D: Cobalt Networks (x86) support
D: This-and-That
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
N: Dirk Hohndel
E: hohndel@suse.de
D: The XFree86[tm] Project
--- /dev/null
+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+ system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+ carelessly the system would stop functioning, but with the right
+ steps, one can gate it and keep the system running. Consider this
+ simplified suspend example:
+
+ While the system is operational, you would see something like
+
+ 24MHz 32kHz
+ |
+ PLL1
+ \
+ \_ CPU Mux
+ |
+ [CPU]
+
+ When you are about to suspend, you switch the CPU Mux to the 32kHz
+ oscillator:
+
+ 24Mhz 32kHz
+ | |
+ PLL1 |
+ /
+ CPU Mux _/
+ |
+ [CPU]
+
+ Finally you can gate the main oscillator
+
+ 32kHz
+ |
+ |
+ /
+ CPU Mux _/
+ |
+ [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+ you can find it at
+
+ http://linux-sunxi.org/A10/CCM
+
+ The authoritative source for information at this time is the ccmu driver
+ released by Allwinner, you can find it at
+
+ https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu
};
Below is a matrix detailing which clk_ops are mandatory based upon the
-hardware capbilities of that clock. A cell marked as "y" means
+hardware capabilities of that clock. A cell marked as "y" means
mandatory, a cell marked as "n" implies that either including that
-callback is invalid or otherwise uneccesary. Empty cells are either
+callback is invalid or otherwise unnecessary. Empty cells are either
optional or must be evaluated on a case-by-case basis.
clock hardware characteristics
--- /dev/null
+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ clock@0xff000000 {
+ compatible = "adi,axi-clkgen";
+ #clock-cells = <0>;
+ reg = <0xff000000 0x1000>;
+ clocks = <&osc 1>;
+ };
--- /dev/null
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "allwinner,sun4i-osc-clk" - for a gatable oscillator
+ "allwinner,sun4i-pll1-clk" - for the main PLL clock
+ "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
+ "allwinner,sun4i-axi-clk" - for the AXI clock
+ "allwinner,sun4i-axi-gates-clk" - for the AXI gates
+ "allwinner,sun4i-ahb-clk" - for the AHB clock
+ "allwinner,sun4i-ahb-gates-clk" - for the AHB gates
+ "allwinner,sun4i-apb0-clk" - for the APB0 clock
+ "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
+ "allwinner,sun4i-apb1-clk" - for the APB1 clock
+ "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
+ "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0 except for
+ "allwinner,sun4i-*-gates-clk" where it shall be set to 1
+
+Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
+- clock-output-names : the corresponding gate names that the clock controls
+
+For example:
+
+osc24M: osc24M@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
+
+
+
+Gate clock outputs
+
+The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
+their corresponding offsets as present on sun4i are listed below. Note that
+some of these gates are not present on sun5i.
+
+ * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+ DRAM 0
+
+ * AHB gates ("allwinner,sun4i-ahb-gates-clk")
+
+ USB0 0
+ EHCI0 1
+ OHCI0 2*
+ EHCI1 3
+ OHCI1 4*
+ SS 5
+ DMA 6
+ BIST 7
+ MMC0 8
+ MMC1 9
+ MMC2 10
+ MMC3 11
+ MS 12**
+ NAND 13
+ SDRAM 14
+
+ ACE 16
+ EMAC 17
+ TS 18
+
+ SPI0 20
+ SPI1 21
+ SPI2 22
+ SPI3 23
+ PATA 24
+ SATA 25**
+ GPS 26*
+
+ VE 32
+ TVD 33
+ TVE0 34
+ TVE1 35
+ LCD0 36
+ LCD1 37
+
+ CSI0 40
+ CSI1 41
+
+ HDMI 43
+ DE_BE0 44
+ DE_BE1 45
+ DE_FE0 46
+ DE_FE1 47
+
+ MP 50
+
+ MALI400 52
+
+ * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
+
+ CODEC 0
+ SPDIF 1*
+ AC97 2
+ IIS 3
+
+ PIO 5
+ IR0 6
+ IR1 7
+
+ KEYPAD 10
+
+ * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
+
+ I2C0 0
+ I2C1 1
+ I2C2 2
+
+ CAN 4
+ SCR 5
+ PS20 6
+ PS21 7
+
+ UART0 16
+ UART1 17
+ UART2 18
+ UART3 19
+ UART4 20
+ UART5 21
+ UART6 22
+ UART7 23
+
+Notation:
+ [*]: The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code
--- /dev/null
+Allwinner Sunxi Interrupt Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sun4i-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+
+0: ENMI
+1: UART0
+2: UART1
+3: UART2
+4: UART3
+5: IR0
+6: IR1
+7: I2C0
+8: I2C1
+9: I2C2
+10: SPI0
+11: SPI1
+12: SPI2
+13: SPDIF
+14: AC97
+15: TS
+16: I2S
+17: UART4
+18: UART5
+19: UART6
+20: UART7
+21: KEYPAD
+22: TIMER0
+23: TIMER1
+24: TIMER2
+25: TIMER3
+26: CAN
+27: DMA
+28: PIO
+29: TOUCH_PANEL
+30: AUDIO_CODEC
+31: LRADC
+32: SDMC0
+33: SDMC1
+34: SDMC2
+35: SDMC3
+36: MEMSTICK
+37: NAND
+38: USB0
+39: USB1
+40: USB2
+41: SCR
+42: CSI0
+43: CSI1
+44: LCDCTRL0
+45: LCDCTRL1
+46: MP
+47: DEFEBE0
+48: DEFEBE1
+49: PMU
+50: SPI3
+51: TZASC
+52: PATA
+53: VE
+54: SS
+55: EMAC
+56: SATA
+57: GPS
+58: HDMI
+59: TVE
+60: ACE
+61: TVD
+62: PS2_0
+63: PS2_1
+64: USB3
+65: USB4
+66: PLE_PFM
+67: TIMER4
+68: TIMER5
+69: GPU_GP
+70: GPU_GPMMU
+71: GPU_PP0
+72: GPU_PPMMU0
+73: GPU_PMU
+74: GPU_RSV0
+75: GPU_RSV1
+76: GPU_RSV2
+77: GPU_RSV3
+78: GPU_RSV4
+79: GPU_RSV5
+80: GPU_RSV6
+82: SYNC_TIMER0
+83: SYNC_TIMER1
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "allwinner,sun4i-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
+++ /dev/null
-Allwinner Sunxi Interrupt Controller
-
-Required properties:
-
-- compatible : should be "allwinner,sunxi-ic"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value shall be 1.
-
-The interrupt sources are as follows:
-
-0: ENMI
-1: UART0
-2: UART1
-3: UART2
-4: UART3
-5: IR0
-6: IR1
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-13: SPDIF
-14: AC97
-15: TS
-16: I2S
-17: UART4
-18: UART5
-19: UART6
-20: UART7
-21: KEYPAD
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-26: CAN
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: SDMC0
-33: SDMC1
-34: SDMC2
-35: SDMC3
-36: MEMSTICK
-37: NAND
-38: USB0
-39: USB1
-40: USB2
-41: SCR
-42: CSI0
-43: CSI1
-44: LCDCTRL0
-45: LCDCTRL1
-46: MP
-47: DEFEBE0
-48: DEFEBE1
-49: PMU
-50: SPI3
-51: TZASC
-52: PATA
-53: VE
-54: SS
-55: EMAC
-56: SATA
-57: GPS
-58: HDMI
-59: TVE
-60: ACE
-61: TVD
-62: PS2_0
-63: PS2_1
-64: USB3
-65: USB4
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1
-
-Example:
-
-intc: interrupt-controller {
- compatible = "allwinner,sunxi-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <2>;
-};
4 = active high level-sensitive
8 = active low level-sensitive
-Optional parent device properties:
-- reg : contains the PRCMU mailbox address for the AB8500 i2c port
-
The AB8500 consists of a large and varied group of sub-devices:
Device IRQ Names Supply Names Description
- stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
- stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-ab8500@5 {
+ab8500 {
compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
--- /dev/null
+Allwinner A1X SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sun4i-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer
+- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
+
+Example:
+
+timer {
+ compatible = "allwinner,sun4i-timer";
+ reg = <0x01c20c00 0x400>;
+ interrupts = <22>;
+ clocks = <&osc>;
+};
+++ /dev/null
-Allwinner A1X SoCs Timer Controller
-
-Required properties:
-
-- compatible : should be "allwinner,sunxi-timer"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : The interrupt of the first timer
-- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
-
-Example:
-
-timer {
- compatible = "allwinner,sunxi-timer";
- reg = <0x01c20c00 0x400>;
- interrupts = <22>;
- clocks = <&osc>;
-};
- "nvidia,tegra20-uart"
- "nxp,lpc3220-uart"
- "ibm,qpace-nwp-serial"
+ - "altr,16550-FIFO32"
+ - "altr,16550-FIFO64"
+ - "altr,16550-FIFO128"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
--- /dev/null
+Allwinner sun4i Watchdog timer
+
+Required properties:
+
+- compatible : should be "allwinner,sun4i-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@01c20c90 {
+ compatible = "allwinner,sun4i-wdt";
+ reg = <0x01c20c90 0x10>;
+};
+++ /dev/null
-Allwinner sunXi Watchdog timer
-
-Required properties:
-
-- compatible : should be "allwinner,sunxi-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Example:
-
-wdt: watchdog@01c20c90 {
- compatible = "allwinner,sunxi-wdt";
- reg = <0x01c20c90 0x10>;
-};
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
* Microchip (TelCom) TCN75
- Prefix: 'lm75'
+ Prefix: 'tcn75'
Addresses scanned: none
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/
Documentation:
http://www.diolan.com/i2c/u2c12.html
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
Introduction
------------
-
-Currently the ALPS touchpad driver supports four protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
-protocol versions is contained in the following sections.
+Currently the ALPS touchpad driver supports five protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, 4 and 5.
+
+Since roughly mid-2010 several new ALPS touchpads have been released and
+integrated into a variety of laptops and netbooks. These new touchpads
+have enough behavior differences that the alps_model_data definition
+table, describing the properties of the different versions, is no longer
+adequate. The design choices were to re-define the alps_model_data
+table, with the risk of regression testing existing devices, or isolate
+the new devices outside of the alps_model_data table. The latter design
+choice was made. The new touchpad signatures are named: "Rushmore",
+"Pinnacle", and "Dolphin", which you will see in the alps.c code.
+For the purposes of this document, this group of ALPS touchpads will
+generically be called "new ALPS touchpads".
+
+We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
+(Compatibility ID) definition as a way to uniquely identify the
+different ALPS variants but there did not appear to be a 1:1 mapping.
+In fact, it appeared to be an m:n mapping between the _HID and actual
+hardware type.
Detection
---------
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
matched against known models in the alps_model_data_array.
-With protocol versions 3 and 4, the E7 report model signature is always
-73-02-64. To differentiate between these versions, the response from the
-"Enter Command Mode" sequence must be inspected as described below.
+For older touchpads supporting protocol versions 3 and 4, the E7 report
+model signature is always 73-02-64. To differentiate between these
+versions, the response from the "Enter Command Mode" sequence must be
+inspected as described below.
+
+The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
+seem to be better differentiated by the EC Command Mode response.
Command Mode
------------
register. Registers are written by writing the value one nibble at a time
using the same encoding used for addresses.
+For the new ALPS touchpads, the EC command is used to enter command
+mode. The response in the new ALPS touchpads is significantly different,
+and more important in determining the behavior. This code has been
+separated from the original alps_model_data table and put in the
+alps_identify function. For example, there seem to be two hardware init
+sequences for the "Dolphin" touchpads as determined by the second byte
+of the EC response.
+
Packet Format
-------------
well.
So far no v4 devices with tracksticks have been encountered.
+
+ALPS Absolute Mode - Protocol Version 5
+---------------------------------------
+This is basically Protocol Version 3 but with different logic for packet
+decode. It uses the same alps_process_touchpad_packet_v3 call with a
+specialized decode_fields function pointer to correctly interpret the
+packets. This appears to only be used by the Dolphin devices.
+
+For single-touch, the 6-byte packet format is:
+
+ byte 0: 1 1 0 0 1 0 0 0
+ byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ byte 2: 0 y6 y5 y4 y3 y2 y1 y0
+ byte 3: 0 M R L 1 m r l
+ byte 4: y10 y9 y8 y7 x10 x9 x8 x7
+ byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+
+For mt, the format is:
+
+ byte 0: 1 1 1 n3 1 n2 n1 x24
+ byte 1: 1 y7 y6 y5 y4 y3 y2 y1
+ byte 2: ? x2 x1 y12 y11 y10 y9 y8
+ byte 3: 0 x23 x22 x21 x20 x19 x18 x17
+ byte 4: 0 x9 x8 x7 x6 x5 x4 x3
+ byte 5: 0 x16 x15 x14 x13 x12 x11 x10
enabled and the variable is automatically set to 2, otherwise
the strategy is disabled and the variable is set to 1.
+backup_only - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ If set, disable the director function while the server is
+ in backup mode to avoid packet loops for DR/TUN methods.
+
conntrack - BOOLEAN
0 - disabled (default)
not 0 - enabled
Proto [2 bytes]
Raw protocol(IP, IPv6, etc) frame.
+ 3.3 Multiqueue tuntap interface:
+
+ From version 3.8, Linux supports multiqueue tuntap which can uses multiple
+ file descriptors (queues) to parallelize packets sending or receiving. The
+ device allocation is the same as before, and if user wants to create multiple
+ queues, TUNSETIFF with the same device name must be called many times with
+ IFF_MULTI_QUEUE flag.
+
+ char *dev should be the name of the device, queues is the number of queues to
+ be created, fds is used to store and return the file descriptors (queues)
+ created to the caller. Each file descriptor were served as the interface of a
+ queue which could be accessed by userspace.
+
+ #include <linux/if.h>
+ #include <linux/if_tun.h>
+
+ int tun_alloc_mq(char *dev, int queues, int *fds)
+ {
+ struct ifreq ifr;
+ int fd, err, i;
+
+ if (!dev)
+ return -1;
+
+ memset(&ifr, 0, sizeof(ifr));
+ /* Flags: IFF_TUN - TUN device (no Ethernet headers)
+ * IFF_TAP - TAP device
+ *
+ * IFF_NO_PI - Do not provide packet information
+ * IFF_MULTI_QUEUE - Create a queue of multiqueue device
+ */
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
+ strcpy(ifr.ifr_name, dev);
+
+ for (i = 0; i < queues; i++) {
+ if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
+ goto err;
+ err = ioctl(fd, TUNSETIFF, (void *)&ifr);
+ if (err) {
+ close(fd);
+ goto err;
+ }
+ fds[i] = fd;
+ }
+
+ return 0;
+ err:
+ for (--i; i >= 0; i--)
+ close(fds[i]);
+ return err;
+ }
+
+ A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
+ calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
+ calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
+ enabled by default after it was created through TUNSETIFF.
+
+ fd is the file descriptor (queue) that we want to enable or disable, when
+ enable is true we enable it, otherwise we disable it
+
+ #include <linux/if.h>
+ #include <linux/if_tun.h>
+
+ int tun_set_queue(int fd, int enable)
+ {
+ struct ifreq ifr;
+
+ memset(&ifr, 0, sizeof(ifr));
+
+ if (enable)
+ ifr.ifr_flags = IFF_ATTACH_QUEUE;
+ else
+ ifr.ifr_flags = IFF_DETACH_QUEUE;
+
+ return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
+ }
+
Universal TUN/TAP device driver Frequently Asked Question.
1. What platforms are supported by TUN/TAP driver ?
models depending on the codec chip. The list of available models
is found in HD-Audio-Models.txt
- The model name "genric" is treated as a special case. When this
+ The model name "generic" is treated as a special case. When this
model is given, the driver uses the generic codec parser without
"codec-patch". It's sometimes good for testing and debugging.
<H4>
7.2.4 Close Callback</H4>
The <TT>close</TT> callback is called when this device is closed by the
-applicaion. If any private data was allocated in open callback, it must
+application. If any private data was allocated in open callback, it must
be released in the close callback. The deletion of ALSA port should be
done here, too. This callback must not be NULL.
<H4>
status\input | 0 | 1 | else |
--------------+------------+------------+------------+
- not allocated |(do nothing)| alloc+swap | EINVAL |
+ not allocated |(do nothing)| alloc+swap |(do nothing)|
--------------+------------+------------+------------+
allocated | free | swap | clear |
--------------+------------+------------+------------+
F: drivers/platform/x86/asus*.c
F: drivers/platform/x86/eeepc*.c
-ASUS ASB100 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: lm-sensors@lm-sensors.org
-S: Maintained
-F: drivers/hwmon/asb100.c
-
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <djbw@fb.com>
W: http://sourceforge.net/projects/xscaleiop
F: drivers/dma/at_hdmac_regs.h
F: include/linux/platform_data/dma-atmel.h
+ATMEL I2C DRIVER
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
+L: linux-i2c@vger.kernel.org
+S: Supported
+F: drivers/i2c/busses/i2c-at91.c
+
ATMEL ISI DRIVER
M: Josh Wu <josh.wu@atmel.com>
L: linux-media@vger.kernel.org
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Daniel Vetter <daniel.vetter@ffwll.ch>
-L: intel-gfx@lists.freedesktop.org (subscribers-only)
+L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
T: git git://people.freedesktop.org/~danvet/drm-intel
S: Supported
F: drivers/base/firmware*.c
F: include/linux/firmware.h
+FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
+M: Joshua Morris <josh.h.morris@us.ibm.com>
+M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
+S: Maintained
+F: drivers/block/rsxx/
+
FLOPPY DRIVER
M: Jiri Kosina <jkosina@suse.cz>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
F: Documentation/i2c/busses/i2c-ismt
I2C/SMBUS STUB DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-stub.c
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
+INA209 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/ina209
+F: Documentation/devicetree/bindings/i2c/ina209.txt
+F: drivers/hwmon/ina209.c
+
+INA2XX HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/ina2xx
+F: drivers/hwmon/ina2xx.c
+F: include/linux/platform_data/ina2xx.h
+
INDUSTRY PACK SUBSYSTEM (IPACK)
M: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
M: Jens Taprogge <jens.taprogge@taprogge.org>
F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c
+MAX6697 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/max6697
+F: Documentation/devicetree/bindings/i2c/max6697.txt
+F: drivers/hwmon/max6697.c
+F: include/linux/platform_data/max6697.h
+
MAXIRADIO FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
F: drivers/video/riva/
F: drivers/video/nvidia/
+NVM EXPRESS DRIVER
+M: Matthew Wilcox <willy@linux.intel.com>
+L: linux-nvme@lists.infradead.org
+T: git git://git.infradead.org/users/willy/linux-nvme.git
+S: Supported
+F: drivers/block/nvme.c
+F: include/linux/nvme.h
+
OMAP SUPPORT
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
F: arch/arm/*omap*/*clock*
OMAP POWER MANAGEMENT SUPPORT
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
OMAP GPIO DRIVER
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-omap.c
F: drivers/power/
PNP SUPPORT
-M: Adam Belay <abelay@mit.edu>
+M: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
M: Bjorn Helgaas <bhelgaas@google.com>
S: Maintained
F: drivers/pnp/
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
+M: Rajesh Borundia <rajesh.borundia@qlogic.com>
+M: Shahed Shaikh <shahed.shaikh@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com
F: Documentation/blockdev/ramdisk.txt
F: drivers/block/brd.c
-RAMSAM DRIVER (IBM RamSan 70/80 PCI SSD Flash Card)
-M: Joshua Morris <josh.h.morris@us.ibm.com>
-M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
-S: Maintained
-F: drivers/block/rsxx/
-
RANDOM NUMBER DRIVER
M: Theodore Ts'o" <tytso@mit.edu>
S: Maintained
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Maintained
F: drivers/net/ethernet/sis/sis900.*
-SIS 96X I2C/SMBUS DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: Documentation/i2c/busses/i2c-sis96x
-F: drivers/i2c/busses/i2c-sis96x.c
-
SIS FRAMEBUFFER DRIVER
M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.net/linuxsisvga.shtml
F: drivers/hwmon/sch5627.c
SMSC47B397 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
-L: linux-snps-arc@vger.kernel.org
S: Supported
F: arch/arc/
+F: Documentation/devicetree/bindings/arc/
+F: drivers/tty/serial/arc-uart.c
SYSV FILESYSTEM
M: Christoph Hellwig <hch@infradead.org>
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
NAME = Unicycling Gorilla
# *DOCUMENTATION*
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
-config HAVE_VIRT_TO_BUS
- bool
- help
- An architecture should select this if it implements the
- deprecated interface virt_to_bus(). All new architectures
- should probably not select this.
-
config HAVE_ARCH_SECCOMP_FILTER
bool
help
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
int i;
for_each_sg(sg, s, nents, i)
- sg->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+ s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
s->length, dir);
return nents;
*/
#define ELF_PLATFORM (NULL)
-#define SET_PERSONALITY(ex) \
- set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-
#endif
*-------------------------------------------------------------*/
.macro SAVE_ALL_EXCEPTION marker
- st \marker, [sp, 8]
+ st \marker, [sp, 8] /* orig_r8 */
st r0, [sp, 4] /* orig_r0, needed only for sys calls */
/* Restore r9 used to code the early prologue */
#ifdef CONFIG_KGDB
-#include <asm/user.h>
+#include <asm/ptrace.h>
/* to ensure compatibility with Linux 2.6.35, we don't implement the get/set
* register API yet */
};
#else
-static inline void kgdb_trap(struct pt_regs *regs, int param)
-{
-}
+#define kgdb_trap(regs, param)
#endif
#endif /* __ARC_KGDB_H__ */
#define orig_r8_IS_SCALL 0x0001
#define orig_r8_IS_SCALL_RESTARTED 0x0002
#define orig_r8_IS_BRKPT 0x0004
-#define orig_r8_IS_EXCPN 0x0004
+#define orig_r8_IS_EXCPN 0x0008
#define orig_r8_IS_IRQ1 0x0010
#define orig_r8_IS_IRQ2 0x0020
#include <linux/types.h>
int sys_clone_wrapper(int, int, int, int, int);
-int sys_fork_wrapper(void);
-int sys_vfork_wrapper(void);
int sys_cacheflush(uint32_t, uint32_t uint32_t);
int sys_arc_settls(void *);
int sys_arc_gettls(void);
*/
struct user_regs_struct {
- struct scratch {
+ struct {
long pad;
long bta, lp_start, lp_end, lp_count;
long status32, ret, blink, fp, gp;
long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
long sp;
} scratch;
- struct callee {
+ struct {
long pad;
long r25, r24, r23, r22, r21, r20;
long r19, r18, r17, r16, r15, r14, r13;
; using ERET won't work since next-PC has already committed
lr r12, [efa]
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11
- st r12, [r11, THREAD_FAULT_ADDR]
+ st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address
; PRE Sys Call Ptrace hook
mov r0, sp ; pt_regs needed
;################### Special Sys Call Wrappers ##########################
-; TBD: call do_fork directly from here
-ARC_ENTRY sys_fork_wrapper
- SAVE_CALLEE_SAVED_USER
- bl @sys_fork
- DISCARD_CALLEE_SAVED_USER
-
- GET_CURR_THR_INFO_FLAGS r10
- btst r10, TIF_SYSCALL_TRACE
- bnz tracesys_exit
-
- b ret_from_system_call
-ARC_EXIT sys_fork_wrapper
-
-ARC_ENTRY sys_vfork_wrapper
- SAVE_CALLEE_SAVED_USER
- bl @sys_vfork
- DISCARD_CALLEE_SAVED_USER
-
- GET_CURR_THR_INFO_FLAGS r10
- btst r10, TIF_SYSCALL_TRACE
- bnz tracesys_exit
-
- b ret_from_system_call
-ARC_EXIT sys_vfork_wrapper
-
ARC_ENTRY sys_clone_wrapper
SAVE_CALLEE_SAVED_USER
bl @sys_clone
*/
#include <linux/kgdb.h>
+#include <linux/sched.h>
#include <asm/disasm.h>
#include <asm/cacheflush.h>
n += scnprintf(buf + n, len - n, "\n");
-#ifdef _ASM_GENERIC_UNISTD_H
n += scnprintf(buf + n, len - n,
- "OS ABI [v2]\t: asm-generic/{unistd,stat,fcntl}\n");
-#endif
+ "OS ABI [v3]\t: no-legacy-syscalls\n");
return buf;
}
#include <asm/syscalls.h>
#define sys_clone sys_clone_wrapper
-#define sys_fork sys_fork_wrapper
-#define sys_vfork sys_vfork_wrapper
#undef __SYSCALL
#define __SYSCALL(nr, call) [nr] = (call),
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select HAVE_CLK_PREPARE
select MULTI_IRQ_HANDLER
select PINCTRL
select SPARSE_IRQ
+ select STMP_DEVICE
select USE_OF
help
Support for Freescale MXS-based family of processors
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT
+ select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
+ select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
bool
config ARCH_MULTI_V6
- bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
config ARCH_MULTI_V7
- bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select ARCH_VEXPRESS
config ARM_TIMER_SP804
bool
select CLKSRC_MMIO
- select HAVE_SCHED_CLOCK
source arch/arm/mm/Kconfig
bool
select ISA_DMA_API
-config ARCH_NO_VIRT_TO_BUS
- def_bool y
- depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
# Select ISA DMA interface
config ISA_DMA_API
bool
config HAVE_ARM_TWD
bool
depends on SMP
+ select CLKSRC_OF if OF
help
This options enables support for the ARM timer and watchdog unit
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 355 if ARCH_U8500
- default 264 if MACH_H4700
default 512 if SOC_OMAP5
+ default 355 if ARCH_U8500
default 288 if ARCH_VT8500 || ARCH_SUNXI
+ default 264 if MACH_H4700
default 0
help
Maximum number of GPIOs in the system.
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
- depends on ARM && OF
+ depends on ARM && AEABI && OF
depends on CPU_V7 && !CPU_V6
+ depends on !GENERIC_ATOMIC64
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
source "drivers/cpufreq/Kconfig"
-config CPU_FREQ_IMX
- tristate "CPUfreq driver for i.MX CPUs"
- depends on ARCH_MXC && CPU_FREQ
- select CPU_FREQ_TABLE
- help
- This enables the CPUfreq driver for i.MX CPUs.
-
config CPU_FREQ_SA1100
bool
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX50_IMX53_UART || \
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
+ depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
-subdir- := bootp compressed
+subdir- := bootp compressed dts
status = "okay";
/* No CD or WP GPIOs */
};
+
+ usb@d0050000 {
+ status = "okay";
+ };
+
+ usb@d0051000 {
+ status = "okay";
+ };
};
};
mpic: interrupt-controller@d0020000 {
compatible = "marvell,mpic";
#interrupt-cells = <1>;
- #address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
};
reg = <0xd0012000 0x100>;
reg-shift = <2>;
interrupts = <41>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
serial@d0012100 {
reg = <0xd0012100 0x100>;
reg-shift = <2>;
interrupts = <42>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
reg = <0xd0012200 0x100>;
reg-shift = <2>;
interrupts = <43>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
serial@d0012300 {
reg = <0xd0012300 0x100>;
reg-shift = <2>;
interrupts = <44>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
nand {
pinctrl_nand: nand-0 {
atmel,pins =
- <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */
- 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ <3 0 0x1 0x0 /* PD0 periph A Read Enable */
+ 3 1 0x1 0x0 /* PD1 periph A Write Enable */
+ 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */
+ 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */
+ 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
+ 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */
+ 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */
+ 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */
+ 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */
+ 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */
+ 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */
+ 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */
+ 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */
+ 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */
+ };
+
+ pinctrl_nand_16bits: nand_16bits-0 {
+ atmel,pins =
+ <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */
+ 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */
+ 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */
+ 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */
+ 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */
+ 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */
+ 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */
+ 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */
};
};
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
- clock-frequency = <150000000>;
+ clock-frequency = <250000000>;
};
};
};
};
};
- ab8500@5 {
+ ab8500 {
compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
interrupt-parent = <&intc>;
interrupts = <0 40 0x4>;
interrupt-controller;
status = "disabled";
};
+ rtc@d8500 {
+ compatible = "marvell,orion-rtc";
+ reg = <0xd8500 0x20>;
+ };
+
crypto: crypto@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
};
};
};
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
digctl@8001c000 {
+ compatible = "fsl,imx23-digctl";
reg = <0x8001c000 2000>;
status = "disabled";
};
};
ocotp@8002c000 {
+ compatible = "fsl,ocotp";
reg = <0x8002c000 0x2000>;
status = "disabled";
};
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx23-clkctrl";
+ compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
compatible = "fsl,imx23-timrot", "fsl,timrot";
reg = <0x80068000 0x2000>;
interrupts = <28 29 30 31>;
+ clocks = <&clks 28>;
};
auart0: serial@8006c000 {
};
digctl@8001c000 {
+ compatible = "fsl,imx28-digctl";
reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
ocotp@8002c000 {
+ compatible = "fsl,ocotp";
reg = <0x8002c000 0x2000>;
status = "disabled";
};
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx28-clkctrl";
+ compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
compatible = "fsl,imx28-timrot", "fsl,timrot";
reg = <0x80068000 0x2000>;
interrupts = <48 49 50 51>;
+ clocks = <&clks 26>;
};
auart0: serial@8006a000 {
fsl,pins = <689 0x10000 /* DISP1_DRDY */
482 0x10000 /* DISP1_HSYNC */
489 0x10000 /* DISP1_VSYNC */
- 684 0x10000 /* DISP1_DAT_0 */
515 0x10000 /* DISP1_DAT_22 */
523 0x10000 /* DISP1_DAT_23 */
- 543 0x10000 /* DISP1_DAT_21 */
+ 545 0x10000 /* DISP1_DAT_21 */
553 0x10000 /* DISP1_DAT_20 */
558 0x10000 /* DISP1_DAT_19 */
564 0x10000 /* DISP1_DAT_18 */
ocp@f1000000 {
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
serial@12100 {
- clock-frequency = <166666667>;
status = "okay";
};
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
ocp@f1000000 {
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
};
ocp@f1000000 {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
ocp@f1000000 {
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
serial@12100 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
+ clocks = <&gate_clk 7>;
};
gpio1: gpio@10140 {
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
+ clocks = <&gate_clk 7>;
};
serial@12000 {
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
- /* set clock-frequency in board dts */
status = "disabled";
};
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
- /* set clock-frequency in board dts */
status = "disabled";
};
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
+ clocks = <&gate_clk 7>;
};
spi@10600 {
/ {
model = "LaCie Ethernet Disk mini V2";
- compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
+ compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
reg = <0x00000000 0x4000000>; /* 64 MB */
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
compatible = "arm,pl330", "arm,primecell";
reg = <0xffe01000 0x1000>;
interrupts = <0 180 4>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
};
pmc {
- compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc";
+ compatible = "nvidia,tegra114-pmc";
reg = <0x7000e400 0x400>;
};
};
sdhci@c8000600 {
- cd-gpios = <&gpio 23 0>; /* gpio PC7 */
+ cd-gpios = <&gpio 23 1>; /* gpio PC7 */
};
sound {
sdhci@c8000200 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <4>;
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
sdhci@c8000000 {
status = "okay";
- cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+ cd-gpios = <&gpio 173 1>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
};
sdhci@c8000600 {
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
bus-width = <4>;
status = "okay";
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+ cd-gpios = <&gpio 121 1>; /* gpio PP1 */
wp-gpios = <&gpio 122 0>; /* gpio PP2 */
bus-width = <4>;
};
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
sdhci@c8000400 {
status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
};
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0x304>;
+ clocks = <&tegra_car 132>;
};
intc: interrupt-controller {
0 1 0x04
0 41 0x04
0 42 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
i2c@7000c000 {
spi@7000d800 {
compatible = "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0xf04>;
+ clocks = <&tegra_car 214>;
};
intc: interrupt-controller {
0 42 0x04
0 121 0x04
0 122 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
i2c@7000c000 {
spi@7000d800 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
};
pmc {
- compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+ compatible = "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
};
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
CONFIG_AEABI=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_USB_A9G20=y
CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_STORAGE=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
void handle_IRQ(unsigned int, struct pt_regs *);
void init_IRQ(void);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
+#endif
+
#endif
#endif
extern void init_FIQ(int);
extern int show_fiq_list(struct seq_file *, int);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-extern void (*handle_arch_irq)(struct pt_regs *);
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-#endif
-
/*
* This is for easy migration, but should be changed in the source
*/
raw_spin_unlock(&desc->lock); \
} while(0)
-#ifndef __ASSEMBLY__
-/*
- * Entry/exit functions for chained handlers where the primary IRQ chip
- * may implement either fasteoi or level-trigger flow control.
- */
-static inline void chained_irq_enter(struct irq_chip *chip,
- struct irq_desc *desc)
-{
- /* FastEOI controllers require no action on entry. */
- if (chip->irq_eoi)
- return;
-
- if (chip->irq_mask_ack) {
- chip->irq_mask_ack(&desc->irq_data);
- } else {
- chip->irq_mask(&desc->irq_data);
- if (chip->irq_ack)
- chip->irq_ack(&desc->irq_data);
- }
-}
-
-static inline void chained_irq_exit(struct irq_chip *chip,
- struct irq_desc *desc)
-{
- if (chip->irq_eoi)
- chip->irq_eoi(&desc->irq_data);
- else
- chip->irq_unmask(&desc->irq_data);
-}
-#endif
-
#endif
int twd_local_timer_register(struct twd_local_timer *);
-#ifdef CONFIG_HAVE_ARM_TWD
-void twd_local_timer_of_register(void);
-#else
-static inline void twd_local_timer_of_register(void)
-{
-}
-#endif
-
#endif
#define _ASM_ARM_XEN_EVENTS_H
#include <asm/ptrace.h>
+#include <asm/atomic.h>
enum ipi_vector {
XEN_PLACEHOLDER_VECTOR,
return raw_irqs_disabled_flags(regs->ARM_cpsr);
}
-/*
- * We cannot use xchg because it does not support 8-byte
- * values. However it is safe to use {ldr,dtd}exd directly because all
- * platforms which Xen can run on support those instructions.
- */
-static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val)
-{
- xen_ulong_t oldval;
- unsigned int tmp;
-
- wmb();
- asm volatile("@ xchg_xen_ulong\n"
- "1: ldrexd %0, %H0, [%3]\n"
- " strexd %1, %2, %H2, [%3]\n"
- " teq %1, #0\n"
- " bne 1b"
- : "=&r" (oldval), "=&r" (tmp)
- : "r" (val), "r" (ptr)
- : "memory", "cc");
- return oldval;
-}
+#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \
+ atomic64_t, \
+ counter), (val))
#endif /* _ASM_ARM_XEN_EVENTS_H */
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/init.h>
void __init init_IRQ(void)
{
- machine_desc->init_irq();
+ if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
+ irqchip_init();
+ else
+ machine_desc->init_irq();
}
#ifdef CONFIG_MULTI_IRQ_HANDLER
evt->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DUMMY;
- evt->rating = 400;
+ evt->rating = 100;
evt->mult = 1;
evt->set_mode = broadcast_timer_set_mode;
}
#ifdef CONFIG_OF
-const static struct of_device_id twd_of_match[] __initconst = {
- { .compatible = "arm,cortex-a9-twd-timer", },
- { .compatible = "arm,cortex-a5-twd-timer", },
- { .compatible = "arm,arm11mp-twd-timer", },
- { },
-};
-
-void __init twd_local_timer_of_register(void)
+static void __init twd_local_timer_of_register(struct device_node *np)
{
- struct device_node *np;
int err;
if (!is_smp() || !setup_max_cpus)
return;
- np = of_find_matching_node(NULL, twd_of_match);
- if (!np)
- return;
-
twd_ppi = irq_of_parse_and_map(np, 0);
if (!twd_ppi) {
err = -EINVAL;
out:
WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
}
+CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
#endif
.text
.align 5
- .word 0
-
-1: subs r2, r2, #4 @ 1 do we have enough
- blt 5f @ 1 bytes to align with?
- cmp r3, #2 @ 1
- strltb r1, [ip], #1 @ 1
- strleb r1, [ip], #1 @ 1
- strb r1, [ip], #1 @ 1
- add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted. Try doing the
- * memset again.
- */
ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
- mov ip, r0
- ands r3, ip, #3 @ 1 unaligned?
- bne 1b @ 1
+ ands r3, r0, #3 @ 1 unaligned?
+ mov ip, r0 @ preserve r0 as return value
+ bne 6f @ 1
/*
* we know that the pointer in ip is aligned to a word boundary.
*/
- orr r1, r1, r1, lsl #8
+1: orr r1, r1, r1, lsl #8
orr r1, r1, r1, lsl #16
mov r3, r1
cmp r2, #16
tst r2, #1
strneb r1, [ip], #1
mov pc, lr
+
+6: subs r2, r2, #4 @ 1 do we have enough
+ blt 5b @ 1 bytes to align with?
+ cmp r3, #2 @ 1
+ strltb r1, [ip], #1 @ 1
+ strleb r1, [ip], #1 @ 1
+ strb r1, [ip], #1 @ 1
+ add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
+ b 1b
ENDPROC(memset)
if ARCH_AT91
-config HAVE_AT91_DATAFLASH_CARD
- bool
-
config HAVE_AT91_DBGU0
bool
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
-choice
- prompt "Atmel AT91 Processor Devices for non DT boards"
-
-config ARCH_AT91_NONE
- bool "None"
-
-config ARCH_AT91RM9200
- bool "AT91RM9200"
- select SOC_AT91RM9200
-
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9261
- bool "AT91SAM9261"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
- bool "AT91SAM9G10"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9263
- bool "AT91SAM9263"
- select SOC_AT91SAM9263
-
-config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
- select SOC_AT91SAM9RL
-
-config ARCH_AT91SAM9G20
- bool "AT91SAM9G20"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9G45
- bool "AT91SAM9G45"
- select SOC_AT91SAM9G45
-
-config ARCH_AT91X40
- bool "AT91x40"
- depends on !MMU
- select ARCH_USES_GETTIMEOFFSET
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-endchoice
-
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
# ----------------------------------------------------------
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
- bool "Ajeco 1ARM Single Board Computer"
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
-
-config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
- bool "Cogent CSB337"
- help
- Select this if you are using Cogent's CSB337 board.
- <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
- bool "Cogent CSB637"
- help
- Select this if you are using Cogent's CSB637 board.
- <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
- bool "Conitec ARM&EVA"
- help
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
- bool "Embest ATEB9200"
- help
- Select this if you are using Embest's ATEB9200 board.
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
- bool "KwikByte KB920x"
- help
- Select this if you are using KwikByte's KB920x board.
- <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
- bool "picotux 200"
- help
- Select this if you are using a picotux 200.
- <http://www.picotux.com/>
-
-config MACH_KAFA
- bool "Sperry-Sun KAFA board"
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
- bool "emQbit ECB_AT91 SBC"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using emQbit's ECB_AT91 board.
- <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
- bool "ucDragon YL-9200"
- help
- Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
- bool "Eukrea CPUAT91"
- help
- Select this if you are using the Eukrea Electromatique's
- CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
- bool "eco920"
- help
- Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
- bool "RSI Embedded Webserver"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
- bool "KwikByte KB9260 (CAM60) board"
- help
- Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
- <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
- bool "Olimex SAM9-L9260 board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
- <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
- bool "Custom afeb9260 board v1"
- help
- Select this if you are using custom afeb9260 board based on
- open hardware design. Select this for revision 1 of the board.
- <svn://194.85.238.22/home/users/george/svn/arm9eb>
- <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
- bool "CALAO USB-A9260"
- help
- Select this if you are using a Calao Systems USB-A9260.
- <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
- bool "CALAO QIL-A9260 board"
- help
- Select this if you are using a Calao Systems QIL-A9260 Board.
- <http://www.calao-systems.com>
-
-config MACH_CPU9260
- bool "Eukrea CPU9260 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
- bool "Flexibity Connect board"
- help
- Select this if you are using Flexibity Connect board
- <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
- bool "CALAO USB-A9263"
- help
- Select this if you are using a Calao Systems USB-A9263.
- <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- help
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
- depends on MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
- onwards.
- <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
- bool "Eukrea CPU9G20 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
- bool "Acme Systems srl FOX Board G20"
- help
- Select this if you are using Acme Systems
- FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
- bool "taskit PortuxG20"
- help
- Select this if you are using taskit's PortuxG20.
- <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
- bool "taskit Stamp9G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on its
- evaluation board.
- <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
- bool "PControl G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, beeing the decentralized unit of a building automation
- system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
- bool "GS_IA18_S board"
- help
- This enables support for the GS_IA18_S board
- produced by GeoSIG Ltd company. This is an internet accelerograph.
- <http://www.geosig.com>
-
-config MACH_USB_A9G20
- bool "CALAO USB-A9G20"
- depends on ARCH_AT91SAM9G20
- help
- Select this if you are using a Calao Systems USB-A9G20.
- <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
- bool "Bluewater Systems Snapper 9260/9G20 module"
- help
- Select this if you are using the Bluewater Systems Snapper 9260 or
- Snapper 9G20 modules.
- <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
- bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
- help
- Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
- Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
- families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
- <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
- bool "Atmel AT91EB01 Evaluation Kit"
- help
- Select this if you are using Atmel's AT91EB01 Evaluation Kit.
- It is also a popular target for simulators such as GDB's
- ARM simulator (commonly known as the ARMulator) and the
- Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
+source arch/arm/mach-at91/Kconfig.non_dt
comment "Generic Board Type"
Select this if you want to experiment device-tree with
an Atmel RM9200 Evaluation Kit.
-config MACH_AT91SAM_DT
+config MACH_AT91SAM9_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
depends on SOC_AT91SAM9
select USE_OF
# ----------------------------------------------------------
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
- depends on HAVE_AT91_DATAFLASH_CARD
- help
- Enable support for the DataFlash card.
-
-# ----------------------------------------------------------
-
comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
--- /dev/null
+menu "Atmel Non-DT world"
+
+config HAVE_AT91_DATAFLASH_CARD
+ bool
+
+choice
+ prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+ bool "None"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+ select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260 or AT91SAM9XE"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9263
+ bool "AT91SAM9263"
+ select SOC_AT91SAM9263
+
+config ARCH_AT91SAM9RL
+ bool "AT91SAM9RL"
+ select SOC_AT91SAM9RL
+
+config ARCH_AT91SAM9G20
+ bool "AT91SAM9G20"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9G45
+ bool "AT91SAM9G45"
+ select SOC_AT91SAM9G45
+
+config ARCH_AT91X40
+ bool "AT91x40"
+ depends on !MMU
+ select ARCH_USES_GETTIMEOFFSET
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+ bool "Ajeco 1ARM Single Board Computer"
+ help
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/>
+
+config ARCH_AT91RM9200DK
+ bool "Atmel AT91RM9200-DK Development board"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
+config MACH_AT91RM9200EK
+ bool "Atmel AT91RM9200-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+ bool "Cogent CSB337"
+ help
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+ bool "Cogent CSB637"
+ help
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+ bool "Conitec ARM&EVA"
+ help
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.php>
+
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
+ help
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+ bool "KwikByte KB920x"
+ help
+ Select this if you are using KwikByte's KB920x board.
+ <http://www.kwikbyte.com/KB9202.html>
+
+config MACH_PICOTUX2XX
+ bool "picotux 200"
+ help
+ Select this if you are using a picotux 200.
+ <http://www.picotux.com/>
+
+config MACH_KAFA
+ bool "Sperry-Sun KAFA board"
+ help
+ Select this if you are using Sperry-Sun's KAFA board.
+
+config MACH_ECBAT91
+ bool "emQbit ECB_AT91 SBC"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using emQbit's ECB_AT91 board.
+ <http://wiki.emqbit.com/free-ecb-at91>
+
+config MACH_YL9200
+ bool "ucDragon YL-9200"
+ help
+ Select this if you are using the ucDragon YL-9200 board.
+
+config MACH_CPUAT91
+ bool "Eukrea CPUAT91"
+ help
+ Select this if you are using the Eukrea Electromatique's
+ CPUAT91 board <http://www.eukrea.com/>.
+
+config MACH_ECO920
+ bool "eco920"
+ help
+ Select this if you are using the eco920 board
+
+config MACH_RSI_EWS
+ bool "RSI Embedded Webserver"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using RSIs EWS board.
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Variants"
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+config MACH_CAM60
+ bool "KwikByte KB9260 (CAM60) board"
+ help
+ Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+ <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+ bool "Olimex SAM9-L9260 board"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+ <http://www.olimex.com/dev/sam9-L9260.html>
+
+config MACH_AFEB9260
+ bool "Custom afeb9260 board v1"
+ help
+ Select this if you are using custom afeb9260 board based on
+ open hardware design. Select this for revision 1 of the board.
+ <svn://194.85.238.22/home/users/george/svn/arm9eb>
+ <http://groups.google.com/group/arm9fpga-evolution-board>
+
+config MACH_USB_A9260
+ bool "CALAO USB-A9260"
+ help
+ Select this if you are using a Calao Systems USB-A9260.
+ <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+ bool "CALAO QIL-A9260 board"
+ help
+ Select this if you are using a Calao Systems QIL-A9260 Board.
+ <http://www.calao-systems.com>
+
+config MACH_CPU9260
+ bool "Eukrea CPU9260 board"
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9260 Board <http://www.eukrea.com/>
+
+config MACH_FLEXIBITY
+ bool "Flexibity Connect board"
+ help
+ Select this if you are using Flexibity Connect board
+ <http://www.flexibity.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+ bool "CALAO USB-A9263"
+ help
+ Select this if you are using a Calao Systems USB-A9263.
+ <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+ bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+ help
+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+ depends on MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+ onwards.
+ <http://www.atmel.com/tools/SAM9G20-EK.aspx>
+
+config MACH_CPU9G20
+ bool "Eukrea CPU9G20 board"
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9G20 Board <http://www.eukrea.com/>
+
+config MACH_ACMENETUSFOXG20
+ bool "Acme Systems srl FOX Board G20"
+ help
+ Select this if you are using Acme Systems
+ FOX Board G20 <http://www.acmesystems.it>
+
+config MACH_PORTUXG20
+ bool "taskit PortuxG20"
+ help
+ Select this if you are using taskit's PortuxG20.
+ <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+ bool "taskit Stamp9G20 CPU module"
+ help
+ Select this if you are using taskit's Stamp9G20 CPU module on its
+ evaluation board.
+ <http://www.taskit.de/en/>
+
+config MACH_PCONTROL_G20
+ bool "PControl G20 CPU module"
+ help
+ Select this if you are using taskit's Stamp9G20 CPU module on this
+ carrier board, beeing the decentralized unit of a building automation
+ system; featuring nvram, eth-switch, iso-rs485, display, io
+
+config MACH_GSIA18S
+ bool "GS_IA18_S board"
+ help
+ This enables support for the GS_IA18_S board
+ produced by GeoSIG Ltd company. This is an internet accelerograph.
+ <http://www.geosig.com>
+
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
+endif
+
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+ bool "Bluewater Systems Snapper 9260/9G20 module"
+ help
+ Select this if you are using the Bluewater Systems Snapper 9260 or
+ Snapper 9G20 modules.
+ <http://www.bluewatersys.com/>
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9M10G45EK
+ bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
+ help
+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+ Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+ families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+ <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91X40
+
+comment "AT91X40 Board Type"
+
+config MACH_AT91EB01
+ bool "Atmel AT91EB01 Evaluation Kit"
+ help
+ Select this if you are using Atmel's AT91EB01 Evaluation Kit.
+ It is also a popular target for simulators such as GDB's
+ ARM simulator (commonly known as the ARMulator) and the
+ Skyeye simulator.
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+ depends on HAVE_AT91_DATAFLASH_CARD
+ help
+ Enable support for the DataFlash card.
+
+endmenu
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91SAM board with device-tree
-obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
-obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
+obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
__raw_readl(at91_rstc_base + field)
#define at91_rstc_write(field, value) \
- __raw_writel(value, at91_rstc_base + field);
+ __raw_writel(value, at91_rstc_base + field)
#else
.extern at91_rstc_base
#endif
__raw_readl(at91_shdwc_base + field)
#define at91_shdwc_write(field, value) \
- __raw_writel(value, at91_shdwc_base + field);
+ __raw_writel(value, at91_shdwc_base + field)
#endif
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
__raw_readl(AT91_IO_P2V(AT91_TC) + field)
#define at91_tc_write(field, value) \
- __raw_writel(value, AT91_IO_P2V(AT91_TC) + field);
+ __raw_writel(value, AT91_IO_P2V(AT91_TC) + field)
/*
* 3 counter/timer units present.
--- /dev/null
+/*
+ * Setup code for AT91RM9200 Evaluation Kits with Device Tree support
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ * 2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "at91_aic.h"
+#include "generic.h"
+
+
+static const struct of_device_id irq_of_match[] __initconst = {
+ { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
+ { /*sentinel*/ }
+};
+
+static void __init at91rm9200_dt_init_irq(void)
+{
+ of_irq_init(irq_of_match);
+}
+
+static void __init at91rm9200_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *at91rm9200_dt_board_compat[] __initdata = {
+ "atmel,at91rm9200",
+ NULL
+};
+
+DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
+ .init_time = at91rm9200_timer_init,
+ .map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
+ .init_early = at91rm9200_dt_initialize,
+ .init_irq = at91rm9200_dt_init_irq,
+ .init_machine = at91rm9200_dt_device_init,
+ .dt_compat = at91rm9200_dt_board_compat,
+MACHINE_END
--- /dev/null
+/*
+ * Setup code for AT91SAM Evaluation Kits with Device Tree support
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "at91_aic.h"
+#include "board.h"
+#include "generic.h"
+
+
+static const struct of_device_id irq_of_match[] __initconst = {
+
+ { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
+ { /*sentinel*/ }
+};
+
+static void __init at91_dt_init_irq(void)
+{
+ of_irq_init(irq_of_match);
+}
+
+static void __init at91_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *at91_dt_board_compat[] __initdata = {
+ "atmel,at91sam9",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
+ /* Maintainer: Atmel */
+ .init_time = at91sam926x_pit_init,
+ .map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
+ .init_early = at91_dt_initialize,
+ .init_irq = at91_dt_init_irq,
+ .init_machine = at91_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END
+++ /dev/null
-/*
- * Setup code for AT91SAM Evaluation Kits with Device Tree support
- *
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-
-
-static const struct of_device_id irq_of_match[] __initconst = {
-
- { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
- { /*sentinel*/ }
-};
-
-static void __init at91_dt_init_irq(void)
-{
- of_irq_init(irq_of_match);
-}
-
-static void __init at91_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *at91_dt_board_compat[] __initdata = {
- "atmel,at91sam9",
- NULL
-};
-
-DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
- /* Maintainer: Atmel */
- .init_time = at91sam926x_pit_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = at91_dt_initialize,
- .init_irq = at91_dt_init_irq,
- .init_machine = at91_dt_device_init,
- .dt_compat = at91_dt_board_compat,
-MACHINE_END
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
+++ /dev/null
-/*
- * Setup code for AT91RM9200 Evaluation Kits with Device Tree support
- *
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- * 2012 Joachim Eastwood <manabian@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "at91_aic.h"
-#include "generic.h"
-
-
-static const struct of_device_id irq_of_match[] __initconst = {
- { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
- { /*sentinel*/ }
-};
-
-static void __init at91rm9200_dt_init_irq(void)
-{
- of_irq_init(irq_of_match);
-}
-
-static void __init at91rm9200_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *at91rm9200_dt_board_compat[] __initdata = {
- "atmel,at91rm9200",
- NULL
-};
-
-DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = at91rm9200_dt_initialize,
- .init_irq = at91rm9200_dt_init_irq,
- .init_machine = at91rm9200_dt_device_init,
- .dt_compat = at91rm9200_dt_board_compat,
-MACHINE_END
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
#include <linux/module.h>
#include <linux/io.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/of_address.h>
-#include <asm/mach/irq.h>
-
#include <mach/hardware.h>
#include <mach/at91_pio.h>
#ifndef AT91_DBGU_H
#define AT91_DBGU_H
-#define dbgu_readl(dbgu, field) \
- __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
-
#if !defined(CONFIG_ARCH_AT91X40)
#define AT91_DBGU_CR (0x00) /* Control Register */
#define AT91_DBGU_MR (0x04) /* Mode Register */
__raw_readl(at91_matrix_base + field)
#define at91_matrix_write(field, value) \
- __raw_writel(value, at91_matrix_base + field);
+ __raw_writel(value, at91_matrix_base + field)
#else
.extern at91_matrix_base
__raw_readl(at91_st_base + field)
#define at91_st_write(field, value) \
- __raw_writel(value, at91_st_base + field);
+ __raw_writel(value, at91_st_base + field)
#else
.extern at91_st_base
#endif
extern void at91_gpio_suspend(void);
extern void at91_gpio_resume(void);
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
#endif /* __ASSEMBLY__ */
#endif
void at91_irq_suspend(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable enabled irqs */
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable wakeup irqs */
- i = 0;
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *backups);
void at91_irq_resume(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable wakeup irqs */
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable irqs disabled for suspend */
- i = 0;
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *wakeups);
static int at91_pm_enter(suspend_state_t state)
{
- at91_gpio_suspend();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_suspend();
+ else
+ at91_gpio_suspend();
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
error:
target_state = PM_SUSPEND_ON;
at91_irq_resume();
- at91_gpio_resume();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_resume();
+ else
+ at91_gpio_resume();
return 0;
}
of_id = of_match_node(rstc_ids, np);
if (!of_id)
- panic("AT91: rtsc no restart function availlable\n");
+ panic("AT91: rtsc no restart function available\n");
arm_pm_restart = of_id->data;
np = of_find_matching_node(NULL, ramc_ids);
if (!np)
- panic("unable to find compatible ram conroller node in dtb\n");
+ panic("unable to find compatible ram controller node in dtb\n");
at91_ramc_base[0] = of_iomap(np, 0);
if (!at91_ramc_base[0])
np = of_find_matching_node(NULL, shdwc_ids);
if (!np) {
- pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n");
+ pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n");
return;
}
if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) {
if (reg > AT91_SHDW_CPTWK0_MAX) {
- pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n",
+ pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n",
reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
reg = AT91_SHDW_CPTWK0_MAX;
}
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);
help
Compile in platform device definitions for AHCI
-config EXYNOS_DEV_DRM
- bool
- help
- Compile in platform device definitions for core DRM device
-
config EXYNOS4_SETUP_FIMD0
bool
help
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
- select HAVE_SCHED_CLOCK
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC2
depends on ARCH_EXYNOS4
select ARM_AMBA
select CPU_EXYNOS4210
- select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+ select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS
select USE_OF
#include <linux/of_irq.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/irqchip/chained_irq.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/usb-exynos.h>
+#include <linux/platform_data/usb-ohci-exynos.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-exynos.h>
+#include <linux/platform_data/usb-ohci-exynos.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-exynos.h>
+#include <linux/platform_data/usb-ohci-exynos.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
static void __cpuinit exynos_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
select ISA
select ISA_DMA
select PCI
+ select VIRT_TO_BUS
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/cache-l2x0.h>
sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
sp804_clockevents_init(timer_base, irq, "timer0");
- twd_local_timer_of_register();
-
arch_timer_of_register();
arch_timer_sched_clock_init();
+
+ clocksource_of_init();
}
static void highbank_power_off(void)
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/smp_scu.h>
extern void secondary_startup(void);
-static void __cpuinit highbank_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
highbank_set_cpu_jump(cpu, secondary_startup);
struct smp_operations highbank_smp_ops __initdata = {
.smp_init_cpus = highbank_smp_init_cpus,
.smp_prepare_cpus = highbank_smp_prepare_cpus,
- .smp_secondary_init = highbank_secondary_init,
.smp_boot_secondary = highbank_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = highbank_cpu_die,
config ARCH_MX1
bool
-config MACH_MX21
- bool
-
config ARCH_MX25
bool
config MACH_MX27
bool
-config ARCH_MX5
- bool
-
-config ARCH_MX51
- bool
-
-config ARCH_MX53
- bool
-
config SOC_IMX1
bool
select ARCH_MX1
select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
- select MACH_MX21
select MXC_AVIC
config SOC_IMX25
config SOC_IMX5
bool
select ARCH_HAS_CPUFREQ
- select ARCH_MX5
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_V7
config SOC_IMX51
bool
- select ARCH_MX5
- select ARCH_MX51
select PINCTRL
select PINCTRL_IMX51
select SOC_IMX5
config SOC_IMX53
bool "i.MX53 support"
- select ARCH_MX5
- select ARCH_MX53
select HAVE_CAN_FLEXCAN if CAN
select IMX_HAVE_PLATFORM_IMX2_WDT
select PINCTRL
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-y += cpuidle.o
+++ /dev/null
-zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000
-params_phys-$(CONFIG_SOC_IMX1) := 0x08000100
-initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000
-
-zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000
-params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100
-initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000
-
-zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000
-params_phys-$(CONFIG_SOC_IMX25) := 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000
-params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100
-initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000
-
-zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000
-params_phys-$(CONFIG_SOC_IMX31) := 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000
-params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000
-params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
-initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
-
-zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000
-params_phys-$(CONFIG_SOC_IMX53) := 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
-
-zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
-params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
-initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
void __iomem *avic_base;
static struct irq_domain *domain;
-static u32 avic_saved_mask_reg[2];
-
#ifdef CONFIG_MXC_IRQ_PRIOR
static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
{
};
#ifdef CONFIG_PM
+static u32 avic_saved_mask_reg[2];
+
static void avic_irq_suspend(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
busy->mux.reg = reg;
busy->mux.shift = shift;
- busy->mux.width = width;
+ busy->mux.mask = BIT(width) - 1;
busy->mux.lock = &imx_ccm_lock;
busy->mux_ops = &clk_mux_ops;
clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], "cpu", NULL);
clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
- clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, rom,
+ mmdc_ch0_axi, rom, pll1_sys,
};
static struct clk_div_table clk_enet_ref_table[] = {
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern void v7_cpu_resume(void);
-extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
extern void v7_secondary_startup(void);
extern void imx_scu_map_io(void);
static inline void imx_smp_prepare(void) {}
static inline void imx_scu_standby_enable(void) {}
#endif
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern void imx_src_init(void);
extern void imx_src_prepare_restart(void);
extern void imx_gpc_init(void);
+++ /dev/null
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/bug.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include "hardware.h"
-
-static struct cpu_op mx51_cpu_op[] = {
- {
- .cpu_rate = 160000000,},
- {
- .cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
- *op = ARRAY_SIZE(mx51_cpu_op);
- return mx51_cpu_op;
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);
+++ /dev/null
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
- * the CPU clock speed on the fly.
- */
-
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include "hardware.h"
-
-#define CLK32_FREQ 32768
-#define NANOSECOND (1000 * 1000 * 1000)
-
-struct cpu_op *(*get_cpu_op)(int *op);
-
-static int cpu_freq_khz_min;
-static int cpu_freq_khz_max;
-
-static struct clk *cpu_clk;
-static struct cpufreq_frequency_table *imx_freq_table;
-
-static int cpu_op_nr;
-static struct cpu_op *cpu_op_tbl;
-
-static int set_cpu_freq(int freq)
-{
- int ret = 0;
- int org_cpu_rate;
-
- org_cpu_rate = clk_get_rate(cpu_clk);
- if (org_cpu_rate == freq)
- return ret;
-
- ret = clk_set_rate(cpu_clk, freq);
- if (ret != 0) {
- printk(KERN_DEBUG "cannot set CPU clock rate\n");
- return ret;
- }
-
- return ret;
-}
-
-static int mxc_verify_speed(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- return cpufreq_frequency_table_verify(policy, imx_freq_table);
-}
-
-static unsigned int mxc_get_speed(unsigned int cpu)
-{
- if (cpu)
- return 0;
-
- return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int mxc_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq, unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- int freq_Hz;
- int ret = 0;
- unsigned int index;
-
- cpufreq_frequency_table_target(policy, imx_freq_table,
- target_freq, relation, &index);
- freq_Hz = imx_freq_table[index].frequency * 1000;
-
- freqs.old = clk_get_rate(cpu_clk) / 1000;
- freqs.new = freq_Hz / 1000;
- freqs.cpu = 0;
- freqs.flags = 0;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- ret = set_cpu_freq(freq_Hz);
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
-}
-
-static int mxc_cpufreq_init(struct cpufreq_policy *policy)
-{
- int ret;
- int i;
-
- printk(KERN_INFO "i.MXC CPU frequency driver\n");
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- if (!get_cpu_op)
- return -EINVAL;
-
- cpu_clk = clk_get(NULL, "cpu_clk");
- if (IS_ERR(cpu_clk)) {
- printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
- return PTR_ERR(cpu_clk);
- }
-
- cpu_op_tbl = get_cpu_op(&cpu_op_nr);
-
- cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
- cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
-
- imx_freq_table = kmalloc(
- sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
- GFP_KERNEL);
- if (!imx_freq_table) {
- ret = -ENOMEM;
- goto err1;
- }
-
- for (i = 0; i < cpu_op_nr; i++) {
- imx_freq_table[i].index = i;
- imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
-
- if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
- cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
-
- if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
- cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
- }
-
- imx_freq_table[i].index = i;
- imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- policy->cur = clk_get_rate(cpu_clk) / 1000;
- policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
- policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
-
- /* Manual states, that PLL stabilizes in two CLK32 periods */
- policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
-
- ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
- if (ret < 0) {
- printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
- __func__, ret);
- goto err;
- }
-
- cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
- return 0;
-err:
- kfree(imx_freq_table);
-err1:
- clk_put(cpu_clk);
- return ret;
-}
-
-static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
-{
- cpufreq_frequency_table_put_attr(policy->cpu);
-
- set_cpu_freq(cpu_freq_khz_max * 1000);
- clk_put(cpu_clk);
- kfree(imx_freq_table);
- return 0;
-}
-
-static struct cpufreq_driver mxc_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = mxc_verify_speed,
- .target = mxc_set_target,
- .get = mxc_get_speed,
- .init = mxc_cpufreq_init,
- .exit = mxc_cpufreq_exit,
- .name = "imx",
-};
-
-static int mxc_cpufreq_driver_init(void)
-{
- return cpufreq_register_driver(&mxc_driver);
-}
-
-static void mxc_cpufreq_driver_exit(void)
-{
- cpufreq_unregister_driver(&mxc_driver);
-}
-
-module_init(mxc_cpufreq_driver_init);
-module_exit(mxc_cpufreq_driver_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
-MODULE_DESCRIPTION("CPUfreq driver for i.MX");
-MODULE_LICENSE("GPL");
config IMX_HAVE_PLATFORM_SPI_IMX
bool
-
-config IMX_HAVE_PLATFORM_AHCI
- bool
- default y if ARCH_MX53
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o
int irq, int irq_err);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
-
-#include <linux/ahci_platform.h>
-struct imx_ahci_imx_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_ahci_imx(
- const struct imx_ahci_imx_data *data,
- const struct ahci_platform_data *pdata);
+++ /dev/null
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_ahci_imx_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _SATA_BASE_ADDR, \
- .irq = soc ## _INT_SATA, \
- }
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
- imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
-#endif
-
-enum {
- HOST_CAP = 0x00,
- HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
- HOST_PORTS_IMPL = 0x0c,
- HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
-};
-
-static struct clk *sata_clk, *sata_ref_clk;
-
-/* AHCI module Initialization, if return 0, initialization is successful. */
-static int imx_sata_init(struct device *dev, void __iomem *addr)
-{
- u32 tmpdata;
- int ret = 0;
- struct clk *clk;
-
- sata_clk = clk_get(dev, "ahci");
- if (IS_ERR(sata_clk)) {
- dev_err(dev, "no sata clock.\n");
- return PTR_ERR(sata_clk);
- }
- ret = clk_prepare_enable(sata_clk);
- if (ret) {
- dev_err(dev, "can't prepare/enable sata clock.\n");
- goto put_sata_clk;
- }
-
- /* Get the AHCI SATA PHY CLK */
- sata_ref_clk = clk_get(dev, "ahci_phy");
- if (IS_ERR(sata_ref_clk)) {
- dev_err(dev, "no sata ref clock.\n");
- ret = PTR_ERR(sata_ref_clk);
- goto release_sata_clk;
- }
- ret = clk_prepare_enable(sata_ref_clk);
- if (ret) {
- dev_err(dev, "can't prepare/enable sata ref clock.\n");
- goto put_sata_ref_clk;
- }
-
- /* Get the AHB clock rate, and configure the TIMER1MS reg later */
- clk = clk_get(dev, "ahci_dma");
- if (IS_ERR(clk)) {
- dev_err(dev, "no dma clock.\n");
- ret = PTR_ERR(clk);
- goto release_sata_ref_clk;
- }
- tmpdata = clk_get_rate(clk) / 1000;
- clk_put(clk);
-
- writel(tmpdata, addr + HOST_TIMER1MS);
-
- tmpdata = readl(addr + HOST_CAP);
- if (!(tmpdata & HOST_CAP_SSS)) {
- tmpdata |= HOST_CAP_SSS;
- writel(tmpdata, addr + HOST_CAP);
- }
-
- if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
- writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
- addr + HOST_PORTS_IMPL);
-
- return 0;
-
-release_sata_ref_clk:
- clk_disable_unprepare(sata_ref_clk);
-put_sata_ref_clk:
- clk_put(sata_ref_clk);
-release_sata_clk:
- clk_disable_unprepare(sata_clk);
-put_sata_clk:
- clk_put(sata_clk);
-
- return ret;
-}
-
-static void imx_sata_exit(struct device *dev)
-{
- clk_disable_unprepare(sata_ref_clk);
- clk_put(sata_ref_clk);
-
- clk_disable_unprepare(sata_clk);
- clk_put(sata_clk);
-
-}
-struct platform_device *__init imx_add_ahci_imx(
- const struct imx_ahci_imx_data *data,
- const struct ahci_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-
-struct platform_device *__init imx53_add_ahci_imx(void)
-{
- struct ahci_platform_data pdata = {
- .init = imx_sata_init,
- .exit = imx_sata_exit,
- };
-
- return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
-}
#include "mxc.h"
-#include "mx6q.h"
#include "mx51.h"
#include "mx53.h"
#include "mx3x.h"
#ifdef CONFIG_PM
/*
- * The following code is located into the .data section. This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
*/
- .data
- .align
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
- ldr r2, phys_l2x0_saved_regs
+ adr r0, l2x0_saved_regs_offset
+ ldr r2, [r0]
+ add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
- .globl phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
- .long 0
+l2x0_saved_regs_offset:
+ .word l2x0_saved_regs - .
+
#else
.macro pl310_resume
.endm
NULL
};
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
#include "common.h"
#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx51.h"
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
-
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
imx51_add_imx2_wdt(0);
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/clocksource.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
-#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
#include <asm/system_misc.h>
#include "common.h"
static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
- twd_local_timer_of_register();
+ clocksource_of_init();
imx_print_silicon_rev("i.MX6Q", imx6q_revision());
}
#include "common.h"
#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
#include "hardware.h"
#include "iomux-mx51.h"
imx51_soc_init();
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
imx51_babbage_common_init();
imx51_add_imx_uart(0, &uart_pdata);
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_MX6Q_H__
-#define __MACH_MX6Q_H__
-
-#define MX6Q_IO_P2V(x) IMX_IO_P2V(x)
-#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x))
-
-/*
- * The following are the blocks that need to be statically mapped.
- * For other blocks, the base address really should be retrieved from
- * device tree.
- */
-#define MX6Q_SCU_BASE_ADDR 0x00a00000
-#define MX6Q_SCU_SIZE 0x1000
-#define MX6Q_CCM_BASE_ADDR 0x020c4000
-#define MX6Q_CCM_SIZE 0x4000
-#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
-#define MX6Q_ANATOP_SIZE 0x1000
-
-#endif /* __MACH_MX6Q_H__ */
#include <linux/init.h>
#include <linux/smp.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
#include <asm/mach/map.h>
writel_relaxed(val, scu_base);
}
-static void __cpuinit imx_secondary_init(unsigned int cpu)
-{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-}
-
static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
imx_set_cpu_jump(cpu, v7_secondary_startup);
struct smp_operations imx_smp_ops __initdata = {
.smp_init_cpus = imx_smp_init_cpus,
.smp_prepare_cpus = imx_smp_prepare_cpus,
- .smp_secondary_init = imx_secondary_init,
.smp_boot_secondary = imx_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = imx_cpu_die,
#include "common.h"
#include "hardware.h"
-extern unsigned long phys_l2x0_saved_regs;
-
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
void __init imx6q_pm_init(void)
{
- /*
- * The l2x0 core code provides an infrastucture to save and restore
- * l2x0 registers across suspend/resume cycle. But because imx6q
- * retains L2 content during suspend and needs to resume L2 before
- * MMU is enabled, it can only utilize register saving support and
- * have to take care of restoring on its own. So we save physical
- * address of the data structure used by l2x0 core to save registers,
- * and later restore the necessary ones in imx6q resume entry.
- */
-#ifdef CONFIG_CACHE_L2X0
- phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
-#endif
-
suspend_set_ops(&imx6q_pm_ops);
}
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device vulcan_w1_gpio = {
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
-
struct of_phandle_args clkspec;
+ struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
- clkspec.args[0] = CGC_BIT_GE0;
- orion_clkdev_add(NULL, "mv643xx_eth_port.0",
- of_clk_get_from_provider(&clkspec));
-
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
- clkspec.args[0] = CGC_BIT_GE1;
- orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+ clkspec.args[0] = CGC_BIT_SDIO;
+ orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by
+ * u-boot if the clocks are turned off. Until proper DT support
+ * is available we always enable them for now.
+ */
+ clkspec.args[0] = CGC_BIT_GE0;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+ clk_prepare_enable(clk);
+
+ clkspec.args[0] = CGC_BIT_GE1;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+ clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
};
static struct platform_device *devices[] __initdata = {
+ &msm_device_gpio_7201,
&msm_device_uart3,
&msm_device_smd,
&msm_device_nand,
};
static struct platform_device *devices[] __initdata = {
+ &msm_device_gpio_7x30,
#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
&msm_device_uart2,
#endif
};
static struct platform_device *devices[] __initdata = {
+ &msm_device_gpio_8x50,
&msm_device_uart3,
&msm_device_smd,
&msm_device_otg,
extern int trout_init_mmc(unsigned int);
static struct platform_device *devices[] __initdata = {
+ &msm_device_gpio_7201,
&msm_device_uart3,
&msm_device_smd,
&msm_device_nand,
#include "clock-pcom.h"
#include <linux/platform_data/mmc-msm_sdcc.h>
+static struct resource msm_gpio_resources[] = {
+ {
+ .start = 32 + 0,
+ .end = 32 + 0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 32 + 1,
+ .end = 32 + 1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 0xa9200800,
+ .end = 0xa9200800 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "gpio1"
+ },
+ {
+ .start = 0xa9300C00,
+ .end = 0xa9300C00 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "gpio2"
+ },
+};
+
+struct platform_device msm_device_gpio_7201 = {
+ .name = "gpio-msm-7201",
+ .num_resources = ARRAY_SIZE(msm_gpio_resources),
+ .resource = msm_gpio_resources,
+};
+
static struct resource resources_uart1[] = {
{
.start = INT_UART1,
#include <linux/platform_data/mmc-msm_sdcc.h>
+static struct resource msm_gpio_resources[] = {
+ {
+ .start = 32 + 18,
+ .end = 32 + 18,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 32 + 19,
+ .end = 32 + 19,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 0xac001000,
+ .end = 0xac001000 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "gpio1"
+ },
+ {
+ .start = 0xac101400,
+ .end = 0xac101400 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "gpio2"
+ },
+};
+
+struct platform_device msm_device_gpio_7x30 = {
+ .name = "gpio-msm-7x30",
+ .num_resources = ARRAY_SIZE(msm_gpio_resources),
+ .resource = msm_gpio_resources,
+};
+
static struct resource resources_uart2[] = {
{
.start = INT_UART2,
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "clock-pcom.h"
+static struct resource msm_gpio_resources[] = {
+ {
+ .start = 64 + 165 + 9,
+ .end = 64 + 165 + 9,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 64 + 165 + 10,
+ .end = 64 + 165 + 10,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 0xa9000800,
+ .end = 0xa9000800 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "gpio1"
+ },
+ {
+ .start = 0xa9100C00,
+ .end = 0xa9100C00 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "gpio2"
+ },
+};
+
+struct platform_device msm_device_gpio_8x50 = {
+ .name = "gpio-msm-8x50",
+ .num_resources = ARRAY_SIZE(msm_gpio_resources),
+ .resource = msm_gpio_resources,
+};
+
static struct resource resources_uart3[] = {
{
.start = INT_UART3,
#include "clock.h"
+extern struct platform_device msm_device_gpio_7201;
+extern struct platform_device msm_device_gpio_7x30;
+extern struct platform_device msm_device_gpio_8x50;
+
extern struct platform_device msm_device_uart1;
extern struct platform_device msm_device_uart2;
extern struct platform_device msm_device_uart3;
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <mach/dma.h>
+#include <mach/msm_iomap.h>
#define MSM_DMOV_CHANNEL_COUNT 16
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define DMOV_SD_AARM DMOV_SD2
+#else
+#define DMOV_SD_AARM DMOV_SD3
+#endif
+
+#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch)
+#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch)
+#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch)
+#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch)
+#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch)
+#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch)
+#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch)
+#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch)
+
+#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch)
+#define DMOV_ISR DMOV_SD_AARM(0x380, 0)
+
+#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch)
+
enum {
MSM_DMOV_PRINT_ERRORS = 1,
MSM_DMOV_PRINT_IO = 2,
+++ /dev/null
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CPU_H__
-#define __ARCH_ARM_MACH_MSM_CPU_H__
-
-/* TODO: For now, only one CPU can be compiled at a time. */
-
-#define cpu_is_msm7x01() 0
-#define cpu_is_msm7x30() 0
-#define cpu_is_qsd8x50() 0
-#define cpu_is_msm8x60() 0
-#define cpu_is_msm8960() 0
-
-#ifdef CONFIG_ARCH_MSM7X00A
-# undef cpu_is_msm7x01
-# define cpu_is_msm7x01() 1
-#endif
-
-#ifdef CONFIG_ARCH_MSM7X30
-# undef cpu_is_msm7x30
-# define cpu_is_msm7x30() 1
-#endif
-
-#ifdef CONFIG_ARCH_QSD8X50
-# undef cpu_is_qsd8x50
-# define cpu_is_qsd8x50() 1
-#endif
-
-#ifdef CONFIG_ARCH_MSM8X60
-# undef cpu_is_msm8x60
-# define cpu_is_msm8x60() 1
-#endif
-
-#ifdef CONFIG_ARCH_MSM8960
-# undef cpu_is_msm8960
-# define cpu_is_msm8960() 1
-#endif
-
-#endif
#ifndef __ASM_ARCH_MSM_DMA_H
#include <linux/list.h>
-#include <mach/msm_iomap.h>
struct msm_dmov_errdata {
uint32_t flush[6];
int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
#endif
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define DMOV_SD_AARM DMOV_SD2
-#else
-#define DMOV_SD_AARM DMOV_SD3
-#endif
-
-#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch)
#define DMOV_CMD_LIST (0 << 29) /* does not work */
#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
-#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch)
#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
#define DMOV_RSLT_ERROR (1 << 3)
#define DMOV_RSLT_FLUSH (1 << 2)
#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
-#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch)
-#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch)
-#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch)
-#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch)
-#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch)
-#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch)
-
-#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch)
#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
#define DMOV_STATUS_RSLT_VALID (1 << 1)
#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
-#define DMOV_ISR DMOV_SD_AARM(0x380, 0)
-
-#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch)
#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
#define DMOV_CONFIG_IRQ_EN (1 << 0)
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
static void __cpuinit msm_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
-# Common support
-obj-y := icoll.o ocotp.o system.o timer.o mm.o
-
obj-$(CONFIG_PM) += pm.o
-
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <asm/exception.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define HW_ICOLL_VECTOR 0x0000
-#define HW_ICOLL_LEVELACK 0x0010
-#define HW_ICOLL_CTRL 0x0020
-#define HW_ICOLL_STAT_OFFSET 0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
-#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1
-
-#define ICOLL_NUM_IRQS 128
-
-static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
-static struct irq_domain *icoll_domain;
-
-static void icoll_ack_irq(struct irq_data *d)
-{
- /*
- * The Interrupt Collector is able to prioritize irqs.
- * Currently only level 0 is used. So acking can use
- * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
- */
- __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
- icoll_base + HW_ICOLL_LEVELACK);
-}
-
-static void icoll_mask_irq(struct irq_data *d)
-{
- __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
-}
-
-static void icoll_unmask_irq(struct irq_data *d)
-{
- __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
-}
-
-static struct irq_chip mxs_icoll_chip = {
- .irq_ack = icoll_ack_irq,
- .irq_mask = icoll_mask_irq,
- .irq_unmask = icoll_unmask_irq,
-};
-
-asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
-{
- u32 irqnr;
-
- do {
- irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
- if (irqnr != 0x7f) {
- __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
- irqnr = irq_find_mapping(icoll_domain, irqnr);
- handle_IRQ(irqnr, regs);
- continue;
- }
- break;
- } while (1);
-}
-
-static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
-{
- irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
- set_irq_flags(virq, IRQF_VALID);
-
- return 0;
-}
-
-static struct irq_domain_ops icoll_irq_domain_ops = {
- .map = icoll_irq_domain_map,
- .xlate = irq_domain_xlate_onecell,
-};
-
-void __init icoll_of_init(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- /*
- * Interrupt Collector reset, which initializes the priority
- * for each irq to level 0.
- */
- mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
-
- icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
- &icoll_irq_domain_ops, NULL);
- WARN_ON(!icoll_domain);
-}
-
-static const struct of_device_id icoll_of_match[] __initconst = {
- {.compatible = "fsl,icoll", .data = icoll_of_init},
- { /* sentinel */ }
-};
-
-void __init icoll_init_irq(void)
-{
- of_irq_init(icoll_of_match);
-}
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_COMMON_H__
-#define __MACH_MXS_COMMON_H__
-
-extern const u32 *mxs_get_ocotp(void);
-extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(void);
-extern void mxs_restart(char, const char *);
-extern int mxs_saif_clkmux_select(unsigned int clkmux);
-
-extern int mx23_clocks_init(void);
-extern void mx23_map_io(void);
-
-extern int mx28_clocks_init(void);
-extern void mx28_map_io(void);
-
-extern void icoll_init_irq(void);
-extern void icoll_handle_irq(struct pt_regs *);
-
-#endif /* __MACH_MXS_COMMON_H__ */
*
*/
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-
#ifdef CONFIG_DEBUG_IMX23_UART
-#define UART_PADDR MX23_DUART_BASE_ADDR
+#define UART_PADDR 0x80070000
#elif defined (CONFIG_DEBUG_IMX28_UART)
-#define UART_PADDR MX28_DUART_BASE_ADDR
+#define UART_PADDR 0x80074000
#endif
-#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
+#define UART_VADDR 0xfe100000
.macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_DIGCTL_H__
-#define __MACH_DIGCTL_H__
-
-/* MXS DIGCTL SAIF CLKMUX */
-#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
-#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
-
-#define HW_DIGCTL_CTRL 0x0
-#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10
-#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10)
-#define HW_DIGCTL_CHIPID 0x310
-#endif
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_HARDWARE_H__
-#define __MACH_MXS_HARDWARE_H__
-
-#endif /* __MACH_MXS_HARDWARE_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX23_H__
-#define __MACH_MX23_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX23_OCRAM_BASE_ADDR 0x00000000
-#define MX23_OCRAM_SIZE SZ_32K
-
-/*
- * IO
- */
-#define MX23_IO_BASE_ADDR 0x80000000
-#define MX23_IO_SIZE SZ_1M
-
-#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000)
-#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000)
-#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000)
-#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000)
-#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000)
-#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000)
-#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000)
-#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000)
-#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000)
-#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000)
-#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000)
-#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000)
-#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000)
-#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000)
-#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000)
-#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000)
-#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000)
-#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000)
-#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000)
-#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000)
-#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000)
-#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000)
-#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000)
-#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000)
-#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000)
-#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000)
-#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000)
-#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000)
-#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000)
-#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000)
-#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000)
-#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000)
-#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000)
-
-#define MX23_IO_P2V(x) MXS_IO_P2V(x)
-#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX23_INT_DUART 0
-#define MX23_INT_COMMS_RX 1
-#define MX23_INT_COMMS_TX 1
-#define MX23_INT_SSP2_ERROR 2
-#define MX23_INT_VDD5V 3
-#define MX23_INT_HEADPHONE_SHORT 4
-#define MX23_INT_DAC_DMA 5
-#define MX23_INT_DAC_ERROR 6
-#define MX23_INT_ADC_DMA 7
-#define MX23_INT_ADC_ERROR 8
-#define MX23_INT_SPDIF_DMA 9
-#define MX23_INT_SAIF2_DMA 9
-#define MX23_INT_SPDIF_ERROR 10
-#define MX23_INT_SAIF1_IRQ 10
-#define MX23_INT_SAIF2_IRQ 10
-#define MX23_INT_USB_CTRL 11
-#define MX23_INT_USB_WAKEUP 12
-#define MX23_INT_GPMI_DMA 13
-#define MX23_INT_SSP1_DMA 14
-#define MX23_INT_SSP1_ERROR 15
-#define MX23_INT_GPIO0 16
-#define MX23_INT_GPIO1 17
-#define MX23_INT_GPIO2 18
-#define MX23_INT_SAIF1_DMA 19
-#define MX23_INT_SSP2_DMA 20
-#define MX23_INT_ECC8_IRQ 21
-#define MX23_INT_RTC_ALARM 22
-#define MX23_INT_AUART1_TX_DMA 23
-#define MX23_INT_AUART1 24
-#define MX23_INT_AUART1_RX_DMA 25
-#define MX23_INT_I2C_DMA 26
-#define MX23_INT_I2C_ERROR 27
-#define MX23_INT_TIMER0 28
-#define MX23_INT_TIMER1 29
-#define MX23_INT_TIMER2 30
-#define MX23_INT_TIMER3 31
-#define MX23_INT_BATT_BRNOUT 32
-#define MX23_INT_VDDD_BRNOUT 33
-#define MX23_INT_VDDIO_BRNOUT 34
-#define MX23_INT_VDD18_BRNOUT 35
-#define MX23_INT_TOUCH_DETECT 36
-#define MX23_INT_LRADC_CH0 37
-#define MX23_INT_LRADC_CH1 38
-#define MX23_INT_LRADC_CH2 39
-#define MX23_INT_LRADC_CH3 40
-#define MX23_INT_LRADC_CH4 41
-#define MX23_INT_LRADC_CH5 42
-#define MX23_INT_LRADC_CH6 43
-#define MX23_INT_LRADC_CH7 44
-#define MX23_INT_LCDIF_DMA 45
-#define MX23_INT_LCDIF_ERROR 46
-#define MX23_INT_DIGCTL_DEBUG_TRAP 47
-#define MX23_INT_RTC_1MSEC 48
-#define MX23_INT_DRI_DMA 49
-#define MX23_INT_DRI_ATTENTION 50
-#define MX23_INT_GPMI_ATTENTION 51
-#define MX23_INT_IR 52
-#define MX23_INT_DCP_VMI 53
-#define MX23_INT_DCP 54
-#define MX23_INT_BCH 56
-#define MX23_INT_PXP 57
-#define MX23_INT_AUART2_TX_DMA 58
-#define MX23_INT_AUART2 59
-#define MX23_INT_AUART2_RX_DMA 60
-#define MX23_INT_VDAC_DETECT 61
-#define MX23_INT_VDD5V_DROOP 64
-#define MX23_INT_DCDC4P2_BO 65
-
-/*
- * APBH DMA
- */
-#define MX23_DMA_SSP1 1
-#define MX23_DMA_SSP2 2
-#define MX23_DMA_GPMI0 4
-#define MX23_DMA_GPMI1 5
-#define MX23_DMA_GPMI2 6
-#define MX23_DMA_GPMI3 7
-
-/*
- * APBX DMA
- */
-#define MX23_DMA_ADC 0
-#define MX23_DMA_DAC 1
-#define MX23_DMA_SPDIF 2
-#define MX23_DMA_I2C 3
-#define MX23_DMA_SAIF0 4
-#define MX23_DMA_UART0_RX 6
-#define MX23_DMA_UART0_TX 7
-#define MX23_DMA_UART1_RX 8
-#define MX23_DMA_UART1_TX 9
-#define MX23_DMA_SAIF1 10
-
-#endif /* __MACH_MX23_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX28_H__
-#define __MACH_MX28_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX28_OCRAM_BASE_ADDR 0x00000000
-#define MX28_OCRAM_SIZE SZ_128K
-
-/*
- * IO
- */
-#define MX28_IO_BASE_ADDR 0x80000000
-#define MX28_IO_SIZE SZ_1M
-
-#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000)
-#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000)
-#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000)
-#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000)
-#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000)
-#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000)
-#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000)
-#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000)
-#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000)
-#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000)
-#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000)
-#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000)
-#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000)
-#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000)
-#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000)
-#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000)
-#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000)
-#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000)
-#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000)
-#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000)
-#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000)
-#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000)
-#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200)
-#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300)
-#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400)
-#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500)
-#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700)
-#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800)
-#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000)
-#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000)
-#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000)
-#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000)
-#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000)
-#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000)
-#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000)
-#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000)
-#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000)
-#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000)
-#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000)
-#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000)
-#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000)
-#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000)
-#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000)
-#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000)
-#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000)
-#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000)
-#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000)
-#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000)
-#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000)
-#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000)
-#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000)
-#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000)
-#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000)
-
-#define MX28_IO_P2V(x) MXS_IO_P2V(x)
-#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX28_INT_BATT_BRNOUT 0
-#define MX28_INT_VDDD_BRNOUT 1
-#define MX28_INT_VDDIO_BRNOUT 2
-#define MX28_INT_VDDA_BRNOUT 3
-#define MX28_INT_VDD5V_DROOP 4
-#define MX28_INT_DCDC4P2_BRNOUT 5
-#define MX28_INT_VDD5V 6
-#define MX28_INT_CAN0 8
-#define MX28_INT_CAN1 9
-#define MX28_INT_LRADC_TOUCH 10
-#define MX28_INT_HSADC 13
-#define MX28_INT_LRADC_THRESH0 14
-#define MX28_INT_LRADC_THRESH1 15
-#define MX28_INT_LRADC_CH0 16
-#define MX28_INT_LRADC_CH1 17
-#define MX28_INT_LRADC_CH2 18
-#define MX28_INT_LRADC_CH3 19
-#define MX28_INT_LRADC_CH4 20
-#define MX28_INT_LRADC_CH5 21
-#define MX28_INT_LRADC_CH6 22
-#define MX28_INT_LRADC_CH7 23
-#define MX28_INT_LRADC_BUTTON0 24
-#define MX28_INT_LRADC_BUTTON1 25
-#define MX28_INT_PERFMON 27
-#define MX28_INT_RTC_1MSEC 28
-#define MX28_INT_RTC_ALARM 29
-#define MX28_INT_COMMS 31
-#define MX28_INT_EMI_ERR 32
-#define MX28_INT_LCDIF 38
-#define MX28_INT_PXP 39
-#define MX28_INT_BCH 41
-#define MX28_INT_GPMI 42
-#define MX28_INT_SPDIF_ERROR 45
-#define MX28_INT_DUART 47
-#define MX28_INT_TIMER0 48
-#define MX28_INT_TIMER1 49
-#define MX28_INT_TIMER2 50
-#define MX28_INT_TIMER3 51
-#define MX28_INT_DCP_VMI 52
-#define MX28_INT_DCP 53
-#define MX28_INT_DCP_SECURE 54
-#define MX28_INT_SAIF1 58
-#define MX28_INT_SAIF0 59
-#define MX28_INT_SPDIF_DMA 66
-#define MX28_INT_I2C0_DMA 68
-#define MX28_INT_I2C1_DMA 69
-#define MX28_INT_AUART0_RX_DMA 70
-#define MX28_INT_AUART0_TX_DMA 71
-#define MX28_INT_AUART1_RX_DMA 72
-#define MX28_INT_AUART1_TX_DMA 73
-#define MX28_INT_AUART2_RX_DMA 74
-#define MX28_INT_AUART2_TX_DMA 75
-#define MX28_INT_AUART3_RX_DMA 76
-#define MX28_INT_AUART3_TX_DMA 77
-#define MX28_INT_AUART4_RX_DMA 78
-#define MX28_INT_AUART4_TX_DMA 79
-#define MX28_INT_SAIF0_DMA 80
-#define MX28_INT_SAIF1_DMA 81
-#define MX28_INT_SSP0_DMA 82
-#define MX28_INT_SSP1_DMA 83
-#define MX28_INT_SSP2_DMA 84
-#define MX28_INT_SSP3_DMA 85
-#define MX28_INT_LCDIF_DMA 86
-#define MX28_INT_HSADC_DMA 87
-#define MX28_INT_GPMI_DMA 88
-#define MX28_INT_DIGCTL_DEBUG_TRAP 89
-#define MX28_INT_USB1 92
-#define MX28_INT_USB0 93
-#define MX28_INT_USB1_WAKEUP 94
-#define MX28_INT_USB0_WAKEUP 95
-#define MX28_INT_SSP0_ERROR 96
-#define MX28_INT_SSP1_ERROR 97
-#define MX28_INT_SSP2_ERROR 98
-#define MX28_INT_SSP3_ERROR 99
-#define MX28_INT_ENET_SWI 100
-#define MX28_INT_ENET_MAC0 101
-#define MX28_INT_ENET_MAC1 102
-#define MX28_INT_ENET_MAC0_1588 103
-#define MX28_INT_ENET_MAC1_1588 104
-#define MX28_INT_I2C1_ERROR 110
-#define MX28_INT_I2C0_ERROR 111
-#define MX28_INT_AUART0 112
-#define MX28_INT_AUART1 113
-#define MX28_INT_AUART2 114
-#define MX28_INT_AUART3 115
-#define MX28_INT_AUART4 116
-#define MX28_INT_GPIO4 123
-#define MX28_INT_GPIO3 124
-#define MX28_INT_GPIO2 125
-#define MX28_INT_GPIO1 126
-#define MX28_INT_GPIO0 127
-
-/*
- * APBH DMA
- */
-#define MX28_DMA_SSP0 0
-#define MX28_DMA_SSP1 1
-#define MX28_DMA_SSP2 2
-#define MX28_DMA_SSP3 3
-#define MX28_DMA_GPMI0 4
-#define MX28_DMA_GPMI1 5
-#define MX28_DMA_GPMI2 6
-#define MX28_DMA_GPMI3 7
-#define MX28_DMA_GPMI4 8
-#define MX28_DMA_GPMI5 9
-#define MX28_DMA_GPMI6 10
-#define MX28_DMA_GPMI7 11
-#define MX28_DMA_HSADC 12
-#define MX28_DMA_LCDIF 13
-
-/*
- * APBX DMA
- */
-#define MX28_DMA_AUART4_RX 0
-#define MX28_DMA_AUART4_TX 1
-#define MX28_DMA_SPDIF_TX 2
-#define MX28_DMA_SAIF0 4
-#define MX28_DMA_SAIF1 5
-#define MX28_DMA_I2C0 6
-#define MX28_DMA_I2C1 7
-#define MX28_DMA_AUART0_RX 8
-#define MX28_DMA_AUART0_TX 9
-#define MX28_DMA_AUART1_RX 10
-#define MX28_DMA_AUART1_TX 11
-#define MX28_DMA_AUART2_RX 12
-#define MX28_DMA_AUART2_TX 13
-#define MX28_DMA_AUART3_RX 14
-#define MX28_DMA_AUART3_TX 15
-
-#endif /* __MACH_MX28_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_H__
-#define __MACH_MXS_H__
-
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-#include <asm/mach-types.h>
-#include <mach/digctl.h>
-#include <mach/hardware.h>
-
-/*
- * IO addresses common to MXS-based
- */
-#define MXS_IO_BASE_ADDR 0x80000000
-#define MXS_IO_SIZE SZ_1M
-
-#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000)
-#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000)
-#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000)
-#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000)
-#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000)
-#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000)
-#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000)
-#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000)
-#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000)
-#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000)
-#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000)
-#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000)
-#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000)
-#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000)
-#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000)
-#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000)
-#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000)
-#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000)
-#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000)
-#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000)
-#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000)
-#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000)
-#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000)
-#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000)
-
-/*
- * It maps the whole address space to [0xf4000000, 0xf50fffff].
- *
- * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000
- * IO 0x80000000+0x100000 -> 0xf5000000+0x100000
- */
-#define MXS_IO_P2V(x) (0xf4000000 + \
- (((x) & 0x80000000) >> 7) + \
- (((x) & 0x000fffff)))
-
-#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x))
-
-#define mxs_map_entry(soc, name, _type) { \
- .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
- .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \
- .length = soc ## _ ## name ## _SIZE, \
- .type = _type, \
-}
-
-#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
-
-#define MXS_SET_ADDR 0x4
-#define MXS_CLR_ADDR 0x8
-#define MXS_TOG_ADDR 0xc
-
-#ifndef __ASSEMBLER__
-static inline void __mxs_setl(u32 mask, void __iomem *reg)
-{
- __raw_writel(mask, reg + MXS_SET_ADDR);
-}
-
-static inline void __mxs_clrl(u32 mask, void __iomem *reg)
-{
- __raw_writel(mask, reg + MXS_CLR_ADDR);
-}
-
-static inline void __mxs_togl(u32 mask, void __iomem *reg)
-{
- __raw_writel(mask, reg + MXS_TOG_ADDR);
-}
-
-/*
- * MXS CPU types
- */
-#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
-
-static inline int cpu_is_mx23(void)
-{
- return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
-}
-
-static inline int cpu_is_mx28(void)
-{
- return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
-}
-#endif
-
-#endif /* __MACH_MXS_H__ */
*/
#include <linux/clk.h>
+#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
+#include <linux/clocksource.h>
#include <linux/can/platform/flexcan.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mxs.h>
#include <linux/micrel_phy.h>
#include <linux/mxsfb.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/pinctrl/consumer.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/mxs.h>
+#include <asm/system_misc.h>
+
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
+
+#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
+
+#define MXS_SET_ADDR 0x4
+#define MXS_CLR_ADDR 0x8
+#define MXS_TOG_ADDR 0xc
+
+static inline void __mxs_setl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_SET_ADDR);
+}
+
+static inline void __mxs_clrl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_CLR_ADDR);
+}
+
+static inline void __mxs_togl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_TOG_ADDR);
+}
static struct fb_videomode mx23evk_video_modes[] = {
{
.lower_margin = 4,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
.lower_margin = 45,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
},
};
.lower_margin = 13,
.hsync_len = 48,
.vsync_len = 3,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
.lower_margin = 0x15,
.hsync_len = 64,
.vsync_len = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
.lower_margin = 2,
.hsync_len = 15,
.vsync_len = 15,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT
},
};
{ /* sentinel */ }
};
-static void __init imx23_timer_init(void)
-{
- mx23_clocks_init();
-}
+#define OCOTP_WORD_OFFSET 0x20
+#define OCOTP_WORD_COUNT 0x20
-static void __init imx28_timer_init(void)
+#define BM_OCOTP_CTRL_BUSY (1 << 8)
+#define BM_OCOTP_CTRL_ERROR (1 << 9)
+#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
+
+static DEFINE_MUTEX(ocotp_mutex);
+static u32 ocotp_words[OCOTP_WORD_COUNT];
+
+static const u32 *mxs_get_ocotp(void)
{
- mx28_clocks_init();
+ struct device_node *np;
+ void __iomem *ocotp_base;
+ int timeout = 0x400;
+ size_t i;
+ static int once;
+
+ if (once)
+ return ocotp_words;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
+ ocotp_base = of_iomap(np, 0);
+ WARN_ON(!ocotp_base);
+
+ mutex_lock(&ocotp_mutex);
+
+ /*
+ * clk_enable(hbus_clk) for ocotp can be skipped
+ * as it must be on when system is running.
+ */
+
+ /* try to clear ERROR bit */
+ __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
+
+ /* check both BUSY and ERROR cleared */
+ while ((__raw_readl(ocotp_base) &
+ (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ goto error_unlock;
+
+ /* open OCOTP banks for read */
+ __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+ /* approximately wait 32 hclk cycles */
+ udelay(1);
+
+ /* poll BUSY bit becoming cleared */
+ timeout = 0x400;
+ while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ goto error_unlock;
+
+ for (i = 0; i < OCOTP_WORD_COUNT; i++)
+ ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
+ i * 0x10);
+
+ /* close banks for power saving */
+ __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+ once = 1;
+
+ mutex_unlock(&ocotp_mutex);
+
+ return ocotp_words;
+
+error_unlock:
+ mutex_unlock(&ocotp_mutex);
+ pr_err("%s: timeout in reading OCOTP\n", __func__);
+ return NULL;
}
enum mac_oui {
mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static inline void enable_clk_enet_out(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init sc_sps1_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
+
+ mxsfb_pdata.mode_list = cfa10049_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init cfa10037_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
-
- mxsfb_pdata.mode_list = cfa10049_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
- mxsfb_pdata.default_bpp = 32;
- mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init apf28_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static void __init mxs_machine_init(void)
imx28_evk_post_init();
}
-static const char *imx23_dt_compat[] __initdata = {
- "fsl,imx23",
- NULL,
-};
+#define MX23_CLKCTRL_RESET_OFFSET 0x120
+#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
+#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+static void mxs_restart(char mode, const char *cmd)
+{
+ struct device_node *np;
+ void __iomem *reset_addr;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+ reset_addr = of_iomap(np, 0);
+ if (!reset_addr)
+ goto soft;
-static const char *imx28_dt_compat[] __initdata = {
+ if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+ reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+ else
+ reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+
+ /* reset the chip */
+ __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
+
+ pr_err("Failed to assert the chip reset\n");
+
+ /* Delay to allow the serial port to show the message */
+ mdelay(50);
+
+soft:
+ /* We'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
+
+static void __init mxs_timer_init(void)
+{
+ if (of_machine_is_compatible("fsl,imx23"))
+ mx23_clocks_init();
+ else
+ mx28_clocks_init();
+ clocksource_of_init();
+}
+
+static const char *mxs_dt_compat[] __initdata = {
"fsl,imx28",
+ "fsl,imx23",
NULL,
};
-DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
- .map_io = mx23_map_io,
- .init_irq = icoll_init_irq,
- .handle_irq = icoll_handle_irq,
- .init_time = imx23_timer_init,
- .init_machine = mxs_machine_init,
- .dt_compat = imx23_dt_compat,
- .restart = mxs_restart,
-MACHINE_END
-
-DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
- .map_io = mx28_map_io,
- .init_irq = icoll_init_irq,
+DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
+ .map_io = debug_ll_io_init,
+ .init_irq = irqchip_init,
.handle_irq = icoll_handle_irq,
- .init_time = imx28_timer_init,
+ .init_time = mxs_timer_init,
.init_machine = mxs_machine_init,
- .dt_compat = imx28_dt_compat,
+ .dt_compat = mxs_dt_compat,
.restart = mxs_restart,
MACHINE_END
+++ /dev/null
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
- mxs_map_entry(MX23, OCRAM, MT_DEVICE),
- mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
- mxs_map_entry(MX28, OCRAM, MT_DEVICE),
- mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
- iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx28_map_io(void)
-{
- iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}
+++ /dev/null
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-
-#include <asm/processor.h> /* for cpu_relax() */
-
-#include <mach/mxs.h>
-
-#define OCOTP_WORD_OFFSET 0x20
-#define OCOTP_WORD_COUNT 0x20
-
-#define BM_OCOTP_CTRL_BUSY (1 << 8)
-#define BM_OCOTP_CTRL_ERROR (1 << 9)
-#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
-
-static DEFINE_MUTEX(ocotp_mutex);
-static u32 ocotp_words[OCOTP_WORD_COUNT];
-
-const u32 *mxs_get_ocotp(void)
-{
- void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
- int timeout = 0x400;
- size_t i;
- static int once = 0;
-
- if (once)
- return ocotp_words;
-
- mutex_lock(&ocotp_mutex);
-
- /*
- * clk_enable(hbus_clk) for ocotp can be skipped
- * as it must be on when system is running.
- */
-
- /* try to clear ERROR bit */
- __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
-
- /* check both BUSY and ERROR cleared */
- while ((__raw_readl(ocotp_base) &
- (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- goto error_unlock;
-
- /* open OCOTP banks for read */
- __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
- /* approximately wait 32 hclk cycles */
- udelay(1);
-
- /* poll BUSY bit becoming cleared */
- timeout = 0x400;
- while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- goto error_unlock;
-
- for (i = 0; i < OCOTP_WORD_COUNT; i++)
- ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
- i * 0x10);
-
- /* close banks for power saving */
- __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
- once = 1;
-
- mutex_unlock(&ocotp_mutex);
-
- return ocotp_words;
-
-error_unlock:
- mutex_unlock(&ocotp_mutex);
- pr_err("%s: timeout in reading OCOTP\n", __func__);
- return NULL;
-}
+++ /dev/null
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define MX23_CLKCTRL_RESET_OFFSET 0x120
-#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
-#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
-
-#define MXS_MODULE_CLKGATE (1 << 30)
-#define MXS_MODULE_SFTRST (1 << 31)
-
-static void __iomem *mxs_clkctrl_reset_addr;
-
-/*
- * Reset the system. It is called by machine_restart().
- */
-void mxs_restart(char mode, const char *cmd)
-{
- /* reset the chip */
- __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
-
- pr_err("Failed to assert the chip reset\n");
-
- /* Delay to allow the serial port to show the message */
- mdelay(50);
-
- /* We'll take a jump through zero as a poor second */
- soft_restart(0);
-}
-
-static int __init mxs_arch_reset_init(void)
-{
- struct clk *clk;
-
- mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) +
- (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET :
- MX28_CLKCTRL_RESET_OFFSET);
-
- clk = clk_get_sys("rtc", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-
- return 0;
-}
-core_initcall(mxs_arch_reset_init);
-
-/*
- * Clear the bit and poll it cleared. This is usually called with
- * a reset address and mask being either SFTRST(bit 31) or CLKGATE
- * (bit 30).
- */
-static int clear_poll_bit(void __iomem *addr, u32 mask)
-{
- int timeout = 0x400;
-
- /* clear the bit */
- __mxs_clrl(mask, addr);
-
- /*
- * SFTRST needs 3 GPMI clocks to settle, the reference manual
- * recommends to wait 1us.
- */
- udelay(1);
-
- /* poll the bit becoming clear */
- while ((__raw_readl(addr) & mask) && --timeout)
- /* nothing */;
-
- return !timeout;
-}
-
-int mxs_reset_block(void __iomem *reset_addr)
-{
- int ret;
- int timeout = 0x400;
-
- /* clear and poll SFTRST */
- ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
- if (unlikely(ret))
- goto error;
-
- /* clear CLKGATE */
- __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
-
- /* set SFTRST to reset the block */
- __mxs_setl(MXS_MODULE_SFTRST, reset_addr);
- udelay(1);
-
- /* poll CLKGATE becoming set */
- while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
- /* nothing */;
- if (unlikely(!timeout))
- goto error;
-
- /* clear and poll SFTRST */
- ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
- if (unlikely(ret))
- goto error;
-
- /* clear and poll CLKGATE */
- ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
- if (unlikely(ret))
- goto error;
-
- return 0;
-
-error:
- pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
- return -ETIMEDOUT;
-}
-EXPORT_SYMBOL(mxs_reset_block);
+++ /dev/null
-/*
- * Copyright (C) 2000-2001 Deep Blue Solutions
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-/*
- * There are 2 versions of the timrot on Freescale MXS-based SoCs.
- * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
- * extends the counter to 32 bits.
- *
- * The implementation uses two timers, one for clock_event and
- * another for clocksource. MX28 uses timrot 0 and 1, while MX23
- * uses 0 and 2.
- */
-
-#define MX23_TIMROT_VERSION_OFFSET 0x0a0
-#define MX28_TIMROT_VERSION_OFFSET 0x120
-#define BP_TIMROT_MAJOR_VERSION 24
-#define BV_TIMROT_VERSION_1 0x01
-#define BV_TIMROT_VERSION_2 0x02
-#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1)
-
-/*
- * There are 4 registers for each timrotv2 instance, and 2 registers
- * for each timrotv1. So address step 0x40 in macros below strides
- * one instance of timrotv2 while two instances of timrotv1.
- *
- * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
- * on MX28 while timrot2 on MX23.
- */
-/* common between v1 and v2 */
-#define HW_TIMROT_ROTCTRL 0x00
-#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40)
-/* v1 only */
-#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40)
-/* v2 only */
-#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40)
-#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40)
-
-#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6)
-#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7)
-#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
-#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15)
-#define BP_TIMROT_TIMCTRLn_SELECT 0
-#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
-#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
-#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf
-
-static struct clock_event_device mxs_clockevent_device;
-static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR);
-static u32 timrot_major_version;
-
-static inline void timrot_irq_disable(void)
-{
- __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-}
-
-static inline void timrot_irq_enable(void)
-{
- __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-}
-
-static void timrot_irq_acknowledge(void)
-{
- __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-}
-
-static cycle_t timrotv1_get_cycles(struct clocksource *cs)
-{
- return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
- & 0xffff0000) >> 16);
-}
-
-static int timrotv1_set_next_event(unsigned long evt,
- struct clock_event_device *dev)
-{
- /* timrot decrements the count */
- __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
-
- return 0;
-}
-
-static int timrotv2_set_next_event(unsigned long evt,
- struct clock_event_device *dev)
-{
- /* timrot decrements the count */
- __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
-
- return 0;
-}
-
-static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- timrot_irq_acknowledge();
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction mxs_timer_irq = {
- .name = "MXS Timer Tick",
- .dev_id = &mxs_clockevent_device,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = mxs_timer_interrupt,
-};
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[] const = {
- [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
- [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
- [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
- [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /* DEBUG */
-
-static void mxs_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- /* Disable interrupt in timer module */
- timrot_irq_disable();
-
- if (mode != mxs_clockevent_mode) {
- /* Set event time into the furthest future */
- if (timrot_is_v1())
- __raw_writel(0xffff,
- mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
- else
- __raw_writel(0xffffffff,
- mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
-
- /* Clear pending interrupt */
- timrot_irq_acknowledge();
- }
-
-#ifdef DEBUG
- pr_info("%s: changing mode from %s to %s\n", __func__,
- clock_event_mode_label[mxs_clockevent_mode],
- clock_event_mode_label[mode]);
-#endif /* DEBUG */
-
- /* Remember timer mode */
- mxs_clockevent_mode = mode;
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- pr_err("%s: Periodic mode is not implemented\n", __func__);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- timrot_irq_enable();
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- /* Left event sources disabled, no more interrupts appear */
- break;
- }
-}
-
-static struct clock_event_device mxs_clockevent_device = {
- .name = "mxs_timrot",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = mxs_set_mode,
- .set_next_event = timrotv2_set_next_event,
- .rating = 200,
-};
-
-static int __init mxs_clockevent_init(struct clk *timer_clk)
-{
- if (timrot_is_v1())
- mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
- mxs_clockevent_device.cpumask = cpumask_of(0);
- clockevents_config_and_register(&mxs_clockevent_device,
- clk_get_rate(timer_clk),
- timrot_is_v1() ? 0xf : 0x2,
- timrot_is_v1() ? 0xfffe : 0xfffffffe);
-
- return 0;
-}
-
-static struct clocksource clocksource_mxs = {
- .name = "mxs_timer",
- .rating = 200,
- .read = timrotv1_get_cycles,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static u32 notrace mxs_read_sched_clock_v2(void)
-{
- return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
-}
-
-static int __init mxs_clocksource_init(struct clk *timer_clk)
-{
- unsigned int c = clk_get_rate(timer_clk);
-
- if (timrot_is_v1())
- clocksource_register_hz(&clocksource_mxs, c);
- else {
- clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
- "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
- setup_sched_clock(mxs_read_sched_clock_v2, 32, c);
- }
-
- return 0;
-}
-
-void __init mxs_timer_init(void)
-{
- struct device_node *np;
- struct clk *timer_clk;
- int irq;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,timrot");
- if (!np) {
- pr_err("%s: failed find timrot node\n", __func__);
- return;
- }
-
- timer_clk = clk_get_sys("timrot", NULL);
- if (IS_ERR(timer_clk)) {
- pr_err("%s: failed to get clk\n", __func__);
- return;
- }
-
- clk_prepare_enable(timer_clk);
-
- /*
- * Initialize timers to a known state
- */
- mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
-
- /* get timrot version */
- timrot_major_version = __raw_readl(mxs_timrot_base +
- (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET :
- MX28_TIMROT_VERSION_OFFSET));
- timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
-
- /* one for clock_event */
- __raw_writel((timrot_is_v1() ?
- BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
- BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-
- /* another for clocksource */
- __raw_writel((timrot_is_v1() ?
- BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
- BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
- BM_TIMROT_TIMCTRLn_RELOAD,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
-
- /* set clocksource timer fixed count to the maximum */
- if (timrot_is_v1())
- __raw_writel(0xffff,
- mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
- else
- __raw_writel(0xffffffff,
- mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
-
- /* init and register the timer to the framework */
- mxs_clocksource_init(timer_clk);
- mxs_clockevent_init(timer_clk);
-
- /* Make irqs happen */
- irq = irq_of_parse_and_map(np, 0);
- setup_irq(irq, &mxs_timer_irq);
-}
#include <plat/i2c.h>
+#include <mach/irqs.h>
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
#else
/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
-#define OMAP_DMA_MCSI1_TX 1
-#define OMAP_DMA_MCSI1_RX 2
-#define OMAP_DMA_I2C_RX 3
-#define OMAP_DMA_I2C_TX 4
-#define OMAP_DMA_EXT_NDMA_REQ 5
-#define OMAP_DMA_EXT_NDMA_REQ2 6
-#define OMAP_DMA_UWIRE_TX 7
#define OMAP_DMA_MCBSP1_TX 8
#define OMAP_DMA_MCBSP1_RX 9
#define OMAP_DMA_MCBSP3_TX 10
#define OMAP_DMA_MCBSP3_RX 11
-#define OMAP_DMA_UART1_TX 12
-#define OMAP_DMA_UART1_RX 13
-#define OMAP_DMA_UART2_TX 14
-#define OMAP_DMA_UART2_RX 15
#define OMAP_DMA_MCBSP2_TX 16
#define OMAP_DMA_MCBSP2_RX 17
#define OMAP_DMA_UART3_TX 18
#define OMAP_DMA_CAMERA_IF_RX 20
#define OMAP_DMA_MMC_TX 21
#define OMAP_DMA_MMC_RX 22
-#define OMAP_DMA_NAND 23
-#define OMAP_DMA_IRQ_LCD_LINE 24
-#define OMAP_DMA_MEMORY_STICK 25
#define OMAP_DMA_USB_W2FC_RX0 26
-#define OMAP_DMA_USB_W2FC_RX1 27
-#define OMAP_DMA_USB_W2FC_RX2 28
#define OMAP_DMA_USB_W2FC_TX0 29
-#define OMAP_DMA_USB_W2FC_TX1 30
-#define OMAP_DMA_USB_W2FC_TX2 31
/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN 32
-#define OMAP_DMA_SPI_TX 33
-#define OMAP_DMA_SPI_RX 34
-#define OMAP_DMA_CRYPTO_HASH 35
-#define OMAP_DMA_CCP_ATTN 36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
#define OMAP_DMA_MMC2_TX 54
#define OMAP_DMA_MMC2_RX 55
-#define OMAP_DMA_CRYPTO_DES_OUT 56
#endif /* __OMAP1_DMA_CHANNEL_H */
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SERIAL_8250
- select SERIAL_8250_CONSOLE
- select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
default y
select OMAP_PACKAGE_CBP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SERIAL_8250
- select SERIAL_8250_CONSOLE
- select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
.init_time = omap3_secure_sync32k_timer_init,
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/usb/phy.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
static struct omap_clk omap2420_clks[] = {
/* external root sources */
- CLK(NULL, "func_32k_ck", &func_32k_ck, CK_242X),
- CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_242X),
- CLK(NULL, "osc_ck", &osc_ck, CK_242X),
- CLK(NULL, "sys_ck", &sys_ck, CK_242X),
- CLK(NULL, "alt_ck", &alt_ck, CK_242X),
- CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X),
+ CLK(NULL, "func_32k_ck", &func_32k_ck),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck),
+ CLK(NULL, "osc_ck", &osc_ck),
+ CLK(NULL, "sys_ck", &sys_ck),
+ CLK(NULL, "alt_ck", &alt_ck),
+ CLK(NULL, "mcbsp_clks", &mcbsp_clks),
/* internal analog sources */
- CLK(NULL, "dpll_ck", &dpll_ck, CK_242X),
- CLK(NULL, "apll96_ck", &apll96_ck, CK_242X),
- CLK(NULL, "apll54_ck", &apll54_ck, CK_242X),
+ CLK(NULL, "dpll_ck", &dpll_ck),
+ CLK(NULL, "apll96_ck", &apll96_ck),
+ CLK(NULL, "apll54_ck", &apll54_ck),
/* internal prcm root sources */
- CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X),
- CLK(NULL, "core_ck", &core_ck, CK_242X),
- CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X),
- CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X),
- CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X),
- CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_242X),
- CLK(NULL, "sys_clkout", &sys_clkout, CK_242X),
- CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
- CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
- CLK(NULL, "emul_ck", &emul_ck, CK_242X),
+ CLK(NULL, "func_54m_ck", &func_54m_ck),
+ CLK(NULL, "core_ck", &core_ck),
+ CLK(NULL, "func_96m_ck", &func_96m_ck),
+ CLK(NULL, "func_48m_ck", &func_48m_ck),
+ CLK(NULL, "func_12m_ck", &func_12m_ck),
+ CLK(NULL, "sys_clkout_src", &sys_clkout_src),
+ CLK(NULL, "sys_clkout", &sys_clkout),
+ CLK(NULL, "sys_clkout2_src", &sys_clkout2_src),
+ CLK(NULL, "sys_clkout2", &sys_clkout2),
+ CLK(NULL, "emul_ck", &emul_ck),
/* mpu domain clocks */
- CLK(NULL, "mpu_ck", &mpu_ck, CK_242X),
+ CLK(NULL, "mpu_ck", &mpu_ck),
/* dsp domain clocks */
- CLK(NULL, "dsp_fck", &dsp_fck, CK_242X),
- CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
- CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
- CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+ CLK(NULL, "dsp_fck", &dsp_fck),
+ CLK(NULL, "dsp_ick", &dsp_ick),
+ CLK(NULL, "iva1_ifck", &iva1_ifck),
+ CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck),
/* GFX domain clocks */
- CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_242X),
- CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X),
- CLK(NULL, "gfx_ick", &gfx_ick, CK_242X),
+ CLK(NULL, "gfx_3d_fck", &gfx_3d_fck),
+ CLK(NULL, "gfx_2d_fck", &gfx_2d_fck),
+ CLK(NULL, "gfx_ick", &gfx_ick),
/* DSS domain clocks */
- CLK("omapdss_dss", "ick", &dss_ick, CK_242X),
- CLK(NULL, "dss_ick", &dss_ick, CK_242X),
- CLK(NULL, "dss1_fck", &dss1_fck, CK_242X),
- CLK(NULL, "dss2_fck", &dss2_fck, CK_242X),
- CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X),
+ CLK("omapdss_dss", "ick", &dss_ick),
+ CLK(NULL, "dss_ick", &dss_ick),
+ CLK(NULL, "dss1_fck", &dss1_fck),
+ CLK(NULL, "dss2_fck", &dss2_fck),
+ CLK(NULL, "dss_54m_fck", &dss_54m_fck),
/* L3 domain clocks */
- CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X),
- CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_242X),
+ CLK(NULL, "core_l3_ck", &core_l3_ck),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick),
/* L4 domain clocks */
- CLK(NULL, "l4_ck", &l4_ck, CK_242X),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X),
+ CLK(NULL, "l4_ck", &l4_ck),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick),
/* virtual meta-group clock */
- CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X),
+ CLK(NULL, "virt_prcm_set", &virt_prcm_set),
/* general l4 interface ck, multi-parent functional clk */
- CLK(NULL, "gpt1_ick", &gpt1_ick, CK_242X),
- CLK(NULL, "gpt1_fck", &gpt1_fck, CK_242X),
- CLK(NULL, "gpt2_ick", &gpt2_ick, CK_242X),
- CLK(NULL, "gpt2_fck", &gpt2_fck, CK_242X),
- CLK(NULL, "gpt3_ick", &gpt3_ick, CK_242X),
- CLK(NULL, "gpt3_fck", &gpt3_fck, CK_242X),
- CLK(NULL, "gpt4_ick", &gpt4_ick, CK_242X),
- CLK(NULL, "gpt4_fck", &gpt4_fck, CK_242X),
- CLK(NULL, "gpt5_ick", &gpt5_ick, CK_242X),
- CLK(NULL, "gpt5_fck", &gpt5_fck, CK_242X),
- CLK(NULL, "gpt6_ick", &gpt6_ick, CK_242X),
- CLK(NULL, "gpt6_fck", &gpt6_fck, CK_242X),
- CLK(NULL, "gpt7_ick", &gpt7_ick, CK_242X),
- CLK(NULL, "gpt7_fck", &gpt7_fck, CK_242X),
- CLK(NULL, "gpt8_ick", &gpt8_ick, CK_242X),
- CLK(NULL, "gpt8_fck", &gpt8_fck, CK_242X),
- CLK(NULL, "gpt9_ick", &gpt9_ick, CK_242X),
- CLK(NULL, "gpt9_fck", &gpt9_fck, CK_242X),
- CLK(NULL, "gpt10_ick", &gpt10_ick, CK_242X),
- CLK(NULL, "gpt10_fck", &gpt10_fck, CK_242X),
- CLK(NULL, "gpt11_ick", &gpt11_ick, CK_242X),
- CLK(NULL, "gpt11_fck", &gpt11_fck, CK_242X),
- CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X),
- CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X),
- CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_242X),
- CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X),
- CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_242X),
- CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X),
- CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_242X),
- CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X),
- CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_242X),
- CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X),
- CLK(NULL, "uart1_ick", &uart1_ick, CK_242X),
- CLK(NULL, "uart1_fck", &uart1_fck, CK_242X),
- CLK(NULL, "uart2_ick", &uart2_ick, CK_242X),
- CLK(NULL, "uart2_fck", &uart2_fck, CK_242X),
- CLK(NULL, "uart3_ick", &uart3_ick, CK_242X),
- CLK(NULL, "uart3_fck", &uart3_fck, CK_242X),
- CLK(NULL, "gpios_ick", &gpios_ick, CK_242X),
- CLK(NULL, "gpios_fck", &gpios_fck, CK_242X),
- CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X),
- CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_242X),
- CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X),
- CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X),
- CLK("omap24xxcam", "fck", &cam_fck, CK_242X),
- CLK(NULL, "cam_fck", &cam_fck, CK_242X),
- CLK("omap24xxcam", "ick", &cam_ick, CK_242X),
- CLK(NULL, "cam_ick", &cam_ick, CK_242X),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X),
- CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X),
- CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X),
- CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
- CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
- CLK(NULL, "mspro_ick", &mspro_ick, CK_242X),
- CLK(NULL, "mspro_fck", &mspro_fck, CK_242X),
- CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
- CLK(NULL, "mmc_ick", &mmc_ick, CK_242X),
- CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
- CLK(NULL, "mmc_fck", &mmc_fck, CK_242X),
- CLK(NULL, "fac_ick", &fac_ick, CK_242X),
- CLK(NULL, "fac_fck", &fac_fck, CK_242X),
- CLK(NULL, "eac_ick", &eac_ick, CK_242X),
- CLK(NULL, "eac_fck", &eac_fck, CK_242X),
- CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X),
- CLK(NULL, "hdq_ick", &hdq_ick, CK_242X),
- CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X),
- CLK(NULL, "hdq_fck", &hdq_fck, CK_242X),
- CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X),
- CLK(NULL, "i2c1_ick", &i2c1_ick, CK_242X),
- CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X),
- CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X),
- CLK(NULL, "i2c2_ick", &i2c2_ick, CK_242X),
- CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X),
- CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X),
- CLK(NULL, "sdma_fck", &sdma_fck, CK_242X),
- CLK(NULL, "sdma_ick", &sdma_ick, CK_242X),
- CLK(NULL, "sdrc_ick", &sdrc_ick, CK_242X),
- CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
- CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
- CLK(NULL, "des_ick", &des_ick, CK_242X),
- CLK("omap-sham", "ick", &sha_ick, CK_242X),
- CLK(NULL, "sha_ick", &sha_ick, CK_242X),
- CLK("omap_rng", "ick", &rng_ick, CK_242X),
- CLK(NULL, "rng_ick", &rng_ick, CK_242X),
- CLK("omap-aes", "ick", &aes_ick, CK_242X),
- CLK(NULL, "aes_ick", &aes_ick, CK_242X),
- CLK(NULL, "pka_ick", &pka_ick, CK_242X),
- CLK(NULL, "usb_fck", &usb_fck, CK_242X),
- CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
- CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X),
- CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X),
- CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X),
- CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_242X),
+ CLK(NULL, "gpt1_ick", &gpt1_ick),
+ CLK(NULL, "gpt1_fck", &gpt1_fck),
+ CLK(NULL, "gpt2_ick", &gpt2_ick),
+ CLK(NULL, "gpt2_fck", &gpt2_fck),
+ CLK(NULL, "gpt3_ick", &gpt3_ick),
+ CLK(NULL, "gpt3_fck", &gpt3_fck),
+ CLK(NULL, "gpt4_ick", &gpt4_ick),
+ CLK(NULL, "gpt4_fck", &gpt4_fck),
+ CLK(NULL, "gpt5_ick", &gpt5_ick),
+ CLK(NULL, "gpt5_fck", &gpt5_fck),
+ CLK(NULL, "gpt6_ick", &gpt6_ick),
+ CLK(NULL, "gpt6_fck", &gpt6_fck),
+ CLK(NULL, "gpt7_ick", &gpt7_ick),
+ CLK(NULL, "gpt7_fck", &gpt7_fck),
+ CLK(NULL, "gpt8_ick", &gpt8_ick),
+ CLK(NULL, "gpt8_fck", &gpt8_fck),
+ CLK(NULL, "gpt9_ick", &gpt9_ick),
+ CLK(NULL, "gpt9_fck", &gpt9_fck),
+ CLK(NULL, "gpt10_ick", &gpt10_ick),
+ CLK(NULL, "gpt10_fck", &gpt10_fck),
+ CLK(NULL, "gpt11_ick", &gpt11_ick),
+ CLK(NULL, "gpt11_fck", &gpt11_fck),
+ CLK(NULL, "gpt12_ick", &gpt12_ick),
+ CLK(NULL, "gpt12_fck", &gpt12_fck),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick),
+ CLK(NULL, "mcbsp1_ick", &mcbsp1_ick),
+ CLK(NULL, "mcbsp1_fck", &mcbsp1_fck),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick),
+ CLK(NULL, "mcbsp2_ick", &mcbsp2_ick),
+ CLK(NULL, "mcbsp2_fck", &mcbsp2_fck),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick),
+ CLK(NULL, "mcspi1_ick", &mcspi1_ick),
+ CLK(NULL, "mcspi1_fck", &mcspi1_fck),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick),
+ CLK(NULL, "mcspi2_ick", &mcspi2_ick),
+ CLK(NULL, "mcspi2_fck", &mcspi2_fck),
+ CLK(NULL, "uart1_ick", &uart1_ick),
+ CLK(NULL, "uart1_fck", &uart1_fck),
+ CLK(NULL, "uart2_ick", &uart2_ick),
+ CLK(NULL, "uart2_fck", &uart2_fck),
+ CLK(NULL, "uart3_ick", &uart3_ick),
+ CLK(NULL, "uart3_fck", &uart3_fck),
+ CLK(NULL, "gpios_ick", &gpios_ick),
+ CLK(NULL, "gpios_fck", &gpios_fck),
+ CLK("omap_wdt", "ick", &mpu_wdt_ick),
+ CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick),
+ CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck),
+ CLK(NULL, "sync_32k_ick", &sync_32k_ick),
+ CLK(NULL, "wdt1_ick", &wdt1_ick),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick),
+ CLK("omap24xxcam", "fck", &cam_fck),
+ CLK(NULL, "cam_fck", &cam_fck),
+ CLK("omap24xxcam", "ick", &cam_ick),
+ CLK(NULL, "cam_ick", &cam_ick),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick),
+ CLK(NULL, "wdt4_ick", &wdt4_ick),
+ CLK(NULL, "wdt4_fck", &wdt4_fck),
+ CLK(NULL, "wdt3_ick", &wdt3_ick),
+ CLK(NULL, "wdt3_fck", &wdt3_fck),
+ CLK(NULL, "mspro_ick", &mspro_ick),
+ CLK(NULL, "mspro_fck", &mspro_fck),
+ CLK("mmci-omap.0", "ick", &mmc_ick),
+ CLK(NULL, "mmc_ick", &mmc_ick),
+ CLK("mmci-omap.0", "fck", &mmc_fck),
+ CLK(NULL, "mmc_fck", &mmc_fck),
+ CLK(NULL, "fac_ick", &fac_ick),
+ CLK(NULL, "fac_fck", &fac_fck),
+ CLK(NULL, "eac_ick", &eac_ick),
+ CLK(NULL, "eac_fck", &eac_fck),
+ CLK("omap_hdq.0", "ick", &hdq_ick),
+ CLK(NULL, "hdq_ick", &hdq_ick),
+ CLK("omap_hdq.0", "fck", &hdq_fck),
+ CLK(NULL, "hdq_fck", &hdq_fck),
+ CLK("omap_i2c.1", "ick", &i2c1_ick),
+ CLK(NULL, "i2c1_ick", &i2c1_ick),
+ CLK(NULL, "i2c1_fck", &i2c1_fck),
+ CLK("omap_i2c.2", "ick", &i2c2_ick),
+ CLK(NULL, "i2c2_ick", &i2c2_ick),
+ CLK(NULL, "i2c2_fck", &i2c2_fck),
+ CLK(NULL, "gpmc_fck", &gpmc_fck),
+ CLK(NULL, "sdma_fck", &sdma_fck),
+ CLK(NULL, "sdma_ick", &sdma_ick),
+ CLK(NULL, "sdrc_ick", &sdrc_ick),
+ CLK(NULL, "vlynq_ick", &vlynq_ick),
+ CLK(NULL, "vlynq_fck", &vlynq_fck),
+ CLK(NULL, "des_ick", &des_ick),
+ CLK("omap-sham", "ick", &sha_ick),
+ CLK(NULL, "sha_ick", &sha_ick),
+ CLK("omap_rng", "ick", &rng_ick),
+ CLK(NULL, "rng_ick", &rng_ick),
+ CLK("omap-aes", "ick", &aes_ick),
+ CLK(NULL, "aes_ick", &aes_ick),
+ CLK(NULL, "pka_ick", &pka_ick),
+ CLK(NULL, "usb_fck", &usb_fck),
+ CLK("musb-hdrc", "fck", &osc_ck),
+ CLK(NULL, "timer_32k_ck", &func_32k_ck),
+ CLK(NULL, "timer_sys_ck", &sys_ck),
+ CLK(NULL, "timer_ext_ck", &alt_ck),
+ CLK(NULL, "cpufreq_ck", &virt_prcm_set),
};
int __init omap2420_clk_init(void)
{
- struct omap_clk *c;
-
prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_242X;
rate_table = omap2420_rate_table;
omap2xxx_clkt_vps_check_bootloader_rates();
- for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
- c++) {
- clkdev_add(&c->lk);
- if (!__clk_init(NULL, c->lk.clk))
- omap2_init_clk_hw_omap_clocks(c->lk.clk);
- }
+ omap_clocks_register(omap2420_clks, ARRAY_SIZE(omap2420_clks));
omap2xxx_clkt_vps_late_init();
static struct omap_clk omap2430_clks[] = {
/* external root sources */
- CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X),
- CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X),
- CLK(NULL, "osc_ck", &osc_ck, CK_243X),
- CLK("twl", "fck", &osc_ck, CK_243X),
- CLK(NULL, "sys_ck", &sys_ck, CK_243X),
- CLK(NULL, "alt_ck", &alt_ck, CK_243X),
- CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X),
+ CLK(NULL, "func_32k_ck", &func_32k_ck),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck),
+ CLK(NULL, "osc_ck", &osc_ck),
+ CLK("twl", "fck", &osc_ck),
+ CLK(NULL, "sys_ck", &sys_ck),
+ CLK(NULL, "alt_ck", &alt_ck),
+ CLK(NULL, "mcbsp_clks", &mcbsp_clks),
/* internal analog sources */
- CLK(NULL, "dpll_ck", &dpll_ck, CK_243X),
- CLK(NULL, "apll96_ck", &apll96_ck, CK_243X),
- CLK(NULL, "apll54_ck", &apll54_ck, CK_243X),
+ CLK(NULL, "dpll_ck", &dpll_ck),
+ CLK(NULL, "apll96_ck", &apll96_ck),
+ CLK(NULL, "apll54_ck", &apll54_ck),
/* internal prcm root sources */
- CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X),
- CLK(NULL, "core_ck", &core_ck, CK_243X),
- CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X),
- CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X),
- CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X),
- CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X),
- CLK(NULL, "sys_clkout", &sys_clkout, CK_243X),
- CLK(NULL, "emul_ck", &emul_ck, CK_243X),
+ CLK(NULL, "func_54m_ck", &func_54m_ck),
+ CLK(NULL, "core_ck", &core_ck),
+ CLK(NULL, "func_96m_ck", &func_96m_ck),
+ CLK(NULL, "func_48m_ck", &func_48m_ck),
+ CLK(NULL, "func_12m_ck", &func_12m_ck),
+ CLK(NULL, "sys_clkout_src", &sys_clkout_src),
+ CLK(NULL, "sys_clkout", &sys_clkout),
+ CLK(NULL, "emul_ck", &emul_ck),
/* mpu domain clocks */
- CLK(NULL, "mpu_ck", &mpu_ck, CK_243X),
+ CLK(NULL, "mpu_ck", &mpu_ck),
/* dsp domain clocks */
- CLK(NULL, "dsp_fck", &dsp_fck, CK_243X),
- CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
+ CLK(NULL, "dsp_fck", &dsp_fck),
+ CLK(NULL, "iva2_1_ick", &iva2_1_ick),
/* GFX domain clocks */
- CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X),
- CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X),
- CLK(NULL, "gfx_ick", &gfx_ick, CK_243X),
+ CLK(NULL, "gfx_3d_fck", &gfx_3d_fck),
+ CLK(NULL, "gfx_2d_fck", &gfx_2d_fck),
+ CLK(NULL, "gfx_ick", &gfx_ick),
/* Modem domain clocks */
- CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
- CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
+ CLK(NULL, "mdm_ick", &mdm_ick),
+ CLK(NULL, "mdm_osc_ck", &mdm_osc_ck),
/* DSS domain clocks */
- CLK("omapdss_dss", "ick", &dss_ick, CK_243X),
- CLK(NULL, "dss_ick", &dss_ick, CK_243X),
- CLK(NULL, "dss1_fck", &dss1_fck, CK_243X),
- CLK(NULL, "dss2_fck", &dss2_fck, CK_243X),
- CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X),
+ CLK("omapdss_dss", "ick", &dss_ick),
+ CLK(NULL, "dss_ick", &dss_ick),
+ CLK(NULL, "dss1_fck", &dss1_fck),
+ CLK(NULL, "dss2_fck", &dss2_fck),
+ CLK(NULL, "dss_54m_fck", &dss_54m_fck),
/* L3 domain clocks */
- CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X),
- CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X),
+ CLK(NULL, "core_l3_ck", &core_l3_ck),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick),
/* L4 domain clocks */
- CLK(NULL, "l4_ck", &l4_ck, CK_243X),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X),
+ CLK(NULL, "l4_ck", &l4_ck),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick),
/* virtual meta-group clock */
- CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X),
+ CLK(NULL, "virt_prcm_set", &virt_prcm_set),
/* general l4 interface ck, multi-parent functional clk */
- CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X),
- CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X),
- CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X),
- CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X),
- CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X),
- CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X),
- CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X),
- CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X),
- CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X),
- CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X),
- CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X),
- CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X),
- CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X),
- CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X),
- CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X),
- CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X),
- CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X),
- CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X),
- CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X),
- CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X),
- CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X),
- CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X),
- CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X),
- CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X),
- CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_243X),
- CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X),
- CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_243X),
- CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X),
- CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
- CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_243X),
- CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X),
- CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
- CLK(NULL, "mcbsp4_ick", &mcbsp4_ick, CK_243X),
- CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X),
- CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
- CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_243X),
- CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X),
- CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_243X),
- CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X),
- CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_243X),
- CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X),
- CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
- CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_243X),
- CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X),
- CLK(NULL, "uart1_ick", &uart1_ick, CK_243X),
- CLK(NULL, "uart1_fck", &uart1_fck, CK_243X),
- CLK(NULL, "uart2_ick", &uart2_ick, CK_243X),
- CLK(NULL, "uart2_fck", &uart2_fck, CK_243X),
- CLK(NULL, "uart3_ick", &uart3_ick, CK_243X),
- CLK(NULL, "uart3_fck", &uart3_fck, CK_243X),
- CLK(NULL, "gpios_ick", &gpios_ick, CK_243X),
- CLK(NULL, "gpios_fck", &gpios_fck, CK_243X),
- CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X),
- CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X),
- CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X),
- CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X),
- CLK(NULL, "icr_ick", &icr_ick, CK_243X),
- CLK("omap24xxcam", "fck", &cam_fck, CK_243X),
- CLK(NULL, "cam_fck", &cam_fck, CK_243X),
- CLK("omap24xxcam", "ick", &cam_ick, CK_243X),
- CLK(NULL, "cam_ick", &cam_ick, CK_243X),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X),
- CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X),
- CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X),
- CLK(NULL, "mspro_ick", &mspro_ick, CK_243X),
- CLK(NULL, "mspro_fck", &mspro_fck, CK_243X),
- CLK(NULL, "fac_ick", &fac_ick, CK_243X),
- CLK(NULL, "fac_fck", &fac_fck, CK_243X),
- CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X),
- CLK(NULL, "hdq_ick", &hdq_ick, CK_243X),
- CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X),
- CLK(NULL, "hdq_fck", &hdq_fck, CK_243X),
- CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X),
- CLK(NULL, "i2c1_ick", &i2c1_ick, CK_243X),
- CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X),
- CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X),
- CLK(NULL, "i2c2_ick", &i2c2_ick, CK_243X),
- CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X),
- CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X),
- CLK(NULL, "sdma_fck", &sdma_fck, CK_243X),
- CLK(NULL, "sdma_ick", &sdma_ick, CK_243X),
- CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
- CLK(NULL, "des_ick", &des_ick, CK_243X),
- CLK("omap-sham", "ick", &sha_ick, CK_243X),
- CLK("omap_rng", "ick", &rng_ick, CK_243X),
- CLK(NULL, "rng_ick", &rng_ick, CK_243X),
- CLK("omap-aes", "ick", &aes_ick, CK_243X),
- CLK(NULL, "pka_ick", &pka_ick, CK_243X),
- CLK(NULL, "usb_fck", &usb_fck, CK_243X),
- CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X),
- CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
- CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X),
- CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_243X),
- CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X),
- CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X),
- CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_243X),
- CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X),
- CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
- CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
- CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
- CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
- CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck, CK_243X),
- CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
- CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck, CK_243X),
- CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X),
- CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X),
- CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X),
- CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_243X),
+ CLK(NULL, "gpt1_ick", &gpt1_ick),
+ CLK(NULL, "gpt1_fck", &gpt1_fck),
+ CLK(NULL, "gpt2_ick", &gpt2_ick),
+ CLK(NULL, "gpt2_fck", &gpt2_fck),
+ CLK(NULL, "gpt3_ick", &gpt3_ick),
+ CLK(NULL, "gpt3_fck", &gpt3_fck),
+ CLK(NULL, "gpt4_ick", &gpt4_ick),
+ CLK(NULL, "gpt4_fck", &gpt4_fck),
+ CLK(NULL, "gpt5_ick", &gpt5_ick),
+ CLK(NULL, "gpt5_fck", &gpt5_fck),
+ CLK(NULL, "gpt6_ick", &gpt6_ick),
+ CLK(NULL, "gpt6_fck", &gpt6_fck),
+ CLK(NULL, "gpt7_ick", &gpt7_ick),
+ CLK(NULL, "gpt7_fck", &gpt7_fck),
+ CLK(NULL, "gpt8_ick", &gpt8_ick),
+ CLK(NULL, "gpt8_fck", &gpt8_fck),
+ CLK(NULL, "gpt9_ick", &gpt9_ick),
+ CLK(NULL, "gpt9_fck", &gpt9_fck),
+ CLK(NULL, "gpt10_ick", &gpt10_ick),
+ CLK(NULL, "gpt10_fck", &gpt10_fck),
+ CLK(NULL, "gpt11_ick", &gpt11_ick),
+ CLK(NULL, "gpt11_fck", &gpt11_fck),
+ CLK(NULL, "gpt12_ick", &gpt12_ick),
+ CLK(NULL, "gpt12_fck", &gpt12_fck),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick),
+ CLK(NULL, "mcbsp1_ick", &mcbsp1_ick),
+ CLK(NULL, "mcbsp1_fck", &mcbsp1_fck),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick),
+ CLK(NULL, "mcbsp2_ick", &mcbsp2_ick),
+ CLK(NULL, "mcbsp2_fck", &mcbsp2_fck),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick),
+ CLK(NULL, "mcbsp3_ick", &mcbsp3_ick),
+ CLK(NULL, "mcbsp3_fck", &mcbsp3_fck),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick),
+ CLK(NULL, "mcbsp4_ick", &mcbsp4_ick),
+ CLK(NULL, "mcbsp4_fck", &mcbsp4_fck),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick),
+ CLK(NULL, "mcbsp5_ick", &mcbsp5_ick),
+ CLK(NULL, "mcbsp5_fck", &mcbsp5_fck),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick),
+ CLK(NULL, "mcspi1_ick", &mcspi1_ick),
+ CLK(NULL, "mcspi1_fck", &mcspi1_fck),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick),
+ CLK(NULL, "mcspi2_ick", &mcspi2_ick),
+ CLK(NULL, "mcspi2_fck", &mcspi2_fck),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick),
+ CLK(NULL, "mcspi3_ick", &mcspi3_ick),
+ CLK(NULL, "mcspi3_fck", &mcspi3_fck),
+ CLK(NULL, "uart1_ick", &uart1_ick),
+ CLK(NULL, "uart1_fck", &uart1_fck),
+ CLK(NULL, "uart2_ick", &uart2_ick),
+ CLK(NULL, "uart2_fck", &uart2_fck),
+ CLK(NULL, "uart3_ick", &uart3_ick),
+ CLK(NULL, "uart3_fck", &uart3_fck),
+ CLK(NULL, "gpios_ick", &gpios_ick),
+ CLK(NULL, "gpios_fck", &gpios_fck),
+ CLK("omap_wdt", "ick", &mpu_wdt_ick),
+ CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick),
+ CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck),
+ CLK(NULL, "sync_32k_ick", &sync_32k_ick),
+ CLK(NULL, "wdt1_ick", &wdt1_ick),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick),
+ CLK(NULL, "icr_ick", &icr_ick),
+ CLK("omap24xxcam", "fck", &cam_fck),
+ CLK(NULL, "cam_fck", &cam_fck),
+ CLK("omap24xxcam", "ick", &cam_ick),
+ CLK(NULL, "cam_ick", &cam_ick),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick),
+ CLK(NULL, "wdt4_ick", &wdt4_ick),
+ CLK(NULL, "wdt4_fck", &wdt4_fck),
+ CLK(NULL, "mspro_ick", &mspro_ick),
+ CLK(NULL, "mspro_fck", &mspro_fck),
+ CLK(NULL, "fac_ick", &fac_ick),
+ CLK(NULL, "fac_fck", &fac_fck),
+ CLK("omap_hdq.0", "ick", &hdq_ick),
+ CLK(NULL, "hdq_ick", &hdq_ick),
+ CLK("omap_hdq.1", "fck", &hdq_fck),
+ CLK(NULL, "hdq_fck", &hdq_fck),
+ CLK("omap_i2c.1", "ick", &i2c1_ick),
+ CLK(NULL, "i2c1_ick", &i2c1_ick),
+ CLK(NULL, "i2chs1_fck", &i2chs1_fck),
+ CLK("omap_i2c.2", "ick", &i2c2_ick),
+ CLK(NULL, "i2c2_ick", &i2c2_ick),
+ CLK(NULL, "i2chs2_fck", &i2chs2_fck),
+ CLK(NULL, "gpmc_fck", &gpmc_fck),
+ CLK(NULL, "sdma_fck", &sdma_fck),
+ CLK(NULL, "sdma_ick", &sdma_ick),
+ CLK(NULL, "sdrc_ick", &sdrc_ick),
+ CLK(NULL, "des_ick", &des_ick),
+ CLK("omap-sham", "ick", &sha_ick),
+ CLK("omap_rng", "ick", &rng_ick),
+ CLK(NULL, "rng_ick", &rng_ick),
+ CLK("omap-aes", "ick", &aes_ick),
+ CLK(NULL, "pka_ick", &pka_ick),
+ CLK(NULL, "usb_fck", &usb_fck),
+ CLK("musb-omap2430", "ick", &usbhs_ick),
+ CLK(NULL, "usbhs_ick", &usbhs_ick),
+ CLK("omap_hsmmc.0", "ick", &mmchs1_ick),
+ CLK(NULL, "mmchs1_ick", &mmchs1_ick),
+ CLK(NULL, "mmchs1_fck", &mmchs1_fck),
+ CLK("omap_hsmmc.1", "ick", &mmchs2_ick),
+ CLK(NULL, "mmchs2_ick", &mmchs2_ick),
+ CLK(NULL, "mmchs2_fck", &mmchs2_fck),
+ CLK(NULL, "gpio5_ick", &gpio5_ick),
+ CLK(NULL, "gpio5_fck", &gpio5_fck),
+ CLK(NULL, "mdm_intc_ick", &mdm_intc_ick),
+ CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck),
+ CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck),
+ CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck),
+ CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck),
+ CLK(NULL, "timer_32k_ck", &func_32k_ck),
+ CLK(NULL, "timer_sys_ck", &sys_ck),
+ CLK(NULL, "timer_ext_ck", &alt_ck),
+ CLK(NULL, "cpufreq_ck", &virt_prcm_set),
};
static const char *enable_init_clks[] = {
int __init omap2430_clk_init(void)
{
- struct omap_clk *c;
-
prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_243X;
rate_table = omap2430_rate_table;
omap2xxx_clkt_vps_check_bootloader_rates();
- for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
- c++) {
- clkdev_add(&c->lk);
- if (!__clk_init(NULL, c->lk.clk))
- omap2_init_clk_hw_omap_clocks(c->lk.clk);
- }
+ omap_clocks_register(omap2430_clks, ARRAY_SIZE(omap2430_clks));
omap2xxx_clkt_vps_late_init();
* clkdev
*/
static struct omap_clk am33xx_clks[] = {
- CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX),
- CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX),
- CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX),
- CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX),
- CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX),
- CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX),
- CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX),
- CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX),
- CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX),
- CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX),
- CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX),
- CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX),
- CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX),
- CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX),
- CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX),
- CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX),
- CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX),
- CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX),
- CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX),
- CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX),
- CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX),
- CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX),
- CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX),
- CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX),
- CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX),
- CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX),
- CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX),
- CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck, CK_AM33XX),
- CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX),
- CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX),
- CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX),
- CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX),
- CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX),
- CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX),
- CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX),
- CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX),
- CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX),
- CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
- CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
- CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX),
- CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX),
- CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX),
- CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
- CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX),
- CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX),
- CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX),
- CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX),
- CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX),
- CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX),
- CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX),
- CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX),
- CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX),
- CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX),
- CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX),
- CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX),
- CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX),
- CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX),
- CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX),
- CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX),
- CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX),
- CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX),
- CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX),
- CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX),
- CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX),
- CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX),
- CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX),
- CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX),
- CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX),
- CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX),
- CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX),
- CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX),
- CLK(NULL, "clkout2_div_ck", &clkout2_div_ck, CK_AM33XX),
- CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX),
- CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX),
+ CLK(NULL, "clk_32768_ck", &clk_32768_ck),
+ CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck),
+ CLK(NULL, "virt_19200000_ck", &virt_19200000_ck),
+ CLK(NULL, "virt_24000000_ck", &virt_24000000_ck),
+ CLK(NULL, "virt_25000000_ck", &virt_25000000_ck),
+ CLK(NULL, "virt_26000000_ck", &virt_26000000_ck),
+ CLK(NULL, "sys_clkin_ck", &sys_clkin_ck),
+ CLK(NULL, "tclkin_ck", &tclkin_ck),
+ CLK(NULL, "dpll_core_ck", &dpll_core_ck),
+ CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck),
+ CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck),
+ CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck),
+ CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck),
+ CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck),
+ CLK("cpu0", NULL, &dpll_mpu_ck),
+ CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck),
+ CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck),
+ CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck),
+ CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck),
+ CLK(NULL, "dpll_disp_ck", &dpll_disp_ck),
+ CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck),
+ CLK(NULL, "dpll_per_ck", &dpll_per_ck),
+ CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck),
+ CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck),
+ CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck),
+ CLK(NULL, "adc_tsc_fck", &adc_tsc_fck),
+ CLK(NULL, "cefuse_fck", &cefuse_fck),
+ CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck),
+ CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick),
+ CLK(NULL, "dcan0_fck", &dcan0_fck),
+ CLK("481cc000.d_can", NULL, &dcan0_fck),
+ CLK(NULL, "dcan1_fck", &dcan1_fck),
+ CLK("481d0000.d_can", NULL, &dcan1_fck),
+ CLK(NULL, "debugss_ick", &debugss_ick),
+ CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk),
+ CLK(NULL, "mcasp0_fck", &mcasp0_fck),
+ CLK(NULL, "mcasp1_fck", &mcasp1_fck),
+ CLK(NULL, "mmu_fck", &mmu_fck),
+ CLK(NULL, "smartreflex0_fck", &smartreflex0_fck),
+ CLK(NULL, "smartreflex1_fck", &smartreflex1_fck),
+ CLK(NULL, "timer1_fck", &timer1_fck),
+ CLK(NULL, "timer2_fck", &timer2_fck),
+ CLK(NULL, "timer3_fck", &timer3_fck),
+ CLK(NULL, "timer4_fck", &timer4_fck),
+ CLK(NULL, "timer5_fck", &timer5_fck),
+ CLK(NULL, "timer6_fck", &timer6_fck),
+ CLK(NULL, "timer7_fck", &timer7_fck),
+ CLK(NULL, "usbotg_fck", &usbotg_fck),
+ CLK(NULL, "ieee5000_fck", &ieee5000_fck),
+ CLK(NULL, "wdt1_fck", &wdt1_fck),
+ CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk),
+ CLK(NULL, "l3_gclk", &l3_gclk),
+ CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck),
+ CLK(NULL, "l4hs_gclk", &l4hs_gclk),
+ CLK(NULL, "l3s_gclk", &l3s_gclk),
+ CLK(NULL, "l4fw_gclk", &l4fw_gclk),
+ CLK(NULL, "l4ls_gclk", &l4ls_gclk),
+ CLK(NULL, "clk_24mhz", &clk_24mhz),
+ CLK(NULL, "sysclk_div_ck", &sysclk_div_ck),
+ CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk),
+ CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk),
+ CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck),
+ CLK(NULL, "gpio0_dbclk", &gpio0_dbclk),
+ CLK(NULL, "gpio1_dbclk", &gpio1_dbclk),
+ CLK(NULL, "gpio2_dbclk", &gpio2_dbclk),
+ CLK(NULL, "gpio3_dbclk", &gpio3_dbclk),
+ CLK(NULL, "lcd_gclk", &lcd_gclk),
+ CLK(NULL, "mmc_clk", &mmc_clk),
+ CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck),
+ CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck),
+ CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck),
+ CLK(NULL, "clkout2_div_ck", &clkout2_div_ck),
+ CLK(NULL, "timer_32k_ck", &clkdiv32k_ick),
+ CLK(NULL, "timer_sys_ck", &sys_clkin_ck),
};
int __init am33xx_clk_init(void)
{
- struct omap_clk *c;
- u32 cpu_clkflg;
-
- if (soc_is_am33xx()) {
+ if (soc_is_am33xx())
cpu_mask = RATE_IN_AM33XX;
- cpu_clkflg = CK_AM33XX;
- }
-
- for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) {
- if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
- if (!__clk_init(NULL, c->lk.clk))
- omap2_init_clk_hw_omap_clocks(c->lk.clk);
- }
- }
+
+ omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks));
omap2_clk_disable_autoidle_all();
DEFINE_STRUCT_CLK(wdt3_ick, gpio2_ick_parent_names, aes2_ick_ops);
/*
- * clkdev
+ * clocks specific to omap3430es1
+ */
+static struct omap_clk omap3430es1_clks[] = {
+ CLK(NULL, "gfx_l3_ck", &gfx_l3_ck),
+ CLK(NULL, "gfx_l3_fck", &gfx_l3_fck),
+ CLK(NULL, "gfx_l3_ick", &gfx_l3_ick),
+ CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck),
+ CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck),
+ CLK(NULL, "d2d_26m_fck", &d2d_26m_fck),
+ CLK(NULL, "fshostusb_fck", &fshostusb_fck),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1),
+ CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1),
+ CLK(NULL, "fac_ick", &fac_ick),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es1),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick),
+ CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1),
+ CLK("omapdss_dss", "ick", &dss_ick_3430es1),
+ CLK(NULL, "dss_ick", &dss_ick_3430es1),
+};
+
+/*
+ * clocks specific to am35xx
+ */
+static struct omap_clk am35xx_clks[] = {
+ CLK(NULL, "ipss_ick", &ipss_ick),
+ CLK(NULL, "rmii_ck", &rmii_ck),
+ CLK(NULL, "pclk_ck", &pclk_ck),
+ CLK(NULL, "emac_ick", &emac_ick),
+ CLK(NULL, "emac_fck", &emac_fck),
+ CLK("davinci_emac.0", NULL, &emac_ick),
+ CLK("davinci_mdio.0", NULL, &emac_fck),
+ CLK("vpfe-capture", "master", &vpfe_ick),
+ CLK("vpfe-capture", "slave", &vpfe_fck),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx),
+ CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx),
+ CLK(NULL, "hecc_ck", &hecc_ck),
+ CLK(NULL, "uart4_ick", &uart4_ick_am35xx),
+ CLK(NULL, "uart4_fck", &uart4_fck_am35xx),
+};
+
+/*
+ * clocks specific to omap36xx
+ */
+static struct omap_clk omap36xx_clks[] = {
+ CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck),
+ CLK(NULL, "uart4_fck", &uart4_fck),
+};
+
+/*
+ * clocks common to omap36xx omap34xx
+ */
+static struct omap_clk omap34xx_omap36xx_clks[] = {
+ CLK(NULL, "aes1_ick", &aes1_ick),
+ CLK("omap_rng", "ick", &rng_ick),
+ CLK(NULL, "sha11_ick", &sha11_ick),
+ CLK(NULL, "des1_ick", &des1_ick),
+ CLK(NULL, "cam_mclk", &cam_mclk),
+ CLK(NULL, "cam_ick", &cam_ick),
+ CLK(NULL, "csi2_96m_fck", &csi2_96m_fck),
+ CLK(NULL, "security_l3_ick", &security_l3_ick),
+ CLK(NULL, "pka_ick", &pka_ick),
+ CLK(NULL, "icr_ick", &icr_ick),
+ CLK("omap-aes", "ick", &aes2_ick),
+ CLK("omap-sham", "ick", &sha12_ick),
+ CLK(NULL, "des2_ick", &des2_ick),
+ CLK(NULL, "mspro_ick", &mspro_ick),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick),
+ CLK(NULL, "sr1_fck", &sr1_fck),
+ CLK(NULL, "sr2_fck", &sr2_fck),
+ CLK(NULL, "sr_l4_ick", &sr_l4_ick),
+ CLK(NULL, "security_l4_ick2", &security_l4_ick2),
+ CLK(NULL, "wkup_l4_ick", &wkup_l4_ick),
+ CLK(NULL, "dpll2_fck", &dpll2_fck),
+ CLK(NULL, "iva2_ck", &iva2_ck),
+ CLK(NULL, "modem_fck", &modem_fck),
+ CLK(NULL, "sad2d_ick", &sad2d_ick),
+ CLK(NULL, "mad2d_ick", &mad2d_ick),
+ CLK(NULL, "mspro_fck", &mspro_fck),
+ CLK(NULL, "dpll2_ck", &dpll2_ck),
+ CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck),
+};
+
+/*
+ * clocks common to omap36xx and omap3430es2plus
+ */
+static struct omap_clk omap36xx_omap3430es2plus_clks[] = {
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2),
+ CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es2),
+ CLK(NULL, "usim_fck", &usim_fck),
+ CLK(NULL, "usim_ick", &usim_ick),
+};
+
+/*
+ * clocks common to am35xx omap36xx and omap3430es2plus
+ */
+static struct omap_clk omap36xx_am35xx_omap3430es2plus_clks[] = {
+ CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck),
+ CLK(NULL, "dpll5_ck", &dpll5_ck),
+ CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck),
+ CLK(NULL, "sgx_fck", &sgx_fck),
+ CLK(NULL, "sgx_ick", &sgx_ick),
+ CLK(NULL, "cpefuse_fck", &cpefuse_fck),
+ CLK(NULL, "ts_fck", &ts_fck),
+ CLK(NULL, "usbtll_fck", &usbtll_fck),
+ CLK("usbhs_omap", "usbtll_fck", &usbtll_fck),
+ CLK("usbhs_tll", "usbtll_fck", &usbtll_fck),
+ CLK(NULL, "usbtll_ick", &usbtll_ick),
+ CLK("usbhs_omap", "usbtll_ick", &usbtll_ick),
+ CLK("usbhs_tll", "usbtll_ick", &usbtll_ick),
+ CLK("omap_hsmmc.2", "ick", &mmchs3_ick),
+ CLK(NULL, "mmchs3_ick", &mmchs3_ick),
+ CLK(NULL, "mmchs3_fck", &mmchs3_fck),
+ CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2),
+ CLK("omapdss_dss", "ick", &dss_ick_3430es2),
+ CLK(NULL, "dss_ick", &dss_ick_3430es2),
+ CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck),
+ CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck),
+ CLK(NULL, "usbhost_ick", &usbhost_ick),
+ CLK("usbhs_omap", "usbhost_ick", &usbhost_ick),
+};
+
+/*
+ * common clocks
*/
static struct omap_clk omap3xxx_clks[] = {
- CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX),
- CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX),
- CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX),
- CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX),
- CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_3XXX),
- CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX),
- CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
- CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
- CLK("twl", "fck", &osc_sys_ck, CK_3XXX),
- CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
- CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
- CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
- CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX),
- CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX),
- CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_3XXX),
- CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX),
- CLK(NULL, "dpll2_ck", &dpll2_ck, CK_34XX | CK_36XX),
- CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_34XX | CK_36XX),
- CLK(NULL, "dpll3_ck", &dpll3_ck, CK_3XXX),
- CLK(NULL, "core_ck", &core_ck, CK_3XXX),
- CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_3XXX),
- CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_3XXX),
- CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
- CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX),
- CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
- CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
- CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX),
- CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX),
- CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
- CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
- CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX),
- CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX),
- CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX),
- CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_3XXX),
- CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_3XXX),
- CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_3XXX),
- CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_3XXX),
- CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_3XXX),
- CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_3XXX),
- CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_3XXX),
- CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_3XXX),
- CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_3XXX),
- CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
- CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX),
- CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
- CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
- CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_3XXX),
- CLK(NULL, "sys_clkout2", &sys_clkout2, CK_3XXX),
- CLK(NULL, "corex2_fck", &corex2_fck, CK_3XXX),
- CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX),
- CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX),
- CLK(NULL, "arm_fck", &arm_fck, CK_3XXX),
- CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
- CLK(NULL, "dpll2_fck", &dpll2_fck, CK_34XX | CK_36XX),
- CLK(NULL, "iva2_ck", &iva2_ck, CK_34XX | CK_36XX),
- CLK(NULL, "l3_ick", &l3_ick, CK_3XXX),
- CLK(NULL, "l4_ick", &l4_ick, CK_3XXX),
- CLK(NULL, "rm_ick", &rm_ick, CK_3XXX),
- CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1),
- CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1),
- CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1),
- CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1),
- CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1),
- CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
- CLK(NULL, "modem_fck", &modem_fck, CK_34XX | CK_36XX),
- CLK(NULL, "sad2d_ick", &sad2d_ick, CK_34XX | CK_36XX),
- CLK(NULL, "mad2d_ick", &mad2d_ick, CK_34XX | CK_36XX),
- CLK(NULL, "gpt10_fck", &gpt10_fck, CK_3XXX),
- CLK(NULL, "gpt11_fck", &gpt11_fck, CK_3XXX),
- CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs_tll", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
- CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX),
- CLK(NULL, "mspro_fck", &mspro_fck, CK_34XX | CK_36XX),
- CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_3XXX),
- CLK(NULL, "i2c3_fck", &i2c3_fck, CK_3XXX),
- CLK(NULL, "i2c2_fck", &i2c2_fck, CK_3XXX),
- CLK(NULL, "i2c1_fck", &i2c1_fck, CK_3XXX),
- CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_3XXX),
- CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_3XXX),
- CLK(NULL, "core_48m_fck", &core_48m_fck, CK_3XXX),
- CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_3XXX),
- CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_3XXX),
- CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_3XXX),
- CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_3XXX),
- CLK(NULL, "uart2_fck", &uart2_fck, CK_3XXX),
- CLK(NULL, "uart1_fck", &uart1_fck, CK_3XXX),
- CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
- CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX),
- CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX),
- CLK(NULL, "hdq_fck", &hdq_fck, CK_3XXX),
- CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
- CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX),
- CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
- CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2PLUS | CK_36XX),
- CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX),
- CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
- CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX),
- CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1, CK_3430ES1),
- CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX),
- CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX),
- CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX),
- CLK(NULL, "security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
- CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX),
- CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX),
- CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "mmchs3_ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX),
- CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX),
- CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX),
- CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX),
- CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX),
- CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
- CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_3XXX),
- CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_3XXX),
- CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX),
- CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX),
- CLK(NULL, "hdq_ick", &hdq_ick, CK_3XXX),
- CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX),
- CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX),
- CLK(NULL, "mcspi4_ick", &mcspi4_ick, CK_3XXX),
- CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_3XXX),
- CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_3XXX),
- CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_3XXX),
- CLK("omap_i2c.3", "ick", &i2c3_ick, CK_3XXX),
- CLK("omap_i2c.2", "ick", &i2c2_ick, CK_3XXX),
- CLK("omap_i2c.1", "ick", &i2c1_ick, CK_3XXX),
- CLK(NULL, "i2c3_ick", &i2c3_ick, CK_3XXX),
- CLK(NULL, "i2c2_ick", &i2c2_ick, CK_3XXX),
- CLK(NULL, "i2c1_ick", &i2c1_ick, CK_3XXX),
- CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX),
- CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX),
- CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX),
- CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX),
- CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX),
- CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_3XXX),
- CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_3XXX),
- CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_34XX | CK_36XX),
- CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1),
- CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2PLUS | CK_36XX),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1),
- CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_34XX | CK_36XX),
- CLK(NULL, "aes1_ick", &aes1_ick, CK_34XX | CK_36XX),
- CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX),
- CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX),
- CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX),
- CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
- CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_3XXX),
- CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX),
- CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX),
- CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1),
- CLK(NULL, "dss_ick", &dss_ick_3430es1, CK_3430ES1),
- CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "dss_ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX),
- CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX),
- CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX),
- CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "utmi_p1_gfclk", &dummy_ck, CK_3XXX),
- CLK(NULL, "utmi_p2_gfclk", &dummy_ck, CK_3XXX),
- CLK(NULL, "xclk60mhsp1_ck", &dummy_ck, CK_3XXX),
- CLK(NULL, "xclk60mhsp2_ck", &dummy_ck, CK_3XXX),
- CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX),
- CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
- CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX),
- CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX),
- CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX),
- CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX),
- CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_3XXX),
- CLK(NULL, "wdt2_fck", &wdt2_fck, CK_3XXX),
- CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX),
- CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX),
- CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX),
- CLK(NULL, "wdt2_ick", &wdt2_ick, CK_3XXX),
- CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX),
- CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX),
- CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
- CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX),
- CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX),
- CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX),
- CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
- CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
- CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX),
- CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_AM35XX),
- CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX),
- CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX),
- CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX),
- CLK(NULL, "gpt5_fck", &gpt5_fck, CK_3XXX),
- CLK(NULL, "gpt6_fck", &gpt6_fck, CK_3XXX),
- CLK(NULL, "gpt7_fck", &gpt7_fck, CK_3XXX),
- CLK(NULL, "gpt8_fck", &gpt8_fck, CK_3XXX),
- CLK(NULL, "gpt9_fck", &gpt9_fck, CK_3XXX),
- CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_3XXX),
- CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_3XXX),
- CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_3XXX),
- CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_3XXX),
- CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_3XXX),
- CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_3XXX),
- CLK(NULL, "wdt3_fck", &wdt3_fck, CK_3XXX),
- CLK(NULL, "per_l4_ick", &per_l4_ick, CK_3XXX),
- CLK(NULL, "gpio6_ick", &gpio6_ick, CK_3XXX),
- CLK(NULL, "gpio5_ick", &gpio5_ick, CK_3XXX),
- CLK(NULL, "gpio4_ick", &gpio4_ick, CK_3XXX),
- CLK(NULL, "gpio3_ick", &gpio3_ick, CK_3XXX),
- CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX),
- CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX),
- CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX),
- CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX),
- CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX),
- CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX),
- CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX),
- CLK(NULL, "gpt6_ick", &gpt6_ick, CK_3XXX),
- CLK(NULL, "gpt5_ick", &gpt5_ick, CK_3XXX),
- CLK(NULL, "gpt4_ick", &gpt4_ick, CK_3XXX),
- CLK(NULL, "gpt3_ick", &gpt3_ick, CK_3XXX),
- CLK(NULL, "gpt2_ick", &gpt2_ick, CK_3XXX),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX),
- CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX),
- CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX),
- CLK(NULL, "mcbsp4_ick", &mcbsp2_ick, CK_3XXX),
- CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_3XXX),
- CLK(NULL, "mcbsp2_ick", &mcbsp4_ick, CK_3XXX),
- CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX),
- CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX),
- CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX),
- CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX),
- CLK(NULL, "emu_src_ck", &emu_src_ck, CK_3XXX),
- CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX),
- CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX),
- CLK(NULL, "atclk_fck", &atclk_fck, CK_3XXX),
- CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_3XXX),
- CLK(NULL, "traceclk_fck", &traceclk_fck, CK_3XXX),
- CLK(NULL, "sr1_fck", &sr1_fck, CK_34XX | CK_36XX),
- CLK(NULL, "sr2_fck", &sr2_fck, CK_34XX | CK_36XX),
- CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_34XX | CK_36XX),
- CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX),
- CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX),
- CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX),
- CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
- CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
- CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
- CLK(NULL, "emac_ick", &emac_ick, CK_AM35XX),
- CLK(NULL, "emac_fck", &emac_fck, CK_AM35XX),
- CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX),
- CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX),
- CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
- CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
- CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX),
- CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX),
- CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
- CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
- CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX),
- CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX),
- CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX),
+ CLK(NULL, "apb_pclk", &dummy_apb_pclk),
+ CLK(NULL, "omap_32k_fck", &omap_32k_fck),
+ CLK(NULL, "virt_12m_ck", &virt_12m_ck),
+ CLK(NULL, "virt_13m_ck", &virt_13m_ck),
+ CLK(NULL, "virt_19200000_ck", &virt_19200000_ck),
+ CLK(NULL, "virt_26000000_ck", &virt_26000000_ck),
+ CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck),
+ CLK(NULL, "osc_sys_ck", &osc_sys_ck),
+ CLK("twl", "fck", &osc_sys_ck),
+ CLK(NULL, "sys_ck", &sys_ck),
+ CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck),
+ CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck),
+ CLK(NULL, "sys_altclk", &sys_altclk),
+ CLK(NULL, "mcbsp_clks", &mcbsp_clks),
+ CLK(NULL, "sys_clkout1", &sys_clkout1),
+ CLK(NULL, "dpll1_ck", &dpll1_ck),
+ CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck),
+ CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck),
+ CLK(NULL, "dpll3_ck", &dpll3_ck),
+ CLK(NULL, "core_ck", &core_ck),
+ CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck),
+ CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck),
+ CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck),
+ CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck),
+ CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck),
+ CLK(NULL, "dpll4_ck", &dpll4_ck),
+ CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck),
+ CLK(NULL, "omap_96m_fck", &omap_96m_fck),
+ CLK(NULL, "cm_96m_fck", &cm_96m_fck),
+ CLK(NULL, "omap_54m_fck", &omap_54m_fck),
+ CLK(NULL, "omap_48m_fck", &omap_48m_fck),
+ CLK(NULL, "omap_12m_fck", &omap_12m_fck),
+ CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck),
+ CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck),
+ CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck),
+ CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck),
+ CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck),
+ CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck),
+ CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck),
+ CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck),
+ CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck),
+ CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck),
+ CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck),
+ CLK(NULL, "clkout2_src_ck", &clkout2_src_ck),
+ CLK(NULL, "sys_clkout2", &sys_clkout2),
+ CLK(NULL, "corex2_fck", &corex2_fck),
+ CLK(NULL, "dpll1_fck", &dpll1_fck),
+ CLK(NULL, "mpu_ck", &mpu_ck),
+ CLK(NULL, "arm_fck", &arm_fck),
+ CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck),
+ CLK(NULL, "l3_ick", &l3_ick),
+ CLK(NULL, "l4_ick", &l4_ick),
+ CLK(NULL, "rm_ick", &rm_ick),
+ CLK(NULL, "gpt10_fck", &gpt10_fck),
+ CLK(NULL, "gpt11_fck", &gpt11_fck),
+ CLK(NULL, "core_96m_fck", &core_96m_fck),
+ CLK(NULL, "mmchs2_fck", &mmchs2_fck),
+ CLK(NULL, "mmchs1_fck", &mmchs1_fck),
+ CLK(NULL, "i2c3_fck", &i2c3_fck),
+ CLK(NULL, "i2c2_fck", &i2c2_fck),
+ CLK(NULL, "i2c1_fck", &i2c1_fck),
+ CLK(NULL, "mcbsp5_fck", &mcbsp5_fck),
+ CLK(NULL, "mcbsp1_fck", &mcbsp1_fck),
+ CLK(NULL, "core_48m_fck", &core_48m_fck),
+ CLK(NULL, "mcspi4_fck", &mcspi4_fck),
+ CLK(NULL, "mcspi3_fck", &mcspi3_fck),
+ CLK(NULL, "mcspi2_fck", &mcspi2_fck),
+ CLK(NULL, "mcspi1_fck", &mcspi1_fck),
+ CLK(NULL, "uart2_fck", &uart2_fck),
+ CLK(NULL, "uart1_fck", &uart1_fck),
+ CLK(NULL, "core_12m_fck", &core_12m_fck),
+ CLK("omap_hdq.0", "fck", &hdq_fck),
+ CLK(NULL, "hdq_fck", &hdq_fck),
+ CLK(NULL, "core_l3_ick", &core_l3_ick),
+ CLK(NULL, "sdrc_ick", &sdrc_ick),
+ CLK(NULL, "gpmc_fck", &gpmc_fck),
+ CLK(NULL, "core_l4_ick", &core_l4_ick),
+ CLK("omap_hsmmc.1", "ick", &mmchs2_ick),
+ CLK("omap_hsmmc.0", "ick", &mmchs1_ick),
+ CLK(NULL, "mmchs2_ick", &mmchs2_ick),
+ CLK(NULL, "mmchs1_ick", &mmchs1_ick),
+ CLK("omap_hdq.0", "ick", &hdq_ick),
+ CLK(NULL, "hdq_ick", &hdq_ick),
+ CLK("omap2_mcspi.4", "ick", &mcspi4_ick),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick),
+ CLK(NULL, "mcspi4_ick", &mcspi4_ick),
+ CLK(NULL, "mcspi3_ick", &mcspi3_ick),
+ CLK(NULL, "mcspi2_ick", &mcspi2_ick),
+ CLK(NULL, "mcspi1_ick", &mcspi1_ick),
+ CLK("omap_i2c.3", "ick", &i2c3_ick),
+ CLK("omap_i2c.2", "ick", &i2c2_ick),
+ CLK("omap_i2c.1", "ick", &i2c1_ick),
+ CLK(NULL, "i2c3_ick", &i2c3_ick),
+ CLK(NULL, "i2c2_ick", &i2c2_ick),
+ CLK(NULL, "i2c1_ick", &i2c1_ick),
+ CLK(NULL, "uart2_ick", &uart2_ick),
+ CLK(NULL, "uart1_ick", &uart1_ick),
+ CLK(NULL, "gpt11_ick", &gpt11_ick),
+ CLK(NULL, "gpt10_ick", &gpt10_ick),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick),
+ CLK(NULL, "mcbsp5_ick", &mcbsp5_ick),
+ CLK(NULL, "mcbsp1_ick", &mcbsp1_ick),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick),
+ CLK(NULL, "dss_tv_fck", &dss_tv_fck),
+ CLK(NULL, "dss_96m_fck", &dss_96m_fck),
+ CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck),
+ CLK(NULL, "utmi_p1_gfclk", &dummy_ck),
+ CLK(NULL, "utmi_p2_gfclk", &dummy_ck),
+ CLK(NULL, "xclk60mhsp1_ck", &dummy_ck),
+ CLK(NULL, "xclk60mhsp2_ck", &dummy_ck),
+ CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck),
+ CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck),
+ CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck),
+ CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck),
+ CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck),
+ CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck),
+ CLK(NULL, "init_60m_fclk", &dummy_ck),
+ CLK(NULL, "gpt1_fck", &gpt1_fck),
+ CLK(NULL, "wkup_32k_fck", &wkup_32k_fck),
+ CLK(NULL, "gpio1_dbck", &gpio1_dbck),
+ CLK(NULL, "wdt2_fck", &wdt2_fck),
+ CLK("omap_wdt", "ick", &wdt2_ick),
+ CLK(NULL, "wdt2_ick", &wdt2_ick),
+ CLK(NULL, "wdt1_ick", &wdt1_ick),
+ CLK(NULL, "gpio1_ick", &gpio1_ick),
+ CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick),
+ CLK(NULL, "gpt12_ick", &gpt12_ick),
+ CLK(NULL, "gpt1_ick", &gpt1_ick),
+ CLK(NULL, "per_96m_fck", &per_96m_fck),
+ CLK(NULL, "per_48m_fck", &per_48m_fck),
+ CLK(NULL, "uart3_fck", &uart3_fck),
+ CLK(NULL, "gpt2_fck", &gpt2_fck),
+ CLK(NULL, "gpt3_fck", &gpt3_fck),
+ CLK(NULL, "gpt4_fck", &gpt4_fck),
+ CLK(NULL, "gpt5_fck", &gpt5_fck),
+ CLK(NULL, "gpt6_fck", &gpt6_fck),
+ CLK(NULL, "gpt7_fck", &gpt7_fck),
+ CLK(NULL, "gpt8_fck", &gpt8_fck),
+ CLK(NULL, "gpt9_fck", &gpt9_fck),
+ CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck),
+ CLK(NULL, "gpio6_dbck", &gpio6_dbck),
+ CLK(NULL, "gpio5_dbck", &gpio5_dbck),
+ CLK(NULL, "gpio4_dbck", &gpio4_dbck),
+ CLK(NULL, "gpio3_dbck", &gpio3_dbck),
+ CLK(NULL, "gpio2_dbck", &gpio2_dbck),
+ CLK(NULL, "wdt3_fck", &wdt3_fck),
+ CLK(NULL, "per_l4_ick", &per_l4_ick),
+ CLK(NULL, "gpio6_ick", &gpio6_ick),
+ CLK(NULL, "gpio5_ick", &gpio5_ick),
+ CLK(NULL, "gpio4_ick", &gpio4_ick),
+ CLK(NULL, "gpio3_ick", &gpio3_ick),
+ CLK(NULL, "gpio2_ick", &gpio2_ick),
+ CLK(NULL, "wdt3_ick", &wdt3_ick),
+ CLK(NULL, "uart3_ick", &uart3_ick),
+ CLK(NULL, "uart4_ick", &uart4_ick),
+ CLK(NULL, "gpt9_ick", &gpt9_ick),
+ CLK(NULL, "gpt8_ick", &gpt8_ick),
+ CLK(NULL, "gpt7_ick", &gpt7_ick),
+ CLK(NULL, "gpt6_ick", &gpt6_ick),
+ CLK(NULL, "gpt5_ick", &gpt5_ick),
+ CLK(NULL, "gpt4_ick", &gpt4_ick),
+ CLK(NULL, "gpt3_ick", &gpt3_ick),
+ CLK(NULL, "gpt2_ick", &gpt2_ick),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick),
+ CLK(NULL, "mcbsp4_ick", &mcbsp2_ick),
+ CLK(NULL, "mcbsp3_ick", &mcbsp3_ick),
+ CLK(NULL, "mcbsp2_ick", &mcbsp4_ick),
+ CLK(NULL, "mcbsp2_fck", &mcbsp2_fck),
+ CLK(NULL, "mcbsp3_fck", &mcbsp3_fck),
+ CLK(NULL, "mcbsp4_fck", &mcbsp4_fck),
+ CLK("etb", "emu_src_ck", &emu_src_ck),
+ CLK(NULL, "emu_src_ck", &emu_src_ck),
+ CLK(NULL, "pclk_fck", &pclk_fck),
+ CLK(NULL, "pclkx2_fck", &pclkx2_fck),
+ CLK(NULL, "atclk_fck", &atclk_fck),
+ CLK(NULL, "traceclk_src_fck", &traceclk_src_fck),
+ CLK(NULL, "traceclk_fck", &traceclk_fck),
+ CLK(NULL, "secure_32k_fck", &secure_32k_fck),
+ CLK(NULL, "gpt12_fck", &gpt12_fck),
+ CLK(NULL, "wdt1_fck", &wdt1_fck),
+ CLK(NULL, "timer_32k_ck", &omap_32k_fck),
+ CLK(NULL, "timer_sys_ck", &sys_ck),
+ CLK(NULL, "cpufreq_ck", &dpll1_ck),
};
static const char *enable_init_clks[] = {
int __init omap3xxx_clk_init(void)
{
- struct omap_clk *c;
- u32 cpu_clkflg = 0;
+ if (omap3_has_192mhz_clk())
+ omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
+
+ if (cpu_is_omap3630()) {
+ dpll3_m3x2_ck = dpll3_m3x2_ck_3630;
+ dpll4_m2x2_ck = dpll4_m2x2_ck_3630;
+ dpll4_m3x2_ck = dpll4_m3x2_ck_3630;
+ dpll4_m4x2_ck = dpll4_m4x2_ck_3630;
+ dpll4_m5x2_ck = dpll4_m5x2_ck_3630;
+ dpll4_m6x2_ck = dpll4_m6x2_ck_3630;
+ }
+
+ /*
+ * XXX This type of dynamic rewriting of the clock tree is
+ * deprecated and should be revised soon.
