F: drivers/net/ethernet/marvell/sk*
MARVELL LIBERTAS WIRELESS DRIVER
-M: Dan Williams <dcbw@redhat.com>
L: libertas-dev@lists.infradead.org
-S: Maintained
+S: Orphan
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
F: include/uapi/linux/netdevice.h
NETXEN (1/10) GbE SUPPORT
+M: Manish Chopra <manish.chopra@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
L: netdev@vger.kernel.org
#ifdef CONFIG_BLK_DEV_INITRD
-/*
- * Note that the kernel can potentially support other compression
- * techniques than gz, though we don't do so by default. If we ever
- * decide to do so we can either look for other filename extensions,
- * or just allow a file with this name to be compressed with an
- * arbitrary compressor (somewhat counterintuitively).
- */
static int __initdata set_initramfs_file;
-static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+static char __initdata initramfs_file[128] = "initramfs";
static int __init setup_initramfs_file(char *str)
{
early_param("initramfs_file", setup_initramfs_file);
/*
- * We look for an "initramfs.cpio.gz" file in the hvfs.
- * If there is one, we allocate some memory for it and it will be
- * unpacked to the initramfs.
+ * We look for a file called "initramfs" in the hvfs. If there is one, we
+ * allocate some memory for it and it will be unpacked to the initramfs.
+ * If it's compressed, the initd code will uncompress it first.
*/
static void __init load_hv_initrd(void)
{
fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
if (fd == HV_ENOENT) {
- if (set_initramfs_file)
+ if (set_initramfs_file) {
pr_warning("No such hvfs initramfs file '%s'\n",
initramfs_file);
- return;
+ return;
+ } else {
+ /* Try old backwards-compatible name. */
+ fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz");
+ if (fd == HV_ENOENT)
+ return;
+ }
}
BUG_ON(fd < 0);
stat = hv_fs_fstat(fd);
{
struct sk_buff *skb;
- skb = alloc_skb(len, GFP_ATOMIC);
+ skb = alloc_skb(len + MAX_HEADER, GFP_ATOMIC);
if (skb) {
+ skb_reserve(skb, MAX_HEADER);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb->protocol = __constant_htons(ETH_P_AOE);
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+ pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
bond->dev->name, new_value, INT_MAX);
ret = -EINVAL;
goto out;
pr_info("%s: Setting ARP monitoring interval to %d.\n",
bond->dev->name, new_value);
bond->params.arp_interval = new_value;
- if (bond->params.miimon) {
- pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
- bond->dev->name, bond->dev->name);
- bond->params.miimon = 0;
- }
- if (!bond->params.arp_targets[0]) {
- pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
- bond->dev->name);
+ if (new_value) {
+ if (bond->params.miimon) {
+ pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+ bond->dev->name, bond->dev->name);
+ bond->params.miimon = 0;
+ }
+ if (!bond->params.arp_targets[0])
+ pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+ bond->dev->name);
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
* timer will get fired off when the open function
* is called.
*/
- cancel_delayed_work_sync(&bond->mii_work);
- queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->arp_work);
+ } else {
+ cancel_delayed_work_sync(&bond->mii_work);
+ queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ }
}
-
out:
rtnl_unlock();
return ret;
}
if (new_value < 0) {
pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
}
if (new_value < 0) {
pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
- } else {
- pr_info("%s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, new_value);
- bond->params.miimon = new_value;
- if (bond->params.updelay)
- pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
- if (bond->params.downdelay)
- pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
- if (bond->params.arp_interval) {
- pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
- bond->dev->name);
- bond->params.arp_interval = 0;
- if (bond->params.arp_validate) {
- bond->params.arp_validate =
- BOND_ARP_VALIDATE_NONE;
- }
- }
-
- if (bond->dev->flags & IFF_UP) {
- /* If the interface is up, we may need to fire off
- * the MII timer. If the interface is down, the
- * timer will get fired off when the open function
- * is called.
- */
+ }
+ pr_info("%s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, new_value);
+ bond->params.miimon = new_value;
+ if (bond->params.updelay)
+ pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
+ if (bond->params.downdelay)
+ pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
+ if (new_value && bond->params.arp_interval) {
+ pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+ bond->dev->name);
+ bond->params.arp_interval = 0;
+ if (bond->params.arp_validate)
+ bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
+ }
+ if (bond->dev->flags & IFF_UP) {
+ /* If the interface is up, we may need to fire off
+ * the MII timer. If the interface is down, the
+ * timer will get fired off when the open function
+ * is called.
+ */
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->mii_work);
+ } else {
cancel_delayed_work_sync(&bond->arp_work);
queue_delayed_work(bond->wq, &bond->mii_work, 0);
}
config CAN_PEAK_PCMCIA
tristate "PEAK PCAN-PC Card"
depends on PCMCIA
+ depends on HAS_IOPORT
---help---
This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
from PEAK-System (http://www.peak-system.com). To compile this
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
- (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+ (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
* See states on p. 23 of the Datasheet.
*/
if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
- priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
return flag;
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
priv->write_reg(priv, REG_CMR, val);
- priv->read_reg(priv, REG_SR);
+ priv->read_reg(priv, SJA1000_REG_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD 0x00
#define REG_CMR 0x01
-#define REG_SR 0x02
+#define SJA1000_REG_SR 0x02
#define REG_IR 0x03
#define REG_IER 0x04
#define REG_ALC 0x0B
struct atl1e_hw hw;
struct atl1e_hw_stats hw_stats;
- bool have_msi;
u32 wol;
u16 link_speed;
u16 link_duplex;
struct net_device *netdev = adapter->netdev;
free_irq(adapter->pdev->irq, netdev);
-
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
}
static int atl1e_request_irq(struct atl1e_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct net_device *netdev = adapter->netdev;
- int flags = 0;
int err = 0;
- adapter->have_msi = true;
- err = pci_enable_msi(pdev);
- if (err) {
- netdev_dbg(netdev,
- "Unable to allocate MSI interrupt Error: %d\n", err);
- adapter->have_msi = false;
- }
-
- if (!adapter->have_msi)
- flags |= IRQF_SHARED;
- err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev);
+ err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name,
+ netdev);
if (err) {
netdev_dbg(adapter->netdev,
"Unable to allocate interrupt Error: %d\n", err);
- if (adapter->have_msi)
- pci_disable_msi(pdev);
return err;
}
netdev_dbg(netdev, "atl1e_request_irq OK\n");
if (j + len > block_end)
goto partno;
- memcpy(tp->fw_ver, &vpd_data[j], len);
- strncat(tp->fw_ver, " bc ", vpdlen - len - 1);
+ if (len >= sizeof(tp->fw_ver))
+ len = sizeof(tp->fw_ver) - 1;
+ memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
+ snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len,
+ &vpd_data[j]);
}
partno:
#define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
/* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */
#define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */
#define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS);
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA);
+ /* Mask power mgt interrupt */
+ writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT);
+
/* XGMAC requires AXI bus init. This is a 'magic number' for now */
writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS);
struct sk_buff *skb;
int frame_len;
+ if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ))
+ break;
+
entry = priv->rx_tail;
p = priv->dma_rx + entry;
if (desc_get_owner(p))
unsigned int pmt = 0;
if (mode & WAKE_MAGIC)
- pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT;
+ pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN;
if (mode & WAKE_UCAST)
pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST;
tmp = readl(reg);
}
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+ if (db->in_suspend)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+/* Read a word from phyxcer */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int reg_save;
+ int ret;
+
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Issue phyxcer read command */
+ iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait read complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+
+ /* The read data keeps on REG_0D & REG_0E */
+ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
+
+ dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
+ return ret;
+}
+
+/* Write a word to phyxcer */
+static void
+dm9000_phy_write(struct net_device *dev,
+ int phyaddr_unused, int reg, int value)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned long reg_save;
+
+ dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ iow(db, DM9000_EPDRL, value);
+ iow(db, DM9000_EPDRH, value >> 8);
+
+ /* Issue phyxcer write command */
+ iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait write complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ mutex_unlock(&db->addr_lock);
+}
+
/* dm9000_set_io
*
* select the specified set of io routines to use with the
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */
+
ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
/* if wol is needed, then always set NCR_WAKEEN otherwise we end
return 0;
}
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
- if (db->in_suspend)
- mdelay(ms);
- else
- msleep(ms);
-}
-
-/*
- * Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned int reg_save;
- int ret;
-
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- dm9000_msleep(db, 1); /* Wait read complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
-
- /* The read data keeps on REG_0D & REG_0E */
- ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- mutex_unlock(&db->addr_lock);
-
- dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
- return ret;
-}
-
-/*
- * Write a word to phyxcer
- */
-static void
-dm9000_phy_write(struct net_device *dev,
- int phyaddr_unused, int reg, int value)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned long reg_save;
-
- dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- /* Fill the written data into REG_0D & REG_0E */
- iow(db, DM9000_EPDRL, value);
- iow(db, DM9000_EPDRH, value >> 8);
-
- iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock, flags);
-
- dm9000_msleep(db, 1); /* Wait write complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
-
- spin_unlock_irqrestore(&db->lock, flags);
- mutex_unlock(&db->addr_lock);
-}
-
static void
dm9000_shutdown(struct net_device *dev)
{
db->flags |= DM9000_PLATF_SIMPLE_PHY;
#endif
- dm9000_reset(db);
+ /* Fixing bug on dm9000_probe, takeover dm9000_reset(db),
+ * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo
+ * while probe stage.
