return false;
}
+static bool rtl8723bu_simularity_compare(struct rtl8xxxu_priv *priv,
+ int result[][8], int c1, int c2)
+{
+ u32 i, j, diff, simubitmap, bound = 0;
+ int candidate[2] = {-1, -1}; /* for path A and path B */
+ int tmp1, tmp2;
+ bool retval = true;
+
+ if (priv->tx_paths > 1)
+ bound = 8;
+ else
+ bound = 4;
+
+ simubitmap = 0;
+
+ for (i = 0; i < bound; i++) {
+ if (i & 1) {
+ if ((result[c1][i] & 0x00000200))
+ tmp1 = result[c1][i] | 0xfffffc00;
+ else
+ tmp1 = result[c1][i];
+
+ if ((result[c2][i]& 0x00000200))
+ tmp2 = result[c2][i] | 0xfffffc00;
+ else
+ tmp2 = result[c2][i];
+ } else {
+ tmp1 = result[c1][i];
+ tmp2 = result[c2][i];
+ }
+
+ diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1);
+
+ if (diff > MAX_TOLERANCE) {
+ if ((i == 2 || i == 6) && !simubitmap) {
+ if (result[c1][i] + result[c1][i + 1] == 0)
+ candidate[(i / 4)] = c2;
+ else if (result[c2][i] + result[c2][i + 1] == 0)
+ candidate[(i / 4)] = c1;
+ else
+ simubitmap = simubitmap | (1 << i);
+ } else {
+ simubitmap = simubitmap | (1 << i);
+ }
+ }
+ }
+
+ if (simubitmap == 0) {
+ for (i = 0; i < (bound / 4); i++) {
+ if (candidate[i] >= 0) {
+ for (j = i * 4; j < (i + 1) * 4 - 2; j++)
+ result[3][j] = result[candidate[i]][j];
+ retval = false;
+ }
+ }
+ return retval;
+ } else {
+ if (!(simubitmap & 0x03)) {
+ /* path A TX OK */
+ for (i = 0; i < 2; i++)
+ result[3][i] = result[c1][i];
+ }
+
+ if (!(simubitmap & 0x0c)) {
+ /* path A RX OK */
+ for (i = 2; i < 4; i++)
+ result[3][i] = result[c1][i];
+ }
+
+ if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
+ /* path B RX OK */
+ for (i = 4; i < 6; i++)
+ result[3][i] = result[c1][i];
+ }
+
+ if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
+ /* path B RX OK */
+ for (i = 6; i < 8; i++)
+ result[3][i] = result[c1][i];
+ }
+ }
+
+ return false;
+}
+
static void
rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup)
{
return result;
}
+static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+ u32 reg_eac, reg_e94, reg_e9c, path_sel, val32;
+ int result = 0;
+
+ path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+ /*
+ * Leave IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /*
+ * Enable path A PA in TX IQK mode
+ */
+ val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+ val32 |= 0x80000;
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87);
+
+ /*
+ * Tx IQK setting
+ */
+ rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+ rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+ /* path-A IQK setting */
+ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea);
+ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
+ rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+ rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+ /* LO calibration setting */
+ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+ /*
+ * Enter IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ val32 |= 0x80800000;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /*
+ * The vendor driver indicates the USB module is always using
+ * S0S1 path 1 for the 8723bu. This may be different for 8192eu
+ */
+ if (priv->rf_paths > 1)
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+ else
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+ /*
+ * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
+ * No trace of this in the 8192eu or 8188eu vendor drivers.
