Input: add Broadcom iProc touchscreen driver
authorJonathan Richardson <jonathar@broadcom.com>
Sun, 22 Mar 2015 04:04:59 +0000 (21:04 -0700)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Mon, 23 Mar 2015 18:04:48 +0000 (11:04 -0700)
Add initial version of the Broadcom touchscreen driver.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt [new file with mode: 0644]
drivers/input/touchscreen/Kconfig
drivers/input/touchscreen/Makefile
drivers/input/touchscreen/bcm_iproc_tsc.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
new file mode 100644 (file)
index 0000000..34e3382
--- /dev/null
@@ -0,0 +1,76 @@
+* Broadcom's IPROC Touchscreen Controller
+
+Required properties:
+- compatible: must be "brcm,iproc-touchscreen"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks:  The clock provided by the SOC to driver the tsc
+- clock-name:  name for the clock
+- interrupts: The touchscreen controller's interrupt
+
+Optional properties:
+- scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
+- debounce_timeout: Each step is 512 us.  Valid 0-255
+- settling_timeout: The settling duration (in ms) is the amount of time
+                    the tsc waits to allow the voltage to settle after
+                    turning on the drivers in detection mode.
+                    Valid values: 0-11
+                    0 =  0.008 ms
+                    1 =  0.01 ms
+                    2 =  0.02 ms
+                    3 =  0.04 ms
+                    4 =  0.08 ms
+                    5 =  0.16 ms
+                    6 =  0.32 ms
+                    7 =  0.64 ms
+                    8 =  1.28 ms
+                    9 =  2.56 ms
+                   10 =  5.12 ms
+                   11 = 10.24 ms
+- touch_timeout: The continuous number of scan periods in which touch is
+                not detected before the controller returns to idle state.
+                Valid values 0-255.
+- average_data: Number of data samples which are averaged before a final
+                data point is placed into the FIFO
+                Valid values 0-7
+                0 =   1 sample
+                1 =   2 samples
+                2 =   4 samples
+                3 =   8 samples
+                4 =  16 samples
+                5 =  32 samples
+                6 =  64 samples
+                7 = 128 samples
+- fifo_threshold: Interrupt is generated whenever the number of fifo
+                entries exceeds this value
+                Valid values 0-31
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+- touchscreen-fuzz-x: horizontal noise value of the absolute input
+                      device (in pixels)
+- touchscreen-fuzz-y: vertical noise value of the absolute input
+                      device (in pixels)
+- touchscreen-inverted-x: X axis is inverted (boolean)
+- touchscreen-inverted-y: Y axis is inverted (boolean)
+
+Example:
+
+       touchscreen: tsc@0x180A6000 {
+               compatible = "brcm,iproc-touchscreen";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0x180A6000 0x40>;
+               clocks = <&adc_clk>;
+               clock-names = "tsc_clk";
+               interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+               scanning_period = <5>;
+               debounce_timeout = <40>;
+               settling_timeout = <7>;
+               touch_timeout = <10>;
+               average_data = <5>;
+               fifo_threshold = <1>;
+               /* Touchscreen is rotated 180 degrees. */
+               touchscreen-inverted-x;
+               touchscreen-inverted-y;
+       };
index 1130c40..a1cfe16 100644 (file)
@@ -324,6 +324,18 @@ config TOUCHSCREEN_ILI210X
          To compile this driver as a module, choose M here: the
          module will be called ili210x.
 
+config TOUCHSCREEN_IPROC
+       tristate "IPROC touch panel driver support"
+       depends on ARCH_BCM_IPROC || COMPILE_TEST
+       help
+         Say Y here if you want to add support for the IPROC touch
+         controller to your system.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called bcm_iproc_tsc.
+
 config TOUCHSCREEN_S3C2410
        tristate "Samsung S3C2410/generic touchscreen input driver"
        depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
index a06a752..09c3353 100644 (file)
@@ -39,6 +39,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX)      += goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)      += ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)       += inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)    += intel-mid-touch.o
+obj-$(CONFIG_TOUCHSCREEN_IPROC)                += bcm_iproc_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_LPC32XX)      += lpc32xx_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MAX11801)     += max11801_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)      += mc13783_ts.o
diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
new file mode 100644 (file)
index 0000000..ae460a5
--- /dev/null
@@ -0,0 +1,522 @@
+/*
+* Copyright (C) 2015 Broadcom Corporation
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation version 2.