+ */
+
+ iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST);
/* try multiple times, DM9000 sometimes gets the read wrong */
for (i = 0; i < 8; i++) {
#define NCR_WAKEEN (1<<6)
#define NCR_FCOL (1<<4)
#define NCR_FDX (1<<3)
-#define NCR_LBK (3<<1)
+
+#define NCR_RESERVED (3<<1)
+#define NCR_MAC_LBK (1<<1)
#define NCR_RST (1<<0)
#define NSR_SPEED (1<<7)
#define ISR_LNKCHNG (1<<5)
#define ISR_UNDERRUN (1<<4)
+/* Davicom MII registers.
+ */
+
+#define MII_DM_DSPCR 0x1b /* DSP Control Register */
+
+#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */
+
#endif /* _DM9000X_H_ */
return NETDEV_TX_OK;
}
+/* Init RX & TX buffer descriptors
+ */
+static void fec_enet_bd_init(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ struct bufdesc *bdp;
+ unsigned int i;
+
+ /* Initialize the receive buffer descriptors. */
+ bdp = fep->rx_bd_base;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ if (bdp->cbd_bufaddr)
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+ else
+ bdp->cbd_sc = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ fep->cur_rx = fep->rx_bd_base;
+
+ /* ...and the same for transmit */
+ bdp = fep->tx_bd_base;
+ fep->cur_tx = bdp;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ bdp->cbd_sc = 0;
+ if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) {
+ dev_kfree_skb_any(fep->tx_skbuff[i]);
+ fep->tx_skbuff[i] = NULL;
+ }
+ bdp->cbd_bufaddr = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+ fep->dirty_tx = bdp;
+}
+
/* This function is called to start or restart the FEC during a link
* change. This only happens when switching between half and full
* duplex.
/* Set maximum receive buffer size. */
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
+ fec_enet_bd_init(ndev);
+
/* Set receive and transmit descriptor base. */
writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
if (fep->bufdesc_ex)
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc)
* RX_RING_SIZE, fep->hwp + FEC_X_DES_START);
- fep->cur_rx = fep->rx_bd_base;
for (i = 0; i <= TX_RING_MOD_MASK; i++) {
if (fep->tx_skbuff[i]) {
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct bufdesc *cbd_base;
- struct bufdesc *bdp;
- unsigned int i;
/* Allocate memory for buffer descriptors. */
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
return -ENOMEM;
}
+ memset(cbd_base, 0, PAGE_SIZE);
spin_lock_init(&fep->hw_lock);
fep->netdev = ndev;
writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK);
netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT);
- /* Initialize the receive buffer descriptors. */
- bdp = fep->rx_bd_base;
- for (i = 0; i < RX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
-
- /* ...and the same for transmit */
- bdp = fep->tx_bd_base;
- fep->cur_tx = bdp;
- for (i = 0; i < TX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp->cbd_bufaddr = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
- fep->dirty_tx = bdp;
-
fec_restart(ndev, 0);
return 0;
txdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data, skb->len,
DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) {
+ ret_val = 4;
+ goto err_nomem;
+ }
tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
tx_desc->lower.data = cpu_to_le32(skb->len);
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
GFP_KERNEL);
if (!rxdr->buffer_info) {
- ret_val = 4;
+ ret_val = 5;
goto err_nomem;
}
rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
GFP_KERNEL);
if (!rxdr->desc) {
- ret_val = 5;
+ ret_val = 6;
goto err_nomem;
}
memset(rxdr->desc, 0, rxdr->size);
skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
if (!skb) {
- ret_val = 6;
+ ret_val = 7;
goto err_nomem;
}
skb_reserve(skb, NET_IP_ALIGN);
rxdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data,
E1000_RXBUFFER_2048, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) {
+ ret_val = 8;
+ goto err_nomem;
+ }
rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
memset(skb->data, 0x00, skb->len);
}
}
}
- if (!buffer_info->dma)
+ if (!buffer_info->dma) {
buffer_info->dma = dma_map_page(&pdev->dev,
buffer_info->page, 0,
PAGE_SIZE,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
skb->data,
adapter->rx_buffer_len,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
rx_desc = IXGB_RX_DESC(*rx_ring, i);
rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
rx_desc->status = 0;
- if (++i == rx_ring->count) i = 0;
+ if (++i == rx_ring->count)
+ i = 0;
buffer_info = &rx_ring->buffer_info[i];
}
sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
- tp = space - 2048/8;
+ tp = space - 8192/8;
sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
} else {
GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */
GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */
-#define GMAC_DEF_MSK GM_IS_TX_FF_UR
+#define GMAC_DEF_MSK (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR)
};
/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
for (; rxfc != 0; rxfc--) {
rxh = ks8851_rdreg32(ks, KS_RXFHSR);
rxstat = rxh & 0xffff;
- rxlen = rxh >> 16;
+ rxlen = (rxh >> 16) & 0xfff;
netif_dbg(ks, rx_status, ks->netdev,
"rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen);
if (felic_stat & ECSR_LCHNG) {
/* Link Changed */
if (mdp->cd->no_psr || mdp->no_ether_link) {
- if (mdp->link == PHY_DOWN)
- link_stat = 0;
- else
- link_stat = PHY_ST_LINK;
+ goto ignore_link;
} else {
link_stat = (sh_eth_read(ndev, PSR));
if (mdp->ether_link_active_low)
}
}
+ignore_link:
if (intr_status & EESR_TWB) {
/* Write buck end. unused write back interrupt */
if (intr_status & EESR_TABT) /* Transmit Abort int */
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
irqreturn_t ret = IRQ_NONE;
- u32 intr_status = 0;
+ unsigned long intr_status;
spin_lock(&mdp->lock);
- /* Get interrpt stat */
+ /* Get interrupt status */
intr_status = sh_eth_read(ndev, EESR);
+ /* Mask it with the interrupt mask, forcing ECI interrupt to be always
+ * enabled since it's the one that comes thru regardless of the mask,
+ * and we need to fully handle it in sh_eth_error() in order to quench
+ * it as it doesn't get cleared by just writing 1 to the ECI bit...
