode */
+
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control code buffer */
+
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+#define KEXEC_ARCH KEXEC_ARCH_AARCH64
+
+#ifndef __ASSEMBLY__
+
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ *
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ */
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+ struct pt_regs *oldregs)
+{
+ /* Empty routine needed to avoid build errors. */
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
static inline u8 kvm_vcpu_trap_get_class(const struct kvm_vcpu *vcpu)
{
- return kvm_vcpu_get_hsr(vcpu) >> ESR_ELx_EC_SHIFT;
+ return ESR_ELx_EC(kvm_vcpu_get_hsr(vcpu));
}
static inline bool kvm_vcpu_trap_is_iabt(const struct kvm_vcpu *vcpu)
extern void init_mem_pgprot(void);
extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
unsigned long virt, phys_addr_t size,
- pgprot_t prot);
+ pgprot_t prot, bool allow_block_mappings);
extern void *fixmap_remap_fdt(phys_addr_t dt_phys);
#endif
void cpu_enable_pan(void *__unused);
void cpu_enable_uao(void *__unused);
+void cpu_enable_cache_maint_trap(void *__unused);
#endif /* __ASM_PROCESSOR_H */
--- /dev/null
+/*
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PTDUMP_H
+#define __ASM_PTDUMP_H
+
+#ifdef CONFIG_ARM64_PTDUMP
+
+#include <linux/mm_types.h>
+
+struct addr_marker {
+ unsigned long start_address;
+ char *name;
+};
+
+struct ptdump_info {
+ struct mm_struct *mm;
+ const struct addr_marker *markers;
+ unsigned long base_addr;
+ unsigned long max_addr;
+};
+
+int ptdump_register(struct ptdump_info *info, const char *name);
+
+#else
+static inline int ptdump_register(struct ptdump_info *info, const char *name)
+{
+ return 0;
+}
+#endif /* CONFIG_ARM64_PTDUMP */
+
+#endif /* __ASM_PTDUMP_H */
#define COMPAT_PSR_MODE_UND 0x0000001b
#define COMPAT_PSR_MODE_SYS 0x0000001f
#define COMPAT_PSR_T_BIT 0x00000020
-#define COMPAT_PSR_E_BIT 0x00000200
#define COMPAT_PSR_F_BIT 0x00000040
#define COMPAT_PSR_I_BIT 0x00000080
#define COMPAT_PSR_A_BIT 0x00000100
cpu_park_loop();
}
+/*
+ * If a secondary CPU enters the kernel but fails to come online,
+ * (e.g. due to mismatched features), and cannot exit the kernel,
+ * we increment cpus_stuck_in_kernel and leave the CPU in a
+ * quiesecent loop within the kernel text. The memory containing
+ * this loop must not be re-used for anything else as the 'stuck'
+ * core is executing it.
+ *
+ * This function is used to inhibit features like kexec and hibernate.
+ */
+bool cpus_are_stuck_in_kernel(void);
+
#endif /* ifndef __ASSEMBLY__ */
#endif /* ifndef __ASM_SMP_H */
SCTLR_ELx_SA | SCTLR_ELx_I)
/* SCTLR_EL1 specific flags. */
+#define SCTLR_EL1_UCI (1 << 26)
#define SCTLR_EL1_SPAN (1 << 23)
#define SCTLR_EL1_SED (1 << 8)
#define SCTLR_EL1_CP15BEN (1 << 5)
-
/* id_aa64isar0 */
#define ID_AA64ISAR0_RDM_SHIFT 28
#define ID_AA64ISAR0_ATOMICS_SHIFT 20
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
+
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
static inline int __in_irqentry_text(unsigned long ptr)
{
/*
* User space memory access functions
*/
+#include <linux/kasan-checks.h>
#include <linux/string.h>
#include <linux/thread_info.h>
-EFAULT; \
})
-extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __arch_copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __arch_copy_to_user(void __user *to, const void *from, unsigned long n);
extern unsigned long __must_check __copy_in_user(void __user *to, const void __user *from, unsigned long n);
extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+static inline unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ kasan_check_write(to, n);
+ return __arch_copy_from_user(to, from, n);
+}
+
+static inline unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ kasan_check_read(from, n);
+ return __arch_copy_to_user(to, from, n);
+}
+
static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
{
+ kasan_check_write(to, n);
+
if (access_ok(VERIFY_READ, from, n))
- n = __copy_from_user(to, from, n);
+ n = __arch_copy_from_user(to, from, n);
else /* security hole - plug it */
memset(to, 0, n);
return n;
static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
{
+ kasan_check_read(from, n);
+
if (access_ok(VERIFY_WRITE, to, n))
- n = __copy_to_user(to, from, n);
+ n = __arch_copy_to_user(to, from, n);
return n;
}
struct vdso_data {
__u64 cs_cycle_last; /* Timebase at clocksource init */
+ __u64 raw_time_sec; /* Raw time */
+ __u64 raw_time_nsec;
__u64 xtime_clock_sec; /* Kernel time */
__u64 xtime_clock_nsec;
__u64 xtime_coarse_sec; /* Coarse time */
__u64 wtm_clock_sec; /* Wall to monotonic time */
__u64 wtm_clock_nsec;
__u32 tb_seq_count; /* Timebase sequence counter */
- __u32 cs_mult; /* Clocksource multiplier */
- __u32 cs_shift; /* Clocksource shift */
+ /* cs_* members must be adjacent and in this order (ldp accesses) */
+ __u32 cs_mono_mult; /* NTP-adjusted clocksource multiplier */
+ __u32 cs_shift; /* Clocksource shift (mono = raw) */
+ __u32 cs_raw_mult; /* Raw clocksource multiplier */
__u32 tz_minuteswest; /* Whacky timezone stuff */
__u32 tz_dsttime;
__u32 use_syscall;
*/
#define HVC_SET_VECTORS 1
+/*
+ * HVC_SOFT_RESTART - CPU soft reset, used by the cpu_soft_restart routine.
+ */
+#define HVC_SOFT_RESTART 2
+
#define BOOT_CPU_MODE_EL1 (0xe11)
#define BOOT_CPU_MODE_EL2 (0xe12)
arm64-obj-$(CONFIG_PARAVIRT) += paravirt.o
arm64-obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
arm64-obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate-asm.o
+arm64-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o \
+ cpu-reset.o
obj-y += $(arm64-obj-y) vdso/ probes/
obj-m += $(arm64-obj-m)
head-y := head.o
extra-y += $(head-y) vmlinux.lds
-
-# vDSO - this must be built first to generate the symbol offsets
-$(call objectify,$(arm64-obj-y)): $(obj)/vdso/vdso-offsets.h
-$(obj)/vdso/vdso-offsets.h: $(obj)/vdso
EXPORT_SYMBOL(clear_page);
/* user mem (segment) */
-EXPORT_SYMBOL(__copy_from_user);
-EXPORT_SYMBOL(__copy_to_user);
+EXPORT_SYMBOL(__arch_copy_from_user);
+EXPORT_SYMBOL(__arch_copy_to_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__copy_in_user);
*/
#define TYPE_SWPB (1 << 22)
-/*
- * Set up process info to signal segmentation fault - called on access error.
- */
-static void set_segfault(struct pt_regs *regs, unsigned long addr)
-{
- siginfo_t info;
-
- down_read(¤t->mm->mmap_sem);
- if (find_vma(current->mm, addr) == NULL)
- info.si_code = SEGV_MAPERR;
- else
- info.si_code = SEGV_ACCERR;
- up_read(¤t->mm->mmap_sem);
-
- info.si_signo = SIGSEGV;
- info.si_errno = 0;
- info.si_addr = (void *) instruction_pointer(regs);
-
- pr_debug("SWP{B} emulation: access caused memory abort!\n");
- arm64_notify_die("Illegal memory access", regs, &info, 0);
-}
-
static int emulate_swpX(unsigned int address, unsigned int *data,
unsigned int type)
{
return 0;
fault:
- set_segfault(regs, address);
+ pr_debug("SWP{B} emulation: access caused memory abort!\n");
+ arm64_notify_segfault(regs, address);
return 0;
}
BLANK();
DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
+ DEFINE(CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_RAW);
DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
DEFINE(CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE);
DEFINE(CLOCK_MONOTONIC_COARSE,CLOCK_MONOTONIC_COARSE);
DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
BLANK();
DEFINE(VDSO_CS_CYCLE_LAST, offsetof(struct vdso_data, cs_cycle_last));
+ DEFINE(VDSO_RAW_TIME_SEC, offsetof(struct vdso_data, raw_time_sec));
+ DEFINE(VDSO_RAW_TIME_NSEC, offsetof(struct vdso_data, raw_time_nsec));
DEFINE(VDSO_XTIME_CLK_SEC, offsetof(struct vdso_data, xtime_clock_sec));
DEFINE(VDSO_XTIME_CLK_NSEC, offsetof(struct vdso_data, xtime_clock_nsec));
DEFINE(VDSO_XTIME_CRS_SEC, offsetof(struct vdso_data, xtime_coarse_sec));
DEFINE(VDSO_WTM_CLK_SEC, offsetof(struct vdso_data, wtm_clock_sec));
DEFINE(VDSO_WTM_CLK_NSEC, offsetof(struct vdso_data, wtm_clock_nsec));
DEFINE(VDSO_TB_SEQ_COUNT, offsetof(struct vdso_data, tb_seq_count));
- DEFINE(VDSO_CS_MULT, offsetof(struct vdso_data, cs_mult));
+ DEFINE(VDSO_CS_MONO_MULT, offsetof(struct vdso_data, cs_mono_mult));
+ DEFINE(VDSO_CS_RAW_MULT, offsetof(struct vdso_data, cs_raw_mult));
DEFINE(VDSO_CS_SHIFT, offsetof(struct vdso_data, cs_shift));
DEFINE(VDSO_TZ_MINWEST, offsetof(struct vdso_data, tz_minuteswest));
DEFINE(VDSO_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime));
--- /dev/null
+/*
+ * CPU reset routines
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ * Copyright (C) 2015 Huawei Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/sysreg.h>
+#include <asm/virt.h>
+
+.text
+.pushsection .idmap.text, "ax"
+
+/*
+ * __cpu_soft_restart(el2_switch, entry, arg0, arg1, arg2) - Helper for
+ * cpu_soft_restart.
