obj-$(CONFIG_IGB) += igb.o
igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
- e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o
+ e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o \
+ e1000_i210.o
igb-$(CONFIG_IGB_PTP) += igb_ptp.o
#include "e1000_mac.h"
#include "e1000_82575.h"
+#include "e1000_i210.h"
static s32 igb_get_invariants_82575(struct e1000_hw *);
static s32 igb_acquire_phy_82575(struct e1000_hw *);
break;
case e1000_82580:
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
reg = rd32(E1000_MDICNFG);
ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
break;
case E1000_DEV_ID_I350_SGMII:
mac->type = e1000_i350;
break;
+ case E1000_DEV_ID_I210_COPPER:
+ case E1000_DEV_ID_I210_COPPER_OEM1:
+ case E1000_DEV_ID_I210_COPPER_IT:
+ case E1000_DEV_ID_I210_FIBER:
+ case E1000_DEV_ID_I210_SERDES:
+ case E1000_DEV_ID_I210_SGMII:
+ mac->type = e1000_i210;
+ break;
+ case E1000_DEV_ID_I211_COPPER:
+ mac->type = e1000_i211;
+ break;
default:
return -E1000_ERR_MAC_INIT;
break;
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
- mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
- if (mac->type == e1000_82576)
+ switch (mac->type) {
+ case e1000_82576:
mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
- if (mac->type == e1000_82580)
+ break;
+ case e1000_82580:
mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
- if (mac->type == e1000_i350)
+ break;
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
+ break;
+ default:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+ break;
+ }
/* reset */
if (mac->type >= e1000_82580)
mac->ops.reset_hw = igb_reset_hw_82580;
else
mac->ops.reset_hw = igb_reset_hw_82575;
+
+ if (mac->type >= e1000_i210) {
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_i210;
+ } else {
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_82575;
+ }
+
/* Set if part includes ASF firmware */
mac->asf_firmware_present = true;
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid =
(rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
? true : false;
- /* enable EEE on i350 parts */
- if (mac->type == e1000_i350)
+ /* enable EEE on i350 parts and later parts */
+ if (mac->type >= e1000_i350)
dev_spec->eee_disable = false;
else
dev_spec->eee_disable = true;
/* NVM initialization */
eecd = rd32(E1000_EECD);
-
- nvm->opcode_bits = 8;
- nvm->delay_usec = 1;
- switch (nvm->override) {
- case e1000_nvm_override_spi_large:
- nvm->page_size = 32;
- nvm->address_bits = 16;
- break;
- case e1000_nvm_override_spi_small:
- nvm->page_size = 8;
- nvm->address_bits = 8;
- break;
- default:
- nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
- nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
- break;
- }
-
- nvm->type = e1000_nvm_eeprom_spi;
-
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
E1000_EECD_SIZE_EX_SHIFT);
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
+ nvm->word_size = 1 << size;
+ if (hw->mac.type < e1000_i210) {
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd
+ & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd
+ & E1000_EECD_ADDR_BITS ? 16 : 8;
+ break;
+ }
+ if (nvm->word_size == (1 << 15))
+ nvm->page_size = 128;
+
+ nvm->type = e1000_nvm_eeprom_spi;
+ } else
+ nvm->type = e1000_nvm_flash_hw;
+
/*
* Check for invalid size
*/
pr_notice("The NVM size is not valid, defaulting to 32K\n");
size = 15;
}
- nvm->word_size = 1 << size;
- if (nvm->word_size == (1 << 15))
- nvm->page_size = 128;
/* NVM Function Pointers */
- nvm->ops.acquire = igb_acquire_nvm_82575;
- if (nvm->word_size < (1 << 15))
- nvm->ops.read = igb_read_nvm_eerd;
- else
- nvm->ops.read = igb_read_nvm_spi;
-
- nvm->ops.release = igb_release_nvm_82575;
switch (hw->mac.type) {
case e1000_82580:
nvm->ops.validate = igb_validate_nvm_checksum_82580;
nvm->ops.update = igb_update_nvm_checksum_82580;
+ nvm->ops.acquire = igb_acquire_nvm_82575;