+ */
+ rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+ /* One shot, path A LOK & IQK */
+ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+ mdelay(1);
+
+ /* Restore Ant Path */
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+ /* GNT_BT = 1 */
+ rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+ /*
+ * Leave IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /* Check failed */
+ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+ reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+ reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+ val32 = (reg_e9c >> 16) & 0x3ff;
+ if (val32 & 0x200)
+ val32 = 0x400 - val32;
+
+ if (!(reg_eac & BIT(28)) &&
+ ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+ ((reg_e9c & 0x03ff0000) != 0x00420000) &&
+ ((reg_e94 & 0x03ff0000) < 0x01100000) &&
+ ((reg_e94 & 0x03ff0000) > 0x00f00000) &&
+ val32 < 0xf)
+ result |= 0x01;
+ else /* If TX not OK, ignore RX */
+ goto out;
+
+out:
+ return result;
+}
+
+static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+ u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32;
+ int result = 0;
+
+ path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+ /*
+ * Leave IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /*
+ * Enable path A PA in TX IQK mode
+ */
+ val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+ val32 |= 0x80000;
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
+
+ /*
+ * Tx IQK setting
+ */
+ rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+ rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+ /* path-A IQK setting */
+ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0);
+ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
+ rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+ rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+ /* LO calibration setting */
+ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+ /*
+ * Enter IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ val32 |= 0x80800000;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /*
+ * The vendor driver indicates the USB module is always using
+ * S0S1 path 1 for the 8723bu. This may be different for 8192eu
+ */
+ if (priv->rf_paths > 1)
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+ else
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+ /*
+ * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
+ * No trace of this in the 8192eu or 8188eu vendor drivers.
+ */
+ rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+ /* One shot, path A LOK & IQK */
+ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+ mdelay(1);
+
+ /* Restore Ant Path */
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+ /* GNT_BT = 1 */
+ rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+ /*
+ * Leave IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /* Check failed */
+ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+ reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+ reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+ val32 = (reg_e9c >> 16) & 0x3ff;
+ if (val32 & 0x200)
+ val32 = 0x400 - val32;
+
+ if (!(reg_eac & BIT(28)) &&
+ ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+ ((reg_e9c & 0x03ff0000) != 0x00420000) &&
+ ((reg_e94 & 0x03ff0000) < 0x01100000) &&
+ ((reg_e94 & 0x03ff0000) > 0x00f00000) &&
+ val32 < 0xf)
+ result |= 0x01;
+ else /* If TX not OK, ignore RX */
+ goto out;
+
+ val32 = 0x80007c00 | (reg_e94 &0x3ff0000) |
+ ((reg_e9c & 0x3ff0000) >> 16);
+ rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+ /*
+ * Modify RX IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+ val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+ val32 |= 0x80000;
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77);
+
+ /*
+ * PA, PAD setting
+ */
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f);
+
+ /*
+ * RX IQK setting
+ */
+ rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+ /* path-A IQK setting */
+ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
+ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000);
+ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f);
+ rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+ rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+ /* LO calibration setting */
+ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1);
+
+ /*
+ * Enter IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ val32 |= 0x80800000;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ if (priv->rf_paths > 1)