+ *
+ * @el2_switch: Flag to indicate a swich to EL2 is needed.
+ * @entry: Location to jump to for soft reset.
+ * arg0: First argument passed to @entry.
+ * arg1: Second argument passed to @entry.
+ * arg2: Third argument passed to @entry.
+ *
+ * Put the CPU into the same state as it would be if it had been reset, and
+ * branch to what would be the reset vector. It must be executed with the
+ * flat identity mapping.
+ */
+ENTRY(__cpu_soft_restart)
+ /* Clear sctlr_el1 flags. */
+ mrs x12, sctlr_el1
+ ldr x13, =SCTLR_ELx_FLAGS
+ bic x12, x12, x13
+ msr sctlr_el1, x12
+ isb
+
+ cbz x0, 1f // el2_switch?
+ mov x0, #HVC_SOFT_RESTART
+ hvc #0 // no return
+
+1: mov x18, x1 // entry
+ mov x0, x2 // arg0
+ mov x1, x3 // arg1
+ mov x2, x4 // arg2
+ br x18
+ENDPROC(__cpu_soft_restart)
+
+.popsection
--- /dev/null
+/*
+ * CPU reset routines
+ *
+ * Copyright (C) 2015 Huawei Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ARM64_CPU_RESET_H
+#define _ARM64_CPU_RESET_H
+
+#include <asm/virt.h>
+
+void __cpu_soft_restart(unsigned long el2_switch, unsigned long entry,
+ unsigned long arg0, unsigned long arg1, unsigned long arg2);
+
+static inline void __noreturn cpu_soft_restart(unsigned long el2_switch,
+ unsigned long entry, unsigned long arg0, unsigned long arg1,
+ unsigned long arg2)
+{
+ typeof(__cpu_soft_restart) *restart;
+
+ el2_switch = el2_switch && !is_kernel_in_hyp_mode() &&
+ is_hyp_mode_available();
+ restart = (void *)virt_to_phys(__cpu_soft_restart);
+
+ cpu_install_idmap();
+ restart(el2_switch, entry, arg0, arg1, arg2);
+ unreachable();
+}
+
+#endif
.desc = "ARM errata 826319, 827319, 824069",
.capability = ARM64_WORKAROUND_CLEAN_CACHE,
MIDR_RANGE(MIDR_CORTEX_A53, 0x00, 0x02),
+ .enable = cpu_enable_cache_maint_trap,
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_819472
.desc = "ARM errata 819472",
.capability = ARM64_WORKAROUND_CLEAN_CACHE,
MIDR_RANGE(MIDR_CORTEX_A53, 0x00, 0x01),
+ .enable = cpu_enable_cache_maint_trap,
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_832075
{
update_cpu_capabilities(arm64_errata, "enabling workaround for");
}
+
+void __init enable_errata_workarounds(void)
+{
+ enable_cpu_capabilities(arm64_errata);
+}
* Run through the enabled capabilities and enable() it on all active
* CPUs
*/
-static void __init
-enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
+void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
{
for (; caps->matches; caps++)
if (caps->enable && cpus_have_cap(caps->capability))
/* Set the CPU feature capabilies */
setup_feature_capabilities();
+ enable_errata_workarounds();
setup_elf_hwcaps(arm64_elf_hwcaps);
if (system_supports_32bit_el0())
.show = c_show
};
+
+static struct kobj_type cpuregs_kobj_type = {
+ .sysfs_ops = &kobj_sysfs_ops,
+};
+
+/*
+ * The ARM ARM uses the phrase "32-bit register" to describe a register
+ * whose upper 32 bits are RES0 (per C5.1.1, ARM DDI 0487A.i), however
+ * no statement is made as to whether the upper 32 bits will or will not
+ * be made use of in future, and between ARM DDI 0487A.c and ARM DDI
+ * 0487A.d CLIDR_EL1 was expanded from 32-bit to 64-bit.
+ *
+ * Thus, while both MIDR_EL1 and REVIDR_EL1 are described as 32-bit
+ * registers, we expose them both as 64 bit values to cater for possible
+ * future expansion without an ABI break.
+ */
+#define kobj_to_cpuinfo(kobj) container_of(kobj, struct cpuinfo_arm64, kobj)
+#define CPUREGS_ATTR_RO(_name, _field) \
+ static ssize_t _name##_show(struct kobject *kobj, \
+ struct kobj_attribute *attr, char *buf) \
+ { \
+ struct cpuinfo_arm64 *info = kobj_to_cpuinfo(kobj); \
+ \
+ if (info->reg_midr) \
+ return sprintf(buf, "0x%016x\n", info->reg_##_field); \
+ else \
+ return 0; \
+ } \
+ static struct kobj_attribute cpuregs_attr_##_name = __ATTR_RO(_name)
+
+CPUREGS_ATTR_RO(midr_el1, midr);
+CPUREGS_ATTR_RO(revidr_el1, revidr);
+
+static struct attribute *cpuregs_id_attrs[] = {
+ &cpuregs_attr_midr_el1.attr,
+ &cpuregs_attr_revidr_el1.attr,
+ NULL
+};
+
+static struct attribute_group cpuregs_attr_group = {
+ .attrs = cpuregs_id_attrs,
+ .name = "identification"
+};
+
+static int cpuid_add_regs(int cpu)
+{
+ int rc;
+ struct device *dev;
+ struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
+
+ dev = get_cpu_device(cpu);
+ if (!dev) {
+ rc = -ENODEV;
+ goto out;
+ }
+ rc = kobject_add(&info->kobj, &dev->kobj, "regs");
+ if (rc)
+ goto out;
+ rc = sysfs_create_group(&info->kobj, &cpuregs_attr_group);
+ if (rc)
+ kobject_del(&info->kobj);
+out:
+ return rc;
+}
+
+static int cpuid_remove_regs(int cpu)
+{
+ struct device *dev;
+ struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
+
+ dev = get_cpu_device(cpu);
+ if (!dev)
+ return -ENODEV;
+ if (info->kobj.parent) {
+ sysfs_remove_group(&info->kobj, &cpuregs_attr_group);
+ kobject_del(&info->kobj);
+ }
+
+ return 0;
+}
+
+static int cpuid_callback(struct notifier_block *nb,
+ unsigned long action, void *hcpu)
+{
+ int rc = 0;
+ unsigned long cpu = (unsigned long)hcpu;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_ONLINE:
+ rc = cpuid_add_regs(cpu);
+ break;
+ case CPU_DEAD:
+ rc = cpuid_remove_regs(cpu);
+ break;
+ }
+
+ return notifier_from_errno(rc);
+}
+
+static int __init cpuinfo_regs_init(void)
+{
+ int cpu;
+
+ cpu_notifier_register_begin();
+
+ for_each_possible_cpu(cpu) {
+ struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
+
+ kobject_init(&info->kobj, &cpuregs_kobj_type);
+ if (cpu_online(cpu))
+ cpuid_add_regs(cpu);
+ }
+ __hotcpu_notifier(cpuid_callback, 0);
+
+ cpu_notifier_register_done();
+ return 0;
+}
static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
{
unsigned int cpu = smp_processor_id();
info->reg_ctr = read_cpuid_cachetype();
info->reg_dczid = read_cpuid(DCZID_EL0);
info->reg_midr = read_cpuid_id();
+ info->reg_revidr = read_cpuid(REVIDR_EL1);
info->reg_id_aa64dfr0 = read_cpuid(ID_AA64DFR0_EL1);
info->reg_id_aa64dfr1 = read_cpuid(ID_AA64DFR1_EL1);
boot_cpu_data = *info;
init_cpu_features(&boot_cpu_data);
}
+
+device_initcall(cpuinfo_regs_init);
/* Clear the OS lock. */
on_each_cpu(clear_os_lock, NULL, 1);
isb();
- local_dbg_enable();
/* Register hotplug handler. */
__register_cpu_notifier(&os_lock_nb);
*/
static void set_regs_spsr_ss(struct pt_regs *regs)
{
- unsigned long spsr;
-
- spsr = regs->pstate;
- spsr &= ~DBG_SPSR_SS;
- spsr |= DBG_SPSR_SS;
- regs->pstate = spsr;
+ regs->pstate |= DBG_SPSR_SS;
}
NOKPROBE_SYMBOL(set_regs_spsr_ss);
static void clear_regs_spsr_ss(struct pt_regs *regs)
{
- unsigned long spsr;
-
- spsr = regs->pstate;
- spsr &= ~DBG_SPSR_SS;
- regs->pstate = spsr;
+ regs->pstate &= ~DBG_SPSR_SS;
}
NOKPROBE_SYMBOL(clear_regs_spsr_ss);
int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
{
pteval_t prot_val = create_mapping_protection(md);
+ bool allow_block_mappings = (md->type != EFI_RUNTIME_SERVICES_CODE &&
+ md->type != EFI_RUNTIME_SERVICES_DATA);
+
+ if (!PAGE_ALIGNED(md->phys_addr) ||
+ !PAGE_ALIGNED(md->num_pages << EFI_PAGE_SHIFT)) {
+ /*
+ * If the end address of this region is not aligned to page
+ * size, the mapping is rounded up, and may end up sharing a
+ * page frame with the next UEFI memory region. If we create
+ * a block entry now, we may need to split it again when mapping
+ * the next region, and support for that is going to be removed
+ * from the MMU routines. So avoid block mappings altogether in
+ * that case.
