http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
- sama5d2 family
- - sama5d27
+ - sama5d21
+ - sama5d22
+ - sama5d23
+ - sama5d24
+ - sama5d26
+ - sama5d27 (device superset)
+ - sama5d28 (device superset + environmental monitors)
+ Datasheet
- Coming soon
+ http://www.atmel.com/Images/Atmel-11267-32-bit-Cortex-A5-Microcontroller-SAMA5D2_Datasheet.pdf
Linux kernel information
number to 1.
- fsl,magic-packet : If present, indicates that the hardware supports waking
up via magic packet.
+- fsl,err006687-workaround-present: If present indicates that the system has
+ the hardware workaround for ERR006687 applied and does not need a software
+ workaround.
Optional subnodes:
- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
- "renesas,r8a7793-sysc" (R-Car M2-N)
- "renesas,r8a7794-sysc" (R-Car E2)
- "renesas,r8a7795-sysc" (R-Car H3)
+ - "renesas,r8a7796-sysc" (R-Car M3-W)
- reg: Address start and address range for the device.
- #power-domain-cells: Must be 1.
F: arch/arm/mach-s3c64xx/
F: arch/arm/mach-s5p*/
F: arch/arm/mach-exynos*/
-F: drivers/*/*s3c2410*
-F: drivers/*/*/*s3c2410*
+F: drivers/*/*s3c24*
+F: drivers/*/*/*s3c24*
+F: drivers/*/*s3c64xx*
+F: drivers/*/*s5pv210*
F: drivers/memory/samsung/*
F: drivers/soc/samsung/*
F: drivers/spi/spi-s3c*
M: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
L: linux-arm-kernel@lists.infradead.org
S: Maintained
-F: arch/arm/mach-tango/
-F: arch/arm/boot/dts/tango*
+N: tango
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Florian Fainelli <f.fainelli@gmail.com>
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
-L: bcm-kernel-feedback-list@broadcom.com
+M: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
S: Maintained
+N: bcm281*
+N: bcm113*
+N: bcm216*
+N: kona
F: arch/arm/mach-bcm/
-F: arch/arm/boot/dts/bcm113*
-F: arch/arm/boot/dts/bcm216*
-F: arch/arm/boot/dts/bcm281*
-F: arch/arm64/boot/dts/broadcom/
-F: arch/arm/configs/bcm_defconfig
-F: drivers/mmc/host/sdhci-bcm-kona.c
-F: drivers/clocksource/bcm_kona_timer.c
BROADCOM BCM2835 ARM ARCHITECTURE
M: Stephen Warren <swarren@wwwdotorg.org>
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
+M: Rafał Miłecki <zajec5@gmail.com>
+M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: arch/arm/mach-bcm/bcm_5301x.c
-F: arch/arm/boot/dts/bcm5301x.dtsi
+F: arch/arm/boot/dts/bcm5301x*.dtsi
F: arch/arm/boot/dts/bcm470*
BROADCOM BCM63XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
+M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/stblinux.git
S: Maintained
-F: arch/arm/mach-bcm/bcm63xx.c
-F: arch/arm/include/debug/bcm63xx.S
+N: bcm63xx
BROADCOM BCM63XX/BCM33XX UDC DRIVER
M: Kevin Cernekee <cernekee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
M: Gregory Fong <gregory.0xf0@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
+M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/stblinux.git
S: Maintained
F: arch/arm/mach-bcm/*brcmstb*
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
M: Jon Mason <jonmason@broadcom.com>
+M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/cygnus-linux.git
S: Maintained
N: iproc
N: cygnus
-N: nsp
+N: bcm[-_]nsp
N: bcm9113*
N: bcm9583*
N: bcm9585*
N: bcm585*
N: bcm586*
N: bcm88312
+F: arch/arm64/boot/dts/broadcom/ns2*
+F: drivers/clk/bcm/clk-ns*
+F: drivers/pinctrl/bcm/pinctrl-ns*
BROADCOM BRCMSTB GPIO DRIVER
M: Gregory Fong <gregory.0xf0@gmail.com>
BROADCOM VULCAN ARM64 SOC
M: Jayachandran C. <jchandra@broadcom.com>
+M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: arch/arm64/boot/dts/broadcom/vulcan*
select SPARSE_IRQ
select USE_OF
-
-config ARCH_CLPS711X
- bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
- select AUTO_ZRELADDR
- select COMMON_CLK
- select CPU_ARM720T
- select GENERIC_CLOCKEVENTS
- select CLPS711X_TIMER
- select GPIOLIB
- select MFD_SYSCON
- select SOC_BUS
- help
- Support for Cirrus Logic 711x/721x/731x based boards.
-
config ARCH_GEMINI
bool "Cortina Systems Gemini"
select CLKSRC_MMIO
0x80020000 | 0xf0020000 | UART8
0x80024000 | 0xf0024000 | UART9
- config DEBUG_AT91_UART
- bool "Kernel low-level debugging on Atmel SoCs"
- depends on ARCH_AT91
+ config DEBUG_AT91_RM9200_DBGU
+ bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+ select DEBUG_AT91_UART
+ depends on SOC_AT91RM9200 || SOC_AT91SAM9
help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on atmel devices.
+ Say Y here if you want kernel low-level debugging support
+ on the DBGU port of:
+ at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+ at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
- SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT
- rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU
- 9261/9g10, 9rl
- 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU
- sama5d4 0xfc00c000 0xfb00c000 USART3
- sama5d4 0xfc069000 0xfb069000 DBGU
- sama5d2 0xf8020000 0xf7020000 UART1
+ config DEBUG_AT91_SAM9263_DBGU
+ bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+ select DEBUG_AT91_UART
+ depends on SOC_AT91SAM9 || SOC_SAMA5D3
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the DBGU port of:
+ at91sam9263, at91sam9g45, at91sam9m10,
+ sama5d3
- Please adjust DEBUG_UART_PHYS configuration options based on
- your needs.
+ config DEBUG_AT91_SAMA5D2_UART1
+ bool "Kernel low-level debugging on SAMA5D2 UART1"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA5D2
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the UART1 port of sama5d2.
+
+ config DEBUG_AT91_SAMA5D4_USART3
+ bool "Kernel low-level debugging on SAMA5D4 USART3"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA5D4
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the USART3 port of sama5d4.
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
select DEBUG_UART_PL01X
config DEBUG_BCM_5301X
- bool "Kernel low-level debugging on BCM5301X UART1"
- depends on ARCH_BCM_5301X
+ bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+ depends on ARCH_BCM_5301X || ARCH_BCM_NSP
select DEBUG_UART_8250
config DEBUG_BCM_KONA_UART
endchoice
+config DEBUG_AT91_UART
+ bool
+ depends on ARCH_AT91
+
config DEBUG_EXYNOS_UART
bool
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
+ default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
default 0xf8b00000 if DEBUG_HIX5HD2_UART
default 0xf991e000 if DEBUG_QCOM_UARTDM
+ default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe800000 if ARCH_IOP32X
default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
default 0xfffe8600 if DEBUG_BCM63XX_UART
+ default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+ default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
default 0xfffff700 if ARCH_IOP33X
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_S3C2410_UART1)
default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
DEBUG_S3C2410_UART2)
+ default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8007000 if DEBUG_HIP04_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+ default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+ default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
default 0xfa71e000 if DEBUG_QCOM_UARTDM
default 0xfb002000 if DEBUG_CNS3XXX
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+ default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfc40ab00 if DEBUG_BRCMSTB_UART
default 0xfc705000 if DEBUG_ZTE_ZX
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
- DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
# Text offset. This list is sorted numerically by address in order to
# provide a means to avoid/resolve conflicts in multi-arch kernels.
textofs-y := 0x00008000
-textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
# We don't want the htc bootloader to corrupt kernel during resume
textofs-$(CONFIG_PM_H1940) := 0x00108000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
*
*/
-#ifdef CONFIG_MMU
-#define AT91_IO_P2V(x) ((x) - 0x01000000)
-#else
-#define AT91_IO_P2V(x) (x)
-#endif
-
-#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
-
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
.macro addruart, rp, rv, tmp
ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address)
- ldr \rv, =AT91_DEBUG_UART_VIRT @ System peripherals (virt address)
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
#ifndef CONFIG_DEBUG_CLPS711X_UART2
#define CLPS711X_UART_PADDR (0x80000000 + 0x0000)
-#define CLPS711X_UART_VADDR (0xfeff0000 + 0x0000)
+#define CLPS711X_UART_VADDR (0xfeff4000 + 0x0000)
#else
#define CLPS711X_UART_PADDR (0x80000000 + 0x1000)
-#define CLPS711X_UART_VADDR (0xfeff0000 + 0x1000)
+#define CLPS711X_UART_VADDR (0xfeff4000 + 0x1000)
#endif
#define SYSFLG (0x0140)
mrc p15, 0, \tmp, c0, c0, 0
and \tmp, \tmp, #0xf0
teq \tmp, #0xf0 @@ A15
- ldreq \rp, =EXYNOS5_PA_UART
+ beq 100f
+ mrc p15, 0, \tmp, c0, c0, 5
+ and \tmp, \tmp, #0xf00
+ teq \tmp, #0x100 @@ A15 + A7 but boot to A7
+100: ldreq \rp, =EXYNOS5_PA_UART
movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
ldr \rv, =S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
.macro fifo_level_s5pv210 rd, rx
ldr \rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
and \rd, \rd, #S5PV210_UFSTAT_TXMASK
.endm
.macro fifo_full_s5pv210 rd, rx
ldr \rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
tst \rd, #S5PV210_UFSTAT_TXFULL
.endm
.macro fifo_level_s3c2440 rd, rx
ldr \rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
and \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
.macro fifo_full_s3c2440 rd, rx
ldr \rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
tst \rd, #S3C2440_UFSTAT_TXFULL
.endm
.macro busyuart, rd, rx
ldr \rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
1001:
@ busy waiting for non fifo
ldr \rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
.macro waituart,rd,rx
ldr \rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
1001:
@ idle waiting for non fifo
ldr \rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/atmel.h>
#include <linux/io.h>
#include <linux/clk/at91_pmc.h>
at91_pm_set_standby(standby);
}
-void at91rm9200_idle(void)
+static void at91rm9200_idle(void)
{
/*
* Disable the processor clock. The processor will be automatically
writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
}
-void at91sam9_idle(void)
+static void at91sam9_idle(void)
{
writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
cpu_do_idle();
Enable support for the BCM21664 family, which includes
BCM21663 and BCM21664 variants.
+config ARCH_BCM_23550
+ bool "Broadcom BCM23550 SoC"
+ depends on ARCH_MULTI_V7
+ select ARCH_BCM_MOBILE
+ select HAVE_SMP
+ help
+ Enable support for the BCM23550.
+
config ARCH_BCM_MOBILE_L2_CACHE
bool "Broadcom mobile SoC level 2 cache support"
- depends on ARCH_BCM_MOBILE
+ depends on ARCH_BCM_281XX || ARCH_BCM_21664
default y
select CACHE_L2X0
select ARCH_BCM_MOBILE_SMC
select HAVE_ARM_SCU
select ARM_ERRATA_764369
help
- SMP support for the BCM281XX and BCM21664 SoC families.
+ SMP support for the BCM281XX, BCM21664 and BCM23550 SoC families.
Provided as an option so SMP support for SoCs of this type
can be disabled for an SMP-enabled kernel.
# BCM21664
obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
-# BCM281XX and BCM21664 SMP support
+# BCM23550
+obj-$(CONFIG_ARCH_BCM_23550) += board_bcm23550.o
+
+# BCM281XX, BCM21664 and BCM23550 SMP support
obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
# BCM281XX and BCM21664 L2 cache control
* GNU General Public License for more details.
*/
-#include <linux/of_address.h>
-#include <linux/io.h>
-
#include <asm/mach/arch.h>
#include "kona_l2_cache.h"
-#define RSTMGR_DT_STRING "brcm,bcm21664-resetmgr"
-
-#define RSTMGR_REG_WR_ACCESS_OFFSET 0
-#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4
-
-#define RSTMGR_WR_PASSWORD 0xa5a5
-#define RSTMGR_WR_PASSWORD_SHIFT 8
-#define RSTMGR_WR_ACCESS_ENABLE 1
-
-static void bcm21664_restart(enum reboot_mode mode, const char *cmd)
-{
- void __iomem *base;
- struct device_node *resetmgr;
-
- resetmgr = of_find_compatible_node(NULL, NULL, RSTMGR_DT_STRING);
- if (!resetmgr) {
- pr_emerg("Couldn't find " RSTMGR_DT_STRING "\n");
- return;
- }
- base = of_iomap(resetmgr, 0);
- if (!base) {
- pr_emerg("Couldn't map " RSTMGR_DT_STRING "\n");
- return;
- }
-
- /*
- * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
- * register. To write to that register we must first write the password
- * and the enable bit in the write access enable register.
- */
- writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
- RSTMGR_WR_ACCESS_ENABLE,
- base + RSTMGR_REG_WR_ACCESS_OFFSET);
- writel(0, base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
-
- /* Wait for reset */
- while (1);
-}
-
static void __init bcm21664_init(void)
{
kona_l2_cache_init();
DT_MACHINE_START(BCM21664_DT, "BCM21664 Broadcom Application Processor")
.init_machine = bcm21664_init,
- .restart = bcm21664_restart,
.dt_compat = bcm21664_dt_compat,
MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+static const char * const bcm23550_dt_compat[] = {
+ "brcm,bcm23550",
+ NULL,
+};
+
+DT_MACHINE_START(BCM23550_DT, "BCM23550 Broadcom Application Processor")
+ .dt_compat = bcm23550_dt_compat,
+MACHINE_END
#include <asm/hardware/cache-l2x0.h>
#include "bcm_kona_smc.h"
+#include "kona_l2_cache.h"
void __init kona_l2_cache_init(void)
{
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/sched.h>
#include <linux/smp.h>
return -ENXIO;
}
+/* Cluster Dormant Control command to bring CPU into a running state */
+#define CDC_CMD 6
+#define CDC_CMD_OFFSET 0
+#define CDC_CMD_REG(cpu) (CDC_CMD_OFFSET + 4*(cpu))
+
+/*
+ * BCM23550 has a Cluster Dormant Control block that keeps the core in
+ * idle state. A command needs to be sent to the block to bring the CPU
+ * into running state.
