mfd: Refactor wm831x AUXADC handling into a separate file
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Thu, 2 Jun 2011 18:18:53 +0000 (19:18 +0100)
committerSamuel Ortiz <sameo@linux.intel.com>
Sun, 31 Jul 2011 21:28:20 +0000 (23:28 +0200)
In preparation for some additional work on the wm831x AUXADC code move the
support into a separate file. This is a simple code motion patch, there
should be no functional changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
drivers/mfd/Makefile
drivers/mfd/wm831x-auxadc.c [new file with mode: 0644]
drivers/mfd/wm831x-core.c

index 22a280f..0889f53 100644 (file)
@@ -23,6 +23,7 @@ obj-$(CONFIG_MFD_TC6393XB)    += tc6393xb.o tmio_core.o
 
 obj-$(CONFIG_MFD_WM8400)       += wm8400-core.o
 wm831x-objs                    := wm831x-core.o wm831x-irq.o wm831x-otp.o
+wm831x-objs                    += wm831x-auxadc.o
 obj-$(CONFIG_MFD_WM831X)       += wm831x.o
 obj-$(CONFIG_MFD_WM831X_I2C)   += wm831x-i2c.o
 obj-$(CONFIG_MFD_WM831X_SPI)   += wm831x-spi.o
diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c
new file mode 100644 (file)
index 0000000..2fc9531
--- /dev/null
@@ -0,0 +1,199 @@
+/*
+ * wm831x-auxadc.c  --  AUXADC for Wolfson WM831x PMICs
+ *
+ * Copyright 2009-2011 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/otp.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+/**
+ * wm831x_auxadc_read: Read a value from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+       int ret, src, irq_masked, timeout;
+
+       /* Are we using the interrupt? */
+       irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK);
+       irq_masked &= WM831X_AUXADC_DATA_EINT;
+
+       mutex_lock(&wm831x->auxadc_lock);
+
+       ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+                             WM831X_AUX_ENA, WM831X_AUX_ENA);
+       if (ret < 0) {
+               dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
+               goto out;
+       }
+
+       /* We force a single source at present */
+       src = input;
+       ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
+                              1 << src);
+       if (ret < 0) {
+               dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
+               goto out;
+       }
+
+       /* Clear any notification from a very late arriving interrupt */
+       try_wait_for_completion(&wm831x->auxadc_done);
+
+       ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+                             WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
+       if (ret < 0) {
+               dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
+               goto disable;
+       }
+
+       if (irq_masked) {
+               /* If we're not using interrupts then poll the
+                * interrupt status register */
+               timeout = 5;
+               while (timeout) {
+                       msleep(1);
+
+                       ret = wm831x_reg_read(wm831x,
+                                             WM831X_INTERRUPT_STATUS_1);
+                       if (ret < 0) {
+                               dev_err(wm831x->dev,
+                                       "ISR 1 read failed: %d\n", ret);
+                               goto disable;
+                       }
+
+                       /* Did it complete? */
+                       if (ret & WM831X_AUXADC_DATA_EINT) {
+                               wm831x_reg_write(wm831x,
+                                                WM831X_INTERRUPT_STATUS_1,
+                                                WM831X_AUXADC_DATA_EINT);
+                               break;
+                       } else {
+                               dev_err(wm831x->dev,
+                                       "AUXADC conversion timeout\n");
+                               ret = -EBUSY;
+                               goto disable;
+                       }
+               }
+
+               ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+               if (ret < 0) {
+                       dev_err(wm831x->dev,
+                               "Failed to read AUXADC data: %d\n", ret);
+                       goto disable;
+               }
+
+               wm831x->auxadc_data = ret;
+
+       } else {
+               /* If we are using interrupts then wait for the
+                * interrupt to complete.  Use an extremely long
+                * timeout to handle situations with heavy load where
+                * the notification of the interrupt may be delayed by
+                * threaded IRQ handling. */
+               if (!wait_for_completion_timeout(&wm831x->auxadc_done,
+                                                msecs_to_jiffies(500))) {
+                       dev_err(wm831x->dev, "Timed out waiting for AUXADC\n");
+                       ret = -EBUSY;
+                       goto disable;
+               }
+       }
+
+       src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK)
+              >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+       if (src == 14)
+               src = WM831X_AUX_CAL;
+
+       if (src != input) {
+               dev_err(wm831x->dev, "Data from source %d not %d\n",
+                       src, input);
+               ret = -EINVAL;
+       } else {
+               ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK;
+       }
+
+disable:
+       wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
+out:
+       mutex_unlock(&wm831x->auxadc_lock);
+       return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
+
+static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
+{
+       struct wm831x *wm831x = irq_data;
+       int ret;
+
+       ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+       if (ret < 0) {
+               dev_err(wm831x->dev,
+                       "Failed to read AUXADC data: %d\n", ret);
+               wm831x->auxadc_data = 0xffff;
+       } else {
+               wm831x->auxadc_data = ret;
+       }
+
+       complete(&wm831x->auxadc_done);
+
+       return IRQ_HANDLED;
+}
+
+/**
+ * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+       int ret;
+
+       ret = wm831x_auxadc_read(wm831x, input);
+       if (ret < 0)
+               return ret;
+
+       ret *= 1465;
+
+       return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
+
+void wm831x_auxadc_init(struct wm831x *wm831x)
+{
+       int ret;
+
+       mutex_init(&wm831x->auxadc_lock);
+       init_completion(&wm831x->auxadc_done);
+
+       if (wm831x->irq_base) {
+               ret = request_threaded_irq(wm831x->irq_base +
+                                          WM831X_IRQ_AUXADC_DATA,
+                                          NULL, wm831x_auxadc_irq, 0,
+                                          "auxadc", wm831x);
+               if (ret < 0)
+                       dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
+                               ret);
+       }
+}
index 480abc1..772fe58 100644 (file)
@@ -306,161 +306,6 @@ out:
 }
 EXPORT_SYMBOL_GPL(wm831x_set_bits);
 
