return err;
}
+static int sd_select_driver_type(struct mmc_card *card, u8 *status)
+{
+ int host_drv_type = 0, card_drv_type = 0;
+ int err;
+
+ /*
+ * If the host doesn't support any of the Driver Types A,C or D,
+ * default Driver Type B is used.
+ */
+ if (!(card->host->caps & (MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C
+ | MMC_CAP_DRIVER_TYPE_D)))
+ return 0;
+
+ if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) {
+ host_drv_type = MMC_SET_DRIVER_TYPE_A;
+ if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A)
+ card_drv_type = MMC_SET_DRIVER_TYPE_A;
+ else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B)
+ card_drv_type = MMC_SET_DRIVER_TYPE_B;
+ else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C)
+ card_drv_type = MMC_SET_DRIVER_TYPE_C;
+ } else if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) {
+ host_drv_type = MMC_SET_DRIVER_TYPE_C;
+ if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C)
+ card_drv_type = MMC_SET_DRIVER_TYPE_C;
+ } else if (!(card->host->caps & MMC_CAP_DRIVER_TYPE_D)) {
+ /*
+ * If we are here, that means only the default driver type
+ * B is supported by the host.
+ */
+ host_drv_type = MMC_SET_DRIVER_TYPE_B;
+ if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B)
+ card_drv_type = MMC_SET_DRIVER_TYPE_B;
+ else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C)
+ card_drv_type = MMC_SET_DRIVER_TYPE_C;
+ }
+
+ err = mmc_sd_switch(card, 1, 2, card_drv_type, status);
+ if (err)
+ return err;
+
+ if ((status[15] & 0xF) != card_drv_type) {
+ printk(KERN_WARNING "%s: Problem setting driver strength!\n",
+ mmc_hostname(card->host));
+ return 0;
+ }
+
+ mmc_set_driver_type(card->host, host_drv_type);
+
+ return 0;
+}
+
+/*
+ * UHS-I specific initialization procedure
+ */
+static int mmc_sd_init_uhs_card(struct mmc_card *card)
+{
+ int err;
+ u8 *status;
+
+ if (!card->scr.sda_spec3)
+ return 0;
+
+ if (!(card->csd.cmdclass & CCC_SWITCH))
+ return 0;
+
+ status = kmalloc(64, GFP_KERNEL);
+ if (!status) {
+ printk(KERN_ERR "%s: could not allocate a buffer for "
+ "switch capabilities.\n", mmc_hostname(card->host));
+ return -ENOMEM;
+ }
+
+ /* Set 4-bit bus width */
+ if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+ if (err)
+ goto out;
+
+ mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+ }
+
+ /* Set the driver strength for the card */
+ err = sd_select_driver_type(card, status);
+
+out:
+ kfree(status);
+
+ return err;
+}
+
MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
card->raw_cid[2], card->raw_cid[3]);
MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
/*
* Fetch CID from card.
*/
-int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid)
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
{
int err;
- u32 rocr;
/*
* Since we're changing the OCR value, we seem to
ocr |= SD_OCR_XPC;
try_again:
- err = mmc_send_app_op_cond(host, ocr, &rocr);
+ err = mmc_send_app_op_cond(host, ocr, rocr);
if (err)
return err;
* In case CCS and S18A in the response is set, start Signal Voltage
* Switch procedure. SPI mode doesn't support CMD11.
*/
- if (!mmc_host_is_spi(host) && ((rocr & 0x41000000) == 0x41000000)) {
+ if (!mmc_host_is_spi(host) && rocr &&
+ ((*rocr & 0x41000000) == 0x41000000)) {
err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
if (err) {
ocr &= ~SD_OCR_S18R;
struct mmc_card *card;
int err;
u32 cid[4];
+ u32 rocr = 0;
BUG_ON(!host);
WARN_ON(!host->claimed);
- err = mmc_sd_get_cid(host, ocr, cid);
+ err = mmc_sd_get_cid(host, ocr, cid, &rocr);
if (err)
return err;
if (err)
goto free_card;
- /*
- * Attempt to change to high-speed (if supported)
- */
- err = mmc_sd_switch_hs(card);
- if (err > 0)
- mmc_sd_go_highspeed(card);
- else if (err)
- goto free_card;
-
- /*
- * Set bus speed.
- */
- mmc_set_clock(host, mmc_sd_get_max_clock(card));
-
- /*
- * Switch to wider bus (if supported).
- */
- if ((host->caps & MMC_CAP_4_BIT_DATA) &&
- (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
- err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+ /* Initialization sequence for UHS-I cards */
+ if (rocr & SD_ROCR_S18A) {
+ err = mmc_sd_init_uhs_card(card);
if (err)
goto free_card;
+ } else {
+ /*
+ * Attempt to change to high-speed (if supported)
+ */
+ err = mmc_sd_switch_hs(card);
+ if (err > 0)
+ mmc_sd_go_highspeed(card);
+ else if (err)
+ goto free_card;
+
+ /*
+ * Set bus speed.
+ */
+ mmc_set_clock(host, mmc_sd_get_max_clock(card));
- mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
+ /*
+ * Switch to wider bus (if supported).
+ */
+ if ((host->caps & MMC_CAP_4_BIT_DATA) &&
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+ if (err)
+ goto free_card;
+
+ mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
+ }
}
host->card = card;
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ if (host->version >= SDHCI_SPEC_300) {
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+ /*
+ * We only need to set Driver Strength if the
+ * preset value enable is not set.
+ */
+ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
+ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
+ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
+
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+ }
+ }
+
/*
* Some (ENE) controllers go apeshit on some ios operation,
* signalling timeout and CRC errors even on CMD0. Resetting
if (caps[1] & SDHCI_SUPPORT_DDR50)
mmc->caps |= MMC_CAP_UHS_DDR50;
+ /* Driver Type(s) (A, C, D) supported by the host */
+ if (caps[1] & SDHCI_DRIVER_TYPE_A)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
+ if (caps[1] & SDHCI_DRIVER_TYPE_C)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
+ if (caps[1] & SDHCI_DRIVER_TYPE_D)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
+
ocr_avail = 0;
/*
* According to SD Host Controller spec v3.00, if the Host System
#define SDHCI_DATA_LVL_MASK 0x00F00000
#define SDHCI_DATA_LVL_SHIFT 20
-#define SDHCI_HOST_CONTROL 0x28
+#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
#define SDHCI_CTRL_4BITBUS 0x02
#define SDHCI_CTRL_HISPD 0x04
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL_VDD_180 0x0008
+#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
+#define SDHCI_CTRL_DRV_TYPE_B 0x0000
+#define SDHCI_CTRL_DRV_TYPE_A 0x0010
+#define SDHCI_CTRL_DRV_TYPE_C 0x0020
+#define SDHCI_CTRL_DRV_TYPE_D 0x0030
+#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
#define SDHCI_SUPPORT_DDR50 0x00000004
+#define SDHCI_DRIVER_TYPE_A 0x00000010
+#define SDHCI_DRIVER_TYPE_C 0x00000020
+#define SDHCI_DRIVER_TYPE_D 0x00000040
#define SDHCI_CAPABILITIES_1 0x44
projects / cascardo / linux.git / commitdiff