+ */
+ if (cpu_is_omap3630())
+ dpll4_dd = dpll4_dd_3630;
+ else
+ dpll4_dd = dpll4_dd_34xx;
+
/*
* 3505 must be tested before 3517, since 3517 returns true
*/
if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
- cpu_clkflg = CK_AM35XX;
+ omap_clocks_register(am35xx_clks, ARRAY_SIZE(am35xx_clks));
+ omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks,
+ ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks));
+ omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks));
} else if (cpu_is_omap3630()) {
cpu_mask = (RATE_IN_34XX | RATE_IN_36XX);
- cpu_clkflg = CK_36XX;
- } else if (cpu_is_ti816x()) {
- cpu_mask = RATE_IN_TI816X;
- cpu_clkflg = CK_TI816X;
+ omap_clocks_register(omap36xx_clks, ARRAY_SIZE(omap36xx_clks));
+ omap_clocks_register(omap36xx_omap3430es2plus_clks,
+ ARRAY_SIZE(omap36xx_omap3430es2plus_clks));
+ omap_clocks_register(omap34xx_omap36xx_clks,
+ ARRAY_SIZE(omap34xx_omap36xx_clks));
+ omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks,
+ ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks));
+ omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks));
} else if (soc_is_am33xx()) {
cpu_mask = RATE_IN_AM33XX;
} else if (cpu_is_ti814x()) {
} else if (cpu_is_omap34xx()) {
if (omap_rev() == OMAP3430_REV_ES1_0) {
cpu_mask = RATE_IN_3430ES1;
- cpu_clkflg = CK_3430ES1;
+ omap_clocks_register(omap3430es1_clks,
+ ARRAY_SIZE(omap3430es1_clks));
+ omap_clocks_register(omap34xx_omap36xx_clks,
+ ARRAY_SIZE(omap34xx_omap36xx_clks));
+ omap_clocks_register(omap3xxx_clks,
+ ARRAY_SIZE(omap3xxx_clks));
} else {
/*
* Assume that anything that we haven't matched yet
* has 3430ES2-type clocks.
*/
cpu_mask = RATE_IN_3430ES2PLUS;
- cpu_clkflg = CK_3430ES2PLUS;
+ omap_clocks_register(omap34xx_omap36xx_clks,
+ ARRAY_SIZE(omap34xx_omap36xx_clks));
+ omap_clocks_register(omap36xx_omap3430es2plus_clks,
+ ARRAY_SIZE(omap36xx_omap3430es2plus_clks));
+ omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks,
+ ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks));
+ omap_clocks_register(omap3xxx_clks,
+ ARRAY_SIZE(omap3xxx_clks));
}
} else {
WARN(1, "clock: could not identify OMAP3 variant\n");
}
- if (omap3_has_192mhz_clk())
- omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
-
- if (cpu_is_omap3630()) {
- dpll3_m3x2_ck = dpll3_m3x2_ck_3630;
- dpll4_m2x2_ck = dpll4_m2x2_ck_3630;
- dpll4_m3x2_ck = dpll4_m3x2_ck_3630;
- dpll4_m4x2_ck = dpll4_m4x2_ck_3630;
- dpll4_m5x2_ck = dpll4_m5x2_ck_3630;
- dpll4_m6x2_ck = dpll4_m6x2_ck_3630;
- }
-
- /*
- * XXX This type of dynamic rewriting of the clock tree is
- * deprecated and should be revised soon.
- */
- if (cpu_is_omap3630())
- dpll4_dd = dpll4_dd_3630;
- else
- dpll4_dd = dpll4_dd_34xx;
-
- for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
- c++)
- if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
- if (!__clk_init(NULL, c->lk.clk))
- omap2_init_clk_hw_omap_clocks(c->lk.clk);
- }
-
- omap2_clk_disable_autoidle_all();
+ omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,
ARRAY_SIZE(enable_init_clks));
0x0, NULL);
/*
- * clkdev
+ * clocks specific to omap4460
*/
+static struct omap_clk omap446x_clks[] = {
+ CLK(NULL, "div_ts_ck", &div_ts_ck),
+ CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk),
+};
+
+/*
+ * clocks specific to omap4430
+ */
+static struct omap_clk omap443x_clks[] = {
+ CLK(NULL, "bandgap_fclk", &bandgap_fclk),
+};
+/*
+ * clocks common to omap44xx
+ */
static struct omap_clk omap44xx_clks[] = {
- CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck, CK_443X),
- CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck, CK_443X),
- CLK(NULL, "pad_clks_ck", &pad_clks_ck, CK_443X),
- CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck, CK_443X),
- CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck, CK_443X),
- CLK(NULL, "slimbus_src_clk", &slimbus_src_clk, CK_443X),
- CLK(NULL, "slimbus_clk", &slimbus_clk, CK_443X),
- CLK(NULL, "sys_32k_ck", &sys_32k_ck, CK_443X),
- CLK(NULL, "virt_12000000_ck", &virt_12000000_ck, CK_443X),
- CLK(NULL, "virt_13000000_ck", &virt_13000000_ck, CK_443X),
- CLK(NULL, "virt_16800000_ck", &virt_16800000_ck, CK_443X),
- CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_443X),
- CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_443X),
- CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X),
- CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X),
- CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X),
- CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck, CK_443X),
- CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X),
- CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X),
- CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X),
- CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X),
- CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck, CK_443X),
- CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X),
- CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X),
- CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck, CK_443X),
- CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X),
- CLK(NULL, "abe_24m_fclk", &abe_24m_fclk, CK_443X),
- CLK(NULL, "abe_clk", &abe_clk, CK_443X),
- CLK(NULL, "aess_fclk", &aess_fclk, CK_443X),
- CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck, CK_443X),
- CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck, CK_443X),
- CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_443X),
- CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_443X),
- CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck, CK_443X),
- CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck, CK_443X),
- CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck, CK_443X),
- CLK(NULL, "ddrphy_ck", &ddrphy_ck, CK_443X),
- CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, CK_443X),
- CLK(NULL, "div_core_ck", &div_core_ck, CK_443X),
- CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk, CK_443X),
- CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk, CK_443X),
- CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck, CK_443X),
- CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck, CK_443X),
- CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck, CK_443X),
- CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck, CK_443X),
- CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck, CK_443X),
- CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck, CK_443X),
- CLK(NULL, "dpll_iva_ck", &dpll_iva_ck, CK_443X),
- CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck, CK_443X),
- CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck, CK_443X),
- CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, CK_443X),
- CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_443X),
- CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_443X),
- CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck, CK_443X),
- CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck, CK_443X),
- CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_443X),
- CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_443X),
- CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck, CK_443X),
- CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, CK_443X),
- CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck, CK_443X),
- CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, CK_443X),
- CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, CK_443X),
- CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck, CK_443X),
- CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck, CK_443X),
- CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X),
- CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X),
- CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X),
- CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck, CK_443X),
- CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck, CK_443X),
- CLK(NULL, "func_12m_fclk", &func_12m_fclk, CK_443X),
- CLK(NULL, "func_24m_clk", &func_24m_clk, CK_443X),
- CLK(NULL, "func_24mc_fclk", &func_24mc_fclk, CK_443X),
- CLK(NULL, "func_48m_fclk", &func_48m_fclk, CK_443X),
- CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X),
- CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X),
- CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X),
- CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X),
- CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X),
- CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X),
- CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X),
- CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X),
- CLK("smp_twd", NULL, &mpu_periphclk, CK_443X),
- CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X),
- CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X),
- CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X),
- CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X),
- CLK(NULL, "aes1_fck", &aes1_fck, CK_443X),
- CLK(NULL, "aes2_fck", &aes2_fck, CK_443X),
- CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X),
- CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X),
- CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X),
- CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X),
- CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk, CK_443X),
- CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X),
- CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X),
- CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X),
- CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X),
- CLK(NULL, "dss_fck", &dss_fck, CK_443X),
- CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
- CLK(NULL, "fdif_fck", &fdif_fck, CK_443X),
- CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_443X),
- CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_443X),
- CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_443X),
- CLK(NULL, "gpio4_dbclk", &gpio4_dbclk, CK_443X),
- CLK(NULL, "gpio5_dbclk", &gpio5_dbclk, CK_443X),
- CLK(NULL, "gpio6_dbclk", &gpio6_dbclk, CK_443X),
- CLK(NULL, "sgx_clk_mux", &sgx_clk_mux, CK_443X),
- CLK(NULL, "hsi_fck", &hsi_fck, CK_443X),
- CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X),
- CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X),
- CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk, CK_443X),
- CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X),
- CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk, CK_443X),
- CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X),
- CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk, CK_443X),
- CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X),
- CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk, CK_443X),
- CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X),
- CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
- CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
- CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
- CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
- CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
- CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
- CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2, CK_443X),
- CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk, CK_443X),
- CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1, CK_443X),
- CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0, CK_443X),
- CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk, CK_443X),
- CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X),
- CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X),
- CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X),
- CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux, CK_443X),
- CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux, CK_443X),
- CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux, CK_443X),
- CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux, CK_443X),
- CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux, CK_443X),
- CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux, CK_443X),
- CLK(NULL, "timer5_sync_mux", &timer5_sync_mux, CK_443X),
- CLK(NULL, "timer6_sync_mux", &timer6_sync_mux, CK_443X),
- CLK(NULL, "timer7_sync_mux", &timer7_sync_mux, CK_443X),
- CLK(NULL, "timer8_sync_mux", &timer8_sync_mux, CK_443X),
- CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux, CK_443X),
- CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X),
- CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X),
- CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X),
- CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X),
- CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X),
- CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk, CK_443X),
- CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk, CK_443X),
- CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk, CK_443X),
- CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk, CK_443X),
- CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X),
- CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X),
- CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X),
- CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X),
- CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X),
- CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X),
- CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X),
- CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick, CK_443X),
- CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X),
- CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X),
- CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X),
- CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X),
- CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X),
- CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X),
- CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
- CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
- CLK(NULL, "usim_ck", &usim_ck, CK_443X),
- CLK(NULL, "usim_fclk", &usim_fclk, CK_443X),
- CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X),
- CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X),
- CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X),
- CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X),
- CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck, CK_443X),
- CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X),
- CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck, CK_443X),
- CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck, CK_443X),
- CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X),
- CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck, CK_443X),
- CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck, CK_443X),
- CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X),
- CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck, CK_443X),
- CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck, CK_443X),
- CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X),
- CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck, CK_443X),
- CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck, CK_443X),
- CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X),
- CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck, CK_443X),
- CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X),
- CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X),
- CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X),
- CLK("omap-gpmc", "fck", &dummy_ck, CK_443X),
- CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X),
- CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X),
- CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X),
- CLK("omap_i2c.4", "ick", &dummy_ck, CK_443X),
- CLK(NULL, "mailboxes_ick", &dummy_ck, CK_443X),
- CLK("omap_hsmmc.0", "ick", &dummy_ck, CK_443X),
- CLK("omap_hsmmc.1", "ick", &dummy_ck, CK_443X),
- CLK("omap_hsmmc.2", "ick", &dummy_ck, CK_443X),
- CLK("omap_hsmmc.3", "ick", &dummy_ck, CK_443X),
- CLK("omap_hsmmc.4", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X),
- CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X),
- CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X),
- CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X),
- CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X),
- CLK(NULL, "uart1_ick", &dummy_ck, CK_443X),
- CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
- CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),
- CLK(NULL, "uart4_ick", &dummy_ck, CK_443X),
- CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X),
- CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X),
- CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X),
- CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
- CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X),
+ CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck),
+ CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck),
+ CLK(NULL, "pad_clks_ck", &pad_clks_ck),
+ CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck),
+ CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck),
+ CLK(NULL, "slimbus_src_clk", &slimbus_src_clk),
+ CLK(NULL, "slimbus_clk", &slimbus_clk),
+ CLK(NULL, "sys_32k_ck", &sys_32k_ck),
+ CLK(NULL, "virt_12000000_ck", &virt_12000000_ck),
+ CLK(NULL, "virt_13000000_ck", &virt_13000000_ck),
+ CLK(NULL, "virt_16800000_ck", &virt_16800000_ck),
+ CLK(NULL, "virt_19200000_ck", &virt_19200000_ck),
+ CLK(NULL, "virt_26000000_ck", &virt_26000000_ck),
+ CLK(NULL, "virt_27000000_ck", &virt_27000000_ck),
+ CLK(NULL, "virt_38400000_ck", &virt_38400000_ck),
+ CLK(NULL, "sys_clkin_ck", &sys_clkin_ck),
+ CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck),
+ CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck),
+ CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck),
+ CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck),
+ CLK(NULL, "xclk60motg_ck", &xclk60motg_ck),
+ CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck),
+ CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck),
+ CLK(NULL, "dpll_abe_ck", &dpll_abe_ck),
+ CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck),
+ CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck),
+ CLK(NULL, "abe_24m_fclk", &abe_24m_fclk),
+ CLK(NULL, "abe_clk", &abe_clk),
+ CLK(NULL, "aess_fclk", &aess_fclk),
+ CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck),
+ CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck),
+ CLK(NULL, "dpll_core_ck", &dpll_core_ck),
+ CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck),
+ CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck),
+ CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck),
+ CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck),
+ CLK(NULL, "ddrphy_ck", &ddrphy_ck),
+ CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck),
+ CLK(NULL, "div_core_ck", &div_core_ck),
+ CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk),
+ CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk),
+ CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck),
+ CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck),
+ CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck),
+ CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck),
+ CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck),
+ CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck),
+ CLK(NULL, "dpll_iva_ck", &dpll_iva_ck),
+ CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck),
+ CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck),
+ CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck),
+ CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck),
+ CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck),
+ CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck),
+ CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck),
+ CLK(NULL, "dpll_per_ck", &dpll_per_ck),
+ CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck),
+ CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck),
+ CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck),
+ CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck),
+ CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck),
+ CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck),
+ CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck),
+ CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck),
+ CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck),
+ CLK(NULL, "dpll_usb_ck", &dpll_usb_ck),
+ CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck),
+ CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck),
+ CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck),
+ CLK(NULL, "func_12m_fclk", &func_12m_fclk),
+ CLK(NULL, "func_24m_clk", &func_24m_clk),
+ CLK(NULL, "func_24mc_fclk", &func_24mc_fclk),
+ CLK(NULL, "func_48m_fclk", &func_48m_fclk),
+ CLK(NULL, "func_48mc_fclk", &func_48mc_fclk),
+ CLK(NULL, "func_64m_fclk", &func_64m_fclk),
+ CLK(NULL, "func_96m_fclk", &func_96m_fclk),
+ CLK(NULL, "init_60m_fclk", &init_60m_fclk),
+ CLK(NULL, "l3_div_ck", &l3_div_ck),
+ CLK(NULL, "l4_div_ck", &l4_div_ck),
+ CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck),
+ CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck),
+ CLK("smp_twd", NULL, &mpu_periphclk),
+ CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk),
+ CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk),
+ CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk),
+ CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck),
+ CLK(NULL, "aes1_fck", &aes1_fck),
+ CLK(NULL, "aes2_fck", &aes2_fck),
+ CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck),
+ CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk),
+ CLK(NULL, "dss_sys_clk", &dss_sys_clk),
+ CLK(NULL, "dss_tv_clk", &dss_tv_clk),
+ CLK(NULL, "dss_dss_clk", &dss_dss_clk),
+ CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk),
+ CLK(NULL, "dss_fck", &dss_fck),
+ CLK("omapdss_dss", "ick", &dss_fck),
+ CLK(NULL, "fdif_fck", &fdif_fck),
+ CLK(NULL, "gpio1_dbclk", &gpio1_dbclk),
+ CLK(NULL, "gpio2_dbclk", &gpio2_dbclk),
+ CLK(NULL, "gpio3_dbclk", &gpio3_dbclk),
+ CLK(NULL, "gpio4_dbclk", &gpio4_dbclk),
+ CLK(NULL, "gpio5_dbclk", &gpio5_dbclk),
+ CLK(NULL, "gpio6_dbclk", &gpio6_dbclk),
+ CLK(NULL, "sgx_clk_mux", &sgx_clk_mux),
+ CLK(NULL, "hsi_fck", &hsi_fck),
+ CLK(NULL, "iss_ctrlclk", &iss_ctrlclk),
+ CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck),
+ CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk),
+ CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck),
+ CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk),
+ CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck),
+ CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk),
+ CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck),
+ CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk),
+ CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck),
+ CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk),
+ CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk),
+ CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk),
+ CLK(NULL, "sha2md5_fck", &sha2md5_fck),
+ CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1),
+ CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0),
+ CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2),
+ CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk),
+ CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1),
+ CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0),
+ CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk),
+ CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck),
+ CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck),
+ CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck),
+ CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux),
+ CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux),
+ CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux),
+ CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux),
+ CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux),
+ CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux),
+ CLK(NULL, "timer5_sync_mux", &timer5_sync_mux),
+ CLK(NULL, "timer6_sync_mux", &timer6_sync_mux),
+ CLK(NULL, "timer7_sync_mux", &timer7_sync_mux),
+ CLK(NULL, "timer8_sync_mux", &timer8_sync_mux),
+ CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux),
+ CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck),
+ CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck),
+ CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk),
+ CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk),
+ CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk),
+ CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk),
+ CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk),
+ CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk),
+ CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk),
+ CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk),
+ CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk),
+ CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk),
+ CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck),
+ CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck),
+ CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk),
+ CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk),
+ CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick),
+ CLK("musb-omap2430", "ick", &usb_otg_hs_ick),
+ CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k),
+ CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk),
+ CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk),
+ CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk),
+ CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick),
+ CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick),
+ CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick),
+ CLK(NULL, "usim_ck", &usim_ck),
+ CLK(NULL, "usim_fclk", &usim_fclk),
+ CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck),
+ CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck),
+ CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck),
+ CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck),
+ CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck),
+ CLK(NULL, "auxclk0_ck", &auxclk0_ck),
+ CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck),
+ CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck),
+ CLK(NULL, "auxclk1_ck", &auxclk1_ck),
+ CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck),
+ CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck),
+ CLK(NULL, "auxclk2_ck", &auxclk2_ck),
+ CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck),
+ CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck),
+ CLK(NULL, "auxclk3_ck", &auxclk3_ck),
+ CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck),
+ CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck),
+ CLK(NULL, "auxclk4_ck", &auxclk4_ck),
+ CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck),
+ CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck),
+ CLK(NULL, "auxclk5_ck", &auxclk5_ck),
+ CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck),
+ CLK("omap-gpmc", "fck", &dummy_ck),
+ CLK("omap_i2c.1", "ick", &dummy_ck),
+ CLK("omap_i2c.2", "ick", &dummy_ck),
+ CLK("omap_i2c.3", "ick", &dummy_ck),
+ CLK("omap_i2c.4", "ick", &dummy_ck),
+ CLK(NULL, "mailboxes_ick", &dummy_ck),
+ CLK("omap_hsmmc.0", "ick", &dummy_ck),
+ CLK("omap_hsmmc.1", "ick", &dummy_ck),
+ CLK("omap_hsmmc.2", "ick", &dummy_ck),
+ CLK("omap_hsmmc.3", "ick", &dummy_ck),
+ CLK("omap_hsmmc.4", "ick", &dummy_ck),
+ CLK("omap-mcbsp.1", "ick", &dummy_ck),
+ CLK("omap-mcbsp.2", "ick", &dummy_ck),
+ CLK("omap-mcbsp.3", "ick", &dummy_ck),
+ CLK("omap-mcbsp.4", "ick", &dummy_ck),
+ CLK("omap2_mcspi.1", "ick", &dummy_ck),
+ CLK("omap2_mcspi.2", "ick", &dummy_ck),
+ CLK("omap2_mcspi.3", "ick", &dummy_ck),
+ CLK("omap2_mcspi.4", "ick", &dummy_ck),
+ CLK(NULL, "uart1_ick", &dummy_ck),
+ CLK(NULL, "uart2_ick", &dummy_ck),
+ CLK(NULL, "uart3_ick", &dummy_ck),
+ CLK(NULL, "uart4_ick", &dummy_ck),
+ CLK("usbhs_omap", "usbhost_ick", &dummy_ck),
+ CLK("usbhs_omap", "usbtll_fck", &dummy_ck),
+ CLK("usbhs_tll", "usbtll_fck", &dummy_ck),
+ CLK("omap_wdt", "ick", &dummy_ck),
+ CLK(NULL, "timer_32k_ck", &sys_32k_ck),
/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
- CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
- CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
+ CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck),
+ CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck),
+ CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck),
+ CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck),
+ CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck),
+ CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck),
+ CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck),
+ CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck),
+ CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck),
+ CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck),
+ CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck),
+ CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck),
+ CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck),
+ CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck),
+ CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck),
+ CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck),
+ CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck),
+ CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck),
+ CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck),
+ CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck),
+ CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck),
+ CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck),
+ CLK(NULL, "cpufreq_ck", &dpll_mpu_ck),
};
int __init omap4xxx_clk_init(void)
{
- u32 cpu_clkflg;
- struct omap_clk *c;
int rc;
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
- cpu_clkflg = CK_443X;
+ omap_clocks_register(omap443x_clks, ARRAY_SIZE(omap443x_clks));
} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
cpu_mask = RATE_IN_4460 | RATE_IN_4430;
- cpu_clkflg = CK_446X | CK_443X;
-
+ omap_clocks_register(omap446x_clks, ARRAY_SIZE(omap446x_clks));
if (cpu_is_omap447x())
pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
} else {
return 0;
}
- for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
- c++) {
- if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
- if (!__clk_init(NULL, c->lk.clk))
- omap2_init_clk_hw_omap_clocks(c->lk.clk);
- }
- }
+ omap_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks));
omap2_clk_disable_autoidle_all();
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
-
+#include <linux/clk-private.h>
#include <asm/cpu.h>
.find_companion = omap2_clk_dflt_find_companion,
};
+/**
+ * omap_clocks_register - register an array of omap_clk
+ * @ocs: pointer to an array of omap_clk to register
+ */
+void __init omap_clocks_register(struct omap_clk oclks[], int cnt)
+{
+ struct omap_clk *c;
+
+ for (c = oclks; c < oclks + cnt; c++) {
+ clkdev_add(&c->lk);
+ if (!__clk_init(NULL, c->lk.clk))
+ omap2_init_clk_hw_omap_clocks(c->lk.clk);
+ }
+}
+
/**
* omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
* @mpurate_ck_name: clk name of the clock to change rate
struct clk_lookup lk;
};
-#define CLK(dev, con, ck, cp) \
+#define CLK(dev, con, ck) \
{ \
- .cpu = cp, \
.lk = { \
.dev_id = dev, \
.con_id = con, \
}, \
}
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_242X (1 << 0)
-#define CK_243X (1 << 1) /* 243x, 253x */
-#define CK_3430ES1 (1 << 2) /* 34xxES1 only */
-#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX (1 << 4) /* Sitara AM35xx */
-#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */
-#define CK_443X (1 << 6)
-#define CK_TI816X (1 << 7)
-#define CK_446X (1 << 8)
-#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */
-
-
-#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
-
struct clockdomain;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+extern void omap_clocks_register(struct omap_clk *oclks, int cnt);
#endif
void omap3630_init_late(void);
void am35xx_init_late(void);
void ti81xx_init_late(void);
-void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
{
struct omap3_idle_statedata *cx = &omap3_idle_data[index];
- local_fiq_disable();
-
if (omap_irq_pending() || need_resched())
goto return_sleep_time;
clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
return_sleep_time:
- local_fiq_enable();
return index;
}
struct cpuidle_driver *drv,
int index)
{
- local_fiq_disable();
omap_do_wfi();
- local_fiq_enable();
-
return index;
}
struct omap4_idle_statedata *cx = &omap4_idle_data[index];
int cpu_id = smp_processor_id();
- local_fiq_disable();
-
/*
* CPU0 has to wait and stay ON until CPU1 is OFF state.
* This is necessary to honour hardware recommondation
/* Wakeup CPU1 only if it is not offlined */
if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
clkdm_wakeup(cpu_clkdm[1]);
+ omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
clkdm_allow_idle(cpu_clkdm[1]);
}
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
cpu_done[dev->cpu] = false;
- local_fiq_enable();
-
return index;
}
/* DMA channels for 24xx */
#define OMAP24XX_DMA_NO_DEVICE 0
-#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
-#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
-#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
-#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
- /* Now the GPMC is initialised, unreserve the chip-selects */
- gpmc_cs_map = 0;
-
return 0;
}
if (IS_ERR_VALUE(gpmc_setup_irq()))
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
+ /* Now the GPMC is initialised, unreserve the chip-selects */
+ gpmc_cs_map = 0;
+
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);
return -EINVAL;
}
- pr_err("%s: Could not find signal %s\n", __func__, muxname);
-
return -ENODEV;
}
return mux_mode;
}
+ pr_err("%s: Could not find signal %s\n", __func__, muxname);
+
return -ENODEV;
}
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
- (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
- m, &omap_mux_dbg_signal_fops);
+ (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
+ mux_dbg_dir, m,
+ &omap_mux_dbg_signal_fops);
}
}
#include <linux/smp.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
#include "omap-wakeupgen.h"
-
#include "common.h"
-
#include "powerdomain.h"
/*
unsigned int boot_cpu = 0;
void __iomem *base = omap_get_wakeupgen_base();
- flush_cache_all();
- dsb();
-
/*
* we're ready for shutdown now, so do it
*/
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
-#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include "omap-secure.h"
omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
4, 0, 0, 0, 0, 0);
- /*
- * If any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
/*
* Synchronise with the boot thread.
*/
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
+ static struct powerdomain *cpu1_pwrdm;
void __iomem *base = omap_get_wakeupgen_base();
/*
else
__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
- flush_cache_all();
- smp_wmb();
-
- if (!cpu1_clkdm)
+ if (!cpu1_clkdm && !cpu1_pwrdm) {
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
+ cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm");
+ }
/*
* The SGI(Software Generated Interrupts) are not wakeup capable
* Section :
* 4.3.4.2 Power States of CPU0 and CPU1
*/
- if (booted) {
+ if (booted && cpu1_pwrdm && cpu1_clkdm) {
/*
* GIC distributor control register has changed between
* CortexA9 r1pX and r2pX. The Control Register secure
gic_dist_disable();
}
+ /*
+ * Ensure that CPU power state is set to ON to avoid CPU
+ * powerdomain transition on wfi
+ */
clkdm_wakeup(cpu1_clkdm);
+ omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
clkdm_allow_idle(cpu1_clkdm);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
return 0;
}
-static void __init wakeup_secondary(void)
-{
- void *startup_addr = omap_secondary_startup;
- void __iomem *base = omap_get_wakeupgen_base();
-
- if (cpu_is_omap446x()) {
- startup_addr = omap_secondary_startup_4460;
- pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
- }
-
- /*
- * Write the address of secondary startup routine into the
- * AuxCoreBoot1 where ROM code will jump and start executing
- * on secondary core once out of WFE
- * A barrier is added to ensure that write buffer is drained
- */
- if (omap_secure_apis_support())
- omap_auxcoreboot_addr(virt_to_phys(startup_addr));
- else
- __raw_writel(virt_to_phys(omap5_secondary_startup),
- base + OMAP_AUX_CORE_BOOT_1);
-
- smp_wmb();
-
- /*
- * Send a 'sev' to wake the secondary core from WFE.
- * Drain the outstanding writes to memory
- */
- dsb_sev();
- mb();
-}
-
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
+ void *startup_addr = omap_secondary_startup;
+ void __iomem *base = omap_get_wakeupgen_base();
/*
* Initialise the SCU and wake up the secondary core using
*/
if (scu_base)
scu_enable(scu_base);
- wakeup_secondary();
+
+ if (cpu_is_omap446x()) {
+ startup_addr = omap_secondary_startup_4460;
+ pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
+ }
+
+ /*
+ * Write the address of secondary startup routine into the
+ * AuxCoreBoot1 where ROM code will jump and start executing
+ * on secondary core once out of WFE
+ * A barrier is added to ensure that write buffer is drained
+ */
+ if (omap_secure_apis_support())
+ omap_auxcoreboot_addr(virt_to_phys(startup_addr));
+ else
+ __raw_writel(virt_to_phys(omap5_secondary_startup),
+ base + OMAP_AUX_CORE_BOOT_1);
+
}
struct smp_operations omap4_smp_ops __initdata = {
#include <linux/of_platform.h>
#include <linux/export.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
void __init omap_gic_of_init(void)
{
+ struct device_node *np;
+
+ /* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */
+ if (!cpu_is_omap446x())
+ goto skip_errata_init;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
+ gic_dist_base_addr = of_iomap(np, 0);
+ WARN_ON(!gic_dist_base_addr);
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
+ twd_base = of_iomap(np, 0);
+ WARN_ON(!twd_base);
+
+skip_errata_init:
omap_wakeupgen_init();
irqchip_init();
}
#define SAR_BANK4_OFFSET 0x3000
/* Scratch pad memory offsets from SAR_BANK1 */
-#define SCU_OFFSET0 0xd00
-#define SCU_OFFSET1 0xd04
-#define OMAP_TYPE_OFFSET 0xd10
-#define L2X0_SAVE_OFFSET0 0xd14
-#define L2X0_SAVE_OFFSET1 0xd18
-#define L2X0_AUXCTRL_OFFSET 0xd1c
-#define L2X0_PREFETCH_CTRL_OFFSET 0xd20
+#define SCU_OFFSET0 0xfe4
+#define SCU_OFFSET1 0xfe8
+#define OMAP_TYPE_OFFSET 0xfec
+#define L2X0_SAVE_OFFSET0 0xff0
+#define L2X0_SAVE_OFFSET1 0xff4
+#define L2X0_AUXCTRL_OFFSET 0xff8
+#define L2X0_PREFETCH_CTRL_OFFSET 0xffc
/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04
static void omap2_pm_idle(void)
{
- local_fiq_disable();
-
if (!omap2_can_sleep()) {
if (omap_irq_pending())
- goto out;
+ return;
omap2_enter_mpu_retention();
- goto out;
+ return;
}
if (omap_irq_pending())
- goto out;
+ return;
omap2_enter_full_retention();
-
-out:
- local_fiq_enable();
}
static void __init prcm_setup_regs(void)
static void omap3_pm_idle(void)
{
- local_fiq_disable();
-
if (omap_irq_pending())
- goto out;
+ return;
trace_cpu_idle(1, smp_processor_id());
omap_sram_idle();
trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
-
-out:
- local_fiq_enable();
}
#ifdef CONFIG_SUSPEND
pr_err("Memory allocation failed when allocating for secure sram context\n");
local_irq_disable();
- local_fiq_disable();
omap_dma_global_context_save();
omap3_save_secure_ram_context();
omap_dma_global_context_restore();
local_irq_enable();
- local_fiq_enable();
}
omap3_save_scratchpad_contents();
*/
static void omap_default_idle(void)
{
- local_fiq_disable();
-
omap_do_wfi();
-
- local_fiq_enable();
}
/**
int __init omap4_pm_init(void)
{
int ret;
- struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup;
- struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
+ struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
+ struct clockdomain *ducati_clkdm, *l3_2_clkdm;
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
* MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
* expected. The hardware recommendation is to enable static
* dependencies for these to avoid system lock ups or random crashes.
- * The L4 wakeup depedency is added to workaround the OCP sync hardware
- * BUG with 32K synctimer which lead to incorrect timer value read
- * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
- * are part of L4 wakeup clockdomain.
*/
mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
emif_clkdm = clkdm_lookup("l3_emif_clkdm");
l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
- l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
- l4wkup = clkdm_lookup("l4_wkup_clkdm");
ducati_clkdm = clkdm_lookup("ducati_clkdm");
- if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) ||
- (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
+ if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
+ (!l3_2_clkdm) || (!ducati_clkdm))
goto err2;
ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
- ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
- ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup);
ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
if (ret) {
int err;
if (of_have_populated_dt()) {
- twd_local_timer_of_register();
+ clocksource_of_init();
return;
}
orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7);
}
-static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
+static void __init orion5x_setup_pci_wins(void)
{
+ const struct mbus_dram_target_info *dram = mv_mbus_dram_info();
u32 win_enable;
int bus;
int i;
bus = orion5x_pci_local_bus_nr();
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
u32 reg;
u32 val;
/*
* Point PCI unit MBUS decode windows to DRAM space.
*/
- orion5x_setup_pci_wins(&orion_mbus_dram_info);
+ orion5x_setup_pci_wins();
/*
* Master + Slave enable
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/smp_plat.h>
static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
+ .ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {
config CPU_S3C2412
bool "SAMSUNG S3C2412"
- depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
config CPU_S3C2416
bool "SAMSUNG S3C2416/S3C2450"
- depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2416_PM if PM
config CPU_S3C2443
bool "SAMSUNG S3C2443"
- depends on ARCH_S3C24XX
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select S3C2443_COMMON
config S3C24XX_DMA
bool "S3C2410 DMA support"
- depends on ARCH_S3C24XX
select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
config S3C2410_DMA_DEBUG
bool "S3C2410 DMA support debug"
- depends on ARCH_S3C24XX && S3C2410_DMA
+ depends on S3C2410_DMA
help
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
config S3C2410_CPUFREQ
bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+ depends on CPU_FREQ_S3C24XX
select S3C2410_CPUFREQ_UTILS
help
CPU Frequency scaling support for S3C2410
config MACH_N30
bool "Acer N30 family"
- select MACH_N35
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
config CPU_S3C2412_ONLY
bool
- depends on ARCH_S3C24XX && !CPU_S3C2410 && \
- !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
- !CPU_S3C2443 && CPU_S3C2412
+ depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
+ !CPU_S3C2442 && !CPU_S3C2443
default y
config S3C2412_CPUFREQ
bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ depends on CPU_FREQ_S3C24XX
default y
select S3C2412_IOTIMING
help
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
select I2C
- select MACH_NEO1973
select MFD_PCF50633
select PCF50633_GPIO
select POWER_SUPPLY
help
Say Y here if you're using HP iPAQ rx1950
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
-
-endif # CPU_S3C2440
+endif # CPU_S3C2442
if CPU_S3C2443 || CPU_S3C2416
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-#include <plat/irq.h>
-
#include "bast.h"
#define irqdbf(x...)
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <linux/init.h>
#include <linux/clk.h>
-#include <plat/s3c2416.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/pm.h>
+#include "common-smdk.h"
+
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
--- /dev/null
+/*
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void smdk_machine_init(void);
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/s3c2416.h>
-#include <plat/s3c244x.h>
-#include <plat/s3c2443.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
+#include "common.h"
+
/* table of supported CPUs */
static const char name_s3c2410[] = "S3C2410";
#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-void s3c2410_restart(char mode, const char *cmd);
-void s3c244x_restart(char mode, const char *cmd);
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_restart(char mode, const char *cmd);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern int s3c2412_baseclk_add(void);
+extern void s3c2412_restart(char mode, const char *cmd);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c244x_init_clocks(int xtal);
+extern void s3c244x_restart(char mode, const char *cmd);
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
extern struct syscore_ops s3c24xx_irq_syscore_ops;
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
*/
enum dma_ch {
- DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_XD0 = 0,
DMACH_XD1,
DMACH_SDI,
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON (0x00)
-#define S3C2410_SDIPRE (0x04)
-#define S3C2410_SDICMDARG (0x08)
-#define S3C2410_SDICMDCON (0x0C)
-#define S3C2410_SDICMDSTAT (0x10)
-#define S3C2410_SDIRSP0 (0x14)
-#define S3C2410_SDIRSP1 (0x18)
-#define S3C2410_SDIRSP2 (0x1C)
-#define S3C2410_SDIRSP3 (0x20)
-#define S3C2410_SDITIMER (0x24)
-#define S3C2410_SDIBSIZE (0x28)
-#define S3C2410_SDIDCON (0x2C)
-#define S3C2410_SDIDCNT (0x30)
-#define S3C2410_SDIDSTA (0x34)
-#define S3C2410_SDIFSTA (0x38)
-
-#define S3C2410_SDIDATA (0x3C)
-#define S3C2410_SDIIMSK (0x40)
-
-#define S3C2440_SDIDATA (0x40)
-#define S3C2440_SDIIMSK (0x3C)
-
-#define S3C2440_SDICON_SDRESET (1<<8)
-#define S3C2440_SDICON_MMCCLOCK (1<<5)
-#define S3C2410_SDICON_BYTEORDER (1<<4)
-#define S3C2410_SDICON_SDIOIRQ (1<<3)
-#define S3C2410_SDICON_RWAITEN (1<<2)
-#define S3C2410_SDICON_FIFORESET (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-#define S3C2410_SDICMDCON_INDEX (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-#define S3C2440_SDIDCON_DS_WORD (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-#define S3C2410_SDIDCON_DMAEN (1<<15)
-#define S3C2410_SDIDCON_STOP (1<<14)
-#define S3C2440_SDIDCON_DATSTART (1<<14)
-#define S3C2410_SDIDCON_DATMODE (3<<12)
-#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET (1<<13)
-#define S3C2410_SDIFSTA_RFDET (1<<12)
-#define S3C2410_SDIFSTA_TFHALF (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-#define S3C2410_SDIFSTA_RFLAST (1<<9)
-#define S3C2410_SDIFSTA_RFFULL (1<<8)
-#define S3C2410_SDIFSTA_RFHALF (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-#define S3C2410_SDIIMSK_READWAIT (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-#define S3C2410_SDIIMSK_DATACRC (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/syscore_ops.h>
+#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/irq.h>
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/irq.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/pm.h>
-#include <plat/irq.h>
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
return 0;
}
-/* FIXME: make static when it's out of plat-samsung/irq.h */
-int s3c_irqext_type(struct irq_data *data, unsigned int type)
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
{
void __iomem *extint_reg;
void __iomem *gpcon_reg;
extint_offset, type);
}
-struct irq_chip s3c_irq_chip = {
+static struct irq_chip s3c_irq_chip = {
.name = "s3c",
.irq_ack = s3c_irq_ack,
.irq_mask = s3c_irq_mask,
.irq_set_wake = s3c_irq_wake
};
-struct irq_chip s3c_irq_level_chip = {
+static struct irq_chip s3c_irq_level_chip = {
.name = "s3c-level",
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include "common.h"
#include "s3c2412-power.h"
static struct map_desc jive_iodesc[] __initdata = {
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include "common.h"
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
#include "common.h"
#include "otom.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
-
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2413_iodesc[] __initdata = {
};
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/fb.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2416_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
-
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2443_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include "common.h"
static struct map_desc vstms_iodesc[] __initdata = {
};
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/s3c2412.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
-/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
- *
+/*
* Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
+#define __ASM_ARCH_REGS_DSC_H __FILE__
-#if defined(CONFIG_CPU_S3C2412)
+/* S3C2412 */
#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
-#endif
-
-#if defined(CONFIG_CPU_S3C2416)
-#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0)
-#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4)
-#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8)
-#define S3C2416_DSC3 S3C2410_GPIOREG(0x110)
-
-#define S3C2416_SELECT_DSC0 (0 << 30)
-#define S3C2416_SELECT_DSC1 (1 << 30)
-#define S3C2416_SELECT_DSC2 (2 << 30)
-#define S3C2416_SELECT_DSC3 (3 << 30)
-
-#define S3C2416_DSC_GETSHIFT(x) (x & 30)
-
-#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28)
-#define S3C2416_DSC0_CF_5mA (0 << 28)
-#define S3C2416_DSC0_CF_10mA (1 << 28)
-#define S3C2416_DSC0_CF_15mA (2 << 28)
-#define S3C2416_DSC0_CF_21mA (3 << 28)
-#define S3C2416_DSC0_CF_MASK (3 << 28)
-
-#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26)
-#define S3C2416_DSC0_nRBE_5mA (0 << 26)
-#define S3C2416_DSC0_nRBE_10mA (1 << 26)
-#define S3C2416_DSC0_nRBE_15mA (2 << 26)
-#define S3C2416_DSC0_nRBE_21mA (3 << 26)
-#define S3C2416_DSC0_nRBE_MASK (3 << 26)
-
-#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24)
-#define S3C2416_DSC0_nROE_5mA (0 << 24)
-#define S3C2416_DSC0_nROE_10mA (1 << 24)
-#define S3C2416_DSC0_nROE_15mA (2 << 24)
-#define S3C2416_DSC0_nROE_21mA (3 << 24)
-#define S3C2416_DSC0_nROE_MASK (3 << 24)
-
-#endif
-
-#if defined(CONFIG_CPU_S3C244X)
+/* S3C2440 */
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
-#define S3C2440_SELECT_DSC0 (0)
-#define S3C2440_SELECT_DSC1 (1<<31)
-
-#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
-
-#define S3C2440_DSC0_DISABLE (1<<31)
-
-#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8)
-#define S3C2440_DSC0_ADDR_12mA (0<<8)
-#define S3C2440_DSC0_ADDR_10mA (1<<8)
-#define S3C2440_DSC0_ADDR_8mA (2<<8)
-#define S3C2440_DSC0_ADDR_6mA (3<<8)
-#define S3C2440_DSC0_ADDR_MASK (3<<8)
-
-/* D24..D31 */
-#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6)
-#define S3C2440_DSC0_DATA3_12mA (0<<6)
-#define S3C2440_DSC0_DATA3_10mA (1<<6)
-#define S3C2440_DSC0_DATA3_8mA (2<<6)
-#define S3C2440_DSC0_DATA3_6mA (3<<6)
-#define S3C2440_DSC0_DATA3_MASK (3<<6)
-
-/* D16..D23 */
-#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4)
-#define S3C2440_DSC0_DATA2_12mA (0<<4)
-#define S3C2440_DSC0_DATA2_10mA (1<<4)
-#define S3C2440_DSC0_DATA2_8mA (2<<4)
-#define S3C2440_DSC0_DATA2_6mA (3<<4)
-#define S3C2440_DSC0_DATA2_MASK (3<<4)
-
-/* D8..D15 */
-#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2)
-#define S3C2440_DSC0_DATA1_12mA (0<<2)
-#define S3C2440_DSC0_DATA1_10mA (1<<2)
-#define S3C2440_DSC0_DATA1_8mA (2<<2)
-#define S3C2440_DSC0_DATA1_6mA (3<<2)
-#define S3C2440_DSC0_DATA1_MASK (3<<2)
-
-/* D0..D7 */
-#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0)
-#define S3C2440_DSC0_DATA0_12mA (0<<0)
-#define S3C2440_DSC0_DATA0_10mA (1<<0)
-#define S3C2440_DSC0_DATA0_8mA (2<<0)
-#define S3C2440_DSC0_DATA0_6mA (3<<0)
-#define S3C2440_DSC0_DATA0_MASK (3<<0)
-
-#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28)
-#define S3C2440_DSC1_SCK1_12mA (0<<28)
-#define S3C2440_DSC1_SCK1_10mA (1<<28)
-#define S3C2440_DSC1_SCK1_8mA (2<<28)
-#define S3C2440_DSC1_SCK1_6mA (3<<28)
-#define S3C2440_DSC1_SCK1_MASK (3<<28)
-
-#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26)
-#define S3C2440_DSC1_SCK0_12mA (0<<26)
-#define S3C2440_DSC1_SCK0_10mA (1<<26)
-#define S3C2440_DSC1_SCK0_8mA (2<<26)
-#define S3C2440_DSC1_SCK0_6mA (3<<26)
-#define S3C2440_DSC1_SCK0_MASK (3<<26)
-
-#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24)
-#define S3C2440_DSC1_SCKE_10mA (0<<24)
-#define S3C2440_DSC1_SCKE_8mA (1<<24)
-#define S3C2440_DSC1_SCKE_6mA (2<<24)
-#define S3C2440_DSC1_SCKE_4mA (3<<24)
-#define S3C2440_DSC1_SCKE_MASK (3<<24)
-
-/* SDRAM nRAS/nCAS */
-#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22)
-#define S3C2440_DSC1_SDR_10mA (0<<22)
-#define S3C2440_DSC1_SDR_8mA (1<<22)
-#define S3C2440_DSC1_SDR_6mA (2<<22)
-#define S3C2440_DSC1_SDR_4mA (3<<22)
-#define S3C2440_DSC1_SDR_MASK (3<<22)
-
-/* NAND Flash Controller */
-#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20)
-#define S3C2440_DSC1_NFC_10mA (0<<20)
-#define S3C2440_DSC1_NFC_8mA (1<<20)
-#define S3C2440_DSC1_NFC_6mA (2<<20)
-#define S3C2440_DSC1_NFC_4mA (3<<20)
-#define S3C2440_DSC1_NFC_MASK (3<<20)
-
-/* nBE[0..3] */
-#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18)
-#define S3C2440_DSC1_nBE_10mA (0<<18)
-#define S3C2440_DSC1_nBE_8mA (1<<18)
-#define S3C2440_DSC1_nBE_6mA (2<<18)
-#define S3C2440_DSC1_nBE_4mA (3<<18)
-#define S3C2440_DSC1_nBE_MASK (3<<18)
-
-#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16)
-#define S3C2440_DSC1_WOE_10mA (0<<16)
-#define S3C2440_DSC1_WOE_8mA (1<<16)
-#define S3C2440_DSC1_WOE_6mA (2<<16)
-#define S3C2440_DSC1_WOE_4mA (3<<16)
-#define S3C2440_DSC1_WOE_MASK (3<<16)
-
-#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14)
-#define S3C2440_DSC1_CS7_10mA (0<<14)
-#define S3C2440_DSC1_CS7_8mA (1<<14)
-#define S3C2440_DSC1_CS7_6mA (2<<14)
-#define S3C2440_DSC1_CS7_4mA (3<<14)
-#define S3C2440_DSC1_CS7_MASK (3<<14)
-
-#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12)
-#define S3C2440_DSC1_CS6_10mA (0<<12)
-#define S3C2440_DSC1_CS6_8mA (1<<12)
-#define S3C2440_DSC1_CS6_6mA (2<<12)
-#define S3C2440_DSC1_CS6_4mA (3<<12)
-#define S3C2440_DSC1_CS6_MASK (3<<12)
-
-#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10)
-#define S3C2440_DSC1_CS5_10mA (0<<10)
-#define S3C2440_DSC1_CS5_8mA (1<<10)
-#define S3C2440_DSC1_CS5_6mA (2<<10)
-#define S3C2440_DSC1_CS5_4mA (3<<10)
-#define S3C2440_DSC1_CS5_MASK (3<<10)
-
-#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8)
-#define S3C2440_DSC1_CS4_10mA (0<<8)
-#define S3C2440_DSC1_CS4_8mA (1<<8)
-#define S3C2440_DSC1_CS4_6mA (2<<8)
-#define S3C2440_DSC1_CS4_4mA (3<<8)
-#define S3C2440_DSC1_CS4_MASK (3<<8)
-
-#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6)
-#define S3C2440_DSC1_CS3_10mA (0<<6)
-#define S3C2440_DSC1_CS3_8mA (1<<6)
-#define S3C2440_DSC1_CS3_6mA (2<<6)
-#define S3C2440_DSC1_CS3_4mA (3<<6)
-#define S3C2440_DSC1_CS3_MASK (3<<6)
-
-#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4)
-#define S3C2440_DSC1_CS2_10mA (0<<4)
-#define S3C2440_DSC1_CS2_8mA (1<<4)
-#define S3C2440_DSC1_CS2_6mA (2<<4)
-#define S3C2440_DSC1_CS2_4mA (3<<4)
-#define S3C2440_DSC1_CS2_MASK (3<<4)
-
-#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2)
-#define S3C2440_DSC1_CS1_10mA (0<<2)
-#define S3C2440_DSC1_CS1_8mA (1<<2)
-#define S3C2440_DSC1_CS1_6mA (2<<2)
-#define S3C2440_DSC1_CS1_4mA (3<<2)
-#define S3C2440_DSC1_CS1_MASK (3<<2)
-
-#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0)
-#define S3C2440_DSC1_CS0_10mA (0<<0)
-#define S3C2440_DSC1_CS0_8mA (1<<0)
-#define S3C2440_DSC1_CS0_6mA (2<<0)
-#define S3C2440_DSC1_CS0_4mA (3<<0)
-#define S3C2440_DSC1_CS0_MASK (3<<0)
-
-#endif /* CONFIG_CPU_S3C2440 */
-
#endif /* __ASM_ARCH_REGS_DSC_H */
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c2412.h>
#include "common.h"
#include "regs-dsc.h"
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2416.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/clock.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb-core.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
obj-y += dev-uart.o
obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
# Device setup
*/
enum dma_ch {
/* DMA0/SDMA0 */
- DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_UART0 = 0,
DMACH_UART0_SRC2,
DMACH_UART1,
void s5pc100_restart(char mode, const char *cmd);
-#ifdef CONFIG_CPU_S5PC100
-
extern int s5pc100_init(void);
extern void s5pc100_map_io(void);
extern void s5pc100_init_clocks(int xtal);
extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
-
#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
.name = "pcmcdclk",
};
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
static struct clk init_clocks_off[] = {
{
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
.name = "rot",
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1<<19),
};
+static struct clk clk_pdma0 = {
+ .name = "pdma0",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+ .name = "pdma1",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
&clk_hsmmc1,
&clk_hsmmc2,
&clk_hsmmc3,
+ &clk_pdma0,
+ &clk_pdma1,
};
/* Clock initialisation code */
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
};
void __init s5pv210_register_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
s3c_disable_clocks(clk_cdev[ptr], 1);
- s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
void s5pv210_restart(char mode, const char *cmd);
-#ifdef CONFIG_CPU_S5PV210
-
extern int s5pv210_init(void);
extern void s5pv210_map_io(void);
extern void s5pv210_init_clocks(int xtal);
extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
-
#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .bus_type = FIMC_BUS_TYPE_ITU_601,
+ .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_hspi.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/usb/otg.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/emev2.h>
#include <asm/smp_plat.h>
}
-static void __cpuinit emev2_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
struct smp_operations emev2_smp_ops __initdata = {
.smp_init_cpus = emev2_smp_init_cpus,
.smp_prepare_cpus = emev2_smp_prepare_cpus,
- .smp_secondary_init = emev2_secondary_init,
.smp_boot_secondary = emev2_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = emev2_cpu_kill,
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/r8a7779.h>
#include <asm/smp_plat.h>
}
-static void __cpuinit r8a7779_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
struct r8a7779_pm_ch *ch = NULL;
struct smp_operations r8a7779_smp_ops __initdata = {
.smp_init_cpus = r8a7779_smp_init_cpus,
.smp_prepare_cpus = r8a7779_smp_prepare_cpus,
- .smp_secondary_init = r8a7779_secondary_init,
.smp_boot_secondary = r8a7779_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = r8a7779_cpu_kill,
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
return scu_get_core_count(scu_base);
}
-static void __cpuinit sh73a0_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
struct smp_operations sh73a0_smp_ops __initdata = {
.smp_init_cpus = sh73a0_smp_init_cpus,
.smp_prepare_cpus = sh73a0_smp_prepare_cpus,
- .smp_secondary_init = sh73a0_secondary_init,
.smp_boot_secondary = sh73a0_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = sh73a0_cpu_kill,
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
extern void __iomem *sys_manager_base_addr;
extern void __iomem *rst_manager_base_addr;
-static void __cpuinit socfpga_secondary_init(unsigned int cpu)
-{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-}
-
static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
struct smp_operations socfpga_smp_ops __initdata = {
.smp_init_cpus = socfpga_smp_init_cpus,
.smp_prepare_cpus = socfpga_smp_prepare_cpus,
- .smp_secondary_init = socfpga_secondary_init,
.smp_boot_secondary = socfpga_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = socfpga_cpu_die,
#include <linux/jiffies.h>
#include <linux/io.h>
#include <linux/smp.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
#include <linux/amba/pl022.h>
#include <linux/clk.h>
+#include <linux/clocksource.h>
#include <linux/dw_dmac.h>
#include <linux/err.h>
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include <asm/smp_twd.h>
#include <mach/dma.h>
#include <mach/generic.h>
#include <mach/spear.h>
clk_put(pclk);
spear_setup_of_timer();
- twd_local_timer_of_register();
+ clocksource_of_init();
}
#define pr_fmt(fmt) "SPEAr3xx: " fmt
#include <linux/amba/pl022.h>
-#include <linux/amba/pl08x.h>
+#include <linux/amba/pl080.h>
#include <linux/io.h>
#include <plat/pl080.h>
#include <mach/generic.h>
config ARCH_SUNXI
bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
select CLKSRC_MMIO
+ select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select PINCTRL
select SPARSE_IRQ
- select SUNXI_TIMER
- select PINCTRL_SUNXI
\ No newline at end of file
+ select SUN4I_TIMER
+ select PINCTRL_SUNXI
* warranty of any kind, whether express or implied.
*/
+#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/io.h>
-#include <linux/sunxi_timer.h>
-#include <linux/irqchip/sunxi.h>
+#include <linux/clk/sunxi.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/system_misc.h>
#include "sunxi.h"
-#define WATCHDOG_CTRL_REG 0x00
-#define WATCHDOG_CTRL_RESTART (1 << 0)
-#define WATCHDOG_MODE_REG 0x04
-#define WATCHDOG_MODE_ENABLE (1 << 0)
-#define WATCHDOG_MODE_RESET_ENABLE (1 << 1)
+#define SUN4I_WATCHDOG_CTRL_REG 0x00
+#define SUN4I_WATCHDOG_CTRL_RESTART (1 << 0)
+#define SUN4I_WATCHDOG_MODE_REG 0x04
+#define SUN4I_WATCHDOG_MODE_ENABLE (1 << 0)
+#define SUN4I_WATCHDOG_MODE_RESET_ENABLE (1 << 1)
static void __iomem *wdt_base;
-static void sunxi_setup_restart(void)
-{
- struct device_node *np = of_find_compatible_node(NULL, NULL,
- "allwinner,sunxi-wdt");
- if (WARN(!np, "unable to setup watchdog restart"))
- return;
-
- wdt_base = of_iomap(np, 0);
- WARN(!wdt_base, "failed to map watchdog base address");
-}
-
-static void sunxi_restart(char mode, const char *cmd)
+static void sun4i_restart(char mode, const char *cmd)
{
if (!wdt_base)
return;
/* Enable timer and set reset bit in the watchdog */
- writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
- wdt_base + WATCHDOG_MODE_REG);
+ writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
+ wdt_base + SUN4I_WATCHDOG_MODE_REG);
/*
* Restart the watchdog. The default (and lowest) interval
* value for the watchdog is 0.5s.
*/
- writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG);
+ writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG);
while (1) {
mdelay(5);
- writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
- wdt_base + WATCHDOG_MODE_REG);
+ writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
+ wdt_base + SUN4I_WATCHDOG_MODE_REG);
}
}
+static struct of_device_id sunxi_restart_ids[] = {
+ { .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart },
+ { /*sentinel*/ }
+};
+
+static void sunxi_setup_restart(void)
+{
+ const struct of_device_id *of_id;
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, sunxi_restart_ids);
+ if (WARN(!np, "unable to setup watchdog restart"))
+ return;
+
+ wdt_base = of_iomap(np, 0);
+ WARN(!wdt_base, "failed to map watchdog base address");
+
+ of_id = of_match_node(sunxi_restart_ids, np);
+ WARN(!of_id, "restart function not available");
+
+ arm_pm_restart = of_id->data;
+}
+
static struct map_desc sunxi_io_desc[] __initdata = {
{
.virtual = (unsigned long) SUNXI_REGS_VIRT_BASE,
iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc));
}
+static void __init sunxi_timer_init(void)
+{
+ sunxi_init_clocks();
+ clocksource_of_init();
+}
+
static void __init sunxi_dt_init(void)
{
sunxi_setup_restart();
DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
.init_machine = sunxi_dt_init,
.map_io = sunxi_map_io,
- .init_irq = sunxi_init_irq,
- .handle_irq = sunxi_handle_irq,
- .restart = sunxi_restart,
- .init_time = &sunxi_timer_init,
+ .init_irq = irqchip_init,
+ .init_time = sunxi_timer_init,
.dt_compat = sunxi_board_dt_compat,
MACHINE_END
obj-y += reset.o
obj-y += reset-handler.o
obj-y += sleep.o
+obj-y += tegra.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
endif
+++ /dev/null
-/*
- * NVIDIA Tegra114 device tree board support
- *
- * Copyright (C) 2013 NVIDIA Corporation
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/clocksource.h>
-
-#include <asm/mach/arch.h>
-
-#include "board.h"
-#include "common.h"
-
-static void __init tegra114_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const tegra114_dt_board_compat[] = {
- "nvidia,tegra114",
- NULL,
-};
-
-DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)")
- .smp = smp_ops(tegra_smp_ops),
- .map_io = tegra_map_common_io,
- .init_early = tegra114_init_early,
- .init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
- .init_machine = tegra114_dt_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
- .dt_compat = tegra114_dt_board_compat,
-MACHINE_END
+++ /dev/null
-/*
- * nVidia Tegra device tree board support
- *
- * Copyright (C) 2010 Secret Lab Technologies, Ltd.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <linux/pda_power.h>
-#include <linux/platform_data/tegra_usb.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
-#include <linux/usb/tegra_usb_phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/setup.h>
-
-#include "board.h"
-#include "common.h"
-#include "iomap.h"
-
-static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
- .operating_mode = TEGRA_USB_OTG,
- .power_down_on_bus_suspend = 1,
- .vbus_gpio = -1,
-};
-
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
- .reset_gpio = -1,
- .clk = "cdev2",
-};
-
-static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
- .phy_config = &tegra_ehci2_ulpi_phy_config,
- .operating_mode = TEGRA_USB_HOST,
- .power_down_on_bus_suspend = 1,
- .vbus_gpio = -1,
-};
-
-static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
- .operating_mode = TEGRA_USB_HOST,
- .power_down_on_bus_suspend = 1,
- .vbus_gpio = -1,
-};
-
-static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5000000, "tegra-ehci.0",
- &tegra_ehci1_pdata),
- OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5004000, "tegra-ehci.1",
- &tegra_ehci2_pdata),
- OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5008000, "tegra-ehci.2",
- &tegra_ehci3_pdata),
- {}
-};
-
-static void __init tegra_dt_init(void)
-{
- /*
- * Finished with the static registrations now; fill in the missing
- * devices
- */
- of_platform_populate(NULL, of_default_bus_match_table,
- tegra20_auxdata_lookup, NULL);
-}
-
-static void __init trimslice_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
- int ret;
-
- ret = tegra_pcie_init(true, true);
- if (ret)
- pr_err("tegra_pci_init() failed: %d\n", ret);
-#endif
-}
-
-static void __init harmony_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
- int ret;
-
- ret = harmony_pcie_init();
- if (ret)
- pr_err("harmony_pcie_init() failed: %d\n", ret);
-#endif
-}
-
-static void __init paz00_init(void)
-{
- tegra_paz00_wifikill_init();
-}
-
-static struct {
- char *machine;
- void (*init)(void);
-} board_init_funcs[] = {
- { "compulab,trimslice", trimslice_init },
- { "nvidia,harmony", harmony_init },
- { "compal,paz00", paz00_init },
-};
-
-static void __init tegra_dt_init_late(void)
-{
- int i;
-
- tegra_init_late();
-
- for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
- if (of_machine_is_compatible(board_init_funcs[i].machine)) {
- board_init_funcs[i].init();
- break;
- }
- }
-}
-
-static const char *tegra20_dt_board_compat[] = {
- "nvidia,tegra20",
- NULL
-};
-
-DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
- .map_io = tegra_map_common_io,
- .smp = smp_ops(tegra_smp_ops),
- .init_early = tegra20_init_early,
- .init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
- .init_machine = tegra_dt_init,
- .init_late = tegra_dt_init_late,
- .restart = tegra_assert_system_reset,
- .dt_compat = tegra20_dt_board_compat,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-dt-tegra30.c
- *
- * NVIDIA Tegra30 device tree board support
- *
- * Copyright (C) 2011 NVIDIA Corporation
- *
- * Derived from:
- *
- * arch/arm/mach-tegra/board-dt-tegra20.c
- *
- * Copyright (C) 2010 Secret Lab Technologies, Ltd.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "board.h"
-#include "common.h"
-#include "iomap.h"
-
-static void __init tegra30_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *tegra30_dt_board_compat[] = {
- "nvidia,tegra30",
- NULL
-};
-
-DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
- .smp = smp_ops(tegra_smp_ops),
- .map_io = tegra_map_common_io,
- .init_early = tegra30_init_early,
- .init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
- .init_machine = tegra30_dt_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
- .dt_compat = tegra30_dt_board_compat,
-MACHINE_END
goto err_reg;
}
- regulator_enable(regulator);
+ err = regulator_enable(regulator);
+ if (err) {
+ pr_err("%s: regulator_enable failed: %d\n", __func__, err);
+ goto err_en;
+ }
err = tegra_pcie_init(true, true);
if (err) {
err_pcie:
regulator_disable(regulator);
+err_en:
regulator_put(regulator);
err_reg:
gpio_free(en_vdd_1v05);
void tegra_assert_system_reset(char mode, const char *cmd);
-void __init tegra20_init_early(void);
-void __init tegra30_init_early(void);
-void __init tegra114_init_early(void);
+void __init tegra_init_early(void);
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
void __init tegra_dt_init_irq(void);
}
-static void __init tegra_init_early(void)
+void __init tegra_init_early(void)
{
tegra_cpu_reset_handler_init();
tegra_apb_io_init();
tegra_init_cache();
tegra_pmc_init();
tegra_powergate_init();
+ tegra_hotplug_init();
}
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void __init tegra20_init_early(void)
-{
- tegra_init_early();
- tegra20_hotplug_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-void __init tegra30_init_early(void)
-{
- tegra_init_early();
- tegra30_hotplug_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
-void __init tegra114_init_early(void)
-{
- tegra_init_early();
-}
-#endif
-
void __init tegra_init_late(void)
{
tegra_powergate_debugfs_init();
smp_wmb();
- save_cpu_arch_register();
-
cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
- restore_cpu_arch_register();
-
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
return true;
ENTRY(tegra_secondary_startup)
bl v7_invalidate_l1
- /* Enable coresight */
- mov32 r0, 0xC5ACCE55
- mcr p14, 0, r0, c7, c12, 6
b secondary_startup
ENDPROC(tegra_secondary_startup)
/*
- *
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
- * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
+#include "fuse.h"
#include "sleep.h"
static void (*tegra_hotplug_shutdown)(void);
return cpu == 0 ? -EPERM : 0;
}
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-extern void tegra20_hotplug_shutdown(void);
-void __init tegra20_hotplug_init(void)
+void __init tegra_hotplug_init(void)
{
- tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
-}
-#endif
+ if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
+ return;
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-extern void tegra30_hotplug_shutdown(void);
-void __init tegra30_hotplug_init(void)
-{
- tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
}
-#endif
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <linux/clk/tegra.h>
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
-#include <mach/powergate.h>
-
#include "fuse.h"
#include "flowctrl.h"
#include "reset.h"
+#include "pmc.h"
#include "common.h"
#include "iomap.h"
-extern void tegra_secondary_startup(void);
-
static cpumask_t tegra_cpu_init_mask;
-#define EVP_CPU_RESET_VECTOR \
- (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-
static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
}
-static int tegra20_power_up_cpu(unsigned int cpu)
+
+static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- /* Enable the CPU clock. */
- tegra_enable_cpu_clock(cpu);
+ cpu = cpu_logical_map(cpu);
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ /*
+ * Force the CPU into reset. The CPU must remain in reset when
+ * the flow controller state is cleared (which will cause the
+ * flow controller to stop driving reset if the CPU has been
+ * power-gated via the flow controller). This will have no
+ * effect on first boot of the CPU since it should already be
+ * in reset.
+ */
+ tegra_put_cpu_in_reset(cpu);
+ /*
+ * Unhalt the CPU. If the flow controller was used to
+ * power-gate the CPU this will cause the flow controller to
+ * stop driving reset. The CPU will remain in reset because the
+ * clock and reset block is now driving reset.
+ */
+ flowctrl_write_cpu_halt(cpu, 0);
+
+ tegra_enable_cpu_clock(cpu);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int tegra30_power_up_cpu(unsigned int cpu)
+static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int ret, pwrgateid;
+ int ret;
unsigned long timeout;
- pwrgateid = tegra_cpu_powergate_id(cpu);
- if (pwrgateid < 0)
- return pwrgateid;
+ cpu = cpu_logical_map(cpu);
+ tegra_put_cpu_in_reset(cpu);
+ flowctrl_write_cpu_halt(cpu, 0);
/*
* The power up sequence of cold boot CPU and warm boot CPU
* the IO clamps.
* For cold boot CPU, do not wait. After the cold boot CPU be
* booted, it will run to tegra_secondary_init() and set
- * tegra_cpu_init_mask which influences what tegra30_power_up_cpu()
+ * tegra_cpu_init_mask which influences what tegra30_boot_secondary()
* next time around.
*/
if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
timeout = jiffies + msecs_to_jiffies(50);
do {
- if (!tegra_powergate_is_powered(pwrgateid))
+ if (tegra_pmc_cpu_is_powered(cpu))
goto remove_clamps;
udelay(10);
} while (time_before(jiffies, timeout));
* be un-gated by un-toggling the power gate register
* manually.
*/
- if (!tegra_powergate_is_powered(pwrgateid)) {
- ret = tegra_powergate_power_on(pwrgateid);
+ if (!tegra_pmc_cpu_is_powered(cpu)) {
+ ret = tegra_pmc_cpu_power_on(cpu);
if (ret)
return ret;
/* Wait for the power to come up. */
timeout = jiffies + msecs_to_jiffies(100);
- while (tegra_powergate_is_powered(pwrgateid)) {
+ while (tegra_pmc_cpu_is_powered(cpu)) {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
udelay(10);
udelay(10);
/* Remove I/O clamps. */
- ret = tegra_powergate_remove_clamping(pwrgateid);
- udelay(10);
+ ret = tegra_pmc_cpu_remove_clamping(cpu);
+ if (ret)
+ return ret;
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ udelay(10);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit tegra_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
{
- int status;
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ return tegra20_boot_secondary(cpu, idle);
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ return tegra30_boot_secondary(cpu, idle);
- cpu = cpu_logical_map(cpu);
-
- /*
- * Force the CPU into reset. The CPU must remain in reset when the
- * flow controller state is cleared (which will cause the flow
- * controller to stop driving reset if the CPU has been power-gated
- * via the flow controller). This will have no effect on first boot
- * of the CPU since it should already be in reset.
- */
- tegra_put_cpu_in_reset(cpu);
-
- /*
- * Unhalt the CPU. If the flow controller was used to power-gate the
- * CPU this will cause the flow controller to stop driving reset.
- * The CPU will remain in reset because the clock and reset block
- * is now driving reset.
- */
- flowctrl_write_cpu_halt(cpu, 0);
-
- switch (tegra_chip_id) {
- case TEGRA20:
- status = tegra20_power_up_cpu(cpu);
- break;
- case TEGRA30:
- status = tegra30_power_up_cpu(cpu);
- break;
- default:
- status = -EINVAL;
- break;
- }
-
- if (status)
- goto done;
-
- /* Take the CPU out of reset. */
- tegra_cpu_out_of_reset(cpu);
-done:
- return status;
+ return -EINVAL;
}
static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
#define PMC_CPUPWROFF_TIMER 0xcc
#ifdef CONFIG_PM_SLEEP
-static unsigned int g_diag_reg;
static DEFINE_SPINLOCK(tegra_lp2_lock);
static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
static struct clk *tegra_pclk;
void (*tegra_tear_down_cpu)(void);
-void save_cpu_arch_register(void)
-{
- /* read diagnostic register */
- asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
- return;
-}
-
-void restore_cpu_arch_register(void)
-{
- /* write diagnostic register */
- asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
- return;
-}
-
static void set_power_timers(unsigned long us_on, unsigned long us_off)
{
unsigned long long ticks;
tegra_cpu_clock_resume();
flowctrl_cpu_suspend_exit(cpu);
-
- restore_cpu_arch_register();
}
/*
tegra_cpu_clock_suspend();
flowctrl_cpu_suspend_enter(cpu);
-
- save_cpu_arch_register();
}
void tegra_clear_cpu_in_lp2(int phy_cpu_id)
static int tegra_sleep_cpu(unsigned long v2p)
{
- /* Switch to the identity mapping. */
- cpu_switch_mm(idmap_pgd, &init_mm);
-
- /* Flush the TLB. */
- local_flush_tlb_all();
-
+ setup_mm_for_reboot();
tegra_sleep_cpu_finish(v2p);
/* should never here */
/*
- * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
-#include "iomap.h"
+#define PMC_CTRL 0x0
+#define PMC_CTRL_INTR_LOW (1 << 17)
+#define PMC_PWRGATE_TOGGLE 0x30
+#define PMC_PWRGATE_TOGGLE_START (1 << 8)
+#define PMC_REMOVE_CLAMPING 0x34
+#define PMC_PWRGATE_STATUS 0x38
-#define PMC_CTRL 0x0
-#define PMC_CTRL_INTR_LOW (1 << 17)
+#define TEGRA_POWERGATE_PCIE 3
+#define TEGRA_POWERGATE_VDEC 4
+#define TEGRA_POWERGATE_CPU1 9
+#define TEGRA_POWERGATE_CPU2 10
+#define TEGRA_POWERGATE_CPU3 11
+
+static u8 tegra_cpu_domains[] = {
+ 0xFF, /* not available for CPU0 */
+ TEGRA_POWERGATE_CPU1,
+ TEGRA_POWERGATE_CPU2,
+ TEGRA_POWERGATE_CPU3,
+};
+static DEFINE_SPINLOCK(tegra_powergate_lock);
+
+static void __iomem *tegra_pmc_base;
+static bool tegra_pmc_invert_interrupt;
static inline u32 tegra_pmc_readl(u32 reg)
{
- return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg));
+ return readl(tegra_pmc_base + reg);
}
static inline void tegra_pmc_writel(u32 val, u32 reg)
{
- writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg));
+ writel(val, tegra_pmc_base + reg);
+}
+
+static int tegra_pmc_get_cpu_powerdomain_id(int cpuid)
+{
+ if (cpuid <= 0 || cpuid >= num_possible_cpus())
+ return -EINVAL;
+ return tegra_cpu_domains[cpuid];
+}
+
+static bool tegra_pmc_powergate_is_powered(int id)
+{
+ return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1;
+}
+
+static int tegra_pmc_powergate_set(int id, bool new_state)
+{
+ bool old_state;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tegra_powergate_lock, flags);
+
+ old_state = tegra_pmc_powergate_is_powered(id);
+ WARN_ON(old_state == new_state);
+
+ tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE);
+
+ spin_unlock_irqrestore(&tegra_powergate_lock, flags);
+
+ return 0;
+}
+
+static int tegra_pmc_powergate_remove_clamping(int id)
+{
+ u32 mask;
+
+ /*
+ * Tegra has a bug where PCIE and VDE clamping masks are
+ * swapped relatively to the partition ids.
+ */
+ if (id == TEGRA_POWERGATE_VDEC)
+ mask = (1 << TEGRA_POWERGATE_PCIE);
+ else if (id == TEGRA_POWERGATE_PCIE)
+ mask = (1 << TEGRA_POWERGATE_VDEC);
+ else
+ mask = (1 << id);
+
+ tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING);
+
+ return 0;
+}
+
+bool tegra_pmc_cpu_is_powered(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return false;
+ return tegra_pmc_powergate_is_powered(id);
+}
+
+int tegra_pmc_cpu_power_on(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return id;
+ return tegra_pmc_powergate_set(id, true);
+}
+
+int tegra_pmc_cpu_remove_clamping(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return id;
+ return tegra_pmc_powergate_remove_clamping(id);
}
-#ifdef CONFIG_OF
static const struct of_device_id matches[] __initconst = {
+ { .compatible = "nvidia,tegra114-pmc" },
+ { .compatible = "nvidia,tegra30-pmc" },
{ .compatible = "nvidia,tegra20-pmc" },
{ }
};
-#endif
-void __init tegra_pmc_init(void)
+static void tegra_pmc_parse_dt(void)
{
- /*
- * For now, Harmony is the only board that uses the PMC, and it wants
- * the signal inverted. Seaboard would too if it used the PMC.
- * Hopefully by the time other boards want to use the PMC, everything
- * will be device-tree, or they also want it inverted.
- */
- bool invert_interrupt = true;
- u32 val;
+ struct device_node *np;
-#ifdef CONFIG_OF
- if (of_have_populated_dt()) {
- struct device_node *np;
+ np = of_find_matching_node(NULL, matches);
+ BUG_ON(!np);
- invert_interrupt = false;
+ tegra_pmc_base = of_iomap(np, 0);
+
+ tegra_pmc_invert_interrupt = of_property_read_bool(np,
+ "nvidia,invert-interrupt");
+}
+
+void __init tegra_pmc_init(void)
+{
+ u32 val;
- np = of_find_matching_node(NULL, matches);
- if (np) {
- if (of_find_property(np, "nvidia,invert-interrupt",
- NULL))
- invert_interrupt = true;
- }
- }
-#endif
+ tegra_pmc_parse_dt();
val = tegra_pmc_readl(PMC_CTRL);
- if (invert_interrupt)
+ if (tegra_pmc_invert_interrupt)
val |= PMC_CTRL_INTR_LOW;
else
val &= ~PMC_CTRL_INTR_LOW;
#ifndef __MACH_TEGRA_PMC_H
#define __MACH_TEGRA_PMC_H
+bool tegra_pmc_cpu_is_powered(int cpuid);
+int tegra_pmc_cpu_power_on(int cpuid);
+int tegra_pmc_cpu_remove_clamping(int cpuid);
+
void tegra_pmc_init(void);
#endif
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/seq_file.h>
if (status == new_state) {
spin_unlock_irqrestore(&tegra_powergate_lock, flags);
- return -EINVAL;
+ return 0;
}
pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE);
err_power:
return ret;
}
+EXPORT_SYMBOL(tegra_powergate_sequence_power_up);
int tegra_cpu_powergate_id(int cpuid)
{
*/
ENTRY(tegra_resume)
bl v7_invalidate_l1
- /* Enable coresight */
- mov32 r0, 0xC5ACCE55
- mcr p14, 0, r0, c7, c12, 6
cpu_id r0
cmp r0, #0 @ CPU0?
*
* Register usage within the reset handler:
*
+ * Others: scratch
+ * R6 = SoC ID << 8
* R7 = CPU present (to the OS) mask
* R8 = CPU in LP1 state mask
* R9 = CPU in LP2 state mask
ENTRY(__tegra_cpu_reset_handler)
cpsid aif, 0x13 @ SVC mode, interrupts disabled
+
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r6, [r6, #APB_MISC_GP_HIDREV]
+ and r6, r6, #0xff00
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+t20_check:
+ cmp r6, #(0x20 << 8)
+ bne after_t20_check
+t20_errata:
+ # Tegra20 is a Cortex-A9 r1p1
+ mrc p15, 0, r0, c1, c0, 0 @ read system control register
+ orr r0, r0, #1 << 14 @ erratum 716044
+ mcr p15, 0, r0, c1, c0, 0 @ write system control register
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 4 @ erratum 742230
+ orr r0, r0, #1 << 11 @ erratum 751472
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ b after_errata
+after_t20_check:
+#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+t30_check:
+ cmp r6, #(0x30 << 8)
+ bne after_t30_check
+t30_errata:
+ # Tegra30 is a Cortex-A9 r2p9
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 6 @ erratum 743622
+ orr r0, r0, #1 << 11 @ erratum 751472
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ b after_errata
+after_t30_check:
+#endif
+after_errata:
mrc p15, 0, r10, c0, c0, 5 @ MPIDR
and r10, r10, #0x3 @ R10 = CPU number
mov r11, #1
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
/* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
+ cmp r6, #(0x20 << 8)
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
- mov32 r6, TEGRA_PMC_BASE
+ mov32 r5, TEGRA_PMC_BASE
mov r0, #0
cmp r10, #0
- strne r0, [r6, #PMC_SCRATCH41]
+ strne r0, [r5, #PMC_SCRATCH41]
1:
#endif
/*
- * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
void tegra_disable_clean_inv_dcache(void);
#ifdef CONFIG_HOTPLUG_CPU
-void tegra20_hotplug_init(void);
-void tegra30_hotplug_init(void);
+void tegra20_hotplug_shutdown(void);
+void tegra30_hotplug_shutdown(void);
+void tegra_hotplug_init(void);
#else
-static inline void tegra20_hotplug_init(void) {}
-static inline void tegra30_hotplug_init(void) {}
+static inline void tegra_hotplug_init(void) {}
#endif
void tegra20_cpu_shutdown(int cpu);
--- /dev/null
+/*
+ * NVIDIA Tegra SoC device tree board support
+ *
+ * Copyright (C) 2011, 2013, NVIDIA Corporation
+ * Copyright (C) 2010 Secret Lab Technologies, Ltd.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/pda_power.h>
+#include <linux/platform_data/tegra_usb.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-tegra.h>
+#include <linux/usb/tegra_usb_phy.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/setup.h>
+
+#include "board.h"
+#include "common.h"
+#include "iomap.h"
+
+static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+ .operating_mode = TEGRA_USB_OTG,
+ .power_down_on_bus_suspend = 1,
+ .vbus_gpio = -1,
+};
+
+static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+ .reset_gpio = -1,
+ .clk = "cdev2",
+};
+
+static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+ .phy_config = &tegra_ehci2_ulpi_phy_config,
+ .operating_mode = TEGRA_USB_HOST,
+ .power_down_on_bus_suspend = 1,
+ .vbus_gpio = -1,
+};
+
+static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+ .operating_mode = TEGRA_USB_HOST,
+ .power_down_on_bus_suspend = 1,
+ .vbus_gpio = -1,
+};
+
+static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5000000, "tegra-ehci.0",
+ &tegra_ehci1_pdata),
+ OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5004000, "tegra-ehci.1",
+ &tegra_ehci2_pdata),
+ OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5008000, "tegra-ehci.2",
+ &tegra_ehci3_pdata),
+ {}
+};
+
+static void __init tegra_dt_init(void)
+{
+ /*
+ * Finished with the static registrations now; fill in the missing
+ * devices
+ */
+ of_platform_populate(NULL, of_default_bus_match_table,
+ tegra20_auxdata_lookup, NULL);
+}
+
+static void __init trimslice_init(void)
+{
+#ifdef CONFIG_TEGRA_PCI
+ int ret;
+
+ ret = tegra_pcie_init(true, true);
+ if (ret)
+ pr_err("tegra_pci_init() failed: %d\n", ret);
+#endif
+}
+
+static void __init harmony_init(void)
+{
+#ifdef CONFIG_TEGRA_PCI
+ int ret;
+
+ ret = harmony_pcie_init();
+ if (ret)
+ pr_err("harmony_pcie_init() failed: %d\n", ret);
+#endif
+}
+
+static void __init paz00_init(void)
+{
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+ tegra_paz00_wifikill_init();
+}
+
+static struct {
+ char *machine;
+ void (*init)(void);
+} board_init_funcs[] = {
+ { "compulab,trimslice", trimslice_init },
+ { "nvidia,harmony", harmony_init },
+ { "compal,paz00", paz00_init },
+};
+
+static void __init tegra_dt_init_late(void)
+{
+ int i;
+
+ tegra_init_late();
+
+ for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
+ if (of_machine_is_compatible(board_init_funcs[i].machine)) {
+ board_init_funcs[i].init();
+ break;
+ }
+ }
+}
+
+static const char * const tegra_dt_board_compat[] = {
+ "nvidia,tegra114",
+ "nvidia,tegra30",
+ "nvidia,tegra20",
+ NULL
+};
+
+DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
+ .map_io = tegra_map_common_io,
+ .smp = smp_ops(tegra_smp_ops),
+ .init_early = tegra_init_early,
+ .init_irq = tegra_dt_init_irq,
+ .init_time = clocksource_of_init,
+ .init_machine = tegra_dt_init,
+ .init_late = tegra_dt_init_late,
+ .restart = tegra_assert_system_reset,
+ .dt_compat = tegra_dt_board_compat,
+MACHINE_END
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
static void __cpuinit ux500_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/clocksource.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
twd_local_timer = &u8500_twd_local_timer;
if (of_have_populated_dt())
- twd_local_timer_of_register();
+ clocksource_of_init();
else {
err = twd_local_timer_register(twd_local_timer);
if (err)
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/clocksource.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <asm/arch_timer.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
-#include <asm/smp_twd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
vexpress_clk_of_init();
+ clocksource_of_init();
do {
node = of_find_compatible_node(node, NULL, "arm,sp804");
} while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
irq_of_parse_and_map(node, 0));
}
- if (arch_timer_of_register() != 0)
- twd_local_timer_of_register();
+ arch_timer_of_register();
if (arch_timer_sched_clock_init() != 0)
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
#include <linux/smp.h>
#include <linux/of.h>
-#include <linux/irqchip/arm-gic.h>
-
#include <asm/psci.h>
#include <asm/smp_plat.h>
return -ENODEV;
}
-static void __cpuinit virt_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
struct smp_operations __initdata virt_smp_ops = {
.smp_init_cpus = virt_smp_init_cpus,
.smp_prepare_cpus = virt_smp_prepare_cpus,
- .smp_secondary_init = virt_secondary_init,
.smp_boot_secondary = virt_boot_secondary,
};
{
struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+ gfp_t gfp = GFP_KERNEL | GFP_DMA;
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
atomic_pool_init);
else
- ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
- &page, atomic_pool_init);
+ ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
+ atomic_pool_init);
if (ptr) {
int i;
/* x = ((*(frame + k)) & 0xf) << 2; */
ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
/* the interpreter should deal with the negative K */
- if (k < 0)
+ if ((int)k < 0)
return -1;
/* offset in r1: we might have to take the slow path */
emit_mov_i(r_off, k, ctx);
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-obj-y += addr-map.o
+obj-$(CONFIG_ARCH_MVEBU) += addr-map.o
+obj-$(CONFIG_ARCH_KIRKWOOD) += addr-map.o
+obj-$(CONFIG_ARCH_DOVE) += addr-map.o
+obj-$(CONFIG_ARCH_ORION5X) += addr-map.o
+obj-$(CONFIG_ARCH_MV78XX0) += addr-map.o
orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
/*
- * Chip select enabled?
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
*/
- if (size & 1) {
+ if ((size & 1) && !(base & 0xF)) {
struct mbus_dram_window *w;
w = &orion_mbus_dram_info.cs[cs++];
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
* WIN[0-3] -> DRAM bank[0-3]
*/
-static void __init orion_pcie_setup_wins(void __iomem *base,
- struct mbus_dram_target_info *dram)
+static void __init orion_pcie_setup_wins(void __iomem *base)
{
+ const struct mbus_dram_target_info *dram;
u32 size;
int i;
+ dram = mv_mbus_dram_info();
+
/*
* First, disable and clear BARs and windows.
*/
*/
size = 0;
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i));
writel(0, base + PCIE_WIN04_REMAP_OFF(i));
/*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
- orion_pcie_setup_wins(base, &orion_mbus_dram_info);
+ orion_pcie_setup_wins(base);
/*
* Master + slave enable.
comment "Boot options"
-config S3C_BOOT_WATCHDOG
- bool "S3C Initialisation watchdog"
- depends on S3C2410_WATCHDOG
- help
- Say y to enable the watchdog during the kernel decompression
- stage. If the kernel fails to uncompress, then the watchdog
- will trigger a reset and the system should restart.
-
config S3C_BOOT_ERROR_RESET
bool "S3C Reboot on decompression error"
help
configuration. GPIOlib shall be compiled only for S3C64XX and S5P
series of processors.
-config S3C_GPIO_CFG_S3C64XX
- bool
- help
- Internal configuration to enable S3C64XX style GPIO configuration
- functions.
-
config S5P_GPIO_DRVSTR
bool
help
struct device *dev, char *ch_name)
{
dma_cap_mask_t mask;
- void *filter_param;
dma_cap_zero(mask);
dma_cap_set(param->cap, mask);
- /*
- * If a dma channel property of a device node from device tree is
- * specified, use that as the fliter parameter.
- */
- filter_param = (dma_ch == DMACH_DT_PROP) ?
- (void *)param->dt_dmach_prop : (void *)dma_ch;
-
if (dev->of_node)
return (unsigned)dma_request_slave_channel(dev, ch_name);
else
return (unsigned)dma_request_channel(mask, pl330_filter,
- filter_param);
+ (void *)dma_ch);
}
static int samsung_dmadev_release(unsigned ch, void *param)
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
struct samsung_dma_req {
enum dma_transaction_type cap;
- struct property *dt_dmach_prop;
struct s3c2410_dma_client *client;
};
* use these just as IDs.
*/
enum dma_ch {
- DMACH_DT_PROP = -1,
DMACH_UART0_RX = 0,
DMACH_UART0_TX,
DMACH_UART1_RX,
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void s3c_irqsub_mask(unsigned int irqno,
- unsigned int parentbit,
- int subcheck)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
- /* check to see if we need to mask the parent IRQ */
-
- if ((submask & subcheck) == subcheck)
- __raw_writel(mask | parentbit, S3C2410_INTMSK);
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void s3c_irqsub_unmask(unsigned int irqno,
- unsigned int parentbit)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
- mask &= ~parentbit;
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void s3c_irqsub_maskack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- s3c_irqsub_mask(irqno, parentmask, group);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-static inline void s3c_irqsub_ack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
/* re-define device name depending on support. */
static inline void s3c_rtc_setname(char *name)
{
-#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
+#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
s3c_device_rtc.name = name;
#endif
}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern int s3c2410_init(void);
-extern int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern int s3c2412_baseclk_add(void);
-
-extern void s3c2412_restart(char mode, const char *cmd);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#define s3c2412_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern int s3c2416_baseclk_add(void);
-
-extern void s3c2416_restart(char mode, const char *cmd);
-
-extern void s3c2416_init_irq(void);
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#define s3c2416_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern int s3c2443_baseclk_add(void);
-
-extern void s3c2443_restart(char mode, const char *cmd);
-
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#define s3c2443_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
/* S5P64X0 SDHCI setup */
-#ifdef CONFIG_S5P64X0_SETUP_SDHCI
+#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO
static inline void s5p64x0_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5p6440_default_sdhci2(void) { }
static inline void s5p6450_default_sdhci2(void) { }
-#endif /* CONFIG_S5P64X0_SETUP_SDHCI */
+#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */
/* S5PC100 SDHCI setup */
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/io.h>
#include <mach/map.h>
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
-#include <asm/mach/irq.h>
-
static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
-#include <asm/mach/irq.h>
-
#define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
#define CON_OFFSET 0x700
config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
- select ARCH_HAVE_CPUFREQ
+ select ARCH_HAS_CPUFREQ
select ARM_GIC
select CPU_V7
select GPIO_SPEAR_SPICS
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
void __cpuinit versatile_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
select CLONE_BACKWARDS
select COMMON_CLK
select GENERIC_CLOCKEVENTS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
bool
default y
-config DEBUG_ERRORS
- bool "Verbose kernel error messages"
- depends on DEBUG_KERNEL
- help
- This option controls verbose debugging information which can be
- printed when the kernel detects an internal error. This debugging
- information is useful to kernel hackers when tracking down problems,
- but mostly meaningless to other people. It's safe to say Y unless
- you are concerned with the code size or don't want to see these
- messages.
-
config DEBUG_STACK_USAGE
bool "Enable stack utilization instrumentation"
depends on DEBUG_KERNEL
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_DEBUG_ERRORS=y
stack_t uc_stack;
sigset_t uc_sigmask;
/* glibc uses a 1024-bit sigset_t */
- __u8 __unused[(1024 - sizeof(sigset_t)) / 8];
+ __u8 __unused[1024 / 8 - sizeof(sigset_t)];
/* last for future expansion */
struct sigcontext uc_mcontext;
};
EXPORT_SYMBOL(__clear_user);
/* bitops */
+#ifdef CONFIG_SMP
EXPORT_SYMBOL(__atomic_hash);
+#endif
/* physical memory */
EXPORT_SYMBOL(memstart_addr);
sigset_t *set, struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame;
- compat_stack_t stack;
int err = 0;
frame = compat_get_sigframe(ka, regs, sizeof(*frame));
void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt)
{
unsigned long size, mask;
- bool page64k = IS_ENABLED(ARM64_64K_PAGES);
+ bool page64k = IS_ENABLED(CONFIG_ARM64_64K_PAGES);
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
select HAVE_PERF_EVENTS
select HAVE_UID16
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_VIRT_CPU_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
}
if (!need_resched()) {
- void (*idle)(void);
#ifdef CONFIG_SMP
min_xtp();
#endif
if (mark_idle)
(*mark_idle)(1);
- if (!idle)
- idle = default_idle;
- (*idle)();
+ default_idle();
if (mark_idle)
(*mark_idle)(0);
#ifdef CONFIG_SMP
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_DEBUG_BUGVERBOSE
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
long long st_size;
unsigned long st_blksize;
-#if defined(__BIG_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
unsigned long __pad4; /* future possible st_blocks high bits */
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-#elif defined(__LITTLE_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long __pad4; /* future possible st_blocks high bits */
#else
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES
select GENERIC_STRNCPY_FROM_USER if MMU
config SOM5282EM
bool "EMAC.Inc SOM5282EM board support"
depends on M528x
- select EMAC_INC
help
Support for the EMAC.Inc SOM5282EM module.
/*
* Here go the bitmasks themselves
*/
-#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
+#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */
#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
#define IWR_ADDR 0xfffff308
#define IWR LONG_REF(IWR_ADDR)
-#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
#define ISR_ADDR 0xfffff30c
#define ISR LONG_REF(ISR_ADDR)
-#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
#define IPR_ADDR 0xfffff310
#define IPR LONG_REF(IPR_ADDR)
-#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
/* 'EZ328-compatible definitions */
#define TCN_ADDR TCN1_ADDR
-#define TCN TCN
+#define TCN TCN1
/*
* Timer Unit 1 and 2 Status Registers
void (*mach_halt)(void);
void (*mach_power_off)(void);
+#ifdef CONFIG_M68000
+#define CPU_NAME "MC68000"
+#endif
#ifdef CONFIG_M68328
#define CPU_NAME "MC68328"
#endif
}
}
-#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+#if defined(CONFIG_MMU) && !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
/* insert pointer tables allocated so far into the tablelist */
init_pointer_table((unsigned long)kernel_pg_dir);
for (i = 0; i < PTRS_PER_PGD; i++) {
u8 port;
/* make sure PUAPAR is set for UART0 and UART1 */
- port = readb(MCF5282_GPIO_PUAPAR);
+ port = readb(MCFGPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
writeb(port, MCFGPIO_PUAPAR);
}
select HAVE_DEBUG_KMEMLEAK
select IRQ_DOMAIN
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL if MODULES
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select CLONE_BACKWARDS
select HAVE_ARCH_KGDB
select GENERIC_ATOMIC64
select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3
select OF_EARLY_FLATTREE
select IRQ_DOMAIN
select HAVE_MEMBLOCK
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_STRNCPY_FROM_USER
select SYSCTL_ARCH_UNALIGN_ALLOW
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
select TTY # Needed for pdc_cons.c
config PPC
bool
default y
+ select BINFMT_ELF
select OF
select OF_EARLY_FLATTREE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select SYSCTL_EXCEPTION_TRACE
select ARCH_WANT_OPTIONAL_GPIOLIB
- select HAVE_VIRT_TO_BUS if !PPC64
+ select VIRT_TO_BUS if !PPC64
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
/*
* VSID allocation (256MB segment)
*
- * We first generate a 38-bit "proto-VSID". For kernel addresses this
- * is equal to the ESID | 1 << 37, for user addresses it is:
- * (context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
+ * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
+ * from mmu context id and effective segment id of the address.
*
- * This splits the proto-VSID into the below range
- * 0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
- * 2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
- *
- * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
- * That is, we assign half of the space to user processes and half
- * to the kernel.
+ * For user processes max context id is limited to ((1ul << 19) - 5)
+ * for kernel space, we use the top 4 context ids to map address as below
+ * NOTE: each context only support 64TB now.
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
*
* The proto-VSIDs are then scrambled into real VSIDs with the
* multiplicative hash:
* VSID_MULTIPLIER is prime, so in particular it is
* co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
* Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- * - We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
+ * a divide or extra multiply (see below). The scramble function gives
+ * robust scattering in the hash table (at least based on some initial
+ * results).
*
- * - We allow for USER_ESID_BITS significant bits of ESID and
- * CONTEXT_BITS bits of context for user addresses.
- * i.e. 64T (46 bits) of address space for up to half a million contexts.
+ * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
+ * bad address. This enables us to consolidate bad address handling in
+ * hash_page.
*
- * - The scramble function gives robust scattering in the hash
- * table (at least based on some initial results). The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble. But the vmemmap
+ * (which is what uses region 0xf) will never be close to 64TB in size
+ * (it's 56 bytes per page of system memory).
*/
+#define CONTEXT_BITS 19
+#define ESID_BITS 18
+#define ESID_BITS_1T 6
+
+/*
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
+ * available for user + kernel mapping. The top 4 contexts are used for
+ * kernel mapping. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
+ */
+#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 5)
+
/*
* This should be computed such that protovosid * vsid_mulitplier
* doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
*/
#define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_256M 38
+#define VSID_BITS_256M (CONTEXT_BITS + ESID_BITS)
#define VSID_MODULUS_256M ((1UL<<VSID_BITS_256M)-1)
#define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_1T 26
+#define VSID_BITS_1T (CONTEXT_BITS + ESID_BITS_1T)
#define VSID_MODULUS_1T ((1UL<<VSID_BITS_1T)-1)
-#define CONTEXT_BITS 19
-#define USER_ESID_BITS 18
-#define USER_ESID_BITS_1T 6
-#define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT))
+#define USER_VSID_RANGE (1UL << (ESID_BITS + SID_SHIFT))
/*
* This macro generates asm code to compute the VSID scramble
srdi rx,rt,VSID_BITS_##size; \
clrldi rt,rt,(64-VSID_BITS_##size); \
add rt,rt,rx; /* add high and low bits */ \
- /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
+ /* NOTE: explanation based on VSID_BITS_##size = 36 \
+ * Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
* 2^36-1+2^28-1. That in particular means that if r3 >= \
* 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \
* the bit clear, r3 already has the answer we want, if it \
})
#endif /* 1 */
-/*
- * This is only valid for addresses >= PAGE_OFFSET
- * The proto-VSID space is divided into two class
- * User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
- * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
- *
- * With KERNEL_START at 0xc000000000000000, the proto vsid for
- * the kernel ends up with 0xc00000000 (36 bits). With 64TB
- * support we need to have kernel proto-VSID in the
- * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
- */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
- unsigned long proto_vsid;
- /*
- * We need to make sure proto_vsid for the kernel is
- * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
- */
- if (ssize == MMU_SEGSIZE_256M) {
- proto_vsid = ea >> SID_SHIFT;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
- return vsid_scramble(proto_vsid, 256M);
- }
- proto_vsid = ea >> SID_SHIFT_1T;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
- return vsid_scramble(proto_vsid, 1T);
-}
-
/* Returns the segment size indicator for a user address */
static inline int user_segment_size(unsigned long addr)
{
return MMU_SEGSIZE_256M;
}
-/* This is only valid for user addresses (which are below 2^44) */
static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
int ssize)
{
+ /*
+ * Bad address. We return VSID 0 for that
+ */
+ if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
+ return 0;
+
if (ssize == MMU_SEGSIZE_256M)
- return vsid_scramble((context << USER_ESID_BITS)
+ return vsid_scramble((context << ESID_BITS)
| (ea >> SID_SHIFT), 256M);
- return vsid_scramble((context << USER_ESID_BITS_1T)
+ return vsid_scramble((context << ESID_BITS_1T)
| (ea >> SID_SHIFT_1T), 1T);
}
+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ *
+ * For kernel space, we use the top 4 context ids to map address as below
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+ unsigned long context;
+
+ /*
+ * kernel take the top 4 context from the available range
+ */
+ context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+ return get_vsid(context, ea, ssize);
+}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
#include <asm/code-patching.h>
#include <asm/machdep.h>
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
extern void epapr_ev_idle(void);
extern u32 epapr_ev_idle_start[];
+#endif
bool epapr_paravirt_enabled;
for (i = 0; i < (len / 4); i++) {
patch_instruction(epapr_hypercall_start + i, insts[i]);
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
patch_instruction(epapr_ev_idle_start + i, insts[i]);
+#endif
}
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
if (of_get_property(hyper_node, "has-idle", NULL))
ppc_md.power_save = epapr_ev_idle;
+#endif
epapr_paravirt_enabled = true;
#endif /* __DISABLED__ */
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-#ifdef CONFIG_RELOCATABLE
- mtctr r11
-#endif
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- 2f
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
- RESTORE_PPR_PACA(PACA_EXSLB, r9)
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-2: mfspr r11,SPRN_SRR0
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10,unrecov_slb)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b .
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
- andc r9,r9,r10
- std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
- blr
-#endif
-
.align 7
.globl alignment_common
alignment_common:
#endif /* CONFIG_PPC_POWERNV */
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- 2f
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+ RESTORE_PPR_PACA(PACA_EXSLB, r9)
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+2: mfspr r11,SPRN_SRR0
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
/*
* Hash table stuff
*/
_GLOBAL(do_stab_bolted)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+ mfspr r11,SPRN_DAR /* ea */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r11,4,(63 - 46 - 4)
+ li r9,0 /* VSID = 0 for bad address */
+ bne- 0f
+
+ /*
+ * Calculate VSID:
+ * This is the kernel vsid, we take the top for context from
+ * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * Here we know that (ea >> 60) == 0xc
+ */
+ lis r9,(MAX_USER_CONTEXT + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT + 1)@l
+
+ srdi r10,r11,SID_SHIFT
+ rldimi r10,r9,ESID_BITS,0 /* proto vsid */
+ ASM_VSID_SCRAMBLE(r10, r9, 256M)
+ rldic r9,r10,12,16 /* r9 = vsid << 12 */
+
+0:
/* Hash to the primary group */
ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
+ srdi r11,r11,SID_SHIFT
rldimi r10,r11,7,52 /* r10 = first ste of the group */
- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID | 1 << 37 */
- li r9,0x1
- rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
- ASM_VSID_SCRAMBLE(r11, r9, 256M)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
/* Search the primary group for a free entry */
1: ld r11,0(r10) /* Test valid bit of the current ste */
andi. r11,r11,0x80
{
}
#else
-static void __reloc_toc(void *tocstart, unsigned long offset,
- unsigned long nr_entries)
+static void __reloc_toc(unsigned long offset, unsigned long nr_entries)
{
unsigned long i;
- unsigned long *toc_entry = (unsigned long *)tocstart;
+ unsigned long *toc_entry;
+
+ /* Get the start of the TOC by using r2 directly. */
+ asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry));
for (i = 0; i < nr_entries; i++) {
*toc_entry = *toc_entry + offset;
unsigned long nr_entries =
(__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
- /* Need to add offset to get at __prom_init_toc_start */
- __reloc_toc(__prom_init_toc_start + offset, offset, nr_entries);
+ __reloc_toc(offset, nr_entries);
mb();
}
mb();
- /* __prom_init_toc_start has been relocated, no need to add offset */
- __reloc_toc(__prom_init_toc_start, -offset, nr_entries);
+ __reloc_toc(-offset, nr_entries);
}
#endif
#endif
brk.address = bp_info->addr & ~7UL;
brk.type = HW_BRK_TYPE_TRANSLATE;
+ brk.len = 8;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
brk.type |= HW_BRK_TYPE_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
vcpu3s->context_id[0] = err;
vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
- << USER_ESID_BITS) - 1;
- vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+ << ESID_BITS) - 1;
+ vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS;
vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
kvmppc_mmu_hpte_init(vcpu);
unsigned long vpn = hpt_vpn(vaddr, vsid, ssize);
unsigned long tprot = prot;
+ /*
+ * If we hit a bad address return error.
+ */
+ if (!vsid)
+ return -1;
/* Make kernel text executable */
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
/* Initialize stab / SLB management */
if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
+ else
+ stab_initialize(get_paca()->stab_real);
}
#ifdef CONFIG_SMP
DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
ea, access, trap);
- if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
- DBG_LOW(" out of pgtable range !\n");
- return 1;
- }
-
/* Get region & vsid */
switch (REGION_ID(ea)) {
case USER_REGION_ID:
}
DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
+ /* Bad address. */
+ if (!vsid) {
+ DBG_LOW("Bad address!\n");
+ return 1;
+ }
/* Get pgdir */
pgdir = mm->pgd;
if (pgdir == NULL)
/* Get VSID */
ssize = user_segment_size(ea);
vsid = get_vsid(mm->context.id, ea, ssize);
+ if (!vsid)
+ return;
/* Hash doesn't like irqs */
local_irq_save(flags);
hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+ /* Don't create HPTE entries for bad address */
+ if (!vsid)
+ return;
ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
mode, HPTE_V_BOLTED,
mmu_linear_psize, mmu_kernel_ssize);
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
-/*
- * 256MB segment
- * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
- * available for user mappings. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
- */
-#define MAX_CONTEXT ((1UL << CONTEXT_BITS) - 1)
-
int __init_new_context(void)
{
int index;
else if (err)
return err;
- if (index > MAX_CONTEXT) {
+ if (index > MAX_USER_CONTEXT) {
spin_lock(&mmu_context_lock);
ida_remove(&mmu_context_ida, index);
spin_unlock(&mmu_context_lock);
#endif
#ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
#endif
* No other registers are examined or changed.
*/
_GLOBAL(slb_allocate_realmode)
- /* r3 = faulting address */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r3,4,(63 - 46 - 4)
+ bne- 8f
srdi r9,r3,60 /* get region */
- srdi r10,r3,28 /* get esid */
+ srdi r10,r3,SID_SHIFT /* get esid */
cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */
/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
*/
_GLOBAL(slb_miss_kernel_load_linear)
li r11,0
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
_GLOBAL(slb_miss_kernel_load_io)
li r11,0
6:
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
b slb_finish_load_1T
-0: /* user address: proto-VSID = context << 15 | ESID. First check
- * if the address is within the boundaries of the user region
- */
- srdi. r9,r10,USER_ESID_BITS
- bne- 8f /* invalid ea bits set */
-
-
+0:
/* when using slices, we extract the psize off the slice bitmaps
* and then we need to get the sllp encoding off the mmu_psize_defs
* array.
ld r9,PACACONTEXTID(r13)
BEGIN_FTR_SECTION
cmpldi r10,0x1000
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
- rldimi r10,r9,USER_ESID_BITS,0
-BEGIN_FTR_SECTION
bge slb_finish_load_1T
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
b slb_finish_load
8: /* invalid EA */
li r10,0 /* BAD_VSID */
+ li r9,0 /* BAD_VSID */
li r11,SLB_VSID_USER /* flags don't much matter */
b slb_finish_load
/* get context to calculate proto-VSID */
ld r9,PACACONTEXTID(r13)
- rldimi r10,r9,USER_ESID_BITS,0
-
/* fall through slb_finish_load */
#endif /* __DISABLED__ */
/*
* Finish loading of an SLB entry and return
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
+ * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
*/
slb_finish_load:
+ rldimi r10,r9,ESID_BITS,0
ASM_VSID_SCRAMBLE(r10,r9,256M)
/*
* bits above VSID_BITS_256M need to be ignored from r10
/*
* Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9
+ * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
*/
slb_finish_load_1T:
- srdi r10,r10,40-28 /* get 1T ESID */
+ srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */
+ rldimi r10,r9,ESID_BITS_1T,0
ASM_VSID_SCRAMBLE(r10,r9,1T)
/*
* bits above VSID_BITS_1T need to be ignored from r10
if (!is_kernel_addr(addr)) {
ssize = user_segment_size(addr);
vsid = get_vsid(mm->context.id, addr, ssize);
- WARN_ON(vsid == 0);
} else {
vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
ssize = mmu_kernel_ssize;
}
+ WARN_ON(vsid == 0);
vpn = hpt_vpn(addr, vsid, ssize);
rpte = __real_pte(__pte(pte), ptep);
.attrs = power7_events_attr,
};
+PMU_FORMAT_ATTR(event, "config:0-19");
+
+static struct attribute *power7_pmu_format_attr[] = {
+ &format_attr_event.attr,
+ NULL,
+};
+
+struct attribute_group power7_pmu_format_group = {
+ .name = "format",
+ .attrs = power7_pmu_format_attr,
+};
+
static const struct attribute_group *power7_pmu_attr_groups[] = {
+ &power7_pmu_format_group,
&power7_pmu_events_group,
NULL,
};
return IRQ_HANDLED;
};
-static int __devinit gpio_halt_probe(struct platform_device *pdev)
+static int gpio_halt_probe(struct platform_device *pdev)
{
enum of_gpio_flags flags;
struct device_node *node = pdev->dev.of_node;
return 0;
}
-static int __devexit gpio_halt_remove(struct platform_device *pdev)
+static int gpio_halt_remove(struct platform_device *pdev)
{
if (halt_node) {
int gpio = of_get_gpio(halt_node, 0);
.of_match_table = gpio_halt_match,
},
.probe = gpio_halt_probe,
- .remove = __devexit_p(gpio_halt_remove),
+ .remove = gpio_halt_remove,
};
module_platform_driver(gpio_halt_driver);
select PPC_HAVE_PMU_SUPPORT
config POWER3
- bool
depends on PPC64 && PPC_BOOK3S
- default y if !POWER4_ONLY
+ def_bool y
config POWER4
depends on PPC64 && PPC_BOOK3S
but somewhat slower on other machines. This option only changes
the scheduling of instructions, not the selection of instructions
itself, so the resulting kernel will keep running on all other
- machines. When building a kernel that is supposed to run only
- on Cell, you should also select the POWER4_ONLY option.
+ machines.
# this is temp to handle compat with arch=ppc
config 8xx
select HAVE_SYSCALL_WRAPPERS
select HAVE_UID16 if 32BIT
select HAVE_VIRT_CPU_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select INIT_ALL_POSSIBLE
select KTIME_SCALAR if 32BIT
select MODULES_USE_ELF_RELA
#ifndef _ASM_S390_CPU_MF_H
#define _ASM_S390_CPU_MF_H
+#include <linux/errno.h>
#include <asm/facility.h>
#define CPU_MF_INT_SF_IAE (1 << 31) /* invalid entry address */
u32 reserved[4];
} __packed;
+#define EQC_WR_PROHIBIT 22
+
struct msb {
u8 fmt:4;
u8 oc:4;
#define OP_STATE_TEMP_ERR 2
#define OP_STATE_PERM_ERR 3
+enum scm_event {SCM_CHANGE, SCM_AVAIL};
+
struct scm_driver {
struct device_driver drv;
int (*probe) (struct scm_device *scmdev);
int (*remove) (struct scm_device *scmdev);
- void (*notify) (struct scm_device *scmdev);
+ void (*notify) (struct scm_device *scmdev, enum scm_event event);
void (*handler) (struct scm_device *scmdev, void *data, int error);
};
static inline void __tlb_flush_mm(struct mm_struct * mm)
{
- if (unlikely(cpumask_empty(mm_cpumask(mm))))
- return;
/*
* If the machine has IDTE we prefer to do a per mm flush
* on all cpus instead of doing a local flush if the mm
UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
mcck_skip:
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
- mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
+ stm %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
stm %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
l %r1,BASED(.Ldo_machine_check)
UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
LAST_BREAK %r14
mcck_skip:
- lghi %r14,__LC_GPREGS_SAVE_AREA
- mvc __PT_R0(128,%r11),0(%r14)
+ lghi %r14,__LC_GPREGS_SAVE_AREA+64
+ stmg %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
/* Split remaining virtual space between 1:1 mapping & vmemmap array */
tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
+ /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
+ tmp = SECTION_ALIGN_UP(tmp);
tmp = VMALLOC_START - tmp * sizeof(struct page);
tmp &= ~((vmax >> 11) - 1); /* align to page table level */
tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);
select GENERIC_CPU_DEVICES
select GENERIC_CLOCKEVENTS
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL
select CLONE_BACKWARDS
default "arch/sparc/configs/sparc32_defconfig" if SPARC32
default "arch/sparc/configs/sparc64_defconfig" if SPARC64
-# CONFIG_BITS can be used at source level to get 32/64 bits
-config BITS
- int
- default 32 if SPARC32
- default 64 if SPARC64
-
config IOMMU_HELPER
bool
default y if SPARC64
config GENERIC_HWEIGHT
bool
- default y if !ULTRA_HAS_POPULATION_COUNT
+ default y
config GENERIC_CALIBRATE_DELAY
bool
#define SUN4V_CHIP_NIAGARA3 0x03
#define SUN4V_CHIP_NIAGARA4 0x04
#define SUN4V_CHIP_NIAGARA5 0x05
+#define SUN4V_CHIP_SPARC64X 0x8a
#define SUN4V_CHIP_UNKNOWN 0xff
#ifndef __ASSEMBLY__
sparc_pmu_type = "niagara5";
break;
+ case SUN4V_CHIP_SPARC64X:
+ sparc_cpu_type = "SPARC64-X";
+ sparc_fpu_type = "SPARC64-X integrated FPU";
+ sparc_pmu_type = "sparc64-x";
+ break;
+
default:
printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
prom_cpu_compatible);
.asciz "SUNW,UltraSPARC-T"
prom_sparc_prefix:
.asciz "SPARC-"
+prom_sparc64x_prefix:
+ .asciz "SPARC64-X"
.align 4
prom_root_compatible:
.skip 64
cmp %g2, 'T'
be,pt %xcc, 70f
cmp %g2, 'M'
- bne,pn %xcc, 4f
+ bne,pn %xcc, 49f
nop
70: ldub [%g1 + 7], %g2
cmp %g2, '5'
be,pt %xcc, 5f
mov SUN4V_CHIP_NIAGARA5, %g4
- ba,pt %xcc, 4f
+ ba,pt %xcc, 49f
nop
91: sethi %hi(prom_cpu_compatible), %g1
mov SUN4V_CHIP_NIAGARA2, %g4
4:
+ /* Athena */
+ sethi %hi(prom_cpu_compatible), %g1
+ or %g1, %lo(prom_cpu_compatible), %g1
+ sethi %hi(prom_sparc64x_prefix), %g7
+ or %g7, %lo(prom_sparc64x_prefix), %g7
+ mov 9, %g3
+41: ldub [%g7], %g2
+ ldub [%g1], %g4
+ cmp %g2, %g4
+ bne,pn %icc, 49f
+ add %g7, 1, %g7
+ subcc %g3, 1, %g3
+ bne,pt %xcc, 41b
+ add %g1, 1, %g1
+ mov SUN4V_CHIP_SPARC64X, %g4
+ ba,pt %xcc, 5f
+ nop
+
+49:
mov SUN4V_CHIP_UNKNOWN, %g4
5: sethi %hi(sun4v_chip_type), %g2
or %g2, %lo(sun4v_chip_type), %g2
#define CAP9_IOMAP_OFS 0x20
#define CAP9_BARSIZE_OFS 0x24
+#define TGT 256
+
struct grpci2_priv {
struct leon_pci_info info; /* must be on top of this structure */
struct grpci2_regs *regs;
if (where & 0x3)
return -EINVAL;
- if (bus == 0 && PCI_SLOT(devfn) != 0)
- devfn += (0x8 * 6);
+ if (bus == 0) {
+ devfn += (0x8 * 6); /* start at AD16=Device0 */
+ } else if (bus == TGT) {
+ bus = 0;
+ devfn = 0; /* special case: bridge controller itself */
+ }
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
if (where & 0x3)
return -EINVAL;
- if (bus == 0 && PCI_SLOT(devfn) != 0)
- devfn += (0x8 * 6);
+ if (bus == 0) {
+ devfn += (0x8 * 6); /* start at AD16=Device0 */
+ } else if (bus == TGT) {
+ bus = 0;
+ devfn = 0; /* special case: bridge controller itself */
+ }
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
unsigned int busno = bus->number;
int ret;
- if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+ if (PCI_SLOT(devfn) > 15 || busno > 255) {
*val = ~0;
return 0;
}
struct grpci2_priv *priv = grpci2priv;
unsigned int busno = bus->number;
- if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+ if (PCI_SLOT(devfn) > 15 || busno > 255)
return 0;
#ifdef GRPCI2_DEBUG_CFGACCESS
REGSTORE(regs->ahbmst_map[i], priv->pci_area);
/* Get the GRPCI2 Host PCI ID */
- grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+ grpci2_cfg_r32(priv, TGT, 0, PCI_VENDOR_ID, &priv->pciid);
/* Get address to first (always defined) capability structure */
- grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+ grpci2_cfg_r8(priv, TGT, 0, PCI_CAPABILITY_LIST, &capptr);
/* Enable/Disable Byte twisting */
- grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+ grpci2_cfg_r32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, &io_map);
io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
- grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+ grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, io_map);
/* Setup the Host's PCI Target BARs for other peripherals to access,
* and do DMA to the host's memory. The target BARs can be sized and
pciadr = 0;
}
}
- grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
- grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
- grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+ grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BARSIZE_OFS+i*4,
+ bar_sz);
+ grpci2_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+ grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
i, pciadr, ahbadr);
}
/* set as bus master and enable pci memory responses */
- grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+ grpci2_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+ grpci2_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
/* Enable Error respone (CPU-TRAP) on illegal memory access. */
REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select HAVE_SYSCALL_WRAPPERS if TILEGX
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select SYS_HYPERVISOR
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CLOCKEVENTS
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MULTICORE_RAID456=y
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MULTICORE_RAID456=y
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
extern int console_open_chan(struct line *line, struct console *co);
extern void deactivate_chan(struct chan *chan, int irq);
extern void reactivate_chan(struct chan *chan, int irq);
-extern void chan_enable_winch(struct chan *chan, struct tty_struct *tty);
+extern void chan_enable_winch(struct chan *chan, struct tty_port *port);
extern int enable_chan(struct line *line);
extern void close_chan(struct line *line);
extern int chan_window_size(struct line *line,
return err;
}
-void chan_enable_winch(struct chan *chan, struct tty_struct *tty)
+void chan_enable_winch(struct chan *chan, struct tty_port *port)
{
if (chan && chan->primary && chan->ops->winch)
- register_winch(chan->fd, tty);
+ register_winch(chan->fd, port);
}
static void line_timer_cb(struct work_struct *work)
}
}
-static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out,
+static int winch_tramp(int fd, struct tty_port *port, int *fd_out,
unsigned long *stack_out)
{
struct winch_data data;
return err;
}
-void register_winch(int fd, struct tty_struct *tty)
+void register_winch(int fd, struct tty_port *port)
{
unsigned long stack;
int pid, thread, count, thread_fd = -1;
return;
pid = tcgetpgrp(fd);
- if (is_skas_winch(pid, fd, tty)) {
- register_winch_irq(-1, fd, -1, tty, 0);
+ if (is_skas_winch(pid, fd, port)) {
+ register_winch_irq(-1, fd, -1, port, 0);
return;
}
if (pid == -1) {
- thread = winch_tramp(fd, tty, &thread_fd, &stack);
+ thread = winch_tramp(fd, port, &thread_fd, &stack);
if (thread < 0)
return;
- register_winch_irq(thread_fd, fd, thread, tty, stack);
+ register_winch_irq(thread_fd, fd, thread, port, stack);
count = write(thread_fd, &c, sizeof(c));
if (count != sizeof(c))
unsigned short *cols_out);
extern void generic_free(void *data);
-struct tty_struct;
-extern void register_winch(int fd, struct tty_struct *tty);
+struct tty_port;
+extern void register_winch(int fd, struct tty_port *port);
extern void register_winch_irq(int fd, int tty_fd, int pid,
- struct tty_struct *tty, unsigned long stack);
+ struct tty_port *port, unsigned long stack);
#define __channel_help(fn, prefix) \
__uml_help(fn, prefix "[0-9]*=<channel description>\n" \
return ret;
if (!line->sigio) {
- chan_enable_winch(line->chan_out, tty);
+ chan_enable_winch(line->chan_out, port);
line->sigio = 1;
}
return 0;
}
+static void unregister_winch(struct tty_struct *tty);
+
+static void line_destruct(struct tty_port *port)
+{
+ struct tty_struct *tty = tty_port_tty_get(port);
+ struct line *line = tty->driver_data;
+
+ if (line->sigio) {
+ unregister_winch(tty);
+ line->sigio = 0;
+ }
+}
+
static const struct tty_port_operations line_port_ops = {
.activate = line_activate,
+ .destruct = line_destruct,
};
int line_open(struct tty_struct *tty, struct file *filp)
return 0;
}
-static void unregister_winch(struct tty_struct *tty);
-
-void line_cleanup(struct tty_struct *tty)
-{
- struct line *line = tty->driver_data;
-
- if (line->sigio) {
- unregister_winch(tty);
- line->sigio = 0;
- }
-}
-
void line_close(struct tty_struct *tty, struct file * filp)
{
struct line *line = tty->driver_data;
int fd;
int tty_fd;
int pid;
- struct tty_struct *tty;
+ struct tty_port *port;
unsigned long stack;
struct work_struct work;
};
goto out;
}
}
- tty = winch->tty;
+ tty = tty_port_tty_get(winch->port);
if (tty != NULL) {
line = tty->driver_data;
if (line != NULL) {
&tty->winsize.ws_col);
kill_pgrp(tty->pgrp, SIGWINCH, 1);
}
+ tty_kref_put(tty);
}
out:
if (winch->fd != -1)
return IRQ_HANDLED;
}
-void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty,
+void register_winch_irq(int fd, int tty_fd, int pid, struct tty_port *port,
unsigned long stack)
{
struct winch *winch;
.fd = fd,
.tty_fd = tty_fd,
.pid = pid,
- .tty = tty,
+ .port = port,
.stack = stack });
if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
{
struct list_head *ele, *next;
struct winch *winch;
+ struct tty_struct *wtty;
spin_lock(&winch_handler_lock);
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
- if (winch->tty == tty) {
+ wtty = tty_port_tty_get(winch->port);
+ if (wtty == tty) {
free_winch(winch);
break;
}
+ tty_kref_put(wtty);
}
spin_unlock(&winch_handler_lock);
}
spin_lock_irqsave(&lp->lock, flags);
len = (*lp->write)(lp->fd, skb, lp);
+ skb_tx_timestamp(skb);
if (len == skb->len) {
dev->stats.tx_packets++;
static const struct ethtool_ops uml_net_ethtool_ops = {
.get_drvinfo = uml_net_get_drvinfo,
.get_link = ethtool_op_get_link,
+ .get_ts_info = ethtool_op_get_ts_info,
};
static void uml_net_user_timer_expire(unsigned long _conn)
.throttle = line_throttle,
.unthrottle = line_unthrottle,
.install = ssl_install,
- .cleanup = line_cleanup,
.hangup = line_hangup,
};
.set_termios = line_set_termios,
.throttle = line_throttle,
.unthrottle = line_unthrottle,
- .cleanup = line_cleanup,
.hangup = line_hangup,
};
#include <sysdep/mcontext.h>
#include "internal.h"
-void (*sig_info[NSIG])(int, siginfo_t *, struct uml_pt_regs *) = {
+void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
[SIGTRAP] = relay_signal,
[SIGFPE] = relay_signal,
[SIGILL] = relay_signal,
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/wait.h>
+#include <sys/time.h>
+#include <sys/resource.h>
#include <asm/unistd.h>
#include <init.h>
#include <os.h>
select GENERIC_ATOMIC64
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
select GENERIC_STRNLEN_USER
select HAVE_CONTEXT_TRACKING if X86_64
select HAVE_IRQ_TIME_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL if X86_32
select MODULES_USE_ELF_RELA if X86_64
select CLONE_BACKWARDS if X86_32
* a post_handler or break_handler).
*/
int boostable;
+ bool if_modifier;
};
struct arch_optimized_insn {
gpa_t time;
struct pvclock_vcpu_time_info hv_clock;
unsigned int hw_tsc_khz;
- unsigned int time_offset;
- struct page *time_page;
+ struct gfn_to_hva_cache pv_time;
+ bool pv_time_enabled;
/* set guest stopped flag in pvclock flags field */
bool pvclock_set_guest_stopped_request;
return _hypercall3(int, console_io, cmd, count, str);
}
-extern int __must_check HYPERVISOR_physdev_op_compat(int, void *);
+extern int __must_check xen_physdev_op_compat(int, void *);
static inline int
HYPERVISOR_physdev_op(int cmd, void *arg)
{
int rc = _hypercall2(int, physdev_op, cmd, arg);
if (unlikely(rc == -ENOSYS))
- rc = HYPERVISOR_physdev_op_compat(cmd, arg);
+ rc = xen_physdev_op_compat(cmd, arg);
return rc;
}
#define SNB_C1_AUTO_UNDEMOTE (1UL << 27)
#define SNB_C3_AUTO_UNDEMOTE (1UL << 28)
+#define MSR_PLATFORM_INFO 0x000000ce
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
#define MSR_IA32_BBL_CR_CTL3 0x0000011e
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
+ INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_NO_DISPATCH */
+ INTEL_UEVENT_CONSTRAINT(0x05a3, 0xf), /* CYCLE_ACTIVITY.STALLS_L2_PENDING */
+ INTEL_UEVENT_CONSTRAINT(0x02a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */
+ INTEL_UEVENT_CONSTRAINT(0x06a3, 0x4), /* CYCLE_ACTIVITY.STALLS_L1D_PENDING */
INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */
INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */
}
}
}
+
+void perf_restore_debug_store(void)
+{
+ struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds);
+
+ if (!x86_pmu.bts && !x86_pmu.pebs)
+ return;
+
+ wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds);
+}
else
p->ainsn.boostable = -1;
+ /* Check whether the instruction modifies Interrupt Flag or not */
+ p->ainsn.if_modifier = is_IF_modifier(p->ainsn.insn);
+
/* Also, displacement change doesn't affect the first byte */
p->opcode = p->ainsn.insn[0];
}
__this_cpu_write(current_kprobe, p);
kcb->kprobe_saved_flags = kcb->kprobe_old_flags
= (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
- if (is_IF_modifier(p->ainsn.insn))
+ if (p->ainsn.if_modifier)
kcb->kprobe_saved_flags &= ~X86_EFLAGS_IF;
}
struct microcode_intel ***mc_saved;
mc_saved = (struct microcode_intel ***)
- __pa_symbol(&mc_saved_data->mc_saved);
+ __pa_nodebug(&mc_saved_data->mc_saved);
for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
struct microcode_intel *p;
p = *(struct microcode_intel **)
- __pa(mc_saved_data->mc_saved + i);
- mc_saved_tmp[i] = (struct microcode_intel *)__pa(p);
+ __pa_nodebug(mc_saved_data->mc_saved + i);
+ mc_saved_tmp[i] = (struct microcode_intel *)__pa_nodebug(p);
}
}
#endif
struct cpio_data cd;
long offset = 0;
#ifdef CONFIG_X86_32
- char *p = (char *)__pa_symbol(ucode_name);
+ char *p = (char *)__pa_nodebug(ucode_name);
#else
char *p = ucode_name;
#endif
if (mc_intel == NULL)
return;
- delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info);
- current_mc_date_p = (int *)__pa_symbol(¤t_mc_date);
+ delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
+ current_mc_date_p = (int *)__pa_nodebug(¤t_mc_date);
*delay_ucode_info_p = 1;
*current_mc_date_p = mc_intel->hdr.date;
}
#endif
-static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
- struct ucode_cpu_info *uci)
+static int __cpuinit apply_microcode_early(struct mc_saved_data *mc_saved_data,
+ struct ucode_cpu_info *uci)
{
struct microcode_intel *mc_intel;
unsigned int val[2];
#ifdef CONFIG_X86_32
struct boot_params *boot_params_p;
- boot_params_p = (struct boot_params *)__pa_symbol(&boot_params);
+ boot_params_p = (struct boot_params *)__pa_nodebug(&boot_params);
ramdisk_image = boot_params_p->hdr.ramdisk_image;
ramdisk_size = boot_params_p->hdr.ramdisk_size;
initrd_start_early = ramdisk_image;
initrd_end_early = initrd_start_early + ramdisk_size;
_load_ucode_intel_bsp(
- (struct mc_saved_data *)__pa_symbol(&mc_saved_data),
- (unsigned long *)__pa_symbol(&mc_saved_in_initrd),
+ (struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
+ (unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
initrd_start_early, initrd_end_early, &uci);
#else
ramdisk_image = boot_params.hdr.ramdisk_image;
unsigned long *initrd_start_p;
mc_saved_in_initrd_p =
- (unsigned long *)__pa_symbol(mc_saved_in_initrd);
- mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data);
- initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start);
- initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p);
+ (unsigned long *)__pa_nodebug(mc_saved_in_initrd);
+ mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
+ initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+ initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
#else
mc_saved_data_p = &mc_saved_data;
mc_saved_in_initrd_p = mc_saved_in_initrd;
unsigned long flags, this_tsc_khz;
struct kvm_vcpu_arch *vcpu = &v->arch;
struct kvm_arch *ka = &v->kvm->arch;
- void *shared_kaddr;
s64 kernel_ns, max_kernel_ns;
u64 tsc_timestamp, host_tsc;
- struct pvclock_vcpu_time_info *guest_hv_clock;
+ struct pvclock_vcpu_time_info guest_hv_clock;
u8 pvclock_flags;
bool use_master_clock;
kernel_ns = 0;
host_tsc = 0;
- /* Keep irq disabled to prevent changes to the clock */
- local_irq_save(flags);
- this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
- if (unlikely(this_tsc_khz == 0)) {
- local_irq_restore(flags);
- kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
- return 1;
- }
-
/*
* If the host uses TSC clock, then passthrough TSC as stable
* to the guest.
kernel_ns = ka->master_kernel_ns;
}
spin_unlock(&ka->pvclock_gtod_sync_lock);
+
+ /* Keep irq disabled to prevent changes to the clock */
+ local_irq_save(flags);
+ this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
+ if (unlikely(this_tsc_khz == 0)) {
+ local_irq_restore(flags);
+ kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
+ return 1;
+ }
if (!use_master_clock) {
host_tsc = native_read_tsc();
kernel_ns = get_kernel_ns();
local_irq_restore(flags);
- if (!vcpu->time_page)
+ if (!vcpu->pv_time_enabled)
return 0;
/*
*/
vcpu->hv_clock.version += 2;
- shared_kaddr = kmap_atomic(vcpu->time_page);
-
- guest_hv_clock = shared_kaddr + vcpu->time_offset;
+ if (unlikely(kvm_read_guest_cached(v->kvm, &vcpu->pv_time,
+ &guest_hv_clock, sizeof(guest_hv_clock))))
+ return 0;
/* retain PVCLOCK_GUEST_STOPPED if set in guest copy */
- pvclock_flags = (guest_hv_clock->flags & PVCLOCK_GUEST_STOPPED);
+ pvclock_flags = (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED);
if (vcpu->pvclock_set_guest_stopped_request) {
pvclock_flags |= PVCLOCK_GUEST_STOPPED;
vcpu->hv_clock.flags = pvclock_flags;
- memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock,
- sizeof(vcpu->hv_clock));
-
- kunmap_atomic(shared_kaddr);
-
- mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
+ kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+ &vcpu->hv_clock,
+ sizeof(vcpu->hv_clock));
return 0;
}
static void kvmclock_reset(struct kvm_vcpu *vcpu)
{
- if (vcpu->arch.time_page) {
- kvm_release_page_dirty(vcpu->arch.time_page);
- vcpu->arch.time_page = NULL;
- }
+ vcpu->arch.pv_time_enabled = false;
}
static void accumulate_steal_time(struct kvm_vcpu *vcpu)
break;
case MSR_KVM_SYSTEM_TIME_NEW:
case MSR_KVM_SYSTEM_TIME: {
+ u64 gpa_offset;
kvmclock_reset(vcpu);
vcpu->arch.time = data;
if (!(data & 1))
break;
- /* ...but clean it before doing the actual write */
- vcpu->arch.time_offset = data & ~(PAGE_MASK | 1);
+ gpa_offset = data & ~(PAGE_MASK | 1);
- vcpu->arch.time_page =
- gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
+ /* Check that the address is 32-byte aligned. */
+ if (gpa_offset & (sizeof(struct pvclock_vcpu_time_info) - 1))
+ break;
- if (is_error_page(vcpu->arch.time_page))
- vcpu->arch.time_page = NULL;
+ if (kvm_gfn_to_hva_cache_init(vcpu->kvm,
+ &vcpu->arch.pv_time, data & ~1ULL))
+ vcpu->arch.pv_time_enabled = false;
+ else
+ vcpu->arch.pv_time_enabled = true;
break;
}
*/
static int kvm_set_guest_paused(struct kvm_vcpu *vcpu)
{
- if (!vcpu->arch.time_page)
+ if (!vcpu->arch.pv_time_enabled)
return -EINVAL;
vcpu->arch.pvclock_set_guest_stopped_request = true;
kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
goto fail_free_wbinvd_dirty_mask;
vcpu->arch.ia32_tsc_adjust_msr = 0x0;
+ vcpu->arch.pv_time_enabled = false;
kvm_async_pf_hash_reset(vcpu);
kvm_pmu_init(vcpu);
char c;
unsigned zero_len;
- for (; len; --len) {
+ for (; len; --len, to++) {
if (__get_user_nocheck(c, from++, sizeof(char)))
break;
- if (__put_user_nocheck(c, to++, sizeof(char)))
+ if (__put_user_nocheck(c, to, sizeof(char)))
break;
}
#include <linux/suspend.h>
#include <linux/export.h>
#include <linux/smp.h>
+#include <linux/perf_event.h>
#include <asm/pgtable.h>
#include <asm/proto.h>
do_fpu_end();
x86_platform.restore_sched_clock_state();
mtrr_bp_restore();
+ perf_restore_debug_store();
}
/* Needed by apm.c */
__xen_write_cr3(true, cr3);
xen_mc_issue(PARAVIRT_LAZY_CPU); /* interrupts restored */
-
- pv_mmu_ops.write_cr3 = &xen_write_cr3;
}
#endif
#endif
#ifdef CONFIG_X86_64
+ pv_mmu_ops.write_cr3 = &xen_write_cr3;
SetPagePinned(virt_to_page(level3_user_vsyscall));
#endif
xen_mark_init_mm_pinned();
select HAVE_IDE
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
* copied from blk_rq_pos(rq).
*/
if (error_sector)
- *error_sector = bio->bi_sector;
+ *error_sector = bio->bi_sector;
if (!bio_flagged(bio, BIO_UPTODATE))
ret = -EIO;
hd_struct_put(part);
}
+EXPORT_SYMBOL(delete_partition);
static ssize_t whole_disk_show(struct device *dev,
struct device_attribute *attr, char *buf)
return rc;
data_len = estatus->data_length;
gdata = (struct acpi_hest_generic_data *)(estatus + 1);
- while (data_len > sizeof(*gdata)) {
+ while (data_len >= sizeof(*gdata)) {
gedata_len = gdata->error_data_length;
if (gedata_len > data_len - sizeof(*gdata))
return -EINVAL;
static void handle_root_bridge_removal(struct acpi_device *device)
{
+ acpi_status status;
struct acpi_eject_event *ej_event;
ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
ej_event->device = device;
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
- acpi_bus_hot_remove_device(ej_event);
+ status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, ej_event);
+ if (ACPI_FAILURE(status))
+ kfree(ej_event);
}
static void _handle_hotplug_event_root(struct work_struct *work)
handle = hp_work->handle;
type = hp_work->type;
- root = acpi_pci_find_root(handle);
+ acpi_scan_lock_acquire();
+ root = acpi_pci_find_root(handle);
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
switch (type) {
break;
}
+ acpi_scan_lock_release();
kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
kfree(buffer.pointer);
}
return result;
}
-static int acpi_processor_get_performance_info(struct acpi_processor *pr)
+int acpi_processor_get_performance_info(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
#endif
return result;
}
-
+EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info);
int acpi_processor_notify_smm(struct module *calling_module)
{
acpi_status status;
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW21M",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VPCEB17FX",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
EXPORT_SYMBOL(tegra_ahb_enable_smmu);
#endif
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
static int tegra_ahb_suspend(struct device *dev)
{
int i;
option libata.noacpi=1
config SATA_ZPODD
- bool "SATA Zero Power ODD Support"
+ bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
depends on ATA_ACPI
default n
help
- This option adds support for SATA ZPODD. It requires both
- ODD and the platform support, and if enabled, will automatically
- power on/off the ODD when certain condition is satisfied. This
- does not impact user's experience of the ODD, only power is saved
- when ODD is not in use(i.e. no disc inside).
+ This option adds support for SATA Zero Power Optical Disc
+ Drive (ZPODD). It requires both the ODD and the platform
+ support, and if enabled, will automatically power on/off the
+ ODD when certain condition is satisfied. This does not impact
+ end user's experience of the ODD, only power is saved when
+ the ODD is not in use (i.e. no disc inside).
If unsure, say N.
{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */
{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */
{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */
+ { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
+ { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
{ PCI_VDEVICE(INTEL, 0x8d04), board_ahci }, /* Wellsburg RAID */
{ PCI_VDEVICE(INTEL, 0x8d06), board_ahci }, /* Wellsburg RAID */
static int prefer_ms_hyperv = 1;
module_param(prefer_ms_hyperv, int, 0);
+MODULE_PARM_DESC(prefer_ms_hyperv,
+ "Prefer Hyper-V paravirtualization drivers instead of ATA, "
+ "0 - Use ATA drivers, "
+ "1 (Default) - Use the paravirtualization drivers.");
static void piix_ignore_devices_quirk(struct ata_host *host)
{
handle = ata_dev_acpi_handle(dev);
if (handle)
- acpi_dev_pm_remove_dependent(handle, &sdev->sdev_gendev);
+ acpi_dev_pm_add_dependent(handle, &sdev->sdev_gendev);
}
static void ata_acpi_unregister_power_resource(struct ata_device *dev)
},
};
-static int __init pata_s3c_init(void)
-{
- return platform_driver_probe(&pata_s3c_driver, pata_s3c_probe);
-}
-
-static void __exit pata_s3c_exit(void)
-{
- platform_driver_unregister(&pata_s3c_driver);
-}
-
-module_init(pata_s3c_init);
-module_exit(pata_s3c_exit);
+module_platform_driver_probe(pata_s3c_driver, pata_s3c_probe);
MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>");
MODULE_DESCRIPTION("low-level driver for Samsung PATA controller");
if (hcr_base)
iounmap(hcr_base);
- if (host_priv)
- kfree(host_priv);
+ kfree(host_priv);
return retval;
}
If unsure, say N.
config BLK_DEV_RSXX
- tristate "RamSam PCIe Flash SSD Device Driver"
+ tristate "IBM FlashSystem 70/80 PCIe SSD Device Driver"
depends on PCI
help
Device driver for IBM's high speed PCIe SSD
- storage devices: RamSan-70 and RamSan-80.
+ storage devices: FlashSystem-70 and FlashSystem-80.
To compile this driver as a module, choose M here: the
module will be called rsxx.
if (rc)
return rc;
h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index) + cfg_offset, sizeof(h->cfgtable));
+ cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
if (!h->cfgtable)
return -ENOMEM;
rc = write_driver_ver_to_cfgtable(h->cfgtable);
lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
- if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev)
- ioctl_by_bdev(bdev, BLKRRPART, 0);
lo->lo_flags = 0;
if (!part_shift)
lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
mutex_unlock(&lo->lo_ctl_mutex);
+
+ /*
+ * Remove all partitions, since BLKRRPART won't remove user
+ * added partitions when max_part=0
+ */
+ if (bdev) {
+ struct disk_part_iter piter;
+ struct hd_struct *part;
+
+ mutex_lock_nested(&bdev->bd_mutex, 1);
+ invalidate_partition(bdev->bd_disk, 0);
+ disk_part_iter_init(&piter, bdev->bd_disk,
+ DISK_PITER_INCL_EMPTY);
+ while ((part = disk_part_iter_next(&piter)))
+ delete_partition(bdev->bd_disk, part->partno);
+ disk_part_iter_exit(&piter);
+ mutex_unlock(&bdev->bd_mutex);
+ }
+
/*
* Need not hold lo_ctl_mutex to fput backing file.
* Calling fput holding lo_ctl_mutex triggers a circular
goto out_free_dev;
i = err;
+ err = -ENOMEM;
lo->lo_queue = blk_alloc_queue(GFP_KERNEL);
if (!lo->lo_queue)
goto out_free_dev;
gpio_direction_output(host->rst, 1);
/* reset out pin */
- if (!(prv_data->dev_attr & MG_DEV_MASK))
+ if (!(prv_data->dev_attr & MG_DEV_MASK)) {
+ err = -EINVAL;
goto probe_err_3a;
+ }
if (prv_data->dev_attr != MG_BOOT_DEV) {
rsc = platform_get_resource_byname(plat_dev, IORESOURCE_IO,
dd->isr_workq = create_workqueue(dd->workq_name);
if (!dd->isr_workq) {
dev_warn(&pdev->dev, "Can't create wq %d\n", dd->instance);
+ rv = -ENOMEM;
goto block_initialize_err;
}
INIT_WORK(&dd->work[7].work, mtip_workq_sdbf7);
pci_set_master(pdev);
- if (pci_enable_msi(pdev)) {
+ rv = pci_enable_msi(pdev);
+ if (rv) {
dev_warn(&pdev->dev,
"Unable to enable MSI interrupt.\n");
goto block_initialize_err;
BUILD_BUG_ON(sizeof(struct nvme_id_ctrl) != 4096);
BUILD_BUG_ON(sizeof(struct nvme_id_ns) != 4096);
BUILD_BUG_ON(sizeof(struct nvme_lba_range_type) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_smart_log) != 512);
}
typedef void (*nvme_completion_fn)(struct nvme_dev *, void *,
*fn = special_completion;
return CMD_CTX_INVALID;
}
- *fn = info[cmdid].fn;
+ if (fn)
+ *fn = info[cmdid].fn;
ctx = info[cmdid].ctx;
info[cmdid].fn = special_completion;
info[cmdid].ctx = CMD_CTX_COMPLETED;
iod->offset = offsetof(struct nvme_iod, sg[nseg]);
iod->npages = -1;
iod->length = nbytes;
+ iod->nents = 0;
}
return iod;
struct bio *bio = iod->private;
u16 status = le16_to_cpup(&cqe->status) >> 1;
- dma_unmap_sg(&dev->pci_dev->dev, iod->sg, iod->nents,
+ if (iod->nents)
+ dma_unmap_sg(&dev->pci_dev->dev, iod->sg, iod->nents,
bio_data_dir(bio) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
nvme_free_iod(dev, iod);
if (status) {
result = nvme_map_bio(nvmeq->q_dmadev, iod, bio, dma_dir, psegs);
if (result < 0)
- goto free_iod;
+ goto free_cmdid;
length = result;
cmnd->rw.command_id = cmdid;
return 0;
+ free_cmdid:
+ free_cmdid(nvmeq, cmdid, NULL);
free_iod:
nvme_free_iod(nvmeq->dev, iod);
nomem:
return nvme_submit_admin_cmd(dev, &c, NULL);
}
-static int nvme_get_features(struct nvme_dev *dev, unsigned fid,
- unsigned nsid, dma_addr_t dma_addr)
+static int nvme_get_features(struct nvme_dev *dev, unsigned fid, unsigned nsid,
+ dma_addr_t dma_addr, u32 *result)
{
struct nvme_command c;
c.features.prp1 = cpu_to_le64(dma_addr);
c.features.fid = cpu_to_le32(fid);
- return nvme_submit_admin_cmd(dev, &c, NULL);
+ return nvme_submit_admin_cmd(dev, &c, result);
}
static int nvme_set_features(struct nvme_dev *dev, unsigned fid,
spin_lock_irq(&nvmeq->q_lock);
nvme_cancel_ios(nvmeq, false);
+ while (bio_list_peek(&nvmeq->sq_cong)) {
+ struct bio *bio = bio_list_pop(&nvmeq->sq_cong);
+ bio_endio(bio, -EIO);
+ }
spin_unlock_irq(&nvmeq->q_lock);
irq_set_affinity_hint(vector, NULL);
if (length != cmd.data_len)
status = -ENOMEM;
else
- status = nvme_submit_admin_cmd(dev, &c, NULL);
+ status = nvme_submit_admin_cmd(dev, &c, &cmd.result);
if (cmd.data_len) {
nvme_unmap_user_pages(dev, cmd.opcode & 1, iod);
nvme_free_iod(dev, iod);
}
+
+ if (!status && copy_to_user(&ucmd->result, &cmd.result,
+ sizeof(cmd.result)))
+ status = -EFAULT;
+
return status;
}
continue;
res = nvme_get_features(dev, NVME_FEAT_LBA_RANGE, i,
- dma_addr + 4096);
+ dma_addr + 4096, NULL);
if (res)
- continue;
+ memset(mem + 4096, 0, 4096);
ns = nvme_alloc_ns(dev, i, mem, mem + 4096);
if (ns)
return atomic_read(&obj_request->done) != 0;
}
+static void
+rbd_img_obj_request_read_callback(struct rbd_obj_request *obj_request)
+{
+ dout("%s: obj %p img %p result %d %llu/%llu\n", __func__,
+ obj_request, obj_request->img_request, obj_request->result,
+ obj_request->xferred, obj_request->length);
+ /*
+ * ENOENT means a hole in the image. We zero-fill the
+ * entire length of the request. A short read also implies
+ * zero-fill to the end of the request. Either way we
+ * update the xferred count to indicate the whole request
+ * was satisfied.
+ */
+ BUG_ON(obj_request->type != OBJ_REQUEST_BIO);
+ if (obj_request->result == -ENOENT) {
+ zero_bio_chain(obj_request->bio_list, 0);
+ obj_request->result = 0;
+ obj_request->xferred = obj_request->length;
+ } else if (obj_request->xferred < obj_request->length &&
+ !obj_request->result) {
+ zero_bio_chain(obj_request->bio_list, obj_request->xferred);
+ obj_request->xferred = obj_request->length;
+ }
+ obj_request_done_set(obj_request);
+}
+
static void rbd_obj_request_complete(struct rbd_obj_request *obj_request)
{
dout("%s: obj %p cb %p\n", __func__, obj_request,
{
dout("%s: obj %p result %d %llu/%llu\n", __func__, obj_request,
obj_request->result, obj_request->xferred, obj_request->length);
- /*
- * ENOENT means a hole in the object. We zero-fill the
- * entire length of the request. A short read also implies
- * zero-fill to the end of the request. Either way we
- * update the xferred count to indicate the whole request
- * was satisfied.
- */
- if (obj_request->result == -ENOENT) {
- zero_bio_chain(obj_request->bio_list, 0);
- obj_request->result = 0;
- obj_request->xferred = obj_request->length;
- } else if (obj_request->xferred < obj_request->length &&
- !obj_request->result) {
- zero_bio_chain(obj_request->bio_list, obj_request->xferred);
- obj_request->xferred = obj_request->length;
- }
- obj_request_done_set(obj_request);
+ if (obj_request->img_request)
+ rbd_img_obj_request_read_callback(obj_request);
+ else
+ obj_request_done_set(obj_request);
}
static void rbd_osd_write_callback(struct rbd_obj_request *obj_request)
obj-$(CONFIG_BLK_DEV_RSXX) += rsxx.o
-rsxx-y := config.o core.o cregs.o dev.o dma.o
+rsxx-objs := config.o core.o cregs.o dev.o dma.o
#include "rsxx_priv.h"
#include "rsxx_cfg.h"
-static void initialize_config(void *config)
+static void initialize_config(struct rsxx_card_cfg *cfg)
{
- struct rsxx_card_cfg *cfg = config;
-
cfg->hdr.version = RSXX_CFG_VERSION;
cfg->data.block_size = RSXX_HW_BLK_SIZE;
cfg->data.stripe_size = RSXX_HW_BLK_SIZE;
- cfg->data.vendor_id = RSXX_VENDOR_ID_TMS_IBM;
+ cfg->data.vendor_id = RSXX_VENDOR_ID_IBM;
cfg->data.cache_order = (-1);
cfg->data.intr_coal.mode = RSXX_INTR_COAL_DISABLED;
cfg->data.intr_coal.count = 0;
} else {
dev_info(CARD_TO_DEV(card),
"Initializing card configuration.\n");
- initialize_config(card);
+ initialize_config(&card->config);
st = rsxx_save_config(card);
if (st)
return st;
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
#include <linux/genhd.h>
#include <linux/idr.h>
#define NO_LEGACY 0
-MODULE_DESCRIPTION("IBM RamSan PCIe Flash SSD Device Driver");
-MODULE_AUTHOR("IBM <support@ramsan.com>");
+MODULE_DESCRIPTION("IBM FlashSystem 70/80 PCIe SSD Device Driver");
+MODULE_AUTHOR("Joshua Morris/Philip Kelleher, IBM");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
static DEFINE_SPINLOCK(rsxx_ida_lock);
/*----------------- Interrupt Control & Handling -------------------*/
+
+static void rsxx_mask_interrupts(struct rsxx_cardinfo *card)
+{
+ card->isr_mask = 0;
+ card->ier_mask = 0;
+}
+
static void __enable_intr(unsigned int *mask, unsigned int intr)
{
*mask |= intr;
*/
void rsxx_enable_ier(struct rsxx_cardinfo *card, unsigned int intr)
{
- if (unlikely(card->halt))
+ if (unlikely(card->halt) ||
+ unlikely(card->eeh_state))
return;
__enable_intr(&card->ier_mask, intr);
void rsxx_disable_ier(struct rsxx_cardinfo *card, unsigned int intr)
{
+ if (unlikely(card->eeh_state))
+ return;
+
__disable_intr(&card->ier_mask, intr);
iowrite32(card->ier_mask, card->regmap + IER);
}
void rsxx_enable_ier_and_isr(struct rsxx_cardinfo *card,
unsigned int intr)
{
- if (unlikely(card->halt))
+ if (unlikely(card->halt) ||
+ unlikely(card->eeh_state))
return;
__enable_intr(&card->isr_mask, intr);
void rsxx_disable_ier_and_isr(struct rsxx_cardinfo *card,
unsigned int intr)
{
+ if (unlikely(card->eeh_state))
+ return;
+
__disable_intr(&card->isr_mask, intr);
__disable_intr(&card->ier_mask, intr);
iowrite32(card->ier_mask, card->regmap + IER);
do {
reread_isr = 0;
+ if (unlikely(card->eeh_state))
+ break;
+
isr = ioread32(card->regmap + ISR);
if (isr == 0xffffffff) {
/*
}
/*----------------- Card Event Handler -------------------*/
-static char *rsxx_card_state_to_str(unsigned int state)
+static const char * const rsxx_card_state_to_str(unsigned int state)
{
- static char *state_strings[] = {
+ static const char * const state_strings[] = {
"Unknown", "Shutdown", "Starting", "Formatting",
"Uninitialized", "Good", "Shutting Down",
"Fault", "Read Only Fault", "dStroying"
return 0;
}
+static int rsxx_eeh_frozen(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ int i;
+ int st;
+
+ dev_warn(&dev->dev, "IBM FlashSystem PCI: preparing for slot reset.\n");
+
+ card->eeh_state = 1;
+ rsxx_mask_interrupts(card);
+
+ /*
+ * We need to guarantee that the write for eeh_state and masking
+ * interrupts does not become reordered. This will prevent a possible
+ * race condition with the EEH code.