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+ else
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+ /*
+ * Disable BT
+ */
+ rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+ /* One shot, path A LOK & IQK */
+ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+ mdelay(1);
+
+ /* Restore Ant Path */
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+ /* GNT_BT = 1 */
+ rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+ /*
+ * Leave IQK mode
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /* Check failed */
+ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+ reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780);
+
+ val32 = (reg_eac >> 16) & 0x3ff;
+ if (val32 & 0x200)
+ val32 = 0x400 - val32;
+
+ if (!(reg_eac & BIT(27)) &&
+ ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+ ((reg_eac & 0x03ff0000) != 0x00360000) &&
+ ((reg_ea4 & 0x03ff0000) < 0x01100000) &&
+ ((reg_ea4 & 0x03ff0000) > 0x00f00000) &&
+ val32 < 0xf)
+ result |= 0x02;
+ else /* If TX not OK, ignore RX */
+ goto out;
+out:
+ return result;
+}
+
+#ifdef RTL8723BU_PATH_B
+static int rtl8723bu_iqk_path_b(struct rtl8xxxu_priv *priv)
+{
+ u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, path_sel;
+ int result = 0;
+
+ path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /* One shot, path B LOK & IQK */
+ rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
+ rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
+
+ mdelay(1);
+
+ /* Check failed */
+ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+ reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+ reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+ reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+ reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+
+ if (!(reg_eac & BIT(31)) &&
+ ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+ ((reg_ebc & 0x03ff0000) != 0x00420000))
+ result |= 0x01;
+ else
+ goto out;
+
+ if (!(reg_eac & BIT(30)) &&
+ (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
+ (((reg_ecc & 0x03ff0000) >> 16) != 0x36))
+ result |= 0x02;
+ else
+ dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
+ __func__);
+out:
+ return result;
+}
+#endif
+
static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
int result[][8], int t)
{
}
}
+static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+ int result[][8], int t)
+{
+ struct device *dev = &priv->udev->dev;
+ u32 i, val32;
+ int path_a_ok /*, path_b_ok */;
+ int retry = 2;
+ const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+ REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+ REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+ REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+ REG_TX_OFDM_BBON, REG_TX_TO_RX,
+ REG_TX_TO_TX, REG_RX_CCK,
+ REG_RX_OFDM, REG_RX_WAIT_RIFS,
+ REG_RX_TO_RX, REG_STANDBY,
+ REG_SLEEP, REG_PMPD_ANAEN
+ };
+ const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+ REG_TXPAUSE, REG_BEACON_CTRL,
+ REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+ };
+ const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+ REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+ REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+ REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+ REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
+ };
+ u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff;
+ u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff;
+
+ /*
+ * Note: IQ calibration must be performed after loading
+ * PHY_REG.txt , and radio_a, radio_b.txt
+ */
+
+ if (t == 0) {
+ /* Save ADDA parameters, turn Path A ADDA on */
+ rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+ RTL8XXXU_ADDA_REGS);
+ rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+ rtl8xxxu_save_regs(priv, iqk_bb_regs,
+ priv->bb_backup, RTL8XXXU_BB_REGS);
+ }
+
+ rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+ /* MAC settings */
+ rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
+
+ val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
+ val32 |= 0x0f000000;
+ rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
+
+ rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+ rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+ rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
+
+#ifdef RTL8723BU_PATH_B
+ /* Set RF mode to standby Path B */
+ if (priv->tx_paths > 1)
+ rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x10000);
+#endif