+ nvm->ops.release = igb_release_nvm_82575;
+ if (nvm->word_size < (1 << 15))
+ nvm->ops.read = igb_read_nvm_eerd;
+ else
+ nvm->ops.read = igb_read_nvm_spi;
+ nvm->ops.write = igb_write_nvm_spi;
break;
case e1000_i350:
nvm->ops.validate = igb_validate_nvm_checksum_i350;
nvm->ops.update = igb_update_nvm_checksum_i350;
+ nvm->ops.acquire = igb_acquire_nvm_82575;
+ nvm->ops.release = igb_release_nvm_82575;
+ if (nvm->word_size < (1 << 15))
+ nvm->ops.read = igb_read_nvm_eerd;
+ else
+ nvm->ops.read = igb_read_nvm_spi;
+ nvm->ops.write = igb_write_nvm_spi;
+ break;
+ case e1000_i210:
+ nvm->ops.validate = igb_validate_nvm_checksum_i210;
+ nvm->ops.update = igb_update_nvm_checksum_i210;
+ nvm->ops.acquire = igb_acquire_nvm_i210;
+ nvm->ops.release = igb_release_nvm_i210;
+ nvm->ops.read = igb_read_nvm_srrd_i210;
+ nvm->ops.valid_led_default = igb_valid_led_default_i210;
+ break;
+ case e1000_i211:
+ nvm->ops.acquire = igb_acquire_nvm_i210;
+ nvm->ops.release = igb_release_nvm_i210;
+ nvm->ops.read = igb_read_nvm_i211;
+ nvm->ops.valid_led_default = igb_valid_led_default_i210;
+ nvm->ops.validate = NULL;
+ nvm->ops.update = NULL;
+ nvm->ops.write = NULL;
break;
default:
nvm->ops.validate = igb_validate_nvm_checksum;
nvm->ops.update = igb_update_nvm_checksum;
+ nvm->ops.acquire = igb_acquire_nvm_82575;
+ nvm->ops.release = igb_release_nvm_82575;
+ if (nvm->word_size < (1 << 15))
+ nvm->ops.read = igb_read_nvm_eerd;
+ else
+ nvm->ops.read = igb_read_nvm_spi;
+ nvm->ops.write = igb_write_nvm_spi;
+ break;
}
- nvm->ops.write = igb_write_nvm_spi;
/* if part supports SR-IOV then initialize mailbox parameters */
switch (mac->type) {
if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
- } else if (hw->mac.type >= e1000_82580) {
+ } else if ((hw->mac.type == e1000_82580)
+ || (hw->mac.type == e1000_i350)) {
phy->ops.read_reg = igb_read_phy_reg_82580;
phy->ops.write_reg = igb_write_phy_reg_82580;
+ } else if (hw->phy.type >= e1000_phy_i210) {
+ phy->ops.read_reg = igb_read_phy_reg_gs40g;
+ phy->ops.write_reg = igb_write_phy_reg_gs40g;
} else {
phy->ops.read_reg = igb_read_phy_reg_igp;
phy->ops.write_reg = igb_write_phy_reg_igp;
else
phy->ops.get_cable_length = igb_get_cable_length_m88;
+ if (phy->id == I210_I_PHY_ID) {
+ phy->ops.get_cable_length =
+ igb_get_cable_length_m88_gen2;
+ phy->ops.set_d0_lplu_state =
+ igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state =
+ igb_set_d3_lplu_state_82580;
+ }
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
break;
case IGP03E1000_E_PHY_ID:
phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
break;
+ case I210_I_PHY_ID:
+ phy->type = e1000_phy_i210;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ phy->ops.check_polarity = igb_check_polarity_m88;
+ phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ break;
default:
return -E1000_ERR_PHY;
}
else if (hw->bus.func == E1000_FUNC_3)
mask = E1000_SWFW_PHY3_SM;
- return igb_acquire_swfw_sync_82575(hw, mask);
+ return hw->mac.ops.acquire_swfw_sync(hw, mask);
}
/**
else if (hw->bus.func == E1000_FUNC_3)
mask = E1000_SWFW_PHY3_SM;
- igb_release_swfw_sync_82575(hw, mask);
+ hw->mac.ops.release_swfw_sync(hw, mask);
}
/**
break;
case e1000_82580:
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
mdic = rd32(E1000_MDICNFG);
mdic &= E1000_MDICNFG_PHY_MASK;
phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
{
s32 ret_val;
- ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw, E1000_SWFW_EEP_SM);
if (ret_val)
goto out;
ret_val = igb_acquire_nvm(hw);
if (ret_val)
- igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+ hw->mac.ops.release_swfw_sync(hw, E1000_SWFW_EEP_SM);
out:
return ret_val;
static void igb_release_nvm_82575(struct e1000_hw *hw)
{
igb_release_nvm(hw);
- igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+ hw->mac.ops.release_swfw_sync(hw, E1000_SWFW_EEP_SM);
}
/**
* is no link.