+ */
+ wmb();
+
+ pci_disable_device(dev);
+
+ st = rsxx_eeh_save_issued_dmas(card);
+ if (st)
+ return st;
+
+ rsxx_eeh_save_issued_creg(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ if (card->ctrl[i].status.buf)
+ pci_free_consistent(card->dev, STATUS_BUFFER_SIZE8,
+ card->ctrl[i].status.buf,
+ card->ctrl[i].status.dma_addr);
+ if (card->ctrl[i].cmd.buf)
+ pci_free_consistent(card->dev, COMMAND_BUFFER_SIZE8,
+ card->ctrl[i].cmd.buf,
+ card->ctrl[i].cmd.dma_addr);
+ }
+
+ return 0;
+}
+
+static void rsxx_eeh_failure(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ int i;
+
+ dev_err(&dev->dev, "IBM FlashSystem PCI: disabling failed card.\n");
+
+ card->eeh_state = 1;
+
+ for (i = 0; i < card->n_targets; i++)
+ del_timer_sync(&card->ctrl[i].activity_timer);
+
+ rsxx_eeh_cancel_dmas(card);
+}
+
+static int rsxx_eeh_fifo_flush_poll(struct rsxx_cardinfo *card)
+{
+ unsigned int status;
+ int iter = 0;
+
+ /* We need to wait for the hardware to reset */
+ while (iter++ < 10) {
+ status = ioread32(card->regmap + PCI_RECONFIG);
+
+ if (status & RSXX_FLUSH_BUSY) {
+ ssleep(1);
+ continue;
+ }
+
+ if (status & RSXX_FLUSH_TIMEOUT)
+ dev_warn(CARD_TO_DEV(card), "HW: flash controller timeout\n");
+ return 0;
+ }
+
+ /* Hardware failed resetting itself. */
+ return -1;
+}
+
+static pci_ers_result_t rsxx_error_detected(struct pci_dev *dev,
+ enum pci_channel_state error)
+{
+ int st;
+
+ if (dev->revision < RSXX_EEH_SUPPORT)
+ return PCI_ERS_RESULT_NONE;
+
+ if (error == pci_channel_io_perm_failure) {
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ st = rsxx_eeh_frozen(dev);
+ if (st) {
+ dev_err(&dev->dev, "Slot reset setup failed\n");
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t rsxx_slot_reset(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ unsigned long flags;
+ int i;
+ int st;
+
+ dev_warn(&dev->dev,
+ "IBM FlashSystem PCI: recovering from slot reset.\n");
+
+ st = pci_enable_device(dev);
+ if (st)
+ goto failed_hw_setup;
+
+ pci_set_master(dev);
+
+ st = rsxx_eeh_fifo_flush_poll(card);
+ if (st)
+ goto failed_hw_setup;
+
+ rsxx_dma_queue_reset(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ st = rsxx_hw_buffers_init(dev, &card->ctrl[i]);
+ if (st)
+ goto failed_hw_buffers_init;
+ }
+
+ if (card->config_valid)
+ rsxx_dma_configure(card);
+
+ /* Clears the ISR register from spurious interrupts */
+ st = ioread32(card->regmap + ISR);
+
+ card->eeh_state = 0;
+
+ st = rsxx_eeh_remap_dmas(card);
+ if (st)
+ goto failed_remap_dmas;
+
+ spin_lock_irqsave(&card->irq_lock, flags);
+ if (card->n_targets & RSXX_MAX_TARGETS)
+ rsxx_enable_ier_and_isr(card, CR_INTR_ALL_G);
+ else
+ rsxx_enable_ier_and_isr(card, CR_INTR_ALL_C);
+ spin_unlock_irqrestore(&card->irq_lock, flags);
+
+ rsxx_kick_creg_queue(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ if (list_empty(&card->ctrl[i].queue)) {
+ spin_unlock(&card->ctrl[i].queue_lock);
+ continue;
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+
+ queue_work(card->ctrl[i].issue_wq,
+ &card->ctrl[i].issue_dma_work);
+ }
+
+ dev_info(&dev->dev, "IBM FlashSystem PCI: recovery complete.\n");
+
+ return PCI_ERS_RESULT_RECOVERED;
+
+failed_hw_buffers_init:
+failed_remap_dmas:
+ for (i = 0; i < card->n_targets; i++) {
+ if (card->ctrl[i].status.buf)
+ pci_free_consistent(card->dev,
+ STATUS_BUFFER_SIZE8,
+ card->ctrl[i].status.buf,
+ card->ctrl[i].status.dma_addr);
+ if (card->ctrl[i].cmd.buf)
+ pci_free_consistent(card->dev,
+ COMMAND_BUFFER_SIZE8,
+ card->ctrl[i].cmd.buf,
+ card->ctrl[i].cmd.dma_addr);
+ }
+failed_hw_setup:
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+
+}
+
/*----------------- Driver Initialization & Setup -------------------*/
/* Returns: 0 if the driver is compatible with the device
-1 if the driver is NOT compatible with the device */
spin_lock_init(&card->irq_lock);
card->halt = 0;
+ card->eeh_state = 0;
spin_lock_irq(&card->irq_lock);
rsxx_disable_ier_and_isr(card, CR_INTR_ALL);
rsxx_disable_ier_and_isr(card, CR_INTR_EVENT);
spin_unlock_irqrestore(&card->irq_lock, flags);
- /* Prevent work_structs from re-queuing themselves. */
- card->halt = 1;
-
cancel_work_sync(&card->event_work);
rsxx_destroy_dev(card);
spin_lock_irqsave(&card->irq_lock, flags);
rsxx_disable_ier_and_isr(card, CR_INTR_ALL);
spin_unlock_irqrestore(&card->irq_lock, flags);
+
+ /* Prevent work_structs from re-queuing themselves. */
+ card->halt = 1;
+
free_irq(dev->irq, card);
if (!force_legacy)
card_shutdown(card);
}
+static const struct pci_error_handlers rsxx_err_handler = {
+ .error_detected = rsxx_error_detected,
+ .slot_reset = rsxx_slot_reset,
+};
+
static DEFINE_PCI_DEVICE_TABLE(rsxx_pci_ids) = {
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS70_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS70D_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS80_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS81_FLASH)},
+ {PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_FS70_FLASH)},
+ {PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_FS80_FLASH)},
{0,},
};
.remove = rsxx_pci_remove,
.suspend = rsxx_pci_suspend,
.shutdown = rsxx_pci_shutdown,
+ .err_handler = &rsxx_err_handler,
};
static int __init rsxx_core_init(void)
#error Unknown endianess!!! Aborting...
#endif
-static void copy_to_creg_data(struct rsxx_cardinfo *card,
+static int copy_to_creg_data(struct rsxx_cardinfo *card,
int cnt8,
void *buf,
unsigned int stream)
int i = 0;
u32 *data = buf;
+ if (unlikely(card->eeh_state))
+ return -EIO;
+
for (i = 0; cnt8 > 0; i++, cnt8 -= 4) {
/*
* Firmware implementation makes it necessary to byte swap on
else
iowrite32(data[i], card->regmap + CREG_DATA(i));
}
+
+ return 0;
}
-static void copy_from_creg_data(struct rsxx_cardinfo *card,
+static int copy_from_creg_data(struct rsxx_cardinfo *card,
int cnt8,
void *buf,
unsigned int stream)
int i = 0;
u32 *data = buf;
+ if (unlikely(card->eeh_state))
+ return -EIO;
+
for (i = 0; cnt8 > 0; i++, cnt8 -= 4) {
/*
* Firmware implementation makes it necessary to byte swap on
else
data[i] = ioread32(card->regmap + CREG_DATA(i));
}
-}
-
-static struct creg_cmd *pop_active_cmd(struct rsxx_cardinfo *card)
-{
- struct creg_cmd *cmd;
- /*
- * Spin lock is needed because this can be called in atomic/interrupt
- * context.
- */
- spin_lock_bh(&card->creg_ctrl.lock);
- cmd = card->creg_ctrl.active_cmd;
- card->creg_ctrl.active_cmd = NULL;
- spin_unlock_bh(&card->creg_ctrl.lock);
-
- return cmd;
+ return 0;
}
static void creg_issue_cmd(struct rsxx_cardinfo *card, struct creg_cmd *cmd)
{
+ int st;
+
+ if (unlikely(card->eeh_state))
+ return;
+
iowrite32(cmd->addr, card->regmap + CREG_ADD);
iowrite32(cmd->cnt8, card->regmap + CREG_CNT);
if (cmd->op == CREG_OP_WRITE) {
- if (cmd->buf)
- copy_to_creg_data(card, cmd->cnt8,
- cmd->buf, cmd->stream);
+ if (cmd->buf) {
+ st = copy_to_creg_data(card, cmd->cnt8,
+ cmd->buf, cmd->stream);
+ if (st)
+ return;
+ }
}
- /*
- * Data copy must complete before initiating the command. This is
- * needed for weakly ordered processors (i.e. PowerPC), so that all
- * neccessary registers are written before we kick the hardware.
- */
- wmb();
+ if (unlikely(card->eeh_state))
+ return;
/* Setting the valid bit will kick off the command. */
iowrite32(cmd->op, card->regmap + CREG_CMD);
cmd->cb_private = cb_private;
cmd->status = 0;
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_add_tail(&cmd->list, &card->creg_ctrl.queue);
card->creg_ctrl.q_depth++;
creg_kick_queue(card);
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
return 0;
}
struct rsxx_cardinfo *card = (struct rsxx_cardinfo *) data;
struct creg_cmd *cmd;
- cmd = pop_active_cmd(card);
+ spin_lock(&card->creg_ctrl.lock);
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+ spin_unlock(&card->creg_ctrl.lock);
+
if (cmd == NULL) {
card->creg_ctrl.creg_stats.creg_timeout++;
dev_warn(CARD_TO_DEV(card),
if (del_timer_sync(&card->creg_ctrl.cmd_timer) == 0)
card->creg_ctrl.creg_stats.failed_cancel_timer++;
- cmd = pop_active_cmd(card);
+ spin_lock_bh(&card->creg_ctrl.lock);
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+ spin_unlock_bh(&card->creg_ctrl.lock);
+
if (cmd == NULL) {
dev_err(CARD_TO_DEV(card),
"Spurious creg interrupt!\n");
goto creg_done;
}
- copy_from_creg_data(card, cnt8, cmd->buf, cmd->stream);
+ st = copy_from_creg_data(card, cnt8, cmd->buf, cmd->stream);
}
creg_done:
kmem_cache_free(creg_cmd_pool, cmd);
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
card->creg_ctrl.active = 0;
creg_kick_queue(card);
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
}
static void creg_reset(struct rsxx_cardinfo *card)
"Resetting creg interface for recovery\n");
/* Cancel outstanding commands */
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_for_each_entry_safe(cmd, tmp, &card->creg_ctrl.queue, list) {
list_del(&cmd->list);
card->creg_ctrl.q_depth--;
card->creg_ctrl.active = 0;
}
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
card->creg_ctrl.reset = 0;
spin_lock_irqsave(&card->irq_lock, flags);
return st;
/*
- * This timeout is neccessary for unresponsive hardware. The additional
+ * This timeout is necessary for unresponsive hardware. The additional
* 20 seconds to used to guarantee that each cregs requests has time to
* complete.
*/
- timeout = msecs_to_jiffies((CREG_TIMEOUT_MSEC *
- card->creg_ctrl.q_depth) + 20000);
+ timeout = msecs_to_jiffies(CREG_TIMEOUT_MSEC *
+ card->creg_ctrl.q_depth + 20000);
/*
* The creg interface is guaranteed to complete. It has a timeout
return 0;
}
+void rsxx_eeh_save_issued_creg(struct rsxx_cardinfo *card)
+{
+ struct creg_cmd *cmd = NULL;
+
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+
+ if (cmd) {
+ del_timer_sync(&card->creg_ctrl.cmd_timer);
+
+ spin_lock_bh(&card->creg_ctrl.lock);
+ list_add(&cmd->list, &card->creg_ctrl.queue);
+ card->creg_ctrl.q_depth++;
+ card->creg_ctrl.active = 0;
+ spin_unlock_bh(&card->creg_ctrl.lock);
+ }
+}
+
+void rsxx_kick_creg_queue(struct rsxx_cardinfo *card)
+{
+ spin_lock_bh(&card->creg_ctrl.lock);
+ if (!list_empty(&card->creg_ctrl.queue))
+ creg_kick_queue(card);
+ spin_unlock_bh(&card->creg_ctrl.lock);
+}
+
/*------------ Initialization & Setup --------------*/
int rsxx_creg_setup(struct rsxx_cardinfo *card)
{
int cnt = 0;
/* Cancel outstanding commands */
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_for_each_entry_safe(cmd, tmp, &card->creg_ctrl.queue, list) {
list_del(&cmd->list);
if (cmd->cb)
"Canceled active creg command\n");
kmem_cache_free(creg_cmd_pool, cmd);
}
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
cancel_work_sync(&card->creg_ctrl.done_work);
}
struct rsxx_dma {
struct list_head list;
u8 cmd;
- unsigned int laddr; /* Logical address on the ramsan */
+ unsigned int laddr; /* Logical address */
struct {
u32 off;
u32 cnt;
HW_STATUS_FAULT = 0x08,
};
-#define STATUS_BUFFER_SIZE8 4096
-#define COMMAND_BUFFER_SIZE8 4096
-
static struct kmem_cache *rsxx_dma_pool;
struct dma_tracker {
return tgt;
}
-static void rsxx_dma_queue_reset(struct rsxx_cardinfo *card)
+void rsxx_dma_queue_reset(struct rsxx_cardinfo *card)
{
/* Reset all DMA Command/Status Queues */
iowrite32(DMA_QUEUE_RESET, card->regmap + RESET);
u32 q_depth = 0;
u32 intr_coal;
- if (card->config.data.intr_coal.mode != RSXX_INTR_COAL_AUTO_TUNE)
+ if (card->config.data.intr_coal.mode != RSXX_INTR_COAL_AUTO_TUNE ||
+ unlikely(card->eeh_state))
return;
for (i = 0; i < card->n_targets; i++)
}
/*----------------- RSXX DMA Handling -------------------*/
-static void rsxx_complete_dma(struct rsxx_cardinfo *card,
+static void rsxx_complete_dma(struct rsxx_dma_ctrl *ctrl,
struct rsxx_dma *dma,
unsigned int status)
{
if (status & DMA_SW_ERR)
- printk_ratelimited(KERN_ERR
- "SW Error in DMA(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_sw_err++;
if (status & DMA_HW_FAULT)
- printk_ratelimited(KERN_ERR
- "HW Fault in DMA(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_hw_fault++;
if (status & DMA_CANCELLED)
- printk_ratelimited(KERN_ERR
- "DMA Cancelled(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_cancelled++;
if (dma->dma_addr)
- pci_unmap_page(card->dev, dma->dma_addr, get_dma_size(dma),
+ pci_unmap_page(ctrl->card->dev, dma->dma_addr,
+ get_dma_size(dma),
dma->cmd == HW_CMD_BLK_WRITE ?
PCI_DMA_TODEVICE :
PCI_DMA_FROMDEVICE);
if (dma->cb)
- dma->cb(card, dma->cb_data, status ? 1 : 0);
+ dma->cb(ctrl->card, dma->cb_data, status ? 1 : 0);
kmem_cache_free(rsxx_dma_pool, dma);
}
if (requeue_cmd)
rsxx_requeue_dma(ctrl, dma);
else
- rsxx_complete_dma(ctrl->card, dma, status);
+ rsxx_complete_dma(ctrl, dma, status);
}
static void dma_engine_stalled(unsigned long data)
{
struct rsxx_dma_ctrl *ctrl = (struct rsxx_dma_ctrl *)data;
- if (atomic_read(&ctrl->stats.hw_q_depth) == 0)
+ if (atomic_read(&ctrl->stats.hw_q_depth) == 0 ||
+ unlikely(ctrl->card->eeh_state))
return;
if (ctrl->cmd.idx != ioread32(ctrl->regmap + SW_CMD_IDX)) {
ctrl = container_of(work, struct rsxx_dma_ctrl, issue_dma_work);
hw_cmd_buf = ctrl->cmd.buf;
- if (unlikely(ctrl->card->halt))
+ if (unlikely(ctrl->card->halt) ||
+ unlikely(ctrl->card->eeh_state))
return;
while (1) {
*/
if (unlikely(ctrl->card->dma_fault)) {
push_tracker(ctrl->trackers, tag);
- rsxx_complete_dma(ctrl->card, dma, DMA_CANCELLED);
+ rsxx_complete_dma(ctrl, dma, DMA_CANCELLED);
continue;
}
/* Let HW know we've queued commands. */
if (cmds_pending) {
- /*
- * We must guarantee that the CPU writes to 'ctrl->cmd.buf'
- * (which is in PCI-consistent system-memory) from the loop
- * above make it into the coherency domain before the
- * following PIO "trigger" updating the cmd.idx. A WMB is
- * sufficient. We need not explicitly CPU cache-flush since
- * the memory is a PCI-consistent (ie; coherent) mapping.
- */
- wmb();
-
atomic_add(cmds_pending, &ctrl->stats.hw_q_depth);
mod_timer(&ctrl->activity_timer,
jiffies + DMA_ACTIVITY_TIMEOUT);
+
+ if (unlikely(ctrl->card->eeh_state)) {
+ del_timer_sync(&ctrl->activity_timer);
+ return;
+ }
+
iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
}
}
hw_st_buf = ctrl->status.buf;
if (unlikely(ctrl->card->halt) ||
- unlikely(ctrl->card->dma_fault))
+ unlikely(ctrl->card->dma_fault) ||
+ unlikely(ctrl->card->eeh_state))
return;
count = le16_to_cpu(hw_st_buf[ctrl->status.idx].count);
if (status)
rsxx_handle_dma_error(ctrl, dma, status);
else
- rsxx_complete_dma(ctrl->card, dma, 0);
+ rsxx_complete_dma(ctrl, dma, 0);
push_tracker(ctrl->trackers, tag);
/*----------------- DMA Engine Initialization & Setup -------------------*/
+int rsxx_hw_buffers_init(struct pci_dev *dev, struct rsxx_dma_ctrl *ctrl)
+{
+ ctrl->status.buf = pci_alloc_consistent(dev, STATUS_BUFFER_SIZE8,
+ &ctrl->status.dma_addr);
+ ctrl->cmd.buf = pci_alloc_consistent(dev, COMMAND_BUFFER_SIZE8,
+ &ctrl->cmd.dma_addr);
+ if (ctrl->status.buf == NULL || ctrl->cmd.buf == NULL)
+ return -ENOMEM;
+
+ memset(ctrl->status.buf, 0xac, STATUS_BUFFER_SIZE8);
+ iowrite32(lower_32_bits(ctrl->status.dma_addr),
+ ctrl->regmap + SB_ADD_LO);
+ iowrite32(upper_32_bits(ctrl->status.dma_addr),
+ ctrl->regmap + SB_ADD_HI);
+
+ memset(ctrl->cmd.buf, 0x83, COMMAND_BUFFER_SIZE8);
+ iowrite32(lower_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_LO);
+ iowrite32(upper_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_HI);
+
+ ctrl->status.idx = ioread32(ctrl->regmap + HW_STATUS_CNT);
+ if (ctrl->status.idx > RSXX_MAX_OUTSTANDING_CMDS) {
+ dev_crit(&dev->dev, "Failed reading status cnt x%x\n",
+ ctrl->status.idx);
+ return -EINVAL;
+ }
+ iowrite32(ctrl->status.idx, ctrl->regmap + HW_STATUS_CNT);
+ iowrite32(ctrl->status.idx, ctrl->regmap + SW_STATUS_CNT);
+
+ ctrl->cmd.idx = ioread32(ctrl->regmap + HW_CMD_IDX);
+ if (ctrl->cmd.idx > RSXX_MAX_OUTSTANDING_CMDS) {
+ dev_crit(&dev->dev, "Failed reading cmd cnt x%x\n",
+ ctrl->status.idx);
+ return -EINVAL;
+ }
+ iowrite32(ctrl->cmd.idx, ctrl->regmap + HW_CMD_IDX);
+ iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
+
+ return 0;
+}
+
static int rsxx_dma_ctrl_init(struct pci_dev *dev,
struct rsxx_dma_ctrl *ctrl)
{
int i;
+ int st;
memset(&ctrl->stats, 0, sizeof(ctrl->stats));
- ctrl->status.buf = pci_alloc_consistent(dev, STATUS_BUFFER_SIZE8,
- &ctrl->status.dma_addr);
- ctrl->cmd.buf = pci_alloc_consistent(dev, COMMAND_BUFFER_SIZE8,
- &ctrl->cmd.dma_addr);
- if (ctrl->status.buf == NULL || ctrl->cmd.buf == NULL)
- return -ENOMEM;
-
ctrl->trackers = vmalloc(DMA_TRACKER_LIST_SIZE8);
if (!ctrl->trackers)
return -ENOMEM;
INIT_WORK(&ctrl->issue_dma_work, rsxx_issue_dmas);
INIT_WORK(&ctrl->dma_done_work, rsxx_dma_done);
- memset(ctrl->status.buf, 0xac, STATUS_BUFFER_SIZE8);
- iowrite32(lower_32_bits(ctrl->status.dma_addr),
- ctrl->regmap + SB_ADD_LO);
- iowrite32(upper_32_bits(ctrl->status.dma_addr),
- ctrl->regmap + SB_ADD_HI);
-
- memset(ctrl->cmd.buf, 0x83, COMMAND_BUFFER_SIZE8);
- iowrite32(lower_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_LO);
- iowrite32(upper_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_HI);
-
- ctrl->status.idx = ioread32(ctrl->regmap + HW_STATUS_CNT);
- if (ctrl->status.idx > RSXX_MAX_OUTSTANDING_CMDS) {
- dev_crit(&dev->dev, "Failed reading status cnt x%x\n",
- ctrl->status.idx);
- return -EINVAL;
- }
- iowrite32(ctrl->status.idx, ctrl->regmap + HW_STATUS_CNT);
- iowrite32(ctrl->status.idx, ctrl->regmap + SW_STATUS_CNT);
-
- ctrl->cmd.idx = ioread32(ctrl->regmap + HW_CMD_IDX);
- if (ctrl->cmd.idx > RSXX_MAX_OUTSTANDING_CMDS) {
- dev_crit(&dev->dev, "Failed reading cmd cnt x%x\n",
- ctrl->status.idx);
- return -EINVAL;
- }
- iowrite32(ctrl->cmd.idx, ctrl->regmap + HW_CMD_IDX);
- iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
-
- wmb();
+ st = rsxx_hw_buffers_init(dev, ctrl);
+ if (st)
+ return st;
return 0;
}
return 0;
}
-static int rsxx_dma_configure(struct rsxx_cardinfo *card)
+int rsxx_dma_configure(struct rsxx_cardinfo *card)
{
u32 intr_coal;
}
}
+int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card)
+{
+ int i;
+ int j;
+ int cnt;
+ struct rsxx_dma *dma;
+ struct list_head *issued_dmas;
+
+ issued_dmas = kzalloc(sizeof(*issued_dmas) * card->n_targets,
+ GFP_KERNEL);
+ if (!issued_dmas)
+ return -ENOMEM;
+
+ for (i = 0; i < card->n_targets; i++) {
+ INIT_LIST_HEAD(&issued_dmas[i]);
+ cnt = 0;
+ for (j = 0; j < RSXX_MAX_OUTSTANDING_CMDS; j++) {
+ dma = get_tracker_dma(card->ctrl[i].trackers, j);
+ if (dma == NULL)
+ continue;
+
+ if (dma->cmd == HW_CMD_BLK_WRITE)
+ card->ctrl[i].stats.writes_issued--;
+ else if (dma->cmd == HW_CMD_BLK_DISCARD)
+ card->ctrl[i].stats.discards_issued--;
+ else
+ card->ctrl[i].stats.reads_issued--;
+
+ list_add_tail(&dma->list, &issued_dmas[i]);
+ push_tracker(card->ctrl[i].trackers, j);
+ cnt++;
+ }
+
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_splice(&issued_dmas[i], &card->ctrl[i].queue);
+
+ atomic_sub(cnt, &card->ctrl[i].stats.hw_q_depth);
+ card->ctrl[i].stats.sw_q_depth += cnt;
+ card->ctrl[i].e_cnt = 0;
+
+ list_for_each_entry(dma, &card->ctrl[i].queue, list) {
+ if (dma->dma_addr)
+ pci_unmap_page(card->dev, dma->dma_addr,
+ get_dma_size(dma),
+ dma->cmd == HW_CMD_BLK_WRITE ?
+ PCI_DMA_TODEVICE :
+ PCI_DMA_FROMDEVICE);
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+
+ kfree(issued_dmas);
+
+ return 0;
+}
+
+void rsxx_eeh_cancel_dmas(struct rsxx_cardinfo *card)
+{
+ struct rsxx_dma *dma;
+ struct rsxx_dma *tmp;
+ int i;
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_for_each_entry_safe(dma, tmp, &card->ctrl[i].queue, list) {
+ list_del(&dma->list);
+
+ rsxx_complete_dma(&card->ctrl[i], dma, DMA_CANCELLED);
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+}
+
+int rsxx_eeh_remap_dmas(struct rsxx_cardinfo *card)
+{
+ struct rsxx_dma *dma;
+ int i;
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_for_each_entry(dma, &card->ctrl[i].queue, list) {
+ dma->dma_addr = pci_map_page(card->dev, dma->page,
+ dma->pg_off, get_dma_size(dma),
+ dma->cmd == HW_CMD_BLK_WRITE ?
+ PCI_DMA_TODEVICE :
+ PCI_DMA_FROMDEVICE);
+ if (!dma->dma_addr) {
+ spin_unlock(&card->ctrl[i].queue_lock);
+ kmem_cache_free(rsxx_dma_pool, dma);
+ return -ENOMEM;
+ }
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+
+ return 0;
+}
int rsxx_dma_init(void)
{
/*----------------- IOCTL Definitions -------------------*/
+#define RSXX_MAX_DATA 8
+
struct rsxx_reg_access {
__u32 addr;
__u32 cnt;
__u32 stat;
__u32 stream;
- __u32 data[8];
+ __u32 data[RSXX_MAX_DATA];
};
-#define RSXX_MAX_REG_CNT (8 * (sizeof(__u32)))
+#define RSXX_MAX_REG_CNT (RSXX_MAX_DATA * (sizeof(__u32)))
#define RSXX_IOC_MAGIC 'r'
};
/* Vendor ID Values */
-#define RSXX_VENDOR_ID_TMS_IBM 0
+#define RSXX_VENDOR_ID_IBM 0
#define RSXX_VENDOR_ID_DSI 1
#define RSXX_VENDOR_COUNT 2
struct proc_cmd;
-#define PCI_VENDOR_ID_TMS_IBM 0x15B6
-#define PCI_DEVICE_ID_RS70_FLASH 0x0019
-#define PCI_DEVICE_ID_RS70D_FLASH 0x001A
-#define PCI_DEVICE_ID_RS80_FLASH 0x001C
-#define PCI_DEVICE_ID_RS81_FLASH 0x001E
+#define PCI_DEVICE_ID_FS70_FLASH 0x04A9
+#define PCI_DEVICE_ID_FS80_FLASH 0x04AA
#define RS70_PCI_REV_SUPPORTED 4
#define DRIVER_NAME "rsxx"
-#define DRIVER_VERSION "3.7"
+#define DRIVER_VERSION "4.0"
/* Block size is 4096 */
#define RSXX_HW_BLK_SHIFT 12
#define RSXX_MAX_OUTSTANDING_CMDS 255
#define RSXX_CS_IDX_MASK 0xff
+#define STATUS_BUFFER_SIZE8 4096
+#define COMMAND_BUFFER_SIZE8 4096
+
#define RSXX_MAX_TARGETS 8
struct dma_tracker_list;
u32 discards_failed;
u32 done_rescheduled;
u32 issue_rescheduled;
+ u32 dma_sw_err;
+ u32 dma_hw_fault;
+ u32 dma_cancelled;
u32 sw_q_depth; /* Number of DMAs on the SW queue. */
atomic_t hw_q_depth; /* Number of DMAs queued to HW. */
};
struct rsxx_cardinfo {
struct pci_dev *dev;
unsigned int halt;
+ unsigned int eeh_state;
void __iomem *regmap;
spinlock_t irq_lock;
PERF_RD512_HI = 0xac,
PERF_WR512_LO = 0xb0,
PERF_WR512_HI = 0xb4,
+ PCI_RECONFIG = 0xb8,
};
enum rsxx_intr {
CR_INTR_DMA5 = 0x00000080,
CR_INTR_DMA6 = 0x00000100,
CR_INTR_DMA7 = 0x00000200,
+ CR_INTR_ALL_C = 0x0000003f,
+ CR_INTR_ALL_G = 0x000003ff,
CR_INTR_DMA_ALL = 0x000003f5,
CR_INTR_ALL = 0xffffffff,
};
DMA_QUEUE_RESET = 0x00000001,
};
+enum rsxx_hw_fifo_flush {
+ RSXX_FLUSH_BUSY = 0x00000002,
+ RSXX_FLUSH_TIMEOUT = 0x00000004,
+};
+
enum rsxx_pci_revision {
RSXX_DISCARD_SUPPORT = 2,
+ RSXX_EEH_SUPPORT = 3,
};
enum rsxx_creg_cmd {
void rsxx_dma_destroy(struct rsxx_cardinfo *card);
int rsxx_dma_init(void);
void rsxx_dma_cleanup(void);
+void rsxx_dma_queue_reset(struct rsxx_cardinfo *card);
+int rsxx_dma_configure(struct rsxx_cardinfo *card);
int rsxx_dma_queue_bio(struct rsxx_cardinfo *card,
struct bio *bio,
atomic_t *n_dmas,
rsxx_dma_cb cb,
void *cb_data);
+int rsxx_hw_buffers_init(struct pci_dev *dev, struct rsxx_dma_ctrl *ctrl);
+int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card);
+void rsxx_eeh_cancel_dmas(struct rsxx_cardinfo *card);
+int rsxx_eeh_remap_dmas(struct rsxx_cardinfo *card);
/***** cregs.c *****/
int rsxx_creg_write(struct rsxx_cardinfo *card, u32 addr,
void rsxx_creg_destroy(struct rsxx_cardinfo *card);
int rsxx_creg_init(void);
void rsxx_creg_cleanup(void);
-
int rsxx_reg_access(struct rsxx_cardinfo *card,
struct rsxx_reg_access __user *ucmd,
int read);
+void rsxx_eeh_save_issued_creg(struct rsxx_cardinfo *card);
+void rsxx_kick_creg_queue(struct rsxx_cardinfo *card);
#define foreach_grant_safe(pos, n, rbtree, node) \
for ((pos) = container_of(rb_first((rbtree)), typeof(*(pos)), node), \
- (n) = rb_next(&(pos)->node); \
+ (n) = (&(pos)->node != NULL) ? rb_next(&(pos)->node) : NULL; \
&(pos)->node != NULL; \
(pos) = container_of(n, typeof(*(pos)), node), \
(n) = (&(pos)->node != NULL) ? rb_next(&(pos)->node) : NULL)
static void print_stats(struct xen_blkif *blkif)
{
- pr_info("xen-blkback (%s): oo %3d | rd %4d | wr %4d | f %4d"
- " | ds %4d\n",
+ pr_info("xen-blkback (%s): oo %3llu | rd %4llu | wr %4llu | f %4llu"
+ " | ds %4llu\n",
current->comm, blkif->st_oo_req,
blkif->st_rd_req, blkif->st_wr_req,
blkif->st_f_req, blkif->st_ds_req);
}
struct seg_buf {
- unsigned long buf;
+ unsigned int offset;
unsigned int nsec;
};
/*
* If this is a new persistent grant
* save the handler
*/
- persistent_gnts[i]->handle = map[j].handle;
- persistent_gnts[i]->dev_bus_addr =
- map[j++].dev_bus_addr;
+ persistent_gnts[i]->handle = map[j++].handle;
}
pending_handle(pending_req, i) =
persistent_gnts[i]->handle;
if (ret)
continue;
-
- seg[i].buf = persistent_gnts[i]->dev_bus_addr |
- (req->u.rw.seg[i].first_sect << 9);
} else {
- pending_handle(pending_req, i) = map[j].handle;
+ pending_handle(pending_req, i) = map[j++].handle;
bitmap_set(pending_req->unmap_seg, i, 1);
- if (ret) {
- j++;
+ if (ret)
continue;
- }
-
- seg[i].buf = map[j++].dev_bus_addr |
- (req->u.rw.seg[i].first_sect << 9);
}
+ seg[i].offset = (req->u.rw.seg[i].first_sect << 9);
}
return ret;
}
return err;
}
+static int dispatch_other_io(struct xen_blkif *blkif,
+ struct blkif_request *req,
+ struct pending_req *pending_req)
+{
+ free_req(pending_req);
+ make_response(blkif, req->u.other.id, req->operation,
+ BLKIF_RSP_EOPNOTSUPP);
+ return -EIO;
+}
+
static void xen_blk_drain_io(struct xen_blkif *blkif)
{
atomic_set(&blkif->drain, 1);
/* Apply all sanity checks to /private copy/ of request. */
barrier();
- if (unlikely(req.operation == BLKIF_OP_DISCARD)) {
+
+ switch (req.operation) {
+ case BLKIF_OP_READ:
+ case BLKIF_OP_WRITE:
+ case BLKIF_OP_WRITE_BARRIER:
+ case BLKIF_OP_FLUSH_DISKCACHE:
+ if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ case BLKIF_OP_DISCARD:
free_req(pending_req);
if (dispatch_discard_io(blkif, &req))
- break;
- } else if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
break;
+ default:
+ if (dispatch_other_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ }
/* Yield point for this unbounded loop. */
cond_resched();
}
-
+done:
return more_to_do;
}
pr_debug(DRV_PFX "access denied: %s of [%llu,%llu] on dev=%04x\n",
operation == READ ? "read" : "write",
preq.sector_number,
- preq.sector_number + preq.nr_sects, preq.dev);
+ preq.sector_number + preq.nr_sects,
+ blkif->vbd.pdevice);
goto fail_response;
}
(bio_add_page(bio,
pages[i],
seg[i].nsec << 9,
- seg[i].buf & ~PAGE_MASK) == 0)) {
+ seg[i].offset) == 0)) {
bio = bio_alloc(GFP_KERNEL, nseg-i);
if (unlikely(bio == NULL))
bio->bi_end_io = end_block_io_op;
}
- /*
- * We set it one so that the last submit_bio does not have to call
- * atomic_inc.
- */
atomic_set(&pending_req->pendcnt, nbio);
-
- /* Get a reference count for the disk queue and start sending I/O */
blk_start_plug(&plug);
for (i = 0; i < nbio; i++)
fail_put_bio:
for (i = 0; i < nbio; i++)
bio_put(biolist[i]);
+ atomic_set(&pending_req->pendcnt, 1);
__end_block_io_op(pending_req, -EINVAL);
msleep(1); /* back off a bit */
return -EIO;
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_32_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_32_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_32_request_rw rw;
struct blkif_x86_32_request_discard discard;
+ struct blkif_x86_32_request_other other;
} u;
} __attribute__((__packed__));
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_64_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint32_t _pad3; /* offsetof(blkif_..,u.discard.id)==8 */
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_64_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_64_request_rw rw;
struct blkif_x86_64_request_discard discard;
+ struct blkif_x86_64_request_other other;
} u;
} __attribute__((__packed__));
struct page *page;
grant_ref_t gnt;
grant_handle_t handle;
- uint64_t dev_bus_addr;
struct rb_node node;
};
/* statistics */
unsigned long st_print;
- int st_rd_req;
- int st_wr_req;
- int st_oo_req;
- int st_f_req;
- int st_ds_req;
- int st_rd_sect;
- int st_wr_sect;
+ unsigned long long st_rd_req;
+ unsigned long long st_wr_req;
+ unsigned long long st_oo_req;
+ unsigned long long st_f_req;
+ unsigned long long st_ds_req;
+ unsigned long long st_rd_sect;
+ unsigned long long st_wr_sect;
wait_queue_head_t waiting_to_free;
};
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
} \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
-VBD_SHOW(oo_req, "%d\n", be->blkif->st_oo_req);
-VBD_SHOW(rd_req, "%d\n", be->blkif->st_rd_req);
-VBD_SHOW(wr_req, "%d\n", be->blkif->st_wr_req);
-VBD_SHOW(f_req, "%d\n", be->blkif->st_f_req);
-VBD_SHOW(ds_req, "%d\n", be->blkif->st_ds_req);
-VBD_SHOW(rd_sect, "%d\n", be->blkif->st_rd_sect);
-VBD_SHOW(wr_sect, "%d\n", be->blkif->st_wr_sect);
+VBD_SHOW(oo_req, "%llu\n", be->blkif->st_oo_req);
+VBD_SHOW(rd_req, "%llu\n", be->blkif->st_rd_req);
+VBD_SHOW(wr_req, "%llu\n", be->blkif->st_wr_req);
+VBD_SHOW(f_req, "%llu\n", be->blkif->st_f_req);
+VBD_SHOW(ds_req, "%llu\n", be->blkif->st_ds_req);
+VBD_SHOW(rd_sect, "%llu\n", be->blkif->st_rd_sect);
+VBD_SHOW(wr_sect, "%llu\n", be->blkif->st_wr_sect);
static struct attribute *xen_vbdstat_attrs[] = {
&dev_attr_oo_req.attr,
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/bitmap.h>
-#include <linux/llist.h>
+#include <linux/list.h>
#include <xen/xen.h>
#include <xen/xenbus.h>
struct grant {
grant_ref_t gref;
unsigned long pfn;
- struct llist_node node;
+ struct list_head node;
};
struct blk_shadow {
struct blkif_request req;
struct request *request;
- unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct grant *grants_used[BLKIF_MAX_SEGMENTS_PER_REQUEST];
};
struct work_struct work;
struct gnttab_free_callback callback;
struct blk_shadow shadow[BLK_RING_SIZE];
- struct llist_head persistent_gnts;
+ struct list_head persistent_gnts;
unsigned int persistent_gnts_c;
unsigned long shadow_free;
unsigned int feature_flush;
return 0;
}
+static int fill_grant_buffer(struct blkfront_info *info, int num)
+{
+ struct page *granted_page;
+ struct grant *gnt_list_entry, *n;
+ int i = 0;
+
+ while(i < num) {
+ gnt_list_entry = kzalloc(sizeof(struct grant), GFP_NOIO);
+ if (!gnt_list_entry)
+ goto out_of_memory;
+
+ granted_page = alloc_page(GFP_NOIO);
+ if (!granted_page) {
+ kfree(gnt_list_entry);
+ goto out_of_memory;
+ }
+
+ gnt_list_entry->pfn = page_to_pfn(granted_page);
+ gnt_list_entry->gref = GRANT_INVALID_REF;
+ list_add(&gnt_list_entry->node, &info->persistent_gnts);
+ i++;
+ }
+
+ return 0;
+
+out_of_memory:
+ list_for_each_entry_safe(gnt_list_entry, n,
+ &info->persistent_gnts, node) {
+ list_del(&gnt_list_entry->node);
+ __free_page(pfn_to_page(gnt_list_entry->pfn));
+ kfree(gnt_list_entry);
+ i--;
+ }
+ BUG_ON(i != 0);
+ return -ENOMEM;
+}
+
+static struct grant *get_grant(grant_ref_t *gref_head,
+ struct blkfront_info *info)
+{
+ struct grant *gnt_list_entry;
+ unsigned long buffer_mfn;
+
+ BUG_ON(list_empty(&info->persistent_gnts));
+ gnt_list_entry = list_first_entry(&info->persistent_gnts, struct grant,
+ node);
+ list_del(&gnt_list_entry->node);
+
+ if (gnt_list_entry->gref != GRANT_INVALID_REF) {
+ info->persistent_gnts_c--;
+ return gnt_list_entry;
+ }
+
+ /* Assign a gref to this page */
+ gnt_list_entry->gref = gnttab_claim_grant_reference(gref_head);
+ BUG_ON(gnt_list_entry->gref == -ENOSPC);
+ buffer_mfn = pfn_to_mfn(gnt_list_entry->pfn);
+ gnttab_grant_foreign_access_ref(gnt_list_entry->gref,
+ info->xbdev->otherend_id,
+ buffer_mfn, 0);
+ return gnt_list_entry;
+}
+
static const char *op_name(int op)
{
static const char *const names[] = {
static int blkif_queue_request(struct request *req)
{
struct blkfront_info *info = req->rq_disk->private_data;
- unsigned long buffer_mfn;
struct blkif_request *ring_req;
unsigned long id;
unsigned int fsect, lsect;
*/
bool new_persistent_gnts;
grant_ref_t gref_head;
- struct page *granted_page;
struct grant *gnt_list_entry = NULL;
struct scatterlist *sg;
fsect = sg->offset >> 9;
lsect = fsect + (sg->length >> 9) - 1;
- if (info->persistent_gnts_c) {
- BUG_ON(llist_empty(&info->persistent_gnts));
- gnt_list_entry = llist_entry(
- llist_del_first(&info->persistent_gnts),
- struct grant, node);
-
- ref = gnt_list_entry->gref;
- buffer_mfn = pfn_to_mfn(gnt_list_entry->pfn);
- info->persistent_gnts_c--;
- } else {
- ref = gnttab_claim_grant_reference(&gref_head);
- BUG_ON(ref == -ENOSPC);
-
- gnt_list_entry =
- kmalloc(sizeof(struct grant),
- GFP_ATOMIC);
- if (!gnt_list_entry)
- return -ENOMEM;
-
- granted_page = alloc_page(GFP_ATOMIC);
- if (!granted_page) {
- kfree(gnt_list_entry);
- return -ENOMEM;
- }
-
- gnt_list_entry->pfn =
- page_to_pfn(granted_page);
- gnt_list_entry->gref = ref;
-
- buffer_mfn = pfn_to_mfn(page_to_pfn(
- granted_page));
- gnttab_grant_foreign_access_ref(ref,
- info->xbdev->otherend_id,
- buffer_mfn, 0);
- }
+ gnt_list_entry = get_grant(&gref_head, info);
+ ref = gnt_list_entry->gref;
info->shadow[id].grants_used[i] = gnt_list_entry;
kunmap_atomic(shared_data);
}
- info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
ring_req->u.rw.seg[i] =
(struct blkif_request_segment) {
.gref = ref,
static void blkif_free(struct blkfront_info *info, int suspend)
{
- struct llist_node *all_gnts;
- struct grant *persistent_gnt, *tmp;
- struct llist_node *n;
+ struct grant *persistent_gnt;
+ struct grant *n;
/* Prevent new requests being issued until we fix things up. */
spin_lock_irq(&info->io_lock);
blk_stop_queue(info->rq);
/* Remove all persistent grants */
- if (info->persistent_gnts_c) {
- all_gnts = llist_del_all(&info->persistent_gnts);
- persistent_gnt = llist_entry(all_gnts, typeof(*(persistent_gnt)), node);
- while (persistent_gnt) {
- gnttab_end_foreign_access(persistent_gnt->gref, 0, 0UL);
+ if (!list_empty(&info->persistent_gnts)) {
+ list_for_each_entry_safe(persistent_gnt, n,
+ &info->persistent_gnts, node) {
+ list_del(&persistent_gnt->node);
+ if (persistent_gnt->gref != GRANT_INVALID_REF) {
+ gnttab_end_foreign_access(persistent_gnt->gref,
+ 0, 0UL);
+ info->persistent_gnts_c--;
+ }
__free_page(pfn_to_page(persistent_gnt->pfn));
- tmp = persistent_gnt;
- n = persistent_gnt->node.next;
- if (n)
- persistent_gnt = llist_entry(n, typeof(*(persistent_gnt)), node);
- else
- persistent_gnt = NULL;
- kfree(tmp);
+ kfree(persistent_gnt);
}
- info->persistent_gnts_c = 0;
}
+ BUG_ON(info->persistent_gnts_c != 0);
/* No more gnttab callback work. */
gnttab_cancel_free_callback(&info->callback);
}
/* Add the persistent grant into the list of free grants */
for (i = 0; i < s->req.u.rw.nr_segments; i++) {
- llist_add(&s->grants_used[i]->node, &info->persistent_gnts);
+ list_add(&s->grants_used[i]->node, &info->persistent_gnts);
info->persistent_gnts_c++;
}
}
sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+ /* Allocate memory for grants */
+ err = fill_grant_buffer(info, BLK_RING_SIZE *
+ BLKIF_MAX_SEGMENTS_PER_REQUEST);
+ if (err)
+ goto fail;
+
err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
if (err < 0) {
free_page((unsigned long)sring);
spin_lock_init(&info->io_lock);
info->xbdev = dev;
info->vdevice = vdevice;
- init_llist_head(&info->persistent_gnts);
+ INIT_LIST_HEAD(&info->persistent_gnts);
info->persistent_gnts_c = 0;
info->connected = BLKIF_STATE_DISCONNECTED;
INIT_WORK(&info->work, blkif_restart_queue);
int j;
/* Stage 1: Make a safe copy of the shadow state. */
- copy = kmalloc(sizeof(info->shadow),
+ copy = kmemdup(info->shadow, sizeof(info->shadow),
GFP_NOIO | __GFP_REPEAT | __GFP_HIGH);
if (!copy)
return -ENOMEM;
- memcpy(copy, info->shadow, sizeof(info->shadow));
/* Stage 2: Set up free list. */
memset(&info->shadow, 0, sizeof(info->shadow));
gnttab_grant_foreign_access_ref(
req->u.rw.seg[j].gref,
info->xbdev->otherend_id,
- pfn_to_mfn(info->shadow[req->u.rw.id].frame[j]),
+ pfn_to_mfn(copy[i].grants_used[j]->pfn),
0);
}
info->shadow[req->u.rw.id].req = *req;
{ USB_DEVICE(0x03F0, 0x311D) },
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
+ { USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
+ { USB_DEVICE(0x04CA, 0x3004) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x04CA, 0x3008) },
static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
/* Atheros 3012 with sflash firmware */
+ { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{
int err;
+ if (vq) {
+ /* We only support one device for now */
+ return -EBUSY;
+ }
/* We expect a single virtqueue. */
vq = virtio_find_single_vq(vdev, random_recv_done, "input");
- if (IS_ERR(vq))
- return PTR_ERR(vq);
+ if (IS_ERR(vq)) {
+ err = PTR_ERR(vq);
+ vq = NULL;
+ return err;
+ }
err = hwrng_register(&virtio_hwrng);
if (err) {
vdev->config->del_vqs(vdev);
+ vq = NULL;
return err;
}
busy = false;
hwrng_unregister(&virtio_hwrng);
vdev->config->del_vqs(vdev);
+ vq = NULL;
}
static int virtrng_probe(struct virtio_device *vdev)
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
+config COMMON_CLK_AXI_CLKGEN
+ tristate "AXI clkgen driver"
+ depends on ARCH_ZYNQ || MICROBLAZE
+ help
+ ---help---
+ Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
+ FPGAs. It is commonly used in Analog Devices' reference designs.
+
endmenu
source "drivers/clk/mvebu/Kconfig"
obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
obj-$(CONFIG_COMMON_CLK) += clk-gate.o
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
+obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
obj-$(CONFIG_X86) += x86/
# Chip specific
+obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
--- /dev/null
+/*
+ * AXI clkgen driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#define AXI_CLKGEN_REG_UPDATE_ENABLE 0x04
+#define AXI_CLKGEN_REG_CLK_OUT1 0x08
+#define AXI_CLKGEN_REG_CLK_OUT2 0x0c
+#define AXI_CLKGEN_REG_CLK_DIV 0x10
+#define AXI_CLKGEN_REG_CLK_FB1 0x14
+#define AXI_CLKGEN_REG_CLK_FB2 0x18
+#define AXI_CLKGEN_REG_LOCK1 0x1c
+#define AXI_CLKGEN_REG_LOCK2 0x20
+#define AXI_CLKGEN_REG_LOCK3 0x24
+#define AXI_CLKGEN_REG_FILTER1 0x28
+#define AXI_CLKGEN_REG_FILTER2 0x2c
+
+struct axi_clkgen {
+ void __iomem *base;
+ struct clk_hw clk_hw;
+};
+
+static uint32_t axi_clkgen_lookup_filter(unsigned int m)
+{
+ switch (m) {
+ case 0:
+ return 0x01001990;
+ case 1:
+ return 0x01001190;
+ case 2:
+ return 0x01009890;
+ case 3:
+ return 0x01001890;
+ case 4:
+ return 0x01008890;
+ case 5 ... 8:
+ return 0x01009090;
+ case 9 ... 11:
+ return 0x01000890;
+ case 12:
+ return 0x08009090;
+ case 13 ... 22:
+ return 0x01001090;
+ case 23 ... 36:
+ return 0x01008090;
+ case 37 ... 46:
+ return 0x08001090;
+ default:
+ return 0x08008090;
+ }
+}
+
+static const uint32_t axi_clkgen_lock_table[] = {
+ 0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8,
+ 0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8,
+ 0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339,
+ 0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271,
+ 0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4,
+ 0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190,
+ 0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e,
+ 0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c,
+ 0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113,
+};
+
+static uint32_t axi_clkgen_lookup_lock(unsigned int m)
+{
+ if (m < ARRAY_SIZE(axi_clkgen_lock_table))
+ return axi_clkgen_lock_table[m];
+ return 0x1f1f00fa;
+}
+
+static const unsigned int fpfd_min = 10000;
+static const unsigned int fpfd_max = 300000;
+static const unsigned int fvco_min = 600000;
+static const unsigned int fvco_max = 1200000;
+
+static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
+ unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
+{
+ unsigned long d, d_min, d_max, _d_min, _d_max;
+ unsigned long m, m_min, m_max;
+ unsigned long f, dout, best_f, fvco;
+
+ fin /= 1000;
+ fout /= 1000;
+
+ best_f = ULONG_MAX;
+ *best_d = 0;
+ *best_m = 0;
+ *best_dout = 0;
+
+ d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
+ d_max = min_t(unsigned long, fin / fpfd_min, 80);
+
+ m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1);
+ m_max = min_t(unsigned long, fvco_max * d_max / fin, 64);
+
+ for (m = m_min; m <= m_max; m++) {
+ _d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max));
+ _d_max = min(d_max, fin * m / fvco_min);
+
+ for (d = _d_min; d <= _d_max; d++) {
+ fvco = fin * m / d;
+
+ dout = DIV_ROUND_CLOSEST(fvco, fout);
+ dout = clamp_t(unsigned long, dout, 1, 128);
+ f = fvco / dout;
+ if (abs(f - fout) < abs(best_f - fout)) {
+ best_f = f;
+ *best_d = d;
+ *best_m = m;
+ *best_dout = dout;
+ if (best_f == fout)
+ return;
+ }
+ }
+ }
+}
+
+static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low,
+ unsigned int *high, unsigned int *edge, unsigned int *nocount)
+{
+ if (divider == 1)
+ *nocount = 1;
+ else
+ *nocount = 0;
+
+ *high = divider / 2;
+ *edge = divider % 2;
+ *low = divider - *high;
+}
+
+static void axi_clkgen_write(struct axi_clkgen *axi_clkgen,
+ unsigned int reg, unsigned int val)
+{
+ writel(val, axi_clkgen->base + reg);
+}
+
+static void axi_clkgen_read(struct axi_clkgen *axi_clkgen,
+ unsigned int reg, unsigned int *val)
+{
+ *val = readl(axi_clkgen->base + reg);
+}
+
+static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw)
+{
+ return container_of(clk_hw, struct axi_clkgen, clk_hw);
+}
+
+static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+ unsigned int d, m, dout;
+ unsigned int nocount;
+ unsigned int high;
+ unsigned int edge;
+ unsigned int low;
+ uint32_t filter;
+ uint32_t lock;
+
+ if (parent_rate == 0 || rate == 0)
+ return -EINVAL;
+
+ axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
+
+ if (d == 0 || dout == 0 || m == 0)
+ return -EINVAL;
+
+ filter = axi_clkgen_lookup_filter(m - 1);
+ lock = axi_clkgen_lookup_lock(m - 1);
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 0);
+
+ axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1,
+ (high << 6) | low);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT2,
+ (edge << 7) | (nocount << 6));
+
+ axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV,
+ (edge << 13) | (nocount << 12) | (high << 6) | low);
+
+ axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1,
+ (high << 6) | low);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB2,
+ (edge << 7) | (nocount << 6));
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK1, lock & 0x3ff);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK2,
+ (((lock >> 16) & 0x1f) << 10) | 0x1);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK3,
+ (((lock >> 24) & 0x1f) << 10) | 0x3e9);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER1, filter >> 16);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER2, filter);
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 1);
+
+ return 0;
+}
+
+static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned int d, m, dout;
+
+ axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
+
+ if (d == 0 || dout == 0 || m == 0)
+ return -EINVAL;
+
+ return *parent_rate / d * m / dout;
+}
+
+static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
+ unsigned long parent_rate)
+{
+ struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+ unsigned int d, m, dout;
+ unsigned int reg;
+ unsigned long long tmp;
+
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, ®);
+ dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, ®);
+ d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, ®);
+ m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+
+ if (d == 0 || dout == 0)
+ return 0;
+
+ tmp = (unsigned long long)(parent_rate / d) * m;
+ do_div(tmp, dout);
+
+ if (tmp > ULONG_MAX)
+ return ULONG_MAX;
+
+ return tmp;
+}
+
+static const struct clk_ops axi_clkgen_ops = {
+ .recalc_rate = axi_clkgen_recalc_rate,
+ .round_rate = axi_clkgen_round_rate,
+ .set_rate = axi_clkgen_set_rate,
+};
+
+static int axi_clkgen_probe(struct platform_device *pdev)
+{
+ struct axi_clkgen *axi_clkgen;
+ struct clk_init_data init;
+ const char *parent_name;
+ const char *clk_name;
+ struct resource *mem;
+ struct clk *clk;
+
+ axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
+ if (!axi_clkgen)
+ return -ENOMEM;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ axi_clkgen->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(axi_clkgen->base))
+ return PTR_ERR(axi_clkgen->base);
+
+ parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
+ if (!parent_name)
+ return -EINVAL;
+
+ clk_name = pdev->dev.of_node->name;
+ of_property_read_string(pdev->dev.of_node, "clock-output-names",
+ &clk_name);
+
+ init.name = clk_name;
+ init.ops = &axi_clkgen_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ axi_clkgen->clk_hw.init = &init;
+ clk = devm_clk_register(&pdev->dev, &axi_clkgen->clk_hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
+ clk);
+}
+
+static int axi_clkgen_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id axi_clkgen_ids[] = {
+ { .compatible = "adi,axi-clkgen-1.00.a" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
+
+static struct platform_driver axi_clkgen_driver = {
+ .driver = {
+ .name = "adi-axi-clkgen",
+ .owner = THIS_MODULE,
+ .of_match_table = axi_clkgen_ids,
+ },
+ .probe = axi_clkgen_probe,
+ .remove = axi_clkgen_remove,
+};
+module_platform_driver(axi_clkgen_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator");
--- /dev/null
+/*
+ * Copyright (c) 2013 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+
+static u8 clk_composite_get_parent(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *mux_ops = composite->mux_ops;
+ struct clk_hw *mux_hw = composite->mux_hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->get_parent(mux_hw);
+}
+
+static int clk_composite_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *mux_ops = composite->mux_ops;
+ struct clk_hw *mux_hw = composite->mux_hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->set_parent(mux_hw, index);
+}
+
+static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->recalc_rate(div_hw, parent_rate);
+}
+
+static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->round_rate(div_hw, rate, prate);
+}
+
+static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->set_rate(div_hw, rate, parent_rate);
+}
+
+static int clk_composite_is_enabled(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->is_enabled(gate_hw);
+}
+
+static int clk_composite_enable(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->enable(gate_hw);
+}
+
+static void clk_composite_disable(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ gate_ops->disable(gate_hw);
+}
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+ const char **parent_names, int num_parents,
+ struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+ struct clk_hw *div_hw, const struct clk_ops *div_ops,
+ struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+ unsigned long flags)
+{
+ struct clk *clk;
+ struct clk_init_data init;
+ struct clk_composite *composite;
+ struct clk_ops *clk_composite_ops;
+
+ composite = kzalloc(sizeof(*composite), GFP_KERNEL);
+ if (!composite) {
+ pr_err("%s: could not allocate composite clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ clk_composite_ops = &composite->ops;
+
+ if (mux_hw && mux_ops) {
+ if (!mux_ops->get_parent || !mux_ops->set_parent) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->mux_hw = mux_hw;
+ composite->mux_ops = mux_ops;
+ clk_composite_ops->get_parent = clk_composite_get_parent;
+ clk_composite_ops->set_parent = clk_composite_set_parent;
+ }
+
+ if (div_hw && div_ops) {
+ if (!div_ops->recalc_rate || !div_ops->round_rate ||
+ !div_ops->set_rate) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->div_hw = div_hw;
+ composite->div_ops = div_ops;
+ clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
+ clk_composite_ops->round_rate = clk_composite_round_rate;
+ clk_composite_ops->set_rate = clk_composite_set_rate;
+ }
+
+ if (gate_hw && gate_ops) {
+ if (!gate_ops->is_enabled || !gate_ops->enable ||
+ !gate_ops->disable) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->gate_hw = gate_hw;
+ composite->gate_ops = gate_ops;
+ clk_composite_ops->is_enabled = clk_composite_is_enabled;
+ clk_composite_ops->enable = clk_composite_enable;
+ clk_composite_ops->disable = clk_composite_disable;
+ }
+
+ init.ops = clk_composite_ops;
+ composite->hw.init = &init;
+
+ clk = clk_register(dev, &composite->hw);
+ if (IS_ERR(clk))
+ goto err;
+
+ if (composite->mux_hw)
+ composite->mux_hw->clk = clk;
+
+ if (composite->div_hw)
+ composite->div_hw->clk = clk;
+
+ if (composite->gate_hw)
+ composite->gate_hw->clk = clk;
+
+ return clk;
+
+err:
+ kfree(composite);
+ return clk;
+}
div = _get_div(divider, val);
if (!div) {
- WARN(1, "%s: Invalid divisor for clock %s\n", __func__,
- __clk_get_name(hw->clk));
+ WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
+ "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
+ __clk_get_name(hw->clk));
return parent_rate;
}
static u8 clk_mux_get_parent(struct clk_hw *hw)
{
struct clk_mux *mux = to_clk_mux(hw);
+ int num_parents = __clk_get_num_parents(hw->clk);
u32 val;
/*
* val = 0x4 really means "bit 2, index starts at bit 0"
*/
val = readl(mux->reg) >> mux->shift;
- val &= (1 << mux->width) - 1;
+ val &= mux->mask;
+
+ if (mux->table) {
+ int i;
+
+ for (i = 0; i < num_parents; i++)
+ if (mux->table[i] == val)
+ return i;
+ return -EINVAL;
+ }
if (val && (mux->flags & CLK_MUX_INDEX_BIT))
val = ffs(val) - 1;
if (val && (mux->flags & CLK_MUX_INDEX_ONE))
val--;
- if (val >= __clk_get_num_parents(hw->clk))
+ if (val >= num_parents)
return -EINVAL;
return val;
u32 val;
unsigned long flags = 0;
- if (mux->flags & CLK_MUX_INDEX_BIT)
- index = (1 << ffs(index));
+ if (mux->table)
+ index = mux->table[index];
- if (mux->flags & CLK_MUX_INDEX_ONE)
- index++;
+ else {
+ if (mux->flags & CLK_MUX_INDEX_BIT)
+ index = (1 << ffs(index));
+
+ if (mux->flags & CLK_MUX_INDEX_ONE)
+ index++;
+ }
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
val = readl(mux->reg);
- val &= ~(((1 << mux->width) - 1) << mux->shift);
+ val &= ~(mux->mask << mux->shift);
val |= index << mux->shift;
writel(val, mux->reg);
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
-struct clk *clk_register_mux(struct device *dev, const char *name,
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
- void __iomem *reg, u8 shift, u8 width,
- u8 clk_mux_flags, spinlock_t *lock)
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table, spinlock_t *lock)
{
struct clk_mux *mux;
struct clk *clk;
/* struct clk_mux assignments */
mux->reg = reg;
mux->shift = shift;
- mux->width = width;
+ mux->mask = mask;
mux->flags = clk_mux_flags;
mux->lock = lock;
+ mux->table = table;
mux->hw.init = &init;
clk = clk_register(dev, &mux->hw);
return clk;
}
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mux_flags, spinlock_t *lock)
+{
+ u32 mask = BIT(width) - 1;
+
+ return clk_register_mux_table(dev, name, parent_names, num_parents,
+ flags, reg, shift, mask, clk_mux_flags,
+ NULL, lock);
+}
for (i = pll1; i < maxclk; i++) {
prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
- BUG_ON(!prima2_clks[i]);
+ BUG_ON(IS_ERR(prima2_clks[i]));
}
clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
clk_register_clkdev(prima2_clks[io], NULL, "io");
divisor = parent_rate / rate;
/* If prate / rate would be decimal, incr the divisor */
- if (rate * divisor < *prate)
+ if (rate * divisor < parent_rate)
divisor++;
if (divisor == cdev->div_mask + 1)
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/clk-provider.h>
+#include <linux/clk/zynq.h>
static void __iomem *slcr_base;
#include <linux/of.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/sched.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
+static struct task_struct *prepare_owner;
+static struct task_struct *enable_owner;
+
+static int prepare_refcnt;
+static int enable_refcnt;
+
static HLIST_HEAD(clk_root_list);
static HLIST_HEAD(clk_orphan_list);
static LIST_HEAD(clk_notifier_list);
+/*** locking ***/
+static void clk_prepare_lock(void)
+{
+ if (!mutex_trylock(&prepare_lock)) {
+ if (prepare_owner == current) {
+ prepare_refcnt++;
+ return;
+ }
+ mutex_lock(&prepare_lock);
+ }
+ WARN_ON_ONCE(prepare_owner != NULL);
+ WARN_ON_ONCE(prepare_refcnt != 0);
+ prepare_owner = current;
+ prepare_refcnt = 1;
+}
+
+static void clk_prepare_unlock(void)
+{
+ WARN_ON_ONCE(prepare_owner != current);
+ WARN_ON_ONCE(prepare_refcnt == 0);
+
+ if (--prepare_refcnt)
+ return;
+ prepare_owner = NULL;
+ mutex_unlock(&prepare_lock);
+}
+
+static unsigned long clk_enable_lock(void)
+{
+ unsigned long flags;
+
+ if (!spin_trylock_irqsave(&enable_lock, flags)) {
+ if (enable_owner == current) {
+ enable_refcnt++;
+ return flags;
+ }
+ spin_lock_irqsave(&enable_lock, flags);
+ }
+ WARN_ON_ONCE(enable_owner != NULL);
+ WARN_ON_ONCE(enable_refcnt != 0);
+ enable_owner = current;
+ enable_refcnt = 1;
+ return flags;
+}
+
+static void clk_enable_unlock(unsigned long flags)
+{
+ WARN_ON_ONCE(enable_owner != current);
+ WARN_ON_ONCE(enable_refcnt == 0);
+
+ if (--enable_refcnt)
+ return;
+ enable_owner = NULL;
+ spin_unlock_irqrestore(&enable_lock, flags);
+}
+
/*** debugfs support ***/
#ifdef CONFIG_COMMON_CLK_DEBUG
seq_printf(s, " clock enable_cnt prepare_cnt rate\n");
seq_printf(s, "---------------------------------------------------------------------\n");
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(c, &clk_root_list, child_node)
clk_summary_show_subtree(s, c, 0);
hlist_for_each_entry(c, &clk_orphan_list, child_node)
clk_summary_show_subtree(s, c, 0);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return 0;
}
seq_printf(s, "{");
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(c, &clk_root_list, child_node) {
if (!first_node)
clk_dump_subtree(s, c, 0);
}
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
seq_printf(s, "}");
return 0;
if (!orphandir)
return -ENOMEM;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(clk, &clk_root_list, child_node)
clk_debug_create_subtree(clk, rootdir);
inited = 1;
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return 0;
}
static inline int clk_debug_register(struct clk *clk) { return 0; }
#endif
+/* caller must hold prepare_lock */
+static void clk_unprepare_unused_subtree(struct clk *clk)
+{
+ struct clk *child;
+
+ if (!clk)
+ return;
+
+ hlist_for_each_entry(child, &clk->children, child_node)
+ clk_unprepare_unused_subtree(child);
+
+ if (clk->prepare_count)
+ return;
+
+ if (clk->flags & CLK_IGNORE_UNUSED)
+ return;
+
+ if (__clk_is_prepared(clk)) {
+ if (clk->ops->unprepare_unused)
+ clk->ops->unprepare_unused(clk->hw);
+ else if (clk->ops->unprepare)
+ clk->ops->unprepare(clk->hw);
+ }
+}
+
/* caller must hold prepare_lock */
static void clk_disable_unused_subtree(struct clk *clk)
{
hlist_for_each_entry(child, &clk->children, child_node)
clk_disable_unused_subtree(child);
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
goto unlock_out;
}
unlock_out:
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
out:
return;
{
struct clk *clk;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(clk, &clk_root_list, child_node)
clk_disable_unused_subtree(clk);
hlist_for_each_entry(clk, &clk_orphan_list, child_node)
clk_disable_unused_subtree(clk);
- mutex_unlock(&prepare_lock);
+ hlist_for_each_entry(clk, &clk_root_list, child_node)
+ clk_unprepare_unused_subtree(clk);
+
+ hlist_for_each_entry(clk, &clk_orphan_list, child_node)
+ clk_unprepare_unused_subtree(clk);
+
+ clk_prepare_unlock();
return 0;
}
return !clk ? 0 : clk->flags;
}
+bool __clk_is_prepared(struct clk *clk)
+{
+ int ret;
+
+ if (!clk)
+ return false;
+
+ /*
+ * .is_prepared is optional for clocks that can prepare
+ * fall back to software usage counter if it is missing
+ */
+ if (!clk->ops->is_prepared) {
+ ret = clk->prepare_count ? 1 : 0;
+ goto out;
+ }
+
+ ret = clk->ops->is_prepared(clk->hw);
+out:
+ return !!ret;
+}
+
bool __clk_is_enabled(struct clk *clk)
{
int ret;
*/
void clk_unprepare(struct clk *clk)
{
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
__clk_unprepare(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
}
EXPORT_SYMBOL_GPL(clk_unprepare);
{
int ret;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
ret = __clk_prepare(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
unsigned long flags;
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
__clk_disable(clk);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
}
EXPORT_SYMBOL_GPL(clk_disable);
unsigned long flags;
int ret;
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
ret = __clk_enable(clk);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
return ret;
}
{
unsigned long ret;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
ret = __clk_round_rate(clk, rate);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
unsigned long rate;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
__clk_recalc_rates(clk, 0);
rate = __clk_get_rate(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return rate;
}
int ret = NOTIFY_DONE;
if (clk->rate == clk->new_rate)
- return 0;
+ return NULL;
if (clk->notifier_count) {
ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
int ret = 0;
/* prevent racing with updates to the clock topology */
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* bail early if nothing to do */
if (rate == clk->rate)
clk_change_rate(top);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
struct clk *parent;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
parent = __clk_get_parent(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return parent;
}
__clk_prepare(parent);
/* FIXME replace with clk_is_enabled(clk) someday */
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
__clk_enable(parent);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
/* change clock input source */
ret = clk->ops->set_parent(clk->hw, i);
/* clean up old prepare and enable */
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
__clk_disable(old_parent);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
if (clk->prepare_count)
__clk_unprepare(old_parent);
return -ENOSYS;
/* prevent racing with updates to the clock topology */
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
if (clk->parent == parent)
goto out;
__clk_reparent(clk, parent);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* check to see if a clock with this name is already registered */
if (__clk_lookup(clk->name)) {
clk_debug_register(clk);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk || !nb)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* search the list of notifiers for this clk */
list_for_each_entry(cn, &clk_notifier_list, node)
clk->notifier_count++;
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk || !nb)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
list_for_each_entry(cn, &clk_notifier_list, node)
if (cn->clk == clk)
ret = -ENOENT;
}
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
#include <linux/io.h>
#include <linux/of.h>
#include <linux/delay.h>
-#include "clk-cpu.h"
#define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET 0x0
#define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET 0xC
kfree(cpuclk);
}
-static const __initconst struct of_device_id clk_cpu_match[] = {
- {
- .compatible = "marvell,armada-xp-cpu-clock",
- .data = of_cpu_clk_setup,
- },
- {
- /* sentinel */
- },
-};
-
-void __init mvebu_cpu_clk_init(void)
-{
- of_clk_init(clk_cpu_match);
-}
+CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
+ of_cpu_clk_setup);
+++ /dev/null
-/*
- * Marvell MVEBU CPU clock handling.
- *
- * Copyright (C) 2012 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MVEBU_CLK_CPU_H
-#define __MVEBU_CLK_CPU_H
-
-#ifdef CONFIG_MVEBU_CLK_CPU
-void __init mvebu_cpu_clk_init(void);
-#else
-static inline void mvebu_cpu_clk_init(void) {}
-#endif
-
-#endif
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/clk/mvebu.h>
#include <linux/of.h>
#include "clk-core.h"
-#include "clk-cpu.h"
#include "clk-gating-ctrl.h"
void __init mvebu_clocks_init(void)
{
mvebu_core_clk_init();
mvebu_gating_clk_init();
- mvebu_cpu_clk_init();
+ of_clk_init(NULL);
}
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx23.h>
+#include <linux/of_address.h>
#include "clk.h"
-#define DIGCTRL MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-#define CLKCTRL MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+static void __iomem *digctrl;
+
+#define CLKCTRL clkctrl
+#define DIGCTRL digctrl
+
#define PLLCTRL0 (CLKCTRL + 0x0000)
#define CPU (CLKCTRL + 0x0020)
#define HBUS (CLKCTRL + 0x0030)
u32 val;
/* Gate off cpu clock in WFI for power saving */
- __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+ writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
/* Clear BYPASS for SAIF */
- __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ);
+ writel_relaxed(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ + CLR);
/* SAIF has to use frac div for functional operation */
val = readl_relaxed(SAIF);
* Source ssp clock from ref_io than ref_xtal,
* as ref_xtal only provides 24 MHz as maximum.
*/
- __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ);
+ writel_relaxed(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ + CLR);
/*
* 480 MHz seems too high to be ssp clock source directly,
* so set frac to get a 288 MHz ref_io.
*/
- __mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC);
- __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
+ writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR);
+ writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET);
}
static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
struct device_node *np;
u32 i;
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+ digctrl = of_iomap(np, 0);
+ WARN_ON(!digctrl);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+ clkctrl = of_iomap(np, 0);
+ WARN_ON(!clkctrl);
+
clk_misc_init();
clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
return PTR_ERR(clks[i]);
}
- np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
- if (np) {
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
-
- clk_register_clkdev(clks[clk32k], NULL, "timrot");
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
- mxs_timer_init();
-
return 0;
}
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx28.h>
+#include <linux/of_address.h>
#include "clk.h"
-#define CLKCTRL MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+#define CLKCTRL clkctrl
+
#define PLL0CTRL0 (CLKCTRL + 0x0000)
#define PLL1CTRL0 (CLKCTRL + 0x0020)
#define PLL2CTRL0 (CLKCTRL + 0x0040)
#define BP_FRAC0_IO1FRAC 16
#define BP_FRAC0_IO0FRAC 24
-#define DIGCTRL MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+static void __iomem *digctrl;
+#define DIGCTRL digctrl
#define BP_SAIF_CLKMUX 10
/*
if (clkmux > 0x3)
return -EINVAL;
- __mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL);
- __mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL);
+ writel_relaxed(0x3 << BP_SAIF_CLKMUX, DIGCTRL + CLR);
+ writel_relaxed(clkmux << BP_SAIF_CLKMUX, DIGCTRL + SET);
return 0;
}
u32 val;
/* Gate off cpu clock in WFI for power saving */
- __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+ writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
/* 0 is a bad default value for a divider */
- __mxs_setl(1 << BP_ENET_DIV_TIME, ENET);
+ writel_relaxed(1 << BP_ENET_DIV_TIME, ENET + SET);
/* Clear BYPASS for SAIF */
- __mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ);
+ writel_relaxed(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ + CLR);
/* SAIF has to use frac div for functional operation */
val = readl_relaxed(SAIF0);
* Source ssp clock from ref_io than ref_xtal,
* as ref_xtal only provides 24 MHz as maximum.
*/
- __mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ);
+ writel_relaxed(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ + CLR);
/*
* 480 MHz seems too high to be ssp clock source directly,
struct device_node *np;
u32 i;
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+ digctrl = of_iomap(np, 0);
+ WARN_ON(!digctrl);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
+ clkctrl = of_iomap(np, 0);
+ WARN_ON(!clkctrl);
+
clk_misc_init();
clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
return PTR_ERR(clks[i]);
}
- np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
- if (np) {
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[xbus], NULL, "timrot");
clk_register_clkdev(clks[enet_out], NULL, "enet_out");
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
- mxs_timer_init();
-
return 0;
}
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/spinlock.h>
+#include "clk.h"
DEFINE_SPINLOCK(mxs_lock);
SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0100000.spdif-in");
- clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
+ clk = clk_register_gate(NULL, "acp_clk", "ahb_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "acp_clk");
- clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
+ clk = clk_register_gate(NULL, "plgpio_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e2800000.gpio");
- clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
+ clk = clk_register_gate(NULL, "video_dec_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_dec");
- clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
+ clk = clk_register_gate(NULL, "video_enc_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_enc");
- clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
+ clk = clk_register_gate(NULL, "video_in_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_vip");
- clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
+ clk = clk_register_gate(NULL, "cam0_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0200000.cam0");
- clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
+ clk = clk_register_gate(NULL, "cam1_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0300000.cam1");
- clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
+ clk = clk_register_gate(NULL, "cam2_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0400000.cam2");
- clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
+ clk = clk_register_gate(NULL, "cam3_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0500000.cam3");
--- /dev/null
+#
+# Makefile for sunxi specific clk
+#
+
+obj-y += clk-sunxi.o clk-factors.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adjustable factor-based clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include <linux/delay.h>
+
+#include "clk-factors.h"
+
+/*
+ * DOC: basic adjustable factor-based clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.
+ * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+struct clk_factors {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct clk_factors_config *config;
+ void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+ spinlock_t *lock;
+};
+
+#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos))
+#define CLRMASK(len, pos) (~(SETMASK(len, pos)))
+#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit))
+
+#define FACTOR_SET(bit, len, reg, val) \
+ (((reg) & CLRMASK(len, bit)) | (val << (bit)))
+
+static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u8 n = 1, k = 0, p = 0, m = 0;
+ u32 reg;
+ unsigned long rate;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Get each individual factor if applicable */
+ if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ n = FACTOR_GET(config->nshift, config->nwidth, reg);
+ if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ k = FACTOR_GET(config->kshift, config->kwidth, reg);
+ if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ m = FACTOR_GET(config->mshift, config->mwidth, reg);
+ if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ p = FACTOR_GET(config->pshift, config->pwidth, reg);
+
+ /* Calculate the rate */
+ rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+
+ return rate;
+}
+
+static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_factors *factors = to_clk_factors(hw);
+ factors->get_factors((u32 *)&rate, (u32)*parent_rate,
+ NULL, NULL, NULL, NULL);
+
+ return rate;
+}
+
+static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u8 n, k, m, p;
+ u32 reg;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+ unsigned long flags = 0;
+
+ factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+
+ if (factors->lock)
+ spin_lock_irqsave(factors->lock, flags);
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Set up the new factors - macros do not do anything if width is 0 */
+ reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
+ reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
+ reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
+ reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+
+ /* Apply them now */
+ writel(reg, factors->reg);
+
+ /* delay 500us so pll stabilizes */
+ __delay((rate >> 20) * 500 / 2);
+
+ if (factors->lock)
+ spin_unlock_irqrestore(factors->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_factors_ops = {
+ .recalc_rate = clk_factors_recalc_rate,
+ .round_rate = clk_factors_round_rate,
+ .set_rate = clk_factors_set_rate,
+};
+
+/**
+ * clk_register_factors - register a factors clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust factors
+ * @config: shift and width of factors n, k, m and p
+ * @get_factors: function to calculate the factors for a given frequency
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors)(u32 *rate, u32 parent,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock)
+{
+ struct clk_factors *factors;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the factors */
+ factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+ if (!factors) {
+ pr_err("%s: could not allocate factors clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clk_factors_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_factors assignments */
+ factors->reg = reg;
+ factors->config = config;
+ factors->lock = lock;
+ factors->hw.init = &init;
+ factors->get_factors = get_factors;
+
+ /* register the clock */
+ clk = clk_register(dev, &factors->hw);
+
+ if (IS_ERR(clk))
+ kfree(factors);
+
+ return clk;
+}
--- /dev/null
+#ifndef __MACH_SUNXI_CLK_FACTORS_H
+#define __MACH_SUNXI_CLK_FACTORS_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define SUNXI_FACTORS_NOT_APPLICABLE (0)
+
+struct clk_factors_config {
+ u8 nshift;
+ u8 nwidth;
+ u8 kshift;
+ u8 kwidth;
+ u8 mshift;
+ u8 mwidth;
+ u8 pshift;
+ u8 pwidth;
+};
+
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors) (u32 *rate, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock);
+#endif
--- /dev/null
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/sunxi.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk-factors.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+/**
+ * sunxi_osc_clk_setup() - Setup function for gatable oscillator
+ */
+
+#define SUNXI_OSC24M_GATE 0
+
+static void __init sunxi_osc_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_gate(NULL, clk_name, parent, 0, reg,
+ SUNXI_OSC24M_GATE, 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+ * parent_rate is always 24Mhz
+ */
+
+static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div;
+
+ /* Normalize value to a 6M multiple */
+ div = *freq / 6000000;
+ *freq = 6000000 * div;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ /* m is always zero for pll1 */
+ *m = 0;
+
+ /* k is 1 only on these cases */
+ if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
+ *k = 1;
+ else
+ *k = 0;
+
+ /* p will be 3 for divs under 10 */
+ if (div < 10)
+ *p = 3;
+
+ /* p will be 2 for divs between 10 - 20 and odd divs under 32 */
+ else if (div < 20 || (div < 32 && (div & 1)))
+ *p = 2;
+
+ /* p will be 1 for even divs under 32, divs under 40 and odd pairs
+ * of divs between 40-62 */
+ else if (div < 40 || (div < 64 && (div & 2)))
+ *p = 1;
+
+ /* any other entries have p = 0 */
+ else
+ *p = 0;
+
+ /* calculate a suitable n based on k and p */
+ div <<= *p;
+ div /= (*k + 1);
+ *n = div / 4;
+}
+
+
+
+/**
+ * sunxi_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 calcm, calcp;
+
+ if (parent_rate < *freq)
+ *freq = parent_rate;
+
+ parent_rate = (parent_rate + (*freq - 1)) / *freq;
+
+ /* Invalid rate! */
+ if (parent_rate > 32)
+ return;
+
+ if (parent_rate <= 4)
+ calcp = 0;
+ else if (parent_rate <= 8)
+ calcp = 1;
+ else if (parent_rate <= 16)
+ calcp = 2;
+ else
+ calcp = 3;
+
+ calcm = (parent_rate >> calcp) - 1;
+
+ *freq = (parent_rate >> calcp) / (calcm + 1);
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ *m = calcm;
+ *p = calcp;
+}
+
+
+
+/**
+ * sunxi_factors_clk_setup() - Setup function for factor clocks
+ */
+
+struct factors_data {
+ struct clk_factors_config *table;
+ void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+};
+
+static struct clk_factors_config pll1_config = {
+ .nshift = 8,
+ .nwidth = 5,
+ .kshift = 4,
+ .kwidth = 2,
+ .mshift = 0,
+ .mwidth = 2,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static struct clk_factors_config apb1_config = {
+ .mshift = 0,
+ .mwidth = 5,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static const __initconst struct factors_data pll1_data = {
+ .table = &pll1_config,
+ .getter = sunxi_get_pll1_factors,
+};
+
+static const __initconst struct factors_data apb1_data = {
+ .table = &apb1_config,
+ .getter = sunxi_get_apb1_factors,
+};
+
+static void __init sunxi_factors_clk_setup(struct device_node *node,
+ struct factors_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_factors(NULL, clk_name, parent, 0, reg,
+ data->table, data->getter, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_mux_clk_setup() - Setup function for muxes
+ */
+
+#define SUNXI_MUX_GATE_WIDTH 2
+
+struct mux_data {
+ u8 shift;
+};
+
+static const __initconst struct mux_data cpu_data = {
+ .shift = 16,
+};
+
+static const __initconst struct mux_data apb1_mux_data = {
+ .shift = 24,
+};
+
+static void __init sunxi_mux_clk_setup(struct device_node *node,
+ struct mux_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parents[5];
+ void *reg;
+ int i = 0;
+
+ reg = of_iomap(node, 0);
+
+ while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+ i++;
+
+ clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg,
+ data->shift, SUNXI_MUX_GATE_WIDTH,
+ 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_divider_clk_setup() - Setup function for simple divider clocks
+ */
+
+#define SUNXI_DIVISOR_WIDTH 2
+
+struct div_data {
+ u8 shift;
+ u8 pow;
+};
+
+static const __initconst struct div_data axi_data = {
+ .shift = 0,
+ .pow = 0,
+};
+
+static const __initconst struct div_data ahb_data = {
+ .shift = 4,
+ .pow = 1,
+};
+
+static const __initconst struct div_data apb0_data = {
+ .shift = 8,
+ .pow = 1,
+};
+
+static void __init sunxi_divider_clk_setup(struct device_node *node,
+ struct div_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *clk_parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ clk_parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
+ reg, data->shift, SUNXI_DIVISOR_WIDTH,
+ data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
+ &clk_lock);
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
+ */
+
+#define SUNXI_GATES_MAX_SIZE 64
+
+struct gates_data {
+ DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
+};
+
+static const __initconst struct gates_data axi_gates_data = {
+ .mask = {1},
+};
+
+static const __initconst struct gates_data ahb_gates_data = {
+ .mask = {0x7F77FFF, 0x14FB3F},
+};
+
+static const __initconst struct gates_data apb0_gates_data = {
+ .mask = {0x4EF},
+};
+
+static const __initconst struct gates_data apb1_gates_data = {
+ .mask = {0xFF00F7},
+};
+
+static void __init sunxi_gates_clk_setup(struct device_node *node,
+ struct gates_data *data)
+{
+ struct clk_onecell_data *clk_data;
+ const char *clk_parent;
+ const char *clk_name;
+ void *reg;
+ int qty;
+ int i = 0;
+ int j = 0;
+ int ignore;
+
+ reg = of_iomap(node, 0);
+
+ clk_parent = of_clk_get_parent_name(node, 0);
+
+ /* Worst-case size approximation and memory allocation */
+ qty = find_last_bit(data->mask, SUNXI_GATES_MAX_SIZE);
+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+ if (!clk_data)
+ return;
+ clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL);
+ if (!clk_data->clks) {
+ kfree(clk_data);
+ return;
+ }
+
+ for_each_set_bit(i, data->mask, SUNXI_GATES_MAX_SIZE) {
+ of_property_read_string_index(node, "clock-output-names",
+ j, &clk_name);
+
+ /* No driver claims this clock, but it should remain gated */
+ ignore = !strcmp("ahb_sdram", clk_name) ? CLK_IGNORE_UNUSED : 0;
+
+ clk_data->clks[i] = clk_register_gate(NULL, clk_name,
+ clk_parent, ignore,
+ reg + 4 * (i/32), i % 32,
+ 0, &clk_lock);
+ WARN_ON(IS_ERR(clk_data->clks[i]));
+
+ j++;
+ }
+
+ /* Adjust to the real max */
+ clk_data->clk_num = i;
+
+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+}
+
+/* Matches for of_clk_init */
+static const __initconst struct of_device_id clk_match[] = {
+ {.compatible = "fixed-clock", .data = of_fixed_clk_setup,},
+ {.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,},
+ {}
+};
+
+/* Matches for factors clocks */
+static const __initconst struct of_device_id clk_factors_match[] = {
+ {.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,},
+ {.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,},
+ {}
+};
+
+/* Matches for divider clocks */
+static const __initconst struct of_device_id clk_div_match[] = {
+ {.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,},
+ {.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,},
+ {.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,},
+ {}
+};
+
+/* Matches for mux clocks */
+static const __initconst struct of_device_id clk_mux_match[] = {
+ {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,},
+ {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,},
+ {}
+};
+
+/* Matches for gate clocks */
+static const __initconst struct of_device_id clk_gates_match[] = {
+ {.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,},
+ {.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,},
+ {.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,},
+ {.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,},
+ {}
+};
+
+static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match,
+ void *function)
+{
+ struct device_node *np;
+ const struct div_data *data;
+ const struct of_device_id *match;
+ void (*setup_function)(struct device_node *, const void *) = function;
+
+ for_each_matching_node(np, clk_match) {
+ match = of_match_node(clk_match, np);
+ data = match->data;
+ setup_function(np, data);
+ }
+}
+
+void __init sunxi_init_clocks(void)
+{
+ /* Register all the simple sunxi clocks on DT */
+ of_clk_init(clk_match);
+
+ /* Register factor clocks */
+ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
+
+ /* Register divider clocks */
+ of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
+
+ /* Register mux clocks */
+ of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
+
+ /* Register gate clocks */
+ of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
+}
}
static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
- "pll_p_cclk", "pll_p_out4_cclk",
- "pll_p_out3_cclk", "clk_d", "pll_x" };
+ "pll_p", "pll_p_out4",
+ "pll_p_out3", "clk_d", "pll_x" };
static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
"pll_p_out3", "pll_p_out2", "clk_d",
"clk_32k", "pll_m_out1" };
{
struct clk *clk;
- /*
- * DIV_U71 dividers for CCLK, these dividers are used only
- * if parent clock is fixed rate.
- */
-
- /*
- * Clock input to cclk divided from pll_p using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_cclk", "pll_p",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_cclk", NULL);
-
- /*
- * Clock input to cclk divided from pll_p_out3 using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_out3_cclk", "pll_p_out3",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_out3_cclk", NULL);
-
- /*
- * Clock input to cclk divided from pll_p_out4 using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_out4_cclk", "pll_p_out4",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_out4_cclk", NULL);
-
/* CCLK */
clk = tegra_clk_register_super_mux("cclk", cclk_parents,
ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT,
TEGRA_CLK_DUPLICATE(usbd, "tegra-ehci.0", NULL),
TEGRA_CLK_DUPLICATE(usbd, "tegra-otg", NULL),
TEGRA_CLK_DUPLICATE(cclk, NULL, "cpu"),
- TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* Must be the last entry */
};
TEGRA_CLK_DUPLICATE(cml1, "tegra_sata_cml", NULL),
TEGRA_CLK_DUPLICATE(cml0, "tegra_pcie", "cml"),
TEGRA_CLK_DUPLICATE(pciex, "tegra_pcie", "pciex"),
- TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
TEGRA_CLK_DUPLICATE(vcp, "nvavp", "vcp"),
TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* MUST be the last entry */
};
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset);
-#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \
_div_shift, _div_width, _div_frac_width, \
_div_flags, _clk_num, _enb_refcnt, _regs, \
- _gate_flags) \
+ _gate_flags, _table) \
{ \
.mux = { \
.flags = _mux_flags, \
.shift = _mux_shift, \
- .width = _mux_width, \
+ .mask = _mux_mask, \
+ .table = _table, \
}, \
.divider = { \
.flags = _div_flags, \
const char *dev_id;
};
-#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
- _mux_shift, _mux_width, _mux_flags, _div_shift, \
+#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, _mux_mask, _mux_flags, _div_shift, \
_div_width, _div_frac_width, _div_flags, _regs, \
- _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table) \
{ \
.name = _name, \
.clk_id = _clk_id, \
.parent_names = _parent_names, \
.num_parents = ARRAY_SIZE(_parent_names), \
- .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \
+ .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \
_mux_flags, _div_shift, \
_div_width, _div_frac_width, \
_div_flags, _clk_num, \
_enb_refcnt, _regs, \
- _gate_flags), \
+ _gate_flags, _table), \
.offset = _offset, \
.con_id = _con_id, \
.dev_id = _dev_id, \
}
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, _mux_width, _mux_flags, _div_shift, \
+ _div_width, _div_frac_width, _div_flags, _regs, \
+ _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, BIT(_mux_width) - 1, _mux_flags, \
+ _div_shift, _div_width, _div_frac_width, _div_flags, \
+ _regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\
+ NULL)
+
/**
* struct clk_super_mux - super clock
*
struct clk_prcmu {
struct clk_hw hw;
u8 cg_sel;
+ int is_prepared;
int is_enabled;
+ int opp_requested;
};
/* PRCMU clock operations. */
static int clk_prcmu_prepare(struct clk_hw *hw)
{
+ int ret;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- return prcmu_request_clock(clk->cg_sel, true);
+
+ ret = prcmu_request_clock(clk->cg_sel, true);
+ if (!ret)
+ clk->is_prepared = 1;
+
+ return ret;;
}
static void clk_prcmu_unprepare(struct clk_hw *hw)
struct clk_prcmu *clk = to_clk_prcmu(hw);
if (prcmu_request_clock(clk->cg_sel, false))
pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ __clk_get_name(hw->clk));
+ else
+ clk->is_prepared = 0;
+}
+
+static int clk_prcmu_is_prepared(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return clk->is_prepared;
}
static int clk_prcmu_enable(struct clk_hw *hw)
return prcmu_set_clock_rate(clk->cg_sel, rate);
}
-static int request_ape_opp100(bool enable)
-{
- static int reqs;
- int err = 0;
-
- if (enable) {
- if (!reqs)
- err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
- "clock", 100);
- if (!err)
- reqs++;
- } else {
- reqs--;
- if (!reqs)
- prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
- "clock");
- }
- return err;
-}
-
static int clk_prcmu_opp_prepare(struct clk_hw *hw)
{
int err;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- err = request_ape_opp100(true);
- if (err) {
- pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
- __func__, hw->init->name);
- return err;
+ if (!clk->opp_requested) {
+ err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk),
+ 100);
+ if (err) {
+ pr_err("clk_prcmu: %s fail req APE OPP for %s.\n",
+ __func__, __clk_get_name(hw->clk));
+ return err;
+ }
+ clk->opp_requested = 1;
}
err = prcmu_request_clock(clk->cg_sel, true);
- if (err)
- request_ape_opp100(false);
+ if (err) {
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk));
+ clk->opp_requested = 0;
+ return err;
+ }
- return err;
+ clk->is_prepared = 1;
+ return 0;
}
static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
{
struct clk_prcmu *clk = to_clk_prcmu(hw);
- if (prcmu_request_clock(clk->cg_sel, false))
- goto out_error;
- if (request_ape_opp100(false))
- goto out_error;
- return;
-
-out_error:
- pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ if (prcmu_request_clock(clk->cg_sel, false)) {
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (clk->opp_requested) {
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk));
+ clk->opp_requested = 0;
+ }
+
+ clk->is_prepared = 0;
}
static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
int err;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- err = prcmu_request_ape_opp_100_voltage(true);
- if (err) {
- pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n",
- __func__, hw->init->name);
- return err;
+ if (!clk->opp_requested) {
+ err = prcmu_request_ape_opp_100_voltage(true);
+ if (err) {
+ pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n",
+ __func__, __clk_get_name(hw->clk));
+ return err;
+ }
+ clk->opp_requested = 1;
}
err = prcmu_request_clock(clk->cg_sel, true);
- if (err)
+ if (err) {
prcmu_request_ape_opp_100_voltage(false);
+ clk->opp_requested = 0;
+ return err;
+ }
- return err;
+ clk->is_prepared = 1;
+ return 0;
}
static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
{
struct clk_prcmu *clk = to_clk_prcmu(hw);
- if (prcmu_request_clock(clk->cg_sel, false))
- goto out_error;
- if (prcmu_request_ape_opp_100_voltage(false))
- goto out_error;
- return;
-
-out_error:
- pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ if (prcmu_request_clock(clk->cg_sel, false)) {
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (clk->opp_requested) {
+ prcmu_request_ape_opp_100_voltage(false);
+ clk->opp_requested = 0;
+ }
+
+ clk->is_prepared = 0;
}
static struct clk_ops clk_prcmu_scalable_ops = {
.prepare = clk_prcmu_prepare,
.unprepare = clk_prcmu_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_gate_ops = {
.prepare = clk_prcmu_prepare,
.unprepare = clk_prcmu_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_opp_gate_ops = {
.prepare = clk_prcmu_opp_prepare,
.unprepare = clk_prcmu_opp_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
.prepare = clk_prcmu_opp_volt_prepare,
.unprepare = clk_prcmu_opp_volt_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
}
clk->cg_sel = cg_sel;
+ clk->is_prepared = 1;
clk->is_enabled = 1;
+ clk->opp_requested = 0;
/* "rate" can be used for changing the initial frequency */
if (rate)
prcmu_set_clock_rate(cg_sel, rate);
config ARMADA_370_XP_TIMER
bool
-config SUNXI_TIMER
+config SUN4I_TIMER
bool
config VT8500_TIMER
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
-obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
+obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
+obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
}
}
-static struct of_device_id bcm2835_time_match[] __initconst = {
- { .compatible = "brcm,bcm2835-system-timer" },
- {}
-};
-
-static void __init bcm2835_timer_init(void)
+static void __init bcm2835_timer_init(struct device_node *node)
{
- struct device_node *node;
void __iomem *base;
u32 freq;
int irq;
struct bcm2835_timer *timer;
- node = of_find_matching_node(NULL, bcm2835_time_match);
- if (!node)
- panic("No bcm2835 timer node");
-
base = of_iomap(node, 0);
if (!base)
panic("Can't remap registers");
#include <linux/init.h>
#include <linux/of.h>
+#include <linux/clocksource.h>
extern struct of_device_id __clksrc_of_table[];
{
struct device_node *np;
const struct of_device_id *match;
- void (*init_func)(void);
+ clocksource_of_init_fn init_func;
for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
init_func = match->data;
- init_func();
+ init_func(np);
}
}
--- /dev/null
+/*
+ * Copyright (C) 2000-2001 Deep Blue Solutions
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+/*
+ * There are 2 versions of the timrot on Freescale MXS-based SoCs.
+ * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
+ * extends the counter to 32 bits.
+ *
+ * The implementation uses two timers, one for clock_event and
+ * another for clocksource. MX28 uses timrot 0 and 1, while MX23
+ * uses 0 and 2.
+ */
+
+#define MX23_TIMROT_VERSION_OFFSET 0x0a0
+#define MX28_TIMROT_VERSION_OFFSET 0x120
+#define BP_TIMROT_MAJOR_VERSION 24
+#define BV_TIMROT_VERSION_1 0x01
+#define BV_TIMROT_VERSION_2 0x02
+#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1)
+
+/*
+ * There are 4 registers for each timrotv2 instance, and 2 registers
+ * for each timrotv1. So address step 0x40 in macros below strides
+ * one instance of timrotv2 while two instances of timrotv1.
+ *
+ * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
+ * on MX28 while timrot2 on MX23.
+ */
+/* common between v1 and v2 */
+#define HW_TIMROT_ROTCTRL 0x00
+#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40)
+/* v1 only */
+#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40)
+/* v2 only */
+#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40)
+#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40)
+
+#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6)
+#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7)
+#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
+#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15)
+#define BP_TIMROT_TIMCTRLn_SELECT 0
+#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
+#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
+#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf
+
+static struct clock_event_device mxs_clockevent_device;
+static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *mxs_timrot_base;
+static u32 timrot_major_version;
+
+static inline void timrot_irq_disable(void)
+{
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static inline void timrot_irq_enable(void)
+{
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
+}
+
+static void timrot_irq_acknowledge(void)
+{
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static cycle_t timrotv1_get_cycles(struct clocksource *cs)
+{
+ return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
+ & 0xffff0000) >> 16);
+}
+
+static int timrotv1_set_next_event(unsigned long evt,
+ struct clock_event_device *dev)
+{
+ /* timrot decrements the count */
+ __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
+
+ return 0;
+}
+
+static int timrotv2_set_next_event(unsigned long evt,
+ struct clock_event_device *dev)
+{
+ /* timrot decrements the count */
+ __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
+
+ return 0;
+}
+
+static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ timrot_irq_acknowledge();
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mxs_timer_irq = {
+ .name = "MXS Timer Tick",
+ .dev_id = &mxs_clockevent_device,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = mxs_timer_interrupt,
+};
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] const = {
+ [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+ [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
+ [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+ [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /* DEBUG */
+
+static void mxs_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ /* Disable interrupt in timer module */
+ timrot_irq_disable();
+
+ if (mode != mxs_clockevent_mode) {
+ /* Set event time into the furthest future */
+ if (timrot_is_v1())
+ __raw_writel(0xffff,
+ mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+ else
+ __raw_writel(0xffffffff,
+ mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+ /* Clear pending interrupt */
+ timrot_irq_acknowledge();
+ }
+
+#ifdef DEBUG
+ pr_info("%s: changing mode from %s to %s\n", __func__,
+ clock_event_mode_label[mxs_clockevent_mode],
+ clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+ /* Remember timer mode */
+ mxs_clockevent_mode = mode;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ pr_err("%s: Periodic mode is not implemented\n", __func__);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ timrot_irq_enable();
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ /* Left event sources disabled, no more interrupts appear */
+ break;
+ }
+}
+
+static struct clock_event_device mxs_clockevent_device = {
+ .name = "mxs_timrot",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = mxs_set_mode,
+ .set_next_event = timrotv2_set_next_event,
+ .rating = 200,
+};
+
+static int __init mxs_clockevent_init(struct clk *timer_clk)
+{
+ if (timrot_is_v1())
+ mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
+ mxs_clockevent_device.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&mxs_clockevent_device,
+ clk_get_rate(timer_clk),
+ timrot_is_v1() ? 0xf : 0x2,
+ timrot_is_v1() ? 0xfffe : 0xfffffffe);
+
+ return 0;
+}
+
+static struct clocksource clocksource_mxs = {
+ .name = "mxs_timer",
+ .rating = 200,
+ .read = timrotv1_get_cycles,
+ .mask = CLOCKSOURCE_MASK(16),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u32 notrace mxs_read_sched_clock_v2(void)
+{
+ return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
+}
+
+static int __init mxs_clocksource_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ if (timrot_is_v1())
+ clocksource_register_hz(&clocksource_mxs, c);
+ else {
+ clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
+ "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
+ setup_sched_clock(mxs_read_sched_clock_v2, 32, c);
+ }
+
+ return 0;
+}
+
+static void __init mxs_timer_init(struct device_node *np)
+{
+ struct clk *timer_clk;
+ int irq;
+
+ mxs_timrot_base = of_iomap(np, 0);
+ WARN_ON(!mxs_timrot_base);
+
+ timer_clk = of_clk_get(np, 0);
+ if (IS_ERR(timer_clk)) {
+ pr_err("%s: failed to get clk\n", __func__);
+ return;
+ }
+
+ clk_prepare_enable(timer_clk);
+
+ /*
+ * Initialize timers to a known state
+ */
+ stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+
+ /* get timrot version */
+ timrot_major_version = __raw_readl(mxs_timrot_base +
+ (of_device_is_compatible(np, "fsl,imx23-timrot") ?
+ MX23_TIMROT_VERSION_OFFSET :
+ MX28_TIMROT_VERSION_OFFSET));
+ timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
+
+ /* one for clock_event */
+ __raw_writel((timrot_is_v1() ?
+ BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+ BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+ BM_TIMROT_TIMCTRLn_UPDATE |
+ BM_TIMROT_TIMCTRLn_IRQ_EN,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+
+ /* another for clocksource */
+ __raw_writel((timrot_is_v1() ?
+ BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+ BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+ BM_TIMROT_TIMCTRLn_RELOAD,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
+
+ /* set clocksource timer fixed count to the maximum */
+ if (timrot_is_v1())
+ __raw_writel(0xffff,
+ mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+ else
+ __raw_writel(0xffffffff,
+ mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+ /* init and register the timer to the framework */
+ mxs_clocksource_init(timer_clk);
+ mxs_clockevent_init(timer_clk);
+
+ /* Make irqs happen */
+ irq = irq_of_parse_and_map(np, 0);
+ setup_irq(irq, &mxs_timer_irq);
+}
+CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
--- /dev/null
+/*
+ * Allwinner A1X SoCs timer handling.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Benn Huang <benn@allwinnertech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_IRQ_EN_REG 0x00
+#define TIMER_IRQ_EN(val) (1 << val)
+#define TIMER_IRQ_ST_REG 0x04
+#define TIMER_CTL_REG(val) (0x10 * val + 0x10)
+#define TIMER_CTL_ENABLE (1 << 0)
+#define TIMER_CTL_AUTORELOAD (1 << 1)
+#define TIMER_CTL_ONESHOT (1 << 7)
+#define TIMER_INTVAL_REG(val) (0x10 * val + 0x14)
+#define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18)
+
+#define TIMER_SCAL 16
+
+static void __iomem *timer_base;
+
+static void sun4i_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ u32 u = readl(timer_base + TIMER_CTL_REG(0));
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ u &= ~(TIMER_CTL_ONESHOT);
+ writel(u | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(0));
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel(u | TIMER_CTL_ONESHOT, timer_base + TIMER_CTL_REG(0));
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ writel(u & ~(TIMER_CTL_ENABLE), timer_base + TIMER_CTL_REG(0));
+ break;
+ }
+}
+
+static int sun4i_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ u32 u = readl(timer_base + TIMER_CTL_REG(0));
+ writel(evt, timer_base + TIMER_CNTVAL_REG(0));
+ writel(u | TIMER_CTL_ENABLE | TIMER_CTL_AUTORELOAD,
+ timer_base + TIMER_CTL_REG(0));
+
+ return 0;
+}
+
+static struct clock_event_device sun4i_clockevent = {
+ .name = "sun4i_tick",
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = sun4i_clkevt_mode,
+ .set_next_event = sun4i_clkevt_next_event,
+};
+
+
+static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+ writel(0x1, timer_base + TIMER_IRQ_ST_REG);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction sun4i_timer_irq = {
+ .name = "sun4i_timer0",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = sun4i_timer_interrupt,
+ .dev_id = &sun4i_clockevent,
+};
+
+static void __init sun4i_timer_init(struct device_node *node)
+{
+ unsigned long rate = 0;
+ struct clk *clk;
+ int ret, irq;
+ u32 val;
+
+ timer_base = of_iomap(node, 0);
+ if (!timer_base)
+ panic("Can't map registers");
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("Can't parse IRQ");
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk))
+ panic("Can't get timer clock");
+
+ rate = clk_get_rate(clk);
+
+ writel(rate / (TIMER_SCAL * HZ),
+ timer_base + TIMER_INTVAL_REG(0));
+
+ /* set clock source to HOSC, 16 pre-division */
+ val = readl(timer_base + TIMER_CTL_REG(0));
+ val &= ~(0x07 << 4);
+ val &= ~(0x03 << 2);
+ val |= (4 << 4) | (1 << 2);
+ writel(val, timer_base + TIMER_CTL_REG(0));
+
+ /* set mode to auto reload */
+ val = readl(timer_base + TIMER_CTL_REG(0));
+ writel(val | TIMER_CTL_AUTORELOAD, timer_base + TIMER_CTL_REG(0));
+
+ ret = setup_irq(irq, &sun4i_timer_irq);
+ if (ret)
+ pr_warn("failed to setup irq %d\n", irq);
+
+ /* Enable timer0 interrupt */
+ val = readl(timer_base + TIMER_IRQ_EN_REG);
+ writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
+
+ sun4i_clockevent.cpumask = cpumask_of(0);
+
+ clockevents_config_and_register(&sun4i_clockevent, rate / TIMER_SCAL,
+ 0x1, 0xff);
+}
+CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer",
+ sun4i_timer_init);
+++ /dev/null
-/*
- * Allwinner A1X SoCs timer handling.
- *
- * Copyright (C) 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Benn Huang <benn@allwinnertech.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqreturn.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sunxi_timer.h>
-#include <linux/clk-provider.h>
-
-#define TIMER_CTL_REG 0x00
-#define TIMER_CTL_ENABLE (1 << 0)
-#define TIMER_IRQ_ST_REG 0x04
-#define TIMER0_CTL_REG 0x10
-#define TIMER0_CTL_ENABLE (1 << 0)
-#define TIMER0_CTL_AUTORELOAD (1 << 1)
-#define TIMER0_CTL_ONESHOT (1 << 7)
-#define TIMER0_INTVAL_REG 0x14
-#define TIMER0_CNTVAL_REG 0x18
-
-#define TIMER_SCAL 16
-
-static void __iomem *timer_base;
-
-static void sunxi_clkevt_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- u32 u = readl(timer_base + TIMER0_CTL_REG);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- u &= ~(TIMER0_CTL_ONESHOT);
- writel(u | TIMER0_CTL_ENABLE, timer_base + TIMER0_CTL_REG);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- writel(u | TIMER0_CTL_ONESHOT, timer_base + TIMER0_CTL_REG);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- default:
- writel(u & ~(TIMER0_CTL_ENABLE), timer_base + TIMER0_CTL_REG);
- break;
- }
-}
-
-static int sunxi_clkevt_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- u32 u = readl(timer_base + TIMER0_CTL_REG);
- writel(evt, timer_base + TIMER0_CNTVAL_REG);
- writel(u | TIMER0_CTL_ENABLE | TIMER0_CTL_AUTORELOAD,
- timer_base + TIMER0_CTL_REG);
-
- return 0;
-}
-
-static struct clock_event_device sunxi_clockevent = {
- .name = "sunxi_tick",
- .rating = 300,
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = sunxi_clkevt_mode,
- .set_next_event = sunxi_clkevt_next_event,
-};
-
-
-static irqreturn_t sunxi_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = (struct clock_event_device *)dev_id;
-
- writel(0x1, timer_base + TIMER_IRQ_ST_REG);
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction sunxi_timer_irq = {
- .name = "sunxi_timer0",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = sunxi_timer_interrupt,
- .dev_id = &sunxi_clockevent,
-};
-
-static struct of_device_id sunxi_timer_dt_ids[] = {
- { .compatible = "allwinner,sunxi-timer" },
- { }
-};
-
-void __init sunxi_timer_init(void)
-{
- struct device_node *node;
- unsigned long rate = 0;
- struct clk *clk;
- int ret, irq;
- u32 val;
-
- node = of_find_matching_node(NULL, sunxi_timer_dt_ids);
- if (!node)
- panic("No sunxi timer node");
-
- timer_base = of_iomap(node, 0);
- if (!timer_base)
- panic("Can't map registers");
-
- irq = irq_of_parse_and_map(node, 0);
- if (irq <= 0)
- panic("Can't parse IRQ");
-
- of_clk_init(NULL);
-
- clk = of_clk_get(node, 0);
- if (IS_ERR(clk))
- panic("Can't get timer clock");
-
- rate = clk_get_rate(clk);
-
- writel(rate / (TIMER_SCAL * HZ),
- timer_base + TIMER0_INTVAL_REG);
-
- /* set clock source to HOSC, 16 pre-division */
- val = readl(timer_base + TIMER0_CTL_REG);
- val &= ~(0x07 << 4);
- val &= ~(0x03 << 2);
- val |= (4 << 4) | (1 << 2);
- writel(val, timer_base + TIMER0_CTL_REG);
-
- /* set mode to auto reload */
- val = readl(timer_base + TIMER0_CTL_REG);
- writel(val | TIMER0_CTL_AUTORELOAD, timer_base + TIMER0_CTL_REG);
-
- ret = setup_irq(irq, &sunxi_timer_irq);
- if (ret)
- pr_warn("failed to setup irq %d\n", irq);
-
- /* Enable timer0 interrupt */
- val = readl(timer_base + TIMER_CTL_REG);
- writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG);
-
- sunxi_clockevent.cpumask = cpumask_of(0);
-
- clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL,
- 0x1, 0xff);
-}
.dev_id = &tegra_clockevent,
};
-static const struct of_device_id timer_match[] __initconst = {
- { .compatible = "nvidia,tegra20-timer" },
- {}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
- { .compatible = "nvidia,tegra20-rtc" },
- {}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
{
- struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
- np = of_find_matching_node(NULL, timer_match);
- if (!np) {
- pr_err("Failed to find timer DT node\n");
- BUG();
- }
-
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
pr_err("Can't map timer registers\n");
BUG();
}
- clk = clk_get_sys("timer", NULL);
+ clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
rate = 12000000;
of_node_put(np);
- np = of_find_matching_node(NULL, rtc_match);
- if (!np) {
- pr_err("Failed to find RTC DT node\n");
- BUG();
- }
-
- rtc_base = of_iomap(np, 0);
- if (!rtc_base) {
- pr_err("Can't map RTC registers");
- BUG();
- }
-
- /*
- * rtc registers are used by read_persistent_clock, keep the rtc clock
- * enabled
- */
- clk = clk_get_sys("rtc-tegra", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get rtc-tegra clock\n");
- else
- clk_prepare_enable(clk);
-
- of_node_put(np);
-
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
tegra_clockevent.irq = tegra_timer_irq.irq;
clockevents_config_and_register(&tegra_clockevent, 1000000,
0x1, 0x1fffffff);
-#ifdef CONFIG_HAVE_ARM_TWD
- twd_local_timer_of_register();
-#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+ struct clk *clk;
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
+ /*
+ * rtc registers are used by read_persistent_clock, keep the rtc clock
+ * enabled
+ */
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk))
+ pr_warn("Unable to get rtc-tegra clock\n");
+ else
+ clk_prepare_enable(clk);
+
+ of_node_put(np);
+
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
#ifdef CONFIG_PM
static u32 usec_config;
.dev_id = &clockevent,
};
-static struct of_device_id vt8500_timer_ids[] = {
- { .compatible = "via,vt8500-timer" },
- { }
-};
-
-static void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(struct device_node *np)
{
- struct device_node *np;
int timer_irq;
- np = of_find_matching_node(NULL, vt8500_timer_ids);
- if (!np) {
- pr_err("%s: Timer description missing from Device Tree\n",
- __func__);
- return;
- }
regbase = of_iomap(np, 0);
if (!regbase) {
pr_err("%s: Missing iobase description in Device Tree\n",
4, 0xf0000000);
}
-CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init);
policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
cpumask_copy(policy->cpus, perf->shared_cpu_map);
}
- cpumask_copy(policy->related_cpus, perf->shared_cpu_map);
#ifdef CONFIG_SMP
dmi_check_system(sw_any_bug_dmi_table);
if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) {
cpumask_clear(policy->cpus);
cpumask_set_cpu(cpu, policy->cpus);
- cpumask_copy(policy->related_cpus, cpu_sibling_mask(cpu));
policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
pr_info_once(PFX "overriding BIOS provided _PSD data\n");
}
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- if (!cpufreq_frequency_get_table(cpu))
+ if (!policy)
return;
- if (policy && !policy_is_shared(policy)) {
+ if (!cpufreq_frequency_get_table(cpu))
+ goto put_ref;
+
+ if (!policy_is_shared(policy)) {
pr_debug("%s: Free sysfs stat\n", __func__);
sysfs_remove_group(&policy->kobj, &stats_attr_group);
}
- if (policy)
- cpufreq_cpu_put(policy);
+
+put_ref:
+ cpufreq_cpu_put(policy);
}
static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
static int intel_pstate_min_pstate(void)
{
u64 value;
- rdmsrl(0xCE, value);
+ rdmsrl(MSR_PLATFORM_INFO, value);
return (value >> 40) & 0xFF;
}
static int intel_pstate_max_pstate(void)
{
u64 value;
- rdmsrl(0xCE, value);
+ rdmsrl(MSR_PLATFORM_INFO, value);
return (value >> 8) & 0xFF;
}
{
u64 value;
int nont, ret;
- rdmsrl(0x1AD, value);
+ rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value);
nont = intel_pstate_max_pstate();
ret = ((value) & 255);
if (ret <= nont)
sample->idletime_us * 100,
sample->duration_us);
core_pct = div64_u64(sample->aperf * 100, sample->mperf);
- sample->freq = cpu->pstate.turbo_pstate * core_pct * 1000;
+ sample->freq = cpu->pstate.max_pstate * core_pct * 1000;
sample->core_pct_busy = div_s64((sample->pstate_pct_busy * core_pct),
100);
static int __initdata no_load;
+static int intel_pstate_msrs_not_valid(void)
+{
+ /* Check that all the msr's we are using are valid. */
+ u64 aperf, mperf, tmp;
+
+ rdmsrl(MSR_IA32_APERF, aperf);
+ rdmsrl(MSR_IA32_MPERF, mperf);
+
+ if (!intel_pstate_min_pstate() ||
+ !intel_pstate_max_pstate() ||
+ !intel_pstate_turbo_pstate())
+ return -ENODEV;
+
+ rdmsrl(MSR_IA32_APERF, tmp);
+ if (!(tmp - aperf))
+ return -ENODEV;
+
+ rdmsrl(MSR_IA32_MPERF, tmp);
+ if (!(tmp - mperf))
+ return -ENODEV;
+
+ return 0;
+}
static int __init intel_pstate_init(void)
{
int cpu, rc = 0;
if (!id)
return -ENODEV;
+ if (intel_pstate_msrs_not_valid())
+ return -ENODEV;
+
pr_info("Intel P-state driver initializing.\n");
all_cpu_data = vmalloc(sizeof(void *) * num_possible_cpus());
};
static struct caam_alg_template driver_algs[] = {
- /*
- * single-pass ipsec_esp descriptor
- * authencesn(*,*) is also registered, although not present
- * explicitly here.
- */
+ /* single-pass ipsec_esp descriptor */
{
.name = "authenc(hmac(md5),cbc(aes))",
.driver_name = "authenc-hmac-md5-cbc-aes-caam",
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
/* TODO: check if h/w supports alg */
struct caam_crypto_alg *t_alg;
- bool done = false;
-authencesn:
t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
dev_warn(ctrldev, "%s alg registration failed\n",
t_alg->crypto_alg.cra_driver_name);
kfree(t_alg);
- } else {
+ } else
list_add_tail(&t_alg->entry, &priv->alg_list);
- if (driver_algs[i].type == CRYPTO_ALG_TYPE_AEAD &&
- !memcmp(driver_algs[i].name, "authenc", 7) &&
- !done) {
- char *name;
-
- name = driver_algs[i].name;
- memmove(name + 10, name + 7, strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- name = driver_algs[i].driver_name;
- memmove(name + 10, name + 7, strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- done = true;
- goto authencesn;
- }
- }
}
if (!list_empty(&priv->alg_list))
dev_info(ctrldev, "%s algorithms registered in /proc/crypto\n",
#include <linux/types.h>
#include <linux/debugfs.h>
#include <linux/circ_buf.h>
-#include <linux/string.h>
#include <net/xfrm.h>
#include <crypto/algapi.h>
#include <linux/spinlock.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
-#include <linux/string.h>
#include <crypto/algapi.h>
#include <crypto/aes.h>
};
static struct talitos_alg_template driver_algs[] = {
- /*
- * AEAD algorithms. These use a single-pass ipsec_esp descriptor.
- * authencesn(*,*) is also registered, although not present
- * explicitly here.
- */
+ /* AEAD algorithms. These use a single-pass ipsec_esp descriptor */
{ .type = CRYPTO_ALG_TYPE_AEAD,
.alg.crypto = {
.cra_name = "authenc(hmac(sha1),cbc(aes))",
if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
struct talitos_crypto_alg *t_alg;
char *name = NULL;
- bool authenc = false;
-authencesn:
t_alg = talitos_alg_alloc(dev, &driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
err = crypto_register_alg(
&t_alg->algt.alg.crypto);
name = t_alg->algt.alg.crypto.cra_driver_name;
- authenc = authenc ? !authenc :
- !(bool)memcmp(name, "authenc", 7);
break;
case CRYPTO_ALG_TYPE_AHASH:
err = crypto_register_ahash(
dev_err(dev, "%s alg registration failed\n",
name);
kfree(t_alg);
- } else {
+ } else
list_add_tail(&t_alg->entry, &priv->alg_list);
- if (authenc) {
- struct crypto_alg *alg =
- &driver_algs[i].alg.crypto;
-
- name = alg->cra_name;
- memmove(name + 10, name + 7,
- strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- name = alg->cra_driver_name;
- memmove(name + 10, name + 7,
- strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- goto authencesn;
- }
- }
}
}
if (!list_empty(&priv->alg_list))
*maxburst = 0;
}
+static inline void convert_slave_id(struct dw_dma_chan *dwc)
+{
+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+
+ dwc->dma_sconfig.slave_id -= dw->request_line_base;
+}
+
static int
set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
{
convert_burst(&dwc->dma_sconfig.src_maxburst);
convert_burst(&dwc->dma_sconfig.dst_maxburst);
+ convert_slave_id(dwc);
return 0;
}
if (dma_spec->args_count != 3)
return NULL;
- fargs.req = be32_to_cpup(dma_spec->args+0);
- fargs.src = be32_to_cpup(dma_spec->args+1);
- fargs.dst = be32_to_cpup(dma_spec->args+2);
+ fargs.req = dma_spec->args[0];
+ fargs.src = dma_spec->args[1];
+ fargs.dst = dma_spec->args[2];
if (WARN_ON(fargs.req >= DW_DMA_MAX_NR_REQUESTS ||
fargs.src >= dw->nr_masters ||
static int dw_probe(struct platform_device *pdev)
{
+ const struct platform_device_id *match;
struct dw_dma_platform_data *pdata;
struct resource *io;
struct dw_dma *dw;
memcpy(dw->data_width, pdata->data_width, 4);
}
+ /* Get the base request line if set */
+ match = platform_get_device_id(pdev);
+ if (match)
+ dw->request_line_base = (unsigned int)match->driver_data;
+
/* Calculate all channel mask before DMA setup */
dw->all_chan_mask = (1 << nr_channels) - 1;
#endif
static const struct platform_device_id dw_dma_ids[] = {
- { "INTL9C60", 0 },
+ /* Name, Request Line Base */
+ { "INTL9C60", (kernel_ulong_t)16 },
{ }
};
/* hardware configuration */
unsigned char nr_masters;
unsigned char data_width[4];
+ unsigned int request_line_base;
struct dw_dma_chan chan[0];
};
edac_dbg(1, "MC node: %d, csrow: %d\n",
pvt->mc_node_id, i);
- if (row_dct0)
+ if (row_dct0) {
nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
+ csrow->channels[0]->dimm->nr_pages = nr_pages;
+ }
/* K8 has only one DCT */
- if (boot_cpu_data.x86 != 0xf && row_dct1)
- nr_pages += amd64_csrow_nr_pages(pvt, 1, i);
+ if (boot_cpu_data.x86 != 0xf && row_dct1) {
+ int row_dct1_pages = amd64_csrow_nr_pages(pvt, 1, i);
+
+ csrow->channels[1]->dimm->nr_pages = row_dct1_pages;
+ nr_pages += row_dct1_pages;
+ }
mtype = amd64_determine_memory_type(pvt, i);
dimm = csrow->channels[j]->dimm;
dimm->mtype = mtype;
dimm->edac_mode = edac_mode;
- dimm->nr_pages = nr_pages;
}
- csrow->nr_pages = nr_pages;
}
return empty;
mci->pvt_info = pvt;
mci->pdev = &pvt->F2->dev;
- mci->csbased = 1;
setup_mci_misc_attrs(mci, fam_type);
edac_dimm_info_location(dimm, location, sizeof(location));
edac_dbg(4, "%s%i: %smapped as virtual row %d, chan %d\n",
- dimm->mci->mem_is_per_rank ? "rank" : "dimm",
+ dimm->mci->csbased ? "rank" : "dimm",
number, location, dimm->csrow, dimm->cschannel);
edac_dbg(4, " dimm = %p\n", dimm);
edac_dbg(4, " dimm->label = '%s'\n", dimm->label);
memcpy(mci->layers, layers, sizeof(*layer) * n_layers);
mci->nr_csrows = tot_csrows;
mci->num_cschannel = tot_channels;
- mci->mem_is_per_rank = per_rank;
+ mci->csbased = per_rank;
/*
* Alocate and fill the csrow/channels structs
* incrementing the compat API counters
*/
edac_dbg(4, "%s csrows map: (%d,%d)\n",
- mci->mem_is_per_rank ? "rank" : "dimm",
+ mci->csbased ? "rank" : "dimm",
dimm->csrow, dimm->cschannel);
if (row == -1)
row = dimm->csrow;
* and the per-dimm/per-rank one
*/
#define DEVICE_ATTR_LEGACY(_name, _mode, _show, _store) \
- struct device_attribute dev_attr_legacy_##_name = __ATTR(_name, _mode, _show, _store)
+ static struct device_attribute dev_attr_legacy_##_name = __ATTR(_name, _mode, _show, _store)
struct dev_ch_attribute {
struct device_attribute attr;
int i;
u32 nr_pages = 0;
- if (csrow->mci->csbased)
- return sprintf(data, "%u\n", PAGES_TO_MiB(csrow->nr_pages));
-
for (i = 0; i < csrow->nr_channels; i++)
nr_pages += csrow->channels[i]->dimm->nr_pages;
return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages));
device_initialize(&dimm->dev);
dimm->dev.parent = &mci->dev;
- if (mci->mem_is_per_rank)
+ if (mci->csbased)
dev_set_name(&dimm->dev, "rank%d", index);
else
dev_set_name(&dimm->dev, "dimm%d", index);
for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) {
struct csrow_info *csrow = mci->csrows[csrow_idx];
- if (csrow->mci->csbased) {
- total_pages += csrow->nr_pages;
- } else {
- for (j = 0; j < csrow->nr_channels; j++) {
- struct dimm_info *dimm = csrow->channels[j]->dimm;
+ for (j = 0; j < csrow->nr_channels; j++) {
+ struct dimm_info *dimm = csrow->channels[j]->dimm;
- total_pages += dimm->nr_pages;
- }
+ total_pages += dimm->nr_pages;
}
}
#define DEV_NAME "max77693-muic"
#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */
+/*
+ * Default value of MAX77693 register to bring up MUIC device.
+ * If user don't set some initial value for MUIC device through platform data,
+ * extcon-max77693 driver use 'default_init_data' to bring up base operation
+ * of MAX77693 MUIC device.
+ */
+struct max77693_reg_data default_init_data[] = {
+ {
+ /* STATUS2 - [3]ChgDetRun */
+ .addr = MAX77693_MUIC_REG_STATUS2,
+ .data = STATUS2_CHGDETRUN_MASK,
+ }, {
+ /* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
+ .addr = MAX77693_MUIC_REG_INTMASK1,
+ .data = INTMASK1_ADC1K_MASK
+ | INTMASK1_ADC_MASK,
+ }, {
+ /* INTMASK2 - Unmask [0]ChgTypM */
+ .addr = MAX77693_MUIC_REG_INTMASK2,
+ .data = INTMASK2_CHGTYP_MASK,
+ }, {
+ /* INTMASK3 - Mask all of interrupts */
+ .addr = MAX77693_MUIC_REG_INTMASK3,
+ .data = 0x0,
+ }, {
+ /* CDETCTRL2 */
+ .addr = MAX77693_MUIC_REG_CDETCTRL2,
+ .data = CDETCTRL2_VIDRMEN_MASK
+ | CDETCTRL2_DXOVPEN_MASK,
+ },
+};
+
enum max77693_muic_adc_debounce_time {
ADC_DEBOUNCE_TIME_5MS = 0,
ADC_DEBOUNCE_TIME_10MS,
{
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
- struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
struct max77693_muic_info *info;
+ struct max77693_reg_data *init_data;
+ int num_init_data;
int delay_jiffies;
int ret;
int i;
goto err_irq;
}
- /* Initialize MUIC register by using platform data */
- for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
- enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
+
+ /* Initialize MUIC register by using platform data or default data */
+ if (pdata->muic_data) {
+ init_data = pdata->muic_data->init_data;
+ num_init_data = pdata->muic_data->num_init_data;
+ } else {
+ init_data = default_init_data;
+ num_init_data = ARRAY_SIZE(default_init_data);
+ }
+
+ for (i = 0 ; i < num_init_data ; i++) {
+ enum max77693_irq_source irq_src
+ = MAX77693_IRQ_GROUP_NR;
max77693_write_reg(info->max77693->regmap_muic,
- muic_pdata->init_data[i].addr,
- muic_pdata->init_data[i].data);
+ init_data[i].addr,
+ init_data[i].data);
- switch (muic_pdata->init_data[i].addr) {
+ switch (init_data[i].addr) {
case MAX77693_MUIC_REG_INTMASK1:
irq_src = MUIC_INT1;
break;
if (irq_src < MAX77693_IRQ_GROUP_NR)
info->max77693->irq_masks_cur[irq_src]
- = muic_pdata->init_data[i].data;
+ = init_data[i].data;
}
- /*
- * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
- * h/w path of COMP2/COMN1 on CONTROL1 register.
- */
- if (muic_pdata->path_uart)
- info->path_uart = muic_pdata->path_uart;
- else
- info->path_uart = CONTROL1_SW_UART;
+ if (pdata->muic_data) {
+ struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
- if (muic_pdata->path_usb)
- info->path_usb = muic_pdata->path_usb;
- else
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ if (muic_pdata->path_uart)
+ info->path_uart = muic_pdata->path_uart;
+ else
+ info->path_uart = CONTROL1_SW_UART;
+
+ if (muic_pdata->path_usb)
+ info->path_usb = muic_pdata->path_usb;
+ else
+ info->path_usb = CONTROL1_SW_USB;
+
+ /*
+ * Default delay time for detecting cable state
+ * after certain time.
+ */
+ if (muic_pdata->detcable_delay_ms)
+ delay_jiffies =
+ msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+ else
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ } else {
info->path_usb = CONTROL1_SW_USB;
+ info->path_uart = CONTROL1_SW_UART;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ }
/* Set initial path for UART */
max77693_muic_set_path(info, info->path_uart, true);
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
- if (muic_pdata->detcable_delay_ms)
- delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms);
- else
- delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
schedule_delayed_work(&info->wq_detcable, delay_jiffies);
return ret;
goto err_irq;
}
- /* Initialize registers according to platform data */
if (pdata->muic_pdata) {
- struct max8997_muic_platform_data *mdata = info->muic_pdata;
-
- for (i = 0; i < mdata->num_init_data; i++) {
- max8997_write_reg(info->muic, mdata->init_data[i].addr,
- mdata->init_data[i].data);
+ struct max8997_muic_platform_data *muic_pdata
+ = pdata->muic_pdata;
+
+ /* Initialize registers according to platform data */
+ for (i = 0; i < muic_pdata->num_init_data; i++) {
+ max8997_write_reg(info->muic,
+ muic_pdata->init_data[i].addr,
+ muic_pdata->init_data[i].data);
}
- }
- /*
- * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
- * h/w path of COMP2/COMN1 on CONTROL1 register.
- */
- if (pdata->muic_pdata->path_uart)
- info->path_uart = pdata->muic_pdata->path_uart;
- else
- info->path_uart = CONTROL1_SW_UART;
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ if (muic_pdata->path_uart)
+ info->path_uart = muic_pdata->path_uart;
+ else
+ info->path_uart = CONTROL1_SW_UART;
- if (pdata->muic_pdata->path_usb)
- info->path_usb = pdata->muic_pdata->path_usb;
- else
+ if (muic_pdata->path_usb)
+ info->path_usb = muic_pdata->path_usb;
+ else
+ info->path_usb = CONTROL1_SW_USB;
+
+ /*
+ * Default delay time for detecting cable state
+ * after certain time.
+ */
+ if (muic_pdata->detcable_delay_ms)
+ delay_jiffies =
+ msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+ else
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ } else {
+ info->path_uart = CONTROL1_SW_UART;
info->path_usb = CONTROL1_SW_USB;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ }
/* Set initial path for UART */
max8997_muic_set_path(info, info->path_uart, true);
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq);
- if (pdata->muic_pdata->detcable_delay_ms)
- delay_jiffies = msecs_to_jiffies(pdata->muic_pdata->detcable_delay_ms);
- else
- delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
schedule_delayed_work(&info->wq_detcable, delay_jiffies);
return 0;
Subsequent efibootmgr releases may be found at:
<http://linux.dell.com/efibootmgr>
+config EFI_VARS_PSTORE
+ bool "Register efivars backend for pstore"
+ depends on EFI_VARS && PSTORE
+ default y
+ help
+ Say Y here to enable use efivars as a backend to pstore. This
+ will allow writing console messages, crash dumps, or anything
+ else supported by pstore to EFI variables.
+
+config EFI_VARS_PSTORE_DEFAULT_DISABLE
+ bool "Disable using efivars as a pstore backend by default"
+ depends on EFI_VARS_PSTORE
+ default n
+ help
+ Saying Y here will disable the use of efivars as a storage
+ backend for pstore by default. This setting can be overridden
+ using the efivars module's pstore_disable parameter.
+
config EFI_PCDP
bool "Console device selection via EFI PCDP or HCDP table"
depends on ACPI && EFI && IA64
*/
#define GUID_LEN 36
+static bool efivars_pstore_disable =
+ IS_ENABLED(CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE);
+
+module_param_named(pstore_disable, efivars_pstore_disable, bool, 0644);
+
/*
* The maximum size of VariableName + Data = 1024
* Therefore, it's reasonable to save that much
static void efivar_update_sysfs_entries(struct work_struct *);
static DECLARE_WORK(efivar_work, efivar_update_sysfs_entries);
+static bool efivar_wq_enabled = true;
/* Return the number of unicode characters in data */
static unsigned long
.create = efivarfs_create,
};
-static struct pstore_info efi_pstore_info;
-
-#ifdef CONFIG_PSTORE
+#ifdef CONFIG_EFI_VARS_PSTORE
static int efi_pstore_open(struct pstore_info *psi)
{
spin_unlock_irqrestore(&efivars->lock, flags);
- if (reason == KMSG_DUMP_OOPS)
+ if (reason == KMSG_DUMP_OOPS && efivar_wq_enabled)
schedule_work(&efivar_work);
*id = part;
return 0;
}
-#else
-static int efi_pstore_open(struct pstore_info *psi)
-{
- return 0;
-}
-
-static int efi_pstore_close(struct pstore_info *psi)
-{
- return 0;
-}
-
-static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, int *count,
- struct timespec *timespec,
- char **buf, struct pstore_info *psi)
-{
- return -1;
-}
-
-static int efi_pstore_write(enum pstore_type_id type,
- enum kmsg_dump_reason reason, u64 *id,
- unsigned int part, int count, size_t size,
- struct pstore_info *psi)
-{
- return 0;
-}
-
-static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count,
- struct timespec time, struct pstore_info *psi)
-{
- return 0;
-}
-#endif
static struct pstore_info efi_pstore_info = {
.owner = THIS_MODULE,
.erase = efi_pstore_erase,
};
+static void efivar_pstore_register(struct efivars *efivars)
+{
+ efivars->efi_pstore_info = efi_pstore_info;
+ efivars->efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
+ if (efivars->efi_pstore_info.buf) {
+ efivars->efi_pstore_info.bufsize = 1024;
+ efivars->efi_pstore_info.data = efivars;
+ spin_lock_init(&efivars->efi_pstore_info.buf_lock);
+ pstore_register(&efivars->efi_pstore_info);
+ }
+}
+#else
+static void efivar_pstore_register(struct efivars *efivars)
+{
+ return;
+}
+#endif
+
static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t pos, size_t count)
return found;
}
+/*
+ * Returns the size of variable_name, in bytes, including the
+ * terminating NULL character, or variable_name_size if no NULL
+ * character is found among the first variable_name_size bytes.
+ */
+static unsigned long var_name_strnsize(efi_char16_t *variable_name,
+ unsigned long variable_name_size)
+{
+ unsigned long len;
+ efi_char16_t c;
+
+ /*
+ * The variable name is, by definition, a NULL-terminated
+ * string, so make absolutely sure that variable_name_size is
+ * the value we expect it to be. If not, return the real size.
+ */
+ for (len = 2; len <= variable_name_size; len += sizeof(c)) {
+ c = variable_name[(len / sizeof(c)) - 1];
+ if (!c)
+ break;
+ }
+
+ return min(len, variable_name_size);
+}
+
static void efivar_update_sysfs_entries(struct work_struct *work)
{
struct efivars *efivars = &__efivars;
if (!found) {
kfree(variable_name);
break;
- } else
+ } else {
+ variable_name_size = var_name_strnsize(variable_name,
+ variable_name_size);
efivar_create_sysfs_entry(efivars,
variable_name_size,
variable_name, &vendor);
+ }
}
}
}
EXPORT_SYMBOL_GPL(unregister_efivars);
+/*
+ * Print a warning when duplicate EFI variables are encountered and
+ * disable the sysfs workqueue since the firmware is buggy.
+ */
+static void dup_variable_bug(efi_char16_t *s16, efi_guid_t *vendor_guid,
+ unsigned long len16)
+{
+ size_t i, len8 = len16 / sizeof(efi_char16_t);
+ char *s8;
+
+ /*
+ * Disable the workqueue since the algorithm it uses for
+ * detecting new variables won't work with this buggy
+ * implementation of GetNextVariableName().
+ */
+ efivar_wq_enabled = false;
+
+ s8 = kzalloc(len8, GFP_KERNEL);
+ if (!s8)
+ return;
+
+ for (i = 0; i < len8; i++)
+ s8[i] = s16[i];
+
+ printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n",
+ s8, vendor_guid);
+ kfree(s8);
+}
+
int register_efivars(struct efivars *efivars,
const struct efivar_operations *ops,
struct kobject *parent_kobj)
&vendor_guid);
switch (status) {
case EFI_SUCCESS:
+ variable_name_size = var_name_strnsize(variable_name,
+ variable_name_size);
+
+ /*
+ * Some firmware implementations return the
+ * same variable name on multiple calls to
+ * get_next_variable(). Terminate the loop
+ * immediately as there is no guarantee that
+ * we'll ever see a different variable name,
+ * and may end up looping here forever.
+ */
+ if (variable_is_present(variable_name, &vendor_guid)) {
+ dup_variable_bug(variable_name, &vendor_guid,
+ variable_name_size);
+ status = EFI_NOT_FOUND;
+ break;
+ }
+
efivar_create_sysfs_entry(efivars,
variable_name_size,
variable_name,
if (error)
unregister_efivars(efivars);
- efivars->efi_pstore_info = efi_pstore_info;
-
- efivars->efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
- if (efivars->efi_pstore_info.buf) {
- efivars->efi_pstore_info.bufsize = 1024;
- efivars->efi_pstore_info.data = efivars;
- spin_lock_init(&efivars->efi_pstore_info.buf_lock);
- pstore_register(&efivars->efi_pstore_info);
- }
+ if (!efivars_pstore_disable)
+ efivar_pstore_register(efivars);
register_filesystem(&efivarfs_type);
/*
* Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/module.h>
-#include <mach/cpu.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
#include <mach/msm_gpiomux.h>
-#include <mach/msm_iomap.h>
/* see 80-VA736-2 Rev C pp 695-751
**
** macros.
*/
-#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
-#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
-#define MSM_GPIO1_SHADOW_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
-#define MSM_GPIO2_SHADOW_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
+#define MSM_GPIO1_REG(off) (off)
+#define MSM_GPIO2_REG(off) (off)
+#define MSM_GPIO1_SHADOW_REG(off) (off)
+#define MSM_GPIO2_SHADOW_REG(off) (off)
/*
* MSM7X00 registers
#define MSM_GPIO_BANK(soc, bank, first, last) \
{ \
- .regs = { \
- .out = soc##_GPIO_OUT_##bank, \
- .in = soc##_GPIO_IN_##bank, \
- .int_status = soc##_GPIO_INT_STATUS_##bank, \
- .int_clear = soc##_GPIO_INT_CLEAR_##bank, \
- .int_en = soc##_GPIO_INT_EN_##bank, \
- .int_edge = soc##_GPIO_INT_EDGE_##bank, \
- .int_pos = soc##_GPIO_INT_POS_##bank, \
- .oe = soc##_GPIO_OE_##bank, \
- }, \
+ .regs[MSM_GPIO_OUT] = soc##_GPIO_OUT_##bank, \
+ .regs[MSM_GPIO_IN] = soc##_GPIO_IN_##bank, \
+ .regs[MSM_GPIO_INT_STATUS] = soc##_GPIO_INT_STATUS_##bank, \
+ .regs[MSM_GPIO_INT_CLEAR] = soc##_GPIO_INT_CLEAR_##bank, \
+ .regs[MSM_GPIO_INT_EN] = soc##_GPIO_INT_EN_##bank, \
+ .regs[MSM_GPIO_INT_EDGE] = soc##_GPIO_INT_EDGE_##bank, \
+ .regs[MSM_GPIO_INT_POS] = soc##_GPIO_INT_POS_##bank, \
+ .regs[MSM_GPIO_OE] = soc##_GPIO_OE_##bank, \
.chip = { \
.base = (first), \
.ngpio = (last) - (first) + 1, \
#define MSM_GPIO_BROKEN_INT_CLEAR 1
-struct msm_gpio_regs {
- void __iomem *out;
- void __iomem *in;
- void __iomem *int_status;
- void __iomem *int_clear;
- void __iomem *int_en;
- void __iomem *int_edge;
- void __iomem *int_pos;
- void __iomem *oe;
+enum msm_gpio_reg {
+ MSM_GPIO_IN,
+ MSM_GPIO_OUT,
+ MSM_GPIO_INT_STATUS,
+ MSM_GPIO_INT_CLEAR,
+ MSM_GPIO_INT_EN,
+ MSM_GPIO_INT_EDGE,
+ MSM_GPIO_INT_POS,
+ MSM_GPIO_OE,
+ MSM_GPIO_REG_NR
};
struct msm_gpio_chip {
spinlock_t lock;
struct gpio_chip chip;
- struct msm_gpio_regs regs;
+ unsigned long regs[MSM_GPIO_REG_NR];
#if MSM_GPIO_BROKEN_INT_CLEAR
unsigned int_status_copy;
#endif
unsigned int both_edge_detect;
unsigned int int_enable[2]; /* 0: awake, 1: sleep */
+ void __iomem *base;
+};
+
+struct msm_gpio_initdata {
+ struct msm_gpio_chip *chips;
+ int count;
};
+static void msm_gpio_writel(struct msm_gpio_chip *chip, u32 val,
+ enum msm_gpio_reg reg)
+{
+ writel(val, chip->base + chip->regs[reg]);
+}
+
+static u32 msm_gpio_readl(struct msm_gpio_chip *chip, enum msm_gpio_reg reg)
+{
+ return readl(chip->base + chip->regs[reg]);
+}
+
static int msm_gpio_write(struct msm_gpio_chip *msm_chip,
unsigned offset, unsigned on)
{
unsigned mask = BIT(offset);
unsigned val;
- val = readl(msm_chip->regs.out);
+ val = msm_gpio_readl(msm_chip, MSM_GPIO_OUT);
if (on)
- writel(val | mask, msm_chip->regs.out);
+ msm_gpio_writel(msm_chip, val | mask, MSM_GPIO_OUT);
else
- writel(val & ~mask, msm_chip->regs.out);
+ msm_gpio_writel(msm_chip, val & ~mask, MSM_GPIO_OUT);
return 0;
}
int loop_limit = 100;
unsigned pol, val, val2, intstat;
do {
- val = readl(msm_chip->regs.in);
- pol = readl(msm_chip->regs.int_pos);
+ val = msm_gpio_readl(msm_chip, MSM_GPIO_IN);
+ pol = msm_gpio_readl(msm_chip, MSM_GPIO_INT_POS);
pol = (pol & ~msm_chip->both_edge_detect) |
(~val & msm_chip->both_edge_detect);
- writel(pol, msm_chip->regs.int_pos);
- intstat = readl(msm_chip->regs.int_status);
- val2 = readl(msm_chip->regs.in);
+ msm_gpio_writel(msm_chip, pol, MSM_GPIO_INT_POS);
+ intstat = msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS);
+ val2 = msm_gpio_readl(msm_chip, MSM_GPIO_IN);
if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0)
return;
} while (loop_limit-- > 0);
/* Save interrupts that already triggered before we loose them. */
/* Any interrupt that triggers between the read of int_status */
/* and the write to int_clear will still be lost though. */
- msm_chip->int_status_copy |= readl(msm_chip->regs.int_status);
+ msm_chip->int_status_copy |=
+ msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS);
msm_chip->int_status_copy &= ~bit;
#endif
- writel(bit, msm_chip->regs.int_clear);
+ msm_gpio_writel(msm_chip, bit, MSM_GPIO_INT_CLEAR);
msm_gpio_update_both_edge_detect(msm_chip);
return 0;
}
{
struct msm_gpio_chip *msm_chip;
unsigned long irq_flags;
+ u32 val;
msm_chip = container_of(chip, struct msm_gpio_chip, chip);
spin_lock_irqsave(&msm_chip->lock, irq_flags);
- writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe);
+ val = msm_gpio_readl(msm_chip, MSM_GPIO_OE) & ~BIT(offset);
+ msm_gpio_writel(msm_chip, val, MSM_GPIO_OE);
spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
return 0;
}
{
struct msm_gpio_chip *msm_chip;
unsigned long irq_flags;
+ u32 val;
msm_chip = container_of(chip, struct msm_gpio_chip, chip);
spin_lock_irqsave(&msm_chip->lock, irq_flags);
msm_gpio_write(msm_chip, offset, value);
- writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe);
+ val = msm_gpio_readl(msm_chip, MSM_GPIO_OE) | BIT(offset);
+ msm_gpio_writel(msm_chip, val, MSM_GPIO_OE);
spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
return 0;
}
struct msm_gpio_chip *msm_chip;
msm_chip = container_of(chip, struct msm_gpio_chip, chip);
- return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0;
+ return (msm_gpio_readl(msm_chip, MSM_GPIO_IN) & (1U << offset)) ? 1 : 0;
}
static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
MSM_GPIO_BANK(MSM7X00, 5, 107, 121),
};
+static struct msm_gpio_initdata msm_gpio_7x01_init = {
+ .chips = msm_gpio_chips_msm7x01,
+ .count = ARRAY_SIZE(msm_gpio_chips_msm7x01),
+};
+
static struct msm_gpio_chip msm_gpio_chips_msm7x30[] = {
MSM_GPIO_BANK(MSM7X30, 0, 0, 15),
MSM_GPIO_BANK(MSM7X30, 1, 16, 43),
MSM_GPIO_BANK(MSM7X30, 7, 151, 181),
};
+static struct msm_gpio_initdata msm_gpio_7x30_init = {
+ .chips = msm_gpio_chips_msm7x30,
+ .count = ARRAY_SIZE(msm_gpio_chips_msm7x30),
+};
+
static struct msm_gpio_chip msm_gpio_chips_qsd8x50[] = {
MSM_GPIO_BANK(QSD8X50, 0, 0, 15),
MSM_GPIO_BANK(QSD8X50, 1, 16, 42),
MSM_GPIO_BANK(QSD8X50, 7, 153, 164),
};
+static struct msm_gpio_initdata msm_gpio_8x50_init = {
+ .chips = msm_gpio_chips_qsd8x50,
+ .count = ARRAY_SIZE(msm_gpio_chips_qsd8x50),
+};
+
static void msm_gpio_irq_ack(struct irq_data *d)
{
unsigned long irq_flags;
spin_lock_irqsave(&msm_chip->lock, irq_flags);
/* level triggered interrupts are also latched */
- if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+ if (!(msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE) & BIT(offset)))
msm_gpio_clear_detect_status(msm_chip, offset);
msm_chip->int_enable[0] &= ~BIT(offset);
- writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+ msm_gpio_writel(msm_chip, msm_chip->int_enable[0], MSM_GPIO_INT_EN);
spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
}
spin_lock_irqsave(&msm_chip->lock, irq_flags);
/* level triggered interrupts are also latched */
- if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+ if (!(msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE) & BIT(offset)))
msm_gpio_clear_detect_status(msm_chip, offset);
msm_chip->int_enable[0] |= BIT(offset);
- writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+ msm_gpio_writel(msm_chip, msm_chip->int_enable[0], MSM_GPIO_INT_EN);
spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
}
unsigned val, mask = BIT(offset);
spin_lock_irqsave(&msm_chip->lock, irq_flags);
- val = readl(msm_chip->regs.int_edge);
+ val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE);
if (flow_type & IRQ_TYPE_EDGE_BOTH) {
- writel(val | mask, msm_chip->regs.int_edge);
+ msm_gpio_writel(msm_chip, val | mask, MSM_GPIO_INT_EDGE);
__irq_set_handler_locked(d->irq, handle_edge_irq);
} else {
- writel(val & ~mask, msm_chip->regs.int_edge);
+ msm_gpio_writel(msm_chip, val & ~mask, MSM_GPIO_INT_EDGE);
__irq_set_handler_locked(d->irq, handle_level_irq);
}
if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
msm_gpio_update_both_edge_detect(msm_chip);
} else {
msm_chip->both_edge_detect &= ~mask;
- val = readl(msm_chip->regs.int_pos);
+ val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_POS);
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
- writel(val | mask, msm_chip->regs.int_pos);
+ val |= mask;
else
- writel(val & ~mask, msm_chip->regs.int_pos);
+ val &= ~mask;
+ msm_gpio_writel(msm_chip, val, MSM_GPIO_INT_POS);
}
spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
return 0;
for (i = 0; i < msm_gpio_count; i++) {
struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i];
- val = readl(msm_chip->regs.int_status);
+ val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS);
val &= msm_chip->int_enable[0];
while (val) {
mask = val & -val;
.irq_set_type = msm_gpio_irq_set_type,
};
-static int __init msm_init_gpio(void)
+static int __devinit gpio_msm_v1_probe(struct platform_device *pdev)
{
int i, j = 0;
-
- if (cpu_is_msm7x01()) {
- msm_gpio_chips = msm_gpio_chips_msm7x01;
- msm_gpio_count = ARRAY_SIZE(msm_gpio_chips_msm7x01);
- } else if (cpu_is_msm7x30()) {
- msm_gpio_chips = msm_gpio_chips_msm7x30;
- msm_gpio_count = ARRAY_SIZE(msm_gpio_chips_msm7x30);
- } else if (cpu_is_qsd8x50()) {
- msm_gpio_chips = msm_gpio_chips_qsd8x50;
- msm_gpio_count = ARRAY_SIZE(msm_gpio_chips_qsd8x50);
- } else {
- return 0;
- }
+ const struct platform_device_id *dev_id = platform_get_device_id(pdev);
+ struct msm_gpio_initdata *data;
+ int irq1, irq2;
+ struct resource *res;
+ void __iomem *base1, __iomem *base2;
+
+ data = (struct msm_gpio_initdata *)dev_id->driver_data;
+ msm_gpio_chips = data->chips;
+ msm_gpio_count = data->count;
+
+ irq1 = platform_get_irq(pdev, 0);
+ if (irq1 < 0)
+ return irq1;
+
+ irq2 = platform_get_irq(pdev, 1);
+ if (irq2 < 0)
+ return irq2;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base1 = devm_request_and_ioremap(&pdev->dev, res);
+ if (!base1)
+ return -EADDRNOTAVAIL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ base2 = devm_request_and_ioremap(&pdev->dev, res);
+ if (!base2)
+ return -EADDRNOTAVAIL;
for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) {
if (i - FIRST_GPIO_IRQ >=
}
for (i = 0; i < msm_gpio_count; i++) {
+ if (i == 1)
+ msm_gpio_chips[i].base = base2;
+ else
+ msm_gpio_chips[i].base = base1;
spin_lock_init(&msm_gpio_chips[i].lock);
- writel(0, msm_gpio_chips[i].regs.int_en);
+ msm_gpio_writel(&msm_gpio_chips[i], 0, MSM_GPIO_INT_EN);
gpiochip_add(&msm_gpio_chips[i].chip);
}
- irq_set_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler);
- irq_set_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler);
- irq_set_irq_wake(INT_GPIO_GROUP1, 1);
- irq_set_irq_wake(INT_GPIO_GROUP2, 2);
+ irq_set_chained_handler(irq1, msm_gpio_irq_handler);
+ irq_set_chained_handler(irq2, msm_gpio_irq_handler);
+ irq_set_irq_wake(irq1, 1);
+ irq_set_irq_wake(irq2, 2);
return 0;
}
-postcore_initcall(msm_init_gpio);
+static struct platform_device_id gpio_msm_v1_device_ids[] = {
+ { "gpio-msm-7201", (unsigned long)&msm_gpio_7x01_init },
+ { "gpio-msm-7x30", (unsigned long)&msm_gpio_7x30_init },
+ { "gpio-msm-8x50", (unsigned long)&msm_gpio_8x50_init },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, gpio_msm_v1_device_ids);
+
+static struct platform_driver gpio_msm_v1_driver = {
+ .driver = {
+ .name = "gpio-msm-v1",
+ .owner = THIS_MODULE,
+ },
+ .probe = gpio_msm_v1_probe,
+ .id_table = gpio_msm_v1_device_ids,
+};
+
+static int __init gpio_msm_v1_init(void)
+{
+ return platform_driver_register(&gpio_msm_v1_driver);
+}
+postcore_initcall(gpio_msm_v1_init);
+MODULE_LICENSE("GPL v2");
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
-#include <asm/mach/irq.h>
-
#include <mach/msm_gpiomux.h>
#include <mach/msm_iomap.h>
#include <linux/io.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
+#include <linux/clk.h>
#include <linux/pinctrl/consumer.h>
/*
struct resource *res;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
+ struct clk *clk;
unsigned int ngpios;
int soc_variant;
int i, cpu, id;
return id;
}
+ clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+
mvchip->soc_variant = soc_variant;
mvchip->chip.label = dev_name(&pdev->dev);
mvchip->chip.dev = &pdev->dev;
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <asm-generic/bug.h>
-#include <asm/mach/irq.h>
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
-#include <asm/mach/irq.h>
-
#define OFF_MODE 1
static LIST_HEAD(omap_gpio_list);
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
#include <linux/amba/pl061.h>
#include <linux/slab.h>
#include <linux/pm.h>
-#include <asm/mach/irq.h>
#define GPIODIR 0x400
#define GPIOIS 0x404
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <asm/mach/irq.h>
-
#include <mach/irqs.h>
/*
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm.h>
-#include <asm/mach/irq.h>
-
#define GPIO_BANK(x) ((x) >> 5)
#define GPIO_PORT(x) (((x) >> 3) & 0x3)
#define GPIO_BIT(x) ((x) & 0x7)
if (!np)
return;
- do {
+ for (;; index++) {
ret = of_parse_phandle_with_args(np, "gpio-ranges",
"#gpio-range-cells", index, &pinspec);
if (ret)
if (ret)
break;
-
- } while (index++);
+ }
}
#else
unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
- unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 2 | pt->vsync_offset_pulse_width_lo >> 4;
unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
/* ignore tiny modes */
}
mode->type = DRM_MODE_TYPE_DRIVER;
+ mode->vrefresh = drm_mode_vrefresh(mode);
drm_mode_set_name(mode);
return mode;
/* position control register for hardware window 0, 2 ~ 4.*/
#define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16)
#define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16)
-/* size control register for hardware window 0. */
-#define VIDOSD_C_SIZE_W0 (VIDOSD_BASE + 0x08)
-/* alpha control register for hardware window 1 ~ 4. */
-#define VIDOSD_C(win) (VIDOSD_BASE + 0x18 + (win) * 16)
-/* size control register for hardware window 1 ~ 4. */
+/*
+ * size control register for hardware windows 0 and alpha control register
+ * for hardware windows 1 ~ 4
+ */
+#define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16)
+/* size control register for hardware windows 1 ~ 2. */
#define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16)
#define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8)
#define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4)
/* color key control register for hardware window 1 ~ 4. */
-#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + (x * 8))
+#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8))
/* color key value register for hardware window 1 ~ 4. */
-#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + (x * 8))
+#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8))
/* FIMD has totally five hardware windows. */
#define WINDOWS_NR 5
#ifdef CONFIG_OF
static const struct of_device_id fimd_driver_dt_match[] = {
- { .compatible = "samsung,exynos4-fimd",
+ { .compatible = "samsung,exynos4210-fimd",
.data = &exynos4_fimd_driver_data },
- { .compatible = "samsung,exynos5-fimd",
+ { .compatible = "samsung,exynos5250-fimd",
.data = &exynos5_fimd_driver_data },
{},
};
if (win != 3 && win != 4) {
u32 offset = VIDOSD_D(win);
if (win == 0)
- offset = VIDOSD_C_SIZE_W0;
+ offset = VIDOSD_C(win);
val = win_data->ovl_width * win_data->ovl_height;
writel(val, ctx->regs + offset);
/* registers for base address */
#define G2D_SRC_BASE_ADDR 0x0304
+#define G2D_SRC_COLOR_MODE 0x030C
+#define G2D_SRC_LEFT_TOP 0x0310
+#define G2D_SRC_RIGHT_BOTTOM 0x0314
#define G2D_SRC_PLANE2_BASE_ADDR 0x0318
#define G2D_DST_BASE_ADDR 0x0404
+#define G2D_DST_COLOR_MODE 0x040C
+#define G2D_DST_LEFT_TOP 0x0410
+#define G2D_DST_RIGHT_BOTTOM 0x0414
#define G2D_DST_PLANE2_BASE_ADDR 0x0418
#define G2D_PAT_BASE_ADDR 0x0500
#define G2D_MSK_BASE_ADDR 0x0520
#define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
/* G2D_DMA_HOLD_CMD */
-#define G2D_USET_HOLD (1 << 2)
+#define G2D_USER_HOLD (1 << 2)
#define G2D_LIST_HOLD (1 << 1)
#define G2D_BITBLT_HOLD (1 << 0)
#define G2D_START_NHOLT (1 << 1)
#define G2D_START_BITBLT (1 << 0)
+/* buffer color format */
+#define G2D_FMT_XRGB8888 0
+#define G2D_FMT_ARGB8888 1
+#define G2D_FMT_RGB565 2
+#define G2D_FMT_XRGB1555 3
+#define G2D_FMT_ARGB1555 4
+#define G2D_FMT_XRGB4444 5
+#define G2D_FMT_ARGB4444 6
+#define G2D_FMT_PACKED_RGB888 7
+#define G2D_FMT_A8 11
+#define G2D_FMT_L8 12
+
+/* buffer valid length */
+#define G2D_LEN_MIN 1
+#define G2D_LEN_MAX 8000
+
#define G2D_CMDLIST_SIZE (PAGE_SIZE / 4)
#define G2D_CMDLIST_NUM 64
#define G2D_CMDLIST_POOL_SIZE (G2D_CMDLIST_SIZE * G2D_CMDLIST_NUM)
#define G2D_CMDLIST_DATA_NUM (G2D_CMDLIST_SIZE / sizeof(u32) - 2)
-#define MAX_BUF_ADDR_NR 6
-
/* maximum buffer pool size of userptr is 64MB as default */
#define MAX_POOL (64 * 1024 * 1024)
BUF_TYPE_USERPTR,
};
+enum g2d_reg_type {
+ REG_TYPE_NONE = -1,
+ REG_TYPE_SRC,
+ REG_TYPE_SRC_PLANE2,
+ REG_TYPE_DST,
+ REG_TYPE_DST_PLANE2,
+ REG_TYPE_PAT,
+ REG_TYPE_MSK,
+ MAX_REG_TYPE_NR
+};
+
/* cmdlist data structure */
struct g2d_cmdlist {
u32 head;
u32 last; /* last data offset */
};
+/*
+ * A structure of buffer description
+ *
+ * @format: color format
+ * @left_x: the x coordinates of left top corner
+ * @top_y: the y coordinates of left top corner
+ * @right_x: the x coordinates of right bottom corner
+ * @bottom_y: the y coordinates of right bottom corner
+ *
+ */
+struct g2d_buf_desc {
+ unsigned int format;
+ unsigned int left_x;
+ unsigned int top_y;
+ unsigned int right_x;
+ unsigned int bottom_y;
+};
+
+/*
+ * A structure of buffer information
+ *
+ * @map_nr: manages the number of mapped buffers
+ * @reg_types: stores regitster type in the order of requested command
+ * @handles: stores buffer handle in its reg_type position
+ * @types: stores buffer type in its reg_type position
+ * @descs: stores buffer description in its reg_type position
+ *
+ */
+struct g2d_buf_info {
+ unsigned int map_nr;
+ enum g2d_reg_type reg_types[MAX_REG_TYPE_NR];
+ unsigned long handles[MAX_REG_TYPE_NR];
+ unsigned int types[MAX_REG_TYPE_NR];
+ struct g2d_buf_desc descs[MAX_REG_TYPE_NR];
+};
+
struct drm_exynos_pending_g2d_event {
struct drm_pending_event base;
struct drm_exynos_g2d_event event;
bool in_pool;
bool out_of_list;
};
-
struct g2d_cmdlist_node {
struct list_head list;
struct g2d_cmdlist *cmdlist;
- unsigned int map_nr;
- unsigned long handles[MAX_BUF_ADDR_NR];
- unsigned int obj_type[MAX_BUF_ADDR_NR];
dma_addr_t dma_addr;
+ struct g2d_buf_info buf_info;
struct drm_exynos_pending_g2d_event *event;
};
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
int nr;
int ret;
+ struct g2d_buf_info *buf_info;
init_dma_attrs(&g2d->cmdlist_dma_attrs);
dma_set_attr(DMA_ATTR_WRITE_COMBINE, &g2d->cmdlist_dma_attrs);
}
for (nr = 0; nr < G2D_CMDLIST_NUM; nr++) {
+ unsigned int i;
+
node[nr].cmdlist =
g2d->cmdlist_pool_virt + nr * G2D_CMDLIST_SIZE;
node[nr].dma_addr =
g2d->cmdlist_pool + nr * G2D_CMDLIST_SIZE;
+ buf_info = &node[nr].buf_info;
+ for (i = 0; i < MAX_REG_TYPE_NR; i++)
+ buf_info->reg_types[i] = REG_TYPE_NONE;
+
list_add_tail(&node[nr].list, &g2d->free_cmdlist);
}
DMA_BIDIRECTIONAL);
if (ret < 0) {
DRM_ERROR("failed to map sgt with dma region.\n");
- goto err_free_sgt;
+ goto err_sg_free_table;
}
g2d_userptr->dma_addr = sgt->sgl[0].dma_address;
return &g2d_userptr->dma_addr;
-err_free_sgt:
+err_sg_free_table:
sg_free_table(sgt);
+
+err_free_sgt:
kfree(sgt);
sgt = NULL;
g2d->current_pool = 0;
}
+static enum g2d_reg_type g2d_get_reg_type(int reg_offset)
+{
+ enum g2d_reg_type reg_type;
+
+ switch (reg_offset) {
+ case G2D_SRC_BASE_ADDR:
+ case G2D_SRC_COLOR_MODE:
+ case G2D_SRC_LEFT_TOP:
+ case G2D_SRC_RIGHT_BOTTOM:
+ reg_type = REG_TYPE_SRC;
+ break;
+ case G2D_SRC_PLANE2_BASE_ADDR:
+ reg_type = REG_TYPE_SRC_PLANE2;
+ break;
+ case G2D_DST_BASE_ADDR:
+ case G2D_DST_COLOR_MODE:
+ case G2D_DST_LEFT_TOP:
+ case G2D_DST_RIGHT_BOTTOM:
+ reg_type = REG_TYPE_DST;
+ break;
+ case G2D_DST_PLANE2_BASE_ADDR:
+ reg_type = REG_TYPE_DST_PLANE2;
+ break;
+ case G2D_PAT_BASE_ADDR:
+ reg_type = REG_TYPE_PAT;
+ break;
+ case G2D_MSK_BASE_ADDR:
+ reg_type = REG_TYPE_MSK;
+ break;
+ default:
+ reg_type = REG_TYPE_NONE;
+ DRM_ERROR("Unknown register offset![%d]\n", reg_offset);
+ break;
+ };
+
+ return reg_type;
+}
+
+static unsigned long g2d_get_buf_bpp(unsigned int format)
+{
+ unsigned long bpp;
+
+ switch (format) {
+ case G2D_FMT_XRGB8888:
+ case G2D_FMT_ARGB8888:
+ bpp = 4;
+ break;
+ case G2D_FMT_RGB565:
+ case G2D_FMT_XRGB1555:
+ case G2D_FMT_ARGB1555:
+ case G2D_FMT_XRGB4444:
+ case G2D_FMT_ARGB4444:
+ bpp = 2;
+ break;
+ case G2D_FMT_PACKED_RGB888:
+ bpp = 3;
+ break;
+ default:
+ bpp = 1;
+ break;
+ }
+
+ return bpp;
+}
+
+static bool g2d_check_buf_desc_is_valid(struct g2d_buf_desc *buf_desc,
+ enum g2d_reg_type reg_type,
+ unsigned long size)
+{
+ unsigned int width, height;
+ unsigned long area;
+
+ /*
+ * check source and destination buffers only.