+ */
+ allow_block_mappings = false;
+ }
create_pgd_mapping(mm, md->phys_addr, md->virt_addr,
md->num_pages << EFI_PAGE_SHIFT,
- __pgprot(prot_val | PTE_NG));
+ __pgprot(prot_val | PTE_NG), allow_block_mappings);
+ return 0;
+}
+
+static int __init set_permissions(pte_t *ptep, pgtable_t token,
+ unsigned long addr, void *data)
+{
+ efi_memory_desc_t *md = data;
+ pte_t pte = *ptep;
+
+ if (md->attribute & EFI_MEMORY_RO)
+ pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+ if (md->attribute & EFI_MEMORY_XP)
+ pte = set_pte_bit(pte, __pgprot(PTE_PXN));
+ set_pte(ptep, pte);
return 0;
}
+int __init efi_set_mapping_permissions(struct mm_struct *mm,
+ efi_memory_desc_t *md)
+{
+ BUG_ON(md->type != EFI_RUNTIME_SERVICES_CODE &&
+ md->type != EFI_RUNTIME_SERVICES_DATA);
+
+ /*
+ * Calling apply_to_page_range() is only safe on regions that are
+ * guaranteed to be mapped down to pages. Since we are only called
+ * for regions that have been mapped using efi_create_mapping() above
+ * (and this is checked by the generic Memory Attributes table parsing
+ * routines), there is no need to check that again here.
+ */
+ return apply_to_page_range(mm, md->virt_addr,
+ md->num_pages << EFI_PAGE_SHIFT,
+ set_permissions, md);
+}
+
static int __init arm64_dmi_init(void)
{
/*
cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
b.eq el0_fpsimd_exc
cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
- b.eq el0_undef
+ b.eq el0_sys
cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception
b.eq el0_sp_pc
cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception
enable_dbg_and_irq
ct_user_exit
mov x0, x26
- orr x1, x25, #1 << 24 // use reserved ISS bit for instruction aborts
+ mov x1, x25
mov x2, sp
bl do_mem_abort
b ret_to_user
mov x0, sp
bl do_undefinstr
b ret_to_user
+el0_sys:
+ /*
+ * System instructions, for trapped cache maintenance instructions
+ */
+ enable_dbg_and_irq
+ ct_user_exit
+ mov x0, x25
+ mov x1, sp
+ bl do_sysinstr
+ b ret_to_user
el0_dbg:
/*
* Debug exception handling
msr vbar_el2, x1
b 9f
+2: cmp x0, #HVC_SOFT_RESTART
+ b.ne 3f
+ mov x0, x2
+ mov x2, x4
+ mov x4, x1
+ mov x1, x3
+ br x4 // no return
+
/* Someone called kvm_call_hyp() against the hyp-stub... */
-2: mov x0, #ARM_EXCEPTION_HYP_GONE
+3: mov x0, #ARM_EXCEPTION_HYP_GONE
9: eret
ENDPROC(el1_sync)
--- /dev/null
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kexec.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
+#include <asm/mmu_context.h>
+
+#include "cpu-reset.h"
+
+/* Global variables for the arm64_relocate_new_kernel routine. */
+extern const unsigned char arm64_relocate_new_kernel[];
+extern const unsigned long arm64_relocate_new_kernel_size;
+
+static unsigned long kimage_start;
+
+/**
+ * kexec_image_info - For debugging output.
+ */
+#define kexec_image_info(_i) _kexec_image_info(__func__, __LINE__, _i)
+static void _kexec_image_info(const char *func, int line,
+ const struct kimage *kimage)
+{
+ unsigned long i;
+
+ pr_debug("%s:%d:\n", func, line);
+ pr_debug(" kexec kimage info:\n");
+ pr_debug(" type: %d\n", kimage->type);
+ pr_debug(" start: %lx\n", kimage->start);
+ pr_debug(" head: %lx\n", kimage->head);
+ pr_debug(" nr_segments: %lu\n", kimage->nr_segments);
+
+ for (i = 0; i < kimage->nr_segments; i++) {
+ pr_debug(" segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
+ i,
+ kimage->segment[i].mem,
+ kimage->segment[i].mem + kimage->segment[i].memsz,
+ kimage->segment[i].memsz,
+ kimage->segment[i].memsz / PAGE_SIZE);
+ }
+}
+
+void machine_kexec_cleanup(struct kimage *kimage)
+{
+ /* Empty routine needed to avoid build errors. */
+}
+
+/**
+ * machine_kexec_prepare - Prepare for a kexec reboot.
+ *
+ * Called from the core kexec code when a kernel image is loaded.
+ * Forbid loading a kexec kernel if we have no way of hotplugging cpus or cpus
+ * are stuck in the kernel. This avoids a panic once we hit machine_kexec().
+ */
+int machine_kexec_prepare(struct kimage *kimage)
+{
+ kimage_start = kimage->start;
+
+ kexec_image_info(kimage);
+
+ if (kimage->type != KEXEC_TYPE_CRASH && cpus_are_stuck_in_kernel()) {
+ pr_err("Can't kexec: CPUs are stuck in the kernel.\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+/**
+ * kexec_list_flush - Helper to flush the kimage list and source pages to PoC.
+ */
+static void kexec_list_flush(struct kimage *kimage)
+{
+ kimage_entry_t *entry;
+
+ for (entry = &kimage->head; ; entry++) {
+ unsigned int flag;
+ void *addr;
+
+ /* flush the list entries. */
+ __flush_dcache_area(entry, sizeof(kimage_entry_t));
+
+ flag = *entry & IND_FLAGS;
+ if (flag == IND_DONE)
+ break;
+
+ addr = phys_to_virt(*entry & PAGE_MASK);
+
+ switch (flag) {
+ case IND_INDIRECTION:
+ /* Set entry point just before the new list page. */
+ entry = (kimage_entry_t *)addr - 1;
+ break;
+ case IND_SOURCE:
+ /* flush the source pages. */
+ __flush_dcache_area(addr, PAGE_SIZE);
+ break;
+ case IND_DESTINATION:
+ break;
+ default:
+ BUG();
+ }
+ }
+}
+
+/**
+ * kexec_segment_flush - Helper to flush the kimage segments to PoC.
+ */
+static void kexec_segment_flush(const struct kimage *kimage)
+{
+ unsigned long i;
+
+ pr_debug("%s:\n", __func__);
+
+ for (i = 0; i < kimage->nr_segments; i++) {
+ pr_debug(" segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
+ i,
+ kimage->segment[i].mem,
+ kimage->segment[i].mem + kimage->segment[i].memsz,
+ kimage->segment[i].memsz,
+ kimage->segment[i].memsz / PAGE_SIZE);
+
+ __flush_dcache_area(phys_to_virt(kimage->segment[i].mem),
+ kimage->segment[i].memsz);
+ }
+}
+
+/**
+ * machine_kexec - Do the kexec reboot.
+ *
+ * Called from the core kexec code for a sys_reboot with LINUX_REBOOT_CMD_KEXEC.
+ */
+void machine_kexec(struct kimage *kimage)
+{
+ phys_addr_t reboot_code_buffer_phys;
+ void *reboot_code_buffer;
+
+ /*
+ * New cpus may have become stuck_in_kernel after we loaded the image.
+ */
+ BUG_ON(cpus_are_stuck_in_kernel() || (num_online_cpus() > 1));
+
+ reboot_code_buffer_phys = page_to_phys(kimage->control_code_page);
+ reboot_code_buffer = phys_to_virt(reboot_code_buffer_phys);
+
+ kexec_image_info(kimage);
+
+ pr_debug("%s:%d: control_code_page: %p\n", __func__, __LINE__,
+ kimage->control_code_page);
+ pr_debug("%s:%d: reboot_code_buffer_phys: %pa\n", __func__, __LINE__,
+ &reboot_code_buffer_phys);
+ pr_debug("%s:%d: reboot_code_buffer: %p\n", __func__, __LINE__,
+ reboot_code_buffer);
+ pr_debug("%s:%d: relocate_new_kernel: %p\n", __func__, __LINE__,
+ arm64_relocate_new_kernel);
+ pr_debug("%s:%d: relocate_new_kernel_size: 0x%lx(%lu) bytes\n",
+ __func__, __LINE__, arm64_relocate_new_kernel_size,
+ arm64_relocate_new_kernel_size);
+
+ /*
+ * Copy arm64_relocate_new_kernel to the reboot_code_buffer for use
+ * after the kernel is shut down.
+ */
+ memcpy(reboot_code_buffer, arm64_relocate_new_kernel,
+ arm64_relocate_new_kernel_size);
+
+ /* Flush the reboot_code_buffer in preparation for its execution. */
+ __flush_dcache_area(reboot_code_buffer, arm64_relocate_new_kernel_size);
+ flush_icache_range((uintptr_t)reboot_code_buffer,
+ arm64_relocate_new_kernel_size);
+
+ /* Flush the kimage list and its buffers. */
+ kexec_list_flush(kimage);
+
+ /* Flush the new image if already in place. */
+ if (kimage->head & IND_DONE)
+ kexec_segment_flush(kimage);
+
+ pr_info("Bye!\n");
+
+ /* Disable all DAIF exceptions. */
+ asm volatile ("msr daifset, #0xf" : : : "memory");
+
+ /*
+ * cpu_soft_restart will shutdown the MMU, disable data caches, then
+ * transfer control to the reboot_code_buffer which contains a copy of
+ * the arm64_relocate_new_kernel routine. arm64_relocate_new_kernel
+ * uses physical addressing to relocate the new image to its final
+ * position and transfers control to the image entry point when the
+ * relocation is complete.
+ */
+
+ cpu_soft_restart(1, reboot_code_buffer_phys, kimage->head,
+ kimage_start, 0);
+
+ BUG(); /* Should never get here. */
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+ /* Empty routine needed to avoid build errors. */
+}
--- /dev/null
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kexec.h>
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/kexec.h>
+#include <asm/page.h>
+#include <asm/sysreg.h>
+
+/*
+ * arm64_relocate_new_kernel - Put a 2nd stage image in place and boot it.