*/
igb_clear_hw_cntrs_82575(hw);
-
return ret_val;
}
}
}
switch (hw->phy.type) {
+ case e1000_phy_i210:
case e1000_phy_m88:
if (hw->phy.id == I347AT4_E_PHY_ID ||
hw->phy.id == M88E1112_E_PHY_ID)
/* Determine whether or not a global dev reset is requested */
if (global_device_reset &&
- igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
+ hw->mac.ops.acquire_swfw_sync(hw, swmbsw_mask))
global_device_reset = false;
if (global_device_reset &&
/* Release semaphore */
if (global_device_reset)
- igb_release_swfw_sync_82575(hw, swmbsw_mask);
+ hw->mac.ops.release_swfw_sync(hw, swmbsw_mask);
return ret_val;
}
#define E1000_SRRCTL_DROP_EN 0x80000000
#define E1000_SRRCTL_TIMESTAMP 0x40000000
+
#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002
#define E1000_MRQC_ENABLE_VMDQ 0x00000003
-#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005
#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005
#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
#define E1000_ERR_INVALID_ARGUMENT 16
#define E1000_ERR_NO_SPACE 17
#define E1000_ERR_NVM_PBA_SECTION 18
+#define E1000_ERR_INVM_VALUE_NOT_FOUND 19
/* Loop limit on how long we wait for auto-negotiation to complete */
#define COPPER_LINK_UP_LIMIT 10
#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+
/* Offset to data in NVM read/write registers */
#define E1000_NVM_RW_REG_DATA 16
#define NVM_CHECKSUM_REG 0x003F
#define NVM_COMPATIBILITY_REG_3 0x0003
#define NVM_COMPATIBILITY_BIT_MASK 0x8000
+#define NVM_MAC_ADDR 0x0000
+#define NVM_SUB_DEV_ID 0x000B
+#define NVM_SUB_VEN_ID 0x000C
+#define NVM_DEV_ID 0x000D
+#define NVM_VEN_ID 0x000E
+#define NVM_INIT_CTRL_2 0x000F
+#define NVM_INIT_CTRL_4 0x0013
+#define NVM_LED_1_CFG 0x001C
+#define NVM_LED_0_2_CFG 0x001F
+
#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
#define NVM_PBA_OFFSET_0 8
#define NVM_PBA_OFFSET_1 9
+#define NVM_RESERVED_WORD 0xFFFF
#define NVM_PBA_PTR_GUARD 0xFAFA
#define NVM_WORD_SIZE_BASE_SHIFT 6
#define I82580_I_PHY_ID 0x015403A0
#define I350_I_PHY_ID 0x015403B0
#define M88_VENDOR 0x0141
+#define I210_I_PHY_ID 0x01410C00
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */
#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEE Tx LPI Enable */
#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEE Rx LPI Enable */
+#define E1000_EEER_FRC_AN 0x10000000 /* Enable EEE in loopback */
#define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */
/* SerDes Control */
#define E1000_DEV_ID_I350_FIBER 0x1522
#define E1000_DEV_ID_I350_SERDES 0x1523
#define E1000_DEV_ID_I350_SGMII 0x1524
+#define E1000_DEV_ID_I210_COPPER 0x1533
+#define E1000_DEV_ID_I210_COPPER_OEM1 0x1534
+#define E1000_DEV_ID_I210_COPPER_IT 0x1535
+#define E1000_DEV_ID_I210_FIBER 0x1536
+#define E1000_DEV_ID_I210_SERDES 0x1537
+#define E1000_DEV_ID_I210_SGMII 0x1538
+#define E1000_DEV_ID_I211_COPPER 0x1539
#define E1000_REVISION_2 2
#define E1000_REVISION_4 4
e1000_82576,
e1000_82580,
e1000_i350,
+ e1000_i210,
+ e1000_i211,
e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
};
e1000_phy_igp_3,
e1000_phy_ife,
e1000_phy_82580,
+ e1000_phy_i210,
};
enum e1000_bus_type {
void (*rar_set)(struct e1000_hw *, u8 *, u32);
s32 (*read_mac_addr)(struct e1000_hw *);
s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
+ s32 (*acquire_swfw_sync)(struct e1000_hw *, u16);
+ void (*release_swfw_sync)(struct e1000_hw *, u16);
+
};
struct e1000_phy_operations {
s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
s32 (*update)(struct e1000_hw *);
s32 (*validate)(struct e1000_hw *);
+ s32 (*valid_led_default)(struct e1000_hw *, u16 *);
};
struct e1000_info {
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+
+/* e1000_i210
+ * e1000_i211
+ */
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#include "e1000_hw.h"
+#include "e1000_i210.h"
+
+static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw);
+static void igb_put_hw_semaphore_i210(struct e1000_hw *hw);
+static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw);
+
+/**
+ * igb_acquire_nvm_i210 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclusive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 igb_acquire_nvm_i210(struct e1000_hw *hw)
+{
+ return igb_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_release_nvm_i210 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ **/
+void igb_release_nvm_i210(struct e1000_hw *hw)
+{
+ igb_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 ret_val = E1000_SUCCESS;
+ s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+ while (i < timeout) {
+ if (igb_get_hw_semaphore_i210(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ if (!(swfw_sync & fwmask))
+ break;
+
+ /*
+ * Firmware currently using resource (fwmask)
+ */
+ igb_put_hw_semaphore_i210(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore_i210(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_swfw_sync_i210 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (igb_get_hw_semaphore_i210(hw) != E1000_SUCCESS)
+ ; /* Empty */
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore_i210(hw);
+}
+
+/**
+ * igb_get_hw_semaphore_i210 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = E1000_SUCCESS;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg("Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_put_hw_semaphore_i210 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+static void igb_put_hw_semaphore_i210(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = rd32(E1000_SWSM);
+
+ swsm &= ~E1000_SWSM_SWESMBI;
+
+ wr32(E1000_SWSM, swsm);
+}
+
+/**
+ * igb_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the Shadow Ram to read
+ * @words: number of words to read
+ * @data: word read from the Shadow Ram
+ *
+ * Reads a 16 bit word from the Shadow Ram using the EERD register.
+ * Uses necessary synchronization semaphores.
