From 4423f3b0d96a40ff7f1c2552b1e23c3c3eadcbe8 Mon Sep 17 00:00:00 2001 From: "Kim, Leo" Date: Tue, 28 Jul 2015 17:47:38 +0900 Subject: [PATCH] staging: wilc1000: remove warnings on the multiple blank lines uses This patch removes the warnings reported by checkpatch.pl for using multiple blank lines. Signed-off-by: Kim, Leo Signed-off-by: Tony Cho Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wilc1000/linux_wlan.c | 69 --------------------------- 1 file changed, 69 deletions(-) diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c index a4589b799db9..d012af5f1fb5 100644 --- a/drivers/staging/wilc1000/linux_wlan.c +++ b/drivers/staging/wilc1000/linux_wlan.c @@ -102,7 +102,6 @@ static int linux_wlan_device_detection(int on_off) return 0; } - #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr); @@ -115,7 +114,6 @@ static struct notifier_block g_dev_notifier = { if (g_linux_wlan->oup.wlan_cleanup != NULL) \ g_linux_wlan->oup.wlan_cleanup(); } - #ifndef STA_FIRMWARE #define STA_FIRMWARE "wifi_firmware.bin" #endif @@ -128,15 +126,12 @@ static struct notifier_block g_dev_notifier = { #define P2P_CONCURRENCY_FIRMWARE "wifi_firmware_p2p_concurrency.bin" #endif - - typedef struct android_wifi_priv_cmd { char *buf; int used_len; int total_len; } android_wifi_priv_cmd; - #define IRQ_WAIT 1 #define IRQ_NO_WAIT 0 /* @@ -157,7 +152,6 @@ void linux_wlan_unlock(void *vp); extern void WILC_WFI_monitor_rx(uint8_t *buff, uint32_t size); extern void WILC_WFI_p2p_rx(struct net_device *dev, uint8_t *buff, uint32_t size); - static void *internal_alloc(uint32_t size, uint32_t flag); static void linux_wlan_tx_complete(void *priv, int status); void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset); @@ -169,8 +163,6 @@ static struct net_device_stats *mac_stats(struct net_device *dev); static int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd); static void wilc_set_multicast_list(struct net_device *dev); - - /* * for now - in frmw_to_linux there should be private data to be passed to it * and this data should be pointer to net device @@ -199,8 +191,6 @@ volatile int WatchDogdebuggerCounter; char DebugBuffer[DEGUG_BUFFER_LENGTH + 20] = {0}; static char *ps8current = DebugBuffer; - - void printk_later(const char *format, ...) { va_list args; @@ -212,7 +202,6 @@ void printk_later(const char *format, ...) } - void dump_logs() { if (DebugBuffer[0]) { @@ -244,11 +233,8 @@ static int DebuggingThreadTask(void *vp) WatchDogdebuggerCounter = 0; } } - - #endif - #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr) { @@ -296,7 +282,6 @@ static int dev_state_ev_handler(struct notifier_block *this, unsigned long event PRINT_INFO(GENERIC_DBG, "\n ============== IP Address Obtained ===============\n\n"); - /*If we are in station mode or client mode*/ if (nic->iftype == STATION_MODE || nic->iftype == CLIENT_MODE) { pstrWFIDrv->IFC_UP = 1; @@ -305,8 +290,6 @@ static int dev_state_ev_handler(struct notifier_block *this, unsigned long event PRINT_D(GENERIC_DBG, "IP obtained , enable scan\n"); } - - if (bEnablePS) host_int_set_power_mgmt((WILC_WFIDrvHandle)pstrWFIDrv, 1, 0); @@ -332,7 +315,6 @@ static int dev_state_ev_handler(struct notifier_block *this, unsigned long event resolve_disconnect_aberration(pstrWFIDrv); - PRINT_D(GENERIC_DBG, "[%s] Down IP\n", dev_iface->ifa_label); pIP_Add_buff = null_ip; @@ -385,8 +367,6 @@ void linux_wlan_disable_irq(int wait) #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO) static irqreturn_t isr_uh_routine(int irq, void *user_data) { - - int_rcvdU++; #if (RX_BH_TYPE != RX_BH_THREADED_IRQ) linux_wlan_disable_irq(IRQ_NO_WAIT); @@ -438,9 +418,6 @@ static void isr_bh_routine(struct work_struct *work) #else return; #endif - - - } int_rcvdB++; @@ -451,7 +428,6 @@ static void isr_bh_routine(struct work_struct *work) PRINT_ER("wlan_handle_rx_isr() hasn't been initialized\n"); } - #if (RX_BH_TYPE == RX_BH_THREADED_IRQ) return IRQ_HANDLED; #endif @@ -485,7 +461,6 @@ static int isr_bh_routine(void *vp) } #endif - #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO) static int init_irq(linux_wlan_t *p_nic) { @@ -516,7 +491,6 @@ static int init_irq(linux_wlan_t *p_nic) PRINT_ER("could not obtain gpio for WILC_INTR\n"); } - #if (RX_BH_TYPE == RX_BH_THREADED_IRQ) if ((ret != -1) && (request_threaded_irq(nic->dev_irq_num, isr_uh_routine, isr_bh_routine, IRQF_TRIGGER_LOW | IRQF_ONESHOT, /*Without IRQF_ONESHOT the uh will remain kicked in and dont gave a chance to bh*/ @@ -552,7 +526,6 @@ static void deinit_irq(linux_wlan_t *nic) #endif } - /* * OS functions */ @@ -599,7 +572,6 @@ void linux_wlan_free(void *vp) } } - static void *internal_alloc(uint32_t size, uint32_t flag) { char *pntr = NULL; @@ -608,7 +580,6 @@ static void *internal_alloc(uint32_t size, uint32_t flag) return (void *)pntr; } - static void linux_wlan_init_lock(char *lockName, void *plock, int count) { sema_init((struct semaphore *)plock, count); @@ -654,7 +625,6 @@ void linux_wlan_unlock(void *vp) } } - static void linux_wlan_init_mutex(char *lockName, void *plock, int count) { mutex_init((struct mutex *)plock); @@ -700,7 +670,6 @@ static void linux_wlan_unlock_mutex(void *vp) } } - /*Added by Amr - BugID_4720*/ static void linux_wlan_init_spin_lock(char *lockName, void *plock, int count) { @@ -938,7 +907,6 @@ int linux_wlan_get_firmware(perInterface_wlan_t *p_nic) const struct firmware *wilc_firmware; char *firmware; - if (nic->iftype == AP_MODE) firmware = AP_FIRMWARE; else if (nic->iftype == STATION_MODE) @@ -950,8 +918,6 @@ int linux_wlan_get_firmware(perInterface_wlan_t *p_nic) firmware = P2P_CONCURRENCY_FIRMWARE; } - - if (nic == NULL) { PRINT_ER("NIC is NULL\n"); goto _fail_; @@ -962,7 +928,6 @@ int linux_wlan_get_firmware(perInterface_wlan_t *p_nic) goto _fail_; } - /* the firmare should be located in /lib/firmware in * root file system with the name specified above */ @@ -1061,7 +1026,6 @@ _FAIL_: return ret; } - /* startup configuration - could be changed later using iconfig*/ static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_nic) { @@ -1087,7 +1051,6 @@ static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_n PRINT_D(INIT_DBG, "MAC address is : %02x-%02x-%02x-%02x-%02x-%02x\n", mac_add[0], mac_add[1], mac_add[2], mac_add[3], mac_add[4], mac_add[5]); wilc_get_chipid(0); - if (g_linux_wlan->oup.wlan_cfg_set == NULL) { PRINT_D(INIT_DBG, "Null p[ointer\n"); goto _fail_; @@ -1107,7 +1070,6 @@ static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_n if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BSS_TYPE, c_val, 1, 0, 0)) goto _fail_; - /* c_val[0] = RATE_AUTO; / * bug 4275: Enable autorate and limit it to 24Mbps * / */ c_val[0] = RATE_AUTO; if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0)) @@ -1342,7 +1304,6 @@ _fail_: return -1; } - /**************************/ void wilc1000_wlan_deinit(linux_wlan_t *nic) { @@ -1376,7 +1337,6 @@ void wilc1000_wlan_deinit(linux_wlan_t *nic) #endif #endif - /* not sure if the following unlocks are needed or not*/ if (&g_linux_wlan->rxq_event != NULL) linux_wlan_unlock(&g_linux_wlan->rxq_event); @@ -1384,7 +1344,6 @@ void wilc1000_wlan_deinit(linux_wlan_t *nic) if (&g_linux_wlan->txq_event != NULL) linux_wlan_unlock(&g_linux_wlan->txq_event); - #if (RX_BH_TYPE == RX_BH_WORK_QUEUE) /*Removing the work struct from the linux kernel workqueue*/ if (&g_linux_wlan->rx_work_queue != NULL) @@ -1401,7 +1360,6 @@ void wilc1000_wlan_deinit(linux_wlan_t *nic) PRINT_D(INIT_DBG, "Deinitializing IRQ\n"); deinit_irq(g_linux_wlan); - if (&g_linux_wlan->oup != NULL) { if (g_linux_wlan->oup.wlan_stop != NULL) g_linux_wlan->oup.wlan_stop(); @@ -1662,17 +1620,14 @@ static void wlan_deinitialize_threads(linux_wlan_t *nic) if (&g_linux_wlan->rxq_event != NULL) linux_wlan_unlock(&g_linux_wlan->rxq_event); - if (g_linux_wlan->rxq_thread != NULL) { kthread_stop(g_linux_wlan->rxq_thread); g_linux_wlan->rxq_thread = NULL; } - if (&g_linux_wlan->txq_event != NULL) linux_wlan_unlock(&g_linux_wlan->txq_event); - if (g_linux_wlan->txq_thread != NULL) { kthread_stop(g_linux_wlan->txq_thread); g_linux_wlan->txq_thread = NULL; @@ -1872,7 +1827,6 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic) /*Save the oup structre into global pointer*/ gpstrWlanOps = &g_linux_wlan->oup; - ret = wlan_initialize_threads(nic); if (ret < 