+ * so the others are always valid.
+ */
+ if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST)
+ return true;
+
+ width = buf_desc->right_x - buf_desc->left_x;
+ if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) {
+ DRM_ERROR("width[%u] is out of range!\n", width);
+ return false;
+ }
+
+ height = buf_desc->bottom_y - buf_desc->top_y;
+ if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) {
+ DRM_ERROR("height[%u] is out of range!\n", height);
+ return false;
+ }
+
+ area = (unsigned long)width * (unsigned long)height *
+ g2d_get_buf_bpp(buf_desc->format);
+ if (area > size) {
+ DRM_ERROR("area[%lu] is out of range[%lu]!\n", area, size);
+ return false;
+ }
+
+ return true;
+}
+
static int g2d_map_cmdlist_gem(struct g2d_data *g2d,
struct g2d_cmdlist_node *node,
struct drm_device *drm_dev,
struct drm_file *file)
{
struct g2d_cmdlist *cmdlist = node->cmdlist;
+ struct g2d_buf_info *buf_info = &node->buf_info;
int offset;
+ int ret;
int i;
- for (i = 0; i < node->map_nr; i++) {
+ for (i = 0; i < buf_info->map_nr; i++) {
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ int reg_pos;
unsigned long handle;
dma_addr_t *addr;
- offset = cmdlist->last - (i * 2 + 1);
- handle = cmdlist->data[offset];
+ reg_pos = cmdlist->last - 2 * (i + 1);
+
+ offset = cmdlist->data[reg_pos];
+ handle = cmdlist->data[reg_pos + 1];
+
+ reg_type = g2d_get_reg_type(offset);
+ if (reg_type == REG_TYPE_NONE) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ buf_desc = &buf_info->descs[reg_type];
+
+ if (buf_info->types[reg_type] == BUF_TYPE_GEM) {
+ unsigned long size;
+
+ size = exynos_drm_gem_get_size(drm_dev, handle, file);
+ if (!size) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
+ size)) {
+ ret = -EFAULT;
+ goto err;
+ }
- if (node->obj_type[i] == BUF_TYPE_GEM) {
addr = exynos_drm_gem_get_dma_addr(drm_dev, handle,
file);
if (IS_ERR(addr)) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
}
} else {
struct drm_exynos_g2d_userptr g2d_userptr;
if (copy_from_user(&g2d_userptr, (void __user *)handle,
sizeof(struct drm_exynos_g2d_userptr))) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
+ }
+
+ if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
+ g2d_userptr.size)) {
+ ret = -EFAULT;
+ goto err;
}
addr = g2d_userptr_get_dma_addr(drm_dev,
file,
&handle);
if (IS_ERR(addr)) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
}
}
- cmdlist->data[offset] = *addr;
- node->handles[i] = handle;
+ cmdlist->data[reg_pos + 1] = *addr;
+ buf_info->reg_types[i] = reg_type;
+ buf_info->handles[reg_type] = handle;
}
return 0;
+
+err:
+ buf_info->map_nr = i;
+ return ret;
}
static void g2d_unmap_cmdlist_gem(struct g2d_data *g2d,
struct drm_file *filp)
{
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
+ struct g2d_buf_info *buf_info = &node->buf_info;
int i;
- for (i = 0; i < node->map_nr; i++) {
- unsigned long handle = node->handles[i];
+ for (i = 0; i < buf_info->map_nr; i++) {
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ unsigned long handle;
+
+ reg_type = buf_info->reg_types[i];
+
+ buf_desc = &buf_info->descs[reg_type];
+ handle = buf_info->handles[reg_type];
- if (node->obj_type[i] == BUF_TYPE_GEM)
+ if (buf_info->types[reg_type] == BUF_TYPE_GEM)
exynos_drm_gem_put_dma_addr(subdrv->drm_dev, handle,
filp);
else
g2d_userptr_put_dma_addr(subdrv->drm_dev, handle,
false);
- node->handles[i] = 0;
+ buf_info->reg_types[i] = REG_TYPE_NONE;
+ buf_info->handles[reg_type] = 0;
+ buf_info->types[reg_type] = 0;
+ memset(buf_desc, 0x00, sizeof(*buf_desc));
}
- node->map_nr = 0;
+ buf_info->map_nr = 0;
}
static void g2d_dma_start(struct g2d_data *g2d,
pm_runtime_get_sync(g2d->dev);
clk_enable(g2d->gate_clk);
- /* interrupt enable */
- writel_relaxed(G2D_INTEN_ACF | G2D_INTEN_UCF | G2D_INTEN_GCF,
- g2d->regs + G2D_INTEN);
-
writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
}
struct g2d_data *g2d = container_of(work, struct g2d_data,
runqueue_work);
-
mutex_lock(&g2d->runqueue_mutex);
clk_disable(g2d->gate_clk);
pm_runtime_put_sync(g2d->dev);
int i;
for (i = 0; i < nr; i++) {
- index = cmdlist->last - 2 * (i + 1);
+ struct g2d_buf_info *buf_info = &node->buf_info;
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ unsigned long value;
- if (for_addr) {
- /* check userptr buffer type. */
- reg_offset = (cmdlist->data[index] &
- ~0x7fffffff) >> 31;
- if (reg_offset) {
- node->obj_type[i] = BUF_TYPE_USERPTR;
- cmdlist->data[index] &= ~G2D_BUF_USERPTR;
- }
- }
+ index = cmdlist->last - 2 * (i + 1);
reg_offset = cmdlist->data[index] & ~0xfffff000;
-
if (reg_offset < G2D_VALID_START || reg_offset > G2D_VALID_END)
goto err;
if (reg_offset % 4)
if (!for_addr)
goto err;
- if (node->obj_type[i] != BUF_TYPE_USERPTR)
- node->obj_type[i] = BUF_TYPE_GEM;
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ /* check userptr buffer type. */
+ if ((cmdlist->data[index] & ~0x7fffffff) >> 31) {
+ buf_info->types[reg_type] = BUF_TYPE_USERPTR;
+ cmdlist->data[index] &= ~G2D_BUF_USERPTR;
+ } else
+ buf_info->types[reg_type] = BUF_TYPE_GEM;
+ break;
+ case G2D_SRC_COLOR_MODE:
+ case G2D_DST_COLOR_MODE:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->format = value & 0xf;
+ break;
+ case G2D_SRC_LEFT_TOP:
+ case G2D_DST_LEFT_TOP:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->left_x = value & 0x1fff;
+ buf_desc->top_y = (value & 0x1fff0000) >> 16;
+ break;
+ case G2D_SRC_RIGHT_BOTTOM:
+ case G2D_DST_RIGHT_BOTTOM:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->right_x = value & 0x1fff;
+ buf_desc->bottom_y = (value & 0x1fff0000) >> 16;
break;
default:
if (for_addr)
cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR;
cmdlist->data[cmdlist->last++] = 0;
+ /*
+ * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG
+ * and GCF bit should be set to INTEN register if user wants
+ * G2D interrupt event once current command list execution is
+ * finished.
+ * Otherwise only ACF bit should be set to INTEN register so
+ * that one interrupt is occured after all command lists
+ * have been completed.
+ */
if (node->event) {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF;
cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD;
cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD;
+ } else {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF;
}
/* Check size of cmdlist: last 2 is about G2D_BITBLT_START */
if (ret < 0)
goto err_free_event;
- node->map_nr = req->cmd_buf_nr;
+ node->buf_info.map_nr = req->cmd_buf_nr;
if (req->cmd_buf_nr) {
struct drm_exynos_g2d_cmd *cmd_buf;
exynos_gem_obj = NULL;
}
+unsigned long exynos_drm_gem_get_size(struct drm_device *dev,
+ unsigned int gem_handle,
+ struct drm_file *file_priv)
+{
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+ struct drm_gem_object *obj;
+
+ obj = drm_gem_object_lookup(dev, file_priv, gem_handle);
+ if (!obj) {
+ DRM_ERROR("failed to lookup gem object.\n");
+ return 0;
+ }
+
+ exynos_gem_obj = to_exynos_gem_obj(obj);
+
+ drm_gem_object_unreference_unlocked(obj);
+
+ return exynos_gem_obj->buffer->size;
+}
+
+
struct exynos_drm_gem_obj *exynos_drm_gem_init(struct drm_device *dev,
unsigned long size)
{
int exynos_drm_gem_get_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+/* get buffer size to gem handle. */
+unsigned long exynos_drm_gem_get_size(struct drm_device *dev,
+ unsigned int gem_handle,
+ struct drm_file *file_priv);
+
/* initialize gem object. */
int exynos_drm_gem_init_object(struct drm_gem_object *obj);
}
edid_len = (1 + ctx->raw_edid->extensions) * EDID_LENGTH;
- edid = kzalloc(edid_len, GFP_KERNEL);
+ edid = kmemdup(ctx->raw_edid, edid_len, GFP_KERNEL);
if (!edid) {
DRM_DEBUG_KMS("failed to allocate edid\n");
return ERR_PTR(-ENOMEM);
}
- memcpy(edid, ctx->raw_edid, edid_len);
return edid;
}
return -EINVAL;
}
edid_len = (1 + raw_edid->extensions) * EDID_LENGTH;
- ctx->raw_edid = kzalloc(edid_len, GFP_KERNEL);
+ ctx->raw_edid = kmemdup(raw_edid, edid_len, GFP_KERNEL);
if (!ctx->raw_edid) {
DRM_DEBUG_KMS("failed to allocate raw_edid.\n");
return -ENOMEM;
}
- memcpy(ctx->raw_edid, raw_edid, edid_len);
} else {
/*
* with connection = 0, free raw_edid
mixer_ctx->win_data[win].enabled = false;
}
-int mixer_check_timing(void *ctx, struct fb_videomode *timing)
+static int mixer_check_timing(void *ctx, struct fb_videomode *timing)
{
struct mixer_context *mixer_ctx = ctx;
u32 w, h;
static void
describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
{
- seq_printf(m, "%p: %s%s %8zdKiB %02x %02x %d %d %d%s%s%s",
+ seq_printf(m, "%pK: %s%s %8zdKiB %02x %02x %d %d %d%s%s%s",
&obj->base,
get_pin_flag(obj),
get_tiling_flag(obj),
"Enable Haswell and ValleyView Support. "
"(default: false)");
+int i915_disable_power_well __read_mostly = 0;
+module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
+MODULE_PARM_DESC(disable_power_well,
+ "Disable the power well when possible (default: false)");
+
static struct drm_driver driver;
extern int intel_agp_enabled;
extern bool i915_enable_hangcheck __read_mostly;
extern int i915_enable_ppgtt __read_mostly;
extern unsigned int i915_preliminary_hw_support __read_mostly;
+extern int i915_disable_power_well __read_mostly;
extern int i915_suspend(struct drm_device *dev, pm_message_t state);
extern int i915_resume(struct drm_device *dev);
int count)
{
int i;
+ int relocs_total = 0;
+ int relocs_max = INT_MAX / sizeof(struct drm_i915_gem_relocation_entry);
for (i = 0; i < count; i++) {
char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
if (exec[i].flags & __EXEC_OBJECT_UNKNOWN_FLAGS)
return -EINVAL;
- /* First check for malicious input causing overflow */
- if (exec[i].relocation_count >
- INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+ /* First check for malicious input causing overflow in
+ * the worst case where we need to allocate the entire
+ * relocation tree as a single array.
+ */
+ if (exec[i].relocation_count > relocs_max - relocs_total)
return -EINVAL;
+ relocs_total += exec[i].relocation_count;
length = exec[i].relocation_count *
sizeof(struct drm_i915_gem_relocation_entry);
num_connectors++;
}
+ if (is_cpu_edp)
+ intel_crtc->cpu_transcoder = TRANSCODER_EDP;
+ else
+ intel_crtc->cpu_transcoder = pipe;
+
/* We are not sure yet this won't happen. */
WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
INTEL_PCH_TYPE(dev));
int pipe = intel_crtc->pipe;
int ret;
- if (IS_HASWELL(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
- intel_crtc->cpu_transcoder = TRANSCODER_EDP;
- else
- intel_crtc->cpu_transcoder = pipe;
-
drm_vblank_pre_modeset(dev, pipe);
ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ int target_clock;
/*
* Find the lane count in the intel_encoder private
}
}
+ target_clock = mode->clock;
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+ target_clock = intel_edp_target_clock(intel_encoder,
+ mode);
+ break;
+ }
+ }
+
/*
* Compute the GMCH and Link ratios. The '3' here is
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
intel_link_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
+ target_clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
for (i = 0; i < intel_dp->lane_count; i++)
if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
- if (i == intel_dp->lane_count && voltage_tries == 5) {
+ if (i == intel_dp->lane_count) {
++loop_tries;
if (loop_tries == 5) {
DRM_DEBUG_KMS("too many full retries, give up\n");
algo->data = bus;
}
-#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4)
+/*
+ * gmbus on gen4 seems to be able to generate legacy interrupts even when in MSI
+ * mode. This results in spurious interrupt warnings if the legacy irq no. is
+ * shared with another device. The kernel then disables that interrupt source
+ * and so prevents the other device from working properly.
+ */
+#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
static int
gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
u32 gmbus2_status,
u32 gmbus2 = 0;
DEFINE_WAIT(wait);
+ if (!HAS_GMBUS_IRQ(dev_priv->dev))
+ gmbus4_irq_en = 0;
+
/* Important: The hw handles only the first bit, so set only one! Since
* we also need to check for NAKs besides the hw ready/idle signal, we
* need to wake up periodically and check that ourselves. */
if (dev_priv->backlight_level == 0)
dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
- dev_priv->backlight_enabled = true;
- intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
-
if (INTEL_INFO(dev)->gen >= 4) {
uint32_t reg, tmp;
}
set_level:
- /* Check the current backlight level and try to set again if it's zero.
- * On some machines, BLC_PWM_CPU_CTL is cleared to zero automatically
- * when BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1 are written.
+ /* Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1.
+ * BLC_PWM_CPU_CTL may be cleared to zero automatically when these
+ * registers are set.
*/
- if (!intel_panel_get_backlight(dev))
- intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
+ dev_priv->backlight_enabled = true;
+ intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
}
static void intel_panel_init_backlight(struct drm_device *dev)
if (!IS_HASWELL(dev))
return;
+ if (!i915_disable_power_well && !enable)
+ return;
+
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
is_enabled = tmp & HSW_PWR_WELL_STATE;
enable_requested = tmp & HSW_PWR_WELL_ENABLE;
m = n = p = 0;
vcomax = 800000;
vcomin = 400000;
- pllreffreq = 3333;
+ pllreffreq = 33333;
delta = 0xffffffff;
permitteddelta = clock * 5 / 1000;
- for (testp = 16; testp > 0; testp--) {
+ for (testp = 16; testp > 0; testp >>= 1) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testm = 1; testm < 33; testm++) {
- for (testn = 1; testn < 257; testn++) {
+ for (testn = 17; testn < 257; testn++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
- m = (testm - 1) | ((n >> 1) & 0x80);
+ m = (testm - 1);
p = testp - 1;
}
if ((clock * testp) >= 600000)
- p |= 80;
+ p |= 0x80;
}
}
}
struct nouveau_object *parent = NULL;
struct nouveau_object *namedb = NULL;
struct nouveau_handle *handle = NULL;
- int ret = -EINVAL;
parent = nouveau_handle_ref(client, _parent);
if (!parent)
}
nouveau_object_ref(NULL, &parent);
- return ret;
+ return handle ? 0 : -EINVAL;
}
int
static void
nv50_disp_base_vblank_enable(struct nouveau_event *event, int head)
{
- nv_mask(event->priv, 0x61002c, (1 << head), (1 << head));
+ nv_mask(event->priv, 0x61002c, (4 << head), (4 << head));
}
static void
nv50_disp_base_vblank_disable(struct nouveau_event *event, int head)
{
- nv_mask(event->priv, 0x61002c, (1 << head), (0 << head));
+ nv_mask(event->priv, 0x61002c, (4 << head), 0);
}
static int
#include <core/device.h>
#include <core/subdev.h>
-enum nouveau_therm_mode {
+enum nouveau_therm_fan_mode {
NOUVEAU_THERM_CTRL_NONE = 0,
NOUVEAU_THERM_CTRL_MANUAL = 1,
NOUVEAU_THERM_CTRL_AUTO = 2,
}
int
-nouveau_therm_mode(struct nouveau_therm *therm, int mode)
+nouveau_therm_fan_mode(struct nouveau_therm *therm, int mode)
{
struct nouveau_therm_priv *priv = (void *)therm;
struct nouveau_device *device = nv_device(therm);
(mode != NOUVEAU_THERM_CTRL_NONE && device->card_type >= NV_C0))
return -EINVAL;
+ /* do not allow automatic fan management if the thermal sensor is
+ * not available */
+ if (priv->mode == 2 && therm->temp_get(therm) < 0)
+ return -EINVAL;
+
if (priv->mode == mode)
return 0;
- nv_info(therm, "Thermal management: %s\n", name[mode]);
+ nv_info(therm, "fan management: %s\n", name[mode]);
nouveau_therm_update(therm, mode);
return 0;
}
priv->fan->bios.max_duty = value;
return 0;
case NOUVEAU_THERM_ATTR_FAN_MODE:
- return nouveau_therm_mode(therm, value);
+ return nouveau_therm_fan_mode(therm, value);
case NOUVEAU_THERM_ATTR_THRS_FAN_BOOST:
priv->bios_sensor.thrs_fan_boost.temp = value;
priv->sensor.program_alarms(therm);
return ret;
if (priv->suspend >= 0)
- nouveau_therm_mode(therm, priv->mode);
+ nouveau_therm_fan_mode(therm, priv->mode);
priv->sensor.program_alarms(therm);
return 0;
}
int
nouveau_therm_preinit(struct nouveau_therm *therm)
{
- nouveau_therm_ic_ctor(therm);
nouveau_therm_sensor_ctor(therm);
+ nouveau_therm_ic_ctor(therm);
nouveau_therm_fan_ctor(therm);
- nouveau_therm_mode(therm, NOUVEAU_THERM_CTRL_NONE);
+ nouveau_therm_fan_mode(therm, NOUVEAU_THERM_CTRL_NONE);
+ nouveau_therm_sensor_preinit(therm);
return 0;
}
struct i2c_board_info *info)
{
struct nouveau_therm_priv *priv = (void *)nouveau_therm(i2c);
+ struct nvbios_therm_sensor *sensor = &priv->bios_sensor;
struct i2c_client *client;
request_module("%s%s", I2C_MODULE_PREFIX, info->type);
}
nv_info(priv,
- "Found an %s at address 0x%x (controlled by lm_sensors)\n",
- info->type, info->addr);
+ "Found an %s at address 0x%x (controlled by lm_sensors, "
+ "temp offset %+i C)\n",
+ info->type, info->addr, sensor->offset_constant);
priv->ic = client;
return true;
struct nouveau_therm_priv base;
};
+enum nv40_sensor_style { INVALID_STYLE = -1, OLD_STYLE = 0, NEW_STYLE = 1 };
+
+static enum nv40_sensor_style
+nv40_sensor_style(struct nouveau_therm *therm)
+{
+ struct nouveau_device *device = nv_device(therm);
+
+ switch (device->chipset) {
+ case 0x43:
+ case 0x44:
+ case 0x4a:
+ case 0x47:
+ return OLD_STYLE;
+
+ case 0x46:
+ case 0x49:
+ case 0x4b:
+ case 0x4e:
+ case 0x4c:
+ case 0x67:
+ case 0x68:
+ case 0x63:
+ return NEW_STYLE;
+ default:
+ return INVALID_STYLE;
+ }
+}
+
static int
nv40_sensor_setup(struct nouveau_therm *therm)
{
- struct nouveau_device *device = nv_device(therm);
+ enum nv40_sensor_style style = nv40_sensor_style(therm);
/* enable ADC readout and disable the ALARM threshold */
- if (device->chipset >= 0x46) {
+ if (style == NEW_STYLE) {
nv_mask(therm, 0x15b8, 0x80000000, 0);
nv_wr32(therm, 0x15b0, 0x80003fff);
- mdelay(10); /* wait for the temperature to stabilize */
+ mdelay(20); /* wait for the temperature to stabilize */
return nv_rd32(therm, 0x15b4) & 0x3fff;
- } else {
+ } else if (style == OLD_STYLE) {
nv_wr32(therm, 0x15b0, 0xff);
+ mdelay(20); /* wait for the temperature to stabilize */
return nv_rd32(therm, 0x15b4) & 0xff;
- }
+ } else
+ return -ENODEV;
}
static int
nv40_temp_get(struct nouveau_therm *therm)
{
struct nouveau_therm_priv *priv = (void *)therm;
- struct nouveau_device *device = nv_device(therm);
struct nvbios_therm_sensor *sensor = &priv->bios_sensor;
+ enum nv40_sensor_style style = nv40_sensor_style(therm);
int core_temp;
- if (device->chipset >= 0x46) {
+ if (style == NEW_STYLE) {
nv_wr32(therm, 0x15b0, 0x80003fff);
core_temp = nv_rd32(therm, 0x15b4) & 0x3fff;
- } else {
+ } else if (style == OLD_STYLE) {
nv_wr32(therm, 0x15b0, 0xff);
core_temp = nv_rd32(therm, 0x15b4) & 0xff;
- }
-
- /* Setup the sensor if the temperature is 0 */
- if (core_temp == 0)
- core_temp = nv40_sensor_setup(therm);
+ } else
+ return -ENODEV;
- if (sensor->slope_div == 0)
- sensor->slope_div = 1;
- if (sensor->offset_den == 0)
- sensor->offset_den = 1;
- if (sensor->slope_mult < 1)
- sensor->slope_mult = 1;
+ /* if the slope or the offset is unset, do no use the sensor */
+ if (!sensor->slope_div || !sensor->slope_mult ||
+ !sensor->offset_num || !sensor->offset_den)
+ return -ENODEV;
core_temp = core_temp * sensor->slope_mult / sensor->slope_div;
core_temp = core_temp + sensor->offset_num / sensor->offset_den;
core_temp = core_temp + sensor->offset_constant - 8;
+ /* reserve negative temperatures for errors */
+ if (core_temp < 0)
+ core_temp = 0;
+
return core_temp;
}
struct i2c_client *ic;
};
-int nouveau_therm_mode(struct nouveau_therm *therm, int mode);
+int nouveau_therm_fan_mode(struct nouveau_therm *therm, int mode);
int nouveau_therm_attr_get(struct nouveau_therm *therm,
enum nouveau_therm_attr_type type);
int nouveau_therm_attr_set(struct nouveau_therm *therm,
int nouveau_therm_preinit(struct nouveau_therm *);
+void nouveau_therm_sensor_preinit(struct nouveau_therm *);
void nouveau_therm_sensor_set_threshold_state(struct nouveau_therm *therm,
enum nouveau_therm_thrs thrs,
enum nouveau_therm_thrs_state st);
{
struct nouveau_therm_priv *priv = (void *)therm;
- priv->bios_sensor.slope_mult = 1;
- priv->bios_sensor.slope_div = 1;
- priv->bios_sensor.offset_num = 0;
- priv->bios_sensor.offset_den = 1;
priv->bios_sensor.offset_constant = 0;
priv->bios_sensor.thrs_fan_boost.temp = 90;
struct nouveau_therm_priv *priv = (void *)therm;
struct nvbios_therm_sensor *s = &priv->bios_sensor;
- if (!priv->bios_sensor.slope_div)
- priv->bios_sensor.slope_div = 1;
- if (!priv->bios_sensor.offset_den)
- priv->bios_sensor.offset_den = 1;
-
/* enforce a minimum hysteresis on thresholds */
s->thrs_fan_boost.hysteresis = max_t(u8, s->thrs_fan_boost.hysteresis, 2);
s->thrs_down_clock.hysteresis = max_t(u8, s->thrs_down_clock.hysteresis, 2);
const char *thresolds[] = {
"fanboost", "downclock", "critical", "shutdown"
};
- uint8_t temperature = therm->temp_get(therm);
+ int temperature = therm->temp_get(therm);
if (thrs < 0 || thrs > 3)
return;
if (dir == NOUVEAU_THERM_THRS_FALLING)
- nv_info(therm, "temperature (%u C) went below the '%s' threshold\n",
+ nv_info(therm, "temperature (%i C) went below the '%s' threshold\n",
temperature, thresolds[thrs]);
else
- nv_info(therm, "temperature (%u C) hit the '%s' threshold\n",
+ nv_info(therm, "temperature (%i C) hit the '%s' threshold\n",
temperature, thresolds[thrs]);
active = (dir == NOUVEAU_THERM_THRS_RISING);
case NOUVEAU_THERM_THRS_FANBOOST:
if (active) {
nouveau_therm_fan_set(therm, true, 100);
- nouveau_therm_mode(therm, NOUVEAU_THERM_CTRL_AUTO);
+ nouveau_therm_fan_mode(therm, NOUVEAU_THERM_CTRL_AUTO);
}
break;
case NOUVEAU_THERM_THRS_DOWNCLOCK:
NOUVEAU_THERM_THRS_SHUTDOWN);
/* schedule the next poll in one second */
- if (list_empty(&alarm->head))
+ if (therm->temp_get(therm) >= 0 && list_empty(&alarm->head))
ptimer->alarm(ptimer, 1000 * 1000 * 1000, alarm);
spin_unlock_irqrestore(&priv->sensor.alarm_program_lock, flags);
alarm_timer_callback(&priv->sensor.therm_poll_alarm);
}
+void
+nouveau_therm_sensor_preinit(struct nouveau_therm *therm)
+{
+ const char *sensor_avail = "yes";
+
+ if (therm->temp_get(therm) < 0)
+ sensor_avail = "no";
+
+ nv_info(therm, "internal sensor: %s\n", sensor_avail);
+}
+
int
nouveau_therm_sensor_ctor(struct nouveau_therm *therm)
{
{
struct nouveau_abi16_ntfy *ntfy, *temp;
+ /* wait for all activity to stop before releasing notify object, which
+ * may be still in use */
+ if (chan->chan && chan->ntfy)
+ nouveau_channel_idle(chan->chan);
+
/* cleanup notifier state */
list_for_each_entry_safe(ntfy, temp, &chan->notifiers, head) {
nouveau_abi16_ntfy_fini(chan, ntfy);
stride = 16 * 4;
height = amount / stride;
- if (new_mem->mem_type == TTM_PL_VRAM &&
+ if (old_mem->mem_type == TTM_PL_VRAM &&
nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
BEGIN_NV04(chan, NvSubCopy, 0x0200, 1);
OUT_RING (chan, 1);
}
- if (old_mem->mem_type == TTM_PL_VRAM &&
+ if (new_mem->mem_type == TTM_PL_VRAM &&
nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
struct drm_device *dev = dev_get_drvdata(d);
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_therm *therm = nouveau_therm(drm->device);
+ int temp = therm->temp_get(therm);
- return snprintf(buf, PAGE_SIZE, "%d\n", therm->temp_get(therm) * 1000);
+ if (temp < 0)
+ return temp;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", temp * 1000);
}
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, nouveau_hwmon_show_temp,
NULL, 0);
nouveau_hwmon_get_pwm1_max,
nouveau_hwmon_set_pwm1_max, 0);
-static struct attribute *hwmon_attributes[] = {
+static struct attribute *hwmon_default_attributes[] = {
+ &sensor_dev_attr_name.dev_attr.attr,
+ &sensor_dev_attr_update_rate.dev_attr.attr,
+ NULL
+};
+static struct attribute *hwmon_temp_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_emergency.dev_attr.attr,
&sensor_dev_attr_temp1_emergency_hyst.dev_attr.attr,
- &sensor_dev_attr_name.dev_attr.attr,
- &sensor_dev_attr_update_rate.dev_attr.attr,
NULL
};
static struct attribute *hwmon_fan_rpm_attributes[] = {
NULL
};
-static const struct attribute_group hwmon_attrgroup = {
- .attrs = hwmon_attributes,
+static const struct attribute_group hwmon_default_attrgroup = {
+ .attrs = hwmon_default_attributes,
+};
+static const struct attribute_group hwmon_temp_attrgroup = {
+ .attrs = hwmon_temp_attributes,
};
static const struct attribute_group hwmon_fan_rpm_attrgroup = {
.attrs = hwmon_fan_rpm_attributes,
}
dev_set_drvdata(hwmon_dev, dev);
- /* default sysfs entries */
- ret = sysfs_create_group(&hwmon_dev->kobj, &hwmon_attrgroup);
+ /* set the default attributes */
+ ret = sysfs_create_group(&hwmon_dev->kobj, &hwmon_default_attrgroup);
if (ret) {
if (ret)
goto error;
}
+ /* if the card has a working thermal sensor */
+ if (therm->temp_get(therm) >= 0) {
+ ret = sysfs_create_group(&hwmon_dev->kobj, &hwmon_temp_attrgroup);
+ if (ret) {
+ if (ret)
+ goto error;
+ }
+ }
+
/* if the card has a pwm fan */
/*XXX: incorrect, need better detection for this, some boards have
* the gpio entries for pwm fan control even when there's no
struct nouveau_pm *pm = nouveau_pm(dev);
if (pm->hwmon) {
- sysfs_remove_group(&pm->hwmon->kobj, &hwmon_attrgroup);
- sysfs_remove_group(&pm->hwmon->kobj,
- &hwmon_pwm_fan_attrgroup);
- sysfs_remove_group(&pm->hwmon->kobj,
- &hwmon_fan_rpm_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_default_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_temp_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_pwm_fan_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_fan_rpm_attrgroup);
hwmon_device_unregister(pm->hwmon);
}
swap_interval <<= 4;
if (swap_interval == 0)
swap_interval |= 0x100;
+ if (chan == NULL)
+ evo_sync(crtc->dev);
push = evo_wait(sync, 128);
if (unlikely(push == NULL))
sync->addr ^= 0x10;
sync->data++;
FIRE_RING (chan);
- } else {
- evo_sync(crtc->dev);
}
/* queue the flip */
NV_WARN(drm, "failed to create encoder %d/%d/%d: %d\n",
dcbe->location, dcbe->type,
ffs(dcbe->or) - 1, ret);
+ ret = 0;
}
}
(rdev->pdev->device == 0x9907) ||
(rdev->pdev->device == 0x9908) ||
(rdev->pdev->device == 0x9909) ||
+ (rdev->pdev->device == 0x990B) ||
+ (rdev->pdev->device == 0x990C) ||
+ (rdev->pdev->device == 0x990F) ||
(rdev->pdev->device == 0x9910) ||
- (rdev->pdev->device == 0x9917)) {
+ (rdev->pdev->device == 0x9917) ||
+ (rdev->pdev->device == 0x9999)) {
rdev->config.cayman.max_simds_per_se = 6;
rdev->config.cayman.max_backends_per_se = 2;
} else if ((rdev->pdev->device == 0x9903) ||
(rdev->pdev->device == 0x9904) ||
(rdev->pdev->device == 0x990A) ||
+ (rdev->pdev->device == 0x990D) ||
+ (rdev->pdev->device == 0x990E) ||
(rdev->pdev->device == 0x9913) ||
(rdev->pdev->device == 0x9918)) {
rdev->config.cayman.max_simds_per_se = 4;
(rdev->pdev->device == 0x9990) ||
(rdev->pdev->device == 0x9991) ||
(rdev->pdev->device == 0x9994) ||
+ (rdev->pdev->device == 0x9995) ||
+ (rdev->pdev->device == 0x9996) ||
+ (rdev->pdev->device == 0x999A) ||
(rdev->pdev->device == 0x99A0)) {
rdev->config.cayman.max_simds_per_se = 3;
rdev->config.cayman.max_backends_per_se = 1;
WREG32(DMA_TILING_CONFIG + DMA0_REGISTER_OFFSET, gb_addr_config);
WREG32(DMA_TILING_CONFIG + DMA1_REGISTER_OFFSET, gb_addr_config);
- tmp = gb_addr_config & NUM_PIPES_MASK;
- tmp = r6xx_remap_render_backend(rdev, tmp,
- rdev->config.cayman.max_backends_per_se *
- rdev->config.cayman.max_shader_engines,
- CAYMAN_MAX_BACKENDS, disabled_rb_mask);
+ if ((rdev->config.cayman.max_backends_per_se == 1) &&
+ (rdev->flags & RADEON_IS_IGP)) {
+ if ((disabled_rb_mask & 3) == 1) {
+ /* RB0 disabled, RB1 enabled */
+ tmp = 0x11111111;
+ } else {
+ /* RB1 disabled, RB0 enabled */
+ tmp = 0x00000000;
+ }
+ } else {
+ tmp = gb_addr_config & NUM_PIPES_MASK;
+ tmp = r6xx_remap_render_backend(rdev, tmp,
+ rdev->config.cayman.max_backends_per_se *
+ rdev->config.cayman.max_shader_engines,
+ CAYMAN_MAX_BACKENDS, disabled_rb_mask);
+ }
WREG32(GB_BACKEND_MAP, tmp);
cgts_tcc_disable = 0xffff0000;
int cayman_suspend(struct radeon_device *rdev)
{
r600_audio_fini(rdev);
+ radeon_vm_manager_fini(rdev);
cayman_cp_enable(rdev, false);
cayman_dma_stop(rdev);
evergreen_irq_suspend(rdev);
goto out_cleanup;
}
- /* r100 doesn't have dma engine so skip the test */
- /* also, VRAM-to-VRAM test doesn't make much sense for DMA */
- /* skip it as well if domains are the same */
- if ((rdev->asic->copy.dma) && (sdomain != ddomain)) {
+ if (rdev->asic->copy.dma) {
time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
RADEON_BENCHMARK_COPY_DMA, n);
if (time < 0)
sdomain, ddomain, "dma");
}
- time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
- RADEON_BENCHMARK_COPY_BLIT, n);
- if (time < 0)
- goto out_cleanup;
- if (time > 0)
- radeon_benchmark_log_results(n, size, time,
- sdomain, ddomain, "blit");
+ if (rdev->asic->copy.blit) {
+ time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
+ RADEON_BENCHMARK_COPY_BLIT, n);
+ if (time < 0)
+ goto out_cleanup;
+ if (time > 0)
+ radeon_benchmark_log_results(n, size, time,
+ sdomain, ddomain, "blit");
+ }
out_cleanup:
if (sobj) {
int si_suspend(struct radeon_device *rdev)
{
+ radeon_vm_manager_fini(rdev);
si_cp_enable(rdev, false);
cayman_dma_stop(rdev);
si_irq_suspend(rdev);
#define USB_VENDOR_ID_MONTEREY 0x0566
#define USB_DEVICE_ID_GENIUS_KB29E 0x3004
+#define USB_VENDOR_ID_MSI 0x1770
+#define USB_DEVICE_ID_MSI_GX680R_LED_PANEL 0xff00
+
#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
#define USB_DEVICE_ID_N_S_HARMONY 0xc359
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 0x3001
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
+#define USB_VENDOR_ID_REALTEK 0x0bda
+#define USB_DEVICE_ID_REALTEK_READER 0x0152
+
#define USB_VENDOR_ID_ROCCAT 0x1e7d
#define USB_DEVICE_ID_ROCCAT_ARVO 0x30d4
#define USB_DEVICE_ID_ROCCAT_ISKU 0x319c
{
struct mt_device *td = hid_get_drvdata(hid);
__s32 quirks = td->mtclass.quirks;
+ struct input_dev *input = field->hidinput->input;
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
break;
default:
+ if (usage->type)
+ input_event(input, usage->type, usage->code,
+ value);
return;
}
if (usage->usage_index + 1 == field->report_count) {
/* we only take into account the last report. */
if (usage->hid == td->last_slot_field)
- mt_complete_slot(td, field->hidinput->input);
+ mt_complete_slot(td, input);
if (field->index == td->last_field_index
&& td->num_received >= td->num_expected)
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_REALTEK, USB_DEVICE_ID_REALTEK_READER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SIGMATEL, USB_DEVICE_ID_SIGMATEL_STMP3780, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
+ NULL
};
static const struct attribute_group pem_input_group = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan3_input.dev_attr.attr,
+ NULL
};
static const struct attribute_group pem_fan_group = {
which contains this code, we don't worry about the wasted space.
*/
-#include <linux/hwmon.h>
+#include <linux/kernel.h>
/* straight from the datasheet */
#define LM75_TEMP_MIN (-55000)
struct ltc2978_data {
enum chips id;
int vin_min, vin_max;
- int temp_min, temp_max;
+ int temp_min, temp_max[2];
int vout_min[8], vout_max[8];
int iout_max[2];
int temp2_max;
ret = pmbus_read_word_data(client, page,
LTC2978_MFR_TEMPERATURE_PEAK);
if (ret >= 0) {
- if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
- data->temp_max = ret;
- ret = data->temp_max;
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->temp_max[page]))
+ data->temp_max[page] = ret;
+ ret = data->temp_max[page];
}
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ data->temp_max[page] = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
default:
data->vin_min = 0x7bff;
data->vin_max = 0x7c00;
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+ data->temp_max[i] = 0x7c00;
data->temp2_max = 0x7c00;
switch (data->id) {
static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
{
if (data->num_attributes >= data->max_attributes - 1) {
- data->max_attributes += PMBUS_ATTR_ALLOC_SIZE;
- data->group.attrs = krealloc(data->group.attrs,
- sizeof(struct attribute *) *
- data->max_attributes, GFP_KERNEL);
- if (data->group.attrs == NULL)
+ int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
+ void *new_attrs = krealloc(data->group.attrs,
+ new_max_attrs * sizeof(void *),
+ GFP_KERNEL);
+ if (!new_attrs)
return -ENOMEM;
+ data->group.attrs = new_attrs;
+ data->max_attributes = new_max_attrs;
}
data->group.attrs[data->num_attributes++] = attr;
menuconfig I2C
tristate "I2C support"
- depends on !S390
select RT_MUTEXES
---help---
I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
config I2C_SMBUS
tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
+ depends on GENERIC_HARDIRQS
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
config I2C_OCORES
tristate "OpenCores I2C Controller"
+ depends on GENERIC_HARDIRQS
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
config I2C_PARPORT
tristate "Parallel port adapter"
- depends on PARPORT
+ depends on PARPORT && GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
+ depends on GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
/* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
#define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59
#define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15
#define ISMT_DESC_ENTRIES 32 /* number of descriptor entries */
#define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */
static const DEFINE_PCI_DEVICE_TABLE(ismt_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
{ 0, }
};
int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
u32 clk_divisor;
- tegra_i2c_clock_enable(i2c_dev);
+ err = tegra_i2c_clock_enable(i2c_dev);
+ if (err < 0) {
+ dev_err(i2c_dev->dev, "Clock enable failed %d\n", err);
+ return err;
+ }
tegra_periph_reset_assert(i2c_dev->div_clk);
udelay(2);
if (i2c_dev->is_suspended)
return -EBUSY;
- tegra_i2c_clock_enable(i2c_dev);
+ ret = tegra_i2c_clock_enable(i2c_dev);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev, "Clock enable failed %d\n", ret);
+ return ret;
+ }
+
for (i = 0; i < num; i++) {
enum msg_end_type end_type = MSG_END_STOP;
if (i < (num - 1)) {
*
* Copyright (c) 2010 Ericsson AB.
*
- * Author: Guenter Roeck <guenter.roeck@ericsson.com>
+ * Author: Guenter Roeck <linux@roeck-us.net>
*
* Derived from:
* pca954x.c
int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
{
int err;
- struct st_sensor_odr_avl odr_out;
+ struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
err = st_sensors_match_odr(sdata->sensor, odr, &odr_out);
static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
{
- int err, i;
+ int err, i = 0;
struct st_sensor_data *sdata = iio_priv(indio_dev);
err = st_sensors_match_fs(sdata->sensor, fs, &i);
int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
{
- bool found;
u8 tmp_value;
int err = -EINVAL;
- struct st_sensor_odr_avl odr_out;
+ bool found = false;
+ struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
if (enable) {
- found = false;
tmp_value = sdata->sensor->pw.value_on;
if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
(sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
#define AD5064_ADDR(x) ((x) << 20)
#define AD5064_CMD(x) ((x) << 24)
-#define AD5064_ADDR_DAC(chan) (chan)
#define AD5064_ADDR_ALL_DAC 0xF
#define AD5064_CMD_WRITE_INPUT_N 0x0
}
static int ad5064_sync_powerdown_mode(struct ad5064_state *st,
- unsigned int channel)
+ const struct iio_chan_spec *chan)
{
unsigned int val;
int ret;
- val = (0x1 << channel);
+ val = (0x1 << chan->address);
- if (st->pwr_down[channel])
- val |= st->pwr_down_mode[channel] << 8;
+ if (st->pwr_down[chan->channel])
+ val |= st->pwr_down_mode[chan->channel] << 8;
ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0);
mutex_lock(&indio_dev->mlock);
st->pwr_down_mode[chan->channel] = mode + 1;
- ret = ad5064_sync_powerdown_mode(st, chan->channel);
+ ret = ad5064_sync_powerdown_mode(st, chan);
mutex_unlock(&indio_dev->mlock);
return ret;
mutex_lock(&indio_dev->mlock);
st->pwr_down[chan->channel] = pwr_down;
- ret = ad5064_sync_powerdown_mode(st, chan->channel);
+ ret = ad5064_sync_powerdown_mode(st, chan);
mutex_unlock(&indio_dev->mlock);
return ret ? ret : len;
}
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (val > (1 << chan->scan_type.realbits) || val < 0)
+ if (val >= (1 << chan->scan_type.realbits) || val < 0)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
{ },
};
-#define AD5064_CHANNEL(chan, bits) { \
+#define AD5064_CHANNEL(chan, addr, bits) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
.channel = (chan), \
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
- .address = AD5064_ADDR_DAC(chan), \
+ .address = addr, \
.scan_type = IIO_ST('u', (bits), 16, 20 - (bits)), \
.ext_info = ad5064_ext_info, \
}
#define DECLARE_AD5064_CHANNELS(name, bits) \
const struct iio_chan_spec name[] = { \
- AD5064_CHANNEL(0, bits), \
- AD5064_CHANNEL(1, bits), \
- AD5064_CHANNEL(2, bits), \
- AD5064_CHANNEL(3, bits), \
- AD5064_CHANNEL(4, bits), \
- AD5064_CHANNEL(5, bits), \
- AD5064_CHANNEL(6, bits), \
- AD5064_CHANNEL(7, bits), \
+ AD5064_CHANNEL(0, 0, bits), \
+ AD5064_CHANNEL(1, 1, bits), \
+ AD5064_CHANNEL(2, 2, bits), \
+ AD5064_CHANNEL(3, 3, bits), \
+ AD5064_CHANNEL(4, 4, bits), \
+ AD5064_CHANNEL(5, 5, bits), \
+ AD5064_CHANNEL(6, 6, bits), \
+ AD5064_CHANNEL(7, 7, bits), \
+}
+
+#define DECLARE_AD5065_CHANNELS(name, bits) \
+const struct iio_chan_spec name[] = { \
+ AD5064_CHANNEL(0, 0, bits), \
+ AD5064_CHANNEL(1, 3, bits), \
}
static DECLARE_AD5064_CHANNELS(ad5024_channels, 12);
static DECLARE_AD5064_CHANNELS(ad5044_channels, 14);
static DECLARE_AD5064_CHANNELS(ad5064_channels, 16);
+static DECLARE_AD5065_CHANNELS(ad5025_channels, 12);
+static DECLARE_AD5065_CHANNELS(ad5045_channels, 14);
+static DECLARE_AD5065_CHANNELS(ad5065_channels, 16);
+
static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
[ID_AD5024] = {
.shared_vref = false,
},
[ID_AD5025] = {
.shared_vref = false,
- .channels = ad5024_channels,
+ .channels = ad5025_channels,
.num_channels = 2,
},
[ID_AD5044] = {
},
[ID_AD5045] = {
.shared_vref = false,
- .channels = ad5044_channels,
+ .channels = ad5045_channels,
.num_channels = 2,
},
[ID_AD5064] = {
},
[ID_AD5065] = {
.shared_vref = false,
- .channels = ad5064_channels,
+ .channels = ad5065_channels,
.num_channels = 2,
},
[ID_AD5628_1] = {
{
struct iio_dev *indio_dev;
struct ad5064_state *st;
+ unsigned int midscale;
unsigned int i;
int ret;
goto error_free_reg;
}
- for (i = 0; i < st->chip_info->num_channels; ++i) {
- st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
- st->dac_cache[i] = 0x8000;
- }
-
indio_dev->dev.parent = dev;
indio_dev->name = name;
indio_dev->info = &ad5064_info;
indio_dev->channels = st->chip_info->channels;
indio_dev->num_channels = st->chip_info->num_channels;
+ midscale = (1 << indio_dev->channels[0].scan_type.realbits) / 2;
+
+ for (i = 0; i < st->chip_info->num_channels; ++i) {
+ st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
+ st->dac_cache[i] = midscale;
+ }
+
ret = iio_device_register(indio_dev);
if (ret)
goto error_disable_reg;
config INV_MPU6050_IIO
tristate "Invensense MPU6050 devices"
depends on I2C && SYSFS
+ select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
This driver supports the Invensense MPU6050 devices.
neigh = dst_neigh_lookup(ep->dst,
&ep->com.cm_id->remote_addr.sin_addr.s_addr);
+ if (!neigh) {
+ pr_err("%s - cannot alloc neigh.\n", __func__);
+ err = -ENOMEM;
+ goto fail4;
+ }
+
/* get a l2t entry */
if (neigh->dev->flags & IFF_LOOPBACK) {
PDBG("%s LOOPBACK\n", __func__);
dst = &rt->dst;
neigh = dst_neigh_lookup_skb(dst, skb);
+ if (!neigh) {
+ pr_err("%s - failed to allocate neigh!\n",
+ __func__);
+ goto free_dst;
+ }
+
if (neigh->dev->flags & IFF_LOOPBACK) {
pdev = ip_dev_find(&init_net, iph->daddr);
e = cxgb4_l2t_get(dev->rdev.lldi.l2t, neigh,
wq->rq.queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, &(wq->rq.dma_addr),
GFP_KERNEL);
- if (!wq->rq.queue)
+ if (!wq->rq.queue) {
+ ret = -ENOMEM;
goto free_sq;
+ }
PDBG("%s sq base va 0x%p pa 0x%llx rq base va 0x%p pa 0x%llx\n",
__func__, wq->sq.queue,
(unsigned long long)virt_to_phys(wq->sq.queue),
goto bail;
}
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
+ opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0x7f;
dev->opstats[opcode].n_bytes += tlen;
dev->opstats[opcode].n_packets++;
INIT_LIST_HEAD(&dev->sriov.cm_list);
dev->sriov.sl_id_map = RB_ROOT;
idr_init(&dev->sriov.pv_id_table);
- idr_pre_get(&dev->sriov.pv_id_table, GFP_KERNEL);
}
/* slave = -1 ==> all slaves */
config INFINIBAND_QIB
- tristate "QLogic PCIe HCA support"
+ tristate "Intel PCIe HCA support"
depends on 64BIT
---help---
- This is a low-level driver for QLogic PCIe QLE InfiniBand host
- channel adapters. This driver does not support the QLogic
+ This is a low-level driver for Intel PCIe QLE InfiniBand host
+ channel adapters. This driver does not support the Intel
HyperTransport card (model QHT7140).
/*
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
"Attempt pre-IBTA 1.2 DDR speed negotiation");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_AUTHOR("QLogic <support@qlogic.com>");
-MODULE_DESCRIPTION("QLogic IB driver");
+MODULE_AUTHOR("Intel <ibsupport@intel.com>");
+MODULE_DESCRIPTION("Intel IB driver");
MODULE_VERSION(QIB_DRIVER_VERSION);
/*
/*
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
* All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
/*
* This file contains all the chip-specific register information and
- * access functions for the QLogic QLogic_IB PCI-Express chip.
+ * access functions for the Intel Intel_IB PCI-Express chip.
*
*/
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
static void qib_remove_one(struct pci_dev *);
static int qib_init_one(struct pci_dev *, const struct pci_device_id *);
-#define DRIVER_LOAD_MSG "QLogic " QIB_DRV_NAME " loaded: "
+#define DRIVER_LOAD_MSG "Intel " QIB_DRV_NAME " loaded: "
#define PFX QIB_DRV_NAME ": "
static DEFINE_PCI_DEVICE_TABLE(qib_pci_tbl) = {
dd = qib_init_iba6120_funcs(pdev, ent);
#else
qib_early_err(&pdev->dev,
- "QLogic PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
+ "Intel PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
ent->device);
dd = ERR_PTR(-ENODEV);
#endif
default:
qib_early_err(&pdev->dev,
- "Failing on unknown QLogic deviceid 0x%x\n",
+ "Failing on unknown Intel deviceid 0x%x\n",
ent->device);
ret = -ENODEV;
}
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
#include "qib.h"
#include "qib_7220.h"
-#define SD7220_FW_NAME "qlogic/sd7220.fw"
+#define SD7220_FW_NAME "intel/sd7220.fw"
MODULE_FIRMWARE(SD7220_FW_NAME);
/*
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
ibdev->dma_ops = &qib_dma_mapping_ops;
snprintf(ibdev->node_desc, sizeof(ibdev->node_desc),
- "QLogic Infiniband HCA %s", init_utsname()->nodename);
+ "Intel Infiniband HCA %s", init_utsname()->nodename);
ret = ib_register_device(ibdev, qib_create_port_files);
if (ret)
if (++priv->tx_outstanding == ipoib_sendq_size) {
ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
tx->qp->qp_num);
- if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
- ipoib_warn(priv, "request notify on send CQ failed\n");
netif_stop_queue(dev);
+ rc = ib_req_notify_cq(priv->send_cq,
+ IB_CQ_NEXT_COMP | IB_CQ_REPORT_MISSED_EVENTS);
+ if (rc < 0)
+ ipoib_warn(priv, "request notify on send CQ failed\n");
+ else if (rc)
+ ipoib_send_comp_handler(priv->send_cq, dev);
}
}
}
#define GET_TIME(x) rdtscl(x)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__)
+#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_TILE)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
-#define TIME_NAME "PCC"
-#elif defined(CONFIG_MN10300) || defined(CONFIG_TILE)
-#define GET_TIME(x) do { x = get_cycles(); } while (0)
-#define DELTA(x, y) ((x) - (y))
-#define TIME_NAME "TSC"
+#define TIME_NAME "get_cycles"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
#define TC3589x_EVT_INT_CLR 0x2
#define TC3589x_KBD_INT_CLR 0x1
-#define TC3589x_KBD_KEYMAP_SIZE 64
-
/**
* struct tc_keypad - data structure used by keypad driver
* @tc3589x: pointer to tc35893
const struct tc3589x_keypad_platform_data *board;
unsigned int krow;
unsigned int kcol;
- unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+ unsigned short *keymap;
bool keypad_stopped;
};
error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
- keypad->keymap, input);
+ NULL, input);
if (error) {
dev_err(&pdev->dev, "Failed to build keymap\n");
goto err_free_mem;
}
+ keypad->keymap = input->keycode;
+
input_set_capability(input, EV_MSC, MSC_SCAN);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);
f->y_map |= (p[5] & 0x20) << 6;
}
+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
+{
+ f->first_mp = !!(p[0] & 0x02);
+ f->is_mp = !!(p[0] & 0x20);
+
+ f->fingers = ((p[0] & 0x6) >> 1 |
+ (p[0] & 0x10) >> 2);
+ f->x_map = ((p[2] & 0x60) >> 5) |
+ ((p[4] & 0x7f) << 2) |
+ ((p[5] & 0x7f) << 9) |
+ ((p[3] & 0x07) << 16) |
+ ((p[3] & 0x70) << 15) |
+ ((p[0] & 0x01) << 22);
+ f->y_map = (p[1] & 0x7f) |
+ ((p[2] & 0x1f) << 7);
+
+ f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+ f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+ f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+
+ alps_decode_buttons_v3(f, p);
+}
+
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
}
/* Bytes 2 - pktsize should have 0 in the highest bit */
- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
+ if (priv->proto_version != ALPS_PROTO_V5 &&
+ psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
return 0;
}
-static int alps_enter_command_mode(struct psmouse *psmouse,
- unsigned char *resp)
+static int alps_enter_command_mode(struct psmouse *psmouse)
{
unsigned char param[4];
return -1;
}
- if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
+ if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
+ param[0] != 0x73) {
psmouse_dbg(psmouse,
"unknown response while entering command mode\n");
return -1;
}
-
- if (resp)
- *resp = param[2];
return 0;
}
{
int reg_val, ret = -1;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
return -1;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
{
int ret = -EIO, reg_val;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
* supported by this driver. If bit 1 isn't set the packet
* format is different.
*/
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_write_reg(psmouse,
reg_base + 0x08, 0x82) ||
alps_exit_command_mode(psmouse))
alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
goto error;
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_absolute_mode_v3(psmouse)) {
psmouse_err(psmouse, "Failed to enter absolute mode\n");
goto error;
priv->flags &= ~ALPS_DUALPOINT;
}
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
goto error;
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
if (alps_absolute_mode_v4(psmouse)) {
return -1;
}
+static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[2];
+
+ /* This is dolphin "v1" as empirically defined by florin9doi */
+ param[0] = 0x64;
+ param[1] = 0x28;
+
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
+ return -1;
+
+ return 0;
+}
+
static void alps_set_defaults(struct alps_data *priv)
{
priv->byte0 = 0x8f;
priv->nibble_commands = alps_v4_nibble_commands;
priv->addr_command = PSMOUSE_CMD_DISABLE;
break;
+ case ALPS_PROTO_V5:
+ priv->hw_init = alps_hw_init_dolphin_v1;
+ priv->process_packet = alps_process_packet_v3;
+ priv->decode_fields = alps_decode_dolphin;
+ priv->set_abs_params = alps_set_abs_params_mt;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+ priv->byte0 = 0xc8;
+ priv->mask0 = 0xc8;
+ priv->flags = 0;
+ priv->x_max = 1360;
+ priv->y_max = 660;
+ priv->x_bits = 23;
+ priv->y_bits = 12;
+ break;
}
}
return -EIO;
if (alps_match_table(psmouse, priv, e7, ec) == 0) {
+ return 0;
+ } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
+ ec[0] == 0x73 && ec[1] == 0x01) {
+ priv->proto_version = ALPS_PROTO_V5;
+ alps_set_defaults(priv);
+
return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x08) {
priv->proto_version = ALPS_PROTO_V3;
#define ALPS_PROTO_V2 2
#define ALPS_PROTO_V3 3
#define ALPS_PROTO_V4 4
+#define ALPS_PROTO_V5 5
/**
* struct alps_model_info - touchpad ID table
cytp->fw_version = param[2] & FW_VERSION_MASX;
cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0;
+ /*
+ * Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to
+ * CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594.
+ */
+ if (cytp->fw_version >= 11)
+ cytp->tp_metrics_supported = 0;
+
psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version);
psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n",
cytp->tp_metrics_supported);
cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
+ if (!cytp->tp_metrics_supported)
+ return 0;
+
memset(param, 0, sizeof(param));
if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) {
/* Update trackpad parameters. */
static int cypress_query_hardware(struct psmouse *psmouse)
{
- struct cytp_data *cytp = psmouse->private;
int ret;
ret = cypress_read_fw_version(psmouse);
if (ret)
return ret;
- if (cytp->tp_metrics_supported) {
- ret = cypress_read_tp_metrics(psmouse);
- if (ret)
- return ret;
- }
+ ret = cypress_read_tp_metrics(psmouse);
+ if (ret)
+ return ret;
return 0;
}
static const struct wacom_features wacom_features_0x101 =
{ "Wacom ISDv4 101", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10D =
+ { "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
+ { USB_DEVICE_WACOM(0x10D) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
/* Must be called with ts->lock held */
static void __ads7846_enable(struct ads7846 *ts)
{
- regulator_enable(ts->reg);
+ int error;
+
+ error = regulator_enable(ts->reg);
+ if (error != 0)
+ dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
+
ads7846_restart(ts);
}
struct i2c_client *client = data->client;
int error;
- if (data->core_reg)
- regulator_enable(data->core_reg);
- if (data->io_reg)
- regulator_enable(data->io_reg);
+ error = regulator_enable(data->core_reg);
+ if (error) {
+ dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
+ return error;
+ }
+
+ error = regulator_enable(data->io_reg);
+ if (error) {
+ dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
+ regulator_disable(data->core_reg);
+ return error;
+ }
+
mdelay(MMS114_POWERON_DELAY);
error = mms114_setup_regs(data);
- if (error < 0)
+ if (error < 0) {
+ regulator_disable(data->io_reg);
+ regulator_disable(data->core_reg);
return error;
+ }
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(true);
static void mms114_stop(struct mms114_data *data)
{
struct i2c_client *client = data->client;
+ int error;
disable_irq(client->irq);
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(false);
- if (data->io_reg)
- regulator_disable(data->io_reg);
- if (data->core_reg)
- regulator_disable(data->core_reg);
+ error = regulator_disable(data->io_reg);
+ if (error)
+ dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
+
+ error = regulator_disable(data->core_reg);
+ if (error)
+ dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
}
static int mms114_input_open(struct input_dev *dev)
# OMAP IOMMU support
config OMAP_IOMMU
bool "OMAP IOMMU Support"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP2PLUS
select IOMMU_API
config OMAP_IOVMM
/* allocate a protection domain if a device is added */
dma_domain = find_protection_domain(devid);
- if (dma_domain)
- goto out;
- dma_domain = dma_ops_domain_alloc();
- if (!dma_domain)
- goto out;
- dma_domain->target_dev = devid;
-
- spin_lock_irqsave(&iommu_pd_list_lock, flags);
- list_add_tail(&dma_domain->list, &iommu_pd_list);
- spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
-
- dev_data = get_dev_data(dev);
+ if (!dma_domain) {
+ dma_domain = dma_ops_domain_alloc();
+ if (!dma_domain)
+ goto out;
+ dma_domain->target_dev = devid;
+
+ spin_lock_irqsave(&iommu_pd_list_lock, flags);
+ list_add_tail(&dma_domain->list, &iommu_pd_list);
+ spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ }
dev->archdata.dma_ops = &amd_iommu_dma_ops;
* BIOS should disable L2B micellaneous clock gating by setting
* L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b
*/
-static void __init amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
+static void amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
{
u32 value;
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/cpumask.h>
#include <linux/errno.h>
#include <linux/msi.h>
#include <linux/irq.h>
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
+obj-$(CONFIG_ARCH_MXS) += irq-mxs.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
-obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
+obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/mach/irq.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/smp.h>
+#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/slab.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/irqchip/arm-gic.h>
#include <asm/irq.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
-#include <asm/mach/irq.h>
#include "irqchip.h"
#else
#define gic_data_dist_base(d) ((d)->dist_base.common_base)
#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
-#define gic_set_base_accessor(d,f)
+#define gic_set_base_accessor(d, f)
#endif
static inline void __iomem *gic_dist_base(struct irq_data *d)
cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
if (unlikely(gic_irq < 32 || gic_irq > 1020))
- do_bad_IRQ(cascade_irq, desc);
+ handle_bad_irq(cascade_irq, desc);
else
generic_handle_irq(cascade_irq);
/* Convert our logical CPU mask into a physical one. */
for_each_cpu(cpu, mask)
- map |= 1 << cpu_logical_map(cpu);
+ map |= gic_cpu_map[cpu];
/*
* Ensure that stores to Normal memory are visible to the
return 0;
}
+#ifdef CONFIG_SMP
+static int __cpuinit gic_secondary_init(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_STARTING)
+ gic_cpu_init(&gic_data[0]);
+ return NOTIFY_OK;
+}
+
+/*
+ * Notifier for enabling the GIC CPU interface. Set an arbitrarily high
+ * priority because the GIC needs to be up before the ARM generic timers.
+ */
+static struct notifier_block __cpuinitdata gic_cpu_notifier = {
+ .notifier_call = gic_secondary_init,
+ .priority = 100,
+};
+#endif
+
const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
.xlate = gic_irq_domain_xlate,
#ifdef CONFIG_SMP
set_smp_cross_call(gic_raise_softirq);
+ register_cpu_notifier(&gic_cpu_notifier);
#endif
set_handle_irq(gic_handle_irq);
gic_pm_init(gic);
}
-void __cpuinit gic_secondary_init(unsigned int gic_nr)
-{
- BUG_ON(gic_nr >= MAX_GIC_NR);
-
- gic_cpu_init(&gic_data[gic_nr]);
-}
-
#ifdef CONFIG_OF
-static int gic_cnt __initdata = 0;
+static int gic_cnt __initdata;
int __init gic_of_init(struct device_node *node, struct device_node *parent)
{
--- /dev/null
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define HW_ICOLL_VECTOR 0x0000
+#define HW_ICOLL_LEVELACK 0x0010
+#define HW_ICOLL_CTRL 0x0020
+#define HW_ICOLL_STAT_OFFSET 0x0070
+#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10)
+#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10)
+#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
+#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1
+
+#define ICOLL_NUM_IRQS 128
+
+static void __iomem *icoll_base;
+static struct irq_domain *icoll_domain;
+
+static void icoll_ack_irq(struct irq_data *d)
+{
+ /*
+ * The Interrupt Collector is able to prioritize irqs.
+ * Currently only level 0 is used. So acking can use
+ * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
+ */
+ __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
+ icoll_base + HW_ICOLL_LEVELACK);
+}
+
+static void icoll_mask_irq(struct irq_data *d)
+{
+ __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+ icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+}
+
+static void icoll_unmask_irq(struct irq_data *d)
+{
+ __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+ icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+}
+
+static struct irq_chip mxs_icoll_chip = {
+ .irq_ack = icoll_ack_irq,
+ .irq_mask = icoll_mask_irq,
+ .irq_unmask = icoll_unmask_irq,
+};
+
+asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
+{
+ u32 irqnr;
+
+ do {
+ irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
+ if (irqnr != 0x7f) {
+ __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+ irqnr = irq_find_mapping(icoll_domain, irqnr);
+ handle_IRQ(irqnr, regs);
+ continue;
+ }
+ break;
+ } while (1);
+}
+
+static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID);
+
+ return 0;
+}
+
+static struct irq_domain_ops icoll_irq_domain_ops = {
+ .map = icoll_irq_domain_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static void __init icoll_of_init(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ icoll_base = of_iomap(np, 0);
+ WARN_ON(!icoll_base);
+
+ /*
+ * Interrupt Collector reset, which initializes the priority
+ * for each irq to level 0.
+ */
+ stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+
+ icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
+ &icoll_irq_domain_ops, NULL);
+ WARN_ON(!icoll_domain);
+}
+IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
--- /dev/null
+/*
+ * Allwinner A1X SoCs IRQ chip driver.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Benn Huang <benn@allwinnertech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
+
+#define SUN4I_IRQ_VECTOR_REG 0x00
+#define SUN4I_IRQ_PROTECTION_REG 0x08
+#define SUN4I_IRQ_NMI_CTRL_REG 0x0c
+#define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x)
+#define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x)
+#define SUN4I_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x)
+#define SUN4I_IRQ_MASK_REG(x) (0x50 + 0x4 * x)
+
+static void __iomem *sun4i_irq_base;
+static struct irq_domain *sun4i_irq_domain;
+
+static asmlinkage void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs);
+
+void sun4i_irq_ack(struct irq_data *irqd)
+{
+ unsigned int irq = irqd_to_hwirq(irqd);
+ unsigned int irq_off = irq % 32;
+ int reg = irq / 32;
+ u32 val;
+
+ val = readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
+ writel(val | (1 << irq_off),
+ sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
+}
+
+static void sun4i_irq_mask(struct irq_data *irqd)
+{
+ unsigned int irq = irqd_to_hwirq(irqd);
+ unsigned int irq_off = irq % 32;
+ int reg = irq / 32;
+ u32 val;
+
+ val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
+ writel(val & ~(1 << irq_off),
+ sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
+}
+
+static void sun4i_irq_unmask(struct irq_data *irqd)
+{
+ unsigned int irq = irqd_to_hwirq(irqd);
+ unsigned int irq_off = irq % 32;
+ int reg = irq / 32;
+ u32 val;
+
+ val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
+ writel(val | (1 << irq_off),
+ sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
+}
+
+static struct irq_chip sun4i_irq_chip = {
+ .name = "sun4i_irq",
+ .irq_ack = sun4i_irq_ack,
+ .irq_mask = sun4i_irq_mask,
+ .irq_unmask = sun4i_irq_unmask,
+};
+
+static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &sun4i_irq_chip,
+ handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops sun4i_irq_ops = {
+ .map = sun4i_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int __init sun4i_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ sun4i_irq_base = of_iomap(node, 0);
+ if (!sun4i_irq_base)
+ panic("%s: unable to map IC registers\n",
+ node->full_name);
+
+ /* Disable all interrupts */
+ writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(0));
+ writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1));
+ writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2));
+
+ /* Mask all the interrupts */
+ writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0));
+ writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1));
+ writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2));
+
+ /* Clear all the pending interrupts */
+ writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0));
+ writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(1));
+ writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(2));
+
+ /* Enable protection mode */
+ writel(0x01, sun4i_irq_base + SUN4I_IRQ_PROTECTION_REG);
+
+ /* Configure the external interrupt source type */
+ writel(0x00, sun4i_irq_base + SUN4I_IRQ_NMI_CTRL_REG);
+
+ sun4i_irq_domain = irq_domain_add_linear(node, 3 * 32,
+ &sun4i_irq_ops, NULL);
+ if (!sun4i_irq_domain)
+ panic("%s: unable to create IRQ domain\n", node->full_name);
+
+ set_handle_irq(sun4i_handle_irq);
+
+ return 0;
+}
+IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-ic", sun4i_of_init);
+
+static asmlinkage void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs)
+{
+ u32 irq, hwirq;
+
+ hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2;
+ while (hwirq != 0) {
+ irq = irq_find_mapping(sun4i_irq_domain, hwirq);
+ handle_IRQ(irq, regs);
+ hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2;
+ }
+}
+++ /dev/null
-/*
- * Allwinner A1X SoCs IRQ chip driver.
- *
- * Copyright (C) 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Benn Huang <benn@allwinnertech.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <linux/irqchip/sunxi.h>
-
-#define SUNXI_IRQ_VECTOR_REG 0x00
-#define SUNXI_IRQ_PROTECTION_REG 0x08
-#define SUNXI_IRQ_NMI_CTRL_REG 0x0c
-#define SUNXI_IRQ_PENDING_REG(x) (0x10 + 0x4 * x)
-#define SUNXI_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x)
-#define SUNXI_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x)
-#define SUNXI_IRQ_MASK_REG(x) (0x50 + 0x4 * x)
-
-static void __iomem *sunxi_irq_base;
-static struct irq_domain *sunxi_irq_domain;
-
-void sunxi_irq_ack(struct irq_data *irqd)
-{
- unsigned int irq = irqd_to_hwirq(irqd);
- unsigned int irq_off = irq % 32;
- int reg = irq / 32;
- u32 val;
-
- val = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg));
- writel(val | (1 << irq_off),
- sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg));
-}
-
-static void sunxi_irq_mask(struct irq_data *irqd)
-{
- unsigned int irq = irqd_to_hwirq(irqd);
- unsigned int irq_off = irq % 32;
- int reg = irq / 32;
- u32 val;
-
- val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
- writel(val & ~(1 << irq_off),
- sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
-}
-
-static void sunxi_irq_unmask(struct irq_data *irqd)
-{
- unsigned int irq = irqd_to_hwirq(irqd);
- unsigned int irq_off = irq % 32;
- int reg = irq / 32;
- u32 val;
-
- val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
- writel(val | (1 << irq_off),
- sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
-}
-
-static struct irq_chip sunxi_irq_chip = {
- .name = "sunxi_irq",
- .irq_ack = sunxi_irq_ack,
- .irq_mask = sunxi_irq_mask,
- .irq_unmask = sunxi_irq_unmask,
-};
-
-static int sunxi_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
-{
- irq_set_chip_and_handler(virq, &sunxi_irq_chip,
- handle_level_irq);
- set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
-}
-
-static struct irq_domain_ops sunxi_irq_ops = {
- .map = sunxi_irq_map,
- .xlate = irq_domain_xlate_onecell,
-};
-
-static int __init sunxi_of_init(struct device_node *node,
- struct device_node *parent)
-{
- sunxi_irq_base = of_iomap(node, 0);
- if (!sunxi_irq_base)
- panic("%s: unable to map IC registers\n",
- node->full_name);
-
- /* Disable all interrupts */
- writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(0));
- writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(1));
- writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(2));
-
- /* Mask all the interrupts */
- writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(0));
- writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(1));
- writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(2));
-
- /* Clear all the pending interrupts */
- writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0));
- writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(1));
- writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(2));
-
- /* Enable protection mode */
- writel(0x01, sunxi_irq_base + SUNXI_IRQ_PROTECTION_REG);
-
- /* Configure the external interrupt source type */
- writel(0x00, sunxi_irq_base + SUNXI_IRQ_NMI_CTRL_REG);
-
- sunxi_irq_domain = irq_domain_add_linear(node, 3 * 32,
- &sunxi_irq_ops, NULL);
- if (!sunxi_irq_domain)
- panic("%s: unable to create IRQ domain\n", node->full_name);
-
- return 0;
-}
-
-static struct of_device_id sunxi_irq_dt_ids[] __initconst = {
- { .compatible = "allwinner,sunxi-ic", .data = sunxi_of_init },
- { }
-};
-
-void __init sunxi_init_irq(void)
-{
- of_irq_init(sunxi_irq_dt_ids);
-}
-
-asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs)
-{
- u32 irq, hwirq;
-
- hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2;
- while (hwirq != 0) {
- irq = irq_find_mapping(sunxi_irq_domain, hwirq);
- handle_IRQ(irq, regs);
- hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2;
- }
-}
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/irqchip/arm-vic.h>
#include <asm/exception.h>
-#include <asm/mach/irq.h>
+#include <asm/irq.h>
#include "irqchip.h"
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on VIRT_TO_BUS
help
This enables HiSax support for the NetJet from Traverse
Technologies.
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on VIRT_TO_BUS
help
This enables HiSax support for the Netspider U interface ISDN card
from Traverse Technologies.
int j;
int l;
- l = strlen(msg);
+ l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg)
+ + sizeof(cmd.parm.cmsg.para) - 2);
+
if (!l) {
isdn_tty_modem_result(RESULT_ERROR, info);
return;
{
struct blk_plug plug;
+ BUG_ON(dm_bufio_in_request());
+
blk_start_plug(&plug);
dm_bufio_lock(c);
__le32 read_misses;
__le32 write_hits;
__le32 write_misses;
+
+ __le32 policy_version[CACHE_POLICY_VERSION_SIZE];
} __packed;
struct dm_cache_metadata {
bool clean_when_opened:1;
char policy_name[CACHE_POLICY_NAME_SIZE];
+ unsigned policy_version[CACHE_POLICY_VERSION_SIZE];
size_t policy_hint_size;
struct dm_cache_statistics stats;
};
memset(disk_super->uuid, 0, sizeof(disk_super->uuid));
disk_super->magic = cpu_to_le64(CACHE_SUPERBLOCK_MAGIC);
disk_super->version = cpu_to_le32(CACHE_VERSION);
- memset(disk_super->policy_name, 0, CACHE_POLICY_NAME_SIZE);
+ memset(disk_super->policy_name, 0, sizeof(disk_super->policy_name));
+ memset(disk_super->policy_version, 0, sizeof(disk_super->policy_version));
disk_super->policy_hint_size = 0;
r = dm_sm_copy_root(cmd->metadata_sm, &disk_super->metadata_space_map_root,
disk_super->metadata_block_size = cpu_to_le32(DM_CACHE_METADATA_BLOCK_SIZE >> SECTOR_SHIFT);
disk_super->data_block_size = cpu_to_le32(cmd->data_block_size);
disk_super->cache_blocks = cpu_to_le32(0);
- memset(disk_super->policy_name, 0, sizeof(disk_super->policy_name));
disk_super->read_hits = cpu_to_le32(0);
disk_super->read_misses = cpu_to_le32(0);
cmd->data_block_size = le32_to_cpu(disk_super->data_block_size);
cmd->cache_blocks = to_cblock(le32_to_cpu(disk_super->cache_blocks));
strncpy(cmd->policy_name, disk_super->policy_name, sizeof(cmd->policy_name));
+ cmd->policy_version[0] = le32_to_cpu(disk_super->policy_version[0]);
+ cmd->policy_version[1] = le32_to_cpu(disk_super->policy_version[1]);
+ cmd->policy_version[2] = le32_to_cpu(disk_super->policy_version[2]);
cmd->policy_hint_size = le32_to_cpu(disk_super->policy_hint_size);
cmd->stats.read_hits = le32_to_cpu(disk_super->read_hits);
disk_super->discard_nr_blocks = cpu_to_le64(from_dblock(cmd->discard_nr_blocks));
disk_super->cache_blocks = cpu_to_le32(from_cblock(cmd->cache_blocks));
strncpy(disk_super->policy_name, cmd->policy_name, sizeof(disk_super->policy_name));
+ disk_super->policy_version[0] = cpu_to_le32(cmd->policy_version[0]);
+ disk_super->policy_version[1] = cpu_to_le32(cmd->policy_version[1]);
+ disk_super->policy_version[2] = cpu_to_le32(cmd->policy_version[2]);
disk_super->read_hits = cpu_to_le32(cmd->stats.read_hits);
disk_super->read_misses = cpu_to_le32(cmd->stats.read_misses);
bool hints_valid;
};
+static bool policy_unchanged(struct dm_cache_metadata *cmd,
+ struct dm_cache_policy *policy)
+{
+ const char *policy_name = dm_cache_policy_get_name(policy);
+ const unsigned *policy_version = dm_cache_policy_get_version(policy);
+ size_t policy_hint_size = dm_cache_policy_get_hint_size(policy);
+
+ /*
+ * Ensure policy names match.
+ */
+ if (strncmp(cmd->policy_name, policy_name, sizeof(cmd->policy_name)))
+ return false;
+
+ /*
+ * Ensure policy major versions match.
+ */
+ if (cmd->policy_version[0] != policy_version[0])
+ return false;
+
+ /*
+ * Ensure policy hint sizes match.
+ */
+ if (cmd->policy_hint_size != policy_hint_size)
+ return false;
+
+ return true;
+}
+
static bool hints_array_initialized(struct dm_cache_metadata *cmd)
{
return cmd->hint_root && cmd->policy_hint_size;
}
static bool hints_array_available(struct dm_cache_metadata *cmd,
- const char *policy_name)
+ struct dm_cache_policy *policy)
{
- bool policy_names_match = !strncmp(cmd->policy_name, policy_name,
- sizeof(cmd->policy_name));
-
- return cmd->clean_when_opened && policy_names_match &&
+ return cmd->clean_when_opened && policy_unchanged(cmd, policy) &&
hints_array_initialized(cmd);
}
return r;
}
-static int __load_mappings(struct dm_cache_metadata *cmd, const char *policy_name,
+static int __load_mappings(struct dm_cache_metadata *cmd,
+ struct dm_cache_policy *policy,
load_mapping_fn fn, void *context)
{
struct thunk thunk;
thunk.cmd = cmd;
thunk.respect_dirty_flags = cmd->clean_when_opened;
- thunk.hints_valid = hints_array_available(cmd, policy_name);
+ thunk.hints_valid = hints_array_available(cmd, policy);
return dm_array_walk(&cmd->info, cmd->root, __load_mapping, &thunk);
}
-int dm_cache_load_mappings(struct dm_cache_metadata *cmd, const char *policy_name,
+int dm_cache_load_mappings(struct dm_cache_metadata *cmd,
+ struct dm_cache_policy *policy,
load_mapping_fn fn, void *context)
{
int r;
down_read(&cmd->root_lock);
- r = __load_mappings(cmd, policy_name, fn, context);
+ r = __load_mappings(cmd, policy, fn, context);
up_read(&cmd->root_lock);
return r;
/* nothing to be done */
return 0;
- value = pack_value(oblock, flags | (dirty ? M_DIRTY : 0));
+ value = pack_value(oblock, (flags & ~M_DIRTY) | (dirty ? M_DIRTY : 0));
__dm_bless_for_disk(&value);
r = dm_array_set_value(&cmd->info, cmd->root, from_cblock(cblock),
__le32 value;
size_t hint_size;
const char *policy_name = dm_cache_policy_get_name(policy);
+ const unsigned *policy_version = dm_cache_policy_get_version(policy);
if (!policy_name[0] ||
(strlen(policy_name) > sizeof(cmd->policy_name) - 1))
return -EINVAL;
- if (strcmp(cmd->policy_name, policy_name)) {
+ if (!policy_unchanged(cmd, policy)) {
strncpy(cmd->policy_name, policy_name, sizeof(cmd->policy_name));
+ memcpy(cmd->policy_version, policy_version, sizeof(cmd->policy_version));
hint_size = dm_cache_policy_get_hint_size(policy);
if (!hint_size)
dm_cblock_t cblock, bool dirty,
uint32_t hint, bool hint_valid);
int dm_cache_load_mappings(struct dm_cache_metadata *cmd,
- const char *policy_name,
+ struct dm_cache_policy *policy,
load_mapping_fn fn,
void *context);
/*----------------------------------------------------------------*/
#define DM_MSG_PREFIX "cache cleaner"
-#define CLEANER_VERSION "1.0.0"
/* Cache entry struct. */
struct wb_cache_entry {
static struct dm_cache_policy_type wb_policy_type = {
.name = "cleaner",
+ .version = {1, 0, 0},
.hint_size = 0,
.owner = THIS_MODULE,
.create = wb_create
if (r < 0)
DMERR("register failed %d", r);
else
- DMINFO("version " CLEANER_VERSION " loaded");
+ DMINFO("version %u.%u.%u loaded",
+ wb_policy_type.version[0],
+ wb_policy_type.version[1],
+ wb_policy_type.version[2]);
return r;
}
*/
const char *dm_cache_policy_get_name(struct dm_cache_policy *p);
+const unsigned *dm_cache_policy_get_version(struct dm_cache_policy *p);
+
size_t dm_cache_policy_get_hint_size(struct dm_cache_policy *p);
/*----------------------------------------------------------------*/
#include <linux/vmalloc.h>
#define DM_MSG_PREFIX "cache-policy-mq"
-#define MQ_VERSION "1.0.0"
static struct kmem_cache *mq_entry_cache;
static struct dm_cache_policy_type mq_policy_type = {
.name = "mq",
+ .version = {1, 0, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create
static struct dm_cache_policy_type default_policy_type = {
.name = "default",
+ .version = {1, 0, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create
r = dm_cache_policy_register(&default_policy_type);
if (!r) {
- DMINFO("version " MQ_VERSION " loaded");
+ DMINFO("version %u.%u.%u loaded",
+ mq_policy_type.version[0],
+ mq_policy_type.version[1],
+ mq_policy_type.version[2]);
return 0;
}
}
EXPORT_SYMBOL_GPL(dm_cache_policy_get_name);
+const unsigned *dm_cache_policy_get_version(struct dm_cache_policy *p)
+{
+ struct dm_cache_policy_type *t = p->private;
+
+ return t->version;
+}
+EXPORT_SYMBOL_GPL(dm_cache_policy_get_version);
+
size_t dm_cache_policy_get_hint_size(struct dm_cache_policy *p)
{
struct dm_cache_policy_type *t = p->private;
* We maintain a little register of the different policy types.
*/
#define CACHE_POLICY_NAME_SIZE 16
+#define CACHE_POLICY_VERSION_SIZE 3
struct dm_cache_policy_type {
/* For use by the register code only. */
* what gets passed on the target line to select your policy.
*/
char name[CACHE_POLICY_NAME_SIZE];
+ unsigned version[CACHE_POLICY_VERSION_SIZE];
/*
* Policies may store a hint for each each cache block.
spinlock_t lock;
struct bio_list deferred_bios;
struct bio_list deferred_flush_bios;
+ struct bio_list deferred_writethrough_bios;
struct list_head quiesced_migrations;
struct list_head completed_migrations;
struct list_head need_commit_migrations;
/*
* origin_blocks entries, discarded if set.
*/
- sector_t discard_block_size; /* a power of 2 times sectors per block */
+ uint32_t discard_block_size; /* a power of 2 times sectors per block */
dm_dblock_t discard_nr_blocks;
unsigned long *discard_bitset;
bool tick:1;
unsigned req_nr:2;
struct dm_deferred_entry *all_io_entry;
+
+ /* writethrough fields */
+ struct cache *cache;
+ dm_cblock_t cblock;
+ bio_end_io_t *saved_bi_end_io;
};
struct dm_cache_migration {
return cache->sectors_per_block_shift >= 0;
}
+static dm_block_t block_div(dm_block_t b, uint32_t n)
+{
+ do_div(b, n);
+
+ return b;
+}
+
static dm_dblock_t oblock_to_dblock(struct cache *cache, dm_oblock_t oblock)
{
- sector_t discard_blocks = cache->discard_block_size;
+ uint32_t discard_blocks = cache->discard_block_size;
dm_block_t b = from_oblock(oblock);
if (!block_size_is_power_of_two(cache))
- (void) sector_div(discard_blocks, cache->sectors_per_block);
+ discard_blocks = discard_blocks / cache->sectors_per_block;
else
discard_blocks >>= cache->sectors_per_block_shift;
- (void) sector_div(b, discard_blocks);
+ b = block_div(b, discard_blocks);
return to_dblock(b);
}
spin_unlock_irqrestore(&cache->lock, flags);
}
+static void defer_writethrough_bio(struct cache *cache, struct bio *bio)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cache->lock, flags);
+ bio_list_add(&cache->deferred_writethrough_bios, bio);
+ spin_unlock_irqrestore(&cache->lock, flags);
+
+ wake_worker(cache);
+}
+
+static void writethrough_endio(struct bio *bio, int err)
+{
+ struct per_bio_data *pb = get_per_bio_data(bio);
+ bio->bi_end_io = pb->saved_bi_end_io;
+
+ if (err) {
+ bio_endio(bio, err);
+ return;
+ }
+
+ remap_to_cache(pb->cache, bio, pb->cblock);
+
+ /*
+ * We can't issue this bio directly, since we're in interrupt
+ * context. So it get's put on a bio list for processing by the
+ * worker thread.
+ */
+ defer_writethrough_bio(pb->cache, bio);
+}
+
+/*
+ * When running in writethrough mode we need to send writes to clean blocks
+ * to both the cache and origin devices. In future we'd like to clone the
+ * bio and send them in parallel, but for now we're doing them in
+ * series as this is easier.
+ */
+static void remap_to_origin_then_cache(struct cache *cache, struct bio *bio,
+ dm_oblock_t oblock, dm_cblock_t cblock)
+{
+ struct per_bio_data *pb = get_per_bio_data(bio);
+
+ pb->cache = cache;
+ pb->cblock = cblock;
+ pb->saved_bi_end_io = bio->bi_end_io;
+ bio->bi_end_io = writethrough_endio;
+
+ remap_to_origin_clear_discard(pb->cache, bio, oblock);
+}
+
/*----------------------------------------------------------------
* Migration processing
*
dm_block_t end_block = bio->bi_sector + bio_sectors(bio);
dm_block_t b;
- (void) sector_div(end_block, cache->discard_block_size);
+ end_block = block_div(end_block, cache->discard_block_size);
for (b = start_block; b < end_block; b++)
set_discard(cache, to_dblock(b));
inc_hit_counter(cache, bio);
pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
- if (is_writethrough_io(cache, bio, lookup_result.cblock)) {
- /*
- * No need to mark anything dirty in write through mode.
- */
- pb->req_nr == 0 ?
- remap_to_cache(cache, bio, lookup_result.cblock) :
- remap_to_origin_clear_discard(cache, bio, block);
- } else
+ if (is_writethrough_io(cache, bio, lookup_result.cblock))
+ remap_to_origin_then_cache(cache, bio, block, lookup_result.cblock);
+ else
remap_to_cache_dirty(cache, bio, block, lookup_result.cblock);
issue(cache, bio);
case POLICY_MISS:
inc_miss_counter(cache, bio);
pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
-
- if (pb->req_nr != 0) {
- /*
- * This is a duplicate writethrough io that is no
- * longer needed because the block has been demoted.
- */
- bio_endio(bio, 0);
- } else {
- remap_to_origin_clear_discard(cache, bio, block);
- issue(cache, bio);
- }
+ remap_to_origin_clear_discard(cache, bio, block);
+ issue(cache, bio);
break;
case POLICY_NEW:
submit_bios ? generic_make_request(bio) : bio_io_error(bio);
}
+static void process_deferred_writethrough_bios(struct cache *cache)
+{
+ unsigned long flags;
+ struct bio_list bios;
+ struct bio *bio;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&cache->lock, flags);
+ bio_list_merge(&bios, &cache->deferred_writethrough_bios);
+ bio_list_init(&cache->deferred_writethrough_bios);
+ spin_unlock_irqrestore(&cache->lock, flags);
+
+ while ((bio = bio_list_pop(&bios)))
+ generic_make_request(bio);
+}
+
static void writeback_some_dirty_blocks(struct cache *cache)
{
int r = 0;
else
return !bio_list_empty(&cache->deferred_bios) ||
!bio_list_empty(&cache->deferred_flush_bios) ||
+ !bio_list_empty(&cache->deferred_writethrough_bios) ||
!list_empty(&cache->quiesced_migrations) ||
!list_empty(&cache->completed_migrations) ||
!list_empty(&cache->need_commit_migrations);
writeback_some_dirty_blocks(cache);
+ process_deferred_writethrough_bios(cache);
+
if (commit_if_needed(cache)) {
process_deferred_flush_bios(cache, false);
}
r = set_config_values(cache->policy, ca->policy_argc, ca->policy_argv);
- if (r)
+ if (r) {
+ *error = "Error setting cache policy's config values";
dm_cache_policy_destroy(cache->policy);
+ cache->policy = NULL;
+ }
return r;
}
#define DEFAULT_MIGRATION_THRESHOLD (2048 * 100)
-static unsigned cache_num_write_bios(struct dm_target *ti, struct bio *bio);
-
static int cache_create(struct cache_args *ca, struct cache **result)
{
int r = 0;
memcpy(&cache->features, &ca->features, sizeof(cache->features));
- if (cache->features.write_through)
- ti->num_write_bios = cache_num_write_bios;
-
cache->callbacks.congested_fn = cache_is_congested;
dm_table_add_target_callbacks(ti->table, &cache->callbacks);
/* FIXME: factor out this whole section */
origin_blocks = cache->origin_sectors = ca->origin_sectors;
- (void) sector_div(origin_blocks, ca->block_size);
+ origin_blocks = block_div(origin_blocks, ca->block_size);
cache->origin_blocks = to_oblock(origin_blocks);
cache->sectors_per_block = ca->block_size;
dm_block_t cache_size = ca->cache_sectors;
cache->sectors_per_block_shift = -1;
- (void) sector_div(cache_size, ca->block_size);
+ cache_size = block_div(cache_size, ca->block_size);
cache->cache_size = to_cblock(cache_size);
} else {
cache->sectors_per_block_shift = __ffs(ca->block_size);
spin_lock_init(&cache->lock);
bio_list_init(&cache->deferred_bios);
bio_list_init(&cache->deferred_flush_bios);
+ bio_list_init(&cache->deferred_writethrough_bios);
INIT_LIST_HEAD(&cache->quiesced_migrations);
INIT_LIST_HEAD(&cache->completed_migrations);
INIT_LIST_HEAD(&cache->need_commit_migrations);
goto out;
r = cache_create(ca, &cache);
+ if (r)
+ goto out;
r = copy_ctr_args(cache, argc - 3, (const char **)argv + 3);
if (r) {
return r;
}
-static unsigned cache_num_write_bios(struct dm_target *ti, struct bio *bio)
-{
- int r;
- struct cache *cache = ti->private;
- dm_oblock_t block = get_bio_block(cache, bio);
- dm_cblock_t cblock;
-
- r = policy_lookup(cache->policy, block, &cblock);
- if (r < 0)
- return 2; /* assume the worst */
-
- return (!r && !is_dirty(cache, cblock)) ? 2 : 1;
-}
-
static int cache_map(struct dm_target *ti, struct bio *bio)
{
struct cache *cache = ti->private;
inc_hit_counter(cache, bio);
pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
- if (is_writethrough_io(cache, bio, lookup_result.cblock)) {
- /*
- * No need to mark anything dirty in write through mode.
- */
- pb->req_nr == 0 ?
- remap_to_cache(cache, bio, lookup_result.cblock) :
- remap_to_origin_clear_discard(cache, bio, block);
- cell_defer(cache, cell, false);
- } else {
+ if (is_writethrough_io(cache, bio, lookup_result.cblock))
+ remap_to_origin_then_cache(cache, bio, block, lookup_result.cblock);
+ else
remap_to_cache_dirty(cache, bio, block, lookup_result.cblock);
- cell_defer(cache, cell, false);
- }
+
+ cell_defer(cache, cell, false);
break;
case POLICY_MISS:
}
if (!cache->loaded_mappings) {
- r = dm_cache_load_mappings(cache->cmd,
- dm_cache_policy_get_name(cache->policy),
+ r = dm_cache_load_mappings(cache->cmd, cache->policy,
load_mapping, cache);
if (r) {
DMERR("could not load cache mappings");
static struct target_type cache_target = {
.name = "cache",
- .version = {1, 0, 0},
+ .version = {1, 1, 0},
.module = THIS_MODULE,
.ctr = cache_ctr,
.dtr = cache_dtr,
return q && blk_queue_discard(q);
}
+static bool is_factor(sector_t block_size, uint32_t n)
+{
+ return !sector_div(block_size, n);
+}
+
/*
* If discard_passdown was enabled verify that the data device
* supports discards. Disable discard_passdown if not.
else if (data_limits->discard_granularity > block_size)
reason = "discard granularity larger than a block";
- else if (block_size & (data_limits->discard_granularity - 1))
+ else if (!is_factor(block_size, data_limits->discard_granularity))
reason = "discard granularity not a factor of block size";
if (reason) {
.name = "thin-pool",
.features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE |
DM_TARGET_IMMUTABLE,
- .version = {1, 6, 1},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = pool_ctr,
.dtr = pool_dtr,
static struct target_type thin_target = {
.name = "thin",
- .version = {1, 7, 1},
+ .version = {1, 8, 0},
.module = THIS_MODULE,
.ctr = thin_ctr,
.dtr = thin_dtr,
*/
};
+struct dm_verity_prefetch_work {
+ struct work_struct work;
+ struct dm_verity *v;
+ sector_t block;
+ unsigned n_blocks;
+};
+
static struct shash_desc *io_hash_desc(struct dm_verity *v, struct dm_verity_io *io)
{
return (struct shash_desc *)(io + 1);
* The root buffer is not prefetched, it is assumed that it will be cached
* all the time.
*/
-static void verity_prefetch_io(struct dm_verity *v, struct dm_verity_io *io)
+static void verity_prefetch_io(struct work_struct *work)
{
+ struct dm_verity_prefetch_work *pw =
+ container_of(work, struct dm_verity_prefetch_work, work);
+ struct dm_verity *v = pw->v;
int i;
for (i = v->levels - 2; i >= 0; i--) {
sector_t hash_block_start;
sector_t hash_block_end;
- verity_hash_at_level(v, io->block, i, &hash_block_start, NULL);
- verity_hash_at_level(v, io->block + io->n_blocks - 1, i, &hash_block_end, NULL);
+ verity_hash_at_level(v, pw->block, i, &hash_block_start, NULL);
+ verity_hash_at_level(v, pw->block + pw->n_blocks - 1, i, &hash_block_end, NULL);
if (!i) {
unsigned cluster = ACCESS_ONCE(dm_verity_prefetch_cluster);
dm_bufio_prefetch(v->bufio, hash_block_start,
hash_block_end - hash_block_start + 1);
}
+
+ kfree(pw);
+}
+
+static void verity_submit_prefetch(struct dm_verity *v, struct dm_verity_io *io)
+{
+ struct dm_verity_prefetch_work *pw;
+
+ pw = kmalloc(sizeof(struct dm_verity_prefetch_work),
+ GFP_NOIO | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN);
+
+ if (!pw)
+ return;
+
+ INIT_WORK(&pw->work, verity_prefetch_io);
+ pw->v = v;
+ pw->block = io->block;
+ pw->n_blocks = io->n_blocks;
+ queue_work(v->verify_wq, &pw->work);
}
/*
memcpy(io->io_vec, bio_iovec(bio),
io->io_vec_size * sizeof(struct bio_vec));
- verity_prefetch_io(v, io);
+ verity_submit_prefetch(v, io);
generic_make_request(bio);
static struct target_type verity_target = {
.name = "verity",
- .version = {1, 1, 1},
+ .version = {1, 2, 0},
.module = THIS_MODULE,
.ctr = verity_ctr,
.dtr = verity_dtr,
removed++;
}
}
- if (removed)
- sysfs_notify(&mddev->kobj, NULL,
- "degraded");
-
+ if (removed && mddev->kobj.sd)
+ sysfs_notify(&mddev->kobj, NULL, "degraded");
rdev_for_each(rdev, mddev) {
if (rdev->raid_disk >= 0 &&
static inline int sysfs_link_rdev(struct mddev *mddev, struct md_rdev *rdev)
{
char nm[20];
- if (!test_bit(Replacement, &rdev->flags)) {
+ if (!test_bit(Replacement, &rdev->flags) && mddev->kobj.sd) {
sprintf(nm, "rd%d", rdev->raid_disk);
return sysfs_create_link(&mddev->kobj, &rdev->kobj, nm);
} else
static inline void sysfs_unlink_rdev(struct mddev *mddev, struct md_rdev *rdev)
{
char nm[20];
- if (!test_bit(Replacement, &rdev->flags)) {
+ if (!test_bit(Replacement, &rdev->flags) && mddev->kobj.sd) {
sprintf(nm, "rd%d", rdev->raid_disk);
sysfs_remove_link(&mddev->kobj, nm);
}
struct btree_node *n;
};
-static struct dm_btree_value_type le64_type = {
- .context = NULL,
- .size = sizeof(__le64),
- .inc = NULL,
- .dec = NULL,
- .equal = NULL
-};
-
-static int init_child(struct dm_btree_info *info, struct btree_node *parent,
+static int init_child(struct dm_btree_info *info, struct dm_btree_value_type *vt,
+ struct btree_node *parent,
unsigned index, struct child *result)
{
int r, inc;
result->n = dm_block_data(result->block);
if (inc)
- inc_children(info->tm, result->n, &le64_type);
+ inc_children(info->tm, result->n, vt);
*((__le64 *) value_ptr(parent, index)) =
cpu_to_le64(dm_block_location(result->block));
}
static int rebalance2(struct shadow_spine *s, struct dm_btree_info *info,
- unsigned left_index)
+ struct dm_btree_value_type *vt, unsigned left_index)
{
int r;
struct btree_node *parent;
parent = dm_block_data(shadow_current(s));
- r = init_child(info, parent, left_index, &left);
+ r = init_child(info, vt, parent, left_index, &left);
if (r)
return r;
- r = init_child(info, parent, left_index + 1, &right);
+ r = init_child(info, vt, parent, left_index + 1, &right);
if (r) {
exit_child(info, &left);
return r;
}
static int rebalance3(struct shadow_spine *s, struct dm_btree_info *info,
- unsigned left_index)
+ struct dm_btree_value_type *vt, unsigned left_index)
{
int r;
struct btree_node *parent = dm_block_data(shadow_current(s));
/*
* FIXME: fill out an array?
*/
- r = init_child(info, parent, left_index, &left);
+ r = init_child(info, vt, parent, left_index, &left);
if (r)
return r;
- r = init_child(info, parent, left_index + 1, ¢er);
+ r = init_child(info, vt, parent, left_index + 1, ¢er);
if (r) {
exit_child(info, &left);
return r;
}
- r = init_child(info, parent, left_index + 2, &right);
+ r = init_child(info, vt, parent, left_index + 2, &right);
if (r) {
exit_child(info, &left);
exit_child(info, ¢er);
}
static int rebalance_children(struct shadow_spine *s,
- struct dm_btree_info *info, uint64_t key)
+ struct dm_btree_info *info,
+ struct dm_btree_value_type *vt, uint64_t key)
{
int i, r, has_left_sibling, has_right_sibling;
uint32_t child_entries;
has_right_sibling = i < (le32_to_cpu(n->header.nr_entries) - 1);
if (!has_left_sibling)
- r = rebalance2(s, info, i);
+ r = rebalance2(s, info, vt, i);
else if (!has_right_sibling)
- r = rebalance2(s, info, i - 1);
+ r = rebalance2(s, info, vt, i - 1);
else
- r = rebalance3(s, info, i - 1);
+ r = rebalance3(s, info, vt, i - 1);
return r;
}
if (le32_to_cpu(n->header.flags) & LEAF_NODE)
return do_leaf(n, key, index);
- r = rebalance_children(s, info, key);
+ r = rebalance_children(s, info, vt, key);
if (r)
break;
return r;
}
+static struct dm_btree_value_type le64_type = {
+ .context = NULL,
+ .size = sizeof(__le64),
+ .inc = NULL,
+ .dec = NULL,
+ .equal = NULL
+};
+
int dm_btree_remove(struct dm_btree_info *info, dm_block_t root,
uint64_t *keys, dm_block_t *new_root)
{
bi->bi_next = NULL;
if (rrdev)
set_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags);
- trace_block_bio_remap(bdev_get_queue(bi->bi_bdev),
- bi, disk_devt(conf->mddev->gendisk),
- sh->dev[i].sector);
+
+ if (conf->mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(bi->bi_bdev),
+ bi, disk_devt(conf->mddev->gendisk),
+ sh->dev[i].sector);
generic_make_request(bi);
}
if (rrdev) {
rbi->bi_io_vec[0].bv_offset = 0;
rbi->bi_size = STRIPE_SIZE;
rbi->bi_next = NULL;
- trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev),
- rbi, disk_devt(conf->mddev->gendisk),
- sh->dev[i].sector);
+ if (conf->mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev),
+ rbi, disk_devt(conf->mddev->gendisk),
+ sh->dev[i].sector);
generic_make_request(rbi);
}
if (!rdev && !rrdev) {
int level = conf->level;
if (rcw) {
- /* if we are not expanding this is a proper write request, and
- * there will be bios with new data to be drained into the
- * stripe cache
- */
- if (!expand) {
- sh->reconstruct_state = reconstruct_state_drain_run;
- set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- } else
- sh->reconstruct_state = reconstruct_state_run;
-
- set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
s->locked++;
}
}
+ /* if we are not expanding this is a proper write request, and
+ * there will be bios with new data to be drained into the
+ * stripe cache
+ */
+ if (!expand) {
+ if (!s->locked)
+ /* False alarm, nothing to do */
+ return;
+ sh->reconstruct_state = reconstruct_state_drain_run;
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ } else
+ sh->reconstruct_state = reconstruct_state_run;
+
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
+
if (s->locked + conf->max_degraded == disks)
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
atomic_inc(&conf->pending_full_writes);
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
- sh->reconstruct_state = reconstruct_state_prexor_drain_run;
- set_bit(STRIPE_OP_PREXOR, &s->ops_request);
- set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
-
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (i == pd_idx)
s->locked++;
}
}
+ if (!s->locked)
+ /* False alarm - nothing to do */
+ return;
+ sh->reconstruct_state = reconstruct_state_prexor_drain_run;
+ set_bit(STRIPE_OP_PREXOR, &s->ops_request);
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
}
/* keep the parity disk(s) locked while asynchronous operations
int i;
clear_bit(STRIPE_SYNCING, &sh->state);
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
+ wake_up(&conf->wait_for_overlap);
s->syncing = 0;
s->replacing = 0;
/* There is nothing more to do for sync/check/repair.
{
int i;
struct r5dev *dev;
+ int discard_pending = 0;
for (i = disks; i--; )
if (sh->dev[i].written) {
STRIPE_SECTORS,
!test_bit(STRIPE_DEGRADED, &sh->state),
0);
- }
- } else if (test_bit(R5_Discard, &sh->dev[i].flags))
- clear_bit(R5_Discard, &sh->dev[i].flags);
+ } else if (test_bit(R5_Discard, &dev->flags))
+ discard_pending = 1;
+ }
+ if (!discard_pending &&
+ test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
+ clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+ if (sh->qd_idx >= 0) {
+ clear_bit(R5_Discard, &sh->dev[sh->qd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags);
+ }
+ /* now that discard is done we can proceed with any sync */
+ clear_bit(STRIPE_DISCARD, &sh->state);
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ }
if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
if (atomic_dec_and_test(&conf->pending_full_writes))
set_bit(STRIPE_HANDLE, &sh->state);
if (rmw < rcw && rmw > 0) {
/* prefer read-modify-write, but need to get some data */
- blk_add_trace_msg(conf->mddev->queue, "raid5 rmw %llu %d",
- (unsigned long long)sh->sector, rmw);
+ if (conf->mddev->queue)
+ blk_add_trace_msg(conf->mddev->queue,
+ "raid5 rmw %llu %d",
+ (unsigned long long)sh->sector, rmw);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if ((dev->towrite || i == sh->pd_idx) &&
}
}
}
- if (rcw)
+ if (rcw && conf->mddev->queue)
blk_add_trace_msg(conf->mddev->queue, "raid5 rcw %llu %d %d %d",
(unsigned long long)sh->sector,
rcw, qread, test_bit(STRIPE_DELAYED, &sh->state));
return;
}
- if (test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
- set_bit(STRIPE_SYNCING, &sh->state);
- clear_bit(STRIPE_INSYNC, &sh->state);
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+ spin_lock(&sh->stripe_lock);
+ /* Cannot process 'sync' concurrently with 'discard' */
+ if (!test_bit(STRIPE_DISCARD, &sh->state) &&
+ test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+ set_bit(STRIPE_SYNCING, &sh->state);
+ clear_bit(STRIPE_INSYNC, &sh->state);
+ }
+ spin_unlock(&sh->stripe_lock);
}
clear_bit(STRIPE_DELAYED, &sh->state);
test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
clear_bit(STRIPE_SYNCING, &sh->state);
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
+ wake_up(&conf->wait_for_overlap);
}
/* If the failed drives are just a ReadError, then we might need
atomic_inc(&conf->active_aligned_reads);
spin_unlock_irq(&conf->device_lock);
- trace_block_bio_remap(bdev_get_queue(align_bi->bi_bdev),
- align_bi, disk_devt(mddev->gendisk),
- raid_bio->bi_sector);
+ if (mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(align_bi->bi_bdev),
+ align_bi, disk_devt(mddev->gendisk),
+ raid_bio->bi_sector);
generic_make_request(align_bi);
return 1;
} else {
}
spin_unlock_irq(&conf->device_lock);
}
- trace_block_unplug(mddev->queue, cnt, !from_schedule);
+ if (mddev->queue)
+ trace_block_unplug(mddev->queue, cnt, !from_schedule);
kfree(cb);
}
sh = get_active_stripe(conf, logical_sector, 0, 0, 0);
prepare_to_wait(&conf->wait_for_overlap, &w,
TASK_UNINTERRUPTIBLE);
+ set_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
+ if (test_bit(STRIPE_SYNCING, &sh->state)) {
+ release_stripe(sh);
+ schedule();
+ goto again;
+ }
+ clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
spin_lock_irq(&sh->stripe_lock);
for (d = 0; d < conf->raid_disks; d++) {
if (d == sh->pd_idx || d == sh->qd_idx)
goto again;
}
}
+ set_bit(STRIPE_DISCARD, &sh->state);
finish_wait(&conf->wait_for_overlap, &w);
for (d = 0; d < conf->raid_disks; d++) {
if (d == sh->pd_idx || d == sh->qd_idx)
struct stripe_operations {
int target, target2;
enum sum_check_flags zero_sum_result;
- #ifdef CONFIG_MULTICORE_RAID456
- unsigned long request;
- wait_queue_head_t wait_for_ops;
- #endif
} ops;
struct r5dev {
/* rreq and rvec are used for the replacement device when
STRIPE_COMPUTE_RUN,
STRIPE_OPS_REQ_PENDING,
STRIPE_ON_UNPLUG_LIST,
+ STRIPE_DISCARD,
};
/*
if (enable) {
if (is_code(code, M5MOLS_RESTYPE_MONITOR))
ret = m5mols_start_monitor(info);
- if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
+ else if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
ret = m5mols_start_capture(info);
else
ret = -EINVAL;
vdelay start of active video in 2 * field lines relative to
trailing edge of /VRESET pulse (VDELAY register).
sheight height of active video in 2 * field lines.
+ extraheight Added to sheight for cropcap.bounds.height only
videostart0 ITU-R frame line number of the line corresponding
to vdelay in the first field. */
#define CROPCAP(minhdelayx1, hdelayx1, swidth, totalwidth, sqwidth, \
- vdelay, sheight, videostart0) \
+ vdelay, sheight, extraheight, videostart0) \
.cropcap.bounds.left = minhdelayx1, \
/* * 2 because vertically we count field lines times two, */ \
/* e.g. 23 * 2 to 23 * 2 + 576 in PAL-BGHI defrect. */ \
.cropcap.bounds.top = (videostart0) * 2 - (vdelay) + MIN_VDELAY, \
/* 4 is a safety margin at the end of the line. */ \
.cropcap.bounds.width = (totalwidth) - (minhdelayx1) - 4, \
- .cropcap.bounds.height = (sheight) + (vdelay) - MIN_VDELAY, \
+ .cropcap.bounds.height = (sheight) + (extraheight) + (vdelay) - \
+ MIN_VDELAY, \
.cropcap.defrect.left = hdelayx1, \
.cropcap.defrect.top = (videostart0) * 2, \
.cropcap.defrect.width = swidth, \
/* totalwidth */ 1135,
/* sqwidth */ 944,
/* vdelay */ 0x20,
- /* bt878 (and bt848?) can capture another
- line below active video. */
- /* sheight */ (576 + 2) + 0x20 - 2,
+ /* sheight */ 576,
+ /* bt878 (and bt848?) can capture another
+ line below active video. */
+ /* extraheight */ 2,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_SECAM,
/* sqwidth */ 944,
/* vdelay */ 0x20,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_Nc,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_M,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_N,
/* sqwidth */ 944,
/* vdelay */ 0x20,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_NTSC_M_JP,
/* sqwidth */ 780,
/* vdelay */ 0x16,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
/* that one hopefully works with the strange timing
/* sqwidth */ 944,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
}
};
static int gsc_m2m_resume(struct gsc_dev *gsc)
{
+ struct gsc_ctx *ctx;
unsigned long flags;
spin_lock_irqsave(&gsc->slock, flags);
/* Clear for full H/W setup in first run after resume */
+ ctx = gsc->m2m.ctx;
gsc->m2m.ctx = NULL;
spin_unlock_irqrestore(&gsc->slock, flags);
if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state))
- gsc_m2m_job_finish(gsc->m2m.ctx,
- VB2_BUF_STATE_ERROR);
+ gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+
return 0;
}
/* Do not resume if the device was idle before system suspend */
spin_lock_irqsave(&gsc->slock, flags);
if (!test_and_clear_bit(ST_SUSPEND, &gsc->state) ||
- !gsc_m2m_active(gsc)) {
+ !gsc_m2m_opened(gsc)) {
spin_unlock_irqrestore(&gsc->slock, flags);
return 0;
}
static int fimc_m2m_resume(struct fimc_dev *fimc)
{
+ struct fimc_ctx *ctx;
unsigned long flags;
spin_lock_irqsave(&fimc->slock, flags);
/* Clear for full H/W setup in first run after resume */
+ ctx = fimc->m2m.ctx;
fimc->m2m.ctx = NULL;
spin_unlock_irqrestore(&fimc->slock, flags);
if (test_and_clear_bit(ST_M2M_SUSPENDED, &fimc->state))
- fimc_m2m_job_finish(fimc->m2m.ctx,
- VB2_BUF_STATE_ERROR);
+ fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+
return 0;
}
void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
{
enum v4l2_mbus_pixelcode pixelcode = dev->fmt->mbus_code;
- unsigned int i = ARRAY_SIZE(src_pixfmt_map);
+ int i = ARRAY_SIZE(src_pixfmt_map);
u32 cfg;
- while (i-- >= 0) {
+ while (--i >= 0) {
if (src_pixfmt_map[i][0] == pixelcode)
break;
}
{ V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
};
u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
- unsigned int i = ARRAY_SIZE(pixcode);
+ int i = ARRAY_SIZE(pixcode);
- while (i-- >= 0)
+ while (--i >= 0)
if (pixcode[i][0] == dev->fmt->mbus_code)
break;
cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
.id = V4L2_CTRL_CLASS_USER | 0x1001,
.type = V4L2_CTRL_TYPE_BOOLEAN,
.name = "Test Pattern 640x480",
+ .step = 1,
};
static int fimc_lite_create_capture_subdev(struct fimc_lite *fimc)
struct fimc_pipeline *pipeline;
struct v4l2_subdev *sd;
struct mutex *lock;
- int ret = 0;
+ int i, ret = 0;
int ref_count;
if (media_entity_type(sink->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
return 0;
}
+ mutex_lock(lock);
+ ref_count = fimc ? fimc->vid_cap.refcnt : fimc_lite->ref_count;
+
if (!(flags & MEDIA_LNK_FL_ENABLED)) {
- int i;
- mutex_lock(lock);
- ret = __fimc_pipeline_close(pipeline);
+ if (ref_count > 0) {
+ ret = __fimc_pipeline_close(pipeline);
+ if (!ret && fimc)
+ fimc_ctrls_delete(fimc->vid_cap.ctx);
+ }
for (i = 0; i < IDX_MAX; i++)
pipeline->subdevs[i] = NULL;
- if (fimc)
- fimc_ctrls_delete(fimc->vid_cap.ctx);
- mutex_unlock(lock);
- return ret;
+ } else if (ref_count > 0) {
+ /*
+ * Link activation. Enable power of pipeline elements only if
+ * the pipeline is already in use, i.e. its video node is open.
+ * Recreate the controls destroyed during the link deactivation.
+ */
+ ret = __fimc_pipeline_open(pipeline,
+ source->entity, true);
+ if (!ret && fimc)
+ ret = fimc_capture_ctrls_create(fimc);
}
- /*
- * Link activation. Enable power of pipeline elements only if the
- * pipeline is already in use, i.e. its video node is opened.
- * Recreate the controls destroyed during the link deactivation.
- */
- mutex_lock(lock);
-
- ref_count = fimc ? fimc->vid_cap.refcnt : fimc_lite->ref_count;
- if (ref_count > 0)
- ret = __fimc_pipeline_open(pipeline, source->entity, true);
- if (!ret && fimc)
- ret = fimc_capture_ctrls_create(fimc);
mutex_unlock(lock);
return ret ? -EPIPE : ret;
unsigned int frame_type;
dspl_y_addr = s5p_mfc_hw_call(dev->mfc_ops, get_dspl_y_adr, dev);
- frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev);
+ frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_disp_frame_type, ctx);
/* If frame is same as previous then skip and do not dequeue */
if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) {
.minimum = 0,
.maximum = 1,
.default_value = 0,
+ .step = 1,
.menu_skip_mask = 0,
},
{
config IR_RX51
tristate "Nokia N900 IR transmitter diode"
- depends on OMAP_DM_TIMER && LIRC && !ARCH_MULTIPLATFORM
+ depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
---help---
Say Y or M here if you want to enable support for the IR
transmitter diode built in the Nokia N900 (RX51) device.
videodev-objs += v4l2-compat-ioctl32.o
endif
-obj-$(CONFIG_VIDEO_DEV) += videodev.o
+obj-$(CONFIG_VIDEO_V4L2) += videodev.o
obj-$(CONFIG_VIDEO_V4L2_INT_DEVICE) += v4l2-int-device.o
obj-$(CONFIG_VIDEO_V4L2) += v4l2-common.o
MC_INTMASK,
};
+#ifdef CONFIG_PM
static int tegra30_mc_suspend(struct device *dev)
{
int i;
mc_readl(mc, MC_TIMING_CONTROL);
return 0;
}
+#endif
static UNIVERSAL_DEV_PM_OPS(tegra30_mc_pm,
tegra30_mc_suspend,
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ select POWER_SUPPLY
select MFD_CORE
select IRQ_DOMAIN
help
static int ab8500_gpadc_runtime_resume(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+ int ret;
- regulator_enable(gpadc->regu);
- return 0;
+ ret = regulator_enable(gpadc->regu);
+ if (ret)
+ dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
+ return ret;
}
static int ab8500_gpadc_runtime_idle(struct device *dev)
}
/* VTVout LDO used to power up ab8500-GPADC */
- gpadc->regu = regulator_get(&pdev->dev, "vddadc");
+ gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
if (IS_ERR(gpadc->regu)) {
ret = PTR_ERR(gpadc->regu);
dev_err(gpadc->dev, "failed to get vtvout LDO\n");
platform_set_drvdata(pdev, gpadc);
- regulator_enable(gpadc->regu);
+ ret = regulator_enable(gpadc->regu);
+ if (ret) {
+ dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
+ goto fail_enable;
+ }
pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
pm_runtime_use_autosuspend(gpadc->dev);
list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dev_dbg(gpadc->dev, "probe success\n");
return 0;
+
+fail_enable:
fail_irq:
free_irq(gpadc->irq, gpadc);
fail:
switch (omap->usbhs_rev) {
case OMAP_USBHS_REV1:
- omap_usbhs_rev1_hostconfig(omap, reg);
+ reg = omap_usbhs_rev1_hostconfig(omap, reg);
break;
case OMAP_USBHS_REV2:
- omap_usbhs_rev2_hostconfig(omap, reg);
+ reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
default: /* newer revisions */
- omap_usbhs_rev2_hostconfig(omap, reg);
+ reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
}
PALMAS_INT1_MASK),
};
-static void palmas_dt_to_pdata(struct device_node *node,
+static int palmas_set_pdata_irq_flag(struct i2c_client *i2c,
struct palmas_platform_data *pdata)
{
+ struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
+ return -EINVAL;
+ }
+
+ pdata->irq_flags = irqd_get_trigger_type(irq_data);
+ dev_info(&i2c->dev, "Irq flag is 0x%08x\n", pdata->irq_flags);
+ return 0;
+}
+
+static void palmas_dt_to_pdata(struct i2c_client *i2c,
+ struct palmas_platform_data *pdata)
+{
+ struct device_node *node = i2c->dev.of_node;
int ret;
u32 prop;
pdata->power_ctrl = PALMAS_POWER_CTRL_NSLEEP_MASK |
PALMAS_POWER_CTRL_ENABLE1_MASK |
PALMAS_POWER_CTRL_ENABLE2_MASK;
+ if (i2c->irq)
+ palmas_set_pdata_irq_flag(i2c, pdata);
}
static int palmas_i2c_probe(struct i2c_client *i2c,
if (!pdata)
return -ENOMEM;
- palmas_dt_to_pdata(node, pdata);
+ palmas_dt_to_pdata(i2c, pdata);
}
if (!pdata)
}
}
+ /* Change interrupt line output polarity */
+ if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH)
+ reg = PALMAS_POLARITY_CTRL_INT_POLARITY;
+ else
+ reg = 0;
+ ret = palmas_update_bits(palmas, PALMAS_PU_PD_OD_BASE,
+ PALMAS_POLARITY_CTRL, PALMAS_POLARITY_CTRL_INT_POLARITY,
+ reg);
+ if (ret < 0) {
+ dev_err(palmas->dev, "POLARITY_CTRL updat failed: %d\n", ret);
+ goto err;
+ }
+
/* Change IRQ into clear on read mode for efficiency */
slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
regmap_write(palmas->regmap[slave], addr, reg);
ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW, 0, &palmas_irq_chip,
+ IRQF_ONESHOT | pdata->irq_flags, 0, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
goto err;
void tps65912_device_exit(struct tps65912 *tps65912)
{
mfd_remove_devices(tps65912->dev);
+ tps65912_irq_exit(tps65912);
kfree(tps65912);
}
* Disable the resource.
* The function returns with error or the content of the register
*/
-int twl4030_audio_disable_resource(unsigned id)
+int twl4030_audio_disable_resource(enum twl4030_audio_res id)
{
struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev);
int val;
static struct platform_driver twl4030_madc_driver = {
.probe = twl4030_madc_probe,
- .remove = __exit_p(twl4030_madc_remove),
+ .remove = twl4030_madc_remove,
.driver = {
.name = "twl4030_madc",
.owner = THIS_MODULE,
mei_hcsr_set(hw, hcsr);
}
+/**
+ * mei_me_hw_reset_release - release device from the reset
+ *
+ * @dev: the device structure
+ */
+static void mei_me_hw_reset_release(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 hcsr = mei_hcsr_read(hw);
+
+ hcsr |= H_IG;
+ hcsr &= ~H_RST;
+ mei_hcsr_set(hw, hcsr);
+}
/**
* mei_me_hw_reset - resets fw via mei csr register.
*
if (intr_enable)
hcsr |= H_IE;
else
- hcsr &= ~H_IE;
-
- mei_hcsr_set(hw, hcsr);
-
- hcsr = mei_hcsr_read(hw) | H_IG;
- hcsr &= ~H_RST;
+ hcsr |= ~H_IE;
mei_hcsr_set(hw, hcsr);
- hcsr = mei_hcsr_read(hw);
+ if (dev->dev_state == MEI_DEV_POWER_DOWN)
+ mei_me_hw_reset_release(dev);
- dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", hcsr);
+ dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", mei_hcsr_read(hw));
}
/**
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
} else {
- dev_dbg(&dev->pdev->dev, "FW not ready.\n");
+ dev_dbg(&dev->pdev->dev, "Reset Completed.\n");
+ mei_me_hw_reset_release(dev);
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
}
mei_cl_all_write_clear(dev);
}
+void mei_stop(struct mei_device *dev)
+{
+ dev_dbg(&dev->pdev->dev, "stopping the device.\n");
+
+ mutex_lock(&dev->device_lock);
+
+ cancel_delayed_work(&dev->timer_work);
+
+ mei_wd_stop(dev);
+
+ dev->dev_state = MEI_DEV_POWER_DOWN;
+ mei_reset(dev, 0);
+
+ mutex_unlock(&dev->device_lock);
+
+ flush_scheduled_work();
+}
+
void mei_device_init(struct mei_device *dev);
void mei_reset(struct mei_device *dev, int interrupts);
int mei_hw_init(struct mei_device *dev);
+void mei_stop(struct mei_device *dev);
/*
* MEI interrupt functions prototype
hw = to_me_hw(dev);
- mutex_lock(&dev->device_lock);
-
- cancel_delayed_work(&dev->timer_work);
- mei_wd_stop(dev);
+ dev_err(&pdev->dev, "stop\n");
+ mei_stop(dev);
mei_pdev = NULL;
- if (dev->iamthif_cl.state == MEI_FILE_CONNECTED) {
- dev->iamthif_cl.state = MEI_FILE_DISCONNECTING;
- mei_cl_disconnect(&dev->iamthif_cl);
- }
- if (dev->wd_cl.state == MEI_FILE_CONNECTED) {
- dev->wd_cl.state = MEI_FILE_DISCONNECTING;
- mei_cl_disconnect(&dev->wd_cl);
- }
-
- /* Unregistering watchdog device */
mei_watchdog_unregister(dev);
- /* remove entry if already in list */
- dev_dbg(&pdev->dev, "list del iamthif and wd file list.\n");
-
- if (dev->open_handle_count > 0)
- dev->open_handle_count--;
- mei_cl_unlink(&dev->wd_cl);
-
- if (dev->open_handle_count > 0)
- dev->open_handle_count--;
- mei_cl_unlink(&dev->iamthif_cl);
-
- dev->iamthif_current_cb = NULL;
- dev->me_clients_num = 0;
-
- mutex_unlock(&dev->device_lock);
-
- flush_scheduled_work();
-
/* disable interrupts */
mei_disable_interrupts(dev);
{
struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev = pci_get_drvdata(pdev);
- int err;
if (!dev)
return -ENODEV;
- mutex_lock(&dev->device_lock);
- cancel_delayed_work(&dev->timer_work);
+ dev_err(&pdev->dev, "suspend\n");
- /* Stop watchdog if exists */
- err = mei_wd_stop(dev);
- /* Set new mei state */
- if (dev->dev_state == MEI_DEV_ENABLED ||
- dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) {
- dev->dev_state = MEI_DEV_POWER_DOWN;
- mei_reset(dev, 0);
- }
- mutex_unlock(&dev->device_lock);
+ mei_stop(dev);
+
+ mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
pci_disable_msi(pdev);
- return err;
+ return 0;
}
static int mei_pci_resume(struct device *device)
struct delayed_datagram_info {
struct datagram_entry *entry;
- struct vmci_datagram msg;
struct work_struct work;
bool in_dg_host_queue;
+ /* msg and msg_payload must be together. */
+ struct vmci_datagram msg;
+ u8 msg_payload[];
};
/* Number of in-flight host->host datagrams */
#include <asm/sizes.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
-#include <mach/msm_iomap.h>
#include <mach/dma.h>
#include <mach/clk.h>
#include <mach/dma.h>
-#include <mach/regs-sdi.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
#define DRIVER_NAME "s3c-mci"
+#define S3C2410_SDICON (0x00)
+#define S3C2410_SDIPRE (0x04)
+#define S3C2410_SDICMDARG (0x08)
+#define S3C2410_SDICMDCON (0x0C)
+#define S3C2410_SDICMDSTAT (0x10)
+#define S3C2410_SDIRSP0 (0x14)
+#define S3C2410_SDIRSP1 (0x18)
+#define S3C2410_SDIRSP2 (0x1C)
+#define S3C2410_SDIRSP3 (0x20)
+#define S3C2410_SDITIMER (0x24)
+#define S3C2410_SDIBSIZE (0x28)
+#define S3C2410_SDIDCON (0x2C)
+#define S3C2410_SDIDCNT (0x30)
+#define S3C2410_SDIDSTA (0x34)
+#define S3C2410_SDIFSTA (0x38)
+
+#define S3C2410_SDIDATA (0x3C)
+#define S3C2410_SDIIMSK (0x40)
+
+#define S3C2440_SDIDATA (0x40)
+#define S3C2440_SDIIMSK (0x3C)
+
+#define S3C2440_SDICON_SDRESET (1 << 8)
+#define S3C2410_SDICON_SDIOIRQ (1 << 3)
+#define S3C2410_SDICON_FIFORESET (1 << 1)
+#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
+
+#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
+#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
+#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
+#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
+
+#define S3C2440_SDIDCON_DS_WORD (2 << 22)
+#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
+#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
+#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
+#define S3C2410_SDIDCON_DMAEN (1 << 15)
+#define S3C2410_SDIDCON_STOP (1 << 14)
+#define S3C2440_SDIDCON_DATSTART (1 << 14)
+
+#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
+
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
+#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
+#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
+#define S3C2410_SDIDSTA_TXDATAON (1 << 1)
+#define S3C2410_SDIDSTA_RXDATAON (1 << 0)
+
+#define S3C2440_SDIFSTA_FIFORESET (1 << 16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14)
+#define S3C2410_SDIFSTA_TFDET (1 << 13)
+#define S3C2410_SDIFSTA_RFDET (1 << 12)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17)
+#define S3C2410_SDIIMSK_CMDSENT (1 << 16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15)
+#define S3C2410_SDIIMSK_RESPONSEND (1 << 14)
+#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10)
+#define S3C2410_SDIIMSK_DATACRC (1 << 9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8)
+#define S3C2410_SDIIMSK_DATAFINISH (1 << 7)
+#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0)
+
enum dbg_channels {
dbg_err = (1 << 0),
dbg_debug = (1 << 1),
/* 10 parts were found on sflash on Netgear WNDR4500 */
#define BCM47XXPART_MAX_PARTS 12
+/*
+ * Amount of bytes we read when analyzing each block of flash memory.
+ * Set it big enough to allow detecting partition and reading important data.
+ */
+#define BCM47XXPART_BYTES_TO_READ 0x404
+
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
#define POT_MAGIC1 0x54544f50 /* POTT */
struct trx_header *trx;
int trx_part = -1;
int last_trx_part = -1;
- int max_bytes_to_read = 0x8004;
+ int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
if (blocksize <= 0x10000)
blocksize = 0x10000;
- if (blocksize == 0x20000)
- max_bytes_to_read = 0x18004;
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
GFP_KERNEL);
- buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
+ buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;
}
/* Read beginning of the block */
- if (mtd_read(master, offset, max_bytes_to_read,
+ if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
&bytes_read, (uint8_t *)buf) < 0) {
pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
offset);
continue;
}
- /* Standard NVRAM */
- if (buf[0x000 / 4] == NVRAM_HEADER ||
- buf[0x1000 / 4] == NVRAM_HEADER ||
- buf[0x8000 / 4] == NVRAM_HEADER ||
- (blocksize == 0x20000 && (
- buf[0x10000 / 4] == NVRAM_HEADER ||
- buf[0x11000 / 4] == NVRAM_HEADER ||
- buf[0x18000 / 4] == NVRAM_HEADER))) {
- bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- offset, 0);
- offset = rounddown(offset, blocksize);
- continue;
- }
-
/*
* board_data starts with board_id which differs across boards,
* but we can use 'MPFR' (hopefully) magic at 0x100
continue;
}
}
+
+ /* Look for NVRAM at the end of the last block. */
+ for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
+ if (curr_part > BCM47XXPART_MAX_PARTS) {
+ pr_warn("Reached maximum number of partitions, scanning stopped!\n");
+ break;
+ }
+
+ offset = master->size - possible_nvram_sizes[i];
+ if (mtd_read(master, offset, 0x4, &bytes_read,
+ (uint8_t *)buf) < 0) {
+ pr_err("mtd_read error while reading at offset 0x%X!\n",
+ offset);
+ continue;
+ }
+
+ /* Standard NVRAM */
+ if (buf[0] == NVRAM_HEADER) {
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ master->size - blocksize, 0);
+ break;
+ }
+ }
+
kfree(buf);
/*
oobreadlen -= toread;
}
}
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
readlen -= len;
if (!readlen)
break;
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16},
#endif
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS},
/*
* These are the new chips with large page size. The pagesize and the
bond_compute_features(bond);
+ bond_update_speed_duplex(new_slave);
+
read_lock(&bond->lock);
new_slave->last_arp_rx = jiffies -
new_slave->link == BOND_LINK_DOWN ? "DOWN" :
(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
- bond_update_speed_duplex(new_slave);
-
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
}
block_netpoll_tx();
- call_netdevice_notifiers(NETDEV_RELEASE, bond_dev);
write_lock_bh(&bond->lock);
slave = bond_get_slave_by_dev(bond, slave_dev);
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
- if (bond->slave_cnt == 0)
+ if (bond->slave_cnt == 0) {
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
+ call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
+ }
bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
bond_set_backup_slave(slave);
}
- bond_update_speed_duplex(slave);
-
pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
bond->dev->name, slave->dev->name,
slave->speed, slave->duplex ? "full" : "half");
sprintf(linkname, "slave_%s", slave->name);
ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
linkname);
+
+ /* free the master link created earlier in case of error */
+ if (ret)
+ sysfs_remove_link(&(slave->dev.kobj), "master");
+
return ret;
}
bp->port.pmf = 0;
load_error1:
bnx2x_napi_disable(bp);
+ bnx2x_del_all_napi(bp);
/* clear pf_load status, as it was already set */
if (IS_PF(bp))
break;
default:
BNX2X_ERR("Non valid capability ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
DP(BNX2X_MSG_DCB, "capid %d:%x\n", capid, *cap);
break;
default:
BNX2X_ERR("Non valid TC-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
return -EINVAL;
}
-static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev)
+static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev)
{
struct bnx2x *bp = netdev_priv(netdev);
DP(BNX2X_MSG_DCB, "state = %d\n", bp->dcbx_local_feat.pfc.enabled);
break;
default:
BNX2X_ERR("Non valid featrue-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
break;
default:
BNX2X_ERR("Non valid featrue-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "dcbnl call not valid\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_MISC6,
&rx_tx_in_reset);
- if (!rx_tx_in_reset) {
+ if ((!rx_tx_in_reset) &&
+ (params->link_flags &
+ PHY_INITIALIZED)) {
bnx2x_warpcore_reset_lane(bp, phy, 1);
bnx2x_warpcore_config_sfi(phy, params);
bnx2x_warpcore_reset_lane(bp, phy, 0);
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_NONE;
vars->phy_flags = 0;
+ vars->check_kr2_recovery_cnt = 0;
+ params->link_flags = PHY_INITIALIZED;
/* Driver opens NIG-BRB filters */
bnx2x_set_rx_filter(params, 1);
/* Check if link flap can be avoided */
struct bnx2x *bp = params->bp;
vars->link_up = 0;
vars->phy_flags = 0;
+ params->link_flags &= ~PHY_INITIALIZED;
if (!params->lfa_base)
return bnx2x_link_reset(params, vars, 1);
/*
vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
bnx2x_update_link_attr(params, vars->link_attr_sync);
+ vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT;
/* Restart AN on leading lane */
bnx2x_warpcore_restart_AN_KR(phy, params);
}
return;
}
+ /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
+ * since some switches tend to reinit the AN process and clear the
+ * advertised BP/NP after ~2 seconds causing the KR2 to be disabled
+ * and recovered many times
+ */
+ if (vars->check_kr2_recovery_cnt > 0) {
+ vars->check_kr2_recovery_cnt--;
+ return;
+ }
lane = bnx2x_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
req_flow_ctrl is set to AUTO */
u16 link_flags;
#define LINK_FLAGS_INT_DISABLED (1<<0)
+#define PHY_INITIALIZED (1<<1)
u32 lfa_base;
};
u32 link_status;
u32 eee_status;
u8 fault_detected;
- u8 rsrv1;
+ u8 check_kr2_recovery_cnt;
+#define CHECK_KR2_RECOVERY_CNT 5
u16 periodic_flags;
#define PERIODIC_FLAGS_LINK_EVENT 0x0001
#define UPDATE_QSTAT(s, t) \
do { \
- qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi); \
qstats->t##_lo = qstats_old->t##_lo + le32_to_cpu(s.lo); \
+ qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi) \
+ + ((qstats->t##_lo < qstats_old->t##_lo) ? 1 : 0); \
} while (0)
#define UPDATE_QSTAT_OLD(f) \
tg3_ump_link_report(tp);
}
+
+ tp->link_up = netif_carrier_ok(tp->dev);
}
static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
return err;
}
-static void tg3_carrier_on(struct tg3 *tp)
-{
- netif_carrier_on(tp->dev);
- tp->link_up = true;
-}
-
static void tg3_carrier_off(struct tg3 *tp)
{
netif_carrier_off(tp->dev);
return -EBUSY;
if (netif_running(tp->dev) && tp->link_up) {
- tg3_carrier_off(tp);
+ netif_carrier_off(tp->dev);
tg3_link_report(tp);
}
tp->link_config.active_speed = tp->link_config.speed;
tp->link_config.active_duplex = tp->link_config.duplex;
+ if (tg3_asic_rev(tp) == ASIC_REV_5714) {
+ /* With autoneg disabled, 5715 only links up when the
+ * advertisement register has the configured speed
+ * enabled.
+ */
+ tg3_writephy(tp, MII_ADVERTISE, ADVERTISE_ALL);
+ }
+
bmcr = 0;
switch (tp->link_config.speed) {
default:
{
if (curr_link_up != tp->link_up) {
if (curr_link_up) {
- tg3_carrier_on(tp);
+ netif_carrier_on(tp->dev);
} else {
- tg3_carrier_off(tp);
+ netif_carrier_off(tp->dev);
if (tp->phy_flags & TG3_PHYFLG_MII_SERDES)
tp->phy_flags &= ~TG3_PHYFLG_PARALLEL_DETECT;
}
}
#define EEPROM_STAT_ADDR 0x7bfc
-#define VPD_BASE 0
#define VPD_LEN 512
+#define VPD_BASE 0x400
+#define VPD_BASE_OLD 0
/**
* t4_seeprom_wp - enable/disable EEPROM write protection
int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
{
u32 cclk_param, cclk_val;
- int i, ret;
+ int i, ret, addr;
int ec, sn;
u8 *vpd, csum;
unsigned int vpdr_len, kw_offset, id_len;
if (!vpd)
return -ENOMEM;
- ret = pci_read_vpd(adapter->pdev, VPD_BASE, VPD_LEN, vpd);
+ ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
+ if (ret < 0)
+ goto out;
+ addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD;
+
+ ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
if (ret < 0)
goto out;
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on (PCI || EISA)
+ depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
select CRC32
---help---
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
struct pci_dev *pdev;
struct net_device *netdev;
+ u8 __iomem *csr; /* CSR BAR used only for BE2/3 */
u8 __iomem *db; /* Door Bell */
struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
return 0;
}
-static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
+static u16 be_POST_stage_get(struct be_adapter *adapter)
{
u32 sem;
- u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
- SLIPORT_SEMAPHORE_OFFSET_BE;
- pci_read_config_dword(adapter->pdev, reg, &sem);
- *stage = sem & POST_STAGE_MASK;
-
- if ((sem >> POST_ERR_SHIFT) & POST_ERR_MASK)
- return -1;
+ if (BEx_chip(adapter))
+ sem = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx);
else
- return 0;
+ pci_read_config_dword(adapter->pdev,
+ SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
+
+ return sem & POST_STAGE_MASK;
}
int lancer_wait_ready(struct be_adapter *adapter)
}
do {
- status = be_POST_stage_get(adapter, &stage);
- if (status) {
- dev_err(dev, "POST error; stage=0x%x\n", stage);
- return -1;
- } else if (stage != POST_STAGE_ARMFW_RDY) {
- if (msleep_interruptible(2000)) {
- dev_err(dev, "Waiting for POST aborted\n");
- return -EINTR;
- }
- timeout += 2;
- } else {
+ stage = be_POST_stage_get(adapter);
+ if (stage == POST_STAGE_ARMFW_RDY)
return 0;
+
+ dev_info(dev, "Waiting for POST, %ds elapsed\n",
+ timeout);
+ if (msleep_interruptible(2000)) {
+ dev_err(dev, "Waiting for POST aborted\n");
+ return -EINTR;
}
+ timeout += 2;
} while (timeout < 60);
dev_err(dev, "POST timeout; stage=0x%x\n", stage);
#define MPU_EP_CONTROL 0
/********** MPU semphore: used for SH & BE *************/
-#define SLIPORT_SEMAPHORE_OFFSET_BE 0x7c
-#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94
+#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */
#define POST_STAGE_MASK 0x0000FFFF
#define POST_ERR_MASK 0x1
#define POST_ERR_SHIFT 31
static void be_unmap_pci_bars(struct be_adapter *adapter)
{
+ if (adapter->csr)
+ pci_iounmap(adapter->pdev, adapter->csr);
if (adapter->db)
pci_iounmap(adapter->pdev, adapter->db);
}
adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
SLI_INTF_IF_TYPE_SHIFT;
+ if (BEx_chip(adapter) && be_physfn(adapter)) {
+ adapter->csr = pci_iomap(adapter->pdev, 2, 0);
+ if (adapter->csr == NULL)
+ return -ENOMEM;
+ }
+
addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
if (addr == NULL)
goto pci_map_err;
pci_restore_state(pdev);
/* Check if card is ok and fw is ready */
+ dev_info(&adapter->pdev->dev,
+ "Waiting for FW to be ready after EEH reset\n");
status = be_fw_wait_ready(adapter);
if (status)
return PCI_ERS_RESULT_DISCONNECT;
goto spin_unlock;
}
- /* Duplex link change */
if (phy_dev->link) {
- if (fep->full_duplex != phy_dev->duplex) {
- fec_restart(ndev, phy_dev->duplex);
- /* prevent unnecessary second fec_restart() below */
+ if (!fep->link) {
fep->link = phy_dev->link;
status_change = 1;
}
- }
- /* Link on or off change */
- if (phy_dev->link != fep->link) {
- fep->link = phy_dev->link;
- if (phy_dev->link)
+ if (fep->full_duplex != phy_dev->duplex)
+ status_change = 1;
+
+ if (phy_dev->speed != fep->speed) {
+ fep->speed = phy_dev->speed;
+ status_change = 1;
+ }
+
+ /* if any of the above changed restart the FEC */
+ if (status_change)
fec_restart(ndev, phy_dev->duplex);
- else
+ } else {
+ if (fep->link) {
fec_stop(ndev);
- status_change = 1;
+ status_change = 1;
+ }
}
spin_unlock:
static void fec_enet_free_buffers(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- int i;
+ unsigned int i;
struct sk_buff *skb;
struct bufdesc *bdp;
static int fec_enet_alloc_buffers(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- int i;
+ unsigned int i;
struct sk_buff *skb;
struct bufdesc *bdp;
struct fec_enet_private *fep = netdev_priv(ndev);
/* Don't know what to do yet. */
+ napi_disable(&fep->napi);
fep->opened = 0;
netif_stop_queue(ndev);
fec_stop(ndev);
struct fec_enet_private *fep = netdev_priv(ndev);
struct bufdesc *cbd_base;
struct bufdesc *bdp;
- int i;
+ unsigned int i;
/* Allocate memory for buffer descriptors. */
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
phy_interface_t phy_interface;
int link;
int full_duplex;
+ int speed;
struct completion mdio_done;
int irq[FEC_IRQ_NUM];
int bufdesc_ex;
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
}
+EXPORT_SYMBOL(fec_ptp_start_cyclecounter);
/**
* fec_ptp_adjfreq - adjust ptp cycle frequency
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
+EXPORT_SYMBOL(fec_ptp_ioctl);
/**
* fec_time_keep - call timecounter_read every second to avoid timer overrun
pr_info("registered PHC device on %s\n", ndev->name);
}
}
+EXPORT_SYMBOL(fec_ptp_init);
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/mdio.h>
+#include <linux/pm_runtime.h>
#include "e1000.h"
return 0;
}
+static int e1000e_ethtool_begin(struct net_device *netdev)
+{
+ return pm_runtime_get_sync(netdev->dev.parent);
+}
+
+static void e1000e_ethtool_complete(struct net_device *netdev)
+{
+ pm_runtime_put_sync(netdev->dev.parent);
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
+ .begin = e1000e_ethtool_begin,
+ .complete = e1000e_ethtool_complete,
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
.get_drvinfo = e1000_get_drvinfo,
return ret_val;
}
+/**
+ * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
+ * @hw: pointer to the HW structure
+ * @link: link up bool flag
+ *
+ * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
+ * preventing further DMA write requests. Workaround the issue by disabling
+ * the de-assertion of the clock request when in 1Gpbs mode.
+ **/
+static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
+{
+ u32 fextnvm6 = er32(FEXTNVM6);
+ s32 ret_val = 0;
+
+ if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) {
+ u16 kmrn_reg;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
+ if (ret_val)
+ goto release;
+
+ ret_val =
+ e1000e_write_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg &
+ ~E1000_KMRNCTRLSTA_K1_ENABLE);
+ if (ret_val)
+ goto release;
+
+ usleep_range(10, 20);
+
+ ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);
+
+ ret_val =
+ e1000e_write_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
+release:
+ hw->phy.ops.release(hw);
+ } else {
+ /* clear FEXTNVM6 bit 8 on link down or 10/100 */
+ ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+ }
+
+ return ret_val;
+}
+
/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
return ret_val;
}
+ /* Work-around I218 hang issue */
+ if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+ ret_val = e1000_k1_workaround_lpt_lp(hw, link);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Clear link partner's EEE ability */
hw->dev_spec.ich8lan.eee_lp_ability = 0;
phy_ctrl = er32(PHY_CTRL);
phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+
if (hw->phy.type == e1000_phy_i217) {
- u16 phy_reg;
+ u16 phy_reg, device_id = hw->adapter->pdev->device;
+
+ if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+ (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+ u32 fextnvm6 = er32(FEXTNVM6);
+
+ ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+ }
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
+#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100
+
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
#define E1000_ICH_RAR_ENTRIES 7
netif_start_queue(netdev);
adapter->idle_check = true;
+ hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
/* fire a link status change interrupt to start the watchdog */
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
int ret_val;
+ pm_runtime_get_sync(&adapter->pdev->dev);
ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
if (ret_val)
e_warn("Error reading PHY register\n");
+ pm_runtime_put_sync(&adapter->pdev->dev);
} else {
/* Do not read PHY registers if link is not up
* Set values to typical power-on defaults
return retval;
}
-static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
- bool runtime)
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
}
e1000e_reset_interrupt_capability(adapter);
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-
status = er32(STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
ew32(WUFC, 0);
}
- *enable_wake = !!wufc;
-
- /* make sure adapter isn't asleep if manageability is enabled */
- if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
- (hw->mac.ops.check_mng_mode(hw)))
- *enable_wake = true;
-
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
*/
e1000e_release_hw_control(adapter);
- pci_disable_device(pdev);
-
- return 0;
-}
-
-static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
-{
- if (sleep && wake) {
- pci_prepare_to_sleep(pdev);
- return;
- }
-
- pci_wake_from_d3(pdev, wake);
- pci_set_power_state(pdev, PCI_D3hot);
-}
-
-static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
+ pci_clear_master(pdev);
/* The pci-e switch on some quad port adapters will report a
* correctable error when the MAC transitions from D0 to D3. To
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
(devctl & ~PCI_EXP_DEVCTL_CERE));
- e1000_power_off(pdev, sleep, wake);
+ pci_save_state(pdev);
+ pci_prepare_to_sleep(pdev);
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
- } else {
- e1000_power_off(pdev, sleep, wake);
}
+
+ return 0;
}
#ifdef CONFIG_PCIEASPM
if (aspm_disable_flag)
e1000e_disable_aspm(pdev, aspm_disable_flag);
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_save_state(pdev);
+ pci_set_master(pdev);
e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
static int e1000_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- int retval;
- bool wake;
-
- retval = __e1000_shutdown(pdev, &wake, false);
- if (!retval)
- e1000_complete_shutdown(pdev, true, wake);
- return retval;
+ return __e1000_shutdown(pdev, false);
}
static int e1000_resume(struct device *dev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (e1000e_pm_ready(adapter)) {
- bool wake;
-
- __e1000_shutdown(pdev, &wake, true);
- }
+ if (!e1000e_pm_ready(adapter))
+ return 0;
- return 0;
+ return __e1000_shutdown(pdev, true);
}
static int e1000_idle(struct device *dev)
static void e1000_shutdown(struct pci_dev *pdev)
{
- bool wake = false;
-
- __e1000_shutdown(pdev, &wake, false);
-
- if (system_state == SYSTEM_POWER_OFF)
- e1000_complete_shutdown(pdev, false, wake);
+ __e1000_shutdown(pdev, false);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
"Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
- pci_set_master(pdev);
pdev->state_saved = true;
pci_restore_state(pdev);
+ pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
+ (hw->mac.ops.check_mng_mode(hw)))
+ device_wakeup_enable(&pdev->dev);
/* save off EEPROM version number */
e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
#define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */
#define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */
#define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */
#define E1000_FCT 0x00030 /* Flow Control Type - RW */
#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
switch (hw->phy.type) {
case e1000_phy_i210:
case e1000_phy_m88:
- if (hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID)
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case I210_I_PHY_ID:
ret_val = igb_copper_link_setup_m88_gen2(hw);
- else
+ break;
+ default:
ret_val = igb_copper_link_setup_m88(hw);
+ break;
+ }
break;
case e1000_phy_igp_3:
ret_val = igb_copper_link_setup_igp(hw);
**/
void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
{
- u32 dtxswc;
+ u32 reg_val, reg_offset;
switch (hw->mac.type) {
case e1000_82576:
+ reg_offset = E1000_DTXSWC;
+ break;
case e1000_i350:
- dtxswc = rd32(E1000_DTXSWC);
- if (enable) {
- dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- /* The PF can spoof - it has to in order to
- * support emulation mode NICs */
- dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
- } else {
- dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- }
- wr32(E1000_DTXSWC, dtxswc);
+ reg_offset = E1000_TXSWC;
break;
default:
- break;
+ return;
+ }
+
+ reg_val = rd32(reg_offset);
+ if (enable) {
+ reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ /* The PF can spoof - it has to in order to
+ * support emulation mode NICs
+ */
+ reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+ } else {
+ reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
}
+ wr32(reg_offset, reg_val);
}
/**
#endif
struct i2c_algo_bit_data i2c_algo;
struct i2c_adapter i2c_adap;
- struct igb_i2c_client_list *i2c_clients;
+ struct i2c_client *i2c_client;
};
#define IGB_FLAG_HAS_MSI (1 << 0)
#include <linux/pci.h>
#ifdef CONFIG_IGB_HWMON
+static struct i2c_board_info i350_sensor_info = {
+ I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
+};
+
/* hwmon callback functions */
static ssize_t igb_hwmon_show_location(struct device *dev,
struct device_attribute *attr,
unsigned int i;
int n_attrs;
int rc = 0;
+ struct i2c_client *client = NULL;
/* If this method isn't defined we don't support thermals */
if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
if (rc)
goto exit;
+ /* init i2c_client */
+ client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
+ if (client == NULL) {
+ dev_info(&adapter->pdev->dev,
+ "Failed to create new i2c device..\n");
+ goto exit;
+ }
+ adapter->i2c_client = client;
+
/* Allocation space for max attributes
* max num sensors * values (loc, temp, max, caution)
*/
return;
}
-static const struct i2c_board_info i350_sensor_info = {
- I2C_BOARD_INFO("i350bb", 0Xf8),
-};
-
/* igb_init_i2c - Init I2C interface
* @adapter: pointer to adapter structure
*
if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
return;
- igb_enable_sriov(pdev, max_vfs);
pci_sriov_set_totalvfs(pdev, 7);
+ igb_enable_sriov(pdev, max_vfs);
#endif /* CONFIG_PCI_IOV */
}
if (max_vfs > 7) {
dev_warn(&pdev->dev,
"Maximum of 7 VFs per PF, using max\n");
- adapter->vfs_allocated_count = 7;
+ max_vfs = adapter->vfs_allocated_count = 7;
} else
adapter->vfs_allocated_count = max_vfs;
if (adapter->vfs_allocated_count)
/* If we spanned a buffer we have a huge mess so test for it */
BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)));
- /* Guarantee this function can be used by verifying buffer sizes */
- BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD +
- NET_IP_ALIGN +
- IGB_TS_HDR_LEN +
- ETH_FRAME_LEN +
- ETH_FCS_LEN));
-
rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
page = rx_buffer->page;
prefetchw(page);
}
}
-static DEFINE_SPINLOCK(i2c_clients_lock);
-
-/* igb_get_i2c_client - returns matching client
- * in adapters's client list.
- * @adapter: adapter struct
- * @dev_addr: device address of i2c needed.
- */
-static struct i2c_client *
-igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
-{
- ulong flags;
- struct igb_i2c_client_list *client_list;
- struct i2c_client *client = NULL;
- struct i2c_board_info client_info = {
- I2C_BOARD_INFO("igb", 0x00),
- };
-
- spin_lock_irqsave(&i2c_clients_lock, flags);
- client_list = adapter->i2c_clients;
-
- /* See if we already have an i2c_client */
- while (client_list) {
- if (client_list->client->addr == (dev_addr >> 1)) {
- client = client_list->client;
- goto exit;
- } else {
- client_list = client_list->next;
- }
- }
-
- /* no client_list found, create a new one */
- client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC);
- if (client_list == NULL)
- goto exit;
-
- /* dev_addr passed to us is left-shifted by 1 bit
- * i2c_new_device call expects it to be flush to the right.
- */
- client_info.addr = dev_addr >> 1;
- client_info.platform_data = adapter;
- client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
- if (client_list->client == NULL) {
- dev_info(&adapter->pdev->dev,
- "Failed to create new i2c device..\n");
- goto err_no_client;
- }
-
- /* insert new client at head of list */
- client_list->next = adapter->i2c_clients;
- adapter->i2c_clients = client_list;
-
- client = client_list->client;
- goto exit;
-
-err_no_client:
- kfree(client_list);
-exit:
- spin_unlock_irqrestore(&i2c_clients_lock, flags);
- return client;
-}
-
/* igb_read_i2c_byte - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
u8 dev_addr, u8 *data)
{
struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
- struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ struct i2c_client *this_client = adapter->i2c_client;
s32 status;
u16 swfw_mask = 0;
u8 dev_addr, u8 data)
{
struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
- struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ struct i2c_client *this_client = adapter->i2c_client;
s32 status;
u16 swfw_mask = E1000_SWFW_PHY0_SM;
case e1000_82576:
snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
adapter->ptp_caps.owner = THIS_MODULE;
- adapter->ptp_caps.max_adj = 1000000000;
+ adapter->ptp_caps.max_adj = 999999881;
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.pps = 0;
adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576;
free_irq(adapter->msix_entries[vector].vector,
adapter->q_vector[vector]);
}
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
+ /* This failure is non-recoverable - it indicates the system is
+ * out of MSIX vector resources and the VF driver cannot run
+ * without them. Set the number of msix vectors to zero
+ * indicating that not enough can be allocated. The error
+ * will be returned to the user indicating device open failed.
+ * Any further attempts to force the driver to open will also
+ * fail. The only way to recover is to unload the driver and
+ * reload it again. If the system has recovered some MSIX
+ * vectors then it may succeed.
+ */
+ adapter->num_msix_vectors = 0;
return err;
}
struct ixgbe_hw *hw = &adapter->hw;
int err;
+ /* A previous failure to open the device because of a lack of
+ * available MSIX vector resources may have reset the number
+ * of msix vectors variable to zero. The only way to recover
+ * is to unload/reload the driver and hope that the system has
+ * been able to recover some MSIX vector resources.
+ */
+ if (!adapter->num_msix_vectors)
+ return -ENOMEM;
+
/* disallow open during test */
if (test_bit(__IXGBEVF_TESTING, &adapter->state))
return -EBUSY;
err_req_irq:
ixgbevf_down(adapter);
- ixgbevf_free_irq(adapter);
err_setup_rx:
ixgbevf_free_all_rx_resources(adapter);
err_setup_tx:
return 0;
err_free:
- kfree(dev);
+ free_netdev(dev);
err_out:
return err;
}
/* mii management interface *************************************************/
+static void mv643xx_adjust_pscr(struct mv643xx_eth_private *mp)
+{
+ u32 pscr = rdlp(mp, PORT_SERIAL_CONTROL);
+ u32 autoneg_disable = FORCE_LINK_PASS |
+ DISABLE_AUTO_NEG_SPEED_GMII |
+ DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
+ DISABLE_AUTO_NEG_FOR_DUPLEX;
+
+ if (mp->phy->autoneg == AUTONEG_ENABLE) {
+ /* enable auto negotiation */
+ pscr &= ~autoneg_disable;
+ goto out_write;
+ }
+
+ pscr |= autoneg_disable;
+
+ if (mp->phy->speed == SPEED_1000) {
+ /* force gigabit, half duplex not supported */
+ pscr |= SET_GMII_SPEED_TO_1000;
+ pscr |= SET_FULL_DUPLEX_MODE;
+ goto out_write;
+ }
+
+ pscr &= ~SET_GMII_SPEED_TO_1000;
+
+ if (mp->phy->speed == SPEED_100)
+ pscr |= SET_MII_SPEED_TO_100;
+ else
+ pscr &= ~SET_MII_SPEED_TO_100;
+
+ if (mp->phy->duplex == DUPLEX_FULL)
+ pscr |= SET_FULL_DUPLEX_MODE;
+ else
+ pscr &= ~SET_FULL_DUPLEX_MODE;
+
+out_write:
+ wrlp(mp, PORT_SERIAL_CONTROL, pscr);
+}
+
static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id)
{
struct mv643xx_eth_shared_private *msp = dev_id;
mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int ret;
if (mp->phy == NULL)
return -EINVAL;
*/
cmd->advertising &= ~ADVERTISED_1000baseT_Half;
- return phy_ethtool_sset(mp->phy, cmd);
+ ret = phy_ethtool_sset(mp->phy, cmd);
+ if (!ret)
+ mv643xx_adjust_pscr(mp);
+ return ret;
}
static void mv643xx_eth_get_drvinfo(struct net_device *dev,
static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int ret;
- if (mp->phy != NULL)
- return phy_mii_ioctl(mp->phy, ifr, cmd);
+ if (mp->phy == NULL)
+ return -ENOTSUPP;
- return -EOPNOTSUPP;
+ ret = phy_mii_ioctl(mp->phy, ifr, cmd);
+ if (!ret)
+ mv643xx_adjust_pscr(mp);
+ return ret;
}
static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
static void mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
struct mlx4_en_dev *mdev = priv->mdev;
struct mlx4_dev *dev = mdev->dev;
int qpn = priv->base_qpn;
- u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
-
- en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
- priv->dev->dev_addr);
- mlx4_unregister_mac(dev, priv->port, mac);
+ u64 mac;
- if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) {
+ if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) {
+ mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
+ en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
+ priv->dev->dev_addr);
+ mlx4_unregister_mac(dev, priv->port, mac);
+ } else {
struct mlx4_mac_entry *entry;
struct hlist_node *tmp;
struct hlist_head *bucket;
- unsigned int mac_hash;
+ unsigned int i;
- mac_hash = priv->dev->dev_addr[MLX4_EN_MAC_HASH_IDX];
- bucket = &priv->mac_hash[mac_hash];
- hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
- if (ether_addr_equal_64bits(entry->mac,
- priv->dev->dev_addr)) {
- en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n",
- priv->port, priv->dev->dev_addr, qpn);
+ for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) {
+ bucket = &priv->mac_hash[i];
+ hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
+ mac = mlx4_en_mac_to_u64(entry->mac);
+ en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
+ entry->mac);
mlx4_en_uc_steer_release(priv, entry->mac,
qpn, entry->reg_id);
- mlx4_qp_release_range(dev, qpn, 1);
+ mlx4_unregister_mac(dev, priv->port, mac);
hlist_del_rcu(&entry->hlist);
kfree_rcu(entry, rcu);
- break;
}
}
+
+ en_dbg(DRV, priv, "Releasing qp: port %d, qpn %d\n",
+ priv->port, qpn);
+ mlx4_qp_release_range(dev, qpn, 1);
+ priv->flags &= ~MLX4_EN_FLAG_FORCE_PROMISC;
}
}
return mac;
}
-static int mlx4_en_set_mac(struct net_device *dev, void *addr)
-{
- struct mlx4_en_priv *priv = netdev_priv(dev);
- struct mlx4_en_dev *mdev = priv->mdev;
- struct sockaddr *saddr = addr;
-
- if (!is_valid_ether_addr(saddr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
- queue_work(mdev->workqueue, &priv->mac_task);
- return 0;
-}
-
-static void mlx4_en_do_set_mac(struct work_struct *work)
+static int mlx4_en_do_set_mac(struct mlx4_en_priv *priv)
{
- struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
- mac_task);
- struct mlx4_en_dev *mdev = priv->mdev;
int err = 0;
- mutex_lock(&mdev->state_lock);
if (priv->port_up) {
/* Remove old MAC and insert the new one */
err = mlx4_en_replace_mac(priv, priv->base_qpn,
} else
en_dbg(HW, priv, "Port is down while registering mac, exiting...\n");
+ return err;
+}
+
+static int mlx4_en_set_mac(struct net_device *dev, void *addr)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ struct sockaddr *saddr = addr;
+ int err;
+
+ if (!is_valid_ether_addr(saddr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
+
+ mutex_lock(&mdev->state_lock);
+ err = mlx4_en_do_set_mac(priv);
mutex_unlock(&mdev->state_lock);
+
+ return err;
}
static void mlx4_en_clear_list(struct net_device *dev)
queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
}
if (mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port]) {
- queue_work(mdev->workqueue, &priv->mac_task);
+ mlx4_en_do_set_mac(priv);
mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port] = 0;
}
mutex_unlock(&mdev->state_lock);
/* Flush multicast filter */
mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, 1, MLX4_MCAST_CONFIG);
+ /* Remove flow steering rules for the port*/
+ if (mdev->dev->caps.steering_mode ==
+ MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ ASSERT_RTNL();
+ list_for_each_entry_safe(flow, tmp_flow,
+ &priv->ethtool_list, list) {
+ mlx4_flow_detach(mdev->dev, flow->id);
+ list_del(&flow->list);
+ }
+ }
+
mlx4_en_destroy_drop_qp(priv);
/* Free TX Rings */
if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN))
mdev->mac_removed[priv->port] = 1;
- /* Remove flow steering rules for the port*/
- if (mdev->dev->caps.steering_mode ==
- MLX4_STEERING_MODE_DEVICE_MANAGED) {
- ASSERT_RTNL();
- list_for_each_entry_safe(flow, tmp_flow,
- &priv->ethtool_list, list) {
- mlx4_flow_detach(mdev->dev, flow->id);
- list_del(&flow->list);
- }
- }
-
/* Free RX Rings */
for (i = 0; i < priv->rx_ring_num; i++) {
mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
}
#ifdef CONFIG_RFS_ACCEL
- priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
- if (!priv->dev->rx_cpu_rmap)
- goto err;
+ if (priv->mdev->dev->caps.comp_pool) {
+ priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
+ if (!priv->dev->rx_cpu_rmap)
+ goto err;
+ }
#endif
return 0;
priv->msg_enable = MLX4_EN_MSG_LEVEL;
spin_lock_init(&priv->stats_lock);
INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
- INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac);
INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
struct mlx4_slave_event_eq_info *event_eq =
priv->mfunc.master.slave_state[slave].event_eq;
u32 in_modifier = vhcr->in_modifier;
- u32 eqn = in_modifier & 0x1FF;
+ u32 eqn = in_modifier & 0x3FF;
u64 in_param = vhcr->in_param;
int err = 0;
int i;
bmme_flags &= ~MLX4_BMME_FLAG_TYPE_2_WIN;
MLX4_PUT(outbox->buf, bmme_flags, QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
+ /* turn off device-managed steering capability if not enabled */
+ if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ MLX4_GET(field, outbox->buf,
+ QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
+ field &= 0x7f;
+ MLX4_PUT(outbox->buf, field,
+ QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
+ }
return 0;
}
void mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, idx);
static inline void set_param_l(u64 *arg, u32 val)
{
- *((u32 *)arg) = val;
+ *arg = (*arg & 0xffffffff00000000ULL) | (u64) val;
}
static inline void set_param_h(u64 *arg, u32 val)
struct mlx4_en_cq rx_cq[MAX_RX_RINGS];
struct mlx4_qp drop_qp;
struct work_struct rx_mode_task;
- struct work_struct mac_task;
struct work_struct watchdog_task;
struct work_struct linkstate_task;
struct delayed_work stats_task;
static u32 mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order)
{
- u64 in_param;
+ u64 in_param = 0;
u64 out_param;
int err;
static void mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
static void mlx4_mpt_release(struct mlx4_dev *dev, u32 index)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, index);
static int mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
{
- u64 param;
+ u64 param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(¶m, index);
static void mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, index);
void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac)
{
- u64 out_param;
+ u64 out_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac)
{
- u64 out_param;
+ u64 out_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&out_param, port);
int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
{
- u64 out_param;
+ u64 out_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base)
{
- u64 in_param;
+ u64 in_param = 0;
u64 out_param;
int err;
void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
static int mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn)
{
- u64 param;
+ u64 param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(¶m, qpn);
static void mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, qpn);
struct list_head mcg_list;
spinlock_t mcg_spl;
int local_qpn;
+ atomic_t ref_count;
};
enum res_mtt_states {
struct res_fs_rule {
struct res_common com;
+ int qpn;
};
static void *res_tracker_lookup(struct rb_root *root, u64 res_id)
return dev->caps.num_mpts - 1;
}
-static void *find_res(struct mlx4_dev *dev, int res_id,
+static void *find_res(struct mlx4_dev *dev, u64 res_id,
enum mlx4_resource type)
{
struct mlx4_priv *priv = mlx4_priv(dev);
ret->local_qpn = id;
INIT_LIST_HEAD(&ret->mcg_list);
spin_lock_init(&ret->mcg_spl);
+ atomic_set(&ret->ref_count, 0);
return &ret->com;
}
return &ret->com;
}
-static struct res_common *alloc_fs_rule_tr(u64 id)
+static struct res_common *alloc_fs_rule_tr(u64 id, int qpn)
{
struct res_fs_rule *ret;
ret->com.res_id = id;
ret->com.state = RES_FS_RULE_ALLOCATED;
-
+ ret->qpn = qpn;
return &ret->com;
}
ret = alloc_xrcdn_tr(id);
break;
case RES_FS_RULE:
- ret = alloc_fs_rule_tr(id);
+ ret = alloc_fs_rule_tr(id, extra);
break;
default:
return NULL;
static int remove_qp_ok(struct res_qp *res)
{
- if (res->com.state == RES_QP_BUSY)
+ if (res->com.state == RES_QP_BUSY || atomic_read(&res->ref_count) ||
+ !list_empty(&res->mcg_list)) {
+ pr_err("resource tracker: fail to remove qp, state %d, ref_count %d\n",
+ res->com.state, atomic_read(&res->ref_count));
return -EBUSY;
- else if (res->com.state != RES_QP_RESERVED)
+ } else if (res->com.state != RES_QP_RESERVED) {
return -EPERM;
+ }
return 0;
}
u8 steer_type_mask = 2;
enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1;
+ if (dev->caps.steering_mode != MLX4_STEERING_MODE_B0)
+ return -EINVAL;
+
qpn = vhcr->in_modifier & 0xffffff;
err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err)
struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC];
int err;
int qpn;
+ struct res_qp *rqp;
struct mlx4_net_trans_rule_hw_ctrl *ctrl;
struct _rule_hw *rule_header;
int header_id;
ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
qpn = be32_to_cpu(ctrl->qpn) & 0xffffff;
- err = get_res(dev, slave, qpn, RES_QP, NULL);
+ err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err) {
pr_err("Steering rule with qpn 0x%x rejected.\n", qpn);
return err;
if (err)
goto err_put;
- err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, 0);
+ err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, qpn);
if (err) {
mlx4_err(dev, "Fail to add flow steering resources.\n ");
/* detach rule*/
mlx4_cmd(dev, vhcr->out_param, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
+ goto err_put;
}
+ atomic_inc(&rqp->ref_count);
err_put:
put_res(dev, slave, qpn, RES_QP);
return err;
struct mlx4_cmd_info *cmd)
{
int err;
+ struct res_qp *rqp;
+ struct res_fs_rule *rrule;
if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
return -EOPNOTSUPP;
+ err = get_res(dev, slave, vhcr->in_param, RES_FS_RULE, &rrule);
+ if (err)
+ return err;
+ /* Release the rule form busy state before removal */
+ put_res(dev, slave, vhcr->in_param, RES_FS_RULE);
+ err = get_res(dev, slave, rrule->qpn, RES_QP, &rqp);
+ if (err)
+ return err;
+
err = rem_res_range(dev, slave, vhcr->in_param, 1, RES_FS_RULE, 0);
if (err) {
mlx4_err(dev, "Fail to remove flow steering resources.\n ");
- return err;
+ goto out;
}
err = mlx4_cmd(dev, vhcr->in_param, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
+ if (!err)
+ atomic_dec(&rqp->ref_count);
+out:
+ put_res(dev, slave, rrule->qpn, RES_QP);
return err;
}
mutex_lock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex);
/*VLAN*/
rem_slave_macs(dev, slave);
+ rem_slave_fs_rule(dev, slave);
rem_slave_qps(dev, slave);
rem_slave_srqs(dev, slave);
rem_slave_cqs(dev, slave);
rem_slave_mtts(dev, slave);
rem_slave_counters(dev, slave);
rem_slave_xrcdns(dev, slave);
- rem_slave_fs_rule(dev, slave);
mutex_unlock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex);
}
static void mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, srqn);
}
platform_set_drvdata(pdev, ndev);
- if (lpc_mii_init(pldat) != 0)
+ ret = lpc_mii_init(pldat);
+ if (ret)
goto err_out_unregister_netdev;
netdev_info(ndev, "LPC mac at 0x%08x irq %d\n",
skb->protocol = eth_type_trans(skb, netdev);
if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK)
- skb->ip_summed = CHECKSUM_NONE;
- else
skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
napi_gro_receive(&adapter->napi, skb);
(*work_done)++;
/* MDIO bus release function */
static int sh_mdio_release(struct net_device *ndev)
{
+ struct sh_eth_private *mdp = netdev_priv(ndev);
struct mii_bus *bus = dev_get_drvdata(&ndev->dev);
/* unregister mdio bus */
/* free bitbang info */
free_mdio_bitbang(bus);
+ /* free bitbang memory */
+ kfree(mdp->bitbang);
+
return 0;
}
bitbang->ctrl.ops = &bb_ops;
/* MII controller setting */
+ mdp->bitbang = bitbang;
mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!mdp->mii_bus) {
ret = -ENOMEM;
}
mdp->tsu_addr = ioremap(rtsu->start,
resource_size(rtsu));
+ if (mdp->tsu_addr == NULL) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "TSU ioremap failed.\n");
+ goto out_release;
+ }
mdp->port = devno % 2;
ndev->features = NETIF_F_HW_VLAN_FILTER;
}
const u16 *reg_offset;
void __iomem *addr;
void __iomem *tsu_addr;
+ struct bb_info *bitbang;
u32 num_rx_ring;
u32 num_tx_ring;
dma_addr_t rx_desc_dma;
* TX scheduler is stopped when we're done and before
* netif_device_present() becomes false.