+ **/
+s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 status = E1000_SUCCESS;
+ u16 i, count;
+
+ /* We cannot hold synchronization semaphores for too long,
+ * because of forceful takeover procedure. However it is more efficient
+ * to read in bursts than synchronizing access for each word. */
+ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+ count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+ E1000_EERD_EEWR_MAX_COUNT : (words - i);
+ if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+ status = igb_read_nvm_eerd(hw, offset, count,
+ data + i);
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ if (status != E1000_SUCCESS)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow RAM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow RAM
+ *
+ * Writes data to Shadow RAM at offset using EEWR register.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * data will not be committed to FLASH and also Shadow RAM will most likely
+ * contain an invalid checksum.
+ *
+ * If error code is returned, data and Shadow RAM may be inconsistent - buffer
+ * partially written.
+ **/
+s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 status = E1000_SUCCESS;
+ u16 i, count;
+
+ /* We cannot hold synchronization semaphores for too long,
+ * because of forceful takeover procedure. However it is more efficient
+ * to write in bursts than synchronizing access for each word. */
+ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+ count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+ E1000_EERD_EEWR_MAX_COUNT : (words - i);
+ if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+ status = igb_write_nvm_srwr(hw, offset, count,
+ data + i);
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ if (status != E1000_SUCCESS)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * igb_write_nvm_srwr - Write to Shadow Ram using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow Ram to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow Ram
+ *
+ * Writes data to Shadow Ram at offset using EEWR register.
+ *
+ * If igb_update_nvm_checksum is not called after this function , the
+ * Shadow Ram will most likely contain an invalid checksum.
+ **/
+static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, k, eewr = 0;
+ u32 attempts = 100000;
+ s32 ret_val = E1000_SUCCESS;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * too many words for the offset, and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+ (data[i] << E1000_NVM_RW_REG_DATA) |
+ E1000_NVM_RW_REG_START;
+
+ wr32(E1000_SRWR, eewr);
+
+ for (k = 0; k < attempts; k++) {
+ if (E1000_NVM_RW_REG_DONE &
+ rd32(E1000_SRWR)) {
+ ret_val = E1000_SUCCESS;
+ break;
+ }
+ udelay(5);
+ }
+
+ if (ret_val != E1000_SUCCESS) {
+ hw_dbg("Shadow RAM write EEWR timed out\n");
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_nvm_i211 - Read NVM wrapper function for I211
+ * @hw: pointer to the HW structure
+ * @address: the word address (aka eeprom offset) to read
+ * @data: pointer to the data read
+ *
+ * Wrapper function to return data formerly found in the NVM.
+ **/
+s32 igb_read_nvm_i211(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ /* Only the MAC addr is required to be present in the iNVM */
+ switch (offset) {
+ case NVM_MAC_ADDR:
+ ret_val = igb_read_invm_i211(hw, offset, &data[0]);
+ ret_val |= igb_read_invm_i211(hw, offset+1, &data[1]);
+ ret_val |= igb_read_invm_i211(hw, offset+2, &data[2]);
+ if (ret_val != E1000_SUCCESS)
+ hw_dbg("MAC Addr not found in iNVM\n");
+ break;
+ case NVM_ID_LED_SETTINGS:
+ case NVM_INIT_CTRL_2:
+ case NVM_INIT_CTRL_4:
+ case NVM_LED_1_CFG:
+ case NVM_LED_0_2_CFG:
+ igb_read_invm_i211(hw, offset, data);
+ break;
+ case NVM_COMPAT:
+ *data = ID_LED_DEFAULT_I210;
+ break;
+ case NVM_SUB_DEV_ID:
+ *data = hw->subsystem_device_id;
+ break;
+ case NVM_SUB_VEN_ID:
+ *data = hw->subsystem_vendor_id;
+ break;
+ case NVM_DEV_ID:
+ *data = hw->device_id;
+ break;
+ case NVM_VEN_ID:
+ *data = hw->vendor_id;
+ break;
+ default:
+ hw_dbg("NVM word 0x%02x is not mapped.\n", offset);
+ *data = NVM_RESERVED_WORD;
+ break;
+ }
+ return ret_val;
+}
+
+/**
+ * igb_read_invm_i211 - Reads OTP
+ * @hw: pointer to the HW structure
+ * @address: the word address (aka eeprom offset) to read
+ * @data: pointer to the data read
+ *
+ * Reads 16-bit words from the OTP. Return error when the word is not
+ * stored in OTP.
+ **/
+s32 igb_read_invm_i211(struct e1000_hw *hw, u16 address, u16 *data)
+{
+ s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ u32 invm_dword;
+ u16 i;
+ u8 record_type, word_address;
+
+ for (i = 0; i < E1000_INVM_SIZE; i++) {
+ invm_dword = rd32(E1000_INVM_DATA_REG(i));
+ /* Get record type */
+ record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword);
+ if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE)
+ break;
+ if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE)
+ i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS;
+ if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE)
+ i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS;
+ if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) {
+ word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword);
+ if (word_address == (u8)address) {
+ *data = INVM_DWORD_TO_WORD_DATA(invm_dword);
+ hw_dbg("Read INVM Word 0x%02x = %x",
+ address, *data);
+ status = E1000_SUCCESS;
+ break;
+ }
+ }
+ }
+ if (status != E1000_SUCCESS)
+ hw_dbg("Requested word 0x%02x not found in OTP\n", address);
+ return status;
+}
+
+/**
+ * igb_validate_nvm_checksum_i210 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw)
+{
+ s32 status = E1000_SUCCESS;
+ s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *);
+
+ if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+
+ /*
+ * Replace the read function with semaphore grabbing with
+ * the one that skips this for a while.
