From aff0df0593f4beea42800115c0658f58c03dfe9f Mon Sep 17 00:00:00 2001 From: Alan Date: Mon, 27 Nov 2006 16:25:51 +0000 Subject: [PATCH] [PATCH] pata_hpt3x3: suspend/resume support Again split the chipset init away and call it both on resume and on setup Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt3x3.c | 46 +++++++++++++++++++++++++++++---------- 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index d216cc564b56..e9fb029f28b7 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -23,7 +23,7 @@ #include #define DRV_NAME "pata_hpt3x3" -#define DRV_VERSION "0.4.1" +#define DRV_VERSION "0.4.2" static int hpt3x3_probe_init(struct ata_port *ap) { @@ -120,6 +120,8 @@ static struct scsi_host_template hpt3x3_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, }; static struct ata_port_operations hpt3x3_port_ops = { @@ -157,6 +159,27 @@ static struct ata_port_operations hpt3x3_port_ops = { .host_stop = ata_host_stop }; +/** + * hpt3x3_init_chipset - chip setup + * @dev: PCI device + * + * Perform the setup required at boot and on resume. + */ + +static void hpt3x3_init_chipset(struct pci_dev *dev) +{ + u16 cmd; + /* Initialize the board */ + pci_write_config_word(dev, 0x80, 0x00); + /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & PCI_COMMAND_MEMORY) + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0); + else + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); +} + + /** * hpt3x3_init_one - Initialise an HPT343/363 * @dev: PCI device @@ -178,21 +201,18 @@ static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt3x3_port_ops }; static struct ata_port_info *port_info[2] = { &info, &info }; - u16 cmd; - - /* Initialize the board */ - pci_write_config_word(dev, 0x80, 0x00); - /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */ - pci_read_config_word(dev, PCI_COMMAND, &cmd); - if (cmd & PCI_COMMAND_MEMORY) - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0); - else - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); + hpt3x3_init_chipset(dev); /* Now kick off ATA set up */ return ata_pci_init_one(dev, port_info, 2); } +static int hpt3x3_reinit_one(struct pci_dev *dev) +{ + hpt3x3_init_chipset(dev); + return ata_pci_device_resume(dev); +} + static const struct pci_device_id hpt3x3[] = { { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), }, @@ -203,7 +223,9 @@ static struct pci_driver hpt3x3_pci_driver = { .name = DRV_NAME, .id_table = hpt3x3, .probe = hpt3x3_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = hpt3x3_reinit_one, }; static int __init hpt3x3_init(void) -- 2.20.1