*/
- netif_tx_lock(dev);
+ netif_tx_lock_bh(dev);
netif_device_detach(dev);
- netif_tx_unlock(dev);
+ netif_tx_unlock_bh(dev);
}
#endif /* EFX_EFX_H */
return false;
tx_queue->empty_read_count = 0;
- return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0;
+ return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0
+ && tx_queue->write_count - write_count == 1;
}
/* For each entry inserted into the software descriptor ring, create a
rx_buf = efx_rx_buffer(rx_queue, index);
rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN;
rx_buf->u.page = page;
- rx_buf->page_offset = page_offset;
+ rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN;
rx_buf->len = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN;
rx_buf->flags = EFX_RX_BUF_PAGE;
++rx_queue->added_count;
/* If there is no more tx desc left free then we need to
* tell the kernel to stop sending us tx frames.
*/
- if (unlikely(cpdma_check_free_tx_desc(priv->txch)))
+ if (unlikely(!cpdma_check_free_tx_desc(priv->txch)))
netif_stop_queue(ndev);
return NETDEV_TX_OK;
struct platform_device *mdio;
parp = of_get_property(slave_node, "phy_id", &lenp);
- if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) {
+ if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
pr_err("Missing slave[%d] phy_id property\n", i);
ret = -EINVAL;
goto error_ret;
/* If there is no more tx desc left free then we need to
* tell the kernel to stop sending us tx frames.
*/
- if (unlikely(cpdma_check_free_tx_desc(priv->txchan)))
+ if (unlikely(!cpdma_check_free_tx_desc(priv->txchan)))
netif_stop_queue(ndev);
return NETDEV_TX_OK;
return 0;
out:
+ if (rrpriv->evt_ring)
+ pci_free_consistent(pdev, EVT_RING_SIZE, rrpriv->evt_ring,
+ rrpriv->evt_ring_dma);
if (rrpriv->rx_ring)
pci_free_consistent(pdev, RX_TOTAL_SIZE, rrpriv->rx_ring,
rrpriv->rx_ring_dma);
ether_setup(dev);
dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
+ dev->priv_flags |= IFF_UNICAST_FLT;
dev->netdev_ops = &macvlan_netdev_ops;
dev->destructor = free_netdev;
dev->header_ops = &macvlan_hard_header_ops,
goto done;
spin_lock_irqsave(&target_list_lock, flags);
+restart:
list_for_each_entry(nt, &target_list, list) {
netconsole_target_get(nt);
if (nt->np.dev == dev) {
case NETDEV_UNREGISTER:
/*
* rtnl_lock already held
+ * we might sleep in __netpoll_cleanup()
*/
- if (nt->np.dev) {
- __netpoll_cleanup(&nt->np);
- dev_put(nt->np.dev);
- nt->np.dev = NULL;
- }
+ spin_unlock_irqrestore(&target_list_lock, flags);
+ __netpoll_cleanup(&nt->np);
+ spin_lock_irqsave(&target_list_lock, flags);
+ dev_put(nt->np.dev);
+ nt->np.dev = NULL;
nt->enabled = 0;
stopped = true;
- break;
+ netconsole_target_put(nt);
+ goto restart;
}
}
netconsole_target_put(nt);
netdev_upper_dev_unlink(port_dev, dev);
team_port_disable_netpoll(port);
vlan_vids_del_by_dev(port_dev, dev);
+ dev_uc_unsync(port_dev, dev);
+ dev_mc_unsync(port_dev, dev);
dev_close(port_dev);
team_port_leave(team, port);
goto drop;
skb_orphan(skb);
+ nf_reset(skb);
+
/* Enqueue packet */
skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb);
select CRC16
select CRC32
help
- This option adds support for SMSC LAN95XX based USB 2.0
+ This option adds support for SMSC LAN75XX based USB 2.0
Gigabit Ethernet adapters.
config USB_NET_SMSC95XX
struct cdc_ncm_ctx *ctx;
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
- u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM;
+ u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf);
struct cdc_mbim_state *info = (void *)&dev->data;
- /* see if interface supports MBIM alternate setting */
- if (intf->num_altsetting == 2) {
- if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM);
- data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
- }
-
/* Probably NCM, defer for cdc_ncm_bind */
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
goto err;
#define DRIVER_VERSION "14-Mar-2012"
+#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
+static bool prefer_mbim = true;
+#else
+static bool prefer_mbim;
+#endif
+module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
+
static void cdc_ncm_txpath_bh(unsigned long param);
static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
}
EXPORT_SYMBOL_GPL(cdc_ncm_unbind);
-static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+/* Select the MBIM altsetting iff it is preferred and available,
+ * returning the number of the corresponding data interface altsetting
+ */
+u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ struct usb_host_interface *alt;
/* The MBIM spec defines a NCM compatible default altsetting,
* which we may have matched:
* endpoint descriptors, shall be constructed according to
* the rules given in section 6 (USB Device Model) of this
* specification."
- *
- * Do not bind to such interfaces, allowing cdc_mbim to handle
- * them
*/
-#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
- if ((intf->num_altsetting == 2) &&
- !usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM)) {
- if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- return -ENODEV;
- else
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_NCM);
+ if (prefer_mbim && intf->num_altsetting == 2) {
+ alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+ if (alt && cdc_ncm_comm_intf_is_mbim(alt) &&
+ !usb_set_interface(dev->udev,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ CDC_NCM_COMM_ALTSETTING_MBIM))
+ return CDC_NCM_DATA_ALTSETTING_MBIM;
}
-#endif
+ return CDC_NCM_DATA_ALTSETTING_NCM;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+
+ /* MBIM backwards compatible function? */
+ cdc_ncm_select_altsetting(dev, intf);
+ if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+ return -ENODEV;
/* NCM data altsetting is always 1 */
ret = cdc_ncm_bind_common(dev, intf, 1);
BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state)));
- /* control and data is shared? */
- if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
- info->control = intf;
- info->data = intf;
- goto shared;
- }
-
- /* else require a single interrupt status endpoint on control intf */
- if (intf->cur_altsetting->desc.bNumEndpoints != 1)
- goto err;
+ /* set up initial state */
+ info->control = intf;
+ info->data = intf;
/* and a number of CDC descriptors */
while (len > 3) {
buf += h->bLength;
}
- /* did we find all the required ones? */
- if (!(found & (1 << USB_CDC_HEADER_TYPE)) ||
- !(found & (1 << USB_CDC_UNION_TYPE))) {
- dev_err(&intf->dev, "CDC functional descriptors missing\n");
- goto err;
- }
-
- /* verify CDC Union */
- if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) {
- dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0);
- goto err;
- }
-
- /* need to save these for unbind */
- info->control = intf;
- info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0);
- if (!info->data) {
- dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0);
- goto err;
+ /* Use separate control and data interfaces if we found a CDC Union */
+ if (cdc_union) {
+ info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0);
+ if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 || !info->data) {
+ dev_err(&intf->dev, "bogus CDC Union: master=%u, slave=%u\n",
+ cdc_union->bMasterInterface0, cdc_union->bSlaveInterface0);
+ goto err;
+ }
}
/* errors aren't fatal - we can live with the dynamic address */
}
/* claim data interface and set it up */
- status = usb_driver_claim_interface(driver, info->data, dev);
- if (status < 0)
- goto err;
+ if (info->control != info->data) {
+ status = usb_driver_claim_interface(driver, info->data, dev);
+ if (status < 0)
+ goto err;
+ }
-shared:
status = qmi_wwan_register_subdriver(dev);
if (status < 0 && info->control != info->data) {
usb_set_intfdata(info->data, NULL);
adapter->num_rx_queues = num_rx_queues;
adapter->num_tx_queues = num_tx_queues;
+ adapter->rx_buf_per_pkt = 1;
size = sizeof(struct Vmxnet3_TxQueueDesc) * adapter->num_tx_queues;
size += sizeof(struct Vmxnet3_RxQueueDesc) * adapter->num_rx_queues;
VMXNET3_RX_RING_MAX_SIZE)
return -EINVAL;
+ /* if adapter not yet initialized, do nothing */
+ if (adapter->rx_buf_per_pkt == 0) {
+ netdev_err(netdev, "adapter not completely initialized, "
+ "ring size cannot be changed yet\n");
+ return -EOPNOTSUPP;
+ }
/* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */
new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) &
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.1.30.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00
+#define VMXNET3_DRIVER_VERSION_NUM 0x01011E00
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
iph->ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
tunnel_ip_select_ident(skb, old_iph, &rt->dst);
+ nf_reset(skb);
+
vxlan_set_owner(dev, skb);
/* See iptunnel_xmit() */
static __net_exit void vxlan_exit_net(struct net *net)
{
struct vxlan_net *vn = net_generic(net, vxlan_net_id);
+ struct vxlan_dev *vxlan;
+ unsigned h;
+
+ rtnl_lock();
+ for (h = 0; h < VNI_HASH_SIZE; ++h)
+ hlist_for_each_entry(vxlan, &vn->vni_list[h], hlist)
+ dev_close(vxlan->dev);
+ rtnl_unlock();
if (vn->sock) {
sk_release_kernel(vn->sock->sk);
AR_PHY_AGC_CONTROL_FLTR_CAL |
AR_PHY_AGC_CONTROL_PKDET_CAL;
+ /* Use chip chainmask only for calibration */
ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
if (rtt) {
ar9003_hw_rtt_disable(ah);
}
+ /* Revert chainmask to runtime parameters */
+ ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
+
/* Initialize list pointers */
ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
int i;
bool needreset = false;
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
- if (ATH_TXQ_SETUP(sc, i)) {
- txq = &sc->tx.txq[i];
- ath_txq_lock(sc, txq);
- if (txq->axq_depth) {
- if (txq->axq_tx_inprogress) {
- needreset = true;
- ath_txq_unlock(sc, txq);
- break;
- } else {
- txq->axq_tx_inprogress = true;
- }
+ for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+ txq = sc->tx.txq_map[i];
+
+ ath_txq_lock(sc, txq);
+ if (txq->axq_depth) {
+ if (txq->axq_tx_inprogress) {
+ needreset = true;
+ ath_txq_unlock(sc, txq);
+ break;
+ } else {
+ txq->axq_tx_inprogress = true;
}
- ath_txq_unlock_complete(sc, txq);
}
+ ath_txq_unlock_complete(sc, txq);
+ }
if (needreset) {
ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
dma_addr_t txcmd_phys;
int txq_id = skb_get_queue_mapping(skb);
u16 len, idx, hdr_len;
+ u16 firstlen, secondlen;
u8 id;
u8 unicast;
u8 sta_id;
len =
sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
hdr_len;
- len = (len + 3) & ~3;
+ firstlen = (len + 3) & ~3;
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys =
- pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE);
+ pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
+ PCI_DMA_TODEVICE);
if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
goto drop_unlock;
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
- len = skb->len - hdr_len;
- if (len) {
+ secondlen = skb->len - hdr_len;
+ if (secondlen > 0) {
phys_addr =
- pci_map_single(il->pci_dev, skb->data + hdr_len, len,
+ pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
PCI_DMA_TODEVICE);
if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
goto drop_unlock;
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
- il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0);
+ il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, len);
- if (len)
- il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0,
- U32_PAD(len));
+ dma_unmap_len_set(out_meta, len, firstlen);
+ if (secondlen > 0)
+ il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
+ U32_PAD(secondlen));
if (!ieee80211_has_morefrags(hdr->frame_control)) {
txq->need_update = 1;
sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : "");
if (!(flags & CMD_ASYNC)) {
- cmd.flags |= CMD_WANT_SKB | CMD_WANT_HCMD;
+ cmd.flags |= CMD_WANT_SKB;
might_sleep();
}
__entry->flags = cmd->flags;
memcpy(__get_dynamic_array(hcmd), hdr, sizeof(*hdr));
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
if (!cmd->len[i])
continue;
memcpy((u8 *)__get_dynamic_array(hcmd) + offset,
/* shared module parameters */
struct iwl_mod_params iwlwifi_mod_params = {
- .amsdu_size_8K = 1,
.restart_fw = 1,
.plcp_check = true,
.bt_coex_active = true,
"disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K,
int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)");
module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
* @sw_crypto: using hardware encryption, default = 0
* @disable_11n: disable 11n capabilities, default = 0,
* use IWL_DISABLE_HT_* constants
- * @amsdu_size_8K: enable 8K amsdu size, default = 1
+ * @amsdu_size_8K: enable 8K amsdu size, default = 0
* @restart_fw: restart firmware, default = 1
* @plcp_check: enable plcp health check, default = true
* @wd_disable: enable stuck queue check, default = 0
* @CMD_ASYNC: Return right away and don't want for the response
* @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the
* response. The caller needs to call iwl_free_resp when done.
- * @CMD_WANT_HCMD: The caller needs to get the HCMD that was sent in the
- * response handler. Chunks flagged by %IWL_HCMD_DFL_NOCOPY won't be
- * copied. The pointer passed to the response handler is in the transport
- * ownership and don't need to be freed by the op_mode. This also means
- * that the pointer is invalidated after the op_mode's handler returns.
* @CMD_ON_DEMAND: This command is sent by the test mode pipe.
*/
enum CMD_MODE {
CMD_SYNC = 0,
CMD_ASYNC = BIT(0),
CMD_WANT_SKB = BIT(1),
- CMD_WANT_HCMD = BIT(2),
- CMD_ON_DEMAND = BIT(3),
+ CMD_ON_DEMAND = BIT(2),
};
#define DEF_CMD_PAYLOAD_SIZE 320
#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
-#define IWL_MAX_CMD_TFDS 2
+/*
+ * number of transfer buffers (fragments) per transmit frame descriptor;
+ * this is just the driver's idea, the hardware supports 20
+ */
+#define IWL_MAX_CMD_TBS_PER_TFD 2
/**
* struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
* @id: id of the host command
*/
struct iwl_host_cmd {
- const void *data[IWL_MAX_CMD_TFDS];
+ const void *data[IWL_MAX_CMD_TBS_PER_TFD];
struct iwl_rx_packet *resp_pkt;
unsigned long _rx_page_addr;
u32 _rx_page_order;
int handler_status;
u32 flags;
- u16 len[IWL_MAX_CMD_TFDS];
- u8 dataflags[IWL_MAX_CMD_TFDS];
+ u16 len[IWL_MAX_CMD_TBS_PER_TFD];
+ u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
u8 id;
};
#define IWL_RX_INFO_PHY_CNT 8
#define IWL_RX_INFO_AGC_IDX 1
#define IWL_RX_INFO_RSSI_AB_IDX 2
-#define IWL_RX_INFO_RSSI_C_IDX 3
-#define IWL_OFDM_AGC_DB_MSK 0xfe00
-#define IWL_OFDM_AGC_DB_POS 9
+#define IWL_OFDM_AGC_A_MSK 0x0000007f
+#define IWL_OFDM_AGC_A_POS 0
+#define IWL_OFDM_AGC_B_MSK 0x00003f80
+#define IWL_OFDM_AGC_B_POS 7
+#define IWL_OFDM_AGC_CODE_MSK 0x3fe00000
+#define IWL_OFDM_AGC_CODE_POS 20
#define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff
-#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWL_OFDM_RSSI_A_POS 0
+#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
+#define IWL_OFDM_RSSI_ALLBAND_A_POS 8
#define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000
-#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWL_OFDM_RSSI_B_POS 16
-#define IWL_OFDM_RSSI_INBAND_C_MSK 0x00ff
-#define IWL_OFDM_RSSI_ALLBAND_C_MSK 0xff00
-#define IWL_OFDM_RSSI_C_POS 0
+#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
+#define IWL_OFDM_RSSI_ALLBAND_B_POS 24
/**
* struct iwl_rx_phy_info - phy info
#define UCODE_VALID_OK cpu_to_le32(0x1)
/* Default calibration values for WkP - set to INIT image w/o running */
-static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f,
- 0x00, 0x18, 0x00 };
-static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
- 0x7f, 0x7f, 0x7f };
-static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 };
-static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00,
- 0x00 };
-static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 };
static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 };
-static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 };
struct iwl_calib_default_data {
u16 size;
#define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf}
static const struct iwl_calib_default_data wkp_calib_default_data[12] = {
- [5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc),
- [6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter),
- [7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo),
- [8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq),
[9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew),
- [10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq),
[11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew),
};
return 0;
}
-#define IWL_HW_REV_ID_RAINBOW 0x2
-#define IWL_PROJ_TYPE_LHP 0x5
-
-static u32 iwl_mvm_build_phy_cfg(struct iwl_mvm *mvm)
-{
- struct iwl_nvm_data *data = mvm->nvm_data;
- /* Temp calls to static definitions, will be changed to CSR calls */
- u8 hw_rev_id = IWL_HW_REV_ID_RAINBOW;
- u8 project_type = IWL_PROJ_TYPE_LHP;
-
- return data->radio_cfg_dash | (data->radio_cfg_step << 2) |
- (hw_rev_id << 4) | ((project_type & 0x7f) << 6) |
- (data->valid_tx_ant << 16) | (data->valid_rx_ant << 20);
-}
static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
{
enum iwl_ucode_type ucode_type = mvm->cur_ucode;
/* Set parameters */
- phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_build_phy_cfg(mvm));
+ phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config);
phy_cfg_cmd.calib_control.event_trigger =
mvm->fw->default_calib[ucode_type].event_trigger;
phy_cfg_cmd.calib_control.flow_trigger =
sizeof(phy_cfg_cmd), &phy_cfg_cmd);
}
-/* Starting with the new PHY DB implementation - New calibs are enabled */
-/* Value - 0x405e7 */
-#define IWL_CALIB_DEFAULT_FLOW_INIT (IWL_CALIB_CFG_XTAL_IDX |\
- IWL_CALIB_CFG_TEMPERATURE_IDX |\
- IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
- IWL_CALIB_CFG_DC_IDX |\
- IWL_CALIB_CFG_BB_FILTER_IDX |\
- IWL_CALIB_CFG_LO_LEAKAGE_IDX |\
- IWL_CALIB_CFG_TX_IQ_IDX |\
- IWL_CALIB_CFG_RX_IQ_IDX |\
- IWL_CALIB_CFG_AGC_IDX)
-
-#define IWL_CALIB_DEFAULT_EVENT_INIT 0x0
-
-/* Value 0x41567 */
-#define IWL_CALIB_DEFAULT_FLOW_RUN (IWL_CALIB_CFG_XTAL_IDX |\
- IWL_CALIB_CFG_TEMPERATURE_IDX |\
- IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
- IWL_CALIB_CFG_BB_FILTER_IDX |\
- IWL_CALIB_CFG_DC_IDX |\
- IWL_CALIB_CFG_TX_IQ_IDX |\
- IWL_CALIB_CFG_RX_IQ_IDX |\
- IWL_CALIB_CFG_SENSITIVITY_IDX |\
- IWL_CALIB_CFG_AGC_IDX)
-
-#define IWL_CALIB_DEFAULT_EVENT_RUN (IWL_CALIB_CFG_XTAL_IDX |\
- IWL_CALIB_CFG_TEMPERATURE_IDX |\
- IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
- IWL_CALIB_CFG_TX_PWR_IDX |\
- IWL_CALIB_CFG_DC_IDX |\
- IWL_CALIB_CFG_TX_IQ_IDX |\
- IWL_CALIB_CFG_SENSITIVITY_IDX)
-
-/*
- * Sets the calibrations trigger values that will be sent to the FW for runtime
- * and init calibrations.
- * The ones given in the FW TLV are not correct.
- */
-static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm)
-{
- struct iwl_tlv_calib_ctrl default_calib;
-
- /*
- * WkP FW TLV calib bits are wrong, overwrite them.
- * This defines the dynamic calibrations which are implemented in the
- * uCode both for init(flow) calculation and event driven calibs.
- */
-
- /* Init Image */
- default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT);
- default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT);
-
- if (default_calib.event_trigger !=
- mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger)
- IWL_ERR(mvm,
- "Updating the event calib for INIT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger,
- default_calib.event_trigger);
- if (default_calib.flow_trigger !=
- mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger)
- IWL_ERR(mvm,
- "Updating the flow calib for INIT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger,
- default_calib.flow_trigger);
-
- memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT],
- &default_calib, sizeof(struct iwl_tlv_calib_ctrl));
- IWL_ERR(mvm,
- "Setting uCode init calibrations event 0x%x, trigger 0x%x\n",
- default_calib.event_trigger,
- default_calib.flow_trigger);
-
- /* Run time image */
- default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN);
- default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN);
-
- if (default_calib.event_trigger !=
- mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger)
- IWL_ERR(mvm,
- "Updating the event calib for RT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger,
- default_calib.event_trigger);
- if (default_calib.flow_trigger !=
- mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger)
- IWL_ERR(mvm,
- "Updating the flow calib for RT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger,
- default_calib.flow_trigger);
-
- memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR],
- &default_calib, sizeof(struct iwl_tlv_calib_ctrl));
- IWL_ERR(mvm,
- "Setting uCode runtime calibs event 0x%x, trigger 0x%x\n",
- default_calib.event_trigger,
- default_calib.flow_trigger);
-}
-
static int iwl_set_default_calibrations(struct iwl_mvm *mvm)
{
u8 cmd_raw[16]; /* holds the variable size commands */
ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans);
WARN_ON(ret);
- /* Override the calibrations from TLV and the const of fw */
- iwl_set_default_calib_trigger(mvm);
+ /* Send TX valid antennas before triggering calibrations */
+ ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant);
+ if (ret)
+ goto error;
/* WkP doesn't have all calibrations, need to set default values */
if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) {
#define IWL_INVALID_MAC80211_QUEUE 0xff
#define IWL_MVM_MAX_ADDRESSES 2
-#define IWL_RSSI_OFFSET 44
+/* RSSI offset for WkP */
+#define IWL_RSSI_OFFSET 50
enum iwl_mvm_tx_fifo {
IWL_MVM_TX_FIFO_BK = 0,
ieee80211_free_txskb(mvm->hw, skb);
}
-static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
+static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
{
- struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
-
- iwl_mvm_dump_nic_error_log(mvm);
-
iwl_abort_notification_waits(&mvm->notif_wait);
/*
}
}
+static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
+{
+ struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+
+ iwl_mvm_dump_nic_error_log(mvm);
+
+ iwl_mvm_nic_restart(mvm);
+}
+
static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
{
+ struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+
WARN_ON(1);
+ iwl_mvm_nic_restart(mvm);
}
static const struct iwl_op_mode_ops iwl_mvm_ops = {
static int iwl_mvm_calc_rssi(struct iwl_mvm *mvm,
struct iwl_rx_phy_info *phy_info)
{
- u32 rssi_a, rssi_b, rssi_c, max_rssi, agc_db;
+ int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm;
+ int rssi_all_band_a, rssi_all_band_b;
+ u32 agc_a, agc_b, max_agc;
u32 val;
- /* Find max rssi among 3 possible receivers.
+ /* Find max rssi among 2 possible receivers.
* These values are measured by the Digital Signal Processor (DSP).
* They should stay fairly constant even as the signal strength varies,
* if the radio's Automatic Gain Control (AGC) is working right.
* AGC value (see below) will provide the "interesting" info.
*/
+ val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
+ agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS;
+ agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS;
+ max_agc = max_t(u32, agc_a, agc_b);
+
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]);
rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS;
rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS;
- val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_C_IDX]);
- rssi_c = (val & IWL_OFDM_RSSI_INBAND_C_MSK) >> IWL_OFDM_RSSI_C_POS;
-
- val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
- agc_db = (val & IWL_OFDM_AGC_DB_MSK) >> IWL_OFDM_AGC_DB_POS;
+ rssi_all_band_a = (val & IWL_OFDM_RSSI_ALLBAND_A_MSK) >>
+ IWL_OFDM_RSSI_ALLBAND_A_POS;
+ rssi_all_band_b = (val & IWL_OFDM_RSSI_ALLBAND_B_MSK) >>
+ IWL_OFDM_RSSI_ALLBAND_B_POS;
- max_rssi = max_t(u32, rssi_a, rssi_b);
- max_rssi = max_t(u32, max_rssi, rssi_c);
+ /*
+ * dBm = rssi dB - agc dB - constant.
+ * Higher AGC (higher radio gain) means lower signal.
+ */
+ rssi_a_dbm = rssi_a - IWL_RSSI_OFFSET - agc_a;
+ rssi_b_dbm = rssi_b - IWL_RSSI_OFFSET - agc_b;
+ max_rssi_dbm = max_t(int, rssi_a_dbm, rssi_b_dbm);
- IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
- rssi_a, rssi_b, rssi_c, max_rssi, agc_db);
+ IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d Max %d AGCA %d AGCB %d\n",
+ rssi_a_dbm, rssi_b_dbm, max_rssi_dbm, agc_a, agc_b);
- /* dBm = max_rssi dB - agc dB - constant.
- * Higher AGC (higher radio gain) means lower signal. */
- return max_rssi - agc_db - IWL_RSSI_OFFSET;
+ return max_rssi_dbm;
}
/*
u16 txq_id;
int err;
+
+ /*
+ * If mac80211 is cleaning its state, then say that we finished since
+ * our state has been cleared anyway.
+ */
+ if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ return 0;
+ }
+
spin_lock_bh(&mvmsta->lock);
txq_id = tid_data->txq_id;
/* Single frame failure in an AMPDU queue => send BAR */
if (txq_id >= IWL_FIRST_AMPDU_QUEUE &&
- !(info->flags & IEEE80211_TX_STAT_ACK)) {
- /* there must be only one skb in the skb_list */
- WARN_ON_ONCE(skb_freed > 1 ||
- !skb_queue_empty(&skbs));
+ !(info->flags & IEEE80211_TX_STAT_ACK))
info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
- }
/* W/A FW bug: seq_ctl is wrong when the queue is flushed */
if (status == TX_STATUS_FAIL_FIFO_FLUSHED) {
struct iwl_cmd_meta {
/* only for SYNC commands, iff the reply skb is wanted */
struct iwl_host_cmd *source;
-
- DEFINE_DMA_UNMAP_ADDR(mapping);
- DEFINE_DMA_UNMAP_LEN(len);
-
u32 flags;
};
/*
* The FH will write back to the first TB only, so we need
* to copy some data into the buffer regardless of whether
- * it should be mapped or not. This indicates how much to
- * copy, even for HCMDs it must be big enough to fit the
- * DRAM scratch from the TX cmd, at least 16 bytes.
+ * it should be mapped or not. This indicates how big the
+ * first TB must be to include the scratch buffer. Since
+ * the scratch is 4 bytes at offset 12, it's 16 now. If we
+ * make it bigger then allocations will be bigger and copy
+ * slower, so that's probably not useful.
*/
-#define IWL_HCMD_MIN_COPY_SIZE 16
+#define IWL_HCMD_SCRATCHBUF_SIZE 16
struct iwl_pcie_txq_entry {
struct iwl_device_cmd *cmd;
- struct iwl_device_cmd *copy_cmd;
struct sk_buff *skb;
/* buffer to free after command completes */
const void *free_buf;
struct iwl_cmd_meta meta;
};
+struct iwl_pcie_txq_scratch_buf {
+ struct iwl_cmd_header hdr;
+ u8 buf[8];
+ __le32 scratch;
+};
+
/**
* struct iwl_txq - Tx Queue for DMA
* @q: generic Rx/Tx queue descriptor
* @tfds: transmit frame descriptors (DMA memory)
+ * @scratchbufs: start of command headers, including scratch buffers, for
+ * the writeback -- this is DMA memory and an array holding one buffer
+ * for each command on the queue
+ * @scratchbufs_dma: DMA address for the scratchbufs start
* @entries: transmit entries (driver state)
* @lock: queue lock
* @stuck_timer: timer that fires if queue gets stuck
struct iwl_txq {
struct iwl_queue q;
struct iwl_tfd *tfds;
+ struct iwl_pcie_txq_scratch_buf *scratchbufs;
+ dma_addr_t scratchbufs_dma;
struct iwl_pcie_txq_entry *entries;
spinlock_t lock;
struct timer_list stuck_timer;
u8 active;
};
+static inline dma_addr_t
+iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
+{
+ return txq->scratchbufs_dma +
+ sizeof(struct iwl_pcie_txq_scratch_buf) * idx;
+}
+
/**
* struct iwl_trans_pcie - PCIe transport specific data
* @rxq: all the RX queue data
index = SEQ_TO_INDEX(sequence);
cmd_index = get_cmd_index(&txq->q, index);
- if (reclaim) {
- struct iwl_pcie_txq_entry *ent;
- ent = &txq->entries[cmd_index];
- cmd = ent->copy_cmd;
- WARN_ON_ONCE(!cmd && ent->meta.flags & CMD_WANT_HCMD);
- } else {
+ if (reclaim)
+ cmd = txq->entries[cmd_index].cmd;
+ else
cmd = NULL;
- }
err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd);
if (reclaim) {
- /* The original command isn't needed any more */
- kfree(txq->entries[cmd_index].copy_cmd);
- txq->entries[cmd_index].copy_cmd = NULL;
- /* nor is the duplicated part of the command */
kfree(txq->entries[cmd_index].free_buf);
txq->entries[cmd_index].free_buf = NULL;
}
}
for (i = q->read_ptr; i != q->write_ptr;
- i = iwl_queue_inc_wrap(i, q->n_bd)) {
- struct iwl_tx_cmd *tx_cmd =
- (struct iwl_tx_cmd *)txq->entries[i].cmd->payload;
+ i = iwl_queue_inc_wrap(i, q->n_bd))
IWL_ERR(trans, "scratch %d = 0x%08x\n", i,
- get_unaligned_le32(&tx_cmd->scratch));
- }
+ le32_to_cpu(txq->scratchbufs[i].scratch));
iwl_op_mode_nic_error(trans->op_mode);
}
}
static void iwl_pcie_tfd_unmap(struct iwl_trans *trans,
- struct iwl_cmd_meta *meta, struct iwl_tfd *tfd,
- enum dma_data_direction dma_dir)
+ struct iwl_cmd_meta *meta,
+ struct iwl_tfd *tfd)
{
int i;
int num_tbs;
return;
}
- /* Unmap tx_cmd */
- if (num_tbs)
- dma_unmap_single(trans->dev,
- dma_unmap_addr(meta, mapping),
- dma_unmap_len(meta, len),
- DMA_BIDIRECTIONAL);
+ /* first TB is never freed - it's the scratchbuf data */
- /* Unmap chunks, if any. */
for (i = 1; i < num_tbs; i++)
dma_unmap_single(trans->dev, iwl_pcie_tfd_tb_get_addr(tfd, i),
- iwl_pcie_tfd_tb_get_len(tfd, i), dma_dir);
+ iwl_pcie_tfd_tb_get_len(tfd, i),
+ DMA_TO_DEVICE);
tfd->num_tbs = 0;
}
* Does NOT advance any TFD circular buffer read/write indexes
* Does NOT free the TFD itself (which is within circular buffer)
*/
-static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq,
- enum dma_data_direction dma_dir)
+static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq)
{
struct iwl_tfd *tfd_tmp = txq->tfds;
lockdep_assert_held(&txq->lock);
/* We have only q->n_window txq->entries, but we use q->n_bd tfds */
- iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr],
- dma_dir);
+ iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr]);
/* free SKB */
if (txq->entries) {
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
size_t tfd_sz = sizeof(struct iwl_tfd) * TFD_QUEUE_SIZE_MAX;
+ size_t scratchbuf_sz;
int i;
if (WARN_ON(txq->entries || txq->tfds))
IWL_ERR(trans, "dma_alloc_coherent(%zd) failed\n", tfd_sz);
goto error;
}
+
+ BUILD_BUG_ON(IWL_HCMD_SCRATCHBUF_SIZE != sizeof(*txq->scratchbufs));
+ BUILD_BUG_ON(offsetof(struct iwl_pcie_txq_scratch_buf, scratch) !=
+ sizeof(struct iwl_cmd_header) +
+ offsetof(struct iwl_tx_cmd, scratch));
+
+ scratchbuf_sz = sizeof(*txq->scratchbufs) * slots_num;
+
+ txq->scratchbufs = dma_alloc_coherent(trans->dev, scratchbuf_sz,
+ &txq->scratchbufs_dma,
+ GFP_KERNEL);
+ if (!txq->scratchbufs)
+ goto err_free_tfds;
+
txq->q.id = txq_id;
return 0;
+err_free_tfds:
+ dma_free_coherent(trans->dev, tfd_sz, txq->tfds, txq->q.dma_addr);
error:
if (txq->entries && txq_id == trans_pcie->cmd_queue)
for (i = 0; i < slots_num; i++)
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_txq *txq = &trans_pcie->txq[txq_id];
struct iwl_queue *q = &txq->q;
- enum dma_data_direction dma_dir;
if (!q->n_bd)
return;
- /* In the command queue, all the TBs are mapped as BIDI
- * so unmap them as such.
- */
- if (txq_id == trans_pcie->cmd_queue)
- dma_dir = DMA_BIDIRECTIONAL;
- else
- dma_dir = DMA_TO_DEVICE;
-
spin_lock_bh(&txq->lock);
while (q->write_ptr != q->read_ptr) {
- iwl_pcie_txq_free_tfd(trans, txq, dma_dir);
+ iwl_pcie_txq_free_tfd(trans, txq);
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
}
spin_unlock_bh(&txq->lock);
if (txq_id == trans_pcie->cmd_queue)
for (i = 0; i < txq->q.n_window; i++) {
kfree(txq->entries[i].cmd);
- kfree(txq->entries[i].copy_cmd);
kfree(txq->entries[i].free_buf);
}
dma_free_coherent(dev, sizeof(struct iwl_tfd) *
txq->q.n_bd, txq->tfds, txq->q.dma_addr);
txq->q.dma_addr = 0;
+
+ dma_free_coherent(dev,
+ sizeof(*txq->scratchbufs) * txq->q.n_window,
+ txq->scratchbufs, txq->scratchbufs_dma);
}
kfree(txq->entries);
iwl_pcie_txq_inval_byte_cnt_tbl(trans, txq);
- iwl_pcie_txq_free_tfd(trans, txq, DMA_TO_DEVICE);
+ iwl_pcie_txq_free_tfd(trans, txq);
}
iwl_pcie_txq_progress(trans_pcie, txq);
void *dup_buf = NULL;
dma_addr_t phys_addr;
int idx;
- u16 copy_size, cmd_size, dma_size;
+ u16 copy_size, cmd_size, scratch_size;
bool had_nocopy = false;
int i;
u32 cmd_pos;
- const u8 *cmddata[IWL_MAX_CMD_TFDS];
- u16 cmdlen[IWL_MAX_CMD_TFDS];
+ const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD];
+ u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD];
copy_size = sizeof(out_cmd->hdr);
cmd_size = sizeof(out_cmd->hdr);
/* need one for the header if the first is NOCOPY */
- BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1);
+ BUILD_BUG_ON(IWL_MAX_CMD_TBS_PER_TFD > IWL_NUM_OF_TBS - 1);
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
cmddata[i] = cmd->data[i];
cmdlen[i] = cmd->len[i];
if (!cmd->len[i])
continue;
- /* need at least IWL_HCMD_MIN_COPY_SIZE copied */
- if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
- int copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
+ /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
+ if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) {
+ int copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size;
if (copy > cmdlen[i])
copy = cmdlen[i];
/* and copy the data that needs to be copied */
cmd_pos = offsetof(struct iwl_device_cmd, payload);
copy_size = sizeof(out_cmd->hdr);
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
int copy = 0;
if (!cmd->len)
continue;
- /* need at least IWL_HCMD_MIN_COPY_SIZE copied */
- if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
- copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
+ /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
+ if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) {
+ copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size;
if (copy > cmd->len[i])
copy = cmd->len[i];
}
}
- WARN_ON_ONCE(txq->entries[idx].copy_cmd);
-
- /*
- * since out_cmd will be the source address of the FH, it will write
- * the retry count there. So when the user needs to receivce the HCMD
- * that corresponds to the response in the response handler, it needs
- * to set CMD_WANT_HCMD.
- */
- if (cmd->flags & CMD_WANT_HCMD) {
- txq->entries[idx].copy_cmd =
- kmemdup(out_cmd, cmd_pos, GFP_ATOMIC);
- if (unlikely(!txq->entries[idx].copy_cmd)) {
- idx = -ENOMEM;
- goto out;
- }
- }
-
IWL_DEBUG_HC(trans,
"Sending command %s (#%x), seq: 0x%04X, %d bytes at %d[%d]:%d\n",
get_cmd_string(trans_pcie, out_cmd->hdr.cmd),
out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
cmd_size, q->write_ptr, idx, trans_pcie->cmd_queue);
- /*
- * If the entire command is smaller than IWL_HCMD_MIN_COPY_SIZE, we must
- * still map at least that many bytes for the hardware to write back to.
- * We have enough space, so that's not a problem.
- */
- dma_size = max_t(u16, copy_size, IWL_HCMD_MIN_COPY_SIZE);
+ /* start the TFD with the scratchbuf */
+ scratch_size = min_t(int, copy_size, IWL_HCMD_SCRATCHBUF_SIZE);
+ memcpy(&txq->scratchbufs[q->write_ptr], &out_cmd->hdr, scratch_size);
+ iwl_pcie_txq_build_tfd(trans, txq,
+ iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr),
+ scratch_size, 1);
+
+ /* map first command fragment, if any remains */
+ if (copy_size > scratch_size) {
+ phys_addr = dma_map_single(trans->dev,
+ ((u8 *)&out_cmd->hdr) + scratch_size,
+ copy_size - scratch_size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(trans->dev, phys_addr)) {
+ iwl_pcie_tfd_unmap(trans, out_meta,
+ &txq->tfds[q->write_ptr]);
+ idx = -ENOMEM;
+ goto out;
+ }
- phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, dma_size,
- DMA_BIDIRECTIONAL);
- if (unlikely(dma_mapping_error(trans->dev, phys_addr))) {
- idx = -ENOMEM;
- goto out;
+ iwl_pcie_txq_build_tfd(trans, txq, phys_addr,
+ copy_size - scratch_size, 0);
}
- dma_unmap_addr_set(out_meta, mapping, phys_addr);
- dma_unmap_len_set(out_meta, len, dma_size);
-
- iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1);
-
/* map the remaining (adjusted) nocopy/dup fragments */
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
const void *data = cmddata[i];
if (!cmdlen[i])
if (cmd->dataflags[i] & IWL_HCMD_DFL_DUP)
data = dup_buf;
phys_addr = dma_map_single(trans->dev, (void *)data,
- cmdlen[i], DMA_BIDIRECTIONAL);
+ cmdlen[i], DMA_TO_DEVICE);
if (dma_mapping_error(trans->dev, phys_addr)) {
iwl_pcie_tfd_unmap(trans, out_meta,
- &txq->tfds[q->write_ptr],
- DMA_BIDIRECTIONAL);
+ &txq->tfds[q->write_ptr]);
idx = -ENOMEM;
goto out;
}
cmd = txq->entries[cmd_index].cmd;
meta = &txq->entries[cmd_index].meta;
- iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index], DMA_BIDIRECTIONAL);
+ iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index]);
/* Input error checking is done when commands are added to queue. */
if (meta->flags & CMD_WANT_SKB) {
struct iwl_cmd_meta *out_meta;
struct iwl_txq *txq;
struct iwl_queue *q;
- dma_addr_t phys_addr = 0;
- dma_addr_t txcmd_phys;
- dma_addr_t scratch_phys;
- u16 len, firstlen, secondlen;
+ dma_addr_t tb0_phys, tb1_phys, scratch_phys;
+ void *tb1_addr;
+ u16 len, tb1_len, tb2_len;
u8 wait_write_ptr = 0;
__le16 fc = hdr->frame_control;
u8 hdr_len = ieee80211_hdrlen(fc);
cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
INDEX_TO_SEQ(q->write_ptr)));
+ tb0_phys = iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr);
+ scratch_phys = tb0_phys + sizeof(struct iwl_cmd_header) +
+ offsetof(struct iwl_tx_cmd, scratch);
+
+ tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
+ tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
+
/* Set up first empty entry in queue's array of Tx/cmd buffers */
out_meta = &txq->entries[q->write_ptr].meta;
/*
- * Use the first empty entry in this queue's command buffer array
- * to contain the Tx command and MAC header concatenated together
- * (payload data will be in another buffer).
- * Size of this varies, due to varying MAC header length.
- * If end is not dword aligned, we'll have 2 extra bytes at the end
- * of the MAC header (device reads on dword boundaries).
- * We'll tell device about this padding later.
+ * The second TB (tb1) points to the remainder of the TX command
+ * and the 802.11 header - dword aligned size
+ * (This calculation modifies the TX command, so do it before the
+ * setup of the first TB)
*/
- len = sizeof(struct iwl_tx_cmd) +
- sizeof(struct iwl_cmd_header) + hdr_len;
- firstlen = (len + 3) & ~3;
+ len = sizeof(struct iwl_tx_cmd) + sizeof(struct iwl_cmd_header) +
+ hdr_len - IWL_HCMD_SCRATCHBUF_SIZE;
+ tb1_len = (len + 3) & ~3;
/* Tell NIC about any 2-byte padding after MAC header */
- if (firstlen != len)
+ if (tb1_len != len)
tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
- /* Physical address of this Tx command's header (not MAC header!),
- * within command buffer array. */
- txcmd_phys = dma_map_single(trans->dev,
- &dev_cmd->hdr, firstlen,
- DMA_BIDIRECTIONAL);
- if (unlikely(dma_mapping_error(trans->dev, txcmd_phys)))
- goto out_err;
- dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, firstlen);
+ /* The first TB points to the scratchbuf data - min_copy bytes */
+ memcpy(&txq->scratchbufs[q->write_ptr], &dev_cmd->hdr,
+ IWL_HCMD_SCRATCHBUF_SIZE);
+ iwl_pcie_txq_build_tfd(trans, txq, tb0_phys,
+ IWL_HCMD_SCRATCHBUF_SIZE, 1);
- if (!ieee80211_has_morefrags(fc)) {
- txq->need_update = 1;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
+ /* there must be data left over for TB1 or this code must be changed */
+ BUILD_BUG_ON(sizeof(struct iwl_tx_cmd) < IWL_HCMD_SCRATCHBUF_SIZE);
- /* Set up TFD's 2nd entry to point directly to remainder of skb,
- * if any (802.11 null frames have no payload). */
- secondlen = skb->len - hdr_len;
- if (secondlen > 0) {
- phys_addr = dma_map_single(trans->dev, skb->data + hdr_len,
- secondlen, DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(trans->dev, phys_addr))) {
- dma_unmap_single(trans->dev,
- dma_unmap_addr(out_meta, mapping),
- dma_unmap_len(out_meta, len),
- DMA_BIDIRECTIONAL);
+ /* map the data for TB1 */
+ tb1_addr = ((u8 *)&dev_cmd->hdr) + IWL_HCMD_SCRATCHBUF_SIZE;
+ tb1_phys = dma_map_single(trans->dev, tb1_addr, tb1_len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(trans->dev, tb1_phys)))
+ goto out_err;
+ iwl_pcie_txq_build_tfd(trans, txq, tb1_phys, tb1_len, 0);
+
+ /*
+ * Set up TFD's third entry to point directly to remainder
+ * of skb, if any (802.11 null frames have no payload).
+ */
+ tb2_len = skb->len - hdr_len;
+ if (tb2_len > 0) {
+ dma_addr_t tb2_phys = dma_map_single(trans->dev,
+ skb->data + hdr_len,
+ tb2_len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(trans->dev, tb2_phys))) {
+ iwl_pcie_tfd_unmap(trans, out_meta,
+ &txq->tfds[q->write_ptr]);
goto out_err;
}
+ iwl_pcie_txq_build_tfd(trans, txq, tb2_phys, tb2_len, 0);
}
- /* Attach buffers to TFD */
- iwl_pcie_txq_build_tfd(trans, txq, txcmd_phys, firstlen, 1);
- if (secondlen > 0)
- iwl_pcie_txq_build_tfd(trans, txq, phys_addr, secondlen, 0);
-
- scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
- offsetof(struct iwl_tx_cmd, scratch);
-
- /* take back ownership of DMA buffer to enable update */
- dma_sync_single_for_cpu(trans->dev, txcmd_phys, firstlen,
- DMA_BIDIRECTIONAL);
- tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
- tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
-
/* Set up entry for this TFD in Tx byte-count array */
iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len));
- dma_sync_single_for_device(trans->dev, txcmd_phys, firstlen,
- DMA_BIDIRECTIONAL);
-
trace_iwlwifi_dev_tx(trans->dev, skb,
&txq->tfds[txq->q.write_ptr],
sizeof(struct iwl_tfd),
- &dev_cmd->hdr, firstlen,
- skb->data + hdr_len, secondlen);
+ &dev_cmd->hdr, IWL_HCMD_SCRATCHBUF_SIZE + tb1_len,
+ skb->data + hdr_len, tb2_len);
trace_iwlwifi_dev_tx_data(trans->dev, skb,
- skb->data + hdr_len, secondlen);
+ skb->data + hdr_len, tb2_len);
+
+ if (!ieee80211_has_morefrags(fc)) {
+ txq->need_update = 1;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
/* start timer if queue currently empty */
if (txq->need_update && q->read_ptr == q->write_ptr &&
return -1;
}
+ cmd_code = le16_to_cpu(host_cmd->command);
+ cmd_size = le16_to_cpu(host_cmd->size);
+
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_RESET &&
+ cmd_code != HostCmd_CMD_FUNC_SHUTDOWN &&
+ cmd_code != HostCmd_CMD_FUNC_INIT) {
+ dev_err(adapter->dev,
+ "DNLD_CMD: FW in reset state, ignore cmd %#x\n",
+ cmd_code);
+ mwifiex_complete_cmd(adapter, cmd_node);
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ return -1;
+ }
+
/* Set command sequence number */
adapter->seq_num++;
host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
adapter->curr_cmd = cmd_node;
spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
- cmd_code = le16_to_cpu(host_cmd->command);
- cmd_size = le16_to_cpu(host_cmd->size);
-
/* Adjust skb length */
if (cmd_node->cmd_skb->len > cmd_size)
/*
ret = mwifiex_send_cmd_async(priv, cmd_no, cmd_action, cmd_oid,
data_buf);
- if (!ret)
- ret = mwifiex_wait_queue_complete(adapter);
return ret;
}
if (cmd_no == HostCmd_CMD_802_11_SCAN) {
mwifiex_queue_scan_cmd(priv, cmd_node);
} else {
- adapter->cmd_queued = cmd_node;
mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
queue_work(adapter->workqueue, &adapter->main_work);
+ if (cmd_node->wait_q_enabled)
+ ret = mwifiex_wait_queue_complete(adapter, cmd_node);
}
return ret;
return ret;
}
+ /* cancel current command */
+ if (adapter->curr_cmd) {
+ dev_warn(adapter->dev, "curr_cmd is still in processing\n");
+ del_timer(&adapter->cmd_timer);
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+ adapter->curr_cmd = NULL;
+ }
+
/* shut down mwifiex */
dev_dbg(adapter->dev, "info: shutdown mwifiex...\n");
adhoc_join->bss_descriptor.bssid,
adhoc_join->bss_descriptor.ssid);
- for (i = 0; bss_desc->supported_rates[i] &&
- i < MWIFIEX_SUPPORTED_RATES;
- i++)
- ;
+ for (i = 0; i < MWIFIEX_SUPPORTED_RATES &&
+ bss_desc->supported_rates[i]; i++)
+ ;
rates_size = i;
/* Copy Data Rates from the Rates recorded in scan response */
u16 cmd_wait_q_required;
struct mwifiex_wait_queue cmd_wait_q;
u8 scan_wait_q_woken;
- struct cmd_ctrl_node *cmd_queued;
spinlock_t queue_lock; /* lock for tx queues */
struct completion fw_load;
u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
struct mwifiex_multicast_list *mcast_list);
int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
struct net_device *dev);
-int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter);
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_queued);
int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
struct cfg80211_ssid *req_ssid);
int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type);
list_del(&cmd_node->list);
spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
flags);
- adapter->cmd_queued = cmd_node;
mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
true);
queue_work(adapter->workqueue, &adapter->main_work);
+
+ /* Perform internal scan synchronously */
+ if (!priv->scan_request)
+ mwifiex_wait_queue_complete(adapter, cmd_node);
} else {
spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
flags);
/* Normal scan */
ret = mwifiex_scan_networks(priv, NULL);
- if (!ret)
- ret = mwifiex_wait_queue_complete(priv->adapter);
-
up(&priv->async_sem);
return ret;
* This function waits on a cmd wait queue. It also cancels the pending
* request after waking up, in case of errors.
*/
-int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_queued)
{
int status;
- struct cmd_ctrl_node *cmd_queued;
-
- if (!adapter->cmd_queued)
- return 0;
-
- cmd_queued = adapter->cmd_queued;
- adapter->cmd_queued = NULL;
dev_dbg(adapter->dev, "cmd pending\n");
atomic_inc(&adapter->cmd_pending);
config RT2800PCI
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
- depends on PCI || RALINK_RT288X || RALINK_RT305X
+ depends on PCI || SOC_RT288X || SOC_RT305X
select RT2800_LIB
select RT2X00_LIB_PCI if PCI
- select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X
+ select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
}
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
{
void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
{
return -ENOMEM;
}
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
#ifdef CONFIG_PCI
static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
#endif /* CONFIG_PCI */
MODULE_LICENSE("GPL");
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
static int rt2800soc_probe(struct platform_device *pdev)
{
return rt2x00soc_probe(pdev, &rt2800pci_ops);
.suspend = rt2x00soc_suspend,
.resume = rt2x00soc_resume,
};
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
#ifdef CONFIG_PCI
static int rt2800pci_probe(struct pci_dev *pci_dev,
{
int ret = 0;
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
ret = platform_driver_register(&rt2800soc_driver);
if (ret)
return ret;
#ifdef CONFIG_PCI
ret = pci_register_driver(&rt2800pci_driver);
if (ret) {
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
return ret;
#ifdef CONFIG_PCI
pci_unregister_driver(&rt2800pci_driver);
#endif
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
}
}
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
-{
- /* dummy routine needed for callback from rtl_op_configure_filter() */
-}
-
-/*========================================================================== */
-
-static void _rtl92cu_set_check_bssid(struct ieee80211_hw *hw,
- enum nl80211_iftype type)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
- struct rtl_phy *rtlphy = &(rtlpriv->phy);
- u8 filterout_non_associated_bssid = false;
+ u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
- switch (type) {
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_STATION:
- filterout_non_associated_bssid = true;
- break;
- case NL80211_IFTYPE_UNSPECIFIED:
- case NL80211_IFTYPE_AP:
- default:
- break;
- }
- if (filterout_non_associated_bssid) {
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ if (check_bssid) {
+ u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
- switch (rtlphy->current_io_type) {
- case IO_CMD_RESUME_DM_BY_SCAN:
- reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
- rtlpriv->cfg->ops->set_hw_reg(hw,
- HW_VAR_RCR, (u8 *)(®_rcr));
- /* enable update TSF */
- _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
- break;
- case IO_CMD_PAUSE_DM_BY_SCAN:
- reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
- rtlpriv->cfg->ops->set_hw_reg(hw,
- HW_VAR_RCR, (u8 *)(®_rcr));
- /* disable update TSF */
- _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
- break;
- }
+ reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+ tmp = BIT(4);
} else {
- reg_rcr |= (RCR_CBSSID);
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, 0, (BIT(4)|BIT(5)));
+ reg_rcr |= RCR_CBSSID;
+ tmp = BIT(4) | BIT(5);
}
- } else if (filterout_non_associated_bssid == false) {
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
+ (u8 *) (®_rcr));
+ _rtl92cu_set_bcn_ctrl_reg(hw, 0, tmp);
+ } else {
+ u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
- reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
+ reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+ tmp = BIT(4);
} else {
- reg_rcr &= (~RCR_CBSSID);
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, (BIT(4)|BIT(5)), 0);
+ reg_rcr &= ~RCR_CBSSID;
+ tmp = BIT(4) | BIT(5);
}
+ reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_RCR, (u8 *) (®_rcr));
+ _rtl92cu_set_bcn_ctrl_reg(hw, tmp, 0);
}
}
+/*========================================================================== */
+
int rtl92cu_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
if (_rtl92cu_set_media_status(hw, type))
return -EOPNOTSUPP;
- _rtl92cu_set_check_bssid(hw, type);
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92cu_set_check_bssid(hw, true);
+ } else {
+ rtl92cu_set_check_bssid(hw, false);
+ }
+
return 0;
}
(shortgi_rate << 4) | (shortgi_rate);
}
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
- RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
- rtl_read_dword(rtlpriv, REG_ARFR0));
}
void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
if (unlikely(!_urb)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Can't allocate urb. Drop skb!\n");
+ kfree_skb(skb);
return;
}
_rtl_submit_tx_urb(hw, _urb);
return min((size_t)(image - rom), size);
}
+static loff_t pci_find_rom(struct pci_dev *pdev, size_t *size)
+{
+ struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
+ loff_t start;
+
+ /* assign the ROM an address if it doesn't have one */
+ if (res->parent == NULL && pci_assign_resource(pdev, PCI_ROM_RESOURCE))
+ return 0;
+ start = pci_resource_start(pdev, PCI_ROM_RESOURCE);
+ *size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
+
+ if (*size == 0)
+ return 0;
+
+ /* Enable ROM space decodes */
+ if (pci_enable_rom(pdev))
+ return 0;
+
+ return start;
+}
+
/**
* pci_map_rom - map a PCI ROM to kernel space
* @pdev: pointer to pci device struct
void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
{
struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
- loff_t start;
+ loff_t start = 0;
void __iomem *rom;
- /*
- * Some devices may provide ROMs via a source other than the BAR
- */
- if (pdev->rom && pdev->romlen) {
- *size = pdev->romlen;
- return phys_to_virt(pdev->rom);
/*
* IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
* memory map if the VGA enable bit of the Bridge Control register is
* set for embedded VGA.
*/
- } else if (res->flags & IORESOURCE_ROM_SHADOW) {
+ if (res->flags & IORESOURCE_ROM_SHADOW) {
/* primary video rom always starts here */
start = (loff_t)0xC0000;
*size = 0x20000; /* cover C000:0 through E000:0 */
return (void __iomem *)(unsigned long)
pci_resource_start(pdev, PCI_ROM_RESOURCE);
} else {
- /* assign the ROM an address if it doesn't have one */
- if (res->parent == NULL &&
- pci_assign_resource(pdev,PCI_ROM_RESOURCE))
- return NULL;
- start = pci_resource_start(pdev, PCI_ROM_RESOURCE);
- *size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
- if (*size == 0)
- return NULL;
-
- /* Enable ROM space decodes */
- if (pci_enable_rom(pdev))
- return NULL;
+ start = pci_find_rom(pdev, size);
}
}
+ /*
+ * Some devices may provide ROMs via a source other than the BAR
+ */
+ if (!start && pdev->rom && pdev->romlen) {
+ *size = pdev->romlen;
+ return phys_to_virt(pdev->rom);
+ }
+
+ if (!start)
+ return NULL;
+
rom = ioremap(start, *size);
if (!rom) {
/* restore enable if ioremap fails */
/* special soc specific control */
if (ctrl->mpp_get || ctrl->mpp_set) {
- if (!ctrl->name || !ctrl->mpp_set || !ctrl->mpp_set) {
+ if (!ctrl->name || !ctrl->mpp_get || !ctrl->mpp_set) {
dev_err(&pdev->dev, "wrong soc control info\n");
return -EINVAL;
}
static int pinconf_dbg_state_print(struct seq_file *s, void *d)
{
if (strlen(dbg_state_name))
- seq_printf(s, "%s\n", dbg_pinname);
+ seq_printf(s, "%s\n", dbg_state_name);
else
seq_printf(s, "No pin state set\n");
return 0;
* pin config.
*/
-#ifdef CONFIG_GENERIC_PINCONF
+#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_DEBUG_FS)
void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin);
}
/* check if pin use AlternateFunction register */
- if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED))
+ if ((af.alt_bit1 == UNUSED) && (af.alt_bit2 == UNUSED))
return mode;
/*
* if pin GPIOSEL bit is set and pin supports alternate function,
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/pinctrl/machine.h>
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
-#include <asm/mach/irq.h>
-
#include <mach/hardware.h>
#include <mach/at91_pio.h>
}
#ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
{
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
unsigned bank = at91_gpio->pioc_idx;
+ unsigned mask = 1 << d->hwirq;
if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
+ if (state)
+ wakeups[bank] |= mask;
+ else
+ wakeups[bank] &= ~mask;
+
irq_set_irq_wake(at91_gpio->pioc_virq, state);
return 0;
}
+
+void at91_pinctrl_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ backups[i] = __raw_readl(pio + PIO_IMR);
+ __raw_writel(backups[i], pio + PIO_IDR);
+ __raw_writel(wakeups[i], pio + PIO_IER);
+
+ if (!wakeups[i]) {
+ clk_unprepare(gpio_chips[i]->clock);
+ clk_disable(gpio_chips[i]->clock);
+ } else {
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n",
+ 'A'+i, wakeups[i]);
+ }
+ }
+}
+
+void at91_pinctrl_gpio_resume(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ if (!wakeups[i]) {
+ if (clk_prepare(gpio_chips[i]->clock) == 0)
+ clk_enable(gpio_chips[i]->clock);
+ }
+
+ __raw_writel(wakeups[i], pio + PIO_IDR);
+ __raw_writel(backups[i], pio + PIO_IER);
+ }
+}
+
#else
#define gpio_irq_set_wake NULL
-#endif
+#endif /* CONFIG_PM */
static struct irq_chip gpio_irqchip = {
.name = "GPIO",
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/of_irq.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
-#include <asm/mach/irq.h>
-
#include "pinctrl-samsung.h"
#include "pinctrl-exynos.h"
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
-#include <asm/mach/irq.h>
#include "pinctrl-nomadik.h"
#include "core.h"
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/consumer.h>
#include <linux/bitops.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
-#include <asm/mach/irq.h>
#define DRIVER_NAME "pinmux-sirf"
}
if (!gpio_range) {
+ /*
+ * A pin should not be freed more times than allocated.
+ */
+ if (WARN_ON(!desc->mux_usecount))
+ return NULL;
desc->mux_usecount--;
if (desc->mux_usecount)
return NULL;
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/spinlock.h>
-#include <asm/mach/irq.h>
#define MAX_GPIO_PER_REG 32
#define PIN_OFFSET(pin) (pin % MAX_GPIO_PER_REG)
static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
static void __iomem *at91_rtc_regs;
static int irq;
+static u32 at91_rtc_imr;
/*
* Decode time/date into rtc_time structure
cr = at91_rtc_read(AT91_RTC_CR);
at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
+ at91_rtc_imr |= AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
+ at91_rtc_imr &= ~AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_TIMR,
bin2bcd(tm->tm_sec) << 0
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = at91_alarm_year - 1900;
- alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
+ alrm->enabled = (at91_rtc_imr & AT91_RTC_ALARM)
? 1 : 0;
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
tm.tm_sec = alrm->time.tm_sec;
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
+ at91_rtc_imr &= ~AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_TIMALR,
bin2bcd(tm.tm_sec) << 0
| bin2bcd(tm.tm_min) << 8
if (alrm->enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+ at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
}
if (enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+ at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
- } else
+ } else {
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
+ at91_rtc_imr &= ~AT91_RTC_ALARM;
+ }
return 0;
}
*/
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
{
- unsigned long imr = at91_rtc_read(AT91_RTC_IMR);
-
seq_printf(seq, "update_IRQ\t: %s\n",
- (imr & AT91_RTC_ACKUPD) ? "yes" : "no");
+ (at91_rtc_imr & AT91_RTC_ACKUPD) ? "yes" : "no");
seq_printf(seq, "periodic_IRQ\t: %s\n",
- (imr & AT91_RTC_SECEV) ? "yes" : "no");
+ (at91_rtc_imr & AT91_RTC_SECEV) ? "yes" : "no");
return 0;
}
unsigned int rtsr;
unsigned long events = 0;
- rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR);
+ rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_imr;
if (rtsr) { /* this interrupt is shared! Is it ours? */
if (rtsr & AT91_RTC_ALARM)
events |= (RTC_AF | RTC_IRQF);
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
+ at91_rtc_imr = 0;
ret = request_irq(irq, at91_rtc_interrupt,
IRQF_SHARED,
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
+ at91_rtc_imr = 0;
free_irq(irq, pdev);
rtc_device_unregister(rtc);
/* AT91RM9200 RTC Power management control */
-static u32 at91_rtc_imr;
+static u32 at91_rtc_bkpimr;
+
static int at91_rtc_suspend(struct device *dev)
{
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
- at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR)
- & (AT91_RTC_ALARM|AT91_RTC_SECEV);
- if (at91_rtc_imr) {
- if (device_may_wakeup(dev))
+ at91_rtc_bkpimr = at91_rtc_imr & (AT91_RTC_ALARM|AT91_RTC_SECEV);
+ if (at91_rtc_bkpimr) {
+ if (device_may_wakeup(dev)) {
enable_irq_wake(irq);
- else
- at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr);
- }
+ } else {
+ at91_rtc_write(AT91_RTC_IDR, at91_rtc_bkpimr);
+ at91_rtc_imr &= ~at91_rtc_bkpimr;
+ }
+}
return 0;
}
static int at91_rtc_resume(struct device *dev)
{
- if (at91_rtc_imr) {
- if (device_may_wakeup(dev))
+ if (at91_rtc_bkpimr) {
+ if (device_may_wakeup(dev)) {
disable_irq_wake(irq);
- else
- at91_rtc_write(AT91_RTC_IER, at91_rtc_imr);
+ } else {
+ at91_rtc_imr |= at91_rtc_bkpimr;
+ at91_rtc_write(AT91_RTC_IER, at91_rtc_bkpimr);
+ }
}
return 0;
}
#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */
#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */
#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */
-#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */
#define AT91_RTC_VER 0x2c /* Valid Entry Register */
#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
rtc->da9052 = dev_get_drvdata(pdev->dev.parent);
platform_set_drvdata(pdev, rtc);
- rtc->irq = platform_get_irq_byname(pdev, "ALM");
- ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
- da9052_rtc_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "ALM", rtc);
+ rtc->irq = DA9052_IRQ_ALARM;
+ ret = da9052_request_irq(rtc->da9052, rtc->irq, "ALM",
+ da9052_rtc_irq, rtc);
if (ret != 0) {
rtc_err(rtc->da9052, "irq registration failed: %d\n", ret);
return ret;
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/module.h>
struct rtc_device *rtc;
void __iomem *ioaddr;
int irq;
+ struct clk *clk;
};
static int mv_rtc_set_time(struct device *dev, struct rtc_time *tm)
struct rtc_plat_data *pdata;
resource_size_t size;
u32 rtc_time;
+ int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
if (!pdata->ioaddr)
return -ENOMEM;
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+ if (!IS_ERR(pdata->clk))
+ clk_prepare_enable(pdata->clk);
+
/* make sure the 24 hours mode is enabled */
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time & RTC_HOURS_12H_MODE) {
dev_err(&pdev->dev, "24 Hours mode not supported.\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
/* make sure it is actually functional */
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time == 0x01000000) {
dev_err(&pdev->dev, "internal RTC not ticking\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out;
}
}
} else
pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
&mv_rtc_ops, THIS_MODULE);
- if (IS_ERR(pdata->rtc))
- return PTR_ERR(pdata->rtc);
+ if (IS_ERR(pdata->rtc)) {
+ ret = PTR_ERR(pdata->rtc);
+ goto out;
+ }
if (pdata->irq >= 0) {
writel(0, pdata->ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
}
return 0;
+out:
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
+ return ret;
}
static int __exit mv_rtc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
rtc_device_unregister(pdata->rtc);
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
return 0;
}
#include <linux/stmp_device.h>
#include <linux/stmp3xxx_rtc_wdt.h>
-#include <mach/common.h>
-
#define STMP3XXX_RTC_CTRL 0x0
#define STMP3XXX_RTC_CTRL_SET 0x4
#define STMP3XXX_RTC_CTRL_CLR 0x8
platform_set_drvdata(pdev, rtc_data);
- mxs_reset_block(rtc_data->io);
+ stmp_reset_block(rtc_data->io);
writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
{
struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(dev);
- mxs_reset_block(rtc_data->io);
+ stmp_reset_block(rtc_data->io);
writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
.release = scm_release,
};
+static bool scm_permit_request(struct scm_blk_dev *bdev, struct request *req)
+{
+ return rq_data_dir(req) != WRITE || bdev->state != SCM_WR_PROHIBIT;
+}
+
static void scm_request_prepare(struct scm_request *scmrq)
{
struct scm_blk_dev *bdev = scmrq->bdev;
scm_release_cluster(scmrq);
blk_requeue_request(bdev->rq, scmrq->request);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
scm_ensure_queue_restart(bdev);
}
void scm_request_finish(struct scm_request *scmrq)
{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+
scm_release_cluster(scmrq);
blk_end_request_all(scmrq->request, scmrq->error);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
}
if (req->cmd_type != REQ_TYPE_FS)
continue;
+ if (!scm_permit_request(bdev, req)) {
+ scm_ensure_queue_restart(bdev);
+ return;
+ }
scmrq = scm_request_fetch();
if (!scmrq) {
SCM_LOG(5, "no request");
return;
}
if (scm_need_cluster_request(scmrq)) {
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
scm_initiate_cluster_request(scmrq);
return;
}
scm_request_prepare(scmrq);
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
ret = scm_start_aob(scmrq->aob);
scm_request_requeue(scmrq);
return;
}
- atomic_inc(&bdev->queued_reqs);
}
}
tasklet_hi_schedule(&bdev->tasklet);
}
+static void scm_blk_handle_error(struct scm_request *scmrq)
+{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+ unsigned long flags;
+
+ if (scmrq->error != -EIO)
+ goto restart;
+
+ /* For -EIO the response block is valid. */
+ switch (scmrq->aob->response.eqc) {
+ case EQC_WR_PROHIBIT:
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state != SCM_WR_PROHIBIT)
+ pr_info("%lu: Write access to the SCM increment is suspended\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_WR_PROHIBIT;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+ goto requeue;
+ default:
+ break;
+ }
+
+restart:
+ if (!scm_start_aob(scmrq->aob))
+ return;
+
+requeue:
+ spin_lock_irqsave(&bdev->rq_lock, flags);
+ scm_request_requeue(scmrq);
+ spin_unlock_irqrestore(&bdev->rq_lock, flags);
+}
+
static void scm_blk_tasklet(struct scm_blk_dev *bdev)
{
struct scm_request *scmrq;
spin_unlock_irqrestore(&bdev->lock, flags);
if (scmrq->error && scmrq->retries-- > 0) {
- if (scm_start_aob(scmrq->aob)) {
- spin_lock_irqsave(&bdev->rq_lock, flags);
- scm_request_requeue(scmrq);
- spin_unlock_irqrestore(&bdev->rq_lock, flags);
- }
+ scm_blk_handle_error(scmrq);
+
/* Request restarted or requeued, handle next. */
spin_lock_irqsave(&bdev->lock, flags);
continue;
}
scm_request_finish(scmrq);
- atomic_dec(&bdev->queued_reqs);
spin_lock_irqsave(&bdev->lock, flags);
}
spin_unlock_irqrestore(&bdev->lock, flags);
}
bdev->scmdev = scmdev;
+ bdev->state = SCM_OPER;
spin_lock_init(&bdev->rq_lock);
spin_lock_init(&bdev->lock);
INIT_LIST_HEAD(&bdev->finished_requests);
put_disk(bdev->gendisk);
}
+void scm_blk_set_available(struct scm_blk_dev *bdev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state == SCM_WR_PROHIBIT)
+ pr_info("%lu: Write access to the SCM increment is restored\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_OPER;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+}
+
static int __init scm_blk_init(void)
{
int ret = -EINVAL;
spinlock_t rq_lock; /* guard the request queue */
spinlock_t lock; /* guard the rest of the blockdev */
atomic_t queued_reqs;
+ enum {SCM_OPER, SCM_WR_PROHIBIT} state;
struct list_head finished_requests;
#ifdef CONFIG_SCM_BLOCK_CLUSTER_WRITE
struct list_head cluster_list;
int scm_blk_dev_setup(struct scm_blk_dev *, struct scm_device *);
void scm_blk_dev_cleanup(struct scm_blk_dev *);
+void scm_blk_set_available(struct scm_blk_dev *);
void scm_blk_irq(struct scm_device *, void *, int);
void scm_request_finish(struct scm_request *);
#include <asm/eadm.h>
#include "scm_blk.h"
-static void notify(struct scm_device *scmdev)
+static void scm_notify(struct scm_device *scmdev, enum scm_event event)
{
- pr_info("%lu: The capabilities of the SCM increment changed\n",
- (unsigned long) scmdev->address);
- SCM_LOG(2, "State changed");
- SCM_LOG_STATE(2, scmdev);
+ struct scm_blk_dev *bdev = dev_get_drvdata(&scmdev->dev);
+
+ switch (event) {
+ case SCM_CHANGE:
+ pr_info("%lu: The capabilities of the SCM increment changed\n",
+ (unsigned long) scmdev->address);
+ SCM_LOG(2, "State changed");
+ SCM_LOG_STATE(2, scmdev);
+ break;
+ case SCM_AVAIL:
+ SCM_LOG(2, "Increment available");
+ SCM_LOG_STATE(2, scmdev);
+ scm_blk_set_available(bdev);
+ break;
+ }
}
static int scm_probe(struct scm_device *scmdev)
.name = "scm_block",
.owner = THIS_MODULE,
},
- .notify = notify,
+ .notify = scm_notify,
.probe = scm_probe,
.remove = scm_remove,
.handler = scm_blk_irq,
struct read_storage_sccb *sccb;
int i, id, assigned, rc;
+ if (OLDMEM_BASE) /* No standby memory in kdump mode */
+ return 0;
if (!early_read_info_sccb_valid)
return 0;
if ((sclp_facilities & 0xe00000000000ULL) != 0xe00000000000ULL)
" failed (rc=%d).\n", ret);
}
+static void chsc_process_sei_scm_avail(struct chsc_sei_nt0_area *sei_area)
+{
+ int ret;
+
+ CIO_CRW_EVENT(4, "chsc: scm available information\n");
+ if (sei_area->rs != 7)
+ return;
+
+ ret = scm_process_availability_information();
+ if (ret)
+ CIO_CRW_EVENT(0, "chsc: process availability information"
+ " failed (rc=%d).\n", ret);
+}
+
static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area)
{
switch (sei_area->cc) {
case 12: /* scm change notification */
chsc_process_sei_scm_change(sei_area);
break;
+ case 14: /* scm available notification */
+ chsc_process_sei_scm_avail(sei_area);
+ break;
default: /* other stuff */
CIO_CRW_EVENT(2, "chsc: sei nt0 unhandled cc=%d\n",
sei_area->cc);
#ifdef CONFIG_SCM_BUS
int scm_update_information(void);
+int scm_process_availability_information(void);
#else /* CONFIG_SCM_BUS */
static inline int scm_update_information(void) { return 0; }
+static inline int scm_process_availability_information(void) { return 0; }
#endif /* CONFIG_SCM_BUS */
goto out;
scmdrv = to_scm_drv(scmdev->dev.driver);
if (changed && scmdrv->notify)
- scmdrv->notify(scmdev);
+ scmdrv->notify(scmdev, SCM_CHANGE);
out:
device_unlock(&scmdev->dev);
if (changed)
return ret;
}
+static int scm_dev_avail(struct device *dev, void *unused)
+{
+ struct scm_driver *scmdrv = to_scm_drv(dev->driver);
+ struct scm_device *scmdev = to_scm_dev(dev);
+
+ if (dev->driver && scmdrv->notify)
+ scmdrv->notify(scmdev, SCM_AVAIL);
+
+ return 0;
+}
+
+int scm_process_availability_information(void)
+{
+ return bus_for_each_dev(&scm_bus_type, NULL, NULL, scm_dev_avail);
+}
+
static int __init scm_init(void)
{
int ret;
void *reply_param);
int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
+int qeth_get_elements_for_frags(struct sk_buff *);
int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
struct sk_buff *, struct qeth_hdr *, int, int, int);
int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
}
EXPORT_SYMBOL_GPL(qeth_get_priority_queue);
+int qeth_get_elements_for_frags(struct sk_buff *skb)
+{
+ int cnt, length, e, elements = 0;
+ struct skb_frag_struct *frag;
+ char *data;
+
+ for (cnt = 0; cnt < skb_shinfo(skb)->nr_frags; cnt++) {
+ frag = &skb_shinfo(skb)->frags[cnt];
+ data = (char *)page_to_phys(skb_frag_page(frag)) +
+ frag->page_offset;
+ length = frag->size;
+ e = PFN_UP((unsigned long)data + length - 1) -
+ PFN_DOWN((unsigned long)data);
+ elements += e;
+ }
+ return elements;
+}
+EXPORT_SYMBOL_GPL(qeth_get_elements_for_frags);
+
int qeth_get_elements_no(struct qeth_card *card, void *hdr,
struct sk_buff *skb, int elems)
{
int elements_needed = PFN_UP((unsigned long)skb->data + dlen - 1) -
PFN_DOWN((unsigned long)skb->data);
- elements_needed += skb_shinfo(skb)->nr_frags;
+ elements_needed += qeth_get_elements_for_frags(skb);
+
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
for (cnt = 0; cnt < skb_shinfo(skb)->nr_frags; cnt++) {
frag = &skb_shinfo(skb)->frags[cnt];
- buffer->element[element].addr = (char *)
- page_to_phys(skb_frag_page(frag))
- + frag->page_offset;
- buffer->element[element].length = frag->size;
- buffer->element[element].eflags = SBAL_EFLAGS_MIDDLE_FRAG;
- element++;
+ data = (char *)page_to_phys(skb_frag_page(frag)) +
+ frag->page_offset;
+ length = frag->size;
+ while (length > 0) {
+ length_here = PAGE_SIZE -
+ ((unsigned long) data % PAGE_SIZE);
+ if (length < length_here)
+ length_here = length;
+
+ buffer->element[element].addr = data;
+ buffer->element[element].length = length_here;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_MIDDLE_FRAG;
+ length -= length_here;
+ data += length_here;
+ element++;
+ }
}
if (buffer->element[element - 1].eflags)
return rc;
}
-static void qeth_l3_correct_routing_type(struct qeth_card *card,
+static int qeth_l3_correct_routing_type(struct qeth_card *card,
enum qeth_routing_types *type, enum qeth_prot_versions prot)
{
if (card->info.type == QETH_CARD_TYPE_IQD) {
case PRIMARY_CONNECTOR:
case SECONDARY_CONNECTOR:
case MULTICAST_ROUTER:
- return;
+ return 0;
default:
goto out_inval;
}
case NO_ROUTER:
case PRIMARY_ROUTER:
case SECONDARY_ROUTER:
- return;
+ return 0;
case MULTICAST_ROUTER:
if (qeth_is_ipafunc_supported(card, prot,
IPA_OSA_MC_ROUTER))
- return;
+ return 0;
default:
goto out_inval;
}
}
out_inval:
*type = NO_ROUTER;
+ return -EINVAL;
}
int qeth_l3_setrouting_v4(struct qeth_card *card)
QETH_CARD_TEXT(card, 3, "setrtg4");
- qeth_l3_correct_routing_type(card, &card->options.route4.type,
+ rc = qeth_l3_correct_routing_type(card, &card->options.route4.type,
QETH_PROT_IPV4);
+ if (rc)
+ return rc;
rc = qeth_l3_send_setrouting(card, card->options.route4.type,
QETH_PROT_IPV4);
if (!qeth_is_supported(card, IPA_IPV6))
return 0;
- qeth_l3_correct_routing_type(card, &card->options.route6.type,
+ rc = qeth_l3_correct_routing_type(card, &card->options.route6.type,
QETH_PROT_IPV6);
+ if (rc)
+ return rc;
rc = qeth_l3_send_setrouting(card, card->options.route6.type,
QETH_PROT_IPV6);
tcp_hdr(skb)->doff * 4;
int tcpd_len = skb->len - (tcpd - (unsigned long)skb->data);
int elements = PFN_UP(tcpd + tcpd_len - 1) - PFN_DOWN(tcpd);
- elements += skb_shinfo(skb)->nr_frags;
+
+ elements += qeth_get_elements_for_frags(skb);
+
return elements;
}
rc = -ENODEV;
goto out_remove;
}
- qeth_trace_features(card);
if (!card->dev && qeth_l3_setup_netdev(card)) {
rc = -ENODEV;
qeth_l3_set_multicast_list(card->dev);
rtnl_unlock();
}
+ qeth_trace_features(card);
/* let user_space know that device is online */
kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
mutex_unlock(&card->conf_mutex);
rc = qeth_l3_setrouting_v6(card);
}
out:
+ if (rc)
+ route->type = old_route_type;
mutex_unlock(&card->conf_mutex);
return rc ? rc : count;
}
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;
dt9812_digital_in(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++)
- data[n] = ((1 << insn->chanspec) & bits) != 0;
+ data[n] = ((1 << channel) & bits) != 0;
return n;
}
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;
dt9812_digital_out_shadow(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++) {
- u8 mask = 1 << insn->chanspec;
+ u8 mask = 1 << channel;
bits &= ~mask;
if (data[n])
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
for (n = 0; n < insn->n; n++) {
u16 value = 0;
- dt9812_analog_in(devpriv->slot, insn->chanspec, &value,
- DT9812_GAIN_1);
+ dt9812_analog_in(devpriv->slot, channel, &value, DT9812_GAIN_1);
data[n] = value;
}
return n;
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u16 value;
for (n = 0; n < insn->n; n++) {
value = 0;
- dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value);
+ dt9812_analog_out_shadow(devpriv->slot, channel, &value);
data[n] = value;
}
return n;
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
for (n = 0; n < insn->n; n++)
- dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]);
+ dt9812_analog_out(devpriv->slot, channel, data[n]);
return n;
}
case TRIG_NONE:
/* continous acquisition */
devpriv->ai_continous = 1;
- devpriv->ai_sample_count = 0;
+ devpriv->ai_sample_count = 1;
break;
}
static int usbduxsub_start(struct usbduxsub *usbduxsub)
{
int errcode = 0;
- uint8_t local_transfer_buffer[16];
+ uint8_t *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
- local_transfer_buffer[0] = 0;
+ *local_transfer_buffer = 0;
errcode = usb_control_msg(usbduxsub->usbdev,
/* create a pipe for a control transfer */
usb_sndctrlpipe(usbduxsub->usbdev, 0),
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (start)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_stop(struct usbduxsub *usbduxsub)
{
int errcode = 0;
+ uint8_t *local_transfer_buffer;
- uint8_t local_transfer_buffer[16];
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
- local_transfer_buffer[0] = 1;
+ *local_transfer_buffer = 1;
errcode = usb_control_msg(usbduxsub->usbdev,
usb_sndctrlpipe(usbduxsub->usbdev, 0),
/* bRequest, "Firmware" */
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (stop)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_upload(struct usbduxsub *usbduxsub,
static int usbduxfastsub_start(struct usbduxfastsub_s *udfs)
{
int ret;
- unsigned char local_transfer_buffer[16];
+ unsigned char *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
- local_transfer_buffer[0] = 0;
+ *local_transfer_buffer = 0;
/* bRequest, "Firmware" */
ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
USBDUXFASTSUB_FIRMWARE,
local_transfer_buffer,
1, /* Length */
EZTIMEOUT); /* Timeout */
- if (ret < 0) {
+ if (ret < 0)
dev_err(&udfs->interface->dev,
"control msg failed (start)\n");
- return ret;
- }
- return 0;
+ kfree(local_transfer_buffer);
+ return ret;
}
static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
{
int ret;
- unsigned char local_transfer_buffer[16];
+ unsigned char *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
- local_transfer_buffer[0] = 1;
+ *local_transfer_buffer = 1;
/* bRequest, "Firmware" */
ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
USBDUXFASTSUB_FIRMWARE,
0x0000, /* Index */
local_transfer_buffer, 1, /* Length */
EZTIMEOUT); /* Timeout */
- if (ret < 0) {
+ if (ret < 0)
dev_err(&udfs->interface->dev,
"control msg failed (stop)\n");
- return ret;
- }
- return 0;
+ kfree(local_transfer_buffer);
+ return ret;
}
static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
static int usbduxsub_start(struct usbduxsub *usbduxsub)
{
int errcode = 0;
- uint8_t local_transfer_buffer[16];
+ uint8_t *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
local_transfer_buffer[0] = 0;
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (start)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_stop(struct usbduxsub *usbduxsub)
{
int errcode = 0;
+ uint8_t *local_transfer_buffer;
- uint8_t local_transfer_buffer[16];
+ local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
local_transfer_buffer[0] = 1;
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (stop)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_upload(struct usbduxsub *usbduxsub,
#include <linux/delay.h>
#include <linux/input.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
-
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/clk.h>
#include <linux/list.h>
#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/of_device.h>
-#include <asm/mach/irq.h>
#include "imx-ipu-v3.h"
#include "ipu-prv.h"
goto err_out;
}
- ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
- IPU_IRQ_EOF);
- ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
- "imx_drm", ipu_crtc);
- if (ret < 0) {
- dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
- goto err_out;
- }
-
- disable_irq(ipu_crtc->irq);
-
return 0;
err_out:
ipu_put_resources(ipu_crtc);
static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
struct ipu_client_platformdata *pdata)
{
+ struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
int ret;
ret = ipu_get_resources(ipu_crtc, pdata);
goto err_put_resources;
}
+ ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
+ IPU_IRQ_EOF);
+ ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
+ "imx_drm", ipu_crtc);
+ if (ret < 0) {
+ dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
+ goto err_put_resources;
+ }
+
+ disable_irq(ipu_crtc->irq);
+
return 0;
err_put_resources:
struct node_res_object **node_res_obj =
(struct node_res_object **)node_resource;
struct process_context *ctxt = (struct process_context *)process_ctxt;
- int status = 0;
int retval;
*node_res_obj = kzalloc(sizeof(struct node_res_object), GFP_KERNEL);
- if (!*node_res_obj) {
- status = -ENOMEM;
- goto func_end;
- }
+ if (!*node_res_obj)
+ return -ENOMEM;
(*node_res_obj)->node = hnode;
- retval = idr_get_new(ctxt->node_id, *node_res_obj,
- &(*node_res_obj)->id);
- if (retval == -EAGAIN) {
- if (!idr_pre_get(ctxt->node_id, GFP_KERNEL)) {
- pr_err("%s: OUT OF MEMORY\n", __func__);
- status = -ENOMEM;
- goto func_end;
- }
-
- retval = idr_get_new(ctxt->node_id, *node_res_obj,
- &(*node_res_obj)->id);
+ retval = idr_alloc(ctxt->node_id, *node_res_obj, 0, 0, GFP_KERNEL);
+ if (retval >= 0) {
+ (*node_res_obj)->id = retval;
+ return 0;
}
- if (retval) {
+
+ kfree(*node_res_obj);
+
+ if (retval == -ENOSPC) {
pr_err("%s: FAILED, IDR is FULL\n", __func__);
- status = -EFAULT;
+ return -EFAULT;
+ } else {
+ pr_err("%s: OUT OF MEMORY\n", __func__);
+ return -ENOMEM;
}
-func_end:
- if (status)
- kfree(*node_res_obj);
-
- return status;
}
/* Release all Node resources and its context
struct strm_res_object **pstrm_res =
(struct strm_res_object **)strm_res;
struct process_context *ctxt = (struct process_context *)process_ctxt;
- int status = 0;
int retval;
*pstrm_res = kzalloc(sizeof(struct strm_res_object), GFP_KERNEL);
- if (*pstrm_res == NULL) {
- status = -EFAULT;
- goto func_end;
- }
+ if (*pstrm_res == NULL)
+ return -EFAULT;
(*pstrm_res)->stream = stream_obj;
- retval = idr_get_new(ctxt->stream_id, *pstrm_res,
- &(*pstrm_res)->id);
- if (retval == -EAGAIN) {
- if (!idr_pre_get(ctxt->stream_id, GFP_KERNEL)) {
- pr_err("%s: OUT OF MEMORY\n", __func__);
- status = -ENOMEM;
- goto func_end;
- }
-
- retval = idr_get_new(ctxt->stream_id, *pstrm_res,
- &(*pstrm_res)->id);
+ retval = idr_alloc(ctxt->stream_id, *pstrm_res, 0, 0, GFP_KERNEL);
+ if (retval >= 0) {
+ (*pstrm_res)->id = retval;
+ return 0;
}
- if (retval) {
+
+ if (retval == -ENOSPC) {
pr_err("%s: FAILED, IDR is FULL\n", __func__);
- status = -EPERM;
+ return -EPERM;
+ } else {
+ pr_err("%s: OUT OF MEMORY\n", __func__);
+ return -ENOMEM;
}
-
-func_end:
- return status;
}
static int drv_proc_free_strm_res(int id, void *p, void *process_ctxt)
if ((~uLowNextTBTT) < uLowRemain)
qwTSF = ((qwTSF >> 32) + 1) << 32;
- qwTSF = (qwTSF & 0xffffffff00000000UL) |
+ qwTSF = (qwTSF & 0xffffffff00000000ULL) |
(u64)(uLowNextTBTT + uLowRemain);
return (qwTSF);
if (device->flags & DEVICE_FLAGS_OPENED)
device_close(device->dev);
- usb_put_dev(interface_to_usbdev(intf));
-
return 0;
}
if (!device || !device->dev)
return -ENODEV;
- usb_get_dev(interface_to_usbdev(intf));
-
if (!(device->flags & DEVICE_FLAGS_OPENED))
device_open(device->dev);
depends on CONFIGFS_FS=y && SYSFS=y && !HIGHMEM && ZCACHE=y
depends on NET
# must ensure struct page is 8-byte aligned
- select HAVE_ALIGNED_STRUCT_PAGE if !64_BIT
+ select HAVE_ALIGNED_STRUCT_PAGE if !64BIT
default n
help
RAMster allows RAM on other machines in a cluster to be utilized
static int r2net_prep_nsw(struct r2net_node *nn, struct r2net_status_wait *nsw)
{
- int ret = 0;
+ int ret;
- do {
- if (!idr_pre_get(&nn->nn_status_idr, GFP_ATOMIC)) {
- ret = -EAGAIN;
- break;
- }
- spin_lock(&nn->nn_lock);
- ret = idr_get_new(&nn->nn_status_idr, nsw, &nsw->ns_id);
- if (ret == 0)
- list_add_tail(&nsw->ns_node_item,
- &nn->nn_status_list);
- spin_unlock(&nn->nn_lock);
- } while (ret == -EAGAIN);
+ spin_lock(&nn->nn_lock);
+ ret = idr_alloc(&nn->nn_status_idr, nsw, 0, 0, GFP_ATOMIC);
+ if (ret >= 0) {
+ nsw->ns_id = ret;
+ list_add_tail(&nsw->ns_node_item, &nn->nn_status_list);
+ }
+ spin_unlock(&nn->nn_lock);
- if (ret == 0) {
+ if (ret >= 0) {
init_waitqueue_head(&nsw->ns_wq);
nsw->ns_sys_status = R2NET_ERR_NONE;
nsw->ns_status = 0;
+ return 0;
}
-
return ret;
}
{
char *endptr;
unsigned long id;
+ unsigned char id_as_uchar;
unsigned char digest[MD5_SIGNATURE_SIZE];
unsigned char type, response[MD5_SIGNATURE_SIZE * 2 + 2];
unsigned char identifier[10], *challenge = NULL;
goto out;
}
- sg_init_one(&sg, &id, 1);
+ /* To handle both endiannesses */
+ id_as_uchar = id;
+ sg_init_one(&sg, &id_as_uchar, 1);
ret = crypto_hash_update(&desc, &sg, 1);
if (ret < 0) {
pr_err("crypto_hash_update() failed for id\n");
#define FD_DEVICE_QUEUE_DEPTH 32
#define FD_MAX_DEVICE_QUEUE_DEPTH 128
#define FD_BLOCKSIZE 512
-#define FD_MAX_SECTORS 1024
+#define FD_MAX_SECTORS 2048
#define RRF_EMULATE_CDB 0x01
#define RRF_GOT_LBA 0x02
pr_debug("PSCSI: i: %d page: %p len: %d off: %d\n", i,
page, len, off);
- while (len > 0 && data_len > 0) {
+ /*
+ * We only have one page of data in each sg element,
+ * we can not cross a page boundary.
+ */
+ if (off + len > PAGE_SIZE)
+ goto fail;
+
+ if (len > 0 && data_len > 0) {
bytes = min_t(unsigned int, len, PAGE_SIZE - off);
bytes = min(bytes, data_len);
bio = NULL;
}
- len -= bytes;
data_len -= bytes;
- off = 0;
}
}
break;
case SYNCHRONIZE_CACHE:
case SYNCHRONIZE_CACHE_16:
- if (!ops->execute_sync_cache)
- return TCM_UNSUPPORTED_SCSI_OPCODE;
+ if (!ops->execute_sync_cache) {
+ size = 0;
+ cmd->execute_cmd = sbc_emulate_noop;
+ break;
+ }
/*
* Extract LBA and range to be flushed for emulated SYNCHRONIZE_CACHE
if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) {
if (core_tpg_setup_virtual_lun0(se_tpg) < 0) {
- kfree(se_tpg);
+ array_free(se_tpg->tpg_lun_list,
+ TRANSPORT_MAX_LUNS_PER_TPG);
return -ENOMEM;
}
}
return ret;
ret = target_check_reservation(cmd);
- if (ret)
+ if (ret) {
+ cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
return ret;
+ }
ret = dev->transport->parse_cdb(cmd);
if (ret)
if (!priv)
return -ENOMEM;
- priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
- if (!priv->sensor) {
- dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
- return -EADDRNOTAVAIL;
- }
+ priv->sensor = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->sensor))
+ return PTR_ERR(priv->sensor);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res) {
dev_err(&pdev->dev, "Failed to get platform resource\n");
return -ENODEV;
}
- priv->control = devm_request_and_ioremap(&pdev->dev, res);
- if (!priv->control) {
- dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
- return -EADDRNOTAVAIL;
- }
+ priv->control = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->control))
+ return PTR_ERR(priv->control);
ret = dove_init_sensor(priv);
if (ret) {
if (IS_ERR(th_zone->therm_dev)) {
pr_err("Failed to register thermal zone device\n");
- ret = -EINVAL;
+ ret = PTR_ERR(th_zone->therm_dev);
goto err_unregister;
}
th_zone->mode = THERMAL_DEVICE_ENABLED;
if (!priv)
return -ENOMEM;
- priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
- if (!priv->sensor) {
- dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
- return -EADDRNOTAVAIL;
- }
+ priv->sensor = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->sensor))
+ return PTR_ERR(priv->sensor);
thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
priv, &ops, NULL, 0, 0);
struct device *dev = rcar_priv_to_dev(priv);
int i;
int ctemp, old, new;
+ int ret = -EINVAL;
mutex_lock(&priv->lock);
if (!ctemp) {
dev_err(dev, "thermal sensor was broken\n");
- return -EINVAL;
+ goto err_out_unlock;
}
/*
dev_dbg(dev, "thermal%d %d -> %d\n", priv->id, priv->ctemp, ctemp);
priv->ctemp = ctemp;
-
+ ret = 0;
+err_out_unlock:
mutex_unlock(&priv->lock);
-
- return 0;
+ return ret;
}
static int rcar_thermal_get_temp(struct thermal_zone_device *zone,
struct resource *res, *irq;
int mres = 0;
int i;
+ int ret = -ENODEV;
int idle = IDLE_INTERVAL;
common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
/*
* rcar_has_irq_support() will be enabled
*/
- common->base = devm_request_and_ioremap(dev, res);
- if (!common->base) {
- dev_err(dev, "Unable to ioremap thermal register\n");
- return -ENOMEM;
- }
+ common->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(common->base))
+ return PTR_ERR(common->base);
/* enable temperature comparation */
rcar_thermal_common_write(common, ENR, 0x00030303);
return -ENOMEM;
}
- priv->base = devm_request_and_ioremap(dev, res);
- if (!priv->base) {
- dev_err(dev, "Unable to ioremap priv register\n");
- return -ENOMEM;
- }
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
priv->common = common;
priv->id = i;
idle);
if (IS_ERR(priv->zone)) {
dev_err(dev, "can't register thermal zone\n");
+ ret = PTR_ERR(priv->zone);
goto error_unregister;
}
rcar_thermal_for_each_priv(priv, common)
thermal_zone_device_unregister(priv->zone);
- return -ENODEV;
+ return ret;
}
static int rcar_thermal_remove(struct platform_device *pdev)
+++ /dev/null
-/*
- * Driver for 8250/16550-type serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * Copyright (C) 2001 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * A note about mapbase / membase
- *
- * mapbase is the physical address of the IO port.
- * membase is an 'ioremapped' cookie.
- */
-
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/ratelimit.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/nmi.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#ifdef CONFIG_SPARC
-#include <linux/sunserialcore.h>
-#endif
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include "8250.h"
-
-/*
- * Configuration:
- * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
- * is unsafe when used on edge-triggered interrupts.
- */
-static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
-
-static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
-
-static struct uart_driver serial8250_reg;
-
-static int serial_index(struct uart_port *port)
-{
- return (serial8250_reg.minor - 64) + port->line;
-}
-
-static unsigned int skip_txen_test; /* force skip of txen test at init time */
-
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
-#define PASS_LIMIT 512
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define CONFIG_SERIAL_DETECT_IRQ 1
-#endif
-#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define CONFIG_SERIAL_MANY_PORTS 1
-#endif
-
-/*
- * HUB6 is always on. This will be removed once the header
- * files have been cleaned.
- */
-#define CONFIG_HUB6 1
-
-#include <asm/serial.h>
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism. Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static const struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS /* defined in asm/serial.h */
-};
-
-#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
-
-#ifdef CONFIG_SERIAL_8250_RSA
-
-#define PORT_RSA_MAX 4
-static unsigned long probe_rsa[PORT_RSA_MAX];
-static unsigned int probe_rsa_count;
-#endif /* CONFIG_SERIAL_8250_RSA */
-
-struct irq_info {
- struct hlist_node node;
- int irq;
- spinlock_t lock; /* Protects list not the hash */
- struct list_head *head;
-};
-
-#define NR_IRQ_HASH 32 /* Can be adjusted later */
-static struct hlist_head irq_lists[NR_IRQ_HASH];
-static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
-
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial8250_config uart_config[] = {
- [PORT_UNKNOWN] = {
- .name = "unknown",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_8250] = {
- .name = "8250",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16450] = {
- .name = "16450",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16550] = {
- .name = "16550",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16550A] = {
- .name = "16550A",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
- [PORT_CIRRUS] = {
- .name = "Cirrus",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16650] = {
- .name = "ST16650",
- .fifo_size = 1,
- .tx_loadsz = 1,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16650V2] = {
- .name = "ST16650V2",
- .fifo_size = 32,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_00,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16750] = {
- .name = "TI16750",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
- UART_FCR7_64BYTE,
- .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
- },
- [PORT_STARTECH] = {
- .name = "Startech",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16C950] = {
- .name = "16C950/954",
- .fifo_size = 128,
- .tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- /* UART_CAP_EFR breaks billionon CF bluetooth card. */
- .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
- },
- [PORT_16654] = {
- .name = "ST16654",
- .fifo_size = 64,
- .tx_loadsz = 32,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16850] = {
- .name = "XR16850",
- .fifo_size = 128,
- .tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_RSA] = {
- .name = "RSA",
- .fifo_size = 2048,
- .tx_loadsz = 2048,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
- .flags = UART_CAP_FIFO,
- },
- [PORT_NS16550A] = {
- .name = "NS16550A",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_NATSEMI,
- },
- [PORT_XSCALE] = {
- .name = "XScale",
- .fifo_size = 32,
- .tx_loadsz = 32,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
- },
- [PORT_OCTEON] = {
- .name = "OCTEON",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
- [PORT_AR7] = {
- .name = "AR7",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_U6_16550A] = {
- .name = "U6_16550A",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_TEGRA] = {
- .name = "Tegra",
- .fifo_size = 32,
- .tx_loadsz = 8,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_01,
- .flags = UART_CAP_FIFO | UART_CAP_RTOIE,
- },
- [PORT_XR17D15X] = {
- .name = "XR17D15X",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP,
- },
- [PORT_XR17V35X] = {
- .name = "XR17V35X",
- .fifo_size = 256,
- .tx_loadsz = 256,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 |
- UART_FCR_T_TRIG_11,
- .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP,
- },
- [PORT_LPC3220] = {
- .name = "LPC3220",
- .fifo_size = 64,
- .tx_loadsz = 32,
- .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
- UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
- .flags = UART_CAP_FIFO,
- },
- [PORT_BRCM_TRUMANAGE] = {
- .name = "TruManage",
- .fifo_size = 1,
- .tx_loadsz = 1024,
- .flags = UART_CAP_HFIFO,
- },
- [PORT_8250_CIR] = {
- .name = "CIR port"
- }
-};
-
-/* Uart divisor latch read */
-static int default_serial_dl_read(struct uart_8250_port *up)
-{
- return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
-}
-
-/* Uart divisor latch write */
-static void default_serial_dl_write(struct uart_8250_port *up, int value)
-{
- serial_out(up, UART_DLL, value & 0xff);
- serial_out(up, UART_DLM, value >> 8 & 0xff);
-}
-
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
-
-/* Au1x00/RT288x UART hardware has a weird register layout */
-static const u8 au_io_in_map[] = {
- [UART_RX] = 0,
- [UART_IER] = 2,
- [UART_IIR] = 3,
- [UART_LCR] = 5,
- [UART_MCR] = 6,
- [UART_LSR] = 7,
- [UART_MSR] = 8,
-};
-
-static const u8 au_io_out_map[] = {
- [UART_TX] = 1,
- [UART_IER] = 2,
- [UART_FCR] = 4,
- [UART_LCR] = 5,
- [UART_MCR] = 6,
-};
-
-static unsigned int au_serial_in(struct uart_port *p, int offset)
-{
- offset = au_io_in_map[offset] << p->regshift;
- return __raw_readl(p->membase + offset);
-}
-
-static void au_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = au_io_out_map[offset] << p->regshift;
- __raw_writel(value, p->membase + offset);
-}
-
-/* Au1x00 haven't got a standard divisor latch */
-static int au_serial_dl_read(struct uart_8250_port *up)
-{
- return __raw_readl(up->port.membase + 0x28);
-}
-
-static void au_serial_dl_write(struct uart_8250_port *up, int value)
-{
- __raw_writel(value, up->port.membase + 0x28);
-}
-
-#endif
-
-static unsigned int hub6_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- return inb(p->iobase + 1);
-}
-
-static void hub6_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- outb(value, p->iobase + 1);
-}
-
-static unsigned int mem_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- return readb(p->membase + offset);
-}
-
-static void mem_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- writeb(value, p->membase + offset);
-}
-
-static void mem32_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- writel(value, p->membase + offset);
-}
-
-static unsigned int mem32_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- return readl(p->membase + offset);
-}
-
-static unsigned int io_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- return inb(p->iobase + offset);
-}
-
-static void io_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- outb(value, p->iobase + offset);
-}
-
-static int serial8250_default_handle_irq(struct uart_port *port);
-static int exar_handle_irq(struct uart_port *port);
-
-static void set_io_from_upio(struct uart_port *p)
-{
- struct uart_8250_port *up =
- container_of(p, struct uart_8250_port, port);
-
- up->dl_read = default_serial_dl_read;
- up->dl_write = default_serial_dl_write;
-
- switch (p->iotype) {
- case UPIO_HUB6:
- p->serial_in = hub6_serial_in;
- p->serial_out = hub6_serial_out;
- break;
-
- case UPIO_MEM:
- p->serial_in = mem_serial_in;
- p->serial_out = mem_serial_out;
- break;
-
- case UPIO_MEM32:
- p->serial_in = mem32_serial_in;
- p->serial_out = mem32_serial_out;
- break;
-
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
- case UPIO_AU:
- p->serial_in = au_serial_in;
- p->serial_out = au_serial_out;
- up->dl_read = au_serial_dl_read;
- up->dl_write = au_serial_dl_write;
- break;
-#endif
-
- default:
- p->serial_in = io_serial_in;
- p->serial_out = io_serial_out;
- break;
- }
- /* Remember loaded iotype */
- up->cur_iotype = p->iotype;
- p->handle_irq = serial8250_default_handle_irq;
-}
-
-static void
-serial_port_out_sync(struct uart_port *p, int offset, int value)
-{
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
- p->serial_out(p, offset, value);
- p->serial_in(p, UART_LCR); /* safe, no side-effects */
- break;
- default:
- p->serial_out(p, offset, value);
- }
-}
-
-/*
- * For the 16C950
- */
-static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
-{
- serial_out(up, UART_SCR, offset);
- serial_out(up, UART_ICR, value);
-}
-
-static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
-{
- unsigned int value;
-
- serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
- serial_out(up, UART_SCR, offset);
- value = serial_in(up, UART_ICR);
- serial_icr_write(up, UART_ACR, up->acr);
-
- return value;
-}
-
-/*
- * FIFO support.
- */
-static void serial8250_clear_fifos(struct uart_8250_port *p)
-{
- if (p->capabilities & UART_CAP_FIFO) {
- serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
- serial_out(p, UART_FCR, 0);
- }
-}
-
-void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
-{
- unsigned char fcr;
-
- serial8250_clear_fifos(p);
- fcr = uart_config[p->port.type].fcr;
- serial_out(p, UART_FCR, fcr);
-}
-EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
-
-/*
- * IER sleep support. UARTs which have EFRs need the "extended
- * capability" bit enabled. Note that on XR16C850s, we need to
- * reset LCR to write to IER.
- */
-static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
-{
- /*
- * Exar UARTs have a SLEEP register that enables or disables
- * each UART to enter sleep mode separately. On the XR17V35x the
- * register is accessible to each UART at the UART_EXAR_SLEEP
- * offset but the UART channel may only write to the corresponding
- * bit.
- */
- if ((p->port.type == PORT_XR17V35X) ||
- (p->port.type == PORT_XR17D15X)) {
- serial_out(p, UART_EXAR_SLEEP, 0xff);
- return;
- }
-
- if (p->capabilities & UART_CAP_SLEEP) {
- if (p->capabilities & UART_CAP_EFR) {
- serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(p, UART_EFR, UART_EFR_ECB);
- serial_out(p, UART_LCR, 0);
- }
- serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
- if (p->capabilities & UART_CAP_EFR) {
- serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(p, UART_EFR, 0);
- serial_out(p, UART_LCR, 0);
- }
- }
-}
-
-#ifdef CONFIG_SERIAL_8250_RSA
-/*
- * Attempts to turn on the RSA FIFO. Returns zero on failure.
- * We set the port uart clock rate if we succeed.
- */
-static int __enable_rsa(struct uart_8250_port *up)
-{
- unsigned char mode;
- int result;
-
- mode = serial_in(up, UART_RSA_MSR);
- result = mode & UART_RSA_MSR_FIFO;
-
- if (!result) {
- serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
- mode = serial_in(up, UART_RSA_MSR);
- result = mode & UART_RSA_MSR_FIFO;
- }
-
- if (result)
- up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
-
- return result;
-}
-
-static void enable_rsa(struct uart_8250_port *up)
-{
- if (up->port.type == PORT_RSA) {
- if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
- __enable_rsa(up);
- spin_unlock_irq(&up->port.lock);
- }
- if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
- serial_out(up, UART_RSA_FRR, 0);
- }
-}
-
-/*
- * Attempts to turn off the RSA FIFO. Returns zero on failure.
- * It is unknown why interrupts were disabled in here. However,
- * the caller is expected to preserve this behaviour by grabbing
- * the spinlock before calling this function.
- */
-static void disable_rsa(struct uart_8250_port *up)
-{
- unsigned char mode;
- int result;
-
- if (up->port.type == PORT_RSA &&
- up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
-
- mode = serial_in(up, UART_RSA_MSR);
- result = !(mode & UART_RSA_MSR_FIFO);
-
- if (!result) {
- serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
- mode = serial_in(up, UART_RSA_MSR);
- result = !(mode & UART_RSA_MSR_FIFO);
- }
-
- if (result)
- up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
- spin_unlock_irq(&up->port.lock);
- }
-}
-#endif /* CONFIG_SERIAL_8250_RSA */
-
-/*
- * This is a quickie test to see how big the FIFO is.
- * It doesn't work at all the time, more's the pity.
- */
-static int size_fifo(struct uart_8250_port *up)
-{
- unsigned char old_fcr, old_mcr, old_lcr;
- unsigned short old_dl;
- int count;
-
- old_lcr = serial_in(up, UART_LCR);
- serial_out(up, UART_LCR, 0);
- old_fcr = serial_in(up, UART_FCR);
- old_mcr = serial_in(up, UART_MCR);
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
- serial_out(up, UART_MCR, UART_MCR_LOOP);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- old_dl = serial_dl_read(up);
- serial_dl_write(up, 0x0001);
- serial_out(up, UART_LCR, 0x03);
- for (count = 0; count < 256; count++)
- serial_out(up, UART_TX, count);
- mdelay(20);/* FIXME - schedule_timeout */
- for (count = 0; (serial_in(up, UART_LSR) & UART_LSR_DR) &&
- (count < 256); count++)
- serial_in(up, UART_RX);
- serial_out(up, UART_FCR, old_fcr);
- serial_out(up, UART_MCR, old_mcr);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- serial_dl_write(up, old_dl);
- serial_out(up, UART_LCR, old_lcr);
-
- return count;
-}
-
-/*
- * Read UART ID using the divisor method - set DLL and DLM to zero
- * and the revision will be in DLL and device type in DLM. We
- * preserve the device state across this.
- */
-static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
-{
- unsigned char old_dll, old_dlm, old_lcr;
- unsigned int id;
-
- old_lcr = serial_in(p, UART_LCR);
- serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
-
- old_dll = serial_in(p, UART_DLL);
- old_dlm = serial_in(p, UART_DLM);
-
- serial_out(p, UART_DLL, 0);
- serial_out(p, UART_DLM, 0);
-
- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
-
- serial_out(p, UART_DLL, old_dll);
- serial_out(p, UART_DLM, old_dlm);
- serial_out(p, UART_LCR, old_lcr);
-
- return id;
-}
-
-/*
- * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
- * When this function is called we know it is at least a StarTech
- * 16650 V2, but it might be one of several StarTech UARTs, or one of
- * its clones. (We treat the broken original StarTech 16650 V1 as a
- * 16550, and why not? Startech doesn't seem to even acknowledge its
- * existence.)
- *
- * What evil have men's minds wrought...
- */
-static void autoconfig_has_efr(struct uart_8250_port *up)
-{
- unsigned int id1, id2, id3, rev;
-
- /*
- * Everything with an EFR has SLEEP
- */
- up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
-
- /*
- * First we check to see if it's an Oxford Semiconductor UART.
- *
- * If we have to do this here because some non-National
- * Semiconductor clone chips lock up if you try writing to the
- * LSR register (which serial_icr_read does)
- */
-
- /*
- * Check for Oxford Semiconductor 16C950.
- *
- * EFR [4] must be set else this test fails.
- *
- * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
- * claims that it's needed for 952 dual UART's (which are not
- * recommended for new designs).
- */
- up->acr = 0;
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, UART_EFR_ECB);
- serial_out(up, UART_LCR, 0x00);
- id1 = serial_icr_read(up, UART_ID1);
- id2 = serial_icr_read(up, UART_ID2);
- id3 = serial_icr_read(up, UART_ID3);
- rev = serial_icr_read(up, UART_REV);
-
- DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
-
- if (id1 == 0x16 && id2 == 0xC9 &&
- (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
- up->port.type = PORT_16C950;
-
- /*
- * Enable work around for the Oxford Semiconductor 952 rev B
- * chip which causes it to seriously miscalculate baud rates
- * when DLL is 0.
- */
- if (id3 == 0x52 && rev == 0x01)
- up->bugs |= UART_BUG_QUOT;
- return;
- }
-
- /*
- * We check for a XR16C850 by setting DLL and DLM to 0, and then
- * reading back DLL and DLM. The chip type depends on the DLM
- * value read back:
- * 0x10 - XR16C850 and the DLL contains the chip revision.
- * 0x12 - XR16C2850.
- * 0x14 - XR16C854.
- */
- id1 = autoconfig_read_divisor_id(up);
- DEBUG_AUTOCONF("850id=%04x ", id1);
-
- id2 = id1 >> 8;
- if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
- up->port.type = PORT_16850;
- return;
- }
-
- /*
- * It wasn't an XR16C850.
- *
- * We distinguish between the '654 and the '650 by counting
- * how many bytes are in the FIFO. I'm using this for now,
- * since that's the technique that was sent to me in the
- * serial driver update, but I'm not convinced this works.
- * I've had problems doing this in the past. -TYT
- */
- if (size_fifo(up) == 64)
- up->port.type = PORT_16654;
- else
- up->port.type = PORT_16650V2;
-}
-
-/*
- * We detected a chip without a FIFO. Only two fall into
- * this category - the original 8250 and the 16450. The
- * 16450 has a scratch register (accessible with LCR=0)
- */
-static void autoconfig_8250(struct uart_8250_port *up)
-{
- unsigned char scratch, status1, status2;
-
- up->port.type = PORT_8250;
-
- scratch = serial_in(up, UART_SCR);
- serial_out(up, UART_SCR, 0xa5);
- status1 = serial_in(up, UART_SCR);
- serial_out(up, UART_SCR, 0x5a);
- status2 = serial_in(up, UART_SCR);
- serial_out(up, UART_SCR, scratch);
-
- if (status1 == 0xa5 && status2 == 0x5a)
- up->port.type = PORT_16450;
-}
-
-static int broken_efr(struct uart_8250_port *up)
-{
- /*
- * Exar ST16C2550 "A2" devices incorrectly detect as
- * having an EFR, and report an ID of 0x0201. See
- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
- */
- if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
- return 1;
-
- return 0;
-}
-
-static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
-{
- unsigned char status;
-
- status = serial_in(up, 0x04); /* EXCR2 */
-#define PRESL(x) ((x) & 0x30)
- if (PRESL(status) == 0x10) {
- /* already in high speed mode */
- return 0;
- } else {
- status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
- status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
- serial_out(up, 0x04, status);
- }
- return 1;
-}
-
-/*
- * We know that the chip has FIFOs. Does it have an EFR? The
- * EFR is located in the same register position as the IIR and
- * we know the top two bits of the IIR are currently set. The
- * EFR should contain zero. Try to read the EFR.
- */
-static void autoconfig_16550a(struct uart_8250_port *up)
-{
- unsigned char status1, status2;
- unsigned int iersave;
-
- up->port.type = PORT_16550A;
- up->capabilities |= UART_CAP_FIFO;
-
- /*
- * XR17V35x UARTs have an extra divisor register, DLD
- * that gets enabled with when DLAB is set which will
- * cause the device to incorrectly match and assign
- * port type to PORT_16650. The EFR for this UART is
- * found at offset 0x09. Instead check the Deice ID (DVID)
- * register for a 2, 4 or 8 port UART.
- */
- if (up->port.flags & UPF_EXAR_EFR) {
- status1 = serial_in(up, UART_EXAR_DVID);
- if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) {
- DEBUG_AUTOCONF("Exar XR17V35x ");
- up->port.type = PORT_XR17V35X;
- up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP;
-
- return;
- }
-
- }
-
- /*
- * Check for presence of the EFR when DLAB is set.
- * Only ST16C650V1 UARTs pass this test.
- */
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- if (serial_in(up, UART_EFR) == 0) {
- serial_out(up, UART_EFR, 0xA8);
- if (serial_in(up, UART_EFR) != 0) {
- DEBUG_AUTOCONF("EFRv1 ");
- up->port.type = PORT_16650;
- up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
- } else {
- DEBUG_AUTOCONF("Motorola 8xxx DUART ");
- }
- serial_out(up, UART_EFR, 0);
- return;
- }
-
- /*
- * Maybe it requires 0xbf to be written to the LCR.
- * (other ST16C650V2 UARTs, TI16C752A, etc)
- */
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
- DEBUG_AUTOCONF("EFRv2 ");
- autoconfig_has_efr(up);
- return;
- }
-
- /*
- * Check for a National Semiconductor SuperIO chip.
- * Attempt to switch to bank 2, read the value of the LOOP bit
- * from EXCR1. Switch back to bank 0, change it in MCR. Then
- * switch back to bank 2, read it from EXCR1 again and check
- * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
- */
- serial_out(up, UART_LCR, 0);
- status1 = serial_in(up, UART_MCR);
- serial_out(up, UART_LCR, 0xE0);
- status2 = serial_in(up, 0x02); /* EXCR1 */
-
- if (!((status2 ^ status1) & UART_MCR_LOOP)) {
- serial_out(up, UART_LCR, 0);
- serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP);
- serial_out(up, UART_LCR, 0xE0);
- status2 = serial_in(up, 0x02); /* EXCR1 */
- serial_out(up, UART_LCR, 0);
- serial_out(up, UART_MCR, status1);
-
- if ((status2 ^ status1) & UART_MCR_LOOP) {
- unsigned short quot;
-
- serial_out(up, UART_LCR, 0xE0);
-
- quot = serial_dl_read(up);
- quot <<= 3;
-
- if (ns16550a_goto_highspeed(up))
- serial_dl_write(up, quot);
-
- serial_out(up, UART_LCR, 0);
-
- up->port.uartclk = 921600*16;
- up->port.type = PORT_NS16550A;
- up->capabilities |= UART_NATSEMI;
- return;
- }
- }
-
- /*
- * No EFR. Try to detect a TI16750, which only sets bit 5 of
- * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
- * Try setting it with and without DLAB set. Cheap clones
- * set bit 5 without DLAB set.
- */
- serial_out(up, UART_LCR, 0);
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
- status1 = serial_in(up, UART_IIR) >> 5;
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
- status2 = serial_in(up, UART_IIR) >> 5;
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_out(up, UART_LCR, 0);
-
- DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
-
- if (status1 == 6 && status2 == 7) {
- up->port.type = PORT_16750;
- up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
- return;
- }
-
- /*
- * Try writing and reading the UART_IER_UUE bit (b6).
- * If it works, this is probably one of the Xscale platform's
- * internal UARTs.
- * We're going to explicitly set the UUE bit to 0 before
- * trying to write and read a 1 just to make sure it's not
- * already a 1 and maybe locked there before we even start start.
- */
- iersave = serial_in(up, UART_IER);
- serial_out(up, UART_IER, iersave & ~UART_IER_UUE);
- if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
- /*
- * OK it's in a known zero state, try writing and reading
- * without disturbing the current state of the other bits.
- */
- serial_out(up, UART_IER, iersave | UART_IER_UUE);
- if (serial_in(up, UART_IER) & UART_IER_UUE) {
- /*
- * It's an Xscale.
- * We'll leave the UART_IER_UUE bit set to 1 (enabled).
- */
- DEBUG_AUTOCONF("Xscale ");
- up->port.type = PORT_XSCALE;
- up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
- return;
- }
- } else {
- /*
- * If we got here we couldn't force the IER_UUE bit to 0.
- * Log it and continue.
- */
- DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
- }
- serial_out(up, UART_IER, iersave);
-
- /*
- * Exar uarts have EFR in a weird location
- */
- if (up->port.flags & UPF_EXAR_EFR) {
- DEBUG_AUTOCONF("Exar XR17D15x ");
- up->port.type = PORT_XR17D15X;
- up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP;
-
- return;
- }
-
- /*
- * We distinguish between 16550A and U6 16550A by counting
- * how many bytes are in the FIFO.
- */
- if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
- up->port.type = PORT_U6_16550A;
- up->capabilities |= UART_CAP_AFE;
- }
-}
-
-/*
- * This routine is called by rs_init() to initialize a specific serial
- * port. It determines what type of UART chip this serial port is
- * using: 8250, 16450, 16550, 16550A. The important question is
- * whether or not this UART is a 16550A or not, since this will
- * determine whether or not we can use its FIFO features or not.
- */
-static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
-{
- unsigned char status1, scratch, scratch2, scratch3;
- unsigned char save_lcr, save_mcr;
- struct uart_port *port = &up->port;
- unsigned long flags;
- unsigned int old_capabilities;
-
- if (!port->iobase && !port->mapbase && !port->membase)
- return;
-
- DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
- serial_index(port), port->iobase, port->membase);
-
- /*
- * We really do need global IRQs disabled here - we're going to
- * be frobbing the chips IRQ enable register to see if it exists.
- */
- spin_lock_irqsave(&port->lock, flags);
-
- up->capabilities = 0;
- up->bugs = 0;
-
- if (!(port->flags & UPF_BUGGY_UART)) {
- /*
- * Do a simple existence test first; if we fail this,
- * there's no point trying anything else.
- *
- * 0x80 is used as a nonsense port to prevent against
- * false positives due to ISA bus float. The
- * assumption is that 0x80 is a non-existent port;
- * which should be safe since include/asm/io.h also
- * makes this assumption.
- *
- * Note: this is safe as long as MCR bit 4 is clear
- * and the device is in "PC" mode.
- */
- scratch = serial_in(up, UART_IER);
- serial_out(up, UART_IER, 0);
-#ifdef __i386__
- outb(0xff, 0x080);
-#endif
- /*
- * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
- * 16C754B) allow only to modify them if an EFR bit is set.
- */
- scratch2 = serial_in(up, UART_IER) & 0x0f;
- serial_out(up, UART_IER, 0x0F);
-#ifdef __i386__
- outb(0, 0x080);
-#endif
- scratch3 = serial_in(up, UART_IER) & 0x0f;
- serial_out(up, UART_IER, scratch);
- if (scratch2 != 0 || scratch3 != 0x0F) {
- /*
- * We failed; there's nothing here
- */
- spin_unlock_irqrestore(&port->lock, flags);
- DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
- scratch2, scratch3);
- goto out;
- }
- }
-
- save_mcr = serial_in(up, UART_MCR);
- save_lcr = serial_in(up, UART_LCR);
-
- /*
- * Check to see if a UART is really there. Certain broken
- * internal modems based on the Rockwell chipset fail this
- * test, because they apparently don't implement the loopback
- * test mode. So this test is skipped on the COM 1 through
- * COM 4 ports. This *should* be safe, since no board
- * manufacturer would be stupid enough to design a board
- * that conflicts with COM 1-4 --- we hope!
- */
- if (!(port->flags & UPF_SKIP_TEST)) {
- serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A);
- status1 = serial_in(up, UART_MSR) & 0xF0;
- serial_out(up, UART_MCR, save_mcr);
- if (status1 != 0x90) {
- spin_unlock_irqrestore(&port->lock, flags);
- DEBUG_AUTOCONF("LOOP test failed (%02x) ",
- status1);
- goto out;
- }
- }
-
- /*
- * We're pretty sure there's a port here. Lets find out what
- * type of port it is. The IIR top two bits allows us to find
- * out if it's 8250 or 16450, 16550, 16550A or later. This
- * determines what we test for next.
- *
- * We also initialise the EFR (if any) to zero for later. The
- * EFR occupies the same register location as the FCR and IIR.
- */
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, 0);
- serial_out(up, UART_LCR, 0);
-
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- scratch = serial_in(up, UART_IIR) >> 6;
-
- switch (scratch) {
- case 0:
- autoconfig_8250(up);
- break;
- case 1:
- port->type = PORT_UNKNOWN;
- break;
- case 2:
- port->type = PORT_16550;
- break;
- case 3:
- autoconfig_16550a(up);
- break;
- }
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * Only probe for RSA ports if we got the region.
- */
- if (port->type == PORT_16550A && probeflags & PROBE_RSA) {
- int i;
-
- for (i = 0 ; i < probe_rsa_count; ++i) {
- if (probe_rsa[i] == port->iobase && __enable_rsa(up)) {
- port->type = PORT_RSA;
- break;
- }
- }
- }
-#endif
-
- serial_out(up, UART_LCR, save_lcr);
-
- port->fifosize = uart_config[up->port.type].fifo_size;
- old_capabilities = up->capabilities;
- up->capabilities = uart_config[port->type].flags;
- up->tx_loadsz = uart_config[port->type].tx_loadsz;
-
- if (port->type == PORT_UNKNOWN)
- goto out_lock;
-
- /*
- * Reset the UART.
- */
-#ifdef CONFIG_SERIAL_8250_RSA
- if (port->type == PORT_RSA)
- serial_out(up, UART_RSA_FRR, 0);
-#endif
- serial_out(up, UART_MCR, save_mcr);
- serial8250_clear_fifos(up);
- serial_in(up, UART_RX);
- if (up->capabilities & UART_CAP_UUE)
- serial_out(up, UART_IER, UART_IER_UUE);
- else
- serial_out(up, UART_IER, 0);
-
-out_lock:
- spin_unlock_irqrestore(&port->lock, flags);
- if (up->capabilities != old_capabilities) {
- printk(KERN_WARNING
- "ttyS%d: detected caps %08x should be %08x\n",
- serial_index(port), old_capabilities,
- up->capabilities);
- }
-out:
- DEBUG_AUTOCONF("iir=%d ", scratch);
- DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name);
-}
-
-static void autoconfig_irq(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned char save_mcr, save_ier;
- unsigned char save_ICP = 0;
- unsigned int ICP = 0;
- unsigned long irqs;
- int irq;
-
- if (port->flags & UPF_FOURPORT) {
- ICP = (port->iobase & 0xfe0) | 0x1f;
- save_ICP = inb_p(ICP);
- outb_p(0x80, ICP);
- inb_p(ICP);
- }
-
- /* forget possible initially masked and pending IRQ */
- probe_irq_off(probe_irq_on());
- save_mcr = serial_in(up, UART_MCR);
- save_ier = serial_in(up, UART_IER);
- serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
-
- irqs = probe_irq_on();
- serial_out(up, UART_MCR, 0);
- udelay(10);
- if (port->flags & UPF_FOURPORT) {
- serial_out(up, UART_MCR,
- UART_MCR_DTR | UART_MCR_RTS);
- } else {
- serial_out(up, UART_MCR,
- UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
- }
- serial_out(up, UART_IER, 0x0f); /* enable all intrs */
- serial_in(up, UART_LSR);
- serial_in(up, UART_RX);
- serial_in(up, UART_IIR);
- serial_in(up, UART_MSR);
- serial_out(up, UART_TX, 0xFF);
- udelay(20);
- irq = probe_irq_off(irqs);
-
- serial_out(up, UART_MCR, save_mcr);
- serial_out(up, UART_IER, save_ier);
-
- if (port->flags & UPF_FOURPORT)
- outb_p(save_ICP, ICP);
-
- port->irq = (irq > 0) ? irq : 0;
-}
-
-static inline void __stop_tx(struct uart_8250_port *p)
-{
- if (p->ier & UART_IER_THRI) {
- p->ier &= ~UART_IER_THRI;
- serial_out(p, UART_IER, p->ier);
- }
-}
-
-static void serial8250_stop_tx(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- __stop_tx(up);
-
- /*
- * We really want to stop the transmitter from sending.
- */
- if (port->type == PORT_16C950) {
- up->acr |= UART_ACR_TXDIS;
- serial_icr_write(up, UART_ACR, up->acr);
- }
-}
-
-static void serial8250_start_tx(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- if (up->dma && !serial8250_tx_dma(up)) {
- return;
- } else if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_port_out(port, UART_IER, up->ier);
-
- if (up->bugs & UART_BUG_TXEN) {
- unsigned char lsr;
- lsr = serial_in(up, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- if (lsr & UART_LSR_TEMT)
- serial8250_tx_chars(up);
- }
- }
-
- /*
- * Re-enable the transmitter if we disabled it.
- */
- if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
- up->acr &= ~UART_ACR_TXDIS;
- serial_icr_write(up, UART_ACR, up->acr);
- }
-}
-
-static void serial8250_stop_rx(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- up->ier &= ~UART_IER_RLSI;
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_port_out(port, UART_IER, up->ier);
-}
-
-static void serial8250_enable_ms(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- /* no MSR capabilities */
- if (up->bugs & UART_BUG_NOMSR)
- return;
-
- up->ier |= UART_IER_MSI;
- serial_port_out(port, UART_IER, up->ier);
-}
-
-/*
- * serial8250_rx_chars: processes according to the passed in LSR
- * value, and returns the remaining LSR bits not handled
- * by this Rx routine.
- */
-unsigned char
-serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
-{
- struct uart_port *port = &up->port;
- unsigned char ch;
- int max_count = 256;
- char flag;
-
- do {
- if (likely(lsr & UART_LSR_DR))
- ch = serial_in(up, UART_RX);
- else
- /*
- * Intel 82571 has a Serial Over Lan device that will
- * set UART_LSR_BI without setting UART_LSR_DR when
- * it receives a break. To avoid reading from the
- * receive buffer without UART_LSR_DR bit set, we
- * just force the read character to be 0
- */
- ch = 0;
-
- flag = TTY_NORMAL;
- port->icount.rx++;
-
- lsr |= up->lsr_saved_flags;
- up->lsr_saved_flags = 0;
-
- if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
- if (lsr & UART_LSR_BI) {
- lsr &= ~(UART_LSR_FE | UART_LSR_PE);
- port->icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(port))
- goto ignore_char;
- } else if (lsr & UART_LSR_PE)
- port->icount.parity++;
- else if (lsr & UART_LSR_FE)
- port->icount.frame++;
- if (lsr & UART_LSR_OE)
- port->icount.overrun++;
-
- /*
- * Mask off conditions which should be ignored.
- */
- lsr &= port->read_status_mask;
-
- if (lsr & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
- flag = TTY_BREAK;
- } else if (lsr & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (lsr & UART_LSR_FE)
- flag = TTY_FRAME;
- }
- if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
-
- uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
-
-ignore_char:
- lsr = serial_in(up, UART_LSR);
- } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
- spin_unlock(&port->lock);
- tty_flip_buffer_push(&port->state->port);
- spin_lock(&port->lock);
- return lsr;
-}
-EXPORT_SYMBOL_GPL(serial8250_rx_chars);
-
-void serial8250_tx_chars(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- serial_out(up, UART_TX, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
- if (uart_tx_stopped(port)) {
- serial8250_stop_tx(port);
- return;
- }
- if (uart_circ_empty(xmit)) {
- __stop_tx(up);
- return;
- }
-
- count = up->tx_loadsz;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- if (up->capabilities & UART_CAP_HFIFO) {
- if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
- BOTH_EMPTY)
- break;
- }
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- DEBUG_INTR("THRE...");
-
- if (uart_circ_empty(xmit))
- __stop_tx(up);
-}
-EXPORT_SYMBOL_GPL(serial8250_tx_chars);
-
-unsigned int serial8250_modem_status(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned int status = serial_in(up, UART_MSR);
-
- status |= up->msr_saved_flags;
- up->msr_saved_flags = 0;
- if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
- port->state != NULL) {
- if (status & UART_MSR_TERI)
- port->icount.rng++;
- if (status & UART_MSR_DDSR)
- port->icount.dsr++;
- if (status & UART_MSR_DDCD)
- uart_handle_dcd_change(port, status & UART_MSR_DCD);
- if (status & UART_MSR_DCTS)
- uart_handle_cts_change(port, status & UART_MSR_CTS);
-
- wake_up_interruptible(&port->state->port.delta_msr_wait);
- }
-
- return status;
-}
-EXPORT_SYMBOL_GPL(serial8250_modem_status);
-
-/*
- * This handles the interrupt from one port.
- */
-int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
-{
- unsigned char status;
- unsigned long flags;
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- int dma_err = 0;
-
- if (iir & UART_IIR_NO_INT)
- return 0;
-
- spin_lock_irqsave(&port->lock, flags);
-
- status = serial_port_in(port, UART_LSR);
-
- DEBUG_INTR("status = %x...", status);
-
- if (status & (UART_LSR_DR | UART_LSR_BI)) {
- if (up->dma)
- dma_err = serial8250_rx_dma(up, iir);
-
- if (!up->dma || dma_err)
- status = serial8250_rx_chars(up, status);
- }
- serial8250_modem_status(up);
- if (status & UART_LSR_THRE)
- serial8250_tx_chars(up);
-
- spin_unlock_irqrestore(&port->lock, flags);
- return 1;
-}
-EXPORT_SYMBOL_GPL(serial8250_handle_irq);
-
-static int serial8250_default_handle_irq(struct uart_port *port)
-{
- unsigned int iir = serial_port_in(port, UART_IIR);
-
- return serial8250_handle_irq(port, iir);
-}
-
-/*
- * These Exar UARTs have an extra interrupt indicator that could
- * fire for a few unimplemented interrupts. One of which is a
- * wakeup event when coming out of sleep. Put this here just
- * to be on the safe side that these interrupts don't go unhandled.
- */
-static int exar_handle_irq(struct uart_port *port)
-{
- unsigned char int0, int1, int2, int3;
- unsigned int iir = serial_port_in(port, UART_IIR);
- int ret;
-
- ret = serial8250_handle_irq(port, iir);
-
- if ((port->type == PORT_XR17V35X) ||
- (port->type == PORT_XR17D15X)) {
- int0 = serial_port_in(port, 0x80);
- int1 = serial_port_in(port, 0x81);
- int2 = serial_port_in(port, 0x82);
- int3 = serial_port_in(port, 0x83);
- }
-
- return ret;
-}
-
-/*
- * This is the serial driver's interrupt routine.
- *
- * Arjan thinks the old way was overly complex, so it got simplified.
- * Alan disagrees, saying that need the complexity to handle the weird
- * nature of ISA shared interrupts. (This is a special exception.)
- *
- * In order to handle ISA shared interrupts properly, we need to check
- * that all ports have been serviced, and therefore the ISA interrupt
- * line has been de-asserted.
- *
- * This means we need to loop through all ports. checking that they
- * don't have an interrupt pending.
- */
-static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
-{
- struct irq_info *i = dev_id;
- struct list_head *l, *end = NULL;
- int pass_counter = 0, handled = 0;
-
- DEBUG_INTR("serial8250_interrupt(%d)...", irq);
-
- spin_lock(&i->lock);
-
- l = i->head;
- do {
- struct uart_8250_port *up;
- struct uart_port *port;
-
- up = list_entry(l, struct uart_8250_port, list);
- port = &up->port;
-
- if (port->handle_irq(port)) {
- handled = 1;
- end = NULL;
- } else if (end == NULL)
- end = l;
-
- l = l->next;
-
- if (l == i->head && pass_counter++ > PASS_LIMIT) {
- /* If we hit this, we're dead. */
- printk_ratelimited(KERN_ERR
- "serial8250: too much work for irq%d\n", irq);
- break;
- }
- } while (l != end);
-
- spin_unlock(&i->lock);
-
- DEBUG_INTR("end.\n");
-
- return IRQ_RETVAL(handled);
-}
-
-/*
- * To support ISA shared interrupts, we need to have one interrupt
- * handler that ensures that the IRQ line has been deasserted
- * before returning. Failing to do this will result in the IRQ
- * line being stuck active, and, since ISA irqs are edge triggered,
- * no more IRQs will be seen.
- */
-static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
-{
- spin_lock_irq(&i->lock);
-
- if (!list_empty(i->head)) {
- if (i->head == &up->list)
- i->head = i->head->next;
- list_del(&up->list);
- } else {
- BUG_ON(i->head != &up->list);
- i->head = NULL;
- }
- spin_unlock_irq(&i->lock);
- /* List empty so throw away the hash node */
- if (i->head == NULL) {
- hlist_del(&i->node);
- kfree(i);
- }
-}
-
-static int serial_link_irq_chain(struct uart_8250_port *up)
-{
- struct hlist_head *h;
- struct hlist_node *n;
- struct irq_info *i;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
-
- mutex_lock(&hash_mutex);
-
- h = &irq_lists[up->port.irq % NR_IRQ_HASH];
-
- hlist_for_each(n, h) {
- i = hlist_entry(n, struct irq_info, node);
- if (i->irq == up->port.irq)
- break;
- }
-
- if (n == NULL) {
- i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
- if (i == NULL) {
- mutex_unlock(&hash_mutex);
- return -ENOMEM;
- }
- spin_lock_init(&i->lock);
- i->irq = up->port.irq;
- hlist_add_head(&i->node, h);
- }
- mutex_unlock(&hash_mutex);
-
- spin_lock_irq(&i->lock);
-
- if (i->head) {
- list_add(&up->list, i->head);
- spin_unlock_irq(&i->lock);
-
- ret = 0;
- } else {
- INIT_LIST_HEAD(&up->list);
- i->head = &up->list;
- spin_unlock_irq(&i->lock);
- irq_flags |= up->port.irqflags;
- ret = request_irq(up->port.irq, serial8250_interrupt,
- irq_flags, "serial", i);
- if (ret < 0)
- serial_do_unlink(i, up);
- }
-
- return ret;
-}
-
-static void serial_unlink_irq_chain(struct uart_8250_port *up)
-{
- struct irq_info *i;
- struct hlist_node *n;
- struct hlist_head *h;
-
- mutex_lock(&hash_mutex);
-
- h = &irq_lists[up->port.irq % NR_IRQ_HASH];
-
- hlist_for_each(n, h) {
- i = hlist_entry(n, struct irq_info, node);
- if (i->irq == up->port.irq)
- break;
- }
-
- BUG_ON(n == NULL);
- BUG_ON(i->head == NULL);
-
- if (list_empty(i->head))
- free_irq(up->port.irq, i);
-
- serial_do_unlink(i, up);
- mutex_unlock(&hash_mutex);
-}
-
-/*
- * This function is used to handle ports that do not have an
- * interrupt. This doesn't work very well for 16450's, but gives
- * barely passable results for a 16550A. (Although at the expense
- * of much CPU overhead).
- */
-static void serial8250_timeout(unsigned long data)
-{
- struct uart_8250_port *up = (struct uart_8250_port *)data;
-
- up->port.handle_irq(&up->port);
- mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
-}
-
-static void serial8250_backup_timeout(unsigned long data)
-{
- struct uart_8250_port *up = (struct uart_8250_port *)data;
- unsigned int iir, ier = 0, lsr;
- unsigned long flags;
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- /*
- * Must disable interrupts or else we risk racing with the interrupt
- * based handler.
- */
- if (up->port.irq) {
- ier = serial_in(up, UART_IER);
- serial_out(up, UART_IER, 0);
- }
-
- iir = serial_in(up, UART_IIR);
-
- /*
- * This should be a safe test for anyone who doesn't trust the
- * IIR bits on their UART, but it's specifically designed for
- * the "Diva" UART used on the management processor on many HP
- * ia64 and parisc boxes.
- */
- lsr = serial_in(up, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
- (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
- (lsr & UART_LSR_THRE)) {
- iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
- iir |= UART_IIR_THRI;
- }
-
- if (!(iir & UART_IIR_NO_INT))
- serial8250_tx_chars(up);
-
- if (up->port.irq)
- serial_out(up, UART_IER, ier);
-
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- /* Standard timer interval plus 0.2s to keep the port running */
- mod_timer(&up->timer,
- jiffies + uart_poll_timeout(&up->port) + HZ / 5);
-}
-
-static unsigned int serial8250_tx_empty(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
- unsigned int lsr;
-
- spin_lock_irqsave(&port->lock, flags);
- lsr = serial_port_in(port, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- spin_unlock_irqrestore(&port->lock, flags);
-
- return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int serial8250_get_mctrl(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned int status;
- unsigned int ret;
-
- status = serial8250_modem_status(up);
-
- ret = 0;
- if (status & UART_MSR_DCD)
- ret |= TIOCM_CAR;
- if (status & UART_MSR_RI)
- ret |= TIOCM_RNG;
- if (status & UART_MSR_DSR)
- ret |= TIOCM_DSR;
- if (status & UART_MSR_CTS)
- ret |= TIOCM_CTS;
- return ret;
-}
-
-static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned char mcr = 0;
-
- if (mctrl & TIOCM_RTS)
- mcr |= UART_MCR_RTS;
- if (mctrl & TIOCM_DTR)
- mcr |= UART_MCR_DTR;
- if (mctrl & TIOCM_OUT1)
- mcr |= UART_MCR_OUT1;
- if (mctrl & TIOCM_OUT2)
- mcr |= UART_MCR_OUT2;
- if (mctrl & TIOCM_LOOP)
- mcr |= UART_MCR_LOOP;
-
- mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
-
- serial_port_out(port, UART_MCR, mcr);
-}
-
-static void serial8250_break_ctl(struct uart_port *port, int break_state)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
- if (break_state == -1)
- up->lcr |= UART_LCR_SBC;
- else
- up->lcr &= ~UART_LCR_SBC;
- serial_port_out(port, UART_LCR, up->lcr);
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/*
- * Wait for transmitter & holding register to empty
- */
-static void wait_for_xmitr(struct uart_8250_port *up, int bits)
-{
- unsigned int status, tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- for (;;) {
- status = serial_in(up, UART_LSR);
-
- up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
-
- if ((status & bits) == bits)
- break;
- if (--tmout == 0)
- break;
- udelay(1);
- }
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- unsigned int tmout;
- for (tmout = 1000000; tmout; tmout--) {
- unsigned int msr = serial_in(up, UART_MSR);
- up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
- if (msr & UART_MSR_CTS)
- break;
- udelay(1);
- touch_nmi_watchdog();
- }
- }
-}
-
-#ifdef CONFIG_CONSOLE_POLL
-/*
- * Console polling routines for writing and reading from the uart while
- * in an interrupt or debug context.
- */
-
-static int serial8250_get_poll_char(struct uart_port *port)
-{
- unsigned char lsr = serial_port_in(port, UART_LSR);
-
- if (!(lsr & UART_LSR_DR))
- return NO_POLL_CHAR;
-
- return serial_port_in(port, UART_RX);
-}
-
-
-static void serial8250_put_poll_char(struct uart_port *port,
- unsigned char c)
-{
- unsigned int ier;
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- /*
- * First save the IER then disable the interrupts
- */
- ier = serial_port_in(port, UART_IER);
- if (up->capabilities & UART_CAP_UUE)
- serial_port_out(port, UART_IER, UART_IER_UUE);
- else
- serial_port_out(port, UART_IER, 0);
-
- wait_for_xmitr(up, BOTH_EMPTY);
- /*
- * Send the character out.
- * If a LF, also do CR...
- */
- serial_port_out(port, UART_TX, c);
- if (c == 10) {
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_port_out(port, UART_TX, 13);
- }
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_port_out(port, UART_IER, ier);
-}
-
-#endif /* CONFIG_CONSOLE_POLL */
-
-static int serial8250_startup(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
- unsigned char lsr, iir;
- int retval;
-
- if (port->type == PORT_8250_CIR)
- return -ENODEV;
-
- if (!port->fifosize)
- port->fifosize = uart_config[port->type].fifo_size;
- if (!up->tx_loadsz)
- up->tx_loadsz = uart_config[port->type].tx_loadsz;
- if (!up->capabilities)
- up->capabilities = uart_config[port->type].flags;
- up->mcr = 0;
-
- if (port->iotype != up->cur_iotype)
- set_io_from_upio(port);
-
- if (port->type == PORT_16C950) {
- /* Wake up and initialize UART */
- up->acr = 0;
- serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_port_out(port, UART_EFR, UART_EFR_ECB);
- serial_port_out(port, UART_IER, 0);
- serial_port_out(port, UART_LCR, 0);
- serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
- serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_port_out(port, UART_EFR, UART_EFR_ECB);
- serial_port_out(port, UART_LCR, 0);
- }
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * If this is an RSA port, see if we can kick it up to the
- * higher speed clock.
- */
- enable_rsa(up);
-#endif
-
- /*
- * Clear the FIFO buffers and disable them.
- * (they will be reenabled in set_termios())
- */
- serial8250_clear_fifos(up);
-
- /*
- * Clear the interrupt registers.
- */
- serial_port_in(port, UART_LSR);
- serial_port_in(port, UART_RX);
- serial_port_in(port, UART_IIR);
- serial_port_in(port, UART_MSR);
-
- /*
- * At this point, there's no way the LSR could still be 0xff;
- * if it is, then bail out, because there's likely no UART
- * here.
- */
- if (!(port->flags & UPF_BUGGY_UART) &&
- (serial_port_in(port, UART_LSR) == 0xff)) {
- printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
- serial_index(port));
- return -ENODEV;
- }
-
- /*
- * For a XR16C850, we need to set the trigger levels
- */
- if (port->type == PORT_16850) {
- unsigned char fctr;
-
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
-
- fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
- serial_port_out(port, UART_FCTR,
- fctr | UART_FCTR_TRGD | UART_FCTR_RX);
- serial_port_out(port, UART_TRG, UART_TRG_96);
- serial_port_out(port, UART_FCTR,
- fctr | UART_FCTR_TRGD | UART_FCTR_TX);
- serial_port_out(port, UART_TRG, UART_TRG_96);
-
- serial_port_out(port, UART_LCR, 0);
- }
-
- if (port->irq) {
- unsigned char iir1;
- /*
- * Test for UARTs that do not reassert THRE when the
- * transmitter is idle and the interrupt has already
- * been cleared. Real 16550s should always reassert
- * this interrupt whenever the transmitter is idle and
- * the interrupt is enabled. Delays are necessary to
- * allow register changes to become visible.
- */
- spin_lock_irqsave(&port->lock, flags);
- if (up->port.irqflags & IRQF_SHARED)
- disable_irq_nosync(port->irq);
-
- wait_for_xmitr(up, UART_LSR_THRE);
- serial_port_out_sync(port, UART_IER, UART_IER_THRI);
- udelay(1); /* allow THRE to set */
- iir1 = serial_port_in(port, UART_IIR);
- serial_port_out(port, UART_IER, 0);
- serial_port_out_sync(port, UART_IER, UART_IER_THRI);
- udelay(1); /* allow a working UART time to re-assert THRE */
- iir = serial_port_in(port, UART_IIR);
- serial_port_out(port, UART_IER, 0);
-
- if (port->irqflags & IRQF_SHARED)
- enable_irq(port->irq);
- spin_unlock_irqrestore(&port->lock, flags);
-
- /*
- * If the interrupt is not reasserted, or we otherwise
- * don't trust the iir, setup a timer to kick the UART
- * on a regular basis.
- */
- if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
- up->port.flags & UPF_BUG_THRE) {
- up->bugs |= UART_BUG_THRE;
- pr_debug("ttyS%d - using backup timer\n",
- serial_index(port));
- }
- }
-
- /*
- * The above check will only give an accurate result the first time
- * the port is opened so this value needs to be preserved.
- */
- if (up->bugs & UART_BUG_THRE) {
- up->timer.function = serial8250_backup_timeout;
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies +
- uart_poll_timeout(port) + HZ / 5);
- }
-
- /*
- * If the "interrupt" for this port doesn't correspond with any
- * hardware interrupt, we use a timer-based system. The original
- * driver used to do this with IRQ0.
- */
- if (!port->irq) {
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
- } else {
- retval = serial_link_irq_chain(up);
- if (retval)
- return retval;
- }
-
- /*
- * Now, initialize the UART
- */
- serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
-
- spin_lock_irqsave(&port->lock, flags);
- if (up->port.flags & UPF_FOURPORT) {
- if (!up->port.irq)
- up->port.mctrl |= TIOCM_OUT1;
- } else
- /*
- * Most PC uarts need OUT2 raised to enable interrupts.
- */
- if (port->irq)
- up->port.mctrl |= TIOCM_OUT2;
-
- serial8250_set_mctrl(port, port->mctrl);
-
- /* Serial over Lan (SoL) hack:
- Intel 8257x Gigabit ethernet chips have a
- 16550 emulation, to be used for Serial Over Lan.
- Those chips take a longer time than a normal
- serial device to signalize that a transmission
- data was queued. Due to that, the above test generally
- fails. One solution would be to delay the reading of
- iir. However, this is not reliable, since the timeout
- is variable. So, let's just don't test if we receive
- TX irq. This way, we'll never enable UART_BUG_TXEN.
- */
- if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
- goto dont_test_tx_en;
-
- /*
- * Do a quick test to see if we receive an
- * interrupt when we enable the TX irq.
- */
- serial_port_out(port, UART_IER, UART_IER_THRI);
- lsr = serial_port_in(port, UART_LSR);
- iir = serial_port_in(port, UART_IIR);
- serial_port_out(port, UART_IER, 0);
-
- if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
- if (!(up->bugs & UART_BUG_TXEN)) {
- up->bugs |= UART_BUG_TXEN;
- pr_debug("ttyS%d - enabling bad tx status workarounds\n",
- serial_index(port));
- }
- } else {
- up->bugs &= ~UART_BUG_TXEN;
- }
-
-dont_test_tx_en:
- spin_unlock_irqrestore(&port->lock, flags);
-
- /*
- * Clear the interrupt registers again for luck, and clear the
- * saved flags to avoid getting false values from polling
- * routines or the previous session.
- */
- serial_port_in(port, UART_LSR);
- serial_port_in(port, UART_RX);
- serial_port_in(port, UART_IIR);
- serial_port_in(port, UART_MSR);
- up->lsr_saved_flags = 0;
- up->msr_saved_flags = 0;
-
- /*
- * Request DMA channels for both RX and TX.
- */
- if (up->dma) {
- retval = serial8250_request_dma(up);
- if (retval) {
- pr_warn_ratelimited("ttyS%d - failed to request DMA\n",
- serial_index(port));
- up->dma = NULL;
- }
- }
-
- /*
- * Finally, enable interrupts. Note: Modem status interrupts
- * are set via set_termios(), which will be occurring imminently
- * anyway, so we don't enable them here.
- */
- up->ier = UART_IER_RLSI | UART_IER_RDI;
- serial_port_out(port, UART_IER, up->ier);
-
- if (port->flags & UPF_FOURPORT) {
- unsigned int icp;
- /*
- * Enable interrupts on the AST Fourport board
- */
- icp = (port->iobase & 0xfe0) | 0x01f;
- outb_p(0x80, icp);
- inb_p(icp);
- }
-
- return 0;
-}
-
-static void serial8250_shutdown(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
-
- /*
- * Disable interrupts from this port
- */
- up->ier = 0;
- serial_port_out(port, UART_IER, 0);
-
- if (up->dma)
- serial8250_release_dma(up);
-
- spin_lock_irqsave(&port->lock, flags);
- if (port->flags & UPF_FOURPORT) {
- /* reset interrupts on the AST Fourport board */
- inb((port->iobase & 0xfe0) | 0x1f);
- port->mctrl |= TIOCM_OUT1;
- } else
- port->mctrl &= ~TIOCM_OUT2;
-
- serial8250_set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
-
- /*
- * Disable break condition and FIFOs
- */
- serial_port_out(port, UART_LCR,
- serial_port_in(port, UART_LCR) & ~UART_LCR_SBC);
- serial8250_clear_fifos(up);
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * Reset the RSA board back to 115kbps compat mode.
- */
- disable_rsa(up);
-#endif
-
- /*
- * Read data port to reset things, and then unlink from
- * the IRQ chain.
- */
- serial_port_in(port, UART_RX);
-
- del_timer_sync(&up->timer);
- up->timer.function = serial8250_timeout;
- if (port->irq)
- serial_unlink_irq_chain(up);
-}
-
-static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
-{
- unsigned int quot;
-
- /*
- * Handle magic divisors for baud rates above baud_base on
- * SMSC SuperIO chips.
- */
- if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
- baud == (port->uartclk/4))
- quot = 0x8001;
- else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
- baud == (port->uartclk/8))
- quot = 0x8002;
- else
- quot = uart_get_divisor(port, baud);
-
- return quot;
-}
-
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned char cval, fcr = 0;
- unsigned long flags;
- unsigned int baud, quot;
- int fifo_bug = 0;
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
-
- if (termios->c_cflag & CSTOPB)
- cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB) {
- cval |= UART_LCR_PARITY;
- if (up->bugs & UART_BUG_PARITY)
- fifo_bug = 1;
- }
- if (!(termios->c_cflag & PARODD))
- cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
- if (termios->c_cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
-#endif
-
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / 0xffff,
- port->uartclk / 16);
- quot = serial8250_get_divisor(port, baud);
-
- /*
- * Oxford Semi 952 rev B workaround
- */
- if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
- quot++;
-
- if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
- fcr = uart_config[port->type].fcr;
- if (baud < 2400 || fifo_bug) {
- fcr &= ~UART_FCR_TRIGGER_MASK;
- fcr |= UART_FCR_TRIGGER_1;
- }
- }
-
- /*
- * MCR-based auto flow control. When AFE is enabled, RTS will be
- * deasserted when the receive FIFO contains more characters than
- * the trigger, or the MCR RTS bit is cleared. In the case where
- * the remote UART is not using CTS auto flow control, we must
- * have sufficient FIFO entries for the latency of the remote
- * UART to respond. IOW, at least 32 bytes of FIFO.
- */
- if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {
- up->mcr &= ~UART_MCR_AFE;
- if (termios->c_cflag & CRTSCTS)
- up->mcr |= UART_MCR_AFE;
- }
-
- /*
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
- spin_lock_irqsave(&port->lock, flags);
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= UART_LSR_BI;
-
- /*
- * Characteres to ignore
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= UART_LSR_BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART_LSR_OE;
- }
-
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_LSR_DR;
-
- /*
- * CTS flow control flag and modem status interrupts
- */
- up->ier &= ~UART_IER_MSI;
- if (!(up->bugs & UART_BUG_NOMSR) &&
- UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
- if (up->capabilities & UART_CAP_UUE)
- up->ier |= UART_IER_UUE;
- if (up->capabilities & UART_CAP_RTOIE)
- up->ier |= UART_IER_RTOIE;
-
- serial_port_out(port, UART_IER, up->ier);
-
- if (up->capabilities & UART_CAP_EFR) {
- unsigned char efr = 0;
- /*
- * TI16C752/Startech hardware flow control. FIXME:
- * - TI16C752 requires control thresholds to be set.
- * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
- */
- if (termios->c_cflag & CRTSCTS)
- efr |= UART_EFR_CTS;
-
- serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
- if (port->flags & UPF_EXAR_EFR)
- serial_port_out(port, UART_XR_EFR, efr);
- else
- serial_port_out(port, UART_EFR, efr);
- }
-
- /* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (is_omap1510_8250(up)) {
- if (baud == 115200) {
- quot = 1;
- serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
- } else
- serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
- }
-
- /*
- * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
- * otherwise just set DLAB
- */
- if (up->capabilities & UART_NATSEMI)
- serial_port_out(port, UART_LCR, 0xe0);
- else
- serial_port_out(port, UART_LCR, cval | UART_LCR_DLAB);
-
- serial_dl_write(up, quot);
-
- /*
- * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
- * is written without DLAB set, this mode will be disabled.
- */
- if (port->type == PORT_16750)
- serial_port_out(port, UART_FCR, fcr);
-
- serial_port_out(port, UART_LCR, cval); /* reset DLAB */
- up->lcr = cval; /* Save LCR */
- if (port->type != PORT_16750) {
- /* emulated UARTs (Lucent Venus 167x) need two steps */
- if (fcr & UART_FCR_ENABLE_FIFO)
- serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_port_out(port, UART_FCR, fcr); /* set fcr */
- }
- serial8250_set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
- /* Don't rewrite B0 */
- if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
-}
-EXPORT_SYMBOL(serial8250_do_set_termios);
-
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- if (port->set_termios)
- port->set_termios(port, termios, old);
- else
- serial8250_do_set_termios(port, termios, old);
-}
-
-static void
-serial8250_set_ldisc(struct uart_port *port, int new)
-{
- if (new == N_PPS) {
- port->flags |= UPF_HARDPPS_CD;
- serial8250_enable_ms(port);
- } else
- port->flags &= ~UPF_HARDPPS_CD;
-}
-
-
-void serial8250_do_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct uart_8250_port *p =
- container_of(port, struct uart_8250_port, port);
-
- serial8250_set_sleep(p, state != 0);
-}
-EXPORT_SYMBOL(serial8250_do_pm);
-
-static void
-serial8250_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- if (port->pm)
- port->pm(port, state, oldstate);
- else
- serial8250_do_pm(port, state, oldstate);
-}
-
-static unsigned int serial8250_port_size(struct uart_8250_port *pt)
-{
- if (pt->port.iotype == UPIO_AU)
- return 0x1000;
- if (is_omap1_8250(pt))
- return 0x16 << pt->port.regshift;
-
- return 8 << pt->port.regshift;
-}
-
-/*
- * Resource handling.
- */
-static int serial8250_request_std_resource(struct uart_8250_port *up)
-{
- unsigned int size = serial8250_port_size(up);
- struct uart_port *port = &up->port;
- int ret = 0;
-
- switch (port->iotype) {
- case UPIO_AU:
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
- if (!port->mapbase)
- break;
-
- if (!request_mem_region(port->mapbase, size, "serial")) {
- ret = -EBUSY;
- break;
- }
-
- if (port->flags & UPF_IOREMAP) {
- port->membase = ioremap_nocache(port->mapbase, size);
- if (!port->membase) {
- release_mem_region(port->mapbase, size);
- ret = -ENOMEM;
- }
- }
- break;
-
- case UPIO_HUB6:
- case UPIO_PORT:
- if (!request_region(port->iobase, size, "serial"))
- ret = -EBUSY;
- break;
- }
- return ret;
-}
-
-static void serial8250_release_std_resource(struct uart_8250_port *up)
-{
- unsigned int size = serial8250_port_size(up);
- struct uart_port *port = &up->port;
-
- switch (port->iotype) {
- case UPIO_AU:
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
- if (!port->mapbase)
- break;
-
- if (port->flags & UPF_IOREMAP) {
- iounmap(port->membase);
- port->membase = NULL;
- }
-
- release_mem_region(port->mapbase, size);
- break;
-
- case UPIO_HUB6:
- case UPIO_PORT:
- release_region(port->iobase, size);
- break;
- }
-}
-
-static int serial8250_request_rsa_resource(struct uart_8250_port *up)
-{
- unsigned long start = UART_RSA_BASE << up->port.regshift;
- unsigned int size = 8 << up->port.regshift;
- struct uart_port *port = &up->port;
- int ret = -EINVAL;
-
- switch (port->iotype) {
- case UPIO_HUB6:
- case UPIO_PORT:
- start += port->iobase;
- if (request_region(start, size, "serial-rsa"))
- ret = 0;
- else
- ret = -EBUSY;
- break;
- }
-
- return ret;
-}
-
-static void serial8250_release_rsa_resource(struct uart_8250_port *up)
-{
- unsigned long offset = UART_RSA_BASE << up->port.regshift;
- unsigned int size = 8 << up->port.regshift;
- struct uart_port *port = &up->port;
-
- switch (port->iotype) {
- case UPIO_HUB6:
- case UPIO_PORT:
- release_region(port->iobase + offset, size);
- break;
- }
-}
-
-static void serial8250_release_port(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- serial8250_release_std_resource(up);
- if (port->type == PORT_RSA)
- serial8250_release_rsa_resource(up);
-}
-
-static int serial8250_request_port(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- int ret;
-
- if (port->type == PORT_8250_CIR)
- return -ENODEV;
-
- ret = serial8250_request_std_resource(up);
- if (ret == 0 && port->type == PORT_RSA) {
- ret = serial8250_request_rsa_resource(up);
- if (ret < 0)
- serial8250_release_std_resource(up);
- }
-
- return ret;
-}
-
-static void serial8250_config_port(struct uart_port *port, int flags)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- int probeflags = PROBE_ANY;
- int ret;
-
- if (port->type == PORT_8250_CIR)
- return;
-
- /*
- * Find the region that we can probe for. This in turn
- * tells us whether we can probe for the type of port.
