ncr5380: Add support for HP C2502

HP C2502 cards (based on 53C400A chips) use different magic numbers for
software-based I/O address configuration than other cards.
The configuration is also extended to allow setting the IRQ.

Move the configuration to a new function magic_configure() and move
magic the magic numbers into an array. Add new magic numbers for these
HP cards and hp_c2502 module parameter to use them, e.g.:
modprobe g_NCR5380 ncr_irq=7 ncr_addr=0x280 hp_c2502=1

Tested with HP C2502 and DTCT-436P.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 5030cc0..90091e6 100644 (file)
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -80,6 +80,7 @@ static int ncr_5380;
 static int ncr_53c400;
 static int ncr_53c400a;
 static int dtc_3181e;
+static int hp_c2502;
 
 static struct override {
        NCR5380_map_type NCR5380_map_name;
@@ -225,6 +226,30 @@ static int __init do_DTC3181E_setup(char *str)
 
 #endif
 
+#ifndef SCSI_G_NCR5380_MEM
+/*
+ * Configure I/O address of 53C400A or DTC436 by writing magic numbers
+ * to ports 0x779 and 0x379.
+ */
+static void magic_configure(int idx, u8 irq, u8 magic[])
+{
+       u8 cfg = 0;
+
+       outb(magic[0], 0x779);
+       outb(magic[1], 0x379);
+       outb(magic[2], 0x379);
+       outb(magic[3], 0x379);
+       outb(magic[4], 0x379);
+
+       /* allowed IRQs for HP C2502 */
+       if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
+               irq = 0;
+       if (idx >= 0 && idx <= 7)
+               cfg = 0x80 | idx | (irq << 4);
+       outb(cfg, 0x379);
+}
+#endif
+
 /**
  *     generic_NCR5380_detect  -       look for NCR5380 controllers
  *     @tpnt: the scsi template
@@ -241,8 +266,10 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
        static int current_override;
        int count;
        unsigned int *ports;
+       u8 *magic = NULL;
 #ifndef SCSI_G_NCR5380_MEM
        int i;
+       int port_idx = -1;
        unsigned long region_size = 16;
 #endif
        static unsigned int __initdata ncr_53c400a_ports[] = {
@@ -251,6 +278,12 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
        static unsigned int __initdata dtc_3181e_ports[] = {
                0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
        };
+       static u8 ncr_53c400a_magic[] __initdata = {    /* 53C400A & DTC436 */
+               0x59, 0xb9, 0xc5, 0xae, 0xa6
+       };
+       static u8 hp_c2502_magic[] __initdata = {       /* HP C2502 */
+               0x0f, 0x22, 0xf0, 0x20, 0x80
+       };
        int flags;
        struct Scsi_Host *instance;
        struct NCR5380_hostdata *hostdata;
@@ -273,6 +306,8 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                overrides[0].board = BOARD_NCR53C400A;
        else if (dtc_3181e)
                overrides[0].board = BOARD_DTC3181E;
+       else if (hp_c2502)
+               overrides[0].board = BOARD_HP_C2502;
 #ifndef SCSI_G_NCR5380_MEM
        if (!current_override && isapnp_present()) {
                struct pnp_dev *dev = NULL;
@@ -325,24 +360,26 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                case BOARD_NCR53C400A:
                        flags = FLAG_NO_DMA_FIXUP;
                        ports = ncr_53c400a_ports;
+                       magic = ncr_53c400a_magic;
+                       break;
+               case BOARD_HP_C2502:
+                       flags = FLAG_NO_DMA_FIXUP;
+                       ports = ncr_53c400a_ports;
+                       magic = hp_c2502_magic;
                        break;
                case BOARD_DTC3181E:
                        flags = FLAG_NO_DMA_FIXUP;
                        ports = dtc_3181e_ports;
+                       magic = ncr_53c400a_magic;
                        break;
                }
 
 #ifndef SCSI_G_NCR5380_MEM
-               if (ports) {
+               if (ports && magic) {
                        /* wakeup sequence for the NCR53C400A and DTC3181E */
 
                        /* Disable the adapter and look for a free io port */
-                       outb(0x59, 0x779);
-                       outb(0xb9, 0x379);
-                       outb(0xc5, 0x379);
-                       outb(0xae, 0x379);
-                       outb(0xa6, 0x379);
-                       outb(0x00, 0x379);
+                       magic_configure(-1, 0, magic);
 
                        if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
                                for (i = 0; ports[i]; i++) {
@@ -361,17 +398,12 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                                }
                        if (ports[i]) {
                                /* At this point we have our region reserved */
-                               outb(0x59, 0x779);
-                               outb(0xb9, 0x379);
-                               outb(0xc5, 0x379);
-                               outb(0xae, 0x379);
-                               outb(0xa6, 0x379);
-                               outb(0x80 | i, 0x379);  /* set io port to be used */
+                               magic_configure(i, 0, magic); /* no IRQ yet */
                                outb(0xc0, ports[i] + 9);
                                if (inb(ports[i] + 9) != 0x80)
                                        continue;
-                               else
-                                       overrides[current_override].NCR5380_map_name = ports[i];
+                               overrides[current_override].NCR5380_map_name = ports[i];
+                               port_idx = i;
                        } else
                                continue;
                }
@@ -417,6 +449,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                        hostdata->io_width = 2; /* 16-bit PDMA */
                        /* fall through */
                case BOARD_NCR53C400A:
+               case BOARD_HP_C2502:
                        hostdata->c400_ctl_status = 9;
                        hostdata->c400_blk_cnt = 10;
                        hostdata->c400_host_buf = 8;
@@ -433,6 +466,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                        break;
                case BOARD_DTC3181E:
                case BOARD_NCR53C400A:
+               case BOARD_HP_C2502:
                        pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
                        goto out_unregister;
                }
@@ -445,6 +479,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                case BOARD_NCR53C400:
                case BOARD_DTC3181E:
                case BOARD_NCR53C400A:
+               case BOARD_HP_C2502:
                        NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
                }
 
@@ -459,12 +494,18 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                if (instance->irq == 255)
                        instance->irq = NO_IRQ;
 
-               if (instance->irq != NO_IRQ)
+               if (instance->irq != NO_IRQ) {
+#ifndef SCSI_G_NCR5380_MEM
+                       /* set IRQ for HP C2502 */
+                       if (overrides[current_override].board == BOARD_HP_C2502)
+                               magic_configure(port_idx, instance->irq, magic);
+#endif
                        if (request_irq(instance->irq, generic_NCR5380_intr,
                                        0, "NCR5380", instance)) {
                                printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
                                instance->irq = NO_IRQ;
                        }
+               }
 
                if (instance->irq == NO_IRQ) {
                        printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
@@ -751,6 +792,7 @@ module_param(ncr_5380, int, 0);
 module_param(ncr_53c400, int, 0);
 module_param(ncr_53c400a, int, 0);
 module_param(dtc_3181e, int, 0);
+module_param(hp_c2502, int, 0);
 MODULE_LICENSE("GPL");
 
 #if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE)

diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 5ab64d9..6f3d2ac 100644 (file)
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -88,6 +88,7 @@
 #define BOARD_NCR53C400        1
 #define BOARD_NCR53C400A 2
 #define BOARD_DTC3181E 3
+#define BOARD_HP_C2502 4
 
 #endif /* GENERIC_NCR5380_H */