+ * We have semaphore taken already here.
+ */
+ read_op_ptr = hw->nvm.ops.read;
+ hw->nvm.ops.read = igb_read_nvm_eerd;
+
+ status = igb_validate_nvm_checksum(hw);
+
+ /* Revert original read operation. */
+ hw->nvm.ops.read = read_op_ptr;
+
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+
+/**
+ * igb_update_nvm_checksum_i210 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM. Next commit EEPROM data onto the Flash.
+ **/
+s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ ret_val = igb_read_nvm_eerd(hw, 0, 1, &nvm_data);
+ if (ret_val != E1000_SUCCESS) {
+ hw_dbg("EEPROM read failed\n");
+ goto out;
+ }
+
+ if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+ /*
+ * Do not use hw->nvm.ops.write, hw->nvm.ops.read
+ * because we do not want to take the synchronization
+ * semaphores twice here.
+ */
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = igb_read_nvm_eerd(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw->nvm.ops.release(hw);
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = igb_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
+ &checksum);
+ if (ret_val != E1000_SUCCESS) {
+ hw->nvm.ops.release(hw);
+ hw_dbg("NVM Write Error while updating checksum.\n");
+ goto out;
+ }
+
+ hw->nvm.ops.release(hw);
+
+ ret_val = igb_update_flash_i210(hw);
+ } else {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_flash_i210 - Commit EEPROM to the flash
+ * @hw: pointer to the HW structure
+ *
+ **/
+s32 igb_update_flash_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u32 flup;
+
+ ret_val = igb_pool_flash_update_done_i210(hw);
+ if (ret_val == -E1000_ERR_NVM) {
+ hw_dbg("Flash update time out\n");
+ goto out;
+ }
+
+ flup = rd32(E1000_EECD) | E1000_EECD_FLUPD_I210;
+ wr32(E1000_EECD, flup);
+
+ ret_val = igb_pool_flash_update_done_i210(hw);
+ if (ret_val == E1000_SUCCESS)
+ hw_dbg("Flash update complete\n");
+ else
+ hw_dbg("Flash update time out\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_pool_flash_update_done_i210 - Pool FLUDONE status.
+ * @hw: pointer to the HW structure
+ *
+ **/
+s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_NVM;
+ u32 i, reg;
+
+ for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
+ reg = rd32(E1000_EECD);
+ if (reg & E1000_EECD_FLUDONE_I210) {
+ ret_val = E1000_SUCCESS;
+ break;
+ }
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_valid_led_default_i210 - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+ switch (hw->phy.media_type) {
+ case e1000_media_type_internal_serdes:
+ *data = ID_LED_DEFAULT_I210_SERDES;
+ break;
+ case e1000_media_type_copper:
+ default:
+ *data = ID_LED_DEFAULT_I210;
+ break;
+ }
+ }
+out:
+ return ret_val;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_I210_H_
+#define _E1000_I210_H_
+
+extern s32 igb_update_flash_i210(struct e1000_hw *hw);
+extern s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw);
+extern s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw);
+extern s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+extern s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+extern s32 igb_read_invm_i211(struct e1000_hw *hw, u16 address, u16 *data);
+extern s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+extern void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+extern s32 igb_acquire_nvm_i210(struct e1000_hw *hw);
+extern void igb_release_nvm_i210(struct e1000_hw *hw);
+extern s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
+extern s32 igb_read_nvm_i211(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_EEPROM_FLASH_SIZE_WORD 0x11
+
+#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
+ (u8)((invm_dword) & 0x7)
+#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
+ (u8)(((invm_dword) & 0x0000FE00) >> 9)
+#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
+ (u16)(((invm_dword) & 0xFFFF0000) >> 16)
+
+enum E1000_INVM_STRUCTURE_TYPE {
+ E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00,
+ E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01,
+ E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02,
+ E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03,
+ E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04,
+ E1000_INVM_INVALIDATED_STRUCTURE = 0x0F,
+};
+
+#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8
+#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1
+
+#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \
+ (ID_LED_OFF1_OFF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+
+#endif
ret_val = igb_set_fc_watermarks(hw);
out:
+
return ret_val;
}
static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
u16 *phy_ctrl);
static s32 igb_wait_autoneg(struct e1000_hw *hw);
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw);
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] =
hw_dbg("Error committing the PHY changes\n");
goto out;
}
+ if (phy->type == e1000_phy_i210) {
+ ret_val = igb_set_master_slave_mode(hw);
+ if (ret_val)
+ return ret_val;
+ }
out:
return ret_val;
goto out;
if (!link) {
- if (hw->phy.type != e1000_phy_m88 ||
- hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID) {
+ bool reset_dsp = true;
+
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case I210_I_PHY_ID:
+ reset_dsp = false;
+ break;
+ default:
+ if (hw->phy.type != e1000_phy_m88)
+ reset_dsp = false;
+ break;
+ }
+ if (!reset_dsp)
hw_dbg("Link taking longer than expected.\n");
- } else {
-
+ else {
/*
* We didn't get link.