- */
- ret = serial8250_request_std_resource(up);
- if (ret < 0)
- return;
-
- ret = serial8250_request_rsa_resource(up);
- if (ret < 0)
- probeflags &= ~PROBE_RSA;
-
- if (port->iotype != up->cur_iotype)
- set_io_from_upio(port);
-
- if (flags & UART_CONFIG_TYPE)
- autoconfig(up, probeflags);
-
- /* if access method is AU, it is a 16550 with a quirk */
- if (port->type == PORT_16550A && port->iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
-
- if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
- autoconfig_irq(up);
-
- if (port->type != PORT_RSA && probeflags & PROBE_RSA)
- serial8250_release_rsa_resource(up);
- if (port->type == PORT_UNKNOWN)
- serial8250_release_std_resource(up);
-
- /* Fixme: probably not the best place for this */
- if ((port->type == PORT_XR17V35X) ||
- (port->type == PORT_XR17D15X))
- port->handle_irq = exar_handle_irq;
-}
-
-static int
-serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- if (ser->irq >= nr_irqs || ser->irq < 0 ||
- ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
- ser->type == PORT_STARTECH)
- return -EINVAL;
- return 0;
-}
-
-static const char *
-serial8250_type(struct uart_port *port)
-{
- int type = port->type;
-
- if (type >= ARRAY_SIZE(uart_config))
- type = 0;
- return uart_config[type].name;
-}
-
-static struct uart_ops serial8250_pops = {
- .tx_empty = serial8250_tx_empty,
- .set_mctrl = serial8250_set_mctrl,
- .get_mctrl = serial8250_get_mctrl,
- .stop_tx = serial8250_stop_tx,
- .start_tx = serial8250_start_tx,
- .stop_rx = serial8250_stop_rx,
- .enable_ms = serial8250_enable_ms,
- .break_ctl = serial8250_break_ctl,
- .startup = serial8250_startup,
- .shutdown = serial8250_shutdown,
- .set_termios = serial8250_set_termios,
- .set_ldisc = serial8250_set_ldisc,
- .pm = serial8250_pm,
- .type = serial8250_type,
- .release_port = serial8250_release_port,
- .request_port = serial8250_request_port,
- .config_port = serial8250_config_port,
- .verify_port = serial8250_verify_port,
-#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = serial8250_get_poll_char,
- .poll_put_char = serial8250_put_poll_char,
-#endif
-};
-
-static struct uart_8250_port serial8250_ports[UART_NR];
-
-static void (*serial8250_isa_config)(int port, struct uart_port *up,
- unsigned short *capabilities);
-
-void serial8250_set_isa_configurator(
- void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
-{
- serial8250_isa_config = v;
-}
-EXPORT_SYMBOL(serial8250_set_isa_configurator);
-
-static void __init serial8250_isa_init_ports(void)
-{
- struct uart_8250_port *up;
- static int first = 1;
- int i, irqflag = 0;
-
- if (!first)
- return;
- first = 0;
-
- if (nr_uarts > UART_NR)
- nr_uarts = UART_NR;
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
- struct uart_port *port = &up->port;
-
- port->line = i;
- spin_lock_init(&port->lock);
-
- init_timer(&up->timer);
- up->timer.function = serial8250_timeout;
- up->cur_iotype = 0xFF;
-
- /*
- * ALPHA_KLUDGE_MCR needs to be killed.
- */
- up->mcr_mask = ~ALPHA_KLUDGE_MCR;
- up->mcr_force = ALPHA_KLUDGE_MCR;
-
- port->ops = &serial8250_pops;
- }
-
- if (share_irqs)
- irqflag = IRQF_SHARED;
-
- for (i = 0, up = serial8250_ports;
- i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
- i++, up++) {
- struct uart_port *port = &up->port;
-
- port->iobase = old_serial_port[i].port;
- port->irq = irq_canonicalize(old_serial_port[i].irq);
- port->irqflags = old_serial_port[i].irqflags;
- port->uartclk = old_serial_port[i].baud_base * 16;
- port->flags = old_serial_port[i].flags;
- port->hub6 = old_serial_port[i].hub6;
- port->membase = old_serial_port[i].iomem_base;
- port->iotype = old_serial_port[i].io_type;
- port->regshift = old_serial_port[i].iomem_reg_shift;
- set_io_from_upio(port);
- port->irqflags |= irqflag;
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(i, &up->port, &up->capabilities);
-
- }
-}
-
-static void
-serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
-{
- up->port.type = type;
- if (!up->port.fifosize)
- up->port.fifosize = uart_config[type].fifo_size;
- if (!up->tx_loadsz)
- up->tx_loadsz = uart_config[type].tx_loadsz;
- if (!up->capabilities)
- up->capabilities = uart_config[type].flags;
-}
-
-static void __init
-serial8250_register_ports(struct uart_driver *drv, struct device *dev)
-{
- int i;
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.dev)
- continue;
-
- up->port.dev = dev;
-
- if (up->port.flags & UPF_FIXED_TYPE)
- serial8250_init_fixed_type_port(up, up->port.type);
-
- uart_add_one_port(drv, &up->port);
- }
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-
-static void serial8250_console_putchar(struct uart_port *port, int ch)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- wait_for_xmitr(up, UART_LSR_THRE);
- serial_port_out(port, UART_TX, ch);
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void
-serial8250_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct uart_8250_port *up = &serial8250_ports[co->index];
- struct uart_port *port = &up->port;
- unsigned long flags;
- unsigned int ier;
- int locked = 1;
-
- touch_nmi_watchdog();
-
- local_irq_save(flags);
- if (port->sysrq) {
- /* serial8250_handle_irq() already took the lock */
- locked = 0;
- } else if (oops_in_progress) {
- locked = spin_trylock(&port->lock);
- } else
- spin_lock(&port->lock);
-
- /*
- * First save the IER then disable the interrupts
- */
- ier = serial_port_in(port, UART_IER);
-
- if (up->capabilities & UART_CAP_UUE)
- serial_port_out(port, UART_IER, UART_IER_UUE);
- else
- serial_port_out(port, UART_IER, 0);
-
- uart_console_write(port, s, count, serial8250_console_putchar);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_port_out(port, UART_IER, ier);
-
- /*
- * The receive handling will happen properly because the
- * receive ready bit will still be set; it is not cleared
- * on read. However, modem control will not, we must
- * call it if we have saved something in the saved flags
- * while processing with interrupts off.
- */
- if (up->msr_saved_flags)
- serial8250_modem_status(up);
-
- if (locked)
- spin_unlock(&port->lock);
- local_irq_restore(flags);
-}
-
-static int __init serial8250_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= nr_uarts)
- co->index = 0;
- port = &serial8250_ports[co->index].port;
- if (!port->iobase && !port->membase)
- return -ENODEV;
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static int serial8250_console_early_setup(void)
-{
- return serial8250_find_port_for_earlycon();
-}
-
-static struct console serial8250_console = {
- .name = "ttyS",
- .write = serial8250_console_write,
- .device = uart_console_device,
- .setup = serial8250_console_setup,
- .early_setup = serial8250_console_early_setup,
- .flags = CON_PRINTBUFFER | CON_ANYTIME,
- .index = -1,
- .data = &serial8250_reg,
-};
-
-static int __init serial8250_console_init(void)
-{
- serial8250_isa_init_ports();
- register_console(&serial8250_console);
- return 0;
-}
-console_initcall(serial8250_console_init);
-
-int serial8250_find_port(struct uart_port *p)
-{
- int line;
- struct uart_port *port;
-
- for (line = 0; line < nr_uarts; line++) {
- port = &serial8250_ports[line].port;
- if (uart_match_port(p, port))
- return line;
- }
- return -ENODEV;
-}
-
-#define SERIAL8250_CONSOLE &serial8250_console
-#else
-#define SERIAL8250_CONSOLE NULL
-#endif
-
-static struct uart_driver serial8250_reg = {
- .owner = THIS_MODULE,
- .driver_name = "serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .cons = SERIAL8250_CONSOLE,
-};
-
-/*
- * early_serial_setup - early registration for 8250 ports
- *
- * Setup an 8250 port structure prior to console initialisation. Use
- * after console initialisation will cause undefined behaviour.
- */
-int __init early_serial_setup(struct uart_port *port)
-{
- struct uart_port *p;
-
- if (port->line >= ARRAY_SIZE(serial8250_ports))
- return -ENODEV;
-
- serial8250_isa_init_ports();
- p = &serial8250_ports[port->line].port;
- p->iobase = port->iobase;
- p->membase = port->membase;
- p->irq = port->irq;
- p->irqflags = port->irqflags;
- p->uartclk = port->uartclk;
- p->fifosize = port->fifosize;
- p->regshift = port->regshift;
- p->iotype = port->iotype;
- p->flags = port->flags;
- p->mapbase = port->mapbase;
- p->private_data = port->private_data;
- p->type = port->type;
- p->line = port->line;
-
- set_io_from_upio(p);
- if (port->serial_in)
- p->serial_in = port->serial_in;
- if (port->serial_out)
- p->serial_out = port->serial_out;
- if (port->handle_irq)
- p->handle_irq = port->handle_irq;
- else
- p->handle_irq = serial8250_default_handle_irq;
-
- return 0;
-}
-
-/**
- * serial8250_suspend_port - suspend one serial port
- * @line: serial line number
- *
- * Suspend one serial port.
- */
-void serial8250_suspend_port(int line)
-{
- uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
-}
-
-/**
- * serial8250_resume_port - resume one serial port
- * @line: serial line number
- *
- * Resume one serial port.
- */
-void serial8250_resume_port(int line)
-{
- struct uart_8250_port *up = &serial8250_ports[line];
- struct uart_port *port = &up->port;
-
- if (up->capabilities & UART_NATSEMI) {
- /* Ensure it's still in high speed mode */
- serial_port_out(port, UART_LCR, 0xE0);
-
- ns16550a_goto_highspeed(up);
-
- serial_port_out(port, UART_LCR, 0);
- port->uartclk = 921600*16;
- }
- uart_resume_port(&serial8250_reg, port);
-}
-
-/*
- * Register a set of serial devices attached to a platform device. The
- * list is terminated with a zero flags entry, which means we expect
- * all entries to have at least UPF_BOOT_AUTOCONF set.
- */
-static int serial8250_probe(struct platform_device *dev)
-{
- struct plat_serial8250_port *p = dev->dev.platform_data;
- struct uart_8250_port uart;
- int ret, i, irqflag = 0;
-
- memset(&uart, 0, sizeof(uart));
-
- if (share_irqs)
- irqflag = IRQF_SHARED;
-
- for (i = 0; p && p->flags != 0; p++, i++) {
- uart.port.iobase = p->iobase;
- uart.port.membase = p->membase;
- uart.port.irq = p->irq;
- uart.port.irqflags = p->irqflags;
- uart.port.uartclk = p->uartclk;
- uart.port.regshift = p->regshift;
- uart.port.iotype = p->iotype;
- uart.port.flags = p->flags;
- uart.port.mapbase = p->mapbase;
- uart.port.hub6 = p->hub6;
- uart.port.private_data = p->private_data;
- uart.port.type = p->type;
- uart.port.serial_in = p->serial_in;
- uart.port.serial_out = p->serial_out;
- uart.port.handle_irq = p->handle_irq;
- uart.port.handle_break = p->handle_break;
- uart.port.set_termios = p->set_termios;
- uart.port.pm = p->pm;
- uart.port.dev = &dev->dev;
- uart.port.irqflags |= irqflag;
- ret = serial8250_register_8250_port(&uart);
- if (ret < 0) {
- dev_err(&dev->dev, "unable to register port at index %d "
- "(IO%lx MEM%llx IRQ%d): %d\n", i,
- p->iobase, (unsigned long long)p->mapbase,
- p->irq, ret);
- }
- }
- return 0;
-}
-
-/*
- * Remove serial ports registered against a platform device.
- */
-static int serial8250_remove(struct platform_device *dev)
-{
- int i;
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.dev == &dev->dev)
- serial8250_unregister_port(i);
- }
- return 0;
-}
-
-static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- uart_suspend_port(&serial8250_reg, &up->port);
- }
-
- return 0;
-}
-
-static int serial8250_resume(struct platform_device *dev)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- serial8250_resume_port(i);
- }
-
- return 0;
-}
-
-static struct platform_driver serial8250_isa_driver = {
- .probe = serial8250_probe,
- .remove = serial8250_remove,
- .suspend = serial8250_suspend,
- .resume = serial8250_resume,
- .driver = {
- .name = "serial8250",
- .owner = THIS_MODULE,
- },
-};
-
-/*
- * This "device" covers _all_ ISA 8250-compatible serial devices listed
- * in the table in include/asm/serial.h
- */
-static struct platform_device *serial8250_isa_devs;
-
-/*
- * serial8250_register_8250_port and serial8250_unregister_port allows for
- * 16x50 serial ports to be configured at run-time, to support PCMCIA
- * modems and PCI multiport cards.
- */
-static DEFINE_MUTEX(serial_mutex);
-
-static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
-{
- int i;
-
- /*
- * First, find a port entry which matches.
- */
- for (i = 0; i < nr_uarts; i++)
- if (uart_match_port(&serial8250_ports[i].port, port))
- return &serial8250_ports[i];
-
- /*
- * We didn't find a matching entry, so look for the first
- * free entry. We look for one which hasn't been previously
- * used (indicated by zero iobase).
- */
- for (i = 0; i < nr_uarts; i++)
- if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
- serial8250_ports[i].port.iobase == 0)
- return &serial8250_ports[i];
-
- /*
- * That also failed. Last resort is to find any entry which
- * doesn't have a real port associated with it.
- */
- for (i = 0; i < nr_uarts; i++)
- if (serial8250_ports[i].port.type == PORT_UNKNOWN)
- return &serial8250_ports[i];
-
- return NULL;
-}
-
-/**
- * serial8250_register_8250_port - register a serial port
- * @up: serial port template
- *
- * Configure the serial port specified by the request. If the
- * port exists and is in use, it is hung up and unregistered
- * first.
- *
- * The port is then probed and if necessary the IRQ is autodetected
- * If this fails an error is returned.
- *
- * On success the port is ready to use and the line number is returned.
- */
-int serial8250_register_8250_port(struct uart_8250_port *up)
-{
- struct uart_8250_port *uart;
- int ret = -ENOSPC;
-
- if (up->port.uartclk == 0)
- return -EINVAL;
-
- mutex_lock(&serial_mutex);
-
- uart = serial8250_find_match_or_unused(&up->port);
- if (uart && uart->port.type != PORT_8250_CIR) {
- if (uart->port.dev)
- uart_remove_one_port(&serial8250_reg, &uart->port);
-
- uart->port.iobase = up->port.iobase;
- uart->port.membase = up->port.membase;
- uart->port.irq = up->port.irq;
- uart->port.irqflags = up->port.irqflags;
- uart->port.uartclk = up->port.uartclk;
- uart->port.fifosize = up->port.fifosize;
- uart->port.regshift = up->port.regshift;
- uart->port.iotype = up->port.iotype;
- uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
- uart->bugs = up->bugs;
- uart->port.mapbase = up->port.mapbase;
- uart->port.private_data = up->port.private_data;
- uart->port.fifosize = up->port.fifosize;
- uart->tx_loadsz = up->tx_loadsz;
- uart->capabilities = up->capabilities;
-
- if (up->port.dev)
- uart->port.dev = up->port.dev;
-
- if (up->port.flags & UPF_FIXED_TYPE)
- serial8250_init_fixed_type_port(uart, up->port.type);
-
- set_io_from_upio(&uart->port);
- /* Possibly override default I/O functions. */
- if (up->port.serial_in)
- uart->port.serial_in = up->port.serial_in;
- if (up->port.serial_out)
- uart->port.serial_out = up->port.serial_out;
- if (up->port.handle_irq)
- uart->port.handle_irq = up->port.handle_irq;
- /* Possibly override set_termios call */
- if (up->port.set_termios)
- uart->port.set_termios = up->port.set_termios;
- if (up->port.pm)
- uart->port.pm = up->port.pm;
- if (up->port.handle_break)
- uart->port.handle_break = up->port.handle_break;
- if (up->dl_read)
- uart->dl_read = up->dl_read;
- if (up->dl_write)
- uart->dl_write = up->dl_write;
- if (up->dma)
- uart->dma = up->dma;
-
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
-
- ret = uart_add_one_port(&serial8250_reg, &uart->port);
- if (ret == 0)
- ret = uart->port.line;
- }
- mutex_unlock(&serial_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(serial8250_register_8250_port);
-
-/**
- * serial8250_unregister_port - remove a 16x50 serial port at runtime
- * @line: serial line number
- *
- * Remove one serial port. This may not be called from interrupt
- * context. We hand the port back to the our control.
- */
-void serial8250_unregister_port(int line)
-{
- struct uart_8250_port *uart = &serial8250_ports[line];
-
- mutex_lock(&serial_mutex);
- uart_remove_one_port(&serial8250_reg, &uart->port);
- if (serial8250_isa_devs) {
- uart->port.flags &= ~UPF_BOOT_AUTOCONF;
- uart->port.type = PORT_UNKNOWN;
- uart->port.dev = &serial8250_isa_devs->dev;
- uart->capabilities = uart_config[uart->port.type].flags;
- uart_add_one_port(&serial8250_reg, &uart->port);
- } else {
- uart->port.dev = NULL;
- }
- mutex_unlock(&serial_mutex);
-}
-EXPORT_SYMBOL(serial8250_unregister_port);
-
-static int __init serial8250_init(void)
-{
- int ret;
-
- serial8250_isa_init_ports();
-
- printk(KERN_INFO "Serial: 8250/16550 driver, "
- "%d ports, IRQ sharing %sabled\n", nr_uarts,
- share_irqs ? "en" : "dis");
-
-#ifdef CONFIG_SPARC
- ret = sunserial_register_minors(&serial8250_reg, UART_NR);
-#else
- serial8250_reg.nr = UART_NR;
- ret = uart_register_driver(&serial8250_reg);
-#endif
- if (ret)
- goto out;
-
- ret = serial8250_pnp_init();
- if (ret)
- goto unreg_uart_drv;
-
- serial8250_isa_devs = platform_device_alloc("serial8250",
- PLAT8250_DEV_LEGACY);
- if (!serial8250_isa_devs) {
- ret = -ENOMEM;
- goto unreg_pnp;
- }
-
- ret = platform_device_add(serial8250_isa_devs);
- if (ret)
- goto put_dev;
-
- serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
-
- ret = platform_driver_register(&serial8250_isa_driver);
- if (ret == 0)
- goto out;
-
- platform_device_del(serial8250_isa_devs);
-put_dev:
- platform_device_put(serial8250_isa_devs);
-unreg_pnp:
- serial8250_pnp_exit();
-unreg_uart_drv:
-#ifdef CONFIG_SPARC
- sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
- uart_unregister_driver(&serial8250_reg);
-#endif
-out:
- return ret;
-}
-
-static void __exit serial8250_exit(void)
-{
- struct platform_device *isa_dev = serial8250_isa_devs;
-
- /*
- * This tells serial8250_unregister_port() not to re-register
- * the ports (thereby making serial8250_isa_driver permanently
- * in use.)
- */
- serial8250_isa_devs = NULL;
-
- platform_driver_unregister(&serial8250_isa_driver);
- platform_device_unregister(isa_dev);
-
- serial8250_pnp_exit();
-
-#ifdef CONFIG_SPARC
- sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
- uart_unregister_driver(&serial8250_reg);
-#endif
-}
-
-module_init(serial8250_init);
-module_exit(serial8250_exit);
-
-EXPORT_SYMBOL(serial8250_suspend_port);
-EXPORT_SYMBOL(serial8250_resume_port);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
-
-module_param(share_irqs, uint, 0644);
-MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
- " (unsafe)");
-
-module_param(nr_uarts, uint, 0644);
-MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
-
-module_param(skip_txen_test, uint, 0644);
-MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
-
-#ifdef CONFIG_SERIAL_8250_RSA
-module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
-MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
-#endif
-MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
--- /dev/null
+/*
+ * Driver for 8250/16550-type serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port.
+ * membase is an 'ioremapped' cookie.
+ */
+
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/ratelimit.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/nmi.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#ifdef CONFIG_SPARC
+#include <linux/sunserialcore.h>
+#endif
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "8250.h"
+
+/*
+ * Configuration:
+ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
+ * is unsafe when used on edge-triggered interrupts.
+ */
+static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+
+static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+
+static struct uart_driver serial8250_reg;
+
+static int serial_index(struct uart_port *port)
+{
+ return (serial8250_reg.minor - 64) + port->line;
+}
+
+static unsigned int skip_txen_test; /* force skip of txen test at init time */
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 512
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
+#define CONFIG_SERIAL_DETECT_IRQ 1
+#endif
+#ifdef CONFIG_SERIAL_8250_MANY_PORTS
+#define CONFIG_SERIAL_MANY_PORTS 1
+#endif
+
+/*
+ * HUB6 is always on. This will be removed once the header
+ * files have been cleaned.
+ */
+#define CONFIG_HUB6 1
+
+#include <asm/serial.h>
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static const struct old_serial_port old_serial_port[] = {
+ SERIAL_PORT_DFNS /* defined in asm/serial.h */
+};
+
+#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
+
+#ifdef CONFIG_SERIAL_8250_RSA
+
+#define PORT_RSA_MAX 4
+static unsigned long probe_rsa[PORT_RSA_MAX];
+static unsigned int probe_rsa_count;
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+struct irq_info {
+ struct hlist_node node;
+ int irq;
+ spinlock_t lock; /* Protects list not the hash */
+ struct list_head *head;
+};
+
+#define NR_IRQ_HASH 32 /* Can be adjusted later */
+static struct hlist_head irq_lists[NR_IRQ_HASH];
+static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial8250_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_8250] = {
+ .name = "8250",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16450] = {
+ .name = "16450",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550] = {
+ .name = "16550",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550A] = {
+ .name = "16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_CIRRUS] = {
+ .name = "Cirrus",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16650] = {
+ .name = "ST16650",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16650V2] = {
+ .name = "ST16650V2",
+ .fifo_size = 32,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16750] = {
+ .name = "TI16750",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR7_64BYTE,
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
+ },
+ [PORT_STARTECH] = {
+ .name = "Startech",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16C950] = {
+ .name = "16C950/954",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ /* UART_CAP_EFR breaks billionon CF bluetooth card. */
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
+ },
+ [PORT_16654] = {
+ .name = "ST16654",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16850] = {
+ .name = "XR16850",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_RSA] = {
+ .name = "RSA",
+ .fifo_size = 2048,
+ .tx_loadsz = 2048,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_NS16550A] = {
+ .name = "NS16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_NATSEMI,
+ },
+ [PORT_XSCALE] = {
+ .name = "XScale",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
+ },
+ [PORT_OCTEON] = {
+ .name = "OCTEON",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_AR7] = {
+ .name = "AR7",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_U6_16550A] = {
+ .name = "U6_16550A",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_TEGRA] = {
+ .name = "Tegra",
+ .fifo_size = 32,
+ .tx_loadsz = 8,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_01,
+ .flags = UART_CAP_FIFO | UART_CAP_RTOIE,
+ },
+ [PORT_XR17D15X] = {
+ .name = "XR17D15X",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP,
+ },
+ [PORT_XR17V35X] = {
+ .name = "XR17V35X",
+ .fifo_size = 256,
+ .tx_loadsz = 256,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 |
+ UART_FCR_T_TRIG_11,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP,
+ },
+ [PORT_LPC3220] = {
+ .name = "LPC3220",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
+ UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_BRCM_TRUMANAGE] = {
+ .name = "TruManage",
+ .fifo_size = 1,
+ .tx_loadsz = 1024,
+ .flags = UART_CAP_HFIFO,
+ },
+ [PORT_8250_CIR] = {
+ .name = "CIR port"
+ },
+ [PORT_ALTR_16550_F32] = {
+ .name = "Altera 16550 FIFO32",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F64] = {
+ .name = "Altera 16550 FIFO64",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F128] = {
+ .name = "Altera 16550 FIFO128",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+};
+
+/* Uart divisor latch read */
+static int default_serial_dl_read(struct uart_8250_port *up)
+{
+ return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static void default_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ serial_out(up, UART_DLL, value & 0xff);
+ serial_out(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+
+/* Au1x00/RT288x UART hardware has a weird register layout */
+static const u8 au_io_in_map[] = {
+ [UART_RX] = 0,
+ [UART_IER] = 2,
+ [UART_IIR] = 3,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+ [UART_LSR] = 7,
+ [UART_MSR] = 8,
+};
+
+static const u8 au_io_out_map[] = {
+ [UART_TX] = 1,
+ [UART_IER] = 2,
+ [UART_FCR] = 4,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+};
+
+static unsigned int au_serial_in(struct uart_port *p, int offset)
+{
+ offset = au_io_in_map[offset] << p->regshift;
+ return __raw_readl(p->membase + offset);
+}
+
+static void au_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = au_io_out_map[offset] << p->regshift;
+ __raw_writel(value, p->membase + offset);
+}
+
+/* Au1x00 haven't got a standard divisor latch */
+static int au_serial_dl_read(struct uart_8250_port *up)
+{
+ return __raw_readl(up->port.membase + 0x28);
+}
+
+static void au_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ __raw_writel(value, up->port.membase + 0x28);
+}
+
+#endif
+
+static unsigned int hub6_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ return inb(p->iobase + 1);
+}
+
+static void hub6_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ outb(value, p->iobase + 1);
+}
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return readb(p->membase + offset);
+}
+
+static void mem_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static void mem32_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static unsigned int mem32_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return readl(p->membase + offset);
+}
+
+static unsigned int io_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return inb(p->iobase + offset);
+}
+
+static void io_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ outb(value, p->iobase + offset);
+}
+
+static int serial8250_default_handle_irq(struct uart_port *port);
+static int exar_handle_irq(struct uart_port *port);
+
+static void set_io_from_upio(struct uart_port *p)
+{
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
+
+ up->dl_read = default_serial_dl_read;
+ up->dl_write = default_serial_dl_write;
+
+ switch (p->iotype) {
+ case UPIO_HUB6:
+ p->serial_in = hub6_serial_in;
+ p->serial_out = hub6_serial_out;
+ break;
+
+ case UPIO_MEM:
+ p->serial_in = mem_serial_in;
+ p->serial_out = mem_serial_out;
+ break;
+
+ case UPIO_MEM32:
+ p->serial_in = mem32_serial_in;
+ p->serial_out = mem32_serial_out;
+ break;
+
+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+ case UPIO_AU:
+ p->serial_in = au_serial_in;
+ p->serial_out = au_serial_out;
+ up->dl_read = au_serial_dl_read;
+ up->dl_write = au_serial_dl_write;
+ break;
+#endif
+
+ default:
+ p->serial_in = io_serial_in;
+ p->serial_out = io_serial_out;
+ break;
+ }
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
+ p->handle_irq = serial8250_default_handle_irq;
+}
+
+static void
+serial_port_out_sync(struct uart_port *p, int offset, int value)
+{
+ switch (p->iotype) {
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_AU:
+ p->serial_out(p, offset, value);
+ p->serial_in(p, UART_LCR); /* safe, no side-effects */
+ break;
+ default:
+ p->serial_out(p, offset, value);
+ }
+}
+
+/*
+ * For the 16C950
+ */
+static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
+{
+ serial_out(up, UART_SCR, offset);
+ serial_out(up, UART_ICR, value);
+}
+
+static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
+{
+ unsigned int value;
+
+ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
+ serial_out(up, UART_SCR, offset);
+ value = serial_in(up, UART_ICR);
+ serial_icr_write(up, UART_ACR, up->acr);
+
+ return value;
+}
+
+/*
+ * FIFO support.
+ */
+static void serial8250_clear_fifos(struct uart_8250_port *p)
+{
+ if (p->capabilities & UART_CAP_FIFO) {
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(p, UART_FCR, 0);
+ }
+}
+
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
+{
+ unsigned char fcr;
+
+ serial8250_clear_fifos(p);
+ fcr = uart_config[p->port.type].fcr;
+ serial_out(p, UART_FCR, fcr);
+}
+EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
+
+/*
+ * IER sleep support. UARTs which have EFRs need the "extended
+ * capability" bit enabled. Note that on XR16C850s, we need to
+ * reset LCR to write to IER.
+ */
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+{
+ /*
+ * Exar UARTs have a SLEEP register that enables or disables
+ * each UART to enter sleep mode separately. On the XR17V35x the
+ * register is accessible to each UART at the UART_EXAR_SLEEP
+ * offset but the UART channel may only write to the corresponding
+ * bit.
+ */
+ if ((p->port.type == PORT_XR17V35X) ||
+ (p->port.type == PORT_XR17D15X)) {
+ serial_out(p, UART_EXAR_SLEEP, 0xff);
+ return;
+ }
+
+ if (p->capabilities & UART_CAP_SLEEP) {
+ if (p->capabilities & UART_CAP_EFR) {
+ serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(p, UART_EFR, UART_EFR_ECB);
+ serial_out(p, UART_LCR, 0);
+ }
+ serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
+ if (p->capabilities & UART_CAP_EFR) {
+ serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(p, UART_EFR, 0);
+ serial_out(p, UART_LCR, 0);
+ }
+ }
+}
+
+#ifdef CONFIG_SERIAL_8250_RSA
+/*
+ * Attempts to turn on the RSA FIFO. Returns zero on failure.
+ * We set the port uart clock rate if we succeed.
+ */
+static int __enable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ mode = serial_in(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+
+ if (!result) {
+ serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
+ mode = serial_in(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
+
+ return result;
+}
+
+static void enable_rsa(struct uart_8250_port *up)
+{
+ if (up->port.type == PORT_RSA) {
+ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+ __enable_rsa(up);
+ spin_unlock_irq(&up->port.lock);
+ }
+ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
+ serial_out(up, UART_RSA_FRR, 0);
+ }
+}
+
+/*
+ * Attempts to turn off the RSA FIFO. Returns zero on failure.
+ * It is unknown why interrupts were disabled in here. However,
+ * the caller is expected to preserve this behaviour by grabbing
+ * the spinlock before calling this function.
+ */
+static void disable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ if (up->port.type == PORT_RSA &&
+ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+
+ mode = serial_in(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+
+ if (!result) {
+ serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
+ mode = serial_in(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
+ spin_unlock_irq(&up->port.lock);
+ }
+}
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+/*
+ * This is a quickie test to see how big the FIFO is.
+ * It doesn't work at all the time, more's the pity.
+ */
+static int size_fifo(struct uart_8250_port *up)
+{
+ unsigned char old_fcr, old_mcr, old_lcr;
+ unsigned short old_dl;
+ int count;
+
+ old_lcr = serial_in(up, UART_LCR);
+ serial_out(up, UART_LCR, 0);
+ old_fcr = serial_in(up, UART_FCR);
+ old_mcr = serial_in(up, UART_MCR);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_MCR, UART_MCR_LOOP);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ old_dl = serial_dl_read(up);
+ serial_dl_write(up, 0x0001);
+ serial_out(up, UART_LCR, 0x03);
+ for (count = 0; count < 256; count++)
+ serial_out(up, UART_TX, count);
+ mdelay(20);/* FIXME - schedule_timeout */
+ for (count = 0; (serial_in(up, UART_LSR) & UART_LSR_DR) &&
+ (count < 256); count++)
+ serial_in(up, UART_RX);
+ serial_out(up, UART_FCR, old_fcr);
+ serial_out(up, UART_MCR, old_mcr);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ serial_dl_write(up, old_dl);
+ serial_out(up, UART_LCR, old_lcr);
+
+ return count;
+}
+
+/*
+ * Read UART ID using the divisor method - set DLL and DLM to zero
+ * and the revision will be in DLL and device type in DLM. We
+ * preserve the device state across this.
+ */
+static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
+{
+ unsigned char old_dll, old_dlm, old_lcr;
+ unsigned int id;
+
+ old_lcr = serial_in(p, UART_LCR);
+ serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
+
+ old_dll = serial_in(p, UART_DLL);
+ old_dlm = serial_in(p, UART_DLM);
+
+ serial_out(p, UART_DLL, 0);
+ serial_out(p, UART_DLM, 0);
+
+ id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
+
+ serial_out(p, UART_DLL, old_dll);
+ serial_out(p, UART_DLM, old_dlm);
+ serial_out(p, UART_LCR, old_lcr);
+
+ return id;
+}
+
+/*
+ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
+ * When this function is called we know it is at least a StarTech
+ * 16650 V2, but it might be one of several StarTech UARTs, or one of
+ * its clones. (We treat the broken original StarTech 16650 V1 as a
+ * 16550, and why not? Startech doesn't seem to even acknowledge its
+ * existence.)
+ *
+ * What evil have men's minds wrought...
+ */
+static void autoconfig_has_efr(struct uart_8250_port *up)
+{
+ unsigned int id1, id2, id3, rev;
+
+ /*
+ * Everything with an EFR has SLEEP
+ */
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+
+ /*
+ * First we check to see if it's an Oxford Semiconductor UART.
+ *
+ * If we have to do this here because some non-National
+ * Semiconductor clone chips lock up if you try writing to the
+ * LSR register (which serial_icr_read does)
+ */
+
+ /*
+ * Check for Oxford Semiconductor 16C950.
+ *
+ * EFR [4] must be set else this test fails.
+ *
+ * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
+ * claims that it's needed for 952 dual UART's (which are not
+ * recommended for new designs).
+ */
+ up->acr = 0;
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0x00);
+ id1 = serial_icr_read(up, UART_ID1);
+ id2 = serial_icr_read(up, UART_ID2);
+ id3 = serial_icr_read(up, UART_ID3);
+ rev = serial_icr_read(up, UART_REV);
+
+ DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
+
+ if (id1 == 0x16 && id2 == 0xC9 &&
+ (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
+ up->port.type = PORT_16C950;
+
+ /*
+ * Enable work around for the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+ * when DLL is 0.
+ */
+ if (id3 == 0x52 && rev == 0x01)
+ up->bugs |= UART_BUG_QUOT;
+ return;
+ }
+
+ /*
+ * We check for a XR16C850 by setting DLL and DLM to 0, and then
+ * reading back DLL and DLM. The chip type depends on the DLM
+ * value read back:
+ * 0x10 - XR16C850 and the DLL contains the chip revision.
+ * 0x12 - XR16C2850.
+ * 0x14 - XR16C854.
+ */
+ id1 = autoconfig_read_divisor_id(up);
+ DEBUG_AUTOCONF("850id=%04x ", id1);
+
+ id2 = id1 >> 8;
+ if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
+ up->port.type = PORT_16850;
+ return;
+ }
+
+ /*
+ * It wasn't an XR16C850.
+ *
+ * We distinguish between the '654 and the '650 by counting
+ * how many bytes are in the FIFO. I'm using this for now,
+ * since that's the technique that was sent to me in the
+ * serial driver update, but I'm not convinced this works.
+ * I've had problems doing this in the past. -TYT
+ */
+ if (size_fifo(up) == 64)
+ up->port.type = PORT_16654;
+ else
+ up->port.type = PORT_16650V2;
+}
+
+/*
+ * We detected a chip without a FIFO. Only two fall into
+ * this category - the original 8250 and the 16450. The
+ * 16450 has a scratch register (accessible with LCR=0)
+ */
+static void autoconfig_8250(struct uart_8250_port *up)
+{
+ unsigned char scratch, status1, status2;
+
+ up->port.type = PORT_8250;
+
+ scratch = serial_in(up, UART_SCR);
+ serial_out(up, UART_SCR, 0xa5);
+ status1 = serial_in(up, UART_SCR);
+ serial_out(up, UART_SCR, 0x5a);
+ status2 = serial_in(up, UART_SCR);
+ serial_out(up, UART_SCR, scratch);
+
+ if (status1 == 0xa5 && status2 == 0x5a)
+ up->port.type = PORT_16450;
+}
+
+static int broken_efr(struct uart_8250_port *up)
+{
+ /*
+ * Exar ST16C2550 "A2" devices incorrectly detect as
+ * having an EFR, and report an ID of 0x0201. See
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
+ */
+ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
+ return 1;
+
+ return 0;
+}
+
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+ unsigned char status;
+
+ status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+ if (PRESL(status) == 0x10) {
+ /* already in high speed mode */
+ return 0;
+ } else {
+ status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+ status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
+ serial_out(up, 0x04, status);
+ }
+ return 1;
+}
+
+/*
+ * We know that the chip has FIFOs. Does it have an EFR? The
+ * EFR is located in the same register position as the IIR and
+ * we know the top two bits of the IIR are currently set. The
+ * EFR should contain zero. Try to read the EFR.
+ */
+static void autoconfig_16550a(struct uart_8250_port *up)
+{
+ unsigned char status1, status2;
+ unsigned int iersave;
+
+ up->port.type = PORT_16550A;
+ up->capabilities |= UART_CAP_FIFO;
+
+ /*
+ * XR17V35x UARTs have an extra divisor register, DLD
+ * that gets enabled with when DLAB is set which will
+ * cause the device to incorrectly match and assign
+ * port type to PORT_16650. The EFR for this UART is
+ * found at offset 0x09. Instead check the Deice ID (DVID)
+ * register for a 2, 4 or 8 port UART.
+ */
+ if (up->port.flags & UPF_EXAR_EFR) {
+ status1 = serial_in(up, UART_EXAR_DVID);
+ if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) {
+ DEBUG_AUTOCONF("Exar XR17V35x ");
+ up->port.type = PORT_XR17V35X;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP;
+
+ return;
+ }
+
+ }
+
+ /*
+ * Check for presence of the EFR when DLAB is set.
+ * Only ST16C650V1 UARTs pass this test.
+ */
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ if (serial_in(up, UART_EFR) == 0) {
+ serial_out(up, UART_EFR, 0xA8);
+ if (serial_in(up, UART_EFR) != 0) {
+ DEBUG_AUTOCONF("EFRv1 ");
+ up->port.type = PORT_16650;
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+ } else {
+ DEBUG_AUTOCONF("Motorola 8xxx DUART ");
+ }
+ serial_out(up, UART_EFR, 0);
+ return;
+ }
+
+ /*
+ * Maybe it requires 0xbf to be written to the LCR.
+ * (other ST16C650V2 UARTs, TI16C752A, etc)
+ */
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
+ DEBUG_AUTOCONF("EFRv2 ");
+ autoconfig_has_efr(up);
+ return;
+ }
+
+ /*
+ * Check for a National Semiconductor SuperIO chip.
+ * Attempt to switch to bank 2, read the value of the LOOP bit
+ * from EXCR1. Switch back to bank 0, change it in MCR. Then
+ * switch back to bank 2, read it from EXCR1 again and check
+ * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
+ */
+ serial_out(up, UART_LCR, 0);
+ status1 = serial_in(up, UART_MCR);
+ serial_out(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+
+ if (!((status2 ^ status1) & UART_MCR_LOOP)) {
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP);
+ serial_out(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_MCR, status1);
+
+ if ((status2 ^ status1) & UART_MCR_LOOP) {
+ unsigned short quot;
+
+ serial_out(up, UART_LCR, 0xE0);
+
+ quot = serial_dl_read(up);
+ quot <<= 3;
+
+ if (ns16550a_goto_highspeed(up))
+ serial_dl_write(up, quot);
+
+ serial_out(up, UART_LCR, 0);
+
+ up->port.uartclk = 921600*16;
+ up->port.type = PORT_NS16550A;
+ up->capabilities |= UART_NATSEMI;
+ return;
+ }
+ }
+
+ /*
+ * No EFR. Try to detect a TI16750, which only sets bit 5 of
+ * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
+ * Try setting it with and without DLAB set. Cheap clones
+ * set bit 5 without DLAB set.
+ */
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status1 = serial_in(up, UART_IIR) >> 5;
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status2 = serial_in(up, UART_IIR) >> 5;
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_LCR, 0);
+
+ DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
+
+ if (status1 == 6 && status2 == 7) {
+ up->port.type = PORT_16750;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
+ return;
+ }
+
+ /*
+ * Try writing and reading the UART_IER_UUE bit (b6).
+ * If it works, this is probably one of the Xscale platform's
+ * internal UARTs.
+ * We're going to explicitly set the UUE bit to 0 before
+ * trying to write and read a 1 just to make sure it's not
+ * already a 1 and maybe locked there before we even start start.
+ */
+ iersave = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, iersave & ~UART_IER_UUE);
+ if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
+ /*
+ * OK it's in a known zero state, try writing and reading
+ * without disturbing the current state of the other bits.
+ */
+ serial_out(up, UART_IER, iersave | UART_IER_UUE);
+ if (serial_in(up, UART_IER) & UART_IER_UUE) {
+ /*
+ * It's an Xscale.
+ * We'll leave the UART_IER_UUE bit set to 1 (enabled).
+ */
+ DEBUG_AUTOCONF("Xscale ");
+ up->port.type = PORT_XSCALE;
+ up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
+ return;
+ }
+ } else {
+ /*
+ * If we got here we couldn't force the IER_UUE bit to 0.
+ * Log it and continue.
+ */
+ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
+ }
+ serial_out(up, UART_IER, iersave);
+
+ /*
+ * Exar uarts have EFR in a weird location
+ */
+ if (up->port.flags & UPF_EXAR_EFR) {
+ DEBUG_AUTOCONF("Exar XR17D15x ");
+ up->port.type = PORT_XR17D15X;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP;
+
+ return;
+ }
+
+ /*
+ * We distinguish between 16550A and U6 16550A by counting
+ * how many bytes are in the FIFO.
+ */
+ if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+ up->port.type = PORT_U6_16550A;
+ up->capabilities |= UART_CAP_AFE;
+ }
+}
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port. It determines what type of UART chip this serial port is
+ * using: 8250, 16450, 16550, 16550A. The important question is
+ * whether or not this UART is a 16550A or not, since this will
+ * determine whether or not we can use its FIFO features or not.
+ */
+static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
+{
+ unsigned char status1, scratch, scratch2, scratch3;
+ unsigned char save_lcr, save_mcr;
+ struct uart_port *port = &up->port;
+ unsigned long flags;
+ unsigned int old_capabilities;
+
+ if (!port->iobase && !port->mapbase && !port->membase)
+ return;
+
+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
+ serial_index(port), port->iobase, port->membase);
+
+ /*
+ * We really do need global IRQs disabled here - we're going to
+ * be frobbing the chips IRQ enable register to see if it exists.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+
+ up->capabilities = 0;
+ up->bugs = 0;
+
+ if (!(port->flags & UPF_BUGGY_UART)) {
+ /*
+ * Do a simple existence test first; if we fail this,
+ * there's no point trying anything else.
+ *
+ * 0x80 is used as a nonsense port to prevent against
+ * false positives due to ISA bus float. The
+ * assumption is that 0x80 is a non-existent port;
+ * which should be safe since include/asm/io.h also
+ * makes this assumption.
+ *
+ * Note: this is safe as long as MCR bit 4 is clear
+ * and the device is in "PC" mode.
+ */
+ scratch = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ /*
+ * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
+ * 16C754B) allow only to modify them if an EFR bit is set.
+ */
+ scratch2 = serial_in(up, UART_IER) & 0x0f;
+ serial_out(up, UART_IER, 0x0F);
+#ifdef __i386__
+ outb(0, 0x080);
+#endif
+ scratch3 = serial_in(up, UART_IER) & 0x0f;
+ serial_out(up, UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0F) {
+ /*
+ * We failed; there's nothing here
+ */
+ spin_unlock_irqrestore(&port->lock, flags);
+ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
+ scratch2, scratch3);
+ goto out;
+ }
+ }
+
+ save_mcr = serial_in(up, UART_MCR);
+ save_lcr = serial_in(up, UART_LCR);
+
+ /*
+ * Check to see if a UART is really there. Certain broken
+ * internal modems based on the Rockwell chipset fail this
+ * test, because they apparently don't implement the loopback
+ * test mode. So this test is skipped on the COM 1 through
+ * COM 4 ports. This *should* be safe, since no board
+ * manufacturer would be stupid enough to design a board
+ * that conflicts with COM 1-4 --- we hope!
+ */
+ if (!(port->flags & UPF_SKIP_TEST)) {
+ serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A);
+ status1 = serial_in(up, UART_MSR) & 0xF0;
+ serial_out(up, UART_MCR, save_mcr);
+ if (status1 != 0x90) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ DEBUG_AUTOCONF("LOOP test failed (%02x) ",
+ status1);
+ goto out;
+ }
+ }
+
+ /*
+ * We're pretty sure there's a port here. Lets find out what
+ * type of port it is. The IIR top two bits allows us to find
+ * out if it's 8250 or 16450, 16550, 16550A or later. This
+ * determines what we test for next.
+ *
+ * We also initialise the EFR (if any) to zero for later. The
+ * EFR occupies the same register location as the FCR and IIR.
+ */
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(up, UART_EFR, 0);
+ serial_out(up, UART_LCR, 0);
+
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ scratch = serial_in(up, UART_IIR) >> 6;
+
+ switch (scratch) {
+ case 0:
+ autoconfig_8250(up);
+ break;
+ case 1:
+ port->type = PORT_UNKNOWN;
+ break;
+ case 2:
+ port->type = PORT_16550;
+ break;
+ case 3:
+ autoconfig_16550a(up);
+ break;
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Only probe for RSA ports if we got the region.
+ */
+ if (port->type == PORT_16550A && probeflags & PROBE_RSA) {
+ int i;
+
+ for (i = 0 ; i < probe_rsa_count; ++i) {
+ if (probe_rsa[i] == port->iobase && __enable_rsa(up)) {
+ port->type = PORT_RSA;
+ break;
+ }
+ }
+ }
+#endif
+
+ serial_out(up, UART_LCR, save_lcr);
+
+ port->fifosize = uart_config[up->port.type].fifo_size;
+ old_capabilities = up->capabilities;
+ up->capabilities = uart_config[port->type].flags;
+ up->tx_loadsz = uart_config[port->type].tx_loadsz;
+
+ if (port->type == PORT_UNKNOWN)
+ goto out_lock;
+
+ /*
+ * Reset the UART.
+ */
+#ifdef CONFIG_SERIAL_8250_RSA
+ if (port->type == PORT_RSA)
+ serial_out(up, UART_RSA_FRR, 0);
+#endif
+ serial_out(up, UART_MCR, save_mcr);
+ serial8250_clear_fifos(up);
+ serial_in(up, UART_RX);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_out(up, UART_IER, UART_IER_UUE);
+ else
+ serial_out(up, UART_IER, 0);
+
+out_lock:
+ spin_unlock_irqrestore(&port->lock, flags);
+ if (up->capabilities != old_capabilities) {
+ printk(KERN_WARNING
+ "ttyS%d: detected caps %08x should be %08x\n",
+ serial_index(port), old_capabilities,
+ up->capabilities);
+ }
+out:
+ DEBUG_AUTOCONF("iir=%d ", scratch);
+ DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name);
+}
+
+static void autoconfig_irq(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ unsigned char save_mcr, save_ier;
+ unsigned char save_ICP = 0;
+ unsigned int ICP = 0;
+ unsigned long irqs;
+ int irq;
+
+ if (port->flags & UPF_FOURPORT) {
+ ICP = (port->iobase & 0xfe0) | 0x1f;
+ save_ICP = inb_p(ICP);
+ outb_p(0x80, ICP);
+ inb_p(ICP);
+ }
+
+ /* forget possible initially masked and pending IRQ */
+ probe_irq_off(probe_irq_on());
+ save_mcr = serial_in(up, UART_MCR);
+ save_ier = serial_in(up, UART_IER);
+ serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
+
+ irqs = probe_irq_on();
+ serial_out(up, UART_MCR, 0);
+ udelay(10);
+ if (port->flags & UPF_FOURPORT) {
+ serial_out(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS);
+ } else {
+ serial_out(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
+ }
+ serial_out(up, UART_IER, 0x0f); /* enable all intrs */
+ serial_in(up, UART_LSR);
+ serial_in(up, UART_RX);
+ serial_in(up, UART_IIR);
+ serial_in(up, UART_MSR);
+ serial_out(up, UART_TX, 0xFF);
+ udelay(20);
+ irq = probe_irq_off(irqs);
+
+ serial_out(up, UART_MCR, save_mcr);
+ serial_out(up, UART_IER, save_ier);
+
+ if (port->flags & UPF_FOURPORT)
+ outb_p(save_ICP, ICP);
+
+ port->irq = (irq > 0) ? irq : 0;
+}
+
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+ if (p->ier & UART_IER_THRI) {
+ p->ier &= ~UART_IER_THRI;
+ serial_out(p, UART_IER, p->ier);
+ }
+}
+
+static void serial8250_stop_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ __stop_tx(up);
+
+ /*
+ * We really want to stop the transmitter from sending.
+ */
+ if (port->type == PORT_16C950) {
+ up->acr |= UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void serial8250_start_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ if (up->dma && !serial8250_tx_dma(up)) {
+ return;
+ } else if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_port_out(port, UART_IER, up->ier);
+
+ if (up->bugs & UART_BUG_TXEN) {
+ unsigned char lsr;
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ if (lsr & UART_LSR_TEMT)
+ serial8250_tx_chars(up);
+ }
+ }
+
+ /*
+ * Re-enable the transmitter if we disabled it.
+ */
+ if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
+ up->acr &= ~UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_port_out(port, UART_IER, up->ier);
+}
+
+static void serial8250_enable_ms(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ /* no MSR capabilities */
+ if (up->bugs & UART_BUG_NOMSR)
+ return;
+
+ up->ier |= UART_IER_MSI;
+ serial_port_out(port, UART_IER, up->ier);
+}
+
+/*
+ * serial8250_rx_chars: processes according to the passed in LSR
+ * value, and returns the remaining LSR bits not handled
+ * by this Rx routine.
+ */
+unsigned char
+serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
+{
+ struct uart_port *port = &up->port;
+ unsigned char ch;
+ int max_count = 256;
+ char flag;
+
+ do {
+ if (likely(lsr & UART_LSR_DR))
+ ch = serial_in(up, UART_RX);
+ else
+ /*
+ * Intel 82571 has a Serial Over Lan device that will
+ * set UART_LSR_BI without setting UART_LSR_DR when
+ * it receives a break. To avoid reading from the
+ * receive buffer without UART_LSR_DR bit set, we
+ * just force the read character to be 0
+ */
+ ch = 0;
+
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ lsr |= up->lsr_saved_flags;
+ up->lsr_saved_flags = 0;
+
+ if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ port->icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (lsr & UART_LSR_PE)
+ port->icount.parity++;
+ else if (lsr & UART_LSR_FE)
+ port->icount.frame++;
+ if (lsr & UART_LSR_OE)
+ port->icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ lsr &= port->read_status_mask;
+
+ if (lsr & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (lsr & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (lsr & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
+
+ignore_char:
+ lsr = serial_in(up, UART_LSR);
+ } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(&port->state->port);
+ spin_lock(&port->lock);
+ return lsr;
+}
+EXPORT_SYMBOL_GPL(serial8250_rx_chars);
+
+void serial8250_tx_chars(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ int count;
+
+ if (port->x_char) {
+ serial_out(up, UART_TX, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_tx_stopped(port)) {
+ serial8250_stop_tx(port);
+ return;
+ }
+ if (uart_circ_empty(xmit)) {
+ __stop_tx(up);
+ return;
+ }
+
+ count = up->tx_loadsz;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ if (up->capabilities & UART_CAP_HFIFO) {
+ if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+ BOTH_EMPTY)
+ break;
+ }
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ __stop_tx(up);
+}
+EXPORT_SYMBOL_GPL(serial8250_tx_chars);
+
+unsigned int serial8250_modem_status(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ unsigned int status = serial_in(up, UART_MSR);
+
+ status |= up->msr_saved_flags;
+ up->msr_saved_flags = 0;
+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
+ port->state != NULL) {
+ if (status & UART_MSR_TERI)
+ port->icount.rng++;
+ if (status & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
+ }
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(serial8250_modem_status);
+
+/*
+ * This handles the interrupt from one port.
+ */
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
+{
+ unsigned char status;
+ unsigned long flags;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ int dma_err = 0;
+
+ if (iir & UART_IIR_NO_INT)
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ status = serial_port_in(port, UART_LSR);
+
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & (UART_LSR_DR | UART_LSR_BI)) {
+ if (up->dma)
+ dma_err = serial8250_rx_dma(up, iir);
+
+ if (!up->dma || dma_err)
+ status = serial8250_rx_chars(up, status);
+ }
+ serial8250_modem_status(up);
+ if (status & UART_LSR_THRE)
+ serial8250_tx_chars(up);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(serial8250_handle_irq);
+
+static int serial8250_default_handle_irq(struct uart_port *port)
+{
+ unsigned int iir = serial_port_in(port, UART_IIR);
+
+ return serial8250_handle_irq(port, iir);
+}
+
+/*
+ * These Exar UARTs have an extra interrupt indicator that could
+ * fire for a few unimplemented interrupts. One of which is a
+ * wakeup event when coming out of sleep. Put this here just
+ * to be on the safe side that these interrupts don't go unhandled.
+ */
+static int exar_handle_irq(struct uart_port *port)
+{
+ unsigned char int0, int1, int2, int3;
+ unsigned int iir = serial_port_in(port, UART_IIR);
+ int ret;
+
+ ret = serial8250_handle_irq(port, iir);
+
+ if ((port->type == PORT_XR17V35X) ||
+ (port->type == PORT_XR17D15X)) {
+ int0 = serial_port_in(port, 0x80);
+ int1 = serial_port_in(port, 0x81);
+ int2 = serial_port_in(port, 0x82);
+ int3 = serial_port_in(port, 0x83);
+ }
+
+ return ret;
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0, handled = 0;
+
+ DEBUG_INTR("serial8250_interrupt(%d)...", irq);
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_8250_port *up;
+ struct uart_port *port;
+
+ up = list_entry(l, struct uart_8250_port, list);
+ port = &up->port;
+
+ if (port->handle_irq(port)) {
+ handled = 1;
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ /* If we hit this, we're dead. */
+ printk_ratelimited(KERN_ERR
+ "serial8250: too much work for irq%d\n", irq);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+ spin_unlock_irq(&i->lock);
+ /* List empty so throw away the hash node */
+ if (i->head == NULL) {
+ hlist_del(&i->node);
+ kfree(i);
+ }
+}
+
+static int serial_link_irq_chain(struct uart_8250_port *up)
+{
+ struct hlist_head *h;
+ struct hlist_node *n;
+ struct irq_info *i;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+
+ if (n == NULL) {
+ i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
+ if (i == NULL) {
+ mutex_unlock(&hash_mutex);
+ return -ENOMEM;
+ }
+ spin_lock_init(&i->lock);
+ i->irq = up->port.irq;
+ hlist_add_head(&i->node, h);
+ }
+ mutex_unlock(&hash_mutex);
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+ irq_flags |= up->port.irqflags;
+ ret = request_irq(up->port.irq, serial8250_interrupt,
+ irq_flags, "serial", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_8250_port *up)
+{
+ struct irq_info *i;
+ struct hlist_node *n;
+ struct hlist_head *h;
+
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+
+ BUG_ON(n == NULL);
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head))
+ free_irq(up->port.irq, i);
+
+ serial_do_unlink(i, up);
+ mutex_unlock(&hash_mutex);
+}
+
+/*
+ * This function is used to handle ports that do not have an
+ * interrupt. This doesn't work very well for 16450's, but gives
+ * barely passable results for a 16550A. (Although at the expense
+ * of much CPU overhead).
+ */
+static void serial8250_timeout(unsigned long data)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)data;
+
+ up->port.handle_irq(&up->port);
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
+}
+
+static void serial8250_backup_timeout(unsigned long data)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)data;
+ unsigned int iir, ier = 0, lsr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Must disable interrupts or else we risk racing with the interrupt
+ * based handler.
+ */
+ if (up->port.irq) {
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+ }
+
+ iir = serial_in(up, UART_IIR);
+
+ /*
+ * This should be a safe test for anyone who doesn't trust the
+ * IIR bits on their UART, but it's specifically designed for
+ * the "Diva" UART used on the management processor on many HP
+ * ia64 and parisc boxes.
+ */
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
+ (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
+ (lsr & UART_LSR_THRE)) {
+ iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
+ iir |= UART_IIR_THRI;
+ }
+
+ if (!(iir & UART_IIR_NO_INT))
+ serial8250_tx_chars(up);
+
+ if (up->port.irq)
+ serial_out(up, UART_IER, ier);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* Standard timer interval plus 0.2s to keep the port running */
+ mod_timer(&up->timer,
+ jiffies + uart_poll_timeout(&up->port) + HZ / 5);
+}
+
+static unsigned int serial8250_tx_empty(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+ unsigned int lsr;
+
+ spin_lock_irqsave(&port->lock, flags);
+ lsr = serial_port_in(port, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned int status;
+ unsigned int ret;
+
+ status = serial8250_modem_status(up);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
+
+ serial_port_out(port, UART_MCR, mcr);
+}
+
+static void serial8250_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_port_out(port, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ for (;;) {
+ status = serial_in(up, UART_LSR);
+
+ up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
+
+ if ((status & bits) == bits)
+ break;
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ }
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ unsigned int tmout;
+ for (tmout = 1000000; tmout; tmout--) {
+ unsigned int msr = serial_in(up, UART_MSR);
+ up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
+ if (msr & UART_MSR_CTS)
+ break;
+ udelay(1);
+ touch_nmi_watchdog();
+ }
+ }
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial8250_get_poll_char(struct uart_port *port)
+{
+ unsigned char lsr = serial_port_in(port, UART_LSR);
+
+ if (!(lsr & UART_LSR_DR))
+ return NO_POLL_CHAR;
+
+ return serial_port_in(port, UART_RX);
+}
+
+
+static void serial8250_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ier;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_port_in(port, UART_IER);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_port_out(port, UART_IER, UART_IER_UUE);
+ else
+ serial_port_out(port, UART_IER, 0);
+
+ wait_for_xmitr(up, BOTH_EMPTY);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_port_out(port, UART_TX, c);
+ if (c == 10) {
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_port_out(port, UART_TX, 13);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_port_out(port, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+static int serial8250_startup(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+ unsigned char lsr, iir;
+ int retval;
+
+ if (port->type == PORT_8250_CIR)
+ return -ENODEV;
+
+ if (!port->fifosize)
+ port->fifosize = uart_config[port->type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[port->type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[port->type].flags;
+ up->mcr = 0;
+
+ if (port->iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
+ if (port->type == PORT_16C950) {
+ /* Wake up and initialize UART */
+ up->acr = 0;
+ serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_port_out(port, UART_EFR, UART_EFR_ECB);
+ serial_port_out(port, UART_IER, 0);
+ serial_port_out(port, UART_LCR, 0);
+ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
+ serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_port_out(port, UART_EFR, UART_EFR_ECB);
+ serial_port_out(port, UART_LCR, 0);
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * If this is an RSA port, see if we can kick it up to the
+ * higher speed clock.
+ */
+ enable_rsa(up);
+#endif
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial8250_clear_fifos(up);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ serial_port_in(port, UART_LSR);
+ serial_port_in(port, UART_RX);
+ serial_port_in(port, UART_IIR);
+ serial_port_in(port, UART_MSR);
+
+ /*
+ * At this point, there's no way the LSR could still be 0xff;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (!(port->flags & UPF_BUGGY_UART) &&
+ (serial_port_in(port, UART_LSR) == 0xff)) {
+ printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ serial_index(port));
+ return -ENODEV;
+ }
+
+ /*
+ * For a XR16C850, we need to set the trigger levels
+ */
+ if (port->type == PORT_16850) {
+ unsigned char fctr;
+
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+
+ fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
+ serial_port_out(port, UART_FCTR,
+ fctr | UART_FCTR_TRGD | UART_FCTR_RX);
+ serial_port_out(port, UART_TRG, UART_TRG_96);
+ serial_port_out(port, UART_FCTR,
+ fctr | UART_FCTR_TRGD | UART_FCTR_TX);
+ serial_port_out(port, UART_TRG, UART_TRG_96);
+
+ serial_port_out(port, UART_LCR, 0);
+ }
+
+ if (port->irq) {
+ unsigned char iir1;
+ /*
+ * Test for UARTs that do not reassert THRE when the
+ * transmitter is idle and the interrupt has already
+ * been cleared. Real 16550s should always reassert
+ * this interrupt whenever the transmitter is idle and
+ * the interrupt is enabled. Delays are necessary to
+ * allow register changes to become visible.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+ if (up->port.irqflags & IRQF_SHARED)
+ disable_irq_nosync(port->irq);
+
+ wait_for_xmitr(up, UART_LSR_THRE);
+ serial_port_out_sync(port, UART_IER, UART_IER_THRI);
+ udelay(1); /* allow THRE to set */
+ iir1 = serial_port_in(port, UART_IIR);
+ serial_port_out(port, UART_IER, 0);
+ serial_port_out_sync(port, UART_IER, UART_IER_THRI);
+ udelay(1); /* allow a working UART time to re-assert THRE */
+ iir = serial_port_in(port, UART_IIR);
+ serial_port_out(port, UART_IER, 0);
+
+ if (port->irqflags & IRQF_SHARED)
+ enable_irq(port->irq);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * If the interrupt is not reasserted, or we otherwise
+ * don't trust the iir, setup a timer to kick the UART
+ * on a regular basis.
+ */
+ if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
+ up->port.flags & UPF_BUG_THRE) {
+ up->bugs |= UART_BUG_THRE;
+ pr_debug("ttyS%d - using backup timer\n",
+ serial_index(port));
+ }
+ }
+
+ /*
+ * The above check will only give an accurate result the first time
+ * the port is opened so this value needs to be preserved.
+ */
+ if (up->bugs & UART_BUG_THRE) {
+ up->timer.function = serial8250_backup_timeout;
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies +
+ uart_poll_timeout(port) + HZ / 5);
+ }
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!port->irq) {
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
+ } else {
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ if (!up->port.irq)
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ /*
+ * Most PC uarts need OUT2 raised to enable interrupts.
+ */
+ if (port->irq)
+ up->port.mctrl |= TIOCM_OUT2;
+
+ serial8250_set_mctrl(port, port->mctrl);
+
+ /* Serial over Lan (SoL) hack:
+ Intel 8257x Gigabit ethernet chips have a
+ 16550 emulation, to be used for Serial Over Lan.
+ Those chips take a longer time than a normal
+ serial device to signalize that a transmission
+ data was queued. Due to that, the above test generally
+ fails. One solution would be to delay the reading of
+ iir. However, this is not reliable, since the timeout
+ is variable. So, let's just don't test if we receive
+ TX irq. This way, we'll never enable UART_BUG_TXEN.
+ */
+ if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
+ goto dont_test_tx_en;
+
+ /*
+ * Do a quick test to see if we receive an
+ * interrupt when we enable the TX irq.
+ */
+ serial_port_out(port, UART_IER, UART_IER_THRI);
+ lsr = serial_port_in(port, UART_LSR);
+ iir = serial_port_in(port, UART_IIR);
+ serial_port_out(port, UART_IER, 0);
+
+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
+ if (!(up->bugs & UART_BUG_TXEN)) {
+ up->bugs |= UART_BUG_TXEN;
+ pr_debug("ttyS%d - enabling bad tx status workarounds\n",
+ serial_index(port));
+ }
+ } else {
+ up->bugs &= ~UART_BUG_TXEN;
+ }
+
+dont_test_tx_en:
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * Clear the interrupt registers again for luck, and clear the
+ * saved flags to avoid getting false values from polling
+ * routines or the previous session.
+ */
+ serial_port_in(port, UART_LSR);
+ serial_port_in(port, UART_RX);
+ serial_port_in(port, UART_IIR);
+ serial_port_in(port, UART_MSR);
+ up->lsr_saved_flags = 0;
+ up->msr_saved_flags = 0;
+
+ /*
+ * Request DMA channels for both RX and TX.
+ */
+ if (up->dma) {
+ retval = serial8250_request_dma(up);
+ if (retval) {
+ pr_warn_ratelimited("ttyS%d - failed to request DMA\n",
+ serial_index(port));
+ up->dma = NULL;
+ }
+ }
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI;
+ serial_port_out(port, UART_IER, up->ier);
+
+ if (port->flags & UPF_FOURPORT) {
+ unsigned int icp;
+ /*
+ * Enable interrupts on the AST Fourport board
+ */
+ icp = (port->iobase & 0xfe0) | 0x01f;
+ outb_p(0x80, icp);
+ inb_p(icp);
+ }
+
+ return 0;
+}
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_port_out(port, UART_IER, 0);
+
+ if (up->dma)
+ serial8250_release_dma(up);
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (port->flags & UPF_FOURPORT) {
+ /* reset interrupts on the AST Fourport board */
+ inb((port->iobase & 0xfe0) | 0x1f);
+ port->mctrl |= TIOCM_OUT1;
+ } else
+ port->mctrl &= ~TIOCM_OUT2;
+
+ serial8250_set_mctrl(port, port->mctrl);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_port_out(port, UART_LCR,
+ serial_port_in(port, UART_LCR) & ~UART_LCR_SBC);
+ serial8250_clear_fifos(up);
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Reset the RSA board back to 115kbps compat mode.
+ */
+ disable_rsa(up);
+#endif
+
+ /*
+ * Read data port to reset things, and then unlink from
+ * the IRQ chain.
+ */
+ serial_port_in(port, UART_RX);
+
+ del_timer_sync(&up->timer);
+ up->timer.function = serial8250_timeout;
+ if (port->irq)
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
+{
+ unsigned int quot;
+
+ /*
+ * Handle magic divisors for baud rates above baud_base on
+ * SMSC SuperIO chips.
+ */
+ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/4))
+ quot = 0x8001;
+ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/8))
+ quot = 0x8002;
+ else
+ quot = uart_get_divisor(port, baud);
+
+ return quot;
+}
+
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+ int fifo_bug = 0;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB) {
+ cval |= UART_LCR_PARITY;
+ if (up->bugs & UART_BUG_PARITY)
+ fifo_bug = 1;
+ }
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 16);
+ quot = serial8250_get_divisor(port, baud);
+
+ /*
+ * Oxford Semi 952 rev B workaround
+ */
+ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
+ quot++;
+
+ if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
+ fcr = uart_config[port->type].fcr;
+ if (baud < 2400 || fifo_bug) {
+ fcr &= ~UART_FCR_TRIGGER_MASK;
+ fcr |= UART_FCR_TRIGGER_1;
+ }
+ }
+
+ /*
+ * MCR-based auto flow control. When AFE is enabled, RTS will be
+ * deasserted when the receive FIFO contains more characters than
+ * the trigger, or the MCR RTS bit is cleared. In the case where
+ * the remote UART is not using CTS auto flow control, we must
+ * have sufficient FIFO entries for the latency of the remote
+ * UART to respond. IOW, at least 32 bytes of FIFO.
+ */
+ if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {
+ up->mcr &= ~UART_MCR_AFE;
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE;
+ }
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (!(up->bugs & UART_BUG_NOMSR) &&
+ UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+ if (up->capabilities & UART_CAP_UUE)
+ up->ier |= UART_IER_UUE;
+ if (up->capabilities & UART_CAP_RTOIE)
+ up->ier |= UART_IER_RTOIE;
+
+ serial_port_out(port, UART_IER, up->ier);
+
+ if (up->capabilities & UART_CAP_EFR) {
+ unsigned char efr = 0;
+ /*
+ * TI16C752/Startech hardware flow control. FIXME:
+ * - TI16C752 requires control thresholds to be set.
+ * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
+ */
+ if (termios->c_cflag & CRTSCTS)
+ efr |= UART_EFR_CTS;
+
+ serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+ if (port->flags & UPF_EXAR_EFR)
+ serial_port_out(port, UART_XR_EFR, efr);
+ else
+ serial_port_out(port, UART_EFR, efr);
+ }
+
+ /* Workaround to enable 115200 baud on OMAP1510 internal ports */
+ if (is_omap1510_8250(up)) {
+ if (baud == 115200) {
+ quot = 1;
+ serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
+ } else
+ serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
+ }
+
+ /*
+ * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
+ * otherwise just set DLAB
+ */
+ if (up->capabilities & UART_NATSEMI)
+ serial_port_out(port, UART_LCR, 0xe0);
+ else
+ serial_port_out(port, UART_LCR, cval | UART_LCR_DLAB);
+
+ serial_dl_write(up, quot);
+
+ /*
+ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ * is written without DLAB set, this mode will be disabled.
+ */
+ if (port->type == PORT_16750)
+ serial_port_out(port, UART_FCR, fcr);
+
+ serial_port_out(port, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ if (port->type != PORT_16750) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ if (fcr & UART_FCR_ENABLE_FIFO)
+ serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_port_out(port, UART_FCR, fcr); /* set fcr */
+ }
+ serial8250_set_mctrl(port, port->mctrl);
+ spin_unlock_irqrestore(&port->lock, flags);
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+EXPORT_SYMBOL(serial8250_do_set_termios);
+
+static void
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ if (port->set_termios)
+ port->set_termios(port, termios, old);
+ else
+ serial8250_do_set_termios(port, termios, old);
+}
+
+static void
+serial8250_set_ldisc(struct uart_port *port, int new)
+{
+ if (new == N_PPS) {
+ port->flags |= UPF_HARDPPS_CD;
+ serial8250_enable_ms(port);
+ } else
+ port->flags &= ~UPF_HARDPPS_CD;
+}
+
+
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_8250_port *p =
+ container_of(port, struct uart_8250_port, port);
+
+ serial8250_set_sleep(p, state != 0);
+}
+EXPORT_SYMBOL(serial8250_do_pm);
+
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ if (port->pm)
+ port->pm(port, state, oldstate);
+ else
+ serial8250_do_pm(port, state, oldstate);
+}
+
+static unsigned int serial8250_port_size(struct uart_8250_port *pt)
+{
+ if (pt->port.iotype == UPIO_AU)
+ return 0x1000;
+ if (is_omap1_8250(pt))
+ return 0x16 << pt->port.regshift;
+
+ return 8 << pt->port.regshift;
+}
+
+/*
+ * Resource handling.
+ */
+static int serial8250_request_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = serial8250_port_size(up);
+ struct uart_port *port = &up->port;
+ int ret = 0;
+
+ switch (port->iotype) {
+ case UPIO_AU:
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM:
+ if (!port->mapbase)
+ break;
+
+ if (!request_mem_region(port->mapbase, size, "serial")) {
+ ret = -EBUSY;
+ break;
+ }
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap_nocache(port->mapbase, size);
+ if (!port->membase) {
+ release_mem_region(port->mapbase, size);
+ ret = -ENOMEM;
+ }
+ }
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ if (!request_region(port->iobase, size, "serial"))
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void serial8250_release_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = serial8250_port_size(up);
+ struct uart_port *port = &up->port;
+
+ switch (port->iotype) {
+ case UPIO_AU:
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM:
+ if (!port->mapbase)
+ break;
+
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, size);
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(port->iobase, size);
+ break;
+ }
+}
+
+static int serial8250_request_rsa_resource(struct uart_8250_port *up)
+{
+ unsigned long start = UART_RSA_BASE << up->port.regshift;
+ unsigned int size = 8 << up->port.regshift;
+ struct uart_port *port = &up->port;
+ int ret = -EINVAL;
+
+ switch (port->iotype) {
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ start += port->iobase;
+ if (request_region(start, size, "serial-rsa"))
+ ret = 0;
+ else
+ ret = -EBUSY;
+ break;
+ }
+
+ return ret;
+}
+
+static void serial8250_release_rsa_resource(struct uart_8250_port *up)
+{
+ unsigned long offset = UART_RSA_BASE << up->port.regshift;
+ unsigned int size = 8 << up->port.regshift;
+ struct uart_port *port = &up->port;
+
+ switch (port->iotype) {
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(port->iobase + offset, size);
+ break;
+ }
+}
+
+static void serial8250_release_port(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ serial8250_release_std_resource(up);
+ if (port->type == PORT_RSA)
+ serial8250_release_rsa_resource(up);
+}
+
+static int serial8250_request_port(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ int ret;
+
+ if (port->type == PORT_8250_CIR)
+ return -ENODEV;
+
+ ret = serial8250_request_std_resource(up);
+ if (ret == 0 && port->type == PORT_RSA) {
+ ret = serial8250_request_rsa_resource(up);
+ if (ret < 0)
+ serial8250_release_std_resource(up);
+ }
+
+ return ret;
+}
+
+static void serial8250_config_port(struct uart_port *port, int flags)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ int probeflags = PROBE_ANY;
+ int ret;
+
+ if (port->type == PORT_8250_CIR)
+ return;
+
+ /*
+ * Find the region that we can probe for. This in turn
+ * tells us whether we can probe for the type of port.
+ */
+ ret = serial8250_request_std_resource(up);
+ if (ret < 0)
+ return;
+
+ ret = serial8250_request_rsa_resource(up);
+ if (ret < 0)
+ probeflags &= ~PROBE_RSA;
+
+ if (port->iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(up, probeflags);
+
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (port->type == PORT_16550A && port->iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+
+ if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
+ autoconfig_irq(up);
+
+ if (port->type != PORT_RSA && probeflags & PROBE_RSA)
+ serial8250_release_rsa_resource(up);
+ if (port->type == PORT_UNKNOWN)
+ serial8250_release_std_resource(up);
+
+ /* Fixme: probably not the best place for this */
+ if ((port->type == PORT_XR17V35X) ||
+ (port->type == PORT_XR17D15X))
+ port->handle_irq = exar_handle_irq;
+}
+
+static int
+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= nr_irqs || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
+ ser->type == PORT_STARTECH)
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+serial8250_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops serial8250_pops = {
+ .tx_empty = serial8250_tx_empty,
+ .set_mctrl = serial8250_set_mctrl,
+ .get_mctrl = serial8250_get_mctrl,
+ .stop_tx = serial8250_stop_tx,
+ .start_tx = serial8250_start_tx,
+ .stop_rx = serial8250_stop_rx,
+ .enable_ms = serial8250_enable_ms,
+ .break_ctl = serial8250_break_ctl,
+ .startup = serial8250_startup,
+ .shutdown = serial8250_shutdown,
+ .set_termios = serial8250_set_termios,
+ .set_ldisc = serial8250_set_ldisc,
+ .pm = serial8250_pm,
+ .type = serial8250_type,
+ .release_port = serial8250_release_port,
+ .request_port = serial8250_request_port,
+ .config_port = serial8250_config_port,
+ .verify_port = serial8250_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial8250_get_poll_char,
+ .poll_put_char = serial8250_put_poll_char,
+#endif
+};
+
+static struct uart_8250_port serial8250_ports[UART_NR];
+
+static void (*serial8250_isa_config)(int port, struct uart_port *up,
+ unsigned short *capabilities);
+
+void serial8250_set_isa_configurator(
+ void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
+{
+ serial8250_isa_config = v;
+}
+EXPORT_SYMBOL(serial8250_set_isa_configurator);
+
+static void __init serial8250_isa_init_ports(void)
+{
+ struct uart_8250_port *up;
+ static int first = 1;
+ int i, irqflag = 0;
+
+ if (!first)
+ return;
+ first = 0;
+
+ if (nr_uarts > UART_NR)
+ nr_uarts = UART_NR;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ struct uart_port *port = &up->port;
+
+ port->line = i;
+ spin_lock_init(&port->lock);
+
+ init_timer(&up->timer);
+ up->timer.function = serial8250_timeout;
+ up->cur_iotype = 0xFF;
+
+ /*
+ * ALPHA_KLUDGE_MCR needs to be killed.
+ */
+ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
+ up->mcr_force = ALPHA_KLUDGE_MCR;
+
+ port->ops = &serial8250_pops;
+ }
+
+ if (share_irqs)
+ irqflag = IRQF_SHARED;
+
+ for (i = 0, up = serial8250_ports;
+ i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
+ i++, up++) {
+ struct uart_port *port = &up->port;
+
+ port->iobase = old_serial_port[i].port;
+ port->irq = irq_canonicalize(old_serial_port[i].irq);
+ port->irqflags = old_serial_port[i].irqflags;
+ port->uartclk = old_serial_port[i].baud_base * 16;
+ port->flags = old_serial_port[i].flags;
+ port->hub6 = old_serial_port[i].hub6;
+ port->membase = old_serial_port[i].iomem_base;
+ port->iotype = old_serial_port[i].io_type;
+ port->regshift = old_serial_port[i].iomem_reg_shift;
+ set_io_from_upio(port);
+ port->irqflags |= irqflag;
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(i, &up->port, &up->capabilities);
+
+ }
+}
+
+static void
+serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
+{
+ up->port.type = type;
+ if (!up->port.fifosize)
+ up->port.fifosize = uart_config[type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[type].flags;
+}
+
+static void __init
+serial8250_register_ports(struct uart_driver *drv, struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.dev)
+ continue;
+
+ up->port.dev = dev;
+
+ if (up->port.flags & UPF_FIXED_TYPE)
+ serial8250_init_fixed_type_port(up, up->port.type);
+
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+
+static void serial8250_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ wait_for_xmitr(up, UART_LSR_THRE);
+ serial_port_out(port, UART_TX, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial8250_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_8250_port *up = &serial8250_ports[co->index];
+ struct uart_port *port = &up->port;
+ unsigned long flags;
+ unsigned int ier;
+ int locked = 1;
+
+ touch_nmi_watchdog();
+
+ local_irq_save(flags);
+ if (port->sysrq) {
+ /* serial8250_handle_irq() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&port->lock);
+ } else
+ spin_lock(&port->lock);
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_port_in(port, UART_IER);
+
+ if (up->capabilities & UART_CAP_UUE)
+ serial_port_out(port, UART_IER, UART_IER_UUE);
+ else
+ serial_port_out(port, UART_IER, 0);
+
+ uart_console_write(port, s, count, serial8250_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_port_out(port, UART_IER, ier);
+
+ /*
+ * The receive handling will happen properly because the
+ * receive ready bit will still be set; it is not cleared
+ * on read. However, modem control will not, we must
+ * call it if we have saved something in the saved flags
+ * while processing with interrupts off.
+ */
+ if (up->msr_saved_flags)
+ serial8250_modem_status(up);
+
+ if (locked)
+ spin_unlock(&port->lock);
+ local_irq_restore(flags);
+}
+
+static int __init serial8250_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= nr_uarts)
+ co->index = 0;
+ port = &serial8250_ports[co->index].port;
+ if (!port->iobase && !port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static int serial8250_console_early_setup(void)
+{
+ return serial8250_find_port_for_earlycon();
+}
+
+static struct console serial8250_console = {
+ .name = "ttyS",
+ .write = serial8250_console_write,
+ .device = uart_console_device,
+ .setup = serial8250_console_setup,
+ .early_setup = serial8250_console_early_setup,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
+ .index = -1,
+ .data = &serial8250_reg,
+};
+
+static int __init serial8250_console_init(void)
+{
+ serial8250_isa_init_ports();
+ register_console(&serial8250_console);
+ return 0;
+}
+console_initcall(serial8250_console_init);
+
+int serial8250_find_port(struct uart_port *p)
+{
+ int line;
+ struct uart_port *port;
+
+ for (line = 0; line < nr_uarts; line++) {
+ port = &serial8250_ports[line].port;
+ if (uart_match_port(p, port))
+ return line;
+ }
+ return -ENODEV;
+}
+
+#define SERIAL8250_CONSOLE &serial8250_console
+#else
+#define SERIAL8250_CONSOLE NULL
+#endif
+
+static struct uart_driver serial8250_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .cons = SERIAL8250_CONSOLE,
+};
+
+/*
+ * early_serial_setup - early registration for 8250 ports
+ *
+ * Setup an 8250 port structure prior to console initialisation. Use
+ * after console initialisation will cause undefined behaviour.
+ */
+int __init early_serial_setup(struct uart_port *port)
+{
+ struct uart_port *p;
+
+ if (port->line >= ARRAY_SIZE(serial8250_ports))
+ return -ENODEV;
+
+ serial8250_isa_init_ports();
+ p = &serial8250_ports[port->line].port;
+ p->iobase = port->iobase;
+ p->membase = port->membase;
+ p->irq = port->irq;
+ p->irqflags = port->irqflags;
+ p->uartclk = port->uartclk;
+ p->fifosize = port->fifosize;
+ p->regshift = port->regshift;
+ p->iotype = port->iotype;
+ p->flags = port->flags;
+ p->mapbase = port->mapbase;
+ p->private_data = port->private_data;
+ p->type = port->type;
+ p->line = port->line;
+
+ set_io_from_upio(p);
+ if (port->serial_in)
+ p->serial_in = port->serial_in;
+ if (port->serial_out)
+ p->serial_out = port->serial_out;
+ if (port->handle_irq)
+ p->handle_irq = port->handle_irq;
+ else
+ p->handle_irq = serial8250_default_handle_irq;
+
+ return 0;
+}
+
+/**
+ * serial8250_suspend_port - suspend one serial port
+ * @line: serial line number
+ *
+ * Suspend one serial port.
+ */
+void serial8250_suspend_port(int line)
+{
+ uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+/**
+ * serial8250_resume_port - resume one serial port
+ * @line: serial line number
+ *
+ * Resume one serial port.
+ */
+void serial8250_resume_port(int line)
+{
+ struct uart_8250_port *up = &serial8250_ports[line];
+ struct uart_port *port = &up->port;
+
+ if (up->capabilities & UART_NATSEMI) {
+ /* Ensure it's still in high speed mode */
+ serial_port_out(port, UART_LCR, 0xE0);
+
+ ns16550a_goto_highspeed(up);
+
+ serial_port_out(port, UART_LCR, 0);
+ port->uartclk = 921600*16;
+ }
+ uart_resume_port(&serial8250_reg, port);
+}
+
+/*
+ * Register a set of serial devices attached to a platform device. The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set.
+ */
+static int serial8250_probe(struct platform_device *dev)
+{
+ struct plat_serial8250_port *p = dev->dev.platform_data;
+ struct uart_8250_port uart;
+ int ret, i, irqflag = 0;
+
+ memset(&uart, 0, sizeof(uart));
+
+ if (share_irqs)
+ irqflag = IRQF_SHARED;
+
+ for (i = 0; p && p->flags != 0; p++, i++) {
+ uart.port.iobase = p->iobase;
+ uart.port.membase = p->membase;
+ uart.port.irq = p->irq;
+ uart.port.irqflags = p->irqflags;
+ uart.port.uartclk = p->uartclk;
+ uart.port.regshift = p->regshift;
+ uart.port.iotype = p->iotype;
+ uart.port.flags = p->flags;
+ uart.port.mapbase = p->mapbase;
+ uart.port.hub6 = p->hub6;
+ uart.port.private_data = p->private_data;
+ uart.port.type = p->type;
+ uart.port.serial_in = p->serial_in;
+ uart.port.serial_out = p->serial_out;
+ uart.port.handle_irq = p->handle_irq;
+ uart.port.handle_break = p->handle_break;
+ uart.port.set_termios = p->set_termios;
+ uart.port.pm = p->pm;
+ uart.port.dev = &dev->dev;
+ uart.port.irqflags |= irqflag;
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0) {
+ dev_err(&dev->dev, "unable to register port at index %d "
+ "(IO%lx MEM%llx IRQ%d): %d\n", i,
+ p->iobase, (unsigned long long)p->mapbase,
+ p->irq, ret);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int serial8250_remove(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.dev == &dev->dev)
+ serial8250_unregister_port(i);
+ }
+ return 0;
+}
+
+static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ uart_suspend_port(&serial8250_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static int serial8250_resume(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ serial8250_resume_port(i);
+ }
+
+ return 0;
+}
+
+static struct platform_driver serial8250_isa_driver = {
+ .probe = serial8250_probe,
+ .remove = serial8250_remove,
+ .suspend = serial8250_suspend,
+ .resume = serial8250_resume,
+ .driver = {
+ .name = "serial8250",
+ .owner = THIS_MODULE,
+ },
+};
+
+/*
+ * This "device" covers _all_ ISA 8250-compatible serial devices listed
+ * in the table in include/asm/serial.h
+ */
+static struct platform_device *serial8250_isa_devs;
+
+/*
+ * serial8250_register_8250_port and serial8250_unregister_port allows for
+ * 16x50 serial ports to be configured at run-time, to support PCMCIA
+ * modems and PCI multiport cards.
+ */
+static DEFINE_MUTEX(serial_mutex);
+
+static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
+{
+ int i;
+
+ /*
+ * First, find a port entry which matches.
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (uart_match_port(&serial8250_ports[i].port, port))
+ return &serial8250_ports[i];
+
+ /*
+ * We didn't find a matching entry, so look for the first
+ * free entry. We look for one which hasn't been previously
+ * used (indicated by zero iobase).
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
+ serial8250_ports[i].port.iobase == 0)
+ return &serial8250_ports[i];
+
+ /*
+ * That also failed. Last resort is to find any entry which
+ * doesn't have a real port associated with it.
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (serial8250_ports[i].port.type == PORT_UNKNOWN)
+ return &serial8250_ports[i];
+
+ return NULL;
+}
+
+/**
+ * serial8250_register_8250_port - register a serial port
+ * @up: serial port template
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use, it is hung up and unregistered
+ * first.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+int serial8250_register_8250_port(struct uart_8250_port *up)
+{
+ struct uart_8250_port *uart;
+ int ret = -ENOSPC;
+
+ if (up->port.uartclk == 0)
+ return -EINVAL;
+
+ mutex_lock(&serial_mutex);
+
+ uart = serial8250_find_match_or_unused(&up->port);
+ if (uart && uart->port.type != PORT_8250_CIR) {
+ if (uart->port.dev)
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+
+ uart->port.iobase = up->port.iobase;
+ uart->port.membase = up->port.membase;
+ uart->port.irq = up->port.irq;
+ uart->port.irqflags = up->port.irqflags;
+ uart->port.uartclk = up->port.uartclk;
+ uart->port.fifosize = up->port.fifosize;
+ uart->port.regshift = up->port.regshift;
+ uart->port.iotype = up->port.iotype;
+ uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
+ uart->bugs = up->bugs;
+ uart->port.mapbase = up->port.mapbase;
+ uart->port.private_data = up->port.private_data;
+ uart->port.fifosize = up->port.fifosize;
+ uart->tx_loadsz = up->tx_loadsz;
+ uart->capabilities = up->capabilities;
+
+ if (up->port.dev)
+ uart->port.dev = up->port.dev;
+
+ if (up->port.flags & UPF_FIXED_TYPE)
+ serial8250_init_fixed_type_port(uart, up->port.type);
+
+ set_io_from_upio(&uart->port);
+ /* Possibly override default I/O functions. */
+ if (up->port.serial_in)
+ uart->port.serial_in = up->port.serial_in;
+ if (up->port.serial_out)
+ uart->port.serial_out = up->port.serial_out;
+ if (up->port.handle_irq)
+ uart->port.handle_irq = up->port.handle_irq;
+ /* Possibly override set_termios call */
+ if (up->port.set_termios)
+ uart->port.set_termios = up->port.set_termios;
+ if (up->port.pm)
+ uart->port.pm = up->port.pm;
+ if (up->port.handle_break)
+ uart->port.handle_break = up->port.handle_break;
+ if (up->dl_read)
+ uart->dl_read = up->dl_read;
+ if (up->dl_write)
+ uart->dl_write = up->dl_write;
+ if (up->dma)
+ uart->dma = up->dma;
+
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
+
+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ }
+ mutex_unlock(&serial_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(serial8250_register_8250_port);
+
+/**
+ * serial8250_unregister_port - remove a 16x50 serial port at runtime
+ * @line: serial line number
+ *
+ * Remove one serial port. This may not be called from interrupt
+ * context. We hand the port back to the our control.
+ */
+void serial8250_unregister_port(int line)
+{
+ struct uart_8250_port *uart = &serial8250_ports[line];
+
+ mutex_lock(&serial_mutex);
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+ if (serial8250_isa_devs) {
+ uart->port.flags &= ~UPF_BOOT_AUTOCONF;
+ uart->port.type = PORT_UNKNOWN;
+ uart->port.dev = &serial8250_isa_devs->dev;
+ uart->capabilities = uart_config[uart->port.type].flags;
+ uart_add_one_port(&serial8250_reg, &uart->port);
+ } else {
+ uart->port.dev = NULL;
+ }
+ mutex_unlock(&serial_mutex);
+}
+EXPORT_SYMBOL(serial8250_unregister_port);
+
+static int __init serial8250_init(void)
+{
+ int ret;
+
+ serial8250_isa_init_ports();
+
+ printk(KERN_INFO "Serial: 8250/16550 driver, "
+ "%d ports, IRQ sharing %sabled\n", nr_uarts,
+ share_irqs ? "en" : "dis");
+
+#ifdef CONFIG_SPARC
+ ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+ serial8250_reg.nr = UART_NR;
+ ret = uart_register_driver(&serial8250_reg);
+#endif
+ if (ret)
+ goto out;
+
+ ret = serial8250_pnp_init();
+ if (ret)
+ goto unreg_uart_drv;
+
+ serial8250_isa_devs = platform_device_alloc("serial8250",
+ PLAT8250_DEV_LEGACY);
+ if (!serial8250_isa_devs) {
+ ret = -ENOMEM;
+ goto unreg_pnp;
+ }
+
+ ret = platform_device_add(serial8250_isa_devs);
+ if (ret)
+ goto put_dev;
+
+ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
+
+ ret = platform_driver_register(&serial8250_isa_driver);
+ if (ret == 0)
+ goto out;
+
+ platform_device_del(serial8250_isa_devs);
+put_dev:
+ platform_device_put(serial8250_isa_devs);
+unreg_pnp:
+ serial8250_pnp_exit();
+unreg_uart_drv:
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
+ uart_unregister_driver(&serial8250_reg);
+#endif
+out:
+ return ret;
+}
+
+static void __exit serial8250_exit(void)
+{
+ struct platform_device *isa_dev = serial8250_isa_devs;
+
+ /*
+ * This tells serial8250_unregister_port() not to re-register
+ * the ports (thereby making serial8250_isa_driver permanently
+ * in use.)
+ */
+ serial8250_isa_devs = NULL;
+
+ platform_driver_unregister(&serial8250_isa_driver);
+ platform_device_unregister(isa_dev);
+
+ serial8250_pnp_exit();
+
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
+ uart_unregister_driver(&serial8250_reg);
+#endif
+}
+
+module_init(serial8250_init);
+module_exit(serial8250_exit);
+
+EXPORT_SYMBOL(serial8250_suspend_port);
+EXPORT_SYMBOL(serial8250_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
+
+module_param(share_irqs, uint, 0644);
+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
+ " (unsafe)");
+
+module_param(nr_uarts, uint, 0644);
+MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
+
+module_param(skip_txen_test, uint, 0644);
+MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
+
+#ifdef CONFIG_SERIAL_8250_RSA
+module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
+MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
+#endif
+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
+ * working as well for the module options so we don't break people. We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables. So we stick them inside a dummy function to avoid
+ * those conflicts. The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky. I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250_core."
+
+ module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644);
+ module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644);
+ module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644);
+#ifdef CONFIG_SERIAL_8250_RSA
+ __module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
+ ¶m_array_ops, .arr = &__param_arr_probe_rsa,
+ 0444, -1);
+#endif
+}
+#else
+MODULE_ALIAS("8250_core");
+#endif
+#endif
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
#define PCI_VENDOR_ID_WCH 0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
/*
* Master list of serial port init/setup/exit quirks.
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = pci_plx9050_exit,
- },
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
+ /* WCH CH352 2S card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH352_2S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
/*
* ASIX devices with FIFO bug
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
- pbn_b0_4_115200 },
+ pbn_b2_4_115200 },
+ /* Unknown card - subdevice 0x1588 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+ pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+ 0x1000, 0x0012,
+ 0, 0, pbn_b0_bt_2_115200 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
/*
* Commtech, Inc. Fastcom adapters
*/
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
+ struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
- uart.port.iobase = pnp_port_start(dev, 2);
- uart.port.iotype = UPIO_PORT;
- } else if (pnp_port_valid(dev, 0)) {
- uart.port.iobase = pnp_port_start(dev, 0);
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+ else if (pnp_port_valid(dev, 0))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (pnp_resource_enabled(res)) {
+ uart.port.iobase = res->start;
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
Most people will say Y or M here, so that they can use serial mice,
modems and similar devices connecting to the standard serial ports.
+config SERIAL_8250_DEPRECATED_OPTIONS
+ bool "Support 8250_core.* kernel options (DEPRECATED)"
+ depends on SERIAL_8250
+ default y
+ ---help---
+ In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+ accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+ 8250.nr_uarts=4. We now renamed the module back to 8250, but if
+ anybody noticed in 3.7 and changed their userspace we still have to
+ keep the 8350_core.* options around until they revert the changes
+ they already did.
+
+ If 8250 is built as a module, this adds 8250_core alias instead.
+
+ If you did not notice yet and/or you have userspace from pre-3.7, it
+ is safe (and recommended) to say N here.
+
config SERIAL_8250_PNP
bool "8250/16550 PNP device support" if EXPERT
depends on SERIAL_8250 && PNP
# Makefile for the 8250 serial device drivers.
#
-obj-$(CONFIG_SERIAL_8250) += 8250_core.o
-8250_core-y := 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o
+8250-y := 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
config SERIAL_SAMSUNG_UARTS_4
bool
depends on PLAT_SAMSUNG
- default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+ default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
depends on PLAT_SAMSUNG
- default 6 if ARCH_S5P6450
+ default 6 if CPU_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
- ret = find_first_zero_bit(&atmel_ports_in_use,
- sizeof(atmel_ports_in_use));
+ ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
- if (ret > ATMEL_MAX_UART) {
+ if (ret >= ATMEL_MAX_UART) {
ret = -ENODEV;
goto err;
}
- if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+ if (test_and_set_bit(ret, atmel_ports_in_use)) {
/* port already in use */
ret = -EBUSY;
goto err;
/* "port" is allocated statically, so we shouldn't free it */
- clear_bit(port->line, &atmel_ports_in_use);
+ clear_bit(port->line, atmel_ports_in_use);
clk_put(atmel_port->clk);
*/
static void bcm_uart_do_rx(struct uart_port *port)
{
- struct tty_port *port = &port->state->port;
+ struct tty_port *tty_port = &port->state->port;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
bcm_uart_writel(port, val, UART_CTL_REG);
port->icount.overrun++;
- tty_insert_flip_char(port, 0, TTY_OVERRUN);
+ tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
}
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
if ((cstat & port->ignore_status_mask) == 0)
- tty_insert_flip_char(port, c, flag);
+ tty_insert_flip_char(tty_port, c, flag);
} while (--max_count);
- tty_flip_buffer_push(port);
+ tty_flip_buffer_push(tty_port);
}
/*
return 0;
psc_num = (port->mapbase & 0xf00) >> 8;
- snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
+ snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
psc_clk = clk_get(port->dev, clk_name);
if (IS_ERR(psc_clk)) {
dev_err(port->dev, "Failed to get PSC clock entry!\n");
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
+ { .compatible = "altr,16550-FIFO32",
+ .data = (void *)PORT_ALTR_16550_F32, },
+ { .compatible = "altr,16550-FIFO64",
+ .data = (void *)PORT_ALTR_16550_F64, },
+ { .compatible = "altr,16550-FIFO128",
+ .data = (void *)PORT_ALTR_16550_F128, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
#define UART_NR 4
static struct uart_sunsu_port sunsu_ports[UART_NR];
+static int nr_inst; /* Number of already registered ports */
#ifdef CONFIG_SERIO
printk("Console: ttyS%d (SU)\n",
(sunsu_reg.minor - 64) + co->index);
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= UART_NR)
- co->index = 0;
+ if (co->index > nr_inst)
+ return -ENODEV;
port = &sunsu_ports[co->index].port;
/*
static int su_probe(struct platform_device *op)
{
- static int inst;
struct device_node *dp = op->dev.of_node;
struct uart_sunsu_port *up;
struct resource *rp;
type = su_get_type(dp);
if (type == SU_PORT_PORT) {
- if (inst >= UART_NR)
+ if (nr_inst >= UART_NR)
return -EINVAL;
- up = &sunsu_ports[inst];
+ up = &sunsu_ports[nr_inst];
} else {
up = kzalloc(sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
}
- up->port.line = inst;
+ up->port.line = nr_inst;
spin_lock_init(&up->port.lock);
}
dev_set_drvdata(&op->dev, up);
+ nr_inst++;
+
return 0;
}
dev_set_drvdata(&op->dev, up);
- inst++;
+ nr_inst++;
return 0;
vt8500_port->uart.dev = &pdev->dev;
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
- vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
- if (!IS_ERR(vt8500_port->clk)) {
- vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
- } else {
- /* use the default of 24Mhz if not specified and warn */
- pr_warn("%s: serial clock source not specified\n", __func__);
- vt8500_port->uart.uartclk = 24000000;
- }
+ vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
snprintf(vt8500_port->name, sizeof(vt8500_port->name),
"VT8500 UART%d", pdev->id);
/* Receive Timeout register is enabled with value of 10 */
xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ /* Clear out any pending interrupts before enabling them */
+ xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
/* Set the Interrupt Registers with desired interrupts */
xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
struct tty_ldisc *disc;
tty = port->itty;
- if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+ if (tty == NULL)
return;
disc = tty_ldisc_ref(tty);
static struct vcs_poll_data *
vcs_poll_data_get(struct file *file)
{
- struct vcs_poll_data *poll = file->private_data;
+ struct vcs_poll_data *poll = file->private_data, *kill = NULL;
if (poll)
return poll;
file->private_data = poll;
} else {
/* someone else raced ahead of us */
- vcs_poll_data_free(poll);
+ kill = poll;
poll = file->private_data;
}
spin_unlock(&file->f_lock);
+ if (kill)
+ vcs_poll_data_free(kill);
return poll;
}
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB_COMMON) += phy/
+obj-$(CONFIG_USB_OTG_UTILS) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
#define TD_PIDEP_OFFSET 0x04
#define TD_PIDEPMASK_PID 0xF0
#define TD_PIDEPMASK_EP 0x0F
-#define TD_PORTLENMASK_DL 0x02FF
+#define TD_PORTLENMASK_DL 0x03FF
#define TD_PORTLENMASK_PN 0xC000
#define TD_STATUS_OFFSET 0x07
{
struct c67x00_td *td;
struct c67x00_urb_priv *urbp = urb->hcpriv;
- const __u8 active_flag = 1, retry_cnt = 1;
+ const __u8 active_flag = 1, retry_cnt = 3;
__u8 cmd = 0;
int tt = 0;
goto put_transceiver;
}
- retval = dbg_create_files(&ci->gadget.dev);
+ retval = dbg_create_files(ci->dev);
if (retval)
goto unreg_device;
dev_err(dev, "error = %i\n", retval);
remove_dbg:
- dbg_remove_files(&ci->gadget.dev);
+ dbg_remove_files(ci->dev);
unreg_device:
device_unregister(&ci->gadget.dev);
put_transceiver:
if (ci->global_phy)
usb_put_phy(ci->transceiver);
}
- dbg_remove_files(&ci->gadget.dev);
+ dbg_remove_files(ci->dev);
device_unregister(&ci->gadget.dev);
/* my kobject is dynamic, I swear! */
memset(&ci->gadget, 0, sizeof(ci->gadget));
dev_dbg(&acm->control->dev, "%s\n", __func__);
- tty_unregister_device(acm_tty_driver, acm->minor);
acm_release_minor(acm);
usb_put_intf(acm->control);
kfree(acm->country_codes);
int num_rx_buf;
int i;
int combined_interfaces = 0;
+ struct device *tty_dev;
+ int rv = -ENOMEM;
/* normal quirks */
quirks = (unsigned long)id->driver_info;
usb_set_intfdata(data_interface, acm);
usb_get_intf(control_interface);
- tty_port_register_device(&acm->port, acm_tty_driver, minor,
+ tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor,
&control_interface->dev);
+ if (IS_ERR(tty_dev)) {
+ rv = PTR_ERR(tty_dev);
+ goto alloc_fail8;
+ }
return 0;
+alloc_fail8:
+ if (acm->country_codes) {
+ device_remove_file(&acm->control->dev,
+ &dev_attr_wCountryCodes);
+ device_remove_file(&acm->control->dev,
+ &dev_attr_iCountryCodeRelDate);
+ }
+ device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
alloc_fail7:
+ usb_set_intfdata(intf, NULL);
for (i = 0; i < ACM_NW; i++)
usb_free_urb(acm->wb[i].urb);
alloc_fail6:
acm_release_minor(acm);
kfree(acm);
alloc_fail:
- return -ENOMEM;
+ return rv;
}
static void stop_data_traffic(struct acm *acm)
stop_data_traffic(acm);
+ tty_unregister_device(acm_tty_driver, acm->minor);
+
usb_free_urb(acm->ctrlurb);
for (i = 0; i < ACM_NW; i++)
usb_free_urb(acm->wb[i].urb);
#define WDM_RESPONDING 7
#define WDM_SUSPENDING 8
#define WDM_RESETTING 9
+#define WDM_OVERFLOW 10
#define WDM_MAX 16
{
struct wdm_device *desc = urb->context;
int status = urb->status;
+ int length = urb->actual_length;
spin_lock(&desc->iuspin);
clear_bit(WDM_RESPONDING, &desc->flags);
}
desc->rerr = status;
- desc->reslength = urb->actual_length;
- memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
- desc->length += desc->reslength;
+ if (length + desc->length > desc->wMaxCommand) {
+ /* The buffer would overflow */
+ set_bit(WDM_OVERFLOW, &desc->flags);
+ } else {
+ /* we may already be in overflow */
+ if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+ memmove(desc->ubuf + desc->length, desc->inbuf, length);
+ desc->length += length;
+ desc->reslength = length;
+ }
+ }
skip_error:
wake_up(&desc->wait);
rv = -ENODEV;
goto err;
}
+ if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+ clear_bit(WDM_OVERFLOW, &desc->flags);
+ rv = -ENOBUFS;
+ goto err;
+ }
i++;
if (file->f_flags & O_NONBLOCK) {
if (!test_bit(WDM_READ, &desc->flags)) {
spin_unlock_irq(&desc->iuspin);
goto retry;
}
+
if (!desc->reslength) { /* zero length read */
dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
clear_bit(WDM_READ, &desc->flags);
struct wdm_device *desc = wdm_find_device(intf);
int rv;
+ clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);
mutex_unlock(&desc->wlock);
struct hc_driver *driver;
struct usb_hcd *hcd;
int retval;
+ int hcd_irq = 0;
if (usb_disabled())
return -ENODEV;
return -ENODEV;
dev->current_state = PCI_D0;
- /* The xHCI driver supports MSI and MSI-X,
- * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ /*
+ * The xHCI driver has its own irq management
+ * make sure irq setup is not touched for xhci in generic hcd code
*/
- if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
- dev_err(&dev->dev,
- "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
- pci_name(dev));
- retval = -ENODEV;
- goto disable_pci;
+ if ((driver->flags & HCD_MASK) != HCD_USB3) {
+ if (!dev->irq) {
+ dev_err(&dev->dev,
+ "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+ pci_name(dev));
+ retval = -ENODEV;
+ goto disable_pci;
+ }
+ hcd_irq = dev->irq;
}
hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
pci_set_master(dev);
- retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
if (retval != 0)
goto unmap_registers;
set_hs_companion(dev, hcd);
}
EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
+int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ if (!hcd->driver->find_raw_port_number)
+ return port1;
+
+ return hcd->driver->find_raw_port_number(hcd, port1);
+}
+
static int usb_hcd_request_irqs(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags)
{
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/pci.h>
+#include <linux/usb/hcd.h>
#include <acpi/acpi_bus.h>
#include "usb.h"
* connected to.
*/
if (!udev->parent) {
- *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev),
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ int raw_port_num;
+
+ raw_port_num = usb_hcd_find_raw_port_number(hcd,
port_num);
+ *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev),
+ raw_port_num);
if (!*handle)
return -ENODEV;
} else {
break;
}
+ dwc3_free_event_buffers(dwc);
dwc3_core_exit(dwc);
return 0;
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/of.h>
-#include "core.h"
-
struct dwc3_exynos {
struct platform_device *dwc3;
struct platform_device *usb2_phy;
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
-#include "core.h"
-
/*
* All these registers belong to OMAP's Wrapper around the
* DesignWare USB3 Core.
return 0;
}
-static const struct of_device_id of_dwc3_matach[] = {
+static const struct of_device_id of_dwc3_match[] = {
{
"ti,dwc3",
},
{ },
};
-MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
static struct platform_driver dwc3_omap_driver = {
.probe = dwc3_omap_probe,
.remove = dwc3_omap_remove,
.driver = {
.name = "omap-dwc3",
- .of_match_table = of_dwc3_matach,
+ .of_match_table = of_dwc3_match,
},
};
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
-#include "core.h"
-
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
DWC3_TRBCTL_CONTROL_DATA);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
- u32 transfer_size;
+ u32 transfer_size;
+ u32 maxpacket;
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
- transfer_size = roundup(req->request.length,
- (u32) dep->endpoint.maxpacket);
+ maxpacket = dep->endpoint.maxpacket;
+ transfer_size = roundup(req->request.length, maxpacket);
dwc->ep0_bounced = true;
static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
{
- struct dwc3_gadget_ep_cmd_params params;
struct dwc3_ep *dep;
int ret;
u32 reg;
dev_vdbg(dwc->dev, "%s\n", __func__);
- memset(¶ms, 0x00, sizeof(params));
-
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
tristate "LPC32XX USB Peripheral Controller"
depends on ARCH_LPC32XX
select USB_ISP1301
+ select USB_OTG_UTILS
help
This option selects the USB device controller in the LPC32xx SoC.
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
+# USB Functions
+obj-$(CONFIG_USB_F_ACM) += f_acm.o
+f_ss_lb-y := f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
+
#
# USB gadget drivers
#
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
-
-# USB Functions
-obj-$(CONFIG_USB_F_ACM) += f_acm.o
-f_ss_lb-y := f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
-obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
/**
* usb_composite_probe() - register a composite driver
* @driver: the driver to register
- * @bind: the callback used to allocate resources that are shared across the
- * whole device, such as string IDs, and add its configurations using
- * @usb_add_config(). This may fail by returning a negative errno
- * value; it should return zero on successful initialization.
+ *
* Context: single threaded during gadget setup
*
* This function is used to register drivers using the composite driver
static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
{
struct f_rndis *rndis = req->context;
- struct usb_composite_dev *cdev = rndis->port.func.config->cdev;
int status;
/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
// spin_lock(&dev->lock);
status = rndis_msg_parser(rndis->config, (u8 *) req->buf);
if (status < 0)
- ERROR(cdev, "RNDIS command error %d, %d/%d\n",
+ pr_err("RNDIS command error %d, %d/%d\n",
status, req->actual, req->length);
// spin_unlock(&dev->lock);
}
req->context = audio;
req->complete = f_audio_complete;
+ len = min_t(size_t, sizeof(value), len);
memcpy(req->buf, &value, len);
return len;
goto error;
gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id;
- for (i = func_num; --i; ) {
+ for (i = func_num; i--; ) {
ret = functionfs_bind(ffs_tab[i].ffs_data, cdev);
if (unlikely(ret < 0)) {
while (++i < func_num)
gether_cleanup();
gfs_ether_setup = false;
- for (i = func_num; --i; )
+ for (i = func_num; i--; )
if (ffs_tab[i].ffs_data)
functionfs_unbind(ffs_tab[i].ffs_data);
struct usb_gadget_driver *driver)
{
struct imx_udc_struct *imx_usb;
- int retval;
imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
/* first hook up the driver ... */
imx_usb->driver = driver;
imx_usb->gadget.dev.driver = &driver->driver;
- retval = device_add(&imx_usb->gadget.dev);
- if (retval)
- goto fail;
-
D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
__func__, driver->driver.name);
imx_udc_enable(imx_usb);
return 0;
-fail:
- imx_usb->driver = NULL;
- imx_usb->gadget.dev.driver = NULL;
- return retval;
}
static int imx_udc_stop(struct usb_gadget *gadget,
imx_usb->gadget.dev.driver = NULL;
imx_usb->driver = NULL;
- device_del(&imx_usb->gadget.dev);
-
D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
__func__, driver->driver.name);
imx_usb->gadget.dev.parent = &pdev->dev;
imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ ret = device_add(&imx_usb->gadget.dev);
+ if (retval)
+ goto fail4;
+
platform_set_drvdata(pdev, imx_usb);
usb_init_data(imx_usb);
ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
if (ret)
- goto fail4;
+ goto fail5;
return 0;
+fail5:
+ device_unregister(&imx_usb->gadget.dev);
fail4:
for (i = 0; i < IMX_USB_NB_EP + 1; i++)
free_irq(imx_usb->usbd_int[i], imx_usb);
int i;
usb_del_gadget_udc(&imx_usb->gadget);
+ device_unregister(&imx_usb->gadget.dev);
imx_udc_disable(imx_usb);
del_timer(&imx_usb->timer);
};
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-#ifdef CONFIG_USB_GADGET_NET2272_DMA
+#ifdef CONFIG_USB_NET2272_DMA
/*
* use_dma: the NET2272 can use an external DMA controller.
* Note that since there is no generic DMA api, some functions,
for (i = 0; i < 4; ++i)
net2272_dequeue_all(&dev->ep[i]);
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
net2272_usb_reinit(dev);
}
err_func:
device_remove_file (&dev->pdev->dev, &dev_attr_function);
err_unbind:
- driver->unbind (&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
return retval;
for (i = 0; i < 7; i++)
nuke (&dev->ep [i]);
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
usb_reinit (dev);
}
#define DRIVER_VERSION "4 October 2004"
#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_RX0 26
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
}
static int omap_udc_start(struct usb_gadget *g,
- struct usb_gadget_driver *driver)
+ struct usb_gadget_driver *driver);
static int omap_udc_stop(struct usb_gadget *g,
struct usb_gadget_driver *driver);
dev->gadget.dev.driver = &driver->driver;
dev->pullup = 1;
- retval = device_add (&dev->gadget.dev);
- if (retval) {
- dev->driver = NULL;
- dev->gadget.dev.driver = NULL;
- return retval;
- }
-
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
}
del_timer_sync(&dev->timer);
+ /* report disconnect; the driver is already quiesced */
+ if (driver)
+ driver->disconnect(&dev->gadget);
+
/* re-init driver-visible data structures */
udc_reinit(dev);
}
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
- device_del (&dev->gadget.dev);
dump_state(dev);
return 0;
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ retval = device_add(&dev->gadget.dev);
+ if (retval) {
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ goto err_device_add;
+ }
+
the_controller = dev;
platform_set_drvdata(pdev, dev);
free_irq(irq, dev);
#endif
err_irq1:
+ device_unregister(&dev->gadget.dev);
+ err_device_add:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
{
struct pxa25x_udc *dev = platform_get_drvdata(pdev);
- usb_del_gadget_udc(&dev->gadget);
if (dev->driver)
return -EBUSY;
+ usb_del_gadget_udc(&dev->gadget);
+ device_unregister(&dev->gadget.dev);
dev->pullup = 0;
pullup(dev);
udc->gadget.dev.driver = &driver->driver;
dplus_pullup(udc, 1);
- retval = device_add(&udc->gadget.dev);
- if (retval) {
- dev_err(udc->dev, "device_add error %d\n", retval);
- goto fail;
- }
if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
udc->driver = NULL;
- device_del(&udc->gadget.dev);
if (!IS_ERR_OR_NULL(udc->transceiver))
return otg_set_peripheral(udc->transceiver->otg, NULL);
driver_name, udc->irq, retval);
goto err_irq;
}
+
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(udc->dev, "device_add error %d\n", retval);
+ goto err_dev_add;
+ }
+
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
goto err_add_udc;
pxa_init_debugfs(udc);
+
return 0;
+
err_add_udc:
+ device_unregister(&udc->gadget.dev);
+err_dev_add:
free_irq(udc->irq, udc);
err_irq:
iounmap(udc->regs);
int gpio = udc->mach->gpio_pullup;
usb_del_gadget_udc(&udc->gadget);
+ device_del(&udc->gadget.dev);
usb_gadget_unregister_driver(udc->driver);
free_irq(udc->irq, udc);
pxa_cleanup_debugfs(udc);
static int s3c2410_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
- struct s3c2410_udc *udc = to_s3c2410(g)
- int retval;
+ struct s3c2410_udc *udc = to_s3c2410(g);
dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
- /* Bind the driver */
- retval = device_add(&udc->gadget.dev);
- if (retval) {
- dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
- goto register_error;
- }
-
/* Enable udc */
s3c2410_udc_enable(udc);
return 0;
-
-register_error:
- udc->driver = NULL;
- udc->gadget.dev.driver = NULL;
- return retval;
}
static int s3c2410_udc_stop(struct usb_gadget *g,
{
struct s3c2410_udc *udc = to_s3c2410(g);
- device_del(&udc->gadget.dev);
udc->driver = NULL;
/* Disable udc */
udc->gadget.dev.parent = &pdev->dev;
udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ /* Bind the driver */
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
+ goto err_device_add;
+ }
+
the_controller = udc;
platform_set_drvdata(pdev, udc);
err_int:
free_irq(IRQ_USBD, udc);
err_map:
+ device_unregister(&udc->gadget.dev);
+err_device_add:
iounmap(base_addr);
err_mem:
release_mem_region(rsrc_start, rsrc_len);
dev_dbg(&pdev->dev, "%s()\n", __func__);
- usb_del_gadget_udc(&udc->gadget);
if (udc->driver)
return -EBUSY;
+ usb_del_gadget_udc(&udc->gadget);
+ device_unregister(&udc->gadget.dev);
debugfs_remove(udc->regs_info);
if (udc_info && !udc_info->udc_command &&
pr_debug(fmt, ##arg)
#endif /* pr_vdebug */
#else
-#ifndef pr_vdebig
+#ifndef pr_vdebug
#define pr_vdebug(fmt, arg...) \
({ if (0) pr_debug(fmt, ##arg); })
#endif /* pr_vdebug */
snd = &card->playback;
snd->filp = filp_open(fn_play, O_WRONLY, 0);
if (IS_ERR(snd->filp)) {
+ int ret = PTR_ERR(snd->filp);
+
ERROR(card, "No such PCM playback device: %s\n", fn_play);
snd->filp = NULL;
+ return ret;
}
pcm_file = snd->filp->private_data;
snd->substream = pcm_file->substream;
usb_gadget_disconnect(udc->gadget);
udc->driver->disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
- usb_gadget_udc_stop(udc->gadget, udc->driver);
+ usb_gadget_udc_stop(udc->gadget, NULL);
udc->driver = NULL;
udc->dev.driver = NULL;
static void end_unlink_async(struct ehci_hcd *ehci);
static void unlink_empty_async(struct ehci_hcd *ehci);
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
static void ehci_work(struct ehci_hcd *ehci);
static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
/* guard against (alleged) silicon errata */
if (cmd & CMD_IAAD)
ehci_dbg(ehci, "IAA with IAAD still set?\n");
- if (ehci->async_iaa) {
+ if (ehci->async_iaa)
COUNT(ehci->stats.iaa);
- end_unlink_async(ehci);
- } else
- ehci_dbg(ehci, "IAA with nothing unlinked?\n");
+ end_unlink_async(ehci);
}
/* remote wakeup [4.3.1] */
ehci->rh_state = EHCI_RH_SUSPENDED;
end_unlink_async(ehci);
- unlink_empty_async(ehci);
+ unlink_empty_async_suspended(ehci);
ehci_handle_intr_unlinks(ehci);
end_free_itds(ehci);
* qtd is updated in qh_completions(). Update the QH
* overlay here.
*/
- if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+ if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
}
else if (last_status == -EINPROGRESS && !urb->unlinked)
continue;
- /* qh unlinked; token in overlay may be most current */
- if (state == QH_STATE_IDLE
- && cpu_to_hc32(ehci, qtd->qtd_dma)
- == hw->hw_current) {
+ /*
+ * If this was the active qtd when the qh was unlinked
+ * and the overlay's token is active, then the overlay
+ * hasn't been written back to the qtd yet so use its
+ * token instead of the qtd's. After the qtd is
+ * processed and removed, the overlay won't be valid
+ * any more.
+ */
+ if (state == QH_STATE_IDLE &&
+ qh->qtd_list.next == &qtd->qtd_list &&
+ (hw->hw_token & ACTIVE_BIT(ehci))) {
token = hc32_to_cpu(ehci, hw->hw_token);
+ hw->hw_token &= ~ACTIVE_BIT(ehci);
/* An unlink may leave an incomplete
* async transaction in the TT buffer.
struct ehci_qh *prev;
/* Add to the end of the list of QHs waiting for the next IAAD */
- qh->qh_state = QH_STATE_UNLINK;
+ qh->qh_state = QH_STATE_UNLINK_WAIT;
if (ehci->async_unlink)
ehci->async_unlink_last->unlink_next = qh;
else
/* Do only the first waiting QH (nVidia bug?) */
qh = ehci->async_unlink;
- ehci->async_iaa = qh;
- ehci->async_unlink = qh->unlink_next;
- qh->unlink_next = NULL;
+
+ /*
+ * Intel (?) bug: The HC can write back the overlay region
+ * even after the IAA interrupt occurs. In self-defense,
+ * always go through two IAA cycles for each QH.
+ */
+ if (qh->qh_state == QH_STATE_UNLINK_WAIT) {
+ qh->qh_state = QH_STATE_UNLINK;
+ } else {
+ ehci->async_iaa = qh;
+ ehci->async_unlink = qh->unlink_next;
+ qh->unlink_next = NULL;
+ }
/* Make sure the unlinks are all visible to the hardware */
wmb();
}
}
+/* The root hub is suspended; unlink all the async QHs */
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci)
+{
+ struct ehci_qh *qh;
+
+ while (ehci->async->qh_next.qh) {
+ qh = ehci->async->qh_next.qh;
+ WARN_ON(!list_empty(&qh->qtd_list));
+ single_unlink_async(ehci, qh);
+ }
+ start_iaa_cycle(ehci, false);
+}
+
/* makes sure the async qh will become idle */
/* caller must own ehci->lock */
memset (itd, 0, sizeof *itd);
itd->itd_dma = itd_dma;
+ itd->frame = 9999; /* an invalid value */
list_add (&itd->itd_list, &sched->td_list);
}
spin_unlock_irqrestore (&ehci->lock, flags);
memset (sitd, 0, sizeof *sitd);
sitd->sitd_dma = sitd_dma;
+ sitd->frame = 9999; /* an invalid value */
list_add (&sitd->sitd_list, &iso_sched->td_list);
}
* (a) SMP races against real IAA firing and retriggering, and
* (b) clean HC shutdown, when IAA watchdog was pending.
*/
- if (ehci->async_iaa) {
+ if (1) {
u32 cmd, status;
/* If we get here, IAA is *REALLY* late. It's barely
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/usb-exynos.h>
+#include <linux/platform_data/usb-ohci-exynos.h>
#include <linux/usb/phy.h>
#include <linux/usb/samsung_usb_phy.h>
+
#include <plat/usb-phy.h>
struct exynos_ohci_hcd {
* is attached to (or the roothub port its ancestor hub is attached to). All we
* know is the index of that port under either the USB 2.0 or the USB 3.0
* roothub, but that doesn't give us the real index into the HW port status
- * registers. Scan through the xHCI roothub port array, looking for the Nth
- * entry of the correct port speed. Return the port number of that entry.
+ * registers. Call xhci_find_raw_port_number() to get real index.
*/
static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
struct usb_device *udev)
{
struct usb_device *top_dev;
- unsigned int num_similar_speed_ports;
- unsigned int faked_port_num;
- int i;
+ struct usb_hcd *hcd;
+
+ if (udev->speed == USB_SPEED_SUPER)
+ hcd = xhci->shared_hcd;
+ else
+ hcd = xhci->main_hcd;
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- faked_port_num = top_dev->portnum;
- for (i = 0, num_similar_speed_ports = 0;
- i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
- u8 port_speed = xhci->port_array[i];
-
- /*
- * Skip ports that don't have known speeds, or have duplicate
- * Extended Capabilities port speed entries.
- */
- if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
- continue;
- /*
- * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
- * 1.1 ports are under the USB 2.0 hub. If the port speed
- * matches the device speed, it's a similar speed port.
- */
- if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
- num_similar_speed_ports++;
- if (num_similar_speed_ports == faked_port_num)
- /* Roothub ports are numbered from 1 to N */
- return i+1;
- }
- return 0;
+ return xhci_find_raw_port_number(hcd, top_dev->portnum);
}
/* Setup an xHCI virtual device for a Set Address command */
.set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
.enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout,
.disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
+ .find_raw_port_number = xhci_find_raw_port_number,
};
/*-------------------------------------------------------------------------*/
max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
if ((port_id <= 0) || (port_id > max_ports)) {
xhci_warn(xhci, "Invalid port id %d\n", port_id);
- bogus_port_status = true;
- goto cleanup;
+ inc_deq(xhci, xhci->event_ring);
+ return;
}
/* Figure out which usb_hcd this port is attached to:
* is it a USB 3.0 port or a USB 2.0/1.1 port?
*/
major_revision = xhci->port_array[port_id - 1];
+
+ /* Find the right roothub. */
+ hcd = xhci_to_hcd(xhci);
+ if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
+ hcd = xhci->shared_hcd;
+
if (major_revision == 0) {
xhci_warn(xhci, "Event for port %u not in "
"Extended Capabilities, ignoring.\n",
* into the index into the ports on the correct split roothub, and the
* correct bus_state structure.
*/
- /* Find the right roothub. */
- hcd = xhci_to_hcd(xhci);
- if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
- hcd = xhci->shared_hcd;
bus_state = &xhci->bus_state[hcd_index(hcd)];
if (hcd->speed == HCD_USB3)
port_array = xhci->usb3_ports;
if (event_trb != ep_ring->dequeue &&
event_trb != td->last_trb)
td->urb->actual_length =
- td->urb->transfer_buffer_length
- - TRB_LEN(le32_to_cpu(event->transfer_len));
+ td->urb->transfer_buffer_length -
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
else
td->urb->actual_length = 0;
/* Maybe the event was for the data stage? */
td->urb->actual_length =
td->urb->transfer_buffer_length -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
xhci_dbg(xhci, "Waiting for status "
"stage event\n");
return 0;
/* handle completion code */
switch (trb_comp_code) {
case COMP_SUCCESS:
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
frame->status = 0;
break;
}
len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
}
len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
if (trb_comp_code != COMP_STOP_INVAL) {
frame->actual_length = len;
case COMP_SUCCESS:
/* Double check that the HW transferred everything. */
if (event_trb != td->last_trb ||
- TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
xhci_warn(xhci, "WARN Successful completion "
"on short TX\n");
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
"%d bytes untransferred\n",
td->urb->ep->desc.bEndpointAddress,
td->urb->transfer_buffer_length,
- TRB_LEN(le32_to_cpu(event->transfer_len)));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
/* Fast path - was this the last TRB in the TD for this URB? */
if (event_trb == td->last_trb) {
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
td->urb->actual_length =
td->urb->transfer_buffer_length -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
if (td->urb->transfer_buffer_length <
td->urb->actual_length) {
xhci_warn(xhci, "HC gave bad length "
"of %d bytes left\n",
- TRB_LEN(le32_to_cpu(event->transfer_len)));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
td->urb->actual_length = 0;
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
*status = -EREMOTEIO;
if (trb_comp_code != COMP_STOP_INVAL)
td->urb->actual_length +=
TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
}
return finish_td(xhci, td, event_trb, event, ep, status, false);
* transfer type
*/
case COMP_SUCCESS:
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
break;
if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
trb_comp_code = COMP_SHORT_TX;
* TD list.
*/
if (list_empty(&ep_ring->td_list)) {
- xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
- "with no TDs queued?\n",
- TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
- ep_index);
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (le32_to_cpu(event->flags) &
- TRB_TYPE_BITMASK)>>10);
- xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ /*
+ * A stopped endpoint may generate an extra completion
+ * event if the device was suspended. Don't print
+ * warnings.
+ */
+ if (!(trb_comp_code == COMP_STOP ||
+ trb_comp_code == COMP_STOP_INVAL)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+ TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
+ ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (le32_to_cpu(event->flags) &
+ TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ }
if (ep->skip) {
ep->skip = false;
xhci_dbg(xhci, "td_list is empty while skip "
* generate interrupts. Don't even try to enable MSI.
*/
if (xhci->quirks & XHCI_BROKEN_MSI)
- return 0;
+ goto legacy_irq;
/* unregister the legacy interrupt */
if (hcd->irq)
return -EINVAL;
}
+ legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
return 0;
}
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ __le32 __iomem *base_addr = &xhci->op_regs->port_status_base;
+ __le32 __iomem *addr;
+ int raw_port;
+
+ if (hcd->speed != HCD_USB3)
+ addr = xhci->usb2_ports[port1 - 1];
+ else
+ addr = xhci->usb3_ports[port1 - 1];
+
+ raw_port = (addr - base_addr)/NUM_PORT_REGS + 1;
+ return raw_port;
+}
+
#ifdef CONFIG_USB_SUSPEND
/* BESL to HIRD Encoding array for USB2 LPM */
/* bits 12:31 are reserved (and should be preserved on writes). */
/* IMAN - Interrupt Management Register */
-#define IMAN_IP (1 << 1)
-#define IMAN_IE (1 << 0)
+#define IMAN_IE (1 << 1)
+#define IMAN_IP (1 << 0)
/* USBSTS - USB status - status bitmasks */
/* HC not running - set to 1 when run/stop bit is cleared. */
__le32 flags;
};
+/* Transfer event TRB length bit mask */
+/* bits 0:23 */
+#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
+
/** Transfer Event bit fields **/
#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
#ifdef CONFIG_PM
int xhci_bus_suspend(struct usb_hcd *hcd);
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on USB && USB_GADGET
- select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
- select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
- select TWL4030_USB if MACH_OMAP_3430SDP
- select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
- select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
select USB_OTG_UTILS
help
Say Y here if your system has a dual role high speed USB
u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
int err;
- err = musb->int_usb & USB_INTR_VBUSERROR;
+ err = musb->int_usb & MUSB_INTR_VBUSERROR;
if (err) {
/*
* The Mentor core doesn't debounce VBUS as needed
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_SYSFS
-
static ssize_t
musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
.attrs = musb_attributes,
};
-#endif /* sysfs */
-
/* Only used to provide driver mode change events */
static void musb_irq_work(struct work_struct *data)
{
if (status < 0)
goto fail4;
-#ifdef CONFIG_SYSFS
status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
if (status)
goto fail5;
-#endif
pm_runtime_put(musb->controller);
static inline void unmap_dma_buffer(struct musb_request *request,
struct musb *musb)
{
- if (!is_buffer_mapped(request))
+ struct musb_ep *musb_ep = request->ep;
+
+ if (!is_buffer_mapped(request) || !musb_ep->dma)
return;
if (request->request.dma == DMA_ADDR_INVALID) {
ep->busy = 1;
spin_unlock(&musb->lock);
- unmap_dma_buffer(req, musb);
+
+ if (!dma_mapping_error(&musb->g.dev, request->dma))
+ unmap_dma_buffer(req, musb);
+
if (request->status == 0)
dev_dbg(musb->controller, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
-struct omap2430_glue *_glue;
+static struct omap2430_glue *_glue;
static struct timer_list musb_idle_timer;
{
struct omap2430_glue *glue = _glue;
- if (glue && glue_to_musb(glue)) {
- glue->status = status;
- } else {
+ if (!glue) {
+ pr_err("%s: musb core is not yet initialized\n", __func__);
+ return;
+ }
+ glue->status = status;
+
+ if (!glue_to_musb(glue)) {
pr_err("%s: musb core is not yet ready\n", __func__);
return;
}
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy(&phy_list, type);
- if (IS_ERR(phy)) {
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver of type %s\n",
usb_phy_type_string(type));
goto err0;
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
- if (IS_ERR(phy)) {
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver\n");
goto err0;
}
*/
void usb_put_phy(struct usb_phy *x)
{
- if (x)
+ if (x) {
+ struct module *owner = x->dev->driver->owner;
+
put_device(x->dev);
+ module_put(owner);
+ }
}
EXPORT_SYMBOL(usb_put_phy);
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
depends on I2C
+ select USB_OTG_UTILS
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"control_dev_conf");
- control_usb->dev_conf = devm_request_and_ioremap(&pdev->dev, res);
- if (!control_usb->dev_conf) {
- dev_err(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_usb->dev_conf))
+ return PTR_ERR(control_usb->dev_conf);
if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"otghs_control");
- control_usb->otghs_control = devm_request_and_ioremap(
+ control_usb->otghs_control = devm_ioremap_resource(
&pdev->dev, res);
- if (!control_usb->otghs_control) {
- dev_err(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ if (IS_ERR(control_usb->otghs_control))
+ return PTR_ERR(control_usb->otghs_control);
}
if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"phy_power_usb");
- control_usb->phy_power = devm_request_and_ioremap(
+ control_usb->phy_power = devm_ioremap_resource(
&pdev->dev, res);
- if (!control_usb->phy_power) {
- dev_dbg(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ if (IS_ERR(control_usb->phy_power))
+ return PTR_ERR(control_usb->phy_power);
control_usb->sys_clk = devm_clk_get(control_usb->dev,
"sys_clkin");
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl");
- phy->pll_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!phy->pll_ctrl_base) {
- dev_err(&pdev->dev, "ioremap of pll_ctrl failed\n");
- return -ENOMEM;
- }
+ phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->pll_ctrl_base))
+ return PTR_ERR(phy->pll_ctrl_base);
phy->dev = &pdev->dev;
return -ENODEV;
}
- phy_base = devm_request_and_ioremap(dev, phy_mem);
- if (!phy_base) {
- dev_err(dev, "%s: register mapping failed\n", __func__);
- return -ENXIO;
- }
+ phy_base = devm_ioremap_resource(dev, phy_mem);
+ if (IS_ERR(phy_base))
+ return PTR_ERR(phy_base);
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
if (!sphy)
}
struct ark3116_private {
- wait_queue_head_t delta_msr_wait;
struct async_icount icount;
int irda; /* 1 for irda device */
if (!priv)
return -ENOMEM;
- init_waitqueue_head(&priv->delta_msr_wait);
mutex_init(&priv->hw_lock);
spin_lock_init(&priv->status_lock);
case TIOCMIWAIT:
for (;;) {
struct async_icount prev = priv->icount;
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
if ((prev.rng == priv->icount.rng) &&
(prev.dsr == priv->icount.dsr) &&
(prev.dcd == priv->icount.dcd) &&
priv->icount.dcd++;
if (msr & UART_MSR_TERI)
priv->icount.rng++;
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
}
struct ch341_private {
spinlock_t lock; /* access lock */
- wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
unsigned baud_rate; /* set baud rate */
u8 line_control; /* set line control value RTS/DTR */
u8 line_status; /* active status of modem control inputs */
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
priv->baud_rate = DEFAULT_BAUD_RATE;
priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
spin_unlock_irqrestore(&priv->lock, flags);
ch341_set_handshake(port->serial->dev, priv->line_control);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
static void ch341_close(struct usb_serial_port *port)
tty_kref_put(tty);
}
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
exit:
spin_unlock_irqrestore(&priv->lock, flags);
while (!multi_change) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
multi_change = priv->multi_status_change;
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+ { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+ { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+ { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
int baud_rate; /* stores current baud rate in
integer form */
int isthrottled; /* if throttled, discard reads */
- wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the argument sent to
cypress_set_termios old_termios */
kfree(priv);
return -ENOMEM;
}
- init_waitqueue_head(&priv->delta_msr_wait);
usb_reset_configuration(serial->dev);
switch (cmd) {
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
- while (priv != NULL) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ for (;;) {
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
- else {
+
+ if (port->serial->disconnected)
+ return -EIO;
+
+ {
char diff = priv->diff_status;
if (diff == 0)
return -EIO; /* no change => error */
if (priv->current_status != priv->prev_status) {
priv->diff_status |= priv->current_status ^
priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
priv->prev_status = priv->current_status;
}
spin_unlock_irqrestore(&priv->lock, flags);
struct f81232_private {
spinlock_t lock;
- wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
};
line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
if (!urb->actual_length)
return;
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(port, priv);
int flags; /* some ASYNC_xxxx flags are supported */
unsigned long last_dtr_rts; /* saved modem control outputs */
struct async_icount icount;
- wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
char prev_status; /* Used for TIOCMIWAIT */
- bool dev_gone; /* Used to abort TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
+ { USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
kref_init(&priv->kref);
mutex_init(&priv->cfg_lock);
- init_waitqueue_head(&priv->delta_msr_wait);
priv->flags = ASYNC_LOW_LATENCY;
- priv->dev_gone = false;
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- priv->dev_gone = true;
- wake_up_interruptible_all(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
remove_sysfs_attrs(port);
if (diff_status & FTDI_RS0_RLSD)
priv->icount.dcd++;
- wake_up_interruptible_all(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
priv->prev_status = status;
}
*/
case TIOCMIWAIT:
cprev = priv->icount;
- while (!priv->dev_gone) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ for (;;) {
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = priv->icount;
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
}
cprev = cnow;
}
- return -EIO;
- break;
case TIOCSERGETLSR:
return get_lsr_info(port, (struct serial_struct __user *)arg);
break;
#define CONTEC_VID 0x06CE /* Vendor ID */
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
+/*
+ * Mitsubishi Electric Corp. (http://www.meau.com)
+ * Submitted by Konstantin Holoborodko
+ */
+#define MITSUBISHI_VID 0x06D3
+#define MITSUBISHI_FXUSB_PID 0x0284 /* USB/RS422 converters: FX-USB-AW/-BD */
+
/*
* Definitions for B&B Electronics products.
*/
if (!serial)
return;
- mutex_lock(&port->serial->disc_mutex);
-
- if (!port->serial->disconnected)
- garmin_clear(garmin_data_p);
+ garmin_clear(garmin_data_p);
/* shutdown our urbs */
usb_kill_urb(port->read_urb);
/* keep reset state so we know that we must start a new session */
if (garmin_data_p->state != STATE_RESET)
garmin_data_p->state = STATE_DISCONNECTED;
-
- mutex_unlock(&port->serial->disc_mutex);
}
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */
wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
struct async_icount icount;
struct usb_serial_port *port; /* loop back to the owner of this object */
/* initialize our wait queues */
init_waitqueue_head(&edge_port->wait_open);
init_waitqueue_head(&edge_port->wait_chase);
- init_waitqueue_head(&edge_port->delta_msr_wait);
init_waitqueue_head(&edge_port->wait_command);
/* initialize our icount structure */
dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number);
cprev = edge_port->icount;
while (1) {
- prepare_to_wait(&edge_port->delta_msr_wait,
+ prepare_to_wait(&port->delta_msr_wait,
&wait, TASK_INTERRUPTIBLE);
schedule();
- finish_wait(&edge_port->delta_msr_wait, &wait);
+ finish_wait(&port->delta_msr_wait, &wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = edge_port->icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
icount->dcd++;
if (newMsr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&edge_port->delta_msr_wait);
+ wake_up_interruptible(&edge_port->port->delta_msr_wait);
}
/* Save the new modem status */
int close_pending;
int lsr_event;
struct async_icount icount;
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while
- waiting for msr change to
- happen */
struct edgeport_serial *edge_serial;
struct usb_serial_port *port;
__u8 bUartMode; /* Port type, 0: RS232, etc. */
icount->dcd++;
if (msr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&edge_port->delta_msr_wait);
+ wake_up_interruptible(&edge_port->port->delta_msr_wait);
}
/* Save the new modem status */
dev = port->serial->dev;
memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
- init_waitqueue_head(&edge_port->delta_msr_wait);
/* turn off loopback */
status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
cprev = edge_port->icount;
while (1) {
- interruptible_sleep_on(&edge_port->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = edge_port->icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
unsigned char last_msr; /* Modem Status Register */
unsigned int rx_flags; /* Throttling flags */
struct async_icount icount;
- wait_queue_head_t msr_wait; /* for handling sleeping while waiting
- for msr change to happen */
};
#define THROTTLED 0x01
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->msr_wait);
usb_set_serial_port_data(port, priv);
tty_kref_put(tty);
}
#endif
- wake_up_interruptible(&priv->msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
spin_unlock_irqrestore(&priv->lock, flags);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
cprev = mct_u232_port->icount;
spin_unlock_irqrestore(&mct_u232_port->lock, flags);
for ( ; ; ) {
- prepare_to_wait(&mct_u232_port->msr_wait,
+ prepare_to_wait(&port->delta_msr_wait,
&wait, TASK_INTERRUPTIBLE);
schedule();
- finish_wait(&mct_u232_port->msr_wait, &wait);
+ finish_wait(&port->delta_msr_wait, &wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&mct_u232_port->lock, flags);
cnow = mct_u232_port->icount;
spin_unlock_irqrestore(&mct_u232_port->lock, flags);
char open;
char open_ports;
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
int delta_msr_cond;
struct async_icount icount;
struct usb_serial_port *port; /* loop back to the owner of this object */
icount->rng++;
smp_wmb();
}
+
+ mos7840_port->delta_msr_cond = 1;
+ wake_up_interruptible(&port->port->delta_msr_wait);
}
}
/* initialize our wait queues */
init_waitqueue_head(&mos7840_port->wait_chase);
- init_waitqueue_head(&mos7840_port->delta_msr_wait);
/* initialize our icount structure */
memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
mos7840_port->read_urb_busy = false;
}
}
- wake_up(&mos7840_port->delta_msr_wait);
- mos7840_port->delta_msr_cond = 1;
dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,
mos7840_port->shadowLCR);
}
while (1) {
/* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
mos7840_port->delta_msr_cond = 0;
- wait_event_interruptible(mos7840_port->delta_msr_wait,
- (mos7840_port->
+ wait_event_interruptible(port->delta_msr_wait,
+ (port->serial->disconnected ||
+ mos7840_port->
delta_msr_cond == 1));
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = mos7840_port->icount;
smp_rmb();
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
+#define CINTERION_PRODUCT_AH6 0x0055
+#define CINTERION_PRODUCT_PLS8 0x0060
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
u8 setup_done;
struct delayed_work delayed_setup_work;
- wait_queue_head_t intr_wait;
struct usb_serial_port *port; /* USB port with which associated */
};
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->intr_wait);
priv->port = port;
INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- wait_event_interruptible(priv->intr_wait,
+ wait_event_interruptible(port->delta_msr_wait,
+ port->serial->disconnected ||
priv->status.pin_state != prev);
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->status.pin_state & PIN_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
if (!priv->transient) {
if (xs->pin_state != priv->status.pin_state)
- wake_up_interruptible(&priv->intr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
}
struct pl2303_private {
spinlock_t lock;
- wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
};
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(port, priv);
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->line_status & UART_BREAK_ERROR)
usb_serial_handle_break(port);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
tty = tty_port_tty_get(&port->port);
if (!tty)
line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
if (!urb->actual_length)
return;
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
if (is_gobi1k) {
/* Gobi 1K USB layout:
- * 0: serial port (doesn't respond)
+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
* 1: serial port (doesn't respond)
* 2: AT-capable modem port
* 3: QMI/net
*/
- if (ifnum == 2)
+ if (ifnum == 0) {
+ dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+ altsetting = 1;
+ } else if (ifnum == 2)
dev_dbg(dev, "Modem port found\n");
else
altsetting = -1;
u8 shadowLSR;
u8 shadowMSR;
- wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
struct async_icount icount;
struct usb_serial_port *port;
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- wait_event_interruptible(priv->delta_msr_wait,
- ((priv->icount.rng != prev.rng) ||
+ wait_event_interruptible(port->delta_msr_wait,
+ (port->serial->disconnected ||
+ (priv->icount.rng != prev.rng) ||
(priv->icount.dsr != prev.dsr) ||
(priv->icount.dcd != prev.dcd) ||
(priv->icount.cts != prev.cts)));
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
cur = priv->icount;
spin_unlock_irqrestore(&priv->lock, flags);
__func__);
break;
}
- tty_flip_buffer_push(&port->port);
+
+ if (port_priv->is_open)
+ tty_flip_buffer_push(&port->port);
newport = *(ch + 3);
tty_insert_flip_string(&port->port, ch, 1);
}
- tty_flip_buffer_push(&port->port);
+ if (port_priv->is_open)
+ tty_flip_buffer_push(&port->port);
}
static void qt2_write_bulk_callback(struct urb *urb)
spin_lock_init(&port_priv->lock);
spin_lock_init(&port_priv->urb_lock);
- init_waitqueue_head(&port_priv->delta_msr_wait);
port_priv->port = port;
port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
if (newMSR & UART_MSR_TERI)
port_priv->icount.rng++;
- wake_up_interruptible(&port_priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
}
struct spcp8x5_private {
spinlock_t lock;
enum spcp8x5_type type;
- wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
};
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
priv->type = type;
usb_set_serial_port_data(port , priv);
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
/* wake up the wait for termios */
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
if (!urb->actual_length)
return;
while (1) {
/* wake up in bulk read */
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
spinlock_t status_lock;
u8 shadowLSR;
u8 shadowMSR;
- wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
struct async_icount icount;
};
spin_unlock_irqrestore(&priv->status_lock, flags);
while (1) {
- wait_event_interruptible(priv->delta_msr_wait,
- ((priv->icount.rng != prev.rng) ||
+ wait_event_interruptible(port->delta_msr_wait,
+ (port->serial->disconnected ||
+ (priv->icount.rng != prev.rng) ||
(priv->icount.dsr != prev.dsr) ||
(priv->icount.dcd != prev.dcd) ||
(priv->icount.cts != prev.cts)));
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->status_lock, flags);
cur = priv->icount;
spin_unlock_irqrestore(&priv->status_lock, flags);
return -ENOMEM;
spin_lock_init(&priv->status_lock);
- init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(port, priv);
priv->icount.dcd++;
if (msr & UART_MSR_TERI)
priv->icount.rng++;
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
}
int tp_flags;
int tp_closing_wait;/* in .01 secs */
struct async_icount tp_icount;
- wait_queue_head_t tp_msr_wait; /* wait for msr change */
wait_queue_head_t tp_write_wait;
struct ti_device *tp_tdev;
struct usb_serial_port *tp_port;
else
tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
tport->tp_closing_wait = closing_wait;
- init_waitqueue_head(&tport->tp_msr_wait);
init_waitqueue_head(&tport->tp_write_wait);
if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
kfree(tport);
dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
cprev = tport->tp_icount;
while (1) {
- interruptible_sleep_on(&tport->tp_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = tport->tp_icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
icount->dcd++;
if (msr & TI_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&tport->tp_msr_wait);
+ wake_up_interruptible(&tport->tp_port->delta_msr_wait);
spin_unlock_irqrestore(&tport->tp_lock, flags);
}
}
}
+ usb_put_intf(serial->interface);
usb_put_dev(serial->dev);
kfree(serial);
}
}
serial->dev = usb_get_dev(dev);
serial->type = driver;
- serial->interface = interface;
+ serial->interface = usb_get_intf(interface);
kref_init(&serial->kref);
mutex_init(&serial->disc_mutex);
serial->minor = SERIAL_TTY_NO_MINOR;
port->port.ops = &serial_port_ops;
port->serial = serial;
spin_lock_init(&port->lock);
+ init_waitqueue_head(&port->delta_msr_wait);
/* Keep this for private driver use for the moment but
should probably go away */
INIT_WORK(&port->work, usb_serial_port_work);
return 0;
}
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
- int result = 0;
- int act_len = 0;
- struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
- char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcbw->Tag = 0;
- bcbw->DataTransferLength = 0;
- bcbw->Flags = bcbw->Lun = 0;
- bcbw->Length = sizeof(rewind_cmd);
- memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
- memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
- US_BULK_CB_WRAP_LEN, &act_len);
- US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
- return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
- struct usb_interface_descriptor *idesc;
- int idProduct;
-
- idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
- /* The first port is CDROM,
- * means the dongle in the single port mode,
- * and a switch command is required to be sent. */
- if (idesc && idesc->bInterfaceNumber == 0) {
- if ((idProduct == 0x1001)
- || (idProduct == 0x1003)
- || (idProduct == 0x1004)
- || (idProduct >= 0x1401 && idProduct <= 0x1500)
- || (idProduct >= 0x1505 && idProduct <= 0x1600)
- || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
- return 1;
- }
- }
- return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
- int result = 0;
-
- if (usb_stor_huawei_dongles_pid(us)) {
- if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
- result = usb_stor_huawei_scsi_init(us);
- else
- result = usb_stor_huawei_feature_init(us);
- }
- return result;
-}
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
* as opposed to devices that do something strangely or wrongly.
*/
+/* In-kernel mode switching is deprecated. Do not add new devices to
+ * this list for the sole purpose of switching them to a different
+ * mode. Existing userspace solutions are superior.
+ *
+ * New mode switching devices should instead be added to the database
+ * maintained at http://www.draisberghof.de/usb_modeswitch/
+ */
+
#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
#define NO_SDDR09
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+/* Added by Dmitry Artamonow <mad_soft@inbox.ru> */
+UNUSUAL_DEV( 0x04e8, 0x5136, 0x0000, 0x9999,
+ "Samsung",
+ "YP-Z3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
#include <linux/pci.h>
#include <linux/uaccess.h>
#include <linux/vfio.h>
+#include <linux/slab.h>
#include "vfio_pci_private.h"
#include <linux/vfio.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include "vfio_pci_private.h"
msg.msg_controllen = 0;
ubufs = NULL;
} else {
- struct ubuf_info *ubuf = &vq->ubuf_info[head];
+ struct ubuf_info *ubuf;
+ ubuf = vq->ubuf_info + vq->upend_idx;
vq->heads[vq->upend_idx].len =
VHOST_DMA_IN_PROGRESS;
VHOST_SCSI_VQ_IO = 2,
};
+/*
+ * VIRTIO_RING_F_EVENT_IDX seems broken. Not sure the bug is in
+ * kernel but disabling it helps.
+ * TODO: debug and remove the workaround.
+ */
+enum {
+ VHOST_SCSI_FEATURES = VHOST_FEATURES & (~VIRTIO_RING_F_EVENT_IDX)
+};
+
#define VHOST_SCSI_MAX_TARGET 256
#define VHOST_SCSI_MAX_VQ 128
for (index = 0; index < vs->dev.nvqs; ++index) {
if (!vhost_vq_access_ok(&vs->vqs[index])) {
ret = -EFAULT;
- goto err;
+ goto err_dev;
}
}
for (i = 0; i < VHOST_SCSI_MAX_TARGET; i++) {
if (!tv_tpg)
continue;
+ mutex_lock(&tv_tpg->tv_tpg_mutex);
tv_tport = tv_tpg->tport;
if (!tv_tport) {
ret = -ENODEV;
- goto err;
+ goto err_tpg;
}
if (strcmp(tv_tport->tport_name, t->vhost_wwpn)) {
tv_tport->tport_name, tv_tpg->tport_tpgt,
t->vhost_wwpn, t->vhost_tpgt);
ret = -EINVAL;
- goto err;
+ goto err_tpg;
}
tv_tpg->tv_tpg_vhost_count--;
vs->vs_tpg[target] = NULL;
vs->vs_endpoint = false;
+ mutex_unlock(&tv_tpg->tv_tpg_mutex);
}
mutex_unlock(&vs->dev.mutex);
return 0;
-err:
+err_tpg:
+ mutex_unlock(&tv_tpg->tv_tpg_mutex);
+err_dev:
mutex_unlock(&vs->dev.mutex);
return ret;
}
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++)
vhost_scsi_flush_vq(vs, i);
+ vhost_work_flush(&vs->dev, &vs->vs_completion_work);
}
static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features)
{
- if (features & ~VHOST_FEATURES)
+ if (features & ~VHOST_SCSI_FEATURES)
return -EOPNOTSUPP;
mutex_lock(&vs->dev.mutex);
return -EFAULT;
return 0;
case VHOST_GET_FEATURES:
- features = VHOST_FEATURES;
+ features = VHOST_SCSI_FEATURES;
if (copy_to_user(featurep, &features, sizeof features))
return -EFAULT;
return 0;
= var->bits_per_pixel;
break;
case 16:
+ /* Older SOCs use IBGR:555 rather than BGR:565. */
+ if (sinfo->have_intensity_bit)
+ var->green.length = 5;
+ else
+ var->green.length = 6;
+
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:565 mode */
- var->red.offset = 11;
+ /* RGB:5X5 mode */
+ var->red.offset = var->green.length + 5;
var->blue.offset = 0;
} else {
- /* BGR:565 mode */
+ /* BGR:5X5 mode */
var->red.offset = 0;
- var->blue.offset = 11;
+ var->blue.offset = var->green.length + 5;
}
var->green.offset = 5;
- var->green.length = 6;
var->red.length = var->blue.length = 5;
break;
case 32:
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()) {
+ if (sinfo->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
}
sinfo->info = info;
sinfo->pdev = pdev;
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
+ cpu_is_at91sam9rl()) {
+ sinfo->have_intensity_bit = true;
+ }
strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/fb.h>
+#include <linux/io.h>
#include <linux/platform_data/video-ep93xx.h>
unsigned dotclk_delay;
const struct mxsfb_devdata *devdata;
int mapped;
+ u32 sync;
};
#define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT)
+ if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT)
+ if (host->sync & MXSFB_SYNC_DOTCLK_FAILING_ACT)
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING;
writel(vdctrl0, host->base + LCDC_VDCTRL0);
INIT_LIST_HEAD(&fb_info->modelist);
+ host->sync = pdata->sync;
+
ret = mxsfb_init_fbinfo(host);
if (ret != 0)
goto error_init_fb;
#include <linux/lcd.h>
#include <linux/gpio.h>
+#include <mach/hardware.h>
#include <mach/board-ams-delta.h>
#include "omapfb.h"
#include <linux/platform_device.h>
#include <asm/gpio.h>
+
+#include <mach/hardware.h>
#include <mach/mux.h>
+
#include "omapfb.h"
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
#include <linux/omap-dma.h>
+#include <mach/hardware.h>
+
#include "omapfb.h"
#include "lcdc.h"
u32 power_on_resume:1;
};
+/* used to pass spi_device from SPI to DSS portion of the driver */
+static struct tpo_td043_device *g_tpo_td043;
+
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
{
struct spi_message m;
static int tpo_td043_probe(struct omap_dss_device *dssdev)
{
- struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+ struct tpo_td043_device *tpo_td043 = g_tpo_td043;
int nreset_gpio = dssdev->reset_gpio;
int ret = 0;
if (ret)
dev_warn(&dssdev->dev, "failed to create sysfs files\n");
+ dev_set_drvdata(&dssdev->dev, tpo_td043);
+
return 0;
fail_gpio_req:
return -ENODEV;
}
+ if (g_tpo_td043 != NULL)
+ return -EBUSY;
+
spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
tpo_td043->spi = spi;
tpo_td043->nreset_gpio = dssdev->reset_gpio;
dev_set_drvdata(&spi->dev, tpo_td043);
- dev_set_drvdata(&dssdev->dev, tpo_td043);
+ g_tpo_td043 = tpo_td043;
omap_dss_register_driver(&tpo_td043_driver);
omap_dss_unregister_driver(&tpo_td043_driver);
kfree(tpo_td043);
+ g_tpo_td043 = NULL;
return 0;
}
static const enum omap_dss_output_id omap4_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
- OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
- OMAP_DSS_OUTPUT_DSI1,
+ OMAP_DSS_OUTPUT_DBI | OMAP_DSS_OUTPUT_DSI1,
/* OMAP_DSS_CHANNEL_DIGIT */
- OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI |
- OMAP_DSS_OUTPUT_DPI,
+ OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
return gpio_get_value(pdata->pin) ? 1 : 0;
}
+#if defined(CONFIG_OF)
static struct of_device_id w1_gpio_dt_ids[] = {
{ .compatible = "w1-gpio" },
{}
};
MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
+#endif
static int w1_gpio_probe_dt(struct platform_device *pdev)
{
return err;
}
-static int __exit w1_gpio_remove(struct platform_device *pdev)
+static int w1_gpio_remove(struct platform_device *pdev)
{
struct w1_bus_master *master = platform_get_drvdata(pdev);
struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
.of_match_table = of_match_ptr(w1_gpio_dt_ids),
},
.probe = w1_gpio_probe,
- .remove = __exit_p(w1_gpio_remove),
+ .remove = w1_gpio_remove,
.suspend = w1_gpio_suspend,
.resume = w1_gpio_resume,
};
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);
- if (kthread_should_stop()) {
+ /* ensure we're called from kthread and not by netlink callback */
+ if (!dev->priv && kthread_should_stop()) {
mutex_unlock(&dev->bus_mutex);
dev_dbg(&dev->dev, "Abort w1_search\n");
return;
#include "sp5100_tco.h"
/* Module and version information */
-#define TCO_VERSION "0.03"
+#define TCO_VERSION "0.05"
#define TCO_MODULE_NAME "SP5100 TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
/* internal variables */
static u32 tcobase_phys;
-static u32 resbase_phys;
static u32 tco_wdt_fired;
static void __iomem *tcobase;
static unsigned int pm_iobase;
static unsigned long timer_alive;
static char tco_expect_close;
static struct pci_dev *sp5100_tco_pci;
-static struct resource wdt_res = {
- .name = "Watchdog Timer",
- .flags = IORESOURCE_MEM,
-};
/* the watchdog platform device */
static struct platform_device *sp5100_tco_platform_device;
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
" (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-static unsigned int force_addr;
-module_param(force_addr, uint, 0);
-MODULE_PARM_DESC(force_addr, "Force the use of specified MMIO address."
- " ONLY USE THIS PARAMETER IF YOU REALLY KNOW"
- " WHAT YOU ARE DOING (default=none)");
-
/*
* Some TCO specific functions
*/
}
}
-static void tco_timer_disable(void)
-{
- int val;
-
- if (sp5100_tco_pci->revision >= 0x40) {
- /* For SB800 or later */
- /* Enable watchdog decode bit and Disable watchdog timer */
- outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
- val = inb(SB800_IO_PM_DATA_REG);
- val |= SB800_PCI_WATCHDOG_DECODE_EN;
- val |= SB800_PM_WATCHDOG_DISABLE;
- outb(val, SB800_IO_PM_DATA_REG);
- } else {
- /* For SP5100 or SB7x0 */
- /* Enable watchdog decode bit */
- pci_read_config_dword(sp5100_tco_pci,
- SP5100_PCI_WATCHDOG_MISC_REG,
- &val);
-
- val |= SP5100_PCI_WATCHDOG_DECODE_EN;
-
- pci_write_config_dword(sp5100_tco_pci,
- SP5100_PCI_WATCHDOG_MISC_REG,
- val);
-
- /* Disable Watchdog timer */
- outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
- val = inb(SP5100_IO_PM_DATA_REG);
- val |= SP5100_PM_WATCHDOG_DISABLE;
- outb(val, SP5100_IO_PM_DATA_REG);
- }
-}
-
/*
* /dev/watchdog handling
*/
{
struct pci_dev *dev = NULL;
const char *dev_name = NULL;
- u32 val, tmp_val;
+ u32 val;
u32 index_reg, data_reg, base_addr;
/* Match the PCI device */
} else
pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
- /*
- * Lastly re-programming the watchdog timer MMIO address,
- * This method is a last resort...
- *
- * Before re-programming, to ensure that the watchdog timer
- * is disabled, disable the watchdog timer.
- */
- tco_timer_disable();
-
- if (force_addr) {
- /*
- * Force the use of watchdog timer MMIO address, and aligned to
- * 8byte boundary.
- */
- force_addr &= ~0x7;
- val = force_addr;
-
- pr_info("Force the use of 0x%04x as MMIO address\n", val);
- } else {
- /*
- * Get empty slot into the resource tree for watchdog timer.
- */
- if (allocate_resource(&iomem_resource,
- &wdt_res,
- SP5100_WDT_MEM_MAP_SIZE,
- 0xf0000000,
- 0xfffffff8,
- 0x8,
- NULL,
- NULL)) {
- pr_err("MMIO allocation failed\n");
- goto unreg_region;
- }
-
- val = resbase_phys = wdt_res.start;
- pr_debug("Got 0x%04x from resource tree\n", val);
- }
-
- /* Restore to the low three bits */
- outb(base_addr+0, index_reg);
- tmp_val = val | (inb(data_reg) & 0x7);
-
- /* Re-programming the watchdog timer base address */
- outb(base_addr+0, index_reg);
- outb((tmp_val >> 0) & 0xff, data_reg);
- outb(base_addr+1, index_reg);
- outb((tmp_val >> 8) & 0xff, data_reg);
- outb(base_addr+2, index_reg);
- outb((tmp_val >> 16) & 0xff, data_reg);
- outb(base_addr+3, index_reg);
- outb((tmp_val >> 24) & 0xff, data_reg);
-
- if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
- dev_name)) {
- pr_err("MMIO address 0x%04x already in use\n", val);
- goto unreg_resource;
- }
+ pr_notice("failed to find MMIO address, giving up.\n");
+ goto unreg_region;
setup_wdt:
tcobase_phys = val;
unreg_mem_region:
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-unreg_resource:
- if (resbase_phys)
- release_resource(&wdt_res);
unreg_region:
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
exit:
static int sp5100_tco_init(struct platform_device *dev)
{
int ret;
- char addr_str[16];
/*
* Check whether or not the hardware watchdog is there. If found, then
clear_bit(0, &timer_alive);
/* Show module parameters */
- if (force_addr == tcobase_phys)
- /* The force_addr is vaild */
- sprintf(addr_str, "0x%04x", force_addr);
- else
- strcpy(addr_str, "none");
-
- pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d, "
- "force_addr=%s)\n",
- tcobase, heartbeat, nowayout, addr_str);
+ pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+ tcobase, heartbeat, nowayout);
return 0;
exit:
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
- if (resbase_phys)
- release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
return ret;
}
misc_deregister(&sp5100_tco_miscdev);
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
- if (resbase_phys)
- release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
}
#define SB800_PM_WATCHDOG_DISABLE (1 << 2)
#define SB800_PM_WATCHDOG_SECOND_RES (3 << 0)
#define SB800_ACPI_MMIO_DECODE_EN (1 << 0)
-#define SB800_ACPI_MMIO_SEL (1 << 2)
+#define SB800_ACPI_MMIO_SEL (1 << 1)
#define SB800_PM_WDT_MMIO_OFFSET 0xB00
config XEN_STUB
bool "Xen stub drivers"
- depends on XEN && X86_64
+ depends on XEN && X86_64 && BROKEN
default n
help
Allow kernel to install stub drivers, to reserve space for Xen drivers,
if (unlikely((cpu != cpu_from_evtchn(port))))
do_hypercall = 1;
- else
+ else {
+ /*
+ * Need to clear the mask before checking pending to
+ * avoid a race with an event becoming pending.
+ *
+ * EVTCHNOP_unmask will only trigger an upcall if the
+ * mask bit was set, so if a hypercall is needed
+ * remask the event.
+ */
+ sync_clear_bit(port, BM(&s->evtchn_mask[0]));
evtchn_pending = sync_test_bit(port, BM(&s->evtchn_pending[0]));
- if (unlikely(evtchn_pending && xen_hvm_domain()))
- do_hypercall = 1;
+ if (unlikely(evtchn_pending && xen_hvm_domain())) {
+ sync_set_bit(port, BM(&s->evtchn_mask[0]));
+ do_hypercall = 1;
+ }
+ }
/* Slow path (hypercall) if this is a non-local port or if this is
* an hvm domain and an event is pending (hvm domains don't have
} else {
struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
- sync_clear_bit(port, BM(&s->evtchn_mask[0]));
-
/*
* The following is basically the equivalent of
* 'hw_resend_irq'. Just like a real IO-APIC we 'lose
}
EXPORT_SYMBOL_GPL(xen_event_channel_op_compat);
-int HYPERVISOR_physdev_op_compat(int cmd, void *arg)
+int xen_physdev_op_compat(int cmd, void *arg)
{
struct physdev_op op;
int rc;
return rc;
}
+EXPORT_SYMBOL_GPL(xen_physdev_op_compat);
(void)acpi_processor_preregister_performance(acpi_perf_data);
for_each_possible_cpu(i) {
+ struct acpi_processor *pr;
struct acpi_processor_performance *perf;
+ pr = per_cpu(processors, i);
perf = per_cpu_ptr(acpi_perf_data, i);
- rc = acpi_processor_register_performance(perf, i);
+ if (!pr)
+ continue;
+
+ pr->performance = perf;
+ rc = acpi_processor_get_performance_info(pr);
if (rc)
goto err_out;
}
- rc = acpi_processor_notify_smm(THIS_MODULE);
- if (rc)
- goto err_unregister;
for_each_possible_cpu(i) {
struct acpi_processor *_pr;
#include <xen/events.h>
#include <asm/xen/pci.h>
#include <asm/xen/hypervisor.h>
+#include <xen/interface/physdev.h>
#include "pciback.h"
#include "conf_space.h"
#include "conf_space_quirks.h"
static void pcistub_device_release(struct kref *kref)
{
struct pcistub_device *psdev;
+ struct pci_dev *dev;
struct xen_pcibk_dev_data *dev_data;
psdev = container_of(kref, struct pcistub_device, kref);
- dev_data = pci_get_drvdata(psdev->dev);
+ dev = psdev->dev;
+ dev_data = pci_get_drvdata(dev);
- dev_dbg(&psdev->dev->dev, "pcistub_device_release\n");
+ dev_dbg(&dev->dev, "pcistub_device_release\n");
- xen_unregister_device_domain_owner(psdev->dev);
+ xen_unregister_device_domain_owner(dev);
/* Call the reset function which does not take lock as this
* is called from "unbind" which takes a device_lock mutex.