+
+#if 0
+ /* Page B init */
+ rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000);
+
+ if (priv->tx_paths > 1)
+ rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x0f600000);
+#endif
+
+ /*
+ * RX IQ calibration setting for 8723B D cut large current issue
+ * when leaving IPS
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+ val32 |= 0x80000;
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
+
+ val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
+ val32 |= 0x20;
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
+
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd);
+
+ for (i = 0; i < retry; i++) {
+ path_a_ok = rtl8723bu_iqk_path_a(priv);
+ if (path_a_ok == 0x01) {
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+#if 0 /* Only needed in restore case, we may need this when going to suspend */
+ priv->RFCalibrateInfo.TxLOK[RF_A] =
+ rtl8xxxu_read_rfreg(priv, RF_A,
+ RF6052_REG_TXM_IDAC);
+#endif
+
+ val32 = rtl8xxxu_read32(priv,
+ REG_TX_POWER_BEFORE_IQK_A);
+ result[t][0] = (val32 >> 16) & 0x3ff;
+ val32 = rtl8xxxu_read32(priv,
+ REG_TX_POWER_AFTER_IQK_A);
+ result[t][1] = (val32 >> 16) & 0x3ff;
+
+ break;
+ }
+ }
+
+ if (!path_a_ok)
+ dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
+
+ for (i = 0; i < retry; i++) {
+ path_a_ok = rtl8723bu_rx_iqk_path_a(priv);
+ if (path_a_ok == 0x03) {
+ val32 = rtl8xxxu_read32(priv,
+ REG_RX_POWER_BEFORE_IQK_A_2);
+ result[t][2] = (val32 >> 16) & 0x3ff;
+ val32 = rtl8xxxu_read32(priv,
+ REG_RX_POWER_AFTER_IQK_A_2);
+ result[t][3] = (val32 >> 16) & 0x3ff;
+
+ break;
+ }
+ }
+
+ if (!path_a_ok)
+ dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
+
+ if (priv->tx_paths > 1) {
+#if 1
+ dev_warn(dev, "%s: Path B not supported\n", __func__);
+#else
+
+ /*
+ * Path A into standby
+ */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000);
+
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ val32 |= 0x80800000;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ /* Turn Path B ADDA on */
+ rtl8xxxu_path_adda_on(priv, adda_regs, false);
+
+ for (i = 0; i < retry; i++) {
+ path_b_ok = rtl8xxxu_iqk_path_b(priv);
+ if (path_b_ok == 0x03) {
+ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+ result[t][4] = (val32 >> 16) & 0x3ff;
+ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+ result[t][5] = (val32 >> 16) & 0x3ff;
+ break;
+ }
+ }
+
+ if (!path_b_ok)
+ dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
+
+ for (i = 0; i < retry; i++) {
+ path_b_ok = rtl8723bu_rx_iqk_path_b(priv);
+ if (path_a_ok == 0x03) {
+ val32 = rtl8xxxu_read32(priv,
+ REG_RX_POWER_BEFORE_IQK_B_2);
+ result[t][6] = (val32 >> 16) & 0x3ff;
+ val32 = rtl8xxxu_read32(priv,
+ REG_RX_POWER_AFTER_IQK_B_2);
+ result[t][7] = (val32 >> 16) & 0x3ff;
+ break;
+ }
+ }
+
+ if (!path_b_ok)
+ dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__);
+#endif
+ }
+
+ /* Back to BB mode, load original value */
+ val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+ val32 &= 0x000000ff;
+ rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+ if (t) {
+ /* Reload ADDA power saving parameters */
+ rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+ RTL8XXXU_ADDA_REGS);
+
+ /* Reload MAC parameters */
+ rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+ /* Reload BB parameters */
+ rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+ priv->bb_backup, RTL8XXXU_BB_REGS);
+
+ /* Restore RX initial gain */
+ val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+ val32 &= 0xffffff00;
+ rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50);
+ rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc);
+
+ if (priv->tx_paths > 1) {
+ val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
+ val32 &= 0xffffff00;
+ rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+ val32 | 0x50);
+ rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+ val32 | xb_agc);
+ }
+
+ /* Load 0xe30 IQC default value */
+ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+ }
+}
+
static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start)
{
struct h2c_cmd h2c;
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration));
}
-static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+static void rtl8723au_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
{
struct device *dev = &priv->udev->dev;
int result[4][8]; /* last is final result */
rtl8xxxu_prepare_calibrate(priv, 0);
}
+static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+ struct device *dev = &priv->udev->dev;
