drm: Extract&Document drm_irq.h

The drm_irq docs want one function from drmP.h, but that one is a
serious mess. Extract it, and while at it improve the docs a bit.
There's a bit a header loop issue since core data structures like
drm_device and drm_driver aren't in their own headers yet, which means
the drm_irq.h include in drmP.h needs to be in just the right spot :(

Also noticed that drm_vblank_crtc->last_wait is entirely unused,
remove it.

v2: git add drm_irq.h ...

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/doc: document all the properties in drm_mode_config

I'm fed up with the warning noise from kernel-doc.

Aside: I stumbled over dirty_info_property, which is only set by udl
and qxl. But we have a _lot_ more drivers implementing a dirty
callback on framebuffers. Not entirely sure what the ABI is supposed
to be here, but it seems confusing for sure.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-3-git-send-email-daniel.vetter@ffwll.ch

drm/drm-kms.rst: Remove unused drm_fourcc.h include directive

Right now there's nothing, and kernel-doc produces a warning because
of that. Remove it until we need it for a clean build.

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-1-git-send-email-daniel.vetter@ffwll.ch

drm/doc: Add kerneldoc for @index

Was forgotten when adding them all over. 0-day should complain about
new missing kernel-doc, not sure why that wasn't caught/fixed.

v2: Clarify that @index is invariant, as discussed with Chris Wilson.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-2-git-send-email-daniel.vetter@ffwll.ch

drm: Unexport drm_connector_unregister_all()

This has now been removed from all drivers as it is performed centrally
as a part of device unregistration for modesetting drivers. With the last
user gone, we can unexport it from the DRM module. That requires us to
move the code slightly to avoid the need for a forward declaration.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468427947-28037-2-git-send-email-chris@chris-wilson.co.uk

drm/sun4i: Remove redundant call to drm_connector_unregister_all()

drm_connector_unregister_all() is automatically called by
drm_dev_unregister() and so the manual call can be dropped.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468427947-28037-1-git-send-email-chris@chris-wilson.co.uk

Merge remote-tracking branch 'airlied/drm-next' into topic/drm-misc

Backmerge drm-next to be able to apply Chris' connector_unregister_all
cleanup (need latest i915 and sun4i state for that).

Also there's a trivial conflict in ttm_bo.c that git rerere fails to
remember.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/ttm: Delete an unnecessary check before the function call "ttm_tt_destroy"

The ttm_tt_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/54338f58-830c-a8b4-4554-5d4459bcd321@users.sourceforge.net

drm/vgem: Remember to offset relative timeouts to mod_timer() by jiffies

mod_timer() takes an absolute jiffie value, not a relative timeout and
quietly fixup the missed ret=0 otherwise gcc just always returns that
the fence timed out.

Testcase: igt/vgem_basic/fence
Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468834278-26716-1-git-send-email-chris@chris-wilson.co.uk

dma-buf: Release module reference on creation failure

If we fail to create the anon file, we need to remember to release the
module reference on the owner.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468840582-21469-1-git-send-email-chris@chris-wilson.co.uk

drm/arm: make fbdev support really optional

Currently enabling ARM HDLCD DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-21-git-send-email-tjakobi@math.uni-bielefeld.de

drm/ast: make fbdev support really optional

Currently enabling AST Server DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-20-git-send-email-tjakobi@math.uni-bielefeld.de

drm/virtio: make fbdev support really optional

Currently enabling VirtIO DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-19-git-send-email-tjakobi@math.uni-bielefeld.de

drm/udl: make fbdev support really optional

Currently enabling USB DisplayLink DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-17-git-send-email-tjakobi@math.uni-bielefeld.de

drm/bochs: make fbdev support really optional

Currently enabling Bochs DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-15-git-send-email-tjakobi@math.uni-bielefeld.de

drm/fsl-dcu: make fbdev support really optional

Currently enabling Freescale DCU DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-14-git-send-email-tjakobi@math.uni-bielefeld.de

drm/tilcdc: make fbdev support really optional

Currently enabling TI LCDC DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-13-git-send-email-tjakobi@math.uni-bielefeld.de

drm/gma500: make fbdev support really optional

Currently enabling Intel GMA DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-11-git-send-email-tjakobi@math.uni-bielefeld.de