+ */
+static int bcm23550_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ void __iomem *cdc_base;
+ struct device_node *dn;
+ char *name;
+ int ret;
+
+ /* Make sure a CDC node exists before booting the
+ * secondary core.
+ */
+ name = "brcm,bcm23550-cdc";
+ dn = of_find_compatible_node(NULL, NULL, name);
+ if (!dn) {
+ pr_err("unable to find cdc node\n");
+ return -ENODEV;
+ }
+
+ cdc_base = of_iomap(dn, 0);
+ of_node_put(dn);
+
+ if (!cdc_base) {
+ pr_err("unable to remap cdc base register\n");
+ return -ENOMEM;
+ }
+
+ /* Boot the secondary core */
+ ret = kona_boot_secondary(cpu, idle);
+ if (ret)
+ goto out;
+
+ /* Bring this CPU to RUN state so that nIRQ nFIQ
+ * signals are unblocked.
+ */
+ writel_relaxed(CDC_CMD, cdc_base + CDC_CMD_REG(cpu));
+
+out:
+ iounmap(cdc_base);
+
+ return ret;
+}
+
static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int ret;
CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
&bcm_smp_ops);
+static const struct smp_operations bcm23550_smp_ops __initconst = {
+ .smp_boot_secondary = bcm23550_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm23550, "brcm,bcm23550",
+ &bcm23550_smp_ops);
+
static const struct smp_operations nsp_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
.smp_boot_secondary = nsp_boot_secondary,
-if ARCH_CLPS711X
-
-menu "CLPS711X/EP721X/EP731X Implementations"
-
-config ARCH_AUTCPU12
- bool "AUTCPU12"
- help
- Say Y if you intend to run the kernel on the autronix autcpu12
- board. This board is based on a Cirrus Logic CS89712.
-
-config ARCH_CDB89712
- bool "CDB89712"
- help
- This is an evaluation board from Cirrus for the CS89712 processor.
- The board includes 2 serial ports, Ethernet, IRDA, and expansion
- headers. It comes with 16 MB SDRAM and 8 MB flash ROM.
-
-config ARCH_CLEP7312
- bool "CLEP7312"
- help
- Boards based on the Cirrus Logic 7212/7312 chips.
-
-config ARCH_EDB7211
- bool "EDB7211"
- select ARCH_HAS_HOLES_MEMORYMODEL
- help
- Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
- evaluation board.
-
-config ARCH_P720T
- bool "P720T"
- help
- Say Y here if you intend to run this kernel on the ARM Prospector
- 720T.
-
-endmenu
-
-endif
+menuconfig ARCH_CLPS711X
+ bool "Cirrus Logic EP721x/EP731x-based"
+ depends on ARCH_MULTI_V4T
+ select ARCH_REQUIRE_GPIOLIB
+ select AUTO_ZRELADDR
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_ARM720T
+ select GENERIC_CLOCKEVENTS
+ select MFD_SYSCON
+ select OF_IRQ
+ select USE_OF
+ help
+ Select this if you use ARMv4T Cirrus Logic chips.
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := common.o devices.o
-
-obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o
-obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o
-obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o
-obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o
-obj-$(CONFIG_ARCH_P720T) += board-p720t.o
+obj-y += board-dt.o
-# The standard locations for stuff on CLPS711x type processors
-params_phys-y := 0xc0000100
-# Should probably have some agreement on these...
-initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000
-initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000
--- /dev/null
+/*
+ * Author: Alexander Shiyan <shc_work@mail.ru>, 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/sizes.h>
+
+#include <linux/mfd/syscon/clps711x.h>
+
+#include <asm/system_info.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#define CLPS711X_VIRT_BASE IOMEM(0xfeff4000)
+#define CLPS711X_PHYS_BASE (0x80000000)
+# define SYSFLG1 (0x0140)
+# define HALT (0x0800)
+# define UNIQID (0x2440)
+# define RANDID0 (0x2700)
+# define RANDID1 (0x2704)
+# define RANDID2 (0x2708)
+# define RANDID3 (0x270c)
+
+static struct map_desc clps711x_io_desc __initdata = {
+ .virtual = (unsigned long)CLPS711X_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE),
+ .length = 48 * SZ_1K,
+ .type = MT_DEVICE,
+};
+
+static void __init clps711x_map_io(void)
+{
+ iotable_init(&clps711x_io_desc, 1);
+}
+
+static const struct resource clps711x_cpuidle_res =
+ DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
+
+static void __init clps711x_init(void)
+{
+ u32 id[5];
+
+ id[0] = readl(CLPS711X_VIRT_BASE + UNIQID);
+ id[1] = readl(CLPS711X_VIRT_BASE + RANDID0);
+ id[2] = readl(CLPS711X_VIRT_BASE + RANDID1);
+ id[3] = readl(CLPS711X_VIRT_BASE + RANDID2);
+ id[4] = readl(CLPS711X_VIRT_BASE + RANDID3);
+ system_rev = SYSFLG1_VERID(readl(CLPS711X_VIRT_BASE + SYSFLG1));
+
+ add_device_randomness(id, sizeof(id));
+
+ system_serial_low = id[0];
+
+ platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
+ &clps711x_cpuidle_res, 1);
+}
+
+static void clps711x_restart(enum reboot_mode mode, const char *cmd)
+{
+ soft_restart(0);
+}
+
+static const char *clps711x_compat[] __initconst = {
+ "cirrus,ep7209",
+ NULL
+};
+
+DT_MACHINE_START(CLPS711X_DT, "Cirrus Logic CLPS711X (Device Tree Support)")
+ .dt_compat = clps711x_compat,
+ .map_io = clps711x_map_io,
+ .init_late = clps711x_init,
+ .restart = clps711x_restart,
+MACHINE_END
{
.virtual = (unsigned long)CLPS711X_VIRT_BASE,
.pfn = __phys_to_pfn(CLPS711X_PHYS_BASE),
- .length = SZ_64K,
- .type = MT_DEVICE
+ .length = 48 * SZ_1K,
+ .type = MT_DEVICE,
}
};
+++ /dev/null
-/*
- * This file contains the hardware definitions of the Cirrus Logic
- * ARM7 CLPS711X internal registers.
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __MACH_CLPS711X_H
-#define __MACH_CLPS711X_H
-
-#include <linux/mfd/syscon/clps711x.h>
-
-#define CLPS711X_PHYS_BASE (0x80000000)
-
-#define PADR (0x0000)
-#define PBDR (0x0001)
-#define PCDR (0x0002)
-#define PDDR (0x0003)
-#define PADDR (0x0040)
-#define PBDDR (0x0041)
-#define PCDDR (0x0042)
-#define PDDDR (0x0043)
-#define PEDR (0x0083)
-#define PEDDR (0x00c3)
-#define SYSCON1 (0x0100)
-#define SYSFLG1 (0x0140)
-#define MEMCFG1 (0x0180)
-#define MEMCFG2 (0x01c0)
-#define DRFPR (0x0200)
-#define LCDCON (0x02c0)
-#define TC1D (0x0300)
-#define TC2D (0x0340)
-#define RTCDR (0x0380)
-#define RTCMR (0x03c0)
-#define PMPCON (0x0400)
-#define CODR (0x0440)
-#define UARTDR1 (0x0480)
-#define UBRLCR1 (0x04c0)
-#define SYNCIO (0x0500)
-#define PALLSW (0x0540)
-#define PALMSW (0x0580)
-#define STFCLR (0x05c0)
-#define HALT (0x0800)
-#define STDBY (0x0840)
-
-#define FBADDR (0x1000)
-#define SYSCON2 (0x1100)
-#define SYSFLG2 (0x1140)
-#define UARTDR2 (0x1480)
-#define UBRLCR2 (0x14c0)
-#define SS2DR (0x1500)
-#define SS2POP (0x16c0)
-
-#define DAIR (0x2000)
-#define DAIDR0 (0x2040)
-#define DAIDR1 (0x2080)
-#define DAIDR2 (0x20c0)
-#define DAISR (0x2100)
-#define SYSCON3 (0x2200)
-#define LEDFLSH (0x22c0)
-#define SDCONF (0x2300)
-#define SDRFPR (0x2340)
-#define UNIQID (0x2440)
-#define DAI64FS (0x2600)
-#define PLLW (0x2610)
-#define PLLR (0xa5a8)
-#define RANDID0 (0x2700)
-#define RANDID1 (0x2704)
-#define RANDID2 (0x2708)
-#define RANDID3 (0x270c)
-
-#define LCDCON_GSEN (1 << 30)
-#define LCDCON_GSMD (1 << 31)
-
-/* common bits: UARTDR1 / UARTDR2 */
-#define UARTDR_FRMERR (1 << 8)
-#define UARTDR_PARERR (1 << 9)
-#define UARTDR_OVERR (1 << 10)
-
-/* common bits: UBRLCR1 / UBRLCR2 */
-#define UBRLCR_BAUD_MASK ((1 << 12) - 1)
-#define UBRLCR_BREAK (1 << 12)
-#define UBRLCR_PRTEN (1 << 13)
-#define UBRLCR_EVENPRT (1 << 14)
-#define UBRLCR_XSTOP (1 << 15)
-#define UBRLCR_FIFOEN (1 << 16)
-#define UBRLCR_WRDLEN5 (0 << 17)
-#define UBRLCR_WRDLEN6 (1 << 17)
-#define UBRLCR_WRDLEN7 (2 << 17)
-#define UBRLCR_WRDLEN8 (3 << 17)
-#define UBRLCR_WRDLEN_MASK (3 << 17)
-
-#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8)
-#define SYNCIO_SMCKEN (1 << 13)
-#define SYNCIO_TXFRMEN (1 << 14)
-
-#define DAIR_RESERVED (0x0404)
-#define DAIR_DAIEN (1 << 16)
-#define DAIR_ECS (1 << 17)
-#define DAIR_LCTM (1 << 19)
-#define DAIR_LCRM (1 << 20)
-#define DAIR_RCTM (1 << 21)
-#define DAIR_RCRM (1 << 22)
-#define DAIR_LBM (1 << 23)
-
-#define DAIDR2_FIFOEN (1 << 15)
-#define DAIDR2_FIFOLEFT (0x0d << 16)
-#define DAIDR2_FIFORIGHT (0x11 << 16)
-
-#define DAISR_RCTS (1 << 0)
-#define DAISR_RCRS (1 << 1)
-#define DAISR_LCTS (1 << 2)
-#define DAISR_LCRS (1 << 3)
-#define DAISR_RCTU (1 << 4)
-#define DAISR_RCRO (1 << 5)
-#define DAISR_LCTU (1 << 6)
-#define DAISR_LCRO (1 << 7)
-#define DAISR_RCNF (1 << 8)
-#define DAISR_RCNE (1 << 9)
-#define DAISR_LCNF (1 << 10)
-#define DAISR_LCNE (1 << 11)
-#define DAISR_FIFO (1 << 12)
-
-#define DAI64FS_I2SF64 (1 << 0)
-#define DAI64FS_AUDIOCLKEN (1 << 1)
-#define DAI64FS_AUDIOCLKSRC (1 << 2)
-#define DAI64FS_MCLK256EN (1 << 3)
-#define DAI64FS_LOOPBACK (1 << 5)
-
-#define SDCONF_ACTIVE (1 << 10)
-#define SDCONF_CLKCTL (1 << 9)
-#define SDCONF_WIDTH_4 (0 << 7)
-#define SDCONF_WIDTH_8 (1 << 7)
-#define SDCONF_WIDTH_16 (2 << 7)
-#define SDCONF_WIDTH_32 (3 << 7)
-#define SDCONF_SIZE_16 (0 << 5)
-#define SDCONF_SIZE_64 (1 << 5)
-#define SDCONF_SIZE_128 (2 << 5)
-#define SDCONF_SIZE_256 (3 << 5)
-#define SDCONF_CASLAT_2 (2)
-#define SDCONF_CASLAT_3 (3)
-
-#define MEMCFG_BUS_WIDTH_32 (1)
-#define MEMCFG_BUS_WIDTH_16 (0)
-#define MEMCFG_BUS_WIDTH_8 (3)
-
-#define MEMCFG_SQAEN (1 << 6)
-#define MEMCFG_CLKENB (1 << 7)
-
-#define MEMCFG_WAITSTATE_8_3 (0 << 2)
-#define MEMCFG_WAITSTATE_7_3 (1 << 2)
-#define MEMCFG_WAITSTATE_6_3 (2 << 2)
-#define MEMCFG_WAITSTATE_5_3 (3 << 2)
-#define MEMCFG_WAITSTATE_4_2 (4 << 2)
-#define MEMCFG_WAITSTATE_3_2 (5 << 2)
-#define MEMCFG_WAITSTATE_2_2 (6 << 2)
-#define MEMCFG_WAITSTATE_1_2 (7 << 2)
-#define MEMCFG_WAITSTATE_8_1 (8 << 2)
-#define MEMCFG_WAITSTATE_7_1 (9 << 2)
-#define MEMCFG_WAITSTATE_6_1 (10 << 2)
-#define MEMCFG_WAITSTATE_5_1 (11 << 2)
-#define MEMCFG_WAITSTATE_4_0 (12 << 2)
-#define MEMCFG_WAITSTATE_3_0 (13 << 2)
-#define MEMCFG_WAITSTATE_2_0 (14 << 2)
-#define MEMCFG_WAITSTATE_1_0 (15 << 2)
-
-/* INTSR1 Interrupts */
-#define IRQ_CSINT (4)
-#define IRQ_EINT1 (5)
-#define IRQ_EINT2 (6)
-#define IRQ_EINT3 (7)
-#define IRQ_TC1OI (8)
-#define IRQ_TC2OI (9)
-#define IRQ_RTCMI (10)
-#define IRQ_TINT (11)
-#define IRQ_UTXINT1 (12)
-#define IRQ_URXINT1 (13)
-#define IRQ_UMSINT (14)
-#define IRQ_SSEOTI (15)
-
-/* INTSR2 Interrupts */
-#define IRQ_KBDINT (16 + 0)
-#define IRQ_SS2RX (16 + 1)
-#define IRQ_SS2TX (16 + 2)
-#define IRQ_UTXINT2 (16 + 12)
-#define IRQ_URXINT2 (16 + 13)
-
-/* INTSR3 Interrupts */
-#define IRQ_DAIINT (32 + 0)
-
-#endif /* __MACH_CLPS711X_H */
+++ /dev/null
-/*
- * arch/arm/mach-clps711x/include/mach/hardware.h
- *
- * This file contains the hardware definitions of the Prospector P720T.