+ *
+ * The memory that the old kernel occupies may be overwritten when coping the
+ * new image to its final location. To assure that the
+ * arm64_relocate_new_kernel routine which does that copy is not overwritten,
+ * all code and data needed by arm64_relocate_new_kernel must be between the
+ * symbols arm64_relocate_new_kernel and arm64_relocate_new_kernel_end. The
+ * machine_kexec() routine will copy arm64_relocate_new_kernel to the kexec
+ * control_code_page, a special page which has been set up to be preserved
+ * during the copy operation.
+ */
+ENTRY(arm64_relocate_new_kernel)
+
+ /* Setup the list loop variables. */
+ mov x17, x1 /* x17 = kimage_start */
+ mov x16, x0 /* x16 = kimage_head */
+ dcache_line_size x15, x0 /* x15 = dcache line size */
+ mov x14, xzr /* x14 = entry ptr */
+ mov x13, xzr /* x13 = copy dest */
+
+ /* Clear the sctlr_el2 flags. */
+ mrs x0, CurrentEL
+ cmp x0, #CurrentEL_EL2
+ b.ne 1f
+ mrs x0, sctlr_el2
+ ldr x1, =SCTLR_ELx_FLAGS
+ bic x0, x0, x1
+ msr sctlr_el2, x0
+ isb
+1:
+
+ /* Check if the new image needs relocation. */
+ tbnz x16, IND_DONE_BIT, .Ldone
+
+.Lloop:
+ and x12, x16, PAGE_MASK /* x12 = addr */
+
+ /* Test the entry flags. */
+.Ltest_source:
+ tbz x16, IND_SOURCE_BIT, .Ltest_indirection
+
+ /* Invalidate dest page to PoC. */
+ mov x0, x13
+ add x20, x0, #PAGE_SIZE
+ sub x1, x15, #1
+ bic x0, x0, x1
+2: dc ivac, x0
+ add x0, x0, x15
+ cmp x0, x20
+ b.lo 2b
+ dsb sy
+
+ mov x20, x13
+ mov x21, x12
+ copy_page x20, x21, x0, x1, x2, x3, x4, x5, x6, x7
+
+ /* dest += PAGE_SIZE */
+ add x13, x13, PAGE_SIZE
+ b .Lnext
+
+.Ltest_indirection:
+ tbz x16, IND_INDIRECTION_BIT, .Ltest_destination
+
+ /* ptr = addr */
+ mov x14, x12
+ b .Lnext
+
+.Ltest_destination:
+ tbz x16, IND_DESTINATION_BIT, .Lnext
+
+ /* dest = addr */
+ mov x13, x12
+
+.Lnext:
+ /* entry = *ptr++ */
+ ldr x16, [x14], #8
+
+ /* while (!(entry & DONE)) */
+ tbz x16, IND_DONE_BIT, .Lloop
+
+.Ldone:
+ /* wait for writes from copy_page to finish */
+ dsb nsh
+ ic iallu
+ dsb nsh
+ isb
+
+ /* Start new image. */
+ mov x0, xzr
+ mov x1, xzr
+ mov x2, xzr
+ mov x3, xzr
+ br x17
+
+ENDPROC(arm64_relocate_new_kernel)
+
+.ltorg
+
+.align 3 /* To keep the 64-bit values below naturally aligned. */
+
+.Lcopy_end:
+.org KEXEC_CONTROL_PAGE_SIZE
+
+/*
+ * arm64_relocate_new_kernel_size - Number of bytes to copy to the
+ * control_code_page.
+ */
+.globl arm64_relocate_new_kernel_size
+arm64_relocate_new_kernel_size:
+ .quad .Lcopy_end - arm64_relocate_new_kernel
struct resource *res;
kernel_code.start = virt_to_phys(_text);
- kernel_code.end = virt_to_phys(_etext - 1);
+ kernel_code.end = virt_to_phys(__init_begin - 1);
kernel_data.start = virt_to_phys(_sdata);
kernel_data.end = virt_to_phys(_end - 1);
set_cpu_online(cpu, true);
complete(&cpu_running);
- local_dbg_enable();
local_irq_enable();
local_async_enable();
void __init smp_prepare_boot_cpu(void)
{
+ set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
cpuinfo_store_boot_cpu();
save_boot_cpu_run_el();
- set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
}
static u64 __init of_get_cpu_mpidr(struct device_node *dn)
smp_store_cpu_info(smp_processor_id());
+ /*
+ * If UP is mandated by "nosmp" (which implies "maxcpus=0"), don't set
+ * secondary CPUs present.
+ */
+ if (max_cpus == 0)
+ return;
+
/*
* Initialise the present map (which describes the set of CPUs
* actually populated at the present time) and release the
{
return -EINVAL;
}
+
+static bool have_cpu_die(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ int any_cpu = raw_smp_processor_id();
+
+ if (cpu_ops[any_cpu]->cpu_die)
+ return true;
+#endif
+ return false;
+}
+
+bool cpus_are_stuck_in_kernel(void)
+{
+ bool smp_spin_tables = (num_possible_cpus() > 1 && !have_cpu_die());
+
+ return !!cpus_stuck_in_kernel || smp_spin_tables;
+}
#include <asm/stacktrace.h>
#include <asm/exception.h>
#include <asm/system_misc.h>
+#include <asm/sysreg.h>
static const char *handler[]= {
"Synchronous Abort",
int show_unhandled_signals = 1;
/*
- * Dump out the contents of some memory nicely...
+ * Dump out the contents of some kernel memory nicely...
*/
static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
- unsigned long top, bool compat)
+ unsigned long top)
{
unsigned long first;
mm_segment_t fs;
int i;
- unsigned int width = compat ? 4 : 8;
/*
* We need to switch to kernel mode so that we can use __get_user
memset(str, ' ', sizeof(str));
str[sizeof(str) - 1] = '\0';
- for (p = first, i = 0; i < (32 / width)
- && p < top; i++, p += width) {
+ for (p = first, i = 0; i < (32 / 8)
+ && p < top; i++, p += 8) {
if (p >= bottom && p < top) {
unsigned long val;
- if (width == 8) {
- if (__get_user(val, (unsigned long *)p) == 0)
- sprintf(str + i * 17, " %016lx", val);
- else
- sprintf(str + i * 17, " ????????????????");
- } else {
- if (__get_user(val, (unsigned int *)p) == 0)
- sprintf(str + i * 9, " %08lx", val);
- else
- sprintf(str + i * 9, " ????????");
- }
+ if (__get_user(val, (unsigned long *)p) == 0)
+ sprintf(str + i * 17, " %016lx", val);
+ else
+ sprintf(str + i * 17, " ????????????????");
}
}
printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
stack = IRQ_STACK_TO_TASK_STACK(irq_stack_ptr);
dump_mem("", "Exception stack", stack,
- stack + sizeof(struct pt_regs), false);
+ stack + sizeof(struct pt_regs));
}
}
}
pr_emerg("Process %.*s (pid: %d, stack limit = 0x%p)\n",
TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
- if (!user_mode(regs) || in_interrupt()) {
+ if (!user_mode(regs)) {
dump_mem(KERN_EMERG, "Stack: ", regs->sp,
- THREAD_SIZE + (unsigned long)task_stack_page(tsk),
- compat_user_mode(regs));
+ THREAD_SIZE + (unsigned long)task_stack_page(tsk));
dump_backtrace(regs, tsk);
dump_instr(KERN_EMERG, regs);
}
return fn ? fn(regs, instr) : 1;
}
-asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
+static void force_signal_inject(int signal, int code, struct pt_regs *regs,
+ unsigned long address)
{
siginfo_t info;
void __user *pc = (void __user *)instruction_pointer(regs);
+ const char *desc;
+ switch (signal) {
+ case SIGILL:
+ desc = "undefined instruction";
+ break;
+ case SIGSEGV:
+ desc = "illegal memory access";
+ break;
+ default:
+ desc = "bad mode";
+ break;
+ }
+
+ if (unhandled_signal(current, signal) &&
+ show_unhandled_signals_ratelimited()) {
+ pr_info("%s[%d]: %s: pc=%p\n",
+ current->comm, task_pid_nr(current), desc, pc);
+ dump_instr(KERN_INFO, regs);
+ }
+
+ info.si_signo = signal;
+ info.si_errno = 0;
+ info.si_code = code;
+ info.si_addr = pc;
+
+ arm64_notify_die(desc, regs, &info, 0);
+}
+
+/*
+ * Set up process info to signal segmentation fault - called on access error.