drm/shmobile: make fbdev support really optional

Currently enabling SH Mobile DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-9-git-send-email-tjakobi@math.uni-bielefeld.de

drm/imx: make fbdev support really optional

Currently enabling Freescale i.MX DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-8-git-send-email-tjakobi@math.uni-bielefeld.de

drm/qxl: make fbdev support really optional

Currently enabling QXL DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-7-git-send-email-tjakobi@math.uni-bielefeld.de

drm/cirrus: make fbdev support really optional

Currently enabling QEMU Cirrus DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-6-git-send-email-tjakobi@math.uni-bielefeld.de

drm/mgag200: make fbdev support really optional

Currently enabling MGA G200 DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-5-git-send-email-tjakobi@math.uni-bielefeld.de

drm/omap: make fbdev support really optional

Currently enabling OMAP DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-4-git-send-email-tjakobi@math.uni-bielefeld.de

drm/armada: make fbdev support really optional

Currently enabling Marvell Armada DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-3-git-send-email-tjakobi@math.uni-bielefeld.de

drm/arc: make fbdev support really optional

Currently enabling ARC DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-2-git-send-email-tjakobi@math.uni-bielefeld.de

drm/ast: Delete an unnecessary check before drm_gem_object_unreference_unlocked()

The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/f28c063f-ec56-e62b-9370-89ce833fa4e5@users.sourceforge.net

drm/hdlcd: Delete an unnecessary check before drm_fbdev_cma_hotplug_event()

The drm_fbdev_cma_hotplug_event() function tests whether its argument
is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/c2b0f310-fa06-f4cc-0014-ea7f40564d26@users.sourceforge.net

drm/cirrus: Delete an unnecessary check before drm_gem_object_unreference_unlocked()

The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/bebf88d8-cc28-657a-e96c-58447d8cf376@users.sourceforge.net

drm/tegra: Delete an unnecessary check before the function call "vunmap"

The vunmap() function performs also input parameter validation.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/b3fbdcaf-1bda-7ce9-935b-2d716727ec39@users.sourceforge.net

drm/virtgpu: Delete unnecessary checks before drm_gem_object_unreference_unlocked()

The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the calls is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5e3dafff-72bb-e616-e84a-368f78fa66b1@users.sourceforge.net

drm/arcpgu: Delete an unnecessary check before drm_fbdev_cma_hotplug_event()

The drm_fbdev_cma_hotplug_event() function tests whether its argument
is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/dd9a16b1-234c-6776-e6d9-943a8457334e@users.sourceforge.net

drm/vc4: Delete unnecessary checks before two function calls

The following functions test whether their argument is NULL
and then return immediately.
* drm_fbdev_cma_hotplug_event
* drm_fbdev_cma_restore_mode

Thus the tests around their calls are not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/fb33d930-6a5c-c501-6676-26bd486f1cb5@users.sourceforge.net

drm/rockchip: Delete an unnecessary check before drm_gem_object_unreference_unlocked()

The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/b66399ed-278b-b85d-4a21-b34164936ef6@users.sourceforge.net

drm/bochs: Delete an unnecessary check before drm_gem_object_unreference_unlocked()

The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1e3a8c0d-e737-f092-727e-af7e3810b8dc@users.sourceforge.net

drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)

vGEM buffers are useful for passing data between software clients and
hardware renders. By allowing the user to create and attach fences to
the exported vGEM buffers (on the dma-buf), the user can implement a
deferred renderer and queue hardware operations like flipping and then
signal the buffer readiness (i.e. this allows the user to schedule
operations out-of-order, but have them complete in-order).

This also makes it much easier to write tightly controlled testcases for
dma-buf fencing and signaling between hardware drivers.

v2: Don't pretend the fences exist in an ordered timeline, but allocate
a separate fence-context for each fence so that the fences are
unordered.
v3: Make the debug output more interesting, and show the signaled status.
v4: Automatically signal the fence to prevent userspace from
indefinitely hanging drivers.