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <mach/clps711x.h>
-
-#define CLPS711X_VIRT_BASE IOMEM(0xfeff0000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off))
-#define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off))
-#define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off))
-#define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off))
-#define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off))
-#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off))
-#endif
-
-#define CS0_PHYS_BASE (0x00000000)
-#define CS1_PHYS_BASE (0x10000000)
-#define CS2_PHYS_BASE (0x20000000)
-#define CS3_PHYS_BASE (0x30000000)
-#define CS4_PHYS_BASE (0x40000000)
-#define CS5_PHYS_BASE (0x50000000)
-#define CS6_PHYS_BASE (0x60000000)
-#define CS7_PHYS_BASE (0x70000000)
-
-#define CLPS711X_SRAM_BASE CS6_PHYS_BASE
-#define CLPS711X_SRAM_SIZE (48 * 1024)
-
-#define CLPS711X_SDRAM0_BASE (0xc0000000)
-#define CLPS711X_SDRAM1_BASE (0xd0000000)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-clps711x/include/mach/uncompress.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <mach/clps711x.h>
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx SYSFLG2
-#define UARTDRx UARTDR2
-#else
-#define SYSFLGx SYSFLG1
-#define UARTDRx UARTDR1
-#endif
-
-#define phys_reg(x) (*(volatile u32 *)(CLPS711X_PHYS_BASE + (x)))
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- while (phys_reg(SYSFLGx) & SYSFLG_UTXFF)
- barrier();
- phys_reg(UARTDRx) = c;
-}
-
-static inline void flush(void)
-{
- while (phys_reg(SYSFLGx) & SYSFLG_UBUSY)
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
.scl_pin = 14,
};
-static struct snd_platform_data dm355_evm_snd_data;
-
static int dm355evm_mmc_gpios = -EINVAL;
static void dm355evm_mmcsd_gpios(unsigned gpio)
ARRAY_SIZE(dm355_evm_spi_info));
/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
- dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
+ dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
}
MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
.context = (void *)0x7f00,
};
-static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
- .asp_chan_q = EVENTQ_3,
-};
-
static struct i2c_board_info i2c_info[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
evm_init_cpld();
#ifdef CONFIG_SND_DM365_AIC3X_CODEC
- dm365_init_asp(&dm365_evm_snd_data);
+ dm365_init_asp();
#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
- dm365_init_vc(&dm365_evm_snd_data);
+ dm365_init_vc();
#endif
dm365_init_rtc();
dm365_init_ks(&dm365evm_ks_data);
.id = -1,
};
-static struct snd_platform_data dm644x_evm_snd_data;
-
/*----------------------------------------------------------------------*/
#ifdef CONFIG_I2C
/*
dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
davinci_serial_init(dm644x_serial_device);
- dm644x_init_asp(&dm644x_evm_snd_data);
+ dm644x_init_asp();
/* irlml6401 switches over 1A, in under 8 msec */
davinci_setup_usb(1000, 8);
.num_resources = 0,
};
-static struct snd_platform_data dm644x_ntosd2_snd_data;
-
static struct gpio_led ntosd2_leds[] = {
{ .name = "led1_green", .gpio = GPIO(10), },
{ .name = "led1_red", .gpio = GPIO(11), },
ARRAY_SIZE(davinci_ntosd2_devices));
davinci_serial_init(dm644x_serial_device);
- dm644x_init_asp(&dm644x_ntosd2_snd_data);
+ dm644x_init_asp();
soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
.gpsc = 1,
};
+static struct clk mcbsp0_clk = {
+ .name = "mcbsp0",
+ .parent = &async3_clk,
+ .lpsc = DA850_LPSC1_McBSP0,
+ .gpsc = 1,
+};
+
+static struct clk mcbsp1_clk = {
+ .name = "mcbsp1",
+ .parent = &async3_clk,
+ .lpsc = DA850_LPSC1_McBSP1,
+ .gpsc = 1,
+};
+
static struct clk lcdc_clk = {
.name = "lcdc",
.parent = &pll0_sysclk2,
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("davinci_mdio.0", "fck", &emac_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
+ CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk),
+ CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk),
CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
void dm355_init(void);
void dm355_init_spi0(unsigned chipselect_mask,
const struct spi_board_info *info, unsigned len);
-void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_init_asp1(u32 evt_enable);
int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
int dm355_gpio_register(void);
/* DM365 function declarations */
void dm365_init(void);
-void dm365_init_asp(struct snd_platform_data *pdata);
-void dm365_init_vc(struct snd_platform_data *pdata);
+void dm365_init_asp(void);
+void dm365_init_vc(void);
void dm365_init_ks(struct davinci_ks_platform_data *pdata);
void dm365_init_rtc(void);
void dm365_init_spi0(unsigned chipselect_mask,
/* DM644x function declarations */
void dm644x_init(void);
-void dm644x_init_asp(struct snd_platform_data *pdata);
+void dm644x_init_asp(void);
int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
int dm644x_gpio_register(void);
.sram_len = SZ_32K,
};
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
+void __init dm355_init_asp1(u32 evt_enable)
{
/* we don't use ASP1 IRQs, or we'd need to mux them ... */
if (evt_enable & ASP1_TX_EVT_EN)
if (evt_enable & ASP1_RX_EVT_EN)
davinci_cfg_reg(DM355_EVT9_ASP1_RX);
- dm355_asp1_device.dev.platform_data = pdata;
platform_device_register(&dm355_asp1_device);
}
.sram_len = SZ_32K,
};
-void __init dm365_init_asp(struct snd_platform_data *pdata)
+void __init dm365_init_asp(void)
{
davinci_cfg_reg(DM365_MCBSP0_BDX);
davinci_cfg_reg(DM365_MCBSP0_X);
davinci_cfg_reg(DM365_MCBSP0_BFSR);
davinci_cfg_reg(DM365_EVT2_ASP_TX);
davinci_cfg_reg(DM365_EVT3_ASP_RX);
- dm365_asp_device.dev.platform_data = pdata;
platform_device_register(&dm365_asp_device);
}
-void __init dm365_init_vc(struct snd_platform_data *pdata)
+void __init dm365_init_vc(void)
{
davinci_cfg_reg(DM365_EVT2_VC_TX);
davinci_cfg_reg(DM365_EVT3_VC_RX);
- dm365_vc_device.dev.platform_data = pdata;
platform_device_register(&dm365_vc_device);
}
.sram_len = SZ_16K,
};
-void __init dm644x_init_asp(struct snd_platform_data *pdata)
+void __init dm644x_init_asp(void)
{
davinci_cfg_reg(DM644X_MCBSP);
- dm644x_asp_device.dev.platform_data = pdata;
platform_device_register(&dm644x_asp_device);
}
#define DA8XX_LPSC1_I2C 11
#define DA8XX_LPSC1_UART1 12
#define DA8XX_LPSC1_UART2 13
+#define DA850_LPSC1_McBSP0 14
+#define DA850_LPSC1_McBSP1 15
#define DA8XX_LPSC1_LCDC 16
#define DA8XX_LPSC1_PWM 17
#define DA850_LPSC1_MMC_SD1 18
extern void exynos_set_delayed_reset_assertion(bool enable);
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
extern void exynos_core_restart(u32 core_id);
extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
static inline void pmu_raw_writel(u32 val, u32 offset)
{
- __raw_writel(val, pmu_base_addr + offset);
+ writel_relaxed(val, pmu_base_addr + offset);
}
static inline u32 pmu_raw_readl(u32 offset)
{
- return __raw_readl(pmu_base_addr + offset);
+ return readl_relaxed(pmu_base_addr + offset);
}
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
#include <asm/mach/map.h>
#include <mach/map.h>
+#include <plat/cpu.h>
#include "common.h"
#include "mfc.h"
case FW_DO_IDLE_AFTR:
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_save_cp15();
- __raw_writel(virt_to_phys(exynos_cpu_resume_ns),
- sysram_ns_base_addr + 0x24);
- __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
+ writel_relaxed(virt_to_phys(exynos_cpu_resume_ns),
+ sysram_ns_base_addr + 0x24);
+ writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
if (soc_is_exynos3250()) {
flush_cache_all();
exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
- __raw_writel(boot_addr, boot_reg);
+ writel_relaxed(boot_addr, boot_reg);
return 0;
}
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
- *boot_addr = __raw_readl(boot_reg);
+ *boot_addr = readl_relaxed(boot_reg);
return 0;
}
{
unsigned int tmp;
- tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+ tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
if (mode & BOOT_MODE_MASK)
tmp &= ~BOOT_MODE_MASK;
tmp |= mode;
- __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+ writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
}
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
{
unsigned int tmp;
- tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+ tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
tmp &= ~mode;
- __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+ writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
}
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/assembler.h>
+
/*
* exynos4 specific entry point for secondary CPUs. This provides
* a "holding pen" into which all secondary cores are held until we're
* ready for them to initialise.
*/
ENTRY(exynos4_secondary_startup)
+ARM_BE8(setend be)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
ret = PTR_ERR(boot_reg);
goto fail;
}
- __raw_writel(boot_addr, boot_reg);
+ writel_relaxed(boot_addr, boot_reg);
ret = 0;
}
fail:
ret = PTR_ERR(boot_reg);
goto fail;
}
- *boot_addr = __raw_readl(boot_reg);
+ *boot_addr = readl_relaxed(boot_reg);
ret = 0;
}
fail:
static void exynos_cpu_set_boot_vector(long flags)
{
- __raw_writel(virt_to_phys(exynos_cpu_resume),
- exynos_boot_vector_addr());
- __raw_writel(flags, exynos_boot_vector_flag());
+ writel_relaxed(virt_to_phys(exynos_cpu_resume),
+ exynos_boot_vector_addr());
+ writel_relaxed(flags, exynos_boot_vector_flag());
}
static int exynos_aftr_finisher(unsigned long flags)
}
pwr = power_on ? INT_LOCAL_PWR_EN : 0;
- __raw_writel(pwr, base);
+ writel_relaxed(pwr, base);
/* Wait max 1ms */
timeout = 10;
- while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
+ while ((readl_relaxed(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
if (!timeout) {
op = (power_on) ? "enable" : "disable";
pr_err("Power domain %s %s failed\n", domain->name, op);
clk_put(pd->oscclk);
no_clk:
- on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
+ on = readl_relaxed(pd->base + 0x4) & INT_LOCAL_PWR_EN;
pm_genpd_init(&pd->pd, NULL, !on);
of_genpd_add_provider_simple(np, &pd->pd);
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- __raw_writel(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
* needs to restore it back in case, the primary cpu fails to
* suspend for any reason.
*/
- exynos5420_cpu_state = __raw_readl(sysram_base_addr +
- EXYNOS5420_CPU_STATE);
+ exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
+ EXYNOS5420_CPU_STATE);
exynos_pm_enter_sleep_mode();
/* Restore the CPU0 low power state register */
tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
- EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+ EXYNOS5_ARM_CORE0_SYS_PWR_REG);
/* Restore the sysram cpu state register */
- __raw_writel(exynos5420_cpu_state,
- sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(exynos5420_cpu_state,
+ sysram_base_addr + EXYNOS5420_CPU_STATE);
pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
S5P_CENTRAL_SEQ_OPTION);
.map_io = hi3620_map_io,
.dt_compat = hi3xxx_compat,
MACHINE_END
-
-static const char *const hix5hd2_compat[] __initconst = {
- "hisilicon,hix5hd2",
- NULL,
-};
-
-DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
- .dt_compat = hix5hd2_compat,
-MACHINE_END
-
-static const char *const hip04_compat[] __initconst = {
- "hisilicon,hip04-d01",
- NULL,
-};
-
-DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
- .dt_compat = hip04_compat,
-MACHINE_END
-
-static const char *const hip01_compat[] __initconst = {
- "hisilicon,hip01",
- "hisilicon,hip01-ca9x2",
- NULL,
-};
-
-DT_MACHINE_START(HIP01, "Hisilicon HIP01 (Flattened Device Tree)")
- .dt_compat = hip01_compat,
-MACHINE_END
hisi_enable_scu_a9();
}
-void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
+static void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
{
void __iomem *virt;
#define HIP01_BOOT_ADDRESS 0x80000000
#define REG_SC_CTRL 0x000
-void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
+static void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
{
void __iomem *virt;
static struct irq_domain *domain;
#ifdef CONFIG_FIQ
-static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
+static int avic_set_irq_fiq(unsigned int hwirq, unsigned int type)
{
- struct irq_data *d = irq_get_irq_data(irq);
unsigned int irqt;
- irq = d->hwirq;
-
- if (irq >= AVIC_NUM_IRQS)
+ if (hwirq >= AVIC_NUM_IRQS)
return -EINVAL;
- if (irq < AVIC_NUM_IRQS / 2) {
- irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
- imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
+ if (hwirq < AVIC_NUM_IRQS / 2) {
+ irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << hwirq);
+ imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEL);
} else {
- irq -= AVIC_NUM_IRQS / 2;
- irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
- imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
+ hwirq -= AVIC_NUM_IRQS / 2;
+ irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << hwirq);
+ imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEH);
}
return 0;
#include <linux/module.h>
#include <asm/cpuidle.h>
+#include <soc/imx/cpuidle.h>
+
#include "common.h"
#include "cpuidle.h"
#include "hardware.h"
.safe_state_index = 0,
};
+/*
+ * i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the
+ * CPUs when they are in wait(unclocked) state. As the hardware workaround isn't
+ * applicable to all boards, disable the deeper idle state when the workaround
+ * isn't present and the FEC is in use.