*/
- __pci_reset_function_locked(psdev->dev);
- if (pci_load_and_free_saved_state(psdev->dev,
- &dev_data->pci_saved_state)) {
- dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n");
- } else
- pci_restore_state(psdev->dev);
+ __pci_reset_function_locked(dev);
+ if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
+ dev_dbg(&dev->dev, "Could not reload PCI state\n");
+ else
+ pci_restore_state(dev);
+
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+ int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix,
+ &ppdev);
+
+ if (err)
+ dev_warn(&dev->dev, "MSI-X release failed (%d)\n",
+ err);
+ }
/* Disable the device */
- xen_pcibk_reset_device(psdev->dev);
+ xen_pcibk_reset_device(dev);
kfree(dev_data);
- pci_set_drvdata(psdev->dev, NULL);
+ pci_set_drvdata(dev, NULL);
/* Clean-up the device */
- xen_pcibk_config_free_dyn_fields(psdev->dev);
- xen_pcibk_config_free_dev(psdev->dev);
+ xen_pcibk_config_free_dyn_fields(dev);
+ xen_pcibk_config_free_dev(dev);
- psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
- pci_dev_put(psdev->dev);
+ dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
+ pci_dev_put(dev);
kfree(psdev);
}
if (err)
goto config_release;
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+
+ err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev);
+ if (err)
+ dev_err(&dev->dev, "MSI-X preparation failed (%d)\n",
+ err);
+ }
+
/* We need the device active to save the state. */
dev_dbg(&dev->dev, "save state of device\n");
pci_save_state(dev);
if (dev->msi_enabled)
pci_disable_msi(dev);
#endif
- pci_disable_device(dev);
+ if (pci_is_enabled(dev))
+ pci_disable_device(dev);
pci_write_config_word(dev, PCI_COMMAND, 0);
#include <linux/export.h>
#include <linux/types.h>
#include <linux/acpi.h>
-#include <acpi/acpi_drivers.h>
#include <xen/acpi.h>
#ifdef CONFIG_ACPI
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
-fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += intel/sd7220.fw
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
ess/maestro3_assp_minisrc.fw
--- /dev/null
+:10000000020A29020A87E5E630E6047F0180027FC2
+:1000100000E5E230E4047E0180027E00EE5F6008CD
+:1000200053F9F7E4F5FE80087F0A121731120EA289
+:1000300075FC08E4F5FDE5E720E70343F908220035
+:1000400001201100042000755101E4F552F553F52B
+:1000500052F57E7F04020438C2360552E552D3942D
+:100060000C4005755201D23690070C7407F0A3744A
+:10007000FFF0E4F50CA3F0900714F0A3F0750B204B
+:10008000F509E4F508E508D39430400302040412AE
+:100090000006150BE50870047F0180027F00E5096A
+:1000A00070047E0180027E00EE5F6005121871D23E
+:1000B0003553E1F7E5084509FFE50B25E025E02488
+:1000C00083F582E43407F583EFF085E220E552D32F
+:1000D0009401400D1219F3E054A064407003020330
+:1000E000FB53F9F8909470E4F0E0F510AF09121E9C
+:1000F000B3AF08EF4408F582758380E0F529EF443B
+:1001000007121A3CF5225440D39400401EE52954AE
+:10011000F070211219F3E04480F0E52254306508B4
+:1001200070091219F3E054BFF080091219F37440FA
+:10013000F00203FB121A127583AE74FFF0AF087E53
+:1001400000EF4407F582E0FDE50B25E025E0248182
+:10015000F582E43407F583EDF090070EE004F0EF4C
+:100160004407F582758398E0F528121A23400C1293
+:1001700019F3E04401121A320203F6AF087E00744C
+:1001800080CDEFCD8D82F583E030E00A1219F3E0E7
+:100190004420F00203FB1219F3E054DFF0EE44AE0A
+:1001A000121A4330E4030203FB749E121A0520E086
+:1001B000030203FB8F828E83E020E0030203FB1225
+:1001C00019F3E04410F0E5E320E708E508121A3AD5
+:1001D0004404F0AF087E00EF121A3A20E2341219FC
+:1001E000F3E04408F0E5E430E6047D0180027D00A0
+:1001F000E57EC3940450047C0180027C00EC4D60D9
+:1002000005C2350203FBEE44D2121A434440F00209
+:1002100003FB1219F3E054F7F0121A127583D2E0BF
+:1002200054BFF0900714E004F0E57E7003757E0182
+:10023000AF087E00121A2340121219F3E044011293
+:1002400019F2E05402121A320203FB1219F3E044CD
+:10025000021219F2E054FEF0C235EE448A8F82F5A4
+:1002600083E0F517548F4440F07490FCE508440790
+:10027000FDF5828C83E0543F900702F0E054C08D7E
+:10028000828C83F07492121A05900703121A197463
+:1002900082121A05900704121A1974B4121A0590E2
+:1002A0000705121A197494FEE5084406121A0AF595
+:1002B0001030E004D2378002C237E510547F8F82BD
+:1002C0008E83F0304430121A035480D394004004DB
+:1002D000D2398002C2398F828E83E04480F0121AB4
+:1002E000035440D394004004D23A8002C23A8F8231
+:1002F0008E83E04440F07492FEE5084406121A0A28
+:1003000030E704D2388002C2388F828E83E0547F77
+:10031000F0121E46E4F50A20030280033043031264
+:1003200019952002028003304203120C8F303006F0
+:10033000121995120C8F120D471219F3E054FBF0AD
+:10034000E50AC39401404643E1081219F3E044046E
+:10035000F0E5E420E72A121A127583D2E05408D39C
+:10036000940040047F0180027F00E50AC3940140AD
+:10037000047E0180027E00EF5E6005121DD78017AB
+:10038000121A127583D2E04408F00203FB121A120B
+:100390007583D2E054F7F0121E467F0812173174AD
+:1003A0008EFE121A128E83E0F51054FEF0E5104412
+:1003B00001FFE508FDED4407F582EFF0E51054FE7E
+:1003C000FFED4407F582EF121A11758386E04410A1
+:1003D000121A11E04410F01219F3E054FD4401FF29
+:1003E0001219F3EF121A3230320CE5084408F58284
+:1003F0007583827405F0AF0B1218D774102508F5B9
+:10040000080200850509E509D3940750030200821C
+:10041000E57ED3940040047F0180027F00E57EC327
+:1004200094FA50047E0180027E00EE5F6002057E39
+:1004300030350B43E1017F0912173102005853E1B7
+:10044000FE0200588E6A8F6B8C6C8D6D756E017517
+:100450006F01757001E4F573F574F57590072FF071
+:10046000F53CF53EF546F547F53DF53FF56FE56F93
+:10047000700FE56B456A12072A758380743AF08025
+:100480000912072A758380741AF0E4F56EC3743F6D
+:10049000956EFF120865758382EFF0121A4D1208EF
+:1004A000C6E533F01208FA1208B140E1E56F700BAF
+:1004B00012072A7583807436F0800912072A758323
+:1004C000807416F0756E0112072A7583B4E56EF01C
+:1004D000121A4D743F256EF582E43400F583E5333E
+:1004E000F074BF256EF582E434001208B140D8E400
+:1004F000F570F546F547F56E1208FAF583E0FE1241
+:1005000008C6E07C002400FFEC3EFEAD3BD3EF9D2F
+:10051000EE9C50047B0180027B00E57070047A0140
+:1005200080027A00EB5A6006856E46757001D3EF43
+:100530009DEE9C50047F0180027F00E570B40104B1
+:100540007E0180027E00EF5E6003856E47056EE5EA
+:100550006E647F70A3E5466005E547B47E0385467B
+:1005600047E56F7008854676854777800EC3747FB0
+:100570009546F578C3747F9547F579E56F7037E553
+:10058000466547700C757301757401F53CF53D8047
+:1005900035E4F54EC3E5479546F53CC313F57125A3
+:1005A00046F572C3943F4005E4F53D8040C3743F77
+:1005B0009572F53D8037E5466547700F7573017597
+:1005C0007501F53EF53F754E018022E4F54EC3E519
+:1005D000479546F53EC313F5712546F572D3943F12
+:1005E0005005E4F53F8006E57224C1F53F056FE54F
+:1005F0006FC39402500302046EE56D456C70028077
+:1006000004E574457590072FF07F01E53E6004E531
+:100610003C7014E4F53CF53DF53EF53F1208D27010
+:1006200004F00206A4807AE53CC3953E4007E53C11
+:10063000953EFF8006C3E53E953CFFE576D3957970
+:10064000400585767A800385797AE577C395785079
+:100650000585777B800385787BE57BD3957A403071
+:10066000E57B957AF53CF53EC3E57B957A900719D5
+:10067000F0E53CC313F571257AF572C3943F40054C
+:10068000E4F53D801FC3743F9572F53DF53F80143E
+:10069000E4F53CF53E900719F01208D27003F080A3
+:1006A000037401F01208657583D0E0540FFEAD3C71
+:1006B00070027E07BE0F027E80EEFBEFD39B74803C
+:1006C000F898401FE4F53CF53E1208D27003F08024
+:1006D000127401F0E508FBEB4407F5827583D2E064
+:1006E0004410F0E508FBEB4409F58275839EEDF0BC
+:1006F000EB4407F5827583CAEDF01208657583CC6B
+:10070000EFF022E5084407F5827583BCE054F0F071
+:10071000E5084407F5827583BEE054F0F0E508442F
+:1007200007F5827583C0E054F0F0E5084407F582D0
+:1007300022F0900728E0FEA3E0F5828E8322854216
+:100740004285414185404074C02FF58274023EF5D8
+:1007500083E542F074E02FF58274023EF58322E5D2
+:100760004229FDE433FCE53CC39DEC6480F87480D1
+:100770009822F583E0900722541FFDE0FAA3E0F5EC
+:10078000828A83EDF022900722E0FCA3E0F5828CC0
+:100790008322900724FFED4407CFF0A3EFF02285DA
+:1007A0003838853939853A3A74C02FF58274023E5B
+:1007B000F58322900726FFED4407CFF0A3EFF02248
+:1007C000F074A02FF58274023EF5832274C02511C7
+:1007D000F582E43401F5832274002511F582E434B6
+:1007E00002F5832274602511F582E43403F5832237
+:1007F00074802511F582E43403F5832274E0251119
+:10080000F582E43403F5832274402511F582E43443
+:1008100006F5832274802FF58274023EF58322AFA1
+:10082000087E00EF4407F58222F583E5824407F550
+:1008300082E540F02274402511F582E43402F5830C
+:100840002274C02511F582E43403F5832274002557
+:1008500011F582E43406F5832274202511F582E433
+:100860003406F58322E508FDED4407F58222E541D3
+:10087000F0E56564014564227E00FB7A00FD7C00A2
+:100880002274202511F582E434022274A02511F58A
+:1008900082E4340322853E42853F418F4022853CDD
+:1008A00042853D418F402275453F900720E4F0A3EB
+:1008B00022F583E532F0056EE56EC3944022F0E543
+:1008C000084406F582227400256EF582E43400F5B2
+:1008D0008322E56D456C90072F22E4F9E53CD39522
+:1008E0003E2274802EF582E43402F583E02274A067
+:1008F0002EF582E43402F583E0227480256EF582C1
+:10090000E43400222542FDE433FC22854242854145
+:100910004185404022ED4C60030209E5EF4E7037FF
+:10092000900726120789E0FD1207CCEDF09007280A
+:10093000120789E0FD1207D8EDF0120786E0541F78
+:10094000FD120881F583EDF0900724120789E05429
+:100950001FFD120835EDF0EF64044E703790072646
+:10096000120789E0FD1207E4EDF0900728120789CD
+:10097000E0FD1207F0EDF0120786E0541FFD1208AB
+:100980008BF583EDF0900724120789E0541FFD12C8
+:100990000841EDF0EF64014E70047D0180027D009E
+:1009A000EF64024E70047F0180027F00EF4D60789B
+:1009B000900726120735E0FF1207FCEF120731E01F
+:1009C000FF120808EFF0900722120735E0541FFFCE
+:1009D00012084DEFF0900724120735E0541FFF1264
+:1009E0000859EFF0221207CCE4F01207D8E4F01215
+:1009F0000881F583E4F01208357414F01207E4E47A
+:100A0000F01207F0E4F012088BF583E4F0120841CD
+:100A10007414F01207FCE4F0120808E4F012084D18
+:100A2000E4F01208597414F02253F9F775FC10E43D
+:100A3000F5FD75FE30F5FFE5E720E70343F908E52E
+:100A4000E620E70B78FFE4F6D8FD53E6FE80097850
+:100A500008E4F6D8FD53E6FE758180E4F5A8D2A837
+:100A6000C2A9D2AFE5E220E50520E602800343E11A
+:100A700002E5E220E00E9000007F007E08E4F0A393
+:100A8000DFFCDEFA020ADB43FA01C0E0C0F0C083FB
+:100A9000C082C0D0121CE7D0D0D082D083D0F0D09A
+:100AA000E053FAFE32021B55E493A3F8E493A3F655
+:100AB00008DFF98029E493A3F85407240CC8C33352
+:100AC000C4540F4420C8834004F456800146F6DF26
+:100AD000E4800B010204081020408090003FE47E77
+:100AE000019360C1A3FF543F30E509541FFEE49316
+:100AF000A360010ECF54C025E060AD40B880FE8CED
+:100B0000648D658A668B67E4F569EF4E7003021D9C
+:100B100055E4F568E5674566703212072A758390DB
+:100B2000E41207297583C2E41207297583C4E4120D
+:100B30000870702912072A758392E41207297583B9
+:100B4000C6E41207297583C8E4F0801190072612C5
+:100B50000735E41208707005120732E4F0121D55D3
+:100B6000121EBFE5674566703312072A758390E54C
+:100B7000411207297583C2E5411207297583C41202
+:100B8000086E702912072A758392E54012072975AD
+:100B900083C6E5401207297583C8800E9007261288
+:100BA000073512086E7006120732E540F0AF697E15
+:100BB00000AD67AC6612044412072A7583CAE0D3FD
+:100BC0009400500C0568E568C394055003020B14AB
+:100BD000228C608D611208DA7420400D2FF582742A
+:100BE000033EF583E53EF0800B2FF58274033EF55E
+:100BF00083E53CF0E53CD3953E403CE561456070C3
+:100C000010E9120904E53E120768403B120895807E
+:100C100018E53EC39538401D853E38E53E600585A4
+:100C20003F3980038539398F3A120814E53E12079F
+:100C3000C0E53FF0228043E5614560701912075F0F
+:100C4000400512089E802712090B120814E5421273
+:100C500007C0E541F022E53CC39538401D853C388E
+:100C6000E53C6005853D3980038539398F3A1208A6
+:100C700014E53C1207C0E53DF02285383885393946
+:100C8000853A3A120814E5381207C0E539F0227F98
+:100C900006121731121D23120E04120E33E0440AFD
+:100CA000F0748EFE120E04120E0BEFF0E52830E504
+:100CB00003D38001C3400575142080037514081206
+:100CC0000E0475838AE514F0B4FF05751280800662
+:100CD000E514C313F512E4F516F57F121936121355
+:100CE000A3E50AC3940150090516E516C394144000
+:100CF000EAE5E420E728120E047583D2E05408D315
+:100D0000940040047F0180027F00E50AC394014003
+:100D1000047E0180027E00EF5E6003121DD7E57F36
+:100D2000C394114014120E047583D2E04480F0E5A0
+:100D3000E420E70F121DD7800A120E047583D2E05B
+:100D4000547FF0121D2322748A850882F583E517EB
+:100D5000F0120E3AE4F0900702E0120E177583903D
+:100D6000EFF07492FEE5084407FFF5828E83E054AD
+:100D7000C0FD900703E0543F4D8F828E83F09007B3
+:100D800004E0120E17758382EFF0900705E0FFED87
+:100D90004407F5827583B4EF120E03758380E05427
+:100DA000BFF030370A120E91758394E04480F03022
+:100DB000380A120E91758392E04480F0E52830E401
+:100DC0001A20390A120E04758388E0547FF0203A05
+:100DD0000A120E04758388E054BFF0748CFE120E64
+:100DE000048E83E0540F120E03758386E054BFF027
+:100DF000E5084406120DFD75838AE4F022F582753C
+:100E00008382E4F0E5084407F582228E83E0F51042
+:100E100054FEF0E5104401FFE508FDED4407F582BE
+:100E200022E515C45407FFE508FDED4408F5827579
+:100E3000838222758380E04440F0E5084408F5820F
+:100E400075838A22E51625E025E024AFF582E43497
+:100E50001AF583E493F50D2243E11043E18053E159
+:100E6000FD85E11022E51625E025E024B2F582E4B7
+:100E7000341AF583E49322855582855483E515F071
+:100E800022E5E25420D3940022E5E25440D39400BA
+:100E900022E5084406F58222FDE508FBEB4407F550
+:100EA000822253F9F775FE3022EF4E70261207CCDE
+:100EB000E0FD90072612077B1207D8E0FD90072877
+:100EC00012077B120881120772120835E09007247E
+:100ED000120778EF64044E70291207E4E0FD9007D2
+:100EE0002612077B1207F0E0FD90072812077B12FD
+:100EF000088B120772120841E0541FFD900724125C
+:100F0000077BEF64014E70047D0180027D00EF6479
+:100F1000024E70047F0180027F00EF4D60351207A2
+:100F2000FCE0FF900726120789EFF0120808E0FFA7
+:100F3000900728120789EFF012084DE0541FFF12A6
+:100F40000786EFF0120859E0541FFF90072412079C
+:100F500089EFF022E4F553120E8140047F018002F4
+:100F60007F00120E8940047E0180027E00EE4F70E9
+:100F700003020FF685E11043E10253E10F85E11012
+:100F8000E4F551E5E3543FF552120E89401DAD5290
+:100F9000AF51121118EF600885E11043E140800B5A
+:100FA00053E1BF120E5812000680FBE5E3543FF5F3
+:100FB00051E5E4543FF552120E81401DAD52AF5140
+:100FC000121118EF600885E11043E120800B53E116
+:100FD000DF120E5812000680FB120E8140047F01C2
+:100FE00080027F00120E8940047E0180027E00EEA6
+:100FF0004F6003120E5B22120E21EFF012109122AD
+:1010000002110002104002109000000000000000D9
+:1010100001200120E4F5571216BD121644E4121007
+:10102000561214B7900726120735E4120731E4F080
+:101030001210561214B7900726120735E541120711
+:1010400031E540F0AF577E00AD567C00120444AF4E
+:10105000567E000211EEFF900720A3E0FDE4F55656
+:10106000F540FEFCAB56FA1211517F0F7D18E4F5E6
+:1010700056F540FEFCAB56FA121541AF567E0012F3
+:101080001AFFE4FFF5567D1FF540FEFCAB56FA2231
+:1010900022E4F555E508FD74A0F556ED4407F55733
+:1010A000E52830E503D38001C340057F28EF8004A5
+:1010B0007F14EFC313F554E4F9120E1875838EE014
+:1010C000F510CEEFCEEED394004026E51054FE127C
+:1010D0000E9875838EEDF0E5104401FDEB4407F5A5
+:1010E00082EDF0855782855683E030E301091E804A
+:1010F000D4C234E9C395544002D2342202000622FD
+:10110000303011901000E493F510901010E493F536
+:101110001012109012115022E4FCC3ED9FFAEFF56B
+:101120008375820079FFE493CC6CCCA3D9F8DAF60E
+:10113000E5E230E4028CE5ED24FFFFEF7582FFF578
+:1011400083E4936C70037F01227F00222211000050
+:10115000228E588F598C5A8D5B8A5C8B5D755E012F
+:10116000E4F55FF560F56212072A7583D0E0FFC4ED
+:10117000540FF561121EA585595ED3E55E955BE5BA
+:101180005A12076B504B1207037583BCE0455E1281
+:1011900007297583BEE0455E1207297583C0E045C7
+:1011A0005EF0AF5FE560120878120AFFAF627E0062
+:1011B000AD5DAC5C120444E561AF5E7E00B4030536
+:1011C000121E218007AD5DAC5C121317055E021183
+:1011D0007A1207037583BCE045401207297583BE68
+:1011E000E045401207297583C0E04540F0228E5843
+:1011F0008F59755A017901755B01E4FB12072A7555
+:1012000083AEE0541AFF120865E0C4135407FEEFE2
+:10121000700CEE6535700790072FE0B4010DAF3507
+:101220007E00120EA9CFEBCF021E60E55964024585
+:101230005870047F0180027F00E559455870047E94
+:101240000180027E00EE4F602385414985404BE5D9
+:10125000594558702CAF5AFECDE9CDFCAB59AA5870
+:10126000120AFFAF5B7E00121E608015AF5B7E002E
+:10127000121E60900726120735E549120731E54B2B
+:10128000F0E4FDAF35FEFC120915228C648D651269
+:1012900008DA403CE56545647010120904C3E53E78
+:1012A000120769403B1208958018E53EC395384007
+:1012B0001D853E38E53E6005853F39800385393917
+:1012C0008F3A1207A8E53E120753E53FF022803B14
+:1012D000E5654564701112075F400512089E801F86
+:1012E00012073EE541F022E53CC39538401D853CA0
+:1012F00038E53C6005853D3980038539398F3A12E0
+:1013000007A8E53C120753E53DF02212079FE53898
+:10131000120753E539F0228C638D641208DA403CE1
+:10132000E56445637010120904C3E53E1207694085
+:101330003B1208958018E53EC39538401D853E3820
+:10134000E53E6005853F3980038539398F3A1207BC
+:10135000A8E53E120753E53FF022803BE564456374
+:10136000701112075F400512089E801F12073EE5AC
+:1013700041F022E53CC39538401D853C38E53C6092
+:1013800005853D3980038539398F3A1207A8E53C38
+:10139000120753E53DF02212079FE538120753E587
+:1013A00039F022E50DFEE5088E544405F555751516
+:1013B0000FF582120E7A1217A320310575150380DE
+:1013C0000375150BE50AC39401503812142020311F
+:1013D0000605150515800415151515E50AC39401B4
+:1013E0005021121420203104051580021515E50A3C
+:1013F000C39401500E120E771217A3203105051564
+:10140000120E77E515B408047F0180027F00E51510
+:10141000B407047E0180027E00EE4F6002057F2249
+:10142000855582855483E515F01217A32212072AE9
+:101430007583AE74FF120729E0541AF534E0C41323
+:101440005407F53524FE602424FE603C24047063B8
+:1014500075312DE508FD74B612079274BC90072211
+:1014600012079574901207B37492803C75313AE577
+:1014700008FD74BA12079274C09007221207B6745E
+:10148000C41207B374C88020753135E508FD74B8FF
+:1014900012079274BEFFED4407900722CFF0A3EF2E
+:1014A000F074C21207B374C6FFED4407A3CFF0A3D4
+:1014B000EFF022753401228E588F598C5A8D5B8A39
+:1014C0005C8B5D755E01E4F55F121EA585595ED3E8
+:1014D000E55E955BE55A12076B5057E55D455C701C
+:1014E0003012072A758392E55E1207297583C6E5D7
+:1014F0005E1207297583C8E55E120729758390E59A
+:101500005E1207297583C2E55E1207297583C480C0
+:1015100003120732E55EF0AF5F7E00AD5DAC5C129A
+:101520000444AF5E7E00AD5DAC5C120BD1055E0283
+:1015300014CFAB5DAA5CAD5BAC5AAF59AE58021B81
+:10154000FB8C5C8D5D8A5E8B5F756001E4F561F5F7
+:1015500062F563121EA58F60D3E560955DE55C12B0
+:10156000076B5061E55F455E702712072A7583B6E9
+:10157000E5601207297583B8E5601207297583BAFB
+:10158000E560F0AF617E00E56212087A120AFF8022
+:1015900019900724120735E56012072975838EE438
+:1015A0001207297401120729E4F0AF637E00AD5FD2
+:1015B000AC5E120444AF607E00AD5FAC5E12128B75
+:1015C00005600215582290114DE49390072EF012F9
+:1015D000081F7583AEE0541AF5347067EF4407F5C1
+:1015E000827583CEE0FF1313135407F536540FD3DF
+:1015F0009400400612142D121BA9E536540F24FE48
+:10160000600C14600C146019240370378010021EE3
+:1016100091121E9112072A7583CEE054EFF0021D3D
+:10162000AE121014E4F555121D850555E555C39409
+:101630000540F412072A7583CEE054C7120729E04B
+:101640004408F022E4F558F559AF08EF4407F58255
+:101650007583D0E0FDC4540FF55AEF4407F5827549
+:1016600083807401F0120821758382E545F0EF4410
+:1016700007F58275838A74FFF0121A4D12072A75D6
+:1016800083BCE054EF1207297583BEE054EF1207C4
+:10169000297583C0E054EF1207297583BCE044101C
+:1016A0001207297583BEE044101207297583C0E034
+:1016B0004410F0AF58E559120878020AFFE4F558D3
+:1016C0007D01F559AF35FEFC12091512072A758305
+:1016D000B674101207297583B87410120729758320
+:1016E000BA74101207297583BC7410120729758308
+:1016F000BE74101207297583C074101207297583F0
+:1017000090E41207297583C2E41207297583C4E4A3
+:10171000120729758392E41207297583C6E412071C
+:10172000297583C8E4F0AF58FEE55912087A020A19
+:10173000FFE5E230E46CE5E754C064407064E5091D
+:10174000C45430FEE50825E025E054C04EFEEF54B9
+:101750003F4EFDE52BAE2A7802C333CE33CED8F907
+:10176000F5828E83EDF0E52BAE2A7802C333CE33BB
+:10177000CED8F9FFF5828E83A3E5FEF08F828E83AB
+:10178000A3A3E5FDF08F828E83A3A3A3E5FCF0C3A2
+:10179000E52B94FAE52A94005008052BE52B7002FE
+:1017A000052A22E4FFE4F558F556F5577482FC1239
+:1017B0000E048C83E0F510547FF0E5104480120E87
+:1017C00098EDF07E0A120E047583A0E020E026DE7C
+:1017D000F40557E55770020556E5142401FDE4337E
+:1017E000FCD3E5579DE5569C40D9E50A942050026C
+:1017F000050A43E108C231120E047583A6E05512B2
+:1018000065127003D23122C23122900726E0FAA37A
+:10181000E0F5828A83E0F541E539C395414026E54C
+:10182000399541C39FEE12076B40047C0180027C16
+:1018300000E541643F60047B0180027B00EC5B605B
+:101840002905418028C3E5419539C39FEE12076BF6
+:1018500040047F0180027F00E54160047E01800238
+:101860007E00EF5E600415418003853941853A4072
+:1018700022E5E230E460E5E130E25BE50970047FF7
+:101880000180027F00E50870047E0180027E00EE88
+:101890005F604353F9F8E5E230E43BE5E130E22EE6
+:1018A00043FA0253FAFBE4F510909470E510F0E56A
+:1018B000E130E2E7909470E06510600343FA0405BC
+:1018C00010909470E510F070E612000680E153FA73
+:1018D000FD53FAFB80C0228F54120006E5E130E090
+:1018E000047F0180027F00E57ED3940540047E01E1
+:1018F00080027E00EE4F603D855411E5E220E1322A
+:1019000074CE121A0530E7047D0180027D008F82BB
+:101910008E83E030E6047F0180027F00EF5D70156A
+:101920001215C674CE121A0530E607E04480F04363
+:10193000F98012187122120E44E51625E025E024E4
+:10194000B0F582E4341AF583E493F50FE51625E04B
+:1019500025E024B1F582E4341AF583E493F50E1200
+:101960000E65F510E50F54F0120E1775838CEFF02D
+:10197000E50F30E00C120E04758386E04440F080E1
+:101980000A120E04758386E054BFF0120E9175831F
+:1019900082E50EF0227F05121731120E04120E336B
+:1019A0007402F0748EFE120E04120E0BEFF0751519
+:1019B00070120FF72034057515108003751550123D
+:1019C0000FF72034047410800274F02515F51512F9
+:1019D0000E21EFF0121091203417E5156430600CE1
+:1019E00074102515F515B48003E4F515120E21EFDA
+:1019F000F022F0E50B25E025E02482F582E43407AF
+:101A0000F583227488FEE5084407FFF5828E83E0A3
+:101A100022F0E5084407F58222F0E054C08F828E60
+:101A200083F022EF4407F582758386E05410D39447
+:101A30000022F0900715E004F0224406F582758339
+:101A40009EE022FEEF4407F5828E83E022E49007B9
+:101A50002AF0A3F012072A758382E0547F12072927
+:101A6000E04480F01210FC12081F7583A0E020E013
+:101A70001A90072BE004F0700690072AE004F0901B
+:101A8000072AE0B410E1A3E0B400DCEE44A6FCEFCA
+:101A90004407F5828C83E0F532EE44A8FEEF44075C
+:101AA000F5828E83E0F5332201201100042000909E
+:101AB00000200F9200210F9400220F9600230F9810
+:101AC00000240F9A00250F9C00260F9E00270FA0D0
+:101AD000012001A2012101A4012201A6012301A8E4
+:101AE000012401AA012501AC012601AE012701B0A4
+:101AF000012801B400280FB640280FB8612801CB97
+:101B0000EFCBCAEECA7F01E4FDEB4A7024E508F58D
+:101B10008274B6120829E508F58274B8120829E51E
+:101B200008F58274BA1208297E007C00120AFF8030
+:101B300012900726120735E541F090072412073569
+:101B4000E540F012072A75838EE41207297401120A
+:101B50000729E4F022E4F526F52753E1FEF52A757E
+:101B60002B01F5087F0112173130301C901AA9E4BF
+:101B700093F510901FF9E493F510900041E493F56C
+:101B800010901ECAE493F5107F02121731120F5401
+:101B90007F03121731120006E5E230E70912100048
+:101BA00030300312110002004712081F7583D0E085
+:101BB000C4540FFD7543017544FF1208AA7404F064
+:101BC000753B01ED14600C14600B14600F2403705E
+:101BD0000B800980001208A704F080061208A77481
+:101BE00004F0EE4482FEEF4407F5828E83E5451251
+:101BF00008BE758382E531F002114C8E608F611250
+:101C00001EA5E4FFCEEDCEEED39561E56012076B25
+:101C1000403974202EF582E43403F583E07003FF2D
+:101C200080261208E2FDC39F401ECFEDCFEB4A7025
+:101C30000B8D421208EEF5418E40800C1208E2F541
+:101C4000381208EEF5398E3A1E80BC22755801E52F
+:101C500035700C1207CCE0F54A1207D8E0F54CE5D8
+:101C600035B4040C1207E4E0F54A1207F0E0F54C35
+:101C7000E535B401047F0180027F00E535B402043C
+:101C80007E0180027E00EE4F600C1207FCE0F54AF8
+:101C9000120808E0F54C85414985404B22755B01EF
+:101CA000900724120735E0541FFFD3940250048F8D
+:101CB000588005EF24FEF558EFC394184005755978
+:101CC000188004EF04F55985435AAF587E00AD598A
+:101CD0007C00AB5B7A00121541AF5A7E0012180AE5
+:101CE000AF5B7E00021AFFE5E230E70E121003C27E
+:101CF000303030031210FF203328E5E730E70512BB
+:101D00000EA2800DE5FEC394205006120EA243F9E8
+:101D100008E5F230E70353F97FE5F15470D39400FE
+:101D200050D822120E04758380E4F0E508440712AF
+:101D30000DFD758384120E02758386120E02758363
+:101D40008CE054F3120E0375838E120E0275839489
+:101D5000E054FBF02212072A75838EE412072974DF
+:101D600001120729E41208BE75838CE04420120892
+:101D7000BEE054DFF07484850882F583E0547FF080
+:101D8000E04480F022755601E4FDF557AF35FEFCC6
+:101D9000120915121C9D121E7A121C4CAF577E00A0
+:101DA000AD567C00120444AF567E000211EE75560B
+:101DB00001E4FDF557AF35FEFC120915121C9D120A
+:101DC0001E7A121C4CAF577E00AD567C00120444A4
+:101DD000AF567E000211EEE4F516120E44FEE50841
+:101DE0004405FF120E658F828E83F00516E516C33B
+:101DF000941440E6E508120E2BE4F022E4F558F5C1
+:101E000059F55AFFFEAD58FC1209157F047E00AD4E
+:101E1000587C001209157F027E00AD587C00020933
+:101E200015E53C253EFCE5422400FBE433FAECC317
+:101E30009BEA12076B400B8C42E53D253FF5418F35
+:101E4000402212090B227484F5188508198519821D
+:101E5000851883E0547FF0E04480F0E04480F02275
+:101E6000EF4E700B12072A7583D2E054DFF0221276
+:101E7000072A7583D2E04420F02275580190072686
+:101E8000120735E0543FF541120732E0543FF54068
+:101E900022755602E4F557121DFCAF577E00AD5671
+:101EA0007C00020444E4F542F541F540F538F5398B
+:101EB000F53A22EF5407FFE5F954F84FF5F9227F80
+:101EC00001E4FE0F0EBEFFFB2201200001042000F2
+:101ED0000000000000000000000000000000000002
+:101EE00000000000000000000000000000000000F2
+:101EF00000000000000000000000000000000000E2
+:101F000000000000000000000000000000000000D1
+:101F100000000000000000000000000000000000C1
+:101F200000000000000000000000000000000000B1
+:101F300000000000000000000000000000000000A1
+:101F40000000000000000000000000000000000091
+:101F50000000000000000000000000000000000081
+:101F60000000000000000000000000000000000071
+:101F70000000000000000000000000000000000061
+:101F80000000000000000000000000000000000051
+:101F90000000000000000000000000000000000041
+:101FA0000000000000000000000000000000000031
+:101FB0000000000000000000000000000000000021
+:101FC0000000000000000000000000000000000011
+:101FD0000000000000000000000000000000000001
+:101FE00000000000000000000000000000000000F1
+:101FF000000000000000000001201100042000810A
+:00000001FF
+++ /dev/null
-:10000000020A29020A87E5E630E6047F0180027FC2
-:1000100000E5E230E4047E0180027E00EE5F6008CD
-:1000200053F9F7E4F5FE80087F0A121731120EA289
-:1000300075FC08E4F5FDE5E720E70343F908220035
-:1000400001201100042000755101E4F552F553F52B
-:1000500052F57E7F04020438C2360552E552D3942D
-:100060000C4005755201D23690070C7407F0A3744A
-:10007000FFF0E4F50CA3F0900714F0A3F0750B204B
-:10008000F509E4F508E508D39430400302040412AE
-:100090000006150BE50870047F0180027F00E5096A
-:1000A00070047E0180027E00EE5F6005121871D23E
-:1000B0003553E1F7E5084509FFE50B25E025E02488
-:1000C00083F582E43407F583EFF085E220E552D32F
-:1000D0009401400D1219F3E054A064407003020330
-:1000E000FB53F9F8909470E4F0E0F510AF09121E9C
-:1000F000B3AF08EF4408F582758380E0F529EF443B
-:1001000007121A3CF5225440D39400401EE52954AE
-:10011000F070211219F3E04480F0E52254306508B4
-:1001200070091219F3E054BFF080091219F37440FA
-:10013000F00203FB121A127583AE74FFF0AF087E53
-:1001400000EF4407F582E0FDE50B25E025E0248182
-:10015000F582E43407F583EDF090070EE004F0EF4C
-:100160004407F582758398E0F528121A23400C1293
-:1001700019F3E04401121A320203F6AF087E00744C
-:1001800080CDEFCD8D82F583E030E00A1219F3E0E7
-:100190004420F00203FB1219F3E054DFF0EE44AE0A
-:1001A000121A4330E4030203FB749E121A0520E086
-:1001B000030203FB8F828E83E020E0030203FB1225
-:1001C00019F3E04410F0E5E320E708E508121A3AD5
-:1001D0004404F0AF087E00EF121A3A20E2341219FC
-:1001E000F3E04408F0E5E430E6047D0180027D00A0
-:1001F000E57EC3940450047C0180027C00EC4D60D9
-:1002000005C2350203FBEE44D2121A434440F00209
-:1002100003FB1219F3E054F7F0121A127583D2E0BF
-:1002200054BFF0900714E004F0E57E7003757E0182
-:10023000AF087E00121A2340121219F3E044011293
-:1002400019F2E05402121A320203FB1219F3E044CD
-:10025000021219F2E054FEF0C235EE448A8F82F5A4
-:1002600083E0F517548F4440F07490FCE508440790
-:10027000FDF5828C83E0543F900702F0E054C08D7E
-:10028000828C83F07492121A05900703121A197463
-:1002900082121A05900704121A1974B4121A0590E2
-:1002A0000705121A197494FEE5084406121A0AF595
-:1002B0001030E004D2378002C237E510547F8F82BD
-:1002C0008E83F0304430121A035480D394004004DB
-:1002D000D2398002C2398F828E83E04480F0121AB4
-:1002E000035440D394004004D23A8002C23A8F8231
-:1002F0008E83E04440F07492FEE5084406121A0A28
-:1003000030E704D2388002C2388F828E83E0547F77
-:10031000F0121E46E4F50A20030280033043031264
-:1003200019952002028003304203120C8F303006F0
-:10033000121995120C8F120D471219F3E054FBF0AD
-:10034000E50AC39401404643E1081219F3E044046E
-:10035000F0E5E420E72A121A127583D2E05408D39C
-:10036000940040047F0180027F00E50AC3940140AD
-:10037000047E0180027E00EF5E6005121DD78017AB
-:10038000121A127583D2E04408F00203FB121A120B
-:100390007583D2E054F7F0121E467F0812173174AD
-:1003A0008EFE121A128E83E0F51054FEF0E5104412
-:1003B00001FFE508FDED4407F582EFF0E51054FE7E
-:1003C000FFED4407F582EF121A11758386E04410A1
-:1003D000121A11E04410F01219F3E054FD4401FF29
-:1003E0001219F3EF121A3230320CE5084408F58284
-:1003F0007583827405F0AF0B1218D774102508F5B9
-:10040000080200850509E509D3940750030200821C
-:10041000E57ED3940040047F0180027F00E57EC327
-:1004200094FA50047E0180027E00EE5F6002057E39
-:1004300030350B43E1017F0912173102005853E1B7
-:10044000FE0200588E6A8F6B8C6C8D6D756E017517
-:100450006F01757001E4F573F574F57590072FF071
-:10046000F53CF53EF546F547F53DF53FF56FE56F93
-:10047000700FE56B456A12072A758380743AF08025
-:100480000912072A758380741AF0E4F56EC3743F6D
-:10049000956EFF120865758382EFF0121A4D1208EF
-:1004A000C6E533F01208FA1208B140E1E56F700BAF
-:1004B00012072A7583807436F0800912072A758323
-:1004C000807416F0756E0112072A7583B4E56EF01C
-:1004D000121A4D743F256EF582E43400F583E5333E
-:1004E000F074BF256EF582E434001208B140D8E400
-:1004F000F570F546F547F56E1208FAF583E0FE1241
-:1005000008C6E07C002400FFEC3EFEAD3BD3EF9D2F
-:10051000EE9C50047B0180027B00E57070047A0140
-:1005200080027A00EB5A6006856E46757001D3EF43
-:100530009DEE9C50047F0180027F00E570B40104B1
-:100540007E0180027E00EF5E6003856E47056EE5EA
-:100550006E647F70A3E5466005E547B47E0385467B
-:1005600047E56F7008854676854777800EC3747FB0
-:100570009546F578C3747F9547F579E56F7037E553
-:10058000466547700C757301757401F53CF53D8047
-:1005900035E4F54EC3E5479546F53CC313F57125A3
-:1005A00046F572C3943F4005E4F53D8040C3743F77
-:1005B0009572F53D8037E5466547700F7573017597
-:1005C0007501F53EF53F754E018022E4F54EC3E519
-:1005D000479546F53EC313F5712546F572D3943F12
-:1005E0005005E4F53F8006E57224C1F53F056FE54F
-:1005F0006FC39402500302046EE56D456C70028077
-:1006000004E574457590072FF07F01E53E6004E531
-:100610003C7014E4F53CF53DF53EF53F1208D27010
-:1006200004F00206A4807AE53CC3953E4007E53C11
-:10063000953EFF8006C3E53E953CFFE576D3957970
-:10064000400585767A800385797AE577C395785079
-:100650000585777B800385787BE57BD3957A403071
-:10066000E57B957AF53CF53EC3E57B957A900719D5
-:10067000F0E53CC313F571257AF572C3943F40054C
-:10068000E4F53D801FC3743F9572F53DF53F80143E
-:10069000E4F53CF53E900719F01208D27003F080A3
-:1006A000037401F01208657583D0E0540FFEAD3C71
-:1006B00070027E07BE0F027E80EEFBEFD39B74803C
-:1006C000F898401FE4F53CF53E1208D27003F08024
-:1006D000127401F0E508FBEB4407F5827583D2E064
-:1006E0004410F0E508FBEB4409F58275839EEDF0BC
-:1006F000EB4407F5827583CAEDF01208657583CC6B
-:10070000EFF022E5084407F5827583BCE054F0F071
-:10071000E5084407F5827583BEE054F0F0E508442F
-:1007200007F5827583C0E054F0F0E5084407F582D0
-:1007300022F0900728E0FEA3E0F5828E8322854216
-:100740004285414185404074C02FF58274023EF5D8
-:1007500083E542F074E02FF58274023EF58322E5D2
-:100760004229FDE433FCE53CC39DEC6480F87480D1
-:100770009822F583E0900722541FFDE0FAA3E0F5EC
-:10078000828A83EDF022900722E0FCA3E0F5828CC0
-:100790008322900724FFED4407CFF0A3EFF02285DA
-:1007A0003838853939853A3A74C02FF58274023E5B
-:1007B000F58322900726FFED4407CFF0A3EFF02248
-:1007C000F074A02FF58274023EF5832274C02511C7
-:1007D000F582E43401F5832274002511F582E434B6
-:1007E00002F5832274602511F582E43403F5832237
-:1007F00074802511F582E43403F5832274E0251119
-:10080000F582E43403F5832274402511F582E43443
-:1008100006F5832274802FF58274023EF58322AFA1
-:10082000087E00EF4407F58222F583E5824407F550
-:1008300082E540F02274402511F582E43402F5830C
-:100840002274C02511F582E43403F5832274002557
-:1008500011F582E43406F5832274202511F582E433
-:100860003406F58322E508FDED4407F58222E541D3
-:10087000F0E56564014564227E00FB7A00FD7C00A2
-:100880002274202511F582E434022274A02511F58A
-:1008900082E4340322853E42853F418F4022853CDD
-:1008A00042853D418F402275453F900720E4F0A3EB
-:1008B00022F583E532F0056EE56EC3944022F0E543
-:1008C000084406F582227400256EF582E43400F5B2
-:1008D0008322E56D456C90072F22E4F9E53CD39522
-:1008E0003E2274802EF582E43402F583E02274A067
-:1008F0002EF582E43402F583E0227480256EF582C1
-:10090000E43400222542FDE433FC22854242854145
-:100910004185404022ED4C60030209E5EF4E7037FF
-:10092000900726120789E0FD1207CCEDF09007280A
-:10093000120789E0FD1207D8EDF0120786E0541F78
-:10094000FD120881F583EDF0900724120789E05429
-:100950001FFD120835EDF0EF64044E703790072646
-:10096000120789E0FD1207E4EDF0900728120789CD
-:10097000E0FD1207F0EDF0120786E0541FFD1208AB
-:100980008BF583EDF0900724120789E0541FFD12C8
-:100990000841EDF0EF64014E70047D0180027D009E
-:1009A000EF64024E70047F0180027F00EF4D60789B
-:1009B000900726120735E0FF1207FCEF120731E01F
-:1009C000FF120808EFF0900722120735E0541FFFCE
-:1009D00012084DEFF0900724120735E0541FFF1264
-:1009E0000859EFF0221207CCE4F01207D8E4F01215
-:1009F0000881F583E4F01208357414F01207E4E47A
-:100A0000F01207F0E4F012088BF583E4F0120841CD
-:100A10007414F01207FCE4F0120808E4F012084D18
-:100A2000E4F01208597414F02253F9F775FC10E43D
-:100A3000F5FD75FE30F5FFE5E720E70343F908E52E
-:100A4000E620E70B78FFE4F6D8FD53E6FE80097850
-:100A500008E4F6D8FD53E6FE758180E4F5A8D2A837
-:100A6000C2A9D2AFE5E220E50520E602800343E11A
-:100A700002E5E220E00E9000007F007E08E4F0A393
-:100A8000DFFCDEFA020ADB43FA01C0E0C0F0C083FB
-:100A9000C082C0D0121CE7D0D0D082D083D0F0D09A
-:100AA000E053FAFE32021B55E493A3F8E493A3F655
-:100AB00008DFF98029E493A3F85407240CC8C33352
-:100AC000C4540F4420C8834004F456800146F6DF26
-:100AD000E4800B010204081020408090003FE47E77
-:100AE000019360C1A3FF543F30E509541FFEE49316
-:100AF000A360010ECF54C025E060AD40B880FE8CED
-:100B0000648D658A668B67E4F569EF4E7003021D9C
-:100B100055E4F568E5674566703212072A758390DB
-:100B2000E41207297583C2E41207297583C4E4120D
-:100B30000870702912072A758392E41207297583B9
-:100B4000C6E41207297583C8E4F0801190072612C5
-:100B50000735E41208707005120732E4F0121D55D3
-:100B6000121EBFE5674566703312072A758390E54C
-:100B7000411207297583C2E5411207297583C41202
-:100B8000086E702912072A758392E54012072975AD
-:100B900083C6E5401207297583C8800E9007261288
-:100BA000073512086E7006120732E540F0AF697E15
-:100BB00000AD67AC6612044412072A7583CAE0D3FD
-:100BC0009400500C0568E568C394055003020B14AB
-:100BD000228C608D611208DA7420400D2FF582742A
-:100BE000033EF583E53EF0800B2FF58274033EF55E
-:100BF00083E53CF0E53CD3953E403CE561456070C3
-:100C000010E9120904E53E120768403B120895807E
-:100C100018E53EC39538401D853E38E53E600585A4
-:100C20003F3980038539398F3A120814E53E12079F
-:100C3000C0E53FF0228043E5614560701912075F0F
-:100C4000400512089E802712090B120814E5421273
-:100C500007C0E541F022E53CC39538401D853C388E
-:100C6000E53C6005853D3980038539398F3A1208A6
-:100C700014E53C1207C0E53DF02285383885393946
-:100C8000853A3A120814E5381207C0E539F0227F98
-:100C900006121731121D23120E04120E33E0440AFD
-:100CA000F0748EFE120E04120E0BEFF0E52830E504
-:100CB00003D38001C3400575142080037514081206
-:100CC0000E0475838AE514F0B4FF05751280800662
-:100CD000E514C313F512E4F516F57F121936121355
-:100CE000A3E50AC3940150090516E516C394144000
-:100CF000EAE5E420E728120E047583D2E05408D315
-:100D0000940040047F0180027F00E50AC394014003
-:100D1000047E0180027E00EF5E6003121DD7E57F36
-:100D2000C394114014120E047583D2E04480F0E5A0
-:100D3000E420E70F121DD7800A120E047583D2E05B
-:100D4000547FF0121D2322748A850882F583E517EB
-:100D5000F0120E3AE4F0900702E0120E177583903D
-:100D6000EFF07492FEE5084407FFF5828E83E054AD
-:100D7000C0FD900703E0543F4D8F828E83F09007B3
-:100D800004E0120E17758382EFF0900705E0FFED87
-:100D90004407F5827583B4EF120E03758380E05427
-:100DA000BFF030370A120E91758394E04480F03022
-:100DB000380A120E91758392E04480F0E52830E401
-:100DC0001A20390A120E04758388E0547FF0203A05
-:100DD0000A120E04758388E054BFF0748CFE120E64
-:100DE000048E83E0540F120E03758386E054BFF027
-:100DF000E5084406120DFD75838AE4F022F582753C
-:100E00008382E4F0E5084407F582228E83E0F51042
-:100E100054FEF0E5104401FFE508FDED4407F582BE
-:100E200022E515C45407FFE508FDED4408F5827579
-:100E3000838222758380E04440F0E5084408F5820F
-:100E400075838A22E51625E025E024AFF582E43497
-:100E50001AF583E493F50D2243E11043E18053E159
-:100E6000FD85E11022E51625E025E024B2F582E4B7
-:100E7000341AF583E49322855582855483E515F071
-:100E800022E5E25420D3940022E5E25440D39400BA
-:100E900022E5084406F58222FDE508FBEB4407F550
-:100EA000822253F9F775FE3022EF4E70261207CCDE
-:100EB000E0FD90072612077B1207D8E0FD90072877
-:100EC00012077B120881120772120835E09007247E
-:100ED000120778EF64044E70291207E4E0FD9007D2
-:100EE0002612077B1207F0E0FD90072812077B12FD
-:100EF000088B120772120841E0541FFD900724125C
-:100F0000077BEF64014E70047D0180027D00EF6479
-:100F1000024E70047F0180027F00EF4D60351207A2
-:100F2000FCE0FF900726120789EFF0120808E0FFA7
-:100F3000900728120789EFF012084DE0541FFF12A6
-:100F40000786EFF0120859E0541FFF90072412079C
-:100F500089EFF022E4F553120E8140047F018002F4
-:100F60007F00120E8940047E0180027E00EE4F70E9
-:100F700003020FF685E11043E10253E10F85E11012
-:100F8000E4F551E5E3543FF552120E89401DAD5290
-:100F9000AF51121118EF600885E11043E140800B5A
-:100FA00053E1BF120E5812000680FBE5E3543FF5F3
-:100FB00051E5E4543FF552120E81401DAD52AF5140
-:100FC000121118EF600885E11043E120800B53E116
-:100FD000DF120E5812000680FB120E8140047F01C2
-:100FE00080027F00120E8940047E0180027E00EEA6
-:100FF0004F6003120E5B22120E21EFF012109122AD
-:1010000002110002104002109000000000000000D9
-:1010100001200120E4F5571216BD121644E4121007
-:10102000561214B7900726120735E4120731E4F080
-:101030001210561214B7900726120735E541120711
-:1010400031E540F0AF577E00AD567C00120444AF4E
-:10105000567E000211EEFF900720A3E0FDE4F55656
-:10106000F540FEFCAB56FA1211517F0F7D18E4F5E6
-:1010700056F540FEFCAB56FA121541AF567E0012F3
-:101080001AFFE4FFF5567D1FF540FEFCAB56FA2231
-:1010900022E4F555E508FD74A0F556ED4407F55733
-:1010A000E52830E503D38001C340057F28EF8004A5
-:1010B0007F14EFC313F554E4F9120E1875838EE014
-:1010C000F510CEEFCEEED394004026E51054FE127C
-:1010D0000E9875838EEDF0E5104401FDEB4407F5A5
-:1010E00082EDF0855782855683E030E301091E804A
-:1010F000D4C234E9C395544002D2342202000622FD
-:10110000303011901000E493F510901010E493F536
-:101110001012109012115022E4FCC3ED9FFAEFF56B
-:101120008375820079FFE493CC6CCCA3D9F8DAF60E
-:10113000E5E230E4028CE5ED24FFFFEF7582FFF578
-:1011400083E4936C70037F01227F00222211000050
-:10115000228E588F598C5A8D5B8A5C8B5D755E012F
-:10116000E4F55FF560F56212072A7583D0E0FFC4ED
-:10117000540FF561121EA585595ED3E55E955BE5BA
-:101180005A12076B504B1207037583BCE0455E1281
-:1011900007297583BEE0455E1207297583C0E045C7
-:1011A0005EF0AF5FE560120878120AFFAF627E0062
-:1011B000AD5DAC5C120444E561AF5E7E00B4030536
-:1011C000121E218007AD5DAC5C121317055E021183
-:1011D0007A1207037583BCE045401207297583BE68
-:1011E000E045401207297583C0E04540F0228E5843
-:1011F0008F59755A017901755B01E4FB12072A7555
-:1012000083AEE0541AFF120865E0C4135407FEEFE2
-:10121000700CEE6535700790072FE0B4010DAF3507
-:101220007E00120EA9CFEBCF021E60E55964024585
-:101230005870047F0180027F00E559455870047E94
-:101240000180027E00EE4F602385414985404BE5D9
-:10125000594558702CAF5AFECDE9CDFCAB59AA5870
-:10126000120AFFAF5B7E00121E608015AF5B7E002E
-:10127000121E60900726120735E549120731E54B2B
-:10128000F0E4FDAF35FEFC120915228C648D651269
-:1012900008DA403CE56545647010120904C3E53E78
-:1012A000120769403B1208958018E53EC395384007
-:1012B0001D853E38E53E6005853F39800385393917
-:1012C0008F3A1207A8E53E120753E53FF022803B14
-:1012D000E5654564701112075F400512089E801F86
-:1012E00012073EE541F022E53CC39538401D853CA0
-:1012F00038E53C6005853D3980038539398F3A12E0
-:1013000007A8E53C120753E53DF02212079FE53898
-:10131000120753E539F0228C638D641208DA403CE1
-:10132000E56445637010120904C3E53E1207694085
-:101330003B1208958018E53EC39538401D853E3820
-:10134000E53E6005853F3980038539398F3A1207BC
-:10135000A8E53E120753E53FF022803BE564456374
-:10136000701112075F400512089E801F12073EE5AC
-:1013700041F022E53CC39538401D853C38E53C6092
-:1013800005853D3980038539398F3A1207A8E53C38
-:10139000120753E53DF02212079FE538120753E587
-:1013A00039F022E50DFEE5088E544405F555751516
-:1013B0000FF582120E7A1217A320310575150380DE
-:1013C0000375150BE50AC39401503812142020311F
-:1013D0000605150515800415151515E50AC39401B4
-:1013E0005021121420203104051580021515E50A3C
-:1013F000C39401500E120E771217A3203105051564
-:10140000120E77E515B408047F0180027F00E51510
-:10141000B407047E0180027E00EE4F6002057F2249
-:10142000855582855483E515F01217A32212072AE9
-:101430007583AE74FF120729E0541AF534E0C41323
-:101440005407F53524FE602424FE603C24047063B8
-:1014500075312DE508FD74B612079274BC90072211
-:1014600012079574901207B37492803C75313AE577
-:1014700008FD74BA12079274C09007221207B6745E
-:10148000C41207B374C88020753135E508FD74B8FF
-:1014900012079274BEFFED4407900722CFF0A3EF2E
-:1014A000F074C21207B374C6FFED4407A3CFF0A3D4
-:1014B000EFF022753401228E588F598C5A8D5B8A39
-:1014C0005C8B5D755E01E4F55F121EA585595ED3E8
-:1014D000E55E955BE55A12076B5057E55D455C701C
-:1014E0003012072A758392E55E1207297583C6E5D7
-:1014F0005E1207297583C8E55E120729758390E59A
-:101500005E1207297583C2E55E1207297583C480C0
-:1015100003120732E55EF0AF5F7E00AD5DAC5C129A
-:101520000444AF5E7E00AD5DAC5C120BD1055E0283
-:1015300014CFAB5DAA5CAD5BAC5AAF59AE58021B81
-:10154000FB8C5C8D5D8A5E8B5F756001E4F561F5F7
-:1015500062F563121EA58F60D3E560955DE55C12B0
-:10156000076B5061E55F455E702712072A7583B6E9
-:10157000E5601207297583B8E5601207297583BAFB
-:10158000E560F0AF617E00E56212087A120AFF8022
-:1015900019900724120735E56012072975838EE438
-:1015A0001207297401120729E4F0AF637E00AD5FD2
-:1015B000AC5E120444AF607E00AD5FAC5E12128B75
-:1015C00005600215582290114DE49390072EF012F9
-:1015D000081F7583AEE0541AF5347067EF4407F5C1
-:1015E000827583CEE0FF1313135407F536540FD3DF
-:1015F0009400400612142D121BA9E536540F24FE48
-:10160000600C14600C146019240370378010021EE3
-:1016100091121E9112072A7583CEE054EFF0021D3D
-:10162000AE121014E4F555121D850555E555C39409
-:101630000540F412072A7583CEE054C7120729E04B
-:101640004408F022E4F558F559AF08EF4407F58255
-:101650007583D0E0FDC4540FF55AEF4407F5827549
-:1016600083807401F0120821758382E545F0EF4410
-:1016700007F58275838A74FFF0121A4D12072A75D6
-:1016800083BCE054EF1207297583BEE054EF1207C4
-:10169000297583C0E054EF1207297583BCE044101C
-:1016A0001207297583BEE044101207297583C0E034
-:1016B0004410F0AF58E559120878020AFFE4F558D3
-:1016C0007D01F559AF35FEFC12091512072A758305
-:1016D000B674101207297583B87410120729758320
-:1016E000BA74101207297583BC7410120729758308
-:1016F000BE74101207297583C074101207297583F0
-:1017000090E41207297583C2E41207297583C4E4A3
-:10171000120729758392E41207297583C6E412071C
-:10172000297583C8E4F0AF58FEE55912087A020A19
-:10173000FFE5E230E46CE5E754C064407064E5091D
-:10174000C45430FEE50825E025E054C04EFEEF54B9
-:101750003F4EFDE52BAE2A7802C333CE33CED8F907
-:10176000F5828E83EDF0E52BAE2A7802C333CE33BB
-:10177000CED8F9FFF5828E83A3E5FEF08F828E83AB
-:10178000A3A3E5FDF08F828E83A3A3A3E5FCF0C3A2
-:10179000E52B94FAE52A94005008052BE52B7002FE
-:1017A000052A22E4FFE4F558F556F5577482FC1239
-:1017B0000E048C83E0F510547FF0E5104480120E87
-:1017C00098EDF07E0A120E047583A0E020E026DE7C
-:1017D000F40557E55770020556E5142401FDE4337E
-:1017E000FCD3E5579DE5569C40D9E50A942050026C
-:1017F000050A43E108C231120E047583A6E05512B2
-:1018000065127003D23122C23122900726E0FAA37A
-:10181000E0F5828A83E0F541E539C395414026E54C
-:10182000399541C39FEE12076B40047C0180027C16
-:1018300000E541643F60047B0180027B00EC5B605B
-:101840002905418028C3E5419539C39FEE12076BF6
-:1018500040047F0180027F00E54160047E01800238
-:101860007E00EF5E600415418003853941853A4072
-:1018700022E5E230E460E5E130E25BE50970047FF7
-:101880000180027F00E50870047E0180027E00EE88
-:101890005F604353F9F8E5E230E43BE5E130E22EE6
-:1018A00043FA0253FAFBE4F510909470E510F0E56A
-:1018B000E130E2E7909470E06510600343FA0405BC
-:1018C00010909470E510F070E612000680E153FA73
-:1018D000FD53FAFB80C0228F54120006E5E130E090
-:1018E000047F0180027F00E57ED3940540047E01E1
-:1018F00080027E00EE4F603D855411E5E220E1322A
-:1019000074CE121A0530E7047D0180027D008F82BB
-:101910008E83E030E6047F0180027F00EF5D70156A
-:101920001215C674CE121A0530E607E04480F04363
-:10193000F98012187122120E44E51625E025E024E4
-:10194000B0F582E4341AF583E493F50FE51625E04B
-:1019500025E024B1F582E4341AF583E493F50E1200
-:101960000E65F510E50F54F0120E1775838CEFF02D
-:10197000E50F30E00C120E04758386E04440F080E1
-:101980000A120E04758386E054BFF0120E9175831F
-:1019900082E50EF0227F05121731120E04120E336B
-:1019A0007402F0748EFE120E04120E0BEFF0751519
-:1019B00070120FF72034057515108003751550123D
-:1019C0000FF72034047410800274F02515F51512F9
-:1019D0000E21EFF0121091203417E5156430600CE1
-:1019E00074102515F515B48003E4F515120E21EFDA
-:1019F000F022F0E50B25E025E02482F582E43407AF
-:101A0000F583227488FEE5084407FFF5828E83E0A3
-:101A100022F0E5084407F58222F0E054C08F828E60
-:101A200083F022EF4407F582758386E05410D39447
-:101A30000022F0900715E004F0224406F582758339
-:101A40009EE022FEEF4407F5828E83E022E49007B9
-:101A50002AF0A3F012072A758382E0547F12072927
-:101A6000E04480F01210FC12081F7583A0E020E013
-:101A70001A90072BE004F0700690072AE004F0901B
-:101A8000072AE0B410E1A3E0B400DCEE44A6FCEFCA
-:101A90004407F5828C83E0F532EE44A8FEEF44075C
-:101AA000F5828E83E0F5332201201100042000909E
-:101AB00000200F9200210F9400220F9600230F9810
-:101AC00000240F9A00250F9C00260F9E00270FA0D0
-:101AD000012001A2012101A4012201A6012301A8E4
-:101AE000012401AA012501AC012601AE012701B0A4
-:101AF000012801B400280FB640280FB8612801CB97
-:101B0000EFCBCAEECA7F01E4FDEB4A7024E508F58D
-:101B10008274B6120829E508F58274B8120829E51E
-:101B200008F58274BA1208297E007C00120AFF8030
-:101B300012900726120735E541F090072412073569
-:101B4000E540F012072A75838EE41207297401120A
-:101B50000729E4F022E4F526F52753E1FEF52A757E
-:101B60002B01F5087F0112173130301C901AA9E4BF
-:101B700093F510901FF9E493F510900041E493F56C
-:101B800010901ECAE493F5107F02121731120F5401
-:101B90007F03121731120006E5E230E70912100048
-:101BA00030300312110002004712081F7583D0E085
-:101BB000C4540FFD7543017544FF1208AA7404F064
-:101BC000753B01ED14600C14600B14600F2403705E
-:101BD0000B800980001208A704F080061208A77481
-:101BE00004F0EE4482FEEF4407F5828E83E5451251
-:101BF00008BE758382E531F002114C8E608F611250
-:101C00001EA5E4FFCEEDCEEED39561E56012076B25
-:101C1000403974202EF582E43403F583E07003FF2D
-:101C200080261208E2FDC39F401ECFEDCFEB4A7025
-:101C30000B8D421208EEF5418E40800C1208E2F541
-:101C4000381208EEF5398E3A1E80BC22755801E52F
-:101C500035700C1207CCE0F54A1207D8E0F54CE5D8
-:101C600035B4040C1207E4E0F54A1207F0E0F54C35
-:101C7000E535B401047F0180027F00E535B402043C
-:101C80007E0180027E00EE4F600C1207FCE0F54AF8
-:101C9000120808E0F54C85414985404B22755B01EF
-:101CA000900724120735E0541FFFD3940250048F8D
-:101CB000588005EF24FEF558EFC394184005755978
-:101CC000188004EF04F55985435AAF587E00AD598A
-:101CD0007C00AB5B7A00121541AF5A7E0012180AE5
-:101CE000AF5B7E00021AFFE5E230E70E121003C27E
-:101CF000303030031210FF203328E5E730E70512BB
-:101D00000EA2800DE5FEC394205006120EA243F9E8
-:101D100008E5F230E70353F97FE5F15470D39400FE
-:101D200050D822120E04758380E4F0E508440712AF
-:101D30000DFD758384120E02758386120E02758363
-:101D40008CE054F3120E0375838E120E0275839489
-:101D5000E054FBF02212072A75838EE412072974DF
-:101D600001120729E41208BE75838CE04420120892
-:101D7000BEE054DFF07484850882F583E0547FF080
-:101D8000E04480F022755601E4FDF557AF35FEFCC6
-:101D9000120915121C9D121E7A121C4CAF577E00A0
-:101DA000AD567C00120444AF567E000211EE75560B
-:101DB00001E4FDF557AF35FEFC120915121C9D120A
-:101DC0001E7A121C4CAF577E00AD567C00120444A4
-:101DD000AF567E000211EEE4F516120E44FEE50841
-:101DE0004405FF120E658F828E83F00516E516C33B
-:101DF000941440E6E508120E2BE4F022E4F558F5C1
-:101E000059F55AFFFEAD58FC1209157F047E00AD4E
-:101E1000587C001209157F027E00AD587C00020933
-:101E200015E53C253EFCE5422400FBE433FAECC317
-:101E30009BEA12076B400B8C42E53D253FF5418F35
-:101E4000402212090B227484F5188508198519821D
-:101E5000851883E0547FF0E04480F0E04480F02275
-:101E6000EF4E700B12072A7583D2E054DFF0221276
-:101E7000072A7583D2E04420F02275580190072686
-:101E8000120735E0543FF541120732E0543FF54068
-:101E900022755602E4F557121DFCAF577E00AD5671
-:101EA0007C00020444E4F542F541F540F538F5398B
-:101EB000F53A22EF5407FFE5F954F84FF5F9227F80
-:101EC00001E4FE0F0EBEFFFB2201200001042000F2
-:101ED0000000000000000000000000000000000002
-:101EE00000000000000000000000000000000000F2
-:101EF00000000000000000000000000000000000E2
-:101F000000000000000000000000000000000000D1
-:101F100000000000000000000000000000000000C1
-:101F200000000000000000000000000000000000B1
-:101F300000000000000000000000000000000000A1
-:101F40000000000000000000000000000000000091
-:101F50000000000000000000000000000000000081
-:101F60000000000000000000000000000000000071
-:101F70000000000000000000000000000000000061
-:101F80000000000000000000000000000000000051
-:101F90000000000000000000000000000000000041
-:101FA0000000000000000000000000000000000031
-:101FB0000000000000000000000000000000000021
-:101FC0000000000000000000000000000000000011
-:101FD0000000000000000000000000000000000001
-:101FE00000000000000000000000000000000000F1
-:101FF000000000000000000001201100042000810A
-:00000001FF
if (tree_mod_dont_log(fs_info, NULL))
return 0;
+ __tree_mod_log_free_eb(fs_info, old_root);
+
ret = tree_mod_alloc(fs_info, flags, &tm);
if (ret < 0)
goto out;
static noinline void
tree_mod_log_eb_copy(struct btrfs_fs_info *fs_info, struct extent_buffer *dst,
struct extent_buffer *src, unsigned long dst_offset,
- unsigned long src_offset, int nr_items)
+ unsigned long src_offset, int nr_items, int log_removal)
{
int ret;
int i;
}
for (i = 0; i < nr_items; i++) {
- ret = tree_mod_log_insert_key_locked(fs_info, src,
- i + src_offset,
- MOD_LOG_KEY_REMOVE);
- BUG_ON(ret < 0);
+ if (log_removal) {
+ ret = tree_mod_log_insert_key_locked(fs_info, src,
+ i + src_offset,
+ MOD_LOG_KEY_REMOVE);
+ BUG_ON(ret < 0);
+ }
ret = tree_mod_log_insert_key_locked(fs_info, dst,
i + dst_offset,
MOD_LOG_KEY_ADD);
ret = btrfs_dec_ref(trans, root, buf, 1, 1);
BUG_ON(ret); /* -ENOMEM */
}
- tree_mod_log_free_eb(root->fs_info, buf);
clean_tree_block(trans, root, buf);
*last_ref = 1;
}
btrfs_set_node_ptr_generation(parent, parent_slot,
trans->transid);
btrfs_mark_buffer_dirty(parent);
+ tree_mod_log_free_eb(root->fs_info, buf);
btrfs_free_tree_block(trans, root, buf, parent_start,
last_ref);
}
goto enospc;
}
- tree_mod_log_free_eb(root->fs_info, root->node);
tree_mod_log_set_root_pointer(root, child);
rcu_assign_pointer(root->node, child);
push_items = min(src_nritems - 8, push_items);
tree_mod_log_eb_copy(root->fs_info, dst, src, dst_nritems, 0,
- push_items);
+ push_items, 1);
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(dst_nritems),
btrfs_node_key_ptr_offset(0),
sizeof(struct btrfs_key_ptr));
tree_mod_log_eb_copy(root->fs_info, dst, src, 0,
- src_nritems - push_items, push_items);
+ src_nritems - push_items, push_items, 1);
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(src_nritems - push_items),
int mid;
int ret;
u32 c_nritems;
+ int tree_mod_log_removal = 1;
c = path->nodes[level];
WARN_ON(btrfs_header_generation(c) != trans->transid);
if (c == root->node) {
/* trying to split the root, lets make a new one */
ret = insert_new_root(trans, root, path, level + 1);
+ /*
+ * removal of root nodes has been logged by
+ * tree_mod_log_set_root_pointer due to locking
+ */
+ tree_mod_log_removal = 0;
if (ret)
return ret;
} else {
(unsigned long)btrfs_header_chunk_tree_uuid(split),
BTRFS_UUID_SIZE);
- tree_mod_log_eb_copy(root->fs_info, split, c, 0, mid, c_nritems - mid);
+ tree_mod_log_eb_copy(root->fs_info, split, c, 0, mid, c_nritems - mid,
+ tree_mod_log_removal);
copy_extent_buffer(split, c,
btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(mid),
0, objectid, NULL, 0, 0, 0);
if (IS_ERR(leaf)) {
ret = PTR_ERR(leaf);
+ leaf = NULL;
goto fail;
}
btrfs_tree_unlock(leaf);
+ return root;
+
fail:
- if (ret)
- return ERR_PTR(ret);
+ if (leaf) {
+ btrfs_tree_unlock(leaf);
+ free_extent_buffer(leaf);
+ }
+ kfree(root);
- return root;
+ return ERR_PTR(ret);
}
static struct btrfs_root *alloc_log_tree(struct btrfs_trans_handle *trans,
if (btrfs_root_refs(&root->root_item) == 0)
synchronize_srcu(&fs_info->subvol_srcu);
- if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
+ if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
btrfs_free_log(NULL, root);
btrfs_free_log_root_tree(NULL, fs_info);
}
cache->bytes_super += stripe_len;
ret = add_excluded_extent(root, cache->key.objectid,
stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret)
+ return ret;
}
for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
cache->key.objectid, bytenr,
0, &logical, &nr, &stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret)
+ return ret;
while (nr--) {
cache->bytes_super += stripe_len;
ret = add_excluded_extent(root, logical[nr],
stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret) {
+ kfree(logical);
+ return ret;
+ }
}
kfree(logical);
if (ret && !insert) {
err = -ENOENT;
goto out;
+ } else if (ret) {
+ err = -EIO;
+ WARN_ON(1);
+ goto out;
}
- BUG_ON(ret); /* Corruption */
leaf = path->nodes[0];
item_size = btrfs_item_size_nr(leaf, path->slots[0]);
spin_lock(&sinfo->lock);
spin_lock(&block_rsv->lock);
- block_rsv->size = num_bytes;
+ block_rsv->size = min_t(u64, num_bytes, 512 * 1024 * 1024);
num_bytes = sinfo->bytes_used + sinfo->bytes_pinned +
sinfo->bytes_reserved + sinfo->bytes_readonly +
* If the inodes csum_bytes is the same as the original
* csum_bytes then we know we haven't raced with any free()ers
* so we can just reduce our inodes csum bytes and carry on.
- * Otherwise we have to do the normal free thing to account for
- * the case that the free side didn't free up its reserve
- * because of this outstanding reservation.
*/
- if (BTRFS_I(inode)->csum_bytes == csum_bytes)
+ if (BTRFS_I(inode)->csum_bytes == csum_bytes) {
calc_csum_metadata_size(inode, num_bytes, 0);
- else
- to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+ } else {
+ u64 orig_csum_bytes = BTRFS_I(inode)->csum_bytes;
+ u64 bytes;
+
+ /*
+ * This is tricky, but first we need to figure out how much we
+ * free'd from any free-ers that occured during this
+ * reservation, so we reset ->csum_bytes to the csum_bytes
+ * before we dropped our lock, and then call the free for the
+ * number of bytes that were freed while we were trying our
+ * reservation.
+ */
+ bytes = csum_bytes - BTRFS_I(inode)->csum_bytes;
+ BTRFS_I(inode)->csum_bytes = csum_bytes;
+ to_free = calc_csum_metadata_size(inode, bytes, 0);
+
+
+ /*
+ * Now we need to see how much we would have freed had we not
+ * been making this reservation and our ->csum_bytes were not
+ * artificially inflated.
+ */
+ BTRFS_I(inode)->csum_bytes = csum_bytes - num_bytes;
+ bytes = csum_bytes - orig_csum_bytes;
+ bytes = calc_csum_metadata_size(inode, bytes, 0);
+
+ /*
+ * Now reset ->csum_bytes to what it should be. If bytes is
+ * more than to_free then we would have free'd more space had we
+ * not had an artificially high ->csum_bytes, so we need to free
+ * the remainder. If bytes is the same or less then we don't
+ * need to do anything, the other free-ers did the correct
+ * thing.
+ */
+ BTRFS_I(inode)->csum_bytes = orig_csum_bytes - num_bytes;
+ if (bytes > to_free)
+ to_free = bytes - to_free;
+ else
+ to_free = 0;
+ }
spin_unlock(&BTRFS_I(inode)->lock);
if (dropped)
to_free += btrfs_calc_trans_metadata_size(root, dropped);
* info has super bytes accounted for, otherwise we'll think
* we have more space than we actually do.
*/
- exclude_super_stripes(root, cache);
+ ret = exclude_super_stripes(root, cache);
+ if (ret) {
+ /*
+ * We may have excluded something, so call this just in
+ * case.
+ */
+ free_excluded_extents(root, cache);
+ kfree(cache->free_space_ctl);
+ kfree(cache);
+ goto error;
+ }
/*
* check for two cases, either we are full, and therefore
cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
- exclude_super_stripes(root, cache);
+ ret = exclude_super_stripes(root, cache);
+ if (ret) {
+ /*
+ * We may have excluded something, so call this just in
+ * case.
+ */
+ free_excluded_extents(root, cache);
+ kfree(cache->free_space_ctl);
+ kfree(cache);
+ return ret;
+ }
add_new_free_space(cache, root->fs_info, chunk_offset,
chunk_offset + size);
GFP_NOFS);
}
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+ unsigned long index = start >> PAGE_CACHE_SHIFT;
+ unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+ struct page *page;
+
+ while (index <= end_index) {
+ page = find_get_page(inode->i_mapping, index);
+ BUG_ON(!page); /* Pages should be in the extent_io_tree */
+ clear_page_dirty_for_io(page);
+ page_cache_release(page);
+ index++;
+ }
+ return 0;
+}
+
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+ unsigned long index = start >> PAGE_CACHE_SHIFT;
+ unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+ struct page *page;
+
+ while (index <= end_index) {
+ page = find_get_page(inode->i_mapping, index);
+ BUG_ON(!page); /* Pages should be in the extent_io_tree */
+ account_page_redirty(page);
+ __set_page_dirty_nobuffers(page);
+ page_cache_release(page);
+ index++;
+ }
+ return 0;
+}
+
/*
* helper function to set both pages and extents in the tree writeback
*/
unsigned long *map_len);
int extent_range_uptodate(struct extent_io_tree *tree,
u64 start, u64 end);
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end);
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end);
int extent_clear_unlock_delalloc(struct inode *inode,
struct extent_io_tree *tree,
u64 start, u64 end, struct page *locked_page,
csums_in_item = btrfs_item_size_nr(leaf, path->slots[0]);
csums_in_item /= csum_size;
- if (csum_offset >= csums_in_item) {
+ if (csum_offset == csums_in_item) {
ret = -EFBIG;
goto fail;
+ } else if (csum_offset > csums_in_item) {
+ goto fail;
}
}
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_csum_item);
return -ENOMEM;
sector_sum = sums->sums;
- trans->adding_csums = 1;
again:
next_offset = (u64)-1;
found_next = 0;
goto again;
}
out:
- trans->adding_csums = 0;
btrfs_free_path(path);
return ret;
}
compressed = test_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
clear_bit(EXTENT_FLAG_PINNED, &em->flags);
+ clear_bit(EXTENT_FLAG_LOGGING, &flags);
remove_extent_mapping(em_tree, em);
if (no_splits)
goto next;
{
struct inode *inode = file_inode(file);
struct extent_state *cached_state = NULL;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
u64 cur_offset;
u64 last_byte;
u64 alloc_start;
ret = btrfs_check_data_free_space(inode, alloc_end - alloc_start);
if (ret)
return ret;
+ if (root->fs_info->quota_enabled) {
+ ret = btrfs_qgroup_reserve(root, alloc_end - alloc_start);
+ if (ret)
+ goto out_reserve_fail;
+ }
/*
* wait for ordered IO before we have any locks. We'll loop again
&cached_state, GFP_NOFS);
out:
mutex_unlock(&inode->i_mutex);
+ if (root->fs_info->quota_enabled)
+ btrfs_qgroup_free(root, alloc_end - alloc_start);
+out_reserve_fail:
/* Let go of our reservation. */
btrfs_free_reserved_data_space(inode, alloc_end - alloc_start);
return ret;
int i;
int will_compress;
int compress_type = root->fs_info->compress_type;
+ int redirty = 0;
/* if this is a small write inside eof, kick off a defrag */
if ((end - start + 1) < 16 * 1024 &&
if (BTRFS_I(inode)->force_compress)
compress_type = BTRFS_I(inode)->force_compress;
+ /*
+ * we need to call clear_page_dirty_for_io on each
+ * page in the range. Otherwise applications with the file
+ * mmap'd can wander in and change the page contents while
+ * we are compressing them.
+ *
+ * If the compression fails for any reason, we set the pages
+ * dirty again later on.
+ */
+ extent_range_clear_dirty_for_io(inode, start, end);
+ redirty = 1;
ret = btrfs_compress_pages(compress_type,
inode->i_mapping, start,
total_compressed, pages,
__set_page_dirty_nobuffers(locked_page);
/* unlocked later on in the async handlers */
}
+ if (redirty)
+ extent_range_redirty_for_io(inode, start, end);
add_async_extent(async_cow, start, end - start + 1,
0, NULL, 0, BTRFS_COMPRESS_NONE);
*num_added += 1;
struct btrfs_ordered_sum *sum;
list_for_each_entry(sum, list, list) {
+ trans->adding_csums = 1;
btrfs_csum_file_blocks(trans,
BTRFS_I(inode)->root->fs_info->csum_root, sum);
+ trans->adding_csums = 0;
}
return 0;
}
key.type = BTRFS_EXTENT_DATA_KEY;
key.offset = start;
+ path->leave_spinning = 1;
if (merge) {
struct btrfs_file_extent_item *fi;
u64 extent_len;
btrfs_mark_buffer_dirty(leaf);
inode_add_bytes(inode, len);
+ btrfs_release_path(path);
ret = btrfs_inc_extent_ref(trans, root, new->bytenr,
new->disk_len, 0,
ret = 1;
out_free_path:
btrfs_release_path(path);
+ path->leave_spinning = 0;
btrfs_end_transaction(trans, root);
out_unlock:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lock_start, lock_end,
* 1 for the dir item
* 1 for the dir index
* 1 for the inode ref
- * 1 for the inode ref in the tree log
- * 2 for the dir entries in the log
* 1 for the inode
*/
- trans = btrfs_start_transaction(root, 8);
+ trans = btrfs_start_transaction(root, 5);
if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
return trans;
* inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items
* should cover the worst case number of items we'll modify.
*/
- trans = btrfs_start_transaction(root, 20);
+ trans = btrfs_start_transaction(root, 11);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out_notrans;
void btrfs_tree_lock(struct extent_buffer *eb);
void btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_try_spin_lock(struct extent_buffer *eb);
void btrfs_tree_read_lock(struct extent_buffer *eb);
void btrfs_tree_read_unlock(struct extent_buffer *eb);
INIT_LIST_HEAD(&splice);
INIT_LIST_HEAD(&works);
+ mutex_lock(&root->fs_info->ordered_operations_mutex);
spin_lock(&root->fs_info->ordered_extent_lock);
list_splice_init(&root->fs_info->ordered_extents, &splice);
while (!list_empty(&splice)) {
cond_resched();
}
+ mutex_unlock(&root->fs_info->ordered_operations_mutex);
}
/*
ret = btrfs_find_all_roots(trans, fs_info, node->bytenr,
sgn > 0 ? node->seq - 1 : node->seq, &roots);
if (ret < 0)
- goto out;
+ return ret;
spin_lock(&fs_info->qgroup_lock);
quota_root = fs_info->quota_root;
ret = 0;
unlock:
spin_unlock(&fs_info->qgroup_lock);
-out:
ulist_free(roots);
ulist_free(tmp);
if ((qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_RFER) &&
qg->reserved + qg->rfer + num_bytes >
- qg->max_rfer)
+ qg->max_rfer) {
ret = -EDQUOT;
+ goto out;
+ }
if ((qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_EXCL) &&
qg->reserved + qg->excl + num_bytes >
- qg->max_excl)
+ qg->max_excl) {
ret = -EDQUOT;
+ goto out;
+ }
list_for_each_entry(glist, &qg->groups, next_group) {
ulist_add(ulist, glist->group->qgroupid,
(uintptr_t)glist->group, GFP_ATOMIC);
}
}
- if (ret)
- goto out;
/*
* no limits exceeded, now record the reservation into all qgroups
eb = path->nodes[0];
ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
item_size = btrfs_item_size_nr(eb, path->slots[0]);
- btrfs_release_path(path);
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
do {
ret < 0 ? -1 : ref_level,
ret < 0 ? -1 : ref_root);
} while (ret != 1);
+ btrfs_release_path(path);
} else {
+ btrfs_release_path(path);
swarn.path = path;
swarn.dev = dev;
iterate_extent_inodes(fs_info, found_key.objectid,
found_key.type != key.type) {
key.offset += right_len;
break;
- } else {
- if (found_key.offset != key.offset + right_len) {
- /* Should really not happen */
- ret = -EIO;
- goto out;
- }
+ }
+ if (found_key.offset != key.offset + right_len) {
+ ret = 0;
+ goto out;
}
key = found_key;
}
btrfs_trans_release_metadata(trans, root);
trans->block_rsv = NULL;
- /*
- * the same root has to be passed to start_transaction and
- * end_transaction. Subvolume quota depends on this.
- */
- WARN_ON(trans->root != root);
if (trans->qgroup_reserved) {
- btrfs_qgroup_free(root, trans->qgroup_reserved);
+ /*
+ * the same root has to be passed here between start_transaction
+ * and end_transaction. Subvolume quota depends on this.
+ */
+ btrfs_qgroup_free(trans->root, trans->qgroup_reserved);
trans->qgroup_reserved = 0;
}
__btrfs_close_devices(fs_devices);
free_fs_devices(fs_devices);
}
+ /*
+ * Wait for rcu kworkers under __btrfs_close_devices
+ * to finish all blkdev_puts so device is really
+ * free when umount is done.
+ */
+ rcu_barrier();
return ret;
}
em = lookup_extent_mapping(em_tree, chunk_start, 1);
read_unlock(&em_tree->lock);
- BUG_ON(!em || em->start != chunk_start);
+ if (!em) {
+ printk(KERN_ERR "btrfs: couldn't find em for chunk %Lu\n",
+ chunk_start);
+ return -EIO;
+ }
+
+ if (em->start != chunk_start) {
+ printk(KERN_ERR "btrfs: bad chunk start, em=%Lu, wanted=%Lu\n",
+ em->start, chunk_start);
+ free_extent_map(em);
+ return -EIO;
+ }
map = (struct map_lookup *)em->bdev;
length = em->len;
}
}
- /* mechlistMIC */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- /* Check if we have reached the end of the blob, but with
- no mechListMic (e.g. NTLMSSP instead of KRB5) */
- if (ctx.error == ASN1_ERR_DEC_EMPTY)
- goto decode_negtoken_exit;
- cFYI(1, "Error decoding last part negTokenInit exit3");
- return 0;
- } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
- /* tag = 3 indicating mechListMIC */
- cFYI(1, "Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- return 0;
- }
-
- /* sequence */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- cFYI(1, "Error decoding last part negTokenInit exit5");
- return 0;
- } else if ((cls != ASN1_UNI) || (con != ASN1_CON)
- || (tag != ASN1_SEQ)) {
- cFYI(1, "cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- }
-
- /* sequence of */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- cFYI(1, "Error decoding last part negTokenInit exit 7");
- return 0;
- } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
- cFYI(1, "Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- return 0;
- }
-
- /* general string */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- cFYI(1, "Error decoding last part negTokenInit exit9");
- return 0;
- } else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
- || (tag != ASN1_GENSTR)) {
- cFYI(1, "Exit10 cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- return 0;
- }
- cFYI(1, "Need to call asn1_octets_decode() function for %s",
- ctx.pointer); /* is this UTF-8 or ASCII? */
-decode_negtoken_exit:
+ /*
+ * We currently ignore anything at the end of the SPNEGO blob after
+ * the mechTypes have been parsed, since none of that info is
+ * used at the moment.
+ */
return 1;
}
__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE];
#endif
+/*
+ * Bumps refcount for cifs super block.
+ * Note that it should be only called if a referece to VFS super block is
+ * already held, e.g. in open-type syscalls context. Otherwise it can race with
+ * atomic_dec_and_test in deactivate_locked_super.
+ */
+void
+cifs_sb_active(struct super_block *sb)
+{
+ struct cifs_sb_info *server = CIFS_SB(sb);
+
+ if (atomic_inc_return(&server->active) == 1)
+ atomic_inc(&sb->s_active);
+}
+
+void
+cifs_sb_deactive(struct super_block *sb)
+{
+ struct cifs_sb_info *server = CIFS_SB(sb);
+
+ if (atomic_dec_and_test(&server->active))
+ deactivate_super(sb);
+}
+
static int
cifs_read_super(struct super_block *sb)
{
.kill_sb = cifs_kill_sb,
/* .fs_flags */
};
+MODULE_ALIAS_FS("cifs");
const struct inode_operations cifs_dir_inode_ops = {
.create = cifs_create,
.atomic_open = cifs_atomic_open,
extern const struct address_space_operations cifs_addr_ops;
extern const struct address_space_operations cifs_addr_ops_smallbuf;
+/* Functions related to super block operations */
+extern void cifs_sb_active(struct super_block *sb);
+extern void cifs_sb_deactive(struct super_block *sb);
+
/* Functions related to inodes */
extern const struct inode_operations cifs_dir_inode_ops;
extern struct inode *cifs_root_iget(struct super_block *);
INIT_WORK(&cfile->oplock_break, cifs_oplock_break);
mutex_init(&cfile->fh_mutex);
+ cifs_sb_active(inode->i_sb);
+
/*
* If the server returned a read oplock and we have mandatory brlocks,
* set oplock level to None.
struct cifs_tcon *tcon = tlink_tcon(cifs_file->tlink);
struct TCP_Server_Info *server = tcon->ses->server;
struct cifsInodeInfo *cifsi = CIFS_I(inode);
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct super_block *sb = inode->i_sb;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifsLockInfo *li, *tmp;
struct cifs_fid fid;
struct cifs_pending_open open;
cifs_put_tlink(cifs_file->tlink);
dput(cifs_file->dentry);
+ cifs_sb_deactive(sb);
kfree(cifs_file);
}
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc != 0) {
- rc = -ETXTBSY;
+ rc = -EBUSY;
goto undo_setattr;
}
if (rc == -ENOENT)
rc = 0;
else if (rc != 0) {
- rc = -ETXTBSY;
+ rc = -EBUSY;
goto undo_rename;
}
cifsInode->delete_pending = true;
cifs_drop_nlink(inode);
} else if (rc == -ENOENT) {
d_drop(dentry);
- } else if (rc == -ETXTBSY) {
+ } else if (rc == -EBUSY) {
if (server->ops->rename_pending_delete) {
rc = server->ops->rename_pending_delete(full_path,
dentry, xid);
if (rc == 0)
cifs_drop_nlink(inode);
}
- if (rc == -ETXTBSY)
- rc = -EBUSY;
} else if ((rc == -EACCES) && (dosattr == 0) && inode) {
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (attrs == NULL) {
* source. Note that cross directory moves do not work with
* rename by filehandle to various Windows servers.
*/
- if (rc == 0 || rc != -ETXTBSY)
+ if (rc == 0 || rc != -EBUSY)
goto do_rename_exit;
/* open-file renames don't work across directories */
{ERRdiffdevice, -EXDEV},
{ERRnofiles, -ENOENT},
{ERRwriteprot, -EROFS},
- {ERRbadshare, -ETXTBSY},
+ {ERRbadshare, -EBUSY},
{ERRlock, -EACCES},
{ERRunsup, -EINVAL},
{ERRnosuchshare, -ENXIO},
}
*ret_pointer = iov;
+ ret = -EFAULT;
+ if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
+ goto out;
+
/*
* Single unix specification:
* We should -EINVAL if an element length is not >= 0 and fitting an
if (!file->f_op)
goto out;
- ret = -EFAULT;
- if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
- goto out;
-
- tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
+ ret = compat_rw_copy_check_uvector(type, uvector, nr_segs,
UIO_FASTIOV, iovstack, &iov);
- if (tot_len == 0) {
- ret = 0;
+ if (ret <= 0)
goto out;
- }
+ tot_len = ret;
ret = rw_verify_area(type, file, pos, tot_len);
if (ret < 0)
goto out;
bool slash = false;
int error = 0;
- br_read_lock(&vfsmount_lock);
while (dentry != root->dentry || vfsmnt != root->mnt) {
struct dentry * parent;
if (!error && !slash)
error = prepend(buffer, buflen, "/", 1);
-out:
- br_read_unlock(&vfsmount_lock);
return error;
global_root:
error = prepend(buffer, buflen, "/", 1);
if (!error)
error = is_mounted(vfsmnt) ? 1 : 2;
- goto out;
+ return error;
}
/**
int error;
prepend(&res, &buflen, "\0", 1);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = prepend_path(path, root, &res, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
return ERR_PTR(error);
int error;
prepend(&res, &buflen, "\0", 1);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = prepend_path(path, &root, &res, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error > 1)
error = -EINVAL;
return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
get_fs_root(current->fs, &root);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = path_with_deleted(path, &root, &res, &buflen);
+ write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
res = ERR_PTR(error);
- write_sequnlock(&rename_lock);
path_put(&root);
return res;
}
get_fs_root_and_pwd(current->fs, &root, &pwd);
error = -ENOENT;
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
if (!d_unlinked(pwd.dentry)) {
unsigned long len;
prepend(&cwd, &buflen, "\0", 1);
error = prepend_path(&pwd, &root, &cwd, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
goto out;
}
} else {
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
}
out:
* as writing the quota to disk may need the lock as well.
*/
/* Quota is already initialized in iput() */
- ext2_xattr_delete_inode(inode);
dquot_free_inode(inode);
dquot_drop(inode);
#include "ext2.h"
#include "acl.h"
#include "xip.h"
+#include "xattr.h"
static int __ext2_write_inode(struct inode *inode, int do_sync);
inode->i_size = 0;
if (inode->i_blocks)
ext2_truncate_blocks(inode, 0);
+ ext2_xattr_delete_inode(inode);
}
invalidate_inode_buffers(inode);
return bdev;
fail:
- ext3_msg(sb, "error: failed to open journal device %s: %ld",
+ ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld",
__bdevname(dev, b), PTR_ERR(bdev));
return NULL;
/*todo: use simple_strtoll with >32bit ext3 */
sb_block = simple_strtoul(options, &options, 0);
if (*options && *options != ',') {
- ext3_msg(sb, "error: invalid sb specification: %s",
+ ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s",
(char *) *data);
return 1;
}
*/
struct flex_groups {
- atomic_t free_inodes;
- atomic_t free_clusters;
- atomic_t used_dirs;
+ atomic64_t free_clusters;
+ atomic_t free_inodes;
+ atomic_t used_dirs;
};
#define EXT4_BG_INODE_UNINIT 0x0001 /* Inode table/bitmap not in use */
extern int __init ext4_init_pageio(void);
extern void ext4_add_complete_io(ext4_io_end_t *io_end);
extern void ext4_exit_pageio(void);
-extern void ext4_ioend_wait(struct inode *);
+extern void ext4_ioend_shutdown(struct inode *);
extern void ext4_free_io_end(ext4_io_end_t *io);
extern ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags);
extern void ext4_end_io_work(struct work_struct *work);
unsigned short ext1_ee_len, ext2_ee_len, max_len;
/*
- * Make sure that either both extents are uninitialized, or
- * both are _not_.
+ * Make sure that both extents are initialized. We don't merge
+ * uninitialized extents so that we can be sure that end_io code has
+ * the extent that was written properly split out and conversion to
+ * initialized is trivial.
*/
- if (ext4_ext_is_uninitialized(ex1) ^ ext4_ext_is_uninitialized(ex2))
+ if (ext4_ext_is_uninitialized(ex1) || ext4_ext_is_uninitialized(ex2))
return 0;
if (ext4_ext_is_uninitialized(ex1))
{
ext4_fsblk_t newblock;
ext4_lblk_t ee_block;
- struct ext4_extent *ex, newex, orig_ex;
+ struct ext4_extent *ex, newex, orig_ex, zero_ex;
struct ext4_extent *ex2 = NULL;
unsigned int ee_len, depth;
int err = 0;
newblock = split - ee_block + ext4_ext_pblock(ex);
BUG_ON(split < ee_block || split >= (ee_block + ee_len));
+ BUG_ON(!ext4_ext_is_uninitialized(ex) &&
+ split_flag & (EXT4_EXT_MAY_ZEROOUT |
+ EXT4_EXT_MARK_UNINIT1 |
+ EXT4_EXT_MARK_UNINIT2));
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) {
if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) {
- if (split_flag & EXT4_EXT_DATA_VALID1)
+ if (split_flag & EXT4_EXT_DATA_VALID1) {
err = ext4_ext_zeroout(inode, ex2);
- else
+ zero_ex.ee_block = ex2->ee_block;
+ zero_ex.ee_len = ext4_ext_get_actual_len(ex2);
+ ext4_ext_store_pblock(&zero_ex,
+ ext4_ext_pblock(ex2));
+ } else {
err = ext4_ext_zeroout(inode, ex);
- } else
+ zero_ex.ee_block = ex->ee_block;
+ zero_ex.ee_len = ext4_ext_get_actual_len(ex);
+ ext4_ext_store_pblock(&zero_ex,
+ ext4_ext_pblock(ex));
+ }
+ } else {
err = ext4_ext_zeroout(inode, &orig_ex);
+ zero_ex.ee_block = orig_ex.ee_block;
+ zero_ex.ee_len = ext4_ext_get_actual_len(&orig_ex);
+ ext4_ext_store_pblock(&zero_ex,
+ ext4_ext_pblock(&orig_ex));
+ }
if (err)
goto fix_extent_len;
ex->ee_len = cpu_to_le16(ee_len);
ext4_ext_try_to_merge(handle, inode, path, ex);
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
+ if (err)
+ goto fix_extent_len;
+
+ /* update extent status tree */
+ err = ext4_es_zeroout(inode, &zero_ex);
+
goto out;
} else if (err)
goto fix_extent_len;
int err = 0;
int uninitialized;
int split_flag1, flags1;
+ int allocated = map->m_len;
depth = ext_depth(inode);
ex = path[depth].p_ext;
map->m_lblk + map->m_len, split_flag1, flags1);
if (err)
goto out;
+ } else {
+ allocated = ee_len - (map->m_lblk - ee_block);
}
-
+ /*
+ * Update path is required because previous ext4_split_extent_at() may
+ * result in split of original leaf or extent zeroout.
+ */
ext4_ext_drop_refs(path);
path = ext4_ext_find_extent(inode, map->m_lblk, path);
if (IS_ERR(path))
return PTR_ERR(path);
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ uninitialized = ext4_ext_is_uninitialized(ex);
+ split_flag1 = 0;
if (map->m_lblk >= ee_block) {
- split_flag1 = split_flag & (EXT4_EXT_MAY_ZEROOUT |
- EXT4_EXT_DATA_VALID2);
- if (uninitialized)
+ split_flag1 = split_flag & EXT4_EXT_DATA_VALID2;
+ if (uninitialized) {
split_flag1 |= EXT4_EXT_MARK_UNINIT1;
- if (split_flag & EXT4_EXT_MARK_UNINIT2)
- split_flag1 |= EXT4_EXT_MARK_UNINIT2;
+ split_flag1 |= split_flag & (EXT4_EXT_MAY_ZEROOUT |
+ EXT4_EXT_MARK_UNINIT2);
+ }
err = ext4_split_extent_at(handle, inode, path,
map->m_lblk, split_flag1, flags);
if (err)
ext4_ext_show_leaf(inode, path);
out:
- return err ? err : map->m_len;
+ return err ? err : allocated;
}
/*
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
allocated = ee_len - (map->m_lblk - ee_block);
+ zero_ex.ee_len = 0;
trace_ext4_ext_convert_to_initialized_enter(inode, map, ex);
if (EXT4_EXT_MAY_ZEROOUT & split_flag)
max_zeroout = sbi->s_extent_max_zeroout_kb >>
- inode->i_sb->s_blocksize_bits;
+ (inode->i_sb->s_blocksize_bits - 10);
/* If extent is less than s_max_zeroout_kb, zeroout directly */
if (max_zeroout && (ee_len <= max_zeroout)) {
err = ext4_ext_zeroout(inode, ex);
if (err)
goto out;
+ zero_ex.ee_block = ex->ee_block;
+ zero_ex.ee_len = ext4_ext_get_actual_len(ex);
+ ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex));
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
err = allocated;
out:
+ /* If we have gotten a failure, don't zero out status tree */
+ if (!err)
+ err = ext4_es_zeroout(inode, &zero_ex);
return err ? err : allocated;
}
"block %llu, max_blocks %u\n", inode->i_ino,
(unsigned long long)ee_block, ee_len);
- /* If extent is larger than requested then split is required */
+ /* If extent is larger than requested it is a clear sign that we still
+ * have some extent state machine issues left. So extent_split is still
+ * required.
+ * TODO: Once all related issues will be fixed this situation should be
+ * illegal.
+ */
if (ee_block != map->m_lblk || ee_len > map->m_len) {
+#ifdef EXT4_DEBUG
+ ext4_warning("Inode (%ld) finished: extent logical block %llu,"
+ " len %u; IO logical block %llu, len %u\n",
+ inode->i_ino, (unsigned long long)ee_block, ee_len,
+ (unsigned long long)map->m_lblk, map->m_len);
+#endif
err = ext4_split_unwritten_extents(handle, inode, map, path,
EXT4_GET_BLOCKS_CONVERT);
if (err < 0)
path, map->m_len);
} else
err = ret;
+ map->m_flags |= EXT4_MAP_MAPPED;
+ if (allocated > map->m_len)
+ allocated = map->m_len;
+ map->m_len = allocated;
goto out2;
}
/* buffered IO case */
allocated - map->m_len);
allocated = map->m_len;
}
+ map->m_len = allocated;
/*
* If we have done fallocate with the offset that is already
}
} else {
BUG_ON(allocated_clusters < reserved_clusters);
- /* We will claim quota for all newly allocated blocks.*/
- ext4_da_update_reserve_space(inode, allocated_clusters,
- 1);
if (reserved_clusters < allocated_clusters) {
struct ext4_inode_info *ei = EXT4_I(inode);
int reservation = allocated_clusters -
ei->i_reserved_data_blocks += reservation;
spin_unlock(&ei->i_block_reservation_lock);
}
+ /*
+ * We will claim quota for all newly allocated blocks.
+ * We're updating the reserved space *after* the
+ * correction above so we do not accidentally free
+ * all the metadata reservation because we might
+ * actually need it later on.
+ */
+ ext4_da_update_reserve_space(inode, allocated_clusters,
+ 1);
}
}
if (len <= EXT_UNINIT_MAX_LEN << blkbits)
flags |= EXT4_GET_BLOCKS_NO_NORMALIZE;
- /* Prevent race condition between unwritten */
- ext4_flush_unwritten_io(inode);
retry:
while (ret >= 0 && ret < max_blocks) {
map.m_lblk = map.m_lblk + ret;
static int ext4_es_can_be_merged(struct extent_status *es1,
struct extent_status *es2)
{
- if (es1->es_lblk + es1->es_len != es2->es_lblk)
+ if (ext4_es_status(es1) != ext4_es_status(es2))
return 0;
- if (ext4_es_status(es1) != ext4_es_status(es2))
+ if (((__u64) es1->es_len) + es2->es_len > 0xFFFFFFFFULL)
return 0;
- if ((ext4_es_is_written(es1) || ext4_es_is_unwritten(es1)) &&
- (ext4_es_pblock(es1) + es1->es_len != ext4_es_pblock(es2)))
+ if (((__u64) es1->es_lblk) + es1->es_len != es2->es_lblk)
return 0;
- return 1;
+ if ((ext4_es_is_written(es1) || ext4_es_is_unwritten(es1)) &&
+ (ext4_es_pblock(es1) + es1->es_len == ext4_es_pblock(es2)))
+ return 1;
+
+ if (ext4_es_is_hole(es1))
+ return 1;
+
+ /* we need to check delayed extent is without unwritten status */
+ if (ext4_es_is_delayed(es1) && !ext4_es_is_unwritten(es1))
+ return 1;
+
+ return 0;
}
static struct extent_status *
return es;
}
+#ifdef ES_AGGRESSIVE_TEST
+static void ext4_es_insert_extent_ext_check(struct inode *inode,
+ struct extent_status *es)
+{
+ struct ext4_ext_path *path = NULL;
+ struct ext4_extent *ex;
+ ext4_lblk_t ee_block;
+ ext4_fsblk_t ee_start;
+ unsigned short ee_len;
+ int depth, ee_status, es_status;
+
+ path = ext4_ext_find_extent(inode, es->es_lblk, NULL);
+ if (IS_ERR(path))
+ return;
+
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+
+ if (ex) {
+
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_start = ext4_ext_pblock(ex);
+ ee_len = ext4_ext_get_actual_len(ex);
+
+ ee_status = ext4_ext_is_uninitialized(ex) ? 1 : 0;
+ es_status = ext4_es_is_unwritten(es) ? 1 : 0;
+
+ /*
+ * Make sure ex and es are not overlap when we try to insert
+ * a delayed/hole extent.
+ */
+ if (!ext4_es_is_written(es) && !ext4_es_is_unwritten(es)) {
+ if (in_range(es->es_lblk, ee_block, ee_len)) {
+ pr_warn("ES insert assertation failed for "
+ "inode: %lu we can find an extent "
+ "at block [%d/%d/%llu/%c], but we "
+ "want to add an delayed/hole extent "
+ "[%d/%d/%llu/%llx]\n",
+ inode->i_ino, ee_block, ee_len,
+ ee_start, ee_status ? 'u' : 'w',
+ es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ }
+ goto out;
+ }
+
+ /*
+ * We don't check ee_block == es->es_lblk, etc. because es
+ * might be a part of whole extent, vice versa.
+ */
+ if (es->es_lblk < ee_block ||
+ ext4_es_pblock(es) != ee_start + es->es_lblk - ee_block) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "ex_status [%d/%d/%llu/%c] != "
+ "es_status [%d/%d/%llu/%c]\n", inode->i_ino,
+ ee_block, ee_len, ee_start,
+ ee_status ? 'u' : 'w', es->es_lblk, es->es_len,
+ ext4_es_pblock(es), es_status ? 'u' : 'w');
+ goto out;
+ }
+
+ if (ee_status ^ es_status) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "ex_status [%d/%d/%llu/%c] != "
+ "es_status [%d/%d/%llu/%c]\n", inode->i_ino,
+ ee_block, ee_len, ee_start,
+ ee_status ? 'u' : 'w', es->es_lblk, es->es_len,
+ ext4_es_pblock(es), es_status ? 'u' : 'w');
+ }
+ } else {
+ /*
+ * We can't find an extent on disk. So we need to make sure
+ * that we don't want to add an written/unwritten extent.
+ */
+ if (!ext4_es_is_delayed(es) && !ext4_es_is_hole(es)) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "can't find an extent at block %d but we want "
+ "to add an written/unwritten extent "
+ "[%d/%d/%llu/%llx]\n", inode->i_ino,
+ es->es_lblk, es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ }
+ }
+out:
+ if (path) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ }
+}
+
+static void ext4_es_insert_extent_ind_check(struct inode *inode,
+ struct extent_status *es)
+{
+ struct ext4_map_blocks map;
+ int retval;
+
+ /*
+ * Here we call ext4_ind_map_blocks to lookup a block mapping because
+ * 'Indirect' structure is defined in indirect.c. So we couldn't
+ * access direct/indirect tree from outside. It is too dirty to define
+ * this function in indirect.c file.
+ */
+
+ map.m_lblk = es->es_lblk;
+ map.m_len = es->es_len;
+
+ retval = ext4_ind_map_blocks(NULL, inode, &map, 0);
+ if (retval > 0) {
+ if (ext4_es_is_delayed(es) || ext4_es_is_hole(es)) {
+ /*
+ * We want to add a delayed/hole extent but this
+ * block has been allocated.
+ */
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "We can find blocks but we want to add a "
+ "delayed/hole extent [%d/%d/%llu/%llx]\n",
+ inode->i_ino, es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ return;
+ } else if (ext4_es_is_written(es)) {
+ if (retval != es->es_len) {
+ pr_warn("ES insert assertation failed for "
+ "inode: %lu retval %d != es_len %d\n",
+ inode->i_ino, retval, es->es_len);
+ return;
+ }
+ if (map.m_pblk != ext4_es_pblock(es)) {
+ pr_warn("ES insert assertation failed for "
+ "inode: %lu m_pblk %llu != "
+ "es_pblk %llu\n",
+ inode->i_ino, map.m_pblk,
+ ext4_es_pblock(es));
+ return;
+ }
+ } else {
+ /*
+ * We don't need to check unwritten extent because
+ * indirect-based file doesn't have it.
+ */
+ BUG_ON(1);
+ }
+ } else if (retval == 0) {
+ if (ext4_es_is_written(es)) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "We can't find the block but we want to add "
+ "an written extent [%d/%d/%llu/%llx]\n",
+ inode->i_ino, es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ return;
+ }
+ }
+}
+
+static inline void ext4_es_insert_extent_check(struct inode *inode,
+ struct extent_status *es)
+{
+ /*
+ * We don't need to worry about the race condition because
+ * caller takes i_data_sem locking.
+ */
+ BUG_ON(!rwsem_is_locked(&EXT4_I(inode)->i_data_sem));
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
+ ext4_es_insert_extent_ext_check(inode, es);
+ else
+ ext4_es_insert_extent_ind_check(inode, es);
+}
+#else
+static inline void ext4_es_insert_extent_check(struct inode *inode,
+ struct extent_status *es)
+{
+}
+#endif
+
static int __es_insert_extent(struct inode *inode, struct extent_status *newes)
{
struct ext4_es_tree *tree = &EXT4_I(inode)->i_es_tree;
ext4_es_store_status(&newes, status);
trace_ext4_es_insert_extent(inode, &newes);
+ ext4_es_insert_extent_check(inode, &newes);
+
write_lock(&EXT4_I(inode)->i_es_lock);
err = __es_remove_extent(inode, lblk, end);
if (err != 0)
return err;
}
+int ext4_es_zeroout(struct inode *inode, struct ext4_extent *ex)
+{
+ ext4_lblk_t ee_block;
+ ext4_fsblk_t ee_pblock;
+ unsigned int ee_len;
+
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_len = ext4_ext_get_actual_len(ex);
+ ee_pblock = ext4_ext_pblock(ex);
+
+ if (ee_len == 0)
+ return 0;
+
+ return ext4_es_insert_extent(inode, ee_block, ee_len, ee_pblock,
+ EXTENT_STATUS_WRITTEN);
+}
+
static int ext4_es_shrink(struct shrinker *shrink, struct shrink_control *sc)
{
struct ext4_sb_info *sbi = container_of(shrink,
#define es_debug(fmt, ...) no_printk(fmt, ##__VA_ARGS__)
#endif
+/*
+ * With ES_AGGRESSIVE_TEST defined, the result of es caching will be
+ * checked with old map_block's result.
+ */
+#define ES_AGGRESSIVE_TEST__
+
/*
* These flags live in the high bits of extent_status.es_pblk
*/
EXTENT_STATUS_DELAYED | \
EXTENT_STATUS_HOLE)
+struct ext4_extent;
+
struct extent_status {
struct rb_node rb_node;
ext4_lblk_t es_lblk; /* first logical block extent covers */
struct extent_status *es);
extern int ext4_es_lookup_extent(struct inode *inode, ext4_lblk_t lblk,
struct extent_status *es);
+extern int ext4_es_zeroout(struct inode *inode, struct ext4_extent *ex);
static inline int ext4_es_is_written(struct extent_status *es)
{
}
struct orlov_stats {
+ __u64 free_clusters;
__u32 free_inodes;
- __u32 free_clusters;
__u32 used_dirs;
};
if (flex_size > 1) {
stats->free_inodes = atomic_read(&flex_group[g].free_inodes);
- stats->free_clusters = atomic_read(&flex_group[g].free_clusters);
+ stats->free_clusters = atomic64_read(&flex_group[g].free_clusters);
stats->used_dirs = atomic_read(&flex_group[g].used_dirs);
return;
}
trace_ext4_evict_inode(inode);
- ext4_ioend_wait(inode);
-
if (inode->i_nlink) {
/*
* When journalling data dirty buffers are tracked only in the
* don't use page cache.
*/
if (ext4_should_journal_data(inode) &&
- (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode))) {
+ (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode)) &&
+ inode->i_ino != EXT4_JOURNAL_INO) {
journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
tid_t commit_tid = EXT4_I(inode)->i_datasync_tid;
filemap_write_and_wait(&inode->i_data);
}
truncate_inode_pages(&inode->i_data, 0);
+ ext4_ioend_shutdown(inode);
goto no_delete;
}
if (ext4_should_order_data(inode))
ext4_begin_ordered_truncate(inode, 0);
truncate_inode_pages(&inode->i_data, 0);
+ ext4_ioend_shutdown(inode);
if (is_bad_inode(inode))
goto no_delete;
return num;
}
+#ifdef ES_AGGRESSIVE_TEST
+static void ext4_map_blocks_es_recheck(handle_t *handle,
+ struct inode *inode,
+ struct ext4_map_blocks *es_map,
+ struct ext4_map_blocks *map,
+ int flags)
+{
+ int retval;
+
+ map->m_flags = 0;
+ /*
+ * There is a race window that the result is not the same.
+ * e.g. xfstests #223 when dioread_nolock enables. The reason
+ * is that we lookup a block mapping in extent status tree with
+ * out taking i_data_sem. So at the time the unwritten extent
+ * could be converted.
+ */
+ if (!(flags & EXT4_GET_BLOCKS_NO_LOCK))
+ down_read((&EXT4_I(inode)->i_data_sem));
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
+ retval = ext4_ext_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
+ } else {
+ retval = ext4_ind_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
+ }
+ if (!(flags & EXT4_GET_BLOCKS_NO_LOCK))
+ up_read((&EXT4_I(inode)->i_data_sem));
+ /*
+ * Clear EXT4_MAP_FROM_CLUSTER and EXT4_MAP_BOUNDARY flag
+ * because it shouldn't be marked in es_map->m_flags.
+ */
+ map->m_flags &= ~(EXT4_MAP_FROM_CLUSTER | EXT4_MAP_BOUNDARY);
+
+ /*
+ * We don't check m_len because extent will be collpased in status
+ * tree. So the m_len might not equal.
+ */
+ if (es_map->m_lblk != map->m_lblk ||
+ es_map->m_flags != map->m_flags ||
+ es_map->m_pblk != map->m_pblk) {
+ printk("ES cache assertation failed for inode: %lu "
+ "es_cached ex [%d/%d/%llu/%x] != "
+ "found ex [%d/%d/%llu/%x] retval %d flags %x\n",
+ inode->i_ino, es_map->m_lblk, es_map->m_len,
+ es_map->m_pblk, es_map->m_flags, map->m_lblk,
+ map->m_len, map->m_pblk, map->m_flags,
+ retval, flags);
+ }
+}
+#endif /* ES_AGGRESSIVE_TEST */
+
/*
* The ext4_map_blocks() function tries to look up the requested blocks,
* and returns if the blocks are already mapped.
{
struct extent_status es;
int retval;
+#ifdef ES_AGGRESSIVE_TEST
+ struct ext4_map_blocks orig_map;
+
+ memcpy(&orig_map, map, sizeof(*map));
+#endif
map->m_flags = 0;
ext_debug("ext4_map_blocks(): inode %lu, flag %d, max_blocks %u,"
} else {
BUG_ON(1);
}
+#ifdef ES_AGGRESSIVE_TEST
+ ext4_map_blocks_es_recheck(handle, inode, map,
+ &orig_map, flags);
+#endif
goto found;
}
int ret;
unsigned long long status;
+#ifdef ES_AGGRESSIVE_TEST
+ if (retval != map->m_len) {
+ printk("ES len assertation failed for inode: %lu "
+ "retval %d != map->m_len %d "
+ "in %s (lookup)\n", inode->i_ino, retval,
+ map->m_len, __func__);
+ }
+#endif
+
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
int ret;
unsigned long long status;
+#ifdef ES_AGGRESSIVE_TEST
+ if (retval != map->m_len) {
+ printk("ES len assertation failed for inode: %lu "
+ "retval %d != map->m_len %d "
+ "in %s (allocation)\n", inode->i_ino, retval,
+ map->m_len, __func__);
+ }
+#endif
+
+ /*
+ * If the extent has been zeroed out, we don't need to update
+ * extent status tree.
+ */
+ if ((flags & EXT4_GET_BLOCKS_PRE_IO) &&
+ ext4_es_lookup_extent(inode, map->m_lblk, &es)) {
+ if (ext4_es_is_written(&es))
+ goto has_zeroout;
+ }
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
retval = ret;
}
+has_zeroout:
up_write((&EXT4_I(inode)->i_data_sem));
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
int ret = check_block_validity(inode, map);
return ret ? ret : copied;
}
+/*
+ * Reserve a metadata for a single block located at lblock
+ */
+static int ext4_da_reserve_metadata(struct inode *inode, ext4_lblk_t lblock)
+{
+ int retries = 0;
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ unsigned int md_needed;
+ ext4_lblk_t save_last_lblock;
+ int save_len;
+
+ /*
+ * recalculate the amount of metadata blocks to reserve
+ * in order to allocate nrblocks
+ * worse case is one extent per block
+ */
+repeat:
+ spin_lock(&ei->i_block_reservation_lock);
+ /*
+ * ext4_calc_metadata_amount() has side effects, which we have
+ * to be prepared undo if we fail to claim space.
+ */
+ save_len = ei->i_da_metadata_calc_len;
+ save_last_lblock = ei->i_da_metadata_calc_last_lblock;
+ md_needed = EXT4_NUM_B2C(sbi,
+ ext4_calc_metadata_amount(inode, lblock));
+ trace_ext4_da_reserve_space(inode, md_needed);
+
+ /*
+ * We do still charge estimated metadata to the sb though;
+ * we cannot afford to run out of free blocks.
+ */
+ if (ext4_claim_free_clusters(sbi, md_needed, 0)) {
+ ei->i_da_metadata_calc_len = save_len;
+ ei->i_da_metadata_calc_last_lblock = save_last_lblock;
+ spin_unlock(&ei->i_block_reservation_lock);
+ if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
+ cond_resched();
+ goto repeat;
+ }
+ return -ENOSPC;
+ }
+ ei->i_reserved_meta_blocks += md_needed;
+ spin_unlock(&ei->i_block_reservation_lock);
+
+ return 0; /* success */
+}
+
/*
* Reserve a single cluster located at lblock
*/
ei->i_da_metadata_calc_last_lblock = save_last_lblock;
spin_unlock(&ei->i_block_reservation_lock);
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
- yield();
+ cond_resched();
goto repeat;
}
dquot_release_reservation_block(inode, EXT4_C2B(sbi, 1));
struct extent_status es;
int retval;
sector_t invalid_block = ~((sector_t) 0xffff);
+#ifdef ES_AGGRESSIVE_TEST
+ struct ext4_map_blocks orig_map;
+
+ memcpy(&orig_map, map, sizeof(*map));
+#endif
if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
invalid_block = ~0;
else
BUG_ON(1);
+#ifdef ES_AGGRESSIVE_TEST
+ ext4_map_blocks_es_recheck(NULL, inode, map, &orig_map, 0);
+#endif
return retval;
}
* XXX: __block_prepare_write() unmaps passed block,
* is it OK?
*/
- /* If the block was allocated from previously allocated cluster,
- * then we dont need to reserve it again. */
+ /*
+ * If the block was allocated from previously allocated cluster,
+ * then we don't need to reserve it again. However we still need
+ * to reserve metadata for every block we're going to write.
+ */
if (!(map->m_flags & EXT4_MAP_FROM_CLUSTER)) {
ret = ext4_da_reserve_space(inode, iblock);
if (ret) {
retval = ret;
goto out_unlock;
}
+ } else {
+ ret = ext4_da_reserve_metadata(inode, iblock);
+ if (ret) {
+ /* not enough space to reserve */
+ retval = ret;
+ goto out_unlock;
+ }
}
ret = ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
int ret;
unsigned long long status;
+#ifdef ES_AGGRESSIVE_TEST
+ if (retval != map->m_len) {
+ printk("ES len assertation failed for inode: %lu "
+ "retval %d != map->m_len %d "
+ "in %s (lookup)\n", inode->i_ino, retval,
+ map->m_len, __func__);
+ }
+#endif
+
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
ret = ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
trace_ext4_releasepage(page);
- WARN_ON(PageChecked(page));
- if (!page_has_buffers(page))
+ /* Page has dirty journalled data -> cannot release */
+ if (PageChecked(page))
return 0;
if (journal)
return jbd2_journal_try_to_free_buffers(journal, page, wait);
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi,
ac->ac_b_ex.fe_group);
- atomic_sub(ac->ac_b_ex.fe_len,
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_sub(ac->ac_b_ex.fe_len,
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
if (free < needed && busy) {
busy = 0;
ext4_unlock_group(sb, group);
- /*
- * Yield the CPU here so that we don't get soft lockup
- * in non preempt case.
- */
- yield();
+ cond_resched();
goto repeat;
}
ext4_claim_free_clusters(sbi, ar->len, ar->flags)) {
/* let others to free the space */
- yield();
+ cond_resched();
ar->len = ar->len >> 1;
}
if (!ar->len) {
struct buffer_head *bitmap_bh = NULL;
struct super_block *sb = inode->i_sb;
struct ext4_group_desc *gdp;
- unsigned long freed = 0;
unsigned int overflow;
ext4_grpblk_t bit;
struct buffer_head *gd_bh;
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(count_clusters,
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(count_clusters,
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
- freed += count;
-
if (!(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
dquot_free_block(inode, EXT4_C2B(sbi, count_clusters));
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(EXT4_NUM_B2C(sbi, blocks_freed),
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(EXT4_NUM_B2C(sbi, blocks_freed),
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
*/
static inline int
get_ext_path(struct inode *inode, ext4_lblk_t lblock,
- struct ext4_ext_path **path)
+ struct ext4_ext_path **orig_path)
{
int ret = 0;
+ struct ext4_ext_path *path;
- *path = ext4_ext_find_extent(inode, lblock, *path);
- if (IS_ERR(*path)) {
- ret = PTR_ERR(*path);
- *path = NULL;
- } else if ((*path)[ext_depth(inode)].p_ext == NULL)
+ path = ext4_ext_find_extent(inode, lblock, *orig_path);
+ if (IS_ERR(path))
+ ret = PTR_ERR(path);
+ else if (path[ext_depth(inode)].p_ext == NULL)
ret = -ENODATA;
+ else
+ *orig_path = path;
return ret;
}
{
struct ext4_ext_path *path = NULL;
struct ext4_extent *ext;
+ int ret = 0;
ext4_lblk_t last = from + count;
while (from < last) {
*err = get_ext_path(inode, from, &path);
if (*err)
- return 0;
+ goto out;
ext = path[ext_depth(inode)].p_ext;
- if (!ext) {
- ext4_ext_drop_refs(path);
- return 0;
- }
- if (uninit != ext4_ext_is_uninitialized(ext)) {
- ext4_ext_drop_refs(path);
- return 0;
- }
+ if (uninit != ext4_ext_is_uninitialized(ext))
+ goto out;
from += ext4_ext_get_actual_len(ext);
ext4_ext_drop_refs(path);
}
- return 1;
+ ret = 1;
+out:
+ if (path) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ }
+ return ret;
}
/**
int replaced_count = 0;
int dext_alen;
+ *err = ext4_es_remove_extent(orig_inode, from, count);
+ if (*err)
+ goto out;
+
+ *err = ext4_es_remove_extent(donor_inode, from, count);
+ if (*err)
+ goto out;
+
/* Get the original extent for the block "orig_off" */
*err = get_ext_path(orig_inode, orig_off, &orig_path);
if (*err)
kmem_cache_destroy(io_page_cachep);
}
-void ext4_ioend_wait(struct inode *inode)
+/*
+ * This function is called by ext4_evict_inode() to make sure there is
+ * no more pending I/O completion work left to do.
+ */
+void ext4_ioend_shutdown(struct inode *inode)
{
wait_queue_head_t *wq = ext4_ioend_wq(inode);
wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_ioend_count) == 0));
+ /*
+ * We need to make sure the work structure is finished being
+ * used before we let the inode get destroyed.
+ */
+ if (work_pending(&EXT4_I(inode)->i_unwritten_work))
+ cancel_work_sync(&EXT4_I(inode)->i_unwritten_work);
}
static void put_io_page(struct ext4_io_page *io_page)
sbi->s_log_groups_per_flex) {
ext4_group_t flex_group;
flex_group = ext4_flex_group(sbi, group_data[0].group);
- atomic_add(EXT4_NUM_B2C(sbi, free_blocks),
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(EXT4_NUM_B2C(sbi, free_blocks),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(EXT4_INODES_PER_GROUP(sb) * flex_gd->count,
&sbi->s_flex_groups[flex_group].free_inodes);
}
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("ext2");
+MODULE_ALIAS("ext2");
#define IS_EXT2_SB(sb) ((sb)->s_bdev->bd_holder == &ext2_fs_type)
#else
#define IS_EXT2_SB(sb) (0)
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("ext3");
+MODULE_ALIAS("ext3");
#define IS_EXT3_SB(sb) ((sb)->s_bdev->bd_holder == &ext3_fs_type)
#else
#define IS_EXT3_SB(sb) (0)
flex_group = ext4_flex_group(sbi, i);
atomic_add(ext4_free_inodes_count(sb, gdp),
&sbi->s_flex_groups[flex_group].free_inodes);
- atomic_add(ext4_free_group_clusters(sb, gdp),
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(ext4_free_group_clusters(sb, gdp),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(ext4_used_dirs_count(sb, gdp),
&sbi->s_flex_groups[flex_group].used_dirs);
}
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("vxfs"); /* makes mount -t vxfs autoload the module */
+MODULE_ALIAS("vxfs");
static int __init
vxfs_init(void)
return err;
if ((attr->ia_valid & ATTR_SIZE) &&
- attr->ia_size != i_size_read(inode)) {
- int error;
-
- error = inode_newsize_ok(inode, attr->ia_size);
- if (error)
- return error;
-
+ attr->ia_size != i_size_read(inode))
truncate_setsize(inode, attr->ia_size);
- }
setattr_copy(inode, attr);
mark_inode_dirty(inode);
.kill_sb = hostfs_kill_sb,
.fs_flags = 0,
};
+MODULE_ALIAS_FS("hostfs");
static int __init init_hostfs(void)
{
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
+MODULE_ALIAS_FS("hpfs");
static int __init init_hpfs_fs(void)
{
* dcache.c
*/
extern struct dentry *__d_alloc(struct super_block *, const struct qstr *);
+
+/*
+ * read_write.c
+ */
+extern ssize_t __kernel_write(struct file *, const char *, size_t, loff_t *);
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("iso9660");
+MODULE_ALIAS("iso9660");
static int __init init_iso9660_fs(void)
{
void jbd2_journal_set_triggers(struct buffer_head *bh,
struct jbd2_buffer_trigger_type *type)
{
- struct journal_head *jh = bh2jh(bh);
+ struct journal_head *jh = jbd2_journal_grab_journal_head(bh);
+ if (WARN_ON(!jh))
+ return;
jh->b_triggers = type;
+ jbd2_journal_put_journal_head(jh);
}
void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
{
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
- struct journal_head *jh = bh2jh(bh);
+ struct journal_head *jh;
int ret = 0;
- jbd_debug(5, "journal_head %p\n", jh);
- JBUFFER_TRACE(jh, "entry");
if (is_handle_aborted(handle))
goto out;
- if (!buffer_jbd(bh)) {
+ jh = jbd2_journal_grab_journal_head(bh);
+ if (!jh) {
ret = -EUCLEAN;
goto out;
}
+ jbd_debug(5, "journal_head %p\n", jh);
+ JBUFFER_TRACE(jh, "entry");
jbd_lock_bh_state(bh);
spin_unlock(&journal->j_list_lock);
out_unlock_bh:
jbd_unlock_bh_state(bh);
+ jbd2_journal_put_journal_head(jh);
out:
JBUFFER_TRACE(jh, "exit");
WARN_ON(ret); /* All errors are bugs, so dump the stack */
}
mnt->mnt.mnt_flags = old->mnt.mnt_flags & ~MNT_WRITE_HOLD;
+ /* Don't allow unprivileged users to change mount flags */
+ if ((flag & CL_UNPRIVILEGED) && (mnt->mnt.mnt_flags & MNT_READONLY))
+ mnt->mnt.mnt_flags |= MNT_LOCK_READONLY;
+
atomic_inc(&sb->s_active);
mnt->mnt.mnt_sb = sb;
mnt->mnt.mnt_root = dget(root);
if (readonly_request == __mnt_is_readonly(mnt))
return 0;
+ if (mnt->mnt_flags & MNT_LOCK_READONLY)
+ return -EPERM;
+
if (readonly_request)
error = mnt_make_readonly(real_mount(mnt));
else
/* First pass: copy the tree topology */
copy_flags = CL_COPY_ALL | CL_EXPIRE;
if (user_ns != mnt_ns->user_ns)
- copy_flags |= CL_SHARED_TO_SLAVE;
+ copy_flags |= CL_SHARED_TO_SLAVE | CL_UNPRIVILEGED;
new = copy_tree(old, old->mnt.mnt_root, copy_flags);
if (IS_ERR(new)) {
up_write(&namespace_sem);
return check_mnt(real_mount(mnt));
}
+bool current_chrooted(void)
+{
+ /* Does the current process have a non-standard root */
+ struct path ns_root;
+ struct path fs_root;
+ bool chrooted;
+
+ /* Find the namespace root */
+ ns_root.mnt = ¤t->nsproxy->mnt_ns->root->mnt;
+ ns_root.dentry = ns_root.mnt->mnt_root;
+ path_get(&ns_root);
+ while (d_mountpoint(ns_root.dentry) && follow_down_one(&ns_root))
+ ;
+
+ get_fs_root(current->fs, &fs_root);
+
+ chrooted = !path_equal(&fs_root, &ns_root);
+
+ path_put(&fs_root);
+ path_put(&ns_root);
+
+ return chrooted;
+}
+
+void update_mnt_policy(struct user_namespace *userns)
+{
+ struct mnt_namespace *ns = current->nsproxy->mnt_ns;
+ struct mount *mnt;
+
+ down_read(&namespace_sem);
+ list_for_each_entry(mnt, &ns->list, mnt_list) {
+ switch (mnt->mnt.mnt_sb->s_magic) {
+ case SYSFS_MAGIC:
+ userns->may_mount_sysfs = true;
+ break;
+ case PROC_SUPER_MAGIC:
+ userns->may_mount_proc = true;
+ break;
+ }
+ if (userns->may_mount_sysfs && userns->may_mount_proc)
+ break;
+ }
+ up_read(&namespace_sem);
+}
+
static void *mntns_get(struct task_struct *task)
{
struct mnt_namespace *ns = NULL;
bl_pipe_msg.bl_wq = &nn->bl_wq;
memset(msg, 0, sizeof(*msg));
- msg->data = kzalloc(1 + sizeof(bl_umount_request), GFP_NOFS);
+ msg->len = sizeof(bl_msg) + bl_msg.totallen;
+ msg->data = kzalloc(msg->len, GFP_NOFS);
if (!msg->data)
goto out;
memcpy(msg->data, &bl_msg, sizeof(bl_msg));
dataptr = (uint8_t *) msg->data;
memcpy(&dataptr[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request));
- msg->len = sizeof(bl_msg) + bl_msg.totallen;
add_wait_queue(&nn->bl_wq, &wq);
if (rpc_queue_upcall(nn->bl_device_pipe, msg) < 0) {
return ret;
}
-static int nfs_idmap_instantiate(struct key *key, struct key *authkey, char *data)
+static int nfs_idmap_instantiate(struct key *key, struct key *authkey, char *data, size_t datalen)
{
- return key_instantiate_and_link(key, data, strlen(data) + 1,
+ return key_instantiate_and_link(key, data, datalen,
id_resolver_cache->thread_keyring,
authkey);
}
struct key *key, struct key *authkey)
{
char id_str[NFS_UINT_MAXLEN];
+ size_t len;
int ret = -ENOKEY;
/* ret = -ENOKEY */
case IDMAP_CONV_NAMETOID:
if (strcmp(upcall->im_name, im->im_name) != 0)
break;
- sprintf(id_str, "%d", im->im_id);
- ret = nfs_idmap_instantiate(key, authkey, id_str);
+ /* Note: here we store the NUL terminator too */
+ len = sprintf(id_str, "%d", im->im_id) + 1;
+ ret = nfs_idmap_instantiate(key, authkey, id_str, len);
break;
case IDMAP_CONV_IDTONAME:
if (upcall->im_id != im->im_id)
break;
- ret = nfs_idmap_instantiate(key, authkey, im->im_name);
+ len = strlen(im->im_name);
+ ret = nfs_idmap_instantiate(key, authkey, im->im_name, len);
break;
default:
ret = -EINVAL;
{
if (!test_and_clear_bit(NFS_LAYOUT_RETURN, &lo->plh_flags))
return;
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags);
pnfs_return_layout(inode);
}
int status;
if (pnfs_ld_layoutret_on_setattr(inode))
- pnfs_return_layout(inode);
+ pnfs_commit_and_return_layout(inode);
nfs_fattr_init(fattr);
static void nfs4_layoutcommit_release(void *calldata)
{
struct nfs4_layoutcommit_data *data = calldata;
- struct pnfs_layout_segment *lseg, *tmp;
- unsigned long *bitlock = &NFS_I(data->args.inode)->flags;
pnfs_cleanup_layoutcommit(data);
- /* Matched by references in pnfs_set_layoutcommit */
- list_for_each_entry_safe(lseg, tmp, &data->lseg_list, pls_lc_list) {
- list_del_init(&lseg->pls_lc_list);
- if (test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT,
- &lseg->pls_flags))
- pnfs_put_lseg(lseg);
- }
-
- clear_bit_unlock(NFS_INO_LAYOUTCOMMITTING, bitlock);
- smp_mb__after_clear_bit();
- wake_up_bit(bitlock, NFS_INO_LAYOUTCOMMITTING);
-
put_rpccred(data->cred);
kfree(data);
}
lo_seg_intersecting(lseg_range, recall_range);
}
+static bool pnfs_lseg_dec_and_remove_zero(struct pnfs_layout_segment *lseg,
+ struct list_head *tmp_list)
+{
+ if (!atomic_dec_and_test(&lseg->pls_refcount))
+ return false;
+ pnfs_layout_remove_lseg(lseg->pls_layout, lseg);
+ list_add(&lseg->pls_list, tmp_list);
+ return true;
+}
+
/* Returns 1 if lseg is removed from list, 0 otherwise */
static int mark_lseg_invalid(struct pnfs_layout_segment *lseg,
struct list_head *tmp_list)
*/
dprintk("%s: lseg %p ref %d\n", __func__, lseg,
atomic_read(&lseg->pls_refcount));
- if (atomic_dec_and_test(&lseg->pls_refcount)) {
- pnfs_layout_remove_lseg(lseg->pls_layout, lseg);
- list_add(&lseg->pls_list, tmp_list);
+ if (pnfs_lseg_dec_and_remove_zero(lseg, tmp_list))
rv = 1;
- }
}
return rv;
}
return lseg;
}
+static void pnfs_clear_layoutcommit(struct inode *inode,
+ struct list_head *head)
+{
+ struct nfs_inode *nfsi = NFS_I(inode);
+ struct pnfs_layout_segment *lseg, *tmp;
+
+ if (!test_and_clear_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags))
+ return;
+ list_for_each_entry_safe(lseg, tmp, &nfsi->layout->plh_segs, pls_list) {
+ if (!test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
+ continue;
+ pnfs_lseg_dec_and_remove_zero(lseg, head);
+ }
+}
+
/*
* Initiates a LAYOUTRETURN(FILE), and removes the pnfs_layout_hdr
* when the layout segment list is empty.
/* Reference matched in nfs4_layoutreturn_release */
pnfs_get_layout_hdr(lo);
empty = list_empty(&lo->plh_segs);
+ pnfs_clear_layoutcommit(ino, &tmp_list);
pnfs_mark_matching_lsegs_invalid(lo, &tmp_list, NULL);
/* Don't send a LAYOUTRETURN if list was initially empty */
if (empty) {
spin_unlock(&ino->i_lock);
pnfs_free_lseg_list(&tmp_list);
- WARN_ON(test_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags));
-
lrp = kzalloc(sizeof(*lrp), GFP_KERNEL);
if (unlikely(lrp == NULL)) {
status = -ENOMEM;
}
EXPORT_SYMBOL_GPL(_pnfs_return_layout);
+int
+pnfs_commit_and_return_layout(struct inode *inode)
+{
+ struct pnfs_layout_hdr *lo;
+ int ret;
+
+ spin_lock(&inode->i_lock);
+ lo = NFS_I(inode)->layout;
+ if (lo == NULL) {
+ spin_unlock(&inode->i_lock);
+ return 0;
+ }
+ pnfs_get_layout_hdr(lo);
+ /* Block new layoutgets and read/write to ds */
+ lo->plh_block_lgets++;
+ spin_unlock(&inode->i_lock);
+ filemap_fdatawait(inode->i_mapping);
+ ret = pnfs_layoutcommit_inode(inode, true);
+ if (ret == 0)
+ ret = _pnfs_return_layout(inode);
+ spin_lock(&inode->i_lock);
+ lo->plh_block_lgets--;
+ spin_unlock(&inode->i_lock);
+ pnfs_put_layout_hdr(lo);
+ return ret;
+}
+
bool pnfs_roc(struct inode *ino)
{
struct pnfs_layout_hdr *lo;
dprintk("pnfs write error = %d\n", hdr->pnfs_error);
if (NFS_SERVER(hdr->inode)->pnfs_curr_ld->flags &
PNFS_LAYOUTRET_ON_ERROR) {
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(hdr->inode)->flags);
pnfs_return_layout(hdr->inode);
}
if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags))
dprintk("pnfs read error = %d\n", hdr->pnfs_error);
if (NFS_SERVER(hdr->inode)->pnfs_curr_ld->flags &
PNFS_LAYOUTRET_ON_ERROR) {
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(hdr->inode)->flags);
pnfs_return_layout(hdr->inode);
}
if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags))
list_for_each_entry(lseg, &NFS_I(inode)->layout->plh_segs, pls_list) {
if (lseg->pls_range.iomode == IOMODE_RW &&
- test_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
+ test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
list_add(&lseg->pls_lc_list, listp);
}
}
+static void pnfs_list_write_lseg_done(struct inode *inode, struct list_head *listp)
+{
+ struct pnfs_layout_segment *lseg, *tmp;
+ unsigned long *bitlock = &NFS_I(inode)->flags;
+
+ /* Matched by references in pnfs_set_layoutcommit */
+ list_for_each_entry_safe(lseg, tmp, listp, pls_lc_list) {
+ list_del_init(&lseg->pls_lc_list);
+ pnfs_put_lseg(lseg);
+ }
+
+ clear_bit_unlock(NFS_INO_LAYOUTCOMMITTING, bitlock);
+ smp_mb__after_clear_bit();
+ wake_up_bit(bitlock, NFS_INO_LAYOUTCOMMITTING);
+}
+
void pnfs_set_lo_fail(struct pnfs_layout_segment *lseg)
{
pnfs_layout_io_set_failed(lseg->pls_layout, lseg->pls_range.iomode);
if (nfss->pnfs_curr_ld->cleanup_layoutcommit)
nfss->pnfs_curr_ld->cleanup_layoutcommit(data);
+ pnfs_list_write_lseg_done(data->args.inode, &data->lseg_list);
}
/*
void pnfs_cleanup_layoutcommit(struct nfs4_layoutcommit_data *data);
int pnfs_layoutcommit_inode(struct inode *inode, bool sync);
int _pnfs_return_layout(struct inode *);
+int pnfs_commit_and_return_layout(struct inode *);
void pnfs_ld_write_done(struct nfs_write_data *);
void pnfs_ld_read_done(struct nfs_read_data *);
struct pnfs_layout_segment *pnfs_update_layout(struct inode *ino,
return 0;
}
+static inline int pnfs_commit_and_return_layout(struct inode *inode)
+{
+ return 0;
+}
+
static inline bool
pnfs_ld_layoutret_on_setattr(struct inode *inode)
{
.fs_flags = FS_RENAME_DOES_D_MOVE|FS_BINARY_MOUNTDATA,
};
MODULE_ALIAS_FS("nfs4");
+MODULE_ALIAS("nfs4");
EXPORT_SYMBOL_GPL(nfs4_fs_type);
static int __init register_nfs4_fs(void)
__nfs4_file_put_access(fp, oflag);
}
-static inline int get_new_stid(struct nfs4_stid *stid)
-{
- static int min_stateid = 0;
- struct idr *stateids = &stid->sc_client->cl_stateids;
- int new_stid;
- int error;
-
- error = idr_get_new_above(stateids, stid, min_stateid, &new_stid);
- /*
- * Note: the necessary preallocation was done in
- * nfs4_alloc_stateid(). The idr code caps the number of
- * preallocations that can exist at a time, but the state lock
- * prevents anyone from using ours before we get here:
- */
- WARN_ON_ONCE(error);
- /*
- * It shouldn't be a problem to reuse an opaque stateid value.
- * I don't think it is for 4.1. But with 4.0 I worry that, for
- * example, a stray write retransmission could be accepted by
- * the server when it should have been rejected. Therefore,
- * adopt a trick from the sctp code to attempt to maximize the
- * amount of time until an id is reused, by ensuring they always
- * "increase" (mod INT_MAX):
- */
-
- min_stateid = new_stid+1;
- if (min_stateid == INT_MAX)
- min_stateid = 0;
- return new_stid;
-}
-
static struct nfs4_stid *nfs4_alloc_stid(struct nfs4_client *cl, struct
kmem_cache *slab)
{
if (!stid)
return NULL;
- if (!idr_pre_get(stateids, GFP_KERNEL))
- goto out_free;
- if (idr_get_new_above(stateids, stid, min_stateid, &new_id))
+ new_id = idr_alloc(stateids, stid, min_stateid, 0, GFP_KERNEL);
+ if (new_id < 0)
goto out_free;
stid->sc_client = cl;
stid->sc_type = 0;
{
if (rp->c_type == RC_REPLBUFF)
kfree(rp->c_replvec.iov_base);
- hlist_del(&rp->c_hash);
+ if (!hlist_unhashed(&rp->c_hash))
+ hlist_del(&rp->c_hash);
list_del(&rp->c_lru);
--num_drc_entries;
kmem_cache_free(drc_slab, rp);
int nfsd_reply_cache_init(void)
{
+ INIT_LIST_HEAD(&lru_head);
+ max_drc_entries = nfsd_cache_size_limit();
+ num_drc_entries = 0;
+
register_shrinker(&nfsd_reply_cache_shrinker);
drc_slab = kmem_cache_create("nfsd_drc", sizeof(struct svc_cacherep),
0, 0, NULL);
if (!cache_hash)
goto out_nomem;
- INIT_LIST_HEAD(&lru_head);
- max_drc_entries = nfsd_cache_size_limit();
- num_drc_entries = 0;
-
return 0;
out_nomem:
printk(KERN_ERR "nfsd: failed to allocate reply cache\n");
int host_err;
int stable = *stablep;
int use_wgather;
+ loff_t pos = offset;
dentry = file->f_path.dentry;
inode = dentry->d_inode;
/* Write the data. */
oldfs = get_fs(); set_fs(KERNEL_DS);
- host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
+ host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &pos);
set_fs(oldfs);
if (host_err < 0)
goto out_nfserr;
{
int ret = -ENOENT;
+ if (!(filp->f_mode & (FMODE_READ|FMODE_WRITE)))
+ return -EINVAL;
+
mutex_lock(&inode->i_mutex);
if (inode->i_pipe) {
#include <linux/mnt_namespace.h>
#include <linux/mount.h>
#include <linux/fs.h>
+#include <linux/nsproxy.h>
#include "internal.h"
#include "pnode.h"
int propagate_mnt(struct mount *dest_mnt, struct dentry *dest_dentry,
struct mount *source_mnt, struct list_head *tree_list)
{
+ struct user_namespace *user_ns = current->nsproxy->mnt_ns->user_ns;
struct mount *m, *child;
int ret = 0;
struct mount *prev_dest_mnt = dest_mnt;
source = get_source(m, prev_dest_mnt, prev_src_mnt, &type);
+ /* Notice when we are propagating across user namespaces */
+ if (m->mnt_ns->user_ns != user_ns)
+ type |= CL_UNPRIVILEGED;
+
child = copy_tree(source, source->mnt.mnt_root, type);
if (IS_ERR(child)) {
ret = PTR_ERR(child);
#define CL_MAKE_SHARED 0x08
#define CL_PRIVATE 0x10
#define CL_SHARED_TO_SLAVE 0x20
+#define CL_UNPRIVILEGED 0x40
static inline void set_mnt_shared(struct mount *mnt)
{
struct inode *proc_get_inode(struct super_block *sb, struct proc_dir_entry *de)
{
- struct inode *inode = iget_locked(sb, de->low_ino);
+ struct inode *inode = new_inode_pseudo(sb);
- if (inode && (inode->i_state & I_NEW)) {
+ if (inode) {
+ inode->i_ino = de->low_ino;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
PROC_I(inode)->pde = de;
inode->i_fop = de->proc_fops;
}
}
- unlock_new_inode(inode);
} else
pde_put(de);
return inode;
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/user_namespace.h>
#include <linux/mount.h>
#include <linux/pid_namespace.h>
#include <linux/parser.h>
} else {
ns = task_active_pid_ns(current);
options = data;
+
+ if (!current_user_ns()->may_mount_proc)
+ return ERR_PTR(-EPERM);
}
sb = sget(fs_type, proc_test_super, proc_set_super, flags, ns);
* did a write before quota was turned on
*/
rsv = inode_get_rsv_space(inode);
- if (unlikely(rsv))
+ if (unlikely(rsv)) {
+ spin_lock(&dq_data_lock);
dquot_resv_space(inode->i_dquot[cnt], rsv);
+ spin_unlock(&dq_data_lock);
+ }
}
}
out_err:
#include <linux/splice.h>
#include <linux/compat.h>
#include "read_write.h"
+#include "internal.h"
#include <asm/uaccess.h>
#include <asm/unistd.h>
EXPORT_SYMBOL(do_sync_write);
+ssize_t __kernel_write(struct file *file, const char *buf, size_t count, loff_t *pos)
+{
+ mm_segment_t old_fs;
+ const char __user *p;
+ ssize_t ret;
+
+ if (!file->f_op || (!file->f_op->write && !file->f_op->aio_write))
+ return -EINVAL;
+
+ old_fs = get_fs();
+ set_fs(get_ds());
+ p = (__force const char __user *)buf;
+ if (count > MAX_RW_COUNT)
+ count = MAX_RW_COUNT;
+ if (file->f_op->write)
+ ret = file->f_op->write(file, p, count, pos);
+ else
+ ret = do_sync_write(file, p, count, pos);
+ set_fs(old_fs);
+ if (ret > 0) {
+ fsnotify_modify(file);
+ add_wchar(current, ret);
+ }
+ inc_syscw(current);
+ return ret;
+}
+
ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_t *pos)
{
ssize_t ret;
"on filesystem root.");
return 0;
}
- qf_names[qtype] =
- kmalloc(strlen(arg) + 1, GFP_KERNEL);
+ qf_names[qtype] = kstrdup(arg, GFP_KERNEL);
if (!qf_names[qtype]) {
reiserfs_warning(s, "reiserfs-2502",
"not enough memory "
"quotafile name.");
return 0;
}
- strcpy(qf_names[qtype], arg);
if (qtype == USRQUOTA)
*mount_options |= 1 << REISERFS_USRQUOTA;
else
#include <linux/security.h>
#include <linux/gfp.h>
#include <linux/socket.h>
+#include "internal.h"
/*
* Attempt to steal a page from a pipe buffer. This should perhaps go into
{
int ret;
void *data;
+ loff_t tmp = sd->pos;
data = buf->ops->map(pipe, buf, 0);
- ret = kernel_write(sd->u.file, data + buf->offset, sd->len, sd->pos);
+ ret = __kernel_write(sd->u.file, data + buf->offset, sd->len, &tmp);
buf->ops->unmap(pipe, buf, data);
return ret;
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV
};
+MODULE_ALIAS_FS("squashfs");
static const struct super_operations squashfs_super_ops = {
.alloc_inode = squashfs_alloc_inode,
ino = parent_sd->s_ino;
if (filldir(dirent, ".", 1, filp->f_pos, ino, DT_DIR) == 0)
filp->f_pos++;
+ else
+ return 0;
}
if (filp->f_pos == 1) {
if (parent_sd->s_parent)
ino = parent_sd->s_ino;
if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) == 0)
filp->f_pos++;
+ else
+ return 0;
}
mutex_lock(&sysfs_mutex);
for (pos = sysfs_dir_pos(ns, parent_sd, filp->f_pos, pos);
return 0;
}
+static loff_t sysfs_dir_llseek(struct file *file, loff_t offset, int whence)
+{
+ struct inode *inode = file_inode(file);
+ loff_t ret;
+
+ mutex_lock(&inode->i_mutex);
+ ret = generic_file_llseek(file, offset, whence);
+ mutex_unlock(&inode->i_mutex);
+
+ return ret;
+}
const struct file_operations sysfs_dir_operations = {
.read = generic_read_dir,
.readdir = sysfs_readdir,
.release = sysfs_dir_release,
- .llseek = generic_file_llseek,
+ .llseek = sysfs_dir_llseek,
};
#include <linux/module.h>
#include <linux/magic.h>
#include <linux/slab.h>
+#include <linux/user_namespace.h>
#include "sysfs.h"
struct super_block *sb;
int error;
+ if (!(flags & MS_KERNMOUNT) && !current_user_ns()->may_mount_sysfs)
+ return ERR_PTR(-EPERM);
+
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return ERR_PTR(-ENOMEM);
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("v7");
+MODULE_ALIAS("v7");
static int __init init_sysv_fs(void)
{
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
+MODULE_ALIAS_FS("udf");
static struct kmem_cache *udf_inode_cachep;
int size;
int i;
+ /*
+ * Make sure we capture only current IO errors rather than stale errors
+ * left over from previous use of the buffer (e.g. failed readahead).
+ */
+ bp->b_error = 0;
+
if (bp->b_flags & XBF_WRITE) {
if (bp->b_flags & XBF_SYNCIO)
rw = WRITE_SYNC;
* rather than falling short due to things like stripe unit/width alignment of
* real extents.
*/
-STATIC int
+STATIC xfs_fsblock_t
xfs_iomap_eof_prealloc_initial_size(
struct xfs_mount *mp,
struct xfs_inode *ip,
* have a large file on a small filesystem and the above
* lowspace thresholds are smaller than MAXEXTLEN.
*/
- while (alloc_blocks >= freesp)
+ while (alloc_blocks && alloc_blocks >= freesp)
alloc_blocks >>= 4;
}
if a _PPC object exists, rmmod is disallowed then */
int acpi_processor_notify_smm(struct module *calling_module);
+/* parsing the _P* objects. */
+extern int acpi_processor_get_performance_info(struct acpi_processor *pr);
+
/* for communication between multiple parts of the processor kernel module */
DECLARE_PER_CPU(struct acpi_processor *, processors);
extern struct acpi_processor_errata errata;
#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
static inline int __atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
*/
#include <asm-generic/cmpxchg-local.h>
+#ifndef cmpxchg_local
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+ (unsigned long)(n), sizeof(*(ptr))))
+#endif
+
+#ifndef cmpxchg64_local
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
#define cmpxchg(ptr, o, n) cmpxchg_local((ptr), (o), (n))
#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n))
{0x1002, 0x9908, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9909, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x990A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
- {0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9910, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9913, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9917, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9993, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9994, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9995, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9996, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9997, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9998, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9999, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x999A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x999B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
}, \
.reg = _reg, \
.shift = _shift, \
- .width = _width, \
+ .mask = BIT(_width) - 1, \
.flags = _mux_flags, \
.lock = _lock, \
}; \
* undo any work done in the @prepare callback. Called with
* prepare_lock held.
*
+ * @is_prepared: Queries the hardware to determine if the clock is prepared.
+ * This function is allowed to sleep. Optional, if this op is not
+ * set then the prepare count will be used.
+ *
+ * @unprepare_unused: Unprepare the clock atomically. Only called from
+ * clk_disable_unused for prepare clocks with special needs.
+ * Called with prepare mutex held. This function may sleep.
+ *
* @enable: Enable the clock atomically. This must not return until the
* clock is generating a valid clock signal, usable by consumer
* devices. Called with enable_lock held. This function must not
struct clk_ops {
int (*prepare)(struct clk_hw *hw);
void (*unprepare)(struct clk_hw *hw);
+ int (*is_prepared)(struct clk_hw *hw);
+ void (*unprepare_unused)(struct clk_hw *hw);
int (*enable)(struct clk_hw *hw);
void (*disable)(struct clk_hw *hw);
int (*is_enabled)(struct clk_hw *hw);
* CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
* register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is
* the raw value read from the register, with the value of zero considered
- * invalid
+ * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
* CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
* the hardware register
+ * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have
+ * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
+ * Some hardware implementations gracefully handle this case and allow a
+ * zero divisor by not modifying their input clock
+ * (divide by one / bypass).
*/
struct clk_divider {
struct clk_hw hw;
#define CLK_DIVIDER_ONE_BASED BIT(0)
#define CLK_DIVIDER_POWER_OF_TWO BIT(1)
+#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
extern const struct clk_ops clk_divider_ops;
struct clk *clk_register_divider(struct device *dev, const char *name,
* @reg: register controlling multiplexer
* @shift: shift to multiplexer bit field
* @width: width of mutliplexer bit field
- * @num_clks: number of parent clocks
+ * @flags: hardware-specific flags
* @lock: register lock
*
* Clock with multiple selectable parents. Implements .get_parent, .set_parent
struct clk_mux {
struct clk_hw hw;
void __iomem *reg;
+ u32 *table;
+ u32 mask;
u8 shift;
- u8 width;
u8 flags;
spinlock_t *lock;
};
#define CLK_MUX_INDEX_BIT BIT(1)
extern const struct clk_ops clk_mux_ops;
+
struct clk *clk_register_mux(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock);
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+
/**
* struct clk_fixed_factor - fixed multiplier and divider clock
*
const char *parent_name, unsigned long flags,
unsigned int mult, unsigned int div);
+/***
+ * struct clk_composite - aggregate clock of mux, divider and gate clocks
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @mux_hw: handle between composite and hardware-specifix mux clock
+ * @div_hw: handle between composite and hardware-specifix divider clock
+ * @gate_hw: handle between composite and hardware-specifix gate clock
+ * @mux_ops: clock ops for mux
+ * @div_ops: clock ops for divider
+ * @gate_ops: clock ops for gate
+ */
+struct clk_composite {
+ struct clk_hw hw;
+ struct clk_ops ops;
+
+ struct clk_hw *mux_hw;
+ struct clk_hw *div_hw;
+ struct clk_hw *gate_hw;
+
+ const struct clk_ops *mux_ops;
+ const struct clk_ops *div_ops;
+ const struct clk_ops *gate_ops;
+};
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+ const char **parent_names, int num_parents,
+ struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+ struct clk_hw *div_hw, const struct clk_ops *div_ops,
+ struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+ unsigned long flags);
+
/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
unsigned int __clk_get_prepare_count(struct clk *clk);
unsigned long __clk_get_rate(struct clk *clk);
unsigned long __clk_get_flags(struct clk *clk);
+bool __clk_is_prepared(struct clk *clk);
bool __clk_is_enabled(struct clk *clk);
struct clk *__clk_lookup(const char *name);
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_CLK_MXS_H
+#define __LINUX_CLK_MXS_H
+
+int mx23_clocks_init(void);
+int mx28_clocks_init(void);
+int mxs_saif_clkmux_select(unsigned int clkmux);
+
+#endif
--- /dev/null
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+void __init sunxi_init_clocks(void);
+
+#endif
extern int clocksource_i8253_init(void);
+struct device_node;
+typedef void(*clocksource_of_init_fn)(struct device_node *);
#ifdef CONFIG_CLKSRC_OF
extern void clocksource_of_init(void);
#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
static const struct of_device_id __clksrc_of_table_##name \
__used __section(__clksrc_of_table) \
- = { .compatible = compat, .data = fn };
+ = { .compatible = compat, \
+ .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn }
#else
-#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
+static inline void clocksource_of_init(void) {}
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
+ static const struct of_device_id __clksrc_of_table_##name \
+ __attribute__((unused)) \
+ = { .compatible = compat, \
+ .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn }
#endif
#endif /* _LINUX_CLOCKSOURCE_H */
extern void debug_show_all_locks(void);
extern void debug_show_held_locks(struct task_struct *task);
extern void debug_check_no_locks_freed(const void *from, unsigned long len);
-extern void debug_check_no_locks_held(void);
+extern void debug_check_no_locks_held(struct task_struct *task);
#else
static inline void debug_show_all_locks(void)
{
}
static inline void
-debug_check_no_locks_held(void)
+debug_check_no_locks_held(struct task_struct *task)
{
}
#endif
u32 ue_count; /* Uncorrectable Errors for this csrow */
u32 ce_count; /* Correctable Errors for this csrow */
- u32 nr_pages; /* combined pages count of all channels */
struct mem_ctl_info *mci; /* the parent */
* sees memory sticks ("dimms"), and the ones that sees memory ranks.
* All old memory controllers enumerate memories per rank, but most
* of the recent drivers enumerate memories per DIMM, instead.
- * When the memory controller is per rank, mem_is_per_rank is true.
+ * When the memory controller is per rank, csbased is true.
*/
unsigned n_layers;
struct edac_mc_layer *layers;
- bool mem_is_per_rank;
+ bool csbased;
/*
* DIMM info. Will eventually remove the entire csrows_info some day
u32 fake_inject_ue;
u16 fake_inject_count;
#endif
- __u8 csbased : 1, /* csrow-based memory controller */
- __resv : 7;
};
#endif
#ifndef FREEZER_H_INCLUDED
#define FREEZER_H_INCLUDED
-#include <linux/debug_locks.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/atomic.h>
static inline bool try_to_freeze(void)
{
- if (!(current->flags & PF_NOFREEZE))
- debug_check_no_locks_held();
might_sleep();
if (likely(!freezing(current)))
return false;
spin_unlock(&fs->lock);
}
+extern bool current_chrooted(void);
+
#endif /* _LINUX_FS_STRUCT_H */
*/
#include <asm/types.h>
+#include <linux/compiler.h>
/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
#define GOLDEN_RATIO_PRIME_32 0x9e370001UL
#error Wordsize not 32 or 64
#endif
-static inline u64 hash_64(u64 val, unsigned int bits)
+static __always_inline u64 hash_64(u64 val, unsigned int bits)
{
u64 hash = val;
*/
void *idr_find_slowpath(struct idr *idp, int id);
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask);
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
void idr_preload(gfp_t gfp_mask);
int idr_alloc(struct idr *idp, void *ptr, int start, int end, gfp_t gfp_mask);
int idr_for_each(struct idr *idp,
/**
* idr_find - return pointer for given id
- * @idp: idr handle
+ * @idr: idr handle
* @id: lookup key
*
* Return the pointer given the id it has been registered with. A %NULL
return idr_find_slowpath(idr, id);
}
-/**
- * idr_get_new - allocate new idr entry
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @id: pointer to the allocated handle
- *
- * Simple wrapper around idr_get_new_above() w/ @starting_id of zero.
- */
-static inline int idr_get_new(struct idr *idp, void *ptr, int *id)
-{
- return idr_get_new_above(idp, ptr, 0, id);
-}
-
/**
* idr_for_each_entry - iterate over an idr's elements of a given type
* @idp: idr handle
entry != NULL; \
++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
-void __idr_remove_all(struct idr *idp); /* don't use */
+/*
+ * Don't use the following functions. These exist only to suppress
+ * deprecated warnings on EXPORT_SYMBOL()s.
+ */
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask);
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
+void __idr_remove_all(struct idr *idp);
+
+/**
+ * idr_pre_get - reserve resources for idr allocation
+ * @idp: idr handle
+ * @gfp_mask: memory allocation flags
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+{
+ return __idr_pre_get(idp, gfp_mask);
+}
+
+/**
+ * idr_get_new_above - allocate new idr entry above or equal to a start id
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @starting_id: id to start search at
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new_above(struct idr *idp, void *ptr,
+ int starting_id, int *id)
+{
+ return __idr_get_new_above(idp, ptr, starting_id, id);
+}
+
+/**
+ * idr_get_new - allocate new idr entry
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new(struct idr *idp, void *ptr, int *id)
+{
+ return __idr_get_new_above(idp, ptr, 0, id);
+}
/**
* idr_remove_all - remove all ids from the given idr tree
};
#ifdef CONFIG_IIO_BUFFER
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+#endif
+
+#ifdef CONFIG_IIO_TRIGGER
int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops);
void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
-irqreturn_t st_sensors_trigger_handler(int irq, void *p);
-
-int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
#else
static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops)
#ifdef CONFIG_IRQ_WORK
bool irq_work_needs_cpu(void);
#else
-static bool irq_work_needs_cpu(void) { return false; }
+static inline bool irq_work_needs_cpu(void) { return false; }
#endif
#endif /* _LINUX_IRQ_WORK_H */
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
u32 offset, struct device_node *);
-void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
static inline void gic_init(unsigned int nr, int start,
--- /dev/null
+/*
+ * Chained IRQ handlers support.
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __IRQCHIP_CHAINED_IRQ_H
+#define __IRQCHIP_CHAINED_IRQ_H
+
+#include <linux/irq.h>
+
+/*
+ * Entry/exit functions for chained handlers where the primary IRQ chip
+ * may implement either fasteoi or level-trigger flow control.
+ */
+static inline void chained_irq_enter(struct irq_chip *chip,
+ struct irq_desc *desc)
+{
+ /* FastEOI controllers require no action on entry. */
+ if (chip->irq_eoi)
+ return;
+
+ if (chip->irq_mask_ack) {
+ chip->irq_mask_ack(&desc->irq_data);
+ } else {
+ chip->irq_mask(&desc->irq_data);
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+ }
+}
+
+static inline void chained_irq_exit(struct irq_chip *chip,
+ struct irq_desc *desc)
+{
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+ else
+ chip->irq_unmask(&desc->irq_data);
+}
+
+#endif /* __IRQCHIP_CHAINED_IRQ_H */
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IRQCHIP_MXS_H
+#define __LINUX_IRQCHIP_MXS_H
+
+extern void icoll_handle_irq(struct pt_regs *);
+
+#endif
+++ /dev/null
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_IRQCHIP_SUNXI_H
-#define __LINUX_IRQCHIP_SUNXI_H
-
-#include <asm/exception.h>
-
-extern void sunxi_init_irq(void);
-
-extern asmlinkage void __exception_irq_entry sunxi_handle_irq(
- struct pt_regs *regs);
-
-#endif
unsigned long int_sqrt(unsigned long);
extern void bust_spinlocks(int yes);
-extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
extern int panic_timeout;
extern int panic_on_oops;
pos = n)
#define hlist_entry_safe(ptr, type, member) \
- (ptr) ? hlist_entry(ptr, type, member) : NULL
+ ({ typeof(ptr) ____ptr = (ptr); \
+ ____ptr ? hlist_entry(____ptr, type, member) : NULL; \
+ })
/**
* hlist_for_each_entry - iterate over list of given type
MAX77693_MUIC_REG_END,
};
+/* MAX77693 INTMASK1~2 Register */
+#define INTMASK1_ADC1K_SHIFT 3
+#define INTMASK1_ADCERR_SHIFT 2
+#define INTMASK1_ADCLOW_SHIFT 1
+#define INTMASK1_ADC_SHIFT 0
+#define INTMASK1_ADC1K_MASK (1 << INTMASK1_ADC1K_SHIFT)
+#define INTMASK1_ADCERR_MASK (1 << INTMASK1_ADCERR_SHIFT)
+#define INTMASK1_ADCLOW_MASK (1 << INTMASK1_ADCLOW_SHIFT)
+#define INTMASK1_ADC_MASK (1 << INTMASK1_ADC_SHIFT)
+
+#define INTMASK2_VIDRM_SHIFT 5
+#define INTMASK2_VBVOLT_SHIFT 4
+#define INTMASK2_DXOVP_SHIFT 3
+#define INTMASK2_DCDTMR_SHIFT 2
+#define INTMASK2_CHGDETRUN_SHIFT 1
+#define INTMASK2_CHGTYP_SHIFT 0
+#define INTMASK2_VIDRM_MASK (1 << INTMASK2_VIDRM_SHIFT)
+#define INTMASK2_VBVOLT_MASK (1 << INTMASK2_VBVOLT_SHIFT)
+#define INTMASK2_DXOVP_MASK (1 << INTMASK2_DXOVP_SHIFT)
+#define INTMASK2_DCDTMR_MASK (1 << INTMASK2_DCDTMR_SHIFT)
+#define INTMASK2_CHGDETRUN_MASK (1 << INTMASK2_CHGDETRUN_SHIFT)
+#define INTMASK2_CHGTYP_MASK (1 << INTMASK2_CHGTYP_SHIFT)
+
/* MAX77693 MUIC - STATUS1~3 Register */
#define STATUS1_ADC_SHIFT (0)
#define STATUS1_ADCLOW_SHIFT (5)
};
struct palmas_platform_data {
+ int irq_flags;
int gpio_base;
/* bit value to be loaded to the POWER_CTRL register */
void tps65912_device_exit(struct tps65912 *tps65912);
int tps65912_irq_init(struct tps65912 *tps65912, int irq,
struct tps65912_platform_data *pdata);
+int tps65912_irq_exit(struct tps65912 *tps65912);
#endif /* __LINUX_MFD_TPS65912_H */
#ifndef __MFD_WM831X_AUXADC_H__
#define __MFD_WM831X_AUXADC_H__
+struct wm831x;
+
/*
* R16429 (0x402D) - AuxADC Data
*/
#include <linux/irqdomain.h>
#include <linux/list.h>
#include <linux/regmap.h>
+#include <linux/mfd/wm831x/auxadc.h>
/*
* Register values.