Testcase: igt/vgem_basic/dmabuf-fence
Testcase: igt/vgem_slow/nohang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Zach Reizner <zachr@google.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Zach Reizner <zachr@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468571471-12610-1-git-send-email-chris@chris-wilson.co.uk

Merge tag 'drm-vc4-next-2016-07-15' of https://github.com/anholt/linux into drm-next

This pull request brings in vc4 shader validation for branching,
allowing GLSL shaders with non-unrolled loops.

* tag 'drm-vc4-next-2016-07-15' of https://github.com/anholt/linux:
  drm/vc4: Fix a "the the" typo in a comment.
  drm/vc4: Fix definition of QPU_R_MS_REV_FLAGS
  drm/vc4: Add a getparam to signal support for branches.
  drm/vc4: Add support for branching in shader validation.
  drm/vc4: Add a bitmap of branch targets during shader validation.
  drm/vc4: Move validation's current/max ip into the validation struct.
  drm/vc4: Add a getparam ioctl for getting the V3D identity regs.

Merge tag 'drm/panel/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.8-rc1

This set of changes contains a few cleanups for existing panels as well
as improved handling of certain backlights. In addition there's support
for a few new simple panels.

* tag 'drm/panel/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Add support for Starry KR122EA0SRA panel
  dt-bindings: Add Starry KR122EA0SRA panel binding
  dt-bindings: Add vendor prefix for Starry
  dt-bindings: display: Add Sharp LQ101K1LY04 panel binding
  drm/panel: simple: Add support for Sharp LQ101K1LY04
  drm/panel: simple: Add support for LG LP079QX1-SP0V panel
  dt-bindings: Add support for LG LP079QX1-SP0V panel
  drm/panel: simple: Add support for Sharp LQ123P1JX31 panel
  dt-bindings: Add Sharp LQ123P1JX31 panel binding
  drm/panel: simple: Add support for Samsung LSN122DL01-C01 panel
  dt-bindings: Add Samsung LSN122DL01-C01 panel binding
  drm/panel: simple: Add support for LG LP097QX1-SPA1 panel
  dt-bindings: Add LG LP097QX1-SPA1 panel binding
  drm/panel: simple: Update backlight state property
  drm/panel: simple: Remove gratuitous blank line
  drm/panel: simple: Fix a couple of physical sizes

Merge tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v4.8-rc1

This set of changes contains a bunch of cleanups to the host1x driver as
well as the addition of a pin controller for DPAUX, which is required by
boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C
mode (for HDMI and DDC).

Included is also a bit of rework of the SOR driver in preparation to add
DisplayPort support as well as some refactoring and cleanup.

Finally, all output drivers are converted to runtime PM, which greatly
simplifies the handling of clocks and resets.

* tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: (35 commits)
  drm/tegra: sor: Reject HDMI 2.0 modes
  drm/tegra: sor: Prepare for generic PM domain support
  drm/tegra: dsi: Prepare for generic PM domain support
  drm/tegra: sor: Make XBAR configurable per SoC
  drm/tegra: sor: Use sor1_src clock to set parent for HDMI
  dt-bindings: display: tegra: Add source clock for SOR
  drm/tegra: sor: Implement sor1_brick clock
  drm/tegra: sor: Implement runtime PM
  drm/tegra: hdmi: Implement runtime PM
  drm/tegra: dsi: Implement runtime PM
  drm/tegra: dc: Implement runtime PM
  drm/tegra: hdmi: Enable audio over HDMI
  drm/tegra: sor: Do not support deep color modes
  drm/tegra: sor: Extract tegra_sor_mode_set()
  drm/tegra: sor: Split out tegra_sor_apply_config()
  drm/tegra: sor: Rename tegra_sor_calc_config()
  drm/tegra: sor: Factor out tegra_sor_set_parent_clock()
  drm/tegra: dpaux: Add pinctrl support
  dt-bindings: Add bindings for Tegra DPAUX pinctrl driver
  drm/tegra: Prepare DPAUX for supporting generic PM domains
  ...

Merge branch 'upstream/analogix-dp-20160705' of git://github.com/yakir-Yang/linux into drm-next

Please consider merging this tag, which contains the v4 misc fixes and add RK3399 eDP support patches[0] I sent on 2016-06-29, rebased onto v4.7-rc5.