+ */
+void imx6q_cpuidle_fec_irqs_used(void)
+{
+ imx6q_cpuidle_driver.states[1].disabled = true;
+}
+EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_used);
+
+void imx6q_cpuidle_fec_irqs_unused(void)
+{
+ imx6q_cpuidle_driver.states[1].disabled = false;
+}
+EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused);
+
int __init imx6q_cpuidle_init(void)
{
/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
#include <linux/err.h>
#include <linux/platform_device.h>
+#include "../common.h"
+#include "devices-common.h"
+
struct device mxc_aips_bus = {
.init_name = "mxc_aips",
};
* Free Software Foundation.
*/
#include "devices-common.h"
+#include "../common.h"
struct platform_device *__init mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
gc = irq_get_chip_data(irq);
if (gc && gc->private) {
exirq = gc->private;
- if (exirq->set_irq_fiq)
- ret = exirq->set_irq_fiq(irq, type);
+ if (exirq->set_irq_fiq) {
+ struct irq_data *d = irq_get_irq_data(irq);
+ ret = exirq->set_irq_fiq(irqd_to_hwirq(d), type);
+ }
}
return ret;
{
imx51_ipu_mipi_setup();
imx_src_init();
+
+ imx_aips_allow_unprivileged_access("fsl,imx51-aipstz");
}
static void __init imx51_init_late(void)
IMX6Q_GPR1_ENET_CLK_SEL_MASK,
clksel);
else
- pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
+ pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
clk_put(enet_ref);
put_ptp_clk:
static const char *const imx7d_dt_compat[] __initconst = {
"fsl,imx7d",
+ "fsl,imx7s",
NULL,
};
#define TZIC_NUM_IRQS 128
#ifdef CONFIG_FIQ
-static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
+static int tzic_set_irq_fiq(unsigned int hwirq, unsigned int type)
{
unsigned int index, mask, value;
- index = irq >> 5;
+ index = hwirq >> 5;
if (unlikely(index >= 4))
return -EINVAL;
- mask = 1U << (irq & 0x1F);
+ mask = 1U << (hwirq & 0x1F);
value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
if (type)
#include <linux/platform_device.h>
#include <linux/of.h>
+#include "keystone.h"
+
static struct dev_pm_domain keystone_pm_domain = {
.ops = {
USE_PM_CLK_RUNTIME_OPS
select CACHE_L2X0
select PINCTRL
select PINCTRL_MESON
+ select COMMON_CLK
+ select COMMON_CLK_AMLOGIC
if ARCH_MESON
bool "Amlogic Meson8b SoCs support"
default ARCH_MESON
select MESON6_TIMER
+ select COMMON_CLK_MESON8B
endif
fiq_buffer[i] = 0;
/*
- * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+ * FIQ mode r9 always points to the fiq_buffer, because the FIQ isr
* will run in an unpredictable context. The fiq_buffer is the FIQ isr's
* only means of communication with the IRQ level and other kernel
* context code.
#define xip_currtime() (~xip_omap_mpu_timer_read(0))
/*
- * It's permitted to do approxmation for xip_elapsed_since macro
+ * It's permitted to do approximation for xip_elapsed_since macro
* (see linux/mtd/xip.h)
*/
# Common support
obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
- omap_device.o sram.o drm.o
+ omap_device.o omap-headsmp.o sram.o drm.o
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
# SMP support ONLY available for OMAP4
-smp-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
+smp-$(CONFIG_SMP) += omap-smp.o
smp-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
omap-4-5-common = omap4-common.o omap-wakeupgen.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) sleep44xx.o
endif
# Power Management
+omap-4-5-pm-common = omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
+obj-$(CONFIG_ARCH_OMAP5) += $(omap-4-5-pm-common)
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
-omap-4-5-pm-common = pm44xx.o omap-mpuss-lowpower.o
+omap-4-5-pm-common += pm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common)
obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-pm-common)
#include "gpmc.h"
#include "gpmc-smsc911x.h"
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
#include <video/omap-panel-data.h>
#include "board-flash.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
+#include "display.h"
#define LDP_SMSC911X_CS 1
#define LDP_SMSC911X_GPIO 152
#include <linux/spi/spi.h>
#include <linux/mm.h>
#include <asm/mach-types.h>
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
#include <video/omap-panel-data.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "soc.h"
#include "board-rx51.h"
+#include "display.h"
#include "mux.h"
static struct connector_atv_platform_data rx51_tv_pdata = {
.name = "tv",
.source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
.invert_polarity = false,
};
return -EACCES;
list_for_each_entry(clkdm, &clkdm_list, node) {
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- clkdm_wakeup(clkdm);
- else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
- clkdm_deny_idle(clkdm);
+ clkdm_deny_idle(clkdm);
_resolve_clkdm_deps(clkdm, clkdm->wkdep_srcs);
clkdm_clear_all_wkdeps(clkdm);
if (!clkdm)
return;
- if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
- pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
- clkdm->name);
+ if (!WARN_ON(!clkdm->forcewake_count))
+ clkdm->forcewake_count--;
+
+ if (clkdm->forcewake_count)
+ return;
+
+ if (!clkdm->usecount && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ clkdm_sleep_nolock(clkdm);
+
+ if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO))
+ return;
+
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)
return;
- }
if (!arch_clkdm || !arch_clkdm->clkdm_allow_idle)
return;
if (!clkdm)
return;
- if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
- pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
- clkdm->name);
+ if (clkdm->forcewake_count++)
+ return;
+
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ clkdm_wakeup_nolock(clkdm);
+
+ if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO))
+ return;
+
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)
return;
- }
if (!arch_clkdm || !arch_clkdm->clkdm_deny_idle)
return;
* @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
* @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
* @usecount: Usecount tracking
+ * @forcewake_count: Usecount for forcing the domain active
* @node: list_head to link all clockdomains together
*
* @prcm_partition should be a macro from mach-omap2/prcm44xx.h (OMAP4 only)
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
int usecount;
+ int forcewake_count;
struct list_head node;
};
{
int i = 0;
+ if (!clkctrl_offs)
+ return 0;
+
omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
/*
* As per erratum i671, ROM code does not respect the PER DPLL
* programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
- * Then, in anycase, clear these bits to avoid extra latencies.
+ * Then, in any case, clear these bits to avoid extra latencies.
*/
*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
~OMAP3430_AUTO_PERIPH_DPLL_MASK;
extern bool gic_dist_disabled(void);
extern void gic_timer_retrigger(void);
extern void omap_smc1(u32 fn, u32 arg);
+extern void omap4_sar_ram_init(void);
extern void __iomem *omap4_get_sar_ram_base(void);
+extern void omap4_mpuss_early_init(void);
extern void omap_do_wfi(void);
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
extern void omap4_secondary_startup(void);
extern void omap4460_secondary_startup(void);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
extern void omap4_cpu_die(unsigned int cpu);
+extern int omap4_cpu_kill(unsigned int cpu);
extern const struct smp_operations omap4_smp_ops;
mpuss_can_lose_context)
gic_dist_disable();
- clkdm_wakeup(cpu_clkdm[1]);
+ clkdm_deny_idle(cpu_clkdm[1]);
omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
clkdm_allow_idle(cpu_clkdm[1]);
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
#include "omap_hwmod.h"
#include "omap_device.h"
#include "omap-pm.h"
struct device_node * __init omapdss_find_dss_of_node(void);
+struct omap_dss_board_info;
+
+/* Init with the board info */
+int omap_display_init(struct omap_dss_board_info *board_data);
+
#endif
#include <linux/gpio.h>
#include <linux/platform_device.h>
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
#include <video/omap-panel-data.h>
#include "soc.h"
omap4xxx_check_revision();
omap4xxx_check_features();
omap2_prcm_base_init();
+ omap4_sar_ram_init();
+ omap4_mpuss_early_init();
omap4_pm_init_early();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap4_pm_init_early();
omap2_prcm_base_init();
omap5xxx_check_revision();
+ omap4_sar_ram_init();
omap54xx_voltagedomains_init();
omap54xx_powerdomains_init();
omap54xx_clockdomains_init();
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
-static struct clk *mcbsp_iclks[5];
-
-static int omap3_enable_st_clock(unsigned int id, bool enable)
+static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
{
- /*
- * Sidetone uses McBSP ICLK - which must not idle when sidetones
- * are enabled or sidetones start sounding ugly.
- */
- if (enable)
- return omap2_clk_deny_idle(mcbsp_iclks[id]);
+ if (!clk)
+ return 0;
+
+ if (force_on)
+ return omap2_clk_deny_idle(clk);
else
- return omap2_clk_allow_idle(mcbsp_iclks[id]);
+ return omap2_clk_allow_idle(clk);
+}
+
+void __init omap3_mcbsp_init_pdata_callback(
+ struct omap_mcbsp_platform_data *pdata)
+{
+ if (!pdata)
+ return;
+
+ pdata->force_ick_on = omap3_mcbsp_force_ick_on;
}
static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
struct omap_hwmod *oh_device[2];
struct omap_mcbsp_platform_data *pdata = NULL;
struct platform_device *pdev;
- char clk_name[11];
sscanf(oh->name, "mcbsp%d", &id);
if (oh->dev_attr) {
oh_device[1] = omap_hwmod_lookup((
(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
- pdata->enable_st_clock = omap3_enable_st_clock;
- sprintf(clk_name, "mcbsp%d_ick", id);
- mcbsp_iclks[id] = clk_get(NULL, clk_name);
+ pdata->force_ick_on = omap3_mcbsp_force_ick_on;
count++;
}
pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
#endif
/*
- * Signals different on CBB package comapared to superset
+ * Signals different on CBB package compared to superset
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
static struct omap_mux __initdata omap3_cbb_subset[] = {
#endif
/*
- * Signals different on 36XX CBP package comapared to 34XX CBC package
+ * Signals different on 36XX CBP package compared to 34XX CBC package
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
static struct omap_mux __initdata omap36xx_cbp_subset[] = {
#define AUX_CORE_BOOT0_PA 0x48281800
#define API_HYP_ENTRY 0x102
+ENTRY(omap_secondary_startup)
+#ifdef CONFIG_SMP
+ b secondary_startup
+#else
+/* Should never get here */
+again: wfi
+ b again
+#endif
+#ENDPROC(omap_secondary_startup)
+
/*
* OMAP5 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
and r4, r4, #0x0f
cmp r0, r4
bne wait
- b secondary_startup
+ b omap_secondary_startup
ENDPROC(omap5_secondary_startup)
/*
* Same as omap5_secondary_startup except we call into the ROM to
adr r0, hyp_boot
smc #0
hyp_boot:
- b secondary_startup
+ b omap_secondary_startup
ENDPROC(omap5_secondary_hyp_startup)
/*
* OMAP4 specific entry point for secondary CPU to jump from ROM
* we've been released from the wait loop,secondary_stack
* should now contain the SVC stack for this core
*/
- b secondary_startup
+ b omap_secondary_startup
ENDPROC(omap4_secondary_startup)
ENTRY(omap4460_secondary_startup)
* we've been released from the wait loop,secondary_stack
* should now contain the SVC stack for this core
*/
- b secondary_startup
+ b omap_secondary_startup
ENDPROC(omap4460_secondary_startup)
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
+
+/* Needed by kexec and platform_can_cpu_hotplug() */
+int omap4_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
-#ifdef CONFIG_SMP
+static void __iomem *sar_base;
+
+#if defined(CONFIG_PM) && defined(CONFIG_SMP)
struct omap4_cpu_pm_info {
struct powerdomain *pwrdm;
static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
static struct powerdomain *mpuss_pd;
-static void __iomem *sar_base;
static u32 cpu_context_offset;
static int default_finish_suspend(unsigned long cpu_state)
return -ENODEV;
}
- if (cpu_is_omap44xx())
- sar_base = omap4_get_sar_ram_base();
-
/* Initilaise per CPU PM information */
pm_info = &per_cpu(omap4_pm_info, 0x0);
if (sar_base) {
}
#endif
+
+/*
+ * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to
+ * current kernel's secondary_startup() early before
+ * clockdomains_init(). Otherwise clockdomain_init() can
+ * wake CPU1 and cause a hang.
