Still keep sharp_ls_panel driver, because it contains blacklight control driver.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Supports LCD Panel used in TI SDP3430 and EVM boards,
OMAP3517 EVM boards and CM-T35.
-config PANEL_GENERIC
- tristate "Generic Panel"
- help
- Generic panel driver.
- Used for DVI output for Beagle and OMAP3 SDP.
-
config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on OMAP2_DSS
help
LCD Panel used in TI's SDP3430 and EVM boards
-config PANEL_SHARP_LQ043T1DG01
- tristate "Sharp LQ043T1DG01 LCD Panel"
- depends on OMAP2_DSS
- help
- LCD Panel used in TI's OMAP3517 EVM boards
-
config PANEL_NEC_NL8048HL11_01B
tristate "NEC NL8048HL11-01B Panel"
depends on OMAP2_DSS
help
Taal DSI command mode panel from TPO.
-config PANEL_TOPPOLY_TDO35S
- tristate "Toppoly TDO35S LCD Panel support"
- depends on OMAP2_DSS
- help
- LCD Panel used in CM-T35
-
config PANEL_TPO_TD043MTEA1
tristate "TPO TD043MTEA1 LCD Panel"
depends on OMAP2_DSS && SPI
obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
-obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
-obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
-obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
+++ /dev/null
-/*
- * Generic panel support
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-
-#include <plat/display.h>
-
-static struct omap_video_timings generic_panel_timings = {
- /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
- .x_res = 640,
- .y_res = 480,
- .pixel_clock = 23500,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 7,
-};
-
-static int generic_panel_power_on(struct omap_dss_device *dssdev)
-{
- int r;
-
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
- return 0;
-
- r = omapdss_dpi_display_enable(dssdev);
- if (r)
- goto err0;
-
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- goto err1;
- }
-
- return 0;
-err1:
- omapdss_dpi_display_disable(dssdev);
-err0:
- return r;
-}
-
-static void generic_panel_power_off(struct omap_dss_device *dssdev)
-{
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return;
-
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
- omapdss_dpi_display_disable(dssdev);
-}
-
-static int generic_panel_probe(struct omap_dss_device *dssdev)
-{
- dssdev->panel.config = OMAP_DSS_LCD_TFT;
- dssdev->panel.timings = generic_panel_timings;
-
- return 0;
-}
-
-static void generic_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int generic_panel_enable(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- r = generic_panel_power_on(dssdev);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-}
-
-static void generic_panel_disable(struct omap_dss_device *dssdev)
-{
- generic_panel_power_off(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int generic_panel_suspend(struct omap_dss_device *dssdev)
-{
- generic_panel_power_off(dssdev);
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
- return 0;
-}
-
-static int generic_panel_resume(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- r = generic_panel_power_on(dssdev);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-}
-
-static void generic_panel_set_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- dpi_set_timings(dssdev, timings);
-}
-
-static void generic_panel_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
-
-static int generic_panel_check_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- return dpi_check_timings(dssdev, timings);
-}
-
-static struct omap_dss_driver generic_driver = {
- .probe = generic_panel_probe,
- .remove = generic_panel_remove,
-
- .enable = generic_panel_enable,
- .disable = generic_panel_disable,
- .suspend = generic_panel_suspend,
- .resume = generic_panel_resume,
-
- .set_timings = generic_panel_set_timings,
- .get_timings = generic_panel_get_timings,
- .check_timings = generic_panel_check_timings,
-
- .driver = {
- .name = "generic_panel",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init generic_panel_drv_init(void)
-{
- return omap_dss_register_driver(&generic_driver);
-}
-
-static void __exit generic_panel_drv_exit(void)
-{
- omap_dss_unregister_driver(&generic_driver);
-}
-
-module_init(generic_panel_drv_init);
-module_exit(generic_panel_drv_exit);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * LCD panel driver for Sharp LQ043T1DG01
- *
- * Copyright (C) 2009 Texas Instruments Inc
- * Author: Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-
-#include <plat/display.h>
-
-static struct omap_video_timings sharp_lq_timings = {
- .x_res = 480,
- .y_res = 272,
-
- .pixel_clock = 9000,
-
- .hsw = 42,
- .hfp = 3,
- .hbp = 2,
-
- .vsw = 11,
- .vfp = 3,
- .vbp = 2,
-};
-
-static int sharp_lq_panel_power_on(struct omap_dss_device *dssdev)
-{
- int r;
-
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
- return 0;
-
- r = omapdss_dpi_display_enable(dssdev);
- if (r)
- goto err0;
-
- /* wait couple of vsyncs until enabling the LCD */