+ */
+void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr)
+{
+ int code;
+
+ down_read(¤t->mm->mmap_sem);
+ if (find_vma(current->mm, addr) == NULL)
+ code = SEGV_MAPERR;
+ else
+ code = SEGV_ACCERR;
+ up_read(¤t->mm->mmap_sem);
+
+ force_signal_inject(SIGSEGV, code, regs, addr);
+}
+
+asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
+{
/* check for AArch32 breakpoint instructions */
if (!aarch32_break_handler(regs))
return;
if (call_undef_hook(regs) == 0)
return;
- if (unhandled_signal(current, SIGILL) && show_unhandled_signals_ratelimited()) {
- pr_info("%s[%d]: undefined instruction: pc=%p\n",
- current->comm, task_pid_nr(current), pc);
- dump_instr(KERN_INFO, regs);
- }
+ force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
+}
- info.si_signo = SIGILL;
- info.si_errno = 0;
- info.si_code = ILL_ILLOPC;
- info.si_addr = pc;
+void cpu_enable_cache_maint_trap(void *__unused)
+{
+ config_sctlr_el1(SCTLR_EL1_UCI, 0);
+}
+
+#define __user_cache_maint(insn, address, res) \
+ asm volatile ( \
+ "1: " insn ", %1\n" \
+ " mov %w0, #0\n" \
+ "2:\n" \
+ " .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "3: mov %w0, %w2\n" \
+ " b 2b\n" \
+ " .popsection\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r" (res) \
+ : "r" (address), "i" (-EFAULT) )
+
+asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs)
+{
+ unsigned long address;
+ int ret;
- arm64_notify_die("Oops - undefined instruction", regs, &info, 0);
+ /* if this is a write with: Op0=1, Op2=1, Op1=3, CRn=7 */
+ if ((esr & 0x01fffc01) == 0x0012dc00) {
+ int rt = (esr >> 5) & 0x1f;
+ int crm = (esr >> 1) & 0x0f;
+
+ address = (rt == 31) ? 0 : regs->regs[rt];
+
+ switch (crm) {
+ case 11: /* DC CVAU, gets promoted */
+ __user_cache_maint("dc civac", address, ret);
+ break;
+ case 10: /* DC CVAC, gets promoted */
+ __user_cache_maint("dc civac", address, ret);
+ break;
+ case 14: /* DC CIVAC */
+ __user_cache_maint("dc civac", address, ret);
+ break;
+ case 5: /* IC IVAU */
+ __user_cache_maint("ic ivau", address, ret);
+ break;
+ default:
+ force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
+ return;
+ }
+ } else {
+ force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
+ return;
+ }
+
+ if (ret)
+ arm64_notify_segfault(regs, address);
+ else
+ regs->pc += 4;
}
long compat_arm_syscall(struct pt_regs *regs);
const char *esr_get_class_string(u32 esr)
{
- return esr_class_str[esr >> ESR_ELx_EC_SHIFT];
+ return esr_class_str[ESR_ELx_EC(esr)];
}
/*
vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec;
if (!use_syscall) {
+ /* tkr_mono.cycle_last == tkr_raw.cycle_last */
vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last;
+ vdso_data->raw_time_sec = tk->raw_time.tv_sec;
+ vdso_data->raw_time_nsec = tk->raw_time.tv_nsec;
vdso_data->xtime_clock_sec = tk->xtime_sec;
vdso_data->xtime_clock_nsec = tk->tkr_mono.xtime_nsec;
- vdso_data->cs_mult = tk->tkr_mono.mult;
+ /* tkr_raw.xtime_nsec == 0 */
+ vdso_data->cs_mono_mult = tk->tkr_mono.mult;
+ vdso_data->cs_raw_mult = tk->tkr_raw.mult;
+ /* tkr_mono.shift == tkr_raw.shift */
vdso_data->cs_shift = tk->tkr_mono.shift;
}
ccflags-y += -Wl,-shared
obj-y += vdso.o
-extra-y += vdso.lds vdso-offsets.h
+extra-y += vdso.lds
CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
# Force dependency (incbin is bad)
gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
quiet_cmd_vdsosym = VDSOSYM $@
define cmd_vdsosym
- $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@ && \
- cp $@ include/generated/
+ $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
endef
-$(obj)/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
+include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
$(call if_changed,vdsosym)
# Assembly rules for the .S files
#define NSEC_PER_SEC_HI16 0x3b9a
vdso_data .req x6
-use_syscall .req w7
-seqcnt .req w8
+seqcnt .req w7
+w_tmp .req w8
+x_tmp .req x8
+
+/*
+ * Conventions for macro arguments:
+ * - An argument is write-only if its name starts with "res".
+ * - All other arguments are read-only, unless otherwise specified.
+ */
.macro seqcnt_acquire
9999: ldr seqcnt, [vdso_data, #VDSO_TB_SEQ_COUNT]
tbnz seqcnt, #0, 9999b
dmb ishld
- ldr use_syscall, [vdso_data, #VDSO_USE_SYSCALL]
.endm
- .macro seqcnt_read, cnt
+ .macro seqcnt_check fail
dmb ishld
- ldr \cnt, [vdso_data, #VDSO_TB_SEQ_COUNT]
+ ldr w_tmp, [vdso_data, #VDSO_TB_SEQ_COUNT]
+ cmp w_tmp, seqcnt
+ b.ne \fail
.endm
- .macro seqcnt_check, cnt, fail
- cmp \cnt, seqcnt
- b.ne \fail
+ .macro syscall_check fail
+ ldr w_tmp, [vdso_data, #VDSO_USE_SYSCALL]
+ cbnz w_tmp, \fail
+ .endm
+
+ .macro get_nsec_per_sec res
+ mov \res, #NSEC_PER_SEC_LO16
+ movk \res, #NSEC_PER_SEC_HI16, lsl #16
+ .endm
+
+ /*
+ * Returns the clock delta, in nanoseconds left-shifted by the clock
+ * shift.
+ */
+ .macro get_clock_shifted_nsec res, cycle_last, mult
+ /* Read the virtual counter. */
+ isb
+ mrs x_tmp, cntvct_el0
+ /* Calculate cycle delta and convert to ns. */
+ sub \res, x_tmp, \cycle_last
+ /* We can only guarantee 56 bits of precision. */
+ movn x_tmp, #0xff00, lsl #48
+ and \res, x_tmp, \res
+ mul \res, \res, \mult
+ .endm
+
+ /*
+ * Returns in res_{sec,nsec} the REALTIME timespec, based on the
+ * "wall time" (xtime) and the clock_mono delta.
+ */
+ .macro get_ts_realtime res_sec, res_nsec, \
+ clock_nsec, xtime_sec, xtime_nsec, nsec_to_sec
+ add \res_nsec, \clock_nsec, \xtime_nsec
+ udiv x_tmp, \res_nsec, \nsec_to_sec
+ add \res_sec, \xtime_sec, x_tmp
+ msub \res_nsec, x_tmp, \nsec_to_sec, \res_nsec
+ .endm
+
+ /*
+ * Returns in res_{sec,nsec} the timespec based on the clock_raw delta,
+ * used for CLOCK_MONOTONIC_RAW.
+ */
+ .macro get_ts_clock_raw res_sec, res_nsec, clock_nsec, nsec_to_sec
+ udiv \res_sec, \clock_nsec, \nsec_to_sec
+ msub \res_nsec, \res_sec, \nsec_to_sec, \clock_nsec
+ .endm
+
+ /* sec and nsec are modified in place. */
+ .macro add_ts sec, nsec, ts_sec, ts_nsec, nsec_to_sec
+ /* Add timespec. */
+ add \sec, \sec, \ts_sec
+ add \nsec, \nsec, \ts_nsec
+
+ /* Normalise the new timespec. */
+ cmp \nsec, \nsec_to_sec
+ b.lt 9999f
+ sub \nsec, \nsec, \nsec_to_sec
+ add \sec, \sec, #1
+9999:
+ cmp \nsec, #0
+ b.ge 9998f
+ add \nsec, \nsec, \nsec_to_sec
+ sub \sec, \sec, #1
+9998:
+ .endm
+
+ .macro clock_gettime_return, shift=0
+ .if \shift == 1
+ lsr x11, x11, x12
+ .endif
+ stp x10, x11, [x1, #TSPEC_TV_SEC]
+ mov x0, xzr
+ ret
+ .endm
+
+ .macro jump_slot jumptable, index, label
+ .if (. - \jumptable) != 4 * (\index)
+ .error "Jump slot index mismatch"
+ .endif
+ b \label
.endm
.text
/* int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); */
ENTRY(__kernel_gettimeofday)
.cfi_startproc
- mov x2, x30
- .cfi_register x30, x2
-
- /* Acquire the sequence counter and get the timespec. */
adr vdso_data, _vdso_data
-1: seqcnt_acquire
- cbnz use_syscall, 4f
-
/* If tv is NULL, skip to the timezone code. */
cbz x0, 2f
- bl __do_get_tspec
- seqcnt_check w9, 1b
+
+ /* Compute the time of day. */
+1: seqcnt_acquire
+ syscall_check fail=4f
+ ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST]
+ /* w11 = cs_mono_mult, w12 = cs_shift */
+ ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT]
+ ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC]
+ seqcnt_check fail=1b
+
+ get_nsec_per_sec res=x9
+ lsl x9, x9, x12
+
+ get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11
+ get_ts_realtime res_sec=x10, res_nsec=x11, \
+ clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9
/* Convert ns to us. */
mov x13, #1000
stp w4, w5, [x1, #TZ_MINWEST]
3:
mov x0, xzr
- ret x2
+ ret
4:
/* Syscall fallback. */
mov x8, #__NR_gettimeofday
svc #0
- ret x2
+ ret
.cfi_endproc
ENDPROC(__kernel_gettimeofday)
+#define JUMPSLOT_MAX CLOCK_MONOTONIC_COARSE
+
/* int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp); */
ENTRY(__kernel_clock_gettime)
.cfi_startproc
- cmp w0, #CLOCK_REALTIME
- ccmp w0, #CLOCK_MONOTONIC, #0x4, ne
- b.ne 2f
+ cmp w0, #JUMPSLOT_MAX
+ b.hi syscall
+ adr vdso_data, _vdso_data
+ adr x_tmp, jumptable
+ add x_tmp, x_tmp, w0, uxtw #2
+ br x_tmp
+
+ ALIGN
+jumptable:
+ jump_slot jumptable, CLOCK_REALTIME, realtime
+ jump_slot jumptable, CLOCK_MONOTONIC, monotonic
+ b syscall
+ b syscall
+ jump_slot jumptable, CLOCK_MONOTONIC_RAW, monotonic_raw
+ jump_slot jumptable, CLOCK_REALTIME_COARSE, realtime_coarse
+ jump_slot jumptable, CLOCK_MONOTONIC_COARSE, monotonic_coarse
+
+ .if (. - jumptable) != 4 * (JUMPSLOT_MAX + 1)
+ .error "Wrong jumptable size"
+ .endif
+
+ ALIGN
+realtime:
+ seqcnt_acquire
+ syscall_check fail=syscall
+ ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST]
+ /* w11 = cs_mono_mult, w12 = cs_shift */
+ ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT]
+ ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC]
+ seqcnt_check fail=realtime
- mov x2, x30
- .cfi_register x30, x2
+ /* All computations are done with left-shifted nsecs. */
+ get_nsec_per_sec res=x9
+ lsl x9, x9, x12
- /* Get kernel timespec. */
- adr vdso_data, _vdso_data