* Reset the DSP and cross our fingers.
if (hw->phy.type != e1000_phy_m88 ||
hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID)
+ hw->phy.id == M88E1112_E_PHY_ID ||
+ hw->phy.id == I210_I_PHY_ID)
goto out;
ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
u16 phy_data, offset, mask;
switch (phy->type) {
+ case e1000_phy_i210:
case e1000_phy_m88:
case e1000_phy_gg82563:
offset = M88E1000_PHY_SPEC_STATUS;
*
* Polarity is determined based on the PHY specific status register.
**/
-static s32 igb_check_polarity_m88(struct e1000_hw *hw)
+s32 igb_check_polarity_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u16 phy_data, phy_data2, index, default_page, is_cm;
switch (hw->phy.id) {
+ case I210_I_PHY_ID:
case I347AT4_E_PHY_ID:
/* Remember the original page select and set it to 7 */
ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
void igb_power_up_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
+ u16 power_reg = 0;
/* The PHY will retain its settings across a power down/up cycle */
hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
mii_reg &= ~MII_CR_POWER_DOWN;
+ if (hw->phy.type == e1000_phy_i210) {
+ hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
+ power_reg &= ~GS40G_CS_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
+ }
hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
}
void igb_power_down_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
+ u16 power_reg = 0;
/* The PHY will retain its settings across a power down/up cycle */
hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
+
+ /* i210 Phy requires an additional bit for power up/down */
+ if (hw->phy.type == e1000_phy_i210) {
+ hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
+ power_reg |= GS40G_CS_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
+ }
hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
msleep(1);
}
out:
return ret_val;
}
+
+/**
+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to write to
+ * upper half is page to use.
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to read to
+ * upper half is page to use.
+ * @data: data to read at register offset
+ *
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_set_master_slave_mode - Setup PHY for Master/slave mode
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Master/slave mode
+ **/
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ /* Resolve Master/Slave mode */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (hw->phy.ms_type) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ /* fall-through */
+ default:
+ break;
+ }
+
+ return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
+}
s32 igb_get_phy_info_82580(struct e1000_hw *hw);
s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
s32 igb_get_cable_length_82580(struct e1000_hw *hw);
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_check_polarity_m88(struct e1000_hw *hw);
/* IGP01E1000 Specific Registers */
#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+/* GS40G - I210 PHY defines */
+#define GS40G_PAGE_SELECT 0x16
+#define GS40G_PAGE_SHIFT 16
+#define GS40G_OFFSET_MASK 0xFFFF
+#define GS40G_PAGE_2 0x20000
+#define GS40G_MAC_REG2 0x15
+#define GS40G_MAC_LB 0x4140
+#define GS40G_MAC_SPEED_1G 0X0006
+#define GS40G_COPPER_SPEC 0x0010
+#define GS40G_CS_POWER_DOWN 0x0002
+#define GS40G_LINE_LB 0x4000
+
#endif
#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
+#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */
+#define E1000_I210_FLMNGCTL 0x12038
+#define E1000_I210_FLMNGDATA 0x1203C
+#define E1000_I210_FLMNGCNT 0x12040
+
+#define E1000_I210_FLSWCTL 0x12048
+#define E1000_I210_FLSWDATA 0x1204C
+#define E1000_I210_FLSWCNT 0x12050
+
+#define E1000_I210_FLA 0x1201C
+
+#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n))
+#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */
+
#endif
#define MAX_Q_VECTORS 8
/* Transmit and receive queues */
-#define IGB_MAX_RX_QUEUES (adapter->vfs_allocated_count ? 2 : \
- (hw->mac.type > e1000_82575 ? 8 : 4))
+#define IGB_MAX_RX_QUEUES ((adapter->vfs_allocated_count ? 2 : \
+ (hw->mac.type > e1000_82575 ? 8 : 4)))
+#define IGB_MAX_RX_QUEUES_I210 4
+#define IGB_MAX_RX_QUEUES_I211 2
#define IGB_MAX_TX_QUEUES 16
-
+#define IGB_MAX_TX_QUEUES_I210 4
+#define IGB_MAX_TX_QUEUES_I211 2
#define IGB_MAX_VF_MC_ENTRIES 30
#define IGB_MAX_VF_FUNCTIONS 8
#define IGB_MAX_VFTA_ENTRIES 128
regs_buff[548] = rd32(E1000_TDFT);
regs_buff[549] = rd32(E1000_TDFHS);