+ */
+ intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI;
/* Clear interrupt */
if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
struct phy_device *phydev = mdp->phydev;
int new_state = 0;
- if (phydev->link != PHY_DOWN) {
+ if (phydev->link) {
if (phydev->duplex != mdp->duplex) {
new_state = 1;
mdp->duplex = phydev->duplex;
if (mdp->cd->set_rate)
mdp->cd->set_rate(ndev);
}
- if (mdp->link == PHY_DOWN) {
+ if (!mdp->link) {
sh_eth_write(ndev,
(sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
new_state = 1;
mdp->link = phydev->link;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_enable(ndev);
}
} else if (mdp->link) {
new_state = 1;
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_disable(ndev);
}
if (new_state && netif_msg_link(mdp))
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
mdp->mii_bus->id , mdp->phy_id);
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
u32 phy_id; /* PHY ID */
struct mii_bus *mii_bus; /* MDIO bus control */
struct phy_device *phydev; /* PHY device control */
- enum phy_state link;
+ int link;
phy_interface_t phy_interface;
int msg_enable;
int speed;
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
cpts_tx_timestamp(priv->cpts, skb);
priv->stats.tx_packets++;
priv->stats.tx_bytes += len;
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += len;
dev_kfree_skb_any(skb);
static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
{
struct usbnet *dev = netdev_priv(netdev);
+ int ret;
+
+ if (new_mtu > MAX_SINGLE_PACKET_SIZE)
+ return -EINVAL;
- int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+ ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set mac rx frame length\n");
return ret;
netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
- ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+ ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set max rx frame length\n");
return ret;
else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
dev->net->stats.rx_frame_errors++;
} else {
- /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
- if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+ /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
+ if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
netif_dbg(dev, rx_err, dev->net,
"size err rx_cmd_a=0x%08x\n",
rx_cmd_a);
{
struct ath_softc *sc = (struct ath_softc *)data;
- ieee80211_queue_work(sc->hw, &sc->hw_check_work);
+ if (!test_bit(SC_OP_INVALID, &sc->sc_flags))
+ ieee80211_queue_work(sc->hw, &sc->hw_check_work);
}
/*
const struct b43_dma_ops *ops;
struct b43_dmaring *ring;
struct b43_dmadesc_meta *meta;
+ static const struct b43_txstatus fake; /* filled with 0 */
+ const struct b43_txstatus *txstat;
int slot, firstused;
bool frame_succeed;
+ int skip;
+ static u8 err_out1, err_out2;
ring = parse_cookie(dev, status->cookie, &slot);
if (unlikely(!ring))
firstused = ring->current_slot - ring->used_slots + 1;
if (firstused < 0)
firstused = ring->nr_slots + firstused;
+
+ skip = 0;
if (unlikely(slot != firstused)) {
/* This possibly is a firmware bug and will result in
- * malfunction, memory leaks and/or stall of DMA functionality. */
- b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. "
- "Expected %d, but got %d\n",
- ring->index, firstused, slot);
- return;
+ * malfunction, memory leaks and/or stall of DMA functionality.
+ */
+ if (slot == next_slot(ring, next_slot(ring, firstused))) {
+ /* If a single header/data pair was missed, skip over
+ * the first two slots in an attempt to recover.
+ */
+ slot = firstused;
+ skip = 2;
+ if (!err_out1) {
+ /* Report the error once. */
+ b43dbg(dev->wl,
+ "Skip on DMA ring %d slot %d.\n",
+ ring->index, slot);
+ err_out1 = 1;
+ }
+ } else {
+ /* More than a single header/data pair were missed.
+ * Report this error once.
+ */
+ if (!err_out2)
+ b43dbg(dev->wl,
+ "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n",
+ ring->index, firstused, slot);
+ err_out2 = 1;
+ return;
+ }
}
ops = ring->ops;
slot, firstused, ring->index);
break;
}
+
if (meta->skb) {
struct b43_private_tx_info *priv_info =
- b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
+ b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
- unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+ unmap_descbuffer(ring, meta->dmaaddr,
+ meta->skb->len, 1);
kfree(priv_info->bouncebuffer);
priv_info->bouncebuffer = NULL;
} else {
struct ieee80211_tx_info *info;
if (unlikely(!meta->skb)) {
- /* This is a scatter-gather fragment of a frame, so
- * the skb pointer must not be NULL. */
+ /* This is a scatter-gather fragment of a frame,
+ * so the skb pointer must not be NULL.
+ */
b43dbg(dev->wl, "TX status unexpected NULL skb "
"at slot %d (first=%d) on ring %d\n",
slot, firstused, ring->index);
/*
* Call back to inform the ieee80211 subsystem about
- * the status of the transmission.
+ * the status of the transmission. When skipping over
+ * a missed TX status report, use a status structure
+ * filled with zeros to indicate that the frame was not
+ * sent (frame_count 0) and not acknowledged
*/
- frame_succeed = b43_fill_txstatus_report(dev, info, status);
+ if (unlikely(skip))
+ txstat = &fake;
+ else
+ txstat = status;
+
+ frame_succeed = b43_fill_txstatus_report(dev, info,
+ txstat);
#ifdef CONFIG_B43_DEBUG
if (frame_succeed)
ring->nr_succeed_tx_packets++;
/* Everything unmapped and free'd. So it's not used anymore. */
ring->used_slots--;
- if (meta->is_last_fragment) {
+ if (meta->is_last_fragment && !skip) {
/* This is the last scatter-gather
* fragment of the frame. We are done. */
break;
}
slot = next_slot(ring, slot);
+ if (skip > 0)
+ --skip;
}
if (ring->stopped) {
B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
u16 clip_off[2] = { 0xFFFF, 0xFFFF };
u8 vcm_final = 0;
- s8 offset[4];
+ s32 offset[4];
s32 results[8][4] = { };
s32 results_min[4] = { };
s32 poll_results[4] = { };
}
for (i = 0; i < 4; i += 2) {
s32 curr;
- s32 mind = 40;
+ s32 mind = 0x100000;
s32 minpoll = 249;
u8 minvcm = 0;
if (2 * core != i)
u8 regs_save_radio[2];
u16 regs_save_phy[2];
- s8 offset[4];
+ s32 offset[4];
u8 core;
u8 rail;
}
for (i = 0; i < 4; i++) {
- s32 mind = 40;
+ s32 mind = 0x100000;
u8 minvcm = 0;
s32 minpoll = 249;
s32 curr;
gain0_15 = ((biq1 & 0xf) << 12) |
((tia & 0xf) << 8) |
((lna2 & 0x3) << 6) |
- ((lna2 & 0x3) << 4) |
- ((lna1 & 0x3) << 2) |
- ((lna1 & 0x3) << 0);
+ ((lna2 &
+ 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0);
mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0);
mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0);
}
mod_phy_reg(pi, 0x44d, (0x1 << 0), (!trsw) << 0);
- mod_phy_reg(pi, 0x4b1, (0x3 << 11), lna1 << 11);
- mod_phy_reg(pi, 0x4e6, (0x3 << 3), lna1 << 3);
}
return (iq_est.i_pwr + iq_est.q_pwr) / nsamples;
}
-static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain,
- u16 tia_gain, u16 lna2_gain)
-{
- u32 i_thresh_l, q_thresh_l;
- u32 i_thresh_h, q_thresh_h;
- struct lcnphy_iq_est iq_est_h, iq_est_l;
-
- wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain,
- lna2_gain, 0);
-
- wlc_lcnphy_rx_gain_override_enable(pi, true);
- wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l))
- return false;
-
- wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h))
- return false;
-
- i_thresh_l = (iq_est_l.i_pwr << 1);
- i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr;
-
- q_thresh_l = (iq_est_l.q_pwr << 1);
- q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr;
- if ((iq_est_h.i_pwr > i_thresh_l) &&
- (iq_est_h.i_pwr < i_thresh_h) &&
- (iq_est_h.q_pwr > q_thresh_l) &&