+ */
+void __init omap4_mpuss_early_init(void)
+{
+ unsigned long startup_pa;
+
+ if (!cpu_is_omap44xx())
+ return;
+
+ sar_base = omap4_get_sar_ram_base();
+
+ if (cpu_is_omap443x())
+ startup_pa = virt_to_phys(omap4_secondary_startup);
+ else
+ startup_pa = virt_to_phys(omap4460_secondary_startup);
+
+ writel_relaxed(startup_pa, sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
+}
#define OMAP5_CORE_COUNT 0x2
-/* SCU base address */
-static void __iomem *scu_base;
+struct omap_smp_config {
+ unsigned long cpu1_rstctrl_pa;
+ void __iomem *cpu1_rstctrl_va;
+ void __iomem *scu_base;
+ void *startup_addr;
+};
+
+static struct omap_smp_config cfg;
+
+static const struct omap_smp_config omap443x_cfg __initconst = {
+ .cpu1_rstctrl_pa = 0x4824380c,
+ .startup_addr = omap4_secondary_startup,
+};
+
+static const struct omap_smp_config omap446x_cfg __initconst = {
+ .cpu1_rstctrl_pa = 0x4824380c,
+ .startup_addr = omap4460_secondary_startup,
+};
+
+static const struct omap_smp_config omap5_cfg __initconst = {
+ .cpu1_rstctrl_pa = 0x48243810,
+ .startup_addr = omap5_secondary_startup,
+};
static DEFINE_SPINLOCK(boot_lock);
void __iomem *omap4_get_scu_base(void)
{
- return scu_base;
+ return cfg.scu_base;
}
#ifdef CONFIG_OMAP5_ERRATA_801819
* OMAP443X GP devices- SMP bit isn't accessible.
* OMAP446X GP devices - SMP bit access is enabled on both CPUs.
*/
- if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+ if (soc_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
4, 0, 0, 0, 0, 0);
* Ensure that CPU power state is set to ON to avoid CPU
* powerdomain transition on wfi
*/
- clkdm_wakeup_nolock(cpu1_clkdm);
+ clkdm_deny_idle_nolock(cpu1_clkdm);
pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
clkdm_allow_idle_nolock(cpu1_clkdm);
* Currently we can't call ioremap here because
* SoC detection won't work until after init_early.
*/
- scu_base = OMAP2_L4_IO_ADDRESS(scu_a9_get_base());
- BUG_ON(!scu_base);
- ncores = scu_get_core_count(scu_base);
+ cfg.scu_base = OMAP2_L4_IO_ADDRESS(scu_a9_get_base());
+ BUG_ON(!cfg.scu_base);
+ ncores = scu_get_core_count(cfg.scu_base);
} else if (cpu_id == CPU_CORTEX_A15) {
ncores = OMAP5_CORE_COUNT;
}
static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
- void *startup_addr = omap4_secondary_startup;
void __iomem *base = omap_get_wakeupgen_base();
+ const struct omap_smp_config *c = NULL;
+
+ if (soc_is_omap443x())
+ c = &omap443x_cfg;
+ else if (soc_is_omap446x())
+ c = &omap446x_cfg;
+ else if (soc_is_dra74x() || soc_is_omap54xx())
+ c = &omap5_cfg;
+
+ if (!c) {
+ pr_err("%s Unknown SMP SoC?\n", __func__);
+ return;
+ }
+
+ /* Must preserve cfg.scu_base set earlier */
+ cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa;
+ cfg.startup_addr = c->startup_addr;
+
+ if (soc_is_dra74x() || soc_is_omap54xx()) {
+ if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+ cfg.startup_addr = omap5_secondary_hyp_startup;
+ omap5_erratum_workaround_801819();
+ }
+
+ cfg.cpu1_rstctrl_va = ioremap(cfg.cpu1_rstctrl_pa, 4);
+ if (!cfg.cpu1_rstctrl_va)
+ return;
/*
* Initialise the SCU and wake up the secondary core using
* wakeup_secondary().
*/
- if (scu_base)
- scu_enable(scu_base);
+ if (cfg.scu_base)
+ scu_enable(cfg.scu_base);
- if (cpu_is_omap446x())
- startup_addr = omap4460_secondary_startup;
- if (soc_is_dra74x() || soc_is_omap54xx())
- omap5_erratum_workaround_801819();
+ /*
+ * Reset CPU1 before configuring, otherwise kexec will
+ * end up trying to use old kernel startup address.
+ */
+ if (cfg.cpu1_rstctrl_va) {
+ writel_relaxed(1, cfg.cpu1_rstctrl_va);
+ readl_relaxed(cfg.cpu1_rstctrl_va);
+ writel_relaxed(0, cfg.cpu1_rstctrl_va);
+ }
/*
* Write the address of secondary startup routine into the
* A barrier is added to ensure that write buffer is drained
*/
if (omap_secure_apis_support())
- omap_auxcoreboot_addr(virt_to_phys(startup_addr));
+ omap_auxcoreboot_addr(virt_to_phys(cfg.startup_addr));
else
- /*
- * If the boot CPU is in HYP mode then start secondary
- * CPU in HYP mode as well.
- */
- if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
- writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup),
- base + OMAP_AUX_CORE_BOOT_1);
- else
- writel_relaxed(virt_to_phys(omap5_secondary_startup),
- base + OMAP_AUX_CORE_BOOT_1);
-
+ writel_relaxed(virt_to_phys(cfg.startup_addr),
+ base + OMAP_AUX_CORE_BOOT_1);
}
const struct smp_operations omap4_smp_ops __initconst = {
.smp_boot_secondary = omap4_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = omap4_cpu_die,
+ .cpu_kill = omap4_cpu_kill,
#endif
};
static u32 dram_sync_size;
/*
- * The OMAP4 bus structure contains asynchrnous bridges which can buffer
+ * The OMAP4 bus structure contains asynchronous bridges which can buffer
* data writes from the MPU. These asynchronous bridges can be found on
* paths between the MPU to EMIF, and the MPU to L3 interconnects.
*
}
/*
- * SAR RAM used to save and restore the HW
- * context in low power modes
+ * SAR RAM used to save and restore the HW context in low power modes.
+ * Note that we need to initialize this very early for kexec. See
+ * omap4_mpuss_early_init().
*/
-static int __init omap4_sar_ram_init(void)
+void __init omap4_sar_ram_init(void)
{
unsigned long sar_base;
else if (soc_is_omap54xx())
sar_base = OMAP54XX_SAR_RAM_BASE;
else
- return -ENOMEM;
+ return;
/* Static mapping, never released */
sar_ram_base = ioremap(sar_base, SZ_16K);
if (WARN_ON(!sar_ram_base))
- return -ENOMEM;
-
- return 0;
+ return;
}
-omap_early_initcall(omap4_sar_ram_init);
static const struct of_device_id intc_match[] = {
{ .compatible = "ti,omap4-wugen-mpu", },
return;
}
- rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), clk_name, NULL);
+ r = clk_get_sys(NULL, clk_name);
+
+ if (IS_ERR(r) && of_have_populated_dt()) {
+ struct of_phandle_args clkspec;
+
+ clkspec.np = of_find_node_by_name(NULL, clk_name);
+
+ r = of_clk_get_from_provider(&clkspec);
+
+ rc = clk_register_clkdev(r, clk_alias,
+ dev_name(&od->pdev->dev));
+ } else {
+ rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev),
+ clk_name, NULL);
+ }
+
if (rc) {
if (rc == -ENODEV || rc == -ENOMEM)
dev_err(&od->pdev->dev,
* function returns a value different than the value the caller got
* the last time it called this function.
*
- * If any hwmods exist for the omap_device assoiated with @pdev,
+ * If any hwmods exist for the omap_device associated with @pdev,
* return the context loss counter for that hwmod, otherwise return
* zero.
*/
*/
#define OMAP4_RST_CTRL_ST_OFFSET 4
+/*
+ * Maximum length for module clock handle names
+ */
+#define MOD_CLK_MAX_NAME_LEN 32
+
/**
* struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
* @enable_module: function to enable a module (via MODULEMODE)
int (*init_clkdm)(struct omap_hwmod *oh);
void (*update_context_lost)(struct omap_hwmod *oh);
int (*get_context_lost)(struct omap_hwmod *oh);
+ int (*disable_direct_prcm)(struct omap_hwmod *oh);
};
/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
- * functional clock pointer) if a main_clk is present. Returns 0 on
- * success or -EINVAL on error.
+ * functional clock pointer) if a clock matching the hwmod name is found,
+ * or a main_clk is present. Returns 0 on success or -EINVAL on error.
*/
static int _init_main_clk(struct omap_hwmod *oh)
{
int ret = 0;
+ char name[MOD_CLK_MAX_NAME_LEN];
+ struct clk *clk;
- if (!oh->main_clk)
- return 0;
+ /* +7 magic comes from '_mod_ck' suffix */
+ if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
+ pr_warn("%s: warning: cropping name for %s\n", __func__,
+ oh->name);
+
+ strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
+ strcat(name, "_mod_ck");
+
+ clk = clk_get(NULL, name);
+ if (!IS_ERR(clk)) {
+ oh->_clk = clk;
+ soc_ops.disable_direct_prcm(oh);
+ oh->main_clk = kstrdup(name, GFP_KERNEL);
+ } else {
+ if (!oh->main_clk)
+ return 0;
+
+ oh->_clk = clk_get(NULL, oh->main_clk);
+ }
- oh->_clk = clk_get(NULL, oh->main_clk);
if (IS_ERR(oh->_clk)) {
pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
oh->name, oh->main_clk);
{
struct omap_hwmod_rst_info ohri;
int ret = -EINVAL;
- int hwsup = 0;
if (!oh)
return -EINVAL;
* might not be completed. The clockdomain can be set
* in HW_AUTO only when the module become ready.
*/
- hwsup = clkdm_in_hwsup(oh->clkdm);
+ clkdm_deny_idle(oh->clkdm);
ret = clkdm_hwmod_enable(oh->clkdm, oh);
if (ret) {
WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
* Set the clockdomain to HW_AUTO, assuming that the
* previous state was HW_AUTO.
*/
- if (hwsup)
- clkdm_allow_idle(oh->clkdm);
+ clkdm_allow_idle(oh->clkdm);
clkdm_hwmod_disable(oh->clkdm, oh);
}
static int _enable(struct omap_hwmod *oh)
{
int r;
- int hwsup = 0;
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
* completely the module. The clockdomain can be set
* in HW_AUTO only when the module become ready.
*/
- hwsup = clkdm_in_hwsup(oh->clkdm) &&
- !clkdm_missing_idle_reporting(oh->clkdm);
+ clkdm_deny_idle(oh->clkdm);
r = clkdm_hwmod_enable(oh->clkdm, oh);
if (r) {
WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
-EINVAL;
- if (!r) {
- /*
- * Set the clockdomain to HW_AUTO only if the target is ready,
- * assuming that the previous state was HW_AUTO
- */
- if (oh->clkdm && hwsup)
- clkdm_allow_idle(oh->clkdm);
+ if (oh->clkdm)
+ clkdm_allow_idle(oh->clkdm);
+ if (!r) {
oh->_state = _HWMOD_STATE_ENABLED;
/* Access the sysconfig only if the target is ready */
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
+ if (oh->clkdm)
+ clkdm_deny_idle(oh->clkdm);
+
if (oh->flags & HWMOD_BLOCK_WFI)
cpu_idle_poll_ctrl(false);
if (soc_ops.disable_module)
* transition to complete properly.
*/
_disable_clocks(oh);
- if (oh->clkdm)
+ if (oh->clkdm) {
+ clkdm_allow_idle(oh->clkdm);
clkdm_hwmod_disable(oh->clkdm, oh);
+ }
/* Mux pins for device idle if populated */
if (oh->mux && oh->mux->pads_dynamic) {
oh->prcm.omap4.rstctrl_offs);
}
+/**
+ * _omap4_disable_direct_prcm - disable direct PRCM control for hwmod
+ * @oh: struct omap_hwmod * to disable control for
+ *
+ * Disables direct PRCM clkctrl done by hwmod core. Instead, the hwmod
+ * will be using its main_clk to enable/disable the module. Returns
+ * 0 if successful.