regs_buff[550] = rd32(E1000_TDFPC);
- regs_buff[551] = adapter->stats.o2bgptc;
- regs_buff[552] = adapter->stats.b2ospc;
- regs_buff[553] = adapter->stats.o2bspc;
- regs_buff[554] = adapter->stats.b2ogprc;
+
+ if (hw->mac.type > e1000_82580) {
+ regs_buff[551] = adapter->stats.o2bgptc;
+ regs_buff[552] = adapter->stats.b2ospc;
+ regs_buff[553] = adapter->stats.o2bspc;
+ regs_buff[554] = adapter->stats.b2ogprc;
+ }
if (hw->mac.type != e1000_82576)
return;
if (eeprom->len == 0)
return -EOPNOTSUPP;
+ if (hw->mac.type == e1000_i211)
+ return -EOPNOTSUPP;
+
if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
return -EFAULT;
#define TABLE64_TEST_LO 5
#define TABLE64_TEST_HI 6
+/* i210 reg test */
+static struct igb_reg_test reg_test_i210[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* RDH is read-only for i210, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0x900FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0, 0 }
+};
+
/* i350 reg test */
static struct igb_reg_test reg_test_i350[] = {
{ E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
test = reg_test_i350;
toggle = 0x7FEFF3FF;
break;
+ case e1000_i210:
+ case e1000_i211:
+ test = reg_test_i210;
+ toggle = 0x7FEFF3FF;
+ break;
case e1000_82580:
test = reg_test_82580;
toggle = 0x7FEFF3FF;
static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
{
- u16 temp;
- u16 checksum = 0;
- u16 i;
-
*data = 0;
- /* Read and add up the contents of the EEPROM */
- for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
- if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
- *data = 1;
- break;
- }
- checksum += temp;
- }
- /* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16) NVM_SUM) && !(*data))
- *data = 2;
+ /* Validate eeprom on all parts but i211 */
+ if (adapter->hw.mac.type != e1000_i211) {
+ if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0)
+ *data = 2;
+ }
return *data;
}
ics_mask = 0x77DCFED5;
break;
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
ics_mask = 0x77DCFED5;
break;
default:
{
struct e1000_hw *hw = &adapter->hw;
u32 ctrl_reg = 0;
+ u16 phy_reg = 0;
hw->mac.autoneg = false;
- if (hw->phy.type == e1000_phy_m88) {
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
/* Auto-MDI/MDIX Off */
igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
/* reset to update Auto-MDI/MDIX */
igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
/* autoneg off */
igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
- } else if (hw->phy.type == e1000_phy_82580) {
+ break;
+ case e1000_phy_82580:
/* enable MII loopback */
igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
+ break;
+ case e1000_phy_i210:
+ /* set loopback speed in PHY */
+ igb_read_phy_reg(hw, (GS40G_PAGE_SELECT & GS40G_PAGE_2),
+ &phy_reg);
+ phy_reg |= GS40G_MAC_SPEED_1G;
+ igb_write_phy_reg(hw, (GS40G_PAGE_SELECT & GS40G_PAGE_2),
+ phy_reg);
+ ctrl_reg = rd32(E1000_CTRL_EXT);
+ default:
+ break;
}
- ctrl_reg = rd32(E1000_CTRL);
-
/* force 1000, set loopback */
igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
E1000_CTRL_FD | /* Force Duplex to FULL */
E1000_CTRL_SLU); /* Set link up enable bit */
- if (hw->phy.type == e1000_phy_m88)
+ if ((hw->phy.type == e1000_phy_m88) || (hw->phy.type == e1000_phy_i210))
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
wr32(E1000_CTRL, ctrl_reg);
/* Disable the receiver on the PHY so when a cable is plugged in, the
* PHY does not begin to autoneg when a cable is reconnected to the NIC.
*/
- if (hw->phy.type == e1000_phy_m88)
+ if ((hw->phy.type == e1000_phy_m88) || (hw->phy.type == e1000_phy_i210))
igb_phy_disable_receiver(adapter);
udelay(500);
*data = 0;
goto out;
}
+ if ((adapter->hw.mac.type == e1000_i210)
+ || (adapter->hw.mac.type == e1000_i210)) {
+ dev_err(&adapter->pdev->dev,
+ "Loopback test not supported "
+ "on this part at this time.\n");
+ *data = 0;
+ goto out;
+ }
*data = igb_setup_desc_rings(adapter);
if (*data)
goto out;
};
static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
case e1000_82575:
case e1000_82580:
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
default:
for (; i < adapter->num_rx_queues; i++)
adapter->rx_ring[i]->reg_idx = rbase_offset + i;
if (adapter->hw.mac.type >= e1000_82576)
set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
- /* On i350, loopback VLAN packets have the tag byte-swapped. */
- if (adapter->hw.mac.type == e1000_i350)
+ /*
+ * On i350, i210, and i211, loopback VLAN packets
+ * have the tag byte-swapped.