- (iq_est_h.q_pwr < q_thresh_h))
- return true;
-
- return false;
-}
-
static bool
wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
const struct lcnphy_rx_iqcomp *iqcomp,
RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
rfoverride3_old, rfoverride3val_old, rfoverride4_old,
rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
- int tia_gain, lna2_gain, biq1_gain;
- bool set_gain;
+ int tia_gain;
+ u32 received_power, rx_pwr_threshold;
u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl;
u16 values_to_save[11];
s16 *ptr;
goto cal_done;
}
- WARN_ON(module != 1);
- tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
- wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
-
- for (i = 0; i < 11; i++)
- values_to_save[i] =
- read_radio_reg(pi, rxiq_cal_rf_reg[i]);
- Core1TxControl_old = read_phy_reg(pi, 0x631);
-
- or_phy_reg(pi, 0x631, 0x0015);
-
- RFOverride0_old = read_phy_reg(pi, 0x44c);
- RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
- rfoverride2_old = read_phy_reg(pi, 0x4b0);
- rfoverride2val_old = read_phy_reg(pi, 0x4b1);
- rfoverride3_old = read_phy_reg(pi, 0x4f9);
- rfoverride3val_old = read_phy_reg(pi, 0x4fa);
- rfoverride4_old = read_phy_reg(pi, 0x938);
- rfoverride4val_old = read_phy_reg(pi, 0x939);
- afectrlovr_old = read_phy_reg(pi, 0x43b);
- afectrlovrval_old = read_phy_reg(pi, 0x43c);
- old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
- old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
-
- tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
- if (tx_gain_override_old) {
- wlc_lcnphy_get_tx_gain(pi, &old_gains);
- tx_gain_index_old = pi_lcn->lcnphy_current_index;
- }
-
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
+ if (module == 1) {
- mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
+ tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
- mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
+ for (i = 0; i < 11; i++)
+ values_to_save[i] =
+ read_radio_reg(pi, rxiq_cal_rf_reg[i]);
+ Core1TxControl_old = read_phy_reg(pi, 0x631);
+
+ or_phy_reg(pi, 0x631, 0x0015);
+
+ RFOverride0_old = read_phy_reg(pi, 0x44c);
+ RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
+ rfoverride2_old = read_phy_reg(pi, 0x4b0);
+ rfoverride2val_old = read_phy_reg(pi, 0x4b1);
+ rfoverride3_old = read_phy_reg(pi, 0x4f9);
+ rfoverride3val_old = read_phy_reg(pi, 0x4fa);
+ rfoverride4_old = read_phy_reg(pi, 0x938);
+ rfoverride4val_old = read_phy_reg(pi, 0x939);
+ afectrlovr_old = read_phy_reg(pi, 0x43b);
+ afectrlovrval_old = read_phy_reg(pi, 0x43c);
+ old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
+ old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
+
+ tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
+ if (tx_gain_override_old) {
+ wlc_lcnphy_get_tx_gain(pi, &old_gains);
+ tx_gain_index_old = pi_lcn->lcnphy_current_index;
+ }
- write_radio_reg(pi, RADIO_2064_REG116, 0x06);
- write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
- write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
- write_radio_reg(pi, RADIO_2064_REG098, 0x03);
- write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
- mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
- write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
- write_radio_reg(pi, RADIO_2064_REG114, 0x01);
- write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
- write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
-
- mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
- mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
- mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
- mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
+ mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
- write_phy_reg(pi, 0x6da, 0xffff);
- or_phy_reg(pi, 0x6db, 0x3);
+ mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
- wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
- set_gain = false;
-
- lna2_gain = 3;
- while ((lna2_gain >= 0) && !set_gain) {
- tia_gain = 4;
-
- while ((tia_gain >= 0) && !set_gain) {
- biq1_gain = 6;
-
- while ((biq1_gain >= 0) && !set_gain) {
- set_gain = wlc_lcnphy_rx_iq_cal_gain(pi,
- (u16)
- biq1_gain,
- (u16)
- tia_gain,
- (u16)
- lna2_gain);
- biq1_gain -= 1;
- }
+ write_radio_reg(pi, RADIO_2064_REG116, 0x06);
+ write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
+ write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
+ write_radio_reg(pi, RADIO_2064_REG098, 0x03);
+ write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
+ mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
+ write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG114, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
+ write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
+
+ mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
+ mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
+ mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
+
+ mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
+
+ wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
+ write_phy_reg(pi, 0x6da, 0xffff);
+ or_phy_reg(pi, 0x6db, 0x3);
+ wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
+ wlc_lcnphy_rx_gain_override_enable(pi, true);
+
+ tia_gain = 8;
+ rx_pwr_threshold = 950;
+ while (tia_gain > 0) {
tia_gain -= 1;
+ wlc_lcnphy_set_rx_gain_by_distribution(pi,
+ 0, 0, 2, 2,
+ (u16)
+ tia_gain, 1, 0);
+ udelay(500);
+
+ received_power =
+ wlc_lcnphy_measure_digital_power(pi, 2000);
+ if (received_power < rx_pwr_threshold)
+ break;
}
- lna2_gain -= 1;
- }
+ result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
- if (set_gain)
- result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024);
- else
- result = false;
+ wlc_lcnphy_stop_tx_tone(pi);
- wlc_lcnphy_stop_tx_tone(pi);
+ write_phy_reg(pi, 0x631, Core1TxControl_old);
- write_phy_reg(pi, 0x631, Core1TxControl_old);
-
- write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
- write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
- write_phy_reg(pi, 0x4b0, rfoverride2_old);
- write_phy_reg(pi, 0x4b1, rfoverride2val_old);
- write_phy_reg(pi, 0x4f9, rfoverride3_old);
- write_phy_reg(pi, 0x4fa, rfoverride3val_old);
- write_phy_reg(pi, 0x938, rfoverride4_old);
- write_phy_reg(pi, 0x939, rfoverride4val_old);
- write_phy_reg(pi, 0x43b, afectrlovr_old);
- write_phy_reg(pi, 0x43c, afectrlovrval_old);
- write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
- write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
+ write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x4b0, rfoverride2_old);
+ write_phy_reg(pi, 0x4b1, rfoverride2val_old);
+ write_phy_reg(pi, 0x4f9, rfoverride3_old);
+ write_phy_reg(pi, 0x4fa, rfoverride3val_old);
+ write_phy_reg(pi, 0x938, rfoverride4_old);
+ write_phy_reg(pi, 0x939, rfoverride4val_old);
+ write_phy_reg(pi, 0x43b, afectrlovr_old);
+ write_phy_reg(pi, 0x43c, afectrlovrval_old);
+ write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
+ write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
- wlc_lcnphy_clear_trsw_override(pi);
+ wlc_lcnphy_clear_trsw_override(pi);
- mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
+ mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
- for (i = 0; i < 11; i++)
- write_radio_reg(pi, rxiq_cal_rf_reg[i],
- values_to_save[i]);
+ for (i = 0; i < 11; i++)
+ write_radio_reg(pi, rxiq_cal_rf_reg[i],
+ values_to_save[i]);
- if (tx_gain_override_old)
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
- else
- wlc_lcnphy_disable_tx_gain_override(pi);
+ if (tx_gain_override_old)
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