+*
+* This program is distributed "as is" WITHOUT ANY WARRANTY of any
+* kind, whether express or implied; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/serio.h>
+
+#define IPROC_TS_NAME "iproc-ts"
+
+#define PEN_DOWN_STATUS     1
+#define PEN_UP_STATUS       0
+
+#define X_MIN               0
+#define Y_MIN               0
+#define X_MAX               0xFFF
+#define Y_MAX               0xFFF
+
+/* Value given by controller for invalid coordinate. */
+#define INVALID_COORD       0xFFFFFFFF
+
+/* Register offsets */
+#define REGCTL1             0x00
+#define REGCTL2             0x04
+#define INTERRUPT_THRES     0x08
+#define INTERRUPT_MASK      0x0c
+
+#define INTERRUPT_STATUS    0x10
+#define CONTROLLER_STATUS   0x14
+#define FIFO_DATA           0x18
+#define FIFO_DATA_X_Y_MASK  0xFFFF
+#define ANALOG_CONTROL      0x1c
+
+#define AUX_DATA            0x20
+#define DEBOUNCE_CNTR_STAT  0x24
+#define SCAN_CNTR_STAT      0x28
+#define REM_CNTR_STAT       0x2c
+
+#define SETTLING_TIMER_STAT 0x30
+#define SPARE_REG           0x34
+#define SOFT_BYPASS_CONTROL 0x38
+#define SOFT_BYPASS_DATA    0x3c
+
+
+/* Bit values for INTERRUPT_MASK and INTERRUPT_STATUS regs */
+#define TS_PEN_INTR_MASK        BIT(0)
+#define TS_FIFO_INTR_MASK       BIT(2)
+
+/* Bit values for CONTROLLER_STATUS reg1 */
+#define TS_PEN_DOWN             BIT(0)
+
+/* Shift values for control reg1 */
+#define SCANNING_PERIOD_SHIFT   24
+#define DEBOUNCE_TIMEOUT_SHIFT  16
+#define SETTLING_TIMEOUT_SHIFT  8
+#define TOUCH_TIMEOUT_SHIFT     0
+
+/* Shift values for coordinates from fifo */
+#define X_COORD_SHIFT  0
+#define Y_COORD_SHIFT  16
+
+/* Bit values for REGCTL2 */
+#define TS_CONTROLLER_EN_BIT    BIT(16)
+#define TS_CONTROLLER_AVGDATA_SHIFT 8
+#define TS_CONTROLLER_AVGDATA_MASK (0x7 << TS_CONTROLLER_AVGDATA_SHIFT)
+#define TS_CONTROLLER_PWR_LDO   BIT(5)
+#define TS_CONTROLLER_PWR_ADC   BIT(4)
+#define TS_CONTROLLER_PWR_BGP   BIT(3)
+#define TS_CONTROLLER_PWR_TS    BIT(2)
+#define TS_WIRE_MODE_BIT        BIT(1)
+
+#define dbg_reg(dev, priv, reg) \
+       dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
+
+struct tsc_param {
+       /* Each step is 1024 us.  Valid 1-256 */
+       u32 scanning_period;
+
+       /*  Each step is 512 us.  Valid 0-255 */
+       u32 debounce_timeout;
+
+       /*
+        * The settling duration (in ms) is the amount of time the tsc
+        * waits to allow the voltage to settle after turning on the
+        * drivers in detection mode. Valid values: 0-11
+        *   0 =  0.008 ms
+        *   1 =  0.01 ms
+        *   2 =  0.02 ms
+        *   3 =  0.04 ms
+        *   4 =  0.08 ms
+        *   5 =  0.16 ms
+        *   6 =  0.32 ms
+        *   7 =  0.64 ms
+        *   8 =  1.28 ms
+        *   9 =  2.56 ms
+        *   10 = 5.12 ms
+        *   11 = 10.24 ms
+        */
+       u32 settling_timeout;
+
+       /* touch timeout in sample counts */
+       u32 touch_timeout;
+
+       /*
+        * Number of data samples which are averaged before a final data point
+        * is placed into the FIFO
+        */
+       u32 average_data;
+
+       /* FIFO threshold */
+       u32 fifo_threshold;
+
+       /* Optional standard touchscreen properties. */
+       u32 max_x;
+       u32 max_y;
+       u32 fuzz_x;
+       u32 fuzz_y;
+       bool invert_x;
+       bool invert_y;
+};
+
+struct iproc_ts_priv {
+       struct platform_device *pdev;
+       struct input_dev *idev;
+
+       void __iomem *regs;
+       struct clk *tsc_clk;
+
+       int  pen_status;
+       struct tsc_param cfg_params;
+};
+
+/*
+ * Set default values the same as hardware reset values
+ * except for fifo_threshold with is set to 1.