+ */
+static int _omap4_disable_direct_prcm(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return -EINVAL;
+
+ oh->prcm.omap4.clkctrl_offs = 0;
+ oh->prcm.omap4.modulemode = 0;
+
+ return 0;
+}
+
/**
* _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to deassert hardreset
soc_ops.init_clkdm = _init_clkdm;
soc_ops.update_context_lost = _omap4_update_context_lost;
soc_ops.get_context_lost = _omap4_get_context_lost;
+ soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
} else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() ||
soc_is_am43xx()) {
soc_ops.enable_module = _omap4_enable_module;
soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
+ soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
} else {
WARN(1, "omap_hwmod: unknown SoC type\n");
}
extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
extern struct omap_hwmod am33xx_dcan1_hwmod;
extern struct omap_hwmod am33xx_elm_hwmod;
extern struct omap_hwmod am33xx_epwmss0_hwmod;
-extern struct omap_hwmod am33xx_ecap0_hwmod;
-extern struct omap_hwmod am33xx_eqep0_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
extern struct omap_hwmod am33xx_epwmss1_hwmod;
-extern struct omap_hwmod am33xx_ecap1_hwmod;
-extern struct omap_hwmod am33xx_eqep1_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
extern struct omap_hwmod am33xx_epwmss2_hwmod;
-extern struct omap_hwmod am33xx_ecap2_hwmod;
-extern struct omap_hwmod am33xx_eqep2_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
extern struct omap_hwmod am33xx_gpio1_hwmod;
extern struct omap_hwmod am33xx_gpio2_hwmod;
extern struct omap_hwmod am33xx_gpio3_hwmod;
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_ecap0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_eqep0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_ehrpwm0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-
static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
{
.pa_start = 0x48302000,
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_ecap1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_eqep1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_ehrpwm1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
{
.pa_start = 0x48304000,
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_ecap2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_eqep2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_ehrpwm2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l3s cfg -> gpmc */
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
.sysc = &am33xx_epwmss_sysc,
};
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
- .name = "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
- .name = "eqep",
-};
-
-struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
- .name = "ehrpwm",
-};
-
/* epwmss0 */
struct omap_hwmod am33xx_epwmss0_hwmod = {
.name = "epwmss0",
},
};
-/* ecap0 */
-struct omap_hwmod am33xx_ecap0_hwmod = {
- .name = "ecap0",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep0 */
-struct omap_hwmod am33xx_eqep0_hwmod = {
- .name = "eqep0",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-struct omap_hwmod am33xx_ehrpwm0_hwmod = {
- .name = "ehrpwm0",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/* epwmss1 */
struct omap_hwmod am33xx_epwmss1_hwmod = {
.name = "epwmss1",
},
};
-/* ecap1 */
-struct omap_hwmod am33xx_ecap1_hwmod = {
- .name = "ecap1",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep1 */
-struct omap_hwmod am33xx_eqep1_hwmod = {
- .name = "eqep1",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-struct omap_hwmod am33xx_ehrpwm1_hwmod = {
- .name = "ehrpwm1",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/* epwmss2 */
struct omap_hwmod am33xx_epwmss2_hwmod = {
.name = "epwmss2",
},
};
-/* ecap2 */
-struct omap_hwmod am33xx_ecap2_hwmod = {
- .name = "ecap2",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep2 */
-struct omap_hwmod am33xx_eqep2_hwmod = {
- .name = "eqep2",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-struct omap_hwmod am33xx_ehrpwm2_hwmod = {
- .name = "ehrpwm2",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/*
* 'gpio' class: for gpio 0,1,2,3
*/
{
RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
+ RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET);
RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
}
&am33xx_l4_ls__spinlock,
&am33xx_l4_ls__elm,
&am33xx_l4_ls__epwmss0,
- &am33xx_epwmss0__ecap0,
- &am33xx_epwmss0__eqep0,
- &am33xx_epwmss0__ehrpwm0,
&am33xx_l4_ls__epwmss1,
- &am33xx_epwmss1__ecap1,
- &am33xx_epwmss1__eqep1,
- &am33xx_epwmss1__ehrpwm1,
&am33xx_l4_ls__epwmss2,
- &am33xx_epwmss2__ecap2,
- &am33xx_epwmss2__eqep2,
- &am33xx_epwmss2__ehrpwm2,
&am33xx_l3_s__gpmc,
&am33xx_l3_main__lcdc,
&am33xx_l4_ls__mcspi0,
.name = "mcbsp2_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
.mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs,
- .main_clk = "mcbsp2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
- },
- },
+ .main_clk = "mcbsp2_ick",
+ .flags = HWMOD_NO_IDLEST,
};
/* mcbsp3_sidetone */
.name = "mcbsp3_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
.mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs,
- .main_clk = "mcbsp3_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP3_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
- },
- },
+ .main_clk = "mcbsp3_ick",
+ .flags = HWMOD_NO_IDLEST,
};
/* SR common */
},
};
-static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
- .name = "ehrpwm3",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_epwmss4_hwmod = {
.name = "epwmss4",
.class = &am33xx_epwmss_hwmod_class,
},
};
-static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
- .name = "ehrpwm4",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_epwmss5_hwmod = {
.name = "epwmss5",
.class = &am33xx_epwmss_hwmod_class,
},
};
-static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
- .name = "ehrpwm5",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_spi2_hwmod = {
.name = "spi2",
.class = &am33xx_spi_hwmod_class,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
- .master = &am43xx_epwmss3_hwmod,
- .slave = &am43xx_ehrpwm3_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_epwmss4_hwmod,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
- .master = &am43xx_epwmss4_hwmod,
- .slave = &am43xx_ehrpwm4_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_epwmss5_hwmod,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
- .master = &am43xx_epwmss5_hwmod,
- .slave = &am43xx_ehrpwm5_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_spi2_hwmod,
&am43xx_l4_ls__timer10,
&am43xx_l4_ls__timer11,
&am43xx_l4_ls__epwmss3,
- &am43xx_epwmss3__ehrpwm3,
&am43xx_l4_ls__epwmss4,
- &am43xx_epwmss4__ehrpwm4,
&am43xx_l4_ls__epwmss5,
- &am43xx_epwmss5__ehrpwm5,
&am43xx_l4_ls__mcspi2,
&am43xx_l4_ls__mcspi3,
&am43xx_l4_ls__mcspi4,
&am33xx_l4_ls__spinlock,
&am33xx_l4_ls__elm,
&am33xx_l4_ls__epwmss0,
- &am33xx_epwmss0__ecap0,
- &am33xx_epwmss0__eqep0,
- &am33xx_epwmss0__ehrpwm0,
&am33xx_l4_ls__epwmss1,
- &am33xx_epwmss1__ecap1,
- &am33xx_epwmss1__eqep1,
- &am33xx_epwmss1__ehrpwm1,
&am33xx_l4_ls__epwmss2,
- &am33xx_epwmss2__ecap2,
- &am33xx_epwmss2__eqep2,
- &am33xx_epwmss2__ehrpwm2,
&am33xx_l3_s__gpmc,
&am33xx_l4_ls__mcspi0,
&am33xx_l4_ls__mcspi1,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = {
- {
- .name = "family",
- .pa_start = 0x58000000,
- .pa_end = 0x5800007f,
- .flags = ADDR_TYPE_RT
- },
-};
-
/* l3_main_1 -> dss */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_dss_hwmod,
.clk = "l3_iclk_div",
- .addr = dra7xx_dss_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space dra7xx_dss_dispc_addrs[] = {
- {
- .name = "dispc",
- .pa_start = 0x58001000,
- .pa_end = 0x58001fff,
- .flags = ADDR_TYPE_RT
- },
-};
-
/* l3_main_1 -> dispc */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_dss_dispc_hwmod,
.clk = "l3_iclk_div",
- .addr = dra7xx_dss_dispc_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space dra7xx_dss_hdmi_addrs[] = {
- {
- .name = "hdmi_wp",
- .pa_start = 0x58040000,
- .pa_end = 0x580400ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l3_main_1 -> dispc */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_dss_hdmi_hwmod,
.clk = "l3_iclk_div",
- .addr = dra7xx_dss_hdmi_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = {
- {
- .pa_start = 0x4b300000,
- .pa_end = 0x4b30007f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l3_main_1 -> qspi */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_qspi_hwmod,
.clk = "l3_iclk_div",
- .addr = dra7xx_qspi_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
.sysc = &ti81xx_rtc_sysc,
};
-struct omap_hwmod ti81xx_rtc_hwmod = {
+static struct omap_hwmod ti81xx_rtc_hwmod = {
.name = "rtc",
.class = &ti81xx_rtc_hwmod_class,
.clkdm_name = "alwon_l3s_clkdm",
#include <linux/platform_data/wkup_m3.h>
#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <linux/platform_data/media/ir-rx51.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <plat/dmtimer.h>
#include "common.h"
},
};
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+static struct omap_mcbsp_platform_data mcbsp_pdata;
+static void __init omap3_mcbsp_init(void)
+{
+ omap3_mcbsp_init_pdata_callback(&mcbsp_pdata);
+}
+#else
+static void __init omap3_mcbsp_init(void) {}
+#endif
+
/*
* Few boards still need auxdata populated before we populate
* the dev entries in of_platform_populate().
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
+ /* McBSP modules with sidetone core */
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+ OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
+ OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata),
+#endif
#endif
#ifdef CONFIG_SOC_AM33XX
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
of_machine_is_compatible("ti,omap3"))
omap_sdrc_init(NULL, NULL);
+ if (of_machine_is_compatible("ti,omap3"))
+ omap3_mcbsp_init();
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
{
- /* XXX The usecount test is racy */
- if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) &&
- !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING))
- clkdm_allow_idle(clkdm);
- else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
- clkdm->usecount == 0)
- clkdm_sleep(clkdm);
+ clkdm_allow_idle(clkdm);
return 0;
}
* @pwrdm: struct powerdomain * to operate on
* @curr_pwrst: current power state of @pwrdm
* @pwrst: power state to switch to
- * @hwsup: ptr to a bool to return whether the clkdm is hardware-supervised
*
* Determine whether the powerdomain needs to be turned on before
* attempting to switch power states. Called by
* "Types of sleep_switch" comment above).
*/
static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
- u8 curr_pwrst, u8 pwrst,
- bool *hwsup)
+ u8 curr_pwrst, u8 pwrst)
{
u8 sleep_switch;
arch_pwrdm->pwrdm_set_lowpwrstchange) {
sleep_switch = LOWPOWERSTATE_SWITCH;
} else {
- *hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
- clkdm_wakeup_nolock(pwrdm->pwrdm_clkdms[0]);
+ clkdm_deny_idle_nolock(pwrdm->pwrdm_clkdms[0]);
sleep_switch = FORCEWAKEUP_SWITCH;
}
} else {
* _pwrdm_restore_clkdm_state - restore the clkdm hwsup state after pwrst change
* @pwrdm: struct powerdomain * to operate on
* @sleep_switch: return value from _pwrdm_save_clkdm_state_and_activate()
- * @hwsup: should @pwrdm's first clockdomain be set to hardware-supervised mode?
*
* Restore the clockdomain state perturbed by
* _pwrdm_save_clkdm_state_and_activate(), and call the power state
* software-supervised sleep. No return value.
*/
static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm,
- u8 sleep_switch, bool hwsup)
+ u8 sleep_switch)
{
switch (sleep_switch) {
case FORCEWAKEUP_SWITCH:
- if (hwsup)
- clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]);
- else
- clkdm_sleep_nolock(pwrdm->pwrdm_clkdms[0]);
+ clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]);
break;
case LOWPOWERSTATE_SWITCH:
if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
u8 next_pwrst, sleep_switch;
int curr_pwrst;
int ret = 0;
- bool hwsup = false;
if (!pwrdm || IS_ERR(pwrdm))
return -EINVAL;
goto osps_out;
sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
- pwrst, &hwsup);
+ pwrst);
ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
if (ret)
pr_err("%s: unable to set power state of powerdomain: %s\n",
__func__, pwrdm->name);
- _pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup);
+ _pwrdm_restore_clkdm_state(pwrdm, sleep_switch);
osps_out:
pwrdm_unlock(pwrdm);
/* RM RSTST offsets */
#define AM43XX_RM_GFX_RSTST_OFFSET 0x0014
+#define AM43XX_RM_PER_RSTST_OFFSET 0x0014
#define AM43XX_RM_WKUP_RSTST_OFFSET 0x0014
/* CM instances */
/* PRM.PER_PRM register offsets */
#define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000
#define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
-#define AM33XX_RM_PER_RSTST_OFFSET 0x0004
-#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004)
#define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008
#define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
#define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c
* don't adjust it down as your clock period increases the refresh interval
* will not be met. Setting all parameters for complete worst case may work,
* but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.