* 'upstream/analogix-dp-20160705' of git://github.com/yakir-Yang/linux:
  dt-bindings: analogix_dp: rockchip: correct the wrong compatible name
  drm/rockchip: analogix_dp: introduce the pclk for grf
  drm/bridge: analogix_dp: fix no drm hpd event when panel plug in
  drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode
  drm/rockchip: analogix_dp: correct the connector display color format and bpc
  drm/bridge: analogix_dp: passing the connector as an argument in .get_modes()
  drm/rockchip: analogix_dp: make panel detect to an optional action
  drm/rockchip: analogix_dp: add rk3399 eDP support
  drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit setting
  drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1
  drm/rockchip: analogix_dp: split the lcdc select setting into device data

Merge tag 'imx-drm-next-2016-07-14' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm updates

- atomic mode setting conversion
- replace DMFC FIFO allocation mechanism with a fixed allocation
  that is good enough for all cases
- support for external bridges connected to parallel-display
- improved error handling in imx-ldb, imx-tve, and parallel-display
- some code cleanup in imx-tve

* tag 'imx-drm-next-2016-07-14' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: parallel-display: add bridge support
  drm/imx: parallel-display: check return code from of_get_drm_display_mode()
  gpu: ipu-v3: ipu-dc: don't bug out on invalid bus_format
  drm/imx: imx-tve: fix the error message
  drm/imx: imx-tve: remove unneeded 'or' operation
  drm/imx: imx-tve: check the value returned by regulator_set_voltage()
  drm/imx: imx-ldb: check return code on panel attach
  drm/imx: turn remaining container_of macros into inline functions
  drm/imx: store internal bus configuration in crtc state
  drm/imx: remove empty mode_set encoder callbacks
  drm/imx: atomic phase 3 step 3: Advertise DRIVER_ATOMIC
  drm/imx: atomic phase 3 step 2: Legacy callback fixups
  drm/bridge: dw-hdmi: Remove the legacy drm_connector_funcs structure
  drm/imx: atomic phase 3 step 1: Use atomic configuration
  drm/imx: Remove encoders' ->prepare callbacks
  drm/imx: atomic phase 2 step 2: Track plane_state->fb correctly in ->page_flip
  drm/imx: atomic phase 2 step 1: Wire up state ->reset, ->duplicate and ->destroy
  drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers
  gpu: ipu-v3: ipu-dmfc: Use static DMFC FIFO allocation mechanism
  drm/imx: ipuv3 plane: Check different types of plane separately

drm/vc4: Fix a "the the" typo in a comment.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Fix definition of QPU_R_MS_REV_FLAGS

We don't use it in shader validation currently, so it had no effect,
but best to fix it anyway in case we do some day.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add a getparam to signal support for branches.

Userspace needs to know if it can create shaders that do branching.
Otherwise, for backwards compatibility with old kernels it needs to
lower if statements to conditional assignments.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add support for branching in shader validation.

We're already checking that branch instructions are between the start
of the shader and the proper PROG_END sequence.  The other thing we
need to make branching safe is to verify that the shader doesn't read
past the end of the uniforms stream.

To do that, we require that at any basic block reading uniforms have
the following instructions:

load_imm temp, <next offset within uniform stream>
add unif_addr, temp, unif

The instructions are generated by userspace, and the kernel verifies
that the load_imm is of the expected offset, and that the add adds it
to a uniform.  We track which uniform in the stream that is, and at
draw call time fix up the uniform stream to have the address of the
start of the shader's uniforms at that location.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add a bitmap of branch targets during shader validation.

This isn't used yet, it's just a first step toward loop validation.
During the main parsing of instructions, we need to know when we hit a
new basic block so that we can reset validated state.

v2: Fix a stray semicolon after an if block.  (caught by kbuild test).

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/nouveau: make fbdev support really optional

Currently enabling Nouveau DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/atmel-hlcdc: make fbdev support really optional

Currently enabling ATMEL HLCDC DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/rcar-du: make fbdev support really optional

Currently enabling R-Car DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/rockchip: make fbdev support really optional

Currently enabling Rockchip DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

gpu: drm: arcpgu_drv: add missing of_node_put after calling of_parse_phandle

of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

gpu: drm: exynos_hdmi: add missing of_node_put after calling of_parse_phandle

of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle

of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

gpu: drm: omapdrm: connector-dvi: add missing of_node_put after calling of_parse_phandle

of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

   This pull request adds to the rework patch series for IOMMU
   integration to support ARM64bit architecture with DMA-IOMMU
   glue code.