+ else
+ wlc_lcnphy_disable_tx_gain_override(pi);
- wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
- wlc_lcnphy_rx_gain_override_enable(pi, false);
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
+ wlc_lcnphy_rx_gain_override_enable(pi, false);
+ }
cal_done:
kfree(ptr);
write_radio_reg(pi, RADIO_2064_REG038, 3);
write_radio_reg(pi, RADIO_2064_REG091, 7);
}
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc,
- 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0};
-
- write_radio_reg(pi, RADIO_2064_REG02A, 0xf);
- write_radio_reg(pi, RADIO_2064_REG091, 0x3);
- write_radio_reg(pi, RADIO_2064_REG038, 0x3);
-
- write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]);
- }
}
static int
} else {
mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1);
- mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7);
- mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1);
- mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4);
}
} else {
mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2);
(auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12));
mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5));
- mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0));
}
static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
{
struct phytbl_info tab;
u32 rfseq, ind;
- u8 tssi_sel;
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4);
- if (pi->sh->boardflags & BFL_FEM) {
- tssi_sel = 0x1;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
- } else {
- tssi_sel = 0xe;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_POST_PA);
- }
+ wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14);
mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15);
mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0);
if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
- mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel);
+ mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe);
mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4);
} else {
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1);
mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3);
}
mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
-
wlc_lcnphy_pwrctrl_rssiparams(pi);
}
read_radio_reg(pi, RADIO_2064_REG007) & 1;
u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10;
u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4;
- u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi);
-
idleTssi = read_phy_reg(pi, 0x4ab);
suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) &
MCTL_EN_MAC));
mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4);
mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2);
wlc_lcnphy_tssi_setup(pi);
-
- mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0));
- mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6));
-
- wlc_lcnphy_set_bbmult(pi, 0x0);
-
wlc_phy_do_dummy_tx(pi, true, OFF);
idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0))
>> 0);
mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12);
- wlc_lcnphy_set_bbmult(pi, SAVE_bbmult);
wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old);
wlc_lcnphy_set_tx_gain(pi, &old_gains);
wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl);
wlc_lcnphy_write_table(pi, &tab);
tab.tbl_offset++;
}
- mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8);
- mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4);
- mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2);
mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7);
target_gains.pad_gain = 21;
target_gains.dac_gain = 0;
wlc_lcnphy_set_tx_gain(pi, &target_gains);
+ wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) {
lcnphy_recal ? LCNPHY_CAL_RECAL :
LCNPHY_CAL_FULL), false);
} else {
- wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
wlc_lcnphy_tx_iqlo_soft_cal_full(pi);
}
if (CHSPEC_IS5G(pi->radio_chanspec))
pa_gain = 0x70;
else
- pa_gain = 0x60;
+ pa_gain = 0x70;
if (pi->sh->boardflags & BFL_FEM)
pa_gain = 0x10;
-
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
tab.tbl_len = 1;
tab.tbl_ptr = &val;
for (j = 0; j < 128; j++) {
- if (pi->sh->boardflags & BFL_FEM)
- gm_gain = gain_table[j].gm;
- else
- gm_gain = 15;
-
+ gm_gain = gain_table[j].gm;
val = (((u32) pa_gain << 24) |
(gain_table[j].pad << 16) |
(gain_table[j].pga << 8) | gm_gain);
write_phy_reg(pi, 0x4ea, 0x4688);
- if (pi->sh->boardflags & BFL_FEM)
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
- else
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0);
+ mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6);
wlc_lcnphy_rcal(pi);
wlc_lcnphy_rc_cal(pi);
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- write_radio_reg(pi, RADIO_2064_REG032, 0x6f);
- write_radio_reg(pi, RADIO_2064_REG033, 0x19);
- write_radio_reg(pi, RADIO_2064_REG039, 0xe);
- }
-
}
static void wlc_lcnphy_radio_init(struct brcms_phy *pi)
wlc_lcnphy_write_table(pi, &tab);
}
- if (!(pi->sh->boardflags & BFL_FEM)) {
- tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
- tab.tbl_width = 16;
- tab.tbl_ptr = &val;
- tab.tbl_len = 1;
+ tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
+ tab.tbl_width = 16;
+ tab.tbl_ptr = &val;
+ tab.tbl_len = 1;
- val = 150;
- tab.tbl_offset = 0;
- wlc_lcnphy_write_table(pi, &tab);
+ val = 114;
+ tab.tbl_offset = 0;
+ wlc_lcnphy_write_table(pi, &tab);
- val = 220;
- tab.tbl_offset = 1;
- wlc_lcnphy_write_table(pi, &tab);
- }
+ val = 130;
+ tab.tbl_offset = 1;
+ wlc_lcnphy_write_table(pi, &tab);
+
+ val = 6;
+ tab.tbl_offset = 8;
+ wlc_lcnphy_write_table(pi, &tab);
if (CHSPEC_IS2G(pi->radio_chanspec)) {
if (pi->sh->boardflags & BFL_FEM)
wlc_lcnphy_load_tx_iir_filter(pi, true, 3);
mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3);
- wlc_lcnphy_tssi_setup(pi);
}
void wlc_phy_detach_lcnphy(struct brcms_phy *pi)
if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
return false;
- if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
+ if ((pi->sh->boardflags & BFL_FEM) &&
+ (LCNREV_IS(pi->pubpi.phy_rev, 1))) {
if (pi_lcn->lcnphy_tempsense_option == 3) {
pi->hwpwrctrl = true;
pi->hwpwrctrl_capable = true;
};
static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = {
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
};
static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = {
int rate_idx;
int i;
u32 rate;
- u8 use_green = il4965_rs_use_green(il, sta);
+ u8 use_green;
u8 active_tbl = 0;
u8 valid_tx_ant;
struct il_station_priv *sta_priv;
if (!sta || !lq_sta)
return;
+ use_green = il4965_rs_use_green(il, sta);
sta_priv = (void *)sta->drv_priv;
i = lq_sta->last_txrate_idx;
return -EIO;
}
+ /*
+ * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag
+ * in iwl_down but cancel the workers only later.
+ */
+ if (!priv->ucode_loaded) {
+ IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id);
+ return -EIO;
+ }
+
/*
* Synchronous commands from this op-mode must hold
* the mutex, this ensures we don't try to send two
return -EIO;
}
+ priv->ucode_loaded = true;
+
if (ucode_type != IWL_UCODE_WOWLAN) {
/* delay a bit to give rfkill time to run */
msleep(5);
return ret;
}
- priv->ucode_loaded = true;
-
return 0;
}
/* If platform's RF_KILL switch is NOT set to KILL */
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill && !run_in_rfkill)
return -ERFKILL;
static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
{
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
bool hw_rfkill;
int err;
iwl_enable_rfkill_int(trans);
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
return 0;
* op_mode.