*
* Only the FULL speed values are given. Current code is such that rate
* changes must be made at DPLLoutx2. The actual value adjustment for low
if (!timer->io_base)
return -ENXIO;
+ omap_hwmod_setup_one(oh_name);
+
/* After the dmtimer is using hwmod these clocks won't be needed */
timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
if (IS_ERR(timer->fclk))
clk_put(src);
- omap_hwmod_setup_one(oh_name);
omap_hwmod_enable(oh);
__omap_dm_timer_init_regs(timer);
config MACH_OX810SE
bool "Support OX810SE Based Products"
- select ARM_TIMER_SP804
select COMMON_CLK_OXNAS
select CPU_ARM926T
select MFD_SYSCON
+ select OXNAS_RPS_TIMER
select PINCTRL_OXNAS
select RESET_OXNAS
select VERSATILE_FPGA_IRQ
bool "Enable support for MSM8974"
select HAVE_ARM_ARCH_TIMER
+config ARCH_MDM9615
+ bool "Enable support for MDM9615"
+ select CLKSRC_QCOM
+
endif
"qcom,ipq8064",
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
+ "qcom,mdm9615",
NULL
};
#include <plat/samsung-time.h>
#include "common.h"
+#include "mach-smartq.h"
#include "regs-modem.h"
#define UCON S3C2410_UCON_DEFAULT
select ARCH_RCAR_GEN2
select I2C
+config ARCH_R8A7792
+ bool "R-Car V2H (R8A77920)"
+ select ARCH_RCAR_GEN2
+
config ARCH_R8A7793
bool "R-Car M2-N (R8A7793)"
select ARCH_RCAR_GEN2
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
+obj-$(CONFIG_ARCH_R8A7792) += setup-r8a7792.o
obj-$(CONFIG_ARCH_R8A7793) += setup-r8a7793.o
obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
unsigned long arg);
extern bool shmobile_smp_cpu_can_disable(unsigned int cpu);
+extern bool shmobile_smp_init_fallback_ops(void);
extern void shmobile_boot_scu(void);
extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
unsigned int max_cpus);
#include <asm/suspend.h>
#include "common.h"
#include "platsmp-apmu.h"
+#include "rcar-gen2.h"
static struct {
void __iomem *iomem;
return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL;
}
+#ifdef CONFIG_SMP
static void apmu_init_cpu(struct resource *res, int cpu, int bit)
{
if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem)
}
}
-void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
- struct rcar_apmu_config *apmu_config,
- int num)
+static const struct of_device_id apmu_ids[] = {
+ { .compatible = "renesas,apmu" },
+ { /*sentinel*/ }
+};
+
+static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
+{
+ struct device_node *np_apmu, *np_cpu;
+ struct resource res;
+ int bit, index;
+ u32 id;
+
+ for_each_matching_node(np_apmu, apmu_ids) {
+ /* only enable the cluster that includes the boot CPU */
+ bool is_allowed = false;
+
+ for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
+ np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
+ if (np_cpu) {
+ if (!of_property_read_u32(np_cpu, "reg", &id)) {
+ if (id == cpu_logical_map(0)) {
+ is_allowed = true;
+ of_node_put(np_cpu);
+ break;
+ }
+
+ }
+ of_node_put(np_cpu);
+ }
+ }
+ if (!is_allowed)
+ continue;
+
+ for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
+ np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
+ if (np_cpu) {
+ if (!of_property_read_u32(np_cpu, "reg", &id)) {
+ index = get_logical_index(id);
+ if ((index >= 0) &&
+ !of_address_to_resource(np_apmu,
+ 0, &res))
+ fn(&res, index, bit);
+ }
+ of_node_put(np_cpu);
+ }
+ }
+ }
+}
+
+static void __init shmobile_smp_apmu_setup_boot(void)
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+}
- /* perform per-cpu setup */
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
+ struct rcar_apmu_config *apmu_config,
+ int num)
+{
+ shmobile_smp_apmu_setup_boot();
apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
}
-#ifdef CONFIG_SMP
int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
/* For this particular CPU register boot vector */
return apmu_wrap(cpu, apmu_power_on);
}
+
+static void __init shmobile_smp_apmu_prepare_cpus_dt(unsigned int max_cpus)
+{
+ shmobile_smp_apmu_setup_boot();
+ apmu_parse_dt(apmu_init_cpu);
+ rcar_gen2_pm_init();
+}
+
+static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu,
+ struct task_struct *idle)
+{
+ /* Error out when hardware debug mode is enabled */
+ if (rcar_gen2_read_mode_pins() & BIT(21)) {
+ pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
+ return -ENOTSUPP;
+ }
+
+ return shmobile_smp_apmu_boot_secondary(cpu, idle);
+}
+
+static struct smp_operations apmu_smp_ops __initdata = {
+ .smp_prepare_cpus = shmobile_smp_apmu_prepare_cpus_dt,
+ .smp_boot_secondary = shmobile_smp_apmu_boot_secondary_md21,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_can_disable = shmobile_smp_cpu_can_disable,
+ .cpu_die = shmobile_smp_apmu_cpu_die,
+ .cpu_kill = shmobile_smp_apmu_cpu_kill,
#endif
+};
+
+CPU_METHOD_OF_DECLARE(shmobile_smp_apmu, "renesas,apmu", &apmu_smp_ops);
+#endif /* CONFIG_SMP */
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND)
/* nicked from arch/arm/mach-exynos/hotplug.c */
return true; /* Hotplug of any CPU is supported */
}
#endif
+
+bool __init shmobile_smp_init_fallback_ops(void)
+{
+ /* fallback on PSCI/smp_ops if no other DT based method is detected */
+ return platform_can_secondary_boot() ? true : false;
+}
static void __init r8a7779_sysc_init(void)
{
- void __iomem *base = rcar_sysc_init(0xffd85000);
-
- /* enable all interrupt sources, but do not use interrupt handler */
- iowrite32(0x0131000e, base + SYSCIER);
- iowrite32(0, base + SYSCIMR);
+ rcar_sysc_init(0xffd85000, 0x0131000e);
}
#else /* CONFIG_PM || CONFIG_SMP */
#define CA7RESCNT 0x0044
/* On-chip RAM */
-#define MERAM 0xe8080000
-#define RAM 0xe6300000
+#define ICRAM1 0xe63c0000 /* Inter Connect RAM1 (4 KiB) */
/* SYSC */
#define SYSCIER 0x0c
static void __init rcar_gen2_sysc_init(u32 syscier)
{
- void __iomem *base = rcar_sysc_init(0xe6180000);
-
- /* enable all interrupt sources, but do not use interrupt handler */
- iowrite32(syscier, base + SYSCIER);
- iowrite32(0, base + SYSCIMR);
+ rcar_sysc_init(0xe6180000, syscier);
}
#else /* CONFIG_SMP */
struct device_node *np, *cpus;
bool has_a7 = false;
bool has_a15 = false;
- phys_addr_t boot_vector_addr = 0;
+ phys_addr_t boot_vector_addr = ICRAM1;
u32 syscier = 0;
if (once++)
has_a7 = true;
}
- if (of_machine_is_compatible("renesas,r8a7790")) {
- boot_vector_addr = MERAM;
+ if (of_machine_is_compatible("renesas,r8a7790"))
syscier = 0x013111ef;
-
- } else if (of_machine_is_compatible("renesas,r8a7791")) {
- boot_vector_addr = RAM;
+ else if (of_machine_is_compatible("renesas,r8a7791"))
syscier = 0x00111003;
- }
/* RAM for jump stub, because BAR requires 256KB aligned address */
p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
struct dev_power_governor *gov = rmobile_pd->gov;
genpd->flags = GENPD_FLAG_PM_CLK;
- pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
genpd->attach_dev = cpg_mstp_attach_dev;
genpd->detach_dev = cpg_mstp_detach_dev;
__rmobile_pd_power_up(rmobile_pd, false);
+ pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
}
static int rmobile_pd_suspend_busy(void)
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
+ .smp_init = shmobile_smp_init_fallback_ops,
.smp = smp_ops(r8a7790_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
};
DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+ .smp_init = shmobile_smp_init_fallback_ops,
.smp = smp_ops(r8a7791_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
--- /dev/null
+/*
+ * r8a7792 processor support
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "rcar-gen2.h"
+
+static const char * const r8a7792_boards_compat_dt[] __initconst = {
+ "renesas,r8a7792",
+ NULL,
+};
+
+DT_MACHINE_START(R8A7792_DT, "Generic R8A7792 (Flattened Device Tree)")
+ .init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
+ .init_time = rcar_gen2_timer_init,
+ .reserve = rcar_gen2_reserve,
+ .dt_compat = r8a7792_boards_compat_dt,
+MACHINE_END
return mode;
}
+static unsigned int __init get_extal_freq(void)
+{
+ struct device_node *cpg, *extal;
+ u32 freq = 20000000;
+
+ cpg = of_find_compatible_node(NULL, NULL,
+ "renesas,rcar-gen2-cpg-clocks");
+ if (!cpg)
+ return freq;
+
+ extal = of_parse_phandle(cpg, "clocks", 0);
+ of_node_put(cpg);
+ if (!extal)
+ return freq;
+
+ of_property_read_u32(extal, "clock-frequency", &freq);
+ of_node_put(extal);
+ return freq;
+}
+
#define CNTCR 0
#define CNTFID0 0x20
u32 mode = rcar_gen2_read_mode_pins();
#ifdef CONFIG_ARM_ARCH_TIMER
void __iomem *base;
- int extal_mhz = 0;
u32 freq;
- if (of_machine_is_compatible("renesas,r8a7794")) {
+ if (of_machine_is_compatible("renesas,r8a7792") ||
+ of_machine_is_compatible("renesas,r8a7794")) {
freq = 260000000 / 8; /* ZS / 8 */
/* CNTVOFF has to be initialized either from non-secure
* Hypervisor mode or secure Monitor mode with SCR.NS==1.
* with the counter disabled. Moreover, it may also report
* a potentially incorrect fixed 13 MHz frequency. To be
* correct these registers need to be updated to use the
- * frequency EXTAL / 2 which can be determined by the MD pins.
+ * frequency EXTAL / 2.
*/
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- extal_mhz = 15;
- break;
- case MD(13):
- extal_mhz = 20;
- break;
- case MD(14):
- extal_mhz = 26;
- break;
- case MD(13) | MD(14):
- extal_mhz = 30;
- break;
- }
-
- /* The arch timer frequency equals EXTAL / 2 */
- freq = extal_mhz * (1000000 / 2);
+ freq = get_extal_freq() / 2;
}
/* Remap "armgcnt address map" space */
NULL
};
-DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
+static void sti_l2_write_sec(unsigned long val, unsigned reg)
+{
+ /*
+ * We can't write to secure registers as we are in non-secure
+ * mode, until we have some SMI service available.
+ */
+}
+
+DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
.dt_compat = stih41x_dt_match,
.l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE |
L310_AUX_CTRL_DATA_PREFETCH |
L2C_AUX_CTRL_WAY_SIZE(4),
.l2c_aux_mask = 0xc0000fff,
.smp = smp_ops(sti_smp_ops),
+ .l2c_write_sec = sti_l2_write_sec,
MACHINE_END
obj-y += setup.o smc.o
obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/smp.h>
#include "smc.h"
return 0;
}
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * cpu_kill() and cpu_die() run concurrently on different cores.
+ * Firmware will only "kill" a core once it has properly "died".
+ * Try a few times to kill a core before giving up, and sleep
+ * between tries to give that core enough time to die.
+ */
+static int tango_cpu_kill(unsigned int cpu)
+{
+ int i, err;
+
+ for (i = 0; i < 10; ++i) {
+ msleep(10);
+ err = tango_aux_core_kill(cpu);
+ if (!err)
+ return true;
+ }
+
+ return false;
+}
+
+static void tango_cpu_die(unsigned int cpu)
+{
+ while (tango_aux_core_die(cpu) < 0)
+ cpu_relax();
+
+ panic("cpu %d failed to die\n", cpu);
+}
+#endif
+
static const struct smp_operations tango_smp_ops __initconst = {
.smp_boot_secondary = tango_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = tango_cpu_kill,
+ .cpu_die = tango_cpu_die,
+#endif
};
CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops);
--- /dev/null
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+ tango_suspend(virt_to_phys(cpu_resume));
+
+ return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+ if (state == PM_SUSPEND_MEM)
+ return cpu_suspend(0, tango_pm_powerdown);
+
+ return -EINVAL;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+ .enter = tango_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init tango_pm_init(void)
+{
+ suspend_set_ops(&tango_pm_ops);
+ return 0;
+}
+
+late_initcall(tango_pm_init);
#define tango_set_l2_control(val) tango_smc(val, 0x102)
#define tango_start_aux_core(val) tango_smc(val, 0x104)
-#define tango_set_aux_boot_addr(val) tango_smc((unsigned int)val, 0x105)
+#define tango_set_aux_boot_addr(val) tango_smc(val, 0x105)
+#define tango_suspend(val) tango_smc(val, 0x120)
+#define tango_aux_core_die(val) tango_smc(val, 0x121)
+#define tango_aux_core_kill(val) tango_smc(val, 0x122)
-obj-y := uniphier.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+++ /dev/null
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach/arch.h>
-
-static const char * const uniphier_dt_compat[] __initconst = {
- "socionext,ph1-sld3",
- "socionext,ph1-ld4",
- "socionext,ph1-pro4",
- "socionext,ph1-sld8",
- "socionext,ph1-pro5",
- "socionext,proxstream2",
- "socionext,ph1-ld6b",
- NULL,
-};
-
-DT_MACHINE_START(UNIPHIER, "Socionext UniPhier")
- .dt_compat = uniphier_dt_compat,
-MACHINE_END
void __init s3c64xx_init_cpu(void)
{
- samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+ samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118);
if (!samsung_cpu_id) {
/*
* S3C6400 has the ID register in a different place,
* and needs a write before it can be read.
*/
- __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
- samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+ writel_relaxed(0x0, S3C_VA_SYS + 0xA1C);
+ samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
}
samsung_cpu_rev = 0;
pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
}
-void __init s5p_init_cpu(void __iomem *cpuid_addr)
+void __init s5p_init_cpu(const void __iomem *cpuid_addr)
{
- samsung_cpu_id = __raw_readl(cpuid_addr);
+ samsung_cpu_id = readl_relaxed(cpuid_addr);
samsung_cpu_rev = samsung_cpu_id & 0xFF;
pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(const void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
void s3c_pm_do_save(struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
- ptr->val = __raw_readl(ptr->reg);
+ ptr->val = readl_relaxed(ptr->reg);
S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
}
}
{
for (; count > 0; count--, ptr++) {
pr_debug("restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, __raw_readl(ptr->reg));
+ ptr->reg, ptr->val, readl_relaxed(ptr->reg));
- __raw_writel(ptr->val, ptr->reg);
+ writel_relaxed(ptr->val, ptr->reg);
}
}
void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++)
- __raw_writel(ptr->val, ptr->reg);
+ writel_relaxed(ptr->val, ptr->reg);
}
DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
{ .node_name = NULL },
};
DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm3_tbclk"),
DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm4_tbclk"),
DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm5_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48306200.pwm", "tbclk", "ehrpwm3_tbclk"),
+ DT_CLK("48308200.pwm", "tbclk", "ehrpwm4_tbclk"),
+ DT_CLK("4830a200.pwm", "tbclk", "ehrpwm5_tbclk"),
{ .node_name = NULL },
};
#define FEC_QUIRK_HAS_RACC (1 << 12)
/* Controller supports interrupt coalesc */
#define FEC_QUIRK_HAS_COALESCE (1 << 13)
+/* Interrupt doesn't wake CPU from deep idle */
+#define FEC_QUIRK_ERR006687 (1 << 14)
struct bufdesc_prop {
int qid;
#include <linux/if_vlan.h>
#include <linux/pinctrl/consumer.h>
#include <linux/prefetch.h>
+#include <soc/imx/cpuidle.h>
#include <asm/cacheflush.h>
if (ret)
goto err_enet_mii_probe;
+ if (fep->quirks & FEC_QUIRK_ERR006687)
+ imx6q_cpuidle_fec_irqs_used();
+
napi_enable(&fep->napi);
phy_start(ndev->phydev);
netif_tx_start_all_queues(ndev);
phy_disconnect(ndev->phydev);
+ if (fep->quirks & FEC_QUIRK_ERR006687)
+ imx6q_cpuidle_fec_irqs_unused();
+
fec_enet_clk_enable(ndev, false);
pinctrl_pm_select_sleep_state(&fep->pdev->dev);
pm_runtime_mark_last_busy(&fep->pdev->dev);
platform_set_drvdata(pdev, ndev);
+ if ((of_machine_is_compatible("fsl,imx6q") ||
+ of_machine_is_compatible("fsl,imx6dl")) &&
+ !of_property_read_bool(np, "fsl,err006687-workaround-present"))
+ fep->quirks |= FEC_QUIRK_ERR006687;
+
if (of_get_property(np, "fsl,magic-packet", NULL))
fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o
obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o
obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o
+obj-$(CONFIG_ARCH_R8A7792) += rcar-sysc.o r8a7792-sysc.o
# R-Car M2-N is identical to R-Car M2-W w.r.t. power domains.
obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o
obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o
obj-$(CONFIG_ARCH_R8A7795) += rcar-sysc.o r8a7795-sysc.o
+obj-$(CONFIG_ARCH_R8A7796) += rcar-sysc.o r8a7796-sysc.o
--- /dev/null
+/*
+ * Renesas R-Car V2H (R8A7792) System Controller
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7792_areas[] __initconst = {
+ { "always-on", 0, 0, R8A7792_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca15-scu", 0x180, 0, R8A7792_PD_CA15_SCU, R8A7792_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca15-cpu0", 0x40, 0, R8A7792_PD_CA15_CPU0, R8A7792_PD_CA15_SCU,
+ PD_CPU_NOCR },
+ { "ca15-cpu1", 0x40, 1, R8A7792_PD_CA15_CPU1, R8A7792_PD_CA15_SCU,
+ PD_CPU_NOCR },
+ { "sgx", 0xc0, 0, R8A7792_PD_SGX, R8A7792_PD_ALWAYS_ON },
+ { "imp", 0x140, 0, R8A7792_PD_IMP, R8A7792_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7792_sysc_info __initconst = {
+ .areas = r8a7792_areas,
+ .num_areas = ARRAY_SIZE(r8a7792_areas),
+};
--- /dev/null
+/*
+ * Renesas R-Car M3-W System Controller
+ *
+ * Copyright (C) 2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7796_areas[] __initconst = {
+ { "always-on", 0, 0, R8A7796_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca57-scu", 0x1c0, 0, R8A7796_PD_CA57_SCU, R8A7796_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca57-cpu0", 0x80, 0, R8A7796_PD_CA57_CPU0, R8A7796_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "ca57-cpu1", 0x80, 1, R8A7796_PD_CA57_CPU1, R8A7796_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "ca53-scu", 0x140, 0, R8A7796_PD_CA53_SCU, R8A7796_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca53-cpu0", 0x200, 0, R8A7796_PD_CA53_CPU0, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu1", 0x200, 1, R8A7796_PD_CA53_CPU1, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu2", 0x200, 2, R8A7796_PD_CA53_CPU2, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu3", 0x200, 3, R8A7796_PD_CA53_CPU3, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "cr7", 0x240, 0, R8A7796_PD_CR7, R8A7796_PD_ALWAYS_ON },
+ { "a3vc", 0x380, 0, R8A7796_PD_A3VC, R8A7796_PD_ALWAYS_ON },
+ { "a2vc0", 0x3c0, 0, R8A7796_PD_A2VC0, R8A7796_PD_A3VC },
+ { "a2vc1", 0x3c0, 1, R8A7796_PD_A2VC1, R8A7796_PD_A3VC },
+ { "3dg-a", 0x100, 0, R8A7796_PD_3DG_A, R8A7796_PD_ALWAYS_ON },
+ { "3dg-b", 0x100, 1, R8A7796_PD_3DG_B, R8A7796_PD_3DG_A },
+ { "a3ir", 0x180, 0, R8A7796_PD_A3IR, R8A7796_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7796_sysc_info __initconst = {
+ .areas = r8a7796_areas,
+ .num_areas = ARRAY_SIZE(r8a7796_areas),
+};
return false;
}
-void __iomem *rcar_sysc_init(phys_addr_t base)
-{
- rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
- if (!rcar_sysc_base)
- panic("unable to ioremap R-Car SYSC hardware block\n");
-
- return rcar_sysc_base;
-}
-
struct rcar_sysc_pd {
struct generic_pm_domain genpd;
struct rcar_sysc_ch ch;
#ifdef CONFIG_ARCH_R8A7791
{ .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info },
#endif
+#ifdef CONFIG_ARCH_R8A7792
+ { .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info },
+#endif
#ifdef CONFIG_ARCH_R8A7793
/* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */
{ .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info },
#endif
#ifdef CONFIG_ARCH_R8A7795
{ .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info },
+#endif
+#ifdef CONFIG_ARCH_R8A7796
+ { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
#endif
{ /* sentinel */ }
};
unsigned int i;
int error;
+ if (rcar_sysc_base)
+ return 0;
+
np = of_find_matching_node_and_match(NULL, rcar_sysc_matches, &match);
if (!np)
return -ENODEV;
domains->domains[area->isr_bit] = &pd->genpd;
}
- of_genpd_add_provider_onecell(np, &domains->onecell_data);
+ error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
out_put:
of_node_put(np);
return error;
}
early_initcall(rcar_sysc_pd_init);
+
+void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
+{
+ u32 syscimr;
+
+ if (!rcar_sysc_pd_init())
+ return;
+
+ rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+
+ /*
+ * Mask all interrupt sources to prevent the CPU from receiving them.
+ * Make sure not to clear reserved bits that were set before.
+ */
+ syscimr = ioread32(rcar_sysc_base + SYSCIMR);
+ syscimr |= syscier;
+ pr_debug("%s: syscimr = 0x%08x\n", __func__, syscimr);
+ iowrite32(syscimr, rcar_sysc_base + SYSCIMR);
+
+ /*
+ * SYSC needs all interrupt sources enabled to control power.
+ */
+ pr_debug("%s: syscier = 0x%08x\n", __func__, syscier);
+ iowrite32(syscier, rcar_sysc_base + SYSCIER);
+}
extern const struct rcar_sysc_info r8a7779_sysc_info;
extern const struct rcar_sysc_info r8a7790_sysc_info;
extern const struct rcar_sysc_info r8a7791_sysc_info;
+extern const struct rcar_sysc_info r8a7792_sysc_info;
extern const struct rcar_sysc_info r8a7794_sysc_info;
extern const struct rcar_sysc_info r8a7795_sysc_info;
+extern const struct rcar_sysc_info r8a7796_sysc_info;
#endif /* __SOC_RENESAS_RCAR_SYSC_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7796_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7796_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7796_PD_CA57_CPU0 0
+#define R8A7796_PD_CA57_CPU1 1
+#define R8A7796_PD_CA53_CPU0 5
+#define R8A7796_PD_CA53_CPU1 6
+#define R8A7796_PD_CA53_CPU2 7
+#define R8A7796_PD_CA53_CPU3 8
+#define R8A7796_PD_CA57_SCU 12
+#define R8A7796_PD_CR7 13
+#define R8A7796_PD_A3VC 14
+#define R8A7796_PD_3DG_A 17
+#define R8A7796_PD_3DG_B 18
+#define R8A7796_PD_CA53_SCU 21
+#define R8A7796_PD_A3IR 24
+#define R8A7796_PD_A2VC0 25
+#define R8A7796_PD_A2VC1 26
+
+/* Always-on power area */
+#define R8A7796_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A7796_SYSC_H__ */
/* McBSP platform and instance specific features */
bool has_wakeup; /* Wakeup capability */
bool has_ccr; /* Transceiver has configuration control registers */
- int (*enable_st_clock)(unsigned int, bool);
+ int (*force_ick_on)(struct clk *clk, bool force_on);
};
/**
const char *sidetone;
};
+void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
+
#endif
--- /dev/null
+/*
+ * Copyright (C) 2016 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAPDSS_PDATA_H
+#define __OMAPDSS_PDATA_H
+
+enum omapdss_version {
+ OMAPDSS_VER_UNKNOWN = 0,
+ OMAPDSS_VER_OMAP24xx,
+ OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */
+ OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */
+ OMAPDSS_VER_OMAP3630,
+ OMAPDSS_VER_AM35xx,
+ OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */
+ OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */
+ OMAPDSS_VER_OMAP4, /* All other OMAP4s */
+ OMAPDSS_VER_OMAP5,
+ OMAPDSS_VER_AM43xx,
+ OMAPDSS_VER_DRA7xx,
+};
+
+struct omap_dss_device;
+
+/* Board specific data */
+struct omap_dss_board_info {
+ int num_devices;
+ struct omap_dss_device **devices;
+ struct omap_dss_device *default_device;
+ const char *default_display_name;
+ int (*dsi_enable_pads)(int dsi_id, unsigned int lane_mask);
+ void (*dsi_disable_pads)(int dsi_id, unsigned int lane_mask);
+ int (*set_min_bus_tput)(struct device *dev, unsigned long r);
+ enum omapdss_version version;
+};
+
+#endif /* __OMAPDSS_PDATA_H */
int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch);
int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch);
-void __iomem *rcar_sysc_init(phys_addr_t base);
+void rcar_sysc_init(phys_addr_t base, u32 syscier);
#endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */
--- /dev/null
+/*
+ * Copyright 2016 Pengutronix, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __SOC_IMX_CPUIDLE_H__
+#define __SOC_IMX_CPUIDLE_H__
+
+#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_SOC_IMX6Q)
+void imx6q_cpuidle_fec_irqs_used(void);
+void imx6q_cpuidle_fec_irqs_unused(void);
+#else
+static inline void imx6q_cpuidle_fec_irqs_used(void) { }
+static inline void imx6q_cpuidle_fec_irqs_unused(void) { }
+#endif
+
+#endif /* __SOC_IMX_CPUIDLE_H__ */
#include <linux/kobject.h>
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/platform_data/omapdss.h>
#include <video/videomode.h>
enum omap_dss_dsi_trans_mode trans_mode;
};
-enum omapdss_version {
- OMAPDSS_VER_UNKNOWN = 0,
- OMAPDSS_VER_OMAP24xx,
- OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */
- OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */
- OMAPDSS_VER_OMAP3630,
- OMAPDSS_VER_AM35xx,
- OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */
- OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */
- OMAPDSS_VER_OMAP4, /* All other OMAP4s */
- OMAPDSS_VER_OMAP5,
- OMAPDSS_VER_AM43xx,
- OMAPDSS_VER_DRA7xx,
-};
-
-/* Board specific data */
-struct omap_dss_board_info {
- int num_devices;
- struct omap_dss_device **devices;
- struct omap_dss_device *default_device;
- const char *default_display_name;
- int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask);
- void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
- int (*set_min_bus_tput)(struct device *dev, unsigned long r);
- enum omapdss_version version;
-};
-
-/* Init with the board info */
-extern int omap_display_init(struct omap_dss_board_info *board_data);
-
struct omap_video_timings {
/* Unit: pixels */
u16 x_res;
{
unsigned int w;
- if (mcbsp->pdata->enable_st_clock)
- mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
+ if (mcbsp->pdata->force_ick_on)
+ mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, true);
/* Disable Sidetone clock auto-gating for normal operation */
w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
- if (mcbsp->pdata->enable_st_clock)
- mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
+ if (mcbsp->pdata->force_ick_on)
+ mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, false);
}
static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
if (!st_data)
return -ENOMEM;
+ st_data->mcbsp_iclk = clk_get(mcbsp->dev, "ick");
+ if (IS_ERR(st_data->mcbsp_iclk)) {
+ dev_warn(mcbsp->dev,
+ "Failed to get ick, sidetone might be broken\n");
+ st_data->mcbsp_iclk = NULL;
+ }
+
st_data->io_base_st = devm_ioremap(mcbsp->dev, res->start,
resource_size(res));
if (!st_data->io_base_st)
return ret;
}
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp)
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp)
{
if (mcbsp->pdata->buffer_size)
sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
- if (mcbsp->st_data)
+ if (mcbsp->st_data) {
sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ clk_put(mcbsp->st_data->mcbsp_iclk);
+ }
}
struct omap_mcbsp_st_data {
void __iomem *io_base_st;
+ struct clk *mcbsp_iclk;
bool running;
bool enabled;
s16 taps[128]; /* Sidetone filter coefficients */
int omap_st_is_enabled(struct omap_mcbsp *mcbsp);
int omap_mcbsp_init(struct platform_device *pdev);
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp);
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp);
#endif /* __ASOC_MCBSP_H */
match = of_match_device(omap_mcbsp_of_match, &pdev->dev);
if (match) {
struct device_node *node = pdev->dev.of_node;
+ struct omap_mcbsp_platform_data *pdata_quirk = pdata;
int buffer_size;
pdata = devm_kzalloc(&pdev->dev,
memcpy(pdata, match->data, sizeof(*pdata));
if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size))
pdata->buffer_size = buffer_size;
+ if (pdata_quirk)
+ pdata->force_ick_on = pdata_quirk->force_ick_on;
} else if (!pdata) {
dev_err(&pdev->dev, "missing platform data.\n");
return -EINVAL;
if (mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- omap_mcbsp_sysfs_remove(mcbsp);
+ omap_mcbsp_cleanup(mcbsp);
clk_put(mcbsp->fclk);
projects / cascardo / linux.git / commitdiff