};
struct wm831x;
-enum wm831x_auxadc;
typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x,
enum wm831x_auxadc input);
#define VM_PFNMAP 0x00000400 /* Page-ranges managed without "struct page", just pure PFN */
#define VM_DENYWRITE 0x00000800 /* ETXTBSY on write attempts.. */
-#define VM_POPULATE 0x00001000
#define VM_LOCKED 0x00002000
#define VM_IO 0x00004000 /* Memory mapped I/O or similar */
{
return _calc_vm_trans(flags, MAP_GROWSDOWN, VM_GROWSDOWN ) |
_calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) |
- ((flags & MAP_LOCKED) ? (VM_LOCKED | VM_POPULATE) : 0) |
- (((flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE) ?
- VM_POPULATE : 0);
+ _calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED );
}
#endif /* _LINUX_MMAN_H */
return test_bit(ZONE_OOM_LOCKED, &zone->flags);
}
-static inline unsigned zone_end_pfn(const struct zone *zone)
+static inline unsigned long zone_end_pfn(const struct zone *zone)
{
return zone->zone_start_pfn + zone->spanned_pages;
}
#define MNT_INTERNAL 0x4000
+#define MNT_LOCK_READONLY 0x400000
+
struct vfsmount {
struct dentry *mnt_root; /* root of the mounted tree */
struct super_block *mnt_sb; /* pointer to superblock */
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
-#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
-#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */
+#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
+#define MXSFB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */
struct mxsfb_platform_data {
struct fb_videomode *mode_list;
* allocated. If specified,fb_size must also be specified.
* fb_phys must be unused by Linux.
*/
+ u32 sync; /* sync mask, contains MXSFB specifics not
+ * carried in fb_info->var.sync
+ */
};
#endif /* __LINUX_MXSFB_H */
NVME_LBAF_RP_DEGRADED = 3,
};
+struct nvme_smart_log {
+ __u8 critical_warning;
+ __u8 temperature[2];
+ __u8 avail_spare;
+ __u8 spare_thresh;
+ __u8 percent_used;
+ __u8 rsvd6[26];
+ __u8 data_units_read[16];
+ __u8 data_units_written[16];
+ __u8 host_reads[16];
+ __u8 host_writes[16];
+ __u8 ctrl_busy_time[16];
+ __u8 power_cycles[16];
+ __u8 power_on_hours[16];
+ __u8 unsafe_shutdowns[16];
+ __u8 media_errors[16];
+ __u8 num_err_log_entries[16];
+ __u8 rsvd192[320];
+};
+
+enum {
+ NVME_SMART_CRIT_SPARE = 1 << 0,
+ NVME_SMART_CRIT_TEMPERATURE = 1 << 1,
+ NVME_SMART_CRIT_RELIABILITY = 1 << 2,
+ NVME_SMART_CRIT_MEDIA = 1 << 3,
+ NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4,
+};
+
struct nvme_lba_range_type {
__u8 type;
__u8 attributes;
static inline void perf_event_task_tick(void) { }
#endif
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
+extern void perf_restore_debug_store(void);
+#else
+static inline void perf_restore_debug_store(void) { }
+#endif
+
#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
/*
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
- int (*phy_init)(struct platform_device *pdev, int type);
- int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_OHCI_H
+#define __MACH_EXYNOS_OHCI_H
+
+struct exynos4_ohci_platdata {
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
+
+#endif /* __MACH_EXYNOS_OHCI_H */
extern int dmesg_restrict;
extern int kptr_restrict;
+extern void wake_up_klogd(void);
+
void log_buf_kexec_setup(void);
void __init setup_log_buf(int early);
#else
return false;
}
+static inline void wake_up_klogd(void)
+{
+}
+
static inline void log_buf_kexec_setup(void)
{
}
*/
#include <linux/cgroup.h>
+#include <linux/errno.h>
/*
* The core object. the cgroup that wishes to account for some
union {
__u32 mark;
__u32 dropcount;
- __u32 avail_size;
+ __u32 reserved_tailroom;
};
sk_buff_data_t inner_transport_header;
* do not lose pfmemalloc information as the pages would not be
* allocated using __GFP_MEMALLOC.
*/
- if (page->pfmemalloc && !page->mapping)
- skb->pfmemalloc = true;
frag->page.p = page;
frag->page_offset = off;
skb_frag_size_set(frag, size);
+
+ page = compound_head(page);
+ if (page->pfmemalloc && !page->mapping)
+ skb->pfmemalloc = true;
}
/**
*/
static inline int skb_availroom(const struct sk_buff *skb)
{
- return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len;
+ if (skb_is_nonlinear(skb))
+ return 0;
+
+ return skb->end - skb->tail - skb->reserved_tailroom;
}
/**
+++ /dev/null
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __SUNXI_TIMER_H
-#define __SUNXI_TIMER_H
-
-#include <asm/mach/time.h>
-
-void sunxi_timer_init(void);
-
-#endif
/* Adding event notification support elements */
#define THERMAL_GENL_FAMILY_NAME "thermal_event"
#define THERMAL_GENL_VERSION 0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group"
+#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_grp"
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
* For encapsulation sockets.
*/
int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+ void (*encap_destroy)(struct sock *sk);
};
static inline struct udp_sock *udp_sk(const struct sock *sk)
u16 connected;
};
+extern u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf);
extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign);
* @name: For diagnostics, identifies the function.
* @strings: tables of strings, keyed by identifiers assigned during bind()
* and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at full speed (or at low speed).
* @hs_descriptors: Table of high speed descriptors, using interface and
* after function notifications
* @resume: Notifies configuration when the host restarts USB traffic,
* before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
*
* Devices default to reporting self powered operation. Devices which rely
* on bus powered operation should report this in their @bind method.
*/
int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
struct usb_device *, enum usb3_link_state state);
+ int (*find_raw_port_number)(struct usb_hcd *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
struct platform_device;
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
* port.
* @flags: usb serial port flags
* @write_wait: a wait_queue_head_t used by the port.
+ * @delta_msr_wait: modem-status-change wait queue
* @work: work queue entry for the line discipline waking up.
* @throttled: nonzero if the read urb is inactive to throttle the device
* @throttle_req: nonzero if the tty wants to throttle us
unsigned long flags;
wait_queue_head_t write_wait;
+ wait_queue_head_t delta_msr_wait;
struct work_struct work;
char throttled;
char throttle_req;
/*-------------------------------------------------------------------------*/
+#if IS_ENABLED(CONFIG_USB_ULPI)
struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
unsigned int flags);
+#else
+static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+ unsigned int flags)
+{
+ return NULL;
+}
+#endif
#ifdef CONFIG_USB_ULPI_VIEWPORT
/* access ops for controllers with a viewport register */
kuid_t owner;
kgid_t group;
unsigned int proc_inum;
+ bool may_mount_sysfs;
+ bool may_mount_proc;
};
extern struct user_namespace init_user_ns;
#endif
+void update_mnt_policy(struct user_namespace *userns);
+
#endif /* _LINUX_USER_H */
static inline struct neighbour *dst_neigh_lookup(const struct dst_entry *dst, const void *daddr)
{
- return dst->ops->neigh_lookup(dst, NULL, daddr);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, NULL, daddr);
+ return IS_ERR(n) ? NULL : n;
}
static inline struct neighbour *dst_neigh_lookup_skb(const struct dst_entry *dst,
struct sk_buff *skb)
{
- return dst->ops->neigh_lookup(dst, skb, NULL);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, skb, NULL);
+ return IS_ERR(n) ? NULL : n;
}
static inline void dst_link_failure(struct sk_buff *skb)
__be32 ports;
__be16 port16[2];
};
+ u16 thoff;
u8 ip_proto;
};
#define INETFRAGS_HASHSZ 64
+/* averaged:
+ * max_depth = default ipfrag_high_thresh / INETFRAGS_HASHSZ /
+ * rounded up (SKB_TRUELEN(0) + sizeof(struct ipq or
+ * struct frag_queue))
+ */
+#define INETFRAGS_MAXDEPTH 128
+
struct inet_frags {
struct hlist_head hash[INETFRAGS_HASHSZ];
/* This rwlock is a global lock (seperate per IPv4, IPv6 and
struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
struct inet_frags *f, void *key, unsigned int hash)
__releases(&f->lock);
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix);
static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f)
{
};
#ifdef CONFIG_IP_ROUTE_MULTIPATH
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel])
-
-#define FIB_TABLE_HASHSZ 2
-
#else /* CONFIG_IP_ROUTE_MULTIPATH */
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[0])
+#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#ifdef CONFIG_IP_MULTIPLE_TABLES
#define FIB_TABLE_HASHSZ 256
-
-#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#else
+#define FIB_TABLE_HASHSZ 2
+#endif
extern __be32 fib_info_update_nh_saddr(struct net *net, struct fib_nh *nh);
int sysctl_sync_retries;
int sysctl_nat_icmp_send;
int sysctl_pmtu_disc;
+ int sysctl_backup_only;
/* ip_vs_lblc */
int sysctl_lblc_expiration;
return ipvs->sysctl_pmtu_disc;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return ipvs->sync_state & IP_VS_STATE_BACKUP &&
+ ipvs->sysctl_backup_only;
+}
+
#else
static inline int sysctl_sync_threshold(struct netns_ipvs *ipvs)
return 1;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return 0;
+}
+
#endif
/*
{
struct iphdr *iph = ip_hdr(skb);
- if (iph->frag_off & htons(IP_DF))
- iph->id = 0;
- else {
- /* Use inner packet iph-id if possible. */
- if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
- iph->id = old_iph->id;
- else
- __ip_select_ident(iph, dst,
- (skb_shinfo(skb)->gso_segs ?: 1) - 1);
- }
+ /* Use inner packet iph-id if possible. */
+ if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
+ iph->id = old_iph->id;
+ else
+ __ip_select_ident(iph, dst,
+ (skb_shinfo(skb)->gso_segs ?: 1) - 1);
}
#endif
#define ACORE 0x08 /* ... dumped core */
#define AXSIG 0x10 /* ... was killed by a signal */
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */
+#else
+#error unspecified endianness
#endif
#ifndef __KERNEL__
__s64 res2; /* secondary result */
};
-#if defined(__LITTLE_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
#define PADDED(x,y) x, y
-#elif defined(__BIG_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
#define PADDED(x,y) y, x
#else
#error edit for your odd byteorder.
PACKET_DIAG_TX_RING,
PACKET_DIAG_FANOUT,
- PACKET_DIAG_MAX,
+ __PACKET_DIAG_MAX,
};
+#define PACKET_DIAG_MAX (__PACKET_DIAG_MAX - 1)
+
struct packet_diag_info {
__u32 pdi_index;
__u32 pdi_version;
__u32 failed_disks; /* 4 Number of failed disks */
__u32 spare_disks; /* 5 Number of spare disks */
__u32 sb_csum; /* 6 checksum of the whole superblock */
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
__u32 events_hi; /* 7 high-order of superblock update count */
__u32 events_lo; /* 8 low-order of superblock update count */
__u32 cp_events_hi; /* 9 high-order of checkpoint update count */
__u32 cp_events_lo; /* 10 low-order of checkpoint update count */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
__u32 events_lo; /* 7 low-order of superblock update count */
__u32 events_hi; /* 8 high-order of superblock update count */
__u32 cp_events_lo; /* 9 low-order of checkpoint update count */
__u32 cp_events_hi; /* 10 high-order of checkpoint update count */
+#else
+#error unspecified endianness
#endif
__u32 recovery_cp; /* 11 recovery checkpoint sector count */
/* There are only valid for minor_version > 90 */
#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */
#define PORT_BRCM_TRUMANAGE 25
-#define PORT_MAX_8250 25 /* max port ID */
+#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */
+#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */
+#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
+#define PORT_MAX_8250 28 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
UNIX_DIAG_MEMINFO,
UNIX_DIAG_SHUTDOWN,
- UNIX_DIAG_MAX,
+ __UNIX_DIAG_MAX,
};
+#define UNIX_DIAG_MAX (__UNIX_DIAG_MAX - 1)
+
struct unix_diag_vfs {
__u32 udiag_vfs_ino;
__u32 udiag_vfs_dev;
*/
#define ATMEL_LCDC_WIRING_BGR 0
#define ATMEL_LCDC_WIRING_RGB 1
-#define ATMEL_LCDC_WIRING_RGB555 2
/* LCD Controller info data structure, stored in device platform_data */
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
+ bool have_intensity_bit;
};
#define ATMEL_LCDC_DMABADDR1 0x00
uint8_t _pad3;
} __attribute__((__packed__));
+struct blkif_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2; /* only for read/write requests */
+#ifdef CONFIG_X86_64
+ uint32_t _pad3; /* offsetof(blkif_req..,u.other.id)==8*/
+#endif
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_request_rw rw;
struct blkif_request_discard discard;
+ struct blkif_request_other other;
} u;
} __attribute__((__packed__));
#define PHYSDEVOP_pci_device_remove 26
#define PHYSDEVOP_restore_msi_ext 27
+/*
+ * Dom0 should use these two to announce MMIO resources assigned to
+ * MSI-X capable devices won't (prepare) or may (release) change.
+ */
+#define PHYSDEVOP_prepare_msix 30
+#define PHYSDEVOP_release_msix 31
struct physdev_pci_device {
/* IN */
uint16_t seg;
menu "General setup"
-config EXPERIMENTAL
- bool
- default y
-
config BROKEN
bool
int flags, const char *dev_name,
void *data)
{
- if (!(flags & MS_KERNMOUNT))
- data = current->nsproxy->ipc_ns;
+ if (!(flags & MS_KERNMOUNT)) {
+ struct ipc_namespace *ns = current->nsproxy->ipc_ns;
+ /* Don't allow mounting unless the caller has CAP_SYS_ADMIN
+ * over the ipc namespace.
+ */
+ if (!ns_capable(ns->user_ns, CAP_SYS_ADMIN))
+ return ERR_PTR(-EPERM);
+
+ data = ns;
+ }
return mount_ns(fs_type, flags, data, mqueue_fill_super);
}
fd = error;
}
mutex_unlock(&root->d_inode->i_mutex);
- mnt_drop_write(mnt);
+ if (!ro)
+ mnt_drop_write(mnt);
out_putname:
putname(name);
return fd;
if (ctxn < 0)
goto next;
ctx = rcu_dereference(current->perf_event_ctxp[ctxn]);
+ if (ctx)
+ perf_event_task_ctx(ctx, task_event);
}
- if (ctx)
- perf_event_task_ctx(ctx, task_event);
next:
put_cpu_ptr(pmu->pmu_cpu_context);
}
+ if (task_event->task_ctx)
+ perf_event_task_ctx(task_event->task_ctx, task_event);
+
rcu_read_unlock();
}
event->attr.sample_period = NSEC_PER_SEC / freq;
hwc->sample_period = event->attr.sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
+ hwc->last_period = hwc->sample_period;
event->attr.freq = 0;
}
}
/*
* Make sure we are holding no locks:
*/
- debug_check_no_locks_held();
+ debug_check_no_locks_held(tsk);
/*
* We can do this unlocked here. The futex code uses this flag
* just to verify whether the pi state cleanup has been done
if ((clone_flags & (CLONE_NEWNS|CLONE_FS)) == (CLONE_NEWNS|CLONE_FS))
return ERR_PTR(-EINVAL);
+ if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS))
+ return ERR_PTR(-EINVAL);
+
/*
* Thread groups must share signals as well, and detached threads
* can only be started up within the thread group.
* If unsharing a user namespace must also unshare the thread.
*/
if (unshare_flags & CLONE_NEWUSER)
- unshare_flags |= CLONE_THREAD;
+ unshare_flags |= CLONE_THREAD | CLONE_FS;
/*
* If unsharing a pid namespace must also unshare the thread.
*/
* @rw: mapping needs to be read/write (values: VERIFY_READ,
* VERIFY_WRITE)
*
- * Returns a negative error code or 0
+ * Return: a negative error code or 0
+ *
* The key words are stored in *key on success.
*
* For shared mappings, it's (page->index, file_inode(vma->vm_file),
* be "current" except in the case of requeue pi.
* @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0)
*
- * Returns:
- * 0 - ready to wait
- * 1 - acquired the lock
+ * Return:
+ * 0 - ready to wait;
+ * 1 - acquired the lock;
* <0 - error
*
* The hb->lock and futex_key refs shall be held by the caller.
* then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit.
* hb1 and hb2 must be held by the caller.
*
- * Returns:
- * 0 - failed to acquire the lock atomicly
- * 1 - acquired the lock
+ * Return:
+ * 0 - failed to acquire the lock atomically;
+ * 1 - acquired the lock;
* <0 - error
*/
static int futex_proxy_trylock_atomic(u32 __user *pifutex,
* Requeue waiters on uaddr1 to uaddr2. In the requeue_pi case, try to acquire
* uaddr2 atomically on behalf of the top waiter.
*
- * Returns:
- * >=0 - on success, the number of tasks requeued or woken
+ * Return:
+ * >=0 - on success, the number of tasks requeued or woken;
* <0 - on error
*/
static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
* The q->lock_ptr must not be held by the caller. A call to unqueue_me() must
* be paired with exactly one earlier call to queue_me().
*
- * Returns:
- * 1 - if the futex_q was still queued (and we removed unqueued it)
+ * Return:
+ * 1 - if the futex_q was still queued (and we removed unqueued it);
* 0 - if the futex_q was already removed by the waking thread
*/
static int unqueue_me(struct futex_q *q)
* the pi_state owner as well as handle race conditions that may allow us to
* acquire the lock. Must be called with the hb lock held.
*
- * Returns:
- * 1 - success, lock taken
- * 0 - success, lock not taken
+ * Return:
+ * 1 - success, lock taken;
+ * 0 - success, lock not taken;
* <0 - on error (-EFAULT)
*/
static int fixup_owner(u32 __user *uaddr, struct futex_q *q, int locked)
* Return with the hb lock held and a q.key reference on success, and unlocked
* with no q.key reference on failure.
*
- * Returns:
- * 0 - uaddr contains val and hb has been locked
+ * Return:
+ * 0 - uaddr contains val and hb has been locked;
* <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked
*/
static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags,
* the wakeup and return the appropriate error code to the caller. Must be
* called with the hb lock held.
*
- * Returns
- * 0 - no early wakeup detected
- * <0 - -ETIMEDOUT or -ERESTARTNOINTR
+ * Return:
+ * 0 = no early wakeup detected;
+ * <0 = -ETIMEDOUT or -ERESTARTNOINTR
*/
static inline
int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
* @val: the expected value of uaddr
* @abs_time: absolute timeout
* @bitset: 32 bit wakeup bitset set by userspace, defaults to all
- * @clockrt: whether to use CLOCK_REALTIME (1) or CLOCK_MONOTONIC (0)
* @uaddr2: the pi futex we will take prior to returning to user-space
*
* The caller will wait on uaddr and will be requeued by futex_requeue() to
* there was a need to.
*
* We call schedule in futex_wait_queue_me() when we enqueue and return there
- * via the following:
+ * via the following--
* 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue()
* 2) wakeup on uaddr2 after a requeue
* 3) signal
*
* If 4 or 7, we cleanup and return with -ETIMEDOUT.
*
- * Returns:
- * 0 - On success
+ * Return:
+ * 0 - On success;
* <0 - On error
*/
static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags,
}
EXPORT_SYMBOL_GPL(debug_check_no_locks_freed);
-static void print_held_locks_bug(void)
+static void print_held_locks_bug(struct task_struct *curr)
{
if (!debug_locks_off())
return;
printk("\n");
printk("=====================================\n");
- printk("[ BUG: %s/%d still has locks held! ]\n",
- current->comm, task_pid_nr(current));
+ printk("[ BUG: lock held at task exit time! ]\n");
print_kernel_ident();
printk("-------------------------------------\n");
- lockdep_print_held_locks(current);
+ printk("%s/%d is exiting with locks still held!\n",
+ curr->comm, task_pid_nr(curr));
+ lockdep_print_held_locks(curr);
+
printk("\nstack backtrace:\n");
dump_stack();
}
-void debug_check_no_locks_held(void)
+void debug_check_no_locks_held(struct task_struct *task)
{
- if (unlikely(current->lockdep_depth > 0))
- print_held_locks_bug();
+ if (unlikely(task->lockdep_depth > 0))
+ print_held_locks_bug(task);
}
-EXPORT_SYMBOL_GPL(debug_check_no_locks_held);
void debug_show_all_locks(void)
{
int nr;
int rc;
struct task_struct *task, *me = current;
+ int init_pids = thread_group_leader(me) ? 1 : 2;
/* Don't allow any more processes into the pid namespace */
disable_pid_allocation(pid_ns);
*/
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (pid_ns->nr_hashed == 1)
+ if (pid_ns->nr_hashed == init_pids)
break;
schedule();
}
#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */
#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */
-DECLARE_WAIT_QUEUE_HEAD(log_wait);
-
int console_printk[4] = {
DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */
DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */
static DEFINE_RAW_SPINLOCK(logbuf_lock);
#ifdef CONFIG_PRINTK
+DECLARE_WAIT_QUEUE_HEAD(log_wait);
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
return console_locked;
}
-/*
- * Delayed printk version, for scheduler-internal messages:
- */
-#define PRINTK_BUF_SIZE 512
-
-#define PRINTK_PENDING_WAKEUP 0x01
-#define PRINTK_PENDING_SCHED 0x02
-
-static DEFINE_PER_CPU(int, printk_pending);
-static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
-
-static void wake_up_klogd_work_func(struct irq_work *irq_work)
-{
- int pending = __this_cpu_xchg(printk_pending, 0);
-
- if (pending & PRINTK_PENDING_SCHED) {
- char *buf = __get_cpu_var(printk_sched_buf);
- printk(KERN_WARNING "[sched_delayed] %s", buf);
- }
-
- if (pending & PRINTK_PENDING_WAKEUP)
- wake_up_interruptible(&log_wait);
-}
-
-static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
- .func = wake_up_klogd_work_func,
- .flags = IRQ_WORK_LAZY,
-};
-
-void wake_up_klogd(void)
-{
- preempt_disable();
- if (waitqueue_active(&log_wait)) {
- this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
- irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
- }
- preempt_enable();
-}
-
static void console_cont_flush(char *text, size_t size)
{
unsigned long flags;
late_initcall(printk_late_init);
#if defined CONFIG_PRINTK
+/*
+ * Delayed printk version, for scheduler-internal messages:
+ */
+#define PRINTK_BUF_SIZE 512
+
+#define PRINTK_PENDING_WAKEUP 0x01
+#define PRINTK_PENDING_SCHED 0x02
+
+static DEFINE_PER_CPU(int, printk_pending);
+static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
+
+static void wake_up_klogd_work_func(struct irq_work *irq_work)
+{
+ int pending = __this_cpu_xchg(printk_pending, 0);
+
+ if (pending & PRINTK_PENDING_SCHED) {
+ char *buf = __get_cpu_var(printk_sched_buf);
+ printk(KERN_WARNING "[sched_delayed] %s", buf);
+ }
+
+ if (pending & PRINTK_PENDING_WAKEUP)
+ wake_up_interruptible(&log_wait);
+}
+
+static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
+ .func = wake_up_klogd_work_func,
+ .flags = IRQ_WORK_LAZY,
+};
+
+void wake_up_klogd(void)
+{
+ preempt_disable();
+ if (waitqueue_active(&log_wait)) {
+ this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
+ irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
+ }
+ preempt_enable();
+}
int printk_sched(const char *fmt, ...)
{
if (force_default || ka->sa.sa_handler != SIG_IGN)
ka->sa.sa_handler = SIG_DFL;
ka->sa.sa_flags = 0;
+#ifdef __ARCH_HAS_SA_RESTORER
+ ka->sa.sa_restorer = NULL;
+#endif
sigemptyset(&ka->sa.sa_mask);
ka++;
}
/**
* sys_rt_sigpending - examine a pending signal that has been raised
* while blocked
- * @set: stores pending signals
+ * @uset: stores pending signals
* @sigsetsize: size of sigset_t type or larger
*/
SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, uset, size_t, sigsetsize)
char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";
-static int __orderly_poweroff(void)
+static int __orderly_poweroff(bool force)
{
- int argc;
char **argv;
static char *envp[] = {
"HOME=/",
};
int ret;
- argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
- if (argv == NULL) {
+ argv = argv_split(GFP_KERNEL, poweroff_cmd, NULL);
+ if (argv) {
+ ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
+ argv_free(argv);
+ } else {
printk(KERN_WARNING "%s failed to allocate memory for \"%s\"\n",
- __func__, poweroff_cmd);
- return -ENOMEM;
+ __func__, poweroff_cmd);
+ ret = -ENOMEM;
}
- ret = call_usermodehelper_fns(argv[0], argv, envp, UMH_WAIT_EXEC,
- NULL, NULL, NULL);
- argv_free(argv);
+ if (ret && force) {
+ printk(KERN_WARNING "Failed to start orderly shutdown: "
+ "forcing the issue\n");
+ /*
+ * I guess this should try to kick off some daemon to sync and
+ * poweroff asap. Or not even bother syncing if we're doing an
+ * emergency shutdown?
+ */
+ emergency_sync();
+ kernel_power_off();
+ }
return ret;
}
+static bool poweroff_force;
+
+static void poweroff_work_func(struct work_struct *work)
+{
+ __orderly_poweroff(poweroff_force);
+}
+
+static DECLARE_WORK(poweroff_work, poweroff_work_func);
+
/**
* orderly_poweroff - Trigger an orderly system poweroff
* @force: force poweroff if command execution fails
*/
int orderly_poweroff(bool force)
{
- int ret = __orderly_poweroff();
-
- if (ret && force) {
- printk(KERN_WARNING "Failed to start orderly shutdown: "
- "forcing the issue\n");
-
- /*
- * I guess this should try to kick off some daemon to sync and
- * poweroff asap. Or not even bother syncing if we're doing an
- * emergency shutdown?
- */
- emergency_sync();
- kernel_power_off();
- }
-
- return ret;
+ if (force) /* do not override the pending "true" */
+ poweroff_force = true;
+ schedule_work(&poweroff_work);
+ return 0;
}
EXPORT_SYMBOL_GPL(orderly_poweroff);
*/
int tick_check_broadcast_device(struct clock_event_device *dev)
{
- if ((tick_broadcast_device.evtdev &&
+ if ((dev->features & CLOCK_EVT_FEAT_DUMMY) ||
+ (tick_broadcast_device.evtdev &&
tick_broadcast_device.evtdev->rating >= dev->rating) ||
(dev->features & CLOCK_EVT_FEAT_C3STOP))
return 0;
def_bool n
config DYNAMIC_FTRACE
- bool "enable/disable ftrace tracepoints dynamically"
+ bool "enable/disable function tracing dynamically"
depends on FUNCTION_TRACER
depends on HAVE_DYNAMIC_FTRACE
default y
help
- This option will modify all the calls to ftrace dynamically
- (will patch them out of the binary image and replace them
- with a No-Op instruction) as they are called. A table is
- created to dynamically enable them again.
+ This option will modify all the calls to function tracing
+ dynamically (will patch them out of the binary image and
+ replace them with a No-Op instruction) on boot up. During
+ compile time, a table is made of all the locations that ftrace
+ can function trace, and this table is linked into the kernel
+ image. When this is enabled, functions can be individually
+ enabled, and the functions not enabled will not affect
+ performance of the system.
+
+ See the files in /sys/kernel/debug/tracing:
+ available_filter_functions
+ set_ftrace_filter
+ set_ftrace_notrace
This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
otherwise has native performance as long as no tracing is active.
- The changes to the code are done by a kernel thread that
- wakes up once a second and checks to see if any ftrace calls
- were made. If so, it runs stop_machine (stops all CPUS)
- and modifies the code to jump over the call to ftrace.
-
config DYNAMIC_FTRACE_WITH_REGS
def_bool y
depends on DYNAMIC_FTRACE
continue;
}
- hlist_del(&entry->node);
- call_rcu(&entry->rcu, ftrace_free_entry_rcu);
+ hlist_del_rcu(&entry->node);
+ call_rcu_sched(&entry->rcu, ftrace_free_entry_rcu);
}
}
__disable_ftrace_function_probe();
void
update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
{
- struct ring_buffer *buf = tr->buffer;
+ struct ring_buffer *buf;
if (trace_stop_count)
return;
arch_spin_lock(&ftrace_max_lock);
+ buf = tr->buffer;
tr->buffer = max_tr.buffer;
max_tr.buffer = buf;
seq_printf(m, "# MAY BE MISSING FUNCTION EVENTS\n");
}
+#ifdef CONFIG_TRACER_MAX_TRACE
+static void print_snapshot_help(struct seq_file *m, struct trace_iterator *iter)
+{
+ if (iter->trace->allocated_snapshot)
+ seq_printf(m, "#\n# * Snapshot is allocated *\n#\n");
+ else
+ seq_printf(m, "#\n# * Snapshot is freed *\n#\n");
+
+ seq_printf(m, "# Snapshot commands:\n");
+ seq_printf(m, "# echo 0 > snapshot : Clears and frees snapshot buffer\n");
+ seq_printf(m, "# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.\n");
+ seq_printf(m, "# Takes a snapshot of the main buffer.\n");
+ seq_printf(m, "# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)\n");
+ seq_printf(m, "# (Doesn't have to be '2' works with any number that\n");
+ seq_printf(m, "# is not a '0' or '1')\n");
+}
+#else
+/* Should never be called */
+static inline void print_snapshot_help(struct seq_file *m, struct trace_iterator *iter) { }
+#endif
+
static int s_show(struct seq_file *m, void *v)
{
struct trace_iterator *iter = v;
seq_puts(m, "#\n");
test_ftrace_alive(m);
}
- if (iter->trace && iter->trace->print_header)
+ if (iter->snapshot && trace_empty(iter))
+ print_snapshot_help(m, iter);
+ else if (iter->trace && iter->trace->print_header)
iter->trace->print_header(m);
else
trace_default_header(m);
return -EINVAL;
}
-static void set_tracer_flags(unsigned int mask, int enabled)
+/* Some tracers require overwrite to stay enabled */
+int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set)
+{
+ if (tracer->enabled && (mask & TRACE_ITER_OVERWRITE) && !set)
+ return -1;
+
+ return 0;
+}
+
+int set_tracer_flag(unsigned int mask, int enabled)
{
/* do nothing if flag is already set */
if (!!(trace_flags & mask) == !!enabled)
- return;
+ return 0;
+
+ /* Give the tracer a chance to approve the change */
+ if (current_trace->flag_changed)
+ if (current_trace->flag_changed(current_trace, mask, !!enabled))
+ return -EINVAL;
if (enabled)
trace_flags |= mask;
if (mask == TRACE_ITER_RECORD_CMD)
trace_event_enable_cmd_record(enabled);
- if (mask == TRACE_ITER_OVERWRITE)
+ if (mask == TRACE_ITER_OVERWRITE) {
ring_buffer_change_overwrite(global_trace.buffer, enabled);
+#ifdef CONFIG_TRACER_MAX_TRACE
+ ring_buffer_change_overwrite(max_tr.buffer, enabled);
+#endif
+ }
if (mask == TRACE_ITER_PRINTK)
trace_printk_start_stop_comm(enabled);
+
+ return 0;
}
static int trace_set_options(char *option)
{
char *cmp;
int neg = 0;
- int ret = 0;
+ int ret = -ENODEV;
int i;
cmp = strstrip(option);
cmp += 2;
}
+ mutex_lock(&trace_types_lock);
+
for (i = 0; trace_options[i]; i++) {
if (strcmp(cmp, trace_options[i]) == 0) {
- set_tracer_flags(1 << i, !neg);
+ ret = set_tracer_flag(1 << i, !neg);
break;
}
}
/* If no option could be set, test the specific tracer options */
- if (!trace_options[i]) {
- mutex_lock(&trace_types_lock);
+ if (!trace_options[i])
ret = set_tracer_option(current_trace, cmp, neg);
- mutex_unlock(&trace_types_lock);
- }
+
+ mutex_unlock(&trace_types_lock);
return ret;
}
size_t cnt, loff_t *ppos)
{
char buf[64];
+ int ret;
if (cnt >= sizeof(buf))
return -EINVAL;
buf[cnt] = 0;
- trace_set_options(buf);
+ ret = trace_set_options(buf);
+ if (ret < 0)
+ return ret;
*ppos += cnt;
goto out;
trace_branch_disable();
+
+ current_trace->enabled = false;
+
if (current_trace->reset)
current_trace->reset(tr);
}
current_trace = t;
+ current_trace->enabled = true;
trace_branch_enable(tr);
out:
mutex_unlock(&trace_types_lock);
default:
if (current_trace->allocated_snapshot)
tracing_reset_online_cpus(&max_tr);
- else
- ret = -EINVAL;
break;
}
if (val != 0 && val != 1)
return -EINVAL;
- set_tracer_flags(1 << index, val);
+
+ mutex_lock(&trace_types_lock);
+ ret = set_tracer_flag(1 << index, val);
+ mutex_unlock(&trace_types_lock);
+
+ if (ret < 0)
+ return ret;
*ppos += cnt;
enum print_line_t (*print_line)(struct trace_iterator *iter);
/* If you handled the flag setting, return 0 */
int (*set_flag)(u32 old_flags, u32 bit, int set);
+ /* Return 0 if OK with change, else return non-zero */
+ int (*flag_changed)(struct tracer *tracer,
+ u32 mask, int set);
struct tracer *next;
struct tracer_flags *flags;
bool print_max;
bool use_max_tr;
bool allocated_snapshot;
+ bool enabled;
};
void trace_printk_init_buffers(void);
void trace_printk_start_comm(void);
+int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set);
+int set_tracer_flag(unsigned int mask, int enabled);
#undef FTRACE_ENTRY
#define FTRACE_ENTRY(call, struct_name, id, tstruct, print, filter) \
static int trace_type __read_mostly;
-static int save_lat_flag;
+static int save_flags;
static void stop_irqsoff_tracer(struct trace_array *tr, int graph);
static int start_irqsoff_tracer(struct trace_array *tr, int graph);
static void __irqsoff_tracer_init(struct trace_array *tr)
{
- save_lat_flag = trace_flags & TRACE_ITER_LATENCY_FMT;
- trace_flags |= TRACE_ITER_LATENCY_FMT;
+ save_flags = trace_flags;
+
+ /* non overwrite screws up the latency tracers */
+ set_tracer_flag(TRACE_ITER_OVERWRITE, 1);
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, 1);
tracing_max_latency = 0;
irqsoff_trace = tr;
static void irqsoff_tracer_reset(struct trace_array *tr)
{
+ int lat_flag = save_flags & TRACE_ITER_LATENCY_FMT;
+ int overwrite_flag = save_flags & TRACE_ITER_OVERWRITE;
+
stop_irqsoff_tracer(tr, is_graph());
- if (!save_lat_flag)
- trace_flags &= ~TRACE_ITER_LATENCY_FMT;
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, lat_flag);
+ set_tracer_flag(TRACE_ITER_OVERWRITE, overwrite_flag);
}
static void irqsoff_tracer_start(struct trace_array *tr)
.print_line = irqsoff_print_line,
.flags = &tracer_flags,
.set_flag = irqsoff_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_irqsoff,
#endif
.print_line = irqsoff_print_line,
.flags = &tracer_flags,
.set_flag = irqsoff_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_preemptoff,
#endif
.print_line = irqsoff_print_line,
.flags = &tracer_flags,
.set_flag = irqsoff_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_preemptirqsoff,
#endif
static int wakeup_graph_entry(struct ftrace_graph_ent *trace);
static void wakeup_graph_return(struct ftrace_graph_ret *trace);
-static int save_lat_flag;
+static int save_flags;
#define TRACE_DISPLAY_GRAPH 1
static int __wakeup_tracer_init(struct trace_array *tr)
{
- save_lat_flag = trace_flags & TRACE_ITER_LATENCY_FMT;
- trace_flags |= TRACE_ITER_LATENCY_FMT;
+ save_flags = trace_flags;
+
+ /* non overwrite screws up the latency tracers */
+ set_tracer_flag(TRACE_ITER_OVERWRITE, 1);
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, 1);
tracing_max_latency = 0;
wakeup_trace = tr;
static void wakeup_tracer_reset(struct trace_array *tr)
{
+ int lat_flag = save_flags & TRACE_ITER_LATENCY_FMT;
+ int overwrite_flag = save_flags & TRACE_ITER_OVERWRITE;
+
stop_wakeup_tracer(tr);
/* make sure we put back any tasks we are tracing */
wakeup_reset(tr);
- if (!save_lat_flag)
- trace_flags &= ~TRACE_ITER_LATENCY_FMT;
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, lat_flag);
+ set_tracer_flag(TRACE_ITER_OVERWRITE, overwrite_flag);
}
static void wakeup_tracer_start(struct trace_array *tr)
.print_line = wakeup_print_line,
.flags = &tracer_flags,
.set_flag = wakeup_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_wakeup,
#endif
.print_line = wakeup_print_line,
.flags = &tracer_flags,
.set_flag = wakeup_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_wakeup,
#endif
.owner = GLOBAL_ROOT_UID,
.group = GLOBAL_ROOT_GID,
.proc_inum = PROC_USER_INIT_INO,
+ .may_mount_sysfs = true,
+ .may_mount_proc = true,
};
EXPORT_SYMBOL_GPL(init_user_ns);
#include <linux/uaccess.h>
#include <linux/ctype.h>
#include <linux/projid.h>
+#include <linux/fs_struct.h>
static struct kmem_cache *user_ns_cachep __read_mostly;
kgid_t group = new->egid;
int ret;
+ /*
+ * Verify that we can not violate the policy of which files
+ * may be accessed that is specified by the root directory,
+ * by verifing that the root directory is at the root of the
+ * mount namespace which allows all files to be accessed.
+ */
+ if (current_chrooted())
+ return -EPERM;
+
/* The creator needs a mapping in the parent user namespace
* or else we won't be able to reasonably tell userspace who
* created a user_namespace.
set_cred_user_ns(new, ns);
+ update_mnt_policy(ns);
+
return 0;
}
if (atomic_read(¤t->mm->mm_users) > 1)
return -EINVAL;
+ if (current->fs->users != 1)
+ return -EINVAL;
+
if (!ns_capable(user_ns, CAP_SYS_ADMIN))
return -EPERM;
int ret;
mutex_lock(&worker_pool_idr_mutex);
- idr_pre_get(&worker_pool_idr, GFP_KERNEL);
- ret = idr_get_new(&worker_pool_idr, pool, &pool->id);
+ ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
+ if (ret >= 0)
+ pool->id = ret;
mutex_unlock(&worker_pool_idr_mutex);
- return ret;
+ return ret < 0 ? ret : 0;
}
/*
spin_unlock_irq(&pool->lock);
mutex_unlock(&pool->assoc_mutex);
- }
- /*
- * Call schedule() so that we cross rq->lock and thus can guarantee
- * sched callbacks see the %WORKER_UNBOUND flag. This is necessary
- * as scheduler callbacks may be invoked from other cpus.
- */
- schedule();
+ /*
+ * Call schedule() so that we cross rq->lock and thus can
+ * guarantee sched callbacks see the %WORKER_UNBOUND flag.
+ * This is necessary as scheduler callbacks may be invoked
+ * from other cpus.
+ */
+ schedule();
- /*
- * Sched callbacks are disabled now. Zap nr_running. After this,
- * nr_running stays zero and need_more_worker() and keep_working()
- * are always true as long as the worklist is not empty. Pools on
- * @cpu now behave as unbound (in terms of concurrency management)
- * pools which are served by workers tied to the CPU.
- *
- * On return from this function, the current worker would trigger
- * unbound chain execution of pending work items if other workers
- * didn't already.
- */
- for_each_std_worker_pool(pool, cpu)
+ /*
+ * Sched callbacks are disabled now. Zap nr_running.
+ * After this, nr_running stays zero and need_more_worker()
+ * and keep_working() are always true as long as the
+ * worklist is not empty. This pool now behaves as an
+ * unbound (in terms of concurrency management) pool which
+ * are served by workers tied to the pool.
+ */
atomic_set(&pool->nr_running, 0);
+
+ /*
+ * With concurrency management just turned off, a busy
+ * worker blocking could lead to lengthy stalls. Kick off
+ * unbound chain execution of currently pending work items.
+ */
+ spin_lock_irq(&pool->lock);
+ wake_up_worker(pool);
+ spin_unlock_irq(&pool->lock);
+ }
}
/*
*/
#include <linux/kernel.h>
+#include <linux/printk.h>
#include <linux/spinlock.h>
#include <linux/tty.h>
#include <linux/wait.h>
wake_up_klogd();
}
}
-
-
entry = bucket_find_exact(bucket, ref);
if (!entry) {
+ /* must drop lock before calling dma_mapping_error */
+ put_hash_bucket(bucket, &flags);
+
if (dma_mapping_error(ref->dev, ref->dev_addr)) {
err_printk(ref->dev, NULL,
- "DMA-API: device driver tries "
- "to free an invalid DMA memory address\n");
- return;
+ "DMA-API: device driver tries to free an "
+ "invalid DMA memory address\n");
+ } else {
+ err_printk(ref->dev, NULL,
+ "DMA-API: device driver tries to free DMA "
+ "memory it has not allocated [device "
+ "address=0x%016llx] [size=%llu bytes]\n",
+ ref->dev_addr, ref->size);
}
- err_printk(ref->dev, NULL, "DMA-API: device driver tries "
- "to free DMA memory it has not allocated "
- "[device address=0x%016llx] [size=%llu bytes]\n",
- ref->dev_addr, ref->size);
- goto out;
+ return;
}
if (ref->size != entry->size) {
hash_bucket_del(entry);
dma_entry_free(entry);
-out:
put_hash_bucket(bucket, &flags);
}
ref.dev = dev;
ref.dev_addr = dma_addr;
bucket = get_hash_bucket(&ref, &flags);
- entry = bucket_find_exact(bucket, &ref);
- if (!entry)
- goto out;
+ list_for_each_entry(entry, &bucket->list, list) {
+ if (!exact_match(&ref, entry))
+ continue;
+
+ /*
+ * The same physical address can be mapped multiple
+ * times. Without a hardware IOMMU this results in the
+ * same device addresses being put into the dma-debug
+ * hash multiple times too. This can result in false
+ * positives being reported. Therefore we implement a
+ * best-fit algorithm here which updates the first entry
+ * from the hash which fits the reference value and is
+ * not currently listed as being checked.
+ */
+ if (entry->map_err_type == MAP_ERR_NOT_CHECKED) {
+ entry->map_err_type = MAP_ERR_CHECKED;
+ break;
+ }
+ }
- entry->map_err_type = MAP_ERR_CHECKED;
-out:
put_hash_bucket(bucket, &flags);
}
EXPORT_SYMBOL(debug_dma_mapping_error);
if (layer_idr)
return get_from_free_list(layer_idr);
- /* try to allocate directly from kmem_cache */
- new = kmem_cache_zalloc(idr_layer_cache, gfp_mask);
+ /*
+ * Try to allocate directly from kmem_cache. We want to try this
+ * before preload buffer; otherwise, non-preloading idr_alloc()
+ * users will end up taking advantage of preloading ones. As the
+ * following is allowed to fail for preloaded cases, suppress
+ * warning this time.
+ */
+ new = kmem_cache_zalloc(idr_layer_cache, gfp_mask | __GFP_NOWARN);
if (new)
return new;
* Try to fetch one from the per-cpu preload buffer if in process
* context. See idr_preload() for details.
*/
- if (in_interrupt())
- return NULL;
-
- preempt_disable();
- new = __this_cpu_read(idr_preload_head);
- if (new) {
- __this_cpu_write(idr_preload_head, new->ary[0]);
- __this_cpu_dec(idr_preload_cnt);
- new->ary[0] = NULL;
+ if (!in_interrupt()) {
+ preempt_disable();
+ new = __this_cpu_read(idr_preload_head);
+ if (new) {
+ __this_cpu_write(idr_preload_head, new->ary[0]);
+ __this_cpu_dec(idr_preload_cnt);
+ new->ary[0] = NULL;
+ }
+ preempt_enable();
+ if (new)
+ return new;
}
- preempt_enable();
- return new;
+
+ /*
+ * Both failed. Try kmem_cache again w/o adding __GFP_NOWARN so
+ * that memory allocation failure warning is printed as intended.
+ */
+ return kmem_cache_zalloc(idr_layer_cache, gfp_mask);
}
static void idr_layer_rcu_free(struct rcu_head *head)
}
}
-/**
- * idr_pre_get - reserve resources for idr allocation
- * @idp: idr handle
- * @gfp_mask: memory allocation flags
- *
- * This function should be called prior to calling the idr_get_new* functions.
- * It preallocates enough memory to satisfy the worst possible allocation. The
- * caller should pass in GFP_KERNEL if possible. This of course requires that
- * no spinning locks be held.
- *
- * If the system is REALLY out of memory this function returns %0,
- * otherwise %1.
- */
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask)
{
while (idp->id_free_cnt < MAX_IDR_FREE) {
struct idr_layer *new;
}
return 1;
}
-EXPORT_SYMBOL(idr_pre_get);
+EXPORT_SYMBOL(__idr_pre_get);
/**
* sub_alloc - try to allocate an id without growing the tree depth
* @idp: idr handle
* @starting_id: id to start search at
- * @id: pointer to the allocated handle
* @pa: idr_layer[MAX_IDR_LEVEL] used as backtrack buffer
* @gfp_mask: allocation mask for idr_layer_alloc()
* @layer_idr: optional idr passed to idr_layer_alloc()
idr_mark_full(pa, id);
}
-/**
- * idr_get_new_above - allocate new idr entry above or equal to a start id
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @starting_id: id to start search at
- * @id: pointer to the allocated handle
- *
- * This is the allocate id function. It should be called with any
- * required locks.
- *
- * If allocation from IDR's private freelist fails, idr_get_new_above() will
- * return %-EAGAIN. The caller should retry the idr_pre_get() call to refill
- * IDR's preallocation and then retry the idr_get_new_above() call.
- *
- * If the idr is full idr_get_new_above() will return %-ENOSPC.
- *
- * @id returns a value in the range @starting_id ... %0x7fffffff
- */
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
{
struct idr_layer *pa[MAX_IDR_LEVEL + 1];
int rv;
*id = rv;
return 0;
}
-EXPORT_SYMBOL(idr_get_new_above);
+EXPORT_SYMBOL(__idr_get_new_above);
/**
* idr_preload - preload for idr_alloc()
int ida_pre_get(struct ida *ida, gfp_t gfp_mask)
{
/* allocate idr_layers */
- if (!idr_pre_get(&ida->idr, gfp_mask))
+ if (!__idr_pre_get(&ida->idr, gfp_mask))
return 0;
/* allocate free_bitmap */
config XZ_DEC_POWERPC
bool "PowerPC BCJ filter decoder"
- default y if POWERPC
+ default y if PPC
select XZ_DEC_BCJ
config XZ_DEC_IA64
default "1"
config VIRT_TO_BUS
- def_bool y
- depends on HAVE_VIRT_TO_BUS
+ bool
+ help
+ An architecture should select this if it implements the
+ deprecated interface virt_to_bus(). All new architectures
+ should probably not select this.
+
config MMU_NOTIFIER
bool
struct vm_area_struct *vma;
int err = -EINVAL;
int has_write_lock = 0;
- vm_flags_t vm_flags;
+ vm_flags_t vm_flags = 0;
if (prot)
return err;
unsigned long addr;
struct file *file = get_file(vma->vm_file);
- vm_flags = vma->vm_flags;
- if (!(flags & MAP_NONBLOCK))
- vm_flags |= VM_POPULATE;
- addr = mmap_region(file, start, size, vm_flags, pgoff);
+ addr = mmap_region(file, start, size,
+ vma->vm_flags, pgoff);
fput(file);
if (IS_ERR_VALUE(addr)) {
err = addr;
mutex_unlock(&mapping->i_mmap_mutex);
}
- if (!(flags & MAP_NONBLOCK) && !(vma->vm_flags & VM_POPULATE)) {
- if (!has_write_lock)
- goto get_write_lock;
- vma->vm_flags |= VM_POPULATE;
- }
-
if (vma->vm_flags & VM_LOCKED) {
/*
* drop PG_Mlocked flag for over-mapped range
*/
out:
- vm_flags = vma->vm_flags;
+ if (vma)
+ vm_flags = vma->vm_flags;
if (likely(!has_write_lock))
up_read(&mm->mmap_sem);
else
/* Return the number pages of memory we physically have, in PAGE_SIZE units. */
unsigned long hugetlb_total_pages(void)
{
- struct hstate *h = &default_hstate;
- return h->nr_huge_pages * pages_per_huge_page(h);
+ struct hstate *h;
+ unsigned long nr_total_pages = 0;
+
+ for_each_hstate(h)
+ nr_total_pages += h->nr_huge_pages * pages_per_huge_page(h);
+ return nr_total_pages;
}
static int hugetlb_acct_memory(struct hstate *h, long delta)
for (i = 0; i < MAX_NR_ZONES; i++) {
struct zone *zone = pgdat->node_zones + i;
- if (zone->wait_table)
+ /*
+ * wait_table may be allocated from boot memory,
+ * here only free if it's allocated by vmalloc.
+ */
+ if (is_vmalloc_addr(zone->wait_table))
vfree(zone->wait_table);
}
int retry = 1;
start_pfn = PFN_DOWN(start);
- end_pfn = start_pfn + PFN_DOWN(size);
+ end_pfn = PFN_UP(start + size - 1);
/*
* When CONFIG_MEMCG is on, one memory block may be used by other
newflags = vma->vm_flags & ~VM_LOCKED;
if (on)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
tmp = vma->vm_end;
if (tmp > end)
* range with the first VMA. Also, skip undesirable VMA types.
*/
nend = min(end, vma->vm_end);
- if ((vma->vm_flags & (VM_IO | VM_PFNMAP | VM_POPULATE)) !=
- VM_POPULATE)
+ if (vma->vm_flags & (VM_IO | VM_PFNMAP))
continue;
if (nstart < vma->vm_start)
nstart = vma->vm_start;
struct vm_area_struct * vma, * prev = NULL;
if (flags & MCL_FUTURE)
- current->mm->def_flags |= VM_LOCKED | VM_POPULATE;
+ current->mm->def_flags |= VM_LOCKED;
else
- current->mm->def_flags &= ~(VM_LOCKED | VM_POPULATE);
+ current->mm->def_flags &= ~VM_LOCKED;
if (flags == MCL_FUTURE)
goto out;
newflags = vma->vm_flags & ~VM_LOCKED;
if (flags & MCL_CURRENT)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
/* Ignore errors */
mlock_fixup(vma, &prev, vma->vm_start, vma->vm_end, newflags);
}
addr = mmap_region(file, addr, len, vm_flags, pgoff);
- if (!IS_ERR_VALUE(addr) && (vm_flags & VM_POPULATE))
+ if (!IS_ERR_VALUE(addr) &&
+ ((vm_flags & VM_LOCKED) ||
+ (flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE))
*populate = len;
return addr;
}
if (flags != 0)
return -EINVAL;
- if (!access_ok(VERIFY_READ, lvec, liovcnt * sizeof(*lvec)))
- goto out;
-
- if (!access_ok(VERIFY_READ, rvec, riovcnt * sizeof(*rvec)))
- goto out;
-
if (vm_write)
rc = compat_rw_copy_check_uvector(WRITE, lvec, liovcnt,
UIO_FASTIOV, iovstack_l,
kfree(iov_r);
if (iov_l != iovstack_l)
kfree(iov_l);
-
-out:
return rc;
}
grp = &vlan_info->grp;
- /* Take it out of our own structures, but be sure to interlock with
- * HW accelerating devices or SW vlan input packet processing if
- * VLAN is not 0 (leave it there for 802.1p).
- */
- if (vlan_id)
- vlan_vid_del(real_dev, vlan_id);
-
grp->nr_vlan_devs--;
if (vlan->flags & VLAN_FLAG_MVRP)
vlan_gvrp_uninit_applicant(real_dev);
}
+ /* Take it out of our own structures, but be sure to interlock with
+ * HW accelerating devices or SW vlan input packet processing if
+ * VLAN is not 0 (leave it there for 802.1p).
+ */
+ if (vlan_id)
+ vlan_vid_del(real_dev, vlan_id);
+
/* Get rid of the vlan's reference to real_dev */
dev_put(real_dev);
}
batadv_ogm_packet = (struct batadv_ogm_packet *)packet_buff;
/* unpack the aggregated packets and process them one by one */
- do {
+ while (batadv_iv_ogm_aggr_packet(buff_pos, packet_len,
+ batadv_ogm_packet->tt_num_changes)) {
tt_buff = packet_buff + buff_pos + BATADV_OGM_HLEN;
batadv_iv_ogm_process(ethhdr, batadv_ogm_packet, tt_buff,
packet_pos = packet_buff + buff_pos;
batadv_ogm_packet = (struct batadv_ogm_packet *)packet_pos;
- } while (batadv_iv_ogm_aggr_packet(buff_pos, packet_len,
- batadv_ogm_packet->tt_num_changes));
+ }
kfree_skb(skb);
return NET_RX_SUCCESS;
sco_chan_del(sk, ECONNRESET);
break;
+ case BT_CONNECT2:
case BT_CONNECT:
case BT_DISCONN:
sco_chan_del(sk, ECONNRESET);
goto out;
}
- mdst = br_mdb_get(br, skb);
+ mdst = br_mdb_get(br, skb, vid);
if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb))
br_multicast_deliver(mdst, skb);
else
return 0;
br_warn(br, "adding interface %s with same address "
"as a received packet\n",
- source->dev->name);
+ source ? source->dev->name : br->dev->name);
fdb_delete(br, fdb);
}
if (is_broadcast_ether_addr(dest))
skb2 = skb;
else if (is_multicast_ether_addr(dest)) {
- mdst = br_mdb_get(br, skb);
+ mdst = br_mdb_get(br, skb, vid);
if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb)) {
if ((mdst && mdst->mglist) ||
br_multicast_is_router(br))
port = p->port;
if (port) {
struct br_mdb_entry e;
+ memset(&e, 0, sizeof(e));
e.ifindex = port->dev->ifindex;
e.state = p->state;
if (p->addr.proto == htons(ETH_P_IP))
break;
bpm = nlmsg_data(nlh);
+ memset(bpm, 0, sizeof(*bpm));
bpm->ifindex = dev->ifindex;
if (br_mdb_fill_info(skb, cb, dev) < 0)
goto out;
return -EMSGSIZE;
bpm = nlmsg_data(nlh);
+ memset(bpm, 0, sizeof(*bpm));
bpm->family = AF_BRIDGE;
bpm->ifindex = dev->ifindex;
nest = nla_nest_start(skb, MDBA_MDB);
{
struct br_mdb_entry entry;
+ memset(&entry, 0, sizeof(entry));
entry.ifindex = port->dev->ifindex;
entry.addr.proto = group->proto;
entry.addr.u.ip4 = group->u.ip4;
#endif
struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
- struct sk_buff *skb)
+ struct sk_buff *skb, u16 vid)
{
struct net_bridge_mdb_htable *mdb = rcu_dereference(br->mdb);
struct br_ip ip;
return NULL;
ip.proto = skb->protocol;
+ ip.vid = vid;
switch (skb->protocol) {
case htons(ETH_P_IP):
+ nla_total_size(1) /* IFLA_BRPORT_MODE */
+ nla_total_size(1) /* IFLA_BRPORT_GUARD */
+ nla_total_size(1) /* IFLA_BRPORT_PROTECT */
+ + nla_total_size(1) /* IFLA_BRPORT_FAST_LEAVE */
+ 0;
}
br_set_port_flag(p, tb, IFLA_BRPORT_MODE, BR_HAIRPIN_MODE);
br_set_port_flag(p, tb, IFLA_BRPORT_GUARD, BR_BPDU_GUARD);
br_set_port_flag(p, tb, IFLA_BRPORT_FAST_LEAVE, BR_MULTICAST_FAST_LEAVE);
+ br_set_port_flag(p, tb, IFLA_BRPORT_PROTECT, BR_ROOT_BLOCK);
if (tb[IFLA_BRPORT_COST]) {
err = br_stp_set_path_cost(p, nla_get_u32(tb[IFLA_BRPORT_COST]));
struct net_bridge_port *port,
struct sk_buff *skb);
extern struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
- struct sk_buff *skb);
+ struct sk_buff *skb, u16 vid);
extern void br_multicast_add_port(struct net_bridge_port *port);
extern void br_multicast_del_port(struct net_bridge_port *port);
extern void br_multicast_enable_port(struct net_bridge_port *port);
}
static inline struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
- struct sk_buff *skb)
+ struct sk_buff *skb, u16 vid)
{
return NULL;
}
return 0;
}
+static int __decode_pgid(void **p, void *end, struct ceph_pg *pg)
+{
+ u8 v;
+
+ ceph_decode_need(p, end, 1+8+4+4, bad);
+ v = ceph_decode_8(p);
+ if (v != 1)
+ goto bad;
+ pg->pool = ceph_decode_64(p);
+ pg->seed = ceph_decode_32(p);
+ *p += 4; /* skip preferred */
+ return 0;
+
+bad:
+ dout("error decoding pgid\n");
+ return -EINVAL;
+}
+
/*
* decode a full map.
*/
for (i = 0; i < len; i++) {
int n, j;
struct ceph_pg pgid;
- struct ceph_pg_v1 pgid_v1;
struct ceph_pg_mapping *pg;
- ceph_decode_need(p, end, sizeof(u32) + sizeof(u64), bad);
- ceph_decode_copy(p, &pgid_v1, sizeof(pgid_v1));
- pgid.pool = le32_to_cpu(pgid_v1.pool);
- pgid.seed = le16_to_cpu(pgid_v1.ps);
+ err = __decode_pgid(p, end, &pgid);
+ if (err)
+ goto bad;
+ ceph_decode_need(p, end, sizeof(u32), bad);
n = ceph_decode_32(p);
err = -EINVAL;
if (n > (UINT_MAX - sizeof(*pg)) / sizeof(u32))
u16 version;
ceph_decode_16_safe(p, end, version, bad);
- if (version > 6) {
- pr_warning("got unknown v %d > %d of inc osdmap\n", version, 6);
+ if (version != 6) {
+ pr_warning("got unknown v %d != 6 of inc osdmap\n", version);
goto bad;
}
while (len--) {
struct ceph_pg_mapping *pg;
int j;
- struct ceph_pg_v1 pgid_v1;
struct ceph_pg pgid;
u32 pglen;
- ceph_decode_need(p, end, sizeof(u64) + sizeof(u32), bad);
- ceph_decode_copy(p, &pgid_v1, sizeof(pgid_v1));
- pgid.pool = le32_to_cpu(pgid_v1.pool);
- pgid.seed = le16_to_cpu(pgid_v1.ps);
- pglen = ceph_decode_32(p);
+ err = __decode_pgid(p, end, &pgid);
+ if (err)
+ goto bad;
+ ceph_decode_need(p, end, sizeof(u32), bad);
+ pglen = ceph_decode_32(p);
if (pglen) {
ceph_decode_need(p, end, pglen*sizeof(u32), bad);
return;
}
#endif
- WARN_ON(in_interrupt());
static_key_slow_inc(&netstamp_needed);
}
EXPORT_SYMBOL(net_enable_timestamp);
struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT);
struct packet_offload *ptype;
__be16 type = skb->protocol;
+ int vlan_depth = ETH_HLEN;
while (type == htons(ETH_P_8021Q)) {
- int vlan_depth = ETH_HLEN;
struct vlan_hdr *vh;
if (unlikely(!pskb_may_pull(skb, vlan_depth + VLAN_HLEN)))
}
switch (rx_handler(&skb)) {
case RX_HANDLER_CONSUMED:
+ ret = NET_RX_SUCCESS;
goto unlock;
case RX_HANDLER_ANOTHER:
goto another_round;
* Allow this to run for 2 jiffies since which will allow
* an average latency of 1.5/HZ.
*/
- if (unlikely(budget <= 0 || time_after(jiffies, time_limit)))
+ if (unlikely(budget <= 0 || time_after_eq(jiffies, time_limit)))
goto softnet_break;
local_irq_enable();
/**
* dev_change_carrier - Change device carrier
* @dev: device
- * @new_carries: new value
+ * @new_carrier: new value
*
* Change device carrier
*/
flow->ports = *ports;
}
+ flow->thoff = (u16) nhoff;
+
return true;
}
EXPORT_SYMBOL(skb_flow_dissect);
* report anything.
*/
ivi.spoofchk = -1;
+ memset(ivi.mac, 0, sizeof(ivi.mac));
if (dev->netdev_ops->ndo_get_vf_config(dev, i, &ivi))
break;
vf_mac.vf =
struct rtattr *attr = (void *)nlh + NLMSG_ALIGN(min_len);
while (RTA_OK(attr, attrlen)) {
- unsigned int flavor = attr->rta_type;
+ unsigned int flavor = attr->rta_type & NLA_TYPE_MASK;
if (flavor) {
if (flavor > rta_max[sz_idx])
return -EINVAL;
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/security.h>
+#include <linux/pid_namespace.h>
#include <linux/pid.h>
#include <linux/nsproxy.h>
#include <linux/slab.h>
if (!uid_valid(uid) || !gid_valid(gid))
return -EINVAL;
- if ((creds->pid == task_tgid_vnr(current) || nsown_capable(CAP_SYS_ADMIN)) &&
+ if ((creds->pid == task_tgid_vnr(current) ||
+ ns_capable(current->nsproxy->pid_ns->user_ns, CAP_SYS_ADMIN)) &&
((uid_eq(uid, cred->uid) || uid_eq(uid, cred->euid) ||
uid_eq(uid, cred->suid)) || nsown_capable(CAP_SETUID)) &&
((gid_eq(gid, cred->gid) || gid_eq(gid, cred->egid) ||
if (!netdev->dcbnl_ops->getpermhwaddr)
return -EOPNOTSUPP;
+ memset(perm_addr, 0, sizeof(perm_addr));
netdev->dcbnl_ops->getpermhwaddr(netdev, perm_addr);
return nla_put(skb, DCB_ATTR_PERM_HWADDR, sizeof(perm_addr), perm_addr);
if (ops->ieee_getets) {
struct ieee_ets ets;
+ memset(&ets, 0, sizeof(ets));
err = ops->ieee_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_ETS, sizeof(ets), &ets))
if (ops->ieee_getmaxrate) {
struct ieee_maxrate maxrate;
+ memset(&maxrate, 0, sizeof(maxrate));
err = ops->ieee_getmaxrate(netdev, &maxrate);
if (!err) {
err = nla_put(skb, DCB_ATTR_IEEE_MAXRATE,
if (ops->ieee_getpfc) {
struct ieee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->ieee_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PFC, sizeof(pfc), &pfc))
/* get peer info if available */
if (ops->ieee_peer_getets) {
struct ieee_ets ets;
+ memset(&ets, 0, sizeof(ets));
err = ops->ieee_peer_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_ETS, sizeof(ets), &ets))
if (ops->ieee_peer_getpfc) {
struct ieee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->ieee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_PFC, sizeof(pfc), &pfc))
/* peer info if available */
if (ops->cee_peer_getpg) {
struct cee_pg pg;
+ memset(&pg, 0, sizeof(pg));
err = ops->cee_peer_getpg(netdev, &pg);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PG, sizeof(pg), &pg))
if (ops->cee_peer_getpfc) {
struct cee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->cee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PFC, sizeof(pfc), &pfc))
(memcmp(addr1, addr2, length >> 3) == 0)
/* local link, i.e. FE80::/10 */
-#define is_addr_link_local(a) (((a)->s6_addr16[0]) == 0x80FE)
+#define is_addr_link_local(a) (((a)->s6_addr16[0]) == htons(0xFE80))
/*
* check whether we can compress the IID to 16 bits,
iph->frag_off |= htons(IP_MF);
offset += (skb->len - skb->mac_len - iph->ihl * 4);
} else {
- if (!(iph->frag_off & htons(IP_DF)))
- iph->id = htons(id++);
+ iph->id = htons(id++);
}
iph->tot_len = htons(skb->len - skb->mac_len);
iph->check = 0;
* tcp/dccp_create_openreq_child().
*/
void inet_csk_prepare_forced_close(struct sock *sk)
+ __releases(&sk->sk_lock.slock)
{
/* sk_clone_lock locked the socket and set refcnt to 2 */
bh_unlock_sock(sk);
#include <linux/rtnetlink.h>
#include <linux/slab.h>
+#include <net/sock.h>
#include <net/inet_frag.h>
static void inet_frag_secret_rebuild(unsigned long dummy)
__releases(&f->lock)
{
struct inet_frag_queue *q;
+ int depth = 0;
hlist_for_each_entry(q, &f->hash[hash], list) {
if (q->net == nf && f->match(q, key)) {
read_unlock(&f->lock);
return q;
}
+ depth++;
}
read_unlock(&f->lock);
- return inet_frag_create(nf, f, key);
+ if (depth <= INETFRAGS_MAXDEPTH)
+ return inet_frag_create(nf, f, key);
+ else
+ return ERR_PTR(-ENOBUFS);
}
EXPORT_SYMBOL(inet_frag_find);
+
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix)
+{
+ static const char msg[] = "inet_frag_find: Fragment hash bucket"
+ " list length grew over limit " __stringify(INETFRAGS_MAXDEPTH)
+ ". Dropping fragment.\n";
+
+ if (PTR_ERR(q) == -ENOBUFS)
+ LIMIT_NETDEBUG(KERN_WARNING "%s%s", prefix, msg);
+}
+EXPORT_SYMBOL(inet_frag_maybe_warn_overflow);
hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol);
q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash);
- if (q == NULL)
- goto out_nomem;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct ipq, q);
-
-out_nomem:
- LIMIT_NETDEBUG(KERN_ERR pr_fmt("ip_frag_create: no memory left !\n"));
- return NULL;
}
/* Is the fragment too far ahead to be part of ipq? */
if (dev->header_ops && dev->type == ARPHRD_IPGRE) {
gre_hlen = 0;
- if (skb->protocol == htons(ETH_P_IP))
- tiph = (const struct iphdr *)skb->data;
- else
- tiph = &tunnel->parms.iph;
+ tiph = (const struct iphdr *)skb->data;
} else {
gre_hlen = tunnel->hlen;
tiph = &tunnel->parms.iph;
}
switch (optptr[3]&0xF) {
case IPOPT_TS_TSONLY:
- opt->ts = optptr - iph;
if (skb)
timeptr = &optptr[optptr[2]-1];
opt->ts_needtime = 1;
pp_ptr = optptr + 2;
goto error;
}
- opt->ts = optptr - iph;
if (rt) {
spec_dst_fill(&spec_dst, skb);
memcpy(&optptr[optptr[2]-1], &spec_dst, 4);
pp_ptr = optptr + 2;
goto error;
}
- opt->ts = optptr - iph;
{
__be32 addr;
memcpy(&addr, &optptr[optptr[2]-1], 4);
put_unaligned_be32(midtime, timeptr);
opt->is_changed = 1;
}
- } else {
+ } else if ((optptr[3]&0xF) != IPOPT_TS_PRESPEC) {
unsigned int overflow = optptr[3]>>4;
if (overflow == 15) {
pp_ptr = optptr + 3;
goto error;
}
- opt->ts = optptr - iph;
if (skb) {
optptr[3] = (optptr[3]&0xF)|((overflow+1)<<4);
opt->is_changed = 1;
}
}
+ opt->ts = optptr - iph;
break;
case IPOPT_RA:
if (optlen < 4) {
}
for (i++; i < CONF_NAMESERVERS_MAX; i++)
if (ic_nameservers[i] != NONE)
- pr_cont(", nameserver%u=%pI4\n", i, &ic_nameservers[i]);
+ pr_cont(", nameserver%u=%pI4", i, &ic_nameservers[i]);
+ pr_cont("\n");
#endif /* !SILENT */
return 0;
If unsure, say Y.
-config IP_NF_QUEUE
- tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
- depends on NETFILTER_ADVANCED
- help
- Netfilter has the ability to queue packets to user space: the
- netlink device can be used to access them using this driver.
-
- This option enables the old IPv4-only "ip_queue" implementation
- which has been obsoleted by the new "nfnetlink_queue" code (see
- CONFIG_NETFILTER_NETLINK_QUEUE).
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP_NF_IPTABLES
tristate "IP tables support (required for filtering/masq/NAT)"
default m if NETFILTER_ADVANCED=n
* Make sure that we have exactly size bytes
* available to the caller, no more, no less.
*/
- skb->avail_size = size;
+ skb->reserved_tailroom = skb->end - skb->tail - size;
return skb;
}
__kfree_skb(skb);
if (tcp_is_reno(tp))
tcp_reset_reno_sack(tp);
- if (!how) {
- /* Push undo marker, if it was plain RTO and nothing
- * was retransmitted. */
- tp->undo_marker = tp->snd_una;
- } else {
+ tp->undo_marker = tp->snd_una;
+ if (how) {
tp->sacked_out = 0;
tp->fackets_out = 0;
}
struct inet_sock *inet = inet_sk(sk);
u32 mtu = tcp_sk(sk)->mtu_info;
- /* We are not interested in TCP_LISTEN and open_requests (SYN-ACKs
- * send out by Linux are always <576bytes so they should go through
- * unfragmented).
- */
- if (sk->sk_state == TCP_LISTEN)
- return;
-
dst = inet_csk_update_pmtu(sk, mtu);
if (!dst)
return;
goto out;
if (code == ICMP_FRAG_NEEDED) { /* PMTU discovery (RFC1191) */
+ /* We are not interested in TCP_LISTEN and open_requests
+ * (SYN-ACKs send out by Linux are always <576bytes so
+ * they should go through unfragmented).
+ */
+ if (sk->sk_state == TCP_LISTEN)
+ goto out;
+
tp->mtu_info = info;
if (!sock_owned_by_user(sk)) {
tcp_v4_mtu_reduced(sk);
eat = min_t(int, len, skb_headlen(skb));
if (eat) {
__skb_pull(skb, eat);
- skb->avail_size -= eat;
len -= eat;
if (!len)
return;
goto send_now;
}
- /* Ok, it looks like it is advisable to defer. */
- tp->tso_deferred = 1 | (jiffies << 1);
+ /* Ok, it looks like it is advisable to defer.
+ * Do not rearm the timer if already set to not break TCP ACK clocking.
+ */
+ if (!tp->tso_deferred)
+ tp->tso_deferred = 1 | (jiffies << 1);
return true;
void udp_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
bool slow = lock_sock_fast(sk);
udp_flush_pending_frames(sk);
unlock_sock_fast(sk, slow);
+ if (static_key_false(&udp_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
}
/*
static int __net_init addrconf_init_net(struct net *net)
{
- int err;
+ int err = -ENOMEM;
struct ipv6_devconf *all, *dflt;
- err = -ENOMEM;
- all = &ipv6_devconf;
- dflt = &ipv6_devconf_dflt;
+ all = kmemdup(&ipv6_devconf, sizeof(ipv6_devconf), GFP_KERNEL);
+ if (all == NULL)
+ goto err_alloc_all;
- if (!net_eq(net, &init_net)) {
- all = kmemdup(all, sizeof(ipv6_devconf), GFP_KERNEL);
- if (all == NULL)
- goto err_alloc_all;
+ dflt = kmemdup(&ipv6_devconf_dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
+ if (dflt == NULL)
+ goto err_alloc_dflt;
- dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
- if (dflt == NULL)
- goto err_alloc_dflt;
- } else {
- /* these will be inherited by all namespaces */
- dflt->autoconf = ipv6_defaults.autoconf;
- dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
- }
+ /* these will be inherited by all namespaces */
+ dflt->autoconf = ipv6_defaults.autoconf;
+ dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
net->ipv6.devconf_all = all;
net->ipv6.devconf_dflt = dflt;
* IPv6 multicast router mode is now supported ;)
*/
if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
- !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
+ !(ipv6_addr_type(&hdr->daddr) &
+ (IPV6_ADDR_LOOPBACK|IPV6_ADDR_LINKLOCAL)) &&
likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
/*
* Okay, we try to forward - split and duplicate
static struct xt_target ip6t_npt_target_reg[] __read_mostly = {
{
.name = "SNPT",
+ .table = "mangle",
.target = ip6t_snpt_tg,
.targetsize = sizeof(struct ip6t_npt_tginfo),
.checkentry = ip6t_npt_checkentry,
},
{
.name = "DNPT",
+ .table = "mangle",
.target = ip6t_dnpt_tg,
.targetsize = sizeof(struct ip6t_npt_tginfo),
.checkentry = ip6t_npt_checkentry,
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) "IPv6-nf: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
q = inet_frag_find(&net->nf_frag.frags, &nf_frags, &arg, hash);
local_bh_enable();
- if (q == NULL)
- goto oom;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct frag_queue, q);
-
-oom:
- return NULL;
}
* YOSHIFUJI,H. @USAGI Always remove fragment header to
* calculate ICV correctly.
*/
+
+#define pr_fmt(fmt) "IPv6: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
hash = inet6_hash_frag(id, src, dst, ip6_frags.rnd);
q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash);
- if (q == NULL)
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
return NULL;
-
+ }
return container_of(q, struct frag_queue, q);
}
}
if (type == ICMPV6_PKT_TOOBIG) {
+ /* We are not interested in TCP_LISTEN and open_requests
+ * (SYN-ACKs send out by Linux are always <576bytes so
+ * they should go through unfragmented).
+ */
+ if (sk->sk_state == TCP_LISTEN)
+ goto out;
+
tp->mtu_info = ntohl(info);
if (!sock_owned_by_user(sk))
tcp_v6_mtu_reduced(sk);
void udpv6_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
lock_sock(sk);
udp_v6_flush_pending_frames(sk);
release_sock(sk);
+ if (static_key_false(&udpv6_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
+
inet6_destroy_sock(sk);
}
NULL, NULL, NULL);
/* Check if the we got some results */
- if (!self->cachedaddr)
- return -EAGAIN; /* Didn't find any devices */
+ if (!self->cachedaddr) {
+ err = -EAGAIN; /* Didn't find any devices */
+ goto out;
+ }
daddr = self->cachedaddr;
/* Cleanup */
self->cachedaddr = 0;
struct tty_port *port = &self->port;
DECLARE_WAITQUEUE(wait, current);
int retval;
- int do_clocal = 0, extra_count = 0;
+ int do_clocal = 0;
unsigned long flags;
IRDA_DEBUG(2, "%s()\n", __func__ );
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
- if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
- /* nonblock mode is set or port is not enabled */
+ if (test_bit(TTY_IO_ERROR, &tty->flags)) {
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (filp->f_flags & O_NONBLOCK) {
+ /* nonblock mode is set */
+ if (tty->termios.c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
IRDA_DEBUG(1, "%s(), O_NONBLOCK requested!\n", __func__ );
return 0;
__FILE__, __LINE__, tty->driver->name, port->count);
spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp)) {
- extra_count = 1;
+ if (!tty_hung_up_p(filp))
port->count--;
- }
- spin_unlock_irqrestore(&port->lock, flags);
port->blocked_open++;
+ spin_unlock_irqrestore(&port->lock, flags);
while (1) {
if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!test_bit(ASYNCB_INITIALIZED, &port->flags)) {
__set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
- if (extra_count) {
- /* ++ is not atomic, so this should be protected - Jean II */
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
port->count++;
- spin_unlock_irqrestore(&port->lock, flags);
- }
port->blocked_open--;
+ spin_unlock_irqrestore(&port->lock, flags);
IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n",
__FILE__, __LINE__, tty->driver->name, port->count);
XFRM_POLICY_BLOCK : XFRM_POLICY_ALLOW);
xp->priority = pol->sadb_x_policy_priority;
- sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1];
xp->family = pfkey_sadb_addr2xfrm_addr(sa, &xp->selector.saddr);
if (!xp->family) {
err = -EINVAL;
if (xp->selector.sport)
xp->selector.sport_mask = htons(0xffff);
- sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1];
pfkey_sadb_addr2xfrm_addr(sa, &xp->selector.daddr);
xp->selector.prefixlen_d = sa->sadb_address_prefixlen;
memset(&sel, 0, sizeof(sel));
- sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1];
sel.family = pfkey_sadb_addr2xfrm_addr(sa, &sel.saddr);
sel.prefixlen_s = sa->sadb_address_prefixlen;
sel.proto = pfkey_proto_to_xfrm(sa->sadb_address_proto);
if (sel.sport)
sel.sport_mask = htons(0xffff);
- sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1];
pfkey_sadb_addr2xfrm_addr(sa, &sel.daddr);
sel.prefixlen_d = sa->sadb_address_prefixlen;
sel.proto = pfkey_proto_to_xfrm(sa->sadb_address_proto);
static void l2tp_session_set_header_len(struct l2tp_session *session, int version);
static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel);
-static void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel);
static inline struct l2tp_net *l2tp_pernet(struct net *net)
{
} else {
/* Socket is owned by kernelspace */
sk = tunnel->sock;
+ sock_hold(sk);
}
out:
}
sock_put(sk);
}
+ sock_put(sk);
}
EXPORT_SYMBOL_GPL(l2tp_tunnel_sock_put);
struct sk_buff *skbp;
struct sk_buff *tmp;
u32 ns = L2TP_SKB_CB(skb)->ns;
- struct l2tp_stats *sstats;
spin_lock_bh(&session->reorder_q.lock);
- sstats = &session->stats;
skb_queue_walk_safe(&session->reorder_q, skbp, tmp) {
if (L2TP_SKB_CB(skbp)->ns > ns) {
__skb_queue_before(&session->reorder_q, skbp, skb);
"%s: pkt %hu, inserted before %hu, reorder_q len=%d\n",
session->name, ns, L2TP_SKB_CB(skbp)->ns,
skb_queue_len(&session->reorder_q));
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_oos_packets++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_oos_packets);
goto out;
}
}
{
struct l2tp_tunnel *tunnel = session->tunnel;
int length = L2TP_SKB_CB(skb)->length;
- struct l2tp_stats *tstats, *sstats;
/* We're about to requeue the skb, so return resources
* to its current owner (a socket receive buffer).
*/
skb_orphan(skb);
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- sstats = &session->stats;
- u64_stats_update_begin(&sstats->syncp);
- tstats->rx_packets++;
- tstats->rx_bytes += length;
- sstats->rx_packets++;
- sstats->rx_bytes += length;
- u64_stats_update_end(&tstats->syncp);
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&tunnel->stats.rx_packets);
+ atomic_long_add(length, &tunnel->stats.rx_bytes);
+ atomic_long_inc(&session->stats.rx_packets);
+ atomic_long_add(length, &session->stats.rx_bytes);
if (L2TP_SKB_CB(skb)->has_seq) {
/* Bump our Nr */
{
struct sk_buff *skb;
struct sk_buff *tmp;
- struct l2tp_stats *sstats;
/* If the pkt at the head of the queue has the nr that we
* expect to send up next, dequeue it and any other
*/
start:
spin_lock_bh(&session->reorder_q.lock);
- sstats = &session->stats;
skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
if (time_after(jiffies, L2TP_SKB_CB(skb)->expires)) {
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- sstats->rx_errors++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
+ atomic_long_inc(&session->stats.rx_errors);
l2tp_dbg(session, L2TP_MSG_SEQ,
"%s: oos pkt %u len %d discarded (too old), waiting for %u, reorder_q_len=%d\n",
session->name, L2TP_SKB_CB(skb)->ns,
struct l2tp_tunnel *tunnel = session->tunnel;
int offset;
u32 ns, nr;
- struct l2tp_stats *sstats = &session->stats;
/* The ref count is increased since we now hold a pointer to
* the session. Take care to decrement the refcnt when exiting
"%s: cookie mismatch (%u/%u). Discarding.\n",
tunnel->name, tunnel->tunnel_id,
session->session_id);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_cookie_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_cookie_discards);
goto discard;
}
ptr += session->peer_cookie_len;
l2tp_warn(session, L2TP_MSG_SEQ,
"%s: recv data has no seq numbers when required. Discarding.\n",
session->name);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
goto discard;
}
l2tp_warn(session, L2TP_MSG_SEQ,
"%s: recv data has no seq numbers when required. Discarding.\n",
session->name);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
goto discard;
}
}
* packets
*/
if (L2TP_SKB_CB(skb)->ns != session->nr) {
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
l2tp_dbg(session, L2TP_MSG_SEQ,
"%s: oos pkt %u len %d discarded, waiting for %u, reorder_q_len=%d\n",
session->name, L2TP_SKB_CB(skb)->ns,
return;
discard:
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_errors++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_errors);
kfree_skb(skb);
if (session->deref)
}
EXPORT_SYMBOL(l2tp_recv_common);
+/* Drop skbs from the session's reorder_q
+ */
+int l2tp_session_queue_purge(struct l2tp_session *session)
+{
+ struct sk_buff *skb = NULL;
+ BUG_ON(!session);
+ BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+ while ((skb = skb_dequeue(&session->reorder_q))) {
+ atomic_long_inc(&session->stats.rx_errors);
+ kfree_skb(skb);
+ if (session->deref)
+ (*session->deref)(session);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(l2tp_session_queue_purge);
+
/* Internal UDP receive frame. Do the real work of receiving an L2TP data frame
* here. The skb is not on a list when we get here.
* Returns 0 if the packet was a data packet and was successfully passed on.
u32 tunnel_id, session_id;
u16 version;
int length;
- struct l2tp_stats *tstats;
if (tunnel->sock && l2tp_verify_udp_checksum(tunnel->sock, skb))
goto discard_bad_csum;
discard_bad_csum:
LIMIT_NETDEBUG("%s: UDP: bad checksum\n", tunnel->name);
UDP_INC_STATS_USER(tunnel->l2tp_net, UDP_MIB_INERRORS, 0);
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- tstats->rx_errors++;
- u64_stats_update_end(&tstats->syncp);
+ atomic_long_inc(&tunnel->stats.rx_errors);
kfree_skb(skb);
return 0;
struct l2tp_tunnel *tunnel = session->tunnel;
unsigned int len = skb->len;
int error;
- struct l2tp_stats *tstats, *sstats;
/* Debug */
if (session->send_seq)
error = ip_queue_xmit(skb, fl);
/* Update stats */
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- sstats = &session->stats;
- u64_stats_update_begin(&sstats->syncp);
if (error >= 0) {
- tstats->tx_packets++;
- tstats->tx_bytes += len;
- sstats->tx_packets++;
- sstats->tx_bytes += len;
+ atomic_long_inc(&tunnel->stats.tx_packets);
+ atomic_long_add(len, &tunnel->stats.tx_bytes);
+ atomic_long_inc(&session->stats.tx_packets);
+ atomic_long_add(len, &session->stats.tx_bytes);
} else {
- tstats->tx_errors++;
- sstats->tx_errors++;
+ atomic_long_inc(&tunnel->stats.tx_errors);
+ atomic_long_inc(&session->stats.tx_errors);
}
- u64_stats_update_end(&tstats->syncp);
- u64_stats_update_end(&sstats->syncp);
return 0;
}
/* No longer an encapsulation socket. See net/ipv4/udp.c */
(udp_sk(sk))->encap_type = 0;
(udp_sk(sk))->encap_rcv = NULL;
+ (udp_sk(sk))->encap_destroy = NULL;
break;
case L2TP_ENCAPTYPE_IP:
break;
/* When the tunnel is closed, all the attached sessions need to go too.
*/
-static void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel)
+void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel)
{
int hash;
struct hlist_node *walk;
hlist_del_init(&session->hlist);
- /* Since we should hold the sock lock while
- * doing any unbinding, we need to release the
- * lock we're holding before taking that lock.
- * Hold a reference to the sock so it doesn't
- * disappear as we're jumping between locks.
- */
if (session->ref != NULL)
(*session->ref)(session);
write_unlock_bh(&tunnel->hlist_lock);
- if (tunnel->version != L2TP_HDR_VER_2) {
- struct l2tp_net *pn = l2tp_pernet(tunnel->l2tp_net);
-
- spin_lock_bh(&pn->l2tp_session_hlist_lock);
- hlist_del_init_rcu(&session->global_hlist);
- spin_unlock_bh(&pn->l2tp_session_hlist_lock);
- synchronize_rcu();
- }
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
if (session->session_close != NULL)
(*session->session_close)(session);
if (session->deref != NULL)
(*session->deref)(session);
+ l2tp_session_dec_refcount(session);
+
write_lock_bh(&tunnel->hlist_lock);
/* Now restart from the beginning of this hash
}
write_unlock_bh(&tunnel->hlist_lock);
}
+EXPORT_SYMBOL_GPL(l2tp_tunnel_closeall);
+
+/* Tunnel socket destroy hook for UDP encapsulation */
+static void l2tp_udp_encap_destroy(struct sock *sk)
+{
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+}
/* Really kill the tunnel.
* Come here only when all sessions have been cleared from the tunnel.
return;
sock = sk->sk_socket;
- BUG_ON(!sock);
- /* If the tunnel socket was created directly by the kernel, use the
- * sk_* API to release the socket now. Otherwise go through the
- * inet_* layer to shut the socket down, and let userspace close it.
+ /* If the tunnel socket was created by userspace, then go through the
+ * inet layer to shut the socket down, and let userspace close it.
+ * Otherwise, if we created the socket directly within the kernel, use
+ * the sk API to release it here.
* In either case the tunnel resources are freed in the socket
* destructor when the tunnel socket goes away.
*/
- if (sock->file == NULL) {
- kernel_sock_shutdown(sock, SHUT_RDWR);
- sk_release_kernel(sk);
+ if (tunnel->fd >= 0) {
+ if (sock)
+ inet_shutdown(sock, 2);
} else {
- inet_shutdown(sock, 2);
+ if (sock)
+ kernel_sock_shutdown(sock, SHUT_RDWR);
+ sk_release_kernel(sk);
}
l2tp_tunnel_sock_put(sk);
/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
udp_sk(sk)->encap_type = UDP_ENCAP_L2TPINUDP;
udp_sk(sk)->encap_rcv = l2tp_udp_encap_recv;
+ udp_sk(sk)->encap_destroy = l2tp_udp_encap_destroy;
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == PF_INET6)
udpv6_encap_enable();
*/
int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel)
{
+ l2tp_tunnel_closeall(tunnel);
return (false == queue_work(l2tp_wq, &tunnel->del_work));
}
EXPORT_SYMBOL_GPL(l2tp_tunnel_delete);
*/
void l2tp_session_free(struct l2tp_session *session)
{
- struct l2tp_tunnel *tunnel;
+ struct l2tp_tunnel *tunnel = session->tunnel;
BUG_ON(atomic_read(&session->ref_count) != 0);
- tunnel = session->tunnel;
- if (tunnel != NULL) {
+ if (tunnel) {
BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+ if (session->session_id != 0)
+ atomic_dec(&l2tp_session_count);
+ sock_put(tunnel->sock);
+ session->tunnel = NULL;
+ l2tp_tunnel_dec_refcount(tunnel);
+ }
+
+ kfree(session);
- /* Delete the session from the hash */
+ return;
+}
+EXPORT_SYMBOL_GPL(l2tp_session_free);
+
+/* Remove an l2tp session from l2tp_core's hash lists.
+ * Provides a tidyup interface for pseudowire code which can't just route all
+ * shutdown via. l2tp_session_delete and a pseudowire-specific session_close
+ * callback.
+ */
+void __l2tp_session_unhash(struct l2tp_session *session)
+{
+ struct l2tp_tunnel *tunnel = session->tunnel;
+
+ /* Remove the session from core hashes */
+ if (tunnel) {
+ /* Remove from the per-tunnel hash */
write_lock_bh(&tunnel->hlist_lock);
hlist_del_init(&session->hlist);
write_unlock_bh(&tunnel->hlist_lock);
- /* Unlink from the global hash if not L2TPv2 */
+ /* For L2TPv3 we have a per-net hash: remove from there, too */
if (tunnel->version != L2TP_HDR_VER_2) {
struct l2tp_net *pn = l2tp_pernet(tunnel->l2tp_net);
-
spin_lock_bh(&pn->l2tp_session_hlist_lock);
hlist_del_init_rcu(&session->global_hlist);
spin_unlock_bh(&pn->l2tp_session_hlist_lock);
synchronize_rcu();
}
-
- if (session->session_id != 0)
- atomic_dec(&l2tp_session_count);
-
- sock_put(tunnel->sock);
-
- /* This will delete the tunnel context if this
- * is the last session on the tunnel.
- */
- session->tunnel = NULL;
- l2tp_tunnel_dec_refcount(tunnel);
}
-
- kfree(session);
-
- return;
}
-EXPORT_SYMBOL_GPL(l2tp_session_free);
+EXPORT_SYMBOL_GPL(__l2tp_session_unhash);
/* This function is used by the netlink SESSION_DELETE command and by
pseudowire modules.
*/
int l2tp_session_delete(struct l2tp_session *session)
{
+ if (session->ref)
+ (*session->ref)(session);
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
if (session->session_close != NULL)
(*session->session_close)(session);
-
+ if (session->deref)
+ (*session->ref)(session);
l2tp_session_dec_refcount(session);
-
return 0;
}
EXPORT_SYMBOL_GPL(l2tp_session_delete);
-
/* We come here whenever a session's send_seq, cookie_len or
* l2specific_len parameters are set.
*/
struct sk_buff;
struct l2tp_stats {
- u64 tx_packets;
- u64 tx_bytes;
- u64 tx_errors;
- u64 rx_packets;
- u64 rx_bytes;
- u64 rx_seq_discards;
- u64 rx_oos_packets;
- u64 rx_errors;
- u64 rx_cookie_discards;
- struct u64_stats_sync syncp;
+ atomic_long_t tx_packets;
+ atomic_long_t tx_bytes;
+ atomic_long_t tx_errors;
+ atomic_long_t rx_packets;
+ atomic_long_t rx_bytes;
+ atomic_long_t rx_seq_discards;
+ atomic_long_t rx_oos_packets;
+ atomic_long_t rx_errors;
+ atomic_long_t rx_cookie_discards;
};
struct l2tp_tunnel;
extern struct l2tp_tunnel *l2tp_tunnel_find_nth(struct net *net, int nth);
extern int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp);
+extern void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel);
extern int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel);
extern struct l2tp_session *l2tp_session_create(int priv_size, struct l2tp_tunnel *tunnel, u32 session_id, u32 peer_session_id, struct l2tp_session_cfg *cfg);
+extern void __l2tp_session_unhash(struct l2tp_session *session);
extern int l2tp_session_delete(struct l2tp_session *session);
extern void l2tp_session_free(struct l2tp_session *session);
extern void l2tp_recv_common(struct l2tp_session *session, struct sk_buff *skb, unsigned char *ptr, unsigned char *optr, u16 hdrflags, int length, int (*payload_hook)(struct sk_buff *skb));
+extern int l2tp_session_queue_purge(struct l2tp_session *session);
extern int l2tp_udp_encap_recv(struct sock *sk, struct sk_buff *skb);
extern int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len);
tunnel->sock ? atomic_read(&tunnel->sock->sk_refcnt) : 0,
atomic_read(&tunnel->ref_count));
- seq_printf(m, " %08x rx %llu/%llu/%llu rx %llu/%llu/%llu\n",
+ seq_printf(m, " %08x rx %ld/%ld/%ld rx %ld/%ld/%ld\n",
tunnel->debug,
- (unsigned long long)tunnel->stats.tx_packets,
- (unsigned long long)tunnel->stats.tx_bytes,
- (unsigned long long)tunnel->stats.tx_errors,
- (unsigned long long)tunnel->stats.rx_packets,
- (unsigned long long)tunnel->stats.rx_bytes,
- (unsigned long long)tunnel->stats.rx_errors);
+ atomic_long_read(&tunnel->stats.tx_packets),
+ atomic_long_read(&tunnel->stats.tx_bytes),
+ atomic_long_read(&tunnel->stats.tx_errors),
+ atomic_long_read(&tunnel->stats.rx_packets),
+ atomic_long_read(&tunnel->stats.rx_bytes),
+ atomic_long_read(&tunnel->stats.rx_errors));
if (tunnel->show != NULL)
tunnel->show(m, tunnel);
seq_printf(m, "\n");
}
- seq_printf(m, " %hu/%hu tx %llu/%llu/%llu rx %llu/%llu/%llu\n",
+ seq_printf(m, " %hu/%hu tx %ld/%ld/%ld rx %ld/%ld/%ld\n",
session->nr, session->ns,
- (unsigned long long)session->stats.tx_packets,
- (unsigned long long)session->stats.tx_bytes,
- (unsigned long long)session->stats.tx_errors,
- (unsigned long long)session->stats.rx_packets,
- (unsigned long long)session->stats.rx_bytes,
- (unsigned long long)session->stats.rx_errors);
+ atomic_long_read(&session->stats.tx_packets),
+ atomic_long_read(&session->stats.tx_bytes),
+ atomic_long_read(&session->stats.tx_errors),
+ atomic_long_read(&session->stats.rx_packets),
+ atomic_long_read(&session->stats.rx_bytes),
+ atomic_long_read(&session->stats.rx_errors));
if (session->show != NULL)
session->show(m, session);
static void l2tp_ip_destroy_sock(struct sock *sk)
{
struct sk_buff *skb;
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL)
kfree_skb(skb);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+
sk_refcnt_debug_dec(sk);
}
static void l2tp_ip6_destroy_sock(struct sock *sk)
{
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+
lock_sock(sk);
ip6_flush_pending_frames(sk);
release_sock(sk);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+
inet6_destroy_sock(sk);
}
#if IS_ENABLED(CONFIG_IPV6)
struct ipv6_pinfo *np = NULL;
#endif
- struct l2tp_stats stats;
- unsigned int start;
hdr = genlmsg_put(skb, portid, seq, &l2tp_nl_family, flags,
L2TP_CMD_TUNNEL_GET);
if (nest == NULL)
goto nla_put_failure;
- do {
- start = u64_stats_fetch_begin(&tunnel->stats.syncp);
- stats.tx_packets = tunnel->stats.tx_packets;
- stats.tx_bytes = tunnel->stats.tx_bytes;
- stats.tx_errors = tunnel->stats.tx_errors;
- stats.rx_packets = tunnel->stats.rx_packets;
- stats.rx_bytes = tunnel->stats.rx_bytes;
- stats.rx_errors = tunnel->stats.rx_errors;
- stats.rx_seq_discards = tunnel->stats.rx_seq_discards;
- stats.rx_oos_packets = tunnel->stats.rx_oos_packets;
- } while (u64_stats_fetch_retry(&tunnel->stats.syncp, start));
-
- if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS, stats.tx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_TX_BYTES, stats.tx_bytes) ||
- nla_put_u64(skb, L2TP_ATTR_TX_ERRORS, stats.tx_errors) ||
- nla_put_u64(skb, L2TP_ATTR_RX_PACKETS, stats.rx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_BYTES, stats.rx_bytes) ||
+ if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS,
+ atomic_long_read(&tunnel->stats.tx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_BYTES,
+ atomic_long_read(&tunnel->stats.tx_bytes)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_ERRORS,
+ atomic_long_read(&tunnel->stats.tx_errors)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_PACKETS,
+ atomic_long_read(&tunnel->stats.rx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_BYTES,
+ atomic_long_read(&tunnel->stats.rx_bytes)) ||
nla_put_u64(skb, L2TP_ATTR_RX_SEQ_DISCARDS,
- stats.rx_seq_discards) ||
+ atomic_long_read(&tunnel->stats.rx_seq_discards)) ||
nla_put_u64(skb, L2TP_ATTR_RX_OOS_PACKETS,
- stats.rx_oos_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_ERRORS, stats.rx_errors))
+ atomic_long_read(&tunnel->stats.rx_oos_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_ERRORS,
+ atomic_long_read(&tunnel->stats.rx_errors)))
goto nla_put_failure;
nla_nest_end(skb, nest);
struct nlattr *nest;
struct l2tp_tunnel *tunnel = session->tunnel;
struct sock *sk = NULL;
- struct l2tp_stats stats;
- unsigned int start;
sk = tunnel->sock;
if (nest == NULL)
goto nla_put_failure;
- do {
- start = u64_stats_fetch_begin(&session->stats.syncp);
- stats.tx_packets = session->stats.tx_packets;
- stats.tx_bytes = session->stats.tx_bytes;
- stats.tx_errors = session->stats.tx_errors;
- stats.rx_packets = session->stats.rx_packets;
- stats.rx_bytes = session->stats.rx_bytes;
- stats.rx_errors = session->stats.rx_errors;
- stats.rx_seq_discards = session->stats.rx_seq_discards;
- stats.rx_oos_packets = session->stats.rx_oos_packets;
- } while (u64_stats_fetch_retry(&session->stats.syncp, start));
-
- if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS, stats.tx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_TX_BYTES, stats.tx_bytes) ||
- nla_put_u64(skb, L2TP_ATTR_TX_ERRORS, stats.tx_errors) ||
- nla_put_u64(skb, L2TP_ATTR_RX_PACKETS, stats.rx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_BYTES, stats.rx_bytes) ||
+ if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS,
+ atomic_long_read(&session->stats.tx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_BYTES,
+ atomic_long_read(&session->stats.tx_bytes)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_ERRORS,
+ atomic_long_read(&session->stats.tx_errors)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_PACKETS,
+ atomic_long_read(&session->stats.rx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_BYTES,
+ atomic_long_read(&session->stats.rx_bytes)) ||
nla_put_u64(skb, L2TP_ATTR_RX_SEQ_DISCARDS,
- stats.rx_seq_discards) ||
+ atomic_long_read(&session->stats.rx_seq_discards)) ||
nla_put_u64(skb, L2TP_ATTR_RX_OOS_PACKETS,
- stats.rx_oos_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_ERRORS, stats.rx_errors))
+ atomic_long_read(&session->stats.rx_oos_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_ERRORS,
+ atomic_long_read(&session->stats.rx_errors)))
goto nla_put_failure;
nla_nest_end(skb, nest);
#include <net/ip.h>
#include <net/udp.h>
#include <net/xfrm.h>
+#include <net/inet_common.h>
#include <asm/byteorder.h>
#include <linux/atomic.h>
session->name);
/* Not bound. Nothing we can do, so discard. */
- session->stats.rx_errors++;
+ atomic_long_inc(&session->stats.rx_errors);
kfree_skb(skb);
}
{
struct pppol2tp_session *ps = l2tp_session_priv(session);
struct sock *sk = ps->sock;
- struct sk_buff *skb;
+ struct socket *sock = sk->sk_socket;
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
- if (session->session_id == 0)
- goto out;
-
- if (sk != NULL) {
- lock_sock(sk);
-
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
- pppox_unbind_sock(sk);
- sk->sk_state = PPPOX_DEAD;
- sk->sk_state_change(sk);
- }
-
- /* Purge any queued data */
- skb_queue_purge(&sk->sk_receive_queue);
- skb_queue_purge(&sk->sk_write_queue);
- while ((skb = skb_dequeue(&session->reorder_q))) {
- kfree_skb(skb);
- sock_put(sk);
- }
- release_sock(sk);
+ if (sock) {
+ inet_shutdown(sock, 2);
+ /* Don't let the session go away before our socket does */
+ l2tp_session_inc_refcount(session);
}
-
-out:
return;
}
*/
static void pppol2tp_session_destruct(struct sock *sk)
{
- struct l2tp_session *session;
-
- if (sk->sk_user_data != NULL) {
- session = sk->sk_user_data;
- if (session == NULL)
- goto out;
-
+ struct l2tp_session *session = sk->sk_user_data;
+ if (session) {
sk->sk_user_data = NULL;
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
l2tp_session_dec_refcount(session);
}
-
-out:
return;
}
session = pppol2tp_sock_to_session(sk);
/* Purge any queued data */
- skb_queue_purge(&sk->sk_receive_queue);
- skb_queue_purge(&sk->sk_write_queue);
if (session != NULL) {
- struct sk_buff *skb;
- while ((skb = skb_dequeue(&session->reorder_q))) {
- kfree_skb(skb);
- sock_put(sk);
- }
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
sock_put(sk);
}
+ skb_queue_purge(&sk->sk_receive_queue);
+ skb_queue_purge(&sk->sk_write_queue);
release_sock(sk);
return error;
}
-/* Called when deleting sessions via the netlink interface.
- */
-static int pppol2tp_session_delete(struct l2tp_session *session)
-{
- struct pppol2tp_session *ps = l2tp_session_priv(session);
-
- if (ps->sock == NULL)
- l2tp_session_dec_refcount(session);
-
- return 0;
-}
-
#endif /* CONFIG_L2TP_V3 */
/* getname() support.
static void pppol2tp_copy_stats(struct pppol2tp_ioc_stats *dest,
struct l2tp_stats *stats)
{
- dest->tx_packets = stats->tx_packets;
- dest->tx_bytes = stats->tx_bytes;
- dest->tx_errors = stats->tx_errors;
- dest->rx_packets = stats->rx_packets;
- dest->rx_bytes = stats->rx_bytes;
- dest->rx_seq_discards = stats->rx_seq_discards;
- dest->rx_oos_packets = stats->rx_oos_packets;
- dest->rx_errors = stats->rx_errors;
+ dest->tx_packets = atomic_long_read(&stats->tx_packets);
+ dest->tx_bytes = atomic_long_read(&stats->tx_bytes);
+ dest->tx_errors = atomic_long_read(&stats->tx_errors);
+ dest->rx_packets = atomic_long_read(&stats->rx_packets);
+ dest->rx_bytes = atomic_long_read(&stats->rx_bytes);
+ dest->rx_seq_discards = atomic_long_read(&stats->rx_seq_discards);
+ dest->rx_oos_packets = atomic_long_read(&stats->rx_oos_packets);
+ dest->rx_errors = atomic_long_read(&stats->rx_errors);
}
/* Session ioctl helper.
tunnel->name,
(tunnel == tunnel->sock->sk_user_data) ? 'Y' : 'N',
atomic_read(&tunnel->ref_count) - 1);
- seq_printf(m, " %08x %llu/%llu/%llu %llu/%llu/%llu\n",
+ seq_printf(m, " %08x %ld/%ld/%ld %ld/%ld/%ld\n",
tunnel->debug,
- (unsigned long long)tunnel->stats.tx_packets,
- (unsigned long long)tunnel->stats.tx_bytes,
- (unsigned long long)tunnel->stats.tx_errors,
- (unsigned long long)tunnel->stats.rx_packets,
- (unsigned long long)tunnel->stats.rx_bytes,
- (unsigned long long)tunnel->stats.rx_errors);
+ atomic_long_read(&tunnel->stats.tx_packets),
+ atomic_long_read(&tunnel->stats.tx_bytes),
+ atomic_long_read(&tunnel->stats.tx_errors),
+ atomic_long_read(&tunnel->stats.rx_packets),
+ atomic_long_read(&tunnel->stats.rx_bytes),
+ atomic_long_read(&tunnel->stats.rx_errors));
}
static void pppol2tp_seq_session_show(struct seq_file *m, void *v)
session->lns_mode ? "LNS" : "LAC",
session->debug,
jiffies_to_msecs(session->reorder_timeout));
- seq_printf(m, " %hu/%hu %llu/%llu/%llu %llu/%llu/%llu\n",
+ seq_printf(m, " %hu/%hu %ld/%ld/%ld %ld/%ld/%ld\n",
session->nr, session->ns,
- (unsigned long long)session->stats.tx_packets,
- (unsigned long long)session->stats.tx_bytes,
- (unsigned long long)session->stats.tx_errors,
- (unsigned long long)session->stats.rx_packets,
- (unsigned long long)session->stats.rx_bytes,
- (unsigned long long)session->stats.rx_errors);
+ atomic_long_read(&session->stats.tx_packets),
+ atomic_long_read(&session->stats.tx_bytes),
+ atomic_long_read(&session->stats.tx_errors),
+ atomic_long_read(&session->stats.rx_packets),
+ atomic_long_read(&session->stats.rx_bytes),
+ atomic_long_read(&session->stats.rx_errors));
if (po)
seq_printf(m, " interface %s\n", ppp_dev_name(&po->chan));
static const struct l2tp_nl_cmd_ops pppol2tp_nl_cmd_ops = {
.session_create = pppol2tp_session_create,
- .session_delete = pppol2tp_session_delete,
+ .session_delete = l2tp_session_delete,
};
#endif /* CONFIG_L2TP_V3 */
int ret = -ENODATA;
rcu_read_lock();
- if (local->use_chanctx) {
- chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
- if (chanctx_conf) {
- *chandef = chanctx_conf->def;
- ret = 0;
- }
- } else if (local->open_count == local->monitors) {
- *chandef = local->monitor_chandef;
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (chanctx_conf) {
+ *chandef = chanctx_conf->def;
+ ret = 0;
+ } else if (local->open_count > 0 &&
+ local->open_count == local->monitors &&
+ sdata->vif.type == NL80211_IFTYPE_MONITOR) {
+ if (local->use_chanctx)
+ *chandef = local->monitor_chandef;
+ else
+ cfg80211_chandef_create(chandef,
+ local->_oper_channel,
+ local->_oper_channel_type);
ret = 0;
}
rcu_read_unlock();
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
+ mutex_lock(&local->mtx);
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
netif_carrier_on(dev);
break;
ieee80211_adjust_monitor_flags(sdata, -1);
ieee80211_configure_filter(local);
+ mutex_lock(&local->mtx);
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
break;
case NL80211_IFTYPE_P2P_DEVICE:
/* relies on synchronize_rcu() below */
our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) &
mask) >> shift;
+ if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
+ continue;
+
switch (ap_mcs) {
default:
if (our_mcs <= ap_mcs)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ /*
+ * Stop timers before deleting work items, as timers
+ * could race and re-add the work-items. They will be
+ * re-established on connection.
+ */
+ del_timer_sync(&ifmgd->conn_mon_timer);
+ del_timer_sync(&ifmgd->bcn_mon_timer);
+
/*
* we need to use atomic bitops for the running bits
* only because both timers might fire at the same
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
- cancel_work_sync(&ifmgd->chswitch_work);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
-
- /* these will just be re-established on connection */
- del_timer_sync(&ifmgd->conn_mon_timer);
- del_timer_sync(&ifmgd->bcn_mon_timer);
+ cancel_work_sync(&ifmgd->chswitch_work);
}
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ /*
+ * Make sure some work items will not run after this,
+ * they will not do anything but might not have been
+ * cancelled when disconnecting.
+ */
+ cancel_work_sync(&ifmgd->monitor_work);
+ cancel_work_sync(&ifmgd->beacon_connection_loss_work);
+ cancel_work_sync(&ifmgd->request_smps_work);
+ cancel_work_sync(&ifmgd->csa_connection_drop_work);
+ cancel_work_sync(&ifmgd->chswitch_work);
+
mutex_lock(&ifmgd->mtx);
if (ifmgd->assoc_data)
ieee80211_destroy_assoc_data(sdata, false);
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
}
- sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
if (!ieee80211_tx_prepare(sdata, &tx, skb))
break;
dev_kfree_skb_any(skb);
skb_reset_network_header(skb);
IP_VS_DBG(12, "ICMP for IPIP %pI4->%pI4: mtu=%u\n",
&ip_hdr(skb)->saddr, &ip_hdr(skb)->daddr, mtu);
- rcu_read_lock();
ipv4_update_pmtu(skb, dev_net(skb->dev),
mtu, 0, 0, 0, 0);
- rcu_read_unlock();
/* Client uses PMTUD? */
if (!(cih->frag_off & htons(IP_DF)))
goto ignore_ipip;
}
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
ip_vs_fill_iph_skb(af, skb, &iph);
}
IP_VS_DBG_PKT(11, af, pp, skb, 0, "Incoming packet");
- ipvs = net_ipvs(net);
/* Check the server status */
if (cp->dest && !(cp->dest->flags & IP_VS_DEST_F_AVAILABLE)) {
/* the destination server is not available */
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
if (ip_hdr(skb)->protocol != IPPROTO_ICMP)
return NF_ACCEPT;
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp(skb, &r, hooknum);
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
struct ip_vs_iphdr iphdr;
ip_vs_fill_iph_skb(AF_INET6, skb, &iphdr);
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp_v6(skb, &r, hooknum, &iphdr);
.mode = 0644,
.proc_handler = proc_dointvec,
},
+ {
+ .procname = "backup_only",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
#ifdef CONFIG_IP_VS_DEBUG
{
.procname = "debug_level",
tbl[idx++].data = &ipvs->sysctl_nat_icmp_send;
ipvs->sysctl_pmtu_disc = 1;
tbl[idx++].data = &ipvs->sysctl_pmtu_disc;
+ tbl[idx++].data = &ipvs->sysctl_backup_only;
ipvs->sysctl_hdr = register_net_sysctl(net, "net/ipv4/vs", tbl);
sctp_chunkhdr_t _sctpch, *sch;
unsigned char chunk_type;
int event, next_state;
- int ihl;
+ int ihl, cofs;
#ifdef CONFIG_IP_VS_IPV6
ihl = cp->af == AF_INET ? ip_hdrlen(skb) : sizeof(struct ipv6hdr);
ihl = ip_hdrlen(skb);
#endif
- sch = skb_header_pointer(skb, ihl + sizeof(sctp_sctphdr_t),
- sizeof(_sctpch), &_sctpch);
+ cofs = ihl + sizeof(sctp_sctphdr_t);
+ sch = skb_header_pointer(skb, cofs, sizeof(_sctpch), &_sctpch);
if (sch == NULL)
return;
*/
if ((sch->type == SCTP_CID_COOKIE_ECHO) ||
(sch->type == SCTP_CID_COOKIE_ACK)) {
- sch = skb_header_pointer(skb, (ihl + sizeof(sctp_sctphdr_t) +
- sch->length), sizeof(_sctpch), &_sctpch);
- if (sch) {
- if (sch->type == SCTP_CID_ABORT)
+ int clen = ntohs(sch->length);
+
+ if (clen >= sizeof(sctp_chunkhdr_t)) {
+ sch = skb_header_pointer(skb, cofs + ALIGN(clen, 4),
+ sizeof(_sctpch), &_sctpch);
+ if (sch && sch->type == SCTP_CID_ABORT)
chunk_type = sch->type;
}
}
{
const struct nf_conn_help *help;
const struct nf_conntrack_helper *helper;
+ struct va_format vaf;
+ va_list args;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
/* Called from the helper function, this call never fails */
help = nfct_help(ct);
helper = rcu_dereference(help->helper);
nf_log_packet(nf_ct_l3num(ct), 0, skb, NULL, NULL, NULL,
- "nf_ct_%s: dropping packet: %s ", helper->name, fmt);
+ "nf_ct_%s: dropping packet: %pV ", helper->name, &vaf);
+
+ va_end(args);
}
EXPORT_SYMBOL_GPL(nf_ct_helper_log);
{
int ret;
+ ret = register_pernet_subsys(&dccp_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&dccp_proto4);
if (ret < 0)
goto out_dccp4;
if (ret < 0)
goto out_dccp6;
- ret = register_pernet_subsys(&dccp_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&dccp_proto6);
out_dccp6:
nf_ct_l4proto_unregister(&dccp_proto4);
out_dccp4:
+ unregister_pernet_subsys(&dccp_net_ops);
+out_pernet:
return ret;
}
{
int ret;
- ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_gre4);
- if (ret < 0)
- goto out_gre4;
-
ret = register_pernet_subsys(&proto_gre_net_ops);
if (ret < 0)
goto out_pernet;
+ ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_gre4);
+ if (ret < 0)
+ goto out_gre4;
+
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_gre4);
out_gre4:
+ unregister_pernet_subsys(&proto_gre_net_ops);
+out_pernet:
return ret;
}
{
int ret;
+ ret = register_pernet_subsys(&sctp_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_sctp4);
if (ret < 0)
goto out_sctp4;
if (ret < 0)
goto out_sctp6;
- ret = register_pernet_subsys(&sctp_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp6);
out_sctp6:
nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp4);
out_sctp4:
+ unregister_pernet_subsys(&sctp_net_ops);
+out_pernet:
return ret;
}
{
int ret;
+ ret = register_pernet_subsys(&udplite_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_udplite4);
if (ret < 0)
goto out_udplite4;
if (ret < 0)
goto out_udplite6;
- ret = register_pernet_subsys(&udplite_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite6);
out_udplite6:
nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite4);
out_udplite4:
+ unregister_pernet_subsys(&udplite_net_ops);
+out_pernet:
return ret;
}
}
EXPORT_SYMBOL_GPL(nfnl_unlock);
-static struct mutex *nfnl_get_lock(__u8 subsys_id)
-{
- return &table[subsys_id].mutex;
-}
-
int nfnetlink_subsys_register(const struct nfnetlink_subsystem *n)
{
nfnl_lock(n->subsys_id);
rcu_read_unlock();
nfnl_lock(subsys_id);
if (rcu_dereference_protected(table[subsys_id].subsys,
- lockdep_is_held(nfnl_get_lock(subsys_id))) != ss ||
+ lockdep_is_held(&table[subsys_id].mutex)) != ss ||
nfnetlink_find_client(type, ss) != nc)
err = -EAGAIN;
else if (nc->call)
inst->queue_num = queue_num;
inst->peer_portid = portid;
inst->queue_maxlen = NFQNL_QMAX_DEFAULT;
- inst->copy_range = 0xfffff;
+ inst->copy_range = 0xffff;
inst->copy_mode = NFQNL_COPY_NONE;
spin_lock_init(&inst->lock);
INIT_LIST_HEAD(&inst->queue_list);
const struct xt_audit_info *info = par->targinfo;
struct audit_buffer *ab;
+ if (audit_enabled == 0)
+ goto errout;
+
ab = audit_log_start(NULL, GFP_ATOMIC, AUDIT_NETFILTER_PKT);
if (ab == NULL)
goto errout;
struct netlbl_unlhsh_walk_arg cb_arg;
u32 skip_bkt = cb->args[0];
u32 skip_chain = cb->args[1];
- u32 skip_addr4 = cb->args[2];
- u32 skip_addr6 = cb->args[3];
u32 iter_bkt;
u32 iter_chain = 0, iter_addr4 = 0, iter_addr6 = 0;
struct netlbl_unlhsh_iface *iface;
continue;
netlbl_af4list_foreach_rcu(addr4,
&iface->addr4_list) {
- if (iter_addr4++ < skip_addr4)
+ if (iter_addr4++ < cb->args[2])
continue;
if (netlbl_unlabel_staticlist_gen(
NLBL_UNLABEL_C_STATICLIST,
#if IS_ENABLED(CONFIG_IPV6)
netlbl_af6list_foreach_rcu(addr6,
&iface->addr6_list) {
- if (iter_addr6++ < skip_addr6)
+ if (iter_addr6++ < cb->args[3])
continue;
if (netlbl_unlabel_staticlist_gen(
NLBL_UNLABEL_C_STATICLIST,
unlabel_staticlist_return:
rcu_read_unlock();
- cb->args[0] = skip_bkt;
- cb->args[1] = skip_chain;
- cb->args[2] = skip_addr4;
- cb->args[3] = skip_addr6;
+ cb->args[0] = iter_bkt;
+ cb->args[1] = iter_chain;
+ cb->args[2] = iter_addr4;
+ cb->args[3] = iter_addr6;
return skb->len;
}
{
struct netlbl_unlhsh_walk_arg cb_arg;
struct netlbl_unlhsh_iface *iface;
- u32 skip_addr4 = cb->args[0];
- u32 skip_addr6 = cb->args[1];
- u32 iter_addr4 = 0;
+ u32 iter_addr4 = 0, iter_addr6 = 0;
struct netlbl_af4list *addr4;
#if IS_ENABLED(CONFIG_IPV6)
- u32 iter_addr6 = 0;
struct netlbl_af6list *addr6;
#endif
goto unlabel_staticlistdef_return;
netlbl_af4list_foreach_rcu(addr4, &iface->addr4_list) {
- if (iter_addr4++ < skip_addr4)
+ if (iter_addr4++ < cb->args[0])
continue;
if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
iface,
}
#if IS_ENABLED(CONFIG_IPV6)
netlbl_af6list_foreach_rcu(addr6, &iface->addr6_list) {
- if (iter_addr6++ < skip_addr6)
+ if (iter_addr6++ < cb->args[1])
continue;
if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
iface,
unlabel_staticlistdef_return:
rcu_read_unlock();
- cb->args[0] = skip_addr4;
- cb->args[1] = skip_addr6;
+ cb->args[0] = iter_addr4;
+ cb->args[1] = iter_addr6;
return skb->len;
}
int err = 0;
BUG_ON(grp->name[0] == '\0');
+ BUG_ON(memchr(grp->name, '\0', GENL_NAMSIZ) == NULL);
genl_lock();
}
}
-static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen)
+static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen,
+ int err)
{
struct sock *sk;
struct hlist_node *tmp;
nfc_llcp_accept_unlink(accept_sk);
+ if (err)
+ accept_sk->sk_err = err;
accept_sk->sk_state = LLCP_CLOSED;
+ accept_sk->sk_state_change(sk);
bh_unlock_sock(accept_sk);
continue;
}
+ if (err)
+ sk->sk_err = err;
sk->sk_state = LLCP_CLOSED;
+ sk->sk_state_change(sk);
bh_unlock_sock(sk);
}
write_unlock(&local->sockets.lock);
+
+ /*
+ * If we want to keep the listening sockets alive,
+ * we don't touch the RAW ones.
+ */
+ if (listen == true)
+ return;
+
+ write_lock(&local->raw_sockets.lock);
+
+ sk_for_each_safe(sk, tmp, &local->raw_sockets.head) {
+ llcp_sock = nfc_llcp_sock(sk);
+
+ bh_lock_sock(sk);
+
+ nfc_llcp_socket_purge(llcp_sock);
+
+ if (err)
+ sk->sk_err = err;
+ sk->sk_state = LLCP_CLOSED;
+ sk->sk_state_change(sk);
+
+ bh_unlock_sock(sk);
+
+ sock_orphan(sk);
+
+ sk_del_node_init(sk);
+ }
+
+ write_unlock(&local->raw_sockets.lock);
}
struct nfc_llcp_local *nfc_llcp_local_get(struct nfc_llcp_local *local)
return local;
}
-static void local_release(struct kref *ref)
+static void local_cleanup(struct nfc_llcp_local *local, bool listen)
{
- struct nfc_llcp_local *local;
-
- local = container_of(ref, struct nfc_llcp_local, ref);
-
- list_del(&local->list);
- nfc_llcp_socket_release(local, false);
+ nfc_llcp_socket_release(local, listen, ENXIO);
del_timer_sync(&local->link_timer);
skb_queue_purge(&local->tx_queue);
cancel_work_sync(&local->tx_work);
cancel_work_sync(&local->rx_work);
cancel_work_sync(&local->timeout_work);
kfree_skb(local->rx_pending);
+}
+
+static void local_release(struct kref *ref)
+{
+ struct nfc_llcp_local *local;
+
+ local = container_of(ref, struct nfc_llcp_local, ref);
+
+ list_del(&local->list);
+ local_cleanup(local, false);
kfree(local);
}
return;
/* Close and purge all existing sockets */
- nfc_llcp_socket_release(local, true);
+ nfc_llcp_socket_release(local, true, 0);
}
void nfc_llcp_mac_is_up(struct nfc_dev *dev, u32 target_idx,
return;
}
+ local_cleanup(local, false);
+
nfc_llcp_local_put(local);
}
pr_debug("Returning sk state %d\n", sk->sk_state);
+ sk_acceptq_removed(parent);
+
return sk;
}
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->csum = csum_sub(skb->csum, csum_partial(skb->data
- + ETH_HLEN, VLAN_HLEN, 0));
+ + (2 * ETH_ALEN), VLAN_HLEN, 0));
vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
*current_tci = vhdr->h_vlan_TCI;
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->csum = csum_add(skb->csum, csum_partial(skb->data
- + ETH_HLEN, VLAN_HLEN, 0));
+ + (2 * ETH_ALEN), VLAN_HLEN, 0));
}
__vlan_hwaccel_put_tag(skb, ntohs(vlan->vlan_tci) & ~VLAN_TAG_PRESENT);
skb_copy_and_csum_dev(skb, nla_data(nla));
+ genlmsg_end(user_skb, upcall);
err = genlmsg_unicast(net, user_skb, upcall_info->portid);
out:
if (IS_ERR(vport))
goto exit_unlock;
+ err = 0;
reply = ovs_vport_cmd_build_info(vport, info->snd_portid, info->snd_seq,
OVS_VPORT_CMD_NEW);
if (IS_ERR(reply)) {
if (IS_ERR(reply))
goto exit_unlock;
+ err = 0;
ovs_dp_detach_port(vport);
genl_notify(reply, genl_info_net(info), info->snd_portid,
return htons(ETH_P_802_2);
__skb_pull(skb, sizeof(struct llc_snap_hdr));
- return llc->ethertype;
+
+ if (ntohs(llc->ethertype) >= 1536)
+ return llc->ethertype;
+
+ return htons(ETH_P_802_2);
}
static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key,
/* Make our own copy of the packet. Otherwise we will mangle the
* packet for anyone who came before us (e.g. tcpdump via AF_PACKET).
- * (No one comes after us, since we tell handle_bridge() that we took
- * the packet.) */
+ */
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
return;
* @skb: skb that was received
*
* Must be called with rcu_read_lock. The packet cannot be shared and
- * skb->data should point to the Ethernet header. The caller must have already
- * called compute_ip_summed() to initialize the checksumming fields.
+ * skb->data should point to the Ethernet header.
*/
void ovs_vport_receive(struct vport *vport, struct sk_buff *skb)
{
for (i = 0; i < nr; i++) {
BUG_ON(strlen(names[i]) >= sizeof(ctr.name));
strncpy(ctr.name, names[i], sizeof(ctr.name) - 1);
+ ctr.name[sizeof(ctr.name) - 1] = '\0';
ctr.value = values[i];
rds_info_copy(iter, &ctr, sizeof(ctr));
new_num_classes == q->max_agg_classes - 1) /* agg no more full */
hlist_add_head(&agg->nonfull_next, &q->nonfull_aggs);
+ /* The next assignment may let
+ * agg->initial_budget > agg->budgetmax
+ * hold, we will take it into account in charge_actual_service().
+ */
agg->budgetmax = new_num_classes * agg->lmax;
new_agg_weight = agg->class_weight * new_num_classes;
agg->inv_w = ONE_FP/new_agg_weight;
unsigned long old_vslot = q->oldV >> q->min_slot_shift;
if (vslot != old_vslot) {
- unsigned long mask = (1UL << fls(vslot ^ old_vslot)) - 1;
+ unsigned long mask = (1ULL << fls(vslot ^ old_vslot)) - 1;
qfq_move_groups(q, mask, IR, ER);
qfq_move_groups(q, mask, IB, EB);
}
/* Update F according to the actual service received by the aggregate. */
static inline void charge_actual_service(struct qfq_aggregate *agg)
{
- /* compute the service received by the aggregate */
- u32 service_received = agg->initial_budget - agg->budget;
+ /* Compute the service received by the aggregate, taking into
+ * account that, after decreasing the number of classes in
+ * agg, it may happen that
+ * agg->initial_budget - agg->budget > agg->bugdetmax
+ */
+ u32 service_received = min(agg->budgetmax,
+ agg->initial_budget - agg->budget);
agg->F = agg->S + (u64)service_received * agg->inv_w;
}
+static inline void qfq_update_agg_ts(struct qfq_sched *q,
+ struct qfq_aggregate *agg,
+ enum update_reason reason);
+
+static void qfq_schedule_agg(struct qfq_sched *q, struct qfq_aggregate *agg);
+
static struct sk_buff *qfq_dequeue(struct Qdisc *sch)
{
struct qfq_sched *q = qdisc_priv(sch);
in_serv_agg->initial_budget = in_serv_agg->budget =
in_serv_agg->budgetmax;
- if (!list_empty(&in_serv_agg->active))
+ if (!list_empty(&in_serv_agg->active)) {
/*
* Still active: reschedule for
* service. Possible optimization: if no other
* handle it, we would need to maintain an
* extra num_active_aggs field.
*/
- qfq_activate_agg(q, in_serv_agg, requeue);
- else if (sch->q.qlen == 0) { /* no aggregate to serve */
+ qfq_update_agg_ts(q, in_serv_agg, requeue);
+ qfq_schedule_agg(q, in_serv_agg);
+ } else if (sch->q.qlen == 0) { /* no aggregate to serve */
q->in_serv_agg = NULL;
return NULL;
}
qdisc_bstats_update(sch, skb);
agg_dequeue(in_serv_agg, cl, len);
- in_serv_agg->budget -= len;
+ /* If lmax is lowered, through qfq_change_class, for a class
+ * owning pending packets with larger size than the new value
+ * of lmax, then the following condition may hold.
+ */
+ if (unlikely(in_serv_agg->budget < len))
+ in_serv_agg->budget = 0;
+ else
+ in_serv_agg->budget -= len;
+
q->V += (u64)len * IWSUM;
pr_debug("qfq dequeue: len %u F %lld now %lld\n",
len, (unsigned long long) in_serv_agg->F,
cl->deficit = agg->lmax;
list_add_tail(&cl->alist, &agg->active);
- if (list_first_entry(&agg->active, struct qfq_class, alist) != cl)
- return err; /* aggregate was not empty, nothing else to do */
+ if (list_first_entry(&agg->active, struct qfq_class, alist) != cl ||
+ q->in_serv_agg == agg)
+ return err; /* non-empty or in service, nothing else to do */
- /* recharge budget */
- agg->initial_budget = agg->budget = agg->budgetmax;
-
- qfq_update_agg_ts(q, agg, enqueue);
- if (q->in_serv_agg == NULL)
- q->in_serv_agg = agg;
- else if (agg != q->in_serv_agg)
- qfq_schedule_agg(q, agg);
+ qfq_activate_agg(q, agg, enqueue);
return err;
}
/* group was surely ineligible, remove */
__clear_bit(grp->index, &q->bitmaps[IR]);
__clear_bit(grp->index, &q->bitmaps[IB]);
- } else if (!q->bitmaps[ER] && qfq_gt(roundedS, q->V))
+ } else if (!q->bitmaps[ER] && qfq_gt(roundedS, q->V) &&
+ q->in_serv_agg == NULL)
q->V = roundedS;
grp->S = roundedS;
static void qfq_activate_agg(struct qfq_sched *q, struct qfq_aggregate *agg,
enum update_reason reason)
{
+ agg->initial_budget = agg->budget = agg->budgetmax; /* recharge budg. */
+
qfq_update_agg_ts(q, agg, reason);
- qfq_schedule_agg(q, agg);
+ if (q->in_serv_agg == NULL) { /* no aggr. in service or scheduled */
+ q->in_serv_agg = agg; /* start serving this aggregate */
+ /* update V: to be in service, agg must be eligible */
+ q->oldV = q->V = agg->S;
+ } else if (agg != q->in_serv_agg)
+ qfq_schedule_agg(q, agg);
}
static void qfq_slot_remove(struct qfq_sched *q, struct qfq_group *grp,
__set_bit(grp->index, &q->bitmaps[s]);
}
}
-
- qfq_update_eligible(q);
}
static void qfq_qlen_notify(struct Qdisc *sch, unsigned long arg)
transports) {
if (transport == active)
- break;
+ continue;
list_for_each_entry(chunk, &transport->transmitted,
transmitted_list) {
if (key == chunk->subh.data_hdr->tsn) {
}
/* Delete the tempory new association. */
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
/* Restore association pointer to provide SCTP command interpeter
else {
int N, i;
+ /*
+ * NOTE: we skip uid_valid()/gid_valid() checks here:
+ * instead, * -1 id's are later mapped to the
+ * (export-specific) anonymous id by nfsd_setuser.
+ *
+ * (But supplementary gid's get no such special
+ * treatment so are checked for validity here.)
+ */
/* uid */
rsci.cred.cr_uid = make_kuid(&init_user_ns, id);
- if (!uid_valid(rsci.cred.cr_uid))
- goto out;
/* gid */
if (get_int(&mesg, &id))
goto out;
rsci.cred.cr_gid = make_kgid(&init_user_ns, id);
- if (!gid_valid(rsci.cred.cr_gid))
- goto out;
/* number of additional gid's */
if (get_int(&mesg, &N))
.kill_sb = rpc_kill_sb,
};
MODULE_ALIAS_FS("rpc_pipefs");
+MODULE_ALIAS("rpc_pipefs");
static void
init_once(void *foo)
list_add_tail(&task->u.tk_wait.list, &queue->tasks[0]);
task->tk_waitqueue = queue;
queue->qlen++;
+ /* barrier matches the read in rpc_wake_up_task_queue_locked() */
+ smp_wmb();
rpc_set_queued(task);
dprintk("RPC: %5u added to queue %p \"%s\"\n",
*/
static void rpc_wake_up_task_queue_locked(struct rpc_wait_queue *queue, struct rpc_task *task)
{
- if (RPC_IS_QUEUED(task) && task->tk_waitqueue == queue)
- __rpc_do_wake_up_task(queue, task);
+ if (RPC_IS_QUEUED(task)) {
+ smp_rmb();
+ if (task->tk_waitqueue == queue)
+ __rpc_do_wake_up_task(queue, task);
+ }
}
/*
xs_tcp_shutdown(xprt);
}
+static void xs_local_destroy(struct rpc_xprt *xprt)
+{
+ xs_close(xprt);
+ xs_free_peer_addresses(xprt);
+ xprt_free(xprt);
+ module_put(THIS_MODULE);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
cancel_delayed_work_sync(&transport->connect_worker);
- xs_close(xprt);
- xs_free_peer_addresses(xprt);
- xprt_free(xprt);
- module_put(THIS_MODULE);
+ xs_local_destroy(xprt);
}
static inline struct rpc_xprt *xprt_from_sock(struct sock *sk)
.send_request = xs_local_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
.close = xs_close,
- .destroy = xs_destroy,
+ .destroy = xs_local_destroy,
.print_stats = xs_local_print_stats,
};
#endif
}
-static int unix_release_sock(struct sock *sk, int embrion)
+static void unix_release_sock(struct sock *sk, int embrion)
{
struct unix_sock *u = unix_sk(sk);
struct path path;
if (unix_tot_inflight)
unix_gc(); /* Garbage collect fds */
-
- return 0;
}
static void init_peercred(struct sock *sk)
if (!sk)
return 0;
+ unix_release_sock(sk, 0);
sock->sk = NULL;
- return unix_release_sock(sk, 0);
+ return 0;
}
static int unix_autobind(struct socket *sock)
if (UNIXCB(skb).cred)
return;
if (test_bit(SOCK_PASSCRED, &sock->flags) ||
- !other->sk_socket ||
- test_bit(SOCK_PASSCRED, &other->sk_socket->flags)) {
+ (other->sk_socket &&
+ test_bit(SOCK_PASSCRED, &other->sk_socket->flags))) {
UNIXCB(skb).pid = get_pid(task_tgid(current));
UNIXCB(skb).cred = get_current_cred();
}
rdev->wiphy.rts_threshold = (u32) -1;
rdev->wiphy.coverage_class = 0;
- rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH |
- NL80211_FEATURE_ADVERTISE_CHAN_LIMITS;
+ rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
return &rdev->wiphy;
}
if ((chan->flags & IEEE80211_CHAN_RADAR) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
- goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS))
- goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ))
- goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
- goto nla_put_failure;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
DBM_TO_MBM(chan->max_power)))
dev->wiphy.max_acl_mac_addrs))
goto nla_put_failure;
- if (dev->wiphy.extended_capabilities &&
- (nla_put(msg, NL80211_ATTR_EXT_CAPA,
- dev->wiphy.extended_capabilities_len,
- dev->wiphy.extended_capabilities) ||
- nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
- dev->wiphy.extended_capabilities_len,
- dev->wiphy.extended_capabilities_mask)))
- goto nla_put_failure;
-
return genlmsg_end(msg, hdr);
nla_put_failure:
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
{
- int idx = 0;
+ int idx = 0, ret;
int start = cb->args[0];
struct cfg80211_registered_device *dev;
continue;
if (++idx <= start)
continue;
- if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
- cb->nlh->nlmsg_seq, NLM_F_MULTI,
- dev) < 0) {
+ ret = nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
+ cb->nlh->nlmsg_seq, NLM_F_MULTI,
+ dev);
+ if (ret < 0) {
+ /*
+ * If sending the wiphy data didn't fit (ENOBUFS or
+ * EMSGSIZE returned), this SKB is still empty (so
+ * it's not too big because another wiphy dataset is
+ * already in the skb) and we've not tried to adjust
+ * the dump allocation yet ... then adjust the alloc
+ * size to be bigger, and return 1 but with the empty
+ * skb. This results in an empty message being RX'ed
+ * in userspace, but that is ignored.
+ *
+ * We can then retry with the larger buffer.
+ */
+ if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
+ !skb->len &&
+ cb->min_dump_alloc < 4096) {
+ cb->min_dump_alloc = 4096;
+ mutex_unlock(&cfg80211_mutex);
+ return 1;
+ }
idx--;
break;
}
struct sk_buff *msg;
struct cfg80211_registered_device *dev = info->user_ptr[0];
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ msg = nlmsg_new(4096, GFP_KERNEL);
if (!msg)
return -ENOMEM;
include $(kbuild-file)
# called may set destination dir (when installing to asm/)
-_dst := $(or $(destination-y),$(dst),$(obj))
+_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
output-files := $(addprefix $(installdir)/, $(all-files))
input-files := $(foreach hdr, $(header-y), \
- $(or \
+ $(if $(wildcard $(srcdir)/$(hdr)), \
$(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ $(if $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(error Missing UAPI file $(srcdir)/$(hdr))) \
)) \
$(foreach hdr, $(genhdr-y), \
- $(or \
+ $(if $(wildcard $(gendir)/$(hdr)), \
$(wildcard $(gendir)/$(hdr)), \
$(error Missing generated UAPI file $(gendir)/$(hdr)) \
))
ARRAY_SIZE(iovstack),
iovstack, &iov);
if (ret < 0)
- return ret;
+ goto err;
if (ret == 0)
goto no_payload_free;
ret = keyctl_instantiate_key_common(id, iov, ioc, ret, ringid);
-
+err:
if (iov != iovstack)
kfree(iov);
return ret;
kenter("%p{%u}", user, uid);
- if (user->uid_keyring) {
+ if (user->uid_keyring && user->session_keyring) {
kleave(" = 0 [exist]");
return 0;
}
if (old_ctx) {
new_ctx = kmalloc(sizeof(*old_ctx) + old_ctx->ctx_len,
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!new_ctx)
return -ENOMEM;
/* Only disallow PTRACE_TRACEME on more aggressive settings. */
switch (ptrace_scope) {
case YAMA_SCOPE_CAPABILITY:
- rcu_read_lock();
- if (!ns_capable(__task_cred(parent)->user_ns, CAP_SYS_PTRACE))
+ if (!has_ns_capability(parent, current_user_ns(), CAP_SYS_PTRACE))
rc = -EPERM;
- rcu_read_unlock();
break;
case YAMA_SCOPE_NO_ATTACH:
rc = -EPERM;
tid.device = SNDRV_TIMER_GLOBAL_SYSTEM;
err = snd_timer_open(&t, str, &tid, q->queue);
}
- if (err < 0) {
- snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
- return err;
- }
+ }
+ if (err < 0) {
+ snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
+ return err;
}
t->callback = snd_seq_timer_interrupt;
t->callback_data = q;
case MIDI_PGM_CHANGE:
if (seq_mode == SEQ_2)
{
+ if (chn > 15)
+ break;
+
synth_devs[dev]->chn_info[chn].pgm_num = p1;
if ((int) dev >= num_synths)
synth_devs[dev]->set_instr(dev, chn, p1);
case MIDI_PITCH_BEND:
if (seq_mode == SEQ_2)
{
+ if (chn > 15)
+ break;
+
synth_devs[dev]->chn_info[chn].bender_value = w14;
if ((int) dev < num_synths)
static int snd_card_asihpi_mixer_new(struct snd_card_asihpi *asihpi)
{
- struct snd_card *card = asihpi->card;
+ struct snd_card *card;
unsigned int idx = 0;
unsigned int subindex = 0;
int err;
if (snd_BUG_ON(!asihpi))
return -EINVAL;
+ card = asihpi->card;
strcpy(card->mixername, "Asihpi Mixer");
err =
int snd_hda_get_num_raw_conns(struct hda_codec *codec, hda_nid_t nid)
{
- return get_num_conns(codec, nid) & AC_CLIST_LENGTH;
+ return snd_hda_get_raw_connections(codec, nid, NULL, 0);
}
/**
hda_nid_t prev_nid;
int null_count = 0;
- if (snd_BUG_ON(!conn_list || max_conns <= 0))
- return -EINVAL;
-
parm = get_num_conns(codec, nid);
if (!parm)
return 0;
AC_VERB_GET_CONNECT_LIST, 0);
if (parm == -1 && codec->bus->rirb_error)
return -EIO;
- conn_list[0] = parm & mask;
+ if (conn_list)
+ conn_list[0] = parm & mask;
return 1;
}
continue;
}
for (n = prev_nid + 1; n <= val; n++) {
+ if (conn_list) {
+ if (conns >= max_conns)
+ return -ENOSPC;
+ conn_list[conns] = n;
+ }
+ conns++;
+ }
+ } else {
+ if (conn_list) {
if (conns >= max_conns)
return -ENOSPC;
- conn_list[conns++] = n;
+ conn_list[conns] = val;
}
- } else {
- if (conns >= max_conns)
- return -ENOSPC;
- conn_list[conns++] = val;
+ conns++;
}
prev_nid = val;
}
if (val & AC_DIG1_PROFESSIONAL)
sbits |= IEC958_AES0_PROFESSIONAL;
if (sbits & IEC958_AES0_PROFESSIONAL) {
- if (sbits & AC_DIG1_EMPHASIS)
+ if (val & AC_DIG1_EMPHASIS)
sbits |= IEC958_AES0_PRO_EMPHASIS_5015;
} else {
if (val & AC_DIG1_EMPHASIS)
BAD_NO_EXTRA_SURR_DAC = 0x101,
/* Primary DAC shared with main surrounds */
BAD_SHARED_SURROUND = 0x100,
+ /* No independent HP possible */
+ BAD_NO_INDEP_HP = 0x40,
/* Primary DAC shared with main CLFE */
BAD_SHARED_CLFE = 0x10,
/* Primary DAC shared with extra surrounds */
return snd_hda_get_path_idx(codec, path);
}
+/* check whether the independent HP is available with the current config */
+static bool indep_hp_possible(struct hda_codec *codec)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ struct nid_path *path;
+ int i, idx;
+
+ if (cfg->line_out_type == AUTO_PIN_HP_OUT)
+ idx = spec->out_paths[0];
+ else
+ idx = spec->hp_paths[0];
+ path = snd_hda_get_path_from_idx(codec, idx);
+ if (!path)
+ return false;
+
+ /* assume no path conflicts unless aamix is involved */
+ if (!spec->mixer_nid || !is_nid_contained(path, spec->mixer_nid))
+ return true;
+
+ /* check whether output paths contain aamix */
+ for (i = 0; i < cfg->line_outs; i++) {
+ if (spec->out_paths[i] == idx)
+ break;
+ path = snd_hda_get_path_from_idx(codec, spec->out_paths[i]);
+ if (path && is_nid_contained(path, spec->mixer_nid))
+ return false;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ path = snd_hda_get_path_from_idx(codec, spec->speaker_paths[i]);
+ if (path && is_nid_contained(path, spec->mixer_nid))
+ return false;
+ }
+
+ return true;
+}
+
/* fill the empty entries in the dac array for speaker/hp with the
* shared dac pointed by the paths
*/
badness += BAD_MULTI_IO;
}
+ if (spec->indep_hp && !indep_hp_possible(codec))
+ badness += BAD_NO_INDEP_HP;
+
/* re-fill the shared DAC for speaker / headphone */
if (cfg->line_out_type != AUTO_PIN_HP_OUT)
refill_shared_dacs(codec, cfg->hp_outs,
cfg->speaker_pins, val);
}
+ /* clear indep_hp flag if not available */
+ if (spec->indep_hp && !indep_hp_possible(codec))
+ spec->indep_hp = 0;
+
kfree(best_cfg);
return 0;
}
unsigned int opened :1;
unsigned int running :1;
unsigned int irq_pending :1;
+ unsigned int prepared:1;
+ unsigned int locked:1;
/*
* For VIA:
* A flag to ensure DMA position is 0
struct timecounter azx_tc;
struct cyclecounter azx_cc;
+
+#ifdef CONFIG_SND_HDA_DSP_LOADER
+ struct mutex dsp_mutex;
+#endif
};
+/* DSP lock helpers */
+#ifdef CONFIG_SND_HDA_DSP_LOADER
+#define dsp_lock_init(dev) mutex_init(&(dev)->dsp_mutex)
+#define dsp_lock(dev) mutex_lock(&(dev)->dsp_mutex)
+#define dsp_unlock(dev) mutex_unlock(&(dev)->dsp_mutex)
+#define dsp_is_locked(dev) ((dev)->locked)
+#else
+#define dsp_lock_init(dev) do {} while (0)
+#define dsp_lock(dev) do {} while (0)
+#define dsp_unlock(dev) do {} while (0)
+#define dsp_is_locked(dev) 0
+#endif
+
/* CORB/RIRB */
struct azx_rb {
u32 *buf; /* CORB/RIRB buffer
/* card list (for power_save trigger) */
struct list_head list;
+
+#ifdef CONFIG_SND_HDA_DSP_LOADER
+ struct azx_dev saved_azx_dev;
+#endif
};
#define CREATE_TRACE_POINTS
dev = chip->capture_index_offset;
nums = chip->capture_streams;
}
- for (i = 0; i < nums; i++, dev++)
- if (!chip->azx_dev[dev].opened) {
- res = &chip->azx_dev[dev];
- if (res->assigned_key == key)
- break;
+ for (i = 0; i < nums; i++, dev++) {
+ struct azx_dev *azx_dev = &chip->azx_dev[dev];
+ dsp_lock(azx_dev);
+ if (!azx_dev->opened && !dsp_is_locked(azx_dev)) {
+ res = azx_dev;
+ if (res->assigned_key == key) {
+ res->opened = 1;
+ res->assigned_key = key;
+ dsp_unlock(azx_dev);
+ return azx_dev;
+ }
}
+ dsp_unlock(azx_dev);
+ }
if (res) {
+ dsp_lock(res);
res->opened = 1;
res->assigned_key = key;
+ dsp_unlock(res);
}
return res;
}
struct azx_dev *azx_dev = get_azx_dev(substream);
int ret;
+ dsp_lock(azx_dev);
+ if (dsp_is_locked(azx_dev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
mark_runtime_wc(chip, azx_dev, substream, false);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
if (ret < 0)
- return ret;
+ goto unlock;
mark_runtime_wc(chip, azx_dev, substream, true);
+ unlock:
+ dsp_unlock(azx_dev);
return ret;
}
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
/* reset BDL address */
- azx_sd_writel(azx_dev, SD_BDLPL, 0);
- azx_sd_writel(azx_dev, SD_BDLPU, 0);
- azx_sd_writel(azx_dev, SD_CTL, 0);
- azx_dev->bufsize = 0;
- azx_dev->period_bytes = 0;
- azx_dev->format_val = 0;
+ dsp_lock(azx_dev);
+ if (!dsp_is_locked(azx_dev)) {
+ azx_sd_writel(azx_dev, SD_BDLPL, 0);
+ azx_sd_writel(azx_dev, SD_BDLPU, 0);
+ azx_sd_writel(azx_dev, SD_CTL, 0);
+ azx_dev->bufsize = 0;
+ azx_dev->period_bytes = 0;
+ azx_dev->format_val = 0;
+ }
snd_hda_codec_cleanup(apcm->codec, hinfo, substream);
mark_runtime_wc(chip, azx_dev, substream, false);
+ azx_dev->prepared = 0;
+ dsp_unlock(azx_dev);
return snd_pcm_lib_free_pages(substream);
}
snd_hda_spdif_out_of_nid(apcm->codec, hinfo->nid);
unsigned short ctls = spdif ? spdif->ctls : 0;
+ dsp_lock(azx_dev);
+ if (dsp_is_locked(azx_dev)) {
+ err = -EBUSY;
+ goto unlock;
+ }
+
azx_stream_reset(chip, azx_dev);
format_val = snd_hda_calc_stream_format(runtime->rate,
runtime->channels,
snd_printk(KERN_ERR SFX
"%s: invalid format_val, rate=%d, ch=%d, format=%d\n",
pci_name(chip->pci), runtime->rate, runtime->channels, runtime->format);
- return -EINVAL;
+ err = -EINVAL;
+ goto unlock;
}
bufsize = snd_pcm_lib_buffer_bytes(substream);
azx_dev->no_period_wakeup = runtime->no_period_wakeup;
err = azx_setup_periods(chip, substream, azx_dev);
if (err < 0)
- return err;
+ goto unlock;
}
/* wallclk has 24Mhz clock source */
if ((chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND) &&
stream_tag > chip->capture_streams)
stream_tag -= chip->capture_streams;
- return snd_hda_codec_prepare(apcm->codec, hinfo, stream_tag,
+ err = snd_hda_codec_prepare(apcm->codec, hinfo, stream_tag,
azx_dev->format_val, substream);
+
+ unlock:
+ if (!err)
+ azx_dev->prepared = 1;
+ dsp_unlock(azx_dev);
+ return err;
}
static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
azx_dev = get_azx_dev(substream);
trace_azx_pcm_trigger(chip, azx_dev, cmd);
+ if (dsp_is_locked(azx_dev) || !azx_dev->prepared)
+ return -EPIPE;
+
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
rstart = 1;
struct azx_dev *azx_dev;
int err;
- if (snd_hda_lock_devices(bus))
- return -EBUSY;
+ azx_dev = azx_get_dsp_loader_dev(chip);
+
+ dsp_lock(azx_dev);
+ spin_lock_irq(&chip->reg_lock);
+ if (azx_dev->running || azx_dev->locked) {
+ spin_unlock_irq(&chip->reg_lock);
+ err = -EBUSY;
+ goto unlock;
+ }
+ azx_dev->prepared = 0;
+ chip->saved_azx_dev = *azx_dev;
+ azx_dev->locked = 1;
+ spin_unlock_irq(&chip->reg_lock);
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(chip->pci),
byte_size, bufp);
if (err < 0)
- goto unlock;
+ goto err_alloc;
mark_pages_wc(chip, bufp, true);
- azx_dev = azx_get_dsp_loader_dev(chip);
azx_dev->bufsize = byte_size;
azx_dev->period_bytes = byte_size;
azx_dev->format_val = format;
goto error;
azx_setup_controller(chip, azx_dev);
+ dsp_unlock(azx_dev);
return azx_dev->stream_tag;
error:
mark_pages_wc(chip, bufp, false);
snd_dma_free_pages(bufp);
-unlock:
- snd_hda_unlock_devices(bus);
+ err_alloc:
+ spin_lock_irq(&chip->reg_lock);
+ if (azx_dev->opened)
+ *azx_dev = chip->saved_azx_dev;
+ azx_dev->locked = 0;
+ spin_unlock_irq(&chip->reg_lock);
+ unlock:
+ dsp_unlock(azx_dev);
return err;
}
struct azx *chip = bus->private_data;
struct azx_dev *azx_dev = azx_get_dsp_loader_dev(chip);
- if (!dmab->area)
+ if (!dmab->area || !azx_dev->locked)
return;
+ dsp_lock(azx_dev);
/* reset BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
snd_dma_free_pages(dmab);
dmab->area = NULL;
- snd_hda_unlock_devices(bus);
+ spin_lock_irq(&chip->reg_lock);
+ if (azx_dev->opened)
+ *azx_dev = chip->saved_azx_dev;
+ azx_dev->locked = 0;
+ spin_unlock_irq(&chip->reg_lock);
+ dsp_unlock(azx_dev);
}
#endif /* CONFIG_SND_HDA_DSP_LOADER */
}
for (i = 0; i < chip->num_streams; i++) {
+ dsp_lock_init(&chip->azx_dev[i]);
/* allocate memory for the BDL for each stream */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
snd_dma_pci_data(chip->pci),
struct ca0132_spec *spec = codec->spec;
unsigned int tmp;
- if (!dspload_is_loaded(codec))
+ if (spec->dsp_state != DSP_DOWNLOADED)
return 0;
/* if CrystalVoice if off, vipsource should be 0 */
*/
static void ca0132_setup_defaults(struct hda_codec *codec)
{
+ struct ca0132_spec *spec = codec->spec;
unsigned int tmp;
int num_fx;
int idx, i;
- if (!dspload_is_loaded(codec))
+ if (spec->dsp_state != DSP_DOWNLOADED)
return;
/* out, in effects + voicefx */
return false;
dsp_os_image = (struct dsp_image_seg *)(fw_entry->data);
- dspload_image(codec, dsp_os_image, 0, 0, true, 0);
+ if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) {
+ pr_err("ca0132 dspload_image failed.\n");
+ goto exit_download;
+ }
+
dsp_loaded = dspload_wait_loaded(codec);
+exit_download:
release_firmware(fw_entry);
-
return dsp_loaded;
}
#ifndef CONFIG_SND_HDA_CODEC_CA0132_DSP
return; /* NOP */
#endif
- spec->dsp_state = DSP_DOWNLOAD_INIT;
- if (spec->dsp_state == DSP_DOWNLOAD_INIT) {
- chipio_enable_clocks(codec);
- spec->dsp_state = DSP_DOWNLOADING;
- if (!ca0132_download_dsp_images(codec))
- spec->dsp_state = DSP_DOWNLOAD_FAILED;
- else
- spec->dsp_state = DSP_DOWNLOADED;
- }
+ chipio_enable_clocks(codec);
+ spec->dsp_state = DSP_DOWNLOADING;
+ if (!ca0132_download_dsp_images(codec))
+ spec->dsp_state = DSP_DOWNLOAD_FAILED;
+ else
+ spec->dsp_state = DSP_DOWNLOADED;
if (spec->dsp_state == DSP_DOWNLOADED)
ca0132_set_dsp_msr(codec, true);
snd_hda_gen_update_outputs(codec);
if (spec->gpio_eapd_hp) {
- unsigned int gpio = spec->gen.hp_jack_present ?
+ spec->gpio_data = spec->gen.hp_jack_present ?
spec->gpio_eapd_hp : spec->gpio_eapd_speaker;
snd_hda_codec_write(codec, 0x01, 0,
- AC_VERB_SET_GPIO_DATA, gpio);
+ AC_VERB_SET_GPIO_DATA, spec->gpio_data);
}
}
if (!spec)
return -ENOMEM;
+ spec->gen.automute_hook = cs_automute;
+
snd_hda_pick_fixup(codec, cs420x_models, cs420x_fixup_tbl,
cs420x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
if (!spec)
return -ENOMEM;
+ spec->gen.automute_hook = cs_automute;
+
snd_hda_pick_fixup(codec, cs421x_models, cs421x_fixup_tbl,
cs421x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
}
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
return 0;
}
}
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
return 0;
}
}
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
return 0;
}
return 0;
}
+static void cx_auto_free(struct hda_codec *codec)
+{
+ snd_hda_detach_beep_device(codec);
+ snd_hda_gen_free(codec);
+}
+
static const struct hda_codec_ops cx_auto_patch_ops = {
.build_controls = cx_auto_build_controls,
.build_pcms = snd_hda_gen_build_pcms,
.init = snd_hda_gen_init,
- .free = snd_hda_gen_free,
+ .free = cx_auto_free,
.unsol_event = snd_hda_jack_unsol_event,
#ifdef CONFIG_PM
.check_power_status = snd_hda_gen_check_power_status,
codec->patch_ops = cx_auto_patch_ops;
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
/* Some laptops with Conexant chips show stalls in S3 resume,
* which falls into the single-cmd mode.
return 0;
}
+/* check whether a built-in speaker is included in parsed pins */
+static bool has_builtin_speaker(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ hda_nid_t *nid_pin;
+ int nids, i;
+
+ if (spec->gen.autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ nid_pin = spec->gen.autocfg.line_out_pins;
+ nids = spec->gen.autocfg.line_outs;
+ } else {
+ nid_pin = spec->gen.autocfg.speaker_pins;
+ nids = spec->gen.autocfg.speaker_outs;
+ }
+
+ for (i = 0; i < nids; i++) {
+ unsigned int def_conf = snd_hda_codec_get_pincfg(codec, nid_pin[i]);
+ if (snd_hda_get_input_pin_attr(def_conf) == INPUT_PIN_ATTR_INT)
+ return true;
+ }
+ return false;
+}
+
/*
* PC beep controls
*/
return err;
}
+ /* Don't GPIO-mute speakers if there are no internal speakers, because
+ * the GPIO might be necessary for Headphone
+ */
+ if (spec->eapd_switch && !has_builtin_speaker(codec))
+ spec->eapd_switch = 0;
+
codec->proc_widget_hook = stac92hd7x_proc_hook;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/mxs.h>
#include "mxs-saif.h"
+#define MXS_SET_ADDR 0x4
+#define MXS_CLR_ADDR 0x8
+
static struct mxs_saif *mxs_saif[2];
/*
struct usb_interface_assoc_descriptor *assoc =
usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
+ if (!assoc) {
+ /*
+ * Firmware writers cannot count to three. So to find
+ * the IAD on the NuForce UDH-100, also check the next
+ * interface.
+ */
+ struct usb_interface *iface =
+ usb_ifnum_to_if(dev, ctrlif + 1);
+ if (iface &&
+ iface->intf_assoc &&
+ iface->intf_assoc->bFunctionClass == USB_CLASS_AUDIO &&
+ iface->intf_assoc->bFunctionProtocol == UAC_VERSION_2)
+ assoc = iface->intf_assoc;
+ }
+
if (!assoc) {
snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
return -EINVAL;
case UAC2_CLOCK_SELECTOR: {
struct uac_selector_unit_descriptor *d = p1;
/* call recursively to retrieve the channel info */
- if (check_input_term(state, d->baSourceID[0], term) < 0)
- return -ENODEV;
+ err = check_input_term(state, d->baSourceID[0], term);
+ if (err < 0)
+ return err;
term->type = d->bDescriptorSubtype << 16; /* virtual type */
term->id = id;
term->name = uac_selector_unit_iSelector(d);
case UAC1_PROCESSING_UNIT:
case UAC1_EXTENSION_UNIT:
/* UAC2_PROCESSING_UNIT_V2 */
- /* UAC2_EFFECT_UNIT */ {
+ /* UAC2_EFFECT_UNIT */
+ case UAC2_EXTENSION_UNIT_V2: {
struct uac_processing_unit_descriptor *d = p1;
if (state->mixer->protocol == UAC_VERSION_2 &&
return err;
/* determine the input source type and name */
- if (check_input_term(state, hdr->bSourceID, &iterm) < 0)
- return -EINVAL;
+ err = check_input_term(state, hdr->bSourceID, &iterm);
+ if (err < 0)
+ return err;
master_bits = snd_usb_combine_bytes(bmaControls, csize);
/* master configuration quirks */
return parse_audio_extension_unit(state, unitid, p1);
else /* UAC_VERSION_2 */
return parse_audio_processing_unit(state, unitid, p1);
+ case UAC2_EXTENSION_UNIT_V2:
+ return parse_audio_extension_unit(state, unitid, p1);
default:
snd_printk(KERN_ERR "usbaudio: unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
return -EINVAL;
state.oterm.type = le16_to_cpu(desc->wTerminalType);
state.oterm.name = desc->iTerminal;
err = parse_audio_unit(&state, desc->bSourceID);
- if (err < 0)
+ if (err < 0 && err != -EINVAL)
return err;
} else { /* UAC_VERSION_2 */
struct uac2_output_terminal_descriptor *desc = p;
state.oterm.type = le16_to_cpu(desc->wTerminalType);
state.oterm.name = desc->iTerminal;
err = parse_audio_unit(&state, desc->bSourceID);
- if (err < 0)
+ if (err < 0 && err != -EINVAL)
return err;
/* for UAC2, use the same approach to also add the clock selectors */
err = parse_audio_unit(&state, desc->bCSourceID);
- if (err < 0)
+ if (err < 0 && err != -EINVAL)
return err;
}
}
EVENT_PARSE_VERSION = $(EP_VERSION).$(EP_PATCHLEVEL).$(EP_EXTRAVERSION)
-INCLUDES = -I. -I/usr/local/include $(CONFIG_INCLUDES)
+INCLUDES = -I. $(CONFIG_INCLUDES)
# Set compile option CFLAGS if not set elsewhere
CFLAGS ?= -g -Wall
PERF_DEBUG = $(DEBUG)
endif
ifndef PERF_DEBUG
- CFLAGS_OPTIMIZE = -O6 -D_FORTIFY_SOURCE=2
+ CFLAGS_OPTIMIZE = -O6
endif
ifdef PARSER_DEBUG
CFLAGS := $(CFLAGS) -Wvolatile-register-var
endif
+ifndef PERF_DEBUG
+ ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -D_FORTIFY_SOURCE=2,-D_FORTIFY_SOURCE=2),y)
+ CFLAGS := $(CFLAGS) -D_FORTIFY_SOURCE=2
+ endif
+endif
+
### --- END CONFIGURATION SECTION ---
ifeq ($(srctree),)
#ifndef BENCH_H
#define BENCH_H
+/*
+ * The madvise transparent hugepage constants were added in glibc
+ * 2.13. For compatibility with older versions of glibc, define these
+ * tokens if they are not already defined.
+ *
+ * PA-RISC uses different madvise values from other architectures and
+ * needs to be special-cased.
+ */
+#ifdef __hppa__
+# ifndef MADV_HUGEPAGE
+# define MADV_HUGEPAGE 67
+# endif
+# ifndef MADV_NOHUGEPAGE
+# define MADV_NOHUGEPAGE 68
+# endif
+#else
+# ifndef MADV_HUGEPAGE
+# define MADV_HUGEPAGE 14
+# endif
+# ifndef MADV_NOHUGEPAGE
+# define MADV_NOHUGEPAGE 15
+# endif
+#endif
+
extern int bench_numa(int argc, const char **argv, const char *prefix);
extern int bench_sched_messaging(int argc, const char **argv, const char *prefix);
extern int bench_sched_pipe(int argc, const char **argv, const char *prefix);
perf_event__synthesize_guest_os, tool);
}
- if (!opts->target.system_wide)
+ if (perf_target__has_task(&opts->target))
err = perf_event__synthesize_thread_map(tool, evsel_list->threads,
process_synthesized_event,
machine);
- else
+ else if (perf_target__has_cpu(&opts->target))
err = perf_event__synthesize_threads(tool, process_synthesized_event,
machine);
+ else /* command specified */
+ err = 0;
if (err != 0)
goto out_delete_session;
return 0;
}
-#define K_LEFT -1
-#define K_RIGHT -2
+#define K_LEFT -1000
+#define K_RIGHT -2000
+#define K_SWITCH_INPUT_DATA -3000
#endif
#ifdef GTK2_SUPPORT
slist->rblist.node_delete = strlist__node_delete;
slist->dupstr = dupstr;
- if (slist && strlist__parse_list(slist, list) != 0)
+ if (list && strlist__parse_list(slist, list) != 0)
goto out_error;
}
#include <unistd.h>
#include <tools/le_byteshift.h>
-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"
/******************** Little Endian Handling ********************************/
u32 redir_index = (ioapic->ioregsel - 0x10) >> 1;
u64 redir_content;
- ASSERT(redir_index < IOAPIC_NUM_PINS);
+ if (redir_index < IOAPIC_NUM_PINS)
+ redir_content =
+ ioapic->redirtbl[redir_index].bits;
+ else
+ redir_content = ~0ULL;
- redir_content = ioapic->redirtbl[redir_index].bits;
result = (ioapic->ioregsel & 0x1) ?
(redir_content >> 32) & 0xffffffff :
redir_content & 0xffffffff;
projects / cascardo / linux.git / commitdiff