*/
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
}
}
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
int copy = 0;
- if (!cmd->len)
+ if (!cmd->len[i])
continue;
/* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
}
memcpy(adapter->upld_buf, skb->data,
min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len));
+ skb_push(skb, INTF_HEADER_LEN);
if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
PCI_DMA_FROMDEVICE))
return -1;
fc_exch_init(lport);
fc_rport_init(lport);
fc_disc_init(lport);
+ fc_disc_config(lport, lport);
return 0;
}
}
ctlr = bnx2fc_to_ctlr(interface);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
interface->vlan_id = vlan_id;
interface->timer_work_queue =
goto ifput_err;
}
- lport = bnx2fc_if_create(interface, &interface->hba->pcidev->dev, 0);
+ lport = bnx2fc_if_create(interface, &cdev->dev, 0);
if (!lport) {
printk(KERN_ERR PFX "Failed to create interface (%s)\n",
netdev->name);
/* Make this master N_port */
ctlr->lp = lport;
- cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
-
if (link_state == BNX2FC_CREATE_LINK_UP)
cdev->enabled = FCOE_CTLR_ENABLED;
else
{
struct net_device *netdev = fcoe->netdev;
struct fcoe_ctlr *fip = fcoe_to_ctlr(fcoe);
- struct fcoe_ctlr_device *ctlr_dev = fcoe_ctlr_to_ctlr_dev(fip);
rtnl_lock();
if (!fcoe->removed)
/* tear-down the FCoE controller */
fcoe_ctlr_destroy(fip);
scsi_host_put(fip->lp->host);
- fcoe_ctlr_device_delete(ctlr_dev);
dev_put(netdev);
module_put(THIS_MODULE);
}
*/
static void fcoe_destroy_work(struct work_struct *work)
{
+ struct fcoe_ctlr_device *cdev;
+ struct fcoe_ctlr *ctlr;
struct fcoe_port *port;
struct fcoe_interface *fcoe;
struct Scsi_Host *shost;
mutex_lock(&fcoe_config_mutex);
fcoe = port->priv;
+ ctlr = fcoe_to_ctlr(fcoe);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+
fcoe_if_destroy(port->lport);
fcoe_interface_cleanup(fcoe);
mutex_unlock(&fcoe_config_mutex);
+
+ fcoe_ctlr_device_delete(cdev);
}
/**
rc = -EIO;
rtnl_unlock();
fcoe_interface_cleanup(fcoe);
- goto out_nortnl;
+ mutex_unlock(&fcoe_config_mutex);
+ fcoe_ctlr_device_delete(ctlr_dev);
+ goto out;
}
/* Make this the "master" N_Port */
out_nodev:
rtnl_unlock();
-out_nortnl:
mutex_unlock(&fcoe_config_mutex);
+out:
return rc;
}
fc_lport_set_local_id(fip->lp, new_port_id);
}
+/**
+ * fcoe_ctlr_mode_set() - Set or reset the ctlr's mode
+ * @lport: The local port to be (re)configured
+ * @fip: The FCoE controller whose mode is changing
+ * @fip_mode: The new fip mode
+ *
+ * Note that the we shouldn't be changing the libfc discovery settings
+ * (fc_disc_config) while an lport is going through the libfc state
+ * machine. The mode can only be changed when a fcoe_ctlr device is
+ * disabled, so that should ensure that this routine is only called
+ * when nothing is happening.
+ */
+void fcoe_ctlr_mode_set(struct fc_lport *lport, struct fcoe_ctlr *fip,
+ enum fip_state fip_mode)
+{
+ void *priv;
+
+ WARN_ON(lport->state != LPORT_ST_RESET &&
+ lport->state != LPORT_ST_DISABLED);
+
+ if (fip_mode == FIP_MODE_VN2VN) {
+ lport->rport_priv_size = sizeof(struct fcoe_rport);
+ lport->point_to_multipoint = 1;
+ lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
+ lport->tt.disc_start = fcoe_ctlr_disc_start;
+ lport->tt.disc_stop = fcoe_ctlr_disc_stop;
+ lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
+ priv = fip;
+ } else {
+ lport->rport_priv_size = 0;
+ lport->point_to_multipoint = 0;
+ lport->tt.disc_recv_req = NULL;
+ lport->tt.disc_start = NULL;
+ lport->tt.disc_stop = NULL;
+ lport->tt.disc_stop_final = NULL;
+ priv = lport;
+ }
+
+ fc_disc_config(lport, priv);
+}
+
/**
* fcoe_libfc_config() - Sets up libfc related properties for local port
* @lport: The local port to configure libfc for
fc_exch_init(lport);
fc_elsct_init(lport);
fc_lport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN)
- lport->rport_priv_size = sizeof(struct fcoe_rport);
fc_rport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN) {
- lport->point_to_multipoint = 1;
- lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
- lport->tt.disc_start = fcoe_ctlr_disc_start;
- lport->tt.disc_stop = fcoe_ctlr_disc_stop;
- lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
- mutex_init(&lport->disc.disc_mutex);
- INIT_LIST_HEAD(&lport->disc.rports);
- lport->disc.priv = fip;
- } else {
- fc_disc_init(lport);
- }
+ fc_disc_init(lport);
+ fcoe_ctlr_mode_set(lport, fip, fip->mode);
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
{
struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev);
+ struct fc_lport *lport = ctlr->lp;
mutex_lock(&ctlr->ctlr_mutex);
switch (ctlr_dev->mode) {
}
mutex_unlock(&ctlr->ctlr_mutex);
+
+ fcoe_ctlr_mode_set(lport, ctlr, ctlr->mode);
}
EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode);
}
/**
- * fc_disc_init() - Initialize the discovery layer for a local port
- * @lport: The local port that needs the discovery layer to be initialized
+ * fc_disc_config() - Configure the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be configured
+ * @priv: Private data structre for users of the discovery layer
*/
-int fc_disc_init(struct fc_lport *lport)
+void fc_disc_config(struct fc_lport *lport, void *priv)
{
- struct fc_disc *disc;
+ struct fc_disc *disc = &lport->disc;
if (!lport->tt.disc_start)
lport->tt.disc_start = fc_disc_start;
lport->tt.disc_recv_req = fc_disc_recv_req;
disc = &lport->disc;
+
+ disc->priv = priv;
+}
+EXPORT_SYMBOL(fc_disc_config);
+
+/**
+ * fc_disc_init() - Initialize the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be initialized
+ */
+void fc_disc_init(struct fc_lport *lport)
+{
+ struct fc_disc *disc = &lport->disc;
+
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
-
- disc->priv = lport;
-
- return 0;
}
EXPORT_SYMBOL(fc_disc_init);
*
* int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh)
* int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq,
- * struct net_device *dev)
+ * struct net_device *dev, u32 filter_mask)
*
* int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
* Called to change device carrier. Soft-devices (like dummy, team, etc)
/*
* DISCOVERY LAYER
*****************************/
-int fc_disc_init(struct fc_lport *);
+void fc_disc_init(struct fc_lport *);
+void fc_disc_config(struct fc_lport *, void *);
static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
{
}
skb_orphan(skb);
- nf_reset(skb);
if (unlikely(!is_skb_forwardable(dev, skb))) {
atomic_long_inc(&dev->rx_dropped);
if (dev->rx_handler)
return -EBUSY;
+ /* Note: rx_handler_data must be set before rx_handler */
rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
rcu_assign_pointer(dev->rx_handler, rx_handler);
ASSERT_RTNL();
RCU_INIT_POINTER(dev->rx_handler, NULL);
+ /* a reader seeing a non NULL rx_handler in a rcu_read_lock()
+ * section has a guarantee to see a non NULL rx_handler_data
+ * as well.