-1: seqcnt_acquire
- cbnz use_syscall, 7f
+ get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11
+ get_ts_realtime res_sec=x10, res_nsec=x11, \
+ clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9
+ clock_gettime_return, shift=1
- bl __do_get_tspec
- seqcnt_check w9, 1b
+ ALIGN
+monotonic:
+ seqcnt_acquire
+ syscall_check fail=syscall
+ ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST]
+ /* w11 = cs_mono_mult, w12 = cs_shift */
+ ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT]
+ ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC]
+ ldp x3, x4, [vdso_data, #VDSO_WTM_CLK_SEC]
+ seqcnt_check fail=monotonic
- mov x30, x2
+ /* All computations are done with left-shifted nsecs. */
+ lsl x4, x4, x12
+ get_nsec_per_sec res=x9
+ lsl x9, x9, x12
- cmp w0, #CLOCK_MONOTONIC
- b.ne 6f
+ get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11
+ get_ts_realtime res_sec=x10, res_nsec=x11, \
+ clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9
- /* Get wtm timespec. */
- ldp x13, x14, [vdso_data, #VDSO_WTM_CLK_SEC]
+ add_ts sec=x10, nsec=x11, ts_sec=x3, ts_nsec=x4, nsec_to_sec=x9
+ clock_gettime_return, shift=1
- /* Check the sequence counter. */
- seqcnt_read w9
- seqcnt_check w9, 1b
- b 4f
-2:
- cmp w0, #CLOCK_REALTIME_COARSE
- ccmp w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
- b.ne 8f
+ ALIGN
+monotonic_raw:
+ seqcnt_acquire
+ syscall_check fail=syscall
+ ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST]
+ /* w11 = cs_raw_mult, w12 = cs_shift */
+ ldp w12, w11, [vdso_data, #VDSO_CS_SHIFT]
+ ldp x13, x14, [vdso_data, #VDSO_RAW_TIME_SEC]
+ seqcnt_check fail=monotonic_raw
- /* xtime_coarse_nsec is already right-shifted */
- mov x12, #0
+ /* All computations are done with left-shifted nsecs. */
+ lsl x14, x14, x12
+ get_nsec_per_sec res=x9
+ lsl x9, x9, x12
- /* Get coarse timespec. */
- adr vdso_data, _vdso_data
-3: seqcnt_acquire
+ get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11
+ get_ts_clock_raw res_sec=x10, res_nsec=x11, \
+ clock_nsec=x15, nsec_to_sec=x9
+
+ add_ts sec=x10, nsec=x11, ts_sec=x13, ts_nsec=x14, nsec_to_sec=x9
+ clock_gettime_return, shift=1
+
+ ALIGN
+realtime_coarse:
+ seqcnt_acquire
ldp x10, x11, [vdso_data, #VDSO_XTIME_CRS_SEC]
+ seqcnt_check fail=realtime_coarse
+ clock_gettime_return
- /* Get wtm timespec. */
+ ALIGN
+monotonic_coarse:
+ seqcnt_acquire
+ ldp x10, x11, [vdso_data, #VDSO_XTIME_CRS_SEC]
ldp x13, x14, [vdso_data, #VDSO_WTM_CLK_SEC]
+ seqcnt_check fail=monotonic_coarse
- /* Check the sequence counter. */
- seqcnt_read w9
- seqcnt_check w9, 3b
+ /* Computations are done in (non-shifted) nsecs. */
+ get_nsec_per_sec res=x9
+ add_ts sec=x10, nsec=x11, ts_sec=x13, ts_nsec=x14, nsec_to_sec=x9
+ clock_gettime_return
- cmp w0, #CLOCK_MONOTONIC_COARSE
- b.ne 6f
-4:
- /* Add on wtm timespec. */
- add x10, x10, x13
- lsl x14, x14, x12
- add x11, x11, x14
-
- /* Normalise the new timespec. */
- mov x15, #NSEC_PER_SEC_LO16
- movk x15, #NSEC_PER_SEC_HI16, lsl #16
- lsl x15, x15, x12
- cmp x11, x15
- b.lt 5f
- sub x11, x11, x15
- add x10, x10, #1
-5:
- cmp x11, #0
- b.ge 6f
- add x11, x11, x15
- sub x10, x10, #1
-
-6: /* Store to the user timespec. */
- lsr x11, x11, x12
- stp x10, x11, [x1, #TSPEC_TV_SEC]
- mov x0, xzr
- ret
-7:
- mov x30, x2
-8: /* Syscall fallback. */
+ ALIGN
+syscall: /* Syscall fallback. */
mov x8, #__NR_clock_gettime
svc #0
ret
.cfi_startproc
cmp w0, #CLOCK_REALTIME
ccmp w0, #CLOCK_MONOTONIC, #0x4, ne
+ ccmp w0, #CLOCK_MONOTONIC_RAW, #0x4, ne
b.ne 1f
ldr x2, 5f
.quad CLOCK_COARSE_RES
.cfi_endproc
ENDPROC(__kernel_clock_getres)
-
-/*
- * Read the current time from the architected counter.
- * Expects vdso_data to be initialised.
- * Clobbers the temporary registers (x9 - x15).
- * Returns:
- * - w9 = vDSO sequence counter
- * - (x10, x11) = (ts->tv_sec, shifted ts->tv_nsec)
- * - w12 = cs_shift
- */
-ENTRY(__do_get_tspec)
- .cfi_startproc
-
- /* Read from the vDSO data page. */
- ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST]
- ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC]
- ldp w11, w12, [vdso_data, #VDSO_CS_MULT]
- seqcnt_read w9
-
- /* Read the virtual counter. */
- isb
- mrs x15, cntvct_el0
-
- /* Calculate cycle delta and convert to ns. */
- sub x10, x15, x10
- /* We can only guarantee 56 bits of precision. */
- movn x15, #0xff00, lsl #48
- and x10, x15, x10
- mul x10, x10, x11
-
- /* Use the kernel time to calculate the new timespec. */
- mov x11, #NSEC_PER_SEC_LO16
- movk x11, #NSEC_PER_SEC_HI16, lsl #16
- lsl x11, x11, x12
- add x15, x10, x14
- udiv x14, x15, x11
- add x10, x13, x14
- mul x13, x14, x11
- sub x11, x15, x13
-
- ret
- .cfi_endproc
-ENDPROC(__do_get_tspec)
}
. = ALIGN(SEGMENT_ALIGN);
- RO_DATA(PAGE_SIZE) /* everything from this point to */
- EXCEPTION_TABLE(8) /* _etext will be marked RO NX */
+ _etext = .; /* End of text section */
+
+ RO_DATA(PAGE_SIZE) /* everything from this point to */
+ EXCEPTION_TABLE(8) /* __init_begin will be marked RO NX */
NOTES
. = ALIGN(SEGMENT_ALIGN);
- _etext = .; /* End of text and rodata section */
__init_begin = .;
INIT_TEXT_SECTION(8)
run->exit_reason = KVM_EXIT_DEBUG;
run->debug.arch.hsr = hsr;
- switch (hsr >> ESR_ELx_EC_SHIFT) {
+ switch (ESR_ELx_EC(hsr)) {
case ESR_ELx_EC_WATCHPT_LOW:
run->debug.arch.far = vcpu->arch.fault.far_el2;
/* fall through */
static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
{
u32 hsr = kvm_vcpu_get_hsr(vcpu);
- u8 hsr_ec = hsr >> ESR_ELx_EC_SHIFT;
+ u8 hsr_ec = ESR_ELx_EC(hsr);
if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) ||
!arm_exit_handlers[hsr_ec]) {
obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o
+# KVM code is run at a different exception code with a different map, so
+# compiler instrumentation that inserts callbacks or checks into the code may
+# cause crashes. Just disable it.
GCOV_PROFILE := n
KASAN_SANITIZE := n
UBSAN_SANITIZE := n
+KCOV_INSTRUMENT := n
static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
{
u64 esr = read_sysreg_el2(esr);
- u8 ec = esr >> ESR_ELx_EC_SHIFT;
+ u8 ec = ESR_ELx_EC(esr);
u64 hpfar, far;
vcpu->arch.fault.esr_el2 = esr;
.endm
end .req x5
-ENTRY(__copy_from_user)
+ENTRY(__arch_copy_from_user)
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_ALT_PAN_NOT_UAO, \
CONFIG_ARM64_PAN)
add end, x0, x2
CONFIG_ARM64_PAN)
mov x0, #0 // Nothing to copy
ret
-ENDPROC(__copy_from_user)
+ENDPROC(__arch_copy_from_user)
.section .fixup,"ax"
.align 2
.endm
end .req x5
-ENTRY(__copy_to_user)
+ENTRY(__arch_copy_to_user)
ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_ALT_PAN_NOT_UAO, \
CONFIG_ARM64_PAN)
add end, x0, x2
CONFIG_ARM64_PAN)
mov x0, #0
ret
-ENDPROC(__copy_to_user)
+ENDPROC(__arch_copy_to_user)
.section .fixup,"ax"
.align 2
sub x3, x2, #1
bic x4, x0, x3
1:
-USER(9f, dc cvau, x4 ) // clean D line to PoU
+user_alt 9f, "dc cvau, x4", "dc civac, x4", ARM64_WORKAROUND_CLEAN_CACHE
add x4, x4, x2
cmp x4, x1
b.lo 1b
#include <linux/gfp.h>
#include <linux/acpi.h>
+#include <linux/bootmem.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/genalloc.h>
#include <asm/cacheflush.h>
+static int swiotlb __read_mostly;
+
static pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot,
bool coherent)
{
return ret;
}
+static int __swiotlb_dma_supported(struct device *hwdev, u64 mask)
+{
+ if (swiotlb)
+ return swiotlb_dma_supported(hwdev, mask);
+ return 1;
+}
+
static struct dma_map_ops swiotlb_dma_ops = {
.alloc = __dma_alloc,
.free = __dma_free,
.sync_single_for_device = __swiotlb_sync_single_for_device,
.sync_sg_for_cpu = __swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = __swiotlb_sync_sg_for_device,
- .dma_supported = swiotlb_dma_supported,
+ .dma_supported = __swiotlb_dma_supported,
.mapping_error = swiotlb_dma_mapping_error,
};
static int __init arm64_dma_init(void)
{
+ if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
+ swiotlb = 1;
+
return atomic_pool_init();
}
arch_initcall(arm64_dma_init);
{
struct iommu_dma_notifier_data *master, *tmp;
- if (action != BUS_NOTIFY_ADD_DEVICE)
+ if (action != BUS_NOTIFY_BIND_DRIVER)
return 0;
mutex_lock(&iommu_dma_notifier_lock);
list_for_each_entry_safe(master, tmp, &iommu_dma_masters, list) {
- if (do_iommu_attach(master->dev, master->ops,
- master->dma_base, master->size)) {
+ if (data == master->dev && do_iommu_attach(master->dev,
+ master->ops, master->dma_base, master->size)) {
list_del(&master->list);
kfree(master);
+ break;
}
}
mutex_unlock(&iommu_dma_notifier_lock);
if (!nb)
return -ENOMEM;
- /*
- * The device must be attached to a domain before the driver probe
- * routine gets a chance to start allocating DMA buffers. However,
- * the IOMMU driver also needs a chance to configure the iommu_group
- * via its add_device callback first, so we need to make the attach
- * happen between those two points. Since the IOMMU core uses a bus
- * notifier with default priority for add_device, do the same but
- * with a lower priority to ensure the appropriate ordering.