0) { PRINT_ER("Initializing Threads FAILED\n"); @@ -1910,7 +1864,6 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic) goto _fail_irq_enable_; } - /*Download firmware*/ ret = linux_wlan_firmware_download(g_linux_wlan); if (ret < 0) { @@ -1950,7 +1903,6 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic) g_linux_wlan->wilc1000_initialized = 1; return 0; /*success*/ - _fail_fw_start_: if (&g_linux_wlan->oup != NULL) { if (g_linux_wlan->oup.wlan_stop != NULL) @@ -1979,7 +1931,6 @@ _fail_locks_: return ret; } - /* * - this function will be called automatically by OS when module inserted. */ @@ -2011,7 +1962,6 @@ int mac_init_fn(struct net_device *ndev) } #endif - void WILC_WFI_frame_register(struct wiphy *wiphy, struct net_device *dev, u16 frame_type, bool reg); @@ -2075,7 +2025,6 @@ int mac_open(struct net_device *ndev) goto _err_; } - WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev, nic->g_struct_frame_reg[0].frame_type, nic->g_struct_frame_reg[0].reg); WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev, @@ -2114,7 +2063,6 @@ struct net_device_stats *mac_stats(struct net_device *dev) { perInterface_wlan_t *nic = netdev_priv(dev); - return &nic->netstats; } @@ -2129,7 +2077,6 @@ static void wilc_set_multicast_list(struct net_device *dev) priv = wiphy_priv(dev->ieee80211_ptr->wiphy); pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv; - if (!dev) return; @@ -2250,7 +2197,6 @@ int mac_xmit(struct sk_buff *skb, struct net_device *ndev) QueueCount = WILC_Xmit_data((void *)tx_data, HOST_TO_WLAN); #endif /* WILC_FULLY_HOSTING_AP */ - if (QueueCount > FLOW_CONTROL_UPPER_THRESHOLD) { netif_stop_queue(g_linux_wlan->strInterfaceInfo[0].wilc_netdev); netif_stop_queue(g_linux_wlan->strInterfaceInfo[1].wilc_netdev); @@ -2259,7 +2205,6 @@ int mac_xmit(struct sk_buff *skb, struct net_device *ndev) return 0; } - int mac_close(struct net_device *ndev) { struct WILC_WFI_priv *priv; @@ -2282,8 +2227,6 @@ int mac_close(struct net_device *ndev) pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv; - - PRINT_D(GENERIC_DBG, "Mac close\n"); if (g_linux_wlan == NULL) { @@ -2329,7 +2272,6 @@ int mac_close(struct net_device *ndev) return 0; } - int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd) { @@ -2340,8 +2282,6 @@ int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd) struct WILC_WFI_priv *priv; s32 s32Error = WILC_SUCCESS; - - /* struct iwreq *wrq = (struct iwreq *) req; // tony moved to case SIOCSIWPRIV */ #ifdef USE_WIRELESS nic = netdev_priv(ndev); @@ -2435,7 +2375,6 @@ void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset) frame_len = size; buff_to_send = buff; - /* Need to send the packet up to the host, allocate a skb buffer */ skb = dev_alloc_skb(frame_len); if (skb == NULL) { @@ -2600,7 +2539,6 @@ int wilc_netdev_init(void) } #endif - if (register_netdev(ndev)) { PRINT_ER("Device couldn't be registered - %s\n", ndev->name); return -1; /* ERROR */ @@ -2624,12 +2562,9 @@ int wilc_netdev_init(void) return 0; } - /*The 1st function called after module inserted*/ static int __init init_wilc_driver(void) { - - #if defined (WILC_DEBUGFS) if (wilc_debugfs_init() < 0) { PRINT_D(GENERIC_DBG, "fail to create debugfs for wilc driver\n"); @@ -2679,13 +2614,11 @@ static void __exit exit_wilc_driver(void) nic[i] = netdev_priv(g_linux_wlan->strInterfaceInfo[i].wilc_netdev); } - if ((g_linux_wlan != NULL) && g_linux_wlan->wilc_firmware != NULL) { release_firmware(g_linux_wlan->wilc_firmware); g_linux_wlan->wilc_firmware = NULL; } - if ((g_linux_wlan != NULL) && (((g_linux_wlan->strInterfaceInfo[0].wilc_netdev) != NULL) || ((g_linux_wlan->strInterfaceInfo[1].wilc_netdev) != NULL))) { PRINT_D(INIT_DBG, "Waiting for mac_close ....\n"); @@ -2695,7 +2628,6 @@ static void __exit exit_wilc_driver(void) else PRINT_D(INIT_DBG, "mac_closed\n"); - for (i = 0; i < NUM_CONCURRENT_IFC; i++) { /* close all opened interfaces */ if (g_linux_wlan->strInterfaceInfo[i].wilc_netdev != NULL) { @@ -2715,7 +2647,6 @@ static void __exit exit_wilc_driver(void) } } - #ifdef USE_WIRELESS #ifdef WILC_AP_EXTERNAL_MLME /* Bug 4600 : WILC_WFI_deinit_mon_interface was already called at mac_close */ -- 2.20.1