- msleep(50);
-
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- goto err1;
- }
-
- return 0;
-err1:
- omapdss_dpi_display_disable(dssdev);
-err0:
- return r;
-}
-
-static void sharp_lq_panel_power_off(struct omap_dss_device *dssdev)
-{
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return;
-
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
- /* wait at least 5 vsyncs after disabling the LCD */
- msleep(100);
-
- omapdss_dpi_display_disable(dssdev);
-}
-
-static int sharp_lq_panel_probe(struct omap_dss_device *dssdev)
-{
-
- dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
- OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO;
- dssdev->panel.acb = 0x0;
- dssdev->panel.timings = sharp_lq_timings;
-
- return 0;
-}
-
-static void sharp_lq_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int sharp_lq_panel_enable(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- r = sharp_lq_panel_power_on(dssdev);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-}
-
-static void sharp_lq_panel_disable(struct omap_dss_device *dssdev)
-{
- sharp_lq_panel_power_off(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int sharp_lq_panel_suspend(struct omap_dss_device *dssdev)
-{
- sharp_lq_panel_power_off(dssdev);
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
- return 0;
-}
-
-static int sharp_lq_panel_resume(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- r = sharp_lq_panel_power_on(dssdev);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-}
-
-static struct omap_dss_driver sharp_lq_driver = {
- .probe = sharp_lq_panel_probe,
- .remove = sharp_lq_panel_remove,
-
- .enable = sharp_lq_panel_enable,
- .disable = sharp_lq_panel_disable,
- .suspend = sharp_lq_panel_suspend,
- .resume = sharp_lq_panel_resume,
-
- .driver = {
- .name = "sharp_lq_panel",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init sharp_lq_panel_drv_init(void)
-{
- return omap_dss_register_driver(&sharp_lq_driver);
-}
-
-static void __exit sharp_lq_panel_drv_exit(void)
-{
- omap_dss_unregister_driver(&sharp_lq_driver);
-}
-
-module_init(sharp_lq_panel_drv_init);
-module_exit(sharp_lq_panel_drv_exit);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * LCD panel driver for Toppoly TDO35S
- *
- * Copyright (C) 2009 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on generic panel support
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-
-#include <plat/display.h>
-
-static struct omap_video_timings toppoly_tdo_panel_timings = {
- /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
- .x_res = 480,
- .y_res = 640,
-
- .pixel_clock = 26000,
-
- .hfp = 104,
- .hsw = 8,
- .hbp = 8,
-
- .vfp = 4,
- .vsw = 2,
- .vbp = 2,
-};
-
-static int toppoly_tdo_panel_power_on(struct omap_dss_device *dssdev)
-{
- int r;
-
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
- return 0;
-
- r = omapdss_dpi_display_enable(dssdev);
- if (r)
- goto err0;
-
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- goto err1;
- }
-
- return 0;
-err1:
- omapdss_dpi_display_disable(dssdev);
-err0:
- return r;
-}
-
-static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
-{
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return;
-
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
- omapdss_dpi_display_disable(dssdev);
-}
-
-static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
-{
- dssdev->panel.config = OMAP_DSS_LCD_TFT |
- OMAP_DSS_LCD_IVS |
- OMAP_DSS_LCD_IHS |
- OMAP_DSS_LCD_IPC |
- OMAP_DSS_LCD_ONOFF;
-
- dssdev->panel.timings = toppoly_tdo_panel_timings;
-
- return 0;
-}
-
-static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- r = toppoly_tdo_panel_power_on(dssdev);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-}
-
-static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
-{
- toppoly_tdo_panel_power_off(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
-{
- toppoly_tdo_panel_power_off(dssdev);
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
- return 0;
-}
-
-static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- r = toppoly_tdo_panel_power_on(dssdev);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-}
-
-static struct omap_dss_driver generic_driver = {
- .probe = toppoly_tdo_panel_probe,
- .remove = toppoly_tdo_panel_remove,
-
- .enable = toppoly_tdo_panel_enable,
- .disable = toppoly_tdo_panel_disable,
- .suspend = toppoly_tdo_panel_suspend,
- .resume = toppoly_tdo_panel_resume,
-
- .driver = {
- .name = "toppoly_tdo35s_panel",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init toppoly_tdo_panel_drv_init(void)
-{
- return omap_dss_register_driver(&generic_driver);
-}
-
-static void __exit toppoly_tdo_panel_drv_exit(void)
-{
- omap_dss_unregister_driver(&generic_driver);
-}
-
-module_init(toppoly_tdo_panel_drv_init);
-module_exit(toppoly_tdo_panel_drv_exit);
-MODULE_LICENSE("GPL");
projects / cascardo / linux.git / commitdiff