+ * */
+ if (adapter->hw.mac.type >= e1000_i350)
set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
adapter->rx_ring[i] = ring;
break;
case e1000_82580:
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
/*
* On 82580 and newer adapters the scheme is similar to 82576
* however instead of ordering column-major we have things
case e1000_82576:
case e1000_82580:
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
/* Turn on MSI-X capability first, or our settings
* won't stick. And it will take days to debug. */
wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
numvecs += adapter->num_tx_queues;
+ /* i210 and i211 can only have 4 MSIX vectors for rx/tx queues. */
+ if ((adapter->hw.mac.type == e1000_i210)
+ || (adapter->hw.mac.type == e1000_i211))
+ numvecs = 4;
+
/* store the number of vectors reserved for queues */
adapter->num_q_vectors = numvecs;
numvecs++;
adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
GFP_KERNEL);
+
if (!adapter->msix_entries)
goto msi_only;
pba &= E1000_RXPBS_SIZE_MASK_82576;
break;
case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
default:
pba = E1000_PBA_34K;
break;
*/
if (pdev->is_virtfn) {
WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
- pci_name(pdev), pdev->vendor, pdev->device);
+ pci_name(pdev), pdev->vendor, pdev->device);
return -EINVAL;
}
* known good starting state */
hw->mac.ops.reset_hw(hw);
- /* make sure the NVM is good */
- if (hw->nvm.ops.validate(hw) < 0) {
- dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
- err = -EIO;
- goto err_eeprom;
+ /*
+ * make sure the NVM is good , i211 parts have special NVM that
+ * doesn't contain a checksum
+ */
+ if (hw->mac.type != e1000_i211) {
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
}
/* copy the MAC address out of the NVM */
adapter->num_rx_queues, adapter->num_tx_queues);
switch (hw->mac.type) {
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
igb_set_eee_i350(hw);
break;
default:
{
#ifdef CONFIG_PCI_IOV
struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
int old_vfs = igb_find_enabled_vfs(adapter);
int i;
+ /* Virtualization features not supported on i210 family. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
+ return;
+
if (old_vfs) {
dev_info(&pdev->dev, "%d pre-allocated VFs found - override "
"max_vfs setting of %d\n", old_vfs, max_vfs);
adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
sizeof(struct vf_data_storage), GFP_KERNEL);
+
/* if allocation failed then we do not support SR-IOV */
if (!adapter->vf_data) {
adapter->vfs_allocated_count = 0;
} else
adapter->vfs_allocated_count = max_vfs;
break;
+ case e1000_i210:
+ case e1000_i211:
+ adapter->vfs_allocated_count = 0;
+ break;
default:
break;
}
#endif /* CONFIG_PCI_IOV */
- adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+ switch (hw->mac.type) {
+ case e1000_i210:
+ adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES_I210,
+ num_online_cpus());
+ break;
+ case e1000_i211:
+ adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES_I211,
+ num_online_cpus());
+ break;
+ default:
+ adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES,
+ num_online_cpus());
+ break;
+ }
/* i350 cannot do RSS and SR-IOV at the same time */
if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
adapter->rss_queues = 1;
/* Explicitly disable IRQ since the NIC can be in any state. */
igb_irq_disable(adapter);
- if (hw->mac.type == e1000_i350)
+ if (hw->mac.type >= e1000_i350)
adapter->flags &= ~IGB_FLAG_DMAC;
set_bit(__IGB_DOWN, &adapter->state);
/* Don't need to set TUOFL or IPOFL, they default to 1 */
wr32(E1000_RXCSUM, rxcsum);
+ /*
+ * Generate RSS hash based on TCP port numbers and/or
+ * IPv4/v6 src and dst addresses since UDP cannot be
+ * hashed reliably due to IP fragmentation
+ */
+
+ mrqc = E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
/* If VMDq is enabled then we set the appropriate mode for that, else
* we default to RSS so that an RSS hash is calculated per packet even
wr32(E1000_VT_CTL, vtctl);
}
if (adapter->rss_queues > 1)
- mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+ mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
else
- mrqc = E1000_MRQC_ENABLE_VMDQ;
+ mrqc |= E1000_MRQC_ENABLE_VMDQ;
} else {
- mrqc = E1000_MRQC_ENABLE_RSS_4Q;
+ if (hw->mac.type != e1000_i211)
+ mrqc |= E1000_MRQC_ENABLE_RSS_4Q;
}
igb_vmm_control(adapter);
- /*
- * Generate RSS hash based on TCP port numbers and/or
- * IPv4/v6 src and dst addresses since UDP cannot be
- * hashed reliably due to IP fragmentation
- */
- mrqc |= E1000_MRQC_RSS_FIELD_IPV4 |
- E1000_MRQC_RSS_FIELD_IPV4_TCP |
- E1000_MRQC_RSS_FIELD_IPV6 |
- E1000_MRQC_RSS_FIELD_IPV6_TCP |
- E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
-
wr32(E1000_MRQC, mrqc);
}
* we will have issues with VLAN tag stripping not being done for frames
* that are only arriving because we are the default pool
*/
- if (hw->mac.type < e1000_82576)
+ if ((hw->mac.type < e1000_82576) || (hw->mac.type > e1000_i350))
return;
vmolr |= rd32(E1000_VMOLR(vfn)) &
bool ret = false;
u32 ctrl_ext, thstat;
- /* check for thermal sensor event on i350, copper only */
+ /* check for thermal sensor event on i350 copper only */
if (hw->mac.type == e1000_i350) {
thstat = rd32(E1000_THSTAT);
ctrl_ext = rd32(E1000_CTRL_EXT);
switch (hw->mac.type) {
case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
default:
/* replication is not supported for 82575 */
return;
struct e1000_hw *hw = &adapter->hw;
switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
case e1000_i350:
case e1000_82580:
adapter->caps.owner = THIS_MODULE;
unsigned long flags;
switch (adapter->hw.mac.type) {
+ case e1000_i210:
+ case e1000_i211:
case e1000_i350:
case e1000_82580:
case e1000_82576:
projects / cascardo / linux.git / commitdiff