+ */
+static const struct tsc_param iproc_default_config = {
+       .scanning_period  = 0x5,  /* 1 to 256 */
+       .debounce_timeout = 0x28, /* 0 to 255 */
+       .settling_timeout = 0x7,  /* 0 to 11 */
+       .touch_timeout    = 0xa,  /* 0 to 255 */
+       .average_data     = 5,    /* entry 5 = 32 pts */
+       .fifo_threshold   = 1,    /* 0 to 31 */
+       .max_x            = X_MAX,
+       .max_y            = Y_MAX,
+};
+
+static void ts_reg_dump(struct iproc_ts_priv *priv)
+{
+       struct device *dev = &priv->pdev->dev;
+
+       dbg_reg(dev, priv, REGCTL1);
+       dbg_reg(dev, priv, REGCTL2);
+       dbg_reg(dev, priv, INTERRUPT_THRES);
+       dbg_reg(dev, priv, INTERRUPT_MASK);
+       dbg_reg(dev, priv, INTERRUPT_STATUS);
+       dbg_reg(dev, priv, CONTROLLER_STATUS);
+       dbg_reg(dev, priv, FIFO_DATA);
+       dbg_reg(dev, priv, ANALOG_CONTROL);
+       dbg_reg(dev, priv, AUX_DATA);
+       dbg_reg(dev, priv, DEBOUNCE_CNTR_STAT);
+       dbg_reg(dev, priv, SCAN_CNTR_STAT);
+       dbg_reg(dev, priv, REM_CNTR_STAT);
+       dbg_reg(dev, priv, SETTLING_TIMER_STAT);
+       dbg_reg(dev, priv, SPARE_REG);
+       dbg_reg(dev, priv, SOFT_BYPASS_CONTROL);
+       dbg_reg(dev, priv, SOFT_BYPASS_DATA);
+}
+
+static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
+{
+       struct platform_device *pdev = data;
+       struct iproc_ts_priv *priv = platform_get_drvdata(pdev);
+       u32 intr_status;
+       u32 raw_coordinate;
+       u16 x;
+       u16 y;
+       int i;
+       bool needs_sync = false;
+
+       intr_status = readl(priv->regs + INTERRUPT_STATUS);
+       intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+       if (intr_status == 0)
+               return IRQ_NONE;
+
+       /* Clear all interrupt status bits, write-1-clear */
+       writel(intr_status, priv->regs + INTERRUPT_STATUS);
+
+       /* Pen up/down */
+       if (intr_status & TS_PEN_INTR_MASK) {
+               if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN)
+                       priv->pen_status = PEN_DOWN_STATUS;
+               else
+                       priv->pen_status = PEN_UP_STATUS;
+
+               input_report_key(priv->idev, BTN_TOUCH, priv->pen_status);
+               needs_sync = true;
+
+               dev_dbg(&priv->pdev->dev,
+                       "pen up-down (%d)\n", priv->pen_status);
+       }
+
+       /* coordinates in FIFO exceed the theshold */
+       if (intr_status & TS_FIFO_INTR_MASK) {
+               for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
+                       raw_coordinate = readl(priv->regs + FIFO_DATA);
+                       if (raw_coordinate == INVALID_COORD)
+                               continue;
+
+                       /*
+                        * The x and y coordinate are 16 bits each
+                        * with the x in the lower 16 bits and y in the
+                        * upper 16 bits.