+ int result[4][8]; /* last is final result */
+ int i, candidate;
+ bool path_a_ok, path_b_ok;
+ u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+ u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+ u32 val32, bt_control;
+ s32 reg_tmp = 0;
+ bool simu;
+
+ rtl8xxxu_prepare_calibrate(priv, 1);
+
+ memset(result, 0, sizeof(result));
+ candidate = -1;
+
+ path_a_ok = false;
+ path_b_ok = false;
+
+ bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU);
+
+ for (i = 0; i < 3; i++) {
+ rtl8723bu_phy_iqcalibrate(priv, result, i);
+
+ if (i == 1) {
+ simu = rtl8723bu_simularity_compare(priv, result, 0, 1);
+ if (simu) {
+ candidate = 0;
+ break;
+ }
+ }
+
+ if (i == 2) {
+ simu = rtl8723bu_simularity_compare(priv, result, 0, 2);
+ if (simu) {
+ candidate = 0;
+ break;
+ }
+
+ simu = rtl8723bu_simularity_compare(priv, result, 1, 2);
+ if (simu) {
+ candidate = 1;
+ } else {
+ for (i = 0; i < 8; i++)
+ reg_tmp += result[3][i];
+
+ if (reg_tmp)
+ candidate = 3;
+ else
+ candidate = -1;
+ }
+ }
+ }
+
+ for (i = 0; i < 4; i++) {
+ reg_e94 = result[i][0];
+ reg_e9c = result[i][1];
+ reg_ea4 = result[i][2];
+ reg_eac = result[i][3];
+ reg_eb4 = result[i][4];
+ reg_ebc = result[i][5];
+ reg_ec4 = result[i][6];
+ reg_ecc = result[i][7];
+ }
+
+ if (candidate >= 0) {
+ reg_e94 = result[candidate][0];
+ priv->rege94 = reg_e94;
+ reg_e9c = result[candidate][1];
+ priv->rege9c = reg_e9c;
+ reg_ea4 = result[candidate][2];
+ reg_eac = result[candidate][3];
+ reg_eb4 = result[candidate][4];
+ priv->regeb4 = reg_eb4;
+ reg_ebc = result[candidate][5];
+ priv->regebc = reg_ebc;
+ reg_ec4 = result[candidate][6];
+ reg_ecc = result[candidate][7];
+ dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+ dev_dbg(dev,
+ "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
+ "ecc=%x\n ", __func__, reg_e94, reg_e9c,
+ reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+ path_a_ok = true;
+ path_b_ok = true;
+ } else {
+ reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
+ reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
+ }
+
+ if (reg_e94 && candidate >= 0)
+ rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+ candidate, (reg_ea4 == 0));
+
+ if (priv->tx_paths > 1 && reg_eb4)
+ rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
+ candidate, (reg_ec4 == 0));
+
+ rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg,
+ priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+
+ rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control);
+
+ val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+ val32 |= 0x80000;
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177);
+ val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
+ val32 |= 0x20;
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
+ rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd);
+
+ if (priv->rf_paths > 1) {
+ dev_dbg(dev, "%s: beware 2T not yet supported\n", __func__);
+#ifdef RTL8723BU_PATH_B
+ if (RF_Path == 0x0) //S1
+ ODM_SetIQCbyRFpath(pDM_Odm, 0);
+ else //S0
+ ODM_SetIQCbyRFpath(pDM_Odm, 1);
+#endif
+ }
+ rtl8xxxu_prepare_calibrate(priv, 0);
+}
+
static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
{
u32 val32;
rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
- rtl8723a_phy_iq_calibrate(priv);
+ priv->fops->phy_iq_calibrate(priv);
/*
* This should enable thermal meter
.load_firmware = rtl8723au_load_firmware,
.power_on = rtl8723au_power_on,
.llt_init = rtl8xxxu_init_llt_table,
+ .phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
.writeN_block_size = 1024,
.mbox_ext_reg = REG_HMBOX_EXT_0,
.mbox_ext_width = 2,
.power_on = rtl8723au_power_on,
.llt_init = rtl8xxxu_auto_llt_table,
.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
+ .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
.writeN_block_size = 1024,
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
.mbox_ext_width = 4,
.load_firmware = rtl8192cu_load_firmware,
.power_on = rtl8192cu_power_on,
.llt_init = rtl8xxxu_init_llt_table,
+ .phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
.writeN_block_size = 128,
.mbox_ext_reg = REG_HMBOX_EXT_0,
.mbox_ext_width = 2,
.load_firmware = rtl8192eu_load_firmware,
.power_on = rtl8192eu_power_on,
.llt_init = rtl8xxxu_auto_llt_table,
+ .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
.writeN_block_size = 128,
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
.mbox_ext_width = 4,
projects / cascardo / linux.git / commitdiff