- */
+
nb->notifier_call = __iommu_attach_notifier;
- nb->priority = -100;
ret = bus_register_notifier(bus, nb);
if (ret) {
if (!ret)
ret = register_iommu_dma_ops_notifier(&pci_bus_type);
#endif
-
- /* handle devices queued before this arch_initcall */
- if (!ret)
- __iommu_attach_notifier(NULL, BUS_NOTIFY_ADD_DEVICE, NULL);
return ret;
}
arch_initcall(__iommu_dma_init);
#include <asm/memory.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
-
-struct addr_marker {
- unsigned long start_address;
- const char *name;
-};
+#include <asm/ptdump.h>
static const struct addr_marker address_markers[] = {
#ifdef CONFIG_KASAN
}
}
-static void walk_pgd(struct pg_state *st, struct mm_struct *mm, unsigned long start)
+static void walk_pgd(struct pg_state *st, struct mm_struct *mm,
+ unsigned long start)
{
pgd_t *pgd = pgd_offset(mm, 0UL);
unsigned i;
static int ptdump_show(struct seq_file *m, void *v)
{
+ struct ptdump_info *info = m->private;
struct pg_state st = {
.seq = m,
- .marker = address_markers,
+ .marker = info->markers,
};
- walk_pgd(&st, &init_mm, VA_START);
+ walk_pgd(&st, info->mm, info->base_addr);
note_page(&st, 0, 0, 0);
return 0;
static int ptdump_open(struct inode *inode, struct file *file)
{
- return single_open(file, ptdump_show, NULL);
+ return single_open(file, ptdump_show, inode->i_private);
}
static const struct file_operations ptdump_fops = {
.release = single_release,
};
-static int ptdump_init(void)
+int ptdump_register(struct ptdump_info *info, const char *name)
{
struct dentry *pe;
unsigned i, j;
for (j = 0; j < pg_level[i].num; j++)
pg_level[i].mask |= pg_level[i].bits[j].mask;
- pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL,
- &ptdump_fops);
+ pe = debugfs_create_file(name, 0400, NULL, info, &ptdump_fops);
return pe ? 0 : -ENOMEM;
}
+
+static struct ptdump_info kernel_ptdump_info = {
+ .mm = &init_mm,
+ .markers = address_markers,
+ .base_addr = VA_START,
+};
+
+static int ptdump_init(void)
+{
+ return ptdump_register(&kernel_ptdump_info, "kernel_page_tables");
+}
device_initcall(ptdump_init);
#define VM_FAULT_BADMAP 0x010000
#define VM_FAULT_BADACCESS 0x020000
-#define ESR_LNX_EXEC (1 << 24)
-
static int __do_page_fault(struct mm_struct *mm, unsigned long addr,
unsigned int mm_flags, unsigned long vm_flags,
struct task_struct *tsk)
return fault;
}
-static inline int permission_fault(unsigned int esr)
+static inline bool is_permission_fault(unsigned int esr)
{
- unsigned int ec = (esr & ESR_ELx_EC_MASK) >> ESR_ELx_EC_SHIFT;
+ unsigned int ec = ESR_ELx_EC(esr);
unsigned int fsc_type = esr & ESR_ELx_FSC_TYPE;
return (ec == ESR_ELx_EC_DABT_CUR && fsc_type == ESR_ELx_FSC_PERM);
}
+static bool is_el0_instruction_abort(unsigned int esr)
+{
+ return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_LOW;
+}
+
static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
struct pt_regs *regs)
{
if (user_mode(regs))
mm_flags |= FAULT_FLAG_USER;
- if (esr & ESR_LNX_EXEC) {
+ if (is_el0_instruction_abort(esr)) {
vm_flags = VM_EXEC;
} else if ((esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM)) {
vm_flags = VM_WRITE;
mm_flags |= FAULT_FLAG_WRITE;
}
- if (permission_fault(esr) && (addr < USER_DS)) {
+ if (is_permission_fault(esr) && (addr < USER_DS)) {
if (get_fs() == KERNEL_DS)
die("Accessing user space memory with fs=KERNEL_DS", regs, esr);
static void __init arm64_memory_present(void)
{
struct memblock_region *reg;
- int nid = 0;
for_each_memblock(memory, reg) {
-#ifdef CONFIG_NUMA
- nid = reg->nid;
-#endif
+ int nid = memblock_get_region_node(reg);
+
memory_present(nid, memblock_region_memory_base_pfn(reg),
memblock_region_memory_end_pfn(reg));
}
*/
void __init mem_init(void)
{
- swiotlb_init(1);
+ if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
+ swiotlb_init(1);
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
pr_cont(" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n",
MLG(VMALLOC_START, VMALLOC_END));
pr_cont(" .text : 0x%p" " - 0x%p" " (%6ld KB)\n",
- MLK_ROUNDUP(_text, __start_rodata));
+ MLK_ROUNDUP(_text, _etext));
pr_cont(" .rodata : 0x%p" " - 0x%p" " (%6ld KB)\n",
- MLK_ROUNDUP(__start_rodata, _etext));
+ MLK_ROUNDUP(__start_rodata, __init_begin));
pr_cont(" .init : 0x%p" " - 0x%p" " (%6ld KB)\n",
MLK_ROUNDUP(__init_begin, __init_end));
pr_cont(" .data : 0x%p" " - 0x%p" " (%6ld KB)\n",
void *ptr;
phys = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- BUG_ON(!phys);
/*
* The FIX_{PGD,PUD,PMD} slots may be in active use, but the FIX_PTE
return phys;
}
-/*
- * remap a PMD into pages
- */
-static void split_pmd(pmd_t *pmd, pte_t *pte)
-{
- unsigned long pfn = pmd_pfn(*pmd);
- int i = 0;
-
- do {
- /*
- * Need to have the least restrictive permissions available
- * permissions will be fixed up later
- */
- set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
- pfn++;
- } while (pte++, i++, i < PTRS_PER_PTE);
-}
-
static void alloc_init_pte(pmd_t *pmd, unsigned long addr,
unsigned long end, unsigned long pfn,
pgprot_t prot,
{
pte_t *pte;
- if (pmd_none(*pmd) || pmd_sect(*pmd)) {
+ BUG_ON(pmd_sect(*pmd));
+ if (pmd_none(*pmd)) {
phys_addr_t pte_phys;
BUG_ON(!pgtable_alloc);
pte_phys = pgtable_alloc();
pte = pte_set_fixmap(pte_phys);
- if (pmd_sect(*pmd))
- split_pmd(pmd, pte);
__pmd_populate(pmd, pte_phys, PMD_TYPE_TABLE);
- flush_tlb_all();
pte_clear_fixmap();
}
BUG_ON(pmd_bad(*pmd));
pte_clear_fixmap();
}
-static void split_pud(pud_t *old_pud, pmd_t *pmd)
-{
- unsigned long addr = pud_pfn(*old_pud) << PAGE_SHIFT;
- pgprot_t prot = __pgprot(pud_val(*old_pud) ^ addr);
- int i = 0;
-
- do {
- set_pmd(pmd, __pmd(addr | pgprot_val(prot)));
- addr += PMD_SIZE;
- } while (pmd++, i++, i < PTRS_PER_PMD);
-}
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-static bool block_mappings_allowed(phys_addr_t (*pgtable_alloc)(void))
-{
-
- /*
- * If debug_page_alloc is enabled we must map the linear map
- * using pages. However, other mappings created by
- * create_mapping_noalloc must use sections in some cases. Allow
- * sections to be used in those cases, where no pgtable_alloc
- * function is provided.
- */
- return !pgtable_alloc || !debug_pagealloc_enabled();
-}
-#else
-static bool block_mappings_allowed(phys_addr_t (*pgtable_alloc)(void))
-{
- return true;
-}
-#endif
-
static void alloc_init_pmd(pud_t *pud, unsigned long addr, unsigned long end,
phys_addr_t phys, pgprot_t prot,
- phys_addr_t (*pgtable_alloc)(void))
+ phys_addr_t (*pgtable_alloc)(void),
+ bool allow_block_mappings)
{
pmd_t *pmd;
unsigned long next;
/*
* Check for initial section mappings in the pgd/pud and remove them.