+ */
+ synchronize_net();
RCU_INIT_POINTER(dev->rx_handler_data, NULL);
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
struct flow_flush_info *info = data;
struct tasklet_struct *tasklet;
- tasklet = this_cpu_ptr(&info->cache->percpu->flush_tasklet);
+ tasklet = &this_cpu_ptr(info->cache->percpu)->flush_tasklet;
tasklet->data = (unsigned long)info;
tasklet_schedule(tasklet);
}
}
if (ops->fill_info) {
data = nla_nest_start(skb, IFLA_INFO_DATA);
- if (data == NULL)
+ if (data == NULL) {
+ err = -EMSGSIZE;
goto err_cancel_link;
+ }
err = ops->fill_info(skb, dev);
if (err < 0)
goto err_cancel_data;
ipv6_addr_loopback(&hdr->daddr))
goto err;
+ /* RFC4291 Errata ID: 3480
+ * Interface-Local scope spans only a single interface on a
+ * node and is useful only for loopback transmission of
+ * multicast. Packets with interface-local scope received
+ * from another node must be discarded.
+ */
+ if (!(skb->pkt_type == PACKET_LOOPBACK ||
+ dev->flags & IFF_LOOPBACK) &&
+ ipv6_addr_is_multicast(&hdr->daddr) &&
+ IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1)
+ goto err;
+
/* RFC4291 2.7
* Nodes must not originate a packet to a multicast address whose scope
* field contains the reserved value 0; if such a packet is received, it
hdr->sadb_msg_pid = c->portid;
hdr->sadb_msg_version = PF_KEY_V2;
hdr->sadb_msg_errno = (uint8_t) 0;
+ hdr->sadb_msg_satype = SADB_SATYPE_UNSPEC;
hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
return 0;
static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
- int ret = 0;
+ int ret;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return 0;
- mutex_lock(&local->iflist_mtx);
+ ASSERT_RTNL();
if (local->monitor_sdata)
- goto out_unlock;
+ return 0;
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
- if (!sdata) {
- ret = -ENOMEM;
- goto out_unlock;
- }
+ if (!sdata)
+ return -ENOMEM;
/* set up data */
sdata->local = local;
if (WARN_ON(ret)) {
/* ok .. stupid driver, it asked for this! */
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_check_queues(sdata);
if (ret) {
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef,
if (ret) {
drv_remove_interface(local, sdata);
kfree(sdata);
- goto out_unlock;
+ return ret;
}
+ mutex_lock(&local->iflist_mtx);
rcu_assign_pointer(local->monitor_sdata, sdata);
- out_unlock:
mutex_unlock(&local->iflist_mtx);
- return ret;
+
+ return 0;
}
static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return;
+ ASSERT_RTNL();
+
mutex_lock(&local->iflist_mtx);
sdata = rcu_dereference_protected(local->monitor_sdata,
lockdep_is_held(&local->iflist_mtx));
- if (!sdata)
- goto out_unlock;
+ if (!sdata) {
+ mutex_unlock(&local->iflist_mtx);
+ return;
+ }
rcu_assign_pointer(local->monitor_sdata, NULL);
+ mutex_unlock(&local->iflist_mtx);
+
synchronize_net();
ieee80211_vif_release_channel(sdata);
drv_remove_interface(local, sdata);
kfree(sdata);
- out_unlock:
- mutex_unlock(&local->iflist_mtx);
}
/*
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list)
- if (ieee80211_vif_is_mesh(&sdata->vif))
+ if (ieee80211_vif_is_mesh(&sdata->vif) &&
+ ieee80211_sdata_running(sdata))
ieee80211_queue_work(&local->hw, &sdata->work);
rcu_read_unlock();
}
/* Restart STA timers */
rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list)
- ieee80211_restart_sta_timer(sdata);
+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (ieee80211_sdata_running(sdata))
+ ieee80211_restart_sta_timer(sdata);
+ }
rcu_read_unlock();
}
memset(nskb->cb, 0, sizeof(nskb->cb));
- ieee80211_tx_skb(rx->sdata, nskb);
+ if (rx->sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(nskb);
+
+ info->flags = IEEE80211_TX_CTL_TX_OFFCHAN |
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK |
+ IEEE80211_TX_CTL_NO_CCK_RATE;
+ if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
+ info->hw_queue =
+ local->hw.offchannel_tx_hw_queue;
+ }
+
+ __ieee80211_tx_skb_tid_band(rx->sdata, nskb, 7,
+ status->band);
}
dev_kfree_skb(rx->skb);
return RX_QUEUED;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
int ret, i;
+ bool have_key = false;
might_sleep();
list_del_rcu(&sta->list);
mutex_lock(&local->key_mtx);
- for (i = 0; i < NUM_DEFAULT_KEYS; i++)
+ for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
__ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i]));
- if (sta->ptk)
+ have_key = true;
+ }
+ if (sta->ptk) {
__ieee80211_key_free(key_mtx_dereference(local, sta->ptk));
+ have_key = true;
+ }
mutex_unlock(&local->key_mtx);
+ if (!have_key)
+ synchronize_net();
+
sta->dead = true;
local->num_sta--;
flow->deficit = q->quantum;
flow->dropped = 0;
}
- if (++sch->q.qlen < sch->limit)
+ if (++sch->q.qlen <= sch->limit)
return NET_XMIT_SUCCESS;
q->drop_overlimit++;
u64 mult;
int shift;
- r->rate_bps = rate << 3;
+ r->rate_bps = (u64)rate << 3;
r->shift = 0;
r->mult = 1;
/*
rdev_rfkill_poll(rdev);
}
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ lockdep_assert_held(&rdev->devlist_mtx);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
+ return;
+
+ if (!wdev->p2p_started)
+ return;
+
+ rdev_stop_p2p_device(rdev, wdev);
+ wdev->p2p_started = false;
+
+ rdev->opencount--;
+
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ bool busy = work_busy(&rdev->scan_done_wk);
+
+ /*
+ * If the work isn't pending or running (in which case it would
+ * be waiting for the lock we hold) the driver didn't properly
+ * cancel the scan when the interface was removed. In this case
+ * warn and leak the scan request object to not crash later.