-/**
- * wm831x_auxadc_read: Read a value from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
-       int ret, src, irq_masked, timeout;
-
-       /* Are we using the interrupt? */
-       irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK);
-       irq_masked &= WM831X_AUXADC_DATA_EINT;
-
-       mutex_lock(&wm831x->auxadc_lock);
-
-       ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
-                             WM831X_AUX_ENA, WM831X_AUX_ENA);
-       if (ret < 0) {
-               dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
-               goto out;
-       }
-
-       /* We force a single source at present */
-       src = input;
-       ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
-                              1 << src);
-       if (ret < 0) {
-               dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
-               goto out;
-       }
-
-       /* Clear any notification from a very late arriving interrupt */
-       try_wait_for_completion(&wm831x->auxadc_done);
-
-       ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
-                             WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
-       if (ret < 0) {
-               dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
-               goto disable;
-       }
-
-       if (irq_masked) {
-               /* If we're not using interrupts then poll the
-                * interrupt status register */
-               timeout = 5;
-               while (timeout) {
-                       msleep(1);
-
-                       ret = wm831x_reg_read(wm831x,
-                                             WM831X_INTERRUPT_STATUS_1);
-                       if (ret < 0) {
-                               dev_err(wm831x->dev,
-                                       "ISR 1 read failed: %d\n", ret);
-                               goto disable;
-                       }
-
-                       /* Did it complete? */
-                       if (ret & WM831X_AUXADC_DATA_EINT) {
-                               wm831x_reg_write(wm831x,
-                                                WM831X_INTERRUPT_STATUS_1,
-                                                WM831X_AUXADC_DATA_EINT);
-                               break;
-                       } else {
-                               dev_err(wm831x->dev,
-                                       "AUXADC conversion timeout\n");
-                               ret = -EBUSY;
-                               goto disable;
-                       }
-               }
-
-               ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
-               if (ret < 0) {
-                       dev_err(wm831x->dev,
-                               "Failed to read AUXADC data: %d\n", ret);
-                       goto disable;
-               }
-
-               wm831x->auxadc_data = ret;
-
-       } else {
-               /* If we are using interrupts then wait for the
-                * interrupt to complete.  Use an extremely long
-                * timeout to handle situations with heavy load where
-                * the notification of the interrupt may be delayed by
-                * threaded IRQ handling. */
-               if (!wait_for_completion_timeout(&wm831x->auxadc_done,
-                                                msecs_to_jiffies(500))) {
-                       dev_err(wm831x->dev, "Timed out waiting for AUXADC\n");
-                       ret = -EBUSY;
-                       goto disable;
-               }
-       }
-
-       src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK)
-              >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
-
-       if (src == 14)
-               src = WM831X_AUX_CAL;
-
-       if (src != input) {
-               dev_err(wm831x->dev, "Data from source %d not %d\n",
-                       src, input);
-               ret = -EINVAL;
-       } else {
-               ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK;
-       }
-
-disable:
-       wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
-out:
-       mutex_unlock(&wm831x->auxadc_lock);
-       return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
-
-static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
-{
-       struct wm831x *wm831x = irq_data;
-       int ret;
-
-       ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
-       if (ret < 0) {
-               dev_err(wm831x->dev,
-                       "Failed to read AUXADC data: %d\n", ret);
-               wm831x->auxadc_data = 0xffff;
-       } else {
-               wm831x->auxadc_data = ret;
-       }
-
-       complete(&wm831x->auxadc_done);
-
-       return IRQ_HANDLED;
-}
-
-/**
- * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
-       int ret;
-
-       ret = wm831x_auxadc_read(wm831x, input);
-       if (ret < 0)
-               return ret;
-
-       ret *= 1465;
-
-       return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
-
 static struct resource wm831x_dcdc1_resources[] = {
        {
                .start = WM831X_DC1_CONTROL_1,
@@ -1447,8 +1292,6 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 
        mutex_init(&wm831x->io_lock);
        mutex_init(&wm831x->key_lock);
-       mutex_init(&wm831x->auxadc_lock);
-       init_completion(&wm831x->auxadc_done);
        dev_set_drvdata(wm831x->dev, wm831x);
 
        ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
@@ -1603,15 +1446,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
        if (ret != 0)
                goto err;
 
-       if (wm831x->irq_base) {
-               ret = request_threaded_irq(wm831x->irq_base +
-                                          WM831X_IRQ_AUXADC_DATA,
-                                          NULL, wm831x_auxadc_irq, 0,
-                                          "auxadc", wm831x);
-               if (ret < 0)
-                       dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
-                               ret);
-       }
+       wm831x_auxadc_init(wm831x);
 
        /* The core device is up, instantiate the subdevices. */
        switch (parent) {