*/
- if (pud_none(*pud) || pud_sect(*pud)) {
+ BUG_ON(pud_sect(*pud));
+ if (pud_none(*pud)) {
phys_addr_t pmd_phys;
BUG_ON(!pgtable_alloc);
pmd_phys = pgtable_alloc();
pmd = pmd_set_fixmap(pmd_phys);
- if (pud_sect(*pud)) {
- /*
- * need to have the 1G of mappings continue to be
- * present
- */
- split_pud(pud, pmd);
- }
__pud_populate(pud, pmd_phys, PUD_TYPE_TABLE);
- flush_tlb_all();
pmd_clear_fixmap();
}
BUG_ON(pud_bad(*pud));
next = pmd_addr_end(addr, end);
/* try section mapping first */
if (((addr | next | phys) & ~SECTION_MASK) == 0 &&
- block_mappings_allowed(pgtable_alloc)) {
+ allow_block_mappings) {
pmd_t old_pmd =*pmd;
pmd_set_huge(pmd, phys, prot);
/*
static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
phys_addr_t phys, pgprot_t prot,
- phys_addr_t (*pgtable_alloc)(void))
+ phys_addr_t (*pgtable_alloc)(void),
+ bool allow_block_mappings)
{
pud_t *pud;
unsigned long next;
/*
* For 4K granule only, attempt to put down a 1GB block
*/
- if (use_1G_block(addr, next, phys) &&
- block_mappings_allowed(pgtable_alloc)) {
+ if (use_1G_block(addr, next, phys) && allow_block_mappings) {
pud_t old_pud = *pud;
pud_set_huge(pud, phys, prot);
}
} else {
alloc_init_pmd(pud, addr, next, phys, prot,
- pgtable_alloc);
+ pgtable_alloc, allow_block_mappings);
}
phys += next - addr;
} while (pud++, addr = next, addr != end);
pud_clear_fixmap();
}
-/*
- * Create the page directory entries and any necessary page tables for the
- * mapping specified by 'md'.
- */
-static void init_pgd(pgd_t *pgd, phys_addr_t phys, unsigned long virt,
- phys_addr_t size, pgprot_t prot,
- phys_addr_t (*pgtable_alloc)(void))
+static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
+ unsigned long virt, phys_addr_t size,
+ pgprot_t prot,
+ phys_addr_t (*pgtable_alloc)(void),
+ bool allow_block_mappings)
{
unsigned long addr, length, end, next;
+ pgd_t *pgd = pgd_offset_raw(pgdir, virt);
/*
* If the virtual and physical address don't have the same offset
end = addr + length;
do {
next = pgd_addr_end(addr, end);
- alloc_init_pud(pgd, addr, next, phys, prot, pgtable_alloc);
+ alloc_init_pud(pgd, addr, next, phys, prot, pgtable_alloc,
+ allow_block_mappings);
phys += next - addr;
} while (pgd++, addr = next, addr != end);
}
return __pa(ptr);
}
-static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
- unsigned long virt, phys_addr_t size,
- pgprot_t prot,
- phys_addr_t (*alloc)(void))
-{
- init_pgd(pgd_offset_raw(pgdir, virt), phys, virt, size, prot, alloc);
-}
-
/*
* This function can only be used to modify existing table entries,
* without allocating new levels of table. Note that this permits the
&phys, virt);
return;
}
- __create_pgd_mapping(init_mm.pgd, phys, virt, size, prot,
- NULL);
+ __create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL, true);
}
void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
unsigned long virt, phys_addr_t size,
- pgprot_t prot)
+ pgprot_t prot, bool allow_block_mappings)
{
__create_pgd_mapping(mm->pgd, phys, virt, size, prot,
- late_pgtable_alloc);
+ late_pgtable_alloc, allow_block_mappings);
}
static void create_mapping_late(phys_addr_t phys, unsigned long virt,
}
__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot,
- late_pgtable_alloc);
+ late_pgtable_alloc, !debug_pagealloc_enabled());
}
static void __init __map_memblock(pgd_t *pgd, phys_addr_t start, phys_addr_t end)
{
unsigned long kernel_start = __pa(_text);
- unsigned long kernel_end = __pa(_etext);
+ unsigned long kernel_end = __pa(__init_begin);
/*
* Take care not to create a writable alias for the
* read-only text and rodata sections of the kernel image.
*/
- /* No overlap with the kernel text */
+ /* No overlap with the kernel text/rodata */
if (end < kernel_start || start >= kernel_end) {
__create_pgd_mapping(pgd, start, __phys_to_virt(start),
end - start, PAGE_KERNEL,
- early_pgtable_alloc);
+ early_pgtable_alloc,
+ !debug_pagealloc_enabled());
return;
}
/*
- * This block overlaps the kernel text mapping.
+ * This block overlaps the kernel text/rodata mappings.
* Map the portion(s) which don't overlap.
*/
if (start < kernel_start)
__create_pgd_mapping(pgd, start,
__phys_to_virt(start),
kernel_start - start, PAGE_KERNEL,
- early_pgtable_alloc);
+ early_pgtable_alloc,
+ !debug_pagealloc_enabled());
if (kernel_end < end)
__create_pgd_mapping(pgd, kernel_end,
__phys_to_virt(kernel_end),
end - kernel_end, PAGE_KERNEL,
- early_pgtable_alloc);
+ early_pgtable_alloc,
+ !debug_pagealloc_enabled());
/*
- * Map the linear alias of the [_text, _etext) interval as
+ * Map the linear alias of the [_text, __init_begin) interval as
* read-only/non-executable. This makes the contents of the
* region accessible to subsystems such as hibernate, but
* protects it from inadvertent modification or execution.
*/
__create_pgd_mapping(pgd, kernel_start, __phys_to_virt(kernel_start),
kernel_end - kernel_start, PAGE_KERNEL_RO,
- early_pgtable_alloc);
+ early_pgtable_alloc, !debug_pagealloc_enabled());
}
static void __init map_mem(pgd_t *pgd)
{
unsigned long section_size;
- section_size = (unsigned long)__start_rodata - (unsigned long)_text;
+ section_size = (unsigned long)_etext - (unsigned long)_text;
create_mapping_late(__pa(_text), (unsigned long)_text,
section_size, PAGE_KERNEL_ROX);
/*
- * mark .rodata as read only. Use _etext rather than __end_rodata to
- * cover NOTES and EXCEPTION_TABLE.
+ * mark .rodata as read only. Use __init_begin rather than __end_rodata
+ * to cover NOTES and EXCEPTION_TABLE.
*/
- section_size = (unsigned long)_etext - (unsigned long)__start_rodata;
+ section_size = (unsigned long)__init_begin - (unsigned long)__start_rodata;
create_mapping_late(__pa(__start_rodata), (unsigned long)__start_rodata,
section_size, PAGE_KERNEL_RO);
}
BUG_ON(!PAGE_ALIGNED(size));
__create_pgd_mapping(pgd, pa_start, (unsigned long)va_start, size, prot,
- early_pgtable_alloc);
+ early_pgtable_alloc, !debug_pagealloc_enabled());
vma->addr = va_start;
vma->phys_addr = pa_start;
{
static struct vm_struct vmlinux_text, vmlinux_rodata, vmlinux_init, vmlinux_data;
- map_kernel_segment(pgd, _text, __start_rodata, PAGE_KERNEL_EXEC, &vmlinux_text);
- map_kernel_segment(pgd, __start_rodata, _etext, PAGE_KERNEL, &vmlinux_rodata);
+ map_kernel_segment(pgd, _text, _etext, PAGE_KERNEL_EXEC, &vmlinux_text);
+ map_kernel_segment(pgd, __start_rodata, __init_begin, PAGE_KERNEL, &vmlinux_rodata);
map_kernel_segment(pgd, __init_begin, __init_end, PAGE_KERNEL_EXEC,
&vmlinux_init);
map_kernel_segment(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data);
msr cpacr_el1, x0 // Enable FP/ASIMD
mov x0, #1 << 12 // Reset mdscr_el1 and disable
msr mdscr_el1, x0 // access to the DCC from EL0
+ isb // Unmask debug exceptions now,
+ enable_dbg // since this is per-cpu
reset_pmuserenr_el0 x0 // Disable PMU access from EL0
/*
* Memory region attributes for LPAE:
irq = platform_get_irq(pmu_device, 0);
if (irq >= 0 && irq_is_percpu(irq)) {
- on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1);
+ on_each_cpu_mask(&cpu_pmu->supported_cpus,
+ cpu_pmu_disable_percpu_irq, &irq, 1);
free_percpu_irq(irq, &hw_events->percpu_pmu);
} else {
for (i = 0; i < irqs; ++i) {
irq);
return err;
}
- on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1);
+
+ on_each_cpu_mask(&cpu_pmu->supported_cpus,
+ cpu_pmu_enable_percpu_irq, &irq, 1);
} else {
for (i = 0; i < irqs; ++i) {
int cpu = i;
i++;
} while (1);
- /* If we didn't manage to parse anything, claim to support all CPUs */
- if (cpumask_weight(&pmu->supported_cpus) == 0)
- cpumask_setall(&pmu->supported_cpus);
+ /* If we didn't manage to parse anything, try the interrupt affinity */
+ if (cpumask_weight(&pmu->supported_cpus) == 0) {
+ if (!using_spi) {
+ /* If using PPIs, check the affinity of the partition */
+ int ret, irq;
+
+ irq = platform_get_irq(pdev, 0);
+ ret = irq_get_percpu_devid_partition(irq, &pmu->supported_cpus);
+ if (ret) {
+ kfree(irqs);
+ return ret;
+ }
+ } else {
+ /* Otherwise default to all CPUs */
+ cpumask_setall(&pmu->supported_cpus);
+ }
+ }
/* If we matched up the IRQ affinities, use them to route the SPIs */
if (using_spi && i == pdev->num_resources)
#define KEXEC_ARCH_SH (42 << 16)
#define KEXEC_ARCH_MIPS_LE (10 << 16)
#define KEXEC_ARCH_MIPS ( 8 << 16)
+#define KEXEC_ARCH_AARCH64 (183 << 16)
/* The artificial cap on the number of segments passed to kexec_load. */
#define KEXEC_SEGMENT_MAX 16
projects / cascardo / linux.git / commitdiff