+ */
+ WARN_ON(!busy);
+
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, !busy);
+ }
+}
+
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *rdev = data;
return 0;
rtnl_lock();
- mutex_lock(&rdev->devlist_mtx);
+
+ /* read-only iteration need not hold the devlist_mtx */
list_for_each_entry(wdev, &rdev->wdev_list, list) {
if (wdev->netdev) {
/* otherwise, check iftype */
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ /* but this requires it */
+ mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
+ mutex_unlock(&rdev->devlist_mtx);
break;
default:
break;
}
}
- mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
return 0;
wdev = container_of(work, struct wireless_dev, cleanup_work);
rdev = wiphy_to_dev(wdev->wiphy);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
rdev->scan_req->aborted = true;
___cfg80211_scan_done(rdev, true);
}
- cfg80211_unlock_rdev(rdev);
-
- mutex_lock(&rdev->sched_scan_mtx);
-
if (WARN_ON(rdev->sched_scan_req &&
rdev->sched_scan_req->dev == wdev->netdev)) {
__cfg80211_stop_sched_scan(rdev, false);
return;
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
list_del_rcu(&wdev->list);
rdev->devlist_generation++;
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ cfg80211_stop_p2p_device(rdev, wdev);
break;
default:
WARN_ON_ONCE(1);
break;
}
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
}
EXPORT_SYMBOL(cfg80211_unregister_wdev);
cfg80211_update_iface_num(rdev, wdev->iftype, 1);
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
switch (wdev->iftype) {
#ifdef CONFIG_CFG80211_WEXT
break;
}
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
enum nl80211_iftype iftype, int num);
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
+
#define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10
#ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
if (!rdev->ops->scan)
return -EOPNOTSUPP;
- if (rdev->scan_req)
- return -EBUSY;
+ mutex_lock(&rdev->sched_scan_mtx);
+ if (rdev->scan_req) {
+ err = -EBUSY;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
- if (!n_channels)
- return -EINVAL;
+ if (!n_channels) {
+ err = -EINVAL;
+ goto unlock;
+ }
} else {
enum ieee80211_band band;
n_channels = 0;
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp)
n_ssids++;
- if (n_ssids > wiphy->max_scan_ssids)
- return -EINVAL;
+ if (n_ssids > wiphy->max_scan_ssids) {
+ err = -EINVAL;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_IE])
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
else
ie_len = 0;
- if (ie_len > wiphy->max_scan_ie_len)
- return -EINVAL;
+ if (ie_len > wiphy->max_scan_ie_len) {
+ err = -EINVAL;
+ goto unlock;
+ }
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
- if (!request)
- return -ENOMEM;
+ if (!request) {
+ err = -ENOMEM;
+ goto unlock;
+ }
if (n_ssids)
request->ssids = (void *)&request->channels[n_channels];
kfree(request);
}
+ unlock:
+ mutex_unlock(&rdev->sched_scan_mtx);
return err;
}
if (!rdev->ops->stop_p2p_device)
return -EOPNOTSUPP;
- if (!wdev->p2p_started)
- return 0;
-
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
-
- mutex_lock(&rdev->devlist_mtx);
- rdev->opencount--;
- mutex_unlock(&rdev->devlist_mtx);
-
- if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
- rdev->scan_req->aborted = true;
- ___cfg80211_scan_done(rdev, true);
- }
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
return 0;
}
struct nlattr *nest;
int i;
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (WARN_ON(!req))
return 0;
union iwreq_data wrqu;
#endif
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
request = rdev->scan_req;
rdev = container_of(wk, struct cfg80211_registered_device,
scan_done_wk);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
___cfg80211_scan_done(rdev, false);
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
}
void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR);
if (found) {
- found->pub.beacon_interval = tmp->pub.beacon_interval;
- found->pub.signal = tmp->pub.signal;
- found->pub.capability = tmp->pub.capability;
- found->ts = tmp->ts;
-
/* Update IEs */
if (rcu_access_pointer(tmp->pub.proberesp_ies)) {
const struct cfg80211_bss_ies *old;
if (found->pub.hidden_beacon_bss &&
!list_empty(&found->hidden_list)) {
+ const struct cfg80211_bss_ies *f;
+
/*
* The found BSS struct is one of the probe
* response members of a group, but we're
* SSID to showing it, which is confusing so
* drop this information.
*/
+
+ f = rcu_access_pointer(tmp->pub.beacon_ies);
+ kfree_rcu((struct cfg80211_bss_ies *)f,
+ rcu_head);
goto drop;
}
kfree_rcu((struct cfg80211_bss_ies *)old,
rcu_head);
}
+
+ found->pub.beacon_interval = tmp->pub.beacon_interval;
+ found->pub.signal = tmp->pub.signal;
+ found->pub.capability = tmp->pub.capability;
+ found->ts = tmp->ts;
} else {
struct cfg80211_internal_bss *new;
struct cfg80211_internal_bss *hidden;
if (IS_ERR(rdev))
return PTR_ERR(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (rdev->scan_req) {
err = -EBUSY;
goto out;
dev_hold(dev);
}
out:
+ mutex_unlock(&rdev->sched_scan_mtx);
kfree(creq);
cfg80211_unlock_rdev(rdev);
return err;
ASSERT_RTNL();
ASSERT_RDEV_LOCK(rdev);
ASSERT_WDEV_LOCK(wdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (rdev->scan_req)
return -EBUSY;
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- mutex_lock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
wdev_lock(wdev);
__cfg80211_sme_scan_done(dev);
wdev_unlock(wdev);
- mutex_unlock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
}
void cfg80211_sme_rx_auth(struct net_device *dev,
int err;
mutex_lock(&rdev->devlist_mtx);
+ /* might request scan - scan_mtx -> wdev_mtx dependency */
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(dev->ieee80211_ptr);
err = __cfg80211_connect(rdev, dev, connect, connkeys, NULL);
wdev_unlock(dev->ieee80211_ptr);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
return err;
#define WIPHY_PR_ARG __entry->wiphy_name
#define WDEV_ENTRY __field(u32, id)
-#define WDEV_ASSIGN (__entry->id) = (wdev ? wdev->identifier : 0)
+#define WDEV_ASSIGN (__entry->id) = (!IS_ERR_OR_NULL(wdev) \
+ ? wdev->identifier : 0)
#define WDEV_PR_FMT "wdev(%u)"
#define WDEV_PR_ARG (__entry->id)
),
TP_fast_assign(
WIPHY_ASSIGN;
- WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
__entry->acl_policy = params->acl_policy;
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d",
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
err = 0;
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
x->xflags &= ~XFRM_TIME_DEFER;
}
+static void xfrm_replay_notify_esn(struct xfrm_state *x, int event)
+{
+ u32 seq_diff, oseq_diff;
+ struct km_event c;
+ struct xfrm_replay_state_esn *replay_esn = x->replay_esn;
+ struct xfrm_replay_state_esn *preplay_esn = x->preplay_esn;
+
+ /* we send notify messages in case
+ * 1. we updated on of the sequence numbers, and the seqno difference
+ * is at least x->replay_maxdiff, in this case we also update the
+ * timeout of our timer function
+ * 2. if x->replay_maxage has elapsed since last update,
+ * and there were changes
+ *
+ * The state structure must be locked!
+ */
+
+ switch (event) {
+ case XFRM_REPLAY_UPDATE:
+ if (!x->replay_maxdiff)
+ break;
+
+ if (replay_esn->seq_hi == preplay_esn->seq_hi)
+ seq_diff = replay_esn->seq - preplay_esn->seq;
+ else
+ seq_diff = ~preplay_esn->seq + replay_esn->seq + 1;
+
+ if (replay_esn->oseq_hi == preplay_esn->oseq_hi)
+ oseq_diff = replay_esn->oseq - preplay_esn->oseq;
+ else
+ oseq_diff = ~preplay_esn->oseq + replay_esn->oseq + 1;
+
+ if (seq_diff < x->replay_maxdiff &&
+ oseq_diff < x->replay_maxdiff) {
+
+ if (x->xflags & XFRM_TIME_DEFER)
+ event = XFRM_REPLAY_TIMEOUT;
+ else
+ return;
+ }
+
+ break;
+
+ case XFRM_REPLAY_TIMEOUT:
+ if (memcmp(x->replay_esn, x->preplay_esn,
+ xfrm_replay_state_esn_len(replay_esn)) == 0) {
+ x->xflags |= XFRM_TIME_DEFER;
+ return;
+ }
+
+ break;
+ }
+
+ memcpy(x->preplay_esn, x->replay_esn,
+ xfrm_replay_state_esn_len(replay_esn));
+ c.event = XFRM_MSG_NEWAE;
+ c.data.aevent = event;
+ km_state_notify(x, &c);
+
+ if (x->replay_maxage &&
+ !mod_timer(&x->rtimer, jiffies + x->replay_maxage))
+ x->xflags &= ~XFRM_TIME_DEFER;
+}
+
static int xfrm_replay_overflow_esn(struct xfrm_state *x, struct sk_buff *skb)
{
int err = 0;
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
.recheck = xfrm_replay_recheck_esn,
- .notify = xfrm_replay_notify_bmp,
+ .notify = xfrm_replay_notify_esn,
.overflow = xfrm_replay_overflow_esn,
};
projects / cascardo / linux.git / commitdiff