+                        */
+                       x = (raw_coordinate >> X_COORD_SHIFT) &
+                               FIFO_DATA_X_Y_MASK;
+                       y = (raw_coordinate >> Y_COORD_SHIFT) &
+                               FIFO_DATA_X_Y_MASK;
+
+                       /* We only want to retain the 12 msb of the 16 */
+                       x = (x >> 4) & 0x0FFF;
+                       y = (y >> 4) & 0x0FFF;
+
+                       /* adjust x y according to lcd tsc mount angle */
+                       if (priv->cfg_params.invert_x)
+                               x = priv->cfg_params.max_x - x;
+
+                       if (priv->cfg_params.invert_y)
+                               y = priv->cfg_params.max_y - y;
+
+                       input_report_abs(priv->idev, ABS_X, x);
+                       input_report_abs(priv->idev, ABS_Y, y);
+                       needs_sync = true;
+
+                       dev_dbg(&priv->pdev->dev, "xy (0x%x 0x%x)\n", x, y);
+               }
+       }
+
+       if (needs_sync)
+               input_sync(priv->idev);
+
+       return IRQ_HANDLED;
+}
+
+static int iproc_ts_start(struct input_dev *idev)
+{
+       struct iproc_ts_priv *priv = input_get_drvdata(idev);
+       u32 val;
+       int error;
+
+       /* Enable clock */
+       error = clk_prepare_enable(priv->tsc_clk);
+       if (error) {
+               dev_err(&priv->pdev->dev, "%s clk_prepare_enable failed %d\n",
+                       __func__, error);
+               return error;
+       }
+
+       /*
+        * Interrupt is generated when:
+        *  FIFO reaches the int_th value, and pen event(up/down)
+        */
+       val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+       writel(val, priv->regs + INTERRUPT_MASK);
+
+       writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES);
+
+       /* Initialize control reg1 */
+       val = 0;
+       val |= priv->cfg_params.scanning_period << SCANNING_PERIOD_SHIFT;
+       val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT;
+       val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT;
+       val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT;
+       writel(val, priv->regs + REGCTL1);
+
+       /* Try to clear all interrupt status */
+       val = readl(priv->regs + INTERRUPT_STATUS);
+       val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
+       writel(val, priv->regs + INTERRUPT_STATUS);
+
+       /* Initialize control reg2 */
+       val = readl(priv->regs + REGCTL2);
+       val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
+
+       val &= ~TS_CONTROLLER_AVGDATA_MASK;
+       val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT;
+
+       val &= ~(TS_CONTROLLER_PWR_LDO |        /* PWR up LDO */
+                  TS_CONTROLLER_PWR_ADC |      /* PWR up ADC */
+                  TS_CONTROLLER_PWR_BGP |      /* PWR up BGP */
+                  TS_CONTROLLER_PWR_TS);       /* PWR up TS */
+
+       writel(val, priv->regs + REGCTL2);
+
+       ts_reg_dump(priv);
+
+       return 0;
+}
+
+static void iproc_ts_stop(struct input_dev *dev)
+{
+       u32 val;
+       struct iproc_ts_priv *priv = input_get_drvdata(dev);
+
+       writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */
+
+       /* Only power down touch screen controller */
+       val = readl(priv->regs + REGCTL2);
+       val |= TS_CONTROLLER_PWR_TS;
+       writel(val, priv->regs + REGCTL2);
+
+       clk_disable(priv->tsc_clk);
+}
+
+static int iproc_get_tsc_config(struct device *dev, struct iproc_ts_priv *priv)
+{
+       struct device_node *np = dev->of_node;
+       u32 val;
+
+       priv->cfg_params = iproc_default_config;
+
+       if (!np)
+               return 0;
+
+       if (of_property_read_u32(np, "scanning_period", &val) >= 0) {
+               if (val < 1 || val > 256) {
+                       dev_err(dev, "scanning_period (%u) must be [1-256]\n",
+                               val);
+                       return -EINVAL;
+               }
+               priv->cfg_params.scanning_period = val;
+       }
+
+       if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
+               if (val > 255) {
+                       dev_err(dev, "debounce_timeout (%u) must be [0-255]\n",
+                               val);
+                       return -EINVAL;
+               }
+               priv->cfg_params.debounce_timeout = val;
+       }
+
+       if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
+               if (val > 11) {
+                       dev_err(dev, "settling_timeout (%u) must be [0-11]\n",
+                               val);
+                       return -EINVAL;
+               }
+               priv->cfg_params.settling_timeout = val;
+       }
+
+       if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
+               if (val > 255) {
+                       dev_err(dev, "touch_timeout (%u) must be [0-255]\n",
