powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Mon, 30 Mar 2009 17:34:04 +0000 (17:34 +0000)
committerPaul Mackerras <paulus@samba.org>
Tue, 7 Apr 2009 05:07:43 +0000 (15:07 +1000)
The (relatively) new pmac_zilog driver doesn't use the pre-munged
IRQ numbers from the macio_dev unlike other macio things, it
directly maps it off the OF device-tree.

It does that because it can be initialized much earlier than the
registration of the macio devices, in order to get a serial
console early.

Unfortunately, that means that it "misses" some fixups done
by the macio layer to work around missing interrupt descriptions
in the device-tree of the Wallstreet machines.

This patch brings the necessary workaround into the pmac_zilog
driver itself to bring it back to working condition.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
drivers/serial/pmac_zilog.c

index ad34885..9c1243f 100644 (file)
@@ -1538,6 +1538,21 @@ no_dma:
        uap->port.type = PORT_PMAC_ZILOG;
        uap->port.flags = 0;
 
+       /*
+        * Fixup for the port on Gatwick for which the device-tree has
+        * missing interrupts. Normally, the macio_dev would contain
+        * fixed up interrupt info, but we use the device-tree directly
+        * here due to early probing so we need the fixup too.
+        */
+       if (uap->port.irq == NO_IRQ &&
+           np->parent && np->parent->parent &&
+           of_device_is_compatible(np->parent->parent, "gatwick")) {
+               /* IRQs on gatwick are offset by 64 */
+               uap->port.irq = irq_create_mapping(NULL, 64 + 15);
+               uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4);
+               uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5);
+       }
+
        /* Setup some valid baud rate information in the register
         * shadows so we don't write crap there before baud rate is
         * first initialized.