   With this patch series, Exynos DRM works well on Exynos5433 SoC
   with IOMMU enabled.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: iommu: add support for ARM64 specific code for IOMMU glue
  drm/exynos: iommu: move ARM specific code to exynos_drm_iommu.h
  drm/exynos: iommu: remove unused entries from exynos_drm_private strcuture
  drm/exynos: iommu: add a check if all sub-devices have iommu controller
  drm/exynos: iommu: move dma_params configuration code to separate functions

Merge tag 'drm-vc4-next-2016-07-12' of https://github.com/anholt/linux into drm-next

This pull request brings in new vc4 plane formats for Android, precise
vblank timestamping, and a couple of small cleanups.

* tag 'drm-vc4-next-2016-07-12' of https://github.com/anholt/linux:
  drm/vc4: remove redundant ret status check
  drm/vc4: Implement precise vblank timestamping.
  drm/vc4: Bind the HVS before we bind the individual CRTCs.
  gpu: drm: vc4_hdmi: add missing of_node_put after calling of_parse_phandle
  drm: vc4: enable XBGR8888 and ABGR8888 pixel formats
  drm/vc4: clean up error exit path on failed dpi_connector allocation

Merge tag 'drm-intel-next-2016-07-11' of git://anongit.freedesktop.org/drm-intel into drm-next

- select igt testing depencies for CONFIG_DRM_I915_DEBUG (Chris)
- track outputs in crtc state and clean up all our ad-hoc connector/encoder
  walking in modest code (Ville)
- demidlayer drm_device/drm_i915_private (Chris Wilson)
- thundering herd fix from Chris Wilson, with lots of help from Tvrtko Ursulin
- piles of assorted clean and fallout from the thundering herd fix
- documentation and more tuning for waitboosting (Chris)
- pooled EU support on bxt (Arun Siluvery)
- bxt support is no longer considered prelimary!
- ring/engine vfunc cleanup from Tvrtko
- introduce intel_wait_for_register helper (Chris)
- opregion updates (Jani Nukla)
- tuning and fixes for wait_for macros (Tvrkto&Imre)
- more kabylake pci ids (Rodrigo)
- pps cleanup and fixes for bxt (Imre)
- move sink crc support over to atomic state (Maarten)
- fix up async fbdev init ordering (Chris)
- fbc fixes from Paulo and Chris

* tag 'drm-intel-next-2016-07-11' of git://anongit.freedesktop.org/drm-intel: (223 commits)
  drm/i915: Update DRIVER_DATE to 20160711
  drm/i915: Select DRM_VGEM for igt
  drm/i915: Select X86_MSR for igt
  drm/i915: Fill unused GGTT with scratch pages for VT-d
  drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.
  drm/i915:gen9: implement WaMediaPoolStateCmdInWABB
  drm/i915: Check for invalid cloning earlier during modeset
  drm/i915: Simplify hdmi_12bpc_possible()
  drm/i915: Kill has_dsi_encoder
  drm/i915: s/INTEL_OUTPUT_DISPLAYPORT/INTEL_OUTPUT_DP/
  drm/i915: Replace some open coded intel_crtc_has_dp_encoder()s
  drm/i915: Kill has_dp_encoder from pipe_config
  drm/i915: Replace manual lvds and sdvo/hdmi counting with intel_crtc_has_type()
  drm/i915: Unify intel_pipe_has_type() and intel_pipe_will_have_type()
  drm/i915: Add output_types bitmask into the crtc state
  drm/i915: Remove encoder type checks from MST suspend/resume
  drm/i915: Don't mark eDP encoders as MST capable
  drm/i915: avoid wait_for_atomic() in non-atomic host2guc_action()
  drm/i915: Group the irq breadcrumb variables into the same cacheline
  drm/i915: Wake up the bottom-half if we steal their interrupt
  ...

Merge tag 'topic/drm-misc-2016-07-14' of git://anongit.freedesktop.org/drm-intel into drm-next

I recovered dri-devel backlog from my vacation, more misc stuff:
- of_put_node fixes from Peter Chen (not all yet)
- more patches from Gustavo to use kms-native drm_crtc_vblank_* funcs
- docs sphinxification from Lukas Wunner
- bunch of fixes all over from Dan Carpenter
- more follow up work from Chris register/unregister rework in various
  places
- vgem dma-buf export (for writing testcases)
- small things all over from tons of different people

* tag 'topic/drm-misc-2016-07-14' of git://anongit.freedesktop.org/drm-intel: (52 commits)
  drm: Don't overwrite user ioctl arg unless requested
  dma-buf/sync_file: improve Kconfig description for Sync Files
  MAINTAINERS: add entry for the Sync File Framework
  drm: Resurrect atomic rmfb code
  drm/vgem: Use PAGE_KERNEL in place of x86-specific PAGE_KERNEL_IO
  qxl: silence uninitialized variable warning
  qxl: check for kmap failures
  vga_switcheroo: Sphinxify docs
  drm: Restore double clflush on the last partial cacheline
  gpu: drm: rockchip_drm_drv: add missing of_node_put after calling of_parse_phandle
  gpu: drm: sti_vtg: add missing of_node_put after calling of_parse_phandle
  gpu: drm: sti_hqvdp: add missing of_node_put after calling of_parse_phandle
  gpu: drm: sti_vdo: add missing of_node_put after calling of_parse_phandle
  gpu: drm: sti_compositor: add missing of_node_put after calling of_parse_phandle
  drm/tilcdc: use drm_crtc_handle_vblank()
  drm/rcar-du: use drm_crtc_handle_vblank()
  drm/nouveau: use drm_crtc_handle_vblank()
  drm/atmel: use drm_crtc_handle_vblank()
  drm/armada: use drm_crtc_handle_vblank()
  drm: make drm_vblank_count_and_time() static
  ...

drm/vc4: Move validation's current/max ip into the validation struct.

Reduces the argument count for some of the functions, and will be used
more with the upcoming looping support.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add a getparam ioctl for getting the V3D identity regs.

As I extend the driver to support different V3D revisions, userspace
needs to know what version it's targeting.  This is most easily
detected using the V3D identity registers.

v2: Make sure V3D is runtime PM on when reading the registers.
v3: Switch to a 64-bit param value (suggested by Rob Clark in review)

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Rob Clark <robdclark@gmail.com> (v3, over irc)

Revert "drm: Resurrect atomic rmfb code"

This reverts commit 11c21e73f848844d439cbccb42a1018b8c560e5c.

For reasons totally unclear this manages to wreak havoc with the audio
rpm refcount:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 215 at drivers/gpu/drm/i915/intel_runtime_pm.c:1729 intel_display_power_put+0xe8/0x100 [i915]
Use count on domain AUDIO is already zero
Modules linked in: i915 ax88179_178a usbnet mii snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_hda_core co
f_pclmul crc32_pclmul snd_pcm ghash_clmulni_intel mei_me mei e1000e ptp pps_core i2c_hid [last unloaded: i915]
CPU: 0 PID: 215 Comm: kworker/0:2 Not tainted 4.7.0-rc6+ #44
Hardware name: Intel Corporation Skylake Client platform/Skylake Halo DDR4 RVP11, BIOS SKLSE2R1.R00.X106.B00.1601180206 01/18/2016
Workqueue: events output_poll_execute
 0000000000000000 ffff88045573fa38 ffffffff813a2d6b ffff88045573fa88
 0000000000000000 ffff88045573fa78 ffffffff81075db6 000006c15a590000
 ffff88045a59a238 ffff88045a590054 ffff88045a590000 ffff88045a590000
Call Trace:
 [<ffffffff813a2d6b>] dump_stack+0x4d/0x72
 [<ffffffff81075db6>] __warn+0xc6/0xe0
 [<ffffffff81075e1a>] warn_slowpath_fmt+0x4a/0x50
 [<ffffffffa046399d>] ? hsw_audio_codec_disable+0xdd/0x110 [i915]
 [<ffffffffa041e638>] intel_display_power_put+0xe8/0x100 [i915]
 [<ffffffffa049d776>] intel_disable_ddi+0x46/0x80 [i915]
 [<ffffffffa0474eef>] haswell_crtc_disable+0x16f/0x290 [i915]
 [<ffffffffa047cb53>] intel_atomic_commit_tail+0x153/0x10e0 [i915]
 [<ffffffff814aa020>] ? drm_atomic_helper_swap_state+0x140/0x2d0
 [<ffffffffa047dedd>] intel_atomic_commit+0x3fd/0x520 [i915]
 [<ffffffff814d0252>] ? drm_atomic_add_affected_connectors+0x22/0xf0
 [<ffffffff814cf8a2>] drm_atomic_commit+0x32/0x50
 [<ffffffff814aed07>] restore_fbdev_mode+0x147/0x260
 [<ffffffff814b026e>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70
 [<ffffffff814b02d8>] drm_fb_helper_set_par+0x28/0x50
 [<ffffffff814b0203>] drm_fb_helper_hotplug_event+0x143/0x180
 [<ffffffffa0498ab5>] intel_fbdev_output_poll_changed+0x15/0x20 [i915]
 [<ffffffff814a1f92>] drm_kms_helper_hotplug_event+0x22/0x30
 [<ffffffff814a2172>] output_poll_execute+0x192/0x1e0
 [<ffffffff8108cf7c>] process_one_work+0x14c/0x480
 [<ffffffff8108d4fa>] worker_thread+0x24a/0x4e0
 [<ffffffff8108d2b0>] ? process_one_work+0x480/0x480
 [<ffffffff8108d2b0>] ? process_one_work+0x480/0x480
 [<ffffffff81092904>] kthread+0xc4/0xe0
 [<ffffffff8173013f>] ret_from_fork+0x1f/0x40
 [<ffffffff81092840>] ? kthread_worker_fn+0x180/0x180
---[ end trace 2d440da5f0c053e4 ]---

Instead of scratching heads too much while CI is down, let's revert
before more trouble is caused.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468502194-17029-1-git-send-email-daniel.vetter@ffwll.ch

drm/tegra: sor: Reject HDMI 2.0 modes

Enabling HDMI 2.0 modes requires extra programming and will not work
with the current driver, so reject all those modes.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: sor: Prepare for generic PM domain support

The SOR driver for Tegra requires the SOR power partition to be enabled.
Now that Tegra supports the generic PM domain framework we manage the
SOR power partition via this framework. However, the sequence for
gating/ungating the SOR power partition requires that the SOR reset is
asserted/de-asserted at the time the SOR power partition is
gated/ungated, respectively. Now that the reset control core assumes
that resets are exclusive, the Tegra generic PM domain code and the SOR
driver cannot request the same reset unless we mark the reset as shared.
Sharing resets will not work in this case because we cannot guarantee
that the reset will be asserted/de-asserted at the appropriate time.
Therefore, given that the Tegra generic PM domain code will handle the
resets, do not request the reset in the SOR driver if the SOR device has
a PM domain associated.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: dsi: Prepare for generic PM domain support

The DSI driver for Tegra requires the SOR power partition to be enabled.
Now that Tegra supports the generic PM domain framework we manage the
SOR power partition via this framework. However, the sequence for
gating/ungating the SOR power partition requires that the DSI reset is
asserted/de-asserted at the time the SOR power partition is
gated/ungated, respectively. Now that the reset control core assumes
that resets are exclusive, the Tegra generic PM domain code and the DSI
driver cannot request the same reset unless we mark the reset as shared.
Sharing resets will not work in this case because we cannot guarantee
that the reset will be asserted/de-asserted at the appropriate time.
Therefore, given that the Tegra generic PM domain code will handle the
resets, do not request the reset in the DSI driver if the DSI device has
a PM domain associated.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: sor: Make XBAR configurable per SoC

Provide a per-SoC mapping of lanes which can be used to configure the
XBAR.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: sor: Use sor1_src clock to set parent for HDMI

When running in HDMI mode, the sor1 IP block needs to use the sor1_src
as parent clock, and in turn configure the sor1_src to use pll_d2_out0
as its parent.

Signed-off-by: Thierry Reding <treding@nvidia.com>

dt-bindings: display: tegra: Add source clock for SOR

The SOR clock can have various sources, with the most commonly used
being the sor_safe, pll_d2_out0, pll_dp and sor_brick clocks. These
are configured using a three level mux, of which the first 2 levels
can be treated as one. The direct parents of the SOR clock are the
sor_safe, sor_brick and sor_src clocks, whereas the pll_d2_out0 and
pll_dp clocks can be selected as parents of the sor_src clock via a
second mux.

Previous generations of Tegra have only supported eDP and LVDS with
the SOR, where LVDS was never used on publicly available hardware.
Clocking for this only ever required the first level mux (to select
between sor_safe and sor_brick).

Tegra210 has a new revision of the SOR that supports HDMI and hence
needs to support the second level mux to allow selecting pll_d2_out0
as the SOR clock's parent. This second mux is knows as sor_src, and
operating system software needs a reference to it in order to select
the proper parent.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: sor: Implement sor1_brick clock

sor1_brick is a clock that can be used as a source for the sor1 clock.
The registers to control the clock output are part of the sor1 IP block
and hence the sor driver is the best place to implement it.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/imx: parallel-display: add bridge support

Add support for bridge chips connected externally to the i.MX
DISP0/DISP1 DPI interfaces.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm: Don't overwrite user ioctl arg unless requested

Currently, we completely ignore the user when it comes to the in/out
direction of the ioctl argument, as we simply cannot trust userspace.
(For example, they might request a copy of the modified ioctl argument
when the driver is not expecting such and so leak kernel stack.)
However, blindly copying over the target address may also lead to a
spurious EFAULT, and a failure after the ioctl was completed
successfully. This is important in order to avoid an ABI break when
extending an ioctl from IOR to IORW. Similar to how we only copy the
intersection of the kernel arg size and the user arg size, we only want
to copy back the kernel arg data iff both the kernel and userspace
request the copy.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468335590-21023-1-git-send-email-chris@chris-wilson.co.uk

Merge branch 'linux-4.8' of git://github.com/skeggsb/linux into drm-next

Here's an initial drm-next pull for nouveau 4.8, highlights:
- GK20A/GM20B volt and clock improvements.
- Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.

* 'linux-4.8' of git://github.com/skeggsb/linux: (97 commits)
  drm/nouveau/bus: remove cpu_coherent flag
  drm/nouveau/ttm: remove special handling of coherent objects
  drm/nouveau: check for supported chipset before booting fbdev off the hw
  drm/nouveau/ce/gp104: initial support
  drm/nouveau/fifo/gp104: initial support
  drm/nouveau/disp/gp104: initial support
  drm/nouveau/dma/gp104: initial support
  drm/nouveau/ltc/gp104: initial support
  drm/nouveau/ibus/gp104: initial support
  drm/nouveau/i2c/gp104: initial support
  drm/nouveau/gpio/gp104: initial support
  drm/nouveau/fuse/gp104: initial support
  drm/nouveau/bus/gp104: initial support
  drm/nouveau/bar/gp104: initial support
  drm/nouveau/mmu/gp104: initial support
  drm/nouveau/fb/gp104: initial support
  drm/nouveau/imem/gp104: initial support
  drm/nouveau/devinit/gp104: initial support
  drm/nouveau/bios/gp104: initial support
  drm/nouveau/tmr/gp104: initial support
  ...

drm/nouveau/bus: remove cpu_coherent flag

This flag's only remaining function is to ignore the uncached flag for
BOs on coherent architectures.

However the reason for allocating an object uncache on a non-coherent
architecture (namely because the cost of doing explicit flushes/
invalidations is higher than the benefit of caching the data because
accesses are few and far between) should also apply on architectures for
which coherency is maintained implicitly. Thus allocate coherent objects
as uncached on all architectures.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ttm: remove special handling of coherent objects

TTM-allocated coherent objects were populated using the DMA API and
accessed using the mapping it returned to workaround coherency
issues. These issues seem to have been solved, thus remove this extra
case to handle and use the regular kernel mapping functions.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: check for supported chipset before booting fbdev off the hw

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

drm/nouveau/ce/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/dma/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ltc/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ibus/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/i2c/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gpio/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fuse/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bus/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bar/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fb/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/imem/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/devinit/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/tmr/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pci/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/top/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: recognise GP104 chipset

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/sw/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ce/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>