+                               val);
+                       return -EINVAL;
+               }
+               priv->cfg_params.touch_timeout = val;
+       }
+
+       if (of_property_read_u32(np, "average_data", &val) >= 0) {
+               if (val > 8) {
+                       dev_err(dev, "average_data (%u) must be [0-8]\n", val);
+                       return -EINVAL;
+               }
+               priv->cfg_params.average_data = val;
+       }
+
+       if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
+               if (val > 31) {
+                       dev_err(dev, "fifo_threshold (%u)) must be [0-31]\n",
+                               val);
+                       return -EINVAL;
+               }
+               priv->cfg_params.fifo_threshold = val;
+       }
+
+       /* Parse optional properties. */
+       of_property_read_u32(np, "touchscreen-size-x", &priv->cfg_params.max_x);
+       of_property_read_u32(np, "touchscreen-size-y", &priv->cfg_params.max_y);
+
+       of_property_read_u32(np, "touchscreen-fuzz-x",
+                            &priv->cfg_params.fuzz_x);
+       of_property_read_u32(np, "touchscreen-fuzz-y",
+                            &priv->cfg_params.fuzz_y);
+
+       priv->cfg_params.invert_x =
+               of_property_read_bool(np, "touchscreen-inverted-x");
+       priv->cfg_params.invert_y =
+               of_property_read_bool(np, "touchscreen-inverted-y");
+
+       return 0;
+}
+
+static int iproc_ts_probe(struct platform_device *pdev)
+{
+       struct iproc_ts_priv *priv;
+       struct input_dev *idev;
+       struct resource *res;
+       int irq;
+       int error;
+
+       priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       /* touchscreen controller memory mapped regs */
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       priv->regs = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(priv->regs)) {
+               error = PTR_ERR(priv->regs);
+               dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error);
+               return error;
+       }
+
+       priv->tsc_clk = devm_clk_get(&pdev->dev, "tsc_clk");
+       if (IS_ERR(priv->tsc_clk)) {
+               error = PTR_ERR(priv->tsc_clk);
+               dev_err(&pdev->dev,
+                       "failed getting clock tsc_clk: %d\n", error);
+               return error;
+       }
+
+       priv->pdev = pdev;
+       error = iproc_get_tsc_config(&pdev->dev, priv);
+       if (error) {
+               dev_err(&pdev->dev, "get_tsc_config failed: %d\n", error);
+               return error;
+       }
+
+       idev = devm_input_allocate_device(&pdev->dev);
+       if (!idev) {
+               dev_err(&pdev->dev, "failed to allocate input device\n");
+               return -ENOMEM;
+       }
+
+       priv->idev = idev;
+       priv->pen_status = PEN_UP_STATUS;
+
+       /* Set input device info  */
+       idev->name = IPROC_TS_NAME;
+       idev->dev.parent = &pdev->dev;
+
+       idev->id.bustype = BUS_HOST;
+       idev->id.vendor = SERIO_UNKNOWN;
+       idev->id.product = 0;
+       idev->id.version = 0;
+
+       idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+       __set_bit(BTN_TOUCH, idev->keybit);
+
+       input_set_abs_params(idev, ABS_X, X_MIN, priv->cfg_params.max_x,
+                            priv->cfg_params.fuzz_x, 0);
+       input_set_abs_params(idev, ABS_Y, Y_MIN, priv->cfg_params.max_y,
+                            priv->cfg_params.fuzz_y, 0);
+
+       idev->open = iproc_ts_start;
+       idev->close = iproc_ts_stop;
+
+       input_set_drvdata(idev, priv);
+       platform_set_drvdata(pdev, priv);
+
+       /* get interrupt */
+       irq = platform_get_irq(pdev, 0);
+       if (irq < 0) {
+               dev_err(&pdev->dev, "platform_get_irq failed: %d\n", irq);
+               return irq;
+       }
+
+       error = devm_request_irq(&pdev->dev, irq,
+                                iproc_touchscreen_interrupt,
+                                IRQF_SHARED, IPROC_TS_NAME, pdev);
+       if (error)
+               return error;
+
+       error = input_register_device(priv->idev);
+       if (error) {
+               dev_err(&pdev->dev,
+                       "failed to register input device: %d\n", error);
+               return error;
+       }
+
+       return 0;
+}
+
+static const struct of_device_id iproc_ts_of_match[] = {
+       {.compatible = "brcm,iproc-touchscreen", },
+       { },
+};
+MODULE_DEVICE_TABLE(of, iproc_ts_of_match);
+
+static struct platform_driver iproc_ts_driver = {
+       .probe = iproc_ts_probe,
+       .driver = {
+               .name   = IPROC_TS_NAME,
+               .of_match_table = of_match_ptr(iproc_ts_of_match),
+       },
+};
+
+module_platform_driver(iproc_ts_driver);
+
+MODULE_DESCRIPTION("